Scarlett Fever – Forrest Kennedy’s ’71 RS/Z28 Camaro

Page 1

As the saying goes, good things come to those who wait. Forrest Kennedy spent many years in school; both he and his wife Krystal agreed they’d live like students until he finished so that they could build an X275 car that they could both enjoy.

Fast forward five years and this 1971 Chevrolet Camaro RS Z28 is practically their child.

Although the car took some time to acquire, it was no stranger to Forrest as he watched his dad race against it growing up back in the NMCA EZ Street days. In fact, the look and feel of the Camaro was so entrenched in

his fond memories of those weekends at the track that he vowed to keep it as close to what he remembered as possible, while modernizing everything else and adding some serious power. “I remember as a child standing at the fence watching the car that I now own race against dad’s butternut yellow 67 SS/RS that he and my mom dated in.

One of the biggest goals in building this car was to make it modern and competitive but keep its looks as close as possible to how I remember it as a child,” Kennedy said.

Aside from his dad’s influence, Forrest’s mom Scarlett loved drag racing too, and she is the reason for the Z28’s name “Scarlett Fever.” “I wish she were

■ A 1971 Z28 RS split bumper Camaro is a rare piece and the Kennedy’s have gone to great lengths to retain as much of that classic Camaro style as possible, while still building the competitive race car they wanted. The car is simply stunning, still having the factory GM steel and glass intact.

here to see what we are doing now,” Forrest lamented. Almost as if choosing this car was destiny for Forrest, although the bright red paint work and super clean body have stayed untouched the last 30 years, the former

owner of the car, Dean Brooks, did the body and paintwork, and ironically the paint code is called “Scarlett Red”.

The car itself is an original all-steel piece aside from the hood, and even the glass remains in place.

■ All the original detail and trim work on the car remains, but as you can see there are some hints of the build that are impossible hide. A 3rd gen Forced Inductions 88mm turbo lurks behind the grille while a Sunoco composite hood hides the LSX mill and a chute hangs off the rear. Oh, and the side exit exhaust is pretty hard to hide, too!

september
■ Was it irony or destiny that the car is named in memory of Forrest’s mom Scarlett, and that the name of the paint color used on the car 30 years ago was “Scarlett Red”.
www.rpmmag.com september Harnessing the Competitive Edge 5/8" WHEEL STUD KITS ½" SOCKET HEAD WHEEL STUD WITH BULLET NOSE “EVERY NUT AND BOLT IN OUR CAR IS TITANIUM.” - ROCKY FLANAGAN Ti64.COM SALES: (737) 215-8999 | EMAIL: SALES@TI64.COM VANESSA FLANAGAN OPEN OUTLAW RACING LUG NUT KITS (5 PC) @BEERSPHOTOGRAPHY2017 FAST DELIVERY! GREAT PRICES! VACUUM PUMP ACCESSORIES MOROSO PERFORMANCE PRODUCTS • 203 453 6571 • WWW.MOROSO.COM NO. 22840 Enhanced Design, 3-Vane Vacuum Pump NO. 64888 Vacuum Pump Pulley, Gilmer Type, 36 Tooth NO. 22630 Vacuum Relief Valve with Easy Adjustable Knob

Brazzel Performance Fabrication installed the original certified cage and a Smith Racecraft front subframe was added. More recently, the ladder bar system was updated by Allan Pittman at AP Race Cars.

Most of the substantial changes were

made in the power department where it was out with the old and in with the new. Since Forrest and Krystal wanted a modern classic, what better way to achieve that than to go with the LSX platform. The new heart of the rare Camaro was created by Scott Sublet of PIG

september

■ The PIG Motorsports-built 440 inch LS started with a Dart LS Next block stuffed with a Callies billet crank and billet aluminum rods with custom forged pistons. LSX DR 11-degree raised runner heads are equipped with Jesel billet steel rocker arms and a GM LSX DR intake is topped with a custom elbow and Holley throttle body. A Forced Inductions 88mm Gen 3 X275 turbo resides front and center.

Motorsports, and when there’s an issue or maintenance required, he gets a call. “Although the car is our child, we refer to this motor as Scott’s child because he is very meticulous about how it runs and how it is maintained,” Kennedy added. No “junkyard” swap here; Forrest wanted nothing but the best for Scarlett, and there’s good reason for that; “In the late 90s we would struggle to be competitive in EZ Street for numerous reasons. I remember my dad telling me when I grew up to position myself to ‘spend until you win’. Although that is not possible and certainly doesn’t guarantee success, it

was a motivator for me to go to school.” That schooling not only kept Forrest out of trouble, but also led him to a career that would enable him to buy the Camaro and make sure that it was built to be competitive.

Rotating inside the Dart LS Next block is a Callies Ultra billet crank, billet aluminum rods and custom coated JE Racing pistons, with the final cubic inches working out to 440. A set of high-flowing LSX DR 11-degree raised runner heads with Jesel billet steel rocker arms cap off the short block and the intake manifold is also a GM LSX DR (Drag Racing) piece.

www.rpmmag.com september
september
www.rpmmag.com september
Onelookinsideandthere’snomistakingthatthisisaCamaro
■ The rear area has been replaced with carbon fiber along with a few carbon panel inserts, the digital dash, shifter and custom covered race seats, but much of the factory interior remains.

■ Placement of the electronics is on a raised panel on the passenger side and provides for easy access. Note the trick glove box fastening that allows even more space to work when removed.

september

Forrest’s end goal is to not only compete in, but be competitive in the X275 class, and that means running a class legal forced induction setup, and he chose turbocharging. A Forced Inductions Gen 3 X275 88mm turbo provides boost and Jason Brazzel completed the associated piping and installation work. Being that the Z28 runs on Methanol, there’s no need for an intercooler setup and Billet Atomizer 850s supply the 440 LSX with Meth. A Holley Dominator system wired

in by Devin Vanderhoof of HCR Innovations controls the mill.

Forrest didn’t skimp out on the rest of the drivetrain or suspension either, choosing only the finest parts for the job. Byron Rabon of Cameron’s Torque Converters set him up with one of their converters and a two speed TH400 transmissions. Power runs through a Currie Enterprises fabricated 9-inch complete with gun drilled 40-spline axles and a 3.90 rear gear suspended by the afore-

www.rpmmag.com september

mentioned AP Racecars updated ladder bar/coilover setup. Another critical element in Forrest’s modernization is what Scarlett rolls on. Polished RC Components Torx reside on all four corners, with the polished finish

complementing the car’s red paint and original trim work. 17-inch front runners were used while 15s fill the rear wheelwells with Mickey Thompson rubber on all four corners. Forrest must run a 28-inch radial for his class and beadlocked

M/T 28x10.5 Pro Bracket Radials to the rears.

Maintaining that goal of “modernized classic,” much of the factory interior remains untouched. Forrest retained the factory dash and door panels as well as the car-

www.rpmmag.com september

PuttingtheZtowork

september

pet, however, carbon fiber now covers the rear area behind the Kirkey race seats. As expected, a Holley digital dash replaces the factory unit, and an M&M shifter sits on top of that bulletproof two-speed TH400. All safety shutoffs and fire suppression system controls are located between the driver and passenger seat, just in case.

As well as No Time “All Steel All Glass” class races, Forrest will also run an occasional outlaw street car event because, after all, it does have legal tags. At this point, he’s been in the 4.50s and the 160mph range in the 1/8th-mile, not bad for a streetcar, but he’s just getting started and looking forward to running in X275 as he becomes more competitive.

Forrest is an admitted newcomer when it comes to having a car of this caliber, but that’s ok with him, he has an excellent family and support sys-

www.rpmmag.com september
Forrest Kennedy’s Split Bumper Z28 Camaro

Forrest and Krystal Kennedy’s 1971 RS/Z28 Camaro small tire drag car

Body & Paint:

Car was painted by the previous owner, Dean Brooks, about 30 years ago. Paint work to front clip after a fender bender at Darlington last year was completed by Mike Taylor in Kinston, NC. Ironically, the paint code for the car is “Scarlett Red”.

Chassis:

1971 RS/Z28 split bumper with Smith Racecraft front subframe. The cage and turbo system for the car were built by Brazzel Performance Fabrication (BPF). Recently, the ladder bar system was updated by Allan Pittman at AP race cars.

Suspension:

Stock style front suspension with Smith Racecraft control arms, rack and pinion, etc. Ladder bar rear suspension. Menscer Shocks, TBM Brakes on all four corners.

Engine:

440 inch LS next block with LSX-DR 11-degree raised runner heads with Jesel billet steel rocker arms. The engine was built and is maintained by Scott Sublet with PIG motorsports. Callies Ultra billet crank and billet aluminum rods. Billet Atomizer 850 injectors along with a GM LSX DR intake.

Power Adder:

Forced Inductions Gen 3 x275 turbo (88mm).

Transmission:

Cameron’s Torque Converter Services 2 speed turbo 400.

Electronics:

The engine is all controlled by a Holley Dominator system that was wired by Devin Vanderhoof with HCR Innovations. MSD coils.

Rear:

Currie Enterprises fabricated 9 inch with gun drilled 40 spline axles and a 3.90 gear ratio.

Wheels/Tires:

RC Components Torx with Mickey Thompson tires all around. Generally run a 28x10.5 Pro Bracket Radial because that tire seems to be more forgiving on marginal surfaces.

Interior:

Kept as much of the factory interior as possible. It has a factory dash, door panels, and carpet. It has two race seats and the area behind the seats is carbon fiber. M&M shifter and all of the engine parameters are monitored via a Holley dash.

ET/MPH: 4.50s at low 160mph so far, more to come!

Wins/Milestones: We got my first ever win recently at Woodstock 2021 in the All Steel All Glass category.

Special Thanks: There are so many people who help me with this car, I am almost afraid to try to name them all. Here is a short rundown:

Krystal Kennedy (my wife)– Krys loves this car and drag racing just as much as me, we are a team in everything we do! How many people can say their wife helps take their race car apart and put it together on a regular basis?

Bruce Kennedy (my dad) – for helping me in any way possible and getting me into the sport of drag racing to start with. I grew up watching dad race. He is at all my races and we race his car together locally!

Devin Vanderhoof – Holley EFI/tuning… Devin is my mentor in drag racing (I lack experience). He tunes the car but in reality he is much more than that. I called Devin about 2 years ago as he was recommended to me by a mutual friend to wire the car. Little did I know he would become one of my very best friends and someone I talk to nearly every day.

Scott Sublet – Scott provides me with more horsepower than I can use and does an inspec-

tion on the car from front to back each time it is loaded to go to a race track. I wouldn’t be racing if it wasn’t for Scott. Whenever the car is apart Scott puts the engine together, puts the car together, starts the car and inspects everything. After he gives it his stamp of approval his favorite line is “the motor is fine, don’t call me unless it kicks the rods out.”

Jason Brazzel – Jason does tons of fabrication and work on this car along with dealing with all my nagging. When he doesn’t do things to suit my timeline I call his wife and tattle.

Allan Pittman – For being one of the best chassis guys in the business and dealing with me and all my random projects.

John Dougthery with LS Nasty – John does a lot for me behind the scenes particularly with getting parts and media exposure, check us out on the LS Nasty youtube page.

Landon Schertzinger – Landon’s Performance Diesel. Landon is a childhood friend who supports this team in many ways…the sponsor who always calls asking if I need money, who does that? I appreciate everything he does.

Byron Rabon – Cameron’s Torque Converter Services for building the best converters in drag racing and being an awesome friend.

Kenny and Heidi Barker – Kenny and Heidi come to every race and even come to my house and work on this car while I’m at work. They never expect anything in return and are a very important part of this team!

Les and Melissa Gray, Josh Holloman, Travis McCormack, Terrell Cherry (polishing), Ron Rhodes, Corey Stamper (Spooled Media).

september
■ From left to right: Krystal Kennedy, Forrest Kennedy, Bruce Kennedy, Heidi Barker, Kenny Parker, Travis McCormack and Bubs Barker.
september

tem willing to help as needed. “I am a prime example of how sitting in a classroom forever does not yield you life skills,” added Kennedy. “When I purchased this car I had no idea how to load it or strap it down on a trailer. Needless to say I have learned a lot in my few

years racing but I have a very long way to go.” With such a positive outlook towards his goals, there’s no doubt that we’ll see Forrest, Krystal and Scarlett Fever in the winner’s circle of an X275 event soon enough. RPM Throughout Eastern Canada

www.rpmmag.com september
Issuu converts static files into: digital portfolios, online yearbooks, online catalogs, digital photo albums and more. Sign up and create your flipbook.