Vortech by PBZ AB

TEXT

VORTECH ENGINEERING, LLC 1650 Pacific Avenue Channel Islands, CA 93033-9901 Telephone: 805.247.0226 Fax: 805.247.0669 Web: www.vortechsuperchargers.com Vortech does not condone misuse of its products including but not limited to illegal speed contests or racing of any sort on public roadways. We encourage safe driving habits and recommend racing only at a sanctioned racing facility. Please be smart, drive safe, stay alive.

2007 Vortech Catalog #008517 $4.95

TEXT INTRODUCTION

TABLE OF CONTENTS TEXT INTRODUCTION

To My Fellow Enthusiasts: The original Vortech V-1 A-Trim supercharger developed in 1990.

As we reflect on yet another year of gratifying success, we at Vortech would like to express our most sincere appreciation for your continued support. At Vortech, we remain dedicated to our mission: to bring you the best-performing, highest quality superchargers and components available, using cutting-edge technology and a sense of enthusiasm that is second to none. Customer satisfaction is our credo, and we intend to maintain that tradition by keeping Vortech users at the leading edge of the performance stage. Each product in this latest edition of the Vortech Performance Catalog is a testament to the innovative talents of our staff, and the strength of our resolve in proving that ‘When Performance Counts, It’s Got To Be Vortech!’

4 The Power of Vortech 8 Inside Vortech Engineering 10 Testing & Development

SUPERCHARGERS 12 13 14 15 16 17 18

V-1 Series V-2 SQ Series V-4 Mondo Series V-5 & V-9 Series V-7 Series V-20 Series Technical Drawings / Glossary

SUPERCHARGING SYSTEMS

James K. Middlebrook, President and CEO

What Separates Vortech From The Others:

Being Number One How do we build our superchargers? Just ask Richard Holdner, racer, engine builder and magazine columnist. He was the recipient of the serial number 001, V-1 A-Trim supercharger. It was installed on his 1988 Ford Mustang LX, then campaigned in several Silver State open road races in which he reached a top speed of 193 mph. While drag racing, the LX easily ran in the 13s with an occasional 12 on street tires and 3.08 gears at 118 mph. The blower was subjected to literally hundreds of dyno pulls, in boost pressures ranging from 6 psi all the way up to 14 psi. It was used to dyno test long and short-runner intake manifolds, camshafts and even throttle bodies. In fact, the blower was used to test just about every conceivable engine part or combination, from mass air meters all the way back to mufflers. Did it ever overheat, lose a bearing or even whimper one complaint? Not on your life! It simply went about its business producing boost and horsepower. “Believe me, old number one has been tested to death, even to the point of abuse. However, like the proverbial pink bunny, it just kept going and going,” said Holdner.

“Vortech is home of the quickest street legal Mustang tuner car we’ve ever tested.”

Best Engineered New Product Vortech has been credited with a number of innovations in the field of centrifugal supercharging. Among these achievements include being the first to utilize a supercharger development test cell designed and operated in accordance with SAE Standard J-1723. We also demonstrated the first successful use of gears in a centrifugal supercharger. In addition, Vortech initiated the use of an air bypass valve in systems, and an air/oil mist system for cooling. Put simply, when it comes to innovation, no other centrifugal supercharger company comes close. Vortech has been awarded six US patents and has received three of the prestigious Specialty Equipment Market Association (SEMA) awards for Best Engineered New Product. No other centrifugal manufacturer has ever received one of these coveted awards. These achievements were nothing short of a flash of brilliance from the culmination of an intensive development process.

Vortech is the only centrifugal supercharger manufacturer to receive not just one, but three SEMA awards for Best Engineered New Product!

Vortech Engineering offers a variety of automotive performance products including complete supercharging systems, fuel system components and charge coolers for domestic and import vehicles plus marine applications. Vortech has also consistently earned praise from the automotive press for its premier centrifugal supercharging systems and performance enhancing parts and accessories. » Standard 3-year supercharger limited warranty

» True OEM quality fit and finish, made to fit under the factory hood

» Most street systems are 50-state emissions legal

» Excellent technical support from factory trained, knowledgeable, and enthusiastic personnel

» OBD-II computer compatibility » Designed for maximum performance at safe boost levels on stock engines » Optional supercharger upgrades available to achieve 25+PSI

» Easy to understand installation instructions » 100% complete, even down to the wire ties, making installation trouble free

See page 20 for information on our new 3 year/36 thousand mile limited powertrain warranty program!

20 22 24 26 28 30 32 34 36 38 40

Features & Comparison Ford Mustang 86-95 Ford Mustang 96-08 Ford Mustang 93-04 Specialty Ford / Lincoln Truck & SUV Chevrolet Corvette/Pontiac GTO Chevrolet Camaro/Pontiac Firebird Chevrolet Carbureted Small Block Chevrolet Carbureted Big Block GM Truck & SUV, Hummer H2 Nissan/Infiniti/Honda/Acura/Lexus

RACING PRODUCTS & ACCESSORIES 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56

Charge Cooling Charge Coolers & Manifolds Bypass/Blow-Off Valves Fuel Systems & Gauges Fuel Management Units Fuel Pumps & Accessories Optimizers, Regulators & Filters Fuel Rails & Injectors Mustang Mounting Assemblies Mustang 5.0L Discharge Tubes Supercharger Pulleys Crank & Power Pulleys Tensioners, Idler Pulleys & Belts Miscellaneous Accessories Merchandise

IMPORTANT INFORMATION

57 Upgrade, Exchange & Rebuilding 58 Limited Warranties Program

VORTECH ENGINEERING, LLC 1650 Pacific Avenue Channel Islands, CA 93033-9901 © COPYRIGHT 2007: This catalog, design, text, graphics, photography, and all products contained within are protected by state common law, copyright, and/or patent laws. All legal rights therein are reserved. The design, layout, dimensions, geometry, and engineering features shown on this catalog and all products contained within are exclusive property of Vortech Engineering, LLC. This product may not be copied or duplicated in whole or part, abstractly or fundamentally, intentionally or fortuitously, nor shall any design, dimension, or other information be incorporated into any product or apparatus without prior written consent of Vortech Engineering, LLC. Electronic copies and hard copy portions of this catalog may be printed for the purpose of placing an order with Vortech Engineering, LLC. However, any other use of materials on this catalog (including reproduction for intentions other than those referred to above, modification, distribution, or republication) without prior written consent of Vortech Engineering is strictly prohibited. TRADEMARKS: COOL RUNNER, ENGINEERED WITH AN ATTITUDE, FORCEPOWER, GEARCHARGER, IGLOO, MAD MAX, MAXFLOW, MAXGRIP, MONDO COOLER, POWER COOLER, RAPTOR, SHOOTOUT, SQ, T-REX, V-1, V-2, V-3, V-4, V-5, V-7, V-9, V-20, V-24, V-27, V-28 VORTECH, VORTRON, VORTECH MARINE are all trademarks of Vortech Engineering, LLC. DISCLAIMER: Vortech Engineering, LLC is unparalleled in engineering excellence in the centrifugal supercharging industry. Due to our extensive product line, there may be instances whereby pricing, product specifications, and availability may change, without notice, that may not be consistent with the copy, illustrations, graphics or photography featured on this catalog.

INTRODUCTION TEXT

TEXT INTRODUCTION

THE POWER of VORTECH We believe the ultimate endorsement is from those in the industry who specify a Vortech supercharger for use in a system they take to market. Whether it’s with a Shelby 427 Cobra or a Mallett Corvette, we’ve been the supercharger of choice for many ever since we built our first unit in 1990.

The 192 MPH 2005 Mustang GT Stock 4.6L 3V, 575 HP, 515 lb. ft., 16PSI...Enough!

Among Those Who Specify Vortech Are: Advanced Motor Sports/AMS (VW), Adventure Innovations (Jeep), Blower Works (Corvette), Centrifugal Air Pumps, Australia (Commodore/Holden), Dinan Engineering (BMW), Extreme Performance, United Arab Emirates (Toyota, Nissan), Focus Sport (Focus), Heffner’s Performance Center (Viper), Keith Craft Racing Engines, Mark Ray (Ford, Mercury), Mosselman Turbo Systems, Holland, (European Mercedes Benz), RIPP Modifications (Chrysler, Dodge, Hyundai, Honda, Jeep, Mitsubishi, Nissan, Toyota), Rocky Mountain Competitive Research (Corvette, Impala SS), Shelby Automobiles (Cobra, Series 1), Shinoda Performance Vehicles (Mustang), The SHO Shop (Contour, Taurus SHO), Steeda (Focus, Mustang), Stillen (Nissan), Unique Performance (Mustang), , VF-Engineering (Audi, BMW, Focus, Porsche, VW), Z-Spec (Chevrolet, Oldsmobile, Pontiac), 928 Motorsports (Porsche), Cigarette Racing (Marine), Livorsi Marine, Moroso Marine, Nordic Power boats, Riva Racing (Kawasaki, Yamaha, and Sea-Doo Watercraft)

Modern Power for Legendary Perfomance

A Vortech prepared 2005 Mustang GT recorded 179 MPH in the Road & Track’s Standing-Mile competition on it’s way to reaching 192 MPH “out the back door” at Lemoore Naval Air Station, Lemoore, California. “Don’t tell the Road & Track people, but on the last run, I kept the hammer down past the #7 marker to find out if the Vortech Mustang would pull to the rev limiter in 5th gear. The silence (from the engine shutting off ) as we hit the limiter at 6600 rpm was music to my ears. Imagine, 192 mph with nothing more than a stock 4.6L 3V motor and a Vortech supercharger. H.G. Wells would have been proud.” -Richard Holdner, driver

You’ve Never Seen A Deuce Like This Before

From the Series 1 to the 427FE blow-through system (upper left) producing in excess of 750 street-stomping horsepower, Vortech proudly continues to be an elite supercharger supplier to the legend, Carroll Shelby.

10-Seconds on 6-Cylinders

See more of PHP’s “Lil’ 6” at www.vortechsuperchargerstv.com

Renowned Ford tuner, Paul Svinicki, owner of Paul’s High Performance in Jackson, Michigan, regularly uses the Power of Vortech to get the most from his special project and development vehicles. His latest mule, the little red Mustang known as “Lil’ 6” is no exception. Using a PHP-enhanced version of the Vortech SQ Si-Trim Supercharger System for 2005-07 V6 Ford Mustangs, Driver Scott Baumgartner piloted Lil’ 6 to a string of 10.80 1/4-mile passes throughout the 2007 racing season using the production 4.0-liter longblock. As stated by Svnicki, “our Vortech-powered V6 Mustang plain kicks butt! We’ve logged over 250 passes and killed a lot of parts, but the Vortech just keeps performing awesome!” Not bad for the one of the world’s only 50-state legal centrifugal systems for the ‘Ultra Low Emissions’ V6 Mustang.

Jay Losi’s ‘32 Ford Roadster redefines excitement with timeless style and new age power.

85% Ethanol 100% Vortech In the increasingly ‘green aware’ world of hot rodding, performance guru’s like Scott Bartling, owner of Bar tling Motorspor ts, are carving a new path to eco-friendly horsepower using cutting-edge Vortech components. Equipped with an ‘off the shelf’ Vortech V-2 SQ SC-Trim Supecharger System with optional charge cooler, this Bartling Motorsports-tuned 2006 Chevy Silverado makes 449 ponies at the rear wheels and swallows the quarter mile in just 13.1 seconds. All that with just 5.3 liters of displacement and a little bit of corn mash!

Benefiting from a long list of the latest in high-tech hot rod upgrades, Jay Losi’s ‘32 Ford Roadster is a perfect example of why the ‘Deuce’ has long been hailed as one of America’s favorite boulevard bruisers. Outfitted with a 481-cubic-inch Donovan powerplant sporting twin Vortech superchargers, this all-steel king of the street roams the California coast with malicious intent. With one quick stab of the throttle 1,100-angry ponies quickly spring into action, leaving passengers desperately looking for something to hold on to!

INTRODUCTION TEXT

TEXT INTRODUCTION

Pounding the Pavement with a Mallet

Waterbound Missiles Courtesy of Riva

While competing in the 4th Annual Car and Driver Supercar Challenge, Chuck Mallett of Mallett Cars, Ltd. piloted his Cadillac CTS-V to a first place finish in the Sedan Class competition at Michigan International Speedway using a Vortech Supercharger. His Caddy sported a 7.1 liter V8 with Corvette LS6 heads plus other internals from GM Motorsports. Power was in the 750 horsepower range, thanks to the efficiency of the Vortech JT-Trim compressor. With GM engineer Jim Minneker at the wheel, the CTS-V also added an impressive first-in-class in the coveted 100-150 MPH sprint at 9.9 seconds... a full two seconds faster than any of the competition. As Car and Driver put it so well, “punch the throttle, and you’re pasted into the driver’s seat like cake batter, the car leaps forward like some primordial beast.” Thumbs up to everyone at Mallett Cars for a mission well accomplished.

Credited with developing the industry’s first bolt-on supercharger system for personal watercraft, Riva Racing of Pompano Beach, Florida is heavily regarded as one of the world’s foremost watercraft supercharging experts. And when this performance juggernaut of the open waves looks to create some major wake via some major boost, they rely exclusively on the Power of Vortech to enhance their supercharged efforts. Now with everything from complete multi-stage systems and upgrades to individual cutting-edge retrofit components, Riva can take nearly any major brand of personal watercraft and force-feed it into generating upwards of 300-horsepower! Sporting a nautical performance arsenal of bolt-on and custom supercharger parts and accessories, Riva proves that when great ideas team up with great technology, the possibilities are as endless as the ocean is deep!

The ultimate touring sedan, the Mallet CTS-V. Built by Mallet. Boosted by Vortech. How does 750-horspower and room for 4 sound to you?

The Choice of Cigarette For more than three decades, the Cigarette Racing Team has set the standard for speed and luxury in the powerboat marketplace. Vortech Marine is the exclusive centrifugal supercharger supplier on their limited edition world class powerboats.

Rtech Is Better Than Yours Redefining the world of nautical supercharging, Rtech Performance builds supercharging systems for high performance marine applications by coupling Vortech compressors with their own innovative intake, intercooler, and blower drive assemblies. According to system designer Tom Robinson, “The high efficiency of Vortech blowers, along with the availability of many different compressor trims and maps, makes my job considerably easier”. Rtech’s twin-blower ‘Big Gun’ system (left) is an outrageous but logical response to the special requirements of marine racing engines, wherein unlike drag racing, they require large displacement and moderate boost pressure to enjoy unparalleled endurance. Using twin counter-rotating Vortech V-2 T-Trim compressors on 600-cubes of big-block Chevrolet, the Big Gun delivers 1600 hp at 20 psi; with far more available when built in a V-7 Ysi-Trim system configuration.

The Stuff Maritime Legends Are Made Of Recognized worldwide for creating some of the baddest engines ever to hit the open seas, Keith Eickert’s Kustom Engines are often considered the epitome of hull-bound, high-tech horsepower. With combinations achieving nearly 2,000ponies in full-blown Poker Run-style race trim, Kustom Engines is not only capable of providing the most demanding customers with all the power they’ll ever need, but also is able to package it in fashion worthy of an art gallery. In the case of this masterpiece shown at right, Kustom Engines utilized a Vortech V-24 XX-trim supercharger along with their own custom intake, upper plenum and progressive linkage throttle body to generate over 1,300-horsepower at 6,100 rpm from just 598-cubes. Still the best part is, they did it with everyday 93-octane pump swill.

102 MPH On A Rope The ski-race version of Nordic’s 21’ Blaze is designed to go fast and provide stellar handling. But what happens when you add a Vortech supercharger to the Mercury Racing HP500 EFI? How about the fastest speed for a 21’ boat at Powerboat Magazine’s 100 mph competition! The Blaze was clocked at 102+ mph in full ski-race mode. This boat also set the Formula Class record at the 62-mile 2004 Catalina Island Ski Race, the old record had been standing since 1987! In fact, the Nordic has competed in over 25 marathon races at speeds averaging 90 mph (most over an hour in length) without an engine or supercharger failure to date.

Macc-ing The Competition When Macc Racing’s Chris MacClugage crossed the finish line first three consecutive times riding Pro Runabout at Lake Havasu, he not only won the world title for that class for the second time in a row, but a second Vortech-blown world title for Kawasaki as well! With an estimated 400-horses on tap and sub-3-second 0-60 mph timeslips, the Macc Racing Kawasaki STX-15F is one of the most wicked PWC’s ever to hit the water. A true testament to hard work, hard riding, and of course, the Power of Vortech!

INTRODUCTION TEXT

TEXT INTRODUCTION

VORTECH ENGINEERING AT THE FOREFRONT THE VORTECH QUALITY STATEMENT

Vortech Engineering, LLC is committed to quality. We are dedicated to continuous improvement throughout the entire organization. We strive to analyze and remedy problems in manufacturing, service and product performance by monitoring key processes and making appropriate changes as necessary. We achieve these quality objectives by implementing a documented quality assurance program that is consistent with the disciplines of ISO 9001:2000

Vortech’s 60,000 square-foot headquarters in Channel Islands, California houses administration, engineering, testing, quality control, manufacturing, sales and marketing. The four major business units are Engineered Material Services, Automotive, Marine and Industrial divisions.

The supercharger has proven to be one of the most effective means for obtaining increased power from an internal combustion engine without having to make major engine modifications. This is accomplished by compressing combustion air before it enters the cylinders, which increases density. This results in improved cylinder filling, allowing more air and fuel to be burned in the combustion cycle, with dramatic increases in torque and horsepower. Vortech superchargers

operate on fundamental and proven turbomachinery principles, first described by Euler’s turbomachinery equation developed in the 18th Century. This principle states that the work imparted to a fluid by an impeller is related to the change in angular momentum of the fluid. From these humble beginnings, the centrifugal compressor has evolved and found its way to becoming the most efficient and reliable means for delivering charge air at high pressures. Vortech has seized upon these known performance advantages and has developed its line of centrifugal superchargers to a performance level that clearly establishes Vortech as the performance and technology leader in aftermarket supercharging.

The engineering staff at Vortech has a combined experience of more than 60 years in turbomachinery product development. Design and manufacturing software include Virtual Gibbs, CadCam, Vellum Solids, Solid Works 2007 and a suite of sophisticated a e ro d ynamic turb omachine r y -sp ecif ic tools for accomplishing advanced modeling and analysis.

Vortech’s 22,000 square-foot warehouse area supports the continuous shipping and handling of all components.

Vortech is much more than just fun on the open roads & high seas. FMC Technologies, Inc. Airport Systems needed a quick and cost prudent aircraft deicing procedure. Vortron Industrial, a division of Vortech Engineering, developed a highly efficient compressor allowing FMC to offer their AirFirst® System on their articulated boom deicing vehicles. This unit effectively blows snow and frost off aircraft surfaces while drastically reducing use of expensive and hazardous glycol.

OF THE FUTURE ADVANCED COMPRESSOR STAGE Here’s where the rubber meets the road. Vortech’s compressor stages are highly evolved, thoroughly tested designs, resulting from more than 17 years of experience and thousands of production supercharger units. A simple visual examination clearly shows the difference. All Vortech compressors incorporate sophisticated impeller designs, coupled to a vaneless diffuser, with a progressive scroll, or volute exit stage. Impellers employ advanced aerodynamic features such as optimized inducer blading, splitters, and in some cases, exit rake and backsweep; all depending on the particular pressure/flow objectives. Rather than a simple change of blower speed to effect different “models”, each Vortech supercharger is optimized aerodynamically so that the best performance is attained for a specif ic vehicle application. In order to effectively take advantage of impeller work, flow must be efficiently dif fused so that pressure rise can b e g e n e r ate d w i th minim al l oss es . Unfortunately, a simple “cut-and-paste” won’t work. Instead, the diffuser is optimally matched to the impeller flow physics, with many iterations tested and verified until maximum efficiency is achieved with each supercharger design. Finally, a matched volute effectively collects and diffuses further, resulting in additional pressure rise. The result? Isentropic efficiencies as high as 80%! In fact, all Vortech compressors achieve at least 72% peak efficiency, with better than 65% efficiency achieved over a majority of the design flow range (surge to choke).

Vortech superchargers are engineered, designed, manufactured, assembled, tested, and packaged in the United States of America!

COMPONENTRY

Vortech componentry has garnered a reputation for its “best in class” execution. Blower casing components are cast from A356 aircraft-spec aluminum alloy treated to T-6 condition. Modern CNC production cells ensure that part tolerances are held into the “tenths”– to, and in many cases beyond, aircraft tolerances.

IMPELLER

The heart of any centrifugal supercharger is the impeller. Our piece is investment cast from an extremely strong but light-weight proprietary aluminum alloy (similar to that used in turbochargers). This special heat treated material is used because of its stability and enhanced properties at the high operating temperatures, which may reach 400°F under extreme conditions. At this temperature, the Vortech impeller is up to 36% stronger than even 7075, a common structural aluminum material used by others. The investment cast process secures close dimensional tolerance and excellent surface finish. Of course, 100% CNC machining ensures exact tolerances. And finally, multi-plane dynamic balancing to better than ISO G0.4 tolerances delivers smooth operation. The historical use of these same procedures in building aircraft turbomachinery components for the most demanding applications, proves its durability.

DRIVE GEARS

Drive gears are manufactured from 8620 and 9310 carburized billet alloy steels. These premium grade materials possess exceptional strength and durability, with enhanced core toughness properties. The gear teeth are CNC precision ground. The internal step-up drive systems are engineered to reliably support impeller speeds exceeding 70,000 rpm.

BEARINGS

Vortech bearings are ultra-high precision (ABEC 7/ABEC 9) pieces; most of which are custom manufactured to our exacting specifications. Aircraft quality is truly an understatement here, since these bearings experience speeds as much as twice that of a jet engine.

LUBRICATION SYSTEM

Vortech’s standard maintenance-free lubrication system uses engine oil that is pre-filtered and injected directly into the supercharger case. Use of engine oil provides faster warmup, excellent reliability and superior cooling. The lubricating oil benefits from continuous filtration, being routinely changed along with the host engine oil (instead of an additional maintenance action).

101

INTRODUCTION TEXT

TEXT INTRODUCTION

TESTING & DEVELOPMENT WHAT MAKES A GOOD SUPERCHARGER?

An excellent question, to which there are many important considerations. Design points such as flow and pressure must be established. Acceptable range, impeller speeds, package size and weight; these are all fundamental parameters that affect the design outcome. Then, there’s the challenge of meeting the proper performance mix at the best attainable efficiency, as there are intrinsic limitations regarding the efficient operational range of a compressor. The latter, in fact, is where the turbomachinery designer spends the bulk of his developmental effort. Some poorly designed units never work within acceptable efficiency limits. In order to quantify compressor performance and efficiency, comprehensive test work must be part of the development process, and is mandatory if a good design is to be executed. Testing must also be highly disciplined, which brings up the subject of test standards.

WHY A TEST STANDARD? Vortech’s testing protocol is amongst the most stringent and thorough in the industry with specialized equipment for system and compressor output testing.

The most fundamental reason behind adopting and adhering closely to a test standard is so supercharger products can be evaluated against a common set of criteria so that the results may be compared directly. Further, if an adopted standard is used at one test facility, then the same results will be obtained at a different facility, when using the same standard while testing the same product. This means that replicated tests produce results that are repeatable, when adhering to the standard. Lastly, the consumer benefits when he has available performance data on competing products, obtained through tests conducted in accordance with a standard. This way, he knows for certain that he can, without bias, compare product performance across all manufacturers that use the same standard and publish the data. We are the only aftermarket manufacturer to develop and use a supercharger test cell (top left) that allows us to legitimately quantify the performance and efficiency of a compressor. This gas compressor test cell features a 250 HP DC electromotive drive with integral transmission to provide speeds up to 21,000 rpm. Combined with a compressor internal drive step-up, impeller speeds up to 88,000 rpm are attainable. Data acquisition and computerized data reduction routines assure that all compressor performance maps are developed and corrected in accordance with SAE Standard J-1723. Issued in August 1995, J-1723 has been submitted for recognition as an American National Standard, per the American National Standards Institute.

(Above & Below) Vortech’s engine testing facility houses a DTS-4000G 2000 HP engine dynamometer, Mustang Eddy Current chassis dyno and Dynojet 224xLC 4WD chassis dynamometer.

A compressor map (below) is the product of a completed J-1723 test. With a map, performance trade-offs can be studied in fine detail during the development process. Multivariate data are displayed and include the pressure versus flow curves, each obtained at a fixed operating speed, and the all-important iso-efficiency contours, which are often referred to as efficiency “islands”. The term “map” is quite appropriate as, usually, the useful operating range of the compressor is displayed in its entirety, and full knowledge of compressor performance can be obtained at any specific operating point. With a compressor map, one can also over-plot an engine air demand curve and determine whether the compressor is suitably matched to the engine. This, by the way, is how Vortech is able to determine and specify the best possible supercharger for any given application.

211

HOW IS A MAP INTERPRETED?

Operating beyond the left side of the compressor map (surge line) results in instabilities and excess heat. The region at the far right side of the compressor map (choke) requires excessive drive horsepower. Both situations result in poor reliability and lackluster performance. The precise optimization and matching of specific superchargers means our units operate within the highest efficiency range on a compressor map for the specific application. Compressor maps are available upon request.

EFFICIENCY & SAFE BOOST

Efficiency is the most elusive goal of the supercharger designer and is perhaps the most important performance parameter of all. Low compressor efficiency means two things: increased discharge temperatures at increased drive horsepower. Higher temperatures result in a charge density penalty, with loss of power. Increased drive power is a parasitic loss that comes right off the bottom line. Note that claims regarding “cool boost,” involving everlarger heat exchanger systems may address the temperature aspect. But, there will always be pressure losses associated with the cooler (meaning another density and power loss) and perhaps more importantly, coolers can never address the drive power parasitic loss. Only efficiency can address these two important performance concerns simultaneously. As a performance standard, Vortech does not offer a compressor that fails to achieve at least 70% isentropic efficiency. As it is an indisputable fact that the most efficient supercharger will afford the consumer the greatest net-power gain on his engine, the savvy customer would be well-advised to request efficiency test data or better, a certified J-1723 compressor map before making a purchase choice. Only Vortech invests this level of development in its products, while also maintaining a margin of safety that anticipates variances in both vehicle and operating conditions a customer may encounter. Our engineers carefully match the compressor, boost level, ignition curve and fuel delivery characteristics of the system to each vehicle application. This OE-type approach to system development is centered on our philosophy of Safe Boost design, that is much like the process major automakers perform prior to the release of a new model or powerplant. Beware of other manufacturers’ unrealistic high power/boost claims achieved through modifications that are inappropriate for your engine. With Vortech superchargers producing more horsepower at a lower boost (compressor efficiency), you’ll find our performance generally exceeds competitor’s “on-the-edge” systems, even with this conservative approach.

ACCU-MATCH COMPRESSOR MATCHING SERVICE Each supercharger is designed, tested, and optimized to provide a specific range of boost and flow, at the best attainable efficiency. Our ACCU-MATCH Compressor Matching Service is for those tuners with highly specialized applications, such as racing. We precisely match the supercharger to the specific flow demands and power requirements of the engine. To take advantage of this service, contact a Vortech technical support representative. Vortech is one of the world’s only supercharger companies to offer a compressor matching service in-house.

Our quality assurance and final inspection department utilizes manual and computer controlled methods such as with the robotic Zeiss Eclipse 2840 Coordinate Measuring machine.

Most components from compressor bypass/blowoff valves to supercharger cases are built by hand in our precision assembly area.

Two Heins systems are used for dynamic impeller balancing to ensure the correct specifications at actual operating speeds.

Vortech’s manufacturing facility includes state-of-the-art equipment; three Makino A77 Horizontal Machining Centers (of which two are integrated with the 20 pallet FMS system), one Hitachi Seiki CS25 vertical CNC turning cell with live tooling, c-axis & loading robot and several other auto-loading machines.

121

TEXT VORTECH SUPERCHARGERS

VORTECH SUPERCHARGERS TEXT

V-1 SUPERCHARGER

V-2 SQ SUPERCHARGER

PERFORMANCE AT ABSOLUTE SPEED

S-Trim

Impeller Speed (Max.)

50,000 53,000

SC-Trim Si-Trim

T-Trim

S-Trim

Impeller Speed (Max.) 50,000

53,000

55,000 65,000

1,000

1,150

680

775

750

75%

78%

76%

Flow CFM (Max.)

1,000

1,150

1,200

Flow CFM (Max.)

680

800

825

Horsepower (Approx.) 680

75%

78%

73%

Isentropic Efficiency

72%

SC-Trim Si-Trim E-Trim

55,000 55,000

PSIG (Max.)

Isentropic Efficiency

Pressure/flow performance data gathered in accordance with SAE Standard J-1723. Superchargers fitted with curved outlets are 1 to 2% less efficient than shown. Horsepower estimates are based on airflow availability.

Please note: All part numbers are universal units without pulleys

PERFORMANCE AT ABSOLUTE SPEED

PSIG (Max.)

Horsepower (Approx.) 680

Utilizing precision ground gears to drive its impeller, the V-1 incorporates the strength of superior design with the quality and testing that make Vortech famous. As a result of our precise drive system, the impeller requires minimum clearance which contributes to Vortech’s superior efficiency and durability. The heavy duty (H/D) configuration includes high-speed, ceramic hybrid ball bearings, ideal for race applications, i.e. cog pulley/Gilmer drive. From the popular S-Trim to the aggressive, race ready T-Trim and the latest Si-Trim, the V-1 is a versatile supercharger for the most demanding enthusiast. (Optional polished finish unit shown at left).

72%

The V-2 SQ model is considered the new generation among superchargers. Highly advanced computer designed gears feature an optimized helical profile which allows for near silent operation while providing superior performance. All V-2 SQ units feature a 3.6:1 internal step-up ratio and are direct bolt-on replacements for our V-1 units.

Please note: All part numbers are universal units without pulleys

V-1 S-TRIM SUPERCHARGER

V-1 SC-TRIM SUPERCHARGER

V-2 SQ S-TRIM SUPERCHARGER

V-2 SQ SC-TRIM SUPERCHARGER

» Strong low-speed boost along with exceptional

» Delivers efficient airflow up to 680 horsepower » Upgradable to S-Trim or T-Trim » Can be used with “Cog” style supercharger drive systems » Available in counterclockwise rotation (CCW)

» Strong low-speed boost along with exceptional

» Impeller speed potential and adiabatic efficiency

» Included in most Vortech supercharging systems » Low-friction impeller seal allows for “upstream”

SATIN FINISH

POLISHED

DESCRIPTION

DISCHARGE

CONFIGURATION

2A128-300 2A128-310 2A129-070

2A128-308 2A128-318 2A129-078

V-1 SC-Trim V-1 SC-Trim V-1 SC-Trim

Curved Straight Straight

H/D H/D H/D, CCW

» Available in counterclockwise rotation (CCW)

» Physical dimensions equal to S-Trim » Delivers efficient airflow up to 680 horsepower » Low-friction impeller seal allows for “upstream”

mid/high-end flow for the street and strip

» Upgradable to T-Trim » Can be used with “Cog” style supercharger drive systems » Available in counterclockwise rotation (CCW) SATIN FINISH

POLISHED

DESCRIPTION

DISCHARGE

CONFIGURATION

2A128-190 2A128-200 2A129-040

2A128-198 2A128-208 2A129-048

V-1 S-Trim V-1 S-Trim V-1 S-Trim

Curved Straight Straight

H/D H/D H/D, CCW

V-1 Si-TRIM SUPERCHARGER

V-1 T-TRIM SUPERCHARGER

» Extraordinary 78% peak efficiency » Direct “bolt-in” replacement for S-Trim » Ideal for latest generation of improved breathing,

» For modified engines used primarily in racing applications » Delivers efficient airflow up to 825 horsepower » Low-speed boost and throttle response equal to the S-Trim » Designed for “Cog” style supercharger drive systems » Requires use of Maxflow Racing Bypass Valve » Available in counterclockwise rotation (CCW)

high-power street and strip engines

» Vastly improved flow and efficiency at high boost levels, providing completely new levels of power gain

» Can be used with “Cog” style supercharger drive systems » Available in counterclockwise rotation (CCW) SATIN FINISH

POLISHED

DESCRIPTION

DISCHARGE

CONFIGURATION

2A178-040 2A178-030 2A179-020

2A178-048 2A178-038 2A179-028

V-1 Si-Trim V-1 Si-Trim V-1 Si-Trim

Curved Straight Straight

H/D H/D H/D, CCW

213

SATIN FINISH

POLISHED

DESCRIPTION

DISCHARGE

CONFIGURATION

2A138-140 2A138-150 2A139-030

2A138-148 2A138-158 2A139-038

V-1 T-Trim V-1 T-Trim V-1 T-Trim

Curved Straight Straight

H/D H/D H/D, CCW

mid to high-end flow for the street and strip

slightly higher than S-Trim

throttle draw-through applications

SATIN FINISH

POLISHED

DESCRIPTION

DISCHARGE

CONFIGURATION

2E128-040 2E128-050 2E129-040

2E128-048 2E128-058 2E129-048

V-2 S-Trim V-2 S-Trim V-2 S-Trim

Curved Straight Straight

SQ SQ SQ, CCW

» Available in counterclockwise rotation (CCW) SATIN FINISH

POLISHED

DESCRIPTION

DISCHARGE

CONFIGURATION

2E128-300 2E128-320 2E129-050

N/A N/A 2E129-058

V-2 SC-Trim V-2 SC-Trim V-2 SC-Trim

Straight Curved Straight

SQ SQ SQ, CCW

V-2 SQ Si-TRIM SUPERCHARGER

V-2 SQ E-TRIM SUPERCHARGER

» Extraordinary 78% peak efficiency » Ideal for latest generation of improved breathing,

» Ultra high impeller speed and efficiency » Low-friction impeller seal allows for “upstream”

» Vastly improved flow and efficiency at high boost levels,

» Physical dimensions equal to S-Trim » Available in counterclockwise rotation (CCW)

high-power street and strip engines

providing completely new levels of power gain

» Available in counterclockwise rotation (CCW) SATIN FINISH

POLISHED

DESCRIPTION

DISCHARGE

CONFIGURATION

2E178-020 2E178-010 2E179-010

2E178-028 2E178-018 2E179-018

V-2 Si-Trim V-2 Si-Trim V-2 Si-Trim

Curved Straight Straight

SQ SQ SQ, CCW

throttle draw-through applications

SATIN FINISH

POLISHED

DESCRIPTION

DISCHARGE

CONFIGURATION

2E129-130

2E129-138

V-2 E-Trim

Straight

SQ, CCW

141

TEXT VORTECH SUPERCHARGERS

VORTECH SUPERCHARGERS TEXT

V-4 SUPERCHARGER PERFORMANCE AT ABSOLUTE SPEED

J-Trim

V-5 & V-9 SUPERCHARGER X-Trim

XX-Trim Z-Trim

Impeller Speed (Max.) 58,000 58,000 64,000 60,000 PSIG (Max.)

Flow CFM (Max.)

1,600

1,700

1,850

Horsepower (Approx.)

1,100

1,300

1,400

79%

78%

Isentropic Efficiency 74%

PERFORMANCE AT ABSOLUTE SPEED

V-5 F-Trim

V-5 G-Trim

V-9 F-Trim

V-9 G-Trim

Impeller Speed (Max.) 52,000 52,000 52,000 52,000 PSIG (Max.)

2,000

13.5

Flow CFM (Max.)

1,400

700

750

825

925

Horsepower (Approx.)

77%

500

550

600

Isentropic Efficiency 76%

73%

72%

74%

The V-4 offers ultra high performance and is designed with the serious racer in mind. When operating at 12 PSIG, this model is nearly twice as efficient as a Roots-type supercharger. The V-4 is capable of producing CFM flow levels in the 2,000 range, up to 32 PSIG of boost and horsepower potential up to 1,400. All units feature our exclusive D-port volute for improved efficiency and utilize extra wide, heavy duty design gears. The heavy duty (H/D) configuration includes high-speed, ceramic hybrid ball bearings, ideal for race applications, i.e. cog pulley/Gilmer drive. Please note: All part numbers are universal units without pulleys

V-4 MONDO J-TRIM SUPERCHARGER

V-4 MONDO X-TRIM SUPERCHARGER

» For larger displacement racing engines

» For vehicles with highly modified engines

» Excellent low-speed boost as well as superior high-rpm flow » Delivers efficient airflow supporting

» Among the highest insentropic efficiency of all Vortech units » Efficient power range in excess of 1300 horsepower » Low-friction impeller seal allows for

used in marine and automotive applications

Designed for use on 1.6 to 4 liter engines, the V-5 features a low-surge threshold for smaller displacement, high-revving engines. As with all other Vortech superchargers, development and testing took place in a state-of-the-art test cell (compliant to SAE Standard J-1723). This efficient compressor design requires less horsepower to drive the impeller and provides cooler discharge temperatures. These features, matched with our exclusive D-port volute, allow for more available boost throughout the operating range, especially at higher engine speeds. The V-9 Series is ideal for applications where space around the engine is a consideration, as with GM F-Body and Sport Compact vehicles. Designed for engines ranging in size from 1.2L to 6.0L, the V-9 features our Air Assist/Power Drain lubrication system, exclusive D-port volute for improved efficiency and a V-band volute clamp for easy under-hood packaging.

Please note: All part numbers are universal units without pulleys

and extreme CFM/boost demands

in excess of 1100 horsepower

» Low-friction impeller seal allows for

“upstream” throttle draw-through applications

» Air Assist (A/A) lubricating system available » Can be used with “Cog” style supercharger drive systems SATIN FINISH

POLISHED

DESCRIPTION

DISCHARGE

CONFIGURATION

2B128-020 2B128-070

2B128-028 2B128-078

V-4 J-Trim V-4 J-Trim

Straight Straight

H/D H/D, Marine, A/A

» Upgradable to XX-Trim unit » Designed for “Cog” style supercharger drive systems SATIN FINISH

POLISHED

DESCRIPTION

DISCHARGE

CONFIGURATION

2B128-010

2B128-018

V-4 X-Trim

Straight

H/D

V-4 MONDO XX-TRIM SUPERCHARGER

V-4 MONDO Z-TRIM SUPERCHARGER

» For high-output racing applications » Boost support to 29 PSIG with a 1400+ horsepower range » Low-friction impeller seal allows for

» For high-output racing applications » Low-friction impeller seal allows for

“upstream” throttle draw-through applications

» Designed for “Cog” style supercharger drive systems SATIN FINISH

POLISHED

DESCRIPTION

DISCHARGE

CONFIGURATION

2B128-030

2B128-038

V-4 XX-Trim

Straight

H/D

215

V-5 F-TRIM SUPERCHARGER

V-5 G-TRIM SUPERCHARGER

» Same properties as G-Trim except

» Available in SQ or Heavy Duty (H/D) configurations » Highest boost (15 PSIG) and

lower maximum flow CFM

» For small displacement engines with

flow (750 CFM) potential in V-5 Series

lower flow input characteristics

» H/D models can be used with “Cog” style

» Better surge line for greater efficiency

supercharger drive systems

at high-pressure ratios and low-airflow

» Available in counterclockwise rotation (CCW)

» Available in counterclockwise rotation (CCW) SATIN FINISH

POLISHED

DESCRIPTION

DISCHARGE

CONFIGURATION

2A148-050 2A149-050

2A148-058 2A149-058

V-5 F-Trim V-5 F-Trim

Straight Straight

Standard CCW

V-9 F-TRIM SUPERCHARGER

“upstream” throttle draw-through applications

» Designed for “Cog” style supercharger drive systems SATIN FINISH

POLISHED

DESCRIPTION

DISCHARGE

CONFIGURATION

2B128-060

2B128-068

V-4 Z-Trim

Straight

H/D

» Available in the SQ configuration for near silent operation » Low-friction impeller seal allows for “upstream” throttle or draw-through applications

» Air Assist (A/A) lubrication system » Available in counterclockwise rotation (CCW) SATIN FINISH

POLISHED

DESCRIPTION

DISCHARGE

CONFIGURATION

2D118-010 2D119-010

2D118-018 2D119-018

V-9 F-Trim V-9 F-Trim

Straight Straight

A/A SQ, CCW, A/A

SATIN FINISH

POLISHED

DESCRIPTION

DISCHARGE

CONFIGURATION

2E148-060 2A148-100 2E149-060

2E148-068 2A148-108 2E149-068

V-5 G-Trim V-5 G-Trim V-5 G-Trim

Straight Straight Straight

Standard H/D CCW

V-9 G-TRIM SUPERCHARGER

» Available in the SQ configuration » Low-friction impeller seal allows for

“upstream” throttle or draw-through applications

» Larger air inlet opening diameter verses the F-Trim model » Air Assist (A/A) lubrication system » Available in counterclockwise rotation (CCW) SATIN FINISH

2D118-020 2D119-020

POLISHED

2D118-028 2D119-028

DESCRIPTION

V-9 G-Trim V-9 G-Trim

DISCHARGE

Straight Straight

CONFIGURATION

SQ, A/A CCW, A/A

161

TEXT VORTECH SUPERCHARGERS

VORTECH SUPERCHARGERS TEXT

V-7 SUPERCHARGER

V-20 SERIES SUPERCHARGER

PERFORMANCE AT ABSOLUTE SPEED

JT-Trim

YSi-Trim

Impeller Speed (Max.)

60,000

65,000

PSIG (Max.)

Flow CFM (Max.)

1,450

1,600

Horsepower (Approx.)

1,000

1,200

Isentropic Efficiency

75%

78%

The V-7 Series combines the advanced technology and raceproven performance of the V-4 model and fits most of our existing mounting bracketry. The V-7 is designed for vehicles with highly modified engines and extreme CFM/boost demands. All units feature our exclusive D-port volute for improved efficiently and require the use of a Vortech Racing Bypass Valve. The heavy duty (H/D) configuration includes high speed, ceramic hybrid ball bearings, ideal for race applications, i.e. cog pulley/Gilmer drive. Please note: All part numbers are universal units without pulleys

V-7 JT-TRIM SUPERCHARGER

V-7 YSI-TRIM SUPERCHARGER

» Specifically designed for the Ford Mustang 4.6L

» For highly modified racing engines » Low-friction impeller seal allows for

modular racing application

» Counterclockwise rotation » Low-friction impeller seal allows for

» Perfect for “Cog” style supercharger drive systems SATIN FINISH

POLISHED

DESCRIPTION

DISCHARGE

CONFIGURATION

2A159-010

2A159-018

V-7 JT-Trim

Straight

H/D, CCW

V-24 X-Trim

PERFORMANCE AT ABSOLUTE SPEED

V-24 V-24 XX-Trim Z-Trim

V-27 Ysi-Trim

Impeller Speed (Max.) 65,000 65,000 58,000 65,000

V-28 130a

60,000

PSIG (Max.)

Flow CFM (Max.)

1,800

1,950

2,000

1,600

2,700

Horsepower (Approx.) 1,300

1,400

1,450

1,200

1,900

Isentropic Efficiency 79%

78%

77%

78%

The V-20 Series supercharger uses new technology in the form of a modular, ultra robust drive system, designed specifically to accept the abuses of the ultra-high performance 1,000+ horsepower segment primarily found in drag racing. In keeping with the Vortech tradition of world class efficiency, these units all feature a compressor efficiency rating of 77% or greater making them truly second to none. All units in heavy duty (H/D) confi guration include ceramic hybrid ball bearings, ideally suited to racing applications. The V-20 series can accommodate for most existing Vortech compressor stages and features an internal step-up ratio of 4.21:1.

V-24 X-TRIM SUPERCHARGER

“upstream” throttle or draw- through applications

“upstream” throttle or draw-through applications

217

» Perfect for “Cog” style supercharger drive systems » Available in counterclockwise rotation (CCW) SATIN FINISH

POLISHED

DESCRIPTION

DISCHARGE

CONFIGURATION

2A158-060 2A158-070 2A159-050

2A158-068 2A158-078 2A159-058

V-7 YSi-Trim V-7 YSi-Trim V-7 YSi-Trim

Straight Curved Straight

H/D H/D H/D, CCW

» For high-output racing applications » Among the highest insentropic efficiency of all Vortech units » Low-friction impeller seal allows for “upstream” throttle draw-through applications

» Designed for “Cog” style supercharger drive systems SATIN FINISH

POLISHED

DESCRIPTION

DISCHARGE

CONFIGURATION

2G348-010

2G348-018

V-24 X-Trim

Straight

H/D

Please note: All part numbers are universal units without pulleys

V-24 Z-TRIM SUPERCHARGER

» For high-outputracing applications » Low-friction impeller seal allows for

“upstream” throttle draw-through applications

» Designed for “Cog” style supercharger drive systems SATIN FINISH

POLISHED

DESCRIPTION

DISCHARGE

CONFIGURATION

2G368-010

2G368-018

V-24 Z-Trim

Straight

H/D

V-24 XX-TRIM SUPERCHARGER

V-28 130A-TRIM SUPERCHARGER

» For high-output racing applications » Designed for “Cog” style supercharger drive systems

» For racing applications with extreme CFM/boost demands

SATIN FINISH

POLISHED

DESCRIPTION

DISCHARGE

2G348-050 2G349-050

2G348-058 2G349-058

V-24 XX-Trim Straight V-24 XX-Trim Straight

CONFIGURATION

H/D H/D, CCW

V-27 YSI-TRIM SUPERCHARGER

» For high-output racing applications » Designed for “Cog” style supercharger drive systems SATIN FINISH

POLISHED

DESCRIPTION

2G358-010 2G359-010

2G358-018 2G359-018

V-27 Ysi-Trim Straight V-27 Ysi-Trim Straight

DISCHARGE

CONFIGURATION

H/D H/D, CCW

» Largest air inlet opening among all Vortech units » Highest boost and flow potential in the Vortech product line » Unique ‘twin-splitter’ impeller design » Designed for “Cog” style supercharger drive systems SATIN FINISH

POLISHED

DESCRIPTION

2G378-020 2G379-020

2G378-028 2G379-028

V-28 130a-Trim Straight V-28 130a-Trim Straight

DISCHARGE

CONFIGURATION

H/D H/D, CCW

181

TEXT TECHNICAL DRAWINGS & GLOSSARY

Glossary: Trim: Denotes the type of impeller with which the supercharger model is fitted. Because one gearbox and scroll can accept different types of impellers, and because the impeller is crucial in how much and what sort of power is made (high or low rpm, broad or narrow airflow range, and so on), a supercharger’s air output is easily adjusted (trimmed) depending on the impeller fitted. SQ (Super Quiet): This refers to the “helical” cut gear set inside the supercharger (vs. straight cut gears) that results in noise reduction. Type H/D: The heavy duty (H/D) configuration includes high speed, ceramic hybrid ball bearings, ideal for race applications, i.e. cog pulley/Gilmer drive. Type CCW: Counterclockwise supercharger rotation. Type A/A: Air assist configuration aids the supercharger oil drain system by using pressurized air. This is helpful in less than ideal custom supercharger mount.

V-20 SUPERCHARGER

V-5 SUPERCHARGER

V-9 SUPERCHARGER

V-4 SUPERCHARGER

V-1 SUPERCHARGER

V-7 SUPERCHARGER

Note: Drawings are not to scale. Pressure/Flow Performance Data Notes: Pressure and flow performance data was acquired in the Vortech Engineering supercharger test cell to the SAE J-1723 Standard. The isentropic efficiency listed is for straight discharge units, allow 1-2% lower efficiency for curved discharge. Flow and boost ratings are based upon efficiency. Maximum flow, horsepower and boost values shown are based on a minimum compressor efficiency of 60%. These ‘maximum’ values may be exceeded; however, the operating points may drop below 60% efficiency. Vortech considers this to be below the useful range of the compressor. Horsepower data is from engine dyno tests, chassis dyno tests, or is extrapolated from compressor map data. With our rating system, horsepower figures are a relative guide and not an absolute. Superchargers exceeding 6 PSIG require a Vortech standard bypass valve or a Vortech Maxflow Racing bypass valve. Superchargers exceeding 10 PSIG require a Vortech Maxflow Mondo or Maxflow Racing bypass valve. Cog belt drive systems are recommended for all heavy-duty superchargers.

219

TECHNICAL DRAWINGS & GLOSSARY TEXT

20 1

TEXT VORTECH SUPERCHARGERS

FEATURES & COMPARISONS TEXT

SUPERCHARGING SYSTEM OVERVIEW

FEATURES & COMPARISONS

DURABILITY/DRIVEABILITY The centrifugal supercharger system characteristics of progressive and linear power addition allow for peak power targets to be met without overwhelming drivetrain components such as transmission and axle assemblies. This performance curve, directly proportional to engine rpm, allows centrifugal systems to exceed the peak power potential of other boosting options with excellent driveability, performance and less impact on fuel economy. Coupled with our conservative approach to tuning, we have seen many customers exceed 100,000 miles of trouble free motoring.

Each Vortech supercharging system is designed, tested, and sold to be installed on vehicles in their original or otherwise stock form. We have a somewhat conservative approach to tuning, (this being the setting of boost levels, ignition timing, and fuel delivery), referred to as “Safe Boost.” We provide the best performance while maintaining a margin of safety that anticipates most driving conditions that the customer may encounter. We certainly could tune more aggressively to add a few extra horsepower, however, we feel that customer satisfaction would suffer in the long run. Additionally, with Vortech’s compressor efficiency and charge cooler systems, comparable kit performance exceeds competitors’ on-the-edge systems.

STANDARD SYSTEMS

Vortech Standard and High-Ouput (Charge Cooled) Systems are 100% complete, allowing an effortless installation! The following components are among those included:

A charge cooler configuration is included with these highly popular systems. It allows for additional horsepower gains and features a sealed, maintenance-free design. These systems are 50-state emissions legal or in process of this certification.

» Gear driven, centrifugal supercharger with SQ technology

» Supercharger drive system includes all necessary belts,

» Technologically advanced, high-efficiency impeller and

» Oil feed and oil drain assemblies deliver the best possible

provides nearly silent operation and unmatched reliability housing design developed in Vortech’s supercharger test cell

» High-flow bypass valve provides surge-free compressor operation

» Fuel management/calibration components used are

high-capacity fuel injectors, high-flow fuel pump, fuel management unit (FMU), high-flow MAF, ECM chip or module, ECM re-programmer and timing controller (The above items vary per application, see system pages for details)

» Compatible with factory OBD II engine management systems

3-YEAR / 36-THOUSAND MILE WARRANTY Vortech is pleased to announce the availability of a 3-year/36,000 mile powertrain limited warranty with the sale/installation of a complete supercharger system through one of Vortech’s “Top Tier” installation facilities. The program will only be offered by dealers that have demonstrated excellence in the sales, installation and service of Vortech systems. Please refer to the Vortech website for a list of participating installers.

pulleys, idler and tensioner

lubrication and cooling for the supercharger, even under sustained boost conditions

» High-flow air intake configuration with reusable air filter and specially designed inlet ducts for superior fit

» Inlet and discharge duct connections utilize heat resistant silicon sleeves and premium quality stainless steel clamps

» OEM-type cast aluminum or billet aluminum mounting

bracketry for rigidity and a factory installed appearance

These par t numbers are complete systems including all components required for a bolt-on installation by the experienced do-it-yourselfer. All systems are 50-state emissions legal or are in the process of being certified.

HIGH-OUTPUT SYSTEMS (CHARGE COOLED)

THIRD PARTY SYSTEMS Vortech does not make a system for every vehicle on the road. We have selected companies such as Shelby Autos and VF-Engineering to produce systems using a Vortech supercharger for various applications. Warranty is provided by these companies. Visit our website or call Vortech for more information.

BASE KITS Designed for those who already have a Vortech Supercharger, but need the miscellaneous components (brackets, connectors, ducts, hoses, fasteners, etc.) to complete an installation. Fuel management components/electronics are available separately.

TUNER KITS These configurations are designed for those qualified tuners or race shops who do not require the fuel managements items included in our standard systems. Among the items excluded are fuel pump, fuel injectors, FMU, air-inlet assembly (T-Trim models) and ECM programmer or timing controller.

50-STATE EMISSIONS LEGAL Most Vortech systems are emissions legal in all 50 states or have the California Air Resources Board (C.A.R.B.) approval pending on process completion. The Executive Order Number awarded to Vortech systems is D-213-25.

UNCOMPLICATED INSTALLATIONS Systems are designed for easy installation by most car/truck/SUV enthusiasts or automotive technicians. We include every component necessary to modify the appropriate factory components from fuel and ignition management to air intake. Additionally, Vortech maintains a tech line with trained personnel ready to assist and advise those who want to push the limits or need help for competition efforts.

MAINTENANCE Vortech supercharging systems feature a heavy duty engine oil lubrication system ensuring a fresh supply of oil to the supercharger bearings and gears. This ensures maximum durability with virtually no maintenance. In fact, when you change your engine oil, you change the supercharger oil. Owning a Vortech supercharging system is as easy as following your factory maintenance schedules and running premium unleaded fuel.

MODIFIED VEHICLES Vortech supercharging systems are developed using a stock vehicle. Only minor modifications such as a cat-back exhaust system will be compatible with our product. Custom programming (not included) will be required on modified vehicles with aftermarket exhaust headers, computer chip, throttle body, or mass air flow sensor. Also, regarding aftermarket tires and wheels, changing the overall diameter of the drive wheels more than one inch may require custom programming.

HIGH-ALTITUDE OPERATION As a result of the change in atmospheric pressure with an increase in altitude, a drop in boost pressure is common when operating in such cities as Denver, Colorado. A good rule of thumb is that you’ll experience a 1 1/2 to 2 PSIG drop in pressure at an elevation of 5000 feet above sea level.

221

22 1

TEXT VORTECH SUPERCHARGER SYSTEMS

APPLICATIONS GUIDE TEXT

1986-1995 FORD

MUSTANG 5.0L & V6 STREET & RACING

VEHICLE MODEL(S) PART NUMBER

YEAR(S)

SYSTEM DESCRIPTION

STOCK (HP/TQ)

VORTECH (HP/TQ)

BOOST (PSIG)

FUEL MGMT

CARB E.O.

Ford Mustang 5.0L 4FA218-010

1986-1993

V-1 SC-Trim Standard (low-boost)

225/275

275/344

5-6

1,3

D-213-25

4FA218-040SQ

1986-1993

V-2 SQ S-Trim Standard (high-boost)

225/275

331/358

8-10

1,3

D-213-25

4FA218-040T

1986-1993

V-1 T-Trim Standard (high-boost)

225/275

Varies

8-10

1,3

D-213-25

4FA218-070SQ

1986-1993

V-2 SQ S-Trim High-Output

225/275

345/385

8-10

1,3

D-213-25

4FA218-070T

1986-1993

V-1 T-Trim High-Output

225/275

Varies

8-10

1,3

D-213-25

4FG218-020SQ

1994-1995

V-2 SQ S-Trim Standard

215/285

319/370

6-8

1,3

D-213-25

4FG218-020T

1994-1995

V-1 T-Trim Standard

215/285

Varies

6-8

1,3

D-213-25

V-7 YSi-Trim Standard (high-boost)

225/275

Varies

8-10

1,3

D-213-25

Ford Mustang 5.0L S.H.O. 4FA218-200

‘86-95 MUSTANG 5.0L STREET SYSTEMS

These applications are among the most popular Vortech systems available. The entry level 5-6 PSIG, V-1 SC-Trim model is perfect for the budget minded enthusiast. Standard boost systems include the choice of the V-2 SQ S-Trim with nearly silent helical cut gear set or the V-1 T-Trim compressor capable of supporting 825 HP. The S-Trim and T-Trim systems are also available in high-output models with air/water charge cooler. Emissions legal in all 50 states.

1986-1993

Ford Mustang 5.0L Real Street Racing 4FA218-120SQ

1986-1993

V-2 SQ S-Trim Tuner Kit

225/275

Varies

By Tuner

4FA218-120T

1986-1993

V-1 T-Trim Tuner Kit

225/275

Varies

By Tuner

Ford Mustang 5.0L Renegade Racing 4FA218-100

1986-1993

V-7 YSi-Trim Tuner Kit (Passenger side)

225/275

Varies

By Tuner

4FA218-110

1986-1993

V-7 YSi-Trim Tuner Kit (Driver’s side)

225/275

Varies

By Tuner

V-2 SQ S-Trim Standard

150/215

215/259

8-9

2,5

D-213-25

Ford Mustang V6 3.8L 4FF218-010SQ

1994-1995

Fuel Mgmt - 1. High-flow fuel pump, 2. High-capacity fuel injectors, 3. Fuel management unit (FMU), 4. High-flow MAF, 5. ECM chip or module, 6. ECM re-programmer, 7. Timing controller

Supercharged horsepower and torque data shown above is a calculated estimate based on percentage increases from actual rear wheel hp/tq measurements.

» Brian Meyer “Ragdoll Racing” V-2 SQ S-Trim Supercharger

2005 & 2006 NMRA Real Street Champion/World Record Holder

‘86-93 MUSTANG 5.0L REAL STREET RACING

Specifically configured for those competing in Real Street racing classes. The 680+ horsepower capable V-2 SQ S-Trim supercharger is included along with all necessary assemblies except fuel or ignition control. This system is not compatible with factory emissions equipment and includes the Vortech 1-year supercharger limited warranty. User must supply AFM PowerPipe® or similar unit.

Tuner Kits do not include any fuel management components (injectors, fuel pump, FMU, etc.) and require custom (dyno) tuning by a specialist. Some of these configurations include a high-output compressor, i.e. T-Trim and/or higher boost producing pulleys. Tuner Kits are not smog legal. Please call for specific applications.

1986-1993 FORD MUSTANG 5.0L RENEGADE RACING

Renegade Racing Driver Side System Includes: » Dual plate billet aluminum mounting bracket assembly » 8-Rib / 8” aluminum crank pulley assembly with drive-belt, idler, tensioner and hardware » Cast aluminum alternator mounting bracket system » Accessory belt idler pulley with mount » Radiator tube & thermostat housing assembly

Vortech’s 1200 horsepower capable systems are designed for those racers competing in EFI/Renegade racing classes. Two configurations available: driver side mounted or passenger side mounted supercharger. Both systems include a Vortech V-7 YSi-Trim supercharger, 8-Rib / 3” Renegade supercharger pulley, and complete oil drain/feed assemblies. These racing systems include the Vortech 1-year supercharger limited warranty.

Driver side system notes: Supercharger pulleys (2.70”, 2.75”, 2.80”, 2.85”, 2.95”, 3.15”) are available separately. This system does not include fuel or ignition system, compressor bypass valve, air filter, air inlet/discharge ducting or MAF mounting provisions. An aftermarket electric fan is recommended. However, the factory mechanical fan may be retained with minor clearance modifications.

Renegade Racing Passenger Side System Includes: » Dual plate billet aluminum mounting bracket assembly » 8-Rib / 8” aluminum crank pulley » 3 1/4” high-volume race discharge tube » Maxflow mondo bypass valve assembly » 4” high-flow air inlet elbow with bypass valve air-return boss

» 1986-1993 Ford Mustang 5.0L V-2 SQ S-Trim Standard

» 1994-1995 Ford Mustang GT 5.0L V-2 SQ S-Trim Standard

» 1986-1993 Ford Mustang 5.0L Renegade Racing System

» Brian Mitchell V-7 YSi-Trim Supercharger

2004, 2006 & 2007 NMRA EFI Renegade Champion

Passenger side system notes: The inlet elbow adapts to the Anderson Ford Power Pipe™. Supercharger pulleys (2.70”, 2.75”, 2.80”, 2.85”, 2.95”, 3.15”) are available separately. This system does not include fuel or ignition assemblies, air filter or MAF mounting provisions. Installation may require an aftermarket water pump pulley for proper belt clearance. An aftermarket electric fan is recommended. However, the factory mechanical fan may be retained with minor clearance modifications.

23 2

24 1

APPLICATIONS GUIDE TEXT

TEXT VORTECH SUPERCHARGER SYSTEMS

1996-2008

FORD MUSTANG GT & V6

VEHICLE MODEL(S) PART NUMBER

YEAR(S)

SYSTEM DESCRIPTION

STOCK (HP/TQ)

VORTECH (HP/TQ)

BOOST (PSIG)

FUEL MGMT

CARB E.O.

Ford Mustang GT 4.6L 2V 4FH218-010SQ

1996-1997

V-2 SQ S-Trim Standard

215/265

290/345

7-9

1,3

D-213-25

4FH218-050SQ

1996-1998

V-2 SQ S-Trim High-Output

215/265

323/365

9-10

1,3

D-213-25

4FH218-070SQ

1998

V-2 SQ S-Trim Standard

225/265

300/345

7-9

1,3

D-213-25

4FL218-010SQ

1999

V-2 SQ S-Trim Standard

260/302

364/371

7-9

1,2,5

D-213-25

4FL218-030SQ

1999

V-2 SQ S-Trim High-Output

260/302

402/400

9-10

1,2,5

D-213-25

4FL218-130SQ

2000-2004

V-2 SQ S-Trim Standard

260/302

364/371

7-9

1,2,5

D-213-25

4FL218-140SQ

2000-2004

V-2 SQ S-Trim High-Output

260/302

402/400

9-10

1,2,5

D-213-25

420/385

8.5-9.5

1,2,4,6

D-213-25

Ford Mustang GT 4.6L 3V 4FU218-010SQ

2005-2006

V-2 SQ S-Trim Standard

300/320

4FU218-020SQ

2005-2006

V-2 SQ S-Trim High-Output

300/320

462/419

9.5-10.5

1,2,4,6

D-213-25

4FU218-030SQ

2007

V-2 SQ S-Trim Standard

300/320

420/385

8.5-9.5

1,2,4,6

D-213-25

4FU218-040SQ

2007

V-2 SQ S-Trim High-Output

300/320

462/419

9.5-10.5

1,2,4,6

D-213-25

4FU218-030XPSQ

2008*

V-2 SQ S-Trim Standard

300/320

420/385

8.5-9.5

1,2,4,6

D-213-25

4FU218-040XPSQ

2008*

V-2 SQ S-Trim High-Output

300/320

462/419

9.5-10.5

1,2,4,6

D-213-25

Ford Mustang V6 3.8L

» Photo by Peter S. Linney (AutoFocus)

4FF218-010SQ

1996-1998

V-2 SQ S-Trim Standard

150/215

215/259

8-9

2,5

D-213-25

4FF218-020SQ

1999-2000

V-2 SQ S-Trim Standard

193/225

278/286

8.5-9

1,3

D-213-25

Ford Mustang V6 4.0L 4FU218-610SQ

2005-2006

V-2 SQ S-Trim Standard

210/240

290/294

1,2,4,6

D-213-25

4FU218-620SQ

2005-2006

V-2 SQ S-Trim High-Output

210/240

330/337

1,2,4,6

D-213-25

4FU218-630SQ

2007

V-2 SQ S-Trim Standard

210/240

290/294

1,2,4,6

D-213-25

4FU218-640SQ

2007

V-2 SQ S-Trim High-Output

210/240

330/337

1,2,4,6

D-213-25

Fuel Mgmt - 1. High-flow fuel pump, 2. High-capacity fuel injectors, 3. Fuel management unit (FMU), 4. High-flow MAF, 5. ECM chip or module, 6. ECM re-programmer, 7. Timing controller

Supercharged horsepower and torque data shown above is a calculated estimate based on percentage increases from actual rear wheel hp/tq measurements. Tuner Kits are available for many of the systems listed above. These kits do not include any fuel management components (injectors, fuel pump, FMU, etc.) and require custom (dyno) tuning by a specialist. Some of these configurations include a high-output compressor, i.e. T-Trim and/or higher boost producing pulleys. Tuner Kits are not smog legal. Please call for specific applications. Most systems are available with polished finish components. The part numbers listed above are for satin finish systems. Replace “0” with an “8” in the last digit position of the part number, e.g. -010 for satin and -018 for polished. *At the time of printing, 2008 Mustang GT systems available for manual trans and in process of C.A.R.B. certification.

» 1994-2000 Ford Mustang V6 3.8L V-2 SQ S-Trim Standard

» 1996-1998 Ford Mustang GT 4.6L V-2 SQ S-Trim High-Output

» 1999-2004 Ford Mustang GT 4.6L V-2 SQ S-Trim High-Output

» 2005-2008 Ford Mustang GT 4.6L 3V V-2 SQ S-Trim Standard

» 2005-2008 Ford Mustang GT 4.6L 3V V-2 SQ S-Trim High-Output

25 2

26 1

APPLICATIONS GUIDE TEXT

TEXT VORTECH SUPERCHARGER SYSTEMS

1993-2004 FORD

SPECIALTY MUSTANG COBRA, BULLITT, & MACH 1

VEHICLE MODEL(S) PART NUMBER

YEAR(S)

SYSTEM DESCRIPTION

STOCK (HP/TQ)

VORTECH (HP/TQ)

BOOST (PSIG)

FUEL MGMT

CARB E.O.

Ford Mustang Cobra 5.0L 4FA218-030SQ

1993

V-2 SQ S-Trim Standard

235/285

376/400

8-10

1,3

D-213-25

4FA218-080SQ

1993

V-2 SQ S-Trim High-Output

235/285

405/420

8-10

1,3

D-213-25

4FA218-030T

1993

V-1 T-Trim Standard

235/285

Varies

8-10

1,3

D-213-25

4FG218-020SQ

1994-1995

V-2 SQ S-Trim Standard

240/285

344/370

6-8

1,3

D-213-25

4FG218-020T

1994-1995

V-1 T-Trim Standard

240/285

Varies

6-8

1,3

D-213-25

Ford Mustang Cobra 4.6L 4FK218-010SQ

1996-1997

V-2 SQ SC-Trim Standard

305/285

442/390

7-9

1,3,5

D-213-25

4FK218-050SQ

1996-1998

V-2 SQ S-Trim High-Output

305/285

484/423

9-11

1,3,5

D-213-25

4FK218-080SQ

1998

V-2 SQ SC-Trim Standard

305/285

442/390

7-9

1,3,5

D-213-25

4FR218-010SQ

1999

V-2 SQ E-Trim Standard

320/317

464/406

7.5-8.5

1,2,4,5

D-213-25

4FR218-020SQ

1999

V-2 SQ SC-Trim High-Output

320/317

490/420

9.5-10.5

1,2,4,5

D-213-25

4FR218-030SQ

2001

V-2 SQ E-Trim Standard

320/317

464/406

7.5-8.5

1,2,4,5

D-213-25

4FR218-040SQ

2001

V-2 SQ SC-Trim High-Output

320/317

490/420

9.5-10.5

1,2,4,5

D-213-25

4FR218-140TSQ*

2003-2004

V-2 SQ T-Trim High-Output Tuner Kit

390/390

Varies

14-16

By Tuner

Ford Mustang Bullitt 4.6L 4FL218-070SQ

2001

V-2 SQ S-Trim Standard

265/305

390/396

8-9

1,2,5

D-213-25

4FL218-080SQ

2001

V-2 SQ S-Trim High-Output

265/305

415/402

9-10

1,2,5

D-213-25

Ford Mustang Mach 1 4.6L 4FR218-080SQ

2003-2004

V-2 SQ SC-Trim Standard

305/320

460/406

7.5-8.5

1,2,4,5

D-213-25

4FR218-090SQ

2003-2004

V-2 SQ SC-Trim High-Output

305/320

484/420

9.5-10.5

1,2,4,5

D-213-25

Fuel Mgmt - 1. High-flow fuel pump, 2. High-capacity fuel injectors, 3. Fuel management unit (FMU), 4. High-flow MAF, 5.ECM chip or module, 6. ECM re-programmer, 7. Timing controller

» 2003-2004 Mach 1 Auxiliary Airduct Kit For standard and high-output systems. Cast aluminum base duplicates factory mounting location and provides an air path from the hood scoop to the air filter.

*This tuner kit replaces the OEM roots-type supercharger/charge cooler package with a Vortech V-2 SQ T-Trim supercharger/charge cooler configuration. Please call for installation specifics.

4FR112-041 Satin, 4FR112-048 Polished

» 1996-1998 Ford Mustang Cobra 4.6L V-2 SQ S-Trim High-Output

» 1993 Ford Mustang Cobra 5.0L V-2 SQ S-Trim High-Output

» 1994-1995 Ford Mustang Cobra 5.0L V-2 SQ S-Trim Standard

» 1996-1998 Ford Mustang Cobra 4.6L V-2 SQ S-Trim High-Output

» 1999 & 2001 Ford Mustang Cobra 4.6L V-2 SQ SC-Trim High-Output

27 2

28 1

TEXT VORTECH SUPERCHARGER SYSTEMS

APPLICATIONS GUIDE TEXT

1987-2006

FORDTRUCK & LINCOLN & SUV

VEHICLE MODEL(S) PART NUMBER

YEAR(S)

SYSTEM DESCRIPTION

STOCK (HP/TQ)

VORTECH (HP/TQ)

BOOST (PSIG)

FUEL MGMT

CARB E.O.

Ford F-Series Truck, SUV 4FE218-070SQ

1987-1996

5.0L V-2 SQ S-Trim Standard

185/270

260/344

5-6

1,3

D-213-25

4FC218-030SQ

1987-1996

5.8L V-2 SQ S-Trim Standard

200/300

281/371

5-6

1,3

D-213-25

4FB218-040SQ

1987-1997

7.5L V-2 SQ S-Trim Standard

230/385

311/450

4-5

1,3

D-213-25

V-2 SQ S-Trim Standard

245/360

345/440

5-6

1,3

D-213-25

Ford Lightning 5.8L 4FC218-040SQ

1993-1995

Ford F-150, F-250 LD, Expedition 4.6L 4FM218-010SQ

1997-1998

V-2 SQ S-Trim Standard

210/290

284/377

6-8

1,3

D-213-25

4FM218-040SQ

1999-2002

V-2 SQ S-Trim Standard

210/290

284/377

6-8

1,3,5

D-213-25

Ford F-150, F-250 LD, Expedition 5.4L 2V / Lincoln Navigator 5.4L 2V 4FM218-020SQ

1997-1998

V-2 SQ S-Trim Standard

230/325

322/419

6-8

1,3

D-213-25

4FM218-030SQ

1999-2003

V-2 SQ S-Trim Standard

260/345

375/441

6-8

1,3,5

D-213-25

2004-2006

V-2 SQ S-Trim High-Output

300/365

429/473

8.5

2,6

D-213-25

375/441

6-8

1,3,5

D-213-25

Ford F-150 5.4L 3V 4FN218-020SQ

Ford F-250, F-350, Super Duty, Excursion 4FT218-010SQ

1999-2001

5.4L V-2 SQ S-Trim Standard

260/345

4FT218-020SQ*

1999-2003

6.8L V-2 SQ S-Trim Standard

310/425

425/515

8-9

1,3,5

D-213-25

4FT218-030SQ*

1999-2003

6.8L V-2 SQ S-Trim High-Output

310/425

464/542

8-9

1,3,5

D-213-25

Fuel Mgmt - 1. High-flow fuel pump, 2. High-capacity fuel injectors, 3. Fuel management unit (FMU), 4. High-flow MAF, 5.ECM chip or module, 6. ECM re-programmer, 7. Timing controller

Supercharged horsepower and torque data shown above is a calculated estimate based on percentage increases from actual rear wheel hp/tq measurements. *Supercharging systems are not available for 2002 Ford 6.8L F-250, F-350, Super Duty and Excursion. Tuner Kits are available for the F-150 5.4L 3V Truck. These kits do not include any fuel management components (injectors, fuel pump, FMU, etc.) and require custom (dyno) tuning by a specialist. Tuner Kits are not smog legal.

» 1987-1997 Ford F-Series & SUV 7.5L V-2 SQ S-Trim Standard

» 1997-2002 Ford F-Series & SUV 4.6L V-2 SQ S-Trim Standard

» 1993-1995 Ford Lightning 5.8L V-2 SQ S-Trim Standard

» 1999-2001 Ford Super Duty & Excursion V-2 SQ S-Trim Standard

» 1999-2001 Ford Super Duty 6.8L V-2 SQ S-Trim High-Output

29 2

30 1

TEXT VORTECH SUPERCHARGER SYSTEMS

APPLICATIONS GUIDE TEXT

1992-2007

CHEVROLET CORVETTE LT1, LS1, LS2, LS6 & LS7

VEHICLE MODEL(S) PART NUMBER

YEAR(S)

SYSTEM DESCRIPTION

STOCK (HP/TQ)

VORTECH (HP/TQ)

BOOST (PSIG)

FUEL MGMT

CARB E.O.

Chevrolet Corvette 5.7L LT1 (These systems are available in polished finish only) 4GV218-078SQ

1992-1993

V-2 SQ S-Trim Standard

300/340

425/433

6-8

1,2,3

D-213-25

4GV218-088SQ

1994-1996

V-2 SQ S-Trim Standard

300/340

425/433

6-8

1,3

D-213-25

Chevrolet Corvette C5 5.7L LS1 4GR218-030SQ

1997-1998

V-2 SQ S-Trim High-Ouput

345/350

494/473

2,6

D-213-25

4GR218-040SQ

1999-2000

V-2 SQ S-Trim High-Ouput

345/350

494/473

2,6

D-213-25

4GR218-020SQ

2001-2004

V-2 SQ SC-Trim High-Ouput

345/350

494/473

2,6

D-213-25

V-2 SQ SC-Trim High-Ouput

405/400

538/483

6.5

2,6

D-213-25

Chevrolet Corvette Z06 5.7L LS6 4GR218-010SQ

2001-2004

Chevrolet Corvette C6 6.0L LS2 4GS218-010SQ

2005

V-2 SQ T-Trim High-Ouput

400/400

550/472

2,6

D-213-25

4GS218-030SQ

2006-2007*

V-2 SQ T-Trim High-Ouput

400/400

550/472

2,6

D-213-25

V-2 SQ T-Trim High-Ouput

505/470

635/540

6.5

2,6

D-213-25

V-2 SQ S-Trim High-Ouput

350/365

490/475

7.5-8.5

2,6

D-213-25

Chevrolet Corvette Z06 7.0L LS7 4GS218-020SQ

2006-2007*

Pontiac GTO 5.7L LS1 4GJ218-010SQ

2004

Fuel Mgmt - 1. High-flow fuel pump, 2. High-capacity fuel injectors, 3. Fuel management unit (FMU), 4. High-flow MAF, 5. ECM chip or module, 6. ECM re-programmer, 7. Timing controller

Supercharged horsepower and torque data shown above is a calculated estimate based on percentage increases from actual rear wheel hp/tq measurements. Tuner Kits are available for some of the systems listed above. These kits do not include any fuel management components (injectors, fuel pump, FMU, etc.) and require custom (dyno) tuning by a specialist. Some of these configurations include a high-output compressor, i.e. T-Trim and/or higher boost producing pulleys. Tuner Kits are not smog legal. Please call for specific applications. NOTE: Installation on 1996 LT1 Corvettes may require the purchase of a mass air sensor signal massager 4GM020-030. *At the time of printing, 2007 systems in process of C.A.R.B. certification.

2004 PONTIAC

GTO 5.7L

» 1997-2004 Chevrolet Corvette C5 & Z06 V-2 SQ SC-Trim High-Output

» 1992-1996 Chevrolet Corvette 5.7L LT1 V-2 SQ S-Trim Standard

» 1997-2004 Chevrolet Corvette C5 & Z06 V-2 SQ SC-Trim High-Output

231

32 1

TEXT VORTECH SUPERCHARGER SYSTEMS

APPLICATIONS GUIDE TEXT

1988-2002 CHEVROLET & PONTIAC

CAMARO & FIREBIRD TPI, LT1 & LS1

VEHICLE MODEL(S) PART NUMBER

YEAR(S)

SYSTEM DESCRIPTION

STOCK (HP/TQ)

VORTECH (HP/TQ)

BOOST (PSIG)

FUEL MGMT

CARB E.O.

245/345

340/430

6-8

1,3

D-213-25

Chevrolet Camaro 5.7L TPI / Pontiac Firebird 5.7L TPI (also fits 5.0L) 4GF218-060SQ

1988-1992

V-2 SQ S-Trim Standard

Chevrolet Camaro 5.7L LT1 / Pontiac Firebird 5.7L LT1 4GH218-050SQ

1993

V-2 SQ S-Trim Standard

275/330

385/395

6-7

1,2,3

D-213-25

4GH218-080SQ

1993

V-2 SQ S-Trim High-Ouput

275/330

400/405

6-7

1,2,3

D-213-25

4GH218-050T

1993

V-1 T-Trim Standard

275/330

385/395

6-7

1,2,3

D-213-25

4GH218-060SQ

1994-1997

V-2 SQ S-Trim Standard

275/330

385/395

6-7

1,3

D-213-25

4GH218-090SQ

1994-1997

V-2 SQ S-Trim High-Ouput

275/330

400/405

6-7

1,3

D-213-25

4GH218-060T

1994-1997

V-1 T-Trim Standard

275/330

385/395

6-7

1,3

D-213-25

4GH218-110T

1994-1997

V-1 T-Trim High-Output

275/330

400/405

6-7

1,3

D-213-25

Chevrolet Camaro 5.7L LS1 / Pontiac Firebird 5.7L LS1 4GK218-010SQ

1998-2002

V-9 SQ G-Trim Standard

320/345

418/414

5-6

1,2,6

D-213-25

4GK218-060SQ

1998-2000

V-9 SQ G-Trim High-Ouput

320/345

470/462

8-9

1,2,6

D-213-25

4GK218-080SQ

2001-2002

V-9 SQ G-Trim High-Ouput

320/345

470/462

8-9

1,2,6

D-213-25

Fuel Mgmt - 1. High-flow fuel pump, 2. High-capacity fuel injectors, 3. Fuel management unit (FMU), 4. High-flow MAF, 5. ECM chip or module, 6. ECM re-programmer, 7. Timing controller

Supercharged horsepower and torque data shown above is a calculated estimate based on percentage increases from actual rear wheel hp/tq measurements. Tuner Kits are available for some of the systems listed above. These kits do not include any fuel management components (injectors, fuel pump, FMU, etc.) and require custom (dyno) tuning by a specialist. Some of these configurations include a high-output compressor, i.e. T-Trim and/or higher boost producing pulleys. Tuner Kits are not smog legal. Please call for specific applications. PLEASE NOTE: High-Ouput systems will not fit vehicles with traction control. 1995-1997 LT1 Camaros and Firebirds with traction control will require the purchase of an aftermarket traction control relocation kit. Call Vortech for assistance.

1996-1997 LT1 Camaros and Firebirds may require the purchase of a mass air sensor signal massager 4GM020-030. 1998-2002 Camaros equipped with “ram air” hoods will require significant bottomside hood modifications to the ram ducting for system clearance. Camaros equipped with standard hoods may require minor bottom-side hood support alteration for proper fit.

» 1998-2002 Camaro/Firebird 5.7L LS1 V-9 SQ G-Trim High-Output

» 1988-1992 Chevrolet Camaro

& Pontiac Firebird 5.0/5.7L TPI V-2 SQ S-Trim Standard

» 1993-1997 Chevrolet Camaro & Pontiac Firebird 5.7L LT1 V-2 SQ S-Trim High-Output

» 1998-2002 Chevrolet Camaro & Pontiac Firebird 5.7L LS1 V-9 SQ G-Trim High-Output

Hot Rod Magazine Editor-In-Chief, David Freiburger, drove a Vortech supercharged 1980 Camaro to a record setting two-way average of 243.015 MPH at the 54th Annual Bonneville Speed Week, competing in the B/Classic Blown Gas Altered class. Prior to Speed Week, Freiburger’s Camaro became the fastest passenger car in any standing-mile event with 213.442 mph at the Texas Mile.

33 2

34 1

TEXT VORTECH SUPERCHARGER SYSTEMS

APPLICATIONS GUIDE TEXT

CHEVROLET SMALL BLOCK

GM-SPEC V8 CARBURETED

This GM-Spec blow-through system produces horsepower gains that range from 30% to more than 75%, depending on boost level and volumetric efficiency. It now offers simple integration with factory V-belt or serpentine accessory drive configurations (see notes and tuning tips). The supplied pulley ratio will produce approximately 8-10 PSI at 5500 rpm on mildly modified 350 c.i. engines. The Vortech V-2 SQ (Super Quiet) S-Trim, V-1 T-Trim, or V-7 YSi-Trim compressor with 3.33” pulley are offered in the satin or polished finish systems.

Custom finished components shown.

Notes and Tuning Tips: This system can be used on engines with or without power steering. OEM Saginaw-type power steering pumps can be attached to the Vortech mounting bracket with the supplied hardware kit. For engines equipped with power steering and V-belt accessory drives, a Saginaw pump as well as an optional Vortech power steering pulley assembly (4GP110-051) will be required. That part number includes all required hardware, tensioner assembly and anodized billet aluminum pulley. Depending on the vehicle, power steering lines may require fabrication. These blow-through systems are designed to fit on engines using a “long” water pump and OEM V-belt drives, or GM Performance Parts serpentine accessory drive system P/ Ns 12497697, 12497698 and 12497869. (These GMPP part numbers are common with 19901995 OEM TPI/TBI applications). When using the GMPP serpentine system, a shorter 6-Rib drive belt is required, Vortech P/N 2A046-101. For correct belt alignment, the proper accessory drive crank pulley and accessory bracketry must be used, not supplied in these systems. Earlier models equipped with “short” water pumps will require a “long” water pump to be installed.

These systems include a cast aluminum carburetor enclosure assembly for use with Holley #4150-type, Quick Fuel Q-QFT-750-BAN or Demon 750 MD carburetor. The enclosure pressurizes the float bowls and throttle shafts for a seamless response and correct air/fuel ratio. This results in a consistent fuel curve for more power than an ordinary “bonnet”. Our enclosure also features front and rear -8 AN fuel inlet ports as well as multiple locations for pressure/vacuum connections. Linkage arms, splined shaft, and left/right hand spherical rod ends are included for simple throttle connection and adjustment. Carburetor studs are also supplied and available separately. (Fuel line fitting kit is required and sold separately). Additional components include a cast aluminum mounting bracket with hardware, 10-Rib, 6061-T6 billet aluminum 6” diameter supercharger crank pulley in hard anodize finish, integrated manual belt tensioner assembly with dual bearing tensioner pulley plus 10-Rib belt, molded 3-ply fiberglass reinforced silicone discharge hose with clamps and an air inlet assembly with elbow, clamps, silicone sleeve with reusable air filter. Please note: Polished finish systems include the discharge tube shown on the engine below and a 3-ply fiberglass reinforced silicone discharge hose (not pictured) for universal installation. “Putting a Vortech S-trim on a GM HT383 crate engine and picking up 200hp and 120 lb-ft on pump gas was an eye-opener, making me change plans and build a new small block drag engine as a blow-through instead of a nitrous combo.” - David Freiburger, Editor-In-Chief, Hot Rod Magazine APPLICATIONS INCLUDE: » 1967-1973 Camaro/Firebird (1967-1969 w/cowl hood) » 1964-1972 Chevelle » 1955-1957 Sedan (Bel Air, 210, etc.) » 1968-1972 Nova/Chevy II With approximately 22” from crank center line to the top of the enclosure, this system fits under the factory hood.

The supplied silicone supercharger discharge hose was engineered to fit a range of manifold heights. Minor trimming may be required for optimum fit. A properly jetted #4150-type carburetor must include mechanical secondaries, .120 needle and seat, plus a nitrophyll float set. For 1967-1969 Camaro/Firebird applications, in addition to the cowl hood, minor under hood trimming may be necessary and we recommend using an Edelbrock Victor Jr. manifold. For best results we suggest a compression ratio range of 8:1 to 9.5:1 with 9:1 being ideal. A mild “street” camshaft is best since a centrifugal supercharger by nature doesn’t require a lot of overlap for maximum efficiency. On early engines, a high-performance, boost referenced mechanical fuel pump will provide the necessary fuel in most applications. Late model motors may require an electrical fuel pump and a boost referenced fuel pressure regulator producing 6 lbs. of pressure static and one additional pound of fuel pressure per pound of boost. Example: 6 lbs. static fuel pressure + 5 lbs. boost pressure = 11 PSI fuel.

35 2

Small Block GM-Spec V8 Carbureted – Supercharging Systems 4GP218-030SQ 4GP218-038SQ 4GP218-030T 4GP218-038T 4GP218-030YSi 4GP218-038YSi

V-2 SQ S-Trim Universal System – Satin V-2 SQ S-Trim Universal System – Polished V-1 T-Trim Universal System – Satin V-1 T-Trim Universal System – Polished V-7 YSi-Trim Universal System – Satin V-7 YSi-Trim Universal System – Polished

Fuel Line Fitting Kit (Required) Fuel line fitting kit includes custom bent stainless steel lines, billet -8 AN bulkhead adapter with fuel pressure port and plug, -8/-6 AN junction tee, aluminum swivel hose ends and USCG approved fuel hose. 8M110-020 Holley #4150 (w/Dual Metering Blocks) / Quick Fuel-type Fuel Line Fitting Kit 8M110-030 Demon MD-type Fuel Line Fitting Kit OPTIONAL COMPONENTS (Call for proper application match) Supercharger Pulley 2A031-250 2.50” Diameter 10-Rib Pulley 2A031-275 2.75” Diameter 10-Rib Pulley 2A031-295 2.95” Diameter 10-Rib Pulley 2A031-312 3.12” Diameter 10-Rib Pulley 4MA018-041 6.00” Diameter 10-Rib Crank Pulley 4MA018-051 7.00” Diameter 10-Rib Crank Pulley 4MA018-061 7.80” Diameter 10-Rib Crank Pulley

Reference Chart for Optional Belt and Pulley Combinations: Crank Pulley

Vortech Belt

Gates Belt

Supercharger Pulley

6 inch

2A041-579*

K100579

2A031-295, 2A031-312, 2A031-333*

2A041-572

K100572

2A031-275, 2A031-295

N/A

K100575

2A031-250, 2A031-275, 2A031-295, 2A031-312

2A041-594

K100594

2A031-333, 2A031-275

2A041-607 *Supplied in systems.

K100607

2A031-312

7 inch

Compressor Bypass Valve and Flange (Recommended) To provide simple attachment to the silicone discharge elbow supplied in our systems, use our 3” aluminum discharge duct with attached flange (4GP012-031) to attach the Vortech bypass valve. (See page 44 for more information and contact our tech support department to determine proper valve selection per application) 8D204-001 Maxflow Racing Bypass Valve 8D004-052 Maxflow Racing Bypass Weld-on Flange (Aluminum) 8D103-001 Maxflow Mondo Bypass Valve 8D003-052 Maxflow Mondo Bypass Weld-on Flange (Aluminum) 8D205-005 Maxflow bv57 Bypass Valve 8D005-051 Maxflow bv57 Bypass Weld-on Flange (Aluminum) Power Steering Pulley and Hardware Assembly 4GP110-051

Power Steering Pulley Assembly

Aftermarket Performance Components (Recommended)

5A001-008 8F001-305 8M011-001

Crane Hi-6 Ignition Amplifier Box with Rev-Limiter High-Performance Mechanical Fuel Pump (Boost Referenced) Air Diffuser for Holley #4150-type Carburetor, Straightens Airflow Into the Carburetor for Improved Response and Driveability

Carburetor Enclosures 8M205-012 8M205-018 8M205-020 8M205-028 8M205-030 8M205-038 8M205-050 8M205-058

Carburetor Enclosure Only – Satin Finish Carburetor Enclosure Only – Polished Finish Carburetor Enclosure with Holley #4150/Quick Fuel-type Fuel Lines – Satin Carburetor Enclosure with Holley #4150/Quick Fuel-type Fuel Lines – Polished Carburetor Enclosure with Demon-type Fuel Lines – Satin Carburetor Enclosure with Demon-type Fuel Lines – Polished Carburetor Enclosure, Dominator-type, w/o Fuel Lines - Satin Carburetor Enclosure, Dominator-type, w/o Fuel Lines - Polished

36 1

TEXT VORTECH SUPERCHARGER SYSTEMS

CHEVROLET BIG BLOCK

GM-SPEC V8 CARBURETED The Vortech blow-through carbureted supercharger system will provide an increase in horsepower ranging from 30% to more than 75% depending on boost level and volumetric efficiency.

APPLICATIONS GUIDE TEXT

Notes and Tuning Tips: Minor bottom side hood suppor t modifications may be required depending upon the type of intake manifold installed (low-rise is recommended). If this system is installed on an engine equipped with a “short” water pump, a custom accessory drive crank pulley and spacer will be required (not available from Vortech). For engines with power steering, a remote reservoir (GM “type 2”) style pump will be required as well as an optional Vortech power steering pump bracket and pulley assembly. Depending on the vehicle, power steering lines may require fabrication. Power steering pump: OE on 1987 GM Pontiac Sunbird, NAPA #20-874 Vortech power steering bracket/pulley assembly: 4GA110-010. A properly jetted #4150-type carburetor must include mechanical secondaries, .120 needle and seat plus a nitrophyll float set. Also, a high-performance, boost referenced fuel pump is required.

These big block systems include a cast aluminum carburetor enclosure assembly for use with Holley #4150-type, Quick Fuel Q-QFT-850-BAN or Demon 825 MD carburetor. The enclosure pressurizes the float bowls and throttle shafts for seamless response and correct air/fuel ratio. This results in a consistent fuel curve for more power than an ordinary “bonnet”. Our enclosure also features front and rear -8 AN fuel inlet ports as well as multiple locations for pressure/vacuum connections. Linkage arms, splined shaft, and left/right hand spherical rod ends are included for simple throttle connection and adjustment. Carburetor studs are also supplied and available separately. (Fuel line fitting kit is required and sold separately). The V-7 YSi-Trim compressor includes a 3.33” diameter 10-Rib pulley. Other components include a 3/8” thick, nickel plated, supercharger mounting plate, cast aluminum mounting bracketry/hardware plus 3.5” diameter cast aluminum discharge duct assembly with heat resistant silicon sleeves and premium stainless steel clamps. Also included is a 7” diameter, 10-Rib, 6061-T6 billet aluminum supercharger crank pulley, three-groove, accessory drive crank pulley, pulley spacer plus integrated manual belt tensioner with dual bearing tensioner pulley. While these systems were designed in a “long-type” water pump configuration, “short” water pump adaptability is possible. Also, modifications can be made to run power steering, see notes.

APPLICATIONS INCLUDE: » 1964-1972 Chevelle/Malibu with cowl induction hood With slightly over 23” from crank center line to the top of the enclosure, this system fits under the factory cowl induction hood.

We suggest a compression ratio range of 8:1 to 9.5:1 with 9:1 being ideal. A mild “street” camshaft is best for maximum efficiency. Accessory v-belts may be required depending on accessory configuration and supercharger pulley diameters. Late model motors may require an electrical fuel pump and a boost referenced fuel pressure regulator producing 6 lbs. of pressure static and one additional pound of fuel pressure per pound of boost. Example; 6 lbs. static fuel pressure + 5 lbs. boost pressure = 11 PSI fuel.

37 2

Big Block V8 Carbureted – Supercharging Systems 4GA218-020 4GA218-028

V-7 YSi-Trim Universal System – Satin V-7 YSi-Trim Universal System – Polished

The following is a list of parts that are not included, but may be required to complete the installation:

Supercharger Pulley

(Contact Vortech for proper application match) 2.75” Diameter 10-Rib Pulley 2.95” Diameter 10-Rib Pulley 3.12” Diameter 10-Rib Pulley 3.47” Diameter 10-Rib Pulley 6.00” Diameter 10-Rib Crank Pulley 7.00” Diameter 10-Rib Crank Pulley (included in system)

2A031-275 2A031-295 2A031-312 2A031-347 4MA018-041 4MA018-051

Belt and Pulley Combinations - Modified Heads/Cam Engines Crank Pulley

Vortech Belt

Gates Belt

Supercharger Pulley

Boost Level*

7 inch

2A041-618

K100618

3.33”

5 PSI

2A041-618

K100618

3.12”

7-8 PSI

2A041-618

K100618

2.95”

9-10 PSI

2A041-607

K100607

2.75”

11+ PSI

*Approximate Boost level (454 c.i. V8@5200 rpm max.) Compressor Bypass Valve and Flange (Recommended) See page 44 for more information and contact our tech support department to determine proper valve selection per application. 8D204-001 Maxflow Racing Bypass Valve 8D004-052 Maxflow Racing Bypass Weld-on Flange (Aluminum) 8D103-001 Maxflow Mondo Bypass Valve 8D003-052 Maxflow Mondo Bypass Weld-on Flange (Aluminum)

Aftermarket Performance Components (Recommended) 5A001-008 8M011-001

Crane Hi-6 Ignition Amplifier Box with Rev-Limiter Air Diffuser for Holley #4150-type Carburetor, Straightens Airflow Into the Carburetor for Improved Response and Driveability

Supercharger Air Inlet Ducting/Air Filter 7S400-000 7S400-001 7S400-200 8H040-095 8H040-097 8H040-190

4” x 90° Cast Aluminum Inlet Elbow (3.5” CL Radius) 4” x 90° Rubber Inlet Elbow 4” x 2” Silicone Sleeve Air Filter, 4” Flange x 5”L x 4.5” Air Filter, 4” Flange x 7”L x 5.38” Air Filter, 4” Flange x 7.63”L x 5.38”

Carburetor Enclosures 8M205-012 8M205-018 8M205-020 8M205-028 8M205-030 8M205-038 8M205-050 8M205-058

38 1

TEXT VORTECH SUPERCHARGER SYSTEMS

APPLICATIONS GUIDE TEXT

1996-2007

CHEVROLET, GMC & CADILLAC TRUCK & SUV

VEHICLE MODEL(S) PART NUMBER

YEAR(S)

SYSTEM DESCRIPTION

STOCK (HP/TQ)

VORTECH (HP/TQ)

BOOST (PSIG)

FUEL MGMT

CARB E.O.

Chevrolet Full Size Truck / SUV 4.8L, 5.3L, 5.7L, 6.0L GM Vortec V8 4GM218-050SQ

1996-2000

5.7L V-2 SQ S-Trim Standard

250/335

359/410

6-7

1,3

D-213-25

4GL218-010SQ

2002

4.8L V-2 SQ SC-Trim Standard

275/290

352/377

1,2,6

D-213-25

4GL218-050SQ

2003

4.8L V-2 SQ SC-Trim Standard

275/290

352/377

2,6

D-213-25

4GL218-120SQ

2004

4.8L V-2 SQ SC-Trim Standard

285/290

362/377

2,6

D-213-25

4GL218-030SQ

1999

5.3L V-2 SQ SC-Trim Standard

270/315

362/387

1,2,6

D-213-25

4GL218-010SQ

2000-2002

5.3L V-2 SQ SC-Trim Standard

285/325

375/406

1,2,6

D-213-25

4GL218-050SQ

2003

5.3L V-2 SQ SC-Trim Standard

285/325

375/406

1,2,6

D-213-25

4GL218-120SQ

2004

5.3L V-2 SQ SC-Trim Standard

285/325

375/406

1,2,6

D-213-25

4GL218-120SQ

2005-2006

5.3L V-2 SQ SC-Trim Standard

295/335

385/415

1,2,6

D-213-25

4GL218-010SQ

2000

6.0L V-2 SQ SC-Trim Standard

300/360

391/420

7.5

1,2,6

D-213-25

4GL218-040SQ

2001-2002

6.0L V-2 SQ SC-Trim Standard

300/360

415/447

7.5

1,2,6

D-213-25

4GL218-020SQ

2003

6.0L V-2 SQ SC-Trim Standard

300/360

415/447

7.5

1,2,6

D-213-25

4GL218-160SQ

2004

6.0L V-2 SQ SC-Trim Standard

300/360

415/447

7.5

1,2,6

D-213-25

Cadillac Escalade 6.0L GM Vortec V8 / Chevrolet Silverado SS 6.0L GM Vortec V8 (2003-2004) 4GL218-060SQ

2002

V-2 SQ S-Trim High-Output

345/380

465/494

7-8

1,2,6

D-213-25

4GL218-080SQ

2003

V-2 SQ S-Trim High-Output

345/380

465/494

7-8

1,2,6

D-213-25

4GL218-130SQ

2004

V-2 SQ S-Trim High-Output

345/380

465/494

7-8

1,2,6

D-213-25

GMC Yukon Denali 6.0L GM Vortec V8 4GL218-060SQ

2001-2002

V-2 SQ S-Trim High-Output

320/365

440/475

7-8

1,2,6

D-213-25

4GL218-140SQ

2004, 2006

V-2 SQ S-Trim High-Output

345/380

465/494

7-8

1,2,6

D-213-25

Hummer H2 6.0L GM Vortec V8 4GL218-070SQ

2003

V-2 SQ S-Trim High-Output

316/360

436/465

7-8

1,2,6

D-213-25

4GL218-090SQ

2004

V-2 SQ S-Trim High-Output

316/360

436/465

7-8

1,2,6

D-213-25

4GL218-150SQ

2005-2007

V-2 SQ S-Trim High-Output

316/360

436/465

7-8

1,2,6

D-213-25

Fuel Mgmt - 1. High-flow fuel pump, 2. High-capacity fuel injectors, 3. Fuel management unit (FMU), 4. High-flow MAF, 5. ECM chip or module, 6. ECM re-programmer, 7. Timing controller

Supercharged horsepower and torque data shown is a calculated estimate based on percentage increases from actual rear wheel hp/tq measurements.

Most systems are available with polished finish components. The part numbers listed above are for satin finish. Replace “0” with an “8” in the last digit position of the part number, e.g. -010 for satin and -018 for polished.

2003-2007 HUMMER

» 1999-2006 4.8, 5.3, 6.0L GM Vortec V8 V-2 SQ SC-Trim Standard

» 1996-2000 Chevrolet 5.7L GM Vortec V8 V-2 SQ S-Trim Standard

39 2

40 1

TEXT VORTECH SUPERCHARGER SYSTEMS

APPLICATIONS GUIDE TEXT

1994-2007

IMPORT TUNER & TRUCK

Nissan 350Z / Infiniti G35 Coupe automatic transmission compatibility: The systems listed to the right will bolt-on, however, the transmission may need to be in manual shift mode to avoid engaging the rev limiter.

VEHICLE MODEL(S) PART NUMBER

YEAR(S)

SYSTEM DESCRIPTION

STOCK (HP/TQ)

VORTECH (HP/TQ)

BOOST (PSIG)

FUEL MGMT

CARB E.O.

Nissan 350Z (manual transmission) 4NZ218-010SQ

2003-2004

V-2 SQ SC-Trim High-Output

287/274

412/355

1,3,7

D-213-25

4NZ218-050SQ

2005

V-2 SQ SC-Trim High-Output

287/274

412/355

1,3,7

D-213-25

4NZ218-060SQ

2006

V-2 SQ SC-Trim High-Output

300/260

440/352

1,3,7

D-213-25

Infiniti G35 Coupe / Sedan 4NZ218-030SQ

2003

V-2 SQ SC-Trim High-Output

280/270

404/350

1,3,7

D-213-25

4NZ218-020SQ

2004

V-2 SQ SC-Trim High-Output

280/270

404/350

1,3,7

D-213-25

4NZ218-050SQ

2005

V-2 SQ SC-Trim High-Output (Coupe A/T)

280/270

404/350

1,3,7

D-213-25

4NZ218-060SQ

2005

V-2 SQ SC-Trim High-Output (6-SPD)

298/260

440/352

1,3,7

D-213-25

Honda Civic SI 1.6L DOHC 4HC218-010SQ

1999-2000

V-5 SQ G-Trim Standard

160/111

218/142

1,3

D-213-25

4HC218-020SQ

1999-2000

V-5 SQ G-Trim High-Output

160/111

277/175

8-9

1,3

D-213-25

Honda S2000 2.0L/2.2L DOHC 4HS218-010SQ

2000-2003

V-2 SQ SC-Trim High-Output

240/153

358/214

7-8

1,3,7

D-213-25

4HS218-020SQ

2004

V-2 SQ SC-Trim High-Output

240/162

358/219

7-7.5

1,3,7,8

D-213-25

4HS218-040SQ

2005

V-2 SQ SC-Trim High-Output

240/162

358/219

7-7.5

1,3,7,8

D-213-25

Acura Integra GSR 1.8L DOHC 4HC218-030SQ

1994-2001

V-5 SQ G-Trim Standard

170/128

243/168

1,2,3

D-213-25

4HC218-040SQ

1994-2001

V-5 SQ G-Trim High-Output

170/128

278/192

8-9

1,2,3

D-213-25

Acura Integra LS / RS / GS 1.8L DOHC 4HC218-060SQ

1996-2001

V-5 SQ G-Trim Standard

140/124

201/158

1,2,3

D-213-25

4HC218-070SQ

1996-2001

V-5 SQ G-Trim High-Output

140/124

226/184

8-9

1,2,3

D-213-25

Acura Integra Type R 1.8L DOHC 4HC218-090SQ

1997-2001

V-5 SQ G-Trim High-Output

195/130

298/195

7-8

1,2,3

D-213-25

4LA218-020SQ

2001

V-5 SQ F-Trim High-Output

215/218

305/272

7-8

1,3,7

N.A.

4LA218-010SQ

2002-2003

V-5 SQ F-Trim High-Output

215/218

305/272

7-8

1,3,7

N.A.

V-2 SQ SC-Trim High-Output

305/385

420/465

1,2,7

D-213-25

Lexus IS300*

Nissan Titan 5.6L V8** 4NT218-010SQ

2006

Fuel Mgmt - 1. High-flow fuel pump, 2. High-capacity fuel injectors, 3. Fuel management unit (FMU), 4. High-flow MAF, 5. ECM chip or module, 6. ECM re-programmer, 7. Timing controller, 8. Supplemental fuel injector

“We chose the (Vortech) supercharger to be able to have a car that is extremely predictable for the driver. Where you can go out and give 110%, and know that the system and the car is going to give 110% back to you.”

Most systems are available with polished finish components. The part numbers listed above are for satin finish systems. Replace “0” with an “8” in the last digit position of the part number, e.g. -010 for satin and -018 for polished. *Due to variances in IS300 vehicles, systems were developed with a universal fuel and ignition timing calibration. For optimum output an independent tuning specialist will be required for calibration.

-Blake Fuller, Manager & Driver, Braille Auto Racing/Development

» 1999-2000 Honda Civic Si 1.6L 1994-2001 Acura Integra 1.8L V-5 SQ G-Trim High-Output

**Under severe service use, i.e. when the vehicle is repeatedly accelerated and decelerated in a short period of time, an aftermarket high-performance (heavy-duty) catalytic converter may be necessary, not supplied by Vortech.

241

42 1

TEXT VORTECH RACING PRODUCTS & ACCESSORIES

VORTECH RACING PRODUCTS & ACCESSORIES TEXT

CHARGE COOLING In the early 1990s, Vortech performed exhaustive studies on air-to-air charge cooling for use with centrifugal superchargers. The approach seemed attractive given the simplicity and straight-forward application. In each test case study, however, a net loss in boost pressure and horsepower resulted. Since horsepower is strongly dependent on charge-air density, and density in turn is related to both temperature and pressure1, Vortech quickly learned that obtaining good thermal performance from a charge cooler is only half of the challenge. Indeed, the problem with air-to-air cooling was found to be the significant pressure losses associated with long duct runs needed to get the charge air to and from the heat exchanger, which is usually placed up-front, ahead of the radiator. In addition, the air-to-air heat exchanger design incorporated rather lengthy, restrictive passageways which only compounded the problem.

8N301-050

Vortech shelved the idea temporarily and instead focused development efforts on supercharger efficiency, which yields the double benefit of delivering cooler charge air to begin with and a reduction in required drive horsepower, given any specific flow/pressure operating point. As higher compression engines and increased boost levels became more prevalent, Vortech renewed development efforts on highperformance charge cooling systems. Realizing that boost loss was just as important as thermal performance, Vortech turned to an air-to-water type system. This type of system clearly proved its worth. Thermal performance was excellent and it exhibited insignificant frictional (boost) losses which means that for any specific manifold pressure, supercharger drive power would be minimized–a win-win situation. Further, the system would, under most conditions, outperform an air-to-air system.

8M201-005

IGLOO MONDO COOLER®

Today, what Vortech started years ago is becoming the technology of choice within the OE automotive industry. Liquid-air charge cooling can now be seen on some of the most advanced powertrains from Mercedes Benz (Maybach), Ford (SVT/Harley Davidson F-150, 2003 Cobra, et al.), and Jaguar for boosted applications. 1

Basic law for gas density: ρ= P/RT

Vortech’s Maxflow Power Cooler is the aftermarket’s first street/strip, air-to-water charge cooler system. It utilizes a closed-loop water circulation system with a front mounted heat exchanger that allows for effective street operation. Power gains up to 100 horsepower are possible depending on the application, engine, and boost level. This system provides cooler, denser air charges (discharge temperature decrease is approximately 100°F@10 PSIG), allowing more timing with less fuel required. (Greater air discharge temperature reductions are possible with higher boost levels and/or the use of ice chilled water in the reservoir).

VORTECH MAXIMUM COOLING ADVANTAGE » Achieves over 80% effectiveness. » More horsepower is achieved per supercharger PSI of boost. » The compact charge cooler is positioned “in-the-run.” Short and » Supercharger boost and parasitic drive direct ducting absolutely minimizes frictional losses (boost loss).

» Consistently cools the liquid system, even when not in boost, for charge cooling on demand.

power does not have to be increased to overcome boost loss; supercharger will be making less heat in the first place and consume less power doing it.

Each system features our exclusive dual pass, high-flow, air-to-water-to-air cooler unit. The front mounted heat exchanger (cooler radiator) uses a low-restriction plate/fin design and is manufactured from high-grade aluminum. The water reservoir is roto-molded of high-strength plastic polymers for durability. Also included is a heavy-duty water pump, mounting brackets, hoses and hardware.

» Ice water provision for competition.

performance. As such, typical effectiveness values of 70-85% + are routinely measured. Having liquid on the cold side of the exchanger results in several very important advantages. First, water is 23 times more conductive than air, so, the overall heat transfer coefficient is dramatically improved–many times per unit fin area over air-to-air. This affords a much more compact heat exchanger design. Secondly, the pressure loss on the air passage side is greatly reduced by the reduction in heat exchanger size and by the “open” fin area design. Compactness allows the cooler

8M201-004 8M201-005 8M201-006 8M201-007 8M201-008 8M002-061

Truck (Ford 5.0L) GT-40 (Ford 5.0L) Universal TFS-R (Ford 5.0L) Carburetor Flange Carb Flange Manifold (Base Only)

WATER TANK UPGRADE Upgrade to a high-capacity water tank. 8N105-110* 2003-2004 Ford Mustang Cobra 8N105-120* 2005-2008 Ford Mustang GT/V6

A reservoir which features an easy fill, wide mouth design for the use of water, ice or a combination of both is included with 1986-2004 Ford Mustang V8 systems and is optional on 2005 to 2008 Mustang systems. Individual Power Cooler cores with welded end tanks plus multiple intake and discharge ducting options are available through special order.

THE SCIENCE BEHIND VORTECH CHARGE COOLING SYSTEMS Effectiveness is a term often seen, but also often misused. Strictly speaking, effectiveness refers to the steady state thermal performance of a heat exchanger, and is highly influenced by the flow rates on both the hot and cold side. Numerically, it is stated as a percentage and refers to how close the discharging hot air temperature is to the incoming cooling (fluid) temperature. Thus, it can only be evaluated under fully stabilized, steady state conditions where the hot and cold side flowrates are carefully controlled and monitored. Vortech tests their charge coolers exactly in this manner to determine legitimate effectiveness

MAXFLOW POWER COOLER® CHARGE COOLER SYSTEMS

Innovative modular design for universal use or with the Ford 5.0L EFI lower manifold types including the 5.0L Truck, SVO 5.0L or 5.8L GT-40 and TFS-R. This system allows ice-chilled water to drastically reduce the charge air temperature entering the engine. It features a triple core double pass internal configuration for superior cooling along with minimal pressure drop, resulting in substantial increases in usable horsepower and torque. Capable of flowing in excess of 2,500 CFM for applications producing 1,700+ HP. Patent Pending.

to be placed directly “in the run” from supercharger to engine–little to no increase in ducting length occurs so ducting losses are absolutely minimized, meaning charge density is maximized. Having a reservoir of cool liquid on-hand takes advantage of available thermal mass or storage of the coolant itself, i.e., the vast majority of boost/power demands are typically of short duration, resulting in very little overall temperature rise of the coolant itself. As the coolant is continuously circulated, cooled and stored “at the ready” at close to ambient temperatures, the charge cooler is always afforded Maximum Cooling Advantage™.

8N301-010* 1986-1993 Ford Mustang 5.0L 8N301-030* 1996-2004 Ford Mustang GT 4.6L 8N301-060* 1996-2004 Ford Mustang GT and Bullitt with Bullitt Intake Manifold 8N301-040* 1996-1998 Ford Cobra 4.6L 4V 8N301-050* 1999-2001 Ford Cobra 4.6L 4V 8N301-050* 2003-2004 Ford Mustang Mach 1 8N301-290 2005-2006 Ford Mustang GT 4.6L 3V 8N301-320 2005-2006 Ford Mustang V6 8N301-330 2007-2008 Ford Mustang GT 8N301-340 2007 Ford Mustang V6

8N301-300 1997-2003 Ford F-150 5.4L 8N301-130 1999-2004 Ford S.D. 6.8L V10 8N301-190 1999-2007 GM Truck 4.8/5.3/6.0L (Optional on 2005-2007) 8N301-020 1993-1997 LT1 GM F-body 8N301-070 1998-2000 LS1 GM F-body 8N301-110 2001-2002 LS1 GM F-body 8N301-100 1999-2000 Honda Civic Si 1.6L 8N301-170 1994-2001 Acura Integra GS-R 1.8L 8N301-180 1994-2001 Acura Integra LS 1.8L

Please Note: Asterisk (*) part numbers on this page require the battery relocation kit 8N150-010. 8N301-190 requires custom tuning (not included). 8N301-290 requires a re-flash of the ECM. 8N301-300 requires a pulley change (supercharger with pulley will need to be sent to Vortech) call for details.

BATTERY RELOCATION KIT High quality battery relocation kit required with some charge cooling systems. 8N150-010

Battery Relocation Kit

43 2

44 1

VORTECH RACING PRODUCTS & ACCESSORIES TEXT

TEXT VORTECH RACING PRODUCTS & ACCESSORIES

BYPASS & BLOW-OFF VALVES Vortech Maxflow Bypass/Blow-off Valves improve supercharger operations by opening to relieve unwanted pressure during deceleration. This reduces heat build-up and eliminates compressor surge. These units feature a “rolling diaphragm” design which provides ultraquick valve response along with unmatched durability.

8D205-003

MAXFLOW BV57 BYPASS VALVES The new billet aluminum BV57 Bypass Valve flows 1300 CFM@10 PSIG. It features a large rolling diaphragm configuration with –4 AN signal hose connection and dual filtered vents that allow for quick valve response. The valve head attachment method provides valve articulation for perfect sealing to the mechanically retained valve seal. It also features adjustable spring preload and reconfigurable signal input locations. It can be mounted in any position and is adaptable to all types of boosted engine installations. This valve is designed for use in speed density configured applications only (non-mass air equipped). Assembly includes V-band mounting clamp and sealing O-ring.

FUEL COMPONENTS Fuel is perhaps the most critical of all the support systems required to produce power and engine reliability in a supercharged engine. Vortech takes great care to ensure every system delivers a correct air-to-fuel ratio through all phases of operation. The testing and development of various systems have led Vortech to produce several components that work well on the vast majority of today’s production vehicles. If you are working on an electronically fuel-injected supercharged or turbocharged system, import or domestic, Vortech can offer you components that work simply and are cost effective. 8B002-001

8F101-600

NOTE: Requires 8D005-051/-052/-053 flange upon intitial installation. 8D205-003 8D205-008

Maxflow bv57 Clear Anodized Maxflow bv57 Polished

8D005-051 8D005-052 8D005-053

Weld-on Flange, Aluminum Weld-on Flange, Steel Adapter Flange, ATI Race Valve, Bolt-on

MAXFLOW MONDO BYPASS VALVES High-flow Mondo Valves (550+ CFM@10 PSIG) are recommended for applications creating more than 12 PSIG and are mandatory for any system using a cog drive belt. These units can be adaptable to all types of supercharged and turbocharged installations, mounted at any angle. The outlet mates to a 2” hose. Other features include anodized aluminum valve head with O-ring seal, a shaft configuration that allows valve head articulation for perfect sealing, and an improved dual vent design. A large signal hose connection provides for fast valve action. An installation gasket is included. 8D103-001 8D103-008

Mondo Bypass Valve, Satin Mondo Bypass Valve, Polished

8D003-051 8D003-052 8D003-053

Weld-on Flange, Steel Weld-on Flange, Aluminum Replacement Flange Gasket

MAXFLOW RACING BYPASS & BLOW-OFF VALVES

GAUGES

Maxflow Racing Bypass Valve 8D204-001 Blue/Satin 8D204-003 Blue/Polished 8D204-005 Red/Polished 8D204-006 Black/Polished 8D204-007 Purple/Polished 8D204-008 Polished/Polished 8D204-010 Black/Satin

Maxflow Racing Blow-off Valve 8D204-011 Blue/Satin 8D204-013 Blue/Polished 8D204-015 Red/Polished 8D204-017 Purple/Polished 8D204-018 Polished/Polished 8D204-020 Black/Satin

8D204-001

Specifically designed for street applications. Eliminates compressor surge and reduces heat soak in the discharge tube. Recommended for vehicles running 6 to 12 PSIG. Both inlet and outlet mate to a 1” hose. 8D001-001

Standard Bypass Valve, Bosch

MAXFLOW RENEGADE FUEL SYSTEMS The Vortech Maxflow 1986-1993 Ford Mustang 5.0L Fuel System with dual T-Rex fuel pumps can supply up to 90 GPH@45 PSIG, enough fuel to support up to 1000 hp at .50 BSFC. Vortech T-Rex fuel pumps provide unequaled street reliability and can produce up to 100 PSIG with high fuel flow. Our dual pump configuration is lighter and allows for better packaging on the vehicle due to its low-profile (it does not hang down below the bumper as with others). These complete systems include a high-flow in-tank fuel pickup, billet highflow fuel filter, 1/2 inch I.D. dual feed billet fuel rails with AN-style O-ring fittings and all necessary installation hardware. All hoses, hose ends and fittings are NHRA legal. Available in braided stainless or push lock and with a single pump (for those racers who are already using a Vortech T-Rex fuel pump). Recommended for 500+ horsepower engines.

Weld-on Mounting Flange 8D004-051 Steel 8D004-052 Aluminum 8D004-053 Flange Gasket

STANDARD BYPASS VALVE

Vortech boost and fuel pressure gauges feature full sweep, white-on-black 2 1/16” dials. These race quality gauges are a must for monitoring engine functions. Assemblies include heavy gauge wiring, vacuum line, NPT fittings and mounting hardware.

8D103-001

Our Maxflow Racing Bypass/Blow-off Valve flows 320 CFM@8 PSIG and features a compact design that is ideal for imports and others with tight engine compartments. These units will retrofit to standard HKS/Greddy style mounting pads and out performs anything its size. Bypass valve is preset to open at four to five inches of vacuum and Blow-off valve is preset to open at 10 to 11 inches of vacuum. Installation gasket is included. The outlet mates to a 1.75” hose.

8D001-001

45 2

8F101-600 8F101-610 8F101-620 8F101-630

Maxflow Renegade Fuel System, Dual Pump, Push Lock Hose Maxflow Renegade Fuel System, Dual Pump, Braided Hose Maxflow Renegade Fuel System, Single Pump, Push Lock Hose Maxflow Renegade Fuel System, Single Pump, Braided Hose

8B002-000 Mechanical Boost Gauge, 0-30 Inches of Vacuum, 20 PSI 8B002-001 Mechanical Boost Gauge Assembly w/8B002-000 Gauge, Hose and Fittings 8B101-001 Mechanical Boost Gauge Assembly w/8B002-000 Gauge and 8B001-001 Pillar Mount for 1986-1993 Ford Mustang 5.0L 8B001-001 Single Pillar Gauge Mount for 1986-1993 Ford Mustang 5.0L 8B001-002 Dual Pillar Gauge Mount for 1986-1993 Ford Mustang 5.0L 8B103-010 Electric Fuel Pressure Gauge Assembly, 0-100 PSI with Electronic Controller 8B103-002 Electric Fuel Pressure Gauge Assembly with 8B103-010 Gauge and 8B001-001 Pillar Mount for 1986-1993 Ford Mustang 5.0L

46 1

VORTECH RACING PRODUCTS & ACCESSORIES TEXT

TEXT VORTECH RACING PRODUCTS & ACCESSORIES

FUEL COMPONENTS

SUPER FUEL MANAGEMENT UNITS

8F201-265

Vortech’s Super Fuel Management Unit (Super FMU) is a tuner’s dream. It permits complete tailoring of the fuel pressure curve relative to manifold pressure, including upper and lower limits. The Super FMU can be used in a series or as a stand alone component. Its super high-flow capacity can handle large single and dual pumps while fluctuation and pressure creep is eliminated. The unit can also be used to adjust static pressure. Features include four pre-calibrated gain ratios: 7:1, 5:1, 3.25:1 and 2.5:1. Easily replaces our standard non-adjustable FMU. 6X100-001 6X100-002 6X100-003 6X070-040

Super FMU, -6 AN Inlet/Outlet Super FMU Adapter Assembly (Allows the use of Standard Vortech #4 SAE FMU Hoses) Super FMU Support Hardware Assembly Adapter Ring, Low-gain Ratio (Use with 6Z170-010 or 6Z170-015 for 1:1–2:1 Gain)

STANDARD FUEL MANAGEMENT UNITS

6X100-001

6Z110-111

VORTECH FUEL PUMPS Vortech fuel pumps are designed for various applications. To select the pump that best suits your needs, you must first determine the flow requirements and at what pressure this demand must be met. Remember: As fuel pressure requirements rise, fuel flow drops. Flow demands are also elevated by the increase in horsepower. The 8F001-500 fuel pump is specially designed to maintain a high-flow rate at elevated pressures, hence the 40 GPH at 90 PSIG designation. It’s available separately or as a complete kit including wires, relay, hoses, fittings and template.

The 12:1 FMU is standard in many Vortech systems. It is suitable for most applications running with original equipment injectors to maintain an air-to-fuel ratio of approximately 10.8 to 11.5:1 under boost. The pump utilized needs to provide sufficient flow to deliver the fuel pressure required in proportion to boost.

6Z110-130 6Z110-111 6Z110-112 6Z110-114 6Z110-136 6Z110-113 6Z110-115 6Z110-125 6Z120-010

FMU, 12:1, 1/4” Barb Fittings FMU, 12:1, #4 SAE Fittings FMU, 10:1, #4 SAE Fittings FMU, 8:1, #4 SAE Fittings FMU, 7:1, #4 SAE Fittings FMU, 6:1, #4 SAE Fittings FMU, 4:1, #4 SAE Fittings FMU, 3:1, #4 SAE Fittings Air Bleed Valve

Recalibration Kits 6Z170-030* 12:1, (19 lb/hr Injectors) 6Z170-040* 10:1, (24 lb/hr Injectors) 6Z170-020* 8:1, (24 lb/hr Injectors) 6Z170-060 7:1 6Z170-010* 6:1, (30, 36 or 38 lb/hr Injectors) 6Z170-015* 4:1, (38 or 42 lb/hr Injectors) 6Z170-050 3:1 6Z270-010 12:1, 10:1, 8:1, 7:1, 6:1, 4:1

8F002-265

8F001-002

The Vortech Standard Fuel Management Unit (FMU) is designed for use on multi-point electronic fuel injected engines. It is a secondary fuel regulator that installs in series with a stock regulator on the return line to the tank. The unit increases fuel pressure in proportion to boost pressure (this assumes the pump being utilized is of sufficient pressure and flow to deliver the fuel required). All Vortech FMUs feature CNC machined, 6061-T6 aluminum construction and a blue anodized finish.

The 10:1, 8:1 and 7:1 FMUs are for Vortech applications that require less fuel pressure to maintain safe air-to-fuel ratios. The 6:1, 4:1 and 3:1 FMUs were designed for high-output custom applications where larger than stock injectors have been employed. For example, the 6:1 FMU can be used on Mustangs using either 30, 36 or 38 lbs. per-hour injectors. The 4:1 unit was designed for either 38 or 42 lbs. per-hour injectors in the same application. Vortech FMU Recalibration Kits include a new ring, washer and fluorosilicone diaphragm.

47 2

8F001-002 8F001-500 8F001-255 8F001-265 8F001-305 Note: *Recommended for 1986-1998 Ford Mustangs with injectors listed. Technical Tip: When using an FMU with larger injectors or for fine tuning when other components that alter airflow are being used, Vortech offers an optional air bleed valve. This permits the rate of gain for any of the Vortech FMUs to be reduced by approximately two pounds of pressure per PSI of boost. It allows a 12:1 FMU to perform as a 10:1 unit. To alter the curve even greater, refer to our 8:1, 7:1, 6:1, 4:1 and 3:1 Recalibration Kits.

8F002-265 8F201-265 8F202-265 8F001-068 8F001-342 8F101-262

In-Line Fuel Pump, Universal, 1/2” Inlet, 5/16” Outlet In-Line Fuel Pump, Universal, 5/8” Inlet Barb, High-Flow, Rubber Encased, 40GPH@90PSIG In-Tank Fuel Pump, 255 LPH, 1986-1997 Ford Mustang 5.0/4.6L In-Tank Fuel Pump, 255 LPH, 1998-2004 Ford Mustang 4.6L, Turbine Style Mechanical Fuel Pump, 130 GPH@13 PSIG (Use with Small Block Chevrolet Supercharging System) T-Rex Fuel Pump, 50 GPH@70 PSIG, 5/16” x 90° Outlet T-Rex Fuel Pump Kit, 50 GPH@70 PSIG, 1986-1993 Ford Mustang 5.0L T-Rex Fuel Pump Kit, 50 GPH@70 PSIG, 1994-1998 Ford Mustang 5.0/4.6L In-Line Fuel Pump, 68 GPH@60 PSIG, Nissan 350Z / Infiniti G35 In-Tank Fuel Pump, 58 GPH@90 PSIG, Honda / Acura In-Tank Fuel Pump Assembly, 255 LPH, 2005-2008 Ford Mustang GT

VORTECH FUEL PUMP ACCESSORIES 8F010-010 8F011-026 8F011-029 8F101-200 7F012-001 7P250-140 7P312-015 7P312-017 7P375-011 7P375-012 7P500-010 7P625-312 7P625-375

In-Tank Fuel Pickup, High-Flow (Replaces Stock Pump Assembly) #10 Feed #6 Return, Ford Mustang 5.0L 3/8” NPT x 1/4” NPT Y-Block, Anodized Billet Aluminum 1/2” NPT x 3/8” NPT Y-Block, Billet Aluminum T-Rex Wiring Assembly, w/Bosch Relay & Connectors, Ford Mustang M12 Cap Hex Nut, Fuel Pump (Fits 8F001-500/8F002-265) Banjo Fitting, -6 JIC Flare x 12mm (Fits 8F001-500/8F002-265) Banjo Fitting, 5/16” Hose Barb x 12mm (Fits 8F001-500/8F002-265) M10 x 1.0 to 5/16” Barb (Fits 8F001-002/8F001-500) M10 x 1.0 to –6 JIC Flare (Fits 8F001-002/8F001-500) Fitting, 3/8” Barb to M10 x 1.0 M10 x 1.0 to 1/2” Barb (Fits 8F001-002/8F001-500) 5/8” to 5/16” Barb Reducer, Brass 5/8” to 3/8” Barb Reducer, Brass

8F001-255

8F001-500

» Visit our website for Vortech fuel pump performance graphs!

48 1

VORTECH RACING PRODUCTS & ACCESSORIES TEXT

TEXT VORTECH RACING PRODUCTS & ACCESSORIES

FUEL COMPONENTS

49 2

FUEL COMPONENTS 8F130-031

FUEL PRESSURE OPTIMIZERS Vortech billet aluminum Maxflow fuel pressure optimizer attaches to the factory fuel pressure regulator and permits adjustment from 25 to 70 PSIG. It allows the user to properly tune the air-to-fuel ratio on stock or modified engines. 8F130-031 8F130-013 8F130-015 8F130-017 8F130-018

Fuel Pressure Optimizer / 1986-1995 Ford Mustang 5.0L / Blue Fuel Pressure Optimizer / 1988-2000 Honda/Acura 1.6L&1.8L / Blue Fuel Pressure Optimizer / 1988-2000 Honda/Acura 1.6L&1.8L / Red Fuel Pressure Optimizer / 1988-2000 Honda/Acura 1.6L&1.8L / Purple Fuel Pressure Optimizer / 1988-2000 Honda/Acura 1.6L&1.8L / Polished

Ford Mustang 5.0L (1986-1993) 8F103-021

Fuel Rail / Blue

FUEL REGULATOR ADAPTER This adapter allows stock 1986-1993 Ford Mustang 5.0L-type regulators to be used with high-flow fuel rails. It is CNC machined from billet aluminum, blue anodized and includes O-rings plus -6 AN fittings. 8F111-023

Fuel Regulator Adapter, 1986-1993 Ford Mustang 5.0L

8F002-004

8F002-005

MAXFLOW FUEL RAILS

FUEL INJECTORS

Designed to meet the needs of both street and racing EFI engines, Vortech’s 1/2” I.D. high-flow fuel rails provide the correct flow rate to the injectors. Extruded from aircraft quality aluminum, then CNC machined, each rail is anodized for appearance and improved corrosion resistance. Included are AN fittings, O-rings and all necessary mounting hardware. All Honda/Acura Fuel Rails include all fittings, brackets, adapters and hardware necessary to connect to factory fuel lines or aftermarket “AN” style fittings.

A consistent fuel supply results in maximum power for optimum performance. Vortech high-impedence fuel injectors ensure balanced fuel delivery to each cylinder.

Note: A threaded O-ring plug is used, instead of welding, to maintain distributor clearance on the driver’s side (Mustang system).

8F060-024 8F060-030 8F060-038 8F060-048 8F060-042 8F060-050 8F060-055 8F060-066

Honda/Acura 1.6L SOHC (1992-1995) 8F103-043 8F203-043 8F103-045 8F203-045 8F103-047 8F203-047 8F103-048 8F203-048

Fuel Rail / Blue Fuel Rail w/Optimizer / Blue Fuel Rail / Red Fuel Rail w/Optimizer / Red Fuel Rail / Purple Fuel Rail w/Optimizer / Purple Fuel Rail / Polished Fuel Rail w/Optimizer / Polished

Honda/Acura 1.6L SOHC (1996-2000)

EFI FUEL PRESSURE REGULATORS

HIGH-FLOW FUEL FILTERS

Vortech fuel pressure regulators feature an adjustment range of approximately 25-80 PSIG. Each unit is manufactured using 6061 T-6 billet aluminum and has a blue anodized finish. A vacuum/pressure port allows for a 1:1 gain when used in boosted applications.

Our machined fuel filters are made from 6061 T-6 billet aluminum and feature a blue anodized finish. They are designed to meet the flow demands of 1500+horsepower racing engines. Filters are available with a standard paper element or a lifetime, washable 35 micron stainless steel element. Both contain all necessary mounting hardware and are machined for -10 AN fittings. -AN reducers can be used for -8 to -4 systems.

8F002-004 8F002-005 8F002-006

Fuel Regulator, Dual -10 ORB Inlet and a Single -6 ORB Return, Universal Fuel Regulator, 1986-1993 Ford Mustang, Direct Replacement Fuel Regulator, 1994-1997 Ford Mustang, Direct Replacement

8F102-002 8F102-003 8H040-065

Fuel Filter w/ S/S Element Fuel Filter w/ Paper Element Replacement Paper Element

8F103-053 8F203-053 8F103-055 8F203-055 8F103-057 8F203-057 8F103-058 8F203-058

Fuel Rail / Blue Fuel Rail w/Optimizer / Blue Fuel Rail / Red Fuel Rail w/Optimizer / Red Fuel Rail / Purple Fuel Rail w/Optimizer / Purple Fuel Rail / Polished Fuel Rail w/Optimizer / Polished

Honda/Acura 1.6L/1.8L DOHC (1994-2001) 8F103-063 8F203-063 8F103-065 8F203-065 8F103-067 8F203-067 8F103-068 8F203-068

Fuel Rail / Blue Fuel Rail w/Optimizer / Blue Fuel Rail / Red Fuel Rail w/Optimizer / Red Fuel Rail / Purple Fuel Rail w/Optimizer / Purple Fuel Rail / Polished Fuel Rail w/Optimizer / Polished

Honda/Acura 2.2L H22 (1992-2000) 8F103-073 8F203-073 8F103-075 8F203-075 8F103-077 8F203-077 8F103-078 8F203-078

Fuel Rail / Blue Fuel Rail w/Optimizer / Blue Fuel Rail / Red Fuel Rail w/Optimizer / Red Fuel Rail / Purple Fuel Rail w/Optimizer / Purple Fuel Rail / Polished Fuel Rail w/Optimizer / Polished

8F060-005

8F060-310 8F160-024 8F160-030 8F160-038 8F160-042

Fuel Injector, 43 lbs, GM Late Model Truck, High-Flow Fuel Injector, 24 lbs, Bosch Fuel Injector, 30 lbs, Bosch Fuel Injector, 38 lbs, Lucas Fuel Injector, 39 lbs, EV6 Fuel Injector, 42 lbs, Bosch Fuel Injector, 50 lbs, Rochester Fuel Injector, 55 lbs, Siemens Fuel Injector, 66 lbs, GM ‘Short Body’ Fuel Injector, 310 cc, Honda Fuel Injector, 24 lbs, Set of 8 Fuel Injector, 30 lbs, Set of 8 Fuel Injector, 38 lbs, Set of 8 Fuel Injector, 42 lbs, Set of 8

50 1

VORTECH RACING PRODUCTS & ACCESSORIES TEXT

TEXT VORTECH RACING PRODUCTS & ACCESSORIES

1986-1993 MUSTANG 5.0L 8C001-003

4FP110-010

1986-1993 MUSTANG 5.0L SUPERCHARGER MOUNTING COMPONENTS 4FA010-044 4FA010-045 4FA015-015 4FA100-001 4FA100-005 4FA111-021 4FA111-071 4FA111-081

4FA111-021

Supercharger Mounting Plate 5/16” Steel, Nickel Plated S.H.O. 1/2” Billet Aluminum Supercharger Mounting Plate Alternator Stay, Zinc Support Hardware Assembly, w/o Mounting Bracket/Plate Supercharger Mounting Plate Upgrade Assembly, 1/2” Billet Aluminum Mounting Bracket Assembly Renegade Supercharger Mounting Bracket Assembly, Twin Plate, Idler w/Flanges, Aluminum, Driver Side Renegade Supercharger Mounting Bracket Assembly, Twin Plate, Idler w/Flanges, Aluminum, Passenger Side

RACE STRUT ASSEMBLY

RACE MOUNTING ASSEMBLY Race Mounting assemblies include everything you’ll need to mount a Vortech supercharger. These configurations include a high-strength cast aluminum mounting bracket, race mounting plate, discharge tube, standard bypass valve assembly (except 4FP218-010), idler, radiator pipe, oil feed/drain assembly and all necessary hardware. 8C001-003 8C001-004 8C001-007 4FP218-010

Race Mounting Assembly 1986-1993 Ford Mustang 5.0L, Satin Finish Race Mounting Assembly 1986-1993 Ford Mustang 5.0L, Polished Finish Race Mounting Assembly 1994-1995 Ford Mustang 5.8L 351 c.i. , Satin Finish Race Mounting Assembly 1986-1993 Ford Mustang 5.0L Mondo, (Includes All Parts Listed Below, Use with 4FP110-010)

4FP111-051

Supercharger Mounting Bracket Assembly, Dual Plate w/Idler and Tensioner Discharge Assembly Supercharger Drive Assembly

4FP112-020 4FP116-011

4FP130-011 4FP114-023 4FP118-011

Oil Feed and Drain Assembly Radiator Hose Assembly Alternator Bracket/Water Pump Drive

V-20 SERIES MOUNTING BRACKET ASSEMBLY For mounting V-20 Series supercharger to Ford 302/351W engines equipped with inline valve cylinder heads. Features dual 1/2” billet plate mount configuration, driver-side mount, and includes plate/idler spacers plus all necessary hardware. Requires the use of Vortech strut support or equivalent. 4FP111-091

4FP111-101

Mounting Bracket Assembly, V-20, cog drive, Ford 5.0/5.8L Includes flanged Ø 3.6” idler for use with up to 50mm wide belts Designed for use with 4FP016-041/-051 and 4MA018 series universal crank pulleys and 2G034 series supercharger pulleys » Belt length will be dependent on engine deck height and pulley ratio Mounting Bracket Assembly, V-20, 8-rib drive, Ford 5.0/5.8L (Renegade) » Includes flanged Ø 6.0” idler for use with 8-rib belts » Designed for use with 4FA018-029 crank pulley and 2G038 series supercharger pulleys » Belt length will be dependent on engine deck height and pulley ratio

» »

Our supercharger/crank strut configurations mate the supercharger input shaft with the crankshaft to eliminate any possible mounting plate flex. Another benefit is a significant reduction in crank snout sideloading from the supercharger belt when put into high levels of tension (common with EFI/Renegade applications with an 8-Rib belt). Grade 8 mounting hardware is included. Strut packages are not recommended for sustained highway/ street use.

» Adjustable billet aluminum center support assembly (allows for minor adjustments in deck height and cylinder head deck thickness)

» Billet aluminum bearing housing assemblies with high-rpm, self-aligning bearings for precise alignment

» Billet aluminum upper and lower pilot

DISCHARGE TUBE / ASSEMBLIES 4FA012-030 4FA012-038 4FA112-030 4FA112-038 4FA112-050 4FA112-058

4FA112-030

Standard Discharge Tube, Aluminum, Satin Standard Discharge Tube, Aluminum, Polished H.O. Discharge Tube Assembly, Aluminum, Satin H.O. Discharge Tube Assembly, Aluminum, Polished V-1/V-7 Discharge Tube Assembly, Aluminum, Satin V-1/V-7 Discharge Tube Assembly, Aluminum, Polished

RACE DISCHARGE TUBE / ASSEMBLIES

4FA212-050

4FA012-041 Race Discharge Tube, Aluminum, V-7, S.H.O./Renegade High-Volume, Satin 4FA012-048 Race Discharge Tube, Aluminum, V-7, S.H.O./Renegade High-Volume, Polished Please note: 4FA012-041/048 Machined for Vortech Race and Mondo Bypass Installations.

4FA212-050 4FA212-058 4FA212-060 4FA212-068

Race Assembly w/Vortech Mondo Bypass Valve, Aluminum, Satin, V-1/V-2/V-7 Race Assembly w/Vortech Mondo Bypass Valve, Aluminum, Polished, V-1/V-2/V-7 Race Assembly w/Vortech Race Bypass Valve, Aluminum, Satin, V-1/V-2/V-7 Race Assembly w/Vortech Race Bypass Valve, Aluminum, Polished, V-1/V-2/V-7

adapters allow for a precision fit into Vortech supercharger pulleys 4FA110-020 Renegade Supercharger Support Strut Assembly

(Requires Crank Pulley 4FA018-029)

4FP110-010 Mondo Supercharger Support Strut Assembly (Requires Crank Pulley 4FP118-020)

4FP017-121 Pilot, Upper Crank Support, V-20, 50mm Drive 4FP017-131 Pilot, Upper Crank Support, V-20, 8-Rib Drive 4FP017-141 Pilot, Lower, 70T Crank Pulley Strut Support (use with 4MA0184FP017-151

070)

Pilot, Lower, 75T Crank Pulley Strut Support (use with 4MA018-

075)

4FP017-060 Strut Assy, with end housing assemblies, 13.63” center support length (use on V-20 shortdeck, and V-1/V-4/V-7 tall deck applications)

251

MISC. COMPONENTS 8C101-001 8H140-000 8F101-265 4FD113-010 4FA114-023 7U035-001 4FA130-026 4FA130-036 4PFT012-010 7S400-000 4FA112-060 4FA112-080

High-Output Upgrade System (Used w/Standard System) Mass Air System (Fender Mount) T-Rex Fuel Pump Support Assembly (w/o Fuel Pump) Check Valve Assembly For Speed Density Vehicle Radiator Hose Assembly 3.5” Flex Hose (Priced by the Linear Foot) Oil Feed Assembly Oil Drain Assembly 4” X 3 1/2” X 90° Reducer Elbow, Aluminum 4” X 90° Universal Elbow w/Two Bosses, 3.5” Centerline Radius, Aluminum 4” X 90° Inlet Elbow, 2.0” Bung (Use with Mondo Bypass Valve), Renegade 4” X 90° Inlet Elbow, 1.75” Bung (Use with Race Bypass Valve), S.H.O.

8C101-001

52 1

TEXT VORTECH RACING PRODUCTS & ACCESSORIES

VORTECH RACING PRODUCTS & ACCESSORIES TEXT

CRANK & POWER PULLEYS

PULLEYS SUPERCHARGER PULLEYS

2A031-333

2A031-250 2A031-275 2A031-295 2A031-312 2A031-333 2G038-320 2G038-333

2G038-350 2A038-275 2A038-295 2A038-312 2A038-333 2A038-347 2A038-370 2A038-380 2A037-312 2A036-262 2A036-287 2A036-312 2A036-325 2A036-333 2A036-340 2A036-348 2A036-361 2A036-380 2A036-450 2A036-500

10-Rib Pulley (2.50”) 10-Rib Pulley (2.75”) 10-Rib Pulley (2.95”) 10-Rib Pulley (3.12”) 10-Rib Pulley (3.33”) 8-Rib Pulley (3.20”), V-20 Series Rengade 8-Rib Pulley (3.33”), V-20 Series Rengade 8-Rib Pulley (3.50”), V-20 Series Rengade 8-Rib Pulley (2.75”) 8-Rib Pulley (2.95”) 8-Rib Pulley (3.12”) 8-Rib Pulley (3.33”) 8-Rib Pulley (3.47”) 8-Rib Pulley (3.70”) 8-Rib Pulley (3.80”) 7-Rib Pulley (3.125”) 6-Rib Pulley (2.62”) 6-Rib Pulley (2.87”) 6-Rib Pulley (3.125”) 6-Rib Pulley (3.25”) 6-Rib Pulley (3.33”) 6-Rib Pulley (3.40”) 6-Rib Pulley (3.48”) 6-Rib Pulley (3.60”) 6-Rib Pulley (3.80”) 6-Rib Pulley (4.50”) 6-Rib Pulley (5.00”)

High-Traction Profile 2A038-270 2A038-280 2A038-285 2A038-300 2A038-315

8-Rib Pulley (2.70”) 8-Rib Pulley (2.80”) 8-Rib Pulley (2.85”) 8-Rib Pulley (3.00”) 8-Rib Pulley (3.15”)

Pulley Retainer Assembly 8R101-000 8R101-001 8R101-002 8R101-003 8R101-008 8R101-009

4-Rib w/Bolt, Key & Washer 6-Rib w/Bolt, Key & Washer 8-Rib w/Bolt, Key & Washer 10-Rib w/Bolt, Key & Washer 8-Rib w/Bolt, Key & Washer, V-20 Series Renegade 2.5” Cog w/Bolt, Key & Washer, V-20 Series

1999-2000 Honda / 1994-2001 Acura 2A034-312 2A034-333 2A034-370

4-Rib Pulley (3.12”) 4-Rib Pulley (3.33”) 4-Rib Pulley (3.70”)

*Requires #2G035 -031 Hub, Pulley, Keyed V-20 Series

1986-1993 Ford Mustang 5.0L 4FA016-011 4FA018-021 4FA116-041*

1993-1997 GM LT1 F-Body 4GH038-275 4GH038-295 4GH038-312 4GH038-333

8-Rib Pulley (2.75”) 8-Rib Pulley (2.95”) 8-Rib Pulley (3.12”) 8-Rib Pulley (3.33”)

4FA018-023 4FA116-051*

1998-2002 GM LSI F-Body 4GK038-312 4GK038-370

4FP118-020

8-Rib Pulley (3.12”) 8-Rib Pulley (3.70”)

2A033-028

1997-2004 Corvette/350Z/Infiniti G35 4GR033-028 4GR033-030 4GR033-032 4GR033-034 4GR032-030 4GR032-032

28 Tooth Count 30 Tooth Count 32 Tooth Count 34 Tooth Count 30 Tooth Jackshaft Pulley 32 Tooth Jackshaft Pulley

4FA018-022 4FA116-031*

28 Tooth/50mm 30 Tooth/50mm 32 Tooth/50mm 34 Tooth/50mm 27 Tooth/35mm 28 Tooth/35mm 30 Tooth/35mm 32 Tooth/35mm 32 Tooth GT/2.5” V-20 Series* 34 Tooth GT/2.5” V-20 Series* 36 Tooth GT/2.5” V-20 Series* 38 Tooth GT/2.5” V-20 Series* 40 Tooth GT/2.5” V-20 Series* 44 Tooth GT/2.5” V-20 Series* 46 Tooth GT/2.5” V-20 Series* 28 Tooth GT/ 14mm Pitch* 30 Tooth GT/ 14mm Pitch* 32 Tooth GT/ 14mm Pitch* 34 Tooth GT/ 14mm Pitch* 30 Tooth GT/ 11mm Pitch* 31 Tooth GT/ 11mm Pitch* 32 Tooth GT/ 11mm Pitch* 34 Tooth GT/ 11mm Pitch* 36 Tooth GT/ 11mm Pitch* 38 Tooth GT/ 11mm Pitch* 40 Tooth GT/ 11mm Pitch*

Marine Carbureted System 4MA031-275 4MA031-295 4MA031-312 4MA031-333 4MA031-347 4MA031-360 4MA031-387

10-Rib Pulley (2.75”) 10-Rib Pulley (2.95”) 10-Rib Pulley (3.12”) 10-Rib Pulley (3.33”) 10-Rib Pulley (3.47”) 10-Rib Pulley (3.60”) 10-Rib Pulley (3.87”)

6” Crank Pulley, 6-Rib (Standard) 6.87” Crank Pulley, 8-Rib, 6” Accessory Drive, (H.O.) 6.87” Crank Pulley Assembly, 8-Rib, 6” Accessory Drive, (H.O.) 6.87” Crank Pulley, 10-Rib, 4.75” Accessory Drive, (H.O.) 6.87” Crank Pulley Assembly, 10-Rib, 4.75” Accessory Drive (S.H.O., Includes Fan Spacer w/Hardware) 73T Cog Crank Pulley, 50mm Wide w/retaining rings, 4.5” Accessory Drive, (Mondo) 73T Cog Crank Pulley, 35mm Wide w/retaining rings, 4.75” Accessory Drive (H.O.) 77T Cog Crank Pulley, 35mm Wide w/retaining rings, 4.75” Accessory Drive, (H.O.)

1993 Ford Mustang Cobra 5.0L

6.87” Crank Pulley, 8-Rib, 4.75” Accessory Drive 6.87” Crank Pulley Assembly, 8-Rib, 4.75” Accessory Drive

4.60” Accessory Drive / 8” Crank Pulley (EFI/Renegade)

4GP018-011 4GP116-011

4MA018-041 4MA018-051 4MA018-061

5.9” Accessory Crank Pulley, Twin-Groove 5.9” Accessory Crank Pulley Assembly

6” Crank Pulley, 10-Rib 7” Crank Pulley, 10-Rib 7.8” Crank Pulley, 10-Rib

Universal 5-Bolt Chevrolet / 4-Bolt Ford Small Block

(Use with up to 50mm wide Gates GT belts. Spacing is compatible with with applications using 4MA018-041/-051/-061 10-rib crank pulleys)

4MA018-070

8mm Cog Crank Pulley, 70T GT, 2.5” wide, V-20 Series (can be used with 4FP017-141 crank pulley strut support pilot)

MAXGRIP™ PULLEY ASSEMBLY

4MA018-075

20 0 0 -20 0 8 Ford Mus t ang G T 8 - Rib Supercharger Drive upgrade assembly for high horsepower applications. Includes OEM qualit y A /C pulley, P/S pulley, alternator pulley, idlers and crank dampner pulley, belt, hardware and spacers. Custom programming required.

4MA018-080 8mm Cog Crank Pulley, 80T GT, 2.5” wide, V-20 Series

4FL116-001

6” Accessory Drive / 6.87” Crank Pulley

1993-1997 GM F-Body LT1

Universal 3-Bolt Chevrolet / 4-Bolt Ford patterns

3.47” 8-Rib Supercharger Drive Upgrade 2005-2008 GT 3.33” 8-Rib Supercharger Drive Upgrade 2000-2004 GT

1986-1993 Ford Mustang 5.0L

4FA018-028** 8” Crank Pulley, 10-Rib, 4.6” Accessory Drive, (H.O.) 4FA018-029** 8” Crank Pulley, 8-Rib, 4.6” Accessory Drive, (H.O.)

(Includes Pulley, Spacer and Hardware)

4FU116-001

Power Pulley Packs feature lightweight, aluminum crankshaft and supercharger pulleys, a heavy-duty dual bearing idler, supercharger belt, and all appropriate hardware including idler spacers and fan spacer. Our pulleys offer unique features such as proper SAE specification contours machined directly onto the drive surface of the pulley, which greatly extends the life of the belt.

8E018-275 8E018-295 8E018-312 8E018-333

Small Block Chevrolet (for use w/“long” water pump) 4FU116-001

POWER PULLEY PACKS

1986-1993 Ford Mustang 5.0L EFI/Renegade High-Traction Profile

4GH016-031 6” Crank Pulley, 8-Rib 4GH116-010* 6” Crank Pulley Assembly, 8-Rib

Cog Style Pulley - V-20 Series 2G032-028 2G032-030 2G032-032 2G032-034 2G033-030 2G033-031 2G033-032 2G033-034 2G033-036 2G033-038 2G033-040

4FA118-024 4FA118-026

Cog Style Pulley - 8mm Pitch 2A032-028 2A032-030 2A032-032 2A032-034 2A033-027 2A033-028 2A033-030 2A033-032 2G034-032 2G034-034 2G034-036 2G034-038 2G034-040 2G034-044 2G034-046

8E018-300

CRANK PULLEYS AND ASSEMBLIES Vortech pulleys are the highest quality available in the aftermarket. We use lightweight aluminum stock that is CNC machined to SAE standards. Hard anodized coating provides for long belt and pulley life. Crank pulley assemblies include the pulley, belt and all mounting hardware.

Vortech Supercharger Pulleys are machined from 6061 T-6, hard anodized aluminum with the proper profile to maximize surface contact area for precise fit. Each pulley is built to SAE standards. Cog drive pulleys must only be used with applications that employ H/D superchargers and Vortech Race Bypass Valves. Even though pulley retainer assemblies are listed below, you may reuse these existing parts when installing a new pulley. A change in one pulley size will usually effect boost 1-2 PSIG... down in diameter or tooth count, up in boost and vice versa. Please note: Pulley changes may void the Vortech Supercharger Limited Warranty. Standard Pulley

53 2

8mm Cog Crank Pulley, 75T GT, 2.5” wide, V-20 Series (can be used with 4FP017-151 crank pulley strut support pilot) (can be used with 4FP017-041 crank pulley strut support pilot)

4-Bolt Ford Small Block

(For use with 4MA018 series universal crank pulleys. Drilled with two identical 4-bolt patterns, eight evenly spaced holes total, OEM Ford 5.0L serpentine accessorie alignment.)

4FP016-041 4FP016-051

4.26” Accessory Crank Pulley, V-20 Series, Ford 5.0L 4.26” Accessory Crank Pulley, V-20 Series, Ford 5.0L (use with MSD magnetic trigger wheel)

*Includes all crank pulley mounting hardware and proper drive belt for use with 3.33” s/c pulley. ** Can be used with supercharger support strut assembly 4FA110-020

8E018-285 8E018-300 8E018-315

8-Rib Pulley Pack, w/2.75” Supercharger Pulley 8-Rib Pulley Pack, w/2.95” Supercharger Pulley 8-Rib Pulley Pack, w/3.12” Supercharger Pulley 8-Rib Pulley Pack, w/3.33” Supercharger Pulley 8-Rib Pulley Pack, w/2.85” Supercharger Pulley 8-Rib Pulley Pack, w/3.00” Supercharger Pulley 8-Rib Pulley Pack, w/3.15” Supercharger Pulley

4.75” Accessory Drive / 6.87” Crank Pulley 8E019-275 8E019-295 8E019-312 8E019-333 8E020-250 8E020-275 8E020-295 8E020-333

8-Rib Pulley Pack, w/2.75” Supercharger Pulley 8-Rib Pulley Pack, w/2.95” Supercharger Pulley 8-Rib Pulley Pack, w/3.12” Supercharger Pulley 8-Rib Pulley Pack, w/3.33” Supercharger Pulley 10-Rib Pulley Pack, w/2.50” Supercharger Pulley 10-Rib Pulley Pack, w/2.75” Supercharger Pulley 10-Rib Pulley Pack, w/2.95” Supercharger Pulley 10-Rib Pulley Pack, w/3.33” Supercharger Pulley

4.75” Accessory Drive / 73T Cog Crank Pulley

8E030-027 8E030-028 8E030-030 8E030-032

35mm Wide Cog Pulley Pack, w/27T Supercharger Pulley 35mm Wide Cog Pulley Pack, w/28T Supercharger Pulley 35mm Wide Cog Pulley Pack, w/30T Supercharger Pulley 35mm Wide Cog Pulley Pack, w/32T Supercharger Pulley

4.75” Accessory Drive / 77T Cog Crank Pulley 8E031-027 8E031-028 8E031-030

35mm Wide Cog Pulley Pack, w/27T Supercharger Pulley 35mm Wide Cog Pulley Pack, w/28T Supercharger Pulley 35mm Wide Cog Pulley Pack, w/30T Supercharger Pulley

1994-1995 Ford Mustang 5.0L

5.75” Accessory Drive / 6.88” Crank Pulley 8E028-275 8E028-295 8E028-333

8-Rib Pulley Pack, w/2.75” Supercharger Pulley 8-Rib Pulley Pack, w/2.95” Supercharger Pulley 8-Rib Pulley Pack, w/3.33” Supercharger Pulley

54 1

VORTECH RACING PRODUCTS & ACCESSORIES TEXT

TEXT VORTECH RACING PRODUCTS & ACCESSORIES

BELTS, TENSIONERS...

MISC. ACCESSORIES

SUPERCHARGER DRIVE BELTS 2A046-527 2A048-537 2A048-544 2A048-545 2A041-535 2A041-540 2A041-568 2A041-572 2A041-545 2A046-104 2A046-560 2A048-560 2A048-565 2A048-575 2A048-590 2A046-113 2A046-114 2A046-113 2A046-080 2A046-113 2A046-110 2A046-923 2A046-923 2A046-103 2A046-725 2A048-730 2A048-802 2A046-580 2A046-580 2A048-733 2A046-695 2A046-510 2A048-408 2A048-425 2A048-505 2A048-520 2A038-495 2A046-605 2A046-605 2A046-102 2A046-112 2A046-113 2A046-113 2A046-140 2A046-598 2A044-510 2A044-514 2A044-520 2A044-520 2A047-104 2A047-113 2A041-607 2A041-618 2A041-630

1986-1993 Ford Mustang 5.0L, 6-Rib (Standard) 1986-1993 Ford Mustang 5.0L, 8-Rib (H.O., 2.75” Pulley) 1986-1993 Ford Mustang 5.0L, 8-Rib (H.O., 2.95” Pulley) 1986-1993 Ford Mustang 5.0L, 8-Rib (H.O., 3.33” Pulley) 1986-1993 Ford Mustang 5.0L, 10-Rib (H.O., 2.50” Pulley) 1986-1993 5.0L, 10-Rib (H.O., 2.75 or 2.95” Pulley) 1986-1993 5.0L, 10-Rib (H.O., 2.95” Pulley, 8” Crank Pulley) 1986-1993 5.0L, 10-Rib (H.O., 3.33” Pulley, 8” Crank Pulley) 1986-1993 5.0L, 10-Rib (S.H.O., 3.33” Pulley) 1994-1995 Ford Mustang 5.0L, 6-Rib (Standard) 1994-1995 Ford Mustang 5.0L, 6-Rib (Standard) 1994-1995 Ford Mustang 5.0L, 8-Rib (H.O., 2.75” Pulley) 1994-1995 Ford Mustang 5.0L, 8-Rib (H.O., 2.95” Pulley) 1994-1995 Ford Mustang 5.0L, 8-Rib (H.O., 3.33” Pulley) 1994-1995 Ford Mustang 351 c.i., 8-Rib (3.33” Pulley) 1996-1999 Ford Mustang GT 4.6L, 6-Rib 1994-1998 Ford Mustang V6 3.8L, 6-Rib 1999-2000 Ford Mustang V6 3.8L, 6-Rib 2000-2004 Ford Mustang GT 4.6L 2V, 6-Rib 1996-1998 Ford Mustang Cobra 4.6L, 6-Rib 2001 Ford Mustang Cobra 4.6L 4V, 6-Rib 1998-2000 Ford Contour SVT 2.5L V6, 6-Rib 1998-2000 Mercury Cougar 2.5L V6, 6-Rib 1991-1994 Ford Truck/SUV 4.0L V6, 6-Rib 1997-2002 Ford Truck/SUV 4.6L, 6-Rib 1999-2001 Ford Super Duty Truck 5.4L, 8-Rib 1999-2001 Ford/Lincoln Truck/SUV 5.4L 2V, 8-Rib 1987-1996 Ford Truck/SUV 5.0/5.8L, 6-Rib 1993-1995 Ford Lightning Truck 5.8L, 6-Rib 1999-2001 Ford Super Duty Truck 6.8L, 8-Rib 1987-1997 Ford Truck/SUV 7.5L, 6-Rib 1992-1996 Chevrolet Corvette 5.7L LT1, 6-Rib 1993-1997 GM F-Body 5.7L LT1, 7-Rib (Standard) 1993-1997 GM F-Body 5.7L LT1, 8-Rib (7” Crank Pulley) 1998-2002 GM F-Body 5.7L LS1, 8-Rib (SQ w/Cooler) 1998-2002 GM F-Body 5.7L LS1, 8-Rib (Standard) 1998 GM F-Body 5.7L LS1, 8-Rib (w/Cooler) 1988-1995 GM F-Body 5.0/5.7L TPI, 6-Rib 1990-1995 GM Truck/SUV 5.7L TBI, 6-Rib 1996-2000 GM Truck/SUV 4.3L V6, 6-Rib 1996-2000 GM Truck/SUV 5.7L Vortec, 6-Rib 1996-2004 GM Truck/SUV 5.7L Vortec, 6-Rib 1999-2002 GM Truck/SUV 5.3L Vortec, 6-Rib 1999-2004 GM Truck/SUV 6.0L Vortec, 6-Rib 1988-1995 GM Truck 7.4L TBI, 6-Rib 1999-2000 Honda Civic Si, 4-Rib (3.12” Pulley) 1999-2000 Honda Civic Si, 4-Rib (H.O., 3.33” Pulley) 1999-2000 Honda Civic Si, 4-Rib (Standard, 3.70” Pulley) 1994-2001 Acura Integra GS-R, 4-Rib (3.70” Pulley) 1993-1996 Jeep Grand Cherokee 5.2L, 6-Rib 1991-1999 Dodge Dakota/Ram/Durango 5.9L, 7-Rib Carbureted System, 10-Rib (60.7”) Carbureted System, 10-Rib (61.8”) Carbureted System, 10-Rib (63.0”)

SUPERCHARGER COG BELTS 2A042-138 2A042-139 2A042-144 2A042-145 2A042-146

1392mm x 35mm, Kevlar, HTD, 8mm Pitch 1392mm x 50mm, Kevlar, HTD, 8mm Pitch 1440mm x 50mm, Kevlar, HTD, 8mm Pitch 1440mm x 36mm, Polychain, GT2, 8mm Pitch 1440mm x 50mm, Polychain, GT2, 8mm Pitch

55 2

5A001-009

BELT TENSIONER PLATES & ASSEMBLIES Vortech belt tensioner assemblies for 1986-1993 Ford Mustang 5.0L and universal applications bolt directly onto the supercharger, which is great for custom installations. Each assembly includes the plate, idler pulley and all necessary mounting bolts. A ribbed version of the idler pulley is available for tensioning a 6-Rib belt from the inside. Larger idlers for 8-Rib, 10-Rib and cog drive applications are also available. 4FE111-032 4FA111-032 4FA111-042 4FP116-031 4FP111-032 4FA011-032 4FA011-042

Assembly, Universal, Ribbed (6-Rib) Assembly, 5.0L Std., Smooth (6-Rib) Assembly, 5.0L H.O., (8-Rib) Assembly, 5.0L, (10-Rib) w/Spacer & Plate, 35mm Cog Assembly, 5.0L Mondo, 50mm Cog Tensioner Plate (only) Tensioner Plate, H/D (only)

IDLER PULLEY & ASSEMBLIES 1210517 4MA116-160 4FP116-030 4FP116-020 4FA116-021 4FA116-023 4FU116-031 4FA016-170 4FM016-031 4FR016-150 4GF016-160 4FH016-150 4FU016-021 4FU016-041 4FA016-150 4PCS016-160 4GM016-150

Assembly, 2.5” (6/8-Rib) Assembly w/flanges, Dual Bearing, 3.00” (10-Rib) Assembly w/flanges, Dual Bearing, 3.68” (35mm/10-Rib) Assembly w/flanges, Dual Bearing, 4.00” (50mm) Assembly w/flanges, Dual Bearing, 4.00” (8-Rib) Assembly w/flanges, Dual Bearing, 6.00” (8-Rib) Idler Pulley, 3” Smooth (8-Rib) Idler Pulley, 3” Smooth, Dual Bearing, Composite (8/10-Rib) Idler Pulley, 3” Grooved, Dual Bearing, Composite (8-Rib) Idler Pulley, 3” Smooth, Steel (6-Rib) Idler Pulley, 3” Grooved, Composite (6-Rib) Idler Pulley, 3” Smooth w/Flanges, Composite (6-Rib) Idler Pulley, 3.5” Smooth (8-Rib) Idler Pulley, 3.5” Grooved (8-Rib) Idler Pulley, 3.5” Smooth, w/Flanges, Composite (6-Rib) Idler Pulley, 3.5” No Flange (6-Rib) Idler Pulley, 4” Smooth, Steel (6-Rib)

5A001-001

IGNITION SYSTEM COMPONENTS

OIL INLET FILTER KITS

Vortech’s stand alone ignition system units allow cockpit adjustment of timing relative to boost. With a knob mounted in either dash or console, the driver can select from 0° to 4° retard per PSI of boost pressure to a maximum total retard of 20°. This allows normal advance while not in boost and provides the greatest combination of performance, engine safety and reliability when the engine is being pressurized. The Crane HI-6R System is a multiple spark, capacitive discharge, electronic ignition designed for high-performance street, drag racing and marine applications. It provides up to ten times greater spark energy than stock ignitions and allows for cockpit adjustment of ignition timing.

Excellent way of providing additional safeguards against contaminants reaching your supercharger. Includes the adapter, a spin-on filter, pressure hoses, as well as all required fittings.

5A001-001 5A101-001 5A101-003 5A001-009 5A101-006 5A101-007 5A101-008 5A002-006 5A002-001 5A002-002 5A002-008 5A101-016

Vortech (stand alone) Ignition Retard System, Boost Sensitive, Universal Vortech (stand alone) Ignition Retard System, 1986-1993 Ford Mustang 5.0L Vortech (stand alone) Ignition Retard System, 1994-1995 Ford Mustang 5.0L HI-6R Ignition System, Universal with Map Sensor and Retard Knob HI-6R Ignition System, 1986-1993 Ford Mustang 5.0L HI-6R Ignition System, 1992-1996 GM LT1 Corvette 5.7L HI-6R Ignition System, 1993-1997 GM F-Body 5.7L Two Bar Map Sensor for HI-6R Wiring Harness Adapter, 1992-1995 GM LT1 Wiring Harness Adapter, 1986-1995 Ford EFI Wiring Harness Adapter, 1996-1997 GM LT1 Voltage Clamp, 4.7/4.8/4.9V Settings

8H100-001 8H100-002 8H100-003 8H100-004 8H100-005 8H100-006 8H040-025

1992-1996 Dodge/Jeep Truck 1986-1993 Ford Mustang 5.0L 1986-1996 Ford Truck 5.0/5.8L 1986-1997 Ford Truck 7.4L 1993-1997 GM LT1 F-body 1990-1995 GM Truck 5.0/5.7/7.4L Replacement Oil Filter

OIL FEED FITTING Supercharger oil feed fitting replacement. 8R100-001 7P375-001 7P375-081

Filtered, w/Sealing Washer Filtered, Stainless Steel Filtered, Brass

COMPONENTS

OIL FEED ASSEMBLIES

7C012-020 7C012-022 7J012-092 2A017-016 4FD017-011 4FA016-171

High-quality stainless steel upgrade assemblies made of high-quality stainless steel.

M12x1.75x20 GR5 Bolt, For 8/10-Rib & Cog Tensioner M12x1.75x20 GR5 Bolt, Thin Head for 6-Rib Belt Tensioners M12 Flat Washer Pilot, #6205 Bearing, .386 I.D. Pilot, #6205 Bearing, .515 I.D. #6205 Bearing Dust Cover

ACCESSORY DRIVE BELTS 2A046-547 2A046-888 2A046-031 2A046-988 2A046-980 2A044-335

1986-1993 Ford Mustang 5.0L, 6-Rib (Mondo) 1986-1993 Ford Mustang 5.0L, 6-Rib (S.H.O.) 1994-1995 Ford Mustang 5.0L, 4-Rib 1988-1992 GM F-Body 5.0/5.7L TPI, 6-Rib 1990-1995 GM TBI Truck/SUV 5.7L, 6-Rib 1999-2000 Honda Civic Si H.O., 4-Rib

AIR INTAKE FILTERS

TOOLS

Constructed of high-flow aluminum mesh and cotton fiber, these filters not only clean but also help direct and straighten the airflow for improved circulation. These are standard with most Vortech supercharging systems. Call our sales department for availability of specific applications.

The spark plug gapping tool is for 20052008 Ford Mustang GT/F-150 (racing/highboost applications). Tapered punch and drill bit are used in the installation of oil pan fittings. TL0286-1 7T100-339 7T640-011

Spark Plug Gapping Tool Drill Bit, ‘R’, .339” dia. Tapered Punch

8L101-001 8L101-002 8L101-003 8L101-004 8L101-005 8L101-006 8L101-006 8L101-007 8L101-008 8L101-009

1986-1993 Ford Mustang 1996-2004 Ford Mustang V8 1994-1995 Ford Mustang 1994-2000 Ford Mustang V6 1993-1997 GM LT1 1999-2000 Honda Civic Si 1994-2004 Acura Integra 1997-2004 Ford F-150 1999-2004 GM Truck 1999-2004 Ford Super Duty

56 1

VORTECH UPGRADE, EXCHANGE & REBUILD SERVICES TEXT

TEXT VORTECH RACING PRODUCTS & ACCESSORIES

SUPERCHARGER SERVICES

MERCHANDISE

We offer upgrade, exchange and rebuild services to the owners of our supercharger products. This can be ideal for the individual who has changed the performance characteristics of their engine and may require compressor modifications. It can be done at a fraction of the cost of a new unit. Services are performed at our center by highly skilled technicians. Any service work done to a Vortech supercharger outside our facility will void the original warranty and is not recommended.

SUPERCHARGER UPGRADE SERVICE

PERFORMANCE T-SHIRT 008043 008044 008045 008046 008047 008048 008065 008066 008067 008068

FLEX FIT COTTON CAP 008081 008082 008083 008084 008091 008092

White, Large White, X-Large White, XX-Large Black, Large Black, X-Large Black, XX-Large Red, Medium Red, Large Red, X-Large Red, XX-Large

Grey, Small/Medium Grey, Large/X-Large Red, Small/Medium Red, Large/X-Large Black, Small/Medium Black, Large/X-Large

VORTECH POLO SHIRT 008010 008011 008012 008013 008014 008015 008096 008016 008095 008017 008018

Gray, Large Gray, X-Large Navy, Large Navy, X-Large White, Large White, X-Large White, XX-Large Black, Large Black, XX-Large Black, XXX-Large Blue, XXX-Large

LICENSE PLATE FRAME 008130

Vortech License Frame

Red/White, Small Red/White, Medium Red/White, Large Navy/White, Small Navy/White, Medium Navy/White, Large

008020 008021 008022 008023

Navy, Medium Navy, Large Navy, X-Large Navy, XX-Large

Upgrade V-1/V-2 SQ S-Trim to Si-Trim

SATIN FINISH

POLISHED

DESCRIPTION

DISCHARGE

CONFIGURATION

SATIN FINISH

POLISHED

DESCRIPTION

DISCHARGE

CONFIGURATION

00100031 00100032 00100035

00100033 00100034 00100036

S-Trim Upgrade S-Trim Upgrade S-Trim Upgrade

Curved Straight Straight

Standard Standard CCW

00100152 00100150 00100154

00100153 00100151 00100155

Si-Trim Upgrade Si-Trim Upgrade Si-Trim Upgrade

Curved Straight Straight

Standard Standard CCW

This upgrade includes a high-efficiency, curved blade S-Trim impeller that is high-speed, precision (race-spec) balanced, new S-Trim compressor housing, replacement of all bearings and seals, new select-fit impeller spacer and nut, new compressor retainers, detailed inspection of all supercharger components, balancing and assembly labor.

Upgrade V-1 SC-Trim to V-1 S-Trim

This upgrade includes a high-efficiency, curved blade S-Trim impeller that is high-speed, precision (race-spec) balanced, new selectfit impeller spacer and nut, new compressor retainers, detailed inspection of supercharger components, balancing and assembly labor. This is a popular upgrade for the 1996-1998 Ford Mustang Cobra. For the 1986-1993 Mustang, the above modifications also includes upgraded aluminum discharge duct with Bosch bypass valve, hoses, tee, fittings, clamps and inlet elbow with boss. Only recommended for vehicles equipped with a charge cooler and/or aftermarket pistons. SATIN FINISH

POLISHED

DESCRIPTION

00100097 00100049

00100098 N/A

S-Trim Upgrade (1986-1993 Mustang) S-Trim Upgrade (1996-1998 Cobra)

This upgrade includes a new volute, new select-fit impeller spacer and nut, detailed inspection of supercharger components, balancing and assembly labor. SATIN FINISH

POLISHED

DESCRIPTION

00100050

N/A

XX-Trim Upgrade Straight

DISCHARGE

CONFIGURATION

H/D

This upgrade includes the ultra efficient, curved blade Si-Trim impeller that is high-speed, precision (race-spec) balanced, new select-fit impeller spacer and nut, new compressor retainers, detailed inspection of supercharger components, balancing and assembly labor.

Upgrade Heavy Duty V-1 R-Trim to T-Trim

This upgrade includes a new volute, machining of the gear case to accept the new T-Trim impeller, replacement of all bearings and seals, new high-flow curved blade T-Trim impeller that is highspeed, precision (race-spec) balanced, new compressor retainers, detailed inspection of all supercharger components, balancing and assembly labor. SATIN FINISH

POLISHED

DESCRIPTION

DISCHARGE

CONFIGURATION

00100043 00100044 00100047

00100045 00100046 00100048

T-Trim Upgrade T-Trim Upgrade T-Trim Upgrade

Curved Straight Straight

H/D H/D H/D, CCW

Upgrade Heavy Duty V-1 S-Trim to T-Trim

This upgrade includes a new volute, high-flow curved blade T-Trim impeller that is high-speed, precision (racing-spec) balanced, T-Trim compressor housing, new select-fit impeller spacer and nut, new compressor retainers, detailed inspection of supercharger components, balancing and assembly labor. SATIN FINISH

POLISHED

DESCRIPTION

DISCHARGE

CONFIGURATION

00100037 00100038 00100041

00100039 00100040 00100042

T-Trim Upgrade T-Trim Upgrade T-Trim Upgrade

Curved Straight Straight

H/D H/D H/D, CCW

VORTECH BANNER 008426

2ft x 5ft Vinyl Banner

DECALS MARINE POLO SHIRT

Upgrade V-1 A-Trim/B-Trim to V-1 S-Trim

Upgrade V-4 X-Trim to V-4 XX-Trim

LADIES RAGLAN SHIRT 008070 008071 008072 008075 008076 008077

OXFORD LONG SLEEVE 008060 008061 008062

White, Large White, X-Large White, XX-Large

57 2

008100 008110 008112 008114 008116 008120

Vortech Windshield Banner Silver, Decal 4 in. x 3 in. Yellow, Decal 4 in. x 3 in. Red, Decal 4 in. x 3 in. White, Decal 4 in. x 3 in. Blue, Decal 4 in. x 3 in.

SUPERCHARGER EXCHANGE SERVICE

SUPERCHARGER REBUILDING SERVICE

For those seeking more than is offered with the Upgrade Service, our Supercharger Exchange Program allows retail customers a credit of up to $1,000 toward the cost of a new unit. Certain limitations and restrictions apply; consult our product support department for more information.

Vortech offers two factory rebuild options. Our Minor Service includes replacement of all bearings, seals, inspection of all supercharger components, balancing and assembly labor. The Major Service includes all of the above plus gears (upgraded to current specifications where applicable).

Please Note: Prior to sending a supercharger to us for service, please call our technical support department for a return authorization number. For upgrades and rebuilding service, if the inspection reveals that additional components and/or labor are needed, the customer will be notified for approval prior to completion. A $100 inspection fee will apply on all upgrades and rebuilds where the customer has decided not to continue due to additional parts and/or labor required. Normal turnaround on factory supercharger services is seven to ten business days. For specific details on any of the above programs, call our product support department or visit our website.

58 1

AUTOMOTIVE LIMITED WARRANTIES PROGRAM TEXT

TEXT AUTOMOTIVE LIMITED WARRANTIES PROGRAM

LIMITED WARRANTY Subject to all terms, conditions and exclusions in this document, VORTECH ENGINEERING, LLC (“Vortech”) provides the following warranties to the original purchaser of certain Vortech products. In this document, “You” and “Your” mean only the original purchaser of the warranted Vortech product covered by one or more of these warranties. The terms of this LIMITED WARRANTIES PROGRAM cannot be amended orally or in writing by any Vortech employee, representative or agent, and any promises inconsistent with this limited warranty are void and unenforceable against Vortech. VORTECH PRODUCED STREET LEGAL SUPERCHARGER SYSTEMS LIMITED WARRANTIES - THREE YEARS ON STREET LEGAL SUPERCHARGERS IN SYSTEMS - ONE YEAR ON MOST OTHER SYSTEM COMPONENTS

Vortech warrants to You that the superchargers included by Vortech in its street legal supercharger systems listed on its current Vortech Engineering Application Guide will be free from defects in materials and workmanship in the bearings, gears, gearcase, impeller and volute for three years after the date of Your purchase of the system. The balance of the system, excluding Forcepower Parts, will be free from defects in materials and workmanship for one year after the date of Your purchase of the system. The following requirements apply to this warranty: » You must be the original purchaser of the Street Legal Supercharger System. » You must reside and use the Vortech product within the United States or Canada. » The supercharger may not have been altered, disassembled, or modified in any way. » The supercharger drive pulley must not be changed and the original pulley seal must be intact. » The original Vortech serial number tag must not be removed, altered or replaced. » You must change the engine oil and oil filter at least every 3,000 miles, using a minimum SH rated oil or synthetic lubricant, regardless of the vehicle, filter or oil manufacturer’s recommendations for oil change intervals. » You must remove, inspect and clean the oil inlet fitting to the supercharger every 12,000 miles. VORTECH COMPUTER MODULE, HAND HELD FLASH PROGRAMMER, AND HALTECH F5 COMPUTER - ONE YEAR LIMITED WARRANTY

Vortech warrants to You that the Vortech Computer Module, Hand Held Flash Programmer and Haltech F5 Fuel Computer unit will be free from defects in material and workmanship for one year after the date of Your purchase. Crane Electronics, MSD Electronic Components, MAF signal massagers and other electronic components and parts produced by third parties are warranted and serviced exclusively by their respective manufacturers and must be returned to them for any warranty consideration. VORTECH INDIVIDUAL SUPERCHARGERS -ONE YEAR LIMITED WARRANTY

Vortech warrants to You that Vortech’s individual non-heavy duty supercharger, including those used by other companies in their own supercharger kits or systems, will be free from defects in materials and workmanship in the bearings, gears, gearcase, impeller and volute for one year after the date of Your purchase of that supercharger. SUPERCHARGER UPGRADES, MAJOR REPAIRS AND MINOR REPAIRS - SIX MONTH LIMITED WARRANTY

Vortech warrants to You that Vortech superchargers that are upgraded or receive a major or minor repair by Vortech (“Vortech Modified”) will operate as designed or intended by Vortech and be free from defects in materials and workmanship in the gears, gearcase, impeller and volute for six months after the earlier of the date the Vortech Modified supercharger is received by You from Vortech, or five (5) days after Vortech shipped the Vortech Modified supercharger back to You. This warranty runs concurrently with the supercharger’s original purchaser warranty. This means the six-month warranty does not extend the original warranty period for the supercharger or supercharger system, whichever is applicable. FORCEPOWER PARTS - NINETY DAY LIMITED WARRANTY

Vortech warrants to You that Vortech’s Forcepower Parts will be free from defects in materials and workmanship for ninety days after the date of Your purchase of that Forcepower Part. Forcepower parts are the following, as well as any additions to the Forcepower line that Vortech may add: » Fuel pumps » Oil feed and oil drain components » Mounting components » Supercharger drive pulleys and components » Idler pulleys » Air inlet and discharge systems » Powercooler systems » Air valves » Fuel rails » Intake manifolds » Mass air flow units » Fuel management units » Fuel filters » Power pulley packs THE FOLLOWING WARRANTY EXCLUSIONS APPLY TO ALL VORTECH LIMITED WARRANTIES

Vortech’s limited warranties do not cover any of the following damages or items: » damages to and/or failure of any non-Vortech component or equipment on a vehicle including, but not limited to, the engine, electrical system, transmission and differentials; » damage caused by Acts of God, normal wear and tear, or damage to a vehicle or engine caused by backfire, tuning by others, collision and/or engine failure; » any costs incurred for towing or downtime of the vehicle; » any labor costs to diagnose problems or to remove or replace the Vortech products; or » any damage caused by the use of another company’s fittings or pulleys. The following non-Vortech occurrences, uses and modifications are considered misuse of the Vortech product and invalidate all Vortech warranties: » Any disassembly or attempted disassembly of any Forcepower parts. » Any disassembly or attempted disassembly of a supercharger, volute, gearcase or other components. » Damage resulting from ingestion of debris by the supercharger. » Improper supercharger installation. » Improper drive pulley/belt combination on the supercharger. » Excess belt tension on the supercharger belt drive. » Overspeeding the supercharger. » Restricted or blocked supercharger air intake resulting in excessive negative pressure at the air inlet. » Damage due to improper supercharger sizing and compressor surge, or by tuning. » Free revving of the engine with the belt driving the supercharger in place. » Improper size, installation, adjustment or lack of a bypass valve. » Restricted, or lack of, oil supply to the supercharger. » Improper installation of, or blocked or restricted, oil drain line. » Excessive engine crankcase pressures. » Dirty or contaminated engine oil. » Removing or defacing the original Vortech serial number tag.

59 2

REMEDIES

of repair or replacement authorized by You orally or in writing. Your sole remedy for the above warranties is the repair or replacement of the defective product, 6. Ship the properly safety packaged and marked box via United Parcel Service (800) at Vortech’s sole discretion. 742-5877, www.ups.com, or other carrier, prepaid and insured for the retail value of the product being returned to: WARRANTY CLAIM PROCEDURES VORTECH ENGINEERING, LLC If a Vortech product is within the warranty period and You wish to make a claim, please follow Product Support Department the following procedure: 1650 Pacific Avenue 1. Call Vortech at (805) 247-0226, ask for the Product Support Department and have the Channel Islands, CA 93033-9901 following information available: R.A. number _________________________________ » Serial number of the supercharger (if applicable). » Copy of original invoice on which the product was purchased (must be dated and show If a Vortech limited warranty applies, Your product will be repaired or replaced at Vortech’s option and returned to You, freight prepaid (excluding any international taxes, tariffs, retail store name). customs and/or duties which must be paid by You), via UPS ground service. If a Vortech » Year, make, model, vehicle mileage and engine specifications of the vehicle. limited warranty does not apply, we will advise You of the reason for denial and explain the » Number of miles on the Vortech product. costs involved in repair or replacement of the Vortech product. After relaying this information » Description of the problem. 2. Vortech will then offer suggestions to help You in troubleshooting or will issue a return Vortech will, at Your option, either proceed with the repairs as quoted or return the Vortech product(s) in the condition it/they are in at the time of inspection of the warranty evaluation authorization (R.A.) number to return the product for warranty evaluation. 3. If You have been issued an R.A. number, You must “safety package” each product, which by Vortech. If the warranty does not apply and You do not want Vortech to repair or replace means You must plug or seal all oil and air openings, place the properly plugged and sealed the Vortech product, You will still be charged a disassembly and inspection charge for the product(s) within a shipping box strong enough to hold the weight of the product(s) and to product and the product will be returned UPS COD, insured for the new retail replacement maintain its shape during shipping with adequate packaging material so that the product(s) value. This means You must pay any disassembly and/or inspection charges, return shipping, will not hit other product(s), component(s), or the side of the box during shipping. You and insurance charges to UPS before the Vortech product will be returned. The minimum may want to use a professional shipping company. Clearly mark the R.A. number in large supercharger inspection charge is $100. The minimum charge for all other product inspection (approximately 2”) alphanumeric characters in two locations on the outside of the box with is $25. PERFORMANCE CONSUMER’S BILL OF RIGHTS a bold marker. Vortech supercharger systems are designed to meet both EPA and CARB requirements 4. Include in the shipping box the following items: for classification as 50-state legal. Street legal certification can be a lengthy process, and » Serial number of the supercharger (if applicable). » Copy of original invoice on which the product was purchased (must be dated and show systems are sometimes sold by Vortech before 50-state legal classification is granted. Contact Vortech directly to confirm the current classification of Your System. The installation retail store name). of Vortech products, except those identified “for racing use only” or that “may not be legal » Year, make, model, vehicle mileage and engine specifications of the vehicle. for use on public roads”, do not void the new vehicle warranty nor should they cause the » Number of miles on the Vortech product. vehicle to fail an emissions test. Notify the vehicle manufacturer if either of these events » Description of the problem You observed. occurs. If the vehicle manufacturer fails to honor emission/warranty claims, You may contact » Return authorization number (R.A.). the Environmental Protection Agency (EPA) at (202) 260-2080 or www.epa.gov. If federal » Address to which the product is to be shipped after inspection. 5. Issuance of an RA does not mean that the Vortech Product will be covered by one or more warranty protection is denied, call the Federal Trade Commission (FTC) at (202) 326-3128 of the Vortech limited warranties. If the Vortech product is not covered by a warranty, then or www.ftc.gov. Additional information is available at the Specialty Equipment Market You will be charged, and You agree to pay, the minimum inspection charge plus any charges Association (SEMA) website at www.sema.org.

EXTENT OF WARRANTY – ADDITIONAL EXCLUSIONS AND LIMITATIONS

The duration of any and all implied warranties is limited to the duration of this express warranty. All incidental and consequential damages are hereby excluded. Some states do not allow limitations on how long an implied warranty lasts, or exclusion or limitations of incidental or consequential damages, so the above limitations or exclusions may not apply to You. This warranty gives You specific legal rights, and You may have other rights that vary from state to state.

» Photo by AutoFocus / Peter S. Linney