Europe’s #1 for fingerprint access solutions
Finger Scanner Portfolio 2012 ekey home | ekey multi
Your finger is the key
Portfolio FINGER SCANNER DESIGNS
Product Overview finger scanner
wall-mounted
finger scanner
outlet-mounted
finger scanner
intercommunication
integra
system
SYSTEMS
Systems ekey home/ekey multi/ekey net support all ekey finger scanners in any design and all electromechanical locking systems!
ekey home
ekey net
ekey multi GARAGE DOOR
GARAGE DOOR
FRONT DOOR
GARAGE DOOR
FRONT DOOR
FRONT DOOR
INTERNAL DOORS
DOOR
INTERNAL DOORS
Stand-alone solution
Extended stand-alone solution
Networkable solution
1 finger scanner connected to 1 control panel
1 to 4 finger scanners connected to 1 control panel
• 99 fingers can be stored • 1, 2 or 3 relay outputs • Simple installation and operation via the control panel
• 99 fingers can be stored • 4 relay outputs • Simple installation and operation via the control panel • 3 time zones (always, time zone A and time zone B) • Access log
The IP-based biometric access control system for facilities of any size.
• Holiday program automatically blocks users assigned to time zone A or B for a defined time period. • Full access program overrides any time restriction (every user is granted 24/7 access) for a defined time period. • Entering user names • Deactivate or delete users one by one • Fingerprints are assigned to relay outputs via virtual „keys“ defined in the master key plan • Automatic distribution of finger templates to all finger scanners
2
GATE
• Up to 2.000 fingers per scanner • 1 to 4 relay outputs, extendable • Unlimited amount of scanners • Unlimited amount of users • Configurable time zones • Access log
and much more t to u wan bout o y o D ea t mor ss u o d fin untle the co ties of ili possib net? ekey tact us con Please urther for f s! detail
ekey home
ekey multi
Planning Steps for competent advice
1 2 3
Select a suitable system according to project size and customer´s needs: a) ekey home b) ekey multi c) ekey net
Select the most suitable finger scanner based on its design and its mounting method: a) wall-mounted (with or without accessories) b) integra including wall-mounting kit for installation into a wall, or without such a kit for integration into door leafs or door frames c) outlet-mounted for integration into gang boxes or entrance panels
TABLE OF CONTENTS Page
Select a suitable control panel on the basis of certain criteria (only applicable for ekey home): a) wall-mounted, or DIN-rail mounted for installation in the electrical cabinet (distribution board) b) desired amount of relay outputs, e.g. to open the front door (relay 1), arm/disarm the intrusion alarm system (relay 2), etc. ATTENTION: Each fingerprint is assigned to a specific relay output (refer to the „Single family home“ sample project on page 4).
4 5
Select a power supply. Please pay attention to the following: a) standard power supply b) convenient DIN-rail mounted power supply for electrical cabinet ATTENTION: When integrating into entrance panels, a suitable power supply is often already available. ATTENTION: Check required voltage and amperage of door strike, motor lock, etc. A suitable power supply is also often supplied along with motor locks.
Regarding door strikes and motor locks, please pay attention to the following: a) A door strike is low cost, but the door is not deadlocked. b) A motor lock deadlocks the door automatically (via spring clips or a motor) and unlocks the door electrically (motorized). Advise your customer to purchase a motor lock along with the new door!
ekey product overview
2
Planning steps
3
ekey home sample project
4
ekey home wiring diagram
5
ekey multi sample project
6
ekey multi wiring diagram
7
Order info
8
Finger scanner wall-mounted
9
Finger scanner integra 2.0 + outlet-mounted
10
Control panels + power supplies
11
Finger scanner complete product sets 12 3
FRONT DOOR
GARAGE DOOR
ekey home
Stand-alone solution Simple, convenient, secure!
• • • •
Up to 99 different fingerprints can be stored User administration carried out directly on the control panel ekey home 1: finger scanner and control panel with 1 relay output ekey home 2/3: finger scanner and control panel with 2 or 3 relay outputs (different fingers control different relay outputs)
GARAGE DOOR
FRONT DOOR
Example: „Single family home“ project The front door and the garage door are to be controlled via finger scanner. The customer´s requirements: • Keyless access for all family members. • Front door and garage door are to be controlled via the finger scanner mounted at the front door. Two different fingers are to be used. The index finger unlocks the front door via relay output 1. The middle finger opens the garage door via relay output 2. • Simple programming via the control panel.
4
The solution from the installer: • Simple installation of the new ekey home FS OM finger scanner and the convenient ekey home CP DRM 2 control panel. • A future system expansion (e.g. need for an intrusion alarm system, opening the garage door, etc.) would be even easier if the larger control panel with two or three relay outputs is installed right from the beginning.
ekey home wiring
Power supplies
Safety isolating transformer, protection class II (SELV)
Termination Switch position BOTTOM = ON
ekey home control panels
Inputs for exit buttons
Cable recommendation J-Y(ST)Y 4 x 2 x 0.8 Wire assignment: 2x RS485 bus; 2x RS485 back-up wires 2x power supply; 2x back-up wires for increased cross section when cable length is above 50m
RS485: serial wiring (in a line) max. 500m
luster terminal ekey cable type A
ekey home finger scanners Termination Switch Position Right = ON
Termination Switch Position TOP = ON
Termination Switch Position Right = ON
5
GARAGE DOOR
FRONT DOOR
INTERNAL DOORS
DOOR
ekey multi
Extended stand-alone solution: up to 4 finger scanners using only 1 control panel Example: „Villa with domestic staff“ project S1
The front door, the garage door and the gate are to be controlled via finger scanner. GATE
The customer´s requirements: • Time restricted access for domestic staff (time zone A) • No site restriction (all users have access everywhere) • Several functions on each finger scanner (individual fingers = different functions)
S1
S2
S3
ALARM
FRONT DOOR
S2 S1
S1
GARAGE DOOR
The solution from the installer: • The family has unrestricted access (time zone „always“) everywhere • Domestic staff is allowed to enter the house Master Key Plan configuration acc. to example: on 2 selected days in the morning (time zone A) Relay 1 Relay 2 Relay 3 Relay 4 • Intrusion alarm is deactivated when Master Key Plan Front Door Gate Garage Door Alarm opening the front door S1 S2 S3 S1 • From the scanner at the front door, both Scanner front door the gate and the garage door can be opened Scanner gate S1 • From the scanner at the garage door, the Scanner garage door S2 S1 gate can be opened as well
6
ekey multi wiring
On the first and the last device in the RS485 bus, the termination switch has to be set to “ON�.
First device in the bus (chain)
Inputs for exit buttons 3,4
Safety isolating transformer, protection class II (SELV)
Termination Switch position BOTTOM = ON
Inputs for exit buttons 1,2
Devices in the middle of the bus.
Termination Switch position LEFT = OFF
Termination Switch position BOTTOM = OFF
Depending on the configuration, 0 to 3 units can be placed here
ekey cable type A
luster terminal
RS485: serial wiring (in a line) max. 500m No star-shaped wiring!
Termination Switch position Termination Switch Position RIGHT = Right ON = ON
Last device in the bus (chain).
Cable recommendation: J-Y(ST)Y 4 x 2 x 0,8 Wire assignment : 2 x RS485 bus; 2 x RS485 back-up for star-shaped wiring (back and forth!) 2 x power supply; 2 x back-up to increase cross-section for cable lengths above 50 m
7
ekey home
ekey multi
Order info
not to forget about anything ekey home Possibility 1: Complete ekey home product sets All components bundled into a package (refer to page 12) possibility 2: ekey home in 4 steps Step 1: Select a finger scanner Step 2: Select accessories for the finger scanner (only if desired) Step 3: Select a control panel Step 4: Select a power supply (might come along with the entrance panel)
ekey multi ekey multi in 4 steps: Step 1: Select a finger scanner (1-4 units) Step 2: Select accessories for the finger scanner(s) (only if desired) Step 3: ekey multi control panel with 4 relay outputs Step 4: DIN-rail mounted power supply (might come along with the entrance panel)
8
101 287 ekey home 1 IN 2.0 E WM set
1
2
Ordering in 4 steps: 1 Finger scanner
3
2 Accessories (optionally)
4
3 Control panel
4 Power supply
... and now it’s time to order!
Compatible with system >
ekey home
1 Finger scanner wall-mounted Part No.
Description
Model
101 405
ekey home FS WM 2.0
silver-metallic
NEW
FAR: 1.0 x 10 -6 FRR: 1.4 x 10 -2
Temperature range: -25° C up to 70° C IP rating: IP44 Recommended installation height: 135 cm! Display: 3 multi-colour LEDs Functions: 99 fingers storable, tamper-proof, data not lost in case of power failure, bus termination configurable on the device
Dimensions (W/H/D): 45 x 81.55 x 60.2 mm Power consumption: approx. 1 W Supply voltage: 8-24 VAC, 8-24 VDC
Compatible with system >
2 Accessories
ekey home
optionally
Weather shield wall-mounted 101 406
NEW
ekey weather shield WM 2.0 ST
Brushed stainless steel
Dimensions W/H/D: 110 x 170 x 95 mm Recommended installation height: 140 cm (upper edge)
Scope of delivery: Weather shield ST, 2 M3x6 mm countersunk screws, 4 3x35 mm countersunk head screws and dowels
Compatible with system >
ekey home
ekey multi
1 Finger scanner outlet-mounted Conceived specifically to be mounted in standardized wall outlets (50 x 50 mm, gang box according to DIN 49073) of the biggest European electrical switch manufacturers.
I = INTEGRATION
OM I
Conceived specifically to be mounted in intercoms, mailboxes, etc.
Part No.
Description
Model
101 148
ekey home FS OM E
for installation into gang boxes, incl. white bezel
101 310
ekey home FS OM I
for installation into entrance panels, etc.
FAR: 1.0 x 10 -6 FRR: 1.4 x 10 -2 Dimensions W/H/D: 50.4 x 50.4 x 30.1 mm Power consumption: approx. 1 W Supply voltage: 8-24 VAC, 8-24 VDC Temperature range: -25° C up to 70° C
IP rating: IP31 up to IP43 (depending on switch frame used); IP64 with ekey accessory 101 372 Recommended installation height: 155/110 cm* Display: 3 multi-colour LEDs Functions: 99 fingers storable, tamper-proof, data not lost in case of power failure, bus termination configurable on the device, adjustable to fit the design of different switch manufacturers
*110 cm when installed horizontally (turned 90°)
OM E
E = ELECTRICAL INSTALLERS
For a compilation of switch frames suitable for outdoor operation, refer to: http://downloads.ekey.net/ekey_FS_UP_IP-Schalterprogramme_en.pdf
2 Accessories
Please see next page >>
9
Compatible with system >
2 Accessories
ekey home
ekey multi
optionally
Bezel for outlet-mounted finger scanner 101 167
ekey bezel OM AL 50 x 50
plastic, aluminum
101 168
ekey bezel OM AN 50 x 50
plastic, anthracite
Dimensions W/H/D: 50.4 x 50.4 x 2.5 mm
Colours: anthracite, white-aluminum
Frame for outdoor use (with the OM I finger scanner) 101 372
NEW IP64
ekey frame OM ST IP64
stainless steel
Dimensions W/H/D: 70 x 70 x 6.6 mm
Functions: to be used in combination with FS OM I (101 310). IP64 on exterior plasters with max. 2 mm masonry graining around the electrical outlet.
Stainless steel gang box for outdoor use 100 304
NEW
ekey in-wall mounting kit OM ST
Brushed stainless steel
Dimensions W/H/D: 88 x 88 x 42 mm
Functions: to be used in combination with the FS OM I (101 310). Due to its inclination, the ekey inwall mounting kit OM ST can be used to install the finger scanner at 135 cm lower edge.
Compatible with system >
ekey home
ekey multi
1 Fingerscanner integra Part No.
Description
Model
101 326
ekey home FS IN E
incl. design element and cable
FAR: 1.0 x 10 -6 FRR: 1.4 x 10 -2 Dimensions W/H/D: Housing 43.6 x 89 x 17.3 mm Power consumption: approx. 1 W Supply voltage: 8-24 VAC, 8-24 VDC
Temperature range: -25째 C up to 70째 C IP rating: IP54 Recommended installation height: 155 cm! Display: 3 multi-colour LEDs Functions: 99 fingers storable, tamper-proof, data not lost in case of power failure, bus termination configurable on device Compatible with system >
2 Accessories
optionally
In-wall mounting kits for finger scanner 101 302
ekey in-wall mounting kit IN ST
stainless steel
101 301
ekey in-wall mounting kit IN ST LED
stainless steel incl. alarm LED
Flush-mounted box W/H/D: Housing 60 x 122 x 36 mm
Faceplate W/H/D: 96 x 142 x 2 mm
ekey in-wall mounting kit IN ST incl. weather shield
stainless steel
Flush-mounted box W/H/D: Housing 60 x 122 x 36 mm
Faceplate W/H/D: 126 x 142 x 65 mm
ekey mounting set IN compact for flush-mounted installation
0,5 mm metal sheet
101 147
101 300
Flush-mounted housing W/H/D: Housing 42 x 87 x 25 mm 101 383
ekey faceplate IN ST for item 101 300 (optional) Dimensions W/H/D: 96 x 142 x 2 mm
10
stainless steel
ekey home
ekey multi
3 Control panels Part No.
Compatible with system >
ekey home
Description
ekey home
Model
ekey home wall-mounted control panel 100 478 100 479
ekey home CP WM 1
1 relay
ekey home CP WM 3
3 relays
Dimensions W/H/D: 180 x 110 x 39.2 mm Power consumption: approx. 1 W Supply voltage: 9-12 VAC/DC Temperature range: -20° C up to 70° C IP rating: IP20 Relays: CP 1: 1 output, dry contact CP 3: 3 outputs, dry contacts
Max. relay input voltage, input current: 250 VAC/5A; 30 VDC/5A Inputs (exit button): Display: LED 2x7 segments Programming: 4 push buttons RS485 termination: not configurable Functions: Enroll users, delete users, change relay opening times (0-99s), adjustable security code, reset
ekey home DIN-rail mounted control panel 101 162 101 312
3 Control panel
ekey home CP DRM 1
1 relay
ekey home CP DRM 2
2 relays
Dimensions W/H/D: 70 (4HP) x 86 x 54 mm Power consumption: approx. 1 W Supply voltage: 8-24 VAC/DC Temperature range: -20° C up to 70° C IP rating: IP20 Relays: CP DRM 1: 1 output, dry contact CP DRM 2: 2 outputs, dry contacts
Max. relay input voltage, input current: 42 VAC/DC; 2A Inputs (exit button): CP DRM 1: 1 contact CP DRM 2: 2 contacts Display: LCD 106 x 56 pixels, 7 lines/21 characters + 2/4 status-LEDs RS485 termination: configurable Functions: Enroll users, delete users, name entries, change relay times (0-99s), adjustable security code, reset, test mode
Compatible with system >
ekey multi
ekey multi
ekey multi control panel DIN-rail mounted 101 163 Available from 09/2011
NEW
ekey multi CP DRM 4
4 relays
Dimensions W/H/D: 70 (4HP) x 86 x 54 mm Power consumption: approx. 1 W Supply voltage: 8-24 VAC/DC Temperature range: -20° C up to 70° C IP rating: IP20 Relays: 4 outputs, dry contacts Max. relay voltage, power input: 42 VAC/DC; 2A
Inputs (exit button): 4 contacts Display: LCD 106 x 56 pixels, 7 lines/ 21 characters + 8 status LEDs RS485 termination: configurable Runtime buffer integrated RTC: 96h Functions: Enroll users, delete users, change relay opening times (0-99s), adjustable security code, reset, test mode, 3 time zones, access log, master key plan, name entries, holiday and full access program
Compatible with system >
ekey home
ekey multi
4 Power supply Power supply 800 060
100 203
100 205
ekey PS ST 230AC/9VAC/0.8A
Power adapter
Dimensions W/H/D: 52 x 64 x 42.5mm Supply voltage: 230 VAC
Output voltage, output current: 9 VAC, 800 mA Cable length: 5 m
ekey PS DRM 230AC/12VAC/1.5A
DIN rail-mounted
Dimensions W/H/D: 3HP, 52.5 x 93 x 68.5 mm Supply voltage: 207-253 VAC
Output voltage, output current: 12 VAC; 1.5 A Temperature range: -20°C up to 50°C IP rating: IP20
ekey PS DRM 230AC/12VDC/2A
DIN rail-mounted
Dimensions W/H/D: 2HP, 35 x 93 x 68.5 mm Supply voltage: 100-240 VAC
Output voltage, output current: 12 VDC; 2 A Temperature range: -10°C up to 50°C IP rating: IP20
11
Europe’s #1 for fingerprint access solutions
Ordering in 1 step:
COMPLETE PRODUCT SETS ekey home complete (WM, IN, OM) Compatible with system >
ekey home
NEU
Part No.
Description
Model
101 407
ekey home set WM 2.0 WM 1
silver-metallic, with WM control panel, 1 relay output
101 408
ekey home set WM 2.0 WM 3
silver-metallic, with WM control panel, 3 relais output
COMPLETE PRODUCT SET consists of: • wall-mounted finger scanner (silver-metallic 101 405)
NEU
101 409
EXPORT/1204
COMPLETE PRODUCT SET Finger scanner wall-mounted
• wall-mounted control panel 1 (100 478), or wall-mounted control panel 3 (100 479) • power supply ekey PS ST 230 AC/9 VAC/0.8 A (800 060)
ekey home set WM 2.0 DRM 1
with DIN-rail mounted control panel, 1 relay output
COMPLETE PRODUCT SET consists of: • wall-mounted finger scanner (silver-metallic 101 405)
• ekey home CP DRM 1 control panel (101 162) • ekey PS DRM 230 AC/12 VAC/1.5 A DIN-rail mounted power supply (100 203)
Compatible with system >
ekey home
COMPLETE PRODUCT SET Finger scanner outlet-mounted NEW
101 165
ekey home set OM E DRM 1
with DIN-rail mounted control panel, 1 relay output
COMPLETE PRODUCT SET consists of: • ekey home FS OM finger scanner • bezel in white colour • mounting bracket for installation in a gang box (50x50 mm)
• spacers for adjusting the height between bezel and switch frame • ekey home CP DRM 1 control panel (101 162) • ekey PS DRM 230 AC/12 VAC/1.5 A DIN-rail mounted power supply (100 203)
Compatible with system >
ekey home
COMPLETE PRODUCT SET Finger scanner integra 101 313
ekey home set IN E DRM 1
with DIN-rail mounted control panel, 1 relay output
101 287
ekey home set IN E WM 1
with wall-mounted control panel, 1 relay output
ekey home set IN E DRM 1: • ekey home FS IN finger scanner integra • stainless steel design element • cable type A 8m • ekey home CP DRM 1 control panel • ekey PS DRM 230 AC/12 VAC/1.5 A DIN rail-mounted power supply
ekey home set IN E WM 1: • ekey home FS IN finger scanner integra • stainless steel design element • cable type A 8m • ekey home CP WM 1 control panel • ekey PS ST 230 AC/9 VAC/0.8 A power supply
Fig.: Part No. 101 313
Your reseller:
Austria & International ekey biometric systems GmbH Lunzerstraße 89, A-4030 Linz Tel: +43 732 890 500 2000 office@ekey.net
Germany ekey biometric systems Deutschland GmbH Liebigstraße 18, D-61130 Nidderau Tel: +49 6187 90696 0 deutschland@ekey.net
Switzerland & Liechtenstein ekey biometric systems Est. Landstrasse 79, FL-9490 Vaduz Tel.: +41 71 560 54 80 schweiz@ekey.net
Eastern Adriatic Region ekey biometric systems d.o.o. Vodovodna cesta 99, SLO-1000 Ljubljana Tel.: +386 1 530 94 89 info@ekey.si
Further ekey products for access control, time & attendance and IT security are available at www.ekey.net 12
Made in Austria