ACL standard del 1 by PBZ AB

INDEX Index ............................................................................I Disclaimer ...................................................................II Warehouse Locations................................................III Understanding Your Catalog ....................................IV Trimetal or Bimetal.....................................................IX Race Series Bearings ................................................XI Fitting Instructions.....................................................XII Flexigauge ..................................................................XIV ACL Bearing Materials...............................................XV Reference Data ...........................................................XVII Notes for the Machinist and Assembler...................XXI Alphabetical Listing by Make....................................XXIII Engine Application Section.......................................1-558 Interchanges ...............................................................559-577 Numerical Listing .......................................................578-587 Note: All information in this catalog has been collated from the most authoritative and reliable sources. As far as we are able to ascertain, it is correct. No responsibility can be accepted should any details be found to be incorrect. We welcome advice on any errors which may come to your notice. Oil Clearances: Please note that in some instances, the vertical oil clearances specified in the ACL catalog may differ from those of the OE vehicle manufacturers’, as the ACL catalog’s clearances are a theoretical calculation derived from the maximum and minimum clearances obtainable with all shaft diameter / housing bore and bearing thickness combinations. Always adhere to the OE vehicle manufacturers’ recommended clearances where available.

ACL Distribution, Inc., and any of its affiliates (“ACL”), reserves the right, at any time, to modify, amend, alter or update the following terms of use, and, by purchasing any parts in this catalog (the “Parts”), you agree to be bound by the following and any such modifications, amendments, alterations or updates: DISCLAIMER Proper service and repair procedures are vital to the safe, reliable operation of all vehicles as well as the personal safety of those performing the repairs. Standard safety procedures and precautions (including use of safety goggles and proper tools and equipment) should be followed at all times to eliminate the possibility of personal injury or improper service which could damage the vehicle or compromise its safety. Installation of the Parts could affect your vehicle’s manufacturer warranty coverage. ACL is not responsible for damages to your vehicle’s engine or the Parts resulting from the failure to properly maintain or repair your vehicle or the use of the Parts in non-standard, offroad applications. You should keep your vehicle in good maintenance and repair and you agree to assume all risks of utilizing the Parts in off-road or performance applications. NO WARRANTIES DUE TO THE INTENDED USE OF PERFORMANCE APPLICATIONS, THE PARTS ARE SOLD ON AN “AS IS” BASIS, WITHOUT ANY WARRANTIES OR REPRESENTATIONS, EXPRESS OR IMPLIED, OF ANY KIND, INCLUDING, WITHOUT LIMITATION, MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, OR ANY IMPLIED WARRANTY. LIMITATION OF LIABILITY IN NO EVENT SHALL ACL BE LIABLE FOR ANY DAMAGES (INCLUDING, WITHOUT LIMITATION, DIRECT, INDIRECT, PUNITIVE, GENERAL, INCIDENTAL, SPECIAL OR CONSEQUENTIAL DAMAGES, CLAIMS FOR PERSONAL INJURY, WRONGFUL DEATH OR LOST PROFITS, OR DAMAGES RESULTING FROM BUSINESS INTERRUPTION) WHETHER IN ACTION OR UNDER CONTRACT, TORT OR STRICT LIABILITY OR OTHERWISE, THAT RESULT FROM THE USE OF, OR INABILITY TO USE, THE INFORMATION, MATERIALS, OR PRODUCTS CONTAINED IN OR PURCHASED FROM THIS CATALOG. BECAUSE SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES, IN SUCH STATES LIABILITY IS LIMITED TO THE FULLEST EXTENT PERMITTED BY LAW. ALL CLAIMS SHALL BE GOVERNED IN ALL RESPECTS BY MICHIGAN LAW, WITHOUT REGARD TO CONFLICT OF LAWS PRINCIPLES. Any claims arising in connection with the use of, or inability to use, the information, materials, or products contained in or purchased from this catalog must be brought within one (1) year of the date giving rise to such action or be forever barred.

5HJLRQDO 'LVWULEXWLRQ &HQWHUV 6RXWKHUQ 7H[DV $UHD 3ULPH $XWRPRWLYH :DUHKRXVH 1RUWK 6KHSKHUG 'ULYH %OG +RXVWRQ 7; )$;

1RUWK &DUROLQD 6RXWKHDVW $UHD 7HPSOLQ $VVRFLDWHV 1 'DYLGVRQ 6WUHHW &KDUORWWH 1& )$;

0LVVRXUL 0LGZHVW $UHD 0HOOLQJ 5LYHUIURQW 5RDG .DQVDV &LW\ 02 )$;

:DVKLQJWRQ 1RUWKZHVW $UHD 5RFNHU $UP 6XSSO\ &R 1RUWK /LQFROQ 6SRNDQH :$ )$;

2UHJRQ 1RUWKZHVW $UHD 5- 7HPSOHWRQ /RQJ 6WUHHW 3RUWODQG 25 )$;

1HZ <RUN 1HZ -HUVH\ 1RUWKHDVW $XWRPRWLYH 3URGXFWV 'LFNHUVRQ 6WUHHW 1HZDUN 1- )$;

1RUWKHUQ &DOLIRUQLD $UHD &RPPHUFLDO 'LVWULEXWLRQ %R[ZRRG 6WUHHW 6DFUDPHQWR &$ )$;

6RXWKHUQ )ORULGD $UHD 1DWLRQDO $XWR 3DUWV :DUHKRXVH 1: Â¶QG $YHQXH 0LDPL )/ )$;

*HRUJLD 6RXWKHDVW $UHD 0XOWL 3URGXFWV 6XSSO\ 0LOWRQ $YHQXH 6 ( $WODQWD *$ )$;

,QGLDQD 0LGZHVW $UHD $XWRPRWLYH 3URGXFWV 1RUWK 3LQH 6WUHHW ,QGLDQDSROLV ,1 )$;

6RXWKHUQ &DOLIRUQLD $UHD 603 1DWLRQDO &LW\ :HVW WK 6WUHHW 1DWLRQDO &LW\ &$ )$;

1RUWKHUQ 7H[DV $UHD 52/ :DUHKRXVH *RYHUQRUV 5RZ 'DOODV 7; )$;

6RXWKHUQ &DOLIRUQLD $UHD 'RQ *URVV :DUHKRXVH (DVW WK 6WUHHW 9HUQRQ &$ )$;

$UL]RQD 6RXWKZHVW $UHD 530 $VVRFLDWHV ,QF 1RUWK UG 'ULYH 3KRHQL[ $= )$;

0LQQHVRWD 1RUWK &HQWUDO $UHD -REEHUV :DUHKRXVH 6XSSO\ ,QF %U\DQW $YHQXH 1RUWK 0LQQHDSROLV 01 )$;

2QWDULR &DQDGD $XWR 3DUWV )HH :DUHKRXVH .LPEHO 6WUHHW 8QLW 0LVVLVVDXJD 21 / 6 0 )$;

0DQLWRED &DQDGD 8QLWHG 6DOHV $VVRFLDWHV :DOO 6WUHHW :LQQLSHJ 0% 5 & 3 )$;

4XHEHF &DQDGD /RX %RXGULDV /WHH &KDPS GÂ¶(DX 6W /HRQDUG 34 + 3 < )$;

&HQWUDO 'LVWULEXWLRQ &HQWHU ACL Distribution, Inc. 4722 Danvers Drive SE, Kentwood, MI 49512 Phone : (800) 847-5521 Fax : (616) 956-1311 III

UNDERSTANDING YOUR CATALOG This catalog is designed in an index format to make the selection of ACL engine bearings an easy task. 1.

Locate the Manufacturer â&#x20AC;&#x201C; these names are listed at the top of each page in alphabetical sequence.

Locate the type of engine you have by using the Engine Index at the beginning of each section. Confirm your engines details by comparing the displacement, cylinder configuration and year breaks. Engine designations and VIN codes are also provided to help narrow down your selection. Once you have found the engine you are looking for, note the corresponding Line number.

EXAMPLE ENGINE INDEX

3. Turn to the Line number for easy selection of components. The line number will appear at the top of each group as per the example below. Each page in the catalog carries the same column heading as per the example below. The information contained within each column is very comprehensive. It is available at a glance to the parts department and workshop machinist. IV

CATALOG BODY EXAMPLE

The following explanation provides all the knowledge required to obtain the most from your ACL catalog/workshop manual. 1. ROD

TYPE AND LOCATION denotes Connecting Rod big end bearing. Each engine requires one pair of bearings per rod. ACL bearings are generally sold in complete engine sets. Any pertinent comments affecting bearing sets are noted in the appropriate engine section.

MAIN

denotes Crankshaft Main Bearings. The position or location of each main pair in the engine is shown by numbering from the front (No.1) to the rear (flywheel end). Engines often require several pairs of different mains to make up a complete set, therefore ACL main bearings are only sold as complete sets.

(Fl)

denotes the Flanged main bearing.

THRUST

denotes Thrust Washers. These are sold as engine sets and should always be ordered with the corresponding main sets.

CAM

denotes Camshaft bearings. It also includes the position of each bearing in the engine, using the same system as the main bearings (i.e. No. 1 cam bearing at the front). Camshaft bearings are generally sold in engine sets only.

SMALL END

denotes Small End Bush. Some engines have piston pins clamped or held with an interference fit direct in the eye or small end of the connecting rod and therefore do not require bushes. Where bushes are used, each connecting rod generally requires one bush. Small end bushes are sold as single pieces. Most small end bushes require boring after being fitted to the small end of the connecting rod. A few only require a light ream (see notes in the body of the catalog).

AR AUXILIARY

denotes Auxiliary Shaft bearings. It also includes the position of each bearing in the engine, using the same system as the main bearings (i.e. No. 1 Auxiliary Shaft bearing at the front). Auxiliary Shaft bearings are generally sold in engine sets only.

BALANCE SHAFT

denotes Balance Shaft bearings. It also includes the position of each bearing in the engine, using the same system as the main bearings (i.e. No. 1 Balance Shaft bearing at the front). Balance Shaft bearings are generally sold in engine sets only.

CAM TOWER

denotes Cam Tower repair inserts. These are available for the reconditioning of some alloy cylinder heads. For the required housing size for each of these sets refer to the technical specifications listed in the body of the catalog.

STANDARD SHAFT SIZE Minimum & Maximum dimensional information supplied in metric and imperial format.

HOUSING BORE Minimum & Maximum dimensional information supplied in metric and imperial format.

MAX. BEARING THICKNESS Maximum dimensional information supplied in metric and imperial format.

VERTICAL OIL CLEARANCE Minimum & Maximum dimensional information supplied in metric and imperial format. This is generally the calculated theoretical oil clearance when the “stack up” of tolerances of the housing size, journal size and bearing wall thickness are taken into account.

MAX. OVERALL LENGTH Maximum dimensional information supplied in metric and imperial format.

For each dimension, the metric figure is shown first and the imperial immediately follows.

7. F1

MATERIAL CODE Cast white metal, tin based, steel based. NOMINAL COMPOSITION: 89% Tin, 7.5% Antimony, 3.5% Copper

F23

Cast white metal, lead based, steel based. NOMINAL COMPOSITION: 83% Lead, 15% Antimony, 1.0% Tin

F100

Sintered Copper Lead, unplated, steel backed. NOMINAL COMPOSITION: 80% Copper, 10% Tin, 10% Lead

F147

Rolled Aluminum Tin, steel backed. NOMINAL COMPOSITION: 91% Aluminum, 6% Tin, 1.5% Silicon, 1% Copper, 0.5% Nickel

F250

Sintered Copper Lead, unplated, steel backed. NOMINAL COMPOSITION: 74% Copper, 23% Lead, 3% Tin

F780

Sintered Copper Lead, overlay plated, steel backed. NOMINAL COMPOSITION: 74% Copper, 24% Lead, 2% Tin

F781

Sintered Copper Lead, overlay plated, hardened steel back. NOMINAL COMPOSITION: 74% Copper, 24% Lead, 2% Tin

F810

Cast Aluminum Tin Silicon, steel backed. NOMINAL COMPOSITION: 88% Aluminum, 9% Tin, 2.5% Silicon, 0.8% Copper

F817

Rolled Aluminum Tin, steel backed. NOMINAL COMPOSITION: 83% Aluminum, 17% Tin

F820

Rolled Aluminum Tin, steel backed. NOMINAL COMPOSITION: 80% Aluminum, 20% Tin

F830

Rolled Aluminum Tin, steel backed. NOMINAL COMPOSITION: 70% Aluminum, 30% Tin

Literature dealing with the different characteristics of these bearing materials is available on written request to ACL.

VII

QTY SET This denotes the numbers of pieces per set.

BEARING SHELL NO. Bearing shell numbers applicable to the pairs or full circle bearings (e.g. cam bearings) corresponding to their location in the first column. All of the pairs and/or full circle bearings required to make the set are shown here.

IDENTICAL HALVES OR UPPER AND LOWER This information is provided to indicate where the pairs are made up of different upper and lower halves rather than containing identical uppers and lowers. Where uppers and lowers differ, “U” and “L” are stamped on the respective halves and normally the notch or tang position will prevent incorrect fitting. However, it is possible to fit some bearings upside down, particularly in certain Japanese applications. If this happens, it can effectively block off crankpin oil feed with disastrous consequences. Important Note: Engine location for the bearing shell number is listed in column 1, Type and location. Failure to position the bearings in the numbered location will possibly result in engine bearing failure. 10.

ENGINE SET NO. SIZES AVAILABLE This column has been shaded along with the engine identification section heading for each engine group listing for easy selection of sets. Any pertinent comments affecting bearing set or bush selection are noted immediately top the right of the type of bearing listed in Column 1, type and Location. The range of sizes serviced by ACL is detailed below the bearing set number.

ACL REPLACEMENT SET NUMBERING SYSTEM

4B1234–STD Denotes qty of pairs per set Denotes set type B = Rod set M = Main set C = Cam set T = Thrustwasher set BS = Balance Shaft set AB or RB = Small end bush SC = Special Cam set

Denotes Part Number and Sizes Available

VIII

75,0(7$/ RU %,0(7$/ 75,0(7$/ RU %,0(7$/ ACL â&#x20AC;&#x201C; The right choice Which material is best? You decide based on your needs. Bearing Type Characteristic

Duraglide

Aluglide

Strength Ability to assume prolonged, high fatigue loads

Babbitt overlay (<20HV) is supported by a strong copper lead alloy (>50HV) in turn supported by the steel backing. Strength is high as long as the overlay is thin (<20um)

Strength is engineered through targeted alloying and modification of the Aluminum structure particularly with the addition of Silicon (from 45 to 55HV). No overlay means that the load is assumed directly by the alloy and transmitted through to the steel.

Very soft Babbitt overlay readily adapts. Copper lead alloy has moderate conformability and helps to adapt where shape errors are significant.

Alloy composition, casting and heat treatment methods develop exceptional toughness. This enables the alloy to conform without detriment to strength.

Crankshaft journal finish is the dominant factor. Contact with bearing surface results in adaptation through wear of the Babbitt layer with no damage to the shaft.

Bearing and shaft interact beneficially. Extra fine silicon particles at the bearing surface act as a mild polishing agent that moderates shaft surface roughness. System adapts to maintain oil film integrity. This is particularly effective when running against cast iron shafts.

The lead in the Babbitt and copper-lead alloy has natural lubricity and can function as a dry lubricant. The low melting point of the alloy also allows it to provide a temporary liquid lubricant.

The tin phase of the alloy provides lubricity and low melting point liquid lubricant but is not as effective as lead.

Anti-Wear Resistance to abrasion by shaft and dirt.

Babbitt alloys are prone to wear (see above), however the alloy composition is carefully controlled to optimize the strengthening effects of copper in turn minimizing the wear potential.

The relatively harder surface of the aluminum alloy has substantially reduced wear. Combined with shaft interaction (see above), which minimizes shaft abrasion, wear becomes insignificant.

Embeddability The ability to absorb dirt entrained in the oil without damage to the bearing or shaft

The soft Babbitt readily absorbs all kinds of dirt particles up to 15um without damage. Larger particles are accommodated less readily by the underlying layers.

As the aluminum alloy is substantially softer than shaft materials, hard particles of all sizes will embed rather than score the shaft. The toughness of the alloy ensures that the localized deformation does not compromise strength.

Anti-Corrosion Ability to withstand chemical attack from degraded or contaminated oil

Tin content in the alloys gives the lead partial protection from attack. If the bearing is worn to the copper-lead layer, resistance is minimal.

Aluminum tin based alloys are essentially inert to known contaminants.

Applications

Duraglide bearings provide a combination of high strength and the ability to withstand harsh/demanding operating conditions. This makes them ideal for performance/race engines and rebuilds.

Aluglide bearings provide a combination of moderate to high strength, good seizure resistance and excellent wear resistance. These bearings are ideally suited to general purpose applications (passenger cars and light commercial vehicles) where reliability and long service intervals are desirable. Aluglide bearings are highly preferred in modern import engines that have been designed for aluminum based bearings as OE standard fitment.

Anti-Seizure Conformability Ability to adapt to assembly and misalignment errors Compatibility Ability to accommodate shaft to bearing contact through thin oil films

Emergency Running Ability to continue operation during temporary oil film breakdown

7KH QHZ JHQHUDWLRQ HQJLQH EHDULQJV QJLQH EHDULQJV Â² Â² VPDUW 7KH QHZ JHQHUDWLRQ HQJLQH EHDULQJV VPDUW VWURQJ WR VWURQJ VWURQJ W WRXJK R RXJK JK

([FHOOHQFH LQ HQJLQHHULQJ ( H HQ H LQ HQJLQHHULQJ GHVLJQ DQ HVLJQ DQG PHWDOOXUJ\ SURGXFH DQ PHWD PHWDO UJ SUR FH H RXWVWDQGLQJ HQJLQH EHDULQJV RXWVWDQ RXWVWDQGLQJ HQJLQH EHDULQJV LQJ HQJLQH EHDULQJV

ALPHABETICAL LISTING BY MAKE MAKE

PAGE NO.

ACURA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-4 ACURA PERFORMANCE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-7 ALFA ROMEO . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 AM GENERAL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 AMERICAN MOTORS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11-15 AUDI . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17-20 AUSTIN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21-22 BMW . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23-25 BUICK . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29-48 CADILLAC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50-61 CHEVROLET . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70-100 CHEVROLET PERFORMANCE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 101-105 CHRYSLER . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 108-118 CHRYSLER PERFORMANCE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 119-122 DAEWOO . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 123-124 DAIHATSU . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 125-126 DEUTZ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 127 DODGE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 134-155 EAGLE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 156-161 FORD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 169-200 FORD PERFORMANCE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 201-206 GEO . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 207-209 GMC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 214-233 HONDA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 235-242 HONDA PERFORMANCE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 243-246 HUMMER . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 247-248 HYUNDAI . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 249-253 INFINITI . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 254-255 INFINITI PERFORMANCE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 256-257 INTERNATIONAL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 259-263 INTERNATIONAL TRACTOR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 264-265 ISUZU . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 267-280 JAGUAR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 281-282 JEEP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 284-295 KIA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 296-298 LEXUS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 299-301 LEXUS PERFORMANCE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 302-303 LINCOLN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 304-312 LISTER PETTER . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 313-326 LOTUS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 327 MAZDA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 329-341 MAZDA PERFORMANCE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 342 MERCURY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 345-366 MG . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 367-370 MITSUBISHI . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 372-382 MITSUBISHI PERFORMANCE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 383-386 IV

ALPHABETICAL LISTING BY MAKE MAKE

PAGE NO.

NISSAN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 389-399 NISSAN PERFORMANCE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 400-403 OLDSMOBILE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 407-431 PERKINS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 432-434 PEUGEOT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 435-436 PLYMOUTH . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 441-458 PONTIAC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 464-493 SAAB . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 494-495 SATURN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 496-497 SCION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 498 STERLING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 499 SUBARU . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 501-506 SUBARU PERFORMANCE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 507-510 SUZUKI . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 511-513 TOYOTA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 516-538 TOYOTA PERFORMANCE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 539-540 TRIUMPH . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 541 VOLKSWAGEN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 544-553 VOLKSWAGEN PERFORMANCE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 554 VOLVO . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 555-557 WISCONSIN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 558

ACURA ACURA ENGINE INDEX Engine Disp. 1590cc (1.6)......... 97 1590cc (1.6)..... 1668cc (1.7)......... 1668cc (1.7)......... 1678cc (1.7)......... 1797cc (1.8)......... 1797cc (1.8)......... 1834cc (1.8)......... 1834cc (1.8).........

Notation

VIN

Cyl.

DOHC (D16A1) VTEC (D16Y8) D17A2 (D17A2) DOHC (B17A1) DOHC VTEC (B18C1) DOHC VTEC (B18C5) DOHC (B18A1) DOHC (B18B1)

L4 L4 L4 L4 L4 L4 L4 L4 L4

Year Line Engine Disp. 86-89 97-00 01-03 04-05 92-93 94-01 97-01 90-93 94-01

1 1 2 2 3 4 4 3 3

Notation

1998cc (2.0)......... 1998cc (2.0)......... 2156cc (2.2)......... 2254cc (2.3)......... 2354cc (2.4)......... 2494cc (2.5)......... 2675cc (2.7)......... 3165cc (3.2)......... 3494cc (3.5).........

VIN

Cyl.

V X

L4 L4 L4 L4 L4 V6 V6 V6 V6

DOHC VTEC (K20A2) DOHC IVTEC (K20A3) (F22B1) (F23A1) DOHC VTEC (K24A2) DOHC (C25A1) DOHC (C27A1) Isuzu Eng. (6VD1) Isuzu Eng. (6VE1)

Year Line 02-04 02-06 97-97 98-99 04-06 86-87 87-90 96-97 98-99

5 6 7 8 5 9 9 10 10

ACURA MODEL INDEX Model

CID

CL EL

INTEGRA - GS INTEGRA - GSR INTEGRA - LS INTEGRA - RS INTEGRA - SE

Liter

2156 2254 1590 1668 1668 1834 1678 1797 1590 1834 1590 1834 1590

2.2 2.3 1.6 1.7 1.7 1.8 1.7 1.8 1.6 1.8 1.6 1.8 1.6

Description

VTEC D17A2 DOHC DOHC DOHC VTEC DOHC DOHC DOHC DOHC DOHC

Years

Model

97 98-99 97-00 04-05 01-03 90-01 92-93 94-01 86-89 90-01 86-89 90-98 88

CID

INTEGRA - SPECIAL EDITION LS INTEGRA - SPECIAL EDITION INTEGRA - TYPE-R LEGEND LEGEND - L LEGEND - LS RSX RSX - S SLX TSX

Type and Location

Standard Shaft Size

Max. Bearing Thickness

Housing Bore

ENGINE

VIN CYL

1590cc (1.6) DOHC (D16A1) 97 1590cc (1.6) VTEC (D16Y8)

L4 L4

Vertical Oil Clearance

Max. Overall Length

Bore x Stroke

Material Code

Liter

Description

Years

1590

1.6 DOHC

1834 1797 2494 2675 2494 2675 2675 1998 1998 3165 3494 2354

1.8 1.8 2.5 2.7 2.5 2.7 2.7 2.0 2.0 3.2 3.5 2.4

95-96 97-01 86-87 87-90 87 87-90 87-90 02-06 02-04 96-97 98-99 04-06

Qty. Set

DOHC DOHC VTEC DOHC DOHC DOHC DOHC DOHC DOHC IVTEC DOHC VTEC Isuzu Eng. Isuzu Eng. DOHC VTEC

Bearing Shell No.

Engine Set No. Sizes Available

TORQUE SETTINGS

75mm x 90mm 75mm x 90mm

Connecting Rod 23 ft.lbs/32 Nm Main Bearing 40 ft.lbs/55 Nm (1986-87 engines) Main Bearing 46 ft.lbs/63 Nm (1988-89 engines) Main Bearing 18 ft.lbs/25 Nm (Step 1 - D16Y8 engines) Main Bearing 38 ft.lbs/53 Nm (Step 2 - D16Y8 engines)

Rod

Main 1-5

44.980/1.7709 45.000/1.7717

48.000/1.8898 48.020/1.8905

1.504/0.0592 .020/.0008 .038/.0015

18.50/0.728

54.980/2.1646 55.000/2.1654

59.000/2.3228 59.020/2.3236

2.007/0.0790 .005/.0002 .072/.0028

20.00/0.787

Thrust 4

61.250/2.4114 81.750/3.2185 61.500/2.4213 82.000/3.2283 Note: Set includes two pieces, use on No. 4 position. Required with 5M1957 main set.

ENGINE

VIN CYL

1668cc (1.7) D17A2 1668cc (1.7) (D17A2)

L4 L4

2.50/0.098

F780

F817

Bore x Stroke

TORQUE SETTINGS

75mm x 94.4mm 75mm x 94.4mm

Connecting Rod 24 ft.lbs Main Bearing 18 ft.lbs Step 1 Main Bearing 38 ft.lbs Step 2

4B1956

1956 IH

Std. .25 .50 .75 1.0

1957 IH

Std. .25 .50 .75 1.0

1957T IH

5M1957

1T1957 Std.

Rod

Main 1-5 Thrust 4

44.976/1.7707 45.000/1.7717

48.000/1.8898 48.024/1.8907

1.502/0.0591 .018/.0007 .042/.0017

15.50/0.610

54.980/2.1646 55.000/2.1654

59.000/2.3228 59.020/2.3236

2.007/0.0790 .005/.0002 .072/.0028

20.00/0.787

61.250/2.4114 61.500/2.4213

81.750/3.2185 82.000/3.2283

2.50/0.098

F780

F817

4B1980

1980 IH

Std. .25 .50

1957 IH

Std. .25 .50 .75 1.0

1957T IH

5M1957

1T1957 Std.

ACURA Engine Set No. Sizes Available

Type and Location

Standard Shaft Size

ENGINE

Housing Bore

VIN CYL

1678cc (1.7) DOHC (B17A1) 1834cc (1.8) DOHC (B18A1) 1834cc (1.8) DOHC (B18B1)

L4 L4 L4

Max. Bearing Thickness

Vertical Oil Clearance

Bore x Stroke 81mm x 81mm 81mm x 89mm 81mm x 89mm

Max. Overall Length

Material Code

Qty. Set

Bearing Shell No.

TORQUE SETTINGS Connecting Rod 14 ft.lbs/20 Nm Stage 1 (B17A1 eng. only)

Connecting Rod 23 ft.lbs/32 Nm Stage 2 (B17A1 eng. only)

Main Bearing 56 ft.lbs/76 Nm (B17A1 eng. only) Connecting Rod 30 ft.lbs/41Nm (B18A1 engines only) Main Bearing 56 ft.lbs/76 Nm (B18A1 engines only) Connecting Rod 15 ft.lbs/20 Nm Stage 1 (B18B1 eng. only)

Connecting Rod 24 ft.lbs/33 Nm Stage 2 (B18B1 eng. only)

Main Bearing 22 ft.lbs/30 Nm Stage 1 (B18B1 eng. only)

Main Bearing 58 ft.lbs/79 Nm Stage 2 (B18B1 eng. only) Rod

4B1946 Std. .25 .50 .75 1.0

5M1959

Main 1-5

Std. .25 .50 .75

1T1957 Std.

44.980/1.7709 45.000/1.7717

48.000/1.8898 48.024/1.8907

1.504/0.0592

19.50/0.768

F780

1946 IH

54.980/2.1646 55.000/2.1654

59.000/2.3228 59.020/2.3236

2.007/0.0790

20.00/0.787

F780

1959 U/L

2.50/0.098

F817

1957T IH

Thrust 4

61.250/2.4114 81.750/3.2185 61.500/2.4213 82.000/3.2283 Note: Set includes two pieces, use on No. 4 position. Required with 5M1959 main set.

ENGINE

VIN CYL

1797cc (1.8) DOHC VTEC (B18C1) 1797cc (1.8) DOHC VTEC (B18C5)

4B1925 Std. .25 .50 .75

5M1959

Rod - for VTEC engines from 1994 on. 44.980/1.7709 48.000/1.8898 45.000/1.7717 48.024/1.8907 Main 1-5

Std. .25 .50 .75

1T1957 Std.

L4 L4

54.980/2.1646 55.000/2.1654

59.000/2.3228 59.020/2.3236

Bore x Stroke 81mm x 87.2mm 81mm x 87.2mm

TORQUE SETTINGS Connecting Rod 15 ft.lbs/20 Nm Stage 1 Connecting Rod 33 ft.lbs/45 Nm Stage 2 Main Bearing 22 ft.lbs/30 Nm Stage 1 (All bolts) Main Bearing 49 ft.lbs/66 Nm Stage 2 (Bolts #2, 3 & 4) Main Bearing 56 ft.lbs/76 Nm Stage 2 (Bolts #1 & 5)

1.502/0.0591 .032/.0013 .050/.0020

17.50/0.689

F780

1925 IH

2.007/0.0790

20.00/0.787

F780

1959 U/L

2.50/0.098

F817

1957T IH

Thrust 4

61.250/2.4114 81.750/3.2185 61.500/2.4213 82.000/3.2283 Note: Set includes two pieces, use on No. 4 position. Required with 5M1959 main set.

ENGINE

VIN CYL

1998cc (2.0) DOHC VTEC (K20A2) 2354cc (2.4) DOHC VTEC (K24A2)

L4 L4

Bore x Stroke 86mm x 86mm 87mm x 99mm

TORQUE SETTINGS Connecting Rod Main Bearing 22 ft.lbs/30 Nm + 56 deg

Rod

4B1972H

47.980/1.8890 48.000/1.8898

Std. .025 .25 .50

4B1972HX Std.

5M1959H Std. .025 .25

5M1959HX Std.

51.004/2.0080 51.024/2.0088

1.500/0.0591 .020/.0008 .055/.0022

15.40/0.606

F781

Rod - Bearings are .0005" thinner per half to give .001" extra clearance for standard sized cranks. 47.980/1.8890 51.004/2.0080 1.487/0.0585 .030/.0012 15.40/0.606 F781 8 48.000/1.8898 51.024/2.0088 .090/.0035 Main 1-5

54.980/2.1646 55.000/2.1654

59.000/2.3228 59.020/2.3236

2.002/0.0788

20.00/0.787

F780

Main - Bearings are .0005" thinner per half to give .001" extra clearance for standard sized cranks. 1-5 54.980/2.1646 59.000/2.3228 1.989/0.0783 20.00/0.787 F780 10 55.000/2.1654 59.020/2.3236

1972H IH 1972HX IH 1959H U/L 1959HX U/L

ACURA Type and Location

Standard Shaft Size

Max. Bearing Thickness

Housing Bore

Vertical Oil Clearance

Max. Overall Length

Material Code

Qty. Set

Bearing Shell No.

Engine Set No. Sizes Available

(Contâ&#x20AC;&#x2122;d.) Thrust 4

61.250/2.4114 81.750/3.2185 61.500/2.4213 82.000/3.2283 Set includes two pieces. Required with 5M1959H/HX main set.

ENGINE

VIN CYL

1998cc (2.0) DOHC IVTEC (K20A3)

2.50/0.098

Bore x Stroke 86mm x 86mm

F817

1957T IH

1T1957 Std.

TORQUE SETTINGS

Connecting Rod 14 ft.lbs + 90 deg Main Bearing

Rod 44.976/1.7707 45.000/1.7717

48.000/1.8898 48.024/1.8907

1.502/0.0591 .032/.0013 .050/.0020

15.50/0.610

F781

Rod - Bearings are .0005" thinner per half to give .001" extra clearance for standard sized cranks. 44.976/1.7707 48.000/1.8898 1.489/0.0586 .046/.0018 15.50/0.610 F781 8 45.000/1.7717 48.024/1.8907 .063/.0025 Main 1-5

54.980/2.1646 55.000/2.1654

59.000/2.3228 59.020/2.3236

2.002/0.0788

20.00/0.787

F780

Main - Bearings are .0005" thinner per half to give .001" extra clearance for standard sized cranks. 1-5 54.980/2.1646 59.000/2.3228 1.989/0.0783 20.00/0.787 F780 10 55.000/2.1654 59.020/2.3236 Thrust 4

61.250/2.4114 81.750/3.2185 61.500/2.4213 82.000/3.2283 Set includes two pieces. Required with 5M1959H/HX main set.

ENGINE

VIN CYL

2156cc (2.2) (F22B1)

2.50/0.098

Bore x Stroke 85mm x 95mm

F817

1906H IH 1906HX IH 1959H U/L

4B1906H Std. .025 .25 .50

4B1906HX Std.

5M1959H Std. .025 .25

1959HX U/L

5M1959HX

1957T IH

1T1957

Std

Std.

TORQUE SETTINGS

Connecting Rod 34 ft.lbs/46 Nm Main Bearing 52 ft.lbs/70 Nm

Rod

Main 1-5

47.955/1.8880 47.976/1.8888

51.003/2.0080 51.024/2.0088

1.504/0.0592 .020/.0008 .086/.0034

19.40/0.764

49.980/1.9677 50.000/1.9685

54.000/2.1260 54.020/2.1268

2.004/0.0789

20.00/0.787

Thrust 4

57.650/2.2697 77.600/3.0551 57.900/2.2795 77.850/3.0650 Note: Set includes two pieces, use on No. 4 position. Required with 5M1937 main set.

ENGINE

VIN CYL

2254cc (2.3) (F23A1)

2.49/0.098

Bore x Stroke 86mm x 97mm

F780

F817

4B1936

1936 IH

Std. .25 .50 .75 1.0

1937 IH

Std. .25 .50

1937T IH

5M1937

1T1937 Std.

TORQUE SETTINGS

Connecting Rod 34 ft.lbs/46 Nm Main Bearing 22 ft.lbs/30 Nm Step 1 Main Bearing 58 ft.lbs/78 Nm Step 2

Rod 44.976/1.7707 45.000/1.7717

48.000/1.8898 48.024/1.8907

1.502/0.0591 .032/.0013 .050/.0020

15.50/0.610

F781

54.980/2.1646 55.000/2.1654

59.000/2.3228 59.020/2.3236

2.007/0.0790 .005/.0002 .072/.0028

20.00/0.787

Thrust 4

61.250/2.4114 81.750/3.2185 61.500/2.4213 82.000/3.2283 Note: Set includes two pieces. Required with 5M1957 main set.

2.50/0.098

F780

F817

1906H IH 1906HX IH 1957 IH 1957T IH

4B1906H Std. .025 .25 .50

4B1906HX Std.

5M1957 Std. .25 .50 .75 1.0

1T1957 Std.

ACURA Engine Set No. Sizes Available

Type and Location

Standard Shaft Size

ENGINE

Housing Bore

VIN CYL

2494cc (2.5) DOHC (C25A1) 2675cc (2.7) DOHC (C27A1)

V6 V6

Max. Bearing Thickness

Vertical Oil Clearance

Bore x Stroke 84mm x 75mm 87mm x 75mm

Max. Overall Length

Material Code

Qty. Set

Bearing Shell No.

TORQUE SETTINGS Connecting Rod 33 ft. lbs/45 Nm (1986-90 engines) Main Bearing 29 ft.lbs/39 Nm (1986-90) (9mm bolts only)

Main Bearing 36 ft.lbs/49 Nm (1986-90) (10mm side bolts only)

Main Bearing 41 ft lbs/55 Nm (1989) (11mm bridge bolts only)

Main Bearing 48 ft lbs/65 Nm (1990) (11mm bridge bolts only)

Main Bearing 50 ft.lbs/68 Nm (1986-88) (11mm bridge bolts only) Rod

6B1935

51.981/2.0465 51.999/2.0472

Std. .25 .50 .75

4M1933 Std. .25 .50 .75

4M1934 Std. .25 .50

55.000/2.1654 55.025/2.1663

1.504/0.0592 .005/.0002 .072/.0028

Main - for engines with 2.7165" max housing bore. 63.974/2.5187 68.986/2.7160 2.505/0.0986 1,2,3,4 64.000/2.5197 69.000/2.7165

17.50/0.689

F780

1935 IH

20.00/0.787

F870

1933 U/L

Main - for engines with 2.6779" max housing bore.(Engine serial # 2001033 or lower and CA. emissions. For all other engines with serial number below #2502726). 63.976/2.5187 68.000/2.6772 2.000/0.0787 .020/.0008 20.00/0.787 F780 8 1934 1,2,3,4 64.000/2.5197 68.020/2.6779 .048/.0019 U/L Thrust

1T1934 Std.

75.250/2.9626 93.750/3.6909 75.500/2.9724 94.000/3.7008 Note: Set includes two pieces, use on No. 3 position. Required with 4M1934 main set.

ENGINE

VIN CYL

Bore x Stroke

3165cc (3.2) Isuzu Eng. (6VD1) 3494cc (3.5) Isuzu Eng. (6VE1)

V X

93.4mm x 77mm 93.4mm x 85mm

V6 V6

2.50/0.098

F817

1934T IH

TORQUE SETTINGS Connecting Rod 40 ft. lbs/54 Nm Main Bearing 29 ft.lbs/39 Nm

Rod

6B1840 Std. .25 .50 .75 1.0

4M1842

Main 1,4

Std. .25 .50 .75 1.0 2,3

53.922/2.1229 53.937/2.1235

56.982/2.2434 57.000/2.2441

1.513/0.0596 .019/.0007 .078/.0031

17.12/0.674

F780

1840 IH

63.919/2.5165 63.932/2.5170

68.979/2.7157 68.999/2.7165

2.527/0.0995 .025/.0010 .084/.0033

18.50/0.728

F780

1842 IH

63.919/2.5165 63.932/2.5170

68.979/2.7157 68.999/2.7165

2.527/0.0995 .025/.0010 .084/.0033

16.50/0.650

F780

1843 U/L

1.95/0.077

F817

1842T IH

Thrust

1T1842 Std.

71.000/2.7953 97.550/3.8405 71.250/2.8051 97.800/3.8504 Note: Set includes two pieces. Required with 4M1842 main set.

ACURA PERFORMANCE ACURA PERFORMANCE ENGINE INDEX Engine Disp. 1590cc (1.6)......... 1590cc (1.6)......... 1678cc (1.7)......... 1797cc (1.8)......... 1797cc (1.8)......... 1834cc (1.8)......... Type and Location

Notation

VIN

Cyl.

(D16A1) VTEC (D16Y8) (B17A1) VTEC (B18C1) VTEC (B18C5) (B18A1)

Standard Shaft Size

L4 L4 L4 L4 L4 L4 Max. Bearing Thickness

Housing Bore

ENGINE

VIN CYL

1590cc (1.6) (D16A1) 1590cc (1.6) VTEC (D16Y8)

Rod - Race Series. 44.980/1.7709 45.000/1.7717

L4 L4

48.000/1.8898 48.020/1.8905

Year Line Engine Disp. 86-89 97-00 92-93 94-01 97-01 90-93

1 1 2 3 3 2

Notation

1834cc (1.8)......... 1998cc (2.0)......... 1998cc (2.0)......... 2254cc (2.3)......... 2354cc (2.4).........

Vertical Oil Clearance

Max. Overall Length

Bore x Stroke 75mm x 90mm 75mm x 90mm

1.499/0.0590 .020/.0008 .038/.0015

VIN

(B18B1) VTEC (K20A2) IVTEC (K20A3) (F23A1) VTEC (K24A2)

Material Code

Qty. Set

L4 L4 L4 L4 L4

Bearing Shell No.

59.000/2.3228 59.020/2.3236

20.00/0.787

Thrust 4

61.250/2.4114 81.750/3.2185 2.50/0.098 61.500/2.4213 82.000/3.2283 Note: Set includes two pieces, use on No. 4 position. Required with 5M1957H/HX main set.

VIN CYL

1678cc (1.7) (B17A1) 1834cc (1.8) (B18A1) 1834cc (1.8) (B18B1)

Rod - Race Series. 44.980/1.7709 45.000/1.7717

L4 L4 L4

48.000/1.8898 48.024/1.8907

Bore x Stroke 81mm x 81mm 81mm x 89mm 81mm x 89mm

1.504/0.0592

F781

1956H IH

F780

1957H IH

F817

1957T IH

59.000/2.3228 59.020/2.3236

20.00/0.787

61.250/2.4114 81.750/3.2185 2.50/0.098 61.500/2.4213 82.000/3.2283 Note: Set includes two pieces, use on No. 4 position. Required with 5M1959H/HX main set.

4B1956HX Std.

5M1957H Std. .025 .25

5M1957HX Std.

1T1957 Std.

F781

1946H IH

F780

1959H U/L

Main - Race Series. Bearings are .0005" thinner per half to give .001" extra clearance for standard sized crankshafts. 54.980/2.1646 59.000/2.3228 1.989/0.0783 20.00/0.787 F780 10 1959HX 1-5 55.000/2.1654 59.020/2.3236 U/L Thrust 4

4B1956H Std. .025 .25

TORQUE SETTINGS

19.50/0.768

2.002/0.0788

Engine Set No. Sizes Available

Connecting Rod 14 ft.lbs/20 Nm Stage 1 (B17A1 eng. only) Connecting Rod 23 ft.lbs/32 Nm Stage 2 (B17A1 eng. only) Main Bearing 56 ft.lbs/76 Nm (B17A1 eng. only) Connecting Rod 30 ft.lbs/41Nm (B18A1 engines only) Main Bearing 56 ft.lbs/76 Nm (B18A1 engines only) Connecting Rod 15 ft.lbs/20 Nm Stage 1 (B18B1 eng. only) Connecting Rod 24 ft.lbs/33 Nm Stage 2 (B18B1 eng. only) Main Bearing 22 ft.lbs/30 Nm Stage 1 (B18B1 eng. only) Main Bearing 58 ft.lbs/79 Nm Stage 2 (B18B1 eng. only)

Rod - Race Series. Bearings are .0005" thinner per half to give .001" extra clearance for standard sized crankshafts. 44.980/1.7709 48.000/1.8898 1.491/0.0587 19.50/0.768 F781 8 1946HX 45.000/1.7717 48.024/1.8907 IH Main - Race Series. 1-5 54.980/2.1646 55.000/2.1654

04-04

Main - Race Series. Bearings are .0005" thinner per half to give .001" extra clearance for standard sized crankshafts. 54.980/2.1646 59.000/2.3228 1.989/0.0783 .030/.0012 20.00/0.787 F780 10 1957HX 1-5 55.000/2.1654 59.020/2.3236 .097/.0038 IH

ENGINE

2 4 5 6 4

18.50/0.728

2.002/0.0788 .005/.0002 .072/.0028

Year Line 94-01 02-04 02-06

TORQUE SETTINGS

Rod - Race Series. Bearings are .0005" thinner per half to give .001" extra clearance for standard sized crankshafts. 44.980/1.7709 48.000/1.8898 1.486/0.0585 .045/.0018 18.50/0.728 F781 8 1956HX 45.000/1.7717 48.020/1.8905 .063/.0025 IH Main - Race Series. 1-5 54.980/2.1646 55.000/2.1654

Cyl.

F817

1957T IH

4B1946H Std. .025 .25

4B1946HX Std.

5M1959H Std. .025 .25

5M1959HX Std.

1T1957 Std.

ACURA PERFORMANCE Engine Set No. Sizes Available

Type and Location

Standard Shaft Size

ENGINE

VIN CYL

1797cc (1.8) VTEC (B18C1) 1797cc (1.8) VTEC (B18C5)

4B1925H Std. .025 .25

4B1925HX Std.

5M1959H Std. .025 .25

5M1959HX Std.

1T1957 Std.

Rod - Race Series. 44.976/1.7707 45.000/1.7717

Main - Race Series. 1-5 54.980/2.1646 55.000/2.1654

4B1972HX Std.

5M1959H Std. .025 .25

5M1959HX Std.

1T1957 Std.

4B1906HX Std.

5M1959H Std. .025 .25

5M1959HX Std.

Material Code

Qty. Set

Bearing Shell No.

1.502/0.0591 .032/.0013 .050/.0020

17.50/0.689

59.000/2.3228 59.020/2.3236

2.002/0.0788

20.00/0.787

61.250/2.4114 81.750/3.2185 2.50/0.098 61.500/2.4213 82.000/3.2283 Note: Set includes two pieces, use on No. 4 position. Required with 5M1959H/HX main set.

VIN CYL

Rod - Race Series. 47.980/1.8890 48.000/1.8898

F781

1925H IH

F780

1959H U/L

L4 L4

51.004/2.0080 51.024/2.0088

Bore x Stroke 86mm x 86mm 87mm x 99mm

F817

1957T IH

TORQUE SETTINGS Connecting Rod Main Bearing 22 ft.lbs/30 Nm + 56 deg

1.500/0.0591 .020/.0008 .055/.0022

15.40/0.606

F781

1972H IH

Rod - Race Series. Bearings are .0005" thinner per half to give .001" extra clearance for standard sized cranks. 47.980/1.8890 51.004/2.0080 1.487/0.0585 .030/.0012 15.40/0.606 F781 8 1972HX 48.000/1.8898 51.024/2.0088 .090/.0035 IH Main - Race Series. 54.980/2.1646 1-5 55.000/2.1654

59.000/2.3228 59.020/2.3236

2.002/0.0788

20.00/0.787

F780

1959H U/L

Main - Race Series. Bearings are .0005" thinner per half to give .001" extra clearance for standard sized cranks. 1-5 54.980/2.1646 59.000/2.3228 1.989/0.0783 20.00/0.787 F780 10 1959HX 55.000/2.1654 59.020/2.3236 U/L Thrust 4

61.250/2.4114 81.750/3.2185 61.500/2.4213 82.000/3.2283 Set includes two pieces. Required with 5M1959H/HX main set.

VIN CYL

1998cc (2.0) IVTEC (K20A3)

Std. .025 .25 .50

Bore x Stroke 81mm x 87.2mm 81mm x 87.2mm

Max. Overall Length

Thrust 4

ENGINE

4B1906H

48.000/1.8898 (nominal)

Vertical Oil Clearance

1998cc (2.0) VTEC (K20A2) 2354cc (2.4) VTEC (K24A2)

Std. .025 .25 .50

L4 L4

Max. Bearing Thickness

Rod - Race Series. Bearings are .0005" thinner per half to give .001" extra clearance for standard sized crankshafts. 44.976/1.7707 48.000/1.8898 1.489/0.0586 .057/.0022 17.50/0.689 F781 8 1925HX 45.000/1.7717 (nominal) .075/.0030 IH

ENGINE

4B1972H

Housing Bore

Rod - Race Series. 44.976/1.7707 45.000/1.7717

48.000/1.8898 48.024/1.8907

Bore x Stroke 86mm x 86mm

2.50/0.098

F817

1957T IH

TORQUE SETTINGS Connecting Rod 14 ft.lbs + 90 deg

1.502/0.0591 .032/.0013 .050/.0020

15.50/0.610

F781

1906H IH

Rod - Race Series. Bearings are .0005" thinner per half to give .001" extra clearance for standard sized cranks. 44.976/1.7707 48.000/1.8898 1.489/0.0586 .046/.0018 15.50/0.610 F781 8 1906HX 45.000/1.7717 48.024/1.8907 .063/.0025 IH Main - Race Series. 54.980/2.1646 1-5 55.000/2.1654

59.000/2.3228 59.020/2.3236

2.002/0.0788

20.00/0.787

F780

1959H U/L

ACURA PERFORMANCE Type and Location

Standard Shaft Size

Max. Bearing Thickness

Housing Bore

Vertical Oil Clearance

Max. Overall Length

Material Code

Qty. Set

Bearing Shell No.

Engine Set No. Sizes Available

(Contâ&#x20AC;&#x2122;d.) Thrust 4

61.250/2.4114 81.750/3.2185 61.500/2.4213 82.000/3.2283 Set includes two pieces. Required with 5M1959H/HX main set.

ENGINE

VIN CYL

2254cc (2.3) (F23A1)

Rod - Race Series. 44.976/1.7707 45.000/1.7717

48.000/1.8898 48.024/1.8907

2.50/0.098

Bore x Stroke 86mm x 97mm

1.502/0.0591 .032/.0013 .050/.0020

F817

1957T IH

59.000/2.3228 59.020/2.3236

20.00/0.787

F781

1906H IH

F780

1957H IH

Main - Race Series. Bearings are .0005" thinner per half to give .001" extra clearance for standard sized cranks. 54.980/2.1646 59.000/2.3228 1.989/0.0783 .030/.0012 20.00/0.787 F780 10 1957HX 1-5 55.000/2.1654 59.020/2.3236 .097/.0038 IH Thrust 4

61.250/2.4114 81.750/3.2185 61.500/2.4213 82.000/3.2283 Note: Set includes two pieces. Required with 5M1957H/HX main set.

2.50/0.098

Std.

Connecting Rod 34 ft.lbs/46 Nm Main Bearing 22 ft.lbs/30 Nm Step 1 Main Bearing 58 ft.lbs/78 Nm Step 2

15.50/0.610

2.002/0.0788 .005/.0002 .072/.0028

1T1957

TORQUE SETTINGS

F817

1957T IH

4B1906H Std. .025 .25 .50

4B1906HX Std.

5M1957H Std. .025 .25

5M1957HX Std.

1T1957 Std.

ALFA ROMEO ALFA ROMEO ENGINE INDEX Engine Disp.

Notation

1570cc (1.6)......... 1779cc (1.8).........

VIN

SOHC DOHC

Cyl. L4 L4

Year Line Engine Disp. 62-74 68-77

1 1

Notation

120 1961cc (2.0)... 120 1961cc (2.0)...

DOHC DOHC

VIN

Cyl.

L4 L4

Year Line 72-90 91-94

1 1

ALFA ROMEO MODEL INDEX Model

CID

Liter

120 120

1961 1961 1779 1961 1779 1961

2.0 2.0 1.8 2.0 1.8 2.0

ALFETTA - GT ALFETTA - SPORT BERLINA GT VELOCE SPIDER

120 120

Engine Set No. Sizes Available

Type and Location

Description DOHC DOHC DOHC DOHC DOHC DOHC

Standard Shaft Size

ENGINE

Housing Bore

VIN CYL

1570cc (1.6) SOHC 1779cc (1.8) DOHC 120 1961cc (2.0) DOHC 120 1961cc (2.0) DOHC

Years 75-77 75-77 69-71 72-74 69-71 91-94

L4 L4 L4 L4

Model

CID

SPIDER - GRADUATE SPIDER QUADRIFOGLIO SPIDER - VELOCE SPORT SPRINT - VELOCE

120

1961

2.0 DOHC

85-90

120 120 120 120

1961 1961 1961 1961

2.0 2.0 2.0 2.0

86-90 72-94 78-79 77-79

Max. Bearing Thickness

Vertical Oil Clearance

Bore x Stroke 78 mm x 82 mm 80 mm x 88.5mm 84 mm x 88.5mm 84 mm x 88.5mm

Max. Overall Length

Liter

Description

DOHC DOHC DOHC DOHC

Material Code

Qty. Set

Years

Bearing Shell No.

TORQUE SETTINGS Connecting Rod 53-60 ft. lbs/72-81 Nm Main Bearing 51-54 ft.lbs/69-73 Nm

Rod

4B1110 Std. 10 20 30

5M1112

Main 1,3,5

Std. 10 20 30 2,4

49.987/1.9680 50.000/1.9685

53.693/2.1139 53.708/2.1145

1.836/0.0723 .021/.0008 .075/.0030

23.44/0.923

F780

1110 IH

59.959/2.3606 59.972/2.3611

63.657/2.5062 63.675/2.5069

1.829/0.0720 .027/.0011 .084/.0033

25.52/1.005

F780

1112 IH

59.959/2.3606 59.972/2.3611

63.657/2.5062 63.675/2.5069

1.829/0.0720 .027/.0011 .084/.0033

18.36/0.723

F780

1113 IH

2.36/0.093

4242T U/L

Thrust

2T4242 Std.

65.786/2.5900 82.423/3.2450 66.040/2.6000 82.677/3.2550 Note: Set includes two pieces. Required with 5M1112 main set.

AM GENERAL AM GENERAL ENGINE INDEX Engine Disp.

Notation

VIN

Cyl.

Diesel

379 (6.2) ...............

Year Line Engine Disp. 92-94

Notation

VIN

Cyl.

Diesel

395 (6.5) ...............

Year Line 94-95

AM GENERAL MODEL INDEX Model HUMMER - 2 DOOR RECRUIT

CID 379 395

HUMMER - 2 PASSENGER HARDTOP ENLARGED 379 395 HUMMER - 4 PASSENGER HARDTOP 379 395 Type and Location

Standard Shaft Size

Liter

Description

Years

6.2 6.5

92-94 94

6.2 6.5

92-94 94-95

Model

CID

HUMMER - 4 PASSENGER OPEN TOP HUMMER - 4 PASSENGER WAGON HUMMER - OPEN BODY RECRUIT

6.2 6.5

92-93 94-95 Max. Bearing Thickness

Housing Bore

Vertical Oil Clearance

Max. Overall Length

ENGINE

VIN CYL

Bore x Stroke

379 (6.2) Diesel 395 (6.5) Diesel

X Y

3.98 x 3.82 4.06 x 3.82

V8 V8

Liter

Description

Years

379 395

6.2 6.5

92-94 94-95

379 395

6.2 6.5

92-94 94-95

379 395

6.2 6.5

92-93 94

Material Code

Qty. Set

Bearing Shell No.

Engine Set No. Sizes Available

TORQUE SETTINGS

Connecting Rod 48 ft. lbs Main Bearing 100 ft.lbs (outer bolt - 6.2 diesel engine only) Main Bearing 110 ft.lbs (inner bolt) Main Bearing 111 ft.lbs (outer bolt - 6.5 diesel engine only)

Rod 60.914/2.3982 60.940/2.3992

64.125/2.5246 64.150/2.5256

1.570/0.0618 .048/.0019 .120/.0047

Main 1,2,4

74.917/2.9495 79.825/3.1427 2.425/0.0955 74.940/2.9504 79.850/3.1437 3 (Fl) 74.917/2.9495 79.825/3.1427 2.425/0.0955 74.940/2.9504 79.850/3.1437 5 74.912/2.9493 79.825/3.1427 2.425/0.0955 74.937/2.9503 79.850/3.1437 Overflange length remains constant for standard and undersizes. Cam 1

22.91/0.902

.040/.0016 .114/.0045 .040/.0016 .114/.0045 .045/.0018 .119/.0047

22.78/0.897

F780

1292 IH 2087 U/L 2089 U/L 2088 U/L

28.70/1.130

F780

35.33/1.391

F780

2.030/0.0798

22.86/0.900

F23

GM-7-1

1.910/0.0753

19.81/0.780

F23

GM-7-2

1.790/0.0703

19.81/0.780

F23

GM-7-3

54.976/2.1644 55.024/2.1663 54.976/2.1644 55.024/2.1663 54.976/2.1644 55.024/2.1663

59.106/2.3270 59.157/2.3290 58.877/2.3180 58.928/2.3200 58.623/2.3080 58.674/2.3100

54.976/2.1644 55.024/2.1663

58.369/2.2980 58.420/2.3000

1.660/0.0653

19.81/0.780

F23

GM-7-4

50.975/2.0069 51.026/2.0089

54.381/2.1410 54.432/2.1430

1.660/0.0655

19.81/0.780

F23

GM-7-5

Small End - semi-finished - .020" bore stock allowance. 31.026/1.2215 33.139/1.3047 (Nominal) (Finished ID Size)

25.40/1.000

F100

3864Y20

2 3

8B1286P Std. .025 .25 .50 .75

5M2091P Std. .025 .25 .50 .75 1.0

5C1199S Std.

RB3864Y20 Semi

AMERICAN MOTORS AMERICAN MOTORS ENGINE INDEX Engine Disp. 73 1198cc ............. 91 1489cc ............. 150 (2.5) ............... 151 (2.5) ............... 199 (3.3) ............... 199 (3.3) ............... 232 (3.8) ............... 232 (3.8) ............... 232 (3.8) ............... 232 (3.8) ............... 232 (3.8) ............... 258 (4.2) ...............

Notation

VIN

Morris Eng. Morris Eng. U B

Pontiac Eng.

A B C E G A

Cyl. L4 L4 L4 L4 L6 L6 L6 L6 L6 L6 L6 L6

Year Line Engine Disp. 54-55 56-61 83-84 80-83 65-67 68-70 64-67 68-69 68-69 70-79 70-70 71-79

1 1 2 3 4 4 4 4 4 4 4 4

Notation

258 (4.2) ............... 290 (4.8) ............... 290 (4.8) ............... 290 (4.8) ............... 304 (5.0) ............... 343 (5.6) ............... 343 (5.6) ............... 343 (5.6) ............... 360 (5.9) ............... 360 (5.9) ............... 390 (6.4) ............... 401 (6.6) ...............

VIN

Cyl.

L6 V8 V8 V8 V8 V8 V8 V8 V8 V8 V8 V8

M N H S T N P X Z

Year Line 76-88 66-67 68-69 68-69 70-79 67-67 68-69 68-69 70-78 70-76 68-70 71-76

4 5 5 5 5 5 5 5 5 5 6 6

AMERICAN MOTORS MODEL INDEX Model

CID

AMBASSADOR

199 232 290 304 343 360 390

3.3 3.8 4.8 5.0 5.6 5.9 6.4

66-67 65-70 68-69 70 67-69 70 68-70

304 360 401 232 258 290 304 343 360 390 401 290 304 343 360 390 401 199 232 290 343 199 232 290 232 290 258 290 304 343 360 390 401 199 232 151 232 258 304 151 258 151 258 150 151 258 150 151 258 151 258

5.0 5.9 6.6 3.8 4.2 4.8 5.0 5.6 5.9 6.4 6.6 4.8 5.0 5.6 5.9 6.4 6.6 3.3 3.8 4.8 5.6 3.3 3.8 4.8 3.8 4.8 4.2 4.8 5.0 5.6 5.9 6.4 6.6 3.3 3.8 2.5 3.8 4.2 5.0 2.5 4.2 2.5 4.2 2.5 2.5 4.2 2.5 2.5 4.2 2.5 4.2

71-74 71-74 71-74 68-69 71 68-69 70-71 68-69 70-71 69-70 71 68-69 70-72 68-69 70-72 68-70 71-72 66-68 64-68 67-68 67 68 68 68 68 68 78-80 68-69 72-79 68-69 70-74 68-70 71-74 65-66 64-65 80-82 78-79 78-83 78-79 80-82 80-83 80-82 80-83 83-84 81-83 80-88 83 83 83 81 81

151 258

2.5 Pontiac Eng. 4.2

AMBASSADOR BROUGHAM AMBASSADOR - DPL

AMBASSADOR - SST

AMERICAN

AMERICAN - 440 AMERICAN - ROGUE AMX

CLASSIC CONCORD

CONCORD - DL CONCORD - LIMITED EAGLE EAGLE - DL SX4 EAGLE - DL-50 EAGLE - DL-50 KAMMBACK

Liter

Description

Years

Model EAGLE - DL-50 SX4 EAGLE - KAMMBACK EAGLE - LIMITED EAGLE - SX4

Pontiac Eng.

Pontiac Eng. Pontiac Eng. Pontiac Eng. Pontiac Eng. Pontiac Eng.

GREMLIN

GREMLIN - CUSTOM HORNET

HORNET SPORTABOUT

HORNET - SST

JAVELIN

JAVELIN - SST

MARLIN

MATADOR

MATADOR BROUGHAM

82 82

CID

Liter

Description Pontiac Eng.

Years

151 258 151 258 150 151 258 150 151 258 199 232 258 304 232 258 304 199 232 258 304 360

2.5 4.2 2.5 4.2 2.5 2.5 4.2 2.5 2.5 4.2 3.3 3.8 4.2 5.0 3.8 4.2 5.0 3.3 3.8 4.2 5.0 5.9

232 258 304 360 199 232 258 304 360 232 258 290 304 343 360 390 401 232 258 290 304 343 360 390 401 199 232 290 343 232 258 304 360 401

3.8 4.2 5.0 5.9 3.3 3.8 4.2 5.0 5.9 3.8 4.2 4.8 5.0 5.6 5.9 6.4 6.6 3.8 4.2 4.8 5.0 5.6 5.9 6.4 6.6 3.3 3.8 4.8 5.6 3.8 4.2 5.0 5.9 6.6

71-77 71-77 71-77 72-74 70 70-72 71-72 70-72 71-72 68-74 71-74 68-69 70-74 68-69 70-74 68-70 71-74 68-72 71-72 68-69 70-72 68-69 70-72 68-70 71-72 66-67 65-67 67 67 71-74 71-78 71-77 71-78 71-76

232 258 304 360

3.8 4.2 5.0 5.9

74 74 74 74

Pontiac Eng. Pontiac Eng. Pontiac Eng.

81-82 81-82 82 82 83-84 81-83 80-87 83 81-83 81-83 70 70-78 71-78 72-75 76-78 76-78 76 70 70-77 71-77 70-77 71-74

AMERICAN MOTORS AMERICAN MOTORS MODEL INDEX (Contâ&#x20AC;&#x2122;d.) Model MATADOR BROUGHAM MATADOR - X PACER PACER - DL PACER - LIMITED RAMBLER RAMBLER - 440 RAMBLER - ROGUE REBEL

REBEL - 550 Type and Location

CID

Liter

Description

Years

Model

CID

REBEL - 550 401 304 360 401 232 258 304 258 258 199 232 290 199 232 290 232 290 199 232 290 304 343 360 232

Standard Shaft Size

ENGINE

6.6 5.0 5.9 6.6 3.8 4.2 5.0 4.2 4.2 3.3 3.8 4.8 3.3 3.8 4.8 3.8 4.8 3.3 3.8 4.8 5.0 5.6 5.9 3.8

74 74 74 74 75-78 75-79 78-79 80 80 69 69 69 69 69 69 69 69 67 67-70 67-69 70 67-69 70 68 Max. Bearing Thickness

Housing Bore

VIN CYL

73 1198cc Morris Eng. 91 1489cc Morris Eng.

L4 L4

REBEL - 770 REBEL - SST

ROGUE SPIRIT

SPIRIT - DL SPIRIT - GT SPIRIT - LIMITED

Vertical Oil Clearance

Max. Overall Length

Bore x Stroke

290 343 232 290 343 232 290 304 343 360 390 199 232 343 151 232 258 304 151 258 258 151 258

Material Code

Liter

Description

4.8 5.6 3.8 4.8 5.6 3.8 4.8 5.0 5.6 5.9 6.4 3.3 3.8 5.6 2.5 Pontiac Eng. 3.8 4.2 5.0 2.5 Pontiac Eng. 4.2 4.2 2.5 Pontiac Eng. 4.2

Qty. Set

Bearing Shell No.

Years 68 68 68 68 68 69-70 68-69 70 68-69 70 69-70 67 67 67 80-82 79 79-82 79 80-82 80-83 83 80 80

Engine Set No. Sizes Available

TORQUE SETTINGS

64.5mm x 89mm 73mm x 89mm

Connecting Rod 23-35 ft.lbs/31-47 Nm Main Bearing 70-75 ft.lbs/95-102 Nm

Rod

Main 1,2,3

47.648/1.8759 47.661/1.8764

51.333/2.0210 51.346/2.0215

1.824/0.0718 .024/.0009 .076/.0030

25.53/1.005

50.813/2.0005 50.825/2.0010

54.508/2.1460 54.521/2.1465

1.829/0.0720 .025/.0010 .076/.0030

35.05/1.380

F780

F23

4B1891

1891 IH

Std. 10 20 30 40

4302 IH

Std. 10 20 30 40

3M4302

Thrust 56.261/2.2150 69.596/2.7400 2.36/0.093 56.515/2.2250 69.850/2.7500 Note: Thrust set includes 4 pieces, use on No. 2 position. Required with 3M4302 main set. Cam 1

4302T U/L

2T4302

3C4306

45.433/1.7887 45.446/1.7892

48.641/1.9150 48.666/1.9160

1.585/0.0624 .025/.0010 .076/.0030

37.57/1.479

F23

4306

43.909/1.7287 43.922/1.7292

47.117/1.8550 47.142/1.8560

1.585/0.0624 .025/.0010 .076/.0030

28.83/1.135

F23

4307

41.217/1.6227 41.229/1.6232

44.425/1.7490 44.450/1.7500

1.585/0.0624 .025/.0010 .076/.0030

20.89/0.822

F23

4308

ENGINE

VIN CYL

Bore x Stroke

150 (2.5)

3.88 x 3.19

Std.

TORQUE SETTINGS

Connecting Rod 33 ft.lbs/45 Nm Main Bearing 80 ft.lbs/108 Nm

Rod 53.208/2.0948 53.226/2.0955

56.083/2.2080 56.096/2.2085

1.425/0.0561 .017/.0006 .074/.0029

21.26/0.837

63.470/2.4988 63.487/2.4995

68.351/2.6910 68.377/2.6920

2.421/0.0953 .022/.0008 .091/.0036

25.04/0.986

63.470/2.4988 68.351/2.6910 2.421/0.0953 .022/.0008 63.487/2.4995 68.377/2.6920 .091/.0036 Overflange length remains constant for standards and undersizes.

32.26/1.270

Main 1,2,4,5 3 (Fl)

F780

F780 F780

8 2

4B960P

1480 IH

Std. 01 10 20 30 40 50

8872 U/L

Std. 10 20 30

8873 U/L

5M1568P

AMERICAN MOTORS Engine Set No. Sizes Available

Type and Location

Material Code

Qty. Set

Bearing Shell No.

1.580/0.0620

17.65/0.695

F23

N-7-1

54.496/2.1455 54.521/2.1465

1.580/0.0620

17.65/0.695

F23

N-7-2

54.242/2.1355 54.267/2.1365 53.988/2.1255 54.013/2.1265

1.580/0.0620

17.65/0.695

F23

N-7-3

1.580/0.0620

17.65/0.695

F23

N-7-4

Housing Bore

51.549/2.0295 51.575/2.0305

54.750/2.1555 54.775/2.1565

51.295/2.0195 51.321/2.0205

51.041/2.0095 51.067/2.0105 50.787/1.9995 50.813/2.0005

Max. Bearing Thickness

Vertical Oil Clearance

(Contâ&#x20AC;&#x2122;d.) 4C549S

Cam 1

Std.

Max. Overall Length

Standard Shaft Size

ENGINE

VIN CYL

Bore x Stroke

151 (2.5) Pontiac Eng.

4.00 x 3.00

4B610A Std. 10 20 30 40

4B610AO/S2 10 20 30 40

4B610P Std. 01 10 20 30 40

4B610PO/S2 10 20 30 40

5M1733P Std. 01 10 20 30 40

5M7152P 10 20 30 40

18.84/0.742

F810

2226A IH

Rod - .002" oversize OD version of 4B610A. 50.800/2.0000 54.018/2.1267 1.722/0.0678 .015/.0006 50.813/2.0005 54.031/2.1272 (@ .010" u/size) .067/.0026

18.84/0.742

F810

9070A IH

Rod - To be superceded by 4B610A when stock exhausted. 50.800/2.0000 53.967/2.1247 1.570/0.0618 .014/.0006 50.813/2.0005 53.980/2.1252 .066/.0026

18.84/0.742

F780

2226 IH

Rod - To be superceded by 4B610AO/S2 when stock exhausted. 50.800/2.0000 54.018/2.1267 1.722/0.0678 .015/.0006 50.813/2.0005 54.031/2.1272 (@ .010" u/s) .067/.0026

18.84/0.742

F780

9070 IH

20.49/0.807

F780

25.63/1.009

F780

7132 U/L 7133 U/L

Main 1,2,3,4

58.377/2.2983 63.261/2.4906 2.426/0.0955 58.402/2.2993 63.287/2.4916 5 (Fl) 58.377/2.2983 63.261/2.4906 2.426/0.0955 58.402/2.2993 63.287/2.4916 Overflange length remains constant for standard and undersizes.

.007/.0003 .084/.0033 .007/.0003 .084/.0033

Main - Alt set to 5M1733P with +0.010" overflange length increase. * See below for dimensional information. 58.377/2.2983 63.261/2.4906 2.426/0.0955 .007/.0003 20.49/0.807 F780 8 7132 1,2,3,4 58.402/2.2993 63.287/2.4916 .084/.0033 U/L 58.377/2.2983 63.261/2.4906 58.402/2.2993 63.287/2.4916 Stock not available from fee warehouses.

.010" u/s shaft .020" u/s shaft .030" u/s shaft .040" u/s shaft

Std.

Connecting Rod 30 ft.lbs/41 Nm (except crossflow) Connecting Rod 32 ft.lbs/44 Nm (crossflow) Main Bearing 65 ft.lbs/88 Nm (except crossflow) Main Bearing 70 ft.lbs/95 Nm (crossflow)

Rod - High Strength Aluminum Silicon material. 50.800/2.0000 53.967/2.1247 1.570/0.0618 .014/.0006 50.813/2.0005 53.980/2.1252 .066/.0026

5 (Fl)

3C1030S

TORQUE SETTINGS

Cam 1,2,3

47.452/1.8682 47.478/1.8692

2.426/0.0955 .007/.0003 .084/.0033

25.88/1.019

F780

7152 U/L

CH-5-3

* DIMENSIONAL INFORMATION FOR 5M7152P Overall Width (Nominal) Increase in Width 1.019" +0.010" 1.019" +0.010" 1.019" +0.010" 1.019" +0.010"

50.775/1.9990 50.825/2.0010

1.640/0.0644

21.97/0.865

F23

AMERICAN MOTORS Type and Location

Standard Shaft Size

ENGINE 199 (3.3) 199 (3.3) 232 (3.8) 232 (3.8) 232 (3.8) 232 (3.8) 232 (3.8) 258 (4.2) 258 (4.2)

Max. Bearing Thickness

Housing Bore

VIN CYL A B C E G A C

L6 L6 L6 L6 L6 L6 L6 L6 L6

Vertical Oil Clearance

Bore x Stroke

Max. Overall Length

Material Code

Qty. Set

Bearing Shell No.

Engine Set No. Sizes Available

TORQUE SETTINGS

Connecting Rod 27-30 ft.lbs/36-41 Nm (1964-74 engines) Connecting Rod 30-35 ft.lbs/41-48 Nm (1975-88 engines) Main Bearing 75-85 ft.lbs/102-115 Nm

3.75 x 3.00 3.75 x 3.00 3.75 x 3.50 3.75 x 3.50 3.75 x 3.50 3.75 x 3.50 3.75 x 3.50 3.75 x 3.90 3.75 x 3.90

Rod 53.208/2.0948 53.226/2.0955

56.083/2.2080 56.096/2.2085

1.425/0.0561 .017/.0006 .074/.0029

21.26/0.837

63.470/2.4988 63.487/2.4995

68.351/2.6910 68.377/2.6920

2.421/0.0953 .022/.0008 .091/.0036

25.04/0.986

63.470/2.4988 68.351/2.6910 2.421/0.0953 .022/.0008 63.487/2.4995 68.377/2.6920 .091/.0036 Overflange length remains constant for standard and undersizes.

32.26/1.270

Main 1,2,4,5,6, 7 3 (Fl)

F780

F780 F780

12 2

Std. 01 10 20 30 40

8872 U/L

Std. 10 20 30 40

63.470/2.4988 68.351/2.6910 63.487/2.4995 68.377/2.6920 Stock not available from fee warehouses.

.010" u/s shaft .020" u/s shaft .030" u/s shaft .040" u/s shaft Cam 1 2 3 4

2.421/0.0953 .022/.0008 .091/.0036

32.26/1.280

F780

* DIMENSIONAL INFORMATION FOR 7M8879P Overall Width (Nominal) Increase in Width 1.280" +0.010" 1.280" +0.010" 1.280" +0.010" 1.280" +0.010"

54.750/2.1555 54.775/2.1565

1.580/0.0620

17.65/0.695

F23

N-7-1

51.295/2.0195 51.321/2.0205 51.041/2.0095 51.067/2.0105 50.787/1.9995 50.813/2.0005

54.496/2.1455 54.521/2.1465 54.242/2.1355 54.267/2.1365 53.988/2.1255 54.013/2.1265

1.580/0.0620

17.65/0.695

F23

N-7-2

1.580/0.0620

17.65/0.695

F23

N-7-3

1.580/0.0620

17.65/0.695

F23

N-7-4

290 (4.8) 290 (4.8) 290 (4.8) 304 (5.0) 343 (5.6) 343 (5.6) 343 (5.6) 360 (5.9) 360 (5.9)

S T N P

4C549S Std.

VIN CYL M N H

7M8879P 10 20 30 40

8879 U/L

51.549/2.0295 51.575/2.0305

ENGINE

7M704P

8873 U/L

Main - Alt set to 7M704P with +0.010" overflange length increase. * See below for dimensional information. F780 12 8872 1,2,4,5,6, 63.470/2.4988 68.351/2.6910 2.421/0.0953 .022/.0008 25.04/0.986 63.487/2.4995 68.377/2.6920 .091/.0036 U/L 7 3 (Fl)

6B960P

1480 IH

V8 V8 V8 V8 V8 V8 V8 V8 V8

Bore x Stroke 3.75 x 3.28 3.75 x 3.28 3.75 x 3.28 3.75 x 3.28 3.75 x 3.28 3.75 x 3.28 3.75 x 3.28 4.08 x 3.44 4.08 x 3.44

TORQUE SETTINGS

Connecting Rod 27-30 ft.lbs/36-41 Nm (1966-74 engines) Connecting Rod 30-35 ft.lbs/41-48 Nm (1975-79 engines) Main Bearing 95-105 ft.lbs/129-142 Nm (1966-79 engines)

Rod 53.208/2.0948 53.226/2.0955

56.083/2.2080 56.096/2.2085

1.425/0.0561 .017/.0007 .074/.0029

21.26/0.837

F780

1480 IH

8B960P Std. 01 10 20 30 40

AMERICAN MOTORS Engine Set No. Sizes Available

Type and Location

Standard Shaft Size

Housing Bore

Max. Bearing Thickness

Vertical Oil Clearance

Material Code

Qty. Set

Bearing Shell No.

(Contâ&#x20AC;&#x2122;d.)

Main - full groove. 69.804/2.7482 1,2,4,5 Std. 10 20 30 40 69.822/2.7489

5M1041P

74.701/2.9410 74.727/2.9420

2.433/0.0958 .013/.0005 .084/.0033

23.57/0.928

F780

1482 U

74.701/2.9410 74.727/2.9420

2.433/0.0958 .013/.0005 .084/.0033

23.57/0.928

F780

1484 L

69.804/2.7482 74.701/2.9410 2.433/0.0958 .013/.0005 69.822/2.7489 74.727/2.9420 .084/.0033 Overflange length remains constant for standard and undersizes.

32.26/1.270

F780

1483 U/L

1,2,4,5

69.804/2.7482 69.822/2.7489

3 (Fl)

5M1485P 10 20 30 40

Main - full groove. Alt set to 5M1041P, with 0.010" overwidth flange increase for undersizes.* See below for dimensional information. 1,2,4,5 69.804/2.7482 74.701/2.9410 2.433/0.0958 .013/.0005 23.57/0.928 F780 4 1482 69.822/2.7489 74.727/2.9420 .084/.0033 U 1,2,4,5 69.804/2.7482 74.701/2.9410 2.433/0.0958 .013/.0005 23.57/0.928 F780 4 1484 69.822/2.7489 74.727/2.9420 .084/.0033 L 3 (Fl)

69.804/2.7482 74.701/2.9410 69.822/2.7489 74.727/2.9420 Stock not available from fee warehouses.

.010" u/s shaft .020" u/s shaft .030" u/s shaft .040" u/s shaft

5C671S

Cam 1

Std. 2 3 4 5

Max. Overall Length

2.433/0.0958 .013/.0005 .084/.0033

32.51/1.280

F780

1485 U/L

* DIMENSIONAL INFORMATION FOR 5M1485P Overall Width (Nominal) Increase in Width 1.280" +0.010" 1.280" +0.010" 1.280" +0.010" 1.280" +0.010"

53.835/2.1195 53.861/2.1205

57.036/2.2455 57.061/2.2465

1.580/0.0620

23.50/0.925

F23

N-9-1

53.073/2.0895 53.099/2.0905 52.311/2.0595 52.337/2.0605 51.549/2.0295 51.575/2.0305 50.787/1.9995 50.813/2.0005

56.274/2.2155 56.299/2.2165 55.512/2.1855 55.537/2.1865 54.750/2.1555 54.775/2.1565 53.988/2.1255 54.013/2.1265

1.580/0.0620

16.00/0.630

F23

N-8-2

1.580/0.0620

16.00/0.630

F23

N-8-3

1.580/0.0620

16.00/0.630

F23

N-8-4

1.580/0.0620

16.00/0.630

F23

N-8-5

ENGINE

VIN CYL

Bore x Stroke

390 (6.4) 401 (6.6)

X Z

4.165 x 3.574 4.165 x 3.680

V8 V8

TORQUE SETTINGS Connecting Rod 35-40 ft.lbs/47-54Nm Main Bearing 95-100 ft.lbs/129-136 Nm

Rod

8B819P

57.094/2.2478 57.112/2.2485

60.312/2.3745 60.325/2.3750

1.582/0.0623 .048/.0019 .104/.0041

20.45/0.805

F780

CB819P IH

Main - full groove. 69.804/2.7482 1,2,4,5 Std. 10 20 30 40 69.822/2.7489

74.701/2.9410 74.727/2.9420

2.433/0.0958 .013/.0005 .084/.0033

23.57/0.928

F780

1482 U

23.57/0.928

F780

32.26/1.270

F780

1484 L 1483 U/L

Std. 10 20

5M1041P

1,2,4,5

69.804/2.7482 74.701/2.9410 2.433/0.0958 69.822/2.7489 74.727/2.9420 3 (Fl) 69.804/2.7482 74.701/2.9410 2.433/0.0958 69.822/2.7489 74.727/2.9420 Overflange length remains constant for standard and undersizes.

.013/.0005 .084/.0033 .013/.0005 .084/.0033

AMERICAN MOTORS Type and Location

Standard Shaft Size

Housing Bore

Max. Bearing Thickness

Vertical Oil Clearance

Max. Overall Length

Material Code

Qty. Set

Bearing Shell No.

Engine Set No. Sizes Available

(Contâ&#x20AC;&#x2122;d.) Main - full groove. Alt set to 5M1041P, with 0.010" overwidth flange increase for undersizes.* See below for dimensional information. 69.804/2.7482 74.701/2.9410 2.433/0.0958 .013/.0005 23.57/0.928 F780 4 1482 1,2,4,5 69.822/2.7489 74.727/2.9420 .084/.0033 U 1,2,4,5

69.804/2.7482 69.822/2.7489

74.701/2.9410 74.727/2.9420

2.433/0.0958 .013/.0005 .084/.0033

23.57/0.928

F780

1484 L

69.804/2.7482 74.701/2.9410 69.822/2.7489 74.727/2.9420 Stock not available from fee warehouses.

2.433/0.0958 .013/.0005 .084/.0033

32.51/1.280

F780

1485 U/L

3 (Fl)

.010" u/s shaft .020" u/s shaft .030" u/s shaft .040" u/s shaft Cam 1 2 3 4 5

5M1485P 10 20 30 40

* DIMENSIONAL INFORMATION FOR 5M1485P Overall Width (Nominal) Increase in Width 1.280" +0.010" 1.280" +0.010" 1.280" +0.010" 1.280" +0.010"

53.835/2.1195 53.861/2.1205

57.036/2.2455 57.061/2.2465

1.580/0.0620

23.50/0.925

F23

N-9-1

53.073/2.0895 53.099/2.0905 52.311/2.0595 52.337/2.0605 51.549/2.0295 51.575/2.0305 50.787/1.9995 50.813/2.0005

56.274/2.2155 56.299/2.2165 55.512/2.1855 55.537/2.1865 54.750/2.1555 54.775/2.1565 53.988/2.1255 54.013/2.1265

1.580/0.0620

16.00/0.630

F23

N-8-2

1.580/0.0620

16.00/0.630

F23

N-8-3

1.580/0.0620

16.00/0.630

F23

N-8-4

1.580/0.0620

16.00/0.630

F23

N-8-5

5C671S Std.

AUDI AUDI ENGINE INDEX Engine Disp. 1471cc (1.5)......... 1471cc (1.5)......... 1471cc (1.5)......... 1471cc (1.5)......... 1471cc (1.5)......... 1471cc (1.5)......... 97 1588cc (1.6)..... 97 1588cc (1.6)..... 97 1588cc (1.6)..... 97 1588cc (1.6)..... 97 1588cc (1.6)..... 97 1588cc (1.6)..... 1715cc (1.7)......... 1780cc (1.8)......... 1780cc (1.8)......... 1780cc (1.8)......... 1781cc (1.8)......... 1781cc (1.8)......... 1781cc (1.8)......... 1781cc (1.8)......... 1781cc (1.8)......... 1781cc (1.8)......... 1781cc (1.8)......... 1781cc (1.8)......... 1781cc (1.8)......... 1983cc (2.0)......... 1983cc (2.0)......... 1986cc (2.0).........

Notation

VIN

Gas (XV) Gas (XW) Gas (XY) Gas (XZ) Gas (ZD) Gas (ZE) (CR),Diesel (CY), Turbo,Diesel (JK),Diesel Gas (YG) Gas (YH) Gas (YK) Gas (WT) Gas, SOHC (JN) Gas, SOHC (MG) Gas, SOHC (MG) (AEB), Turbo (AMB), Turbo (AMB), Turbo (AMU), Turbo (ATC), Turbo (ATW), Turbo (AWM), Turbo (AWM), Turbo (AWP), Turbo Gas, SOHC (3A) Gas, SOHC (3A) (CN),Diesel

G H G

A A B C B C T C C C C A B

Cyl. L4 L4 L4 L4 L4 L4 L4 L4 L4 L4 L4 L4 L4 L4 L4 L4 L4 L4 L4 L4 L4 L4 L4 L4 L4 L4 L4 L5

Year Line Engine Disp. 74-74 74-74 74-74 74-74 73-73 73-73 82-84 82-83 83-83 75-80 75-80 76-76 81-83 84-84 85-87 87-87 97-99 03-04 02-04 01-02 00-00 00-00 01-01 01-01 01-04 90-90 88-90 79-80

1 1 1 1 1 1 2 2 2 1 1 1 1 3 3 3 4 4 4 4 4 4 4 4 4 3 3 5

1986cc (2.0)......... 1986cc (2.0)......... 2144cc (2.2)......... 2144cc (2.2)......... 2144cc (2.2)......... 2144cc (2.2)......... 2144cc (2.2)......... 2144cc (2.2)......... 2144cc (2.2)......... 2226cc (2.2)......... 2226cc (2.2)......... 2226cc (2.2)......... 2226cc (2.2)......... 2226cc (2.2)......... 2226cc (2.2)......... 2226cc (2.2)......... 2226cc (2.2)......... 2226cc (2.2)......... 2226cc (2.2)......... 2226cc (2.2)......... 2226cc (2.2)......... 2226cc (2.2)......... 2309cc (2.3)......... 2309cc (2.3)......... 2309cc (2.3)......... 2309cc (2.3)......... 2309cc (2.3)......... 2309cc (2.3).........

Notation

VIN

Cyl.

(CN),Diesel (DE), Turbo,Diesel (WD) (WD) (WE) (WE) (WK), Turbo (WK), Turbo (WX), Turbo (3B), Turbo (AAN), Turbo (AAN), Turbo (AAN), Turbo (JT) (KX) (KX) (KX) (KX) (KZ) (MC), Turbo (MC), Turbo (MC), Turbo DOHC (7A) (NF) (NF) (NG) (NG) (NG)

G H

L5 L5 L5 L5 L5 L5 L5 L5 L5 L5 L5 L5 L5 L5 L5 L5 L5 L5 L5 L5 L5 L5 L5 L5 L5 L5 L5 L5

B B C C E A P R B A C D E B C D E E B C B C D

Year Line 81-81 82-85 78-80 81-83 78-80 81-84 80-80 81-83 83-85 91-91 95-97 92-93 92-94 84-87 84-84 85-86 84-87 87-87 85-88 89-89 86-91 86-88 90-91 87-89 87-91 89-89 87-92 90-92

5 5 7 7 6 6 6 6 7 8 8 8 8 8 8 8 8 8 8 9 9 9 8 8 8 8 8 8

AUDI MODEL INDEX Model 100 100 - E 100 QUATTRO 200 200 QUATTRO 200 QUATTRO - 10V 200 QUATTRO - 20V 4000

4000CS QUATTRO 4000S 4000S QUATTRO 5000 5000 - CS 5000 - S

5000 - TURBO 5000CS QUATTRO

CID

97 97

cc 2309 2309 2309 2226 2226 2226 2226 1588 1588 1715 2144 2226 1780 2144 2226 2226 1986 2144 2226 1986 2144 2226 2309 2144 2226

Liter

Description

2.3 2.3 2.3 2.2 2.2 2.2 2.2 1.6 1.6 Gas 1.7 Gas 2.2 2.2 1.8 Gas, SOHC 2.2 2.2 2.2 2.0 2.2 2.2 2.0 2.2 2.2 2.3 2.2 2.2

Years 89-91 89 89-91 89-91 89-90 91 91 82-83 80 81-83 80-83 86-87 84-87 84 85-86 84-85 79-85 78-83 86-88 79-81 79-83 85-88 87-88 81-83 86-88

Model

CID

5000S QUATTRO 80 80 QUATTRO 90 90 QUATTRO 90 QUATTRO - 20V A4 A4 - CABRIOLET A4 QUATTRO A4 QUATTRO - AVANT A4 QUATTRO CABRIOLET COUPE COUPE - GT COUPE QUATTRO 20V FOX 97 QUATTRO S4 S6 TT TT QUATTRO

Liter

Description

Years

2309 1983 2309 2309 1983 2309 2309 2309 1781 1781 1781 1781

2.3 2.0 Gas, SOHC 2.3 2.3 2.0 Gas, SOHC 2.3 2.3 2.3 DOHC 1.8 1.8 1.8 1.8

87-88 88-90 91-92 88-92 88 88-91 88-89 90-91 97-04 03-04 97-04 99-04

1781 2144 2144 2226 2309

1.8 2.2 2.2 2.2 2.3

04 81-82 83-84 84-87 87

2309 1471 1588 2144 2226 2226 1781 1781

2.3 DOHC 1.5 Gas 1.6 Gas 2.2 2.2 2.2 1.8 1.8

90-91 73-74 75-79 83-85 92-94 95-97 00-04 00-02

AUDI Type and Location

Standard Shaft Size

Max. Bearing Thickness

Housing Bore

ENGINE

VIN CYL

1471cc (1.5) Gas (XV) 1471cc (1.5) Gas (XW) 1471cc (1.5) Gas (XY) 1471cc (1.5) Gas (XZ) 1471cc (1.5) Gas (ZD) 1471cc (1.5) Gas (ZE) 97 1588cc (1.6) Gas (YG) 97 1588cc (1.6) Gas (YH) 97 1588cc (1.6) Gas (YK) 1715cc (1.7) Gas (WT)

L4 L4 L4 L4 L4 L4 L4 L4 L4 L4

Vertical Oil Clearance

Max. Overall Length

Bore x Stroke

Material Code

Qty. Set

Bearing Shell No.

Engine Set No. Sizes Available

TORQUE SETTINGS

76.5mm x 80mm 76.5mm x 80mm 76.5mm x 80mm 76.5mm x 80mm 76.5mm x 80mm 76.5mm x 80mm 79.5mm x 80mm 79.5mm x 80mm 79.5mm x 80mm 79.5mm x 86mm

Connecting Rod 33 ft. lbs./45 Nm Main Bearing 47 ft. lbs/64 Nm

Rod 45.949/1.8090 45.969/1.8098

49.000/1.9291 49.017/1.9298

1.506/0.0593 .018/.0007 .082/.0032

19.00/0.748

18.49/0.728

F780

18.49/0.728

F780

1636 IH 1644 L 1648 U

53.958/2.1243 53.978/2.1251

59.000/2.3228 59.019/2.3236

2.502/0.0985 .018/.0007 .083/.0033

18.49/0.728

F780

1648 L

3 (Fl)

53.958/2.1243 53.978/2.1251

59.000/2.3228 59.019/2.3236

2.502/0.0985 .018/.0007 .083/.0033

24.93/0.981

F780

1645 U/L

Small End - not bored, single pieces. 21.996/0.8660 25.000/0.9843 22.000/0.8661 25.033/0.9855

25.00/0.984

F100

RB4053

AR Auxiliary 42.959/1.6913 1 42.975/1.6919

46.000/1.8110 46.025/1.8120

15.00/0.591

F23

7006

41.959/1.6519 41.975/1.6526

45.000/1.7717 45.025/1.7726

15.00/0.591

F23

7007

AR Auxiliary 42.959/1.6913 1 42.974/1.6919

45.999/1.8110 46.025/1.8120

1.499/0.0590 .028/.0011 .084/.0033

14.99/0.590

F23

VWG-1-1

44.999/1.7716 45.024/1.7726

1.499/0.0590 .028/.0011 .084/.0033

14.99/0.590

F23

VWG-1-2

41.958/1.6519 41.974/1.6525

4B1636 Std. .25 .50 .75 1.0

5M1645 Std. .25 .50 .75 1.0

RB4053 Semi

2BS7006 Semi

Std.

ENGINE

VIN CYL

Bore x Stroke

97 1588cc (1.6) (CR) Diesel 97 1588cc (1.6) (CY) Turbo Diesel 97 1588cc (1.6) (JK) Diesel

G H G

76.5mm x 86.4mm 76.5mm x 86.4mm 76.5mm x 86.4mm

L4 L4 L4

2C1209S

TORQUE SETTINGS

Connecting Rod 22 ft.lbs/30 Nm + 90 deg (Turbo) Connecting Rod 33 ft. lbs/45 Nm (Non-Turbo) Main Bearing 48 ft. lbs/65 Nm (Turbo)

Rod 47.758/1.8802 47.778/1.8810

50.600/1.9921 50.619/1.9929

1.405/0.0553 .012/.0005 .077/.0030

Main - for engines with flanged thrust main bearings only. 1,2,5 53.958/2.1243 59.000/2.3228 2.502/0.0985 .018/.0007 53.978/2.1251 59.019/2.3236 .083/.0033 1,2,4,5 53.958/2.1243 59.000/2.3228 2.502/0.0985 .018/.0007 53.978/2.1251 59.019/2.3236 .083/.0033 4 53.958/2.1243 59.000/2.3228 2.502/0.0985 .018/.0007 53.978/2.1251 59.019/2.3236 .083/.0033 3 (Fl) 53.958/2.1243 59.000/2.3228 2.502/0.0985 .018/.0007 53.978/2.1251 59.019/2.3236 .083/.0033

19.00/0.748

18.49/0.728

F810

F780

1606A IH 1644 L 1648 U 1648 L 1645 U/L

18.49/0.728

F780

18.49/0.728

F780

24.93/0.981

F780

Small End - not bored, single pieces. 23.996/0.9447 27.000/1.0630 24.000/0.9449 27.025/1.0640

29.30/1.154

F100

AR Auxiliary 42.959/1.6913 1 42.975/1.6919

46.000/1.8110 46.025/1.8120

15.00/0.591

F23

7006

45.000/1.7717 45.025/1.7726

15.00/0.591

F23

7007

41.959/1.6519 41.975/1.6526

RB4071

4B1606A Std. .25 .50 .75 1.0

5M1645 Std. .25 .50 .75 1.0

RB4071 Semi

2BS7006 Semi

AUDI Engine Set No. Sizes Available

Type and Location

Housing Bore

Max. Bearing Thickness

Vertical Oil Clearance

Max. Overall Length

Material Code

Qty. Set

Bearing Shell No.

(Contâ&#x20AC;&#x2122;d.) 2C1209S Std.

AR Auxiliary 42.959/1.6913 1 42.974/1.6919 2

Standard Shaft Size

41.958/1.6519 41.974/1.6525

45.999/1.8110 46.025/1.8120

1.499/0.0590 .028/.0011 .084/.0033

14.99/0.590

F23

VWG-1-1

44.999/1.7716 45.024/1.7726

1.499/0.0590 .028/.0011 .084/.0033

14.99/0.590

F23

VWG-1-2

ENGINE

VIN CYL

Bore x Stroke

1780cc (1.8) Gas, SOHC (JN) 1780cc (1.8) Gas, SOHC (MG) 1780cc (1.8) Gas, SOHC (MG) 1983cc (2.0) Gas, SOHC (3A) 1983cc (2.0) Gas, SOHC (3A)

A B C A B

81mm x 86mm 81mm x 86mm 81mm x 86mm 83mm x 93mm 83mm x 93mm

L4 L4 L4 L4 L4

TORQUE SETTINGS Connecting Rod 22ft.lbs + 90 deg/30Nm + 90 deg Main Bearing 50ft.lbs/68Nm

Rod

4B1606A

47.758/1.8802 47.778/1.8810

19.00/0.748

F810

1606A IH

18.49/0.728

F780

18.49/0.728

F780

18.49/0.728

F780

24.93/0.981

F780

1644 L 1648 U 1648 L 1645 U/L

46.000/1.8110 46.025/1.8120

15.00/0.591

F23

7006

41.959/1.6519 41.975/1.6526

45.000/1.7717 45.025/1.7726

15.00/0.591

F23

7007

AR Auxiliary 1 42.959/1.6913 42.974/1.6919 2 41.958/1.6519 41.974/1.6525

45.999/1.8110 46.025/1.8120 44.999/1.7716 45.024/1.7726

14.99/0.590

F23

VWG-1-1

14.99/0.590

F23

VWG-1-2

Std. .25 .50 .75 1.0

50.600/1.9921 50.619/1.9929

1.405/0.0553 .012/.0005 .077/.0030

Main - for engines with flanged thrust main bearings only. 1,2,5 53.958/2.1243 59.000/2.3228 2.502/0.0985 .018/.0007 Std. .25 .50 .75 1.0 53.978/2.1251 59.019/2.3236 .083/.0033 1,2,4,5 53.958/2.1243 59.000/2.3228 2.502/0.0985 .018/.0007 53.978/2.1251 59.019/2.3236 .083/.0033 4 53.958/2.1243 59.000/2.3228 2.502/0.0985 .018/.0007 53.978/2.1251 59.019/2.3236 .083/.0033 3 (Fl) 53.958/2.1243 59.000/2.3228 2.502/0.0985 .018/.0007 53.978/2.1251 59.019/2.3236 .083/.0033

5M1645

2BS7006 Semi

AR Auxiliary 42.959/1.6913 1 42.975/1.6919 2

2C1209S Std.

1.499/0.0590 .028/.0011 .084/.0033 1.499/0.0590 .028/.0011 .084/.0033

ENGINE

VIN CYL

Bore x Stroke

1781cc (1.8) (AEB) Turbo 1781cc (1.8) (AMB) Turbo 1781cc (1.8) (AMB) Turbo 1781cc (1.8) (AMU) Turbo 1781cc (1.8) (ATC) Turbo 1781cc (1.8) (ATW) Turbo 1781cc (1.8) (AWM) Turbo 1781cc (1.8) (AWM) Turbo 1781cc (1.8) (AWP) Turbo

81mm x 86.4mm 81mm x 86.4mm 81mm x 86.4mm 81mm x 86.4mm 81mm x 86.4mm 81mm x 86.4mm 81mm x 86.4mm 81mm x 86.4mm 81mm x 86.4mm

C T C C C C

L4 L4 L4 L4 L4 L4 L4 L4 L4

TORQUE SETTINGS

Rod

4B1606A

47.758/1.8802 47.778/1.8810

50.600/1.9921 50.619/1.9929

1.405/0.0553 .012/.0005 .077/.0030

19.00/0.748

F810

1606A IH

47.758/1.8802 47.778/1.8810

50.600/1.9921 50.619/1.9929

1.405/0.0553 .012/.0005 .077/.0030

19.00/0.748

F781

1606H IH

Rod - for engines using a rod bearing with no tang and 18.50 mm wide. 47.758/1.8802 50.600/1.9921 1.405/0.0553 .012/.0005 18.50/0.728 47.778/1.8810 50.619/1.9929 .067/.0026

F810

1615A IH

18.50/0.728

F780

18.50/0.728

F780

1644 L 1648 U

Std. .25 .50 .75 1.0 Rod

4B1606H Std. .025 .25 .50

4B1615A Std. .25 .50 .75

5M1644 Std. .25 .50 .75

Main - Trimetal material - half groove set. 53.958/2.1243 59.000/2.3228 2.502/0.0985 1,2,3,5 53.978/2.1251 59.019/2.3236 1-5 53.958/2.1243 59.000/2.3228 2.502/0.0985 53.978/2.1251 59.019/2.3236

.018/.0007 .083/.0033 .018/.0007 .083/.0033

AUDI Type and Location

Standard Shaft Size

Max. Bearing Thickness

Housing Bore

Vertical Oil Clearance

Max. Overall Length

Material Code

Qty. Set

Bearing Shell No.

Engine Set No. Sizes Available

(Contâ&#x20AC;&#x2122;d.) Main - High Strength Aluminum Silicon material - half groove set. 53.963/2.1245 59.000/2.3228 2.508/0.0987 .006/.0002 1-5 53.983/2.1253 59.010/2.3232 .061/.0024

18.50/0.728

1-5

18.50/0.728

F810

1669A L

1.98/0.078

F817

1644T U/L

53.963/2.1245 53.983/2.1253

59.000/2.3228 59.010/2.3232

2.508/0.0987 .006/.0002 .061/.0024

F810

1668A U

5M1668A Std. .25 .50 .75

Thrust 59.500/2.3425 73.200/2.8819 (ID) (OD) Note : Set contains four pieces. Required with 5M1644/5M1668A main sets.

ENGINE

VIN CYL

1986cc (2.0) (CN) Diesel 1986cc (2.0) (CN) Diesel 1986cc (2.0) (DE) Turbo Diesel

G H

L5 L5 L5

Bore x Stroke

2T1644 Std.

TORQUE SETTINGS

76.5mm x 86mm 76.5mm x 86mm 76.5mm x 86mm

Connecting Rod 33ft.lbs/44Nm Main Bearing 47ft.lbs/63Nm

Rod 47.758/1.8802 47.778/1.8810

50.600/1.9921 50.619/1.9929

1.405/0.0553 .012/.0005 .077/.0030

Main - For engines 1979-85 equipped with thrustwashers. 57.958/2.2818 63.000/2.4803 2.502/0.0985 .022/.0009 1-6 57.978/2.2826 63.019/2.4811 .087/.0034 Main - for 1979 engines with flanged thrust main bearings only. 1,2,4,5,6 57.958/2.2818 63.000/2.4803 2.502/0.0985 .022/.0009 57.978/2.2826 63.019/2.4811 .087/.0034 3 (Fl) 57.958/2.2818 63.000/2.4803 2.502/0.0985 .022/.0009 57.978/2.2826 63.019/2.4811 .087/.0034

19.00/0.748

18.50/0.728

F810

F780

24.93/0.982

F780

1.98/0.078

F817

5B1606A

1606A IH

Std. .25 .50 .75 1.0

1604 U/L

Std. .25 .50 .75

1604 U/L 1605 U/L

6M1604

6M1605 Std. .25 .50 .75

Thrust 59.500/2.3425 73.200/2.8819 (ID) (OD) Note : Set includes four pieces. Required with 5M1604 main set.

ENGINE 2144cc (2.2) (WE) 2144cc (2.2) (WE) 2144cc (2.2) (WK) Turbo 2144cc (2.2) (WK) Turbo

VIN CYL B C

L5 L5 L5 L5

Bore x Stroke

1644T U/L

2T1644 Std.

TORQUE SETTINGS

79.5mm x 86.4mm 79.5mm x 86.4mm 79.5mm x 86.4mm 79.5mm x 86.4mm

Connecting Rod 36 ft.lbs/50 Nm Main Bearing 47 ft.lbs/64 Nm

Rod

Main 1,2,4,5,6 3 (Fl)

45.949/1.8090 45.969/1.8098

49.000/1.9291 49.017/1.9298

1.506/0.0593 .019/.0007 .082/.0032

19.00/0.748

57.958/2.2818 57.978/2.2826

63.000/2.4803 63.019/2.4811

2.502/0.0985 .022/.0009 .087/.0034

18.50/0.728

57.958/2.2818 57.978/2.2826

63.000/2.4803 63.019/2.4811

2.502/0.0985 .022/.0009 .087/.0034

24.93/0.982

F780

1605 U/L

25.00/0.984

F100

RB4053

Small End - single pieces, not bored. 21.996/0.8660 25.000/0.9843 22.000/0.8661 25.033/0.9855

ENGINE 2144cc (2.2) (WD) 2144cc (2.2) (WD) 2144cc (2.2) (WX) Turbo

F780

5B1636

1636 IH

Std. .25 .50 .75 1.0

1604 U/L

Std. .25 .50 .75

6M1605

RB4053 Semi

VIN CYL B C

F780

L5 L5 L5

Bore x Stroke

TORQUE SETTINGS

79.5mm x 86.4mm 79.5mm x 86.4mm 79.5mm x 86.4mm

Connecting Rod 36 ft.lbs/50 Nm Main Bearing 47 ft.lbs/64 Nm

Rod 45.949/1.8090 45.969/1.8098

49.000/1.9291 49.017/1.9298

1.506/0.0593 .019/.0007 .082/.0032

19.00/0.748

Main - engines from 1979-85. 1-6 57.958/2.2818 63.000/2.4803 57.978/2.2826 63.019/2.4811

2.502/0.0985 .022/.0009 .087/.0034

18.50/0.728

F780

5B1636

1636 IH

Std. .25 .50 .75 1.0

1604 U/L

Std. .25 .50 .75

6M1604

AUDI Engine Set No. Sizes Available

Type and Location

Standard Shaft Size

Housing Bore

Max. Bearing Thickness

Vertical Oil Clearance

Max. Overall Length

Material Code

Qty. Set

Bearing Shell No.

2.502/0.0985 .022/.0009 .087/.0034

18.50/0.728

F780

1604 U/L

2.502/0.0985 .022/.0009 .087/.0034

24.93/0.982

F780

1605 U/L

1.98/0.078

F817

1644T U/L

25.00/0.984

F100

RB4053

(Contâ&#x20AC;&#x2122;d.) 6M1605

Std. .25 .50 .75

Main - 1978 engines only. 1,2,4,5, 57.958/2.2818 63.000/2.4803 57.978/2.2826 63.019/2.4811 6 3 (Fl)

57.958/2.2818 57.978/2.2826

63.000/2.4803 63.019/2.4811

Thrust

2T1644 Std.

RB4053 Semi

59.500/2.3425 73.200/2.8819 (ID) (OD) Note : Set includes four pieces. Required with 5M1604 main set. Small End - single pieces, not bored. 21.996/0.8660 25.000/0.9843 22.000/0.8661 25.033/0.9855

ENGINE

VIN CYL

Bore x Stroke

2226cc (2.2) (3B) Turbo 2226cc (2.2) (AAN) Turbo 2226cc (2.2) (AAN) Turbo 2226cc (2.2) (AAN) Turbo 2226cc (2.2) (JT) 2226cc (2.2) (KX) 2226cc (2.2) (KX) 2226cc (2.2) (KX) 2226cc (2.2) (KX) 2226cc (2.2) (KZ) 2309cc (2.3) DOHC (7A) 2309cc (2.3) (NF) 2309cc (2.3) (NF) 2309cc (2.3) (NG) 2309cc (2.3) (NG) 2309cc (2.3) (NG)

E A P R B A C D E B E B C B C D

81mm x 86.4mm 81mm x 86.4mm 81mm x 86.4mm 81mm x 86.4mm 81mm x 86.4mm 81mm x 86.4mm 81mm x 86.4mm 81mm x 86.4mm 81mm x 86.4mm 81mm x 86.4mm 81mm x 86.4mm 81mm x 86.4mm 81mm x 86.4mm 81mm x 86.4mm 81mm x 86.4mm 81mm x 86.4mm

L5 L5 L5 L5 L5 L5 L5 L5 L5 L5 L5 L5 L5 L5 L5 L5

TORQUE SETTINGS Connecting Rod 22 ft.lbs/30 Nm + 90 deg. Main Bearing 47 ft.lbs/64 Nm

Rod

5B1606A Std. .25 .50 .75 1.0

6M1604

Main 1-6

Std. .25 .50 .75

47.758/1.8802 47.778/1.8810

50.600/1.9921 50.619/1.9929

1.405/0.0553 .012/.0005 .077/.0030

19.00/0.748

F810

1606A IH

57.958/2.2818 57.978/2.2826

63.000/2.4803 63.019/2.4811

2.502/0.0985 .022/.0009 .087/.0034

18.50/0.728

F780

1604 U/L

1.98/0.078

F817

1644T U/L

Thrust

2T1644 Std.

59.500/2.3425 73.200/2.8819 (ID) (OD) Note : Set includes four pieces. Required with 5M1604 main set.

ENGINE

VIN CYL

Bore x Stroke

2226cc (2.2) (MC) Turbo 2226cc (2.2) (MC) Turbo 2226cc (2.2) (MC) Turbo

C D E

81mm x 86.4mm 81mm x 86.4mm 81mm x 86.4mm

L5 L5 L5

TORQUE SETTINGS Connecting Rod 22 ft.lbs/30 Nm + 90 deg. Main Bearing 47 ft.lbs/64 Nm

Rod

5B1636 Std. .25 .50 .75 1.0

6M1604

Main 1-6

Std. .25 .50 .75

45.949/1.8090 45.969/1.8098

49.000/1.9291 49.017/1.9298

1.506/0.0593 .019/.0007 .082/.0032

19.00/0.748

F780

1636 IH

57.958/2.2818 57.978/2.2826

63.000/2.4803 63.019/2.4811

2.502/0.0985 .022/.0009 .087/.0034

18.50/0.728

F780

1604 U/L

1.98/0.078

F817

1644T U/L

Thrust

2T1644 Std.

59.500/2.3425 73.200/2.8819 (ID) (OD) Note : Set includes four pieces. Required with 5M1604 main set.

AUSTIN AUSTIN ENGINE INDEX Engine Disp.

Notation

VIN

Cyl.

52 848cc (0.9)....... 948cc ................... 970cc ................... 61 997cc (1.0)....... 998cc ...................

L4 L4 L4 L4 L4

Year Line Engine Disp. 59-78 58-64 63-65 62-64 61-78

1 1 2 3 3

Notation

VIN

65 1071cc (1.1)..... 1098cc ................. 67 1100cc (1.1)..... 78 1275cc (1.3)..... 1798cc (1.8).........

Cyl. L4 L4 L4 L4 L4

Year Line 63-65 61-78 61-78 63-78 66-78

2 3 2 2 4

AUSTIN MODEL INDEX Model AMERICA HEALEY SPRITE HEALEY SPRITE - MK IV MARINA Type and Location

CID

Liter

78 67 78

1275 1100 1275

1.3 1.1 1.3

68-72 63-66 67

1275 1798

1.3 1.8

68-70 73-75

Standard Shaft Size

ENGINE

Description

Max. Bearing Thickness

Housing Bore

VIN CYL

52 848cc (0.9) 948cc

L4 L4

Years

Model

CID

Liter

52 61 65 78

1798 848 997 1071 1275

1.8 0.9 1.0 1.1 1.3

MARINA - GT MINI MINI COOPER

Vertical Oil Clearance

Max. Overall Length

Bore x Stroke

Material Code

Qty. Set

Description

Years 73-75 60-66 62-64 64 64-69

Bearing Shell No.

Engine Set No. Sizes Available

TORQUE SETTINGS

63mm x 68mm 63mm x 76mm

Connecting Rod 35 ft.lbs/47 Nm Main Bearing 60-65 ft.lbs/81-88 Nm

Rod

Main 1,2,3

41.285/1.6254 41.298/1.6259

44.971/1.7705 44.983/1.7710

1.826/0.0719 .020/.0008 .071/.0028

22.35/0.880

44.463/1.7505 44.475/1.7510

48.158/1.8960 48.171/1.8965

1.834/0.0722 .015/.0006 .066/.0026

30.22/1.190

Thrust - heavy duty material. 49.911/1.9650 61.849/2.4350 2 50.165/1.9750 62.103/2.4450 Note: Set includes four pieces, use on No. 2 position. Required with 3M2202 main set. Cam 1

42.278/1.6645 42.291/1.6650

ENGINE

45.606/1.7955 45.631/1.7965

1.638/0.0645 .039/.0015 .127/.0050

VIN CYL

970cc 65 1071cc (1.1) 67 1100cc (1.1) 78 1275cc (1.3)

2.36/0.093

L4 L4 L4 L4

28.83/1.135

Bore x Stroke 71mm x 62mm 71mm x 68mm 64.5mm x 84mm 70.5mm x 81mm

21.59/0.850

1.829/0.0720 .025/.0010 .076/.0030

Thrust 2

56.260/2.2150 76.070/2.9949 56.510/2.2248 76.330/3.0051 Note: Set includes four pieces, use on No. 2 position. Required with 3M2204 main set.

F23

Std. 10 20 30 40

2202 IH

Std. 10 20 30 40

25.52/1.005

2.36/0.093

2202T U/L

2T2202

4096

1C4096

Std.

F780

F250

4B2201

2201 IH

Std. 10 20 30 40

2206 IH

Std. 10 20 30 40

2204 IH

Std. 10 20 30 40

4B2206

3M2204

2204T U/L

2T2204

3C4095

Cam - for all engines except 1098cc and 1275cc - 1964 on. 42.278/1.6645 45.606/1.7955 1.638/0.0645 .039/.0015 1 42.291/1.6650 45.631/1.7965 .127/.0050

28.83/1.135

F23

4096

41.217/1.6227 41.229/1.6232

44.526/1.7530 44.552/1.7540

1.628/0.0641 .041/.0016 .129/.0051

19.30/0.760

F23

4094

34.867/1.3727 34.879/1.3732

38.176/1.5030 38.202/1.5040

1.628/0.0641 .041/.0016 .129/.0051

13.74/0.541

F23

4095

3M2202

Connecting Rod 35 ft.lbs/47 Nm Main Bearing 60 ft.lbs/81 Nm

Rod - for engines with 1.7504/1.7509" standard journal. 44.460/1.7504 48.146/1.8955 1.824/0.0718 .025/.0010 44.473/1.7509 48.158/1.8960 .076/.0030 54.508/2.1460 54.521/2.1465

F250

4B2201

2201 IH

TORQUE SETTINGS

22.35/0.880

50.183/2.0005 50.825/2.0010

F780

Std.

Rod - for engines with 1.6254/1.6259" standard journal. 41.285/1.6254 44.971/1.7705 1.826/0.0719 .020/.0008 41.298/1.6259 44.983/1.7710 .071/.0028

Main 1,2,3

F780

Std.

AUSTIN Engine Set No. Sizes Available

Max. Overall Length

Material Code

Qty. Set

Bearing Shell No.

Cam - for 1098cc and 1275cc engines 1964 on. 42.278/1.6645 45.606/1.7955 1.638/0.0645 .039/.0015 1 42.291/1.6650 45.631/1.7965 .127/.0050

28.83/1.135

F23

4096

41.217/1.6227 41.229/1.6232

44.526/1.7530 44.552/1.7540

1.628/0.0641 .041/.0016 .129/.0051

19.30/0.760

F23

4094

34.867/1.3727 34.887/1.3735

38.189/1.5035 38.209/1.5043

1.641/0.0646 .020/.0008 .112/.0044

19.30/0.760

F23

4099

Standard Shaft Size

Housing Bore

Max. Bearing Thickness

Vertical Oil Clearance

(Contâ&#x20AC;&#x2122;d.) 3C4099 Std.

Type and Location

ENGINE

VIN CYL

61 997cc (1.0) 998cc 1098cc

L4 L4 L4

Bore x Stroke 62mm x 81mm 65mm x 76mm 64.5mm x 84mm

TORQUE SETTINGS Connecting Rod 35 ft.lbs/47 Nm Main Bearing 70-75 ft.lbs/95-101 Nm

Rod

4B2201 Std. 10 20 30 40

3M2203

Main 1,2,3

Std. 10 20 30 40 50

2T2203 Std.

3C4095

Cam 1

22.35/0.880

F780

2201 IH

44.463/1.7505 44.475/1.7510

48.158/1.8960 48.171/1.8965

1.829/0.0720 .025/.0010 .076/.0030

27.10/1.067

F780

2203 IH

2.36/0.093

F250

2203T U/L

28.83/1.135

F23

4096

19.30/0.760

F23

4094

13.74/0.541

F23

4095

22.22/0.875

F100

RB843

42.278/1.6645 42.291/1.6650 41.217/1.6227 41.229/1.6232 34.867/1.3727 34.879/1.3732

45.606/1.7955 45.631/1.7965 44.526/1.7530 44.552/1.7540 38.176/1.5030 38.202/1.5040

Small End - not bored. 15.862/0.6245 15.875/0.6250

19.037/0.7495 19.062/0.7505

1.826/0.0719 .020/.0008 .071/.0028

49.910/1.9650 71.760/2.8252 50.160/1.9748 72.010/2.8350 Note: Set includes four pieces, use on No. 2 position. Required with 3M2203 main set.

Semi

44.971/1.7705 44.983/1.7710

Thrust 2

Std.

RB843

41.285/1.6254 41.298/1.6259

ENGINE

VIN CYL

1798cc (1.8)

1.638/0.0645 .039/.0015 .127/.0050 1.628/0.0641 .041/.0016 .129/.0051 1.628/0.0641 .041/.0016 .129/.0051

Bore x Stroke 80.2mm x 88.9mm

TORQUE SETTINGS Connecting Rod 40-45 ft.lbs/54-61 Nm Main Bearing 70 ft.lbs/95 Nm

Rod

4B2250 Std. 10 20 30 40

5M2255

Main 1,3,5

Std. 10 20 30 2,4

2T2252 Std.

3C4306

1.816/0.0715 .041/.0016 .092/.0036

20.06/0.790

F780

2250 IH

54.013/2.1265 54.026/2.1270

57.683/2.2710 57.696/2.2715

1.816/0.0715 .025/.0010 .067/.0026

28.70/1.130

F820

2254AL IH

54.013/2.1265 54.026/2.1270

57.683/2.2710 57.696/2.2715

1.816/0.0715 .025/.0010 .067/.0026

19.55/0.770

F820

2255AL IH

2.36/0.093

2252T U/L

37.57/1.479

F23

4306

28.83/1.135

F23

4307

20.89/0.822

F23

4308

27.23/1.072

F100

RB4012

59.436/2.3400 74.498/2.9330 59.690/2.3500 74.752/2.9430 Note: Set includes four pieces, use on No. 2 position. Required with 5M2255 main set.

Cam 1 2 3

Semi

51.333/2.0210 51.346/2.0215

Thrust 2

Std.

RB4012

47.648/1.8759 47.660/1.8764

45.433/1.7887 45.446/1.7892 43.909/1.7287 43.922/1.7292 41.217/1.6227 41.229/1.6232

48.641/1.9150 48.666/1.9160 47.117/1.8550 47.142/1.8560 44.425/1.7490 44.450/1.7500

1.585/0.0624 .025/.0010 .076/.0030 1.585/0.0624 .025/.0010 .076/.0030 1.585/0.0624 .025/.0010 .076/.0030

Small End - not bored, single pieces. 20.640/0.8126 23.805/0.9372 (Nominal) 23.825/0.9380

BMW BMW ENGINE INDEX Engine Disp. 1796cc (1.8)......... 1895cc (1.9)......... 152 2494cc (2.5)... 152 2494cc (2.5)... 152 2494cc (2.5)... 152 2494cc (2.5)... 152 2494cc (2.5)... 2693cc (2.7)......... 2788cc (2.8).........

Notation

VIN

Cyl.

M42B18 (M42) M44B19 (M44)

L4 L4 L6 L6 L6 L6 L6 L6 L6

M20B25 (M20) M50B25 (M50) M52B25 (M52) M54B25 (M54) M20B27 (M20) Carb.

Year Line Engine Disp. 91-95 96-99 68-71 87-93 91-95 98-00 01-06 82-88 68-74

1 1 3 2 2 2 2 2 3

Notation

2788cc (2.8)......... 2793cc (2.8)......... 2979cc (3.0)......... 2985cc (3.0)......... 2985cc (3.0)......... 3210cc (3.2)......... 3430cc (3.5)......... 3453cc (3.5).........

VIN

F.I. (M30) M52B28 (M52) M54B30 (M54)

Cyl. L6 L6 L6 L6 L6 L6 L6 L6

(M30) (M30) SOHC (M30) DOHC (S38)

Year Line 79-81 96-00 01-05 71-76 75-78 78-84 85-93 87-88

3 2 4 3 3 3 3 3

BMW MODEL INDEX Model 2.8 BAVARIA 2500 2800 2800CS 3.0CS 3.0CSI 3.0CSL 3.0S 3.0SI 318I

CID 152

318IC 318IS 318TI 323CI 323I 323I - SPORT WAGON 323IC 323IS 325 325CI 325E 325I 325I - SPORT WAGON 325IC 325IS 325IX 325XI 325XI - SPORT WAGON 328CI 328I 328IC 328IS 330CI 330I Type and Location

152 152 152 152 152 152 152 152 152 152 152 152 152 152 152 152 152

Liter

2788 2494 2788 2788 2985 2985 2985 2985 2985 1796 1895 1796 1895 1796 1895 1796 1895 2494 2494 2494 2494 2494 2693 2494 2693 2494 2494 2494 2494 2494 2494 2494 2494 2494 2494

2.8 2.5 2.8 2.8 3.0 3.0 3.0 3.0 3.0 1.8 1.9 1.8 1.9 1.8 1.9 1.8 1.9 2.5 2.5 2.5 2.5 2.5 2.7 2.5 2.7 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5

Carb.

M42B18 M44B19 M42B18 M44B19 M42B18 M44B19 M42B18 M44B19 M52B25 M52B25 M52B25 M52B25 M52B25 M20B27 M54B25 M20B27 M20B25 M50B25 M54B25 M54B25 M20B25 M50B25 M20B25 M50B25 M20B25 M54B25

71 68-71 68-74 68-71 71-74 71-74 71 71-74 71-76 91-95 96-98 91-95 96-97 91-95 96-97 95 96-99 00 99-00 00 98-99 98-99 87-88 01-06 84-87 87-91 92-95 01-05 01-03 87-93 94-95 87-91 92-95 88-91 01-05

2494 2793 2793 2793 2793 2979 2979

2.5 2.8 2.8 2.8 2.8 3.0 3.0

M54B25 M52B28 M52B28 M52B28 M52B28 M54B30 M54B30

01-03 00 96-00 96-99 96-99 01-05 01-05

Standard Shaft Size

Carb. Carb.

Max. Bearing Thickness

Housing Bore

ENGINE

Description

VIN CYL

1796cc (1.8) M42B18 (M42) 1895cc (1.9) M44B19 (M44)

L4 L4

Years

Model

CID

330XI 525I 525I - SPORT WAGON 525IT 528E 528I

152 152 152 152 152

528IT 530I 533I 535I 535IS 630CSI 633CSI 635CSI 733I 735I 735IL BAVARIA L6 L7 M5 M6 X3

152

X3 - 2.5I X3 - 3.0I X5 X5 - 3.0I Z3 - COUPE

152

Z3 - ROADSTER 152 152 Z4 - ROADSTER

Vertical Oil Clearance

Max. Overall Length

Bore x Stroke

152

Material Code

Liter

2979 2494 2494 2494 2494 2494 2693 2788 2793 2793 2979 2985 3210 3430 3430 2985 3210 3430 3210 3430 3430 2985 3430 3430 3453 3453 2494 2979 2494 2979 2979 2979 2793 2979 1895 2494 2494 2793 2979 2494 2979

3.0 2.5 2.5 2.5 2.5 2.5 2.7 2.8 2.8 2.8 3.0 3.0 3.2 3.5 3.5 3.0 3.2 3.5 3.2 3.5 3.5 3.0 3.5 3.5 3.5 3.5 2.5 3.0 2.5 3.0 3.0 3.0 2.8 3.0 1.9 2.5 2.5 2.8 3.0 2.5 3.0

Qty. Set

Description M54B30 M20B25 M50B25 M54B25 M54B25 M50B25 M20B27 F.I. M52B28 M52B28 M54B30 SOHC SOHC SOHC SOHC SOHC SOHC SOHC DOHC DOHC M54B25 M54B30 M54B25 M54B30 M54B30 M54B30 M52B28 M54B30 M44B19 M52B25 M54B25 M52B28 M54B30 M54B25 M54B30

Bearing Shell No.

Years 01-05 89-90 91-95 01-05 01-03 93-95 82-88 79-81 97-00 99-00 01-05 75-78 83-84 85-93 88 77 78-84 85-89 78-84 85-92 88-92 72-74 87 86-87 88 87-88 04 04 05 05 01-04 05 99-00 01-02 96-98 99-00 01-02 97-00 01-02 03-06 03-05

Engine Set No. Sizes Available

TORQUE SETTINGS

84mm x 81mm 85mm x 83.5mm

Connecting Rod + 70 degrees Stage 2 (1.8L engines) Connecting Rod +20 deg + 70 deg Stage 2 & 3 (1.9L engines)

Connecting Rod 17 ft.lbs/23 Nm Stage 1 (1.8L engines) Connecting Rod 48 INCH.lbs/5 Nm Stage 1 (1.9L engines) Main Bearings 14-18 ft.lbs/19-24 Nm + 50 deg Rod 44.975/1.7707 44.991/1.7713

48.000/1.8898 48.016/1.8904

1.493/0.0588 .023/.0009 .081/.0032

18.00/0.709

F780

1490 IH

4B1490 Std. .25 .50 .75 1.0

BMW Engine Set No. Sizes Available

Type and Location

Standard Shaft Size

Housing Bore

59.971/2.3611 59.990/2.3618

65.000/2.5591 65.019/2.5598

59.971/2.3611 59.990/2.3618

65.000/2.5591 65.019/2.5598

Max. Bearing Thickness

Vertical Oil Clearance

Max. Overall Length

Material Code

Qty. Set

Bearing Shell No.

2.490/0.0980 .030/.0012 .088/.0035

20.00/0.787

F780

1538 U/L

2.490/0.0980 .030/.0012 .088/.0035

24.94/0.982

F780

1539 U

(Contâ&#x20AC;&#x2122;d.) 5M1538

Main 1-5

Std. .25 .50 4 (Fl)

* DIMENSIONAL INFORMATION FOR 5M1538 Overall Width (Nominal) Increase in Width 0.25 mm u/size 30.14 mm +0.20 mm 0.50 mm u/size 30.34 mm +0.40 mm

ENGINE

VIN CYL

152 2494cc (2.5) M20B25 (M20) 152 2494cc (2.5) M50B25 (M50) 152 2494cc (2.5) M52B25 (M52) 152 2494cc (2.5) M54B25 (M54) 2693cc (2.7) M20B27 (M20) 2793cc (2.8) M52B28 (M52)

L6 L6 L6 L6 L6 L6

Bore x Stroke 84mm x 75mm 84mm x 75mm 84mm x 75mm 84mm x 75mm 84mm x 81mm 84mm x 84mm

TORQUE SETTINGS Connecting Rod 17 ft.lbs/23 Nm + 70 deg Main Bearing (Aluminum Block) + 70 deg. Step 2 : 1991-98 engines

Main Bearing (Cast Iron Blocks) + 50 deg. Step 2 : 1991-98 engines

Main Bearing 15-18 ft.lbs/20-24 Nm Step 1 : 1991-98 engines

Main Bearing 44-49 ft.lbs/60-66 Nm 1987-90 engines Rod

6B1490 Std. .25 .50 .75 1.0

7M1532 Std. .25 .50

44.975/1.7707 44.991/1.7713

48.000/1.8898 48.016/1.8904

1.493/0.0588 .023/.0009 .081/.0032

Main - half groove mains with double tang on lower halves. 1,2,3,4, 59.971/2.3611 65.000/2.5591 2.490/0.0980 .030/.0012 59.990/2.3618 65.019/2.5598 .088/.0035 5,7 6 (Fl) 59.971/2.3611 65.000/2.5591 2.490/0.0980 .030/.0012 59.990/2.3618 65.019/2.5598 .088/.0035

18.00/0.709

F780

1490 IH

20.00/0.787

F780

1538 U/L

24.94/0.982

F780

1539 U/L

* DIMENSIONAL INFORMATION FOR 7M1532 Overall Width (Nominal) Increase in Width 0.25 mm u/size 30.14 mm +0.20 mm 0.50 mm u/size 30.34 mm +0.40 mm

7M1539 Std. .25 .50

Main - full groove set with single tang on lower halves. 1,2,3,4, 59.971/2.3611 65.000/2.5591 2.490/0.0980 .030/.0012 59.990/2.3618 65.019/2.5598 .088/.0035 5,7 6 (Fl) 59.971/2.3611 65.000/2.5591 2.490/0.0980 .030/.0012 59.990/2.3618 65.019/2.5598 .088/.0035

20.00/0.787

F780

1538 IH

24.94/0.982

F780

1539 IH

* DIMENSIONAL INFORMATION FOR 7M1539 Overall Width (Nominal) Increase in Width 0.25 mm u/size 30.14 mm +0.20 mm 0.50 mm u/size 30.34 mm +0.40 mm

ENGINE

VIN CYL

152 2494cc (2.5) 2788cc (2.8) Carb. 2788cc (2.8) F.I. (M30) 2985cc (3.0) 2985cc (3.0) (M30) 3210cc (3.2) (M30) 3430cc (3.5) SOHC (M30) 3453cc (3.5) DOHC (S38)

6B1486 Std. .25 .50 .75 1.0

6B1506 Std. .25 .50

L6 L6 L6 L6 L6 L6 L6 L6

Bore x Stroke 86mm x 72mm 86mm x 80mm 86mm x 80mm 89mm x 80mm 89mm x 80mm 89mm x 86mm 92mm x 86mm 93.5mm x 84mm

TORQUE SETTINGS Connecting Rod 38-41 ft.lbs/51-55 Nm Main Bearing 42-46 ft.lbs/56-62 Nm

Rod - for SOHC engines only. 47.975/1.8888 52.000/2.0472 47.991/1.8894 52.010/2.0476

1.989/0.0783 .031/.0012 .073/.0029

20.00/0.787

F820

1486AL IH

Rod - for DOHC engines only. 47.975/1.8888 52.000/2.0472 47.991/1.8894 52.014/2.0478

1.976/0.0778 .056/.0022 .113/.0044

20.00/0.787

F780

1506 IH

BMW Type and Location

Standard Shaft Size

Max. Bearing Thickness

Housing Bore

Vertical Oil Clearance

Max. Overall Length

Material Code

Qty. Set

Bearing Shell No.

Engine Set No. Sizes Available

(Contâ&#x20AC;&#x2122;d.) Main - overflange length increases for undersizes. *See below for dimensional information. 59.969/2.3610 64.999/2.5590 2.490/0.0980 .029/.0011 24.00/0.945 F780 1-3,5-7 59.990/2.3618 65.019/2.5598 .096/.0038

4 (Fl)

59.969/2.3610 59.990/2.3618

64.999/2.5590 65.019/2.5598

2.490/0.0980 .029/.0011 .096/.0038

29.95/1.179

F780

1507 IH

7M1507 Std. .25 .50

1508 IH

* DIMENSIONAL INFORMATION FOR 7M1507 Overall Width (Nominal) Increase in Width 0.25mm u/s shaft 30.15 mm +0.20 mm 0.50 mm u/s shaft 30.35 mm +0.40 mm

ENGINE

VIN CYL

2979cc (3.0) M54B30 (M54)

Bore x Stroke

TORQUE SETTINGS

86mm x 72mm

Rod 44.975/1.7707 44.991/1.7713

48.000/1.8898 48.016/1.8904

1.493/0.0588 .023/.0009 .081/.0032

18.00/0.709

F780

1490 IH

6B1490 Std. .25 .50 .75 1.0

BUICK BUICK ENGINE INDEX Engine Disp.

Notation

112 (1.8) ............... OHC Pontiac Eng 112 (1.8) ............... OHV Chevrolet Eng. 112 (1.8) ............... OHC Pontiac Eng, Turbo 122 (2.0) ............... OHV Chevrolet Eng. 122 (2.0) ............... OHV Chevrolet Eng. 122 (2.0) ............... OHC Pontiac Eng 122 (2.0) ............... OHC Pontiac Eng, Turbo 122 (2.0) ............... OHV Chevrolet Eng. 134 (2.2) ............... OHV Chevrolet Eng. 138 (2.3) ............... DOHC (Olds - Quad 4) 138 (2.3) ............... DOHC (Olds - Quad 4) 146 (2.4) ............... DOHC (Olds - Quad 4) 151 2474cc (2.5)... Pontiac Eng. 151 2474cc (2.5)... Pontiac Eng. 151 2474cc (2.5)... Pontiac Eng. 173 (2.8) ............... Chevrolet Eng. 173 (2.8) ............... Chevrolet Eng. 173 (2.8) ............... Chevrolet Eng. 173 (2.8) ............... Chevrolet Eng. 181 (3.0) ............... 181 (3.0) ............... 189 (3.1) ............... Chevrolet Eng. 189 (3.1) ............... Chevrolet Eng. 189 (3.1) ............... Chevrolet Eng. 196 (3.2) ............... 204 (3.3) ............... 215 (3.5) ............... 225 (3.7) ............... 231 (3.8) ............... 3800 TPI, Supercharged 231 (3.8) ............... Series II, Supercharged 231 (3.8) ............... 231 (3.8) ............... 231 (3.8) ............... Turbo 231 (3.8) ............... Turbo 231 (3.8) ............... Turbo 231 (3.8) ............... Turbo 231 (3.8) ............... Even Fire 231 (3.8) ............... 231 (3.8) ............... 3800 MFI/TPI 231 (3.8) ............... Odd Fire 231 (3.8) ............... Turbo

VIN

Cyl.

0 G J 1 B K M P 4 3 D T 5 R U 7 W X Z E L J M T C N

L4 L4 L4 L4 L4 L4 L4 L4 L4 L4 L4 L4 L4 L4 L4 V6 V6 V6 V6 V6 V6 V6 V6 V6 V6 V6 V8 V6 V6 V6 V6 V6 V6 V6 V6 V6 V6 V6 V6 V6 V6

1 1 2 3 3 7 8 9 A B C C G

Year Line Engine Disp. 82-86 82-82 84-86 87-89 83-84 87-88 87-87 83-86 93-96 92-94 88-95 96-98 80-83 82-92 85-91 80-80 85-89 81-86 82-84 82-85 85-88 00-05 94-99 89-93 78-79 89-93 61-63 64-67 92-95 96-05 78-79 84-88 78-82 86-87 83-83 84-85 77-87 86-86 88-91 75-77 78-78

1 2 1 2 2 1 1 2 3 4 4 5 6 6 6 7 7 7 7 9 9 8 8 8 9 9 10 11 11 11 9 9 9 9 9 9 9 9 11 11 9

231 (3.8) ............... 231 (3.8) ............... 250 (4.1) ............... 250 (4.1) ............... 252 (4.1) ............... 256 (4.2) ............... 260 (4.3) ............... 265 (4.3) ............... 267 (4.4) ............... 301 (4.9) ............... 301 (4.9) ............... 305 (5.0) ............... 305 (5.0) ............... 305 (5.0) ............... 305 (5.0) ............... 307 (5.0) ............... 340 (5.6) ............... 350 (5.7) ............... 350 (5.7) ............... 350 (5.7) ............... 350 (5.7) ............... 350 (5.7) ............... 350 (5.7) ............... 350 (5.7) ............... 350 (5.7) ............... 350 (5.7) ............... 350 (5.7) ............... 364 (6.0) ............... 400 (6.6) ............... 400 (6.6) ............... 401 (6.6) ............... 403 (6.6) ............... 425 (7.0) ............... 430 (7.0) ............... 455 (7.5) ............... 455 (7.5) ............... 455 (7.5) ............... 455 (7.5) ............... 455 (7.5) ............... 455 (7.5) ............... 455 (7.5) ...............

Notation

VIN

Cyl.

Series II 3800 MFI/TPI Chevrolet Eng. Chevrolet Eng.

K L

V6 V6 L6 L6 V6 L6 V8 V8 V8 V8 V8 V8 V8 V8 V8 V8 V8 V8 V8 V8 V8 V8 V8 V8 V8 V8 V8 V8 V8 V8 V8 V8 V8 V8 V8 V8 V8 V8 V8 V8 V8

DOHC Oldsmobile Eng. Pontiac Eng. Chevrolet Eng. Pontiac Eng. Pontiac Eng. Chevrolet Eng. Chevrolet Eng. Chevrolet Eng. Chevrolet Eng. Oldsmobile Eng. Chevrolet Eng.

Chevrolet Eng. Oldsmobile Eng.,Diesel Chevrolet Eng. Oldsmobile Eng.

D 4 S F S J W Y E G H U Y 7 B H J L N P R X

Pontiac Eng.

Oldsmobile Eng.

P R T U V W

Year Line 95-05 90-95 68-71 73-75 80-84 04-06 75-76 80-81 81-82 79-80 77-79 91-91 79-79 78-87 77-78 80-90 66-67 68-71 92-93 81-81 72-77 72-77 77-79 80-85 94-96 77-80 78-80 57-61 68-69 75-75 59-67 77-79 63-66 67-69 70-74 74-74 74-74 72-76 71-74 73-74 72-74

11 11 12 12 9 13 14 16 17 16 16 17 17 17 17 14 18 18 17 18 18 18 17 15 17 14 18 19 21 20 22 14 22 21 21 21 21 21 21 21 21

BUICK MODEL INDEX Model APOLLO APOLLO - SR CENTURION CENTURY

CENTURY - CUSTOM

CID 250 260 350 250 260 350 350 455 189 231 231 231 265 267 301 305 350 350 350 364 455 134 151 173 181 189 196 204 231 231 231 301 305

2474

Liter 4.1 4.3 5.7 4.1 4.3 5.7 5.7 7.5 3.1 3.8 3.8 3.8 4.3 4.4 4.9 5.0 5.7 5.7 5.7 6.0 7.5 2.2 2.5 2.8 3.0 3.1 3.2 3.3 3.8 3.8 3.8 4.9 5.0

Description Chevrolet Eng. Oldsmobile Eng.

Years

73-75 75 73-75 Chevrolet Eng. 75 Oldsmobile Eng. 75 75 72-73 71-73 Chevrolet Eng. 03 80 Even Fire 80-81 Odd Fire 75-77 Pontiac Eng. 80-81 Chevrolet Eng. 81 Pontiac Eng. 80 Chevrolet Eng. 77-81 73-77 Chevrolet Eng. 77 Oldsmobile Eng. 77-81 57-58 73-74 OHV Chevrolet Eng. 93-94 Pontiac Eng. 82-92 Chevrolet Eng. 83-89 82-85 Chevrolet Eng. 94-05 78-79 89-93 79-88 Even Fire 78-79 Odd Fire 75-77 Pontiac Eng. 79 Chevrolet Eng. 77-79

Model CENTURY - CUSTOM

CENTURY - ESTATE WAGON

CENTURY - LIMITED

CENTURY - LUXUS CENTURY - SPECIAL

CID

350 350 350 403 151 173 181 204 231 231 265 301 305 350 134 151 173 181 189 196 204 231 231 265 267 301 305 350 350 455 134 151

Liter

Description

5.7 5.7 Chevrolet Eng. 5.7 Oldsmobile Eng. 6.6 Oldsmobile Eng. 2474

2474

2.5 2.8 3.0 3.3 3.8 3.8 4.3 4.9 5.0 5.7 2.2 2.5 2.8 3.0 3.1 3.2 3.3 3.8 3.8 4.3 4.4 4.9 5.0 5.7 5.7 7.5 2.2 2.5

Pontiac Eng. Chevrolet Eng.

Years 75-77 77-79 77 77

84-89 85-88 84-85 89 84-88 Even Fire 80-81 Pontiac Eng. 80-81 Pontiac Eng. 80 Chevrolet Eng. 80 Oldsmobile Eng. 81 OHV Chevrolet Eng. 93 Pontiac Eng. 82-92 Chevrolet Eng. 83-89 82-85 Chevrolet Eng. 97-05 78-79 89-93 79-88 Even Fire 78-81 Pontiac Eng. 80-81 Chevrolet Eng. 81 Pontiac Eng. 79-80 Chevrolet Eng. 78-80 Oldsmobile Eng. 81 73-74 73-74 OHV Chevrolet Eng. 93-96 Pontiac Eng. 91-92

BUICK BUICK MODEL INDEX (Cont’d.) Model CENTURY - SPECIAL

CENTURY - SPECIAL EDITION CENTURY - SPORT

CENTURY - T-TYPE ELECTRA

ELECTRA - 225

ELECTRA - 225 CUSTOM ELECTRA - 225 LIMITED

ELECTRA - 300 ELECTRA - ESTATE WAGON

ELECTRA - LIMITED

ELECTRA - PARK AVENUE

ELECTRA - PARK AVENUE ULTRA ELECTRA - T-TYPE ELECTRA - ULTRA ESTATE WAGON

GRAN SPORT GS GS 350 GS 400 GS 455 INVICTA LESABRE

CID

Liter

Description

Years

189 196 204 231 231 231 301 305 350

3.1 3.2 3.3 3.8 3.8 3.8 4.9 5.0 5.7

Chevrolet Eng.

189 196 231 231 301 305 181 231 231 401 425 430 455 350 350 403 430 455

3.1 3.2 3.8 3.8 4.9 5.0 3.0 3.8 3.8 6.6 7.0 7.0 7.5 5.7 5.7 6.6 7.0 7.5

Chevrolet Eng.

430 455

7.0 7.5

68-69 70-75

350 350 403 455 181 231

5.7 5.7 Oldsmobile Eng. 6.6 Oldsmobile Eng. 7.5 3.0 3.8

77 77 77 74-75 85 85

301 307 350 350 231 231 252 307 350 350 403 455

4.9 5.0 5.7 5.7 3.8 3.8 4.1 5.0 5.7 5.7 6.6 7.5

80 81-89 80 80-85 87 88-90 80-84 81-84 78-80 78-83 78-79 76

231 231 252 307 350 350 403

3.8 3.8 4.1 5.0 5.7 5.7 6.6

231 231 231 231 350 350 403 455 340 401 350 350 400 455 401 231 231 231 231

3.8 3.8 3.8 3.8 5.7 5.7 6.6 7.5 5.6 6.6 5.7 5.7 6.6 7.5 6.6 3.8 3.8 3.8 3.8

Even Fire Odd Fire Pontiac Eng. Chevrolet Eng. Chevrolet Eng.

Even Fire Pontiac Eng. Chevrolet Eng.

Oldsmobile Eng. Oldsmobile Eng.

Pontiac Eng. Oldsmobile Eng. Oldsmobile Eng. 3800 MFI/TPI Oldsmobile Eng. Oldsmobile Eng. Oldsmobile Eng.

3800 MFI/TPI Oldsmobile Eng. Oldsmobile Eng. Oldsmobile Eng. 3800 MFI/TPI 3800 MFI/TPI 3800 MFI/TPI Oldsmobile Eng. Oldsmobile Eng.

3800 MFI/TPI Even Fire Odd Fire

94-96 78-79 91-93 79 78-79 75-77 79 78-79 79 05 78-79 79-80 78-80 79-80 78 83-84 84-86 86 59-66 65-66 67 73 77-79 77-79 77-79 68-69 70-76

85-87 88-90 80-84 81-84 78-81 78-83 78-79 90 85-87 88-90 89 70-79 77-79 77-79 70-76 67 65-67 70-72 68-69 68-69 70-72 59-63 87-88 88-91 77-81 76-77

Model LESABRE

LESABRE - CUSTOM

LESABRE - ESTATE WAGON

LESABRE - LIMITED

LESABRE - LUXUS LESABRE - SPORT LIMITED PARK AVENUE PARK AVENUE ULTRA RAINIER RAINIER - CXL REATTA REGAL

REGAL - CUSTOM

REGAL - ESTATE REGAL - ESTATE WAGON

CID

Liter

Description

231 252 301 305 307 340 350 350 364 401 403 425 455 181 231 231 231 231 231 252 267 301 305 307 350 350 400 403 455

3.8 4.1 4.9 5.0 5.0 5.6 5.7 5.7 6.0 6.6 6.6 7.0 7.5 3.0 3.8 3.8 3.8 3.8 3.8 4.1 4.4 4.9 5.0 5.0 5.7 5.7 6.6 6.6 7.5

Series II

301 307 350 350 181 231 231 231 231 252 267 301 307 350 350 350 455 231 364 231 231

4.9 5.0 5.7 5.7 3.0 3.8 3.8 3.8 3.8 4.1 4.4 4.9 5.0 5.7 5.7 5.7 7.5 3.8 6.0 3.8 3.8

Pontiac Eng. Oldsmobile Eng.

231 231 231 256 256 231 196 231 231 231 231 252 265 267 301 305 307 350 350 350 455 173 189 231 231 267

3.8 3.8 3.8 4.2 4.2 3.8 3.2 3.8 3.8 3.8 3.8 4.1 4.3 4.4 4.9 5.0 5.0 5.7 5.7 5.7 7.5 2.8 3.1 3.8 3.8 4.4

231

3.8 Even Fire

Pontiac Eng. Chevrolet Eng. Oldsmobile Eng. Oldsmobile Eng. Oldsmobile Eng.

3800 MFI/TPI Even Fire Odd Fire Series II Chevrolet Eng. Pontiac Eng. Chevrolet Eng. Oldsmobile Eng. Oldsmobile Eng. Pontiac Eng. Oldsmobile Eng.

Oldsmobile Eng. 3800 MFI/TPI Even Fire Series II Chevrolet Eng. Pontiac Eng. Oldsmobile Eng. Oldsmobile Eng.

3800 MFI/TPI Series II 3800 MFI/TPI 3800 TPI Series II DOHC DOHC 3800 MFI/TPI Even Fire Odd Fire Series II Pontiac Eng. Chevrolet Eng. Pontiac Eng. Chevrolet Eng. Oldsmobile Eng. Chevrolet Eng. Oldsmobile Eng. Chevrolet Eng. Chevrolet Eng. 3800 MFI/TPI Series II Chevrolet Eng.

Years 99 80-81 77-80 78 81 66-67 68-80 77-81 59-61 60-64 77-78 64 70-75 86 86-88 88-95 78-85 77 96-05 82-84 82 77-78 78 82-85 68-78 77-85 75 77-78 70-76 80 81-90 80 80-85 86 86-88 88-95 79-85 96-05 80-84 82 79-80 81-85 79-80 79-85 74 74 78-80 58 91-94 95-05 91 92-95 96-05 04-05 06 88-91 78-79 79 78-87 75-77 99-00 82-84 80-81 81-82 79-80 77-87 86-87 73-77 77 77-85 73-74 88-89 89-96 90-95 96 82 82-83

BUICK BUICK MODEL INDEX (Cont’d.) Model REGAL - ESTATE WAGON REGAL - GRAN SPORT REGAL - GRAND NATIONAL REGAL - GS REGAL - LIMITED

REGAL - LS REGAL - SPORT REGAL - T-TYPE RIVIERA

RIVIERA - S RIVIERA - T-TYPE ROADMASTER ROADMASTER ESTATE ROADMASTER LIMITED ROADMASTER LIMITED WAGON SKYHAWK

SKYHAWK - CUSTOM

SKYHAWK - LIMITED

SKYHAWK - S SKYHAWK - SPORT SKYHAWK - T-TYPE SKYLARK

CID

Liter

Description

Years

Model SKYLARK

252 305 350

4.1 5.0 Chevrolet Eng. 5.7 Oldsmobile Eng.

82-83 82-83 82-83

231 231

3.8 3800 MFI/TPI 3.8 Series II

92-95 96

231 231 173 189 196 231 231 231 231 252 265 267 301 305 307 350 231 231 231 231 231 231 231 252 307 350 350 401 403 425 430 455 231 307 350 231 252 307 305 350 364

3.8 3.8 2.8 3.1 3.2 3.8 3.8 3.8 3.8 4.1 4.3 4.4 4.9 5.0 5.0 5.7 3.8 3.8 3.8 3.8 3.8 3.8 3.8 4.1 5.0 5.7 5.7 6.6 6.6 7.0 7.0 7.5 3.8 5.0 5.7 3.8 4.1 5.0 5.0 5.7 6.0

84-87 97-04 88-89 89-93 78-79 79-87 90-95 78-87 96 82-84 80-81 81-82 79-80 78-87 86-87 82-83 97-04 78-82 83-86 80-87 88-93 95 95-99 81-84 80-85 77-78 77-85 63-65 77-78 63-66 67-69 70-76 79-80 80 79-80 81-86 81 81 91 92-96 57-58

305 350

5.0 Chevrolet Eng. 5.7 Chevrolet Eng.

91 92-95

350

5.7 Chevrolet Eng.

92-96

350 122 122 231 231 231 112 112 122 122 112 112 122 122 231 231 112 122 122 112 138

5.7 2.0 2.0 3.8 3.8 3.8 1.8 1.8 2.0 2.0 1.8 1.8 2.0 2.0 3.8 3.8 1.8 2.0 2.0 1.8 2.3

146

Series II Chevrolet Eng. Chevrolet Eng. 3800 MFI/TPI Even Fire Series II Pontiac Eng. Chevrolet Eng. Pontiac Eng. Chevrolet Eng. Oldsmobile Eng. Oldsmobile Eng. Series II

3800 MFI/TPI 3800 TPI Series II Oldsmobile Eng. Oldsmobile Eng. Oldsmobile Eng.

Oldsmobile Eng. Oldsmobile Eng. Oldsmobile Eng. Chevrolet Eng. Chevrolet Eng.

Chevrolet Eng. 96 OHC Pontiac Eng 88 OHV Chevrolet Eng. 88-89 78 Even Fire 78-80 Odd Fire 75-77 OHC Pontiac Eng 82-86 OHV Chevrolet Eng. 82 OHC Pontiac Eng 87 OHV Chevrolet Eng. 83-87 OHC Pontiac Eng 82-86 OHV Chevrolet Eng. 82 OHC Pontiac Eng 87 OHV Chevrolet Eng. 83-87 Even Fire 78-80 Odd Fire 76-77 OHC Pontiac Eng 86 OHC Pontiac Eng 87 OHV Chevrolet Eng. 86-87 OHC Pontiac Eng 83-86 DOHC (Olds - Quad 91-92 4) 2.4 DOHC (Olds - Quad 98 4)

SKYLARK - CUSTOM

CID

Liter

151 250 173 189 204 225 231 231 215 260 301 305 340 350 350 350 401 455 138

2474

2.5 4.1 2.8 3.1 3.3 3.7 3.8 3.8 3.5 4.3 4.9 5.0 5.6 5.7 5.7 5.7 6.6 7.5 2.3

146 151 173 181 189 204 231 305 350 350 400 455 SKYLARK - GRAN SPORT

138

SKYLARK - LIMITED

151 189 204 138

2.4 2474

2474

146 151 173 181 189 204 SKYLARK - LUXURY EDITION

SKYLARK - S

SKYLARK - SPORT SKYLARK - SR

SKYLARK - T-TYPE SOMERSET SOMERSET - LIMITED SOMERSET - REGAL SOMERSET - REGAL LIMITED

2474

138 151 204 231 231 260 301 305 350 350 151 173 231 260 301 305 350 350 350 173 151 181 151 181 151 181 151 181

2474

2474 2474 2474 2474

2.5 2.8 3.0 3.1 3.3 3.8 5.0 5.7 5.7 6.6 7.5

Description

Years

Pontiac Eng. Chevrolet Eng. Chevrolet Eng. Chevrolet Eng.

80-91 68-71 80-82 98 91-92 64-67 Even Fire 78-79 Odd Fire 75-77 61-63 Oldsmobile Eng. 75-76 Pontiac Eng. 77 Chevrolet Eng. 77-79 66-67 68-76 Chevrolet Eng. 77-79 Oldsmobile Eng. 77 65-67 72 DOHC (Olds - Quad 88-95 4) DOHC (Olds - Quad 96-97 4) Pontiac Eng. 83-91 Chevrolet Eng. 83-85 86-88 Chevrolet Eng. 94-97 89-93 Even Fire 78-79 Chevrolet Eng. 78-79 68-72 Chevrolet Eng. 78-79 68 70-72

2.3 DOHC (Olds - Quad 4) 2.5 Pontiac Eng. 3.1 Chevrolet Eng. 3.3 2.3 DOHC (Olds - Quad 4) 2.4 DOHC (Olds - Quad 4) 2.5 Pontiac Eng. 2.8 Chevrolet Eng. 3.0 3.1 Chevrolet Eng. 3.3

90-95

2.3 DOHC (Olds - Quad 4) 2.5 Pontiac Eng. 3.3 3.8 Even Fire 3.8 Odd Fire 4.3 Oldsmobile Eng. 4.9 Pontiac Eng. 5.0 Chevrolet Eng. 5.7 5.7 Oldsmobile Eng. 2.5 Pontiac Eng. 2.8 Chevrolet Eng. 3.8 Odd Fire 4.3 Oldsmobile Eng. 4.9 Pontiac Eng. 5.0 Chevrolet Eng. 5.7 5.7 Chevrolet Eng. 5.7 Oldsmobile Eng. 2.8 Chevrolet Eng. 2.5 Pontiac Eng. 3.0 2.5 Pontiac Eng. 3.0 2.5 Pontiac Eng. 3.0

90-91

2.5 Pontiac Eng. 3.0

85 85

90-91 94-97 90-93 88-95 96-97 80-89 80-85 86-88 94-97 89-93

90-91 90-91 78-79 76-77 76 77 77-79 76 77 80-82 80-82 75-77 75-76 77 77 75-76 77 77 83-84 86-87 86-87 86-87 86-87 85 85

BUICK BUICK MODEL INDEX (Contâ&#x20AC;&#x2122;d.) Model SOMERSET - T-TYPE SPECIAL

SPORTWAGON

Type and Location

CID

151 181 250 225 215 350 364 225 340 350

2474

Standard Shaft Size

Liter

Description

2.5 Pontiac Eng. 3.0 4.1 Chevrolet Eng. 3.7 3.5 5.7 6.0 3.7 5.6 5.7 Max. Bearing Thickness

Housing Bore

Years

Model

86 86 68-69 64-67 61-63 68-69 57-58 64-65 66-67 68-72

SPORTWAGON

Vertical Oil Clearance

Max. Overall Length

SUPER WILDCAT WILDCAT - CUSTOM

ENGINE

VIN CYL

Bore x Stroke

112 (1.8) OHC Pontiac Eng 112 (1.8) OHC Pontiac Eng Turbo 122 (2.0) OHC Pontiac Eng 122 (2.0) OHC Pontiac Eng Turbo

0 J K M

84.8mm x 79.5mm 84.8mm x 79.5mm 86mm x 86mm 86mm x 86mm

L4 L4 L4 L4

CID

400 455 364 401 425 430 430 455

Material Code

Liter

Description

6.6 7.5 6.0 6.6 7.0 7.0 7.0 7.5

Qty. Set

Years 68 70 57-58 63-66 64-66 67-69 68-69 70

Bearing Shell No.

Engine Set No. Sizes Available

TORQUE SETTINGS

Connecting Rod 39 ft.lbs/53 Nm Main Bearing 57 ft.lbs/77 Nm

Rod 48.971/1.9280 48.987/1.9286

52.000/2.0472 52.012/2.0477

1.500/0.0591 .013/.0005 .057/.0022

19.30/0.760

F810

Main - overflange length increases for undersizes. *See below for dimensional information. 57.982/2.2828 62.000/2.4409 1.995/0.0785 .015/.0006 19.50/0.768 F780 1,2,4,5 57.995/2.2833 62.013/2.4415 .066/.0026 3 (Fl) 57.982/2.2828 62.000/2.4409 1.995/0.0785 .015/.0006 26.10/1.028 F780 57.995/2.2833 62.013/2.4415 .066/.0026

8 2

2322A U/L 2327 IH 2328 IH

4B2322A Std. .25 .50 .75 1.0

5M1549P .25 .50 .75

* DIMENSIONAL INFORMATION FOR 5M1549P Overall Width (Nominal) Increase in Width 0.25 mm u/s shaft 1.028"/26.10mm +.008"/0.20mm 0.50 mm u/s shaft 1.036"/26.30mm +.016"/0.40mm 0.75 mm u/s shaft 1.036"/26.30mm +.016"/0.40mm Main - overflange length is standard for all sizes. 57.982/2.2828 62.000/2.4409 1.995/0.0785 .015/.0006 1,2,4,5 57.995/2.2833 62.013/2.4415 .066/.0026

19.50/0.768

3 (Fl)

25.90/1.020

57.982/2.2828 57.995/2.2833

62.000/2.4409 62.013/2.4415

1.995/0.0785 .015/.0006 .066/.0026

ENGINE

VIN CYL

Bore x Stroke

112 (1.8) OHV Chevrolet Eng. 122 (2.0) OHV Chevrolet Eng. 122 (2.0) OHV Chevrolet Eng. 122 (2.0) OHV Chevrolet Eng.

G 1 B P

3.50 x 2.91 3.50 x 3.15 3.50 x 3.15 3.50 x 3.15

L4 L4 L4 L4

F780 F780

8 2

2327 IH

5M2329P Std. .25 .50 .75

2329 IH

TORQUE SETTINGS

Connecting Rod 34-40 ft.lbs/47-54 Nm (1.8L engines) Connecting Rod 34-43 ft.lbs/47-58 Nm (2.0L engines) Main Bearing 63-74 ft.lbs/85-101 Nm (1.8L engines) Main Bearing 63-77 ft.lbs/85-105 Nm (2.0L engines)

Rod 50.775/1.9990 50.800/2.0000

53.967/2.1247 53.980/2.1252

1.577/0.0621 .013/.0005 .077/.0030

21.38/0.842

Main - 112(1.8L) engine, 1982 only. 1,2,3 63.360/2.4945 68.250/2.6870 63.383/2.4954 68.273/2.6879 4 (Fl) 63.360/2.4945 68.250/2.6870 63.383/2.4954 68.273/2.6879

2.423/0.0954 .021/.0008 .093/.0037 2.423/0.0954 .021/.0008 .093/.0037

18.72/0.737 23.93/0.942

F780

63.360/2.4945 68.250/2.6870 2.423/0.0954 .021/.0008 63.383/2.4954 68.273/2.6879 .093/.0037 Overflange length remains constant for standard and undersizes.

20.95/0.825

F780

7125 U/L

.021/.0008 .093/.0037 .021/.0008 .093/.0037

18.72/0.737

F780

23.93/0.942

F780

7123 IH 7124 IH

63.360/2.4945 68.250/2.6870 2.423/0.0954 .021/.0008 63.383/2.4954 68.273/2.6880 .093/.0037 Overflange length remains constant for standard and undersizes.

20.95/0.825

F780

Main - 121B,P, (2.0L) engine, 1982-1986 only. 1,2,3 63.360/2.4945 68.250/2.6870 2.423/0.0954 63.383/2.4954 68.273/2.6880 4 (Fl) 63.360/2.4945 68.250/2.6870 2.423/0.0954 63.383/2.4954 68.273/2.6880 5

F780

2370 IH 7123 IH 7162 IH

7125 U/L

4B745P Std. 01 10 20 30 40

5M1524P Std. .25 .50 .75

5M1567P Std. .25 .50 .75 1.0

BUICK Engine Set No. Sizes Available

Type and Location

Standard Shaft Size

Housing Bore

Max. Bearing Thickness

Vertical Oil Clearance

Material Code

Qty. Set

Bearing Shell No.

18.72/0.737

F780

7123 IH

23.93/0.942

F780

7124 IH

(Contâ&#x20AC;&#x2122;d.)

Main - 121,1 (2.0L) engine, 1987-1989 only. 1,2,3,5 63.360/2.4945 68.250/2.6870 2.423/0.0954 .021/.0008 Std. .25 .50 .75 1.0 63.383/2.4954 68.273/2.6880 .093/.0037

5M7124P

4 (Fl)

63.360/2.4945 68.250/2.6870 2.423/0.0954 .021/.0008 63.383/2.4954 68.273/2.6880 .093/.0037 Overflange length remains constant for standard and undersizes.

5C1195S

Cam 1

47.440/1.8677 47.490/1.8697

51.283/2.0190 51.308/2.0200

1.880/0.0741

16.00/0.630

F23

CH-19-1

2,5

47.440/1.8677 47.490/1.8697

51.029/2.0090 51.079/2.0110

1.750/0.0691

16.00/0.630

F23

CH-18-4

3,4

47.440/1.8677 47.490/1.8697

50.775/1.9990 50.825/2.0010

1.630/0.0640

16.13/0.635

F23

CH-18-2

Std.

Max. Overall Length

ENGINE

VIN CYL

Bore x Stroke

134 (2.2) OHV Chevrolet Eng.

88.9mm x 88mm

TORQUE SETTINGS Connecting Rod 38 ft.lbs/52 Nm Main Bearing 70 ft.lbs/95 Nm

Rod

4B745P

50.775/1.9990 50.800/2.0000

Std. 01 10 20 30 40

5M7124P Std. .25 .50 .75 1.0

5C1195S

1.577/0.0621 .013/.0005 .077/.0030

21.38/0.842

F780

2370 IH

18.72/0.737

F780

23.93/0.942

F780

7123 IH 7124 IH

1.880/0.0741

16.00/0.630

F23

CH-19-1

1.750/0.0691

16.00/0.630

F23

CH-18-4

1.630/0.0640

16.13/0.635

F23

CH-18-2

Main 1,2,3,5

63.360/2.4945 68.250/2.6870 2.423/0.0954 63.383/2.4954 68.273/2.6880 4 (Fl) 63.360/2.4945 68.250/2.6870 2.423/0.0954 63.383/2.4954 68.273/2.6880 Overflange length remains constant for standard and undersizes. Cam 1

Std. 2,5 3,4

53.967/2.1247 53.980/2.1252

47.440/1.8677 47.490/1.8697 47.440/1.8677 47.490/1.8697 47.440/1.8677 47.490/1.8697

51.283/2.0190 51.308/2.0200 51.029/2.0090 51.079/2.0110 50.775/1.9990 50.825/2.0010

.021/.0008 .093/.0037 .021/.0008 .093/.0037

ENGINE

VIN CYL

Bore x Stroke

138 (2.3) DOHC (Olds - Quad 4) 138 (2.3) DOHC (Olds - Quad 4)

3 D

3.62 x 3.35 3.62 x 3.35

L4 L4

TORQUE SETTINGS Connecting Rod 18 ft.lbs/25 Nm + 90 deg turn Main Bearing 15 ft.lbs/20 Nm + 90 deg turn

Rod

4B1388P

47.973/1.8887 47.998/1.8897

Std. .25 .50 .75 1.0

5M8511P Std. .25 .50 .75

5M8514P .25 .50 .75

51.166/2.0144 51.191/2.0154

1.580/0.0623 .013/.0005 .051/.0020

Main 1,2,4,5

51.994/2.0470 56.774/2.2352 2.377/0.0936 52.019/2.0480 56.799/2.2362 3 (Fl) 51.994/2.0470 56.774/2.2352 2.377/0.0936 52.019/2.0480 56.799/2.2362 Overflange length remains constant for standard and undersizes.

.013/.0005 .051/.0020 .013/.0005 .051/.0020

22.76/0.896

F780

8516 IH

21.26/0.837

F780

27.76/1.093

F780

8511 U/L 8513 U/L

Main - Alt. set to 5M8511P with +0.004" overflange length increase. *See dimensional information below. 51.994/2.0470 56.774/2.2352 2.377/0.0936 .013/.0005 21.26/0.837 F780 8 1,2,4,5 52.019/2.0480 56.799/2.2362 .051/.0020 3 (Fl)

51.994/2.0470 52.019/2.0480

56.774/2.2352 56.799/2.2362

2.502/0.0985 .013/.0005 (@ 0.25 u/s) .077/.0030

27.86/1.097

F780

* DIMENSIONAL INFORMATION FOR 5M8514P Overall Width (Nominal) Increase in Width 0.25 mm u/s shaft 1.097" +0.004" 0.50 mm u/s shaft 1.097" +0.004" 0.75 mm u/s shaft 1.097" +0.004"

8511 U/L 8514 U/L

BUICK Type and Location

Standard Shaft Size

Max. Bearing Thickness

Housing Bore

Vertical Oil Clearance

ENGINE

VIN CYL

Bore x Stroke

146 (2.4) DOHC (Olds - Quad 4)

3.543 x 3.700

Max. Overall Length

Material Code

Qty. Set

Bearing Shell No.

Engine Set No. Sizes Available

TORQUE SETTINGS

Connecting Rod 18 ft.lbs/25 Nm + 90 deg turn Main Bearing 15 ft.lbs/20 Nm + 90 deg turn

Rod

Main 1,2,4,5 3 (Fl)

47.973/1.8887 47.998/1.8897

51.173/2.0147 51.186/2.0152

1.581/0.0622 .013/.0005 .077/.0030

18.30/0.720

60.000/2.3622 60.023/2.3631 60.000/2.3622 60.023/2.3631

64.778/2.5503 64.798/2.5511 67.778/2.6684 64.798/2.5511

2.376/0.0935 .003/.0001 .072/.0028 2.376/0.0935 .003/.0001 .072/.0028

20.00/0.787 27.74/1.092

F780

F780 F780

8 2

8520 IH 8517 U/L 8518 U/L

Main - Alternate set to 5M2056P with +0.25mm overflange length increase. *See below for dimensional information. 1,2,4,5 60.000/2.3622 64.778/2.5503 2.376/0.0935 .003/.0001 20.00/0.787 F780 8 8517 60.023/2.3631 64.798/2.5511 .072/.0028 U/L 3 (Fl)

60.000/2.3622 60.023/2.3631

64.778/2.5503 64.798/2.5511

2.376/0.0935 .003/.0001 .072/.0028

27.99/1.102

F780

4B1647P Std. .25 .50 .75 1.0

5M2056P Std. .25 .50 .75 1.0

5M8525P .25 .50 .75 1.0

8525 U/L

* DIMENSIONAL INFORMATION FOR 5M8525P Overall Width (Nominal) Increase in Width 0.25mm u/s shaft 27.99 mm +0.25 mm 0.50mm u/s shaft 27.99 mm +0.25 mm 0.75mm u/s shaft 27.99 mm +0.25 mm 1.00mm u/s shaft 27.99 mm +0.25 mm

ENGINE

VIN CYL

Bore x Stroke

151 2474cc (2.5) Pontiac Eng. 151 2474cc (2.5) Pontiac Eng. 151 2474cc (2.5) Pontiac Eng.

5 R U

4.00 x 3.00 4.00 x 3.00 4.00 x 3.00

L4 L4 L4

TORQUE SETTINGS Connecting Rod 30 ft.lbs/41 Nm (except crossflow) Connecting Rod 32 ft.lbs/44 Nm (crossflow) Main Bearing 65 ft.lbs/88 Nm (except crossflow) Main Bearing 70 ft.lbs/95 Nm (crossflow)

Rod - High Strength Aluminum Silicon material. 50.800/2.0000 53.967/2.1247 1.570/0.0618 .014/.0006 50.813/2.0005 53.980/2.1252 .066/.0026

18.84/0.742

Rod - .002" oversize back version of 4B610A. 50.800/2.0000 54.018/2.1267 1.722/0.0678 .015/.0006 50.813/2.0005 54.031/2.1272 (@ .010" u/size) .067/.0026

18.84/0.742

Rod - To be superceded by 4B610A when stock exhausted. 50.800/2.0000 53.967/2.1247 1.570/0.0618 .014/.0006 50.813/2.0005 53.980/2.1252 .066/.0026

18.84/0.742

Rod - To be superceded by 4B610AO/S2 when stock exhausted. 50.800/2.0000 54.018/2.1267 1.722/0.0678 .015/.0006 50.813/2.0005 54.031/2.1272 (@ .010" u/s) .067/.0026

18.84/0.742

Main - for VIN U engines only. 1,2,3,4 58.377/2.2983 63.261/2.4906 58.402/2.2993 63.287/2.4916 1,2,3,4 58.377/2.2983 63.261/2.4906 58.402/2.2993 63.287/2.4916

2.426/0.0955 .007/.0003 .084/.0033 2.426/0.0955 .007/.0003 .084/.0033

5 (Fl)

58.377/2.2983 63.261/2.4906 2.426/0.0955 .007/.0003 58.402/2.2993 63.287/2.4916 .084/.0033 Overflange length remains constant for standard and undersizes. Main - for VIN 5 & VIN R engines only. 1,2,3,4 58.377/2.2983 63.261/2.4906 2.426/0.0955 58.402/2.2993 63.287/2.4916 5 (Fl) 58.377/2.2983 63.261/2.4906 2.426/0.0955 58.402/2.2993 63.287/2.4916 Overflange length remains constant for standard and undersizes.

.007/.0003 .084/.0033 .007/.0003 .084/.0033

20.42/0.804

F810

F780

2226A IH 9070A IH 2226 IH 9070 IH 7132 U 7157 L

20.42/0.804

F780

23.93/0.942

F780

7159 U/L

20.49/0.807

F780

7132 U/L 7133 U/L

25.63/1.009

F780

4B610A Std. 10 20 30 40

4B610AO/S2 10 20 30 40

4B610P Std. 01 10 20 30 40

4B610PO/S2 10 20 30 40

5M1643P Std. 10 20 30 40

5M1733P Std 01 10 20 30 40

BUICK Engine Set No. Sizes Available

Type and Location

Standard Shaft Size

Housing Bore

Vertical Oil Clearance

Max. Overall Length

Material Code

Qty. Set

Bearing Shell No.

(Contâ&#x20AC;&#x2122;d.) 5M7152P

10 20 30 40

58.377/2.2983 63.261/2.4906 58.402/2.2993 63.287/2.4916 Stock not available from fee warehouses.

.010" u/s shaft .020" u/s shaft .030" u/s shaft .040" u/s shaft

5M7163P 10 20 30 40

.010" u/s shaft .020" u/s shaft .030" u/s shaft .040" u/s shaft

Std.

3C1305S Std.

2.426/0.0955 .007/.0003 .084/.0033 2.426/0.0955 .007/.0003 .084/.0033

20.42/0.804

F780

24.18/0.952

F780

7157 L 7163 U/L

21.97/0.865

F23

CH-5-3

Cam - for VIN U engines only. 47.452/1.8682 50.775/1.9990 1,2,3 47.478/1.8692 50.825/2.0010

1.640/0.0644

18.16/0.715

F23

CH-20-1

VIN CYL

Bore x Stroke 3.50 x 2.99 3.50 x 2.99 3.50 x 2.99 3.50 x 2.99

10 20 30 40

7152 U/L

1.640/0.0644

7 W X Z

6B1238AO/S2

Cam - for VIN 5 & VIN R engines only. 47.452/1.8682 50.775/1.9990 1,2,3 47.478/1.8692 50.825/2.0010

173 (2.8) Chevrolet Eng. 173 (2.8) Chevrolet Eng. 173 (2.8) Chevrolet Eng. 173 (2.8) Chevrolet Eng.

Std. 01 10 20 30 40

F780

* DIMENSIONAL INFORMATION FOR 5M7163P Overall Width (Nominal) Increase in Width 0.952" +0.010" 0.952" +0.010" 0.952" +0.010" 0.952" +0.010"

ENGINE

6B1238A

25.88/1.019

Main - Alternate set to 5M1643P with +.010" overflange length increase. * See below for dimensional information. 58.377/2.2983 63.261/2.4906 2.426/0.0955 .007/.0003 20.42/0.804 F780 4 7132 1,2,3,4 58.402/2.2993 63.287/2.4916 .084/.0033 U 58.377/2.2983 63.261/2.4906 58.402/2.2993 63.287/2.4916 5 (Fl) 58.377/2.2983 63.261/2.4906 58.402/2.2993 63.287/2.4916 Stock not available from fee warehouses.

3C1030S

2.426/0.0955 .007/.0003 .084/.0033

* DIMENSIONAL INFORMATION FOR 5M7152P Overall Width (Nominal) Increase in Width 1.019" +0.010" 1.019" +0.010" 1.019" +0.010" 1.019" +0.010"

1,2,3,4

Max. Bearing Thickness

V6 V6 V6 V6

TORQUE SETTINGS Connecting Rod 34-40 ft.lbs/47-54 Nm Main Bearing 63-74 ft.lbs/85-101 Nm

Rod - High Strength Aluminum Silicon material. 50.759/1.9984 54.013/2.1265 1.575/0.0620 .027/.0011 50.785/1.9994 54.039/2.1275 .105/.0041

18.29/0.720

F810

7116A

Rod - .002" Oversize OD version of 6B1238A. 50.759/1.9984 53.962/2.1245 1.727/0.0680 .014/.0006 50.785/1.9994 53.988/2.1255 (@ .010" u/s) .080/.0031

18.29/0.720

F810

9036A IH

BUICK Type and Location

Standard Shaft Size

Housing Bore

Max. Bearing Thickness

Vertical Oil Clearance

Max. Overall Length

Material Code

Qty. Set

Bearing Shell No.

Engine Set No. Sizes Available

(Contâ&#x20AC;&#x2122;d.) Main - alt. to 4M1494P with +0.010" overflange length increase for undersizes. * See below for dimensional information. 63.340/2.4937 68.250/2.6870 2.426/0.0955 .035/.0014 24.64/0.970 F780 2 7117 1 63.363/2.4946 68.275/2.6880 .109/.0043 U/L 2

63.340/2.4937 63.363/2.4946

68.250/2.6870 68.275/2.6880

2.426/0.0955 .035/.0014 .109/.0043

18.85/0.742

F780

7118 U/L

3 (Fl)

63.340/2.4937 63.363/2.4946

68.250/2.6870 68.275/2.6880

2.426/0.0955 .035/.0014 .109/.0043

24.18/0.952

F780

7129 U/L

63.340/2.4937 68.250/2.6870 63.363/2.4946 68.275/2.6880 Stock not available from fee warehouses.

2.426/0.0955 .035/.0014 .109/.0043

31.70/1.248

F780

7120 U/L

.010" u/s shaft .020" u/s shaft .030" u/s shaft .040" u/s shaft

Main - 1985-90 engines with 67.2 mm large journal design. 1,4 67.239/2.6472 72.149/2.8405 2.426/0.0955 .033/.0013 67.264/2.6482 72.174/2.8415 .109/.0043 2 67.239/2.6472 72.149/2.8405 2.426/0.0955 .033/.0013 67.264/2.6482 72.174/2.8415 .109/.0043 3 (Fl) 67.239/2.6472 72.149/2.8405 2.426/0.0955 .033/.0013 67.264/2.6482 72.174/2.8415 .109/.0043 Overflange length remains constant for standard and undersizes.

24.64/0.970

F780

18.85/0.742

F780

23.93/0.942

F780

31.70/1.248

F780

24.80/0.976

F810

18.75/0.738

F810

23.93/0.942

F810

7117 U/L 7118 U/L 7119 U/L 7120 U/L

7237A U/L 7238A U/L 7239A U/L

Main - optional set to 4M2037P with +0.010" overflange length increase for undersizes. *See below for dimensional information. 67.239/2.6472 72.149/2.8405 2.426/0.0955 .025/.0010 24.80/0.976 F780 4 7237 1,4 67.264/2.6482 72.174/2.8415 .102/.0040 U/L 67.239/2.6472 72.149/2.8405 67.264/2.6482 72.174/2.8415 3 (Fl) 67.239/2.6472 72.149/2.8405 67.264/2.6482 72.174/2.8415 To be discontinued when stock exhausted.

4M1493P 10 20 30 40

* DIMENSIONAL INFORMATION FOR 4M1493P Overall Width (Nominal) Increase in Width 0.952" +0.010" 0.952" +0.010" 0.952" +0.010" 0.952" +0.010"

Main - 1980-85 engines with 63.3 mm small journal design. 63.340/2.4937 68.250/2.6870 2.426/0.0955 .035/.0014 1 63.363/2.4946 68.275/2.6880 .109/.0043 2 63.340/2.4937 68.250/2.6870 2.426/0.0955 .035/.0014 63.363/2.4946 68.275/2.6880 .109/.0043 3 (Fl) 63.340/2.4937 68.250/2.6870 2.426/0.0955 .035/.0014 63.363/2.4946 68.275/2.6880 .109/.0043 4 63.340/2.4937 68.250/2.6870 2.426/0.0955 .035/.0014 63.363/2.4946 68.275/2.6880 .109/.0043 Overflange length remains constant for standard and undersizes.

2.426/0.0955 .025/.0010 .102/.0040 2.426/0.0955 .025/.0010 .102/.0040

18.75/0.738

F780

24.18/0.952

F780

4M1494P Std. 10 20 30 40

4M2037A Std. .25 .50 .75 1.0

4M7122P .25 .50 .75 1.0

7238 U/L 7122 U/L

47.440/1.8677 47.490/1.8697 47.440/1.8677 47.490/1.8697 47.440/1.8677 47.490/1.8697

51.029/2.0090 51.079/2.0110 50.775/1.9990 50.825/2.0010 51.029/2.0090 51.079/2.0110

1.760/0.0691

16.00/0.630

F23

CH-18-1A

1.630/0.0640

16.13/0.635

F23

CH-18-2

1.760/0.0691

16.00/0.630

F23

CH-18-4

4C1102S Std.

BUICK Engine Set No. Sizes Available

Standard Shaft Size

Housing Bore

Max. Bearing Thickness

Vertical Oil Clearance

Max. Overall Length

Material Code

Qty. Set

Bearing Shell No.

Cam - optional set to 4C1102S with 0.725" wide #2 and #3 bushes. 47.440/1.8677 51.029/2.0090 1.760/0.0691 16.00/0.630 1 47.490/1.8697 51.079/2.0110

F23

CH-18-1A

2,3

47.440/1.8677 47.490/1.8697

50.775/1.9990 50.825/2.0010

1.630/0.0640

18.42/0.725

F23

CH-18-2A

47.440/1.8677 47.490/1.8697

51.029/2.0090 51.079/2.0110

1.760/0.0691

16.00/0.630

F23

CH-18-4

(Contâ&#x20AC;&#x2122;d.)

4C1102SW Std.

Type and Location

ENGINE

VIN CYL

Bore x Stroke

189 (3.1) Chevrolet Eng. 189 (3.1) Chevrolet Eng. 189 (3.1) Chevrolet Eng.

J M T

3.50 x 3.31 3.50 x 3.31 3.50 x 3.31

6B1238A Std. 01 10 20 30 40

6B1238AO/S2 10 20 30 40

V6 V6 V6

TORQUE SETTINGS Connecting Rod 39 ft.lbs/53 Nm Main Bearing 70 ft.lbs/95 Nm

Rod - High Strength Aluminum Silicon material. 50.759/1.9984 54.013/2.1265 1.575/0.0620 .027/.0011 50.785/1.9994 54.039/2.1275 .105/.0041

18.29/0.720

F810

7116A

Rod - .002" Oversize OD version of 6B1238A. 50.759/1.9984 53.962/2.1245 1.727/0.0680 .014/.0006 50.785/1.9994 53.988/2.1255 (@ .010" u/s) .080/.0031

18.29/0.720

F810

9036A IH

Main - Excl. VIN M 1,4 67.239/2.6472 Std. .25 .50 .75 1.0 67.264/2.6482

4M2037A

72.149/2.8405 72.174/2.8415

2.426/0.0955 .033/.0013 .109/.0043

24.80/0.976

F810

7237A U/L

72.149/2.8405 72.174/2.8415

2.426/0.0955 .033/.0013 .109/.0043

18.75/0.738

F810

7238A U/L

67.239/2.6472 72.149/2.8405 2.426/0.0955 .033/.0013 67.264/2.6482 72.174/2.8415 .109/.0043 Overflange length remains constant for standard and undersizes.

23.93/0.942

F810

7239A U/L

67.239/2.6472 67.264/2.6482

3 (Fl)

4M7122P .25 .50 .75 1.0

Main - optional set to 4M2037P with +0.010" overflange length increase for undersizes. *See below for dimensional information. 1,4 67.239/2.6472 72.149/2.8405 2.426/0.0955 .025/.0010 24.80/0.976 F780 4 7237 67.264/2.6482 72.174/2.8415 .102/.0040 U/L 2 67.239/2.6472 72.149/2.8405 2.426/0.0955 .025/.0010 18.75/0.738 F780 2 7238 67.264/2.6482 72.174/2.8415 .102/.0040 U/L 3 (Fl)

67.239/2.6472 72.149/2.8405 67.264/2.6482 72.174/2.8415 To be discontinued when stock exhausted.

2.426/0.0955 .025/.0010 .102/.0040

24.18/0.952

F780

7122 U/L

* DIMENSIONAL INFORMATION FOR 4M7122P Overall Width (Nominal) Increase in Width 0.25 mm u/s shaft 0.952" +0.010" 0.50 mm u/s shaft 0.952" +0.010" 0.75 mm u/s shaft 0.952" +0.010" 1.00 mm u/s shaft 0.952" +0.010" Main - VIN M - High Strength Aluminum Silicon material. 1,4 67.241/2.6473 72.149/2.8405 Std. .25 .50 .75 1.0 67.267/2.6483 72.174/2.8415

4M7189A

2,3(L)

F810

7187A U/L

18.75/0.738

F810

23.93/0.942

F810

7188A U/L 7189A U

67.241/2.6473 67.267/2.6483 67.241/2.6473 67.267/2.6483

72.149/2.8405 72.174/2.8415 72.149/2.8405 72.174/2.8415

47.440/1.8677 47.490/1.8697

51.029/2.0090 51.079/2.0110

1.760/0.0691

16.00/0.630

F23

CH-18-1A

2,3

47.440/1.8677 47.490/1.8697

50.775/1.9990 50.825/2.0010

1.630/0.0640

16.13/0.635

F23

CH-18-2

47.440/1.8677 47.490/1.8697

51.029/2.0090 51.079/2.0110

1.760/0.0691

16.00/0.630

F23

CH-18-4

3 (Fl)

4C1102S

24.80/0.976

Cam 1

Std.

BUICK Type and Location

Standard Shaft Size

Max. Bearing Thickness

Housing Bore

Vertical Oil Clearance

Max. Overall Length

Material Code

Qty. Set

Bearing Shell No.

Engine Set No. Sizes Available

(Contâ&#x20AC;&#x2122;d.) Cam - optional set to 4C1102S with 0.725" wide #2 and #3 bushes. 47.440/1.8677 51.029/2.0090 1.760/0.0691 1 47.490/1.8697 51.079/2.0110

16.00/0.630

F23

CH-18-1A

2,3

47.440/1.8677 47.490/1.8697

50.775/1.9990 50.825/2.0010

1.630/0.0640

18.42/0.725

F23

CH-18-2A

47.440/1.8677 47.490/1.8697

51.029/2.0090 51.079/2.0110

1.760/0.0691

16.00/0.630

F23

CH-18-4

VIN CYL

Bore x Stroke

181 (3.0) 181 (3.0) 196 (3.2) 204 (3.3) 231 (3.8) 231 (3.8) 231 (3.8) Turbo 231 (3.8) Turbo 231 (3.8) Turbo 231 (3.8) Turbo 231 (3.8) Even Fire 231 (3.8) 231 (3.8) Turbo 252 (4.1)

E L C N 2 3 3 7 8 9 A B G 4

3.80 x 2.66 3.80 x 2.66 3.50 x 3.40 3.70 x 3.16 3.80 x 3.40 3.80 x 3.40 3.80 x 3.40 3.80 x 3.40 3.80 x 3.40 3.80 x 3.40 3.80 x 3.40 3.80 x 3.40 3.80 x 3.40 3.97 x 3.40

TORQUE SETTINGS

Connecting Rod 20 ft.lbs/27 Nm +50 deg (204 engines) Connecting Rod 40 ft.lbs/54 Nm (181, 196, 231, 252 engines)

Main Bearing 110 ft.lbs/150 Nm (181, 196, 231, 252 engines) Main Bearing 26 ft.lbs/35 Nm + 50 deg (204 engines)

Rod - .660" wide bearing for 181, 196, (89-90) 204, (77-88) 231 Type A (even fire), 231 Turbo and 252 engines. 57.117/2.2487 60.295/2.3738 1.572/0.0619 .014/.0006 16.76/0.660 F780 12 2360 57.137/2.2495 60.312/2.3745 .077/.0030 IH Rod - .002" Oversize OD version of 6B1228P. 57.117/2.2487 60.346/2.3758 1.724/0.0679 .005/.0002 57.137/2.2495 60.363/2.3765 (@ .010" u/s) .078/.0031

16.76/0.660

Rod - for 1991-93 204 Type N engines only. 57.117/2.2487 60.300/2.3740 1.570/0.0618 .023/.0009 57.137/2.2495 60.312/2.3745 .081/.0032

18.30/0.720

Rod - .002" Oversize OD version of 6B1443P. 57.117/2.2487 60.351/2.3760 1.722/0.0678 .024/.0009 57.137/2.2495 60.363/2.3765 (@ .010" u/s) .082/.0032

18.30/0.720

F780

9071 IH 2306 IH 9046 IH

Main - alt. set to 4M960P with +0.020" overflange length increase for undersizes.* See below for dimensional information. 63.475/2.4990 68.250/2.6870 2.365/0.0931 .020/.0008 22.07/0.869 F780 4 9015 1,3 63.500/2.5000 68.275/2.6880 .096/.0038 U/L 4

63.475/2.4990 68.250/2.6870 63.500/2.5000 68.275/2.6880 4 63.475/2.4990 68.250/2.6870 63.500/2.5000 68.275/2.6880 2 (Fl) 63.475/2.4990 68.250/2.6870 63.500/2.5000 68.275/2.6880 To be discontinued when stock exhausted.

4C1102SW Std.

ENGINE

V6 V6 V6 V6 V6 V6 V6 V6 V6 V6 V6 V6 V6 V6

2.365/0.0931 .020/.0008 .096/.0038 2.365/0.0931 .020/.0008 .096/.0038 2.365/0.0931 .020/.0008 .096/.0038

22.07/0.869

F780

22.07/0.869

F780

27.38/1.078

F780

* DIMENSIONAL INFORMATION FOR 4M1688P Overall Width (Nominal) Increase in Width .010" u/s shaft 1.078" +0.020" .020" u/s shaft 1.078" +0.020" .030" u/s shaft 1.078" +0.020"

9016 L 9019 U 9018 U/L

6B1228P Std. 01 10 20 30 40

6B1228PO/S2 10 20 30 40

6B1443P Std. 10 20 30 40

6B1443PO/S2 10 20 30 40

4M1688P 10 20 30

BUICK Engine Set No. Sizes Available

Type and Location

Standard Shaft Size

Housing Bore

Max. Bearing Thickness

Vertical Oil Clearance

Max. Overall Length

Material Code

Qty. Set

Bearing Shell No.

(Contâ&#x20AC;&#x2122;d.)

4M1690P 20 30

Main - alt. set to 4M960P with +0.040" overflange length increase for undersizes.* See below for dimensional information. 63.475/2.4990 68.250/2.6870 2.365/0.0931 .020/.0008 22.07/0.869 F780 4 9015 1,3 63.500/2.5000 68.275/2.6880 .096/.0038 U/L 4

63.475/2.4990 63.500/2.5000

68.250/2.6870 68.275/2.6880

2.365/0.0931 .020/.0008 .096/.0038

22.07/0.869

F780

9019 U

63.475/2.4990 63.500/2.5000

68.250/2.6870 68.275/2.6880

2.365/0.0931 .020/.0008 .096/.0038

22.07/0.869

F780

9016 L

63.475/2.4990 68.250/2.6870 63.500/2.5000 68.275/2.6880 Stock not available from fee warehouses.

2.365/0.0931 .020/.0008 .096/.0038

27.89/1.098

F780

9024 U/L

2 (Fl)

* DIMENSIONAL INFORMATION FOR 4M1690P Overall Width (Nominal) Increase in Width .020" u/s shaft 1.098" +0.040" .030" u/s shaft 1.098" +0.040"

4M1747P 10 20 40

Main - alt. set to 4M960P with +0.010" overflange length increase for undersizes.* See below for dimensional information. 1,3 63.475/2.4990 68.250/2.6870 2.365/0.0931 .020/.0008 22.07/0.869 F780 4 9015 63.500/2.5000 68.275/2.6880 .096/.0038 U/L 4 63.475/2.4990 68.250/2.6870 2.365/0.0931 .020/.0008 22.07/0.869 F780 1 9016 63.500/2.5000 68.275/2.6880 .096/.0038 L 4 63.475/2.4990 68.250/2.6870 2.365/0.0931 .020/.0008 22.07/0.869 F780 1 9019 63.500/2.5000 68.275/2.6880 .096/.0038 U 2 (Fl) 63.475/2.4990 68.250/2.6870 2.365/0.0931 .020/.0008 27.13/1.068 F780 2 9020 63.500/2.5000 68.275/2.6880 .096/.0038 U/L To be discontinued when stock exhausted. * DIMENSIONAL INFORMATION FOR 4M1747P Overall Width (Nominal) Increase in Width .010" u/s shaft 1.068" +0.010" .020" u/s shaft 1.068" +0.010" .040" u/s shaft 1.068" +0.010"

Main - half groove, standard oil clearance for (1991-93) 204 engines. 63.470/2.4988 68.250/2.6870 2.377/0.0936 .013/.0005 22.07/0.869 1,3 Std. 10 20 30 40 63.495/2.4998 68.275/2.6880 .081/.0032

4M1822P

1,3,4

63.470/2.4988 63.495/2.4998

68.250/2.6870 68.275/2.6880

2.377/0.0936 .013/.0005 .081/.0032

2 (Fl)

4M9022P 10 20 30 40

.013/.0005 .081/.0032 .013/.0005 .081/.0032

F780

2302 L

22.07/0.869

F780

2302 U

26.87/1.058

F780

22.07/0.869

F780

2303 U/L 2305 L

Main - alt. set to 4M1822P with +0.010" overflange length increase for undersizes.* See below for dimensional information. 63.470/2.4988 68.250/2.6870 2.377/0.0936 .013/.0005 22.07/0.869 F780 2 2302 1,3 63.495/2.4998 68.275/2.6880 .081/.0032 L 1,3,4

63.470/2.4988 68.250/2.6870 63.495/2.4998 68.275/2.6880 2 (Fl) 63.470/2.4988 68.250/2.6870 63.495/2.4998 68.275/2.6880 4 63.470/2.4988 68.250/2.6870 63.495/2.4998 68.275/2.6880 Stock not available from fee warehouses.

.010" u/s shaft .020" u/s shaft .030" u/s shaft .040" u/s shaft

2.377/0.0936 .013/.0005 .081/.0032 2.377/0.0936 .013/.0005 .081/.0032 2.377/0.0936 .013/.0005 .081/.0032

22.07/0.869

F780

27.13/1.068

F780

22.07/0.869

F780

* DIMENSIONAL INFORMATION FOR 4M9022P Overall Width (Nominal) Increase in Width 1.068" +0.010" 1.068" +0.010" 1.068" +0.010" 1.068" +0.010"

2302 U 9022 U/L 2305 L

BUICK Type and Location

Standard Shaft Size

Max. Bearing Thickness

Housing Bore

Vertical Oil Clearance

Max. Overall Length

Material Code

Qty. Set

Bearing Shell No.

Engine Set No. Sizes Available

(Contâ&#x20AC;&#x2122;d.) Main - half groove, standard oil clearance for all engines (204 : 1989-90 only). Set includes modified upper rear main bearing. 1,3 63.475/2.4990 68.250/2.6870 2.365/0.0931 .020/.0008 22.07/0.869 F780 4 9015 63.500/2.5000 68.275/2.6880 .096/.0038 U/L 4 63.475/2.4990 68.250/2.6870 2.365/0.0931 .020/.0008 22.07/0.869 F780 1 9016 63.500/2.5000 68.275/2.6880 .096/.0038 L 4

63.475/2.4990 63.500/2.5000

2.365/0.0931 .020/.0008 .096/.0038

22.07/0.869

F780

9019 U

2 (Fl)

63.475/2.4990 68.250/2.6870 2.365/0.0931 .020/.0008 63.500/2.5000 68.275/2.6880 .096/.0038 Overflange length remains constant for standard and undersizes.

26.87/1.058

F780

9017 U/L

Cam - grooved O/D on #1 bush - alt. to 4C1031S. 45.339/1.7850 48.654/1.9155 1.630/0.0642 1 45.364/1.7860 48.705/1.9175

19.18/0.755

F23

B-11-1B

2,3,4

15.88/0.625

F23

B-9-2

19.18/0.755

F23

B-11-1

15.88/0.625

F23

B-9-2

BP-13-1

45.339/1.7850 45.364/1.7860

68.250/2.6870 68.275/2.6880

48.654/1.9155 48.705/1.9175

4M960P Std. 01 10 20 30 40

4C1031BS Std.

1.630/0.0642

Cam - 1975-1985 engines with 14 bolt oil pan. 45.339/1.7850 48.654/1.9155 1.630/0.0642 1 45.364/1.7860 48.705/1.9175 2,3,4 45.339/1.7850 48.654/1.9155 1.630/0.0642 45.364/1.7860 48.705/1.9175

4C1031S Std.

Cam - Performance version for 1985-93 engines with 20 bolt oil pan. 45.339/1.7850 49.162/1.9355 1.890/0.0744 1,4 45.364/1.7860 49.213/1.9375

19.18/0.755

4C1246C Std.

BP-9-2 Cam - 1985-93 engines with 20 bolt oil pan. 45.339/1.7850 49.162/1.9355 1.890/0.0743 1,4 45.364/1.7860 49.213/1.9375

19.18/0.755

F23

B-13-1

2,3

15.88/0.625

F23

B-9-2

45.339/1.7850 45.364/1.7860

48.654/1.9155 48.705/1.9175

ENGINE 215 (3.5)

Std.

1.630/0.0642

VIN CYL V8

4C1246S

Bore x Stroke 3.50 x 2.80

TORQUE SETTINGS

Connecting Rod 30-45 ft.lbs/41-61 Nm

Rod 50.800/2.0000 50.813/2.0005

53.967/2.1247 53.980/2.1252

ENGINE 225 (3.7) 231 (3.8) 3800 TPI Supercharged 231 (3.8) Series II Supercharged 231 (3.8) 3800 MFI/TPI 231 (3.8) Odd Fire 231 (3.8) Series II 231 (3.8) 3800 MFI/TPI

1.570/0.0618 .014/.0006 .066/.0026

VIN CYL 1 1 C C K L

V6 V6 V6 V6 V6 V6 V6

Bore x Stroke 3.75 x 3.40 3.80 x 3.40 3.80 x 3.40 3.80 x 3.40 3.80 x 3.40 3.80 x 3.40 3.80 x 3.40

18.84/0.742

F810

2226A IH

8B610A Std. 10 20 30 40

TORQUE SETTINGS

Connecting Rod 20 ft.lbs + 50deg/27 Nm + 50deg (for all 231 engines 1988-on)

Connecting Rod 30-40 ft.lbs/41-54 Nm (1964-67 engines) Connecting Rod 40 ft.lbs/54 Nm (1975-77 engines) Main Bearing 110 ft.lbs/156 Nm (1975-77 VIN C engines) Main Bearing 26 ft.lbs + 45deg / 35 Nm + 45deg (1990-95 Vin L engines)

Main Bearing 26 ft.lbs + 50deg / 35 Nm +50deg (1992-99 VIN 1 & K engines)

Main Bearing 65-70 ft.lbs/88-95 Nm (1964 225 engines) Main Bearing 90 ft.lbs/121 Nm (1988-91 VIN C engines) Main Bearing 95-120 ft.lbs/129-162 Nm (1965-67 225 engines) Rod - .660" wide bearing for 1988-90 231 Type C engines. 57.117/2.2487 60.295/2.3738 1.572/0.0619 .014/.0006 57.137/2.2495 60.312/2.3745 .077/.0030

16.76/0.660

Rod - .002" Oversize OD version of 6B1228P. 57.117/2.2487 60.346/2.3758 1.724/0.0679 .005/.0002 57.137/2.2495 60.363/2.3765 (@ .010" u/s) .078/.0031

16.76/0.660

F780

2360 IH 9071 IH

6B1228P Std. 01 10 20 30 40

6B1228PO/S2 10 20 30 40

BUICK Engine Set No. Sizes Available

Type and Location

Standard Shaft Size

Housing Bore

Max. Bearing Thickness

Vertical Oil Clearance

Max. Overall Length

Material Code

Qty. Set

Bearing Shell No.

Rod - for 1990 on 231 Type K,L,1 engines and 1991 231 Type C engines only. 57.117/2.2487 60.300/2.3740 1.570/0.0618 .023/.0009 18.30/0.720 57.137/2.2495 60.312/2.3745 .081/.0032

F780

2306 IH

Rod - .002" Oversize OD version of 6B1443P. 57.117/2.2487 60.351/2.3760 1.722/0.0678 .024/.0009 57.137/2.2495 60.363/2.3765 (@ .010" u/s) .082/.0032

18.30/0.720

F780

9046 IH

Rod - for 1964-67 225 engines and 1975-77 231 Type C (odd fire) engines only. 50.800/2.0000 53.967/2.1247 1.570/0.0618 .014/.0006 18.84/0.742 50.813/2.0005 53.980/2.1252 .066/.0026

F810

2226A IH

Rod - To be superceded by 6B610A when stock exhausted. 50.800/2.0000 53.967/2.1247 1.570/0.0618 .014/.0006 50.813/2.0005 53.980/2.1252 .066/.0026

F780

2226 IH

11 (Contâ&#x20AC;&#x2122;d.) 6B1443P Std. 10 20 30 40

6B1443PO/S2 10 20 30 40

6B610A Std. 10 20 30 40

6B610P Std. 01 10 20 30 40

4M1688P 10 20 30

18.84/0.742

Main - Alt. set to 4M960P with +0.020" overflange length increase for undersizes.* See below for dimensional information. 63.475/2.4990 68.250/2.6870 2.365/0.0931 .020/.0008 22.07/0.869 F780 4 9015 1,3 63.500/2.5000 68.275/2.6880 .096/.0038 U/L 4

63.475/2.4990 63.500/2.5000

68.250/2.6870 68.275/2.6880

2.365/0.0931 .020/.0008 .096/.0038

22.07/0.869

F780

9016 L

63.475/2.4990 63.500/2.5000

68.250/2.6870 68.275/2.6880

2.365/0.0931 .020/.0008 .096/.0038

22.07/0.869

F780

9019 U

63.475/2.4990 68.250/2.6870 63.500/2.5000 68.275/2.6880 To be discontinued when stock exhausted.

2.365/0.0931 .020/.0008 .096/.0038

27.38/1.078

F780

9018 U/L

2 (Fl)

* DIMENSIONAL INFORMATION FOR 4M1688P Overall Width (Nominal) Increase in Width .010" u/s shaft 1.078" +0.020" .020" u/s shaft 1.078" +0.020" .030" u/s shaft 1.078" +0.020"

4M1690P 20 30

Main - alt. set to 4M960P with +0.040" overflange length increase for undersizes.* See below for dimensional information. 1,3 63.475/2.4990 68.250/2.6870 2.365/0.0931 .020/.0008 22.07/0.869 F780 4 9015 63.500/2.5000 68.275/2.6880 .096/.0038 U/L 4 63.475/2.4990 68.250/2.6870 2.365/0.0931 .020/.0008 22.07/0.869 F780 1 9019 63.500/2.5000 68.275/2.6880 .096/.0038 U 4 63.475/2.4990 68.250/2.6870 2.365/0.0931 .020/.0008 22.07/0.869 F780 1 9016 63.500/2.5000 68.275/2.6880 .096/.0038 L 2 (Fl) 63.475/2.4990 68.250/2.6870 2.365/0.0931 .020/.0008 27.89/1.098 F780 2 9024 63.500/2.5000 68.275/2.6880 .096/.0038 U/L Stock not available from fee warehouses. * DIMENSIONAL INFORMATION FOR 4M1690P Overall Width (Nominal) Increase in Width .020" u/s shaft 1.098" +0.040" .030" u/s shaft 1.098" +0.040"

4M1747P 10 20 40

Main - Alt. set to 4M960P with +0.010" overflange length increase for undersizes. *See dimensional information below. 63.475/2.4990 68.250/2.6870 2.365/0.0931 .020/.0008 22.07/0.869 F780 4 9015 1,3 63.500/2.5000 68.275/2.6880 .096/.0038 U/L 4

68.250/2.6870 68.275/2.6880 68.250/2.6870 68.275/2.6880

2.365/0.0931 .020/.0008 .096/.0038 2.365/0.0931 .020/.0008 .096/.0038

22.07/0.869

F780

22.07/0.869

F780

63.475/2.4990 68.250/2.6870 63.500/2.5000 68.275/2.6880 To be discontinued when stock exhausted.

2.365/0.0931 .020/.0008 .096/.0038

27.13/1.068

F780

4 2 (Fl)

63.475/2.4990 63.500/2.5000 63.475/2.4990 63.500/2.5000

* DIMENSIONAL INFORMATION FOR 4M1747P Overall Width (Nominal) Increase in Width .010" u/s shaft 1.068" +0.010" .020" u/s shaft 1.068" +0.010" .040" u/s shaft 1.068" +0.010"

9016 L 9019 U 9020 U/L

BUICK Type and Location

Standard Shaft Size

Housing Bore

Max. Bearing Thickness

Vertical Oil Clearance

Max. Overall Length

Material Code

Qty. Set

Bearing Shell No.

Engine Set No. Sizes Available

(Contâ&#x20AC;&#x2122;d.) Main - half groove, standard oil clearance for 1990-93 Type L engines, 1992-93 Type 1 and 1991 Type C engines only. 63.470/2.4988 68.250/2.6870 2.377/0.0936 .013/.0005 22.07/0.869 F780 2 2302 1,3 63.495/2.4998 68.275/2.6880 .081/.0032 L 1,3,4

63.470/2.4988 63.495/2.4998

68.250/2.6870 68.275/2.6880

2.377/0.0936 .013/.0005 .081/.0032

2 (Fl)

63.470/2.4988 68.250/2.6870 2.377/0.0936 63.495/2.4998 68.275/2.6880 4 63.470/2.4988 68.250/2.6870 2.377/0.0936 63.495/2.4998 68.275/2.6880 Overflange length remains constant for standard and undersizes. Main - for 1994 231 Type L & 1 engines. 63.470/2.4988 68.250/2.6870 1,3 63.495/2.4998 68.275/2.6880

2.377/0.0936 .013/.0005 .081/.0032

1,3,4

63.470/2.4988 68.250/2.6870 2.377/0.0936 63.495/2.4998 68.275/2.6880 2 (Fl) 63.470/2.4988 68.250/2.6870 2.377/0.0936 63.495/2.4998 68.275/2.6880 4 63.470/2.4988 68.250/2.6870 2.377/0.0936 63.495/2.4998 68.275/2.6880 Overflange length remains constant for standard and undersizes. Main - for 1995 on 231 engines. 63.470/2.4988 68.250/2.6870 1,3 63.495/2.4998 68.275/2.6880 1,3,4

.013/.0005 .081/.0032 .013/.0005 .081/.0032

.013/.0005 .081/.0032 .013/.0005 .081/.0032 .013/.0005 .081/.0032

2.377/0.0936 .013/.0005 .081/.0032

.013/.0005 .081/.0032 .013/.0005 .081/.0032 .013/.0005 .081/.0032

22.07/0.869

F780

2302 U

26.87/1.058

F780

22.07/0.869

F780

2303 U/L 2305 L

22.07/0.869

F780

22.07/0.869

F780

26.87/1.058

F780

22.07/0.869

F780

22.07/0.869

F780

22.07/0.869

F780

26.87/1.058

F780

22.07/0.869

F780

2302 L

4M1822P Std. 10 20 30 40

4M2021P Std. 10 20 30 40

2302 U 2303 U/L 2309 L

2299 L

4M2022P Std. 10 20 30 40

2302 U 2303 U/L 2309 L

Main - alt. set to 4M1822P with +0.010" overflange length increase for undersizes.* See below for dimensional information. 1,3 63.470/2.4988 68.250/2.6870 2.377/0.0936 .013/.0005 22.07/0.869 F780 2 2302 63.495/2.4998 68.275/2.6880 .081/.0032 L 1,3,4 63.470/2.4988 68.250/2.6870 2.377/0.0936 .013/.0005 22.07/0.869 F780 3 2302 63.495/2.4998 68.275/2.6880 .081/.0032 U 2 (Fl) 63.470/2.4988 68.250/2.6870 2.377/0.0936 .013/.0005 27.13/1.068 F780 2 9022 63.495/2.4998 68.275/2.6880 .081/.0032 U/L 4 63.470/2.4988 68.250/2.6870 2.377/0.0936 .013/.0005 22.07/0.869 F780 1 2305 63.495/2.4998 68.275/2.6880 .081/.0032 L Stock not available from fee warehouses.

.010" u/s shaft .020" u/s shaft .030" u/s shaft .040" u/s shaft

4M9022P 10 20 30 40

* DIMENSIONAL INFORMATION FOR 4M9022P Overall Width (Nominal) Increase in Width 1.068" +0.010" 1.068" +0.010" 1.068" +0.010" 1.068" +0.010"

Main - half groove, standard oil clearance for 1975-77 & 1988-90 Type C and 1964-67 225 engines only. Set includes modified upper rear main bearing. 1,3 63.475/2.4990 68.250/2.6870 2.365/0.0931 .020/.0008 22.07/0.869 F780 4 9015 63.500/2.5000 68.275/2.6880 .096/.0038 U/L 4 63.475/2.4990 68.250/2.6870 2.365/0.0931 .020/.0008 22.07/0.869 F780 1 9016 63.500/2.5000 68.275/2.6880 .096/.0038 L 4 63.475/2.4990 68.250/2.6870 2.365/0.0931 .020/.0008 22.07/0.869 F780 1 9019 63.500/2.5000 68.275/2.6880 .096/.0038 U 2 (Fl)

63.475/2.4990 68.250/2.6870 2.365/0.0931 .020/.0008 63.500/2.5000 68.275/2.6880 .096/.0038 Overflange length remains constant for standard and undersizes.

26.87/1.058

F780

9017 U/L

4M960P Std. 01 10 20 30 40

BUICK Engine Set No. Sizes Available

Type and Location

Max. Overall Length

Material Code

Qty. Set

Bearing Shell No.

Cam - grooved O/D on #1 bush - alt. to 4C1031S. 45.339/1.7850 48.654/1.9155 1.630/0.0642 1 45.364/1.7860 48.705/1.9175

19.18/0.755

F23

B-11-1B

2,3,4

1.630/0.0642

15.88/0.625

F23

B-9-2

1.630/0.0642

19.18/0.755

F23

B-11-1

1.630/0.0642

15.88/0.625

F23

B-9-2

Cam - Performance version for all engines 1988-95. 45.339/1.7850 49.162/1.9355 1.890/0.0744 1,4 45.364/1.7860 49.213/1.9375

19.18/0.755

BP-13-1

Standard Shaft Size

Housing Bore

Max. Bearing Thickness

Vertical Oil Clearance

11 (Contâ&#x20AC;&#x2122;d.) 4C1031BS Std.

4C1031S Std.

4C1246C Std.

45.339/1.7850 45.364/1.7860

48.654/1.9155 48.705/1.9175

Cam - 231 Type C engines, 1975-1977. 1 45.339/1.7850 48.654/1.9155 45.364/1.7860 48.705/1.9175 2,3,4 45.339/1.7850 48.654/1.9155 45.364/1.7860 48.705/1.9175

BP-9-2

4C1246S Std.

4C1812S Std.

4C506S Std.

4C5108 Std. 10

1SC19549 Std. 10

1SC19580 Std. 10

1SC19581 Std. 10

1SC19582 Std. 10

RB4106 Semi

RB4106-R Ream

Cam - for all engines 1988-95. 45.339/1.7850 49.162/1.9355 1,4 45.364/1.7860 49.213/1.9375

1.890/0.0743

19.18/0.755

F23

B-13-1

2,3

1.630/0.0642

15.88/0.625

F23

B-9-2

Cam - for all engines 1996 on (Full round design). 46.858/1.8448 50.686/1.9955 1.882/0.0741 1,4 46.893/1.8462 50.711/1.9965

18.92/0.745

F23

B-14-1

2,3

1.628/0.0641

16.00/0.630

F23

B-14-2

1.631/0.0642

19.18/0.755

F23

B-6-1

1.631/0.0642

19.18/0.755

F23

B-4-3

1.631/0.0642

19.18/0.755

F23

B-4-4

1.631/0.0642

19.18/0.755

F23

B-4-5

19.00/0.748

F250

5108

15.75/0.620

F250

5109

Cam Tower - Repair Insert for 1988-94 231 engines. 45.339/1.7850 49.836/1.9620 2.230/0.0878 .012/.0005 2,3 45.364/1.7860 49.861/1.9630 .088/.0035

15.75/0.620

F250

19549

Cam Tower - Repair Insert for 1988-94 231 engines. 45.339/1.7850 49.836/1.9620 2.230/0.0878 .012/.0005 1,4 54.364/2.1403 49.861/1.9630 .088/.0035

19.00/0.748

F250

19580

Cam Tower - Repair Insert for 1995 on 231 engines. 46.858/1.8448 51.283/2.0190 2.179/0.0858 .032/.0013 1,4 46.893/1.8462 51.308/2.0200 .118/.0046

19.00/0.748

F250

19581

Cam Tower - Repair Insert for 1995 on 231 engines. 46.858/1.8448 51.283/2.0190 2.176/0.0857 .038/.0015 2,3 46.893/1.8462 51.308/2.0200 .124/.0049

15.75/0.620

F250

19582

F100

RB4106

F100

RB4106-R

45.339/1.7850 45.364/1.7860

46.858/1.8448 46.893/1.8462

48.654/1.9155 48.705/1.9175

50.178/1.9755 50.228/1.9775

Cam - 225 engines, 1964-1967 1 44.577/1.7550 47.892/1.8855 44.602/1.7560 47.943/1.8875 2 43.815/1.7250 47.130/1.8555 43.840/1.7260 47.181/1.8575 3 43.053/1.6950 46.368/1.8255 43.078/1.6960 46.419/1.8275 4 42.291/1.6650 45.606/1.7955 42.316/1.6660 45.657/1.7975

Cam - for all engines 1996 on (OE split type design). 1,4 46.858/1.8448 50.686/1.9955 1.870/0.0736 46.893/1.8462 50.737/1.9975 2,3 46.858/1.8448 50.178/1.9755 1.613/0.0635 46.893/1.8462 50.229/1.9775

.053/.0021 .165/.0065 .059/.0023 .171/.0067

Small End - for 231 engines 1995 on (Exc. supercharged engines). 21.995/0.8659 24.562/0.9670 1.500/0.0591 .007/.0003 21.20/0.835 22.000/0.8661 (Nominal) .022/.0009 Bore allowance on the ID. Small End - for 231 engines 1995 on (Exc. supercharged engines). 21.995/0.8659 24.562/0.9670 1.360/0.0535 21.20/0.835 22.000/0.8661 (Nominal) Ream allowance on the ID.

BUICK Type and Location

Standard Shaft Size

Max. Bearing Thickness

Housing Bore

ENGINE

VIN CYL

250 (4.1) Chevrolet Eng. 250 (4.1) Chevrolet Eng.

L6 L6

Vertical Oil Clearance

Bore x Stroke 3.88 x 3.53 3.88 x 3.53

Max. Overall Length

Material Code

Qty. Set

Bearing Shell No.

Engine Set No. Sizes Available

TORQUE SETTINGS

Connecting Rod 35-45 ft.lbs/48-61 Nm Main Bearing 60-70 ft.lbs/81-95 Nm

Rod 50.775/1.9990 50.800/2.0000

53.967/2.1247 53.980/2.1252

1.577/0.0621 .013/.0005 .077/.0030

21.38/0.842

58.377/2.2983 58.402/2.2993

63.261/2.4906 63.287/2.4916

2.426/0.0955 .007/.0003 .084/.0033

20.49/0.807

58.377/2.2983 58.402/2.2993

63.261/2.4906 63.287/2.4916

2.426/0.0955 .007/.0003 .084/.0033

25.63/1.009

F780

7133 U/L

Cam - engines 1968-1970. 1,4 47.452/1.8682 51.029/2.0090 47.478/1.8692 51.079/2.0110

1.763/0.0694

21.97/0.865

F23

CH-5-2

2,3

Main 1-6 7 (Fl)

F780

6B745P

2370 IH

Std. 01 10 20 30 40

7132 U/L

Std. 10 20 30 40

7M617P

4C399S Std.

47.452/1.8682 47.478/1.8692

50.775/1.9990 50.825/2.0010

1.636/0.0644

21.97/0.865

F23

CH-5-3

Cam - engines 1971-75. 47.452/1.8682 1,2,3,4 47.478/1.8692

50.775/1.9990 50.825/2.0010

1.636/0.0644

21.97/0.865

F23

CH-5-3

4C718S Std.

ENGINE

VIN CYL

Bore x Stroke

256 (4.2) DOHC

93.04 mm x 102 mm Connecting Rod 18 ft.lbs + 110 deg Main Bearing 18 ft.lbs + 180 deg

TORQUE SETTINGS

Rod 56.691/2.2319 56.707/2.2326

60.322/2.3749 60.338/2.3755

1.798/0.0708 .011/.0004 .059/.0023

Rod - .002" oversize OD version of 6B2290A. 56.691/2.2319 60.372/2.3768 1.952/0.0769 .011/.0004 56.707/2.2326 60.388/2.3775 (@ .25mm u/s) .059/.0023 Main 1,2,3,4,6, 7 5 (Fl)

69.967/2.7546 69.982/2.7552 69.967/2.7546 69.982/2.7552

78.069/3.0736 78.087/3.0743 78.069/3.0736 78.087/3.0743

4.044/0.1592 .007/.0003 .050/.0020 4.044/0.1592 .007/.0003 .050/.0020

22.997/0.9054 23.000/0.9055

25.857/1.0180

1.372/0.0540

20.75/0.817

20.68/0.814

F810

F820

25.35/0.998

F820

23.75/0.935

F100

2290A IH 9102A IH MB3781P U/L MB3782P U/L

6B2290A Std. .25 .50 .75 1.0

6B2290AO/S2 .25 .50 .75 1.0

7M2224A Std. 10 20

Small End 223-3664

AB3664 Semi

ENGINE

VIN CYL

Bore x Stroke

260 (4.3) Oldsmobile Eng. 307 (5.0) Oldsmobile Eng. 350 (5.7) Oldsmobile Eng. 403 (6.6) Oldsmobile Eng.

F Y R K

3.50 x 3.39 3.80 x 3.39 4.06 x 3.39 3.50 x 3.39

V8 V8 V8 V8

TORQUE SETTINGS

Connecting Rod 42 ft.lbs/57 Nm Main Bearing 120 ft.lbs/163 Nm (rear bearing cap) Main Bearing 80 ft.lbs/108 Nm (except rear bearing cap)

Rod 53.945/2.1238 53.970/2.1248

57.137/2.2495 57.150/2.2500

1.572/0.0619 .023/.0009 .087/.0034

Rod - .002" oversize OD version of 8B684P. 53.945/2.1238 57.188/2.2515 1.724/0.0679 .024/.0009 53.970/2.1248 57.201/2.2520 (@ .010" u/s) .088/.0035 Main 1(L)

24.76/0.975

63.462/2.4985 68.250/2.6870 2.377/0.0936 .009/.0004 63.487/2.4995 68.275/2.6880 .084/.0033 Overflange length remains constant for standard and undersizes.

3 (Fl)

68.250/2.6870 68.275/2.6880 68.250/2.6870 68.275/2.6880 68.250/2.6870 68.275/2.6880

21.11/0.831

2.377/0.0936 .009/.0004 .084/.0033 2.377/0.0936 .009/.0004 .084/.0033 2.377/0.0936 .009/.0004 .084/.0033

1(U),2,4

63.462/2.4985 63.487/2.4995 63.462/2.4985 63.487/2.4995 63.457/2.4983 63.482/2.4993

21.11/0.831

F780

24.76/0.975

F780

30.35/1.195

F780

41.37/1.629

F780

8500 IH 9041 IH 8502 L 8505 IH 8503 IH 8504 U/L

8B684P Std. 10 20 30 40

8B684PO/S2 10 20 30 40

5M805P Std. 10 20 30 40

BUICK Engine Set No. Sizes Available

Type and Location

Standard Shaft Size

Housing Bore

Max. Bearing Thickness

Vertical Oil Clearance

Max. Overall Length

Material Code

Qty. Set

Bearing Shell No.

14 (Contâ&#x20AC;&#x2122;d.)

5M8603P 10 20 30 40

Main - optional set to 5M805P with overflange length increase for undersizes. * See below for dimensional information. 63.462/2.4985 68.250/2.6870 2.377/0.0936 .009/.0004 24.76/0.975 F780 1 8502 1 63.487/2.4995 68.275/2.6880 .084/.0033 L 1(U),2,4

63.462/2.4985 63.487/2.4995

68.250/2.6870 68.275/2.6880

2.377/0.0936 .009/.0004 .084/.0033

24.76/0.975

F780

8505 IH

3 (Fl)

63.457/2.4983 63.482/2.4993

68.250/2.6870 68.275/2.6880

2.377/0.0936 .009/.0004 .084/.0033

30.61/1.205

F780

8603 IH

63.462/2.4985 68.250/2.6870 63.487/2.4995 68.275/2.6880 Stock not available from fee warehouses.

2.377/0.0936 .009/.0004 .084/.0033

41.37/1.629

F780

8504 U/L

.010" u/s shaft .020" u/s shaft .030" u/s shaft .040" u/s shaft

5C1088S Std.

5C638S Std.

Cam - engines 1977 on. 51.707/2.0357 1 51.727/2.0365 2 51.199/2.0157 51.219/2.0165 3 50.691/1.9957 50.711/1.9965 4 50.183/1.9757 50.203/1.9765 5 49.675/1.9557 49.695/1.9565

Semi

55.067/2.1680 55.105/2.1695 54.560/2.1480 54.597/2.1495 54.051/2.1280 54.090/2.1295 53.543/2.1080 53.581/2.1095 53.035/2.0880 53.073/2.0895

Cam - for 1975-1976 engines. 1 51.707/2.0357 55.067/2.1680 51.727/2.0365 55.105/2.1695 2 51.199/2.0157 54.560/2.1480 51.219/2.0165 54.597/2.1495 3 50.691/1.9957 54.051/2.1280 50.711/1.9965 54.090/2.1295 4 50.183/1.9757 53.543/2.1080 50.203/1.9765 53.581/2.1095 5

RB3049YA20

* DIMENSIONAL INFORMATION FOR 5M8603P Overall Width (Nominal) Increase in Width 1.205" +0.010" 1.205" +0.010" 1.205" +0.010" 1.205" +0.010"

49.675/1.9557 49.695/1.9565

53.035/2.0880 53.073/2.0895

1.640/0.0646

17.60/0.693

F23

O-7-1

1.640/0.0646

17.60/0.693

F23

O-6-2

1.640/0.0646

17.60/0.693

F23

O-6-3

1.640/0.0646

17.60/0.693

F23

O-6-4

1.640/0.0646

17.60/0.693

F23

O-6-5

1.640/0.0646

17.60/0.693

F23

O-6-1

1.640/0.0646

17.60/0.693

F23

O-6-2

1.640/0.0646

17.60/0.693

F23

O-6-3

1.640/0.0646

17.60/0.693

F23

O-6-4

1.640/0.0646

17.60/0.693

F23

O-6-5

23.37/0.920

F100

3049YA20

Small End - for 307 engines only. 24.933/0.9816 27.534/1.0840 (Nominal) (Finish ID Bore Size)

ENGINE

VIN CYL

Bore x Stroke

350 (5.7) Oldsmobile Eng. Diesel

4.06 x 3.39

TORQUE SETTINGS Connecting Rod 42 ft.lbs/57 Nm Main Bearing 120 ft.lbs/163 Nm

Rod

8B684P Std. 10 20 30 40

8B684PO/S2 10 20 30 40

53.945/2.1238 53.970/2.1248

57.137/2.2495 57.150/2.2500

1.572/0.0619 .023/.0009 .087/.0034

Rod - .002" oversize OD version of 8B684P. 53.945/2.1238 57.188/2.2515 1.724/0.0679 .024/.0009 53.970/2.1248 57.201/2.2520 (@ .010" u/s) .088/.0035

21.11/0.831

F780

8500 IH

21.11/0.831

F780

9041 IH

BUICK Type and Location

Standard Shaft Size

Max. Bearing Thickness

Housing Bore

Vertical Oil Clearance

Max. Overall Length

Material Code

Qty. Set

Bearing Shell No.

Engine Set No. Sizes Available

(Contâ&#x20AC;&#x2122;d.) Main 1 1

76.182/2.9993 76.208/3.0003

80.975/3.1880 81.001/3.1890

2.377/0.0936 .013/.0005 .091/.0036

24.87/0.979

76.182/2.9993 76.208/3.0003

80.975/3.1880 81.001/3.1890

2.377/0.0936 .013/.0005 .091/.0036

24.87/0.979

F780

8512 U

24.87/0.979

F780

30.38/1.196

F780

41.28/1.625

F780

8512 IH 8508 IH 8509 U/L

2,4

76.182/2.9993 80.975/3.1880 2.377/0.0936 76.208/3.0003 81.001/3.1890 3 (Fl) 76.182/2.9993 80.975/3.1880 2.377/0.0936 76.208/3.0003 81.001/3.1890 5 76.175/2.9990 80.975/3.1880 2.377/0.0936 76.200/3.0000 81.001/3.1890 Overflange length remains constant for standard and undersizes.

.013/.0005 .091/.0036 .013/.0005 .091/.0036 .013/.0005 .091/.0036

F780

8507 L

Main - optional set to 5M804P with .010" overflange length increase for undersizes. * See below for dimensional information. 76.182/2.9993 80.975/3.1880 2.377/0.0936 .013/.0005 24.87/0.979 F780 1 8507 1 76.208/3.0003 81.001/3.1890 .091/.0036 L 1

76.182/2.9993 80.975/3.1880 76.208/3.0003 81.001/3.1890 2,4 76.182/2.9993 80.975/3.1880 76.208/3.0003 81.001/3.1890 3 (Fl) 76.182/2.9993 80.975/3.1880 76.208/3.0003 81.001/3.1890 5 76.175/2.9990 80.975/3.1880 76.200/3.0000 81.001/3.1890 Stock not available from fee warehouses.

2.377/0.0936 .013/.0005 .091/.0036 2.377/0.0936 .013/.0005 .091/.0036 2.377/0.0936 .013/.0005 .091/.0036 2.377/0.0936 .013/.0005 .091/.0036

24.87/0.979

F780

24.87/0.979

F780

30.63/1.206

F780

41.28/1.625

F780

5M804P Std. 10 20 30 40

5M8519P 20 30 40

8512 U 8512 IH 8519 IH 8509 U/L

* DIMENSIONAL INFORMATION FOR 5M8519P Overall Width (Nominal) Increase in Width .020" u/s shaft 1.206" +0.010" .030" u/s shaft 1.206" +0.010" .040" u/s shaft 1.206" +0.010" Cam 1

51.707/2.0357 51.727/2.0365

55.067/2.1680 55.105/2.1695

1.640/0.0646

17.60/0.693

F23

O-7-1

51.199/2.0157 51.219/2.0165

54.560/2.1480 54.597/2.1495

1.640/0.0646

17.60/0.693

F23

O-6-2

50.691/1.9957 50.711/1.9965 50.183/1.9757 50.203/1.9765 49.675/1.9557 49.695/1.9565

54.051/2.1280 54.090/2.1295 53.543/2.1080 53.581/2.1095 53.035/2.0880 53.073/2.0895

1.640/0.0646

17.60/0.693

F23

O-6-3

1.640/0.0646

17.60/0.693

F23

O-6-4

1.640/0.0646

17.60/0.693

F23

O-6-5

30.353/1.1950 30.391/1.1965

1.575/0.0620

24.77/0.975

F100

02495

4 5

5C1088S Std.

Small End

AB02495 Semi

ENGINE

VIN CYL

Bore x Stroke

265 (4.3) Pontiac Eng. 301 (4.9) Pontiac Eng. 301 (4.9) Pontiac Eng.

S W Y

3.75 x 3.00 4.00 x 3.00 4.00 x 3.00

V8 V8 V8

TORQUE SETTINGS

Connecting Rod 35 ft.lbs/48 Nm Main Bearing 100 ft.lbs/136 Nm (rear bearing cap) Main Bearing 70 ft.lbs/95 Nm (except rear bearing cap)

Rod - .002" oversize OD version of 8B610A (2 sets required per engine). 50.800/2.0000 54.018/2.1267 1.722/0.0678 .015/.0006 18.84/0.742 50.813/2.0005 54.031/2.1272 (@ .010" u/size) .067/.0026

F810

9070A IH

4B610AO/S2 10 20 30 40

Rod 50.800/2.0000 50.813/2.0005

53.967/2.1247 53.980/2.1252

1.570/0.0618 .014/.0006 .066/.0026

18.84/0.742

F810

2226A IH

8B610A Std. 10 20 30 40

BUICK Engine Set No. Sizes Available

Type and Location

Max. Overall Length

Material Code

Qty. Set

Bearing Shell No.

2.375/0.0935 .012/.0005 .089/.0035

21.97/0.865

F780

7134 U/L

2.375/0.0935 .012/.0005 .089/.0035

26.87/1.058

F780

7135 U/L

76.175/2.9990 80.975/3.1880 2.382/0.0938 .011/.0004 76.200/3.0000 81.001/3.1890 .089/.0035 Overflange length remains constant for standard and undersizes.

40.38/1.590

F780

7136 U/L

17.40/0.685

F23

P-3-2

Standard Shaft Size

Housing Bore

76.187/2.9995 76.213/3.0005

80.975/3.1880 81.001/3.1890

76.187/2.9995 76.213/3.0005

80.975/3.1880 81.001/3.1890

Max. Bearing Thickness

Vertical Oil Clearance

16 (Contâ&#x20AC;&#x2122;d.) 5M1415P

Main 1,2,3

Std. 10 20 30 40 4 (Fl) 5

5C292S

Cam 1-5

Std.

48.240/1.8992 48.252/1.8997

51.554/2.0297 51.605/2.0317

1.640/0.0646

ENGINE

VIN CYL

Bore x Stroke

267 (4.4) Chevrolet Eng. 305 (5.0) Chevrolet Eng. 305 (5.0) Chevrolet Eng. 305 (5.0) Chevrolet Eng. 305 (5.0) Chevrolet Eng. 350 (5.7) Chevrolet Eng. 350 (5.7) Chevrolet Eng. 350 (5.7) Chevrolet Eng.

J E G H U 7 L P

3.50 x 3.48 3.74 x 3.48 3.74 x 3.48 3.74 x 3.48 3.74 x 3.48 4.00 x 3.48 4.00 x 3.48 4.00 x 3.48

V8 V8 V8 V8 V8 V8 V8 V8

TORQUE SETTINGS Connecting Rod 35 ft.lbs/48 Nm (11/32" bolts only) Connecting Rod 45 ft.lbs/61 Nm (3/8" bolts only) Main Bearing 75 ft.lbs/102 Nm

Rod

8B663A

53.315/2.0990 53.340/2.1000

Std. 01 10 20 30 40

8B663AO/S2 10 20 30 40

56.507/2.2247 56.520/2.2252

1.575/0.0620 .017/.0007 .081/.0032

Rod - .002" oversize OD version of 8B663A. 53.315/2.0990 56.558/2.2267 1.727/0.0680 .018/.0007 53.340/2.1000 56.571/2.2272 (@ .010" u/s) .082/.0032

21.25/0.837

F810

2376A

21.25/0.837

F810

9026A IH

21.25/0.837

F780

2376 IH

21.25/0.837

F780

9026 IH

Rod

8B663P

53.315/2.0990 53.340/2.1000

Std. 01 10 20 30 40 50 60

8B663PO/S2 10 20 30 40

56.507/2.2247 56.520/2.2252

1.575/0.0620 .017/.0007 .081/.0032

Rod - .002" oversize OD version of 8B663P. 53.315/2.0990 56.558/2.2267 1.727/0.0680 .018/.0007 53.340/2.1000 56.571/2.2272 (@ .010" u/s) .082/.0032

Main - Alt set to 5M909P with +0.020" overflange length increase for undersizes. *See below for dimensional information. 5M1626P 1,2,3,4 62.189/2.4484 67.071/2.6406 2.426/0.0955 .008/.0003 20.50/0.807 F780 8 2377 10 20 30 40 50 60 62.212/2.4493 67.094/2.6415 .079/.0031 U/L 5 (Fl)

62.174/2.4478 62.200/2.4488

.010" u/s shaft .020" u/s shaft .030" u/s shaft .040" u/s shaft .050" u/s shaft .060" u/s shaft

5M1683P 20 30 40

67.071/2.6406 67.094/2.6415

2.426/0.0955 .020/.0008 .091/.0036

44.15/1.738

F780

2379 U/L

* DIMENSIONAL INFORMATION FOR 5M1626P Overall Width (Nominal) Increase in Width 1.738" +0.020" 1.738" +0.020" 1.738" +0.020" 1.738" +0.020" 1.738" +0.020" 1.738" +0.020"

Main - Alt set to 5M909P with +0.040" overflange length increase for undersizes. *See below for dimensional information. 62.189/2.4484 67.071/2.6406 2.426/0.0955 .008/.0003 20.50/0.807 F780 8 2377 1,2,3,4 62.212/2.4493 67.094/2.6415 .079/.0031 U/L 5 (Fl)

62.174/2.4478 62.200/2.4488

67.071/2.6406 67.094/2.6415

2.426/0.0955 .020/.0008 .091/.0036

1.76/0.069

F780

* DIMENSIONAL INFORMATION FOR 5M1683P Overall Width (Nominal) Increase in Width .020" u/s shaft 1.758" +0.040" .030" u/s shaft 1.758" +0.040" .040" u/s shaft 1.758" +0.040"

2355 U/L

BUICK Type and Location

Standard Shaft Size

Max. Bearing Thickness

Housing Bore

Vertical Oil Clearance

Max. Overall Length

Material Code

Qty. Set

Bearing Shell No.

Engine Set No. Sizes Available

(Contâ&#x20AC;&#x2122;d.) Main - Alt set to 5M909P with +0.010" overflange length increase for undersizes. *See below for dimensional information. 1,2,3,4 62.189/2.4484 67.071/2.6406 2.426/0.0955 .008/.0003 20.50/0.807 F780 8 2377 62.212/2.4493 67.094/2.6415 .079/.0031 U/L 5 (Fl) 62.174/2.4478 67.071/2.6406 2.426/0.0955 .020/.0008 43.89/1.728 F780 2 2365 62.200/2.4488 67.094/2.6415 .091/.0036 U/L

.010" u/s shaft .020" u/s shaft .030" u/s shaft .040" u/s shaft .050" u/s shaft .060" u/s shaft

Main 1,2,3,4

62.189/2.4484 67.071/2.6406 2.426/0.0955 62.212/2.4493 67.094/2.6415 5 (Fl) 62.174/2.4478 67.071/2.6406 2.426/0.0955 62.200/2.4488 67.094/2.6415 Overflange length remains constant for standard and undersizes.

.008/.0003 .079/.0031 .020/.0008 .091/.0036

20.50/0.807 43.64/1.718

F810

.008/.0003 .079/.0031 .020/.0008 .091/.0036

20.50/0.807

F780

Cam - Single piece from 5C3349C set (#1 cam). 47.452/1.8682 51.283/2.0190 1.895/0.0746 .025/.0010 47.478/1.8692 51.333/2.0210 .127/.0050

F810

43.64/1.718

F780

19.05/0.750

F830

2377A U/L 2378A U/L

2377 U/L 2378 U/L

3349

19536

Cam - +0.020" O.D. all housing bores 2.0390"/2.0410" (High Performance). Customer to drill oil holes. 47.452/1.8682 51.791/2.0390 2.149/0.0846 .025/.0010 19.05/0.750 F830 5 1-5 47.478/1.8692 51.841/2.0410 .127/.0050

19537

F23

CH-4-1

1.760/0.0694

18.92/0.745

F23

CH-4-2

1.640/0.0646

18.92/0.745

F23

CH-4-3

Cam - standard housing bores (High Performance). 47.452/1.8682 51.283/2.0190 1.895/0.0746 .025/.0010 1 47.478/1.8692 51.333/2.0210 .127/.0050

19.05/0.750

F830

3349

2,5

19.05/0.750

F830

3347

19.05/0.750

F830

3346

ENGINE 340 (5.6) 350 (5.7) 350 (5.7) 350 (5.7) 350 (5.7) 350 (5.7)

5C004AS

5C004BS

5C290S Std.

1.768/0.0696 .025/.0010 .127/.0050 1.641/0.0646 .025/.0010 .127/.0050

VIN CYL

B H J X

1C3349C

Std.

18.92/0.745

3,4

5M909P Std. 01 10 20 30 40 50 60

Std.

1.890/0.0744

51.029/2.0090 51.079/2.0110 50.775/1.9990 50.825/2.0010

5M909A Std. 01 10 20 30 40

Std.

Cam - +0.010" O.D. all housing bores 2.0290"/2.0310" (High Performance). Customer to drill oil holes. 1-5 47.452/1.8682 51.537/2.0290 2.022/0.0796 .025/.0010 19.05/0.750 F830 5 47.478/1.8692 51.587/2.0310 .127/.0050

47.452/1.8682 47.478/1.8692 47.452/1.8682 47.478/1.8692

5M1744P 10 20 30 40 50 60

* DIMENSIONAL INFORMATION FOR 5M1744P Overall Width (Nominal) Increase in Width 1.728" +0.010" 1.728" +0.010" 1.728" +0.010" 1.728" +0.010" 1.728" +0.010" 1.728" +0.010"

Main - half groove. Standard oil clearance. 1,2,3,4 62.189/2.4484 67.071/2.6406 2.426/0.0955 62.212/2.4493 67.094/2.6415 5 (Fl) 62.174/2.4478 67.071/2.6406 2.426/0.0955 62.200/2.4488 67.094/2.6415 Overflange length remains constant for standard and undersizes.

Cam - standard housing bores. 1 47.452/1.8682 51.283/2.0190 47.478/1.8692 51.333/2.0210 2,5 47.452/1.8682 51.029/2.0090 47.478/1.8692 51.079/2.0110 3,4 47.452/1.8682 50.775/1.9990 47.478/1.8692 50.825/2.0010

V8 V8 V8 V8 V8 V8

Bore x Stroke 3.75 x 3.85 3.80 x 3.85 3.80 x 3.85 3.80 x 3.85 3.80 x 3.85 3.80 x 3.85

5C3349C Std.

TORQUE SETTINGS

Connecting Rod 30-40 ft.lbs/41-54 Nm (340 engine only) Connecting Rod 35 ft.lbs/48 Nm (350 engine only) Main Bearing 95 ft.lbs/129 Nm (350 engine only) Main Bearing 95-120 ft.lbs/129-163 Nm (340 engine only)

Rod - .002" oversize OD version of 8B610A (2 sets required per engine). 50.800/2.0000 54.018/2.1267 1.722/0.0678 .015/.0006 18.84/0.742 50.813/2.0005 54.031/2.1272 (@ .010" u/size) .067/.0026

F810

9070A IH

4B610AO/S2 10 20 30 40

BUICK Engine Set No. Sizes Available

Type and Location

Standard Shaft Size

Housing Bore

Max. Bearing Thickness

Vertical Oil Clearance

Max. Overall Length

Material Code

Qty. Set

Bearing Shell No.

18.84/0.742

F780

9070 IH

18.84/0.742

F810

2226A IH

18.84/0.742

F780

2226 IH

22.10/0.870

F780

26.87/1.058

F780

22.10/0.870

F780

7134 U/L 7135 U/L 7137 U/L

18 (Contâ&#x20AC;&#x2122;d.) 4B610PO/S2 10 20 30 40

Rod - To be superceded by 4B610AO/S2 when stock exhausted. 50.800/2.0000 54.018/2.1267 1.722/0.0678 .015/.0006 50.813/2.0005 54.031/2.1272 (@ .010" u/s) .067/.0026 Rod

8B610A

50.800/2.0000 50.813/2.0005

Std. 10 20 30 40

8B610P Std. 01 10 20 30 40

5M1457P Std. 10 20 30

5M7177P 10 20 30 40

Std.

1.570/0.0618 .014/.0006 .066/.0026

Rod - To be superceded by 8B610A when stock exhausted. 50.800/2.0000 53.967/2.1247 1.570/0.0618 .014/.0006 50.813/2.0005 53.980/2.1252 .066/.0026 Main - half groove, standard oil clearance. 1,2,4 76.187/2.9995 80.975/3.1880 2.370/0.0935 76.213/3.0005 81.001/3.1890 3 (Fl) 76.187/2.9995 80.975/3.1880 2.370/0.0935 76.213/3.0005 81.001/3.1890 5 76.187/2.9995 80.975/3.1880 2.370/0.0935 76.213/3.0005 81.001/3.1890 Overflange length remains constant for standard and undersizes.

.020/.0008 .097/.0038 .020/.0008 .097/.0038 .020/.0008 .097/.0038

Main - Atlernate set to 5M1457P with +0.004" overflange length increase. * See dimensional information below. 76.187/2.9995 80.975/3.1880 2.374/0.0935 .020/.0008 22.10/0.870 F780 6 7134 1,2,4 76.213/3.0005 81.001/3.1890 .097/.0038 U/L 3 (Fl) 76.187/2.9995 80.975/3.1880 2.374/0.0935 .020/.0008 26.97/1.062 F780 2 7177 76.213/3.0005 81.001/3.1890 .097/.0038 U/L 5 76.187/2.9995 80.975/3.1880 2.374/0.0935 .020/.0008 22.10/0.870 F780 2 7137 76.213/3.0005 81.001/3.1890 .097/.0038 U/L To be discontinued when stock exhausted.

.010" u/s shaft .020" u/s shaft .030" u/s shaft .040" u/s shaft

5C680S

53.967/2.1247 53.980/2.1252

* DIMENSIONAL INFORMATION FOR 5M7177P Overall Width (Nominal) Increase in Width 1.062" +0.004" 1.062" +0.004" 1.062" +0.004" 1.062" +0.004"

Cam - 350 B/H/J/X engines, 1968-1981. 45.339/1.7850 48.654/1.9155 1 45.364/1.7860 48.705/1.9175

1.630/0.0642

19.18/0.755

F23

B-11-1

2-5

1.630/0.0642

15.88/0.625

F23

B-9-2

45.339/1.7850 45.364/1.7860

ENGINE

48.654/1.9155 48.705/1.9175

VIN CYL

364 (6.0)

Bore x Stroke 4.125 x 3.40

TORQUE SETTINGS Connecting Rod 40-45 ft.lbs/54-60 Nm Main Bearing 100-110 ft.lbs/136-150 Nm

Rod

8B762P Std. 10 20 30

5C361S

Cam 1

Std. 2 3 4 5

57.125/2.2490 57.150/2.2500

60.300/2.3740 60.312/2.3745

1.572/0.0619 .018/.0007 .081/.0032

20.98/0.826

F780

2350 IH

45.339/1.7850 45.364/1.7860

48.654/1.9155 48.704/1.9175

1.633/0.0643

19.20/0.755

F23

B-4-1

44.577/1.7550 44.602/1.7560 43.815/1.7250 43.840/1.7260 43.053/1.6950 43.078/1.6960

47.892/1.8855 47.942/1.8875 47.130/1.8555 47.180/1.8575 46.368/1.8255 46.418/1.8275

1.631/0.0642

19.20/0.755

F23

B-6-1

1.633/0.0643

19.20/0.755

F23

B-4-3

1.633/0.0643

19.20/0.755

F23

B-4-4

42.291/1.6650 42.316/1.6660

45.606/1.7955 45.656/1.7975

1.633/0.0643

19.20/0.755

F23

B-4-5

BUICK Type and Location

Standard Shaft Size

Max. Bearing Thickness

Housing Bore

Vertical Oil Clearance

ENGINE

VIN CYL

Bore x Stroke

400 (6.6) Pontiac Eng.

4.12 x 3.75

Max. Overall Length

Material Code

Qty. Set

Bearing Shell No.

Engine Set No. Sizes Available

TORQUE SETTINGS

Connecting Rod 45 ft.lbs/61 Nm Main Bearing 120 ft.lbs/163 Nm (rear bearing cap) Main Bearing 95 ft.lbs/129 Nm (except rear bearing cap)

Rod 57.117/2.2487 57.142/2.2497

60.312/2.3745 60.325/2.3750

1.572/0.0619 .026/.0010 .090/.0035

22.37/0.881

F780

7140 IH

Main - Alt set to 5M496P with +0.010" overflange length increase. * See below for dimensional information. 76.175/2.9990 80.975/3.1880 2.382/0.0938 .011/.0004 23.82/0.938 F780 6 7138 1,2,3 76.200/3.0000 81.001/3.1890 .088/.0035 U/L 4 (Fl)

76.175/2.9990 80.975/3.1880 76.200/3.0000 81.001/3.1890 5 76.175/2.9990 80.975/3.1880 76.200/3.0000 81.001/3.1890 To be discontinued when stock exhausted.

.010" u/s shaft .020" u/s shaft .030" u/s shaft .040" u/s shaft Main 1,2,3

76.175/2.9990 76.200/3.0000

80.975/3.1880 81.001/3.1890

2.382/0.0938 .009/.0004 .086/.0034 2.382/0.0938 .011/.0004 .088/.0035

2.382/0.0938 .011/.0004 .088/.0035

76.175/2.9990 80.975/3.1880 2.382/0.0938 76.200/3.0000 81.001/3.1890 5 76.175/2.9990 80.975/3.1880 2.382/0.0938 76.200/3.0000 81.001/3.1890 Overflange length remains constant for standard and undersizes. 48.240/1.8992 48.252/1.8997

ENGINE 400 (6.6) 430 (7.0) 455 (7.5) 455 (7.5) 455 (7.5) 455 (7.5) 455 (7.5) 455 (7.5) 455 (7.5)

51.554/2.0297 51.605/2.0317

.009/.0004 .086/.0034 .011/.0004 .088/.0035

1.640/0.0646

40.38/1.590

F780

7149 U/L 7136 U/L

23.82/0.938

F780

28.85/1.136

F780

40.38/1.590

F780

17.40/0.685

F23

7138 U/L

5M496P Std. 10 20 30 40

7139 U/L 7136 U/L

P-3-2

5C292S Std.

VIN CYL

P R T U V W

F780

5M2496P 10 20 30 40

* DIMENSIONAL INFORMATION FOR 5M2496P Overall Width (Nominal) Increase in Width 1.146" +0.010" 1.146" +0.010" 1.146" +0.010" 1.146" +0.010"

4 (Fl)

Cam 1-5

29.10/1.146

8B758P Std. 10 20 30 40

V8 V8 V8 V8 V8 V8 V8 V8 V8

Bore x Stroke 4.04 x 3.90 4.19 x 3.90 4.31 x 3.90 4.31 x 3.90 4.31 x 3.90 4.31 x 3.90 4.31 x 3.90 4.31 x 3.90 4.31 x 3.90

TORQUE SETTINGS

Connecting Rod 40-50 ft.lbs/54-68 Nm (400,430 engines only)

Connecting Rod 45 ft.lbs/61 Nm (455 engine only) Main Bearing 110 ft.lbs/150 Nm (455 engine only) Main Bearing 80-115 ft.lbs/108-156 Nm (400,430 engines only)

Rod 57.125/2.2490 57.150/2.2500

60.300/2.3740 60.312/2.3745

1.572/0.0619 .018/.0007 .081/.0032

20.98/0.826

F780

2350 IH

Main - Alternate set to 5M908P with +0.010" overflange length increase. * See below for dimensional information. 82.537/3.2495 87.325/3.4380 2.380/0.0937 .028/.0011 20.50/0.807 F780 6 7173 1,2,4 82.550/3.2500 87.351/3.4390 .091/.0036 U/L 3 (Fl)

82.537/3.2495 87.325/3.4380 82.550/3.2500 87.351/3.4390 5 82.537/3.2495 87.325/3.4380 82.550/3.2500 87.351/3.4390 Stock not available from fee warehouses.

2.380/0.0937 .028/.0011 .091/.0036 2.380/0.0937 .028/.0011 .091/.0036

27.12/1.068

F780

29.16/1.148

F780

* DIMENSIONAL INFORMATION FOR 5M7185P Overall Width (Nominal) Increase in Width .020" u/s shaft 1.068" +0.010" .030" u/s shaft 1.068" +0.010" .040" u/s shaft 1.068" +0.010"

7185 U/L 7174 U/L

8B762P Std. 10 20 30

5M7185P 20 30 40

BUICK Engine Set No. Sizes Available

Type and Location

Max. Overall Length

Material Code

Qty. Set

Bearing Shell No.

Main - half groove, standard oil clearance. 82.537/3.2495 87.325/3.4380 2.380/0.0937 .028/.0011 1,2,4 82.550/3.2500 87.351/3.4390 .091/.0036

20.50/0.807

F780

7173 U/L

3 (Fl)

2.380/0.0937 .028/.0011 .091/.0036

26.87/1.058

F780

7175 U/L

82.537/3.2495 87.325/3.4380 2.380/0.0937 .028/.0011 82.550/3.2500 87.351/3.4390 .091/.0036 Overflange length remains constant for standard and undersizes.

29.16/1.148

F780

7174 U/L

Standard Shaft Size

Housing Bore

Max. Bearing Thickness

Vertical Oil Clearance

21 (Contâ&#x20AC;&#x2122;d.) 5M908P Std. 10 20 30

82.537/3.2495 82.550/3.2500

87.325/3.4380 87.351/3.4390

5C680S

Cam 1

Std. 2-5

45.339/1.7850 45.364/1.7860

48.654/1.9155 48.705/1.9175

1.630/0.0642

19.18/0.755

F23

B-11-1

45.339/1.7850 45.364/1.7860

48.654/1.9155 48.705/1.9175

1.630/0.0642

15.88/0.625

F23

B-9-2

ENGINE

VIN CYL

401 (6.6) 425 (7.0)

V8 V8

Bore x Stroke 4.19 x 3.64 4.31 x 3.64

TORQUE SETTINGS Connecting Rod 40-45 ft.lbs/54-61 Nm (1959-64 engines only)

Connecting Rod 40-50 ft.lbs/54-68 Nm (1965-66 engines only)

Main Bearing 100-110 ft.lbs/135-150 Nm (1959-64 engines only)

Main Bearing 95-120 ft.lbs/128-162 Nm (1965-66 engines only) Rod

8B762P

57.125/2.2490 57.150/2.2500

60.300/2.3740 60.312/2.3745

1.572/0.0619 .018/.0007 .081/.0032

20.98/0.826

F780

2350 IH

45.339/1.7850 45.364/1.7860

48.654/1.9155 48.704/1.9175

1.633/0.0643

19.20/0.755

F23

B-4-1

44.577/1.7550 44.602/1.7560

47.892/1.8855 47.942/1.8875

1.631/0.0642

19.20/0.755

F23

B-6-1

43.815/1.7250 43.840/1.7260

47.130/1.8555 47.180/1.8575

1.633/0.0643

19.20/0.755

F23

B-4-3

43.053/1.6950 43.078/1.6960 42.291/1.6650 42.316/1.6660

46.368/1.8255 46.418/1.8275 45.606/1.7955 45.656/1.7975

1.633/0.0643

19.20/0.755

F23

B-4-4

1.633/0.0643

19.20/0.755

F23

B-4-5

Std. 10 20 30

5C361S

Cam 1

Std.

CADILLAC CADILLAC ENGINE INDEX Engine Disp. 112 (1.8) ............... 122 (2.0) ............... 173 (2.8) ............... 250 (4.1) ............... 250 (4.1) ............... 252 (4.1) ............... 260 (4.3) ............... 273 (4.5) ............... 273 (4.5) ............... 273 (4.5) ............... 300 (4.9) ............... 305 (5.0) ............... 307 (5.0) ............... 307 (5.0) ............... 325 (5.3) ............... 346 (5.7) ............... 350 (5.7) ...............

Notation

VIN

Cyl.

Chevrolet Eng. OHV Chevrolet Eng. Chevrolet Eng. Aluminum Block Aluminum Block Buick Eng. (Even Fire) Oldsmobile Eng.,Diesel Aluminum Block Aluminum Block Aluminum Block Aluminum Block Chevrolet Eng. Oldsmobile Eng. Oldsmobile Eng. Vortec 5300

G P W 7 8 4 T 3 5 8 B E 9 Y T S 7

L4 L4 V6 V8 V8 V6 V6 V8 V8 V8 V8 V8 V8 V8 V8 V8 V8

Chevrolet Eng.

Year Line Engine Disp. 82-82 83-86 85-88 87-88 82-87 80-82 85-85 90-90 88-90 89-92 91-95 91-92 87-90 86-90 02-05 04-05 90-93

1 1 2 3 3 4 5 3 3 3 3 6 7 7 8 8 11

350 (5.7) ............... 350 (5.7) ............... 350 (5.7) ............... 350 (5.7) ............... 350 (5.7) ............... 350 (5.7) ............... 364 (6.0) ............... 364 (6.0) ............... 368 (6.0) ............... 368 (6.0) ............... 425 (7.0) ............... 425 (7.0) ............... 472 (7.7) ............... 472 (7.7) ............... 500 (8.2) ............... 500 (8.2) ...............

Notation

VIN

Cyl.

Oldsmobile Eng. Oldsmobile Eng. Oldsmobile Eng.,Diesel Chevrolet Eng. Chevrolet Eng. Oldsmobile Eng. Vortec 6000 Vortec 6000

8 B N P R R N U 6 9 S T

V8 V8 V8 V8 V8 V8 V8 V8 V8 V8 V8 V8 V8 V8 V8 V8

R S

Year Line 80-80 78-79 78-85 94-96 99-00 76-77 02-06 06-06 80-84 80-84 77-79 77-79 68-71 72-74 70-71 72-76

10 10 9 11 11 10 8 8 12 12 12 12 12 12 12 12

CADILLAC MODEL INDEX Model ALLANTE

CID

Liter

Description

Years

250 273 472 500 112 122 173

4.1 4.5 7.7 8.2 1.8 2.0 2.8

DEVILLE

368 425 500 346 364 252

80-84 77-79 75-76 04-05 06 80-82

DEVILLE - TOURING ELDORADO

260 250 273 300 350 368 425 472 500 300 252 250 273 300 350 368 425 472 500

6.0 7.0 8.2 5.7 6.0 Vortec 6000 4.1 Buick Eng. (Even Fire) 4.3 Oldsmobile Eng. 4.1 Aluminum Block 4.5 Aluminum Block 4.9 Aluminum Block 5.7 Oldsmobile Eng. 6.0 7.0 7.7 8.2 4.9 Aluminum Block 4.1 Buick Eng. (Even Fire) 4.1 Aluminum Block 4.5 Aluminum Block 4.9 Aluminum Block 5.7 Oldsmobile Eng. 6.0 7.0 7.7 8.2

250 325 350 364 364 364 260

4.1 5.3 5.7 6.0 6.0 6.0 4.3

84-85 02-05 99-00 02-06 03-06 02-06 85

CALAIS CIMARRON COMMERCIAL CHASSIS CTS - V

ELDORADO BIARRITZ ESCALADE ESCALADE - ESV ESCALADE - EXT FLEETWOOD

Aluminum Block Aluminum Block

87-88 89-92 68-74 75-76 Chevrolet Eng. 82 OHV Chevrolet Eng. 83-86 Chevrolet Eng. 85-88

Aluminum Block Vortec 5300 Chevrolet Eng. Vortec 6000 Vortec 6000 Vortec 6000 Oldsmobile Eng.

85 82-87 88-90 91-95 79-84 80-81 77-79 68-74 74-76 91-93 81-82 82-87 88-90 91-93 79-85 80-81 77-78 68-69 70-76

Model FLEETWOOD

FLEETWOOD - 60 SPECIAL

FLEETWOOD - 60 SPECIAL BROUGHAM FLEETWOOD - 75 FLEETWOOD BROUGHAM

FLEETWOOD Dâ&#x20AC;&#x2122;ELEGANCE FLEETWOOD FORMAL SEVILLE

SEVILLE - STS

CID

Liter

Description

Years

250 273 300 350 368 425 472 500

4.1 4.5 4.9 5.7 6.0 7.0 7.7 8.2

Aluminum Block Aluminum Block Aluminum Block Chevrolet Eng.

85-87 88-90 91-92 92-96 80-84 77-79 68-74 76

250 273 300 472 500

4.1 Aluminum Block 4.5 Aluminum Block 4.9 Aluminum Block 7.7 8.2

87 88-90 91-93 68-74 75-76

500 250 472 500

8.2 4.1 Aluminum Block 7.7 8.2

74 86 68-74 75-76

252

80-82

250 305 307 350 350 368 425 472

4.1 Buick Eng. (Even Fire) 4.1 Aluminum Block 5.0 Chevrolet Eng. 5.0 Oldsmobile Eng. 5.7 Chevrolet Eng. 5.7 Oldsmobile Eng. 6.0 7.0 7.7

250 273

4.1 Aluminum Block 4.5 Aluminum Block

87 88

368 425 252

6.0 7.0 4.1 Buick Eng. (Even Fire) 4.1 Aluminum Block 4.5 Aluminum Block 4.9 Aluminum Block 5.7 Oldsmobile Eng. 6.0 4.5 Aluminum Block 4.9 Aluminum Block

80-84 77-79 81-82

250 273 300 350 368 273 300

82-85 91-92 86-90 90-96 79-85 80-81 77-79 68-70

82-87 88-90 91-93 76-85 80-81 90 91-92

CADILLAC Engine Set No. Sizes Available

Type and Location

Standard Shaft Size

Housing Bore

Max. Bearing Thickness

Vertical Oil Clearance

ENGINE

VIN CYL

Bore x Stroke

112 (1.8) Chevrolet Eng. 122 (2.0) OHV Chevrolet Eng.

G P

3.50 x 2.91 3.50 x 3.15

L4 L4

Max. Overall Length

Material Code

Qty. Set

Bearing Shell No.

TORQUE SETTINGS Connecting Rod 34-43 ft.lbs/47-58 Nm Main Bearing 63-77 ft.lbs/85-105 Nm

Rod

4B745P

50.775/1.9990 50.800/2.0000

53.967/2.1247 53.980/2.1252

1.577/0.0621 .013/.0005 .077/.0030

21.38/0.842

F780

2370 IH

Main - 112 (1.8L) engine, 1982 only. 63.360/2.4945 68.250/2.6870 1,2,3 63.383/2.4954 68.273/2.6879

2.423/0.0954 .021/.0008 .093/.0037

18.72/0.737

F780

7123 IH

2.423/0.0954 .021/.0008 .093/.0037 2.423/0.0954 .021/.0008 .093/.0037

23.93/0.942

F780

20.95/0.825

F780

7162 IH 7125 U/L

18.72/0.737

F780

23.93/0.942

F780

20.95/0.825

F780

1.880/0.0741

16.00/0.630

F23

CH-19-1

1.750/0.0691

16.00/0.630

F23

CH-18-4

1.630/0.0640

16.13/0.635

F23

CH-18-2

Std. 01 10 20 30 40

5M1524P Std. .25 .50 .75

4 (Fl) 5

63.360/2.4945 63.383/2.4954 63.360/2.4945 63.383/2.4954

68.250/2.6870 68.273/2.6879 68.250/2.6870 68.273/2.6879

Main - 122 (2.0L) engine only. 1,2,3 63.360/2.4945 68.250/2.6870 2.423/0.0954 Std. .25 .50 .75 1.0 63.383/2.4954 68.273/2.6880 4 (Fl) 63.360/2.4945 68.250/2.6870 2.423/0.0954 63.383/2.4954 68.273/2.6880 5 63.360/2.4945 68.250/2.6870 2.423/0.0954 63.383/2.4954 68.273/2.6880 Overflange length remains constant for standard and undersizes.

5M1567P

5C1195S

Cam 1

Std. 2,5 3,4

47.440/1.8677 47.490/1.8697 47.440/1.8677 47.490/1.8697 47.440/1.8677 47.490/1.8697

51.283/2.0190 51.308/2.0200 51.029/2.0090 51.079/2.0110 50.775/1.9990 50.825/2.0010

.021/.0008 .093/.0037 .021/.0008 .093/.0037 .021/.0008 .093/.0037

ENGINE

VIN CYL

Bore x Stroke

173 (2.8) Chevrolet Eng.

3.50 x 2.99

6B1238A Std. 01 10 20 30 40

6B1238AO/S2 10 20 30 40

4M1493P 10 20 30 40

7123 IH 7124 IH 7125 U/L

TORQUE SETTINGS Connecting Rod 34-40 ft.lbs/47-54 Nm Main Bearing 63-74 ft.lbs/85-101 Nm

Rod - High Strength Aluminum Silicon material. 50.759/1.9984 54.013/2.1265 1.575/0.0620 .027/.0011 50.785/1.9994 54.039/2.1275 .105/.0041

18.29/0.720

F810

7116A

Rod - .002" oversize back version of 6B1238A. 50.759/1.9984 53.962/2.1245 1.727/0.0680 .014/.0006 50.785/1.9994 53.988/2.1255 (@ .010" u/s) .080/.0031

18.29/0.720

F810

9036A IH

Main - optional set to 4M1494P with +0.010" overflange length increase for undersizes. *See below for dimensional information. 63.340/2.4937 68.250/2.6870 2.426/0.0955 .035/.0014 24.64/0.970 F780 2 7117 1 63.363/2.4946 68.275/2.6880 .109/.0043 U/L 2

63.340/2.4937 68.250/2.6870 63.363/2.4946 68.275/2.6880 3 (Fl) 63.340/2.4937 68.250/2.6870 63.363/2.4946 68.275/2.6880 4 63.340/2.4937 68.250/2.6870 63.363/2.4946 68.275/2.6880 Stock not available from fee warehouses.

.010" u/s shaft .020" u/s shaft .030" u/s shaft .040" u/s shaft

2.426/0.0955 .035/.0014 .109/.0043 2.426/0.0955 .035/.0014 .109/.0043 2.426/0.0955 .035/.0014 .109/.0043

18.85/0.742

F780

24.18/0.952

F780

31.70/1.248

F780

* DIMENSIONAL INFORMATION FOR 4M1493P Overall Width (Nominal) Increase in Width 0.952" +0.010" 0.952" +0.010" 0.952" +0.010" 0.952" +0.010"

7118 U/L 7129 U/L 7120 U/L

CADILLAC Type and Location

Standard Shaft Size

Max. Bearing Thickness

Housing Bore

Vertical Oil Clearance

Max. Overall Length

Material Code

Qty. Set

Bearing Shell No.

Engine Set No. Sizes Available

(Contâ&#x20AC;&#x2122;d.) Main - 1985 engines only with 2.4937"/2.4946" shaft. 63.340/2.4937 68.250/2.6870 2.426/0.0955 .035/.0014 1 63.363/2.4946 68.275/2.6880 .109/.0043

24.64/0.970

18.85/0.742

F780

7118 U/L

23.93/0.942

F780

31.70/1.248

F780

7119 U/L 7120 U/L

63.340/2.4937 63.363/2.4946

68.250/2.6870 68.275/2.6880

2.426/0.0955 .035/.0014 .109/.0043

3 (Fl)

63.340/2.4937 68.250/2.6870 2.426/0.0955 63.363/2.4946 68.275/2.6880 4 63.340/2.4937 68.250/2.6870 2.426/0.0955 63.363/2.4946 68.275/2.6880 Overflange length remains constant for standard and undersizes.

.035/.0014 .109/.0043 .035/.0014 .109/.0043

F780

Main - 1985-88 engines with 2.6472"/2.6482" shaft. High Strength Aluminum Silicon material. 1,4 67.239/2.6472 72.149/2.8405 2.426/0.0955 .033/.0013 24.80/0.976 F810 67.264/2.6482 72.174/2.8415 .109/.0043

2 3 (Fl)

67.239/2.6472 67.264/2.6482 67.239/2.6472 67.264/2.6482

72.149/2.8405 72.174/2.8415 72.149/2.8405 72.174/2.8415

2.426/0.0955 .033/.0013 .109/.0043 2.426/0.0955 .033/.0013 .109/.0043

18.75/0.738

F810

23.93/0.942

F810

7117 U/L

7237A U/L

67.239/2.6472 72.149/2.8405 67.264/2.6482 72.174/2.8415 to be discontinued when stock exhausted.

2.426/0.0955 .025/.0010 .102/.0040

24.18/0.952

F780

4M1494P Std. 10 20 30 40

4M2037A Std. .25 .50 .75 1.0

7238A U/L 7239A U/L

Main - optional set to 4M2037A with +0.010" overflange length increase for undersizes. *See below for dimensional information. 1,4 67.239/2.6472 72.149/2.8405 2.426/0.0955 .025/.0010 24.80/0.976 F780 4 7237 67.264/2.6482 72.174/2.8415 .102/.0040 U/L 2 67.239/2.6472 72.149/2.8405 2.426/0.0955 .025/.0010 18.75/0.738 F780 2 7238 67.264/2.6482 72.174/2.8415 .102/.0040 U/L 3 (Fl)

4M7122P .25 .50 .75 1.0

7122 U/L

47.440/1.8677 47.490/1.8697

51.029/2.0090 51.079/2.0110

1.760/0.0691

16.00/0.630

F23

CH-18-1A

47.440/1.8677 47.490/1.8697 47.440/1.8677 47.490/1.8697

50.775/1.9990 50.825/2.0010 51.029/2.0090 51.079/2.0110

1.630/0.0640

16.13/0.635

F23

CH-18-2

1.760/0.0691

16.00/0.630

F23

CH-18-4

Cam - optional set to 4C1102S with 0.725" wide #2 and #3 bushes. 47.440/1.8677 51.029/2.0090 1.760/0.0691 1 47.490/1.8697 51.079/2.0110

16.00/0.630

F23

CH-18-1A

2,3

47.440/1.8677 47.490/1.8697

50.775/1.9990 50.825/2.0010

1.630/0.0640

18.42/0.725

F23

CH-18-2A

47.440/1.8677 47.490/1.8697

51.029/2.0090 51.079/2.0110

1.760/0.0691

16.00/0.630

F23

CH-18-4

2,3 4

4C1102S Std.

Std.

ENGINE

VIN CYL

Bore x Stroke

250 (4.1) Aluminum Block 250 (4.1) Aluminum Block 273 (4.5) Aluminum Block 273 (4.5) Aluminum Block 273 (4.5) Aluminum Block 300 (4.9) Aluminum Block

7 8 3 5 8 B

3.47 x 3.31 3.47 x 3.31 3.62 x 3.31 3.62 x 3.31 3.62 x 3.31 3.62 x 3.62

V8 V8 V8 V8 V8 V8

4C1102SW

TORQUE SETTINGS

Connecting Rod 22 ft.lbs/30 Nm Main Bearing 85 ft.lbs/115 Nm

Rod 48.943/1.9269 48.969/1.9279

52.131/2.0524 52.146/2.0530

1.570/0.0620 .020/.0008 .086/.0034

Rod - .002" oversize back version of 8B1351P. 48.943/1.9269 52.182/2.0544 1.725/0.0679 .014/.0006 48.968/1.9279 52.197/2.0550 (@ 0.25 mm u/s) .080/.0031

16.87/0.664

F780

7130 IH 9010 IH

8B1351P Std. .25 .50 .75

8B1351PO/S2 .25 .50 .75

CADILLAC Engine Set No. Sizes Available

Type and Location

Standard Shaft Size

Housing Bore

66.939/2.6354 66.965/2.6364

71.821/2.8276 71.839/2.8283

66.939/2.6354 66.965/2.6364

71.821/2.8276 71.839/2.8283

Max. Bearing Thickness

Vertical Oil Clearance

Max. Overall Length

Material Code

Qty. Set

Bearing Shell No.

2.440/0.0960 .013/.0005 .081/.0032

24.13/0.950

F780

7202 IH

2.440/0.0960 .023/.0009 .091/.0036

24.13/0.950

F780

7203 IH

(Contâ&#x20AC;&#x2122;d.) 5M7146P

Main 1

Std. .25 .50 .75 2,4 3 (Fl)

66.939/2.6354 71.821/2.8276 2.430/0.0955 .041/.0016 32.82/1.292 F780 2 7146 66.965/2.6364 71.839/2.8283 .109/.0043 IH 5 66.939/2.6354 71.821/2.8276 2.440/0.0961 .023/.0009 24.94/0.982 F780 2 7205 66.965/2.6364 71.839/2.8283 .091/.0036 IH Overflange length remains constant for standard and undersizes. Note: If oil clearance on #1 position exceeds .004", install a .026mm/.001" in the #1 journal position.

5C1300S

Cam 1

51.710/2.0358 51.730/2.0366

55.067/2.1680 55.105/2.1695

1.660/0.0652

15.14/0.596

F23

C-4-1

51.200/2.0157 51.220/2.0165

54.560/2.1480 54.597/2.1495

1.660/0.0652

15.14/0.596

F23

C-4-2

50.690/1.9957 50.710/1.9965 50.180/1.9756 50.200/1.9764 49.680/1.9559 49.700/1.9567

54.051/2.1280 54.089/2.1295 53.543/2.1080 53.581/2.1095 53.035/2.0880 53.073/2.0895

1.660/0.0652

15.14/0.596

F23

C-4-3

1.660/0.0652

15.14/0.596

F23

C-4-4

1.660/0.0652

15.14/0.596

F23

C-4-5

Cam - 0.690" wide #5 position cam 51.710/2.0358 55.067/2.1680 1 51.730/2.0366 55.105/2.1695

1.660/0.0652

15.14/0.596

F23

C-4-1

1.660/0.0652

15.14/0.596

F23

C-4-2

1.660/0.0652

15.14/0.596

F23

C-4-3

1.660/0.0652

15.14/0.596

F23

C-4-4

1.660/0.0652

17.53/0.690

F23

C-4-5A

Std.

4 5

5C1300SW Std.

3 4 5

51.200/2.0157 51.220/2.0165 50.690/1.9957 50.710/1.9965 50.180/1.9756 50.200/1.9764 49.680/1.9559 49.700/1.9567

54.560/2.1480 54.597/2.1495 54.051/2.1280 54.089/2.1295 53.543/2.1080 53.581/2.1095 53.035/2.0880 53.073/2.0895

ENGINE

VIN CYL

Bore x Stroke

252 (4.1) Buick Eng. (Even Fire)

3.97 x 3.40

6B1228P Std. 01 10 20 30 40

6B1228PO/S2 10 20 30 40

4M1688P 10 20 30

Rod - .660" wide bearing. 57.117/2.2487 60.295/2.3738 57.137/2.2495 60.312/2.3745

TORQUE SETTINGS Connecting Rod 40 ft.lbs/54 Nm Main Bearing 110 ft.lbs/150 Nm

1.572/0.0619 .014/.0006 .077/.0030

Rod - .002" oversize back version of 6B1228P. 57.117/2.2487 60.346/2.3758 1.724/0.0679 .005/.0002 57.137/2.2495 60.363/2.3765 (@ .010" u/s) .078/.0031

16.76/0.660

F780

2360 IH

16.76/0.660

F780

9071 IH

Main - half groove, standard oil clearance. Optional set to 4M960P with +0.020" overflange length increase.*See below for dimensional information. (Set includes modified upper rear main bearing.) 63.475/2.4990 68.250/2.6870 2.365/0.0931 .020/.0008 22.07/0.869 F780 4 9015 1,3 63.500/2.5000 68.275/2.6880 .096/.0038 U/L 4 63.475/2.4990 68.250/2.6870 2.365/0.0931 .020/.0008 22.07/0.869 F780 1 9016 63.500/2.5000 68.275/2.6880 .096/.0038 L 4 63.475/2.4990 68.250/2.6870 2.365/0.0931 .020/.0008 22.07/0.869 F780 1 9019 63.500/2.5000 68.275/2.6880 .096/.0038 U 2 (Fl)

63.475/2.4990 68.250/2.6870 63.500/2.5000 68.275/2.6880 To be discontinued when stock exhausted.

2.365/0.0931 .020/.0008 .096/.0038

27.38/1.078

F780

* DIMENSIONAL INFORMATION FOR 4M1688P Overall Width (Nominal) Increase in Width .010" u/s shaft 1.078" +0.020" .020" u/s shaft 1.078" +0.020" .030" u/s shaft 1.078" +0.020"

9018 U/L

CADILLAC Type and Location

Standard Shaft Size

Max. Bearing Thickness

Housing Bore

Vertical Oil Clearance

Max. Overall Length

Material Code

Qty. Set

Bearing Shell No.

Engine Set No. Sizes Available

(Contâ&#x20AC;&#x2122;d.) Main - half groove, standard oil clearance. Optional set to 4M960P with +0.040" overflange length increase.*See below for dimensional information. (Set includes modified upper rear main bearing.) 63.475/2.4990 68.250/2.6870 2.365/0.0931 .020/.0008 22.07/0.869 F780 4 9015 1,3 63.500/2.5000 68.275/2.6880 .096/.0038 U/L 4

63.475/2.4990 63.500/2.5000

68.250/2.6870 68.275/2.6880

2.365/0.0931 .020/.0008 .096/.0038

22.07/0.869

F780

9019 U

63.475/2.4990 63.500/2.5000

68.250/2.6870 68.275/2.6880

2.365/0.0931 .020/.0008 .096/.0038

22.07/0.869

F780

9016 L

63.475/2.4990 68.250/2.6870 63.500/2.5000 68.275/2.6880 Stock not available from fee warehouses.

2.365/0.0931 .020/.0008 .096/.0038

27.89/1.098

F780

9024 U/L

2 (Fl)

4M1690P 20 30

* DIMENSIONAL INFORMATION FOR 4M1690P Overall Width (Nominal) Increase in Width .020" u/s shaft 1.098" +0.040" .030" u/s shaft 1.098" +0.040" Main - half groove, standard oil clearance. Optional set to 4M960P with +0.010" overflange length increase.*See below for dimensional information. (Set includes modified upper rear main bearing.) 1,3 63.475/2.4990 68.250/2.6870 2.365/0.0931 .020/.0008 22.07/0.869 F780 4 9015 63.500/2.5000 68.275/2.6880 .096/.0038 U/L 4 63.475/2.4990 68.250/2.6870 2.365/0.0931 .020/.0008 22.07/0.869 F780 1 9016 63.500/2.5000 68.275/2.6880 .096/.0038 L 4 63.475/2.4990 68.250/2.6870 2.365/0.0931 .020/.0008 22.07/0.869 F780 1 9019 63.500/2.5000 68.275/2.6880 .096/.0038 U 2 (Fl) 63.475/2.4990 68.250/2.6870 2.365/0.0931 .020/.0008 27.13/1.068 F780 2 9020 63.500/2.5000 68.275/2.6880 .096/.0038 U/L To be discontinued when stock exhausted.

4M1747P 10 20 40

63.475/2.4990 68.250/2.6870 2.365/0.0931 63.500/2.5000 68.275/2.6880 2 (Fl) 63.475/2.4990 68.250/2.6870 2.365/0.0931 63.500/2.5000 68.275/2.6880 Overflange length remains constant for standard and undersizes.

9015 U/L 9016 L

22.07/0.869

F780

26.87/1.058

F780

Cam - grooved O/D on #1 bush - alt. set to 4C1031S. 45.339/1.7850 48.654/1.9155 1.630/0.0642 1 45.364/1.7860 48.705/1.9175

19.18/0.755

F23

B-11-1B

2,3,4 Cam 1 2,3,4

.020/.0008 .096/.0038 .020/.0008 .096/.0038

4M960P Std. 01 10 20 30 40

9019 U 9017 U/L

4C1031BS Std.

45.339/1.7850 45.364/1.7860

48.654/1.9155 48.705/1.9175

1.630/0.0642

15.88/0.625

F23

B-9-2

45.339/1.7850 45.364/1.7860

48.654/1.9155 48.705/1.9175

1.630/0.0642

19.18/0.755

F23

B-11-1

45.339/1.7850 45.364/1.7860

48.654/1.9155 48.705/1.9175

1.630/0.0642

15.88/0.625

F23

B-9-2

4C1031S Std.

ENGINE

VIN CYL

Bore x Stroke

260 (4.3) Oldsmobile Eng. Diesel

4.057 x 3.585

TORQUE SETTINGS

Connecting Rod 42 ft.lbs/57 Nm Main Bearing 89 ft.lbs/120 Nm

Rod 57.125/2.2490 57.150/2.2500

60.305/2.3742 60.325/2.3750

1.570/0.0618 .013/.0005 .064/.0025

22.23/0.875

F780

CB1366P IH

6B8510P Std. 10 20 30

CADILLAC Engine Set No. Sizes Available

Type and Location

Standard Shaft Size

Housing Bore

76.182/2.9993 76.208/3.0003

80.975/3.1880 81.001/3.1890

76.182/2.9993 76.208/3.0003

80.975/3.1880 81.001/3.1890

Max. Bearing Thickness

Max. Overall Length

Material Code

Qty. Set

Bearing Shell No.

2.380/0.0936 .020/.0008 .097/.0038

24.89/0.980

F780

MB2362P U/L

2.380/0.0936 .020/.0008 .097/.0038

24.87/0.979

F780

MB2163P IH

30.35/1.195

F780

32.26/1.270

F780

MB2363P IH MB2964P U/L

(Contâ&#x20AC;&#x2122;d.) 4M1616P

Main 1

Std. 10 2 3 (Fl)

76.182/2.9993 80.975/3.1880 2.380/0.0936 76.208/3.0003 81.001/3.1890 4 76.182/2.9993 80.975/3.1880 2.370/0.0932 76.208/3.0003 81.001/3.1890 Overflange length remains constant for standard and undersizes.

4C1247S

Cam 1

Std. 2 3 4

Vertical Oil Clearance

.020/.0008 .097/.0038 .046/.0018 .086/.0034

51.707/2.0357 51.727/2.0365

55.062/2.1678 55.113/2.1698

1.640/0.0646

17.60/0.693

F23

O-7-1

51.199/2.0157 51.219/2.0165 50.691/1.9957 50.711/1.9965 50.183/1.9757 50.203/1.9765

54.554/2.1478 54.605/2.1498 54.046/2.1278 54.097/2.1298 53.538/2.1078 53.589/2.1098

1.640/0.0646

17.60/0.693

F23

O-6-2

1.640/0.0646

17.60/0.693

F23

O-6-3

1.640/0.0646

17.60/0.693

F23

O-6-4

ENGINE

VIN CYL

Bore x Stroke

305 (5.0) Chevrolet Eng.

3.74 x 3.48

TORQUE SETTINGS Connecting Rod 35 ft.lbs/48 Nm (11/32" bolts only) Connecting Rod 45 ft.lbs/61 Nm (3/8" bolts only) Main Bearing 75 ft.lbs/102 Nm

Rod

8B663A

53.315/2.0990 53.340/2.1000

Std. 01 10 20 30 40

8B663AO/S2 10 20 30 40

56.507/2.2247 56.520/2.2252

1.575/0.0620 .017/.0007 .081/.0032

Rod - .002" oversize OD version of 8B663A. 53.315/2.0990 56.558/2.2267 1.727/0.0680 .018/.0007 53.340/2.1000 56.571/2.2272 (@ .010" u/s) .082/.0032

21.25/0.837

F810

2376A

21.25/0.837

F810

9026A IH

21.25/0.837

F780

2376 IH

21.25/0.837

F780

9026 IH

Rod

8B663P

53.315/2.0990 53.340/2.1000

Std. 01 10 20 30 40 50 60

8B663PO/S2 10 20 30 40

56.507/2.2247 56.520/2.2252

1.575/0.0620 .017/.0007 .081/.0032

Rod - .002" oversize OD version of 8B663P. 53.315/2.0990 56.558/2.2267 1.727/0.0680 .018/.0007 53.340/2.1000 56.571/2.2272 (@ .010" u/s) .082/.0032

62.174/2.4478 62.200/2.4488

.010" u/s shaft .020" u/s shaft .030" u/s shaft .040" u/s shaft .050" u/s shaft .060" u/s shaft

67.071/2.6406 67.094/2.6415

2.426/0.0955 .020/.0008 .091/.0036

44.15/1.738

F780

* DIMENSIONAL INFORMATION FOR 5M1626P Overall Width (Nominal) Increase in Width 1.738" +0.020" 1.738" +0.020" 1.738" +0.020" 1.738" +0.020" 1.738" +0.020" 1.738" +0.020"

2379 U/L

CADILLAC Type and Location

Standard Shaft Size

Housing Bore

Max. Bearing Thickness

Vertical Oil Clearance

Max. Overall Length

Material Code

Qty. Set

Bearing Shell No.

Engine Set No. Sizes Available

(Contâ&#x20AC;&#x2122;d.) Main - Alt set to 5M909P with +0.040" overflange length increase for undersizes. *See below for dimensional information. 62.189/2.4484 67.071/2.6406 2.426/0.0955 .008/.0003 20.50/0.807 F780 8 2377 1,2,3,4 62.212/2.4493 67.094/2.6415 .079/.0031 U/L 5 (Fl)

62.174/2.4478 62.200/2.4488

67.071/2.6406 67.094/2.6415

2.426/0.0955 .020/.0008 .091/.0036

1.76/0.069

F780

5M1683P 20 30 40

2355 U/L

* DIMENSIONAL INFORMATION FOR 5M1683P Overall Width (Nominal) Increase in Width .020" u/s shaft 1.758" +0.040" .030" u/s shaft 1.758" +0.040" .040" u/s shaft 1.758" +0.040" Main - Alt set to 5M909P with +0.010" overflange length increase for undersizes. *See below for dimensional information. 1,2,3,4 62.189/2.4484 67.071/2.6406 2.426/0.0955 .008/.0003 20.50/0.807 F780 8 2377 62.212/2.4493 67.094/2.6415 .079/.0031 U/L 5 (Fl) 62.174/2.4478 67.071/2.6406 2.426/0.0955 .020/.0008 43.89/1.728 F780 2 2365 62.200/2.4488 67.094/2.6415 .091/.0036 U/L

.010" u/s shaft .020" u/s shaft .030" u/s shaft .040" u/s shaft .050" u/s shaft .060" u/s shaft Main 1,2,3,4 5 (Fl)

62.189/2.4484 62.212/2.4493 62.174/2.4478 62.200/2.4488

67.071/2.6406 67.094/2.6415 67.071/2.6406 67.094/2.6415

* DIMENSIONAL INFORMATION FOR 5M1744P Overall Width (Nominal) Increase in Width 1.728" +0.010" 1.728" +0.010" 1.728" +0.010" 1.728" +0.010" 1.728" +0.010" 1.728" +0.010"

2.426/0.0955 .008/.0003 .079/.0031 2.426/0.0955 .020/.0008 .091/.0036

20.50/0.807

F810

2377A U/L 2378A U/L

43.64/1.718

F810

Main - half groove. Standard oil clearance. 1,2,3,4 62.189/2.4484 67.071/2.6406 2.426/0.0955 .008/.0003 62.212/2.4493 67.094/2.6415 .079/.0031

20.50/0.807

F780

5 (Fl)

43.64/1.718

F780

2378 U/L

Cam - Single piece from 5C3349C set (#1 cam). 47.452/1.8682 51.283/2.0190 1.895/0.0746 .025/.0010 47.478/1.8692 51.333/2.0210 .127/.0050

19.05/0.750

F830

3349

62.174/2.4478 67.071/2.6406 2.426/0.0955 .020/.0008 62.200/2.4488 67.094/2.6415 .091/.0036 Overflange length remains constant for standard and undersizes.

2377 U/L

19536

19537

Cam - standard housing bores. 47.452/1.8682 51.283/2.0190 1 47.478/1.8692 51.333/2.0210

1.890/0.0744

18.92/0.745

F23

CH-4-1

2,5

1.760/0.0694

18.92/0.745

F23

CH-4-2

1.640/0.0646

18.92/0.745

F23

CH-4-3

Cam - standard housing bores (High Performance). 1 47.452/1.8682 51.283/2.0190 1.895/0.0746 .025/.0010 47.478/1.8692 51.333/2.0210 .127/.0050

19.05/0.750

F830

3349

2,5

19.05/0.750

F830

3347

19.05/0.750

F830

3346

3,4

47.452/1.8682 47.478/1.8692 47.452/1.8682 47.478/1.8692

51.029/2.0090 51.079/2.0110 50.775/1.9990 50.825/2.0010

5M909A Std. 01 10 20 30 40

5M909P Std. 01 10 20 30 40 50 60

1C3349C Std.

Cam - +0.010" O.D. all housing bores 2.0290"/2.0310" (High Performance). Customer to drill oil holes. 47.452/1.8682 51.537/2.0290 2.022/0.0796 .025/.0010 19.05/0.750 F830 5 1-5 47.478/1.8692 51.587/2.0310 .127/.0050

47.452/1.8682 47.478/1.8692 47.452/1.8682 47.478/1.8692

5M1744P 10 20 30 40 50 60

5C004AS Std.

5C004BS Std.

5C290S Std.

1.768/0.0696 .025/.0010 .127/.0050 1.641/0.0646 .025/.0010 .127/.0050

5C3349C Std.

CADILLAC Engine Set No. Sizes Available

Type and Location

Standard Shaft Size

Housing Bore

Max. Bearing Thickness

Vertical Oil Clearance

ENGINE

VIN CYL

Bore x Stroke

307 (5.0) Oldsmobile Eng. 307 (5.0) Oldsmobile Eng.

9 Y

3.80 x 3.39 3.80 x 3.39

V8 V8

Max. Overall Length

Material Code

Qty. Set

Bearing Shell No.

TORQUE SETTINGS Connecting Rod 42 ft.lbs/57 Nm Main Bearing 120 ft.lbs/163 Nm (rear bearing cap) Main Bearing 80 ft.lbs/108 Nm (except rear bearing cap)

Rod

8B684P

53.945/2.1238 53.970/2.1248

Std. 10 20 30 40

8B684PO/S2 10 20 30 40

5M805P

57.137/2.2495 57.150/2.2500

1.572/0.0619 .023/.0009 .087/.0034

Rod - .002" oversize OD version of 8B684P. 53.945/2.1238 57.188/2.2515 1.724/0.0679 .024/.0009 53.970/2.1248 57.201/2.2520 (@ .010" u/s) .088/.0035 Main 1(L)

Std. 10 20 30 40

63.462/2.4985 63.487/2.4995

68.250/2.6870 68.275/2.6880

2.377/0.0936 .009/.0004 .084/.0033

1(U),2,4

63.462/2.4985 68.250/2.6870 2.377/0.0936 63.487/2.4995 68.275/2.6880 3 (Fl) 63.457/2.4983 68.250/2.6870 2.377/0.0936 63.482/2.4993 68.275/2.6880 5 63.462/2.4985 68.250/2.6870 2.377/0.0936 63.487/2.4995 68.275/2.6880 Overflange length remains constant for standard and undersizes.

5M8603P 10 20 30 40

63.462/2.4985 68.250/2.6870 63.487/2.4995 68.275/2.6880 3 (Fl) 63.457/2.4983 68.250/2.6870 63.482/2.4993 68.275/2.6880 5 63.462/2.4985 68.250/2.6870 63.487/2.4995 68.275/2.6880 Stock not available from fee warehouses.

.010" u/s shaft .020" u/s shaft .030" u/s shaft .040" u/s shaft Cam 1

55.067/2.1680 55.105/2.1695 54.560/2.1480 54.597/2.1495 54.051/2.1280 54.090/2.1295

50.183/1.9757 50.203/1.9765

49.675/1.9557 49.695/1.9565

2 3

Semi

8500 IH

21.11/0.831

F780

9041 IH

24.76/0.975

F780

8502 L

24.76/0.975

F780

30.35/1.195

F780

41.37/1.629

F780

8505 IH 8503 IH 8504 U/L

2.377/0.0936 .009/.0004 .084/.0033 2.377/0.0936 .009/.0004 .084/.0033 2.377/0.0936 .009/.0004 .084/.0033

24.76/0.975

F780

30.61/1.205

F780

41.37/1.629

F780

8505 IH 8603 IH 8504 U/L

* DIMENSIONAL INFORMATION FOR 5M8603P Overall Width (Nominal) Increase in Width 1.205" +0.010" 1.205" +0.010" 1.205" +0.010" 1.205" +0.010"

51.707/2.0357 51.727/2.0365 51.199/2.0157 51.219/2.0165 50.691/1.9957 50.711/1.9965

Std.

RB3049YA20

F780

Main - optional set to 5M805P with +.010" overflange length increase for undersizes. * See below for dimensional information. 63.462/2.4985 68.250/2.6870 2.377/0.0936 .009/.0004 24.76/0.975 F780 1 8502 1 63.487/2.4995 68.275/2.6880 .084/.0033 L 1(U),2,4

5C1088S

.009/.0004 .084/.0033 .009/.0004 .084/.0033 .009/.0004 .084/.0033

21.11/0.831

1.640/0.0646

17.60/0.693

F23

O-7-1

1.640/0.0646

17.60/0.693

F23

O-6-2

1.640/0.0646

17.60/0.693

F23

O-6-3

53.543/2.1080 53.581/2.1095

1.640/0.0646

17.60/0.693

F23

O-6-4

53.035/2.0880 53.073/2.0895

1.640/0.0646

17.60/0.693

F23

O-6-5

23.37/0.920

F100

3049YA20

Small End 24.933/0.9816 27.534/1.0840 (Nominal) (Finish ID Bore Size)

CADILLAC Type and Location

Standard Shaft Size

Max. Bearing Thickness

Housing Bore

Vertical Oil Clearance

ENGINE

VIN CYL

Bore x Stroke

325 (5.3) Vortec 5300 346 (5.7) 364 (6.0) Vortec 6000 364 (6.0) Vortec 6000

T S N U

3.780 x 3.622 3.898 x 3.622 4.000 x 3.622 4.000 x 3.622

V8 V8 V8 V8

Max. Overall Length

Material Code

Qty. Set

Bearing Shell No.

Engine Set No. Sizes Available

TORQUE SETTINGS

Connecting Rod 15 ft.lbs/20 Nm + 60 deg. Main Bearing Consult service manual

Rod - High Strength Aluminum Silicon material. 53.315/2.0990 56.507/2.2247 1.575/0.0620 .017/.0007 53.340/2.1000 56.520/2.2252 .081/.0032

21.25/0.837

Rod - .002" oversize OD version of 8B663A. 53.315/2.0990 56.558/2.2267 1.727/0.0680 .018/.0007 53.340/2.1000 56.571/2.2272 (@ .010" u/s) .082/.0032

21.25/0.837

F810

2376A

8B663A Std. 01 10 20 30 40

F810

9026A IH

8B663AO/S2 10 20 30 40

Rod 53.315/2.0990 53.340/2.1000

56.507/2.2247 56.520/2.2252

1.575/0.0620 .017/.0007 .081/.0032

21.25/0.837

F780

2376 IH

Rod - .002" oversize OD version of 8B663P. 53.315/2.0990 56.558/2.2267 1.727/0.0680 .018/.0007 53.340/2.1000 56.571/2.2272 (@ .010" u/s) .082/.0032

21.25/0.837

Main - High Strength Aluminum Silicon material. 64.993/2.5588 69.873/2.7509 2.430/0.0957 .006/.0002 1,2,4,5 65.007/2.5593 69.887/2.7515 .046/.0018

20.45/0.805

3 (Fl)

26.10/1.028

F810

7299A U/L

Cam - 1st Series design with #1 & 5 housing bore size of 2.3260"/2.3280". 54.991/2.1650 59.080/2.3260 2.007/0.0790 16.00/0.630 1,5 55.042/2.1670 59.131/2.3280

F23

CH-10-1

2,4

54.991/2.1650 55.042/2.1670

58.829/2.3161 58.879/2.3181

1.880/0.0740

16.00/0.630

F23

CH-10-2

54.991/2.1650 55.042/2.1670

58.580/2.3063 58.631/2.3083

1.758/0.0692

16.00/0.630

F23

CH-10-3

Cam - 2nd Series design with #1 & 5 housing bore size of 2.3460"/2.3480". 54.991/2.1650 59.588/2.3460 2.260/0.0890 16.00/0.630 1,5 55.042/2.1670 59.639/2.3480

F23

CH-23-1

2,4

54.991/2.1650 54.042/2.1276

59.080/2.3260 59.131/2.3280

2.007/0.0790

16.00/0.630

F23

CH-10-1

54.991/2.1650 55.042/2.1670

58.580/2.3063 58.631/2.3083

1.758/0.0692

16.00/0.630

F23

CH-10-3

64.993/2.5588 65.007/2.5593

69.873/2.7509 69.887/2.7515

2.430/0.0957 .002/.0001 .046/.0018

ENGINE

VIN CYL

Bore x Stroke

350 (5.7) Oldsmobile Eng. Diesel

4.06 x 3.39

F780

F810

9026 IH 7298A U/L

8B663P Std. 01 10 20 30 40 50 60

8B663PO/S2 10 20 30 40

5M7298A Std. 10 20 30 40

5C1000S Std.

5C1001S Std.

TORQUE SETTINGS

Connecting Rod 42 ft.lbs/57 Nm Main Bearing 120 ft.lbs/163 Nm

Rod 53.945/2.1238 53.970/2.1248

57.137/2.2495 57.150/2.2500

1.572/0.0619 .023/.0009 .087/.0034

Rod - .002" oversize OD version of 8B684P. 53.945/2.1238 57.188/2.2515 1.724/0.0679 .024/.0009 53.970/2.1248 57.201/2.2520 (@ .010" u/s) .088/.0035 Main 1 1

76.182/2.9993 76.208/3.0003

80.975/3.1880 81.001/3.1890

2.377/0.0936 .013/.0005 .091/.0036

76.182/2.9993 80.975/3.1880 2.377/0.0936 76.208/3.0003 81.001/3.1890 2,4 76.182/2.9993 80.975/3.1880 2.377/0.0936 76.208/3.0003 81.001/3.1890 3 (Fl) 76.182/2.9993 80.975/3.1880 2.377/0.0936 76.208/3.0003 81.001/3.1890 5 76.175/2.9990 80.975/3.1880 2.377/0.0936 76.200/3.0000 81.001/3.1890 Overflange length remains constant for standard and undersizes.

.013/.0005 .091/.0036 .013/.0005 .091/.0036 .013/.0005 .091/.0036 .013/.0005 .091/.0036

21.11/0.831

24.87/0.979

F780

24.87/0.979

F780

24.87/0.979

F780

30.38/1.196

F780

41.28/1.625

F780

8500 IH 9041 IH 8507 L 8512 U 8512 IH 8508 IH 8509 U/L

8B684P Std. 10 20 30 40

8B684PO/S2 10 20 30 40

5M804P Std. 10 20 30 40

CADILLAC Engine Set No. Sizes Available

Type and Location

Standard Shaft Size

Housing Bore

Max. Bearing Thickness

Vertical Oil Clearance

Max. Overall Length

Material Code

Qty. Set

Bearing Shell No.

(Contâ&#x20AC;&#x2122;d.) 5M8519P 20 30 40

Main - optional set to 5M804P with +0.010" overflange length increase. *See dimensional information below. 76.182/2.9993 80.975/3.1880 2.377/0.0936 .013/.0005 24.87/0.979 F780 1 8507 1 76.208/3.0003 81.001/3.1890 .091/.0036 L 1

76.182/2.9993 76.208/3.0003

80.975/3.1880 81.001/3.1890

2.377/0.0936 .013/.0005 .091/.0036

24.87/0.979

F780

8512 U

76.182/2.9993 80.975/3.1880 76.208/3.0003 81.001/3.1890 3 (Fl) 76.182/2.9993 80.975/3.1880 76.208/3.0003 81.001/3.1890 5 76.175/2.9990 80.975/3.1880 76.200/3.0000 81.001/3.1890 Stock not available from fee warehouses.

2.377/0.0936 .013/.0005 .091/.0036 2.377/0.0936 .013/.0005 .091/.0036 2.377/0.0936 .013/.0005 .091/.0036

24.87/0.979

F780

30.63/1.206

F780

41.28/1.625

F780

8512 IH 8519 IH 8509 U/L

2,4

* DIMENSIONAL INFORMATION FOR 5M8519P Overall Width (Nominal) Increase in Width .020" u/s shaft 1.206" +0.010" .030" u/s shaft 1.206" +0.010" .040" u/s shaft 1.206" +0.010"

5C1088S

Cam 1

51.707/2.0357 51.727/2.0365

55.067/2.1680 55.105/2.1695

1.640/0.0646

17.60/0.693

F23

O-7-1

51.199/2.0157 51.219/2.0165

54.560/2.1480 54.597/2.1495

1.640/0.0646

17.60/0.693

F23

O-6-2

50.691/1.9957 50.711/1.9965

54.051/2.1280 54.090/2.1295

1.640/0.0646

17.60/0.693

F23

O-6-3

50.183/1.9757 50.203/1.9765 49.675/1.9557 49.695/1.9565

53.543/2.1080 53.581/2.1095 53.035/2.0880 53.073/2.0895

1.640/0.0646

17.60/0.693

F23

O-6-4

1.640/0.0646

17.60/0.693

F23

O-6-5

Std.

ENGINE

VIN CYL

Bore x Stroke

350 (5.7) Oldsmobile Eng. 350 (5.7) Oldsmobile Eng. 350 (5.7) Oldsmobile Eng.

8 B R

4.06 x 3.39 4.06 x 3.39 4.06 x 3.39

V8 V8 V8

TORQUE SETTINGS Connecting Rod 42 ft.lbs/57 Nm Main Bearing 120 ft.lbs/163 Nm (rear bearing cap only) Main Bearing 80 ft.lbs/108 Nm (except rear bearing cap)

Rod

8B684P

53.945/2.1238 53.970/2.1248

Std. 10 20 30 40

8B684PO/S2 10 20 30 40

5M805P

57.137/2.2495 57.150/2.2500

1.572/0.0619 .023/.0009 .087/.0034

Rod - .002" oversize OD version of 8B684P. 53.945/2.1238 57.188/2.2515 1.724/0.0679 .024/.0009 53.970/2.1248 57.201/2.2520 (@ .010" u/s) .088/.0035 Main 1(L)

21.11/0.831

F780

8500 IH

21.11/0.831

F780

9041 IH 8502 L 8505 IH

63.462/2.4985 63.487/2.4995 63.462/2.4985 63.487/2.4995

68.250/2.6870 68.275/2.6880 68.250/2.6870 68.275/2.6880

2.377/0.0936 .009/.0004 .084/.0033 2.377/0.0936 .009/.0004 .084/.0033

24.76/0.975

F780

24.76/0.975

F780

63.457/2.4983 63.482/2.4993

68.250/2.6870 68.275/2.6880

2.377/0.0936 .009/.0004 .084/.0033

30.35/1.195

F780

8503 IH

63.462/2.4985 68.250/2.6870 2.377/0.0936 .009/.0004 63.487/2.4995 68.275/2.6880 .084/.0033 Overflange length remains constant for standard and undersizes.

41.37/1.629

F780

8504 U/L

Std. 10 20 30 40 1(U),2,4 3 (Fl) 5

CADILLAC Type and Location

Standard Shaft Size

Max. Bearing Thickness

Housing Bore

Vertical Oil Clearance

Max. Overall Length

Material Code

Qty. Set

Bearing Shell No.

Engine Set No. Sizes Available

(Contâ&#x20AC;&#x2122;d.) Main - optional set to 5M805P with +0.010" overflange length increase. * See below for dimensional information. 63.462/2.4985 68.250/2.6870 2.377/0.0936 .009/.0004 24.76/0.975 F780 1 8502 1 63.487/2.4995 68.275/2.6880 .084/.0033 L 1(U),2,4

63.462/2.4985 63.487/2.4995

68.250/2.6870 68.275/2.6880

2.377/0.0936 .009/.0004 .084/.0033

24.76/0.975

F780

8505 IH

63.457/2.4983 68.250/2.6870 63.482/2.4993 68.275/2.6880 5 63.462/2.4985 68.250/2.6870 63.487/2.4995 68.275/2.6880 Stock not available from fee warehouses.

2.377/0.0936 .009/.0004 .084/.0033 2.377/0.0936 .009/.0004 .084/.0033

30.61/1.205

F780

41.37/1.629

F780

8603 IH 8504 U/L

3 (Fl)

.010" u/s shaft .020" u/s shaft .030" u/s shaft .040" u/s shaft Cam - 1977-80 engines only. 1 51.707/2.0357 55.067/2.1680 51.727/2.0365 55.105/2.1695 2 51.199/2.0157 54.560/2.1480 51.219/2.0165 54.597/2.1495 3 50.691/1.9957 54.051/2.1280 50.711/1.9965 54.090/2.1295 4 50.183/1.9757 53.543/2.1080 50.203/1.9765 53.581/2.1095

17.60/0.693

F23

O-7-1

1.640/0.0646

17.60/0.693

F23

O-6-2

1.640/0.0646

17.60/0.693

F23

O-6-3

1.640/0.0646

17.60/0.693

F23

O-6-4

1.640/0.0646

17.60/0.693

F23

O-6-5

Cam - 1976 engines only. 51.707/2.0357 55.067/2.1680 1 51.727/2.0365 55.105/2.1695

1.640/0.0646

17.60/0.693

F23

O-6-1

49.675/1.9557 49.695/1.9565

53.035/2.0880 53.073/2.0895

5C1088S Std.

5C638S Std.

51.199/2.0157 51.219/2.0165 50.691/1.9957 50.711/1.9965

54.560/2.1480 54.597/2.1495 54.051/2.1280 54.090/2.1295

1.640/0.0646

17.60/0.693

F23

O-6-2

1.640/0.0646

17.60/0.693

F23

O-6-3

50.183/1.9757 50.203/1.9765

53.543/2.1080 53.581/2.1095

1.640/0.0646

17.60/0.693

F23

O-6-4

49.675/1.9557 49.695/1.9565

53.035/2.0880 53.073/2.0895

1.640/0.0646

17.60/0.693

F23

O-6-5

5M8603P 10 20 30 40

* DIMENSIONAL INFORMATION FOR 5M8603P Overall Width (Nominal) Increase in Width 1.205" +0.010" 1.205" +0.010" 1.205" +0.010" 1.205" +0.010"

1.640/0.0646

ENGINE

VIN CYL

Bore x Stroke

350 (5.7) Chevrolet Eng. 350 (5.7) Chevrolet Eng. 350 (5.7) Chevrolet Eng.

7 P R

4.00 x 3.48 4.00 x 3.48 4.00 x 3.48

V8 V8 V8

TORQUE SETTINGS

Connecting Rod 35 ft.lbs/48 Nm (11/32" bolts only) Connecting Rod 45 ft.lbs/61 Nm (3/8" bolts only) Main Bearing 75 ft.lbs/102 Nm

Rod 53.315/2.0990 53.340/2.1000

56.507/2.2247 56.520/2.2252

1.575/0.0620 .017/.0007 .081/.0032

Rod - .002" oversize OD version of 8B663A. 53.315/2.0990 56.558/2.2267 1.727/0.0680 .018/.0007 53.340/2.1000 56.571/2.2272 (@ .010" u/s) .082/.0032

21.25/0.837

F810

2376A

8B663A Std. 01 10 20 30 40

21.25/0.837

F810

9026A IH

8B663AO/S2 10 20 30 40

Rod 53.315/2.0990 53.340/2.1000

56.507/2.2247 56.520/2.2252

1.575/0.0620 .017/.0007 .081/.0032

21.25/0.837

F780

2376 IH

8B663P Std. 01 10 20 30 40 50 60

CADILLAC Engine Set No. Sizes Available

Type and Location

Standard Shaft Size

Housing Bore

Max. Bearing Thickness

Vertical Oil Clearance

Max. Overall Length

Material Code

Qty. Set

Bearing Shell No.

11 (Contâ&#x20AC;&#x2122;d.) Main - Alt set to 5M909P with +0.020" overflange length increase for undersizes. *See below for dimensional information. 5M1626P 1,2,3,4 62.189/2.4484 67.071/2.6406 2.426/0.0955 .008/.0003 20.50/0.807 F780 8 2377 10 20 30 40 50 60 62.212/2.4493 67.094/2.6415 .079/.0031 U/L 5 (Fl) 62.174/2.4478 67.071/2.6406 2.426/0.0955 .020/.0008 44.15/1.738 F780 2 2379 62.200/2.4488 67.094/2.6415 .091/.0036 U/L Stock not available from fee warehouses.

.010" u/s shaft .020" u/s shaft .030" u/s shaft .040" u/s shaft .050" u/s shaft .060" u/s shaft

5M1683P 20 30 40

* DIMENSIONAL INFORMATION FOR 5M1626P Overall Width (Nominal) Increase in Width 1.738" +0.020" 1.738" +0.020" 1.738" +0.020" 1.738" +0.020" 1.738" +0.020" 1.738" +0.020"

62.174/2.4478 67.071/2.6406 62.200/2.4488 67.094/2.6415 Stock not available from fee warehouses.

2.426/0.0955 .020/.0008 .091/.0036

1.76/0.069

F780

2355 U/L

* DIMENSIONAL INFORMATION FOR 5M1683P Overall Width (Nominal) Increase in Width .020" u/s shaft 1.758" +0.040" .030" u/s shaft 1.758" +0.040" .040" u/s shaft 1.758" +0.040" Main - Alt set to 5M909P with +0.010" overflange length increase for undersizes. *See below for dimensional information. 5M1744P 1,2,3,4 62.189/2.4484 67.071/2.6406 2.426/0.0955 .008/.0003 20.50/0.807 F780 8 2377 62.212/2.4493 67.094/2.6415 .079/.0031 U/L 10 20 30 40 50 60 5 (Fl) 62.174/2.4478 67.071/2.6406 2.426/0.0955 .020/.0008 43.89/1.728 F780 2 2365 62.200/2.4488 67.094/2.6415 .091/.0036 U/L Stock not available from fee warehouses.

.010" u/s shaft .020" u/s shaft .030" u/s shaft .040" u/s shaft .050" u/s shaft .060" u/s shaft

5M909A

Main 1,2,3,4

Std. 01 10 20 30 40 5 (Fl)

62.189/2.4484 62.212/2.4493 62.174/2.4478 62.200/2.4488

* DIMENSIONAL INFORMATION FOR 5M1744P Overall Width (Nominal) Increase in Width 1.728" +0.010" 1.728" +0.010" 1.728" +0.010" 1.728" +0.010" 1.728" +0.010" 1.728" +0.010"

67.071/2.6406 67.094/2.6415 67.071/2.6406 67.094/2.6415

2.426/0.0955 .008/.0003 .079/.0031 2.426/0.0955 .020/.0008 .091/.0036

Main - half groove. Standard oil clearance. 1,2,3,4 62.189/2.4484 67.071/2.6406 2.426/0.0955 .008/.0003 Std. 01 10 20 30 40 50 60 62.212/2.4493 67.094/2.6415 .079/.0031

5M909P

5 (Fl)

62.174/2.4478 67.071/2.6406 2.426/0.0955 .020/.0008 62.200/2.4488 67.094/2.6415 .091/.0036 Overflange length remains constant for standard and undersizes.

1C3349C Std.

5C004AS Std.

Cam - Single piece from 5C3349C set (#1 cam). 47.452/1.8682 51.283/2.0190 1.895/0.0746 .025/.0010 47.478/1.8692 51.333/2.0210 .127/.0050

20.50/0.807

F810

43.64/1.718

F810

20.50/0.807

F780

2377 U/L

43.64/1.718

F780

2378 U/L

19.05/0.750

F830

3349

2377A U/L 2378A U/L

19536

CADILLAC Type and Location

Standard Shaft Size

Max. Bearing Thickness

Housing Bore

Vertical Oil Clearance

Max. Overall Length

Material Code

Qty. Set

Bearing Shell No.

Engine Set No. Sizes Available

(Contâ&#x20AC;&#x2122;d.) Cam - +0.020" O.D. all housing bores 2.0390"/2.0410" (High Performance). Customer to drill oil holes. 47.452/1.8682 51.791/2.0390 2.149/0.0846 .025/.0010 19.05/0.750 F830 5 1-5 47.478/1.8692 51.841/2.0410 .127/.0050 Cam - standard housing bores. 1 47.452/1.8682 51.283/2.0190 47.478/1.8692 51.333/2.0210 2,5 47.452/1.8682 51.029/2.0090 47.478/1.8692 51.079/2.0110 3,4 47.452/1.8682 50.775/1.9990 47.478/1.8692 50.825/2.0010

18.92/0.745

F23

CH-4-1

1.760/0.0694

18.92/0.745

F23

CH-4-2

1.640/0.0646

18.92/0.745

F23

CH-4-3

19.05/0.750

F830

3349

19.05/0.750

F830

3347

19.05/0.750

F830

3346

5C290S Std.

.025/.0010 .127/.0050 .025/.0010 .127/.0050 .025/.0010 .127/.0050

ENGINE

VIN CYL

Bore x Stroke

368 (6.0) 368 (6.0) 425 (7.0) 425 (7.0) 472 (7.7) 472 (7.7) 500 (8.2) 500 (8.2)

6 9 S T

3.80 x 4.06 3.80 x 4.06 4.08 x 4.06 4.08 x 4.06 4.30 x 4.06 4.30 x 4.06 4.30 x 4.30 4.30 x 4.30

5C004BS Std.

1.890/0.0744

Cam - standard housing bores (High Performance). 47.452/1.8682 51.283/2.0190 1.895/0.0746 1 47.478/1.8692 51.333/2.0210 2,5 47.452/1.8682 51.029/2.0090 1.768/0.0696 47.478/1.8692 51.079/2.0110 3,4 47.452/1.8682 50.775/1.9990 1.641/0.0646 47.478/1.8692 50.825/2.0010

19537

V8 V8 V8 V8 V8 V8 V8 V8

5C3349C Std.

TORQUE SETTINGS

Connecting Rod 40 ft.lbs/54 Nm Main Bearing 90 ft.lbs/122 Nm

Rod 63.480/2.4992 63.505/2.5002

66.662/2.6245 66.675/2.6250

1.572/0.0619 .013/.0005 .076/.0030

Main 1

82.525/3.2490 87.333/3.4383 2.388/0.0940 82.550/3.2500 87.351/3.4390 2,4 82.525/3.2490 87.333/3.4383 2.388/0.0940 82.550/3.2500 87.351/3.4390 3 (Fl) 82.525/3.2490 87.333/3.4383 2.388/0.0940 82.550/3.2500 87.351/3.4390 5 82.525/3.2490 87.333/3.4383 2.388/0.0940 82.550/3.2500 87.351/3.4390 Overflange length remains constant for standard and undersizes. Cam 1-5

44.450/1.7500 44.468/1.7507

47.732/1.8792 47.757/1.8802

.015/.0006 .084/.0033 .015/.0006 .084/.0033 .015/.0006 .084/.0033 .015/.0006 .084/.0033

1.620/0.0638

20.98/0.826

30.35/1.195

F780

8506 IH

27.10/1.067

F780

31.98/1.259

F780

MB2535AL U/L MB2536AL U/L MB2537AL

30.35/1.195

F780

MB2538AL

15.88/0.625

F23

C-3-1

8B542P Std. 10 20 30 40 50

5M970AL Std. 10 20

5C530S Std.

CHEVROLET CHEVROLET ENGINE INDEX Engine Disp. 61 993cc (1.0)....... 61 993cc (1.0)....... 61 993cc (1.0)....... 61 993cc (1.0)....... 79 1295cc (1.3)..... 79 1295cc (1.3)..... 85 1393cc (1.4)..... 92 1471cc (1.5)..... 92 1471cc (1.5)..... 92 1471cc (1.5)..... 98 1588cc (1.6)..... 98 1588cc (1.6)..... 98 1588cc (1.6)..... 98 (1.6) ................. 98 (1.6) ................. 98 (1.6) ................. 98 (1.6) ................. 98 (1.6) ................. 110 (1.8) ............... 110 1819cc (1.8)... 111 (1.8) ............... 112 (1.8) ............... 119 (1.9) ............... 122 (2.0) ............... 122 (2.0) ............... 122 (2.0) ............... 122 (2.0) ............... 122 (2.0) ............... 122 (2.0) ............... 122 (2.0) ............... 133 2180cc (2.2)... 134 (2.2) ............... 134 (2.2) ............... 134 (2.2) ............... 134 (2.2) ............... 134 (2.2) ............... 134 2198cc (2.2)... 138 (2.3) ............... 140 (2.3) ............... 140 (2.3) ............... 140 (2.3) ............... 146 (2.4) ............... 151 2474cc (2.5)... 151 2474cc (2.5)... 151 2474cc (2.5)... 151 2474cc (2.5)... 151 2474cc (2.5)... 151 2474cc (2.5)... 151 2474cc (2.5)... 151 2474cc (2.5)... 151 2474cc (2.5)... 153 (2.5) ............... 153 (2.5) ............... 153 (2.5) ............... 153 (2.5) ............... 169 2770cc (2.8)... 169 2770cc (2.8)... 173 (2.8) ............... 173 (2.8) ............... 173 (2.8) ............... 173 (2.8) ............... 173 (2.8) ............... 173 (2.8) ............... 173 (2.8) ............... 173 (2.8) ............... 189 (3.1) ............... 189 (3.1) ............... 189 (3.1) ............... 189 (3.1) ............... 194 (3.2) ............... 196 (3.2) ............... 200 (3.3) ............... 207 (3.4) ............... 207 (3.4) ............... 207 (3.4) ............... 211 3460cc (3.5)... 211 3460cc (3.5)... 216 (3.5) ............... 229 (3.8) ...............

Notation

VIN

Cyl.

Suzuki G10T, Turbo Suzuki G10 Suzuki G10 Suzuki G10 Suzuki G13BA Suzuki G13BA Chevette Isuzu 4XC1 Isuzu 4XC1T, Turbo Isuzu 4XC1 Toyota 4ALC Toyota 4AGE Suzuki G16KV

2 5 6 M 2 9 I 7 9 K 4 5 6 0 9 C E J 8 D N G A 1 B C E O P Y 4 4 5 6 G S F D A A B T 1 2 5 9 A E F R V

L3 L3 L3 L3 L4 L4 L4 L4 L4 L4 L4 L4 L4 L4 L4 L4 L4 L4 L4 L4 L4 L4 L4 L4 L4 L4 L4 L4 L4 L4 L4 L4 L4 L4 L4 L4 L4 L4 L4 L4 L4 L4 L4 L4 L4 L4 L4 L4 L4 L4 L4 L4 L4 L4 L4 L4 L4 V6 V6 V6 V6 V6 V6 V6 V6 V6 V6 V6 V6 L6 V6 V6 V6 V6 V6 L5 L5 L6 V6

Toyota 1ZZFE Isuzu 4FB1,Diesel Isuzu G180Z, OHC OHV Isuzu G200Z, OHC OHV OHV Suzuki J20A DOHC DOHC OHV OHV OHV (LN2) OHV OHV Ecotec OHV Isuzu C223,Diesel Ecotec (L61) DOHC (Olds - Quad 4) DOHC (Olds - Quad 4) SOHC SOHC DOHC (Olds - Quad 4) Pontiac Eng. Pontiac Eng. Pontiac Eng. Pontiac Eng. Pontiac Eng. Pontiac Eng. Pontiac Eng. Pontiac Eng. Pontiac Eng.

AA CA OH 8 1 7 B R S W X Z D J M T Buick Eng. OHV OHV DOHC

C M E S X 6 9

Year Line Engine Disp. 87-91 86-88 89-00 85-85 98-01 92-92 76-77 86-88 87-88 85-85 85-88 88-88 98-00 79-80 80-81 82-87 76-79 78-78 98-02 81-86 72-82 82-82 82-85 87-89 83-84 99-03 75-75 76-76 83-86 83-84 93-93 92-03 00-02 03-04 90-91 81-85 02-05 95-95 90-94 71-76 71-77 96-02 78-79 82-86 80-83 79-79 91-93 85-91 82-83 82-92 78-80 62-67 69-69 70-70 68-68 04-04 05-06 82-84 80-80 82-85 86-93 85-89 85-89 81-86 81-84 90-95 00-03 94-99 90-94 62-67 78-79 78-79 96-05 93-95 91-97 04-04 05-06 37-53 83-84

1 1 1 1 2 2 3 4 4 4 5 5 6 3 3 3 3 3 10 7 8 9 11 12 12 14 13 13 12 12 15 15 15 17 15 16 17 18 18 13 13 19 20 20 20 20 20 20 20 20 20 21 21 21 21 22 22 23 23 23 23 23 23 23 23 24 24 24 24 25 26 27 28 28 28 29 29 30 27

Notation

229 (3.8) ............... 230 (3.8) ............... 230 (3.8) ............... 231 (3.8) ............... Buick Eng., Supercharged 231 (3.8) ............... Buick Eng. 231 (3.8) ............... Buick Eng., Turbo 231 (3.8) ............... Buick Eng. 231 (3.8) ............... Buick Eng. 231 (3.8) ............... Buick Eng. 235 (3.9) ............... 250 (4.1) ............... 250 (4.1) ............... 250 (4.1) ............... 250 (4.1) ............... 250 (4.1) ............... 250 (4.1) ............... 250 (4.1) ............... 250 (4.1) ............... 256 (4.2) ............... 260 (4.3) ............... Oldsmobile Eng,Diesel 260 (4.3) ............... Oldsmobile Eng,Diesel 261 (4.3) ............... 262 (4.3) ............... (incl. H.O. & Turbo) 262 (4.3) ............... (incl. H.O. & Turbo) 262 (4.3) ............... (incl. H.O. & Turbo) 262 (4.3) ............... (incl. H.O. & Turbo) 262 (4.3) ............... (incl. H.O. & Turbo) 262 (4.3) ............... 265 (4.3) ............... 265 (4.3) ............... 267 (4.4) ............... 283 (4.6) ............... 292 (4.8) ............... 292 (4.8) ............... 292 (4.8) ............... 292 (4.8) ............... 294 (4.8) ............... 302 (5.0) ............... Small Pin 302 (5.0) ............... 305 (5.0) ............... 305 (5.0) ............... 305 (5.0) ............... 305 (5.0) ............... 305 (5.0) ............... 305 (5.0) ............... 305 (5.0) ............... 305 (5.0) ............... 305 (5.0) ............... 307 (5.0) ............... 307 (5.0) ............... 307 (5.0) ............... 307 (5.0) ............... 307 (5.0) ............... 307 (5.0) ............... 307 (5.0) ............... 307 (5.0) ............... 307 (5.0) ............... 307 (5.0) ............... 307 (5.0) ............... 307 (5.0) ............... 307 (5.0) ............... Oldsmobile Eng. 323 (5.3) ............... 323 (5.3) ............... 323 (5.3) ............... 323 (5.3) ............... 325 (5.3) ............... 325 (5.3) ............... 325 (5.3) ............... 325 (5.3) ............... 325 5328cc (5.3)... 325 5328cc (5.3)... (L59) 327 (5.4) ............... Small Pin 327 (5.4) ............... 327 (5.4) ............... 327 (5.4) ............... 350 (5.7) ............... 350 (5.7) ............... 350 (5.7) ............... 350 (5.7) ...............

VIN

Cyl.

V6 L6 L6 V6 V6 V6 V6 V6 V6 L6 L6 L6 L6 L6 L6 L6 L6 L6 L6 V6 V6 L6 V6 V6 V6 V6 V6 V8 V8 V8 V8 V8 L6 L6 L6 L6 V8 V8 V8 V8 V8 V8 V8 V8 V8 V8 V8 V8 V8 V8 V8 V8 V8 V8 V8 V8 V8 V8 V8 V8 V8 V8 V8 V8 V8 V8 V8 V8 V8 V8 V8 V8 V8 V8 V8 V8 V8 V8 V8

S 1 2 3 A K L C D L N P Q S S T V B N W X Z G W J S S T V MO 7 E F G H M Q S U A B CA DC E F H ME ND P U X Y B M T Z B M P T C Z E FB HJ 4 6 7

Year Line 80-82 63-70 68-69 04-05 79-79 80-81 78-87 95-05 92-95 41-62 65-71 71-72 72-84 71-72 70-71 68-69 73-75 70-71 02-06 82-85 82-83 54-62 90-91 85-86 92-02 96-06 85-96 75-76 55-57 94-96 79-82 57-67 63-67 68-72 74-74 73-89 99-06 67-67 68-68 82-83 88-93 81-92 79-88 79-96 96-02 76-76 83-83 77-79 70-70 70-70 71-71 69-69 68-69 72-73 71-71 68-68 70-70 71-71 69-69 73-73 86-90 05-05 05-05 99-05 02-05 06-06 06-06 03-04 06-06 06-06 06-06 62-67 68-68 69-69 68-68 67-71 79-79 80-88 89-93

27 25 25 31 26 26 26 31 31 30 25 25 25 25 25 25 25 25 32 33 33 30 34 34 34 34 34 35 36 35 35 36 37 37 37 37 38 36 35 35 35 35 35 35 35 35 35 35 35 35 35 35 35 35 35 35 35 35 35 35 39 38 38 38 38 38 38 38 38 38 38 36 35 35 35 35 35 35 35

CHEVROLET CHEVROLET ENGINE INDEX (Cont’d.) Engine Disp. 350 (5.7) ............... 350 (5.7) ............... 350 (5.7) ............... 350 (5.7) ............... 350 (5.7) ............... 350 (5.7) ............... 350 (5.7) ............... 350 (5.7) ............... 350 (5.7) ............... 350 (5.7) ............... 350 (5.7) ............... 350 (5.7) ............... 350 (5.7) ............... 350 (5.7) ............... 350 (5.7) ............... 350 (5.7) ............... 350 (5.7) ............... 350 (5.7) ............... 364 (6.0) ............... 364 (6.0) ............... 364 (6.0) ............... 366 (6.0) ............... 379 (6.2) ............... 379 (6.2) ............... 395 (6.5) ............... 395 (6.5) ............... 395 (6.5) ............... 395 (6.5) ...............

Notation

Light Truck Light Truck Oldsmobile Eng.,Diesel Car Light Truck Light Truck

Light Truck Oldsmobile Eng.,Diesel

Diesel Diesel Turbo,Diesel Diesel Turbo,Diesel Diesel

VIN

Cyl.

8 E G H K K L M N P P R S T V X Y Z H N U

V8 V8 V8 V8 V8 V8 V8 V8 V8 V8 V8 V8 V8 V8 V8 V8 V8 V8 V8 V8 V8 V8 V8 V8 V8 V8 V8 V8

C J F P S Y

Year Line Engine Disp. 79-92 69-84 97-04 72-78 72-74 87-96 72-86 80-88 80-85 92-97 80-83 96-02 01-04 74-75 73-76 76-77 73-75 78-81 05-06 03-06 99-06 66-67 82-93 82-93 92-02 94-95 94-99 94-99

35 35 38 35 35 35 35 35 40 35 35 35 38 35 35 35 35 40 38 38 38 41 42 42 42 42 42 42

396 (6.5) ............... 396 (6.5) ............... 400 (6.6) ............... 400 (6.6) ............... 400 (6.6) ............... 400 (6.6) ............... 400 (6.6) ............... 400 (6.6) ............... 400 (6.6) ............... 402 (6.6) ............... 402 (6.6) ............... 402 (6.6) ............... 402 (6.6) ............... 427 (7.0) ............... 454 (7.4) ............... 454 (7.4) ............... 454 (7.4) ............... 454 (7.4) ............... 454 (7.4) ............... 454 (7.4) ............... 454 (7.4) ............... 454 (7.4) ............... 454 (7.4) ............... 454 (7.4) ............... 454 (7.4) ............... 454 (7.4) ............... 496 (8.1) ...............

Notation

VIN E

Small block Small block Small block Small block Small block Small block Small block

E K M R U X K S U B E J L N S V W X Y Z G

Cyl. V8 V8 V8 V8 V8 V8 V8 V8 V8 V8 V8 V8 V8 V8 V8 V8 V8 V8 V8 V8 V8 V8 V8 V8 V8 V8 V8

Year Line 66-70 68-69 70-71 70-72 70-70 75-75 72-80 74-76 80-80 70-71 71-71 72-72 72-72 66-69 70-71 98-99 70-71 96-00 74-75 87-97 76-80 72-72 72-89 73-73 73-77 73-75 01-05

41 41 43 43 43 43 43 43 43 41 41 41 41 41 41 41 41 41 41 41 41 41 41 41 41 41 44

CHEVROLET MODEL INDEX Model

CID

400 ASTRO 151 262 AVALANCHE 1500 323 AVALANCHE 1500 - LS 325 AVALANCHE 1500 - LT 325 AVALANCHE 1500 Z66 325 AVALANCHE 1500 Z71 325 AVALANCHE 2500 496 AVALANCHE 2500 - LS 496 AVALANCHE 2500 - LT 496 BEL AIR 230 235 250 265 267 283 305 307 327 327 350 396 400 402 427 454 BERETTA 122 134 173 189 BERETTA - GT 134 173 189 BERETTA - GTZ 140 BERETTA - Z26 BISCAYNE

Liter

Description

Years

5328 5328

6.6 Small block 2.5 Pontiac Eng. 4.3 (incl. H.O. & Turbo) 5.3 5.3 5.3

70-71 85-90 85-05 02-05 06 06

5328

5.3

5328

5.3 8.1 8.1 8.1 3.8 3.9 4.1 4.3 4.4 4.6 5.0 5.0 5.4 5.4 5.7 6.5 6.6 6.6 7.0 7.4 2.0 2.2 2.8 3.1 2.2 2.8 3.1 2.3

2474

189 140

3.1 2.3

189 230 235 250 283

3.1 3.8 3.9 4.1 4.6

06 02-04 05 05 63-65 54-62 65-73 55-57 81 57-67 81 68 68-69 Small Pin 62-67 69-75 66-69 Small block 70-75 71-72 66-69 70-75 OHV 87-89 OHV 90-96 87-89 90-96 OHV 92-93 89 90-93 DOHC (Olds - Quad 90-93 4) 91-93 DOHC (Olds - Quad 94 4) 94-96 63-65 58-62 65-72 58-67

Model BISCAYNE

CID

Liter

Description

Years

307 327 327 350 396 400 402 427 454 250 292 262 305 307 350 350 379 395 400 454

5.0 5.4 5.4 5.7 6.5 6.6 6.6 7.0 7.4 4.1 4.8 4.3 5.0 5.0 5.7 5.7 6.2 6.5 6.6 7.4

68 68-69 Small Pin 62-67 69-72 66-69 Small block 70-72 71-72 66-69 70-72 69-82 70-73 (incl. H.O. & Turbo) 95-05 77-87 69-73 69-86 Light Truck 73-94 82-91 94 Small block 75-79 73-78

262 250 350 400 402 C10 PICKUP 230 235 250 292 262 283 305 307 327 327 350 350 350 379 396 400 454 C10 PICKUP - BIG TEN 250 292 305

4.3 4.1 5.7 6.6 6.6 3.8 3.9 4.1 4.8 4.3 4.6 5.0 5.0 5.4 5.4 5.7 5.7 5.7 6.2 6.5 6.6 7.4 4.1 4.8 5.0

(incl. H.O. & Turbo) 99-01 69 69-72 Small block 70-72 72 63-66 61-62 66-84 63-80 (incl. H.O. & Turbo) 85-86 61-67 76-86 68-73 68 Small Pin 62-67 69-86 Light Truck 73-86 Oldsmobile Eng. 78-81 82-86 68-69 Small block 76-80 73-80 78-80 78-80 78-80

BLAZER

BLAZER TRAILBLAZER BROOKWOOD

CHEVROLET CHEVROLET MODEL INDEX (Cont’d.) Model

CID

C10 PICKUP - BIG TEN 350 350 350 400 454 C10 SUBURBAN 250 292 305 307 327 350 350 350 379 396 402 454 C1500 PICKUP 262 305 350 379 395 454 C1500 SUBURBAN 350 395 C20 PICKUP 230 235 250 292 262 283 305 307 327 327 350 350 366 379 396 400 454 C20 SUBURBAN 250 292 305 307 327 350 350 379 396 400 402 454 C2500 PICKUP 262 305 350 379 395 454 C2500 SUBURBAN 350 395 454 C30 PICKUP 230 235 250 292 283 305 307 327 327 350 350 350 366 379 396 400

Liter 5.7 5.7 5.7 6.6 7.4 4.1 4.8 5.0 5.0 5.4 5.7 5.7 5.7 6.2 6.5 6.6 7.4 4.3 5.0 5.7 6.2 6.5 7.4 5.7 6.5 3.8 3.9 4.1 4.8 4.3 4.6 5.0 5.0 5.4 5.4 5.7 5.7 6.0 6.2 6.5 6.6 7.4 4.1 4.8 5.0 5.0 5.4 5.7 5.7 6.2 6.5 6.6 6.6 7.4 4.3 5.0 5.7 6.2 6.5 7.4 5.7 6.5 7.4 3.8 3.9 4.1 4.8 4.6 5.0 5.0 5.4 5.4 5.7 5.7 5.7 6.0 6.2 6.5 6.6

Description

Years

78-80 Light Truck 80 Oldsmobile Eng. 78-79 Small block 80 78-80 68-80 68-74 76-86 68-73 68 69-86 Light Truck 73-86 Oldsmobile Eng. 78-81 82-86 68-69 71-72 73-80 (incl. H.O. & Turbo) 88-98 88-99 Light Truck 88-99 88-93 94-98 90-93 Light Truck 92-99 94-99 63-65 61-62 66-84 63-86 (incl. H.O. & Turbo) 85-86 61-67 77-86 68-73 68 Small Pin 62-67 69-86 Light Truck 73-86 66 82-86 68-69 Small block 76-80 73-86 68-74 68-86 76-86 68-73 68 69-86 Light Truck 73-86 82-86 68-69 Small block 76-80 71-72 73-86 (incl. H.O. & Turbo) 88-95 88-99 Light Truck 88-00 88-93 92-00 91-00 Light Truck 92-99 94-99 92-99 64-65 61-62 66-80 63-86 61-67 78-86 68-73 68 Small Pin 62-67 69-83 Light Truck 73-86 Oldsmobile Eng. 78 66 82-86 68-69 Small block 76-79

Model

CID

C30 PICKUP C3500 PICKUP

454 350 379 395 454

7.4 5.7 Light Truck 6.2 6.5 7.4

395 496 151 230 250 173 207 229 231 267 302 302 305 307 327 327 350 396 402 305 350 250 305 350 189 231 305 350 305 350 350 250 231 262 283 305 307 307 327 327 350 350 396 400 402 427 454 250 229 231 262 265 267 305 307 350 350 350 400 454

6.5 8.1 2.5 3.8 4.1 2.8 3.4 3.8 3.8 4.4 5.0 5.0 5.0 5.0 5.4 5.4 5.7 6.5 6.6 5.0 5.7 4.1 5.0 5.7 3.1 3.8 5.0 5.7 5.0 5.7 5.7 4.1 3.8 4.3 4.6 5.0 5.0 5.0 5.4 5.4 5.7 5.7 6.5 6.6 6.6 7.0 7.4 4.1 3.8 3.8 4.3 4.3 4.4 5.0 5.0 5.7 5.7 5.7 6.6 7.4

C3500 PICKUP - HD CHASSIS CAB CAMARO

CAMARO - IROC-Z CAMARO - LT CAMARO - RS CAMARO - SS CAMARO - Z28 CAPRICE

CAPRICE - CLASSIC

CAPRICE - CLASSIC BROUGHAM CAPRICE - CLASSIC LS CAPRICE - CLASSIC LTZ CAPRICE - ESTATE

2474

Liter

Description

Years 73-86 88-00 88-93 92-00 88-00

01-02 01-02 Pontiac Eng. 82-86 67-69 67-79 82-89 OHV 93-95 80-81 Buick Eng. 80-02 80-81 68 Small Pin 67 76-89 69-73 68-69 Small Pin 67 67-89 67-70 70-72 90 90 77 76-77 76-77 90-92 Buick Eng. 96-97 90-92 98-02 91-92 72-02 Car 93-97 67-78 Buick Eng. 85 (incl. H.O. & Turbo) 86-92 66-67 78-92 68 Oldsmobile Eng. 87 68-69 Small Pin 66-67 69-93 Car 94 66-69 Small block 70-72 71-72 66-69 70-72 77-79 80-84 Buick Eng. 80-84 (incl. H.O. & Turbo) 85-93 94-96 80-82 77-93 Oldsmobile Eng. 86-90 73-93 Car 94-96 Oldsmobile Eng. 80-85 Small block 73-76 73-76

262 305

4.3 (incl. H.O. & Turbo) 87-88 5.0 87-90

265 305

4.3 5.0

94 93

305 350 305 350 400 454

5.0 5.7 5.0 5.7 6.6 Small block 7.4

91-92 91-93 77 73-77 73-76 73-76

CHEVROLET CHEVROLET MODEL INDEX (Cont’d.) Model CAPRICE - LS CAVALIER

CAVALIER - CL CAVALIER - CS CAVALIER - LS

CAVALIER - RS

CAVALIER - TYPE-10 CAVALIER - VL CAVALIER - Z24

CID

Liter

Description

5.7 1.8 2.0 2.2 2.2 2.2 2.4

Car OHV OHV Ecotec OHV Ecotec DOHC (Olds - Quad 4)

173 189 122 122 173 134 138

2.8 3.1 2.0 2.0 2.8 2.2 2.3

146

2.4

122 134 173 189 122 173 122 134 138

2.0 2.2 2.8 3.1 2.0 2.8 2.0 2.2 2.3

85-89 90 OHV 83 OHV 83-87 85-87 OHV 95-98 DOHC (Olds - Quad 95 4) DOHC (Olds - Quad 96-98 4) OHV 86-88 OHV 91-98 86-88 91-94 OHV 83-85 85 OHV 88 OHV 90-94 DOHC (Olds - Quad 95 4) DOHC (Olds - Quad 96-98 4) 86-89 90-94 Pontiac Eng. 82-90 82-89 90 Oldsmobile Eng 82-85 64-66 64-67 67-72 64-67 70-72 Small Pin 64-67 70-72 67 Small block 70 70-72 72 68 68 68 68 68

350 112 122 134 134 134 146

2198

146

CELEBRITY

CHEVELLE

CHEVELLE - 300

CHEVELLE - 300 DELUXE

CHEVELLE CONCOURS

CHEVELLE CONCOURS ESTATE

CHEVELLE - DELUXE

CHEVELLE GREENBRIER

173 189 151 173 189 260 194 230 250 283 307 327 350 396 400 402 454 230 250 307 327 396

2.4

2474

2.8 3.1 2.5 2.8 3.1 4.3 3.2 3.8 4.1 4.6 5.0 5.4 5.7 6.5 6.6 6.6 7.4 3.8 4.1 5.0 5.4 6.5

Years 94 82 83-89 03-04 90-02 02-05 99-02

Model CHEVELLE GREENBRIER

CHEVELLE - MALIBU

CHEVELLE - NOMAD

CHEVELLE - SS CHEVETTE CHEVETTE - CS CHEVETTE SCOOTER CHEVY II

CHEVY II - NOVA

CITATION CLASSIC COBALT COLORADO COLORADO - LS COLORADO - LT

230 250 307 350 396

3.8 4.1 5.0 5.7 6.5

68 68 69 69 69

230 250 307 350 396 400 402

3.8 4.1 5.0 5.7 6.5 6.6 Small block 6.6

68 68-71 69-72 69-72 69 70 72

COLORADO - WT

307 350 396 402 250 307 350 454

5.0 5.7 6.5 6.6 4.1 5.0 5.7 7.4

69-72 69-72 69 70-72 73 73 73 73

COLORADO - Z85 LS

230 250 307

3.8 4.1 5.0

69 69-71 69-72

COLORADO - SPORT COLORADO - SPORT LS

COLORADO - Z71 COLORADO - Z71 LS COLORADO - Z85

CORSICA

CORSICA - LT CORSICA - LTZ CORVETTE

CID 350 396 400 402 230 250 307 327 350 396 400 402 454 230 250 307 327 350 396 400 402 396 400 85 98 110 98 110

1393 1819 1819

85 98 153 194 230 250 283 327 153 230 250 307 327 350 396 151 173 134 134 169 211 169 169 211 169 211

1393

169 211 169 211 169 211 169 211 169 211 169 211 122 134 173 189 134 189 173 189 235 265

2770 3460 2770 3460 2770 3460 2770 3460 2770 3460 2770 3460

2474 2198 2198 2770 3460 2770 2770 3460 2770 3460

Liter 5.7 6.5 6.6 6.6 3.8 4.1 5.0 5.4 5.7 6.5 6.6 6.6 7.4 3.8 4.1 5.0 5.4 5.7 6.5 6.6 6.6 6.5 6.6 1.4 1.6 1.8 1.6 1.8 1.4 1.6 2.5 3.2 3.8 4.1 4.6 5.4 2.5 3.8 4.1 5.0 5.4 5.7 6.5 2.5 2.8 2.2 2.2 2.8 3.5 2.8 2.8 3.5 2.8 3.5

Description

Small block

Small block Small block Chevette Isuzu 4FB1 Isuzu 4FB1 Chevette

Small Pin

Pontiac Eng. Ecotec Ecotec

2.8 3.5 2.8 3.5 2.8 3.5 2.8 3.5 2.8 3.5 2.8 3.5 2.0 OHV 2.2 OHV 2.8 3.1 2.2 OHV 3.1 2.8 3.1 3.9 4.3

Years 69-72 69 70 70-72 68-69 68-72 68-72 68 69-72 68-69 70-71 70-72 70-72 68-69 68-72 68-72 68 69-72 68-69 70 70-72 66-68 71 76-77 76-85 81-85 84-87 84-86 76 76-83 62-67 62-67 64-66 67 62-67 65-67 68-69 68-69 68-69 68-69 68 68-69 68-69 80-85 80-85 04-05 05 04 04 06 06 06 05 05 05 05 06 06 05 05 05 05 05 05 05 05 87-89 94-96 87-89 94-96 90-93 90-93 89 90 54-55 55-56

CHEVROLET CHEVROLET MODEL INDEX (Cont’d.) Model CORVETTE

CID

283 305 327 327 350 350 364 427 454 CORVETTE - Z06 350 DEL RAY 235 283 EL CAMINO 194 230 250 200 229 231 262 267 283 305 307 327 327 350 350 396 400 402 454 EL CAMINO - CLASSIC 250 305 350 EL CAMINO - CUSTOM 230 250 307 327 350 396 400 402 454 EXPRESS 1500 262 305 323 325 350 EXPRESS 1500 - LS 262 325 EXPRESS 1500 - LT 262 325 EXPRESS 2500 262 294 305 323 350 364 395 EXPRESS 3500 294 350 364 395 454 496 EXPRESS 3500 - LS 364 EXPRESS 3500 - LT 364 G10 VAN 153 194 230 250 262 305 307 350 350 454 G10 VAN - EXPRESS 262 305

Liter 4.6 5.0 5.4 5.4 5.7 5.7 6.0 7.0 7.4 5.7 3.9 4.6 3.2 3.8 4.1 3.3 3.8 3.8 4.3 4.4 4.6 5.0 5.0 5.4 5.4 5.7 5.7 6.5 6.6 6.6 7.4 4.1 5.0 5.7 3.8 4.1 5.0 5.4 5.7 6.5 6.6 6.6 7.4 4.3 5.0 5.3 5.3 5.7 4.3 5.3 4.3 5.3 4.3 4.8 5.0 5.3 5.7 6.0 6.5 4.8 5.7 6.0 6.5 7.4 8.1 6.0 6.0 2.5 3.2 3.8 4.1 4.3 5.0 5.0 5.7 5.7 7.4 4.3 5.0

Description

Small Pin Car

Buick Eng. (incl. H.O. & Turbo)

Small Pin Oldsmobile Eng. Small block

Small block (incl. H.O. & Turbo)

Light Truck (incl. H.O. & Turbo) (incl. H.O. & Turbo) (incl. H.O. & Turbo)

Light Truck

(incl. H.O. & Turbo)

Light Truck (incl. H.O. & Turbo)

Years 57-61 80 68 62-67 69-04 92-96 05-06 66-69 70-74 01-04 58 58 64-65 64-69 67-77 78-79 80-84 78-84 85-87 79-82 59-67 76-87 68-73 68 64-67 69-79 83-84 66-70 70-76 71-72 70-74 77 77 77 68-69 68-73 68-72 68 69-74 69 70-74 71-72 70-74 99-06 99-02 03-05 06 99-02 06 06 06 06 99-05 03-06 99-02 03-05 99-02 03-06 99-02 06 99-02 03-06 99-02 99-00 01-02 06 06 64-65 64-66 66-69 67-84 85-97 77-97 69-73 70-84 73-97 73-74 96-97 96-97

Model

CID

G10 VAN - EXPRESS 350 G10 VAN - SPORTVAN 230 250 262 305 307 350 350 G1500 VAN 262 305 350 G20 VAN 230 250 292 262 305 307 350 350 379 395 400 454 G20 VAN - EXPRESS 262 305 350 395 G20 VAN - SPORTVAN 230 250 292 262 305 307 350 350 379 395 400 G2500 VAN 262 305 350 395 G30 VAN 250 292 262 305 350 350 379 395 400 454 G30 VAN - EXPRESS 350 395 454 G30 VAN - SPORTVAN 250 292 350 350 379 395 400 454 G3500 VAN 350 395 454 IMPALA 230 235 250 207 229 231 262 267 283 305 307 327 327

Liter 5.7 3.8 4.1 4.3 5.0 5.0 5.7 5.7 4.3 5.0 5.7 3.8 4.1 4.8 4.3 5.0 5.0 5.7 5.7 6.2 6.5 6.6 7.4 4.3 5.0 5.7 6.5 3.8 4.1 4.8 4.3 5.0 5.0 5.7 5.7 6.2 6.5 6.6 4.3 5.0 5.7 6.5 4.1 4.8 4.3 5.0 5.7 5.7 6.2 6.5 6.6 7.4 5.7 6.5 7.4 4.1 4.8 5.7 5.7 6.2 6.5 6.6 7.4 5.7 6.5 7.4 3.8 3.9 4.1 3.4 3.8 3.8 4.3 4.4 4.6 5.0 5.0 5.4 5.4

Description Light Truck (incl. H.O. & Turbo)

Light Truck (incl. H.O. & Turbo) Light Truck

(incl. H.O. & Turbo)

Light Truck Small block (incl. H.O. & Turbo) Light Truck

(incl. H.O. & Turbo)

Light Truck Small block (incl. H.O. & Turbo) Light Truck

(incl. H.O. & Turbo) Light Truck Small block Light Truck

Light Truck Small block Light Truck

OHV Buick Eng. (incl. H.O. & Turbo)

Small Pin

Years 96-97 68-69 68-84 85-93 77-93 68-73 70-86 73-93 98 98 98 67-69 68-84 71-80 85-97 77-97 68-69 70-86 73-97 83-93 94-97 75-80 73-76 96-97 96-97 96-97 97 68-69 68-84 75-78 85-95 77-95 68-69 70-86 73-95 83-93 94-95 75-80 98 98 98 98 71-84 71-79 85-96 78-85 71-80 73-97 83-93 94-97 75-80 73-97 96-97 96-97 96-97 71-74 75-78 71-86 73-96 83-93 94-96 75-80 88-96 98 98 98 63-65 59-62 65-79 00-05 80-84 80-05 85 80-82 59-67 77-85 68 68-69 62-67

CHEVROLET CHEVROLET MODEL INDEX (Cont’d.) Model IMPALA

IMPALA - CUSTOM

IMPALA - LS IMPALA - SS IMPALA SS K10 PICKUP

K10 SUBURBAN

K1500 PICKUP

K1500 SUBURBAN K20 PICKUP

K20 SUBURBAN

K2500 PICKUP

CID 350 350 396 400 402 427 454 250 305 350 400 454 231 231 325 350 230 235 250 261 292 262 283 305 307 327 327 350 350 379 396 400 454 250 305 307 327 350 350 379 396 400 402 262 305 350 379 395 350 395 230 235 250 261 292 262 283 305 307 327 327 350 350 366 379 396 400 454 250 292 305 307 327 350 350 379 400 454 262

5328

Liter 5.7 5.7 6.5 6.6 6.6 7.0 7.4 4.1 5.0 5.7 6.6 7.4 3.8 3.8 5.3 5.7 3.8 3.9 4.1 4.3 4.8 4.3 4.6 5.0 5.0 5.4 5.4 5.7 5.7 6.2 6.5 6.6 7.4 4.1 5.0 5.0 5.4 5.7 5.7 6.2 6.5 6.6 6.6 4.3 5.0 5.7 6.2 6.5 5.7 6.5 3.8 3.9 4.1 4.3 4.8 4.3 4.6 5.0 5.0 5.4 5.4 5.7 5.7 6.0 6.2 6.5 6.6 7.4 4.1 4.8 5.0 5.0 5.4 5.7 5.7 6.2 6.6 7.4 4.3

Description Oldsmobile Eng. Small block

Small block Buick Eng. Buick Eng. Car

(incl. H.O. & Turbo)

Small Pin Light Truck Small block

Light Truck Small block (incl. H.O. & Turbo) Light Truck Light Truck

(incl. H.O. & Turbo)

Small Pin Light Truck

Small block

Light Truck Small block (incl. H.O. & Turbo)

Years 69-85 80-85 66-69 70-76 71-72 66-69 70-76 77 77 76-77 76 76 00-05 04-05 06 94-96 64-69 61-62 66-84 61-62 64-80 85-86 61-67 77-86 68-69 68 62-67 69-86 73-86 82-86 68 75-80 74-80 68-80 76-86 68-73 68 69-86 73-86 82-86 68 75-79 71 88-98 88-99 88-99 88-93 94-98 92-99 94-99 64-65 61-62 66-80 61-62 64-86 85 61-67 77-85 68-69 68 62-67 69-86 73-86 66 82-86 68 75-80 73-80 68-74 68-86 77-86 68-73 68 69-86 73-86 82-86 75-80 73-85 88-95

Model

CID

K2500 PICKUP

305 350 379 395 454 350 395 454 250 292 307 327 350 350 379 396 400 454 350 379 395 454 350 400 402 454

5.0 5.7 6.2 6.5 7.4 5.7 6.5 7.4 4.1 4.8 5.0 5.4 5.7 5.7 6.2 6.5 6.6 7.4 5.7 6.2 6.5 7.4 5.7 6.6 6.6 7.4

350 400 402 454 305 350 400 454 350 454

5.7 6.6 Small block 6.6 7.4 5.0 5.7 6.6 Small block 7.4 5.7 7.4

K2500 SUBURBAN K30 PICKUP

K3500 PICKUP

KINGSWOOD

KINGSWOOD ESTATE

LAGUNA

LAGUNA - ESTATE LLV (POSTAL VEHICLE) LUMINA

LUMINA - EURO LUMINA - LS LUMINA - LTZ LUMINA - Z34 LUMINA APV LUV PICKUP MALIBU

MALIBU - CLASSIC

134 151 133 151 189 231 189 207 189 207 189 207 231 207 189 207 231 111 134 134 146 194 230 250 189 200 229 231 260 267 283 305 307 327 350 350 396 400 454 250

2474 2180 2474

2198

Liter

2.2 2.5 2.2 2.5 3.1 3.8 3.1 3.4 3.1 3.4 3.1 3.4 3.8 3.4 3.1 3.4 3.8 1.8 2.2 2.2 2.4 3.2 3.8 4.1 3.1 3.3 3.8 3.8 4.3 4.4 4.6 5.0 5.0 5.4 5.7 5.7 6.5 6.6 7.4 4.1

Description Light Truck

Light Truck

Light Truck Small block Light Truck

Small block

OHV Pontiac Eng. OHV Pontiac Eng.

Years 88-99 88-00 88-93 92-00 91-00 92-99 94-99 92-99 68-74 68-86 68-73 68 69-85 73-86 82-86 68 77-80 73-86 88-00 88-93 92-00 88-00 69-72 70-72 71-72 70-72 69-72 70-72 71-72 72 76 73-76 74-76 73-74 73 73

94-95 87-93 93 90-92 90-01 Buick Eng. 99 90-94 DOHC 92-94 95-97 DOHC 95-96 97-98 DOHC 97 Buick Eng. 98 DOHC 91-94 90-95 OHV 96 Buick Eng. 92-95 Isuzu G180Z, OHC 72-82 Isuzu C223 81-82 Ecotec 04-05 DOHC (Olds - Quad 97-99 4) 64-66 64-67 67-77 97-03 78-79 80-83 Buick Eng. 78-83 Oldsmobile Eng 83 79-81 64-67 76-83 73 Small Pin 64-67 73-81 Oldsmobile Eng. 83 66-67 Small block 74-76 73-74 74-77

CHEVROLET CHEVROLET MODEL INDEX (Cont’d.) Model MALIBU - CLASSIC

MALIBU - ESTATE

MALIBU - LS METRO METRO - GSI METRO - LSI MONTE CARLO

MONTE CARLO - LS MONTE CARLO - LT MONTE CARLO - SS MONTE CARLO - Z34 MONZA

MONZA - 2+2

NOVA

NOVA - CONCOURS NOVA - CUSTOM

ONE-FIFTY SERIES P10 SERIES

CID 200 229 231 260 267 305 350 350 400 454 307 350 400 454 189 61 79 79 79 189 200 229 231 260 262 267 305 350 350 400 402 454 189 207 231 231 305 325 207 231 140 151 196 231 262 305 350 140 151 196 231 262 305 98 98 153 194 230 250 262 283 305 307 327 350 396 402 250 305 350 250 262 305 307 350 235 265 283 153

993 1295 1295 1295

5328

2474

1588 1588

Liter 3.3 3.8 3.8 4.3 4.4 5.0 5.7 5.7 6.6 7.4 5.0 5.7 6.6 7.4 3.1 1.0 1.3 1.3 1.3 3.1 3.3 3.8 3.8 4.3 4.3 4.4 5.0 5.7 5.7 6.6 6.6 7.4 3.1 3.4 3.8 3.8 5.0 5.3 3.4 3.8 2.3 2.5 3.2 3.8 4.3 5.0 5.7 2.3 2.5 3.2 3.8 4.3 5.0 1.6 1.6 2.5 3.2 3.8 4.1 4.3 4.6 5.0 5.0 5.4 5.7 6.5 6.6 4.1 5.0 5.7 4.1 4.3 5.0 5.0 5.7 3.9 4.3 4.6 2.5

Description

Years

78-79 80-82 Buick Eng. 78-82 Oldsmobile Eng 82 79-82 76-82 74-79 Oldsmobile Eng. 82 Small block 74-76 74-75 73 73-76 Small block 74-76 73-74 97-03 Suzuki G10 98-00 Suzuki G13BA 92-00 Suzuki G13BA 92 Suzuki G13BA 98-01 99 78-79 80-84 Buick Eng. 78-99 Oldsmobile Eng 82-83 (incl. H.O. & Turbo) 85-88 79-82 76-88 70-81 Oldsmobile Eng. 82-84 Small block 70-76 70-72 70-75 95-98 OHV 00-05 Buick Eng. 05 Buick Eng. 00-05 84-88 06 DOHC 95-97 Buick Eng. 98 SOHC 75-77 Pontiac Eng. 78-80 Buick Eng. 78-79 Buick Eng. 78-80 75-76 76-79 75 SOHC 76-77 Pontiac Eng. 78-80 Buick Eng. 78-79 Buick Eng. 78-80 76 76-79 Toyota 4AGE 88 Toyota 4ALC 85-88 62-70 62-67 64-70 67-79 75 62-67 76-79 70-73 Small Pin 65-67 70-79 70 70 76-77 76-77 76-77 73-79 75 78-79 73 73-79 54-57 55-57 57 63-65

Model P10 SERIES

P10 VAN

P20 SERIES

P20 VAN

P30 SERIES

P30 VAN

PRIZM R10 PICKUP

R10 SUBURBAN R1500 SUBURBAN R20 PICKUP

R20 SUBURBAN R2500 PICKUP R2500 SUBURBAN R30 PICKUP

R3500 PICKUP S10 BLAZER

CID 194 230 235 292 283 327 230 250 292 305 350 350 400 454 230 235 250 292 283 327 366 250 292 307 350 350 379 454 230 235 250 292 283 327 366 250 292 262 307 350 350 379 395 400 454 110 262 305 350 379 305 350 379 350 379 292 262 305 350 379 454 350 379 454 379 454 350 379 454 292 350 379 454 350 379 454 119 122 134

Liter 3.2 3.8 3.9 4.8 4.6 5.4 3.8 4.1 4.8 5.0 5.7 5.7 6.6 7.4 3.8 3.9 4.1 4.8 4.6 5.4 6.0 4.1 4.8 5.0 5.7 5.7 6.2 7.4 3.8 3.9 4.1 4.8 4.6 5.4 6.0 4.1 4.8 4.3 5.0 5.7 5.7 6.2 6.5 6.6 7.4 1.8 4.3 5.0 5.7 6.2 5.0 5.7 6.2 5.7 6.2 4.8 4.3 5.0 5.7 6.2 7.4 5.7 6.2 7.4 6.2 7.4 5.7 6.2 7.4 4.8 5.7 6.2 7.4 5.7 6.2 7.4 1.9 2.0 2.2

Description

Years

66 63-67 62 67 62 Small Pin 62 68-69 68-74 75-80 79 77-78 Light Truck 73-75 Small block 77 73 63-65 61 66 64-67 61-62 Small Pin 62 66-67 70-74 68-89 68-69 70-79 Light Truck 73-89 82-89 70-79 63-65 61 66 64-67 61-62 Small Pin 62 66-67 70-79 68-89 (incl. H.O. & Turbo) 90-99 68-69 70-80 Light Truck 73-99 82-93 94-99 Small block 72-76 70-99 Toyota 1ZZFE 98-02 (incl. H.O. & Turbo) 87 87 Light Truck 87 87 87 Light Truck 87-88 87-88 Light Truck 89-91 89-91 87-88 (incl. H.O. & Turbo) 87 87 Light Truck 87-88 87-88 87-88 Light Truck 87-88 87-88 87-88 89 89 Light Truck 89-91 89-91 89-91 87-88 Light Truck 87-88 87-88 87-88 Light Truck 89-91 89-91 89-91 Isuzu G200Z, OHC 83-84 OHV 83-84 Isuzu C223 84

CHEVROLET CHEVROLET MODEL INDEX (Cont’d.) Model S10 BLAZER

CID

151 173 262 S10 PICKUP 119 122 134 134 151 173 262 SILVERADO - SS 364 SILVERADO 1500 262 294 323 SILVERADO 1500 - LS 262 294 325 325 SILVERADO 1500 - LT 294 325 325 364 SILVERADO 1500 - WT 262 294 325 325 SILVERADO 1500 HD 364 SILVERADO 1500 HD - LT 364 SILVERADO 2500 323 364 496 SILVERADO 2500 HD 364 496 SILVERADO 2500 HD - LS 364 SILVERADO 2500 HD - LT 364 SILVERADO 2500 HD - WT 364 SILVERADO 3500 364 496 SILVERADO 3500 - LS 364 SILVERADO 3500 - LT 364 SILVERADO 3500 - WT 364 SPECTRUM 92 92 SPRINT 61 61 SPRINT - ER 61 SPRINT - PLUS 61 SSR 325 364 SUBURBAN 230 235 250 292 283 327 366 SUBURBAN 1500 323 325 SUBURBAN 1500 - LS 323 325 SUBURBAN 1500 - LT 323 325 SUBURBAN 1500 - LTZ 325 SUBURBAN 1500 - Z71 323 325 SUBURBAN 2500 323 364 496 SUBURBAN 2500 - LS 364 496 SUBURBAN 2500 - LT 364 496 TAHOE 294

Liter

2474

2.5 2.8 4.3 1.9 2.0 2.2 2.2 2.5 2.8 4.3 6.0 4.3 4.8 5.3 4.3 4.8 5.3 5.3 4.8 5.3 5.3 6.0 4.3 4.8 5.3 5.3 6.0

2474

5328 5328

5328

Description Pontiac Eng.

Years

Model

85-88 83-90 88-94 82-85 83-84 83-85 94-03 85-93 82-93 88-04 03-06 99-05 99-05 99-05 06 06 06 06 06 06 06 06 06 06 06 06 01-05

TAHOE

6.0 5.3 6.0 8.1 6.0 8.1

06 99-00 99-04 01-02 01-05 01-05

TRAILBLAZER - LS

6.0

6.0 6.0 8.1 6.0 6.0 6.0 1.5 1.5 1.0 1.0 1.0 1.0 5.3 6.0 3.8 3.9 4.1 4.8 4.6 5.4 6.0 5.3 5.3 5.3 5.3 5.3 5.3 5.3 5.3 5.3 5.3 6.0 8.1 6.0 8.1 6.0 8.1 4.8

06 01-05 01-05 06 06 06 85-88 87-88 85-91 87-91 87-88 86 03 05-06 63-67 61-62 66-67 63-67 61-67 62-67 66 00-04 06 05 06 05 06 06 05 06 00 00-04 01-04 05-06 05 05-06 05 00-06

(incl. H.O. & Turbo) Isuzu G200Z, OHC OHV Isuzu C223 OHV Pontiac Eng. (incl. H.O. & Turbo) (incl. H.O. & Turbo) (incl. H.O. & Turbo)

(incl. H.O. & Turbo)

TAHOE - LS TAHOE - LT TAHOE - Z71 TOWNSMAN

TRACKER TRAILBLAZER TRAILBLAZER - EXT TRAILBLAZER - EXT LS TRAILBLAZER - EXT LT

TRAILBLAZER - LT TRAILBLAZER - SS TRUCK

TWO-TEN SERIES

1471 1471 993 993 993 993

5328 5328 5328 5328 5328

Isuzu 4XC1 Isuzu 4XC1T Suzuki G10 Suzuki G10T Suzuki G10 Suzuki G10

Small Pin

V10 PICKUP

V10 SUBURBAN V1500 SUBURBAN V20 PICKUP V20 SUBURBAN V2500 SUBURBAN V30 PICKUP

V3500 PICKUP VEGA VEGA - COSWORTH VEGA - PANEL VENTURE VENTURE - LS VENTURE - LT VENTURE - PLUS

CID 323 325 350 395 294 323 325 323 325 323 325 350 400 402 454 98 122 256 256 325

cc 5328

5328 5328 5328

1588

Liter 5.3 5.3 5.7 6.5 4.8 5.3 5.3 5.3 5.3 5.3 5.3 5.7 6.6 6.6 7.4 1.6 2.0 4.2 4.2 5.3

Description

Light Truck

Small block Suzuki G16KV Suzuki J20A

Years 00-04 06 95-00 95-99 05-06 05 06 05 06 05 06 69-72 70-72 72 70-72 98-00 99-03 02-04 02-04 03-04

256 323 325

4.2 5.3 5.3

05-06 05 06

256 323 325 256 325 256 325 364 216 235 261 265 283 235 265 283 262 305 350 379 350 379 350 379 292 350 379 350 379 454 350 379 454 292 350 379 454 350 379 454 122 140 122 140 207 207 207 207

4.2 5.3 5.3 4.2 5.3 4.2 5.3 6.0 3.5 3.9 4.3 4.3 4.6 3.9 4.3 4.6 4.3 5.0 5.7 6.2 5.7 6.2 5.7 6.2 4.8 5.7 6.2 5.7 6.2 7.4 5.7 6.2 7.4 4.8 5.7 6.2 7.4 5.7 6.2 7.4 2.0 2.3 2.0 2.3 3.4 3.4 3.4 3.4

05-06 05 06 05-06 06 05-06 06 06 42-53 52-60 54-59 55-57 57-60 54-57 55-57 57 (incl. H.O. & Turbo) 87 87 Light Truck 87 87 Light Truck 87-88 87-88 Light Truck 89-91 89-91 87 Light Truck 87 87 Light Truck 87-88 87-88 87-88 Light Truck 89-91 89-91 90 87-88 Light Truck 87-88 87-88 87-88 Light Truck 89-91 89-91 89-91 DOHC 75 SOHC 71-77 DOHC 76 SOHC 74-75 OHV 97-04 OHV 05 OHV 05 OHV 05

CHEVROLET Engine Set No. Sizes Available

Type and Location

Standard Shaft Size

Housing Bore

Max. Bearing Thickness

Vertical Oil Clearance

ENGINE

VIN CYL

Bore x Stroke

61 993cc (1.0) Suzuki G10T Turbo 61 993cc (1.0) Suzuki G10 61 993cc (1.0) Suzuki G10 61 993cc (1.0) Suzuki G10

2 5 6 M

74mm x 77mm 74mm x 77mm 74mm x 77mm 74mm x 77mm

L3 L3 L3 L3

Max. Overall Length

Material Code

Qty. Set

Bearing Shell No.

TORQUE SETTINGS Connecting Rod 24-27 ft.lbs/32-36 Nm Main Bearing 36-41 ft.lbs/49-55 Nm

Rod

3B8336

41.983/1.6529 41.999/1.6535

44.998/1.7716 45.018/1.7724

1.490/0.0587 .020/.0008 .068/.0027

18.00/0.709

F780

8336 IH

44.983/1.7710 44.998/1.7716

48.998/1.9291 49.018/1.9298

2.000/0.0787 .020/.0008 .068/.0027

18.00/0.709

F780

8337 U/L

52.250/2.0571 67.900/2.6732 2.52/0.099 (Nominal I.D.) (Nominal O.D.) Note: Thrust set includes two pieces, use on No.3 position. Required with 4M8337 main set.

F250

8337T IH

Std. .25 .50 .75 1.0

4M8337

Main 1-4

Std. .25 .50 .75 1.0 Thrust

1T8337 Std.

ENGINE

VIN CYL

Bore x Stroke

79 1295cc (1.3) Suzuki G13BA 79 1295cc (1.3) Suzuki G13BA

2 9

74mm x 75.5mm 74mm x 75.5mm

L4 L4

TORQUE SETTINGS Connecting Rod 24-27ft.lbs/33-37 Nm Main Bearing 37-41 ft.lbs/50-56 Nm

Rod

4B8336

41.984/1.6529 41.999/1.6535

44.998/1.7716 45.018/1.7724

1.490/0.0587 .020/.0008 .068/.0027

18.00/0.709

F780

8336 IH

44.983/1.7710 44.998/1.7716

48.998/1.9291 49.018/1.9298

2.000/0.0787 .020/.0008 .068/.0027

18.00/0.709

F780

8337 U/L

52.250/2.0571 67.900/2.6732 2.52/0.099 (Nominal I.D.) (Nominal O.D.) Note: Thrust set includes two pieces, use on No.3 position. Required with 5M8337 main set.

F250

8337T IH

Std. .25 .50 .75 1.0

5M8337

Main 1-5

Std. .25 .50 .75 1.0 Thrust

1T8337 Std.

ENGINE

VIN CYL

Bore x Stroke

85 1393cc (1.4) Chevette 98 (1.6) 98 (1.6) 98 (1.6) 98 (1.6) 98 (1.6)

I 0 9 C E J

3.23 x 2.60 3.23 x 2.99 3.23 x 2.99 3.23 x 2.99 3.23 x 2.99 3.23 x 2.99

L4 L4 L4 L4 L4 L4

TORQUE SETTINGS Connecting Rod 37 ft.lbs/50 Nm (1976-77 engines only)

Connecting Rod 40 ft.lbs/54 Nm (1978-87 engines only)

Main Bearing 46 ft.lbs/63 Nm (1976-77 engines only) Main Bearing 50 ft.lbs/68 Nm (1978-87 engines only)

Rod

4B1216P

45.959/1.8094 45.984/1.8104

49.000/1.9291 49.012/1.9296

1.500/0.0591 .036/.0014 .089/.0035

19.05/0.750

F780

1216 IH

50.998/2.0078 51.024/2.0088

54.986/2.1648 55.011/2.1658

1.970/0.0777 .023/.0009 .089/.0035

17.98/0.708

F780

MB2737AL IH

50.988/2.0074 54.986/2.1648 1.980/0.0778 .041/.0016 51.013/2.0084 55.011/2.1658 .107/.0042 Overflange length remains constant for standard and undersizes.

23.90/0.941

F780

MB2738AL IH

Std. 10 20 30

5M1424P

Main 1,2,3,4

Std. 10 20 30 5 (Fl)

ENGINE

VIN CYL

92 1471cc (1.5) Isuzu 4XC1 7 92 1471cc (1.5) Isuzu 4XC1T Turbo 9 92 1471cc (1.5) Isuzu 4XC1 K

L4 L4 L4

Bore x Stroke 77mm x 79mm 77mm x 79mm 77mm x 79mm

TORQUE SETTINGS Connecting Rod 24-27 ft.lbs/32-36 Nm Main Bearing 61-69 ft.lbs/83-93 Nm

Rod

4B1870 Std. .25 .50 .75

5M1869 Std. .25 .50 .75

Main 1-5

39.929/1.5720 39.945/1.5726

42.980/1.6921 43.000/1.6929

1.506/0.0593

17.00/0.669

F780

1870 IH

47.918/1.8865 47.938/1.8873

51.976/2.0463 52.000/2.0472

2.010/0.0791 .018/.0007 .089/.0035

17.00/0.669

F780

1869 U/L

CHEVROLET Type and Location

Standard Shaft Size

Max. Bearing Thickness

Housing Bore

Vertical Oil Clearance

Max. Overall Length

Material Code

Qty. Set

Bearing Shell No.

Engine Set No. Sizes Available

(Contâ&#x20AC;&#x2122;d.) Thrust 3

54.700/2.1535 69.700/2.7441 2.20/0.087 54.900/2.1614 69.900/2.7520 Note: Thrust set includes two pieces. Use on No. 3 position. Required with 5M1869 main set.

ENGINE

VIN CYL

Bore x Stroke

98 1588cc (1.6) Toyota 4ALC 98 1588cc (1.6) Toyota 4AGE

4 5

81mm x 77mm 81mm x 77mm

L4 L4

17.09/0.673

Rod - for DOHC Type 5 engines only. 41.986/1.6530 45.001/1.7717 42.000/1.6535 45.024/1.7726

1.490/0.0587 .020/.0008 .084/.0033

17.09/0.673

2.004/0.0789 .012/.0005 .084/.0033 2.004/0.0789 .012/.0005 .084/.0033

19.90/0.783

1-5

52.020/2.0480 52.050/2.0492 52.020/2.0480 52.050/2.0492

F810

F780

F810

19.90/0.783

F810

53.500/2.1063 65.750/2.5886 2.49/0.098 53.750/2.1161 66.000/2.5984 Note: Thrust set includes four pieces, use on No. 3 position. Required with 5M1695 main set.

F861

Thrust 3

ENGINE

VIN CYL

Bore x Stroke

98 1588cc (1.6) Suzuki G16KV

75mm x 90mm

1869T IH

1T1869 Std.

Connecting Rod 36 ft. lbs/49 Nm Main Bearing 44 ft.lbs/59 Nm

1.498/0.0590 .005/.0002 .069/.0027

47.985/1.8892 48.000/1.8898 47.985/1.8892 48.000/1.8898

TORQUE SETTINGS

Rod - for SOHC Type 4 engines only. 39.985/1.5742 43.000/1.6929 40.000/1.5748 43.024/1.6939

Main 1-5

F250

4B1710

1710A IH

Std. .25 .50 .75 1.0

1780 IH

Std. .25 .50 .75 1.0

1695A L 1704A U 1695T U/L

4B1780

5M1695 Std. .25 .50 .75 1.0

2T1695 Std.

TORQUE SETTINGS

Connecting Rod 24-27 ft.lbs/33-37 Nm Main Bearing 37-41 ft.lbs/50-56 Nm

Rod

Main 1-5

43.983/1.7316 44.000/1.7323

47.000/1.8504 47.020/1.8512

1.495/0.0589 .010/.0004 .076/.0030

18.10/0.713

51.982/2.0465 52.000/2.0472

56.000/2.2047 56.018/2.2054

2.005/0.0789 .010/.0004 .072/.0028

18.10/0.713

Thrust 3

59.436/2.3400 74.498/2.9330 59.690/2.3500 74.752/2.9430 Note: Set includes two pieces, use on No. 3 position. Required with 5M8339 main set.

ENGINE

VIN CYL

110 1819cc (1.8) Isuzu 4FB1 Diesel D

2.52/0.099

Bore x Stroke 84mm x 82mm

F780

F817

4B8340

8340 IH

Std. .25 .50 .75 1.0

8339 U/L

Std. .25 .50 .75 1.0

8339T IH

5M8339

1T8339 Std.

TORQUE SETTINGS

Connecting Rod 58-65 ft.lbs/79-88 Nm Main Bearing 116-130 ft.lbs/158-177 Nm

Rod

Main 1,2,4,5 3 3

48.924/1.9261 48.936/1.9266

51.972/2.0461 51.985/2.0466

1.509/0.0594 .015/.0006 .066/.0026

22.00/0.866

55.919/2.2015 55.932/2.2020 55.919/2.2015 55.932/2.2020 55.919/2.2015 55.932/2.2020

59.980/2.3614 60.000/2.3622 59.980/2.3614 60.000/2.3622 59.980/2.3614 60.000/2.3622

2.013/0.0793 .023/.0009 .081/.0032 2.013/0.0793 .023/.0009 .081/.0032 2.013/0.0793 .023/.0009 .081/.0032

21.75/0.856

F810

21.75/0.856

F810

21.75/0.856

F810

F817

Thrust - for 8/82-86 engines only. 63.750/2.5098 79.934/3.1470 2.36/0.093 3 64.000/2.5197 80.188/3.1570 Note: Thrust set includes two pieces, use on No. 3 position. Required with 5M1883 main set.

F780

1881 IH 1882A U/L 1882A U 1883A L 1824T IH

4B1881 Std. .25 .50 .75 1.0

5M1883 Std. .25 .50 .75 1.0

1T1824 Std.

CHEVROLET Engine Set No. Sizes Available

Type and Location

Housing Bore

Max. Bearing Thickness

Vertical Oil Clearance

Max. Overall Length

Material Code

Qty. Set

Bearing Shell No.

F817

3286T IH

(Contâ&#x20AC;&#x2122;d.) 1T3286 Std.

5C8083

Thrust - for 1981-7/82 engines only. 62.610/2.4650 79.950/3.1476 2.36/0.093 3 62.860/2.4748 80.200/3.1575 Note: Thrust set includes two pieces, use on No. 3 position. Required with 5M1883 main set. Cam 1-5

Std.

RB4072 Semi

Standard Shaft Size

29.975/1.1801 (Nominal)

31.025/1.2215 (Nominal)

Small End - single pieces. 25.000/0.9843 28.025/1.1033 (Nominal) (Nominal)

1.501/0.0591

16.00/0.630

F23

8083

1.529/0.0602

26.75/1.053

F100

RB4072

ENGINE

VIN CYL

Bore x Stroke

111 (1.8) Isuzu G180Z, OHC

84mm x 82mm

TORQUE SETTINGS Connecting Rod 33 ft.lbs/58 Nm 1976-82 engines only.

Connecting Rod 43 ft.lbs/58 Nm 1972-75 engines only.

Main Bearing 58-86 ft.lbs/79-116 Nm Main Bearing 72 ft.lbs/97 Nm Rod

4B2816

48.925/1.9262 48.940/1.9268

51.985/2.0466 52.000/2.0472

1.513/0.0596 .019/.0007 .075/.0030

22.09/0.870

F780

2816 IH

55.920/2.2016 55.935/2.2022 55.920/2.2016 55.935/2.2022

58.980/2.3220 59.000/2.3228 58.980/2.3220 59.000/2.3228

1.513/0.0596 .019/.0007 .080/.0031 1.513/0.0596 .019/.0007 .080/.0031

32.13/1.265

F780

21.08/0.830

F780

2817 IH 2818 IH

62.610/2.4650 79.950/3.1476 2.36/0.093 62.860/2.4748 80.200/3.1575 Note: Thrust set includes two pieces, use on No. 3 position. Required with 5M2817 main set.

F817

3286T IH

25.42/1.001

F23

6127

25.00/0.984

F23

AGB-14-1

Std. .25 .50 .75 1.0

5M2817

Main 1,3,5

Std. .25 .50 .75 1.0 2,4

1T3286 Std.

3C6127

Thrust 3

Cam 1,2,3

Std.

3C1190S

44.975/1.7707 (Nominal)

48.010/1.8902 48.030/1.8909

1.500/0.0591 .035/.0014 .095/.0037

AR Auxiliary - suits 1972-75 engines only. 47.993/1.8895 1.488/0.0586 1,2,3

Std.

ENGINE

VIN CYL

Bore x Stroke

112 (1.8) OHV

3.50 x 2.91

TORQUE SETTINGS Connecting Rod 34-43 ft.lbs/47-58 Nm Main Bearing 63-77 ft.lbs/85-105 Nm

Rod

4B745P

50.775/1.9990 50.800/2.0000

53.967/2.1247 53.980/2.1252

1.577/0.0621 .013/.0005 .077/.0030

21.38/0.842

F780

2370 IH

63.360/2.4945 63.383/2.4954

68.250/2.6870 68.273/2.6879

2.423/0.0954 .021/.0008 .093/.0037

18.72/0.737

F780

7123 IH

4 (Fl)

63.360/2.4945 63.383/2.4954

68.250/2.6870 68.273/2.6879

2.423/0.0954 .021/.0008 .093/.0037

23.93/0.942

F780

7162 IH

63.360/2.4945 63.383/2.4954

68.250/2.6870 68.273/2.6879

2.423/0.0954 .021/.0008 .093/.0037

20.95/0.825

F780

7125 U/L

47.440/1.8677 47.490/1.8697

51.283/2.0190 51.308/2.0200

1.880/0.0741

16.00/0.630

F23

CH-19-1

47.440/1.8677 47.490/1.8697 47.440/1.8677 47.490/1.8697

51.029/2.0090 51.079/2.0110 50.775/1.9990 50.825/2.0010

1.750/0.0691

16.00/0.630

F23

CH-18-4

1.630/0.0640

16.13/0.635

F23

CH-18-2

Std. 01 10 20 30 40

5M1524P

Main 1,2,3

Std. .25 .50 .75

5C1195S

Cam 1

Std. 2,5 3,4

CHEVROLET Type and Location

Standard Shaft Size

Max. Bearing Thickness

Housing Bore

Vertical Oil Clearance

Max. Overall Length

ENGINE

VIN CYL

Bore x Stroke

110 (1.8) Toyota 1ZZFE

79mm x 91.5mm

Material Code

Qty. Set

Bearing Shell No.

Engine Set No. Sizes Available

TORQUE SETTINGS

Connecting Rod 15 ft.lbs + 90 deg Main Bearing +45 deg, +45 deg Step 3 (12 point bolt) Main Bearing 14 ft.lbs 6 point bolt Main Bearing 16 ft.lbs Step 1 (12 point bolt) Main Bearing 32 ft.lbs Step 2 (12 point bolt)

Rod - High Strength Aluminum Silicon material. 43.993/1.7320 47.000/1.8504 1.496/0.0589 .020/.0008 44.000/1.7323 47.023/1.8513 .043/.0017

15.70/0.618

Main - High Strength Aluminum Silicon material. 47.986/1.8892 52.000/2.0472 2.007/0.0790 .015/.0006 1-5 48.001/1.8898 52.017/2.0479 .033/.0013

17.00/0.669

F810

1851

4B1851 Std. .25 .50 .75

F810

1853 U/L

5M1853 Std. .25 .50 .75

Thrust 53.600/2.1102 69.550/2.7382 53.850/2.1201 69.800/2.7480 (I.D.) (O.D.) Set includes two pieces. Required with 5M1853 main set.

2.48/0.098

ENGINE

VIN CYL

Bore x Stroke

119 (1.9) Isuzu G200Z, OHC

87mm x 82mm

F817

1853T IH

1T1853 Std.

TORQUE SETTINGS

Connecting Rod 43 ft.lbs/58 Nm Main Bearing 72 ft.lbs/97 Nm

Rod

Main 1,3,5 2,4

48.925/1.9262 48.940/1.9268

51.987/2.0467 52.000/2.0472

1.513/0.0596 .021/.0008 .076/.0030

22.00/0.866

55.920/2.2016 55.935/2.2022 55.920/2.2016 55.935/2.2022

58.980/2.3220 59.000/2.3228 58.980/2.3220 59.000/2.3228

1.513/0.0596 .019/.0007 .080/.0031 1.513/0.0596 .019/.0007 .080/.0031

32.13/1.265

F810

F780

21.08/0.830

F780

62.610/2.4650 79.950/3.1476 2.36/0.093 62.860/2.4748 80.200/3.1575 Note: Thrust set includes two pieces, use on No. 3 position. Required with 5M2817 main set.

F817

Thrust 3

ENGINE

VIN CYL

Bore x Stroke

122 (2.0) OHV 122 (2.0) OHV 122 (2.0) OHV 122 (2.0) OHV

1 B P Y

3.50 x 3.15 3.50 x 3.15 3.50 x 3.15 3.50 x 3.15

L4 L4 L4 L4

2821A IH 2817 IH 2818 IH 3286T IH

4B2821 Std. .25 .50 .75 1.0 1.25 1.50

5M2817 Std. .25 .50 .75 1.0

1T3286 Std.

TORQUE SETTINGS

Connecting Rod 34-43 ft.lbs/47-58 Nm Main Bearing 63-77 ft.lbs/85-105 Nm

Rod 50.775/1.9990 50.800/2.0000

53.967/2.1247 53.980/2.1252

1.577/0.0621 .013/.0005 .077/.0030

Main - 122 (2.0L) VIN B,P,Y engines only. 1,2,3 63.360/2.4945 68.250/2.6870 2.423/0.0954 63.383/2.4954 68.273/2.6880 4 (Fl) 63.360/2.4945 68.250/2.6870 2.423/0.0954 63.383/2.4954 68.273/2.6880 5 63.360/2.4945 68.250/2.6870 2.423/0.0954 63.383/2.4954 68.273/2.6880 Overflange length remains constant for standard and undersizes.

21.38/0.842

.021/.0008 .093/.0037 .021/.0008 .093/.0037 .021/.0008 .093/.0037

18.72/0.737

F780

23.93/0.942

F780

20.95/0.825

F780

2.423/0.0954 .021/.0008 .093/.0037

18.72/0.737

F780

63.360/2.4945 68.250/2.6870 2.423/0.0954 .021/.0008 63.383/2.4954 68.273/2.6880 .093/.0037 Overflange length remains constant for standard and undersizes.

23.93/0.942

Main - 122 (2.0L) VIN 1 engines only. 1,2,3,5 63.360/2.4945 68.250/2.6870 63.383/2.4954 68.273/2.6880 4 (Fl)

F780

2370 IH 7123 IH 7124 IH 7125 U/L

7123 IH 7124 IH

4B745P Std. 01 10 20 30 40

5M1567P Std. .25 .50 .75 1.0

5M7124P Std. .25 .50 .75 1.0

CHEVROLET Engine Set No. Sizes Available

Type and Location

Standard Shaft Size

Housing Bore

Max. Bearing Thickness

Vertical Oil Clearance

Max. Overall Length

Material Code

Qty. Set

Bearing Shell No.

12 (Contâ&#x20AC;&#x2122;d.)

5M7167P .25 .50 .75 1.0

Main - Alternate set to 5M1567P with +0.100 mm overflange length increase. * See below for dimensional information. 63.360/2.4945 68.250/2.6870 2.423/0.0954 .020/.0008 18.72/0.737 F780 6 7123 1,2,3 63.383/2.4954 68.273/2.6879 .093/.0037 IH 4 (Fl)

63.360/2.4945 63.383/2.4954

68.250/2.6870 68.273/2.6879

2.423/0.0954 .020/.0008 .093/.0037

24.03/0.946

F780

7167 IH

63.360/2.4945 68.250/2.6870 63.383/2.4954 68.273/2.6879 To be discontinued when stock exhausted.

2.423/0.0954 .020/.0008 .093/.0037

20.95/0.825

F780

7125 U/L

* DIMENSIONAL INFORMATION FOR 5M7167P Overall Width (Nominal) Increase in Width 0.25 mm u/s shaft 24.03 mm +0.100 mm 0.50 mm u/s shaft 24.03 mm +0.100 mm 0.75 mm u/s shaft 24.03 mm +0.100 mm 1.00 mm u/s shaft 24.03 mm +0.100 mm

5C1195S

Cam 1

Std. 2,5 3,4

47.440/1.8677 47.490/1.8697

51.283/2.0190 51.308/2.0200

1.880/0.0741

16.00/0.630

F23

CH-19-1

47.440/1.8677 47.490/1.8697 47.440/1.8677 47.490/1.8697

51.029/2.0090 51.079/2.0110 50.775/1.9990 50.825/2.0010

1.750/0.0691

16.00/0.630

F23

CH-18-4

1.630/0.0640

16.13/0.635

F23

CH-18-2

ENGINE

VIN CYL

Bore x Stroke

122 (2.0) DOHC 122 (2.0) DOHC 140 (2.3) SOHC 140 (2.3) SOHC

E O A B

3.50 x 3.16 3.50 x 3.16 3.50 x 3.63 3.50 x 3.63

L4 L4 L4 L4

TORQUE SETTINGS Connecting Rod 35 ft.lbs/48 Nm Main Bearing 65 ft.lbs/88 Nm

Rod

4B745P Std. 01 10 20 30 40

5M1050P

Main 1,2,3

Std. 10 20

50.775/1.9990 50.800/2.0000

53.967/2.1247 53.980/2.1252

1.577/0.0621 .013/.0005 .077/.0030

21.38/0.842

F780

2370 IH

58.377/2.2983 58.402/2.2993

63.261/2.4906 63.287/2.4916

2.426/0.0955 .015/.0006 .091/.0036

20.50/0.807

F780

MB3135P U/L

25.63/1.009

F780

22.88/0.901

F780

MB2588P U/L MB2589P U/L

4 (Fl)

58.377/2.2983 63.261/2.4906 2.426/0.0955 58.402/2.2993 63.287/2.4916 5 58.377/2.2983 63.261/2.4906 2.426/0.0955 58.402/2.2993 63.287/2.4916 Overflange length remains constant for standard and undersizes.

5C716S

Cam 1

Std. 2,3,4,5

.015/.0006 .091/.0036 .015/.0006 .091/.0036

57.942/2.2812 57.968/2.2822

61.265/2.4120 61.290/2.4130

1.633/0.0643

17.40/0.685

F23

CH-13-1

57.942/2.2812 57.968/2.2822

61.265/2.4120 61.290/2.4130

1.633/0.0643

17.40/0.685

F23

CH-13-2

ENGINE

VIN CYL

Bore x Stroke

122 (2.0) Suzuki J20A

84mm x 90mm

TORQUE SETTINGS Main Bearing 20 ft.lbs (10 mm bolt) Main Bearing 44 ft.lbs (8 mm bolt)

Rod

4B8306 Std. .25 .50 .75

5M8307

Main 1-5

Std. .25 .50 .75

49.982/1.9678 50.000/1.9685

53.000/2.0866 53.018/2.0873

1.490/0.0587 .020/.0008 .076/.0030

16.13/0.635

F780

8306 IH

57.982/2.2828 58.000/2.2835

62.000/2.4409 62.018/2.4416

2.003/0.0789

19.12/0.753

F780

8307 U/L

2.50/0.098

F817

8307T IH

Thrust

1T8307 Std.

71.500/2.8150 84.550/3.3287 (Nominal I.D.) (Nominal O.D.) Note: Set includes two pieces. Required with 5M8307 main set.

CHEVROLET Type and Location

Standard Shaft Size

Max. Bearing Thickness

Housing Bore

Vertical Oil Clearance

ENGINE

VIN CYL

Bore x Stroke

133 2180cc (2.2) OHV (LN2) 134 (2.2) OHV 134 (2.2) OHV 134 (2.2) OHV

4 4 5 G

3.50 x 3.46 3.50 x 3.46 3.50 x 3.46 3.50 x 3.46

L4 L4 L4 L4

Max. Overall Length

Material Code

Qty. Set

Bearing Shell No.

Engine Set No. Sizes Available

TORQUE SETTINGS

Connecting Rod 38 ft.lbs/51 Nm Main Bearing 70 ft.lbs/95 Nm

Rod 50.775/1.9990 50.800/2.0000

53.967/2.1247 53.980/2.1252

1.577/0.0621 .013/.0005 .077/.0030

21.38/0.842

F780

2370 IH

Main - for Cars (1990-96) & Trucks (1994-97). (This set contains shells that have the same tang location for positions #1,2,3 & 5) 1,2,3,5 63.360/2.4945 68.250/2.6870 2.423/0.0954 .021/.0008 18.72/0.737 F780 8 7123 63.383/2.4954 68.273/2.6880 .093/.0037 IH 4 (Fl) 63.360/2.4945 68.250/2.6870 2.423/0.0954 .021/.0008 23.93/0.942 F780 2 7124 63.383/2.4954 68.273/2.6880 .093/.0037 IH Overflange length remains constant for standard and undersizes. Main - for Cars (1997 on) & Trucks (1998 on). Different tang location for #3 position bearing. 1,2,5 63.358/2.4944 68.250/2.6870 2.423/0.0954 .021/.0008 18.72/0.737 F780 63.383/2.4954 68.275/2.6880 .097/.0038 3 63.358/2.4944 68.250/2.6870 2.423/0.0954 .021/.0008 20.75/0.817 F780 63.383/2.4954 68.275/2.6880 .097/.0038 4 (Fl) 63.358/2.4944 68.250/2.6870 2.423/0.0954 .021/.0008 23.93/0.942 F780 63.383/2.4954 68.275/2.6880 .097/.0038 Overflange length remains constant for standard and undersizes.

6 2 2

Main - Alt set to 5M7164P with +0.010" overflange length increase. * See dimensional information below. 63.358/2.4944 68.250/2.6870 2.548/0.1003 .021/.0008 18.72/0.737 F780 6 1,2,5 63.383/2.4954 68.275/2.6880 (@ 0.25 mm u/s) .097/.0038 3 63.358/2.4944 68.250/2.6870 2.548/0.1003 .021/.0008 20.75/0.817 F780 2 63.383/2.4954 68.275/2.6880 (@ 0.25 mm u/s) .097/.0038 4 (Fl) 63.358/2.4944 68.250/2.6870 2.548/0.1003 .021/.0008 24.18/0.952 F780 2 63.383/2.4954 68.275/2.6880 (@ 0.25 mm u/s) .097/.0038 Stock not available from fee warehouses.

7123 IH 7164 IH 7124 IH

7123 IH

4B745P Std. 01 10 20 30 40

5M7124P Std. .25 .50 .75 1.0

5M7164P Std. .25 .50 .75 1.0

5M7183P .25 .50 .75 1.0

7164 IH 7183 IH

* DIMENSIONAL INFORMATION FOR 5M7183P Overall Width (Nominal) Increase in Width 0.25 mm u/s shaft 0.952" +0.010" 0.50 mm u/s shaft 0.952" +0.010" 0.75 mm u/s shaft 0.952" +0.010" 1.00 mm u/s shaft 0.952" +0.010" Cam 1 2,5 3,4

47.440/1.8677 47.490/1.8697 47.440/1.8677 47.490/1.8697

51.283/2.0190 51.308/2.0200 51.029/2.0090 51.079/2.0110

47.440/1.8677 47.490/1.8697

50.775/1.9990 50.825/2.0010

1.880/0.0741

16.00/0.630

F23

CH-19-1

1.750/0.0691

16.00/0.630

F23

CH-18-4

1.630/0.0640

16.13/0.635

F23

CH-18-2

5C1195S Std.

ENGINE

VIN CYL

Bore x Stroke

134 (2.2) Isuzu C223 Diesel

88mm x 92mm

TORQUE SETTINGS

Rod - for 1981 - 10/83 engines only. 52.918/2.0834 55.980/2.2039 52.930/2.0839 56.000/2.2047

1.513/0.0596 .020/.0008 .079/.0031

22.50/0.886

Rod - for 11/83 - 1985 engines only. 52.918/2.0834 55.980/2.2039 52.930/2.0839 56.000/2.2047

1.508/0.0594 .034/.0013 .092/.0036

21.50/0.846

Connecting Rod 58-65 ft. lbs/79-88 Nm Main Bearing 116-130 ft.lbs/158-177 Nm

F780

4B1320

1320 IH

Std. .25 .50 .75 1.0

1830 IH

Std. .25 .50 .75

4B1830

CHEVROLET Engine Set No. Sizes Available

Type and Location

Standard Shaft Size

Housing Bore

Max. Bearing Thickness

Vertical Oil Clearance

Max. Overall Length

Material Code

Qty. Set

Bearing Shell No.

2.017/0.0794 .013/.0005 .074/.0029

27.65/1.089

F780

1188 IH

16 (Contâ&#x20AC;&#x2122;d.) 5M1188 Std. .25 .50 .75

5M1827 Std. .25 .50 .75

1T1192 Std.

3C8127

Main - for 1981 - 10/83 engines only. 59.920/2.3591 63.975/2.5187 1,5 59.932/2.3595 64.000/2.5197 2,4

59.920/2.3591 59.932/2.3595

63.975/2.5187 64.000/2.5197

2.017/0.0794 .013/.0005 .074/.0029

23.13/0.911

F780

1194 IH

59.920/2.3591 59.932/2.3595

63.975/2.5187 64.000/2.5197

2.017/0.0794 .013/.0005 .074/.0029

28.85/1.136

F780

1189 IH

Main - for 11/83 - 1985 engines only. 59.920/2.3591 63.975/2.5187 1,5 59.932/2.3595 64.000/2.5197

2.012/0.0792 .023/.0009 .084/.0033

27.65/1.089

F780

1827 U/L

2,4

59.920/2.3591 59.932/2.3595

63.975/2.5187 64.000/2.5197

2.012/0.0792 .023/.0009 .084/.0033

21.13/0.832

F780

1829 U/L

59.920/2.3591 59.932/2.3595

63.975/2.5187 64.000/2.5197

2.012/0.0792 .023/.0009 .084/.0033

28.85/1.136

F780

1828 U/L

72.260/2.8449 86.610/3.4098 2.49/0.098 72.520/2.8551 86.870/3.4201 Note: Thrust set includes two pieces, use on No. 3 position. Required with 5M1188/5M1827 main sets.

F817

1192T IH

Thrust 3

Cam 1

Std. 2 3

51.999/2.0472 52.034/2.0486

2.027/0.0798

22.23/0.875

F23

8127

47.940/1.8874 47.970/1.8886 47.940/1.8874 47.970/1.8886

51.999/2.0472 52.034/2.0486 51.999/2.0472 52.034/2.0486

2.027/0.0798

22.23/0.875

F23

8128

2.027/0.0798

22.23/0.875

F23

8129

ENGINE

VIN CYL

Bore x Stroke

134 (2.2) Ecotec 134 2198cc (2.2) Ecotec (L61)

6 F

86mm x 94.6mm 86mm x 94.6mm

4B2296A Std. .25 .50 .75

4B2296AO/S2 .25 .50 .75

5M2232A

Std.

Connecting Rod 18 ft.lbs + 100 deg Main Bearing 15 ft.lbs + 70 deg

20.30/0.799

F810

2296A IH

Rod - .002" oversize OD version of 4B2296A. 49.000/1.9291 52.169/2.0539 1.692/0.0666 .020/.0008 49.014/1.9297 52.185/2.0545 (@ 0.25mm u/size) .066/.0026

20.30/0.799

F810

9110A IH

Main 1,3,4,5

55.991/2.2044 56.007/2.2050

64.066/2.5223 64.081/2.5229

4.036/0.1589 .033/.0013 .078/.0031

19.79/0.779

F810

MB3824AL U/L

55.991/2.2044 56.007/2.2050

64.066/2.5223 64.081/2.5229

4.041/0.1591 .020/.0008 .063/.0025

25.88/1.019

F810

MB3825AL U/L

Balance Shaft - for engines 2002 on. Rear 36.720/1.4457 40.762/1.6048 36.741/1.4465 40.775/1.6053

2.004/0.0789 .027/.0011 .068/.0027

26.00/1.024

F820

SH2002

2 (Fl)

1BS2002S

L4 L4

TORQUE SETTINGS

Rod - High Strength Aluminum Silicon material. 49.000/1.9291 52.118/2.0519 1.542/0.0607 .020/.0008 49.014/1.9297 52.134/2.0525 .066/.0026

Std. 10 20

47.940/1.8874 47.970/1.8886

ENGINE

VIN CYL

Bore x Stroke

138 (2.3) DOHC (Olds - Quad 4) 140 (2.3) DOHC (Olds - Quad 4)

D A

3.62 x 3.35 3.62 x 3.35

L4 L4

TORQUE SETTINGS Connecting Rod 18 ft.lbs/25 Nm + 90 deg turn Main Bearing 15 ft.lbs/20 Nm + 90 deg turn

Rod

4B1388P Std. .25 .50 .75 1.0

5M8511P

Main 1,2,4,5

Std. .25 .50 .75 3 (Fl)

47.973/1.8887 47.998/1.8897

51.166/2.0144 51.191/2.0154

1.580/0.0623 .013/.0005 .051/.0020

22.76/0.896

F780

8516 IH

51.994/2.0470 52.019/2.0480

56.774/2.2352 56.799/2.2362

2.377/0.0936 .013/.0005 .051/.0020

21.26/0.837

F780

8511 U/L

51.994/2.0470 52.019/2.0480

56.774/2.2352 56.799/2.2362

2.377/0.0936 .013/.0005 .051/.0020

27.76/1.093

F780

8513 U/L

CHEVROLET Type and Location

Standard Shaft Size

Max. Bearing Thickness

Housing Bore

Vertical Oil Clearance

Max. Overall Length

Material Code

Qty. Set

Bearing Shell No.

Engine Set No. Sizes Available

(Contâ&#x20AC;&#x2122;d.) Main - Alt. set to 5M8511P with +0.004" overflange length increase. *See dimensional information below. 51.994/2.0470 56.774/2.2352 2.377/0.0936 .013/.0005 21.26/0.837 F780 8 1,2,4,5 52.019/2.0480 56.799/2.2362 .051/.0020 3 (Fl)

51.994/2.0470 56.774/2.2352 52.019/2.0480 56.799/2.2362 Stock not available from fee warehouses.

2.502/0.0985 .013/.0005 (@ 0.25 u/s) .077/.0030

27.86/1.097

F780

8511 U/L

5M8514P .25 .50 .75

8514 U/L

* DIMENSIONAL INFORMATION FOR 5M8514P Overall Width (Nominal) Increase in Width 0.25 mm u/s shaft 1.097" +0.004" 0.50 mm u/s shaft 1.097" +0.004" 0.75 mm u/s shaft 1.097" +0.004"

ENGINE

VIN CYL

Bore x Stroke

146 (2.4) DOHC (Olds - Quad 4)

3.543 x 3.700

TORQUE SETTINGS

Connecting Rod 18 ft.lbs/25 Nm + 90 deg turn Main Bearing 15 ft.lbs/20 Nm + 90 deg turn

Rod

Main 1,2,4,5 3 (Fl)

47.973/1.8887 47.998/1.8897

51.173/2.0147 51.186/2.0152

1.581/0.0622 .013/.0005 .077/.0030

18.30/0.720

60.000/2.3622 60.023/2.3631

64.778/2.5503 64.798/2.5511

2.376/0.0935 .003/.0001 .072/.0028

20.00/0.787

60.000/2.3622 60.023/2.3631

67.778/2.6684 64.798/2.5511

2.376/0.0935 .003/.0001 .072/.0028

27.74/1.092

F780

F780 F780

8 2

Main - Alt. set to 5M2056P with +0.25 mm overflange length increase. *See dimensional information below. 1,2,4,5 60.000/2.3622 64.778/2.5503 2.376/0.0935 .003/.0001 20.00/0.787 F780 8 60.023/2.3631 64.798/2.5511 .072/.0028 3 (Fl) 60.000/2.3622 64.778/2.5503 2.376/0.0935 .003/.0001 27.99/1.102 F780 2 60.023/2.3631 64.798/2.5511 .072/.0028

4B1647P

8520 IH

Std. .25 .50 .75 1.0

8517 U/L

Std. .25 .50 .75 1.0

5M2056P

8518 U/L 8517 U/L 8525 U/L

5M8525P .25 .50 .75 1.0

ENGINE

VIN CYL

Bore x Stroke

151 2474cc (2.5) Pontiac Eng. 151 2474cc (2.5) Pontiac Eng. 151 2474cc (2.5) Pontiac Eng. 151 2474cc (2.5) Pontiac Eng. 151 2474cc (2.5) Pontiac Eng. 151 2474cc (2.5) Pontiac Eng. 151 2474cc (2.5) Pontiac Eng. 151 2474cc (2.5) Pontiac Eng. 151 2474cc (2.5) Pontiac Eng.

1 2 5 9 A E F R V

4.00 x 3.00 4.00 x 3.00 4.00 x 3.00 4.00 x 3.00 4.00 x 3.00 4.00 x 3.00 4.00 x 3.00 4.00 x 3.00 4.00 x 3.00

L4 L4 L4 L4 L4 L4 L4 L4 L4

TORQUE SETTINGS

Connecting Rod 30 ft.lbs/41 Nm (except crossflow) Connecting Rod 32 ft.lbs/44 Nm (crossflow) Main Bearing 65 ft.lbs/88 Nm (except crossflow) Main Bearing 70 ft.lbs/95 Nm (crossflow)

Rod - High Strength Aluminum Silicon material. 50.800/2.0000 53.967/2.1247 1.570/0.0618 .014/.0006 50.813/2.0005 53.980/2.1252 .066/.0026

18.84/0.742

Rod - .002" oversize OD version of 4B610A. 50.800/2.0000 54.018/2.1267 1.722/0.0678 .015/.0006 50.813/2.0005 54.031/2.1272 (@ .010" u/size) .067/.0026

18.84/0.742

Rod - To be superceded by 4B610A when stock exhausted. 50.800/2.0000 53.967/2.1247 1.570/0.0618 .014/.0006 50.813/2.0005 53.980/2.1252 .066/.0026

18.84/0.742

F810

F780

Rod - .002" oversize OD version of 4B610P. To be superceded by 4B610AO/S2 when stock exhausted. 50.800/2.0000 54.018/2.1267 1.722/0.0678 .015/.0006 18.84/0.742 F780 8 50.813/2.0005 54.031/2.1272 (@ .010" u/s) .067/.0026

2226A IH 9070A IH 2226 IH 9070 IH

4B610A Std. 10 20 30 40

4B610AO/S2 10 20 30 40

4B610P Std. 01 10 20 30 40

4B610PO/S2 10 20 30 40

CHEVROLET Engine Set No. Sizes Available

Type and Location

Max. Overall Length

Material Code

Qty. Set

Bearing Shell No.

2.426/0.0955 .007/.0003 .084/.0033

20.49/0.807

F780

7132 U/L

58.377/2.2983 63.261/2.4906 2.426/0.0955 .007/.0003 58.402/2.2993 63.287/2.4916 .084/.0033 Overflange length remains constant for standard and undersizes.

25.63/1.009

F780

7133 U/L

Standard Shaft Size

Housing Bore

58.377/2.2983 58.402/2.2993

63.261/2.4906 63.287/2.4916

Max. Bearing Thickness

Vertical Oil Clearance

20 (Contâ&#x20AC;&#x2122;d.) 5M1733P

Main 1,2,3,4

Std. 01 10 20 30 40 5 (Fl)

5M7152P 10 20 30 40

58.377/2.2983 63.261/2.4906 58.402/2.2993 63.287/2.4916 Stock not available from fee warehouses.

.010" u/s shaft .020" u/s shaft .030" u/s shaft .040" u/s shaft

3C1030S

Cam 1,2,3

Std.

47.452/1.8682 47.478/1.8692

ENGINE

25.88/1.019

F780

7152 U/L

CH-5-3

* DIMENSIONAL INFORMATION FOR 5M7152P Overall Width (Nominal) Increase in Width 1.019" +0.010" 1.019" +0.010" 1.019" +0.010" 1.019" +0.010"

50.775/1.9990 50.825/2.0010

VIN CYL

153 (2.5) 153 (2.5) 153 (2.5) 153 (2.5)

2.426/0.0955 .007/.0003 .084/.0033

AA CA OH

L4 L4 L4 L4

1.640/0.0644

21.97/0.865

Bore x Stroke 3.88 x 3.25 3.88 x 3.25 3.88 x 3.25 3.88 x 3.25

F23

TORQUE SETTINGS Connecting Rod 30-35 ft.lbs/41-48 Nm Main Bearing 45-55 ft.lbs/61-75 Nm

Rod

4B745P

50.775/1.9990 50.800/2.0000

Std. 01 10 20 30 40

5M1733P Std. 01 10 20 30 40

5M7152P 10 20 30 40

53.967/2.1247 53.980/2.1252

Main 1,2,3,4

.007/.0003 .084/.0033 .007/.0003 .084/.0033

21.38/0.842

F780

2370 IH

20.49/0.807

F780

25.63/1.009

F780

7132 U/L 7133 U/L

58.377/2.2983 63.261/2.4906 58.402/2.2993 63.287/2.4916 Stock not available from fee warehouses.

.010" u/s shaft .020" u/s shaft .030" u/s shaft .040" u/s shaft

3C400S

1.577/0.0621 .013/.0005 .077/.0030

Cam 3

Std. 1,2

47.452/1.8682 47.478/1.8692 47.452/1.8682 47.478/1.8692

2.426/0.0955 .007/.0003 .084/.0033

25.88/1.019

F780

7152 U/L

* DIMENSIONAL INFORMATION FOR 5M7152P Overall Width (Nominal) Increase in Width 1.019" +0.010" 1.019" +0.010" 1.019" +0.010" 1.019" +0.010"

51.029/2.0090 51.079/2.0110 50.775/1.9990 50.825/2.0010

1.763/0.0694

21.97/0.865

F23

CH-5-2

1.636/0.0644

21.97/0.865

F23

CH-5-3

CHEVROLET Type and Location

Standard Shaft Size

ENGINE 169 2770cc (2.8) 169 2770cc (2.8)

Max. Bearing Thickness

Housing Bore

VIN CYL 8

L4 L4

Vertical Oil Clearance

Max. Overall Length

Bore x Stroke

Material Code

Qty. Set

Bearing Shell No.

TORQUE SETTINGS

93mm x 102mm 93mm x 102mm

Engine Set No. Sizes Available

Connecting Rod 18 ft.lbs + 110 deg Main Bearing 18 ft.lbs + 180 deg

Rod 56.691/2.2319 56.707/2.2326

60.322/2.3749 60.338/2.3755

1.802/0.0709 .011/.0004 .059/.0023

Rod - .002" oversize back version of 4B2290A. 56.691/2.2319 60.372/2.3768 1.952/0.0769 .011/.0004 56.707/2.2326 60.388/2.3775 (@ 0.25mm u/size) .059/.0023

ENGINE

VIN CYL

Bore x Stroke

173 (2.8) 173 (2.8) 173 (2.8) 173 (2.8) 173 (2.8) 173 (2.8) 173 (2.8) 173 (2.8)

1 7 B R S W X Z

3.50 x 2.99 3.50 x 2.99 3.50 x 2.99 3.50 x 2.99 3.50 x 2.99 3.50 x 2.99 3.50 x 2.99 3.50 x 2.99

V6 V6 V6 V6 V6 V6 V6 V6

20.75/0.817

F810

9102A IH

TORQUE SETTINGS

18.29/0.720

Rod - .002" oversize OD version of 6B1238A. 50.759/1.9984 53.962/2.1245 1.727/0.0680 .014/.0006 50.785/1.9994 53.988/2.1255 (@ .010" u/s) .080/.0031

18.29/0.720

F810

.25 .50 .75 1.0

7116A

F810

9036A IH 7117 U/L 7118 U/L 7129 U/L 7120 U/L

6B1238A

6B1238AO/S2 10 20 30 40

4M1493P 10 20 30 40

* DIMENSIONAL INFORMATION FOR 4M1493P Overall Width (Nominal) Increase in Width 0.952" +0.010" 0.952" +0.010" 0.952" +0.010" 0.952" +0.010"

Main - For 1980-85 engines with 63.3 mm small journal design. 63.340/2.4937 68.250/2.6870 2.426/0.0955 .035/.0014 1 63.363/2.4946 68.275/2.6880 .109/.0043

24.64/0.970

18.85/0.742

F780

7118 U/L

23.93/0.942

F780

31.70/1.248

F780

7119 U/L 7120 U/L

Main - for engines 1985 on with 67.2 mm large journal design. 1,4 67.239/2.6472 72.149/2.8405 2.426/0.0955 .033/.0013 67.264/2.6482 72.174/2.8415 .109/.0043

24.80/0.976

F810

18.75/0.738

F810

23.93/0.942

F810

68.250/2.6870 68.275/2.6880

4B2290AO/S2

Std. 01 10 20 30 40

Main - optional set to 4M1494P with +0.010" overflange increase. *See below for dimensional information. 63.340/2.4937 68.250/2.6870 2.426/0.0955 .035/.0014 24.64/0.970 F780 2 1 63.363/2.4946 68.275/2.6880 .109/.0043 2 63.340/2.4937 68.250/2.6870 2.426/0.0955 .035/.0014 18.85/0.742 F780 2 63.363/2.4946 68.275/2.6880 .109/.0043 3 (Fl) 63.340/2.4937 68.250/2.6870 2.426/0.0955 .035/.0014 24.18/0.952 F780 2 63.363/2.4946 68.275/2.6880 .109/.0043 4 63.340/2.4937 68.250/2.6870 2.426/0.0955 .035/.0014 31.70/1.248 F780 2 63.363/2.4946 68.275/2.6880 .109/.0043 Stock not available from fee warehouses.

63.340/2.4937 63.363/2.4946

4B2290A Std. .25 .50 .75

Connecting Rod 34-40 ft.lbs/47-54 Nm Main Bearing 63-74 ft.lbs/85-101 Nm

Rod - High Strength Aluminum Silicon material. 50.759/1.9984 54.013/2.1265 1.575/0.0620 .027/.0011 50.785/1.9994 54.039/2.1275 .105/.0041

.010" u/s shaft .020" u/s shaft .030" u/s shaft .040" u/s shaft

2290A IH

2.426/0.0955 .035/.0014 .109/.0043

3 (Fl)

67.239/2.6472 72.149/2.8405 2.426/0.0955 67.264/2.6482 72.174/2.8415 3 (Fl) 67.239/2.6472 72.149/2.8405 2.426/0.0955 67.264/2.6482 72.174/2.8415 Overflange length remains constant for standard and undersizes.

.035/.0014 .109/.0043 .035/.0014 .109/.0043

.033/.0013 .109/.0043 .033/.0013 .109/.0043

F780

7117 U/L

7237A U/L 7238A U/L 7239A U/L

4M1494P Std. 10 20 30 40

4M2037A Std. .25 .50 .75 1.0

CHEVROLET Engine Set No. Sizes Available

Type and Location

Standard Shaft Size

Housing Bore

Max. Bearing Thickness

Vertical Oil Clearance

Max. Overall Length

Material Code

Qty. Set

Bearing Shell No.

23 (Contâ&#x20AC;&#x2122;d.)

4M7122P .25 .50 .75 1.0

67.239/2.6472 67.264/2.6482

72.149/2.8405 72.174/2.8415

2.426/0.0955 .025/.0010 .102/.0040

18.75/0.738

F780

7238 U/L

67.239/2.6472 72.149/2.8405 67.264/2.6482 72.174/2.8415 To be discontinued when stock exhausted.

2.426/0.0955 .025/.0010 .102/.0040

24.18/0.952

F780

7122 U/L

3 (Fl)

4C1102S

Cam 1

47.440/1.8677 47.490/1.8697

51.029/2.0090 51.079/2.0110

1.760/0.0691

16.00/0.630

F23

CH-18-1A

47.440/1.8677 47.490/1.8697 47.440/1.8677 47.490/1.8697

50.775/1.9990 50.825/2.0010 51.029/2.0090 51.079/2.0110

1.630/0.0640

16.13/0.635

F23

CH-18-2

1.760/0.0691

16.00/0.630

F23

CH-18-4

Cam - optional set to 4C1102S with 0.725" wide #2 and #3 bushes. 47.440/1.8677 51.029/2.0090 1.760/0.0691 16.00/0.630 1 47.490/1.8697 51.079/2.0110

F23

CH-18-1A

2,3

47.440/1.8677 47.490/1.8697

50.775/1.9990 50.825/2.0010

1.630/0.0640

18.42/0.725

F23

CH-18-2A

47.440/1.8677 47.490/1.8697

51.029/2.0090 51.079/2.0110

1.760/0.0691

16.00/0.630

F23

CH-18-4

Std. 2,3 4

4C1102SW Std.

ENGINE

VIN CYL

Bore x Stroke

189 (3.1) 189 (3.1) 189 (3.1) 189 (3.1)

D J M T

3.50 x 3.31 3.50 x 3.31 3.50 x 3.31 3.50 x 3.31

6B1238A Std. 01 10 20 30 40

6B1238AO/S2 10 20 30 40

V6 V6 V6 V6

TORQUE SETTINGS Connecting Rod 15 ft.lbs + 75 deg (VIN M only) Connecting Rod 39 ft.lbs/53 Nm Main Bearing 37 ft.lbs + 77 deg (VIN M only) Main Bearing 70 ft.lbs/95 Nm

Rod - High Strength Aluminum Silicon material. 50.759/1.9984 54.013/2.1265 1.575/0.0620 .027/.0011 50.785/1.9994 54.039/2.1275 .105/.0041

18.29/0.720

F810

7116A

Rod - .002" oversize OD verison of 6B1238A. 50.759/1.9984 53.962/2.1245 1.727/0.0680 .014/.0006 50.785/1.9994 53.988/2.1255 (@ .010" u/s) .080/.0031

18.29/0.720

F810

9036A IH

24.80/0.976

F810

18.75/0.738

F810

23.93/0.942

F810

7237A U/L 7238A U/L 7239A U/L

Main - Exc. VIN M 1,4 67.239/2.6472 72.149/2.8405 2.426/0.0955 Std. .25 .50 .75 1.0 67.264/2.6482 72.174/2.8415 2 67.239/2.6472 72.149/2.8405 2.426/0.0955 67.264/2.6482 72.174/2.8415 3 (Fl) 67.239/2.6472 72.149/2.8405 2.426/0.0955 67.264/2.6482 72.174/2.8415 Overflange length remains constant for standard and undersizes.

4M2037A

.033/.0013 .109/.0043 .033/.0013 .109/.0043 .033/.0013 .109/.0043

CHEVROLET Type and Location

Standard Shaft Size

Max. Bearing Thickness

Housing Bore

Vertical Oil Clearance

Max. Overall Length

Material Code

Qty. Set

Bearing Shell No.

Engine Set No. Sizes Available

(Contâ&#x20AC;&#x2122;d.) Main - optional set to 4M2037P with +0.010" overflange length increase for undersizes. *See below for dimensional information. 67.239/2.6472 72.149/2.8405 2.426/0.0955 .025/.0010 24.80/0.976 F780 4 7237 1,4 67.264/2.6482 72.174/2.8415 .102/.0040 U/L 2

67.239/2.6472 67.264/2.6482

72.149/2.8405 72.174/2.8415

2.426/0.0955 .025/.0010 .102/.0040

18.75/0.738

F780

7238 U/L

67.239/2.6472 72.149/2.8405 67.264/2.6482 72.174/2.8415 To be discontinued when stock exhausted.

2.426/0.0955 .025/.0010 .102/.0040

24.18/0.952

F780

7122 U/L

3 (Fl)

4M7122P .25 .50 .75 1.0

* DIMENSIONAL INFORMATION FOR 4M7122P Overall Width (Nominal) Increase in Width 0.25 mm u/s shaft 0.952" +0.010" 0.50 mm u/s shaft 0.952" +0.010" 0.75 mm u/s shaft 0.952" +0.010" 1.00 mm u/s shaft 0.952" +0.010" Main - VIN M engines only. High Strength Aluminum Silicon material. 1,4 67.241/2.6473 72.149/2.8405 24.80/0.976 67.267/2.6483 72.174/2.8415

F810

2,3(L)

18.75/0.738

F810

23.93/0.942

F810

67.241/2.6473 72.149/2.8405 67.267/2.6483 72.174/2.8415 3 (Fl) 67.241/2.6473 72.149/2.8405 67.267/2.6483 72.174/2.8415 Overflange length remains constant for standard and undersizes. Cam 1

7187A U/L 7188A U/L 7189A U

47.440/1.8677 47.490/1.8697

51.029/2.0090 51.079/2.0110

1.760/0.0691

16.00/0.630

F23

CH-18-1A

47.440/1.8677 47.490/1.8697 47.440/1.8677 47.490/1.8697

50.775/1.9990 50.825/2.0010 51.029/2.0090 51.079/2.0110

1.630/0.0640

16.13/0.635

F23

CH-18-2

1.760/0.0691

16.00/0.630

F23

CH-18-4

Cam - optional set to 4C1102S with 0.725" wide #2 and #3 bushes. 47.440/1.8677 51.029/2.0090 1.760/0.0691 1 47.490/1.8697 51.079/2.0110

16.00/0.630

F23

CH-18-1A

2,3

47.440/1.8677 47.490/1.8697

50.775/1.9990 50.825/2.0010

1.630/0.0640

18.42/0.725

F23

CH-18-2A

47.440/1.8677 47.490/1.8697

51.029/2.0090 51.079/2.0110

1.760/0.0691

16.00/0.630

F23

CH-18-4

2,3 4

ENGINE 194 (3.2) 230 (3.8) 230 (3.8) 250 (4.1) 250 (4.1) 250 (4.1) 250 (4.1) 250 (4.1) 250 (4.1) 250 (4.1) 250 (4.1)

C D L N P Q S

4C1102S Std.

VIN CYL

4M7189A Std. .25 .50 .75 1.0

L6 L6 L6 L6 L6 L6 L6 L6 L6 L6 L6

4C1102SW Std.

Bore x Stroke 3.56 x 3.25 3.88 x 3.25 3.88 x 3.25 3.88 x 3.53 3.88 x 3.53 3.88 x 3.53 3.88 x 3.53 3.88 x 3.53 3.88 x 3.53 3.88 x 3.53 3.88 x 3.53

TORQUE SETTINGS

Connecting Rod 30-35 ft.lbs/41-48 Nm (194 engines only) Connecting Rod 35-45 ft.lbs/48-61 Nm (230,250 engines only)

Main Bearing 60-70 ft.lbs/81-95 Nm (all engines)

Rod 50.775/1.9990 50.800/2.0000

53.967/2.1247 53.980/2.1252

1.577/0.0621 .013/.0005 .077/.0030

21.38/0.842

58.377/2.2983 58.402/2.2993

63.261/2.4906 63.287/2.4916

2.426/0.0955 .007/.0003 .084/.0033

20.49/0.807

58.377/2.2983 63.261/2.4906 2.426/0.0955 .007/.0003 58.402/2.2993 63.287/2.4916 .084/.0033 Overflange length remains constant for standard and undersizes.

25.63/1.009

Main 1-6 7 (Fl)

F780

F780 F780

12 2

6B745P

2370 IH

Std. 01 10 20 30 40

7132 U/L

Std. 10 20 30 40

7133 U/L

7M617P

CHEVROLET Engine Set No. Sizes Available

Type and Location

Standard Shaft Size

Housing Bore

Max. Bearing Thickness

Vertical Oil Clearance

Max. Overall Length

Material Code

Qty. Set

Bearing Shell No.

25 (Contâ&#x20AC;&#x2122;d.) 4C399S Std.

4C718S Std.

Cam - engines from 1962-1970. 47.452/1.8682 51.029/2.0090 1,4 47.478/1.8692 51.079/2.0110

1.763/0.0694

21.97/0.865

F23

CH-5-2

2,3

1.636/0.0644

21.97/0.865

F23

CH-5-3

1.636/0.0644

21.97/0.865

F23

CH-5-3

47.452/1.8682 47.478/1.8692

50.775/1.9990 50.825/2.0010

Cam - engines from 1971-84. 1,2,3,4 47.452/1.8682 50.775/1.9990 47.478/1.8692 50.825/2.0010

ENGINE

VIN CYL

Bore x Stroke

196 (3.2) Buick Eng. 231 (3.8) Buick Eng. 231 (3.8) Buick Eng. Turbo 231 (3.8) Buick Eng.

C 2 3 A

3.50 x 3.40 3.80 x 3.40 3.80 x 3.40 3.80 x 3.40

6B1228P Std. 01 10 20 30 40

6B1228PO/S2 10 20 30 40

4M1688P 10 20 30

V6 V6 V6 V6

Rod - .660" wide bearing. 57.117/2.2487 60.295/2.3738 57.137/2.2495 60.312/2.3745

TORQUE SETTINGS Connecting Rod 40 ft.lbs/54 Nm Main Bearing 110 ft.lbs/150 Nm

1.572/0.0619 .014/.0006 .077/.0030

Rod - .002" oversize OD version of 6B1228P. 57.117/2.2487 60.346/2.3758 1.724/0.0679 .005/.0002 57.137/2.2495 60.363/2.3765 (@ .010" u/s) .078/.0031

16.76/0.660

F780

2360 IH

16.76/0.660

F780

9071 IH

68.250/2.6870 68.275/2.6880

2.365/0.0931 .020/.0008 .096/.0038

22.07/0.869

F780

9019 U

63.475/2.4990 68.250/2.6870 63.500/2.5000 68.275/2.6880 To be discontinued when stock exhausted.

2.365/0.0931 .020/.0008 .096/.0038

27.38/1.078

F780

9018 U/L

2 (Fl)

63.475/2.4990 63.500/2.5000

* DIMENSIONAL INFORMATION FOR 4M1688P Overall Width (Nominal) Increase in Width .010" u/s shaft 1.078" +0.020" .020" u/s shaft 1.078" +0.020" .030" u/s shaft 1.078" +0.020"

4M1690P 20 30

Main - alternate set to 4M960P with +0.040" overflange length increase. *See below for dimensional information. 63.475/2.4990 68.250/2.6870 2.365/0.0931 .020/.0008 22.07/0.869 F780 4 9015 1,3 63.500/2.5000 68.275/2.6880 .096/.0038 U/L 4 63.475/2.4990 68.250/2.6870 2.365/0.0931 .020/.0008 22.07/0.869 F780 1 9019 63.500/2.5000 68.275/2.6880 .096/.0038 U 4 63.475/2.4990 68.250/2.6870 2.365/0.0931 .020/.0008 22.07/0.869 F780 1 9016 63.500/2.5000 68.275/2.6880 .096/.0038 L 2 (Fl) 63.475/2.4990 68.250/2.6870 2.365/0.0931 .020/.0008 27.89/1.098 F780 2 9024 63.500/2.5000 68.275/2.6880 .096/.0038 U/L Stock not available from fee warehouses. * DIMENSIONAL INFORMATION FOR 4M1690P Overall Width (Nominal) Increase in Width .020" u/s shaft 1.098" +0.040" .030" u/s shaft 1.098" +0.040"

CHEVROLET Type and Location

Standard Shaft Size

Max. Bearing Thickness

Housing Bore

Vertical Oil Clearance

Max. Overall Length

Material Code

Qty. Set

Bearing Shell No.

Engine Set No. Sizes Available

(Contâ&#x20AC;&#x2122;d.) Main - alternate set to 4M960P with +0.010" overflange length increase. *See below for dimensional information. 63.475/2.4990 68.250/2.6870 2.365/0.0931 .020/.0008 22.07/0.869 F780 4 9015 1,3 63.500/2.5000 68.275/2.6880 .096/.0038 U/L 4

63.475/2.4990 63.500/2.5000

68.250/2.6870 68.275/2.6880

2.365/0.0931 .020/.0008 .096/.0038

22.07/0.869

F780

9016 L

63.475/2.4990 68.250/2.6870 63.500/2.5000 68.275/2.6880 2 (Fl) 63.475/2.4990 68.250/2.6870 63.500/2.5000 68.275/2.6880 To be discontinued when stock exhausted.

2.365/0.0931 .020/.0008 .096/.0038 2.365/0.0931 .020/.0008 .096/.0038

22.07/0.869

F780

27.13/1.068

F780

9019 U 9020 U/L

4M1747P 10 20 40

* DIMENSIONAL INFORMATION FOR 4M1747P Overall Width (Nominal) Increase in Width .010" u/s shaft 1.068" +0.010" .020" u/s shaft 1.068" +0.010" .040" u/s shaft 1.068" +0.010" Main - half groove, standard oil clearance. Set includes modified rear main bearing. 1,3 63.475/2.4990 68.250/2.6870 2.365/0.0931 .020/.0008 22.07/0.869 63.500/2.5000 68.275/2.6880 .096/.0038 4 63.475/2.4990 68.250/2.6870 2.365/0.0931 .020/.0008 22.07/0.869 63.500/2.5000 68.275/2.6880 .096/.0038 4 63.475/2.4990 68.250/2.6870 2.365/0.0931 .020/.0008 22.07/0.869 63.500/2.5000 68.275/2.6880 .096/.0038 63.475/2.4990 68.250/2.6870 2.365/0.0931 .020/.0008 63.500/2.5000 68.275/2.6880 .096/.0038 Overflange length remains constant for standard and undersizes.

F780

9015 U/L 9016 L 9019 U

2 (Fl)

26.87/1.058

F780

9017 U/L

Cam - grooved O/D on #1 bush - alt. set to 4C1031S. 45.339/1.7850 48.654/1.9155 1.630/0.0642 1 45.364/1.7860 48.705/1.9175

19.18/0.755

F23

B-11-1B

2,3,4

15.88/0.625

F23

B-9-2

19.18/0.755

F23

B-11-1

15.88/0.625

F23

B-9-2

Cam - 1985-87 engines with 2nd design 20 bolt oil pan. 45.339/1.7850 49.162/1.9355 1.890/0.0743 1,4 45.364/1.7860 49.213/1.9375

19.18/0.755

F23

B-13-1

2,3

15.88/0.625

F23

B-9-2

45.339/1.7850 45.364/1.7860

48.654/1.9155 48.705/1.9175

4C1031S Std.

4C1246S Std.

1.630/0.0642

ENGINE

VIN CYL

Bore x Stroke

200 (3.3) 229 (3.8) 229 (3.8)

M 9 K

3.50 x 3.48 3.74 x 3.48 3.74 x 3.48

V6 V6 V6

4C1031BS Std.

1.630/0.0642

Cam - 1975-1985 engines with 1st design 14 bolt oil pan. 1 45.339/1.7850 48.654/1.9155 1.630/0.0642 45.364/1.7860 48.705/1.9175 2,3,4 45.339/1.7850 48.654/1.9155 1.630/0.0642 45.364/1.7860 48.705/1.9175

45.339/1.7850 45.364/1.7860

4M960P Std. 01 10 20 30 40

TORQUE SETTINGS

Connecting Rod 45 ft.lbs/59 Nm Main Bearings 70 ft.lbs/95 Nm

Rod 53.315/2.0990 53.340/2.1000

56.507/2.2247 56.520/2.2252

1.575/0.0620 .017/.0007 .081/.0032

Main - High Strength Aluminum Silicon material. 1,2,3 62.189/2.4484 67.071/2.6406 2.426/0.0955 62.212/2.4493 67.094/2.6415 4 62.177/2.4479 67.071/2.6406 2.426/0.0955 62.200/2.4488 67.094/2.6415

18.11/0.713

F780

.007/.0003 .079/.0031 .020/.0008 .091/.0036

20.50/0.807 43.64/1.718

F810

2.426/0.0955 .007/.0003 .079/.0031

20.50/0.807

F780

62.177/2.4479 67.071/2.6406 2.426/0.0955 .020/.0008 62.200/2.4488 67.094/2.6415 .091/.0036 Overflange length remains constant for standard and undersizes.

43.64/1.718

Main 1,2,3

62.189/2.4484 62.212/2.4493

67.071/2.6406 67.094/2.6415

4 (Fl)

F810

F780

7110 IH 2377A U/L 2378A U/L 2377 U/L 2378 U/L

6B1227P Std. 10 20 30 40

4M1454A Std. 01 10 20 30 40

4M1454P Std. 01 10 20 30 40

CHEVROLET Engine Set No. Sizes Available

Type and Location

Standard Shaft Size

Housing Bore

Max. Bearing Thickness

Vertical Oil Clearance

Max. Overall Length

Material Code

Qty. Set

Bearing Shell No.

27 (Cont’d.) 4M1628P 10 20 30 40

Main - alternate set to 4M1454P with +0.020" overflange length increase. *See below for dimensional information. 62.189/2.4484 67.071/2.6406 2.426/0.0955 .007/.0003 20.50/0.807 F780 6 2377 1,2,3 62.212/2.4493 67.094/2.6415 .079/.0031 U/L 4 (Fl)

62.177/2.4479 67.071/2.6406 62.200/2.4488 67.094/2.6415 To be discontinued when stock exhausted.

.010" u/s shaft .020" u/s shaft .030" u/s shaft .040" u/s shaft

4M1684P 20 30 40

2.426/0.0955 .020/.0008 .091/.0036

44.15/1.738

F780

2379 U/L

* DIMENSIONAL INFORMATION FOR 4M1628P Overall Width (Nominal) Increase in Width 1.738" +0.020" 1.738" +0.020" 1.738" +0.020" 1.738" +0.020"

Main - alternate set to 4M1454P with +0.040" overflange length increase. *See below for dimensional information. 62.189/2.4484 67.071/2.6406 2.426/0.0955 .007/.0003 20.50/0.807 F780 6 2377 1,2,3 62.212/2.4493 67.094/2.6415 .079/.0031 U/L 4 (Fl)

62.177/2.4479 67.071/2.6406 62.200/2.4488 67.094/2.6415 Stock not available from fee warehouses.

2.426/0.0955 .020/.0008 .091/.0036

44.65/1.758

F780

2355 U/L

* DIMENSIONAL INFORMATION FOR 4M1684P Overall Width (Nominal) Increase in Width .020" u/s shaft 1.758" +0.040" .030" u/s shaft 1.758" +0.040" .040" u/s shaft 1.758" +0.040"

4C1089S

Cam 1

Std. 2,4 3

47.452/1.8682 47.478/1.8692

51.283/2.0190 51.333/2.0210

1.890/0.0744

18.92/0.745

F23

CH-4-1

47.452/1.8682 47.478/1.8692 47.452/1.8682 47.478/1.8692

51.029/2.0090 51.079/2.0110 50.775/1.9990 50.825/2.0010

1.763/0.0694

18.92/0.745

F23

CH-4-2

1.640/0.0646

18.92/0.745

F23

CH-4-3

ENGINE

VIN CYL

Bore x Stroke

207 (3.4) OHV 207 (3.4) OHV 207 (3.4) DOHC

E S X

3.62 x 3.31 3.62 x 3.31 3.62 x 3.31

V6 V6 V6

TORQUE SETTINGS Connecting Rod 15 ft.lbs + 75 deg (1995-on engines, exc. ’95 VIN S)

Connecting Rod 39 ft.lbs/53 Nm (1991-94 engines & ’95 VIN S)

Main Bearing 37 ft.lbs + 75 deg (Bolt) Main Bearing 39 ft.lbs/53 Nm (Nut) Rod

6B1238A

50.759/1.9984 50.785/1.9994

Std. 01 10 20 30 40

6B1238AO/S2 10 20 30 40

4M2037A Std. .25 .50 .75 1.0

4C1102S Std.

54.013/2.1265 54.039/2.1275

1.575/0.0620 .027/.0011 .105/.0041

Rod - .002" oversize OD version of 6B1238A. 50.759/1.9984 53.962/2.1245 1.727/0.0680 .014/.0006 50.785/1.9994 53.988/2.1255 (@ .010" u/s) .080/.0031 Main 1,4

67.239/2.6472 72.149/2.8405 2.426/0.0955 67.264/2.6482 72.174/2.8415 2 67.239/2.6472 72.149/2.8405 2.426/0.0955 67.264/2.6482 72.174/2.8415 3 (Fl) 67.239/2.6472 72.149/2.8405 2.426/0.0955 67.264/2.6482 72.174/2.8415 Overflange length remains constant for standard and undersizes.

.033/.0013 .109/.0043 .033/.0013 .109/.0043 .033/.0013 .109/.0043

18.29/0.720

F810

7116A

18.29/0.720

F810

9036A IH

24.80/0.976

F810

18.75/0.738

F810

23.93/0.942

F810

7237A U/L 7238A U/L 7239A U/L

Cam - OHV engines only. 47.440/1.8677 51.029/2.0090 1 47.490/1.8697 51.079/2.0110

1.760/0.0691

16.00/0.630

F23

CH-18-1A

2,3

1.630/0.0640

16.13/0.635

F23

CH-18-2

1.760/0.0691

16.00/0.630

F23

CH-18-4

47.440/1.8677 47.490/1.8697 47.440/1.8677 47.490/1.8697

50.775/1.9990 50.825/2.0010 51.029/2.0090 51.079/2.0110

CHEVROLET Type and Location

Standard Shaft Size

Max. Bearing Thickness

Housing Bore

Vertical Oil Clearance

Max. Overall Length

Material Code

Qty. Set

Bearing Shell No.

Engine Set No. Sizes Available

(Contâ&#x20AC;&#x2122;d.) Cam - OHV engines only. Optional set to 4C1102S with 0.725" wide #2 and #3 bushes. 47.440/1.8677 51.029/2.0090 1.760/0.0691 16.00/0.630 F23 1 47.490/1.8697 51.079/2.0110

CH-18-1A

2,3

47.440/1.8677 47.490/1.8697

50.775/1.9990 50.825/2.0010

1.630/0.0640

18.42/0.725

F23

CH-18-2A

47.440/1.8677 47.490/1.8697

51.029/2.0090 51.079/2.0110

1.760/0.0691

16.00/0.630

F23

CH-18-4

CHG-22-1

47.440/1.8677 47.490/1.8697

50.787/1.9995

1.626/0.0640

16.00/0.630

F23

CH-18-2

47.440/1.8677 47.490/1.8697

51.041/2.0095

1.755/0.0691

15.87/0.625

F23

CH-18-4

211 3460cc (3.5) 211 3460cc (3.5)

L5 L5

Bore x Stroke

4C6001S Std.

2,3

VIN CYL

4C1102SW Std.

AR Auxiliary - DOHC engines only (casting # 10127450). Aux shaft with wide #1 position bearing. 47.440/1.8677 51.054/2.0100 1.755/0.0691 29.77/1.172 F23 1 1 47.490/1.8697

ENGINE

TORQUE SETTINGS

93mm x 102mm 93mm x 102mm

Connecting Rod 18 ft.lbs + 110 deg Main Bearing 18 ft.lbs + 180 deg

Rod 56.694/2.2320 56.707/2.2326

60.322/2.3749 60.338/2.3755

1.802/0.0709 .011/.0004 .059/.0023

Rod - .002" oversize back version of 5B2290A. 56.691/2.2319 60.372/2.3768 1.952/0.0769 .011/.0004 56.707/2.2326 60.388/2.3775 (@ 0.25mm u/size) .059/.0023

ENGINE

VIN CYL

216 (3.5) 235 (3.9) 261 (4.3)

L6 L6 L6

Bore x Stroke

231 (3.8) Buick Eng. Supercharged 1 231 (3.8) Buick Eng. K 231 (3.8) Buick Eng. L

V6 V6 V6

F810

2290A IH 9102A IH

5B2290A Std. .25 .50 .75

5B2290AO/S2 .25 .50 .75 1.0

TORQUE SETTINGS

28.70/1.130

F23

CH-2-1

23.95/0.943

F23

CH-2-2

23.95/0.943

F23

CH-2-3

23.95/0.943

F23

CH-2-4

28.70/1.130

F23

CH-3-1

23.94/0.942

F23

CH-3-2

23.94/0.942

F23

CH-3-3

23.94/0.942

F23

CH-3-4

4C209S Std.

Cam - for 1954-62 engines with large journals only. 1 54.704/2.1537 58.013/2.2840 1.630/0.0642 54.730/2.1547 58.064/2.2860 2 53.116/2.0912 56.426/2.2215 1.630/0.0642 53.142/2.0922 56.476/2.2235 3 51.530/2.0287 54.838/2.1590 1.630/0.0642 51.554/2.0297 54.889/2.1610 4 49.941/1.9662 53.263/2.0970 1.630/0.0642 49.966/1.9672 53.289/2.0980

VIN CYL

20.75/0.817

F810

3.50 x 3.75 3.56 x 3.94 3.75 x 3.94

Cam - for 1937-54 engines with small journals only. 1 51.516/2.0282 54.836/2.1589 1.636/0.0644 51.542/2.0292 54.633/2.1609 2 49.929/1.9657 53.251/2.0965 1.636/0.0644 49.954/1.9667 53.302/2.0985 3 48.341/1.9032 51.664/2.0340 1.636/0.0644 48.368/1.9042 51.714/2.0360 4 46.754/1.8407 50.076/1.9715 1.636/0.0644 46.779/1.8417 50.127/1.9735

ENGINE

20.75/0.817

4C383S Std.

Bore x Stroke 3.80 x 3.40 3.80 x 3.40 3.80 x 3.40

TORQUE SETTINGS

Connecting Rod 20 ft.lbs + 50deg/27 Nm + 50deg Main Bearing 26 ft.lbs + 50deg / 35 Nm +50deg

Rod 57.117/2.2487 57.137/2.2495

60.300/2.3740 60.312/2.3745

1.570/0.0618 .023/.0009 .081/.0032

Rod - .002" Oversize OD version of 6B1443P. 57.117/2.2487 60.351/2.3760 1.722/0.0678 .024/.0009 57.137/2.2495 60.363/2.3765 (@ .010" u/s) .082/.0032

18.30/0.720

F780

2306 IH 9046 IH

6B1443P Std. 10 20 30 40

6B1443PO/S2 10 20 30 40

CHEVROLET Engine Set No. Sizes Available

Type and Location

Standard Shaft Size

Housing Bore

Max. Bearing Thickness

Vertical Oil Clearance

Max. Overall Length

Material Code

Qty. Set

Bearing Shell No.

F780

2302 L

22.07/0.869

F780

2302 U

26.87/1.058

F780

22.07/0.869

F780

2303 U/L 2305 L

22.07/0.869

F780

2302 L

22.07/0.869

F780

26.87/1.058

F780

22.07/0.869

F780

2302 U 2303 U/L 2309 L

22.07/0.869

F780

2299 L

22.07/0.869

F780

26.87/1.058

F780

22.07/0.869

F780

2302 U 2303 U/L 2309 L

31 (Contâ&#x20AC;&#x2122;d.) Main - half groove, standard oil clearance for 1992-93 Type L engines. 63.470/2.4988 68.250/2.6870 2.377/0.0936 .013/.0005 22.07/0.869 1,3 Std. 10 20 30 40 63.495/2.4998 68.275/2.6880 .081/.0032

4M1822P

1,3,4

63.470/2.4988 63.495/2.4998

68.250/2.6870 68.275/2.6880

2.377/0.0936 .013/.0005 .081/.0032

2 (Fl)

63.470/2.4988 68.250/2.6870 2.377/0.0936 63.495/2.4998 68.275/2.6880 4 63.470/2.4988 68.250/2.6870 2.377/0.0936 63.495/2.4998 68.275/2.6880 Overflange length remains constant for standard and undersizes. Main - for 1994 Type L engines only. 63.470/2.4988 68.250/2.6870 1,3 Std. 10 20 30 40 63.495/2.4998 68.275/2.6880

4M2021P

.013/.0005 .081/.0032 .013/.0005 .081/.0032

2.377/0.0936 .013/.0005 .081/.0032

1,3,4

.013/.0005 .081/.0032 .013/.0005 .081/.0032 .013/.0005 .081/.0032

Main - for 1995 on Type L & K engines. 63.470/2.4988 68.250/2.6870 2.377/0.0936 .013/.0005 1,3 Std. 10 20 30 40 63.495/2.4998 68.275/2.6880 .081/.0032

4M2022P

1,3,4

4M9022P 10 20 30 40

.010" u/s shaft .020" u/s shaft .030" u/s shaft .040" u/s shaft

4C1246S Std.

4C1812S Std.

.013/.0005 .081/.0032 .013/.0005 .081/.0032 .013/.0005 .081/.0032

* DIMENSIONAL INFORMATION FOR 4M9022P Overall Width (Nominal) Increase in Width 1.068" +0.010" 1.068" +0.010" 1.068" +0.010" 1.068" +0.010"

Cam - for all engines 1992-95. 45.339/1.7850 49.162/1.9355 1,4 45.364/1.7860 49.213/1.9375

1.890/0.0743

19.18/0.755

F23

B-13-1

2,3

1.630/0.0642

15.88/0.625

F23

B-9-2

Cam - for engines 1996 on (Full round design). 46.858/1.8448 50.686/1.9955 1.882/0.0741 1,4 46.893/1.8462 50.711/1.9965

18.92/0.745

F23

B-14-1

2,3

16.00/0.630

F23

B-14-2

45.339/1.7850 45.364/1.7860

46.858/1.8448 46.893/1.8462

48.654/1.9155 48.705/1.9175

50.178/1.9755 50.228/1.9775

1.628/0.0641

CHEVROLET Type and Location

Standard Shaft Size

Max. Bearing Thickness

Housing Bore

Vertical Oil Clearance

Max. Overall Length

Material Code

Qty. Set

Bearing Shell No.

Engine Set No. Sizes Available

(Contâ&#x20AC;&#x2122;d.) Cam - for engines 1996 on (OE split type design). 46.858/1.8448 50.686/1.9955 1.870/0.0736 .053/.0021 1,4 46.893/1.8462 50.737/1.9975 .165/.0065

19.00/0.748

F250

5108

2,3

15.75/0.620

F250

5109

Cam Tower - Repair Insert for 1992-94 engines. 2,3 45.339/1.7850 49.836/1.9620 2.230/0.0878 .012/.0005 45.364/1.7860 49.861/1.9630 .088/.0035

15.75/0.620

F250

19549

Cam Tower - Repair Insert for 1992-94 engines. 45.339/1.7850 49.836/1.9620 2.230/0.0878 .012/.0005 1,4 54.364/2.1403 49.861/1.9630 .088/.0035

19.00/0.748

Cam Tower - Repair Insert for 1995 on engines. 46.858/1.8448 51.283/2.0190 2.179/0.0858 .032/.0013 1,4 46.893/1.8462 51.308/2.0200 .118/.0046

19.00/0.748

Cam Tower - Repair Insert for 1995 on engines. 46.858/1.8448 51.283/2.0190 2.176/0.0857 .038/.0015 2,3 46.893/1.8462 51.308/2.0200 .124/.0049

15.75/0.620

46.858/1.8448 46.893/1.8462

50.178/1.9755 50.229/1.9775

1.613/0.0635 .059/.0023 .171/.0067

Small End - for engines 1995 on (Exc. supercharged engines). 21.995/0.8659 24.562/0.9670 1.500/0.0591 .007/.0003 22.000/0.8661 (Nominal) .022/.0009 Bore allowance on the ID. Small End - for engines 1995 on (Exc. supercharged engines). 21.995/0.8659 24.562/0.9670 1.360/0.0535 22.000/0.8661 (Nominal) Ream allowance on the ID.

1SC19549 Std. 10

F250

19580

1SC19580 Std. 10

F250

19581

1SC19581 Std. 10

F250

19582

1SC19582 Std. 10

21.20/0.835

F100

RB4106

RB4106 Semi

21.20/0.835

F100

RB4106-R

RB4106-R Ream

VIN CYL

Bore x Stroke

256 (4.2)

93mm x 102mm

TORQUE SETTINGS

Connecting Rod 18 ft.lbs + 110 deg Main Bearing 18 ft.lbs + 180 deg

Rod - High Strength Aluminum Silicon material. 56.691/2.2319 60.322/2.3749 1.798/0.0708 .011/.0004 56.707/2.2326 60.338/2.3755 .059/.0023

20.75/0.817

Rod - .002" oversize OD version of 6B2290A. 56.691/2.2319 60.372/2.3768 1.952/0.0769 .011/.0004 56.707/2.2326 60.388/2.3775 (@ .25mm u/s) .059/.0023

20.75/0.817

Main 1,2,3,4,6, 7 5 (Fl)

4C5108 Std. 10

ENGINE

F810

F820

2290A IH 9102A IH

69.967/2.7546 69.982/2.7552

78.069/3.0736 78.087/3.0743

4.044/0.1592 .007/.0003 .050/.0020

20.68/0.814

MB3781P U/L

69.967/2.7546 69.982/2.7552

78.069/3.0736 78.087/3.0743

4.044/0.1592 .007/.0003 .050/.0020

25.35/0.998

F820

MB3782P U/L

22.997/0.9054 23.000/0.9055

25.857/1.0180

1.372/0.0540

23.75/0.935

F100

223-3664

6B2290A Std. .25 .50 .75 1.0

6B2290AO/S2 .25 .50 .75 1.0

7M2224A Std. 10 20

Small End

AB3664 Semi

ENGINE

VIN CYL

Bore x Stroke

260 (4.3) Oldsmobile Eng Diesel 260 (4.3) Oldsmobile Eng Diesel

T V

4.057 x 3.585 4.057 x 3.585

V6 V6

TORQUE SETTINGS

Connecting Rod 42 ft.lbs/57 Nm Main Bearing 107 ft.lbs/146 Nm (1982 engines) Main Bearing 89 ft.lbs/121 Nm (1983-85 engines)

Rod 57.125/2.2490 57.150/2.2500

60.305/2.3742 60.325/2.3750

1.570/0.0618 .013/.0005 .064/.0025

22.23/0.875

F780

CB1366P IH

6B8510P Std. 10 20 30

CHEVROLET Engine Set No. Sizes Available

Type and Location

Standard Shaft Size

Housing Bore

76.182/2.9993 76.208/3.0003

80.975/3.1880 81.001/3.1890

76.182/2.9993 76.208/3.0003

80.975/3.1880 81.001/3.1890

Max. Bearing Thickness

Vertical Oil Clearance

Max. Overall Length

Material Code

Qty. Set

Bearing Shell No.

2.380/0.0936 .020/.0008 .097/.0038

24.89/0.980

F780

MB2362P U/L

2.380/0.0936 .020/.0008 .097/.0038

24.87/0.979

F780

MB2163P IH

30.35/1.195

F780

32.26/1.270

F780

MB2363P IH MB2964P U/L

33 (Contâ&#x20AC;&#x2122;d.) 4M1616P

Main 1

Std. 10 2 3 (Fl)

4C1247S

Cam 1

Std. 2 3 4

.020/.0008 .097/.0038 .046/.0018 .086/.0034

51.707/2.0357 51.727/2.0365

55.062/2.1678 55.113/2.1698

1.640/0.0646

17.60/0.693

F23

O-7-1

51.199/2.0157 51.219/2.0165 50.691/1.9957 50.711/1.9965 50.183/1.9757 50.203/1.9765

54.554/2.1478 54.605/2.1498 54.046/2.1278 54.097/2.1298 53.538/2.1078 53.589/2.1098

1.640/0.0646

17.60/0.693

F23

O-6-2

1.640/0.0646

17.60/0.693

F23

O-6-3

1.640/0.0646

17.60/0.693

F23

O-6-4

ENGINE

VIN CYL

Bore x Stroke

262 (4.3) (incl. H.O. & Turbo) 262 (4.3) (incl. H.O. & Turbo) 262 (4.3) (incl. H.O. & Turbo) 262 (4.3) (incl. H.O. & Turbo) 262 (4.3) (incl. H.O. & Turbo)

B N W X Z

4.000 x 3.484 4.000 x 3.484 4.000 x 3.484 4.000 x 3.484 4.000 x 3.484

6B1358A Std. 01 10 20 30 40

6B1358AO/S2 10 20 30 40

V6 V6 V6 V6 V6

TORQUE SETTINGS Connecting Rod 45 ft.lbs/61 Nm Main Bearing 70 ft.lbs/95 Nm

Rod - High Strength Aluminum Silicon material. 57.130/2.2492 60.317/2.3747 1.575/0.0620 .022/.0009 57.145/2.2498 60.342/2.3757 .089/.0035

18.92/0.745

F810

7111A

Rod - .002" oversize OD version of 6B1358A. 57.130/2.2492 60.368/2.3767 1.613/0.0635 .022/.0009 57.145/2.2498 60.393/2.3777 (@ .010" u/s) .089/.0035

18.92/0.745

F810

9042A IH

18.92/0.745

F780

7111 IH

.007/.0003 .079/.0031 .020/.0008 .091/.0036

20.50/0.807

F810

43.64/1.718

F810

2377A U/L 2378A U/L

.007/.0003 .079/.0031 .020/.0008 .091/.0036

20.50/0.807

F780

43.64/1.718

F780

Rod

6B1358P

57.130/2.2492 57.145/2.2498

Std. 01 10 20 30 40 50 60

60.317/2.3747 60.342/2.3757

1.575/0.0620 .022/.0009 .089/.0035

Main - High Strength Aluminum Silicon material. 1,2,3 62.189/2.4484 67.071/2.6406 2.426/0.0955 Std. 01 10 20 30 40 62.212/2.4493 67.094/2.6415 4 62.177/2.4479 67.071/2.6406 2.426/0.0955 62.200/2.4488 67.094/2.6415

4M1454A

4M1454P Std. 01 10 20 30 40

4M1628P 10 20 30 40

Main 1,2,3

62.189/2.4484 67.071/2.6406 2.426/0.0955 62.212/2.4493 67.094/2.6415 4 (Fl) 62.177/2.4479 67.071/2.6406 2.426/0.0955 62.200/2.4488 67.094/2.6415 Overflange length remains constant for standard and undersizes.

2377 U/L 2378 U/L

Main - optional set to 4M1454P with +0.020" overflange length increase. *See dimensional information below. 1,2,3 62.189/2.4484 67.071/2.6406 2.426/0.0955 .007/.0003 20.50/0.807 F780 6 2377 62.212/2.4493 67.094/2.6415 .079/.0031 U/L 4 (Fl) 62.177/2.4479 67.071/2.6406 2.426/0.0955 .020/.0008 44.15/1.738 F780 2 2379 62.200/2.4488 67.094/2.6415 .091/.0036 U/L To be discontinued when stock exhausted.

.010" u/s shaft .020" u/s shaft .030" u/s shaft .040" u/s shaft

* DIMENSIONAL INFORMATION FOR 4M1628P Overall Width (Nominal) Increase in Width 1.738" +0.020" 1.738" +0.020" 1.738" +0.020" 1.738" +0.020"

CHEVROLET Type and Location

Standard Shaft Size

Housing Bore

Max. Bearing Thickness

Vertical Oil Clearance

Max. Overall Length

Material Code

Qty. Set

Bearing Shell No.

Engine Set No. Sizes Available

(Contâ&#x20AC;&#x2122;d.) Main - optional set to 4M1454P with +0.040" overflange length increase. *See dimensional information below. 62.189/2.4484 67.071/2.6406 2.426/0.0955 .007/.0003 20.50/0.807 F780 6 2377 1,2,3 62.212/2.4493 67.094/2.6415 .079/.0031 U/L 4 (Fl)

62.177/2.4479 67.071/2.6406 62.200/2.4488 67.094/2.6415 Stock not available from fee warehouses.

2.426/0.0955 .020/.0008 .091/.0036

44.65/1.758

F780

4M1684P 20 30 40

2355 U/L

* DIMENSIONAL INFORMATION FOR 4M1684P Overall Width (Nominal) Increase in Width .020" u/s shaft 1.758" +0.040" .030" u/s shaft 1.758" +0.040" .040" u/s shaft 1.758" +0.040" Cam - for 1985-05 engines without ID number "T" on front of block. 1 47.452/1.8682 51.283/2.0190 1.890/0.0744 47.478/1.8692 51.333/2.0210 2,4 47.452/1.8682 51.029/2.0090 1.763/0.0694 47.478/1.8692 51.079/2.0110 3 47.452/1.8682 50.775/1.9990 1.640/0.0646 47.478/1.8692 50.825/2.0010

18.92/0.745

F23

CH-4-1

18.92/0.745

F23

CH-4-2

18.92/0.745

F23

CH-4-3

Cam - for 1992-05 engines with ID number "T" on front of block. 1,4 47.452/1.8682 51.283/2.0190 1.890/0.0744 47.478/1.8692 51.333/2.0210

19.05/0.750

F23

CH-4-1

1.640/0.0646

19.05/0.750

F23

CH-4-3

1.763/0.0694

19.05/0.750

F23

CH-4-2

21.21/0.835

F23

CHG-15A

47.452/1.8682 47.478/1.8692 47.452/1.8682 47.478/1.8692

50.775/1.9990 50.825/2.0010 51.029/2.0090 51.079/2.0110

4C1089S Std.

4C1351S Std.

Balance Shaft - 1992-05. Excludes engines with Roller Bearings. 38.064/1.4986 47.587/1.8735 4.724/0.1860 .013/.0005 Rear 38.100/1.5000 47.612/1.8745 .050/.0020

1BS1400S Std.

CHEVROLET Engine Set No. Sizes Available

Type and Location

Standard Shaft Size

Housing Bore

Max. Bearing Thickness

Vertical Oil Clearance

ENGINE

VIN CYL

Bore x Stroke

262 (4.3) 265 (4.3) 267 (4.4) 302 (5.0) 305 (5.0) 305 (5.0) 305 (5.0) 305 (5.0) 305 (5.0) 305 (5.0) 305 (5.0) 305 (5.0) 305 (5.0) 307 (5.0) 307 (5.0) 307 (5.0) 307 (5.0) 307 (5.0) 307 (5.0) 307 (5.0) 307 (5.0) 307 (5.0) 307 (5.0) 307 (5.0) 307 (5.0) 327 (5.4) 327 (5.4) 327 (5.4) 350 (5.7) 350 (5.7) 350 (5.7) 350 (5.7) 350 (5.7) 350 (5.7) 350 (5.7) 350 (5.7) 350 (5.7) Light Truck 350 (5.7) 350 (5.7) Light Truck 350 (5.7) Car 350 (5.7) Light Truck 350 (5.7) Light Truck 350 (5.7) 350 (5.7) 350 (5.7) 350 (5.7) Light Truck

G W J MO 7 E F G H M Q S U A B CA DC E F H ME ND P U X E FB HJ

3.67 x 3.10 3.75 x 3.00 3.50 x 3.48 4.00 x 3.00 3.74 x 3.48 3.74 x 3.48 3.74 x 3.48 3.74 x 3.48 3.74 x 3.48 3.74 x 3.48 3.74 x 3.48 3.74 x 3.48 3.74 x 3.48 3.86 x 3.25 3.86 x 3.25 3.86 x 3.25 3.86 x 3.25 3.86 x 3.25 3.86 x 3.25 3.86 x 3.25 3.86 x 3.25 3.86 x 3.25 3.86 x 3.25 3.86 x 3.25 3.86 x 3.25 4.00 x 3.25 4.00 x 3.25 4.00 x 3.25 4.00 x 3.48 4.00 x 3.48 4.00 x 3.48 4.00 x 3.48 4.00 x 3.48 4.00 x 3.48 4.00 x 3.48 4.00 x 3.48 4.00 x 3.48 4.00 x 3.48 4.00 x 3.48 4.00 x 3.48 4.00 x 3.48 4.00 x 3.48 4.00 x 3.48 4.00 x 3.48 4.00 x 3.48 4.00 x 3.48

8B663A Std. 01 10 20 30 40

8B663AO/S2 10 20 30 40

8B663P Std. 01 10 20 30 40 50 60

8B663PO/S2 10 20 30 40

4 6 7 8 E H K K L M P P R T V X Y

V8 V8 V8 V8 V8 V8 V8 V8 V8 V8 V8 V8 V8 V8 V8 V8 V8 V8 V8 V8 V8 V8 V8 V8 V8 V8 V8 V8 V8 V8 V8 V8 V8 V8 V8 V8 V8 V8 V8 V8 V8 V8 V8 V8 V8 V8

Max. Overall Length

Material Code

Qty. Set

Bearing Shell No.

TORQUE SETTINGS Connecting Rod 35 ft.lbs/48 Nm (11/32" bolts only) Connecting Rod 45 ft.lbs/61 Nm (3/8" bolts only) Main Bearing 75 ft.lbs/102 Nm

Rod - High Strength Aluminum Silicon material. 53.315/2.0990 56.507/2.2247 1.575/0.0620 .017/.0007 53.340/2.1000 56.520/2.2252 .081/.0032

21.25/0.837

F810

2376A

Rod - .002" oversize OD version of 8B663A. 53.315/2.0990 56.558/2.2267 1.727/0.0680 .018/.0007 53.340/2.1000 56.571/2.2272 (@ .010" u/s) .082/.0032

21.25/0.837

F810

9026A IH

Rod - standard oil clearance. 53.315/2.0990 56.507/2.2247 53.340/2.1000 56.520/2.2252

21.25/0.837

F780

2376 IH

21.25/0.837

F780

9026 IH

1.575/0.0620 .017/.0007 .081/.0032

Rod - .002" oversize OD version of 8B663P. 53.315/2.0990 56.558/2.2267 1.727/0.0680 .018/.0007 53.340/2.1000 56.571/2.2272 (@ .010" u/s) .082/.0032

CHEVROLET Type and Location

Standard Shaft Size

Housing Bore

Max. Bearing Thickness

Vertical Oil Clearance

Max. Overall Length

Material Code

Qty. Set

Bearing Shell No.

Engine Set No. Sizes Available

(Contâ&#x20AC;&#x2122;d.) Main - optional set to 5M909P with +0.020" overflange length increase. *See below for dimensional information. 1,2,3,4 62.189/2.4484 67.071/2.6406 2.426/0.0955 .008/.0003 20.50/0.807 F780 8 2377 62.212/2.4493 67.094/2.6415 .079/.0031 U/L 5 (Fl)

62.174/2.4478 67.071/2.6406 2.426/0.0955 .020/.0008 44.15/1.738 F780 62.200/2.4488 67.094/2.6415 .091/.0036 Note: For 302 engine only - standard shaft diameter on all positions is 2.4478"/2.4488" and oil clearance is .0008"/.0036".

.010" u/s shaft .020" u/s shaft .030" u/s shaft .040" u/s shaft .050" u/s shaft .060" u/s shaft

5M1626P 10 20 30 40 50 60

2379 U/L

* DIMENSIONAL INFORMATION FOR 5M1626P Overall Width (Nominal) Increase in Width 1.738" +0.020" 1.738" +0.020" 1.738" +0.020" 1.738" +0.020" 1.738" +0.020" 1.738" +0.020"

Main - optional set to 5M909P with +0.040" overflange length increase. *See below for dimensional information. 62.189/2.4484 67.071/2.6406 2.426/0.0955 .008/.0003 20.50/0.807 F780 8 2377 1,2,3,4 62.212/2.4493 67.094/2.6415 .079/.0031 U/L 5 (Fl)

62.174/2.4478 67.071/2.6406 2.426/0.0955 .020/.0008 1.76/0.069 F780 62.200/2.4488 67.094/2.6415 .091/.0036 Note: For 302 engine only - standard shaft diameter on all positions is 2.4478"/2.4488" and oil clearance is .0008"/.0036".

5M1683P 20 30 40

2355 U/L

* DIMENSIONAL INFORMATION FOR 5M1683P Overall Width (Nominal) Increase in Width .020" u/s shaft 1.758" +0.040" .030" u/s shaft 1.758" +0.040" .040" u/s shaft 1.758" +0.040" Main - optional set to 5M909P with +0.010" overflange length increase. *See dimensional information below. 1,2,3,4 62.189/2.4484 67.071/2.6406 2.426/0.0955 .008/.0003 20.50/0.807 F780 8 62.212/2.4493 67.094/2.6415 .079/.0031 5 (Fl) 62.174/2.4478 67.071/2.6406 2.426/0.0955 .020/.0008 43.89/1.728 F780 2 62.200/2.4488 67.094/2.6415 .091/.0036 Note: For 302 engine only - standard shaft diameter on all positions is 2.4478"/2.4488" and oil clearance is .0008"/.0036".

.010" u/s shaft .020" u/s shaft .030" u/s shaft .040" u/s shaft .050" u/s shaft .060" u/s shaft

2377 U/L 2365 U/L

* DIMENSIONAL INFORMATION FOR 5M1744P Overall Width (Nominal) Increase in Width 1.728" +0.010" 1.728" +0.010" 1.728" +0.010" 1.728" +0.010" 1.728" +0.010" 1.728" +0.010"

Main - High Strength Aluminum Silicon material. 1,2,3,4 62.189/2.4484 67.071/2.6406 2.426/0.0955 62.212/2.4493 67.094/2.6415 5 (Fl) 62.174/2.4478 67.071/2.6406 2.426/0.0955 62.200/2.4488 67.094/2.6415

.008/.0003 .079/.0031 .020/.0008 .091/.0036

20.50/0.807 43.64/1.718

F810 F810

8 2

2377A U/L 2378A U/L

Main - half groove. Standard oil clearance. 1,2,3,4 62.189/2.4484 67.071/2.6406 2.426/0.0955 .008/.0003 20.50/0.807 F780 8 2377 62.212/2.4493 67.094/2.6415 .079/.0031 U/L 5 (Fl) 62.174/2.4478 67.071/2.6406 2.426/0.0955 .020/.0008 43.64/1.718 F780 2 2378 62.200/2.4488 67.094/2.6415 .091/.0036 U/L Overflange length remains constant for standard and undersizes. Note: For 302 engine only - standard shaft diameter on all positions is 2.4478"/2.4488" and oil clearance is .0008"/.0036". Cam - Single piece from 5C3346C set. 47.452/1.8682 50.775/1.9990 1-5 47.478/1.8692 50.825/2.0010

5M1744P 10 20 30 40 50 60

1.641/0.0646 .025/.0010 .127/.0050

Cam - Single piece from 5C3349C set (#1 position cam). 47.452/1.8682 51.283/2.0190 1.895/0.0746 .025/.0010 47.478/1.8692 51.333/2.0210 .127/.0050

19.05/0.750

F830

3346

5M909A Std. 01 10 20 30 40

5M909P Std. 01 10 20 30 40 50 60

1C3346C Std.

19.05/0.750

F830

3349

1C3349C Std.

CHEVROLET Engine Set No. Sizes Available

Type and Location

Standard Shaft Size

Housing Bore

Max. Bearing Thickness

Vertical Oil Clearance

Max. Overall Length

Material Code

Qty. Set

Bearing Shell No.

35 (Contâ&#x20AC;&#x2122;d.) 5C004AS Std.

5C004BS Std.

5C290S Std.

5C3346C Std.

5C3349C Std.

19536

Cam - +0.020" O.D. all housing bores 2.0390"/2.0410" (High Performance). Customer to drill oil holes. 1-5 47.452/1.8682 51.791/2.0390 2.149/0.0846 .025/.0010 19.05/0.750 F830 5 47.478/1.8692 51.841/2.0410 .127/.0050

19537

Cam - standard housing bores. 47.452/1.8682 51.283/2.0190 1 47.478/1.8692 51.333/2.0210

1.890/0.0744

18.92/0.745

F23

CH-4-1

2,5

47.452/1.8682 47.478/1.8692

51.029/2.0090 51.079/2.0110

1.760/0.0694

18.92/0.745

F23

CH-4-2

3,4

47.452/1.8682 47.478/1.8692

50.775/1.9990 50.825/2.0010

1.640/0.0646

18.92/0.745

F23

CH-4-3

Cam - All housing bores constant at 1.9990"/2.0010" (High Performance). 47.452/1.8682 50.775/1.9990 1.641/0.0646 .025/.0010 19.05/0.750 1-5 47.478/1.8692 50.825/2.0010 .127/.0050

F830

3346

19.05/0.750

F830

3349

19.05/0.750

F830

3347

19.05/0.750

F830

3346

Cam - standard housing bores (High Performance). 1 47.452/1.8682 51.283/2.0190 1.895/0.0746 47.478/1.8692 51.333/2.0210 2,5 47.452/1.8682 51.029/2.0090 1.768/0.0696 47.478/1.8692 51.079/2.0110 3,4 47.452/1.8682 50.775/1.9990 1.641/0.0646 47.478/1.8692 50.825/2.0010

ENGINE

VIN CYL

265 (4.3) 283 (4.6) 302 (5.0) Small Pin 327 (5.4) Small Pin

V8 V8 V8 V8

.025/.0010 .127/.0050 .025/.0010 .127/.0050 .025/.0010 .127/.0050

Bore x Stroke 3.75 x 3.00 3.88 x 3.00 4.00 x 3.00 4.00 x 3.25

TORQUE SETTINGS Connecting Rod 35 ft.lbs/48 Nm (11/32" bolts only) Connecting Rod 45 ft.lbs/61 Nm (3/8" bolts only) Main Bearing 60-70 ft.lbs/81-95 Nm (265,283,327 engines)

Main Bearing 80 ft.lbs/108 Nm (302 engines) Rod

8B745P

50.775/1.9990 50.800/2.0000

Std. 01 10 20 30 40

5M2372P 10 20 30 40

53.967/2.1247 53.980/2.1252

58.364/2.2978 63.261/2.4906 58.390/2.2988 63.287/2.4916 Stock not available from fee warehouses.

.010" u/s shaft .020" u/s shaft .030" u/s shaft .040" u/s shaft

Std. 01 10 20 30 40

1C3346C Std.

1C3349C Std.

21.38/0.842

F780

2370 IH

Main - Alt set to 5M429P with +0.010" overflange length increase. * See below for dimensional information. 1,2,3,4 58.377/2.2983 63.261/2.4906 2.426/0.0955 .007/.0003 20.49/0.807 F780 8 7132 58.402/2.2993 63.287/2.4916 .084/.0033 U/L 5 (Fl)

5M429P

1.577/0.0621 .013/.0005 .076/.0030

2.428/0.0956 .015/.0006 .093/.0037

43.89/1.728

F780

3345 U/L

7132 U/L 7104 U/L

* DIMENSIONAL INFORMATION FOR 5M2372P Overall Width (Nominal) Increase in Width 1.728" +0.010" 1.728" +0.010" 1.728" +0.010" 1.728" +0.010"

Main 1,2,3,4

58.377/2.2983 63.261/2.4906 2.426/0.0955 58.402/2.2993 63.287/2.4916 5 (Fl) 58.364/2.2978 63.261/2.4906 2.428/0.0956 58.390/2.2988 63.287/2.4916 Overflange length remains constant for standard and undersizes. Cam - Single piece from 5C3346C set 1-5 47.452/1.8682 50.775/1.9990 47.478/1.8692 50.825/2.0010

.007/.0003 .084/.0033 .015/.0006 .093/.0037

20.49/0.807

F780

43.64/1.718

F780

1.641/0.0646 .025/.0010 .127/.0050

19.05/0.750

F830

3346

19.05/0.750

F830

3349

Cam - Single piece from 5C3349C set (#1 cam). 47.452/1.8682 51.283/2.0190 1.895/0.0746 .025/.0010 47.478/1.8692 51.333/2.0210 .127/.0050

CHEVROLET Type and Location

Standard Shaft Size

Max. Bearing Thickness

Housing Bore

Vertical Oil Clearance

Max. Overall Length

Material Code

Qty. Set

Bearing Shell No.

Engine Set No. Sizes Available

(Contâ&#x20AC;&#x2122;d.) Cam - +0.010" O.D. all housing bores 2.0290"/2.0310" (High Performance). Customer to drill oil holes. 47.452/1.8682 51.537/2.0290 2.022/0.0796 .025/.0010 19.05/0.750 F830 5 1-5 47.478/1.8692 51.587/2.0310 .127/.0050

19536

19537

Cam - engines from 1955-1963. 47.452/1.8682 51.283/2.0190 1 47.478/1.8692 51.333/2.0210

1.890/0.0744

18.92/0.745

F23

CH-4-1

47.452/1.8682 47.478/1.8692

51.029/2.0090 51.079/2.0110

1.763/0.0694

18.92/0.745

F23

CH-4-2

3,4

47.452/1.8682 47.478/1.8692 47.452/1.8682 47.478/1.8692

50.775/1.9990 50.825/2.0010 51.029/2.0090 51.079/2.0110

1.640/0.0646

18.92/0.745

F23

CH-4-3

1.763/0.0694

24.00/0.945

F23

CH-4-4

Cam - engines from 1964-1967 - standard housing bores. 47.452/1.8682 51.283/2.0190 1.890/0.0744 1 47.478/1.8692 51.333/2.0210

18.92/0.745

F23

CH-4-1

2,5

47.452/1.8682 47.478/1.8692

51.029/2.0090 51.079/2.0110

1.760/0.0694

18.92/0.745

F23

CH-4-2

3,4

47.452/1.8682 47.478/1.8692

50.775/1.9990 50.825/2.0010

1.640/0.0646

18.92/0.745

F23

CH-4-3

Cam - All housing bores constant at 1.9990"/2.0010" (High Performance) 47.452/1.8682 50.775/1.9990 1.641/0.0646 .025/.0010 19.05/0.750 1-5 47.478/1.8692 50.825/2.0010 .127/.0050

F830

3346

5C004AS Std.

5C004BS Std.

5C287S Std.

ENGINE

VIN CYL

292 (4.8) 292 (4.8) 292 (4.8) 292 (4.8)

S S T

L6 L6 L6 L6

5C290S Std.

.025/.0010 .127/.0050 .025/.0010 .127/.0050 .025/.0010 .127/.0050

Bore x Stroke 3.88 x 4.13 3.88 x 4.13 3.88 x 4.13 3.88 x 4.13

5C3346C Std.

19.05/0.750

F830

3349

19.05/0.750

F830

3347

19.05/0.750

F830

3346

5C3349C Std.

TORQUE SETTINGS

Connecting Rod 30-35 ft.lbs/41-48 Nm Main Bearing 60-70 ft.lbs/81-95 Nm

Rod - High Strength Aluminum Silicon material. 53.315/2.0990 56.507/2.2247 1.575/0.0620 .017/.0007 53.340/2.1000 56.520/2.2252 .081/.0032

21.25/0.837

F810

6B663A

2376A IH

Std. 10 20 30 40

2376 IH

Std. 10 20 30 40

7132 U/L

Std. 10 20 30 40

Rod 53.315/2.0990 53.340/2.1000

56.507/2.2247 56.520/2.2252

1.575/0.0620 .017/.0007 .081/.0032

21.25/0.837

58.377/2.2983 58.402/2.2993

63.261/2.4906 63.287/2.4916

2.426/0.0955 .007/.0003 .084/.0033

20.49/0.807

58.377/2.2983 63.261/2.4906 2.426/0.0955 .007/.0003 58.402/2.2993 63.287/2.4916 .084/.0033 Overflange length remains constant for standard and undersizes.

25.63/1.009

F780

7133 U/L

1.763/0.0694

21.97/0.865

F23

CH-5-2

1.636/0.0644

21.97/0.865

F23

CH-5-3

1.636/0.0644

21.97/0.865

F23

CH-5-3

Main 1-6 7 (Fl)

Cam - engines from 1963-1970. 47.452/1.8682 51.029/2.0090 1,4 47.478/1.8692 51.079/2.0110 2,3 47.452/1.8682 50.775/1.9990 47.478/1.8692 50.825/2.0010 Cam - engines from 1971-1990. 47.452/1.8682 50.775/1.9990 1,2,3,4 47.478/1.8692 50.825/2.0010

F780

6B663P

7M617P

4C399S Std.

4C718S Std.

CHEVROLET Engine Set No. Sizes Available

Type and Location

Standard Shaft Size

Housing Bore

Max. Bearing Thickness

Vertical Oil Clearance

ENGINE

VIN CYL

Bore x Stroke

294 (4.8) 323 (5.3) 323 (5.3) 323 (5.3) 323 (5.3) 325 (5.3) 325 (5.3) 325 (5.3) 325 (5.3) 325 5328cc (5.3) 325 5328cc (5.3) (L59) 350 (5.7) 350 (5.7) 364 (6.0) 364 (6.0) 364 (6.0)

V B M T Z B M P T C Z G S H N U

96mm x 83mm 96mm x 92mm 96mm x 92mm 96mm x 92mm 96mm x 92mm 96mm x 92mm 96mm x 92mm 96mm x 92mm 96mm x 92mm 96mm x 92mm 96mm x 92mm 99mm x 92mm 99mm x 92mm 101.6mm x 92mm 101.6mm x 92mm 101.6mm x 92mm

8B663A Std. 01 10 20 30 40

8B663AO/S2 10 20 30 40

V8 V8 V8 V8 V8 V8 V8 V8 V8 V8 V8 V8 V8 V8 V8 V8

Max. Overall Length

Material Code

Qty. Set

Bearing Shell No.

TORQUE SETTINGS Connecting Rod 15 ft.lbs/20 Nm + 60 deg. Main Bearing Consult service manual

Rod - High Strength Aluminum Silicon material. 53.315/2.0990 56.507/2.2247 1.575/0.0620 .017/.0007 53.340/2.1000 56.520/2.2252 .081/.0032

21.25/0.837

F810

2376A

Rod - .002" oversize OD version of 8B663A. 53.315/2.0990 56.558/2.2267 1.727/0.0680 .018/.0007 53.340/2.1000 56.571/2.2272 (@ .010" u/s) .082/.0032

21.25/0.837

F810

9026A IH

21.25/0.837

F780

2376 IH

21.25/0.837

F780

9026 IH

20.45/0.805

F810

26.10/1.028

F810

7298A U/L 7299A U/L

Cam - 1997-2003 with 1st design # 1 & 5 housing size of 2.3260"-2.3280". 54.991/2.1650 59.080/2.3260 2.007/0.0790 16.00/0.630 1,5 55.042/2.1670 59.131/2.3280

F23

CH-10-1

2,4

Rod

8B663P

53.315/2.0990 53.340/2.1000

Std. 01 10 20 30 40 50 60

8B663PO/S2 10 20 30 40

56.507/2.2247 56.520/2.2252

1.575/0.0620 .017/.0007 .081/.0032

Rod - .002" oversize OD version of 8B663P. 53.315/2.0990 56.558/2.2267 1.727/0.0680 .018/.0007 53.340/2.1000 56.571/2.2272 (@ .010" u/s) .082/.0032

Main - High Strength Aluminum Silicon material. 1,2,4,5 64.993/2.5588 69.873/2.7509 2.430/0.0957 Std. 10 20 30 40 65.007/2.5593 69.887/2.7515 3 (Fl) 64.993/2.5588 69.873/2.7509 2.430/0.0957 65.007/2.5593 69.887/2.7515

5M7298A

5C1000S Std.

1.880/0.0740

16.00/0.630

F23

CH-10-2

1.758/0.0692

16.00/0.630

F23

CH-10-3

Cam - 2003 on with 2nd design # 1 & 5 housing size of 2.3460"-2.3480". 54.991/2.1650 59.588/2.3460 2.260/0.0890 16.00/0.630 1,5 55.042/2.1670 59.639/2.3480

F23

CH-23-1

2,4

54.991/2.1650 54.042/2.1276

59.080/2.3260 59.131/2.3280

2.007/0.0790

16.00/0.630

F23

CH-10-1

54.991/2.1650 55.042/2.1670

58.580/2.3063 58.631/2.3083

1.758/0.0692

16.00/0.630

F23

CH-10-3

5C1001S Std.

54.991/2.1650 55.042/2.1670 54.991/2.1650 55.042/2.1670

58.829/2.3161 58.879/2.3181 58.580/2.3063 58.631/2.3083

.006/.0002 .046/.0018 .002/.0001 .046/.0018

ENGINE

VIN CYL

Bore x Stroke

307 (5.0) Oldsmobile Eng.

4.00 x 3.00

TORQUE SETTINGS Connecting Rod 42 ft.lbs/57 Nm Main Bearing 120 ft.lbs/163 Nm (rear bearing cap only) Main Bearing 80 ft.lbs/108 Nm (except rear bearing cap)

Rod

8B684P Std. 10 20 30 40

8B684PO/S2 10 20 30 40

53.945/2.1238 53.970/2.1248

57.137/2.2495 57.150/2.2500

1.572/0.0619 .023/.0009 .087/.0034

Rod - .002" oversize OD version of 8B684P. 53.945/2.1238 57.188/2.2515 1.724/0.0679 .024/.0009 53.970/2.1248 57.201/2.2520 (@ .010" u/s) .088/.0035

21.11/0.831

F780

8500 IH

21.11/0.831

F780

9041 IH

CHEVROLET Type and Location

Standard Shaft Size

Max. Bearing Thickness

Housing Bore

Vertical Oil Clearance

Max. Overall Length

Material Code

Qty. Set

Bearing Shell No.

Engine Set No. Sizes Available

(Contâ&#x20AC;&#x2122;d.) Main 1(L)

63.462/2.4985 63.487/2.4995

68.250/2.6870 68.275/2.6880

2.377/0.0936 .009/.0004 .084/.0033

24.76/0.975

1(U),2,4

63.462/2.4985 63.487/2.4995

68.250/2.6870 68.275/2.6880

2.377/0.0936 .009/.0004 .084/.0033

24.76/0.975

F780

8505 IH

3 (Fl)

63.457/2.4983 63.482/2.4993 63.462/2.4985 63.487/2.4995

68.250/2.6870 68.275/2.6880 68.250/2.6870 68.275/2.6880

2.377/0.0936 .009/.0004 .084/.0033 2.377/0.0936 .009/.0004 .084/.0033

30.35/1.195

F780

41.37/1.629

F780

8503 IH 8504 U/L

F780

8502 L

Main - optional set to 5M805P with +0.010" overflange length increase. *See below for dimensional information. 63.462/2.4985 68.250/2.6870 2.377/0.0936 .009/.0004 24.76/0.975 F780 1 8502 1 63.487/2.4995 68.275/2.6880 .084/.0033 L 1(U),2,4

63.462/2.4985 63.487/2.4995

68.250/2.6870 68.275/2.6880

2.377/0.0936 .009/.0004 .084/.0033

24.76/0.975

F780

8505 IH

63.457/2.4983 68.250/2.6870 63.482/2.4993 68.275/2.6880 5 63.462/2.4985 68.250/2.6870 63.487/2.4995 68.275/2.6880 Stock not available from fee warehouses.

2.377/0.0936 .009/.0004 .084/.0033 2.377/0.0936 .009/.0004 .084/.0033

30.61/1.205

F780

41.37/1.629

F780

8603 IH 8504 U/L

3 (Fl)

.010" u/s shaft .020" u/s shaft .030" u/s shaft .040" u/s shaft Cam 1 2 3 4 5

51.707/2.0357 51.727/2.0365 51.199/2.0157 51.219/2.0165 50.691/1.9957 50.711/1.9965 50.183/1.9757 50.203/1.9765

55.067/2.1680 55.105/2.1695 54.560/2.1480 54.597/2.1495 54.051/2.1280 54.090/2.1295 53.543/2.1080 53.581/2.1095

49.675/1.9557 49.695/1.9565

53.035/2.0880 53.073/2.0895

5M805P Std. 10 20 30 40

5M8603P 10 20 30 40

* DIMENSIONAL INFORMATION FOR 5M8603P Overall Width (Nominal) Increase in Width 1.205" +0.010" 1.205" +0.010" 1.205" +0.010" 1.205" +0.010"

1.640/0.0646

17.60/0.693

F23

O-7-1

1.640/0.0646

17.60/0.693

F23

O-6-2

1.640/0.0646

17.60/0.693

F23

O-6-3

1.640/0.0646

17.60/0.693

F23

O-6-4

1.640/0.0646

17.60/0.693

F23

O-6-5

23.37/0.920

F100

3049YA20

5C1088S Std.

Small End 24.933/0.9816 27.534/1.0840 (Nominal) (Finish ID Bore Size)

RB3049YA20 Semi

ENGINE

VIN CYL

Bore x Stroke

350 (5.7) Oldsmobile Eng. Diesel 350 (5.7) Oldsmobile Eng. Diesel

N Z

4.06 x 3.39 4.06 x 3.39

V8 V8

TORQUE SETTINGS

Connecting Rod 42 ft.lbs/57 Nm Main Bearing 120 ft.lbs/163 Nm

Rod 53.945/2.1238 53.970/2.1248

57.137/2.2495 57.150/2.2500

1.572/0.0619 .023/.0009 .087/.0034

Rod - .002" oversize OD version of 8B684P. 53.945/2.1238 57.188/2.2515 1.724/0.0679 .024/.0009 53.970/2.1248 57.201/2.2520 (@ .010" u/s) .088/.0035

21.11/0.831

F780

8500 IH 9041 IH

8B684P Std. 10 20 30 40

8B684PO/S2 10 20 30 40

CHEVROLET Engine Set No. Sizes Available

Type and Location

Standard Shaft Size

Housing Bore

76.182/2.9993 76.208/3.0003

80.975/3.1880 81.001/3.1890

76.182/2.9993 76.208/3.0003

80.975/3.1880 81.001/3.1890

Max. Bearing Thickness

Vertical Oil Clearance

Max. Overall Length

Material Code

Qty. Set

Bearing Shell No.

2.377/0.0936 .013/.0005 .091/.0036

24.87/0.979

F780

8507 L

2.377/0.0936 .013/.0005 .091/.0036

24.87/0.979

F780

8512 U

24.87/0.979

F780

30.38/1.196

F780

41.28/1.625

F780

8512 IH 8508 IH 8509 U/L

40 (Contâ&#x20AC;&#x2122;d.) 5M804P

Main 1

Std. 10 20 30 40 1 2,4

5M8519P 20 30 40

.013/.0005 .091/.0036 .013/.0005 .091/.0036 .013/.0005 .091/.0036

Main - optional set to 5M804P with +0.010" overflange length increase. *See below for dimensional information. 76.182/2.9993 80.975/3.1880 2.377/0.0936 .013/.0005 24.87/0.979 F780 1 8507 1 76.208/3.0003 81.001/3.1890 .091/.0036 L 1

2.377/0.0936 .013/.0005 .091/.0036 2.377/0.0936 .013/.0005 .091/.0036 2.377/0.0936 .013/.0005 .091/.0036 2.377/0.0936 .013/.0005 .091/.0036

24.87/0.979

F780

24.87/0.979

F780

30.63/1.206

F780

41.28/1.625

F780

8512 U 8512 IH 8519 IH 8509 U/L

* DIMENSIONAL INFORMATION FOR 5M8519P Overall Width (Nominal) Increase in Width .020" u/s shaft 1.206" +0.010" .030" u/s shaft 1.206" +0.010" .040" u/s shaft 1.206" +0.010"

5C1088S

Cam 1

Std. 2 3 4 5

51.707/2.0357 51.727/2.0365

55.067/2.1680 55.105/2.1695

1.640/0.0646

17.60/0.693

F23

O-7-1

51.199/2.0157 51.219/2.0165 50.691/1.9957 50.711/1.9965 50.183/1.9757 50.203/1.9765 49.675/1.9557 49.695/1.9565

54.560/2.1480 54.597/2.1495 54.051/2.1280 54.090/2.1295 53.543/2.1080 53.581/2.1095 53.035/2.0880 53.073/2.0895

1.640/0.0646

17.60/0.693

F23

O-6-2

1.640/0.0646

17.60/0.693

F23

O-6-3

1.640/0.0646

17.60/0.693

F23

O-6-4

1.640/0.0646

17.60/0.693

F23

O-6-5

CHEVROLET Type and Location

Standard Shaft Size

ENGINE 366 (6.0) 396 (6.5) 396 (6.5) 402 (6.6) 402 (6.6) 402 (6.6) 402 (6.6) 427 (7.0) 454 (7.4) 454 (7.4) 454 (7.4) 454 (7.4) 454 (7.4) 454 (7.4) 454 (7.4) 454 (7.4) 454 (7.4) 454 (7.4) 454 (7.4) 454 (7.4)

Max. Bearing Thickness

Housing Bore

VIN CYL

E K S U B E J L N S V W X Y Z

V8 V8 V8 V8 V8 V8 V8 V8 V8 V8 V8 V8 V8 V8 V8 V8 V8 V8 V8 V8

Vertical Oil Clearance

Bore x Stroke

Max. Overall Length

Material Code

Qty. Set

Bearing Shell No.

Engine Set No. Sizes Available

TORQUE SETTINGS

Connecting Rod 45-55 ft.lbs/61-75 Nm (all engines) Main Bearing 110-120 ft.lbs/150-163 Nm (High

3.94 x 3.77 4.09 x 3.77 4.09 x 3.77 4.13 x 3.77 4.13 x 3.77 4.13 x 3.77 4.13 x 3.77 4.25 x 3.77 4.25 x 4.00 4.25 x 4.00 4.25 x 4.00 4.25 x 4.00 4.25 x 4.00 4.25 x 4.00 4.25 x 4.00 4.25 x 4.00 4.25 x 4.00 4.25 x 4.00 4.25 x 4.00 4.25 x 4.00

Performance)

Main Bearing 90-100 ft.lbs/122-136 Nm (except High Performance)

Rod - High Strength Aluminum Silicon material. 55.855/2.1990 59.047/2.3247 1.575/0.0620 .017/.0007 55.880/2.2000 59.060/2.3252 .081/.0032

22.58/0.889

Rod - .002" oversize OD version of 8B743A. 55.855/2.1990 59.098/2.3267 1.727/0.0680 .017/.0007 55.880/2.2000 59.111/2.3272 (@ .010" u/s) .081/.0032

22.58/0.889

F810

7100A IH 9100A IH

8B743A Std. 01 10 20 30 40

8B743AO/S2 10 20 30 40

Rod 55.855/2.1990 55.880/2.2000

59.047/2.3247 59.060/2.3252

1.575/0.0620 .017/.0007 .081/.0032

Rod - .002" oversize OD version of 8B743P. 55.855/2.1990 59.098/2.3267 1.727/0.0680 .017/.0007 55.880/2.2000 59.111/2.3272 (@ .010" u/s) .081/.0032

22.58/0.889

F780

7100 IH 9100 IH

Main - optional set to 5M829P with +0.010" overflange length increase. *See below for dimensional information. 69.804/2.7482 74.600/2.9370 2.380/0.0937 .010/.0004 26.46/1.042 F780 8 7102 1,2,3,4 69.830/2.7492 74.625/2.9380 .087/.0034 U/L 5 (Fl)

69.794/2.7478 74.600/2.9370 69.820/2.7488 74.625/2.9380 Stock not available from fee warehouses.

.010" u/s shaft .020" u/s shaft .030" u/s shaft .040" u/s shaft

2.380/0.0937 .020/.0008 .097/.0038

46.25/1.821

F780

69.794/2.7478 74.600/2.9370 69.820/2.7488 74.625/2.9380 To be discontinued when stock exhausted.

8B743PO/S2 10 20 30 40

5M1745P 10 20 30 40

7105 U/L

* DIMENSIONAL INFORMATION FOR 5M1745P Overall Width (Nominal) Increase in Width 1.821" +0.010" 1.821" +0.010" 1.821" +0.010" 1.821" +0.010"

Main - optional set to 5M829P with +0.020" overflange length increase. *See below for dimensional information. 69.804/2.7482 74.600/2.9370 2.380/0.0937 .010/.0004 26.46/1.042 F780 8 7102 1,2,3,4 69.820/2.7488 74.625/2.9380 .087/.0034 U/L 5 (Fl)

8B743P Std. 01 10 20 30 40

2.380/0.0937 .020/.0008 .097/.0038

46.50/1.831

F780

5M7023P 40

7023 U/L

* DIMENSIONAL INFORMATION FOR 5M7023P Overall Width (Nominal) Increase in Width .040" u/s shaft 1.831" +0.020" Main - High Strength Aluminum Silicon material. 69.804/2.7482 74.600/2.9370 2.380/0.0937 .010/.0004 1,2,3,4 69.830/2.7492 74.625/2.9380 .087/.0034

26.46/1.042

5 (Fl)

46.00/1.811

69.794/2.7478 69.820/2.7488

74.600/2.9370 74.625/2.9380

2.380/0.0937 .020/.0008 .097/.0038

F810 F810

8 2

7102A U/L 7103A U/L

5M829A Std. 10 20 30 40

CHEVROLET Engine Set No. Sizes Available

Type and Location

Standard Shaft Size

Housing Bore

Max. Bearing Thickness

Vertical Oil Clearance

Max. Overall Length

Material Code

Qty. Set

Bearing Shell No.

26.46/1.042

F780

7102 U/L

46.00/1.811

F780

7103 U/L

41 (Contâ&#x20AC;&#x2122;d.) Main - half groove set - standard oil clearance. 1,2,3,4 69.804/2.7482 74.600/2.9370 2.380/0.0937 .010/.0004 Std. 01 10 20 30 40 69.830/2.7492 74.625/2.9380 .087/.0034

5M829P

5 (Fl)

69.794/2.7478 74.600/2.9370 2.380/0.0937 .020/.0008 69.820/2.7488 74.625/2.9380 .097/.0038 Overflange length remains constant for standard and undersizes.

5C615S Std.

5C616S Std.

Cam - engines from 1965-1966. 49.497/1.9487 54.343/2.1395 1 49.522/1.9497 54.369/2.1405

2.390/0.0941

21.97/0.865

F23

CH-12-1

49.497/1.9487 49.522/1.9497

54.089/2.1295 54.115/2.1305

2.260/0.0891

25.02/0.985

F23

CH-12-2

3,4

49.497/1.9487 49.522/1.9497

53.835/2.1195 53.861/2.1205

2.140/0.0841

25.02/0.985

F23

CH-12-3

49.497/1.9487 49.522/1.9497

54.089/2.1295 54.115/2.1305

2.270/0.0894

25.02/0.985

F23

CH-9-4

2.390/0.0941

21.97/0.865

F23

CH-12-1

2.260/0.0891

25.02/0.985

F23

CH-12-2

2.140/0.0841

25.02/0.985

F23

CH-12-3

Cam - engines from 1967 on. 1 49.497/1.9487 54.343/2.1395 49.522/1.9497 54.369/2.1405 2,5 49.497/1.9487 54.089/2.1295 49.522/1.9497 54.115/2.1305 3,4

49.497/1.9487 49.522/1.9497

53.835/2.1195 53.861/2.1205

ENGINE

VIN CYL

Bore x Stroke

379 (6.2) Diesel 379 (6.2) Diesel 395 (6.5) Turbo Diesel 395 (6.5) Diesel 395 (6.5) Turbo Diesel 395 (6.5) Diesel

C J F P S Y

3.98 x 3.82 3.98 x 3.82 4.06 x 3.82 4.06 x 3.82 4.06 x 3.82 4.06 x 3.82

V8 V8 V8 V8 V8 V8

TORQUE SETTINGS Connecting Rod 48 ft. lbs Main Bearing 100 ft.lbs (outer bolt - 6.2 diesel engine only)

Main Bearing 110 ft.lbs (inner bolt) Main Bearing 111 ft.lbs (outer bolt - 6.5 diesel engine only)

Rod

8B1286P

60.914/2.3982 60.940/2.3992

Std. .025 .25 .50 .75

64.125/2.5246 64.150/2.5256

1.570/0.0618 .048/.0019 .120/.0047

Main - For all 6.2L & 6.5L engines. 1,2,4 74.917/2.9495 79.825/3.1427 2.425/0.0955 Std. .025 .25 .50 .75 1.0 74.940/2.9504 79.850/3.1437 3 (Fl) 74.917/2.9495 79.825/3.1427 2.425/0.0955 74.940/2.9504 79.850/3.1437 5 74.912/2.9493 79.825/3.1427 2.425/0.0955 74.937/2.9503 79.850/3.1437 Overflange length remains constant for standard and undersizes.

5M2091P

5C1199S

Cam 1

Std. 2 3 4 5

RB3864Y20 Semi

.040/.0016 .114/.0045 .040/.0016 .114/.0045 .045/.0018 .119/.0047

22.91/0.902

F780

1292 IH

22.78/0.897

F780

28.70/1.130

F780

35.33/1.391

F780

2087 U/L 2089 U/L 2088 U/L

54.976/2.1644 55.024/2.1663

59.106/2.3270 59.157/2.3290

2.030/0.0798

22.86/0.900

F23

GM-7-1

54.976/2.1644 55.024/2.1663 54.976/2.1644 55.024/2.1663 54.976/2.1644 55.024/2.1663 50.975/2.0069 51.026/2.0089

58.877/2.3180 58.928/2.3200 58.623/2.3080 58.674/2.3100 58.369/2.2980 58.420/2.3000 54.381/2.1410 54.432/2.1430

1.910/0.0753

19.81/0.780

F23

GM-7-2

1.790/0.0703

19.81/0.780

F23

GM-7-3

1.660/0.0653

19.81/0.780

F23

GM-7-4

1.660/0.0655

19.81/0.780

F23

GM-7-5

25.40/1.000

F100

3864Y20

Small End - semi-finished - .020" bore stock allowance. 31.026/1.2215 33.139/1.3047 (Finished ID Size) (Nominal)

CHEVROLET Type and Location

Standard Shaft Size

ENGINE 400 (6.6) Small block 400 (6.6) Small block 400 (6.6) Small block 400 (6.6) Small block 400 (6.6) Small block 400 (6.6) Small block 400 (6.6) Small block

Max. Bearing Thickness

Housing Bore

VIN CYL E K M R U X

V8 V8 V8 V8 V8 V8 V8

Vertical Oil Clearance

Bore x Stroke

Max. Overall Length

Material Code

Qty. Set

Bearing Shell No.

TORQUE SETTINGS

Connecting Rod 45 ft. lbs/61 Nm Main Bearing 75 ft.lbs/102 Nm

4.13 x 3.75 4.13 x 3.75 4.13 x 3.75 4.13 x 3.75 4.13 x 3.75 4.13 x 3.75 4.13 x 3.75

Rod - High Strength Aluminum Silicon material. 53.315/2.0990 56.507/2.2247 1.575/0.0620 .017/.0007 53.340/2.1000 56.520/2.2252 .081/.0032

21.25/0.837

Rod - .002" oversize OD version of 8B663A. 53.315/2.0990 56.558/2.2267 1.727/0.0680 .018/.0007 53.340/2.1000 56.571/2.2272 (@ .010" u/s) .082/.0032

21.25/0.837

Rod - standard oil clearance. 53.315/2.0990 56.507/2.2247 53.340/2.1000 56.520/2.2252

21.25/0.837

1.575/0.0620 .017/.0007 .081/.0032

Rod - .002" oversize OD version of 8B663P. 53.315/2.0990 56.558/2.2267 1.727/0.0680 .018/.0007 53.340/2.1000 56.571/2.2272 (@ .010" u/s) .082/.0032

F810

2376A

67.257/2.6479 72.151/2.8406 67.280/2.6488 72.174/2.8415 Stock not available from fee warehouses.

.010" u/s shaft .020" u/s shaft .030" u/s shaft .040" u/s shaft

2.423/0.0954 .025/.0010 .097/.0038

8B663A Std. 01 10 20 30 40

21.25/0.837

F810

F780

9026A IH 2376 IH 9026 IH

Main - optional set to 5M1038P with +0.010" overflange length increase. *See below for dimensional information. 67.269/2.6484 72.151/2.8406 2.423/0.0954 .013/.0005 20.44/0.805 F780 8 7113 1,2,3,4 67.292/2.6493 72.174/2.8415 .084/.0033 U/L 5 (Fl)

Engine Set No. Sizes Available

43.89/1.728

F780

8B663AO/S2 10 20 30 40

8B663P Std. 01 10 20 30 40 50 60

8B663PO/S2 10 20 30 40

5M1036P 10 20 30 40

1036 U/L

* DIMENSIONAL INFORMATION FOR 5M1036P Overall Width (Nominal) Increase in Width 1.728" +0.010" 1.728" +0.010" 1.728" +0.010" 1.728" +0.010"

Main - half groove - standard oil clearance. 1,2,3,4 67.269/2.6484 72.151/2.8406 2.423/0.0954 67.292/2.6493 72.174/2.8415 5 (Fl) 67.257/2.6479 72.151/2.8406 2.423/0.0954 67.280/2.6488 72.174/2.8415 Overflange length remains constant for standard and undersizes.

.013/.0005 .084/.0033 .025/.0010 .097/.0038

20.44/0.805 43.64/1.718

F780 F780

8 2

7113 U/L 7115 U/L

Main - optional set to 5M1038P with +0.004" overflange length increase. *See below for dimensional information. 67.269/2.6484 72.151/2.8406 2.423/0.0954 .013/.0005 20.44/0.805 F780 8 7113 1,2,3,4 67.292/2.6493 72.174/2.8415 .084/.0033 U/L 5 (Fl) 67.257/2.6479 72.151/2.8406 2.423/0.0954 .025/.0010 43.74/1.722 F780 2 7155 67.280/2.6488 72.174/2.8415 .097/.0038 U/L To be discontinued when stock exhausted.

5M1038P Std. 01 10 20 30 40

5M7155P 40

* DIMENSIONAL INFORMATION FOR 5M7155P Overall Width (Nominal) Increase in Width .040" u/s shaft 1.722" +0.004" Cam - Single piece from 5C3346C set 47.452/1.8682 50.775/1.9990 1-5 47.478/1.8692 50.825/2.0010

1.641/0.0646 .025/.0010 .127/.0050

Cam - Single piece from 5C3349C set (#1 cam). 47.452/1.8682 51.283/2.0190 1.895/0.0746 .025/.0010 47.478/1.8692 51.333/2.0210 .127/.0050

19.05/0.750

F830

3346

Std. 19.05/0.750

F830

3349

1C3349C Std.

19536

19537

1C3346C

5C004AS Std.

5C004BS Std.

CHEVROLET Engine Set No. Sizes Available

Type and Location

Standard Shaft Size

Housing Bore

Max. Bearing Thickness

Vertical Oil Clearance

Max. Overall Length

Material Code

Qty. Set

Bearing Shell No.

43 (Contâ&#x20AC;&#x2122;d.) 5C290S Std.

5C3346C Std.

5C3349C Std.

Cam - standard housing bores. 47.452/1.8682 51.283/2.0190 1 47.478/1.8692 51.333/2.0210

1.890/0.0744

18.92/0.745

F23

CH-4-1

2,5

47.452/1.8682 47.478/1.8692

51.029/2.0090 51.079/2.0110

1.760/0.0694

18.92/0.745

F23

CH-4-2

3,4

47.452/1.8682 47.478/1.8692

50.775/1.9990 50.825/2.0010

1.640/0.0646

18.92/0.745

F23

CH-4-3

Cam - All housing bores constant at 1.9990"/2.0010" (High Performance) 47.452/1.8682 50.775/1.9990 1.641/0.0646 .025/.0010 19.05/0.750 1-5 47.478/1.8692 50.825/2.0010 .127/.0050

F830

3346

19.05/0.750

F830

3349

19.05/0.750

F830

3347

19.05/0.750

F830

3346

.025/.0010 .127/.0050 .025/.0010 .127/.0050 .025/.0010 .127/.0050

ENGINE

VIN CYL

Bore x Stroke

496 (8.1)

4.25 x 4.37

8B743A Std. 01 10 20 30 40

8B743AO/S2 10 20 30 40

TORQUE SETTINGS Connecting Rod 22 ft.lbs + 90 deg Main Bearing 22 ft.lbs + 80 deg (Outer studs) Main Bearing 22 ft.lbs + 90 deg (Inner bolts)

Rod - High Strength Aluminum Silicon material. 55.855/2.1990 59.047/2.3247 1.575/0.0620 .017/.0007 55.880/2.2000 59.060/2.3252 .081/.0032

22.58/0.889

F810

7100A IH

Rod - .002" oversize OD version of 8B743A. 55.855/2.1990 59.098/2.3267 1.727/0.0680 .017/.0007 55.880/2.2000 59.111/2.3272 (@ .010" u/s) .081/.0032

22.58/0.889

F810

9100A IH

22.58/0.889

F780

7100 IH

22.58/0.889

F780

9100 IH

2.390/0.0941

21.97/0.865

F23

CH-12-1

2.260/0.0891

25.02/0.985

F23

CH-12-2

2.140/0.0841

25.02/0.985

F23

CH-12-3

Rod

8B743P Std. 01 10 20 30 40

8B743PO/S2 10 20 30 40

5C616S Std.

55.855/2.1990 55.880/2.2000

59.047/2.3247 59.060/2.3252

1.575/0.0620 .017/.0007 .081/.0032

Rod - .002" oversize OD version of 8B743P. 55.855/2.1990 59.098/2.3267 1.727/0.0680 .017/.0007 55.880/2.2000 59.111/2.3272 (@ .010" u/s) .081/.0032 Cam - engines from 1967 on. 49.497/1.9487 54.343/2.1395 1 49.522/1.9497 54.369/2.1405 2,5 49.497/1.9487 54.089/2.1295 49.522/1.9497 54.115/2.1305 3,4 49.497/1.9487 53.835/2.1195 49.522/1.9497 53.861/2.1205

100

CHEVROLET PERFORMANCE CHEVROLET PERFORMANCE ENGINE INDEX Engine Disp. 262 (4.3) ............... 265 ....................... 267 (4.4) ............... 283 ....................... 294 (4.8) ............... 302 (5.0) ............... 302 ....................... 305 (5.0) ............... 307 ....................... 323 (5.3) ............... 327 ....................... 327 ....................... Type and Location

Standard Shaft Size

ENGINE

Notation

VIN

Vortec 4800

Vortec 5300

Cyl. V8 V8 V8 V8 V8 V8 V8 V8 V8 V8 V8 V8

Max. Bearing Thickness

Housing Bore

VIN CYL

262 (4.3) 267 (4.4) 302 (5.0) 305 (5.0) 307 327 350 (5.7)

V8 V8 V8 V8 V8 V8 V8

Year Line Engine Disp. 75-76 55-57 79-82 57-67 99-05 68-69 67-67 76-02 68-73 99-05 68-69 62-67

1 2 1 2 3 1 2 1 1 3 1 2

Notation

350 (5.7) ............... 350 (5.7) ............... 350 (5.7) ............... 364 (6.0) ............... 366 (6.0) ............... 396 ....................... 396 ....................... 400 (6.6) ............... 402 ....................... 427 (7.0) ............... 454 (7.4) ............... 502 (8.2) ...............

Vertical Oil Clearance

Bore x Stroke 3.671 x 3.109 3.500 x 3.484 4.000 x 3.000 3.736 x 3.484 3.875 x 3.250 4.000 x 3.250 4.000 x 3.484

Rod - For custom engines with 1.8890" journal. 47.968/1.8885 51.181/2.0150 1.587/0.0625 .025/.0010 47.980/1.8890 51.194/2.0155 .066/.0026

Max. Overall Length

VIN

Gen III Gen III Vortec 6000

Material Code

Qty. Set

G S U

Bearing Shell No.

20.12/0.792

Rod - bearing shell does not contain dowel hole. 53.315/2.0990 56.507/2.2247 1.575/0.0620 .023/.0009 53.340/2.1000 56.520/2.2252 .076/.0030

21.25/0.837

Rod - Dowel hole in cap half. 53.315/2.0990 56.507/2.2247 53.340/2.1000 56.520/2.2252

21.25/0.837

F781

F780

F781

Rod - Bearings are .0005" thinner per half to give .001" extra clearance for standard sized cranks. 53.315/2.0990 56.507/2.2247 1.562/0.0615 .047/.0019 21.25/0.837 F780 2 53.340/2.1000 56.520/2.2252 .102/.0040

7000H IH

7001HD U/L

20.50/0.807 43.64/1.718

F780 F780

8 2

Main - Bearings are .0005" thinner per half to give .001" extra clearance for standard sized cranks. 62.189/2.4484 67.071/2.6406 2.411/0.0949 .039/.0015 20.50/0.807 F780 8 1,2,3,4 62.212/2.4493 67.094/2.6415 .100/.0039 5 (Fl)

62.174/2.4478 62.200/2.4488

1B1663H Std. 01 10

1B1663HX Std.

1B1665HD Std. 01

1B1665HXD Std.

1B663H Std. 01 09 10 11 20

2376HD U/L

Std. 01 10

2376HX U/L

2377H U/L 2378H U/L 2377HX U/L

67.071/2.6406 67.094/2.6415

2.411/0.0949 .039/.0015 .100/.0039

43.64/1.718

F780

2378HX U/L

Cam - Single piece from 5C3346C set. 1-5 47.452/1.8682 50.775/1.9990 47.478/1.8692 50.825/2.0010

1.641/0.0646 .025/.0010 .127/.0050

19.05/0.750

F830

3346

101

Engine Set No. Sizes Available

2376H U/L

Rod - Dowel hole in cap half. Bearings are .0005" thinner per half to give .001" extra clearance for standard sized cranks. 53.315/2.0990 56.507/2.2247 1.562/0.0615 .047/.0019 21.25/0.837 F781 2 2376HXD 53.340/2.1000 56.520/2.2252 .102/.0040 U/L 2.424/0.0954 .013/.0005 .073/.0029 2.424/0.0954 .013/.0005 .073/.0029

1 3 3 3 4 4 4 5 4 4 4 4

Rod - For custom engines with 1.8890" journal and 0.896" wide. Dowel hole in cap half. Bearings are .0005" thinner per half to give .001" extra clearance for standard sized cranks. 47.968/1.8885 51.181/2.0150 1.575/0.0620 .024/.0009 22.75/0.896 F781 2 7001HXD 47.981/1.8890 51.194/2.0155 .066/.0026 U/L

67.071/2.6406 67.094/2.6415 67.071/2.6406 67.094/2.6415

Year Line 67-04 97-04 01-04 99-05 66-67 65-69 70-70 70-80 70-72 66-69 70-00

TORQUE SETTINGS

Rod - For custom engines with 1.8890" journal and 0.896" wide. Dowel hole in cap half. 47.968/1.8885 51.181/2.0150 1.588/0.0625 .024/.0009 22.75/0.896 F781 47.981/1.8890 51.194/2.0155 .066/.0026

Main - 3/4 grooved set. 1,2,3,4 62.189/2.4484 62.212/2.4493 5 (Fl) 62.174/2.4478 62.200/2.4488

V8 V8 V8 V8 V8 V8 V8 V8 V8 V8 V8 V8

Connecting Rod 35 ft.lbs/48 Nm (11/32" bolts only) Connecting Rod 45 ft.lbs/61 Nm (3/8" bolts only) Main Bearing 75 ft.lbs/102 Nm

Rod - For custom engines with 1.8890" journal - bearings are .0005" thinner per half to give .001" extra clearance for standard sized cranks. 47.968/1.8885 51.181/2.0150 1.575/0.0620 .051/.0020 20.12/0.792 F781 2 7000HX 47.980/1.8890 51.194/2.0155 .091/.0036 IH

1.575/0.0620 .023/.0009 .076/.0030

Cyl.

1B663HD

1B663HX Std.

1B663HXD Std.

5M909H Std. 01 09 10 11 20

5M909HX Std.

1C3346C Std.

CHEVROLET PERFORMANCE Engine Set No. Sizes Available

Type and Location

Max. Overall Length

Material Code

Qty. Set

Bearing Shell No.

19.05/0.750

F830

3349

Cam - +0.010" O.D. all housing bores 2.0290"/2.0310". Customer to drill oil holes. 1-5 47.452/1.8682 51.537/2.0290 2.022/0.0796 .025/.0010 19.05/0.750 47.478/1.8692 51.587/2.0310 .127/.0050

F830

19536

Cam - +0.020" O.D. all housing bores 2.0390"/2.0410". Customer to drill oil holes. 47.452/1.8682 51.791/2.0390 2.149/0.0846 .025/.0010 19.05/0.750 1-5 47.478/1.8692 51.841/2.0410 .127/.0050

F830

19537

3346

Housing Bore

Max. Bearing Thickness

Vertical Oil Clearance

(Contâ&#x20AC;&#x2122;d.) 1C3349C Std.

5C004AS Std.

5C004BS Std.

5C3346C Std.

5C3349C

Cam - Single piece from 5C3349C set (#1 Cam). 47.452/1.8682 51.283/2.0190 1.895/0.0746 .025/.0010 47.478/1.8692 51.333/2.0210 .127/.0050

Cam - for blocks with all housing bores constant at 1.9990"-2.0010" (Bow tie CNC Blocks). 1-5 47.452/1.8682 50.775/1.9990 1.641/0.0646 .025/.0010 19.05/0.750 F830 47.478/1.8692 50.825/2.0010 .127/.0050 Cam 1

Std. 2,5 3,4

Standard Shaft Size

47.452/1.8682 47.478/1.8692

51.283/2.0190 51.333/2.0210

1.895/0.0746 .025/.0010 .127/.0050

19.05/0.750

F830

3349

47.452/1.8682 47.478/1.8692 47.452/1.8682 47.478/1.8692

51.029/2.0090 51.079/2.0110 50.775/1.9990 50.825/2.0010

1.768/0.0696 .025/.0010 .127/.0050 1.641/0.0646 .025/.0010 .127/.0050

19.05/0.750

F830

3347

19.05/0.750

F830

3346

ENGINE

VIN CYL

265 283 302 327

V8 V8 V8 V8

Bore x Stroke 3.750 x 3.000 3.875 x 3.000 4.000 x 3.000 4.000 x 3.250

TORQUE SETTINGS Connecting Rod 35 ft.lbs/48 Nm (11/32" bolts only) Connecting Rod 45 ft.lbs/61 Nm (3/8" bolts only) Main Bearing 60-70 ft.lbs/81-95 Nm (265, 283, 327 engines only)

Main Bearing 80 ft.lbs/108 Nm (302 engines only)

1B745H Std. 01 10

1B745HD Std.

1B745HX Std.

1B745HXD Std.

5M429H Std. 01 10

Rod - bearing shell does not contain dowel hole. 50.775/1.9990 53.967/2.1247 1.577/0.0621 .022/.0009 50.800/2.0000 53.980/2.1252 .076/.0030

21.38/0.842

F780

2370H U/L

Rod - Dowel hole in cap half. 50.775/1.9990 53.967/2.1247 50.800/2.0000 53.980/2.1252

21.38/0.842

F781

2370HD U/L

Rod - Bearings are .0005" thinner per half to give .001" extra clearance for standard sized cranks. 50.775/1.9990 53.967/2.1247 1.564/0.0616 .048/.0019 21.38/0.842 F780 2 50.800/2.0000 53.980/2.1252 .102/.0040

Std.

Main - 3/4 grooved set. 1,2,3,4 58.377/2.2983 58.402/2.2993

Std.

1C3349C Std.

5C004AS Std.

58.364/2.2978 58.390/2.2988

63.261/2.4906 63.287/2.4916

2.423/0.0954 .013/.0005 .079/.0031

20.49/0.807

F780

2372H U/L

63.261/2.4906 63.287/2.4916

2.423/0.0954 .025/.0010 .092/.0036

43.64/1.718

F780

7104H U/L

Main - Bearings are .0005" thinner per half to give .001" extra clearance for standard sized cranks. 58.377/2.2983 63.261/2.4906 2.410/0.0949 .038/.0015 20.49/0.807 F780 8 1,2,3,4 58.402/2.2993 63.287/2.4916 .104/.0041 5 (Fl)

1C3346C

2370HX U/L

Rod - Dowel hole in cap half. Bearings are .0005" thinner per half to give .001" extra clearance for standard sized cranks. 50.775/1.9990 53.967/2.1247 1.564/0.0616 21.38/0.842 F781 2 2370HXD 50.800/2.0000 53.980/2.1252 U/L

5 (Fl)

5M429HX

1.577/0.0621 .022/.0009 .076/.0030

58.364/2.2978 58.390/2.2988

2372HX U/L

63.261/2.4906 63.287/2.4916

2.410/0.0949 .050/.0020 .116/.0046

43.64/1.718

F780

7104HX U/L

Cam - Single piece from 5C3346C set. 47.452/1.8682 50.775/1.9990 1-5 47.478/1.8692 50.825/2.0010

1.641/0.0646 .025/.0010 .127/.0050

19.05/0.750

F830

3346

19.05/0.750

F830

3349

F830

19536

Cam - Single piece from 5C3349C set (#1 Cam). 47.452/1.8682 51.283/2.0190 1.895/0.0746 .025/.0010 47.478/1.8692 51.333/2.0210 .127/.0050

Cam - +0.010" O.D. all housing bores 2.0290"/2.0310". Customer to drill oil holes. 47.452/1.8682 51.537/2.0290 2.022/0.0796 .025/.0010 19.05/0.750 1-5 47.478/1.8692 51.587/2.0310 .127/.0050

102

CHEVROLET PERFORMANCE Type and Location

Standard Shaft Size

Max. Bearing Thickness

Housing Bore

Vertical Oil Clearance

Max. Overall Length

Material Code

Qty. Set

Bearing Shell No.

Engine Set No. Sizes Available

(Contâ&#x20AC;&#x2122;d.) Cam - +0.020" O.D. all housing bores 2.0390"/2.0410". Customer to drill oil holes. 47.452/1.8682 51.791/2.0390 2.149/0.0846 .025/.0010 19.05/0.750 1-5 47.478/1.8692 51.841/2.0410 .127/.0050 Cam - for 1955-63 engines only. 1 47.452/1.8682 51.283/2.0190 47.478/1.8692 51.333/2.0210 2 47.452/1.8682 51.029/2.0090 47.478/1.8692 51.079/2.0110 3,4 47.452/1.8682 50.775/1.9990 47.478/1.8692 50.825/2.0010 5 47.452/1.8682 51.029/2.0090 47.478/1.8692 51.079/2.0110

F830

5C004BS

19537

Std.

1.890/0.0744

18.92/0.745

F23

CH-4-1

1.763/0.0694

18.92/0.745

F23

CH-4-2

1.640/0.0646

18.92/0.745

F23

CH-4-3

1.763/0.0694

24.00/0.945

F23

CH-4-4

3346

Cam - for 1964-67 engines only. 47.452/1.8682 51.283/2.0190 1 47.478/1.8692 51.333/2.0210

5C287S Std.

Std.

1.895/0.0746 .025/.0010 .127/.0050

19.05/0.750

F830

3349

5C3349C Std.

2,5

47.452/1.8682 47.478/1.8692

51.029/2.0090 51.079/2.0110

1.768/0.0696 .025/.0010 .127/.0050

19.05/0.750

F830

3347

3,4

47.452/1.8682 47.478/1.8692

50.775/1.9990 50.825/2.0010

1.641/0.0646 .025/.0010 .127/.0050

19.05/0.750

F830

3346

ENGINE

VIN CYL

Bore x Stroke

294 (4.8) Vortec 4800 323 (5.3) Vortec 5300 350 (5.7) Gen III 350 (5.7) Gen III 364 (6.0) Vortec 6000

V T G S U

96mm x 83mm 96mm x 92mm 99mm x 92mm 99mm x 92mm 101.6mm x 92mm

V8 V8 V8 V8 V8

5C3346C

TORQUE SETTINGS

Connecting Rod 15 ft.lbs/20 Nm + 60 deg. Main Bearing Consult service manual

Rod 53.315/2.0990 53.340/2.1000

56.507/2.2247 56.520/2.2252

1.575/0.0620 .023/.0009 .076/.0030

21.25/0.837

Rod - Dowel hole in cap half. 53.315/2.0990 56.507/2.2247 53.340/2.1000 56.520/2.2252

1.575/0.0620 .023/.0009 .076/.0030

21.25/0.837

F780

F781

Std. 01 09 10 11 20

2376HD U/L

Std. 01 10

2376HX U/L

64.993/2.5588 65.007/2.5593

69.873/2.7509 69.887/2.7515

2.430/0.0957 .013/.0005 .065/.0026

20.45/0.805

64.993/2.5588 65.007/2.5593

69.873/2.7509 69.887/2.7515

2.430/0.0957 .013/.0005 .065/.0026

26.10/1.028

F780 F780

8 2

Main - Bearings are .0005" thinner per half to give .001" extra clearance for standard sized cranks. 64.993/2.5588 69.873/2.7509 2.417/0.0952 .038/.0015 20.45/0.805 F780 8 1,2,4,5 65.007/2.5593 69.887/2.7515 .091/.0036 3 (Fl)

7298HX U/L

7299HX U/L

Cam - 1997-2003 with 1st design # 1 & 5 housing size of 2.3260"-2.3280". 54.991/2.1650 59.080/2.3260 2.007/0.0790 16.00/0.630 1,5 55.042/2.1670 59.131/2.3280

F23

CH-10-1

2,4

58.829/2.3161 58.879/2.3181 58.580/2.3063 58.631/2.3083

2.417/0.0952 .038/.0015 .091/.0036

1B663HX Std.

1B663HXD Std.

5M7298H Std. 01 10 20

5M7298HX Std.

5C1000S Std.

1.880/0.0740

16.00/0.630

F23

CH-10-2

1.758/0.0692

16.00/0.630

F23

CH-10-3

103

1B663HD

7299H U/L

F780

54.991/2.1650 55.042/2.1670 54.991/2.1650 55.042/2.1670

69.873/2.7509 69.887/2.7515

7298H U/L

26.10/1.028

64.993/2.5588 65.007/2.5593

1B663H

2376H U/L

CHEVROLET PERFORMANCE Engine Set No. Sizes Available

Standard Shaft Size

Housing Bore

Max. Bearing Thickness

Vertical Oil Clearance

Max. Overall Length

Material Code

Qty. Set

Bearing Shell No.

Cam - 2003 on with 2nd design # 1 & 5 housing size of 2.3460"-2.3480". 54.991/2.1650 59.588/2.3460 2.260/0.0890 16.00/0.630 1,5 55.042/2.1670 59.639/2.3480

F23

CH-23-1

2,4

54.991/2.1650 54.042/2.1276

59.080/2.3260 59.131/2.3280

2.007/0.0790

16.00/0.630

F23

CH-10-1

54.991/2.1650 55.042/2.1670

58.580/2.3063 58.631/2.3083

1.758/0.0692

16.00/0.630

F23

CH-10-3

(Contâ&#x20AC;&#x2122;d.) 5C1001S Std.

Type and Location

ENGINE

VIN CYL

366 (6.0) 396 396 402 427 (7.0) 454 (7.4) 502 (8.2)

1B743H Std. 01 09 10 11 20

1B743HD Std. 01 10

1B743HX Std.

1B743HXD Std.

V8 V8 V8 V8 V8 V8 V8

Std.

5C616S Std.

Main Bearing 90-100 ft.lbs All engines except High Performance.

F780

7100H U/L

Rod - Dowel hole in cap half. 55.855/2.1990 59.047/2.3247 55.880/2.2000 59.060/2.3252

22.58/0.889

F781

7100HD U/L

1.572/0.0619 .022/.0009 .076/.0030

Rod - Bearings are .0005" thinner per half to give .001" extra clearance for standard sized cranks. 55.855/2.1990 59.047/2.3247 1.559/0.0614 .048/.0019 22.58/0.889 F780 2 55.880/2.2000 59.060/2.3252 .102/.0040

2370HX U/L

Rod - Dowel hole in cap half. Bearings are .0005" thinner per half to give .001" extra clearance for standard sized cranks. 55.855/2.1990 59.047/2.3247 1.559/0.0614 .048/.0019 22.58/0.889 F781 2 7100HXD 55.855/2.1990 59.060/2.3252 .102/.0040 U/L 74.600/2.9370 74.625/2.9380 74.600/2.9370 74.625/2.9380

2.372/0.0934 .018/.0007 .095/.0037 2.372/0.0934 .030/.0012 .105/.0041

26.46/1.042

F780

46.00/1.811

F780

Main - Bearings are .0005" thinner per half to give .001" extra clearance for standard sized cranks. 69.804/2.7482 74.600/2.9370 2.368/0.0932 .010/.0004 26.46/1.042 F780 8 1,2,3,4 69.830/2.7492 74.625/2.9380 .087/.0034 5 (Fl)

5C615S

engines only.

22.58/0.889

Main - 3/4 grooved set. 1,2,3,4 69.804/2.7482 Std. 01 09 10 11 20 69.830/2.7492 5 (Fl) 69.794/2.7478 69.820/2.7488

Std.

TORQUE SETTINGS Connecting Rod 45-55 ft.lbs Main Bearing 110-120 ft.lbs High Performance

Rod - bearing shell does not contain dowel hole. 55.855/2.1990 59.047/2.3247 1.572/0.0619 .022/.0009 55.880/2.2000 59.060/2.3252 .076/.0030

5M829H

5M829HX

Bore x Stroke 3.938 x 3.766 4.094 x 3.766 4.125 x 3.766 4.125 x 3.766 4.250 x 3.766 4.250 x 4.000 4.470 x 4.000

69.794/2.7478 69.820/2.7488

74.600/2.9370 74.625/2.9380

Cam - for 1965-66 engines only. 1 49.497/1.9487 54.343/2.1395 49.522/1.9497 54.369/2.1405 2 49.497/1.9487 54.089/2.1295 49.522/1.9497 54.115/2.1305

7102H U/L 7103H U/L 7102HX U/L

2.368/0.0932 .020/.0008 .097/.0038

46.00/1.811

F780

7103HX U/L

2.390/0.0941

21.97/0.865

F23

CH-12-1

2.260/0.0891

25.02/0.985

F23

CH-12-2

3,4

49.497/1.9487 49.522/1.9497

53.835/2.1195 53.861/2.1205

2.140/0.0841

25.02/0.985

F23

CH-12-3

49.497/1.9487 49.522/1.9497

54.089/2.1295 54.115/2.1305

2.270/0.0894

25.02/0.985

F23

CH-9-4

2.390/0.0941

21.97/0.865

F23

CH-12-1

2.260/0.0891

25.02/0.985

F23

CH-12-2

2.140/0.0841

25.02/0.985

F23

CH-12-3

Cam - for 1967-98 engines only. 1 49.497/1.9487 54.343/2.1395 49.522/1.9497 54.369/2.1405 2,5 49.497/1.9487 54.089/2.1295 49.522/1.9497 54.115/2.1305 3,4

49.497/1.9487 49.522/1.9497

53.835/2.1195 53.861/2.1205

104

CHEVROLET PERFORMANCE Type and Location

Standard Shaft Size

ENGINE

Max. Bearing Thickness

Housing Bore

VIN CYL

400 (6.6)

Vertical Oil Clearance

Bore x Stroke 4.125 x 3.750

Max. Overall Length

Qty. Set

Bearing Shell No.

TORQUE SETTINGS

21.25/0.837

Rod - Dowel hole in cap half. 53.315/2.0990 56.507/2.2247 53.340/2.1000 56.520/2.2252

21.25/0.837

F780

F781

5 (Fl)

67.257/2.6479 67.280/2.6488

72.151/2.8406 72.174/2.8415

2.421/0.0953 .018/.0007 .080/.0031

20.44/0.805

72.151/2.8406 72.174/2.8415

2.421/0.0953 .030/.0012 .092/.0036

43.64/1.718

F780 F780

8 2

Main - Bearings are .0005" thinner per half to give .001" extra clearance for standard sized cranks. 67.269/2.6484 72.151/2.8406 2.410/0.0949 .013/.0005 20.44/0.805 F780 8 1,2,3,4 67.292/2.6493 72.174/2.8415 .084/.0033 5 (Fl)

67.257/2.6479 67.280/2.6488

Std. 01 09 10 11 20

2376HD U/L

Std. 01 10

2376HX U/L

7113H U/L

7113HX U/L

2.410/0.0949 .025/.0010 .097/.0038

43.64/1.718

F780

7115HX U/L

Cam - Single piece from 5C3346C set. 1-5 47.452/1.8682 50.775/1.9990 47.478/1.8692 50.825/2.0010

1.641/0.0646 .025/.0010 .127/.0050

19.05/0.750

F830

3346

19.05/0.750

F830

Cam - +0.020" O.D. all housing bores 2.0390"/2.0410". Customer to drill oil holes. 47.452/1.8682 51.791/2.0390 2.149/0.0846 .025/.0010 19.05/0.750 1-5 47.478/1.8692 51.841/2.0410 .127/.0050

F830

3349

19536

19537

Std.

5M1038H Std. 01 10

5M1038HX Std.

1C3346C

1C3349C

5C004AS

5C004BS Std.

3346

5C3346C Std.

47.452/1.8682 47.478/1.8692

51.283/2.0190 51.333/2.0210

1.895/0.0746 .025/.0010 .127/.0050

19.05/0.750

F830

3349

47.452/1.8682 47.478/1.8692 47.452/1.8682 47.478/1.8692

51.029/2.0090 51.079/2.0110 50.775/1.9990 50.825/2.0010

1.768/0.0696 .025/.0010 .127/.0050 1.641/0.0646 .025/.0010 .127/.0050

19.05/0.750

F830

3347

19.05/0.750

F830

3346

105

1B663HXD

Std.

Cam - for blocks with all housing bores constant at 1.9990"-2.0010" (Bow tie CNC Blocks). 47.452/1.8682 50.775/1.9990 1.641/0.0646 .025/.0010 19.05/0.750 F830 1-5 47.478/1.8692 50.825/2.0010 .127/.0050

3,4

Std.

Std. F830

2,5

1B663HX

Std.

Cam - +0.010" O.D. all housing bores 2.0290"/2.0310". Customer to drill oil holes. 1-5 47.452/1.8682 51.537/2.0290 2.022/0.0796 .025/.0010 19.05/0.750 47.478/1.8692 51.587/2.0310 .127/.0050

Cam 1

1B663HD

7115H U/L

72.151/2.8406 72.174/2.8415

Cam - Single piece from 5C3349C set (#1 Cam). 47.452/1.8682 51.283/2.0190 1.895/0.0746 .025/.0010 47.478/1.8692 51.333/2.0210 .127/.0050

1B663H

2376H U/L

Rod - Dowel hole in cap half. Bearings are .0005" thinner per half to give .001" extra clearance for standard sized cranks. 53.315/2.0990 56.507/2.2247 1.562/0.0615 .047/.0019 21.25/0.837 F781 2 2376HXD 53.340/2.1000 56.520/2.2252 .102/.0040 U/L Main - 3/4 grooved set. 67.269/2.6484 1,2,3,4 67.292/2.6493

Engine Set No. Sizes Available

Connecting Rod 45 ft.lbs/61 Nm Main Bearing 75 ft.lbs/102 Nm

Rod - bearing shell does not contain dowel hole. 53.315/2.0990 56.507/2.2247 1.575/0.0620 .023/.0009 53.340/2.1000 56.520/2.2252 .076/.0030 1.575/0.0620 .023/.0009 .076/.0030

Material Code

5C3349C Std.

CHRYSLER CHRYSLER ENGINE INDEX Engine Disp.

Notation

122 1996cc (2.0)... 16V DOHC 122 1996cc (2.0)... 16V DOHC 122 1996cc (2.0)... 16V DOHC (ECF) 135 (2.2) ............... DOHC, Turbo 135 (2.2) ............... SOHC, Turbo 135 (2.2) ............... SOHC 135 (2.2) ............... SOHC 135 (2.2) ............... SOHC, Turbo 135 (2.2) ............... SOHC 135 (2.2) ............... SOHC, Turbo 135 (2.2) ............... DOHC, Turbo 135 (2.2) ............... DOHC, Turbo 2351cc (2.4)......... Mits 4G64 148 2429cc (2.4)... DOHC 148 2429cc (2.4)... DOHC 148 2429cc (2.4)... DOHC (EDZ) 152 2497cc (2.5)... Mits 6G73 152 2497cc (2.5)... Mits 6G73 152 2497cc (2.5)... Mits 6G73 (EEB) 152 2497cc (2.5)... Mits 6G73 (EEB) 153 2507cc (2.5)... SOHC, Turbo 153 2507cc (2.5)... SOHC 153 2507cc (2.5)... SOHC 156 2555cc (2.6)... Mits G54B (SOHC) 156 2555cc (2.6)... Mits G54B (SOHC) 156 2555cc (2.6)... Mits G54B (SOHC), Turbo 156 2555cc (2.6)... Mits G54B (SOHC), Turbo 167 2700cc (2.7)... 167 2700cc (2.7)... 167 2700cc (2.7)... 167 2700cc (2.7)... (EER) 181 2972cc (3.0)... Mits 6G72 181 2972cc (3.0)... Mits 6G72 181 2972cc (3.0)... Mits 6G72 197 3200cc (3.2)... SOHC (EGW) 201 (3.3) ............... OHV 201 (3.3) ............... OHV 201 (3.3) ............... OHV 201 (3.3) ............... OHV 201 (3.3) ............... OHV 201 (3.3) ............... OHV (EGB) 201 (3.3) ............... OHV (EGM) 215 3497cc (3.5)... SOHC (Aluminum Block) 215 3497cc (3.5)... SOHC (Cast Iron Block)

VIN

Cyl.

C Y Y A A B C C D E P R G B X X H N H N J K K D G H N R T U R 3 H S J 3 G R T U T G 4 F

L4 L4 L4 L4 L4 L4 L4 L4 L4 L4 L4 L4 L4 L4 L4 L4 V6 V6 V6 V6 L4 L4 L4 L4 L4 L4 L4 V6 V6 V6 V6 V6 V6 V6 V6 V6 V6 V6 V6 V6 V6 V6 V6 V6

Year Line Engine Disp. 00-00 95-99 96-98 92-93 87-89 82-82 83-84 90-90 84-89 84-88 89-89 89-90 01-05 00-02 00-02 95-98 99-00 95-00 95-98 96-98 89-92 89-89 86-93 82-82 83-85 87-87 87-89 02-06 03-06 01-01 98-06 88-00 01-05 90-91 98-01 01-03 00-00 90-06 93-96 94-95 97-97 98-00 04-06 93-97

1 1 1 2 2 2 2 2 2 2 2 2 3 4 4 4 5 5 5 5 2 2 2 6 6 6 6 7 7 7 7 9 9 9 10 11 11 11 11 11 11 11 10 12

Notation

215 3497cc (3.5)... SOHC (Aluminum Block) 215 3497cc (3.5)... SOHC (Aluminum Block) 215 3497cc (3.5)... SOHC (Aluminum Block) 215 3497cc (3.5)... SOHC (Cast Iron Block) (EGE) 225 ....................... Forged Crankshaft 225 3687cc (3.7)... Cast Crankshaft 225 3687cc (3.7)... Cast Crankshaft 225 3687cc (3.7)... Cast Crankshaft 225 3687cc (3.7)... Cast Crankshaft 225 3687cc (3.7)... Cast Crankshaft 225 3687cc (3.7)... Cast Crankshaft 225 3687cc (3.7)... Cast Crankshaft 230 (3.8) ............... OHV 318 (5.2) ............... 318 (5.2) ............... 318 (5.2) ............... 318 (5.2) ............... 318 (5.2) ............... 318 (5.2) ............... 318 (5.2) ............... 318 (5.2) ............... 345 (5.7) ............... Hemi 360 (5.9) ............... 360 (5.9) ............... 360 (5.9) ............... 361 (5.9) ............... 383 (6.4) ............... 383 (6.3) ............... 383 (6.3) ............... 383 (6.3) ............... 383 (6.3) ............... 383 (6.3) ............... 400 (6.6) ............... 400 (6.6) ............... 400 (6.6) ............... 413 ....................... 426 (7.0) ............... (Excl. Hemi) 426 (7.0) ............... Hemi 440 (7.2) ............... 440 (7.2) ............... 440 (7.2) ............... 440 (7.2) ............... 440 (7.2) ...............

VIN

Cyl.

G K M F

V6 V6 V6 V6

99-06 03-04 02-04 97-97

10 10 10 12

L6 L6 L6 L6 L6 L6 L6 L6 V6 V8 V8 V8 V8 V8 V8 V8 V8 V8 V8 V8 V8 V8 V8 V8 V8 V8 V8 V8 V8 V8 V8 V8 V8 V8 V8 V8 V8 V8 V8

60-76 78-80 78-80 81-82 81-81 81-82 83-83 83-83 91-06 75-80 78-80 81-82 81-82 81-81 81-82 81-83 83-89 05-06 74-79 71-80 78-79 61-64 59-60 59-67 68-69 68-69 70-71 70-71 72-76 74-78 75-78 59-65 63-63 64-71 66-67 68-69 68-69 70-78 70-75

8 13 13 13 13 13 13 13 11 14 14 14 14 14 14 14 14 15 17 17 17 16 18 16 16 16 16 16 16 16 16 18 18 19 18 18 18 18 18

C D E F G H K L G H J K L M N P H J K L

G H L N M N P

K L T U

Year Line

CHRYSLER MODEL INDEX Model

CID

300 - C 300 - LIMITED

413 167 383 426 440 345 215

300 - TOURING

215

3497

300M

215

3497

300M - PRO-AM EDITION

215

3497

300M - SPECIAL

215

3497

CIRRUS

122 148 152 148 152 148 152 167 197 201 215

1996 2429 2497 2429 2497 2429 2497 2700 3200

300

CIRRUS - LX CIRRUS - LXI CONCORDE

2700

3497

Liter

Description

2.7 6.3 7.0 (Excl. Hemi) 7.2 5.7 Hemi 3.5 SOHC (Aluminum Block) 3.5 SOHC (Aluminum Block) 3.5 SOHC (Aluminum Block) 3.5 SOHC (Aluminum Block) 3.5 SOHC (Aluminum Block) 2.0 16V DOHC 2.4 DOHC 2.5 Mits 6G73 2.4 DOHC 2.5 Mits 6G73 2.4 DOHC 2.5 Mits 6G73 2.7 3.2 SOHC 3.3 OHV 3.5 SOHC (Cast Iron Block)

Years 59-65 05-06 62-66 63 66-71 05-06 05-06

Model

CONCORDE - LX

2700

CONCORDE - LXI

CONQUEST CONQUEST - TSI CORDOBA

03 02-04 CORDOBA - CROWN 00 00 98-00 95-97 95-97 97 95-97 98-01 98-01 93-95 93-95

cc 3497

05-06 99-04

CID

CONCORDE - LIMITED 215

CORDOBA - LS DAYTONA

DAYTONA - IROC R/T DAYTONA - PACIFICA DAYTONA - SHELBY Z DYNASTY

106

167 201 215

3497

215

3497

215

3497

156 156 225 318 360 400 225 318 225 318 135 135 153 181 135 135 135 153 181

2555 2555 3687

3687 3687

2507 2972

Liter

Description

3.5 SOHC (Aluminum Block) 2.7 3.3 OHV 3.5 SOHC (Cast Iron Block) 3.5 SOHC (Aluminum Block) 3.5 SOHC (Cast Iron Block) 2.6 Mits G54B (SOHC) 2.6 Mits G54B (SOHC) 3.7 Cast Crankshaft 5.2 5.9 6.6 3.7 Cast Crankshaft 5.2 3.7 Cast Crankshaft 5.2 2.2 DOHC 2.2 SOHC 2.5 SOHC 3.0 Mits 6G72 2.2 DOHC 2.2 SOHC 2.2 SOHC 2.5 SOHC 3.0 Mits 6G72

Years 02-04 02-04 96 96-97 02-04 96-97 87 88-89 80-83 75-83 75-79 75-78 80 80 80-82 81-82 93 84-89 87-93 90-93 92 87-88 87 88-92 89-90

CHRYSLER CHRYSLER MODEL INDEX (Cont’d.) Model DYNASTY E CLASS EXECUTIVE LIMOUSINE EXECUTIVE SEDAN FIFTH AVENUE GRAND VOYAGER GRAND VOYAGER SE IMPERIAL

IMPERIAL - CROWN IMPERIAL - LEBARON INTREPID

INTREPID - ES

CID 201 135 156

2555

Model

CID

3.3 OHV 2.2 SOHC 2.6 Mits G54B (SOHC)

91-93 83-84 83-84

NEW YORKER

318 360 426 440

5.2 5.9 7.0 (Excl. Hemi) 7.2

79-82 79-80 63 66-74

2.6 2.6 3.7 5.2 3.0 3.3

Mits G54B (SOHC) Mits G54B (SOHC) Cast Crankshaft

85 83-84 83 83-89 00 00

NEW YORKER BROUGHAM

360 400 440

5.9 6.6 7.2

77-78 75-78 72-78

201 230

3.3 OHV 3.8 OHV

90-93 91-93

Mits 6G72 OHV OHV OHV

00 00 90-91 91-93 81-83 66-67 68-70 68-75 98-04 98-01 93-97 03-04

NEW YORKER LANDAU

3.0 Mits 6G72 3.3 OHV

88-89 90

3.3 OHV

90-93

3497

2.2 3.7 5.2 5.9 5.9 6.3 6.6 7.0 7.2 5.9 6.3 6.6 7.2 5.9 6.6 7.2 3.5

88 79-81 79-81 71-80 61-64 65-71 73-78 63 66-78 74-76 68-71 72-76 68-76 72 72 72 04-06

156 156 225 318 181 201

2555 2555 3687

181 201 201 230 318 440 440 440 167 197 201 215

2972

3497

3.0 3.3 3.3 3.8 5.2 7.2 7.2 7.2 2.7 3.2 3.3 3.5

215

3497

3.5

201 215

3497

3.3 3.5

135 153 LASER - XE 135 153 LEBARON 135 153 156 225 181 318 360 LEBARON - GTC 135 135 153 181 LEBARON - GTS 135 153 LEBARON - LANDAU 153 181 LEBARON - LE 153 181 LEBARON - LX 181 LEBARON - LX SEDAN 181 LEBARON MEDALLION 135 156 225 318 360 LEBARON - S 225 318 LEBARON - SALON 225 318 360 LEBARON - SEDAN 153 181 LEBARON - SPECIAL 225 318 LEBARON - TOWN & COUNTRY 225 LHS 215

2972

2700 3200

LASER

215 NEW YORKER

Liter

135 153 156 225 181 215

2507 2507 2507 2555 3687 2972

2507 2972 2507 2507 2972 2507 2972 2972 2972 2555 3687 3687 3687 2507 2972 3687 3687 3497 3497 2507 2555 3687 2972 3497

2.2 2.5 2.2 2.5 2.2 2.5 2.6 3.7 3.0 5.2 5.9 2.2 2.2 2.5 3.0 2.2 2.5 2.5 3.0 2.5 3.0 3.0 3.0 2.2 2.6 3.7 5.2 5.9 3.7 5.2 3.7 5.2 5.9 2.5 3.0 3.7 5.2

Description

Mits 6G72 OHV

SOHC OHV SOHC (Aluminum Block) SOHC (Cast Iron Block) OHV SOHC (Cast Iron Block) SOHC SOHC SOHC SOHC SOHC SOHC Mits G54B (SOHC) Cast Crankshaft Mits 6G72 DOHC SOHC SOHC Mits 6G72 SOHC SOHC SOHC Mits 6G72 SOHC Mits 6G72 Mits 6G72 Mits 6G72 SOHC Mits G54B (SOHC) Cast Crankshaft Cast Crankshaft Cast Crankshaft SOHC Mits 6G72 Cast Crankshaft

3.7 Cast Crankshaft 3.5 SOHC (Aluminum Block) 3.5 SOHC (Cast Iron Block) 2.2 SOHC 2.5 SOHC 2.6 Mits G54B (SOHC) 3.7 Cast Crankshaft 3.0 Mits 6G72 3.5 SOHC (Cast Iron Block)

Years

NEW YORKER FIFTH AVENUE

NEW YORKER SALON NEW YORKER TURBO NEWPORT

84-86 86 84-86 86 82-89 86-93 82-85 78-81 90-93 77-81 78-79 89 90 89-92 91-95 85-89 86-89 92 92-94 93 93-94 91-93 92 82 82 78-81 77-81 78-79 78 78 79-81 79-81 79 92 92 81 81

201

PACIFICA PACIFICA - LIMITED

230 215

3497

3.8 3.5

PACIFICA - TOURING

215

3497

3.5

PROWLER

215

3497

3.5

PT CRUISER SARATOGA SEBRING

148 383

2429

2.4 6.3 2.4 2.4 2.7 3.0 2.7 2.4 2.5 2.4 2.5 2.7 2.0 2.5 2.5 2.7 2.7 2.2 3.0 2.2 2.5 2.6 3.7 3.3 3.8 5.2 5.9 5.9 6.3 6.6 7.0 7.2

NEWPORT - CUSTOM

NEWPORT - ROYAL

SEBRING - GTC SEBRING - JX SEBRING - JXI SEBRING - LIMITED SEBRING - LX SEBRING - LXI SEBRING - TOURING SEBRING - TSI TC MASERATI TOWN & COUNTRY

81 99-01 94-97 83-87 86-87 83-85 82 88-89 94-96

2972

Liter

135 225 318 360 361 383 400 426 440 360 383 400 440 360 400 440 215

93-97 95 95-96

181 201

TOWN & COUNTRY LIMITED TOWN & COUNTRY LX

107

148 167 181 167 148 152 148 152 167 122 152 152 167 167 135 181 135 153 156 225 201 230 318 360 361 383 400 426 440

3687

2351 2429 2700 2972 2700 2429 2497 2429 2497 2700 1996 2497 2497 2700 2700 2972 2507 2555 3687

Description

SOHC Cast Crankshaft

(Excl. Hemi)

SOHC (Aluminum Block) OHV SOHC (Aluminum Block) SOHC (Aluminum Block) SOHC (Aluminum Block) DOHC Mits 4G64 DOHC Mits 6G72 DOHC Mits 6G73 DOHC Mits 6G73 16V DOHC Mits 6G73 Mits 6G73 DOHC Mits 6G72 SOHC SOHC Mits G54B (SOHC) Cast Crankshaft OHV OHV

(Excl. Hemi)

Years

05-06 06 06 01-02 01-02 59-60 01-05 01-02 01-05 01-05 06 96-98 96-00 97-98 96-00 06 95-99 95-00 95-00 06 06 89-90 90-91 82-88 86-88 82-85 78-81 90-06 94-05 78-81 78-79 61-64 59-71 72-77 63 68-77

230

3.8 OHV

201 230

3.3 OHV 3.8 OHV

96-06 96-98

CHRYSLER CHRYSLER MODEL INDEX (Contâ&#x20AC;&#x2122;d.) Model

CID

TOWN & COUNTRY LXI TOWN & COUNTRY SX TOWN & COUNTRY TOURING VOYAGER

Engine Set No. Sizes Available

Liter

Description

Years

Model VOYAGER

201 230

3.3 OHV 3.8 OHV

01 96-98

201 230

3.3 OHV 3.8 OHV

97-98 97-98

3.8 OHV 2.4 DOHC

06 00-02

230 148

Type and Location

2429

Standard Shaft Size

Housing Bore

VOYAGER - LX VOYAGER - SE WINDSOR

Max. Bearing Thickness

Vertical Oil Clearance

ENGINE

VIN CYL

Bore x Stroke

122 1996cc (2.0) 16V DOHC 122 1996cc (2.0) 16V DOHC 122 1996cc (2.0) 16V DOHC (ECF)

C Y Y

87.5mm x 83mm 87.5mm x 83mm 87.5mm x 83mm

L4 L4 L4

CID

Liter

181 201 201 201 383

2972

3.0 3.3 3.3 3.3 6.3

Max. Overall Length

Description

Years

Mits 6G72 OHV OHV OHV

Material Code

Qty. Set

00 00-03 01 00 59-61

Bearing Shell No.

TORQUE SETTINGS Connecting Rod 20 ft.lbs + 90 deg Main Bearing 22 ft.lbs M8 bolts with bedplate Main Bearing 30 ft.lbs + 90 deg M10 bolts only Main Bearing 40 ft.lbs M10 bolts with bedplate Main Bearing 60 ft.lbs M11 bolts only

Rod

4B1635P

47.991/1.8894 48.006/1.8900

20.50/0.807

F780

7171 IH

20.50/0.807

F780

9091 IH

1.986/0.0782 .018/.0007 .071/.0028

19.96/0.786

F780

4342 U/L

3 (Fl)

51.991/2.0469 55.997/2.2046 1.986/0.0782 .018/.0007 52.006/2.0475 56.007/2.2050 .071/.0028 Overflange length remains constant for standards and undersizes.

26.26/1.034

F780

4343 U/L

Main - .002" oversize OD version of 5M2028P. 51.991/2.0469 56.048/2.2066 2.011/0.0792 .018/.0007 1,2,4,5 52.006/2.0475 56.058/2.2070 (@ STD u/s) .071/.0028

19.96/0.786

F780

9093 U/L

3 (Fl)

26.26/1.034

F780

9094 U/L

Main - 1995 engines only (opposite tang position in lower half). 51.991/2.0469 55.997/2.2046 1.986/0.0782 .018/.0007 1,2,4,5 52.006/2.0475 56.007/2.2050 .071/.0028

19.96/0.786

F780

4372 L

1,2,4,5

51.991/2.0469 52.006/2.0475

55.997/2.2046 56.007/2.2050

1.986/0.0782 .018/.0007 .072/.0028

19.96/0.786

F780

4342 U

3 (Fl)

51.991/2.0469 52.006/2.0475

55.997/2.2046 56.007/2.2050

1.986/0.0782 .018/.0007 .072/.0028

26.26/1.034

F780

4373 L

3 (Fl)

51.991/2.0469 52.006/2.0475

55.997/2.2046 56.007/2.2050

1.986/0.0782 .018/.0007 .072/.0028

26.26/1.034

F780

4343 U

Std. .25 .50 .75 1.0

4B1635PO/S2 Std. .25 .50 .75

5M2028P Std. .25 .50 .75

5M2028PO/S2 .25 .50 .75

50.991/2.0075 51.006/2.0081

1.490/0.0587 .005/.0002 .061/.0024

Rod - .002" oversize OD version of 4B1635P. 47.991/1.8894 51.041/2.0095 1.640/0.0646 .005/.0002 48.006/1.8900 51.056/2.0101 (@ .25 mm u/s) .061/.0024 Main - suits engines from 1996 on. 1,2,4,5 51.991/2.0469 55.997/2.2046 52.006/2.0475 56.007/2.2050

51.991/2.0469 56.048/2.2066 2.011/0.0792 .018/.0007 52.006/2.0475 56.058/2.2070 (@ STD u/s) .071/.0028 Overflange length remains constant for standards and undersizes.

5M4372P Std. .25 .50 .75

ENGINE

VIN CYL

Bore x Stroke

135 (2.2) DOHC Turbo 135 (2.2) SOHC Turbo 135 (2.2) SOHC 135 (2.2) SOHC 135 (2.2) SOHC Turbo 135 (2.2) SOHC 135 (2.2) SOHC Turbo 135 (2.2) DOHC Turbo 135 (2.2) DOHC Turbo 153 2507cc (2.5) SOHC Turbo 153 2507cc (2.5) SOHC 153 2507cc (2.5) SOHC

A A B C C D E P R J K K

87.5mm x 92mm 87.5mm x 92mm 87.5mm x 92mm 87.5mm x 92mm 87.5mm x 92mm 87.5mm x 92mm 87.5mm x 92mm 87.5mm x 92mm 87.5mm x 92mm 87.5mm x 104mm 87.50 x 104mm 87.5mm x 104mm

L4 L4 L4 L4 L4 L4 L4 L4 L4 L4 L4 L4

TORQUE SETTINGS Connecting Rod 40 ft.lbs/54 Nm + 1/4 turn Main Bearing 30 ft.lbs/41 Nm + 1/4 turn

Rod

4B1269P Std. 10 20 30 40

49.980/1.9677 50.005/1.9687

52.989/2.0862 53.007/2.0869

1.483/0.0584 .018/.0007 .087/.0034

108

20.04/0.789

F780

4360 IH

CHRYSLER Type and Location

Standard Shaft Size

Max. Bearing Thickness

Housing Bore

Vertical Oil Clearance

Max. Overall Length

Material Code

Qty. Set

Bearing Shell No.

Engine Set No. Sizes Available

(Contâ&#x20AC;&#x2122;d.) Main - All engines 59.987/2.3617 1,2,4,5 60.013/2.3627

63.990/2.5193 64.008/2.5200

1.976/0.0778 .025/.0010 .095/.0037

21.46/0.845

59.987/2.3617 63.990/2.5193 1.976/0.0778 .025/.0010 60.013/2.3627 64.008/2.5200 .095/.0037 Overflange length remains constant for standard and undersizes.

27.86/1.097

3 (Fl)

F780 F780

8 2

4358 IH

59.987/2.3617 63.990/2.5193 60.013/2.3627 64.008/2.5200 Stock not available from fee warehouses.

.010" u/s shaft .020" u/s shaft .030" u/s shaft .040" u/s shaft

1.976/0.0778 .025/.0010 .095/.0037

F780

5M4369P 10 20 30 40

4369 IH

* DIMENSIONAL INFORMATION FOR 5M4369P Overall Width (Nominal) Increase in Width 1.107" +0.010" 1.107" +0.010" 1.107" +0.010" 1.107" +0.010"

Balance Shaft - 2.5L engines only (semi-finished) 42.012/1.6540 45.350/1.7854 2.032/0.0800 (Nominal) 45.410/1.7878 (Semi) Balance Shaft - 2.2L engines only. 1 42.670/1.6799 45.970/1.8098 42.695/1.6809 46.030/1.8122 2 19.670/0.7744 22.970/0.9043 19.693/0.7753 23.030/0.9067

28.12/1.107

5M1533P Std. 10 20 30 40

4359 IH

Main - optional set to 5M1533P with +0.010" overflange length increase. *See below for dimensional information. 59.987/2.3617 63.990/2.5193 1.976/0.0778 .025/.0010 21.46/0.845 F780 8 4358 1,2,4,5 60.013/2.3627 64.008/2.5200 .095/.0037 IH 3 (Fl)

22.10/0.870

F23

PDG-29-1

2BS1403S Semi

1.633/0.0643

19.05/0.750

F23

PDG-26-1

1.633/0.0643

21.08/0.830

F23

PDG-26-2

2C026S Std.

ENGINE

VIN CYL

Bore x Stroke

2351cc (2.4) Mits 4G64

86.5mm x 100mm

TORQUE SETTINGS

Rod

Main 1-5

44.981/1.7709 44.996/1.7715

47.998/1.8897 48.019/1.8905

1.493/0.0588 .016/.0006 .078/.0031

21.10/0.831

56.985/2.2435 57.000/2.2441

61.000/2.4016 61.021/2.4024

1.990/0.0783 .020/.0008 .082/.0032

21.00/0.827

F810

4B1185

1185A IH

Std. .25 .50 .75 1.0

1186A U/L

Std. .25 .50 .75 1.0

5M1219

Thrust 63.100/2.4842 80.500/3.1693 63.350/2.4941 80.750/3.1791 (I.D.) (O.D.) Note : Set contains two pieces. Required with 5M1219 main set.

2.11/0.083

ENGINE

VIN CYL

Bore x Stroke

148 2429cc (2.4) DOHC 148 2429cc (2.4) DOHC 148 2429cc (2.4) DOHC (EDZ)

B X X

87.5mm x 101mm 87.5mm x 101mm 87.5mm x 101mm

L4 L4 L4

F250

1219T IH

1T1219 Std.

TORQUE SETTINGS

Connecting Rod 21 ft.lbs/28 Nm + 90 deg turn Main Bearing 25 ft.lbs/34 Nm (M8 Bedplate Bolts) Main Bearing 30 ft.lbs/41 Nm + 90 deg turn (M11 Main Cap Bolts)

Rod 50.007/1.9688 50.025/1.9695

52.995/2.0864 53.007/2.0869

1.483/0.0584 .004/.0002 .060/.0024

Rod - .002" oversize OD version of 4B4565P. 50.007/1.9688 53.045/2.0884 1.633/0.0643 .004/.0002 50.025/1.9695 53.057/2.0889 (@ 0.25 mm u/s) .060/.0024 Main 1,2,4,5

59.992/2.3619 64.000/2.5197 1.984/0.0781 60.007/2.3625 64.013/2.5202 3 (Fl) 59.992/2.3619 64.000/2.5197 1.984/0.0781 60.007/2.3625 64.013/2.5202 Overflange length remains constant for standard and undersizes.

.018/.0007 .058/.0023 .017/.0007 .058/.0023

109

20.13/0.793

21.62/0.851 27.86/1.097

F780

F780 F780

8 2

4565 IH 9096 IH 7312 IH 7313 U/L

4B4565P Std. .25 .50 .75 1.0

4B4565PO/S2 .25 .50 .75 1.0

5M7313P Std. .25 .50 .75

CHRYSLER Engine Set No. Sizes Available

Type and Location

Max. Overall Length

Material Code

Qty. Set

Bearing Shell No.

Main - .002" oversize OD version of 5M7313P. 50.992/2.0076 64.051/2.5217 2.134/0.0840 .018/.0007 1,2,4,5 60.007/2.3625 64.063/2.5222 (@ 0.25mm u/s) .058/.0023

21.62/0.851

F780

9097 IH

3 (Fl)

27.86/1.097

F780

9098 U/L

Standard Shaft Size

Housing Bore

Max. Bearing Thickness

Vertical Oil Clearance

(Contâ&#x20AC;&#x2122;d.)

5M7313PO/S2 .25 .50 .75

59.992/2.3619 64.051/2.5217 2.134/0.0840 .017/.0007 60.007/2.3625 64.063/2.5222 (@ 0.25mm u/s) .058/.0023 Overflange length remains constant for standard and undersizes.

ENGINE

VIN CYL

Bore x Stroke

152 2497cc (2.5) Mits 6G73 152 2497cc (2.5) Mits 6G73 152 2497cc (2.5) Mits 6G73 (EEB) 152 2497cc (2.5) Mits 6G73 (EEB)

H N H N

83.5mm x 76mm 83.5mm x 76mm 83.5mm x 76mm 83.5mm x 76mm

V6 V6 V6 V6

TORQUE SETTINGS Connecting Rod 38 ft.lbs/52 Nm Main Bearings 60 ft.lbs/81 Nm

Rod

6B1140 Std. .25 .50 .75 1.0

4M1149

Main 1-4

Std. .25 .50 .75 1.0

2T1149 Std.

49.972/1.9674 50.000/1.9685

53.000/2.0866 53.020/2.0874

1.493/0.0588 .015/.0006 .089/.0035

15.50/0.610

F810

1140A IH

59.980/2.3614 60.000/2.3622

64.000/2.5197 64.020/2.5205

1.988/0.0783 .020/.0008 .086/.0034

18.13/0.714

F810

1149A U/L

1.98/0.078

F817

1149T U/L

Thrust 3

66.000/2.5984 77.450/3.0492 66.250/2.6083 77.700/3.0590 Note: Set includes 4 pieces, use on No. 3 position. Required with 4M1149 main set.

ENGINE

VIN CYL

156 2555cc (2.6) Mits G54B (SOHC) 156 2555cc (2.6) Mits G54B (SOHC) 156 2555cc (2.6) Mits G54B (SOHC) Turbo 156 2555cc (2.6) Mits G54B (SOHC) Turbo

Bore x Stroke

91.1mm x 98mm

TORQUE SETTINGS Connecting Rod 32-35 ft.lbs/44-47 Nm Main Bearing 55-61 ft.lbs/74-83 Nm

Rod

4B1136

52.973/2.0855 53.000/2.0866

Std. .25 .50 .75 1.0

56.007/2.2050 56.021/2.2055

1.493/0.0588 .021/.0008 .076/.0030

Main - for engines with 60mm/2.3622" main journal diameter only. 1,2,4,5 59.973/2.3611 64.000/2.5197 1.990/0.0783 .020/.0008 Std. .25 .50 .75 1.0 60.000/2.3622 64.020/2.5205 .081/.0032 1,2,4,5 59.973/2.3611 64.000/2.5197 1.990/0.0783 .020/.0008 60.000/2.3622 64.020/2.5205 .081/.0032 3 (Fl) 59.973/2.3611 64.000/2.5197 1.990/0.0783 .020/.0008 60.000/2.3622 64.020/2.5205 .081/.0032 Overflange length remains constant for standard and undersizes.

5M1139

5M1143 .25 .50 .75 1.0

25.13/0.989

F820

1136AL IH

25.13/0.989

F820

25.13/0.989

F820

30.95/1.219

F820

1134AL U 1139AL L 1135AL IH

Main - optional set to 5M1139 with overflange width increases for undersizes. *See below for dimensional information. 59.973/2.3611 64.000/2.5197 1.990/0.0783 .020/.0008 25.13/0.989 F820 4 1134AL 1,2,4,5 60.000/2.3622 64.020/2.5205 .081/.0032 U 1,2,4,5 3 (Fl)

59.973/2.3611 60.000/2.3622 59.973/2.3611 60.000/2.3622

64.000/2.5197 64.020/2.5205 64.000/2.5197 64.020/2.5205

1.990/0.0783 .020/.0008 .081/.0032 1.990/0.0783 .020/.0008 .081/.0032

25.13/0.989

F820

(See Table)

F820

110

1139AL L 1143AL IH

CHRYSLER Type and Location

Standard Shaft Size

Max. Bearing Thickness

Housing Bore

Vertical Oil Clearance

Max. Overall Length

Material Code

Qty. Set

Bearing Shell No.

Engine Set No. Sizes Available

(Contâ&#x20AC;&#x2122;d.) Balance Shaft - repair bushing. Single piece +.173" OD. Line bore housing to 1.985"-1.986". 43.009/1.6933 50.419/1.9850 3.680/0.1450 .025/.0010 20.24/0.797 F23 43.025/1.6939 50.444/1.9860 .089/.0035 Balance Shaft - with grooved #2 & #3 position bearings. 2,3 43.009/1.6933 46.030/1.8122 1.478/0.0582 43.025/1.6939 46.050/1.8130 1 22.959/0.9039 26.000/1.0236 1.505/0.0593 22.980/0.9047 26.021/1.0244

8288 OOD

F818

8288

18.00/0.709

F818

8289

Balance Shaft - without grooved #2 & #3 position bearings. 43.009/1.6933 46.030/1.8122 1.478/0.0582 2,3 43.025/1.6939 46.050/1.8130

20.24/0.797

F818

8369

18.00/0.709

F818

8289

26.000/1.0236 26.021/1.0244

3BS8288 Std. .25

3BS8369 Std. .25

1.505/0.0593

Cam Tower - Includes oil holes for upper position and wide bearings for #1 position.Line bore tunnel to 1.4966"/1.4976" (38.014/38.038mm).Set includes modified upper rear main bearing.) 1 33.924/1.3356 38.014/1.4966 2.006/0.0790 .041/.0016 22.96/0.904 F23 2 33.950/1.3366 38.038/1.4976 .104/.0041 2,3,4,5 33.924/1.3356 38.014/1.4966 2.006/0.0790 .041/.0016 20.14/0.793 F23 4 33.950/1.3366 38.038/1.4976 .104/.0041 2,3,4,5 33.924/1.3356 38.014/1.4966 2.006/0.0790 .041/.0016 20.14/0.793 F23 4 33.950/1.3366 38.038/1.4976 .104/.0041

ENGINE

VIN CYL

Bore x Stroke

167 2700cc (2.7) 167 2700cc (2.7) 167 2700cc (2.7) 167 2700cc (2.7) (EER)

R T U R

86mm x 78.5mm 86mm x 78.5mm 86mm x 78.5mm 86mm x 78.5mm

V6 V6 V6 V6

1BS8288 Std.

20.24/0.797

22.959/0.9039 22.980/0.9047

SC762 U/L SC761 U SC760 L

5SC761 Std.

TORQUE SETTINGS

Connecting Rod 20 ft.lbs + 90 deg Main Bearing 15 ft.lbs + 90 deg Inner Main Bearing 20 ft.lbs 90 deg Outer

Rod - High Strength Aluminum Silicon material. 53.492/2.1060 56.493/2.2241 1.487/0.0585 .009/.0004 53.510/2.1067 56.507/2.2247 .067/.0026

17.38/0.684

Rod - .002" oversize OD version of 6B7170A. 53.492/2.1060 56.543/2.2261 1.637/0.0644 .009/.0004 53.510/2.1067 56.557/2.2266 (@ 0.25mm u/s) .067/.0026

17.38/0.684

F810

7170A IH 9101A IH

6B7170A Std. .25 .50 .75 1.0

6B7170AO/S2 .25 .50 .75 1.0

Rod 53.492/2.1060 53.510/2.1067 To be superceded by 6B7170A.

56.493/2.2241 56.507/2.2247

1.487/0.0585 .009/.0004 .067/.0026

Rod - .002" oversize OD version of 6B7170P. 53.492/2.1060 56.543/2.2261 1.637/0.0644 .009/.0004 53.510/2.1067 56.557/2.2266 (@ 0.25mm u/s) .067/.0026 To be superceded by 6B7170AO/S2. Main 1-4

63.492/2.4997 63.510/2.5004

68.993/2.7163 69.010/2.7169

17.38/0.684

2.740/0.1079 .003/.0001 .064/.0025

18.70/0.736

71.100/2.7992 90.190/3.5508 71.350/2.8090 90.440/3.5606 (OD) (ID) Note : Set includes two pieces, use on No. 3 position. Required with 4M7172P main set.

2.06/0.081

F780

7170 IH

9101 IH

6B7170P Std. .25 .50 .75 1.0

6B7170PO/S2 .25 .50 .75 1.0

4M7172P

7172 U/L

Std. .25 .50 .75 1.0

7172T U

Std. +.25

Thrust

ENGINE

VIN CYL

225 Forged Crankshaft

Bore x Stroke 3.40 x 4.13

F817

1T7172

TORQUE SETTINGS

Connecting Rod 45 ft.lbs/61 Nm Main Bearing 85 ft.lbs/115 Nm

Rod 55.537/2.1865 55.563/2.1875

58.737/2.3125 58.750/2.3130

1.578/0.0621 .018/.0007 .073/.0029

111

25.14/0.990

F820

4601AL IH

6B606AL Std. 10 20 30 40

CHRYSLER Engine Set No. Sizes Available

Type and Location

Standard Shaft Size

Max. Bearing Thickness

Housing Bore

Vertical Oil Clearance

Max. Overall Length

Material Code

Qty. Set

Bearing Shell No.

(Contâ&#x20AC;&#x2122;d.)

4M4625AL 20

Main - Alternate set to 4M517AL with +.010" overflange width increase. *See below for dimensional information. 69.837/2.7495 74.740/2.9425 2.428/0.0956 .021/.0008 26.39/1.039 F820 6 4602AL 1,2,4 69.863/2.7505 74.752/2.9430 .075/.0030 U/L 3 (F)

69.837/2.7495 74.740/2.9425 69.863/2.7505 74.752/2.9430 Stock not available from fee warehouses.

2.432/0.0957 .016/.0006 .067/.0026

32.13/1.265

F820

4625AL U/L

* DIMENSIONAL INFORMATION FOR 4M4625AL Overall Width (Nominal) Increase in Width .020" u/s shaft 1.265" +0.010"

4M517AL

Main 1,2,4

2.428/0.0956 .021/.0008 .075/.0030

26.39/1.039

F820

4602AL U/L

69.837/2.7495 74.740/2.9425 2.432/0.0957 .016/.0006 69.863/2.7505 74.752/2.9430 .067/.0026 Overflange length remains constant for standard and undersizes.

31.88/1.255

F820

4605AL U/L

Std. 10 20 30 40

69.837/2.7495 69.863/2.7505

74.740/2.9425 74.752/2.9430

3 (Fl)

4C874S

Cam 1

Std. 2 3 4

RB2134Y Semi

50.750/1.9980 50.775/1.9990

54.090/2.1295 54.115/2.1305

1.638/0.0645

23.49/0.925

F23

PD-18-1

50.343/1.9820 50.368/1.9830 49.962/1.9670 49.987/1.9680 49.555/1.9510 49.581/1.9520

53.683/2.1135 53.708/2.1145 53.302/2.0985 53.327/2.0995 52.895/2.0825 52.921/2.0835

1.638/0.0645

19.18/0.755

F23

PD-12-2

1.638/0.0645

19.18/0.755

F23

PD-13-3

1.638/0.0645

19.18/0.755

F23

PD-13-4

30.48/1.200

F100

2134Y

Small End - semi finished - single pieces. 25.009/0.9846 26.378/1.0385 (Finish ID Bore Size) (Nominal)

ENGINE

VIN CYL

Bore x Stroke

181 2972cc (3.0) Mits 6G72 181 2972cc (3.0) Mits 6G72 181 2972cc (3.0) Mits 6G72

3 H S

91.2mm x 76mm 91.2mm x 76mm 91.2mm x 76mm

V6 V6 V6

TORQUE SETTINGS Connecting Rod 38 ft.lbs/52 Nm Main Bearing 60 ft.lbs/81 Nm

Rod

6B1140

49.972/1.9674 50.000/1.9685

53.000/2.0866 53.020/2.0874

1.493/0.0588 .015/.0006 .089/.0035

15.50/0.610

F810

1140A IH

59.980/2.3614 60.000/2.3622

64.000/2.5197 64.020/2.5205

1.988/0.0783 .020/.0008 .086/.0034

18.13/0.714

F810

1149A U/L

66.000/2.5984 77.450/3.0492 1.98/0.078 66.250/2.6083 77.700/3.0590 Note: Thrust set includes 4 pieces, use on No. 3 position. Required with 4M1149 main set.

F817

1149T U/L

Std. .25 .50 .75 1.0

4M1149

Main 1-4

Std. .25 .50 .75 1.0

2T1149 Std.

Thrust 3

ENGINE

VIN CYL

Bore x Stroke

197 3200cc (3.2) SOHC (EGW) 215 3497cc (3.5) SOHC (Aluminum Block) 215 3497cc (3.5) SOHC (Aluminum Block) 215 3497cc (3.5) SOHC (Aluminum Block) 215 3497cc (3.5) SOHC (Aluminum Block)

92mm x 81mm

96.01mm x 81mm

6B1410A Std. .25 .50 .75 1.0

TORQUE SETTINGS Connecting Rod 40 ft.lbs + 90 deg Main Bearing 15 ft.lbs + 90 deg Inner (3.2L engines) Main Bearing 20 ft.lbs + 90 deg Outer (3.2L engines) Main Bearing 15 ft.lbs + 90 deg 3.5L engines Main Bearing 20 ft.lbs + 90 deg 3.5L engines (Tray) Main Bearing 21 ft.lbs 3.5L engines (Side Bolts)

Rod - High Strength Aluminum Silicon material. 57.988/2.2830 60.993/2.4013 1.483/0.0584 .013/.0005 58.014/2.2840 61.006/2.4018 .068/.0027

112

16.54/0.651

F810

1470A IH

CHRYSLER Type and Location

Standard Shaft Size

Max. Bearing Thickness

Housing Bore

Vertical Oil Clearance

Max. Overall Length

Material Code

Qty. Set

Bearing Shell No.

Engine Set No. Sizes Available

(Contâ&#x20AC;&#x2122;d.) Main 1-4

63.988/2.5192 64.013/2.5202

68.989/2.7161 69.009/2.7169

2.485/0.0978 .018/.0007 .056/.0022

17.58/0.692

F780

4M7182P

7182 U/L

Std. .25 .50 .75 1.0

7172T U

Std. +.25

Thrust 71.100/2.7992 90.190/3.5508 2.06/0.081 71.350/2.8090 90.440/3.5606 (ID) (OD) Note: Thrust set includes 2 pieces, use on No. 2 position. Required with 4M7182P main set.

ENGINE

VIN CYL

Bore x Stroke

201 (3.3) OHV 201 (3.3) OHV 201 (3.3) OHV 201 (3.3) OHV 201 (3.3) OHV 201 (3.3) OHV (EGB) 201 (3.3) OHV (EGM) 230 (3.8) OHV

3 G R T U T G L

93mm x 81mm 93mm x 81mm 93mm x 81mm 93mm x 81mm 93mm x 81mm 93mm x 81mm 93mm x 81mm 96mm x 87mm

V6 V6 V6 V6 V6 V6 V6 V6

Rod - High Strength Aluminum Silicon material. 57.988/2.2830 60.993/2.4013 1.483/0.0584 .013/.0005 58.014/2.2840 61.006/2.4018 .068/.0027

F817

1T7172

TORQUE SETTINGS

Connecting Rod 40 ft.lbs/54 Nm + 1/4 turn Main Bearing 30 ft.lbs/41 Nm + 1/4 turn

16.54/0.651

F810

1470A IH

6B1410A Std. .25 .50 .75 1.0

Main - Alternate set to 4M1946P with +0.010" overflange length increase. *See below for dimensional information. 63.988/2.5192 67.993/2.6769 1.983/0.0781 .013/.0005 24.49/0.964 F780 6 1948 1,3,4 64.013/2.5202 68.014/2.6777 .051/.0020 U/L 2 (Fl)

63.988/2.5192 67.993/2.6769 64.013/2.5202 68.014/2.6777 To be discontinued once stock is exhausted.

1.983/0.0781 .013/.0005 .051/.0020

24.13/0.950

F780

4M1958P .25 .50 .75 1.0

1958 U/L

* DIMENSIONAL INFORMATION FOR 4M1958P Overall Width (Nominal) Increase in Width 0.25 mm u/s shaft 0.950" +0.010" 0.50 mm u/s shaft 0.950" +0.010" 0.75 mm u/s shaft 0.950" +0.010" 1.00 mm u/s shaft 0.950" +0.010" Main - Supercedes 4M1946P. High Strength Aluminum Silicon material. 1,2,4 63.988/2.5192 67.993/2.6769 1.983/0.0781 .013/.0005 24.49/0.964 64.013/2.5202 68.014/2.6777 .051/.0020

F810

2 (Fl)

23.88/0.940

F810

7278A U/L

Cam - supercedes 4C1405S. Set has OD groove on #2 & #3 position bearings. 50.724/1.9970 54.089/2.1295 1.643/0.0647 23.75/0.935 1 50.775/1.9990 54.115/2.1305

F23

PD-28-1

63.988/2.5192 67.993/2.6769 1.983/0.0781 .013/.0005 64.013/2.5202 68.014/2.6777 .051/.0020 Overflange length remains constant for standard and undersizes.

3 4

50.292/1.9800 50.343/1.9820 49.911/1.9650 49.962/1.9670 49.530/1.9500 49.581/1.9520

53.683/2.1135 53.708/2.1145 53.302/2.0985 53.327/2.0995 52.896/2.0825 52.921/2.0835

ENGINE 215 3497cc (3.5) SOHC (Cast Iron Block) 215 3497cc (3.5) SOHC (Cast Iron Block) (EGE)

15.62/0.615

F23

PD-28-2B

1.659/0.0653

15.62/0.615

F23

PD-28-3B

1.643/0.0647

15.62/0.615

F23

PD-28-4

Bore x Stroke

96mm x 81mm

Rod - High Strength Aluminum Silicon material. 57.988/2.2830 60.993/2.4013 1.483/0.0584 .013/.0005 58.014/2.2840 61.006/2.4018 .068/.0027

113

Std. .25 .50 .75

4C1405BS Std.

1.659/0.0653

VIN CYL

4M7278A

1948A U/L

TORQUE SETTINGS

Connecting Rod 40 ft.lbs/54 Nm + 1/4 turn Main Bearing 30 ft.lbs/41 Nm + 1/4 turn

16.54/0.651

F810

1470A IH

6B1410A Std. .25 .50 .75 1.0

CHRYSLER Engine Set No. Sizes Available

Type and Location

Max. Overall Length

Material Code

Qty. Set

Bearing Shell No.

1.983/0.0781 .013/.0005 .051/.0020

24.49/0.964

F780

MB3340P U/L

63.988/2.5192 67.993/2.6769 1.983/0.0781 .013/.0005 64.013/2.5202 68.014/2.6777 .051/.0020 Overflange length remains constant for standard and undersizes.

28.70/1.130

F780

MB3471P U/L

Standard Shaft Size

Housing Bore

63.988/2.5192 64.013/2.5202

67.993/2.6769 68.014/2.6777

Max. Bearing Thickness

Vertical Oil Clearance

12 (Contâ&#x20AC;&#x2122;d.) 4M2010P

Main 1,3,4

Std. .25 .50 .75 2 (Fl)

ENGINE

VIN CYL

Bore x Stroke

225 3687cc (3.7) Cast Crankshaft 225 3687cc (3.7) Cast Crankshaft 225 3687cc (3.7) Cast Crankshaft 225 3687cc (3.7) Cast Crankshaft 225 3687cc (3.7) Cast Crankshaft 225 3687cc (3.7) Cast Crankshaft 225 3687cc (3.7) Cast Crankshaft

C D E F G H K

3.40 x 4.13 3.40 x 4.13 3.40 x 4.13 3.40 x 4.13 3.40 x 4.13 3.40 x 4.13 3.40 x 4.13

L6 L6 L6 L6 L6 L6 L6

TORQUE SETTINGS Connecting Rod 45 ft.lbs/61 Nm Main Bearing 85 ft.lbs/115 Nm

Rod

6B1214AL

55.537/2.1865 55.563/2.1875

58.738/2.3125 58.750/2.3130

1.584/0.0624 .018/.0007 .071/.0028

18.29/0.720

F780

1214 IH

69.837/2.7495 69.863/2.7505

74.740/2.9425 74.752/2.9430

2.435/0.0959 .013/.0005 .066/.0026

22.44/0.883

F780

2724 U/L

69.837/2.7495 74.740/2.9425 2.435/0.0959 .013/.0005 69.863/2.7505 74.752/2.9430 .066/.0026 Overflange length remains constant for standards and undersizes.

28.14/1.108

F780

2725 U/L

Std. 10 20 30 40

4M1419AL

Main 1,2,4

Std. 10 20 30 40 3 (Fl)

4M2723P 40

Main - Alt set to 4M1419AL with +0.010" overflange length increase. * See below for dimensional information. 3 (Fl) 69.837/2.7495 74.740/2.9425 2.435/0.0959 .013/.0005 28.39/1.118 F780 2 2723 69.863/2.7505 74.752/2.9430 .066/.0026 U/L 1,2,4

69.837/2.7495 74.740/2.9425 69.863/2.7505 74.752/2.9430 To be discontinued once stock is exhausted.

2.435/0.0959 .013/.0005 .066/.0026

22.44/0.883

F780

2724 U/L

* DIMENSIONAL INFORMATION FOR 4M2723P Overall Width (Nominal) Increase in Width .040" u/s shaft 1.118" +0.010"

4C1115S Std.

4C874S Std.

RB2134Y Semi

Cam - engines from 1979-1983. 1 50.750/1.9980 54.090/2.1295 50.775/1.9990 54.115/2.1305 2 50.343/1.9820 53.683/2.1135 50.368/1.9830 53.708/2.1145

1.625/0.0640

19.94/0.785

F23

PD-21-1

1.625/0.0640

16.00/0.630

F23

PD-21-2

49.962/1.9670 49.987/1.9680

53.302/2.0985 53.327/2.0995

1.625/0.0640

16.00/0.630

F23

PD-21-3

49.555/1.9510 49.581/1.9520

52.895/2.0825 52.921/2.0835

1.638/0.0645

19.18/0.755

F23

PD-13-4

1.638/0.0645

23.49/0.925

F23

PD-18-1

1.638/0.0645

19.18/0.755

F23

PD-12-2

Cam - 1978 engines only. 1 50.750/1.9980 54.090/2.1295 50.775/1.9990 54.115/2.1305 2 50.343/1.9820 53.683/2.1135 50.368/1.9830 53.708/2.1145 3

49.962/1.9670 49.987/1.9680

53.302/2.0985 53.327/2.0995

1.638/0.0645

19.18/0.755

F23

PD-13-3

49.555/1.9510 49.581/1.9520

52.895/2.0825 52.921/2.0835

1.638/0.0645

19.18/0.755

F23

PD-13-4

30.48/1.200

F100

2134Y

Small End - semi finished - single pieces. 25.009/0.9846 26.378/1.0385 (Nominal) (Finish ID Bore Size)

114

CHRYSLER Type and Location

Standard Shaft Size

Max. Bearing Thickness

Housing Bore

Vertical Oil Clearance

ENGINE

VIN CYL

Bore x Stroke

318 (5.2) 318 (5.2) 318 (5.2) 318 (5.2) 318 (5.2) 318 (5.2) 318 (5.2) 318 (5.2)

G H J K L M N P

3.91 x 3.31 3.91 x 3.31 3.91 x 3.31 3.91 x 3.31 3.91 x 3.31 3.91 x 3.31 3.91 x 3.31 3.91 x 3.31

V8 V8 V8 V8 V8 V8 V8 V8

Max. Overall Length

Material Code

Qty. Set

Bearing Shell No.

Engine Set No. Sizes Available

TORQUE SETTINGS

Connecting Rod 45-50 ft.lbs/61-68 Nm Main Bearing 85-90 ft.lbs/115-122 Nm

Rod 53.950/2.1240 53.975/2.1250

57.150/2.2500 57.163/2.2505

1.585/0.0624 .005/.0002 .069/.0027

21.52/0.847

Rod - .002" oversize OD version of 8B481P. 53.950/2.1240 57.201/2.2520 1.737/0.0684 .006/.0002 53.975/2.1250 57.214/2.2525 (@ .010" u/s) .070/.0028

21.52/0.847

Main - flange O.D. 3.530" 1,2,4 63.487/2.4995 63.513/2.5005 3 (Fl)

63.487/2.4995 63.513/2.5005

F780

9090 IH

2.436/0.0959 .005/.0002 .069/.0027

22.27/0.877

68.390/2.6925 68.402/2.6930

2.436/0.0959 .025/.0010 .089/.0035

29.26/1.152

F780

2703 U

29.26/1.152

F780

33.70/1.327

F780

4357 L 4354 U/L

.025/.0010 .089/.0035 .005/.0002 .069/.0027

2700 IH

68.390/2.6925 68.402/2.6930

3 (Fl)

F780

4352 U/L

Cam - engines from 1980 on. 1 50.750/1.9980 54.090/2.1295 50.775/1.9990 54.115/2.1305

1.638/0.0645

22.35/0.880

F23

PD-16-1

1.638/0.0645

16.00/0.630

F23

PD-25-2

1.638/0.0645

15.75/0.620

F23

PD-25-3

1.638/0.0645

15.75/0.620

F23

PD-25-4

1.638/0.0645

24.00/0.945

F23

PD-9-5

1.638/0.0645

22.35/0.880

F23

PD-16-1

1.638/0.0645

19.43/0.765

F23

PD-9-2

1.638/0.0645

19.43/0.765

F23

PD-9-3

1.638/0.0645

19.43/0.765

F23

PD-9-4

1.638/0.0645

24.00/0.945

F23

PD-9-5

50.343/1.9820 50.368/1.9830 49.962/1.9670 49.987/1.9680 49.555/1.9510 49.581/1.9520 39.637/1.5605 39.662/1.5615

3 4 5

53.683/2.1135 53.708/2.1145 53.302/2.0985 53.327/2.0995 52.895/2.0825 52.921/2.0835 42.977/1.6920 43.002/1.6930

Cam - engines from 1975-1979. 1 50.750/1.9980 54.090/2.1295 50.775/1.9990 54.115/2.1305 2 50.343/1.9820 53.683/2.1135 50.368/1.9830 53.708/2.1145 3 49.962/1.9670 53.302/2.0985 49.987/1.9680 53.327/2.0995 4 49.555/1.9510 52.895/2.0825 49.581/1.9520 52.921/2.0835 5 39.637/1.5605 42.977/1.6920 39.662/1.5615 43.002/1.6930

8B481P Std. 01 10 20 30 40

8B481PO/S2 10 20 30 40

5M1344P Std. 01 10 20 30 40

5C1112S Std.

5C875S Std.

ENGINE

VIN CYL

Bore x Stroke

345 (5.7) Hemi

99.5mm x 90.9mm

TORQUE SETTINGS

Connecting Rod 15 ft.lbs + 90 deg Main Bearing 20 ft.lbs + 90 deg M12 Bolts Main Bearing 21 ft.lbs M8 Crossbolts

Rod 53.993/2.1257 54.008/2.1263

57.206/2.2522 57.219/2.2527

1.590/0.0626 .018/.0007 .062/.0024

Rod - .002" oversize OD version of 8B1808A. 53.993/2.1257 57.257/2.2542 1.740/0.0685 .018/.0007 54.008/2.1263 57.270/2.2547 (@0.25mm u/s) .082/.0032 Main 1-5

64.996/2.5589 65.004/2.5592

69.893/2.7517 69.906/2.7522

2.439/0.0960 .010/.0004 .048/.0019

115

20.10/0.791

21.60/0.850

F810

7211A IH 9112A IH 7216A U/L

8B1808A Std. .25 .50

8B1808AO/S2 .25 .50 .75

5M2220A Std. .25 .50

CHRYSLER Engine Set No. Sizes Available

Type and Location

Standard Shaft Size

Housing Bore

Max. Bearing Thickness

Vertical Oil Clearance

Max. Overall Length

Material Code

Qty. Set

Bearing Shell No.

MB3780W U

15 (Contâ&#x20AC;&#x2122;d.) 1T611S Std.

Thrust 3

72.644/2.8600 93.370/3.6760 2.586/0.1018 (ID) (OD) 73.152/2.8800 Set includes two pieces, use on No. 3 position. Required with 5M2220A main set.

ENGINE

VIN CYL

361 (5.9) 383 (6.3) 383 (6.3) 383 (6.3) 383 (6.3) 383 (6.3) 400 (6.6) 400 (6.6) 400 (6.6)

G H L N M N P

V8 V8 V8 V8 V8 V8 V8 V8 V8

Bore x Stroke

TORQUE SETTINGS Connecting Rod 45 ft.lbs/61 Nm Main Bearing 85 ft.lbs/115 Nm

4.12 x 3.38 4.25 x 3.38 4.25 x 3.38 4.25 x 3.38 4.25 x 3.38 4.25 x 3.38 4.34 x 3.38 4.34 x 3.38 4.34 x 3.38

Rod

8B527P

60.300/2.3740 60.325/2.3750

63.500/2.5000 63.513/2.5005

1.582/0.0623 .011/.0004 .075/.0030

23.67/0.932

F780

2466 IH

Main - flange O.D. 3.450". 66.662/2.6245 71.565/2.8175 1,2,4,5 Std. 10 20 30 40 66.688/2.6255 71.577/2.8180

2.435/0.0959 .021/.0008 .085/.0033

24.10/0.949

F780

2467 U/L

66.662/2.6245 71.565/2.8175 2.435/0.0959 .019/.0007 66.688/2.6255 71.577/2.8180 .083/.0033 Overflange length remains constant for standard and undersizes.

31.09/1.224

F780

2468 U/L

Std. 10 20 30 40

5M876P

3 (Fl)

5C876S

Cam 1

Std. 2 3 4 5

50.750/1.9980 50.775/1.9990

54.090/2.1295 54.115/2.1305

1.638/0.0645

19.18/0.755

F23

PD-17-1

50.343/1.9820 50.368/1.9830 49.962/1.9670 49.987/1.9680 49.555/1.9510 49.581/1.9520 44.400/1.7480 44.425/1.7490

53.683/2.1135 53.708/2.1145 53.302/2.0985 53.327/2.0995 52.895/2.0825 52.921/2.0835 47.740/1.8795 47.765/1.8805

1.638/0.0645

19.18/0.755

F23

PD-12-2

1.638/0.0645

17.12/0.674

F23

PD-12-3

1.638/0.0645

19.18/0.755

F23

PD-12-4

1.638/0.0645

19.18/0.755

F23

PD-12-5

ENGINE

VIN CYL

Bore x Stroke

360 (5.9) 360 (5.9) 360 (5.9)

J K L

4.00 x 3.58 4.00 x 3.58 4.00 x 3.58

V8 V8 V8

TORQUE SETTINGS Connecting Rod 45 ft.lbs/61 Nm Main Bearing 85 ft.lbs/115 Nm

Rod

8B481P

53.950/2.1240 53.975/2.1250

21.52/0.847

F780

2700 IH

Rod - .002" oversize OD version of 8B481P. 53.950/2.1240 57.201/2.2520 1.737/0.0684 .006/.0002 53.975/2.1250 57.214/2.2525 (@ .010" u/s) .070/.0028

21.52/0.847

F780

9090 IH

Main - flange O.D. 3.680" for 1971-73 engines. 71.361/2.8095 76.264/3.0025 2.431/0.0957 .015/.0006 1,2,4 Std. 10 20 30 40 71.387/2.8105 76.276/3.0030 .079/.0031

22.28/0.877

F780

2707 U/L

29.26/1.152

F780

31.98/1.259

F780

2708 U/L 2709 U/L

Std. 01 10 20 30 40

8B481PO/S2 10 20 30 40

57.150/2.2500 57.163/2.2505

1.585/0.0624 .005/.0002 .069/.0027

5M1051P

3 (Fl)

71.361/2.8095 76.264/3.0025 2.431/0.0957 71.387/2.8105 76.276/3.0030 5 71.361/2.8095 76.264/3.0025 2.431/0.0957 71.387/2.8105 76.276/3.0030 Overflange length remains constant for standards and undersizes.

116

.015/.0006 .079/.0031 .015/.0006 .079/.0031

CHRYSLER Type and Location

Standard Shaft Size

Max. Bearing Thickness

Housing Bore

Vertical Oil Clearance

Max. Overall Length

Material Code

Qty. Set

Bearing Shell No.

Engine Set No. Sizes Available

(Contâ&#x20AC;&#x2122;d.) Main - flange O.D. 3.910" for engines 1974 on. 71.361/2.8095 76.264/3.0025 2.431/0.0957 .015/.0006 1,2,4 71.387/2.8105 76.276/3.0030 .079/.0031

22.28/0.877

3 (Fl)

2.431/0.0957 .015/.0006 .079/.0031

29.26/1.152

F780

2706 U/L

71.361/2.8095 76.264/3.0025 2.431/0.0957 .015/.0006 71.387/2.8105 76.276/3.0030 .079/.0031 Overflange length remains constant for standards and undersizes.

31.98/1.259

F780

2709 U/L

71.361/2.8095 71.387/2.8105

76.264/3.0025 76.276/3.0030

F780

2705 IH

Main - Alt set to 5M1266P with +0.010" overflange length increase. * See below for dimensional information. 71.361/2.8095 76.264/3.0025 2.558/0.1007 .015/.0006 22.28/0.877 F780 6 2705 1,2,4 71.387/2.8105 76.276/3.0030 (@ .010" u/s) .079/.0031 IH 3 (Fl)

71.361/2.8095 71.387/2.8105

76.264/3.0025 76.276/3.0030

2.558/0.1007 .015/.0006 (@ .010" u/s) .079/.0031

29.52/1.162

F780

2715 U/L

71.361/2.8095 76.264/3.0025 71.387/2.8105 76.276/3.0030 Stock not available from fee warehouses.

2.558/0.1007 .015/.0006 (@ .010" u/s) .079/.0031

31.98/1.259

F780

2709 U/L

.010" u/s shaft .020" u/s shaft .030" u/s shaft .040" u/s shaft

1.638/0.0645

22.35/0.880

F23

PD-16-1

1.638/0.0645

16.00/0.630

F23

PD-25-2

1.638/0.0645

15.75/0.620

F23

PD-25-3

1.638/0.0645

15.75/0.620

F23

PD-25-4

1.638/0.0645

24.00/0.945

F23

PD-9-5

1.638/0.0645

22.35/0.880

F23

PD-16-1

1.638/0.0645

19.43/0.765

F23

PD-9-2

1.638/0.0645

19.43/0.765

F23

PD-9-3

1.638/0.0645

19.43/0.765

F23

PD-9-4

1.638/0.0645

24.00/0.945

F23

PD-9-5

3 4 5

53.683/2.1135 53.708/2.1145 53.302/2.0985 53.327/2.0995 52.895/2.0825 52.921/2.0835 42.977/1.6920 43.002/1.6930

Cam - engines from 1971-1979. 50.750/1.9980 54.090/2.1295 1 50.775/1.9990 54.115/2.1305 2 50.343/1.9820 53.683/2.1135 50.368/1.9830 53.708/2.1145 3 49.962/1.9670 53.302/2.0985 49.987/1.9680 53.327/2.0995 4 49.555/1.9510 52.895/2.0825 49.581/1.9520 52.921/2.0835 5

39.637/1.5605 39.662/1.5615

ENGINE 383 (6.4) 413 426 (7.0) (Excl. Hemi) 440 (7.2) 440 (7.2) 440 (7.2) 440 (7.2) 440 (7.2)

42.977/1.6920 43.002/1.6930

5M2715P 10 20 30 40

5C1112S Std.

5C875S Std.

VIN CYL

K L T U

5M1266P Std. 01 10 20 30

* DIMENSIONAL INFORMATION FOR 5M2715P Overall Width (Nominal) Increase in Width 1.162" +0.010" 1.162" +0.010" 1.162" +0.010" 1.162" +0.010"

Cam - engines from 1980 on. 50.750/1.9980 54.090/2.1295 1 50.775/1.9990 54.115/2.1305 50.343/1.9820 50.368/1.9830 49.962/1.9670 49.987/1.9680 49.555/1.9510 49.581/1.9520 39.637/1.5605 39.662/1.5615

V8 V8 V8 V8 V8 V8 V8 V8

Bore x Stroke 4.03 x 3.75 4.19 x 3.75 4.25 x 3.75 4.32 x 3.75 4.32 x 3.75 4.32 x 3.75 4.32 x 3.75 4.32 x 3.75

TORQUE SETTINGS

Connecting Rod 45 ft.lbs/61 Nm Main Bearing 85 ft.lbs/115 Nm

Rod 60.300/2.3740 60.325/2.3750

63.500/2.5000 63.513/2.5005

1.582/0.0623 .011/.0004 .075/.0030

117

23.67/0.932

F780

2466 IH

8B527P Std. 10 20 30 40

CHRYSLER Engine Set No. Sizes Available

Type and Location

Max. Overall Length

Material Code

Qty. Set

Bearing Shell No.

2.428/0.0956 .028/.0011 .091/.0036

24.10/0.949

F780

MB2067P U/L

69.837/2.7495 74.739/2.9425 2.428/0.0956 .028/.0011 69.863/2.7505 74.752/2.9430 .091/.0036 Overflange length remains constant for standard and oversizes.

31.09/1.224

F780

MB2625P U/L

Standard Shaft Size

Housing Bore

Max. Bearing Thickness

Vertical Oil Clearance

18 (Contâ&#x20AC;&#x2122;d.) 5M1277P Std. 10 20 30

Main - for 1974-78 engines. 69.837/2.7495 74.739/2.9425 1,2,4,5 69.863/2.7505 74.752/2.9430 3 (Fl)

5M4366P 20 30 40

Main - Alt set to 5M877P with +0.010" overflange length increase. * See below for dimensional information. 69.837/2.7495 74.740/2.9425 2.682/0.1056 .028/.0011 24.10/0.949 F780 8 4362 1,2,4,5 69.862/2.7505 74.752/2.9430 (@ .020" u/s) .091/.0036 U/L 3 (Fl)

69.837/2.7495 74.740/2.9425 69.862/2.7505 74.752/2.9430 Stock not available from fee warehouses.

2.682/0.1056 .028/.0011 (@ .020" u/s) .091/.0036

31.34/1.234

F780

4366 U/L

* DIMENSIONAL INFORMATION FOR 5M4366P Overall Width (Nominal) Increase in Width .020" u/s shaft 1.234" +0.010" .030" u/s shaft 1.234" +0.010" .040" u/s shaft 1.234" +0.010" Main - flange O.D. 3.624" for 1959-73. 69.837/2.7495 74.740/2.9425 1,2,4,5 Std. 10 20 30 40 69.862/2.7505 74.752/2.9430

5M877P

2.430/0.0956 .028/.0011 .091/.0036

24.10/0.949

F780

4362 U/L

69.837/2.7495 74.740/2.9425 2.430/0.0956 .028/.0011 69.862/2.7505 74.752/2.9430 .091/.0036 Overflange length remains constant for standard and oversizes.

31.09/1.224

F780

4363 U/L

3 (Fl)

5C876S

Cam 1

50.750/1.9980 50.775/1.9990

54.090/2.1295 54.115/2.1305

1.638/0.0645

19.18/0.755

F23

PD-17-1

50.343/1.9820 50.368/1.9830

53.683/2.1135 53.708/2.1145

1.638/0.0645

19.18/0.755

F23

PD-12-2

49.962/1.9670 49.987/1.9680 49.555/1.9510 49.581/1.9520 44.400/1.7480 44.425/1.7490

53.302/2.0985 53.327/2.0995 52.895/2.0825 52.921/2.0835 47.740/1.8795 47.765/1.8805

1.638/0.0645

17.12/0.674

F23

PD-12-3

1.638/0.0645

19.18/0.755

F23

PD-12-4

1.638/0.0645

19.18/0.755

F23

PD-12-5

Std.

4 5

ENGINE

VIN CYL

426 (7.0) Hemi

Bore x Stroke 4.25 x 3.75

TORQUE SETTINGS Connecting Rod 75 ft.lbs Main Bearing 100 ft.lbs

Rod

8B527P

60.300/2.3740 60.325/2.3750

63.500/2.5000 63.513/2.5005

1.582/0.0623 .011/.0004 .075/.0030

23.67/0.932

F780

2466 IH

69.837/2.7495 69.862/2.7505

74.739/2.9425 74.752/2.9430

2.428/0.0956 .028/.0011 .914/.0360

24.10/0.949

F780

MB2219P

69.837/2.7495 74.739/2.9425 2.428/0.0956 .028/.0011 69.862/2.7505 74.752/2.9430 .914/.0360 Overflange length remains constant for standard and oversizes.

31.09/1.224

F780

MB2495P

Std. 10 20 30 40

5M896P

Main 1,2,4,5

Std. 10 3 (Fl)

5C876S

Cam 1

50.750/1.9980 50.775/1.9990

54.090/2.1295 54.115/2.1305

1.638/0.0645

19.18/0.755

F23

PD-17-1

50.343/1.9820 50.368/1.9830

53.683/2.1135 53.708/2.1145

1.638/0.0645

19.18/0.755

F23

PD-12-2

49.962/1.9670 49.987/1.9680 49.555/1.9510 49.581/1.9520

53.302/2.0985 53.327/2.0995 52.895/2.0825 52.921/2.0835

1.638/0.0645

17.12/0.674

F23

PD-12-3

1.638/0.0645

19.18/0.755

F23

PD-12-4

44.400/1.7480 44.425/1.7490

47.740/1.8795 47.765/1.8805

1.638/0.0645

19.18/0.755

F23

PD-12-5

Std.

4 5

118

CHRYSLER PERFORMANCE CHRYSLER PERFORMANCE ENGINE INDEX Engine Disp. 273 (4.5) ............... 318 (5.2) ............... 340 ....................... 345 (5.7) ............... 350 ....................... 360 (5.9) ............... Type and Location

Standard Shaft Size

ENGINE

Notation

VIN

Cyl. V8 V8 V8 V8 V8 V8

Hemi

Max. Bearing Thickness

Housing Bore

VIN CYL

273 (4.5) 318 (5.2) 340 360 (5.9)

V8 V8 V8 V8

Year Line Engine Disp. 64-69 57-03 68-73 03-06 58-58 71-03

1 1 1 3 2 1

Notation

361 ....................... 383 ....................... 400 ....................... 413 ....................... 426 ....................... 440 .......................

Vertical Oil Clearance

Bore x Stroke 3.625 x 3.313 3.910 x 3.313 4.040 x 3.313 4.000 x 3.578

Rod - bearing shell does not contain dowel hole. 53.950/2.1240 57.150/2.2500 1.583/0.0623 .010/.0004 53.975/2.1250 57.163/2.2505 .063/.0025

Max. Overall Length

Material Code

Qty. Set

21.52/0.847

F780

76.264/3.0025 76.276/3.0030 76.264/3.0025 76.276/3.0030

2.431/0.0957 .015/.0006 .079/.0031 2.431/0.0957 .015/.0006 .079/.0031

29.26/1.152

F780

31.98/1.259

F780

Main - for 360 engines from 1974-03. 71.361/2.8095 76.264/3.0025 1,2,4 71.387/2.8105 76.276/3.0030

2.431/0.0957 .015/.0006 .079/.0031

22.28/0.877

F780

76.264/3.0025 76.276/3.0030 76.264/3.0025 76.276/3.0030

2.431/0.0957 .015/.0006 .079/.0031 2.431/0.0957 .015/.0006 .079/.0031

29.26/1.152

F780

31.98/1.259

F780

Main - for 318 engines from 1974 on. 1,2,4 63.487/2.4995 68.390/2.6925 63.513/2.5005 68.402/2.6930 3 (Fl) 63.487/2.4995 68.390/2.6925 63.513/2.5005 68.402/2.6930 3 (Fl) 63.487/2.4995 68.390/2.6925 63.513/2.5005 68.402/2.6930 5 63.487/2.4995 68.390/2.6925 63.513/2.5005 68.402/2.6930

2.436/0.0959 .005/.0002 .069/.0027 2.436/0.0959 .025/.0010 .089/.0035 2.436/0.0959 .025/.0010 .089/.0035 2.436/0.0959 .005/.0002 .069/.0027

22.27/0.877

F780

3 (Fl) 5

71.361/2.8095 71.387/2.8105 71.361/2.8095 71.387/2.8105

F780

29.26/1.152

F780

29.26/1.152

F780

33.70/1.327

F780

Main - for 273 & 318 engines from 1957-73 (Half groove set). 63.487/2.4995 68.390/2.6925 2.436/0.0959 .005/.0002 1,2,4 63.513/2.5005 68.402/2.6930 .069/.0027

22.27/0.877

F780

3 (Fl)

.005/.0002 .069/.0027 .005/.0002 .069/.0027

29.26/1.152

F780

33.70/1.327

F780

2.436/0.0959 .013/.0005 .076/.0030 2.436/0.0959 .013/.0005 .065/.0026 2.436/0.0959 .013/.0005 .065/.0026

22.27/0.877

F780

63.487/2.4995 68.390/2.6925 2.436/0.0959 63.513/2.5005 68.402/2.6930 5 63.487/2.4995 68.390/2.6925 2.436/0.0959 63.513/2.5005 68.402/2.6930 Overflange length remains constant for standard and undersizes. Main - for 340 engines from 1968-73. 1,2,4 63.487/2.4995 68.389/2.6925 63.512/2.5005 68.402/2.6930 3 (Fl) 63.487/2.4995 68.389/2.6925 63.512/2.5005 68.402/2.6930 5 63.487/2.4995 68.389/2.6925 63.512/2.5005 68.402/2.6930

119

2 4 2 5 5 5

Engine Set No. Sizes Available

Connecting Rod 45-50 ft.lbs/61-68 Nm Main Bearing 80-85 ft.lbs/108-115 Nm

22.28/0.877

71.361/2.8095 71.387/2.8105 71.361/2.8095 71.387/2.8105

Bearing Shell No.

Year Line 58-77 61-71 72-80 59-73 64-71 66-73

TORQUE SETTINGS

2.431/0.0957 .015/.0006 .079/.0031

3 (Fl)

Cyl. V8 V8 V8 V8 V8 V8

Hemi

Rod - Bearings are .0005" thinner per half to give .001" extra clearance for standard sized cranks. 53.950/2.1240 57.150/2.2500 1.573/0.0619 .010/.0004 51.52/2.028 F781 2 53.975/2.1250 57.163/2.2505 .069/.0027 Main - for 360 engines from 1971-73. 71.361/2.8095 76.264/3.0025 1,2,4 71.387/2.8105 76.276/3.0030

VIN

29.26/1.152

F780

33.70/1.327

F780

1B481H

2700H U/L

Std. 01 10

2700HX

1B481HX Std.

2707 U/L

5M1051P Std. 10 20 30 40

2708 U/L 2709 U/L 2705 IH

5M1266P Std. 01 10 20 30

2706 U/L 2709 U/L 4352 U/L 2703 U 4357 L 4354 U/L 4352 U/L

5M1344P Std. 01 10 20 30 40

5M540P Std. 10 20 30 40

4353 U/L 4354 U/L

MB2283P U/L MB2036P U/L MB2559P U/L

5M963P Std. 10 20 30

CHRYSLER PERFORMANCE Engine Set No. Sizes Available

Type and Location

Housing Bore

Max. Bearing Thickness

Std.

Max. Overall Length

Material Code

Qty. Set

Bearing Shell No.

Cam - for 1979-03 engines only. 50.750/1.9980 54.090/2.1295 1 50.775/1.9990 54.115/2.1305

1.638/0.0645

22.35/0.880

F23

PD-16-1

50.343/1.9820 50.368/1.9830

53.683/2.1135 53.708/2.1145

1.638/0.0645

16.00/0.630

F23

PD-25-2

49.962/1.9670 49.987/1.9680 49.555/1.9510 49.581/1.9520 39.637/1.5605 39.662/1.5615

53.302/2.0985 53.327/2.0995 52.895/2.0825 52.921/2.0835 42.977/1.6920 43.002/1.6930

1.638/0.0645

15.75/0.620

F23

PD-25-3

1.638/0.0645

15.75/0.620

F23

PD-25-4

1.638/0.0645

24.00/0.945

F23

PD-9-5

Cam - for 1957-78 engines only. 50.750/1.9980 54.090/2.1295 1 50.775/1.9990 54.115/2.1305

1.638/0.0645

22.35/0.880

F23

PD-16-1

1.638/0.0645

19.43/0.765

F23

PD-9-2

1.638/0.0645

19.43/0.765

F23

PD-9-3

1.638/0.0645

19.43/0.765

F23

PD-9-4

1.638/0.0645

24.00/0.945

F23

PD-9-5

4 5

5C875S Std.

3 4 5

50.343/1.9820 50.368/1.9830 49.962/1.9670 49.987/1.9680 49.555/1.9510 49.581/1.9520 39.637/1.5605 39.662/1.5615

ENGINE

1B527HD Std. 01 10

1B527HXD Std.

53.683/2.1135 53.708/2.1145 53.302/2.0985 53.327/2.0995 52.895/2.0825 52.921/2.0835 42.977/1.6920 43.002/1.6930

VIN CYL

350 361 400

V8 V8 V8

Bore x Stroke 4.063 x 3.375 4.125 x 3.375 4.342 x 3.375

Connecting Rod 45 ft.lbs/61 Nm Main Bearing 85 ft.lbs/115 Nm

Rod - bearing has dowel hole in cap half, and may be used in engines without dowelled connecting rods. 60.300/2.3740 63.500/2.5000 1.567/0.0617 23.67/0.932 F781 2 2466HXD 60.325/2.3750 63.513/2.5005 U/L Bearings are .0005" thinner per half to give .001" extra clearance for standard sized cranks.

Main - Full groove set. 66.662/2.6245 71.565/2.8175 2.435/0.0959 1,2,4,5 Std. 10 20 30 40 66.688/2.6255 71.577/2.8180 3 (Fl) 66.662/2.6245 71.565/2.8175 2.435/0.0959 66.688/2.6255 71.577/2.8180 Overflange length remains constant for standard and undersizes.

5C876S

TORQUE SETTINGS

5M876P

Cam 1

Std. 2 3 4 5

Vertical Oil Clearance

(Contâ&#x20AC;&#x2122;d.) 5C1112S

Standard Shaft Size

.021/.0008 .085/.0033 .019/.0007 .083/.0033

24.10/0.949

F780

31.09/1.224

F780

2467 U/L 2468 U/L

50.750/1.9980 50.775/1.9990

54.090/2.1295 54.115/2.1305

1.638/0.0645

19.18/0.755

F23

PD-17-1

50.343/1.9820 50.368/1.9830 49.962/1.9670 49.987/1.9680 49.555/1.9510 49.581/1.9520 44.400/1.7480 44.425/1.7490

53.683/2.1135 53.708/2.1145 53.302/2.0985 53.327/2.0995 52.895/2.0825 52.921/2.0835 47.740/1.8795 47.765/1.8805

1.638/0.0645

19.18/0.755

F23

PD-12-2

1.638/0.0645

17.12/0.674

F23

PD-12-3

1.638/0.0645

19.18/0.755

F23

PD-12-4

1.638/0.0645

19.18/0.755

F23

PD-12-5

ENGINE

VIN CYL

345 (5.7) Hemi

Bore x Stroke 99.5mm x 90.9mm

TORQUE SETTINGS Connecting Rod 15 ft.lbs + 90 deg Main Bearing 20 ft.lbs + 90 deg M12 Bolts Main Bearing 21 ft.lbs M8 Crossbolts

Rod

1B1808H Std. .025 .25

53.993/2.1257 54.008/2.1263

57.206/2.2522 57.219/2.2527

1.590/0.0626 .018/.0007 .062/.0024

120

20.10/0.791

F781

7211H U/L

CHRYSLER PERFORMANCE Type and Location

Standard Shaft Size

Max. Bearing Thickness

Housing Bore

Vertical Oil Clearance

Max. Overall Length

Material Code

Qty. Set

Bearing Shell No.

Engine Set No. Sizes Available

(Contâ&#x20AC;&#x2122;d.) Rod - Bearings are .0005" thinner per half to give .001" extra clearance for standard sized cranks. 53.993/2.1257 57.206/2.2522 1.577/0.0621 .043/.0017 20.10/0.791 F781 2 54.008/2.1263 57.219/2.2527 .087/.0034 Main 1-5

64.996/2.5589 65.004/2.5592

69.893/2.7517 69.906/2.7522

2.439/0.0960 .010/.0004 .048/.0019

21.60/0.850

F780

Main - Bearings are .0005" thinner per half to give .001" extra clearance for standard sized cranks. 64.996/2.5589 69.893/2.7517 2.426/0.0955 .035/.0014 21.60/0.850 F780 10 1-5 65.004/2.5592 69.906/2.7522 .073/.0029 Thrust 3

72.644/2.8600 93.370/3.6760 2.586/0.1018 (ID) (OD) 73.152/2.8800 Set includes two pieces, use on No. 3 position. Required with 5M2220H/HX main set.

ENGINE

VIN CYL

383

Bore x Stroke 4.250 x 3.375

7211HX U/L 7216H U/L

1T611S

Connecting Rod 45 ft.lbs/61 Nm Main Bearing 85 ft.lbs/115 Nm

31.09/1.224

F780

2468 U/L

F780

2467 U/L

1.638/0.0645

19.18/0.755

F23

PD-17-1

1.638/0.0645

19.18/0.755

F23

PD-12-2

1.638/0.0645

17.12/0.674

F23

PD-12-3

50.750/1.9980 50.775/1.9990 50.343/1.9820 50.368/1.9830 49.962/1.9670 49.987/1.9680

54.090/2.1295 54.115/2.1305 53.683/2.1135 53.708/2.1145 53.302/2.0985 53.327/2.0995

49.555/1.9510 49.581/1.9520

52.895/2.0825 52.921/2.0835

1.638/0.0645

19.18/0.755

F23

PD-12-4

44.400/1.7480 44.425/1.7490

47.740/1.8795 47.765/1.8805

1.638/0.0645

19.18/0.755

F23

PD-12-5

ENGINE 413 426 Hemi 440

Std.

66.662/2.6245 71.565/2.8175 2.435/0.0959 .019/.0007 66.688/2.6255 71.577/2.8180 .083/.0033 Overflange length remains constant for standard and undersizes.

Std.

TORQUE SETTINGS

24.10/0.949

Cam 1

5M2220H Std. .025 .25

MB3780W U

2.435/0.0959 .021/.0008 .085/.0033

3 (Fl)

Std.

5M2220HX

1B1808HX

7216HX U/L

Main - Full groove set. 66.662/2.6245 1,2,4,5 66.688/2.6255

1B527HD Std. 01 10

1B527HXD Std.

5M876P Std. 10 20 30 40

5C876S Std.

VIN CYL V8 V8 V8

Bore x Stroke 4.188 x 3.750 4.250 x 3.750 4.320 x 3.750

TORQUE SETTINGS

Rod - bearing has dowel hole in cap half, and may be used in engines without dowelled connecting rods. 60.300/2.3740 63.500/2.5000 1.580/0.0622 .016/.0006 23.67/0.932 F780 2 2466HD 60.325/2.3750 63.513/2.5005 .069/.0027 U/L Rod - bearing has dowel hole in cap half, and may be used in engines without dowelled connecting rods. 60.300/2.3740 63.500/2.5000 1.567/0.0617 23.67/0.932 F781 2 2466HXD 60.325/2.3750 63.513/2.5005 U/L Bearings are .0005" thinner per half to give .001" extra clearance for standard sized cranks

121

Connecting Rod 45 ft.lbs/61 Nm Main Bearing 85 ft.lbs/115 Nm

1B527HD Std. 01 10

1B527HXD Std.

CHRYSLER PERFORMANCE Engine Set No. Sizes Available

Type and Location

Max. Overall Length

Material Code

Qty. Set

Bearing Shell No.

24.10/0.949

F780

4362 U/L

31.09/1.224

F780

4363 U/L

2.428/0.0956 .028/.0011 .914/.0360

24.10/0.949

F780

MB2219P

69.837/2.7495 74.739/2.9425 2.428/0.0956 .028/.0011 69.862/2.7505 74.752/2.9430 .914/.0360 Overflange length remains constant for standard and undersizes.

31.09/1.224

F780

MB2495P

1.638/0.0645

19.18/0.755

F23

PD-17-1

1.638/0.0645

19.18/0.755

F23

PD-12-2

Standard Shaft Size

Housing Bore

Max. Bearing Thickness

Vertical Oil Clearance

(Contâ&#x20AC;&#x2122;d.)

Main - for engines from 1959-73 (Full groove set). 69.837/2.7495 74.740/2.9425 2.430/0.0956 .028/.0011 1,2,4,5 Std. 10 20 30 40 69.862/2.7505 74.752/2.9430 .091/.0036

5M877P

3 (Fl)

69.837/2.7495 74.740/2.9425 2.430/0.0956 .028/.0011 69.862/2.7505 74.752/2.9430 .091/.0036 Overflange length remains constant for standard and undersizes.

5M896P Std. 10

Main - for 426 Hemi (Full groove set). 69.837/2.7495 74.739/2.9425 1,2,4,5 69.862/2.7505 74.752/2.9430 3 (Fl)

5C876S

Cam 1

50.750/1.9980 50.775/1.9990 50.343/1.9820 50.368/1.9830

54.090/2.1295 54.115/2.1305 53.683/2.1135 53.708/2.1145

49.962/1.9670 49.987/1.9680

53.302/2.0985 53.327/2.0995

1.638/0.0645

17.12/0.674

F23

PD-12-3

49.555/1.9510 49.581/1.9520 44.400/1.7480 44.425/1.7490

52.895/2.0825 52.921/2.0835 47.740/1.8795 47.765/1.8805

1.638/0.0645

19.18/0.755

F23

PD-12-4

1.638/0.0645

19.18/0.755

F23

PD-12-5

Std. 2

122

DAEWOO DAEWOO ENGINE INDEX Engine Disp.

Notation

796cc (0.8)........... 98 1588cc (1.6)..... 2000cc (2.0).........

Matiz (F8CV) C16XE Family II

VIN

Cyl.

L4 L4 L4

Year Line Engine Disp. 98-05 99-02 99-00

1 2 3

2000cc (2.0)......... 2200cc (2.2)......... 2200cc (2.2).........

Notation

VIN

Cyl.

Family II X22SE X22SE

L4 L4 L4

Year Line 01-02 99-00 01-02

3 4 4

DAEWOO MODEL INDEX Model

CID

1588 2200

LANOS LEGANZA Type and Location

Standard Shaft Size

ENGINE

Liter

Description

1.6 C16XE 2.2 X22SE Max. Bearing Thickness

Housing Bore

VIN CYL

796cc (0.8) Matiz (F8CV)

Years 99-02 99-02

Model

CID

NUBIRA

Vertical Oil Clearance

Max. Overall Length

Bore x Stroke

cc 2000

Material Code

Liter

Description

2.0 Family II

Qty. Set

Bearing Shell No.

Years 99-02

Engine Set No. Sizes Available

TORQUE SETTINGS

68.5mm x 72.0mm

Rod

Main 1-4

37.982/1.4954 38.000/1.4961

40.998/1.6141 41.017/1.6148

1.490/0.0587 .018/.0007 .071/.0028

18.00/0.709

43.982/1.7316 44.000/1.7323

47.998/1.8897 48.018/1.8905

1.993/0.0785 .012/.0005 .076/.0030

17.13/0.674

ENGINE

VIN CYL

Bore x Stroke

98 1588cc (1.6) C16XE

79mm x 81.5mm

F810

3B1266A

1266A IH

Std. .25 .50 .75 1.0

1267A IH

Std. .25 .50 .75 1.0

4M1267A

TORQUE SETTINGS

Rod 42.971/1.6918 42.987/1.6924

46.000/1.8110 46.013/1.8115

1.497/0.0589 .019/.0007 .074/.0029

16.63/0.655

54.971/2.1642 54.986/2.1648

58.999/2.3228 59.012/2.3233

2.001/0.0788 .013/.0005 .065/.0026

19.50/0.768

54.971/2.1642 58.999/2.3228 2.001/0.0788 .013/.0005 54.986/2.1648 59.012/2.3233 .065/.0026 Overflange length increase for undersizes. *See below for dimensional information.

25.92/1.020

Main 1,2,4,5 3 (Fl)

F780

F780 F780

8 2

4B1350

1350 IH

Std. .25 .50 .75 1.0

1338 IH

Std. .25 .50 .75 1.0

5M1801P

1339 IH

* DIMENSIONAL INFORMATION FOR 5M1801P Overall Width (Nominal) Increase in Width 0.25 mm u/s shaft 1.028"/26.12 mm +0.008"/0.20mm 0.50 mm u/s shaft 1.036"/26.32 mm +0.016"/0.40mm 0.75 mm u/s shaft 1.036"/26.32 mm +0.016"/0.40mm 1.00 mm u/s shaft 1.044"/26.52 mm +0.024"/0.60mm

ENGINE

VIN CYL

2000cc (2.0) Family II 2000cc (2.0) Family II

L4 L4

Bore x Stroke 86mm x 86mm 86mm x 86mm

Rod - to be superceded by 4B2322A when stock is exhausted. 48.971/1.9280 52.000/2.0472 1.500/0.0590 .013/.0005 48.987/1.9286 52.012/2.0477 .066/.0026

TORQUE SETTINGS

Connecting Rod 40-50 Nm + 45 deg Main Bearing 60-70 Nm + 45 deg

19.30/0.760

F780

4B1408P

2320 U/L

Std. .25 .50 .75

2322A U/L

Std. .25 .50 .75 1.0

2327 IH

.25 .50 .75

Rod 48.971/1.9280 48.987/1.9286

52.000/2.0472 52.012/2.0477

1.500/0.0591 .013/.0005 .057/.0022

19.30/0.760

57.982/2.2828 57.995/2.2833

62.000/2.4409 62.013/2.4415

1.995/0.0785 .015/.0006 .066/.0026

19.50/0.768

57.982/2.2828 62.000/2.4409 1.995/0.0785 .015/.0006 57.995/2.2833 62.013/2.4415 .066/.0026 Overflange length increase for undersizes. *See below for dimensional information.

26.10/1.028

Main 1,2,4,5 3 (Fl)

F810

F780 F780

8 2

123

2328 IH

4B2322A

5M1549P

DAEWOO Engine Set No. Sizes Available

Type and Location

Max. Overall Length

Material Code

Qty. Set

Bearing Shell No.

1.995/0.0785 .015/.0006 .066/.0026

19.50/0.768

F780

2327 IH

57.982/2.2828 62.000/2.4409 1.995/0.0785 .015/.0006 57.995/2.2833 62.013/2.4415 .066/.0026 Overflange length remains constant for standard and undersizes.

25.90/1.020

F780

2329 IH

Standard Shaft Size

Housing Bore

57.982/2.2828 57.995/2.2833

62.000/2.4409 62.013/2.4415

Max. Bearing Thickness

Vertical Oil Clearance

(Contâ&#x20AC;&#x2122;d.) 5M2329P

Main 1,2,4,5

Std. .25 .50 .75 3 (Fl)

ENGINE

VIN CYL

2200cc (2.2) X22SE 2200cc (2.2) X22SE

L4 L4

Bore x Stroke 86mm x 94.6mm 86mm x 94.6mm

TORQUE SETTINGS Connecting Rod 25 ft.lbs / 35 Nm + 45 deg + 15 deg Tighten in three stages Main Bearing 37 ft.lbs / 50 Nm + 45 deg + 15 deg Tighten in three stages

4B1408P Std. .25 .50 .75

Rod - to be superceded by 4B2322A when stock is exhausted. 48.971/1.9280 52.000/2.0472 1.500/0.0590 .013/.0005 48.987/1.9286 52.012/2.0477 .066/.0026

19.30/0.760

F780

2320 U/L

19.30/0.760

F810

2322A U/L

19.50/0.768

F780

25.90/1.020

F780

2327 IH 2325 IH

Rod

4B2322A Std. .25 .50 .75 1.0

48.971/1.9280 48.987/1.9286

52.000/2.0472 52.012/2.0477

1.500/0.0591 .013/.0005 .057/.0022

Main - two oil holes in flange bearing. 1,2,4,5 57.982/2.2828 62.000/2.4409 1.995/0.0785 .015/.0006 Std. .25 .50 .75 1.0 57.995/2.2833 62.013/2.4415 .066/.0026 3 (Fl) 57.974/2.2824 60.000/2.3622 1.995/0.0785 57.995/2.2833 60.013/2.3627 Overflange length increases for undersizes. *See below for dimensional information.

5M2325

* DIMENSIONAL INFORMATION FOR 5M2325 Overall Width (Nominal) Increase in Width 0.25 mm u/s shaft 1.028"/26.10mm +.008"/0.20mm 0.50 mm u/s shaft 1.036"/26.30mm +.016"/0.40mm 0.75 mm u/s shaft 1.036"/26.30mm +.016"/0.40mm 1.00 mm u/s shaft 1.036"/26.30mm +.016"/0.40mm

124

DAIHATSU DAIHATSU ENGINE INDEX Engine Disp. 61 993cc (1.0)....... 1166cc ................. 1290cc .................

Notation

VIN

Cyl.

CB & CL Series Toyota 3K Toyota 4K

L3 L4 L4

Year Line Engine Disp. 88-92 69-83 77-88

1 2 2

Notation

VIN

Cyl.

HC-E HD-E

2 0

L4 L4

1295cc (1.3)......... 1589cc (1.6).........

Year Line 89-92 90-92

3 3

DAIHATSU MODEL INDEX CID

Liter

CHARADE - CES CHARADE - CLS

Model

61 61

CHARADE - CLX

CHARADE - CSX

993 993 1295 993 1295 993

1.0 1.0 1.3 1.0 1.3 1.0

Type and Location

Standard Shaft Size

Description CB & CL Series CB & CL Series HC-E CB & CL Series HC-E CB & CL Series Max. Bearing Thickness

Housing Bore

Years 89 88-89 89 88-89 89 88

CID

Liter

CHARADE - SE

Model

CHARADE - SX

993 1295 993 1295 1589 1589

1.0 1.3 1.0 1.3 1.6 1.6

ROCKY - SE ROCKY - SX

Vertical Oil Clearance

ENGINE

VIN CYL

Bore x Stroke

61 993cc (1.0) CB & CL Series

76mm x 73mm

Max. Overall Length

Material Code

Qty. Set

Description CB & CL Series HC-E CB & CL Series HC-E HD-E HD-E

Bearing Shell No.

Years 90-92 90-92 90 90-92 90-92 90-92

Engine Set No. Sizes Available

TORQUE SETTINGS

Connecting Rod 15-21 ft.lbs/20-29 Nm Main Bearing 39-48 ft.lbs/53-65 Nm

Rod 39.975/1.5738 40.000/1.5748

43.000/1.6929 43.024/1.6939

1.490/0.0587 .020/.0008 .095/.0037

18.00/0.709

F780

8010 IH

Main - for engines from 1985 on. Half groove set with lower tang on opposite side to upper. Non-stock item. Check for availability. 41.975/1.6526 46.000/1.8110 1.990/0.0783 .020/.0008 19.50/0.768 F780 4 8009 1,2,3,4 42.000/1.6535 46.024/1.8120 .095/.0037 L 1,2,3,4

41.975/1.6526 42.000/1.6535

46.000/1.8110 46.024/1.8120

1.990/0.0783 .020/.0008 .095/.0037

Thrust 3

47.750/1.8799 61.750/2.4311 48.000/1.8898 62.000/2.4409 Note: Set includes two pieces, use on No. 3 position. Required with 4M8011/4M8009. Balance Shaft 44.976/1.7707 1 (Max.) 2

33.975/1.3376 (Max.)

ENGINE

F780

8011 U

1.98/0.078

F861

8011T IH

1T8011

2BS8453

1.509/0.0594 .030/.0012 .086/.0034

17.00/0.669

F820

SH1452

37.026/1.4577 (Max.)

1.509/0.0594 .030/.0012 .086/.0034

20.00/0.787

F820

SH1453

VIN CYL L4 L4

Bore x Stroke 75mm x 66mm 75mm x 73mm

4M8009 Std. .25 .50 .75

19.50/0.768

48.024/1.8907 (Max.)

1166cc Toyota 3K 1290cc Toyota 4K

3B8010 Std. .25 .50 .75

Std.

TORQUE SETTINGS

Connecting Rod 29-38 ft.lbs/39-52 Nm (74-83 engines) Connecting Rod 34 ft.lbs/47 Nm (67-73 engines) Main Bearing 39-48 ft.lbs/53-65 Nm (74-83 engines) Main Bearing 44 ft.lbs/59 Nm (67-73 engines)

Rod 41.976/1.6526 42.000/1.6535

44.999/1.7716 45.024/1.7726

1.496/0.0589 .008/.0003 .081/.0032

18.90/0.744

Main - for all engines to 8/83 full groove. 1,2,3,4,5 49.976/1.9676 54.000/2.1260 50.000/1.9685 54.028/2.1271

1.996/0.0786 .008/.0003 .076/.0030

20.90/0.823

Thrust 3

55.560/2.1874 67.560/2.6598 55.820/2.1976 67.820/2.6701 Note: Set includes four pieces, use on No. 3 position. Required with 5M1102 main set.

2.49/0.098

125

F780

F820

F250

4B1101

1101 IH

Std. .25 .50 .75 1.0

1102AL IH

Std. .25 .50 .75 1.0

8062T IH

5M1102

2T8062 Std.

DAIHATSU Engine Set No. Sizes Available

Type and Location

Material Code

Qty. Set

Bearing Shell No.

2.385/0.0939 .020/.0008 .071/.0028

17.90/0.705

F23

8066

47.500/1.8701 47.525/1.8711

2.260/0.0890 .020/.0008 .071/.0028

17.90/0.705

F23

8067

47.000/1.8504 47.025/1.8514 46.500/1.8307 46.525/1.8317

2.133/0.0840 .020/.0008 .071/.0028 2.006/0.0790 .020/.0008 .071/.0028

17.90/0.705

F23

8068

17.90/0.705

F23

8069

24.89/0.980

F100

RB4037

Housing Bore

43.209/1.7011 43.225/1.7018

48.000/1.8898 48.025/1.8907

42.959/1.6913 42.975/1.6919

42.709/1.6815 42.725/1.6821 42.459/1.6716 42.475/1.6722

Max. Bearing Thickness

Vertical Oil Clearance

(Contâ&#x20AC;&#x2122;d.) 4C8066

Cam 1

Std.

RB4037 Semi

Max. Overall Length

Standard Shaft Size

Small End - not bored, single pieces. 17.986/0.7081 20.000/0.7874 17.998/0.7086 20.020/0.7882

ENGINE

VIN CYL

Bore x Stroke

1295cc (1.3) HC-E 1589cc (1.6) HD-E

2 0

76mm x 71.4mm 78mm x 87.6mm

L4 L4

TORQUE SETTINGS Connecting Rod 25-32 ft.lbs/34-43 Nm Main Bearing 33-40 ft.lbs/44-54 Nm

Rod

4B8016

44.980/1.7709 45.000/1.7717

48.000/1.8898 48.020/1.8905

1.490/0.0587 .020/.0008 .086/.0034

18.00/0.709

F780

8016 IH

49.980/1.9677 50.000/1.9685

54.000/2.1260 54.020/2.1268

1.996/0.0786 .008/.0003 .074/.0029

18.10/0.713

F780

8017 IH

57.000/2.2441 75.750/2.9823 57.250/2.2539 76.000/2.9921 Note: Set includes two pieces, use on No.3 position. Required with 5M8017 main set.

2.49/0.098

F817

8017T IH

Std. .25 .50 .75 1.0

Std. .25 .50

Main 1, 2, 3, 4, 5

1T8017

Thrust 3

5M8017

Std.

126

DEUTZ DEUTZ ENGINE INDEX Engine Disp. 1884cc (1.9)......... 1884cc (1.9)......... 2826cc (2.8)......... 2826cc (2.8)......... 3768cc (3.8)......... Type and Location

Notation

VIN

Cyl.

(F2L912),Diesel (F2L912D),Diesel (F3L912),Diesel (F3L912D),Diesel (F4L912),Diesel

Standard Shaft Size

2 2 3 3 4 Max. Bearing Thickness

Housing Bore

ENGINE

VIN CYL

1884cc (1.9) (F2L912) Diesel 1884cc (1.9) (F2L912D) Diesel Rod - 2 req’d per engine. 59.941/2.3599 59.960/2.3606

2 2

64.000/2.5197 64.019/2.5204

ENGINE

Rod - 3 req’d per engine. 59.941/2.3599 59.960/2.3606

1 1 2 2 3

3 3

Vertical Oil Clearance

Max. Overall Length

Bore x Stroke

25.00/0.984

Bore x Stroke

2.230/0.0878 .050/.0020 .114/.0045

27.00/1.063

Rod - 4 req’d per engine. 59.941/2.3599 59.960/2.3606

Bore x Stroke

25.00/0.984

Main - 5 req’d per engine. 69.971/2.7548 74.500/2.9331 69.990/2.7555 74.519/2.9338

2.230/0.0878 .050/.0020 .114/.0045

27.00/1.063

4710cc (4.7) (F5L912) Diesel 4710cc (4.7) (F5L912D) Diesel Rod - 5 req’d per engine. 59.941/2.3599 59.960/2.3606

5 5

Bore x Stroke

25.00/0.984

Main - 6 req’d per engine. 69.971/2.7548 74.500/2.9331 69.990/2.7555 74.519/2.9338

2.230/0.0878 .050/.0020 .114/.0045

27.00/1.063

VIN CYL

Rod - 6 req’d per engine. 59.941/2.3599 59.960/2.3606

6 6

2580 U/L

1B2580 Std. .25 .50 .75 1.0 1.25 1.50

F780

1B2580

2580 U/L

Std. .25 .50 .75 1.0 1.25 1.50

2583 IH

Std. .25 .50 .75 1.0 1.25 1.50

1M2583

F780

1B2580

2580 U/L

Std. .25 .50 .75 1.0 1.25 1.50

2583 IH

Std. .25 .50 .75 1.0 1.25 1.50

1M2583

100mm x 120mm 100mm x 120mm

2.000/0.0787 .040/.0016 .104/.0041

5652cc (5.7) (F6L912) Diesel 5652cc (5.7) (F6L912D) Diesel

F780

TORQUE SETTINGS

64.000/2.5197 64.019/2.5204

ENGINE

TORQUE SETTINGS

2.000/0.0787 .040/.0016 .104/.0041

VIN CYL

Engine Set No. Sizes Available

100mm x 120mm 100mm x 120mm

64.000/2.5197 64.019/2.5204

ENGINE

Bearing Shell No.

3 4 4 5 5

TORQUE SETTINGS

Main - 4 req’d per engine. 69.971/2.7548 74.500/2.9331 69.990/2.7555 74.519/2.9338

4 4

Qty. Set

Year Line

4 5 5 6 6

100mm x 120mm 100mm x 120mm

25.00/0.984

VIN CYL

Material Code

Cyl.

100mm x 120mm 100mm x 120mm

2.000/0.0787 .040/.0016 .104/.0041

3768cc (3.8) (F4L912) Diesel 3768cc (3.8) (F4L912D) Diesel

VIN

(F4L912D),Diesel (F5L912),Diesel (F5L912D),Diesel (F6L912),Diesel (F6L912D),Diesel

TORQUE SETTINGS

64.000/2.5197 64.019/2.5204

ENGINE

Notation

3768cc (3.8)......... 4710cc (4.7)......... 4710cc (4.7)......... 5652cc (5.7)......... 5652cc (5.7).........

2.000/0.0787 .040/.0016 .104/.0041

VIN CYL

2826cc (2.8) (F3L912) Diesel 2826cc (2.8) (F3L912D) Diesel

Year Line Engine Disp.

Bore x Stroke

F780

1B2580

2580 U/L

Std. .25 .50 .75 1.0 1.25 1.50

2583 IH

Std. .25 .50 .75 1.0 1.25 1.50

1M2583

TORQUE SETTINGS

100mm x 120mm 100mm x 120mm

64.000/2.5197 64.019/2.5204

2.000/0.0787 .040/.0016 .104/.0041

25.00/0.984

Main - 7 req’d per engine. 69.971/2.7548 74.500/2.9331 69.990/2.7555 74.519/2.9338

2.230/0.0878 .050/.0020 .114/.0045

27.00/1.063

127

F780

1B2580

2580 U/L

Std. .25 .50 .75 1.0 1.25 1.50

2583 IH

Std. .25 .50 .75 1.0 1.25 1.50

1M2583

DODGE DODGE ENGINE INDEX Engine Disp.

Notation

1410cc (1.4)......... Mits G12B 1410cc (1.4)......... Mits G12B 1410cc (1.4)......... Mits G12B 90 1468cc (1.5)..... Mits G15B/4G15 90 1468cc (1.5)..... Mits G15B/4G15 90 1468cc (1.5)..... Mits G15B/4G15 90 1468cc (1.5)..... Mits G15B/4G15 1595cc (1.6)......... Mits 4G61 (DOHC) 1595cc (1.6)......... Mits 4G61T (DOHC), Turbo 98 1597cc (1.6)..... Mits 4G32/G32B 98 1597cc (1.6)..... Mits 4G32/G32B 98 1597cc (1.6)..... Mits 4G32/G32B, Turbo 98 1597cc (1.6)..... Mits 4G32/G32B 98 1597cc (1.6)..... Mits 4G32/G32B 98 1597cc (1.6)..... Mits 4G32/G32B, Turbo 1754cc (1.8)......... Mits G37B (8V SOHC) 112 1834cc (1.8)... Mits 4G93 112 1834cc (1.8)... Mits 4G93 122 1995cc (2.0)... Mits 4G63/G63B 122 1995cc (2.0)... Mits 4G52/G52B 122 1996cc (2.0)... 16V SOHC 122 1996cc (2.0)... 16V SOHC 122 1996cc (2.0)... 16V DOHC 122 1996cc (2.0)... 16V SOHC (ECB) 122 1996cc (2.0)... 16V DOHC (ECC) 122 1996cc (2.0)... 16V DOHC (ECF) 122 1997cc (2.0)... Mits 4G52/G52B 122 1997cc (2.0)... Mits 4G63/G63B 122 1997cc (2.0)... Mits 4G63 DOHC 122 1997cc (2.0)... Mits 4G63/G63B 135 (2.2) ............... 135 (2.2) ............... Turbo 135 (2.2) ............... 135 (2.2) ............... 135 (2.2) ............... Turbo 135 (2.2) ............... 135 (2.2) ............... Turbo 143 2346cc (2.3)... Mits 4D55, Turbo,Diesel 143 2346cc (2.3)... Mits 4D55, Turbo,Diesel 2351cc (2.4)......... Mits 4G64 2351cc (2.4)......... Mits 4G64 148 2429cc (2.4)... DOHC 148 2429cc (2.4)... DOHC 148 2429cc (2.4)... DOHC (EDZ) 152 2497cc (2.5)... Mits 6G73 152 2497cc (2.5)... Mits 6G73 152 2497cc (2.5)... Mits 6G73 (EEB) 152 2497cc (2.5)... Mits 6G73 (EEB) 153 2507cc (2.5)... 153 2507cc (2.5)... Turbo 153 2507cc (2.5)... 153 2507cc (2.5)... AMC Eng. 2555cc (2.6)......... Mits G54B (SOHC) 156 2555cc (2.6)... Mits G54B (SOHC) 156 2555cc (2.6)... Mits G54B (SOHC) 156 2555cc (2.6)... Mits G54B (SOHC) Mits G54B (SOHC) 156 2555cc (2.6)... 156 2555cc (2.6)... Mits G54B (SOHC) 156 2555cc (2.6)... Mits G54B (SOHC), Turbo 156 2555cc (2.6)... Mits G54B (SOHC), Turbo 156 2555cc (2.6)... Mits G54B (SOHC) 167 2700cc (2.7)... 167 2700cc (2.7)... 167 2700cc (2.7)... 167 2700cc (2.7)... (EER) 170 (2.8) ............... 170 (2.8) ............... 170 (2.8) ............... 181 2972cc (3.0)... Mits 6G72 SOHC 181 2972cc (3.0)... Mits 6G72 DOHC 181 2972cc (3.0)... Mits 6G72 DOHC, Turbo 181 2972cc (3.0)... Mits 6G72 DOHC 181 2972cc (3.0)... Mits 6G72 SOHC 181 2972cc (3.0)... Mits 6G72 DOHC 181 2972cc (3.0)... Mits 6G72 DOHC, Turbo 181 2972cc (3.0)... Mits 6G72 DOHC 181 2972cc (3.0)... Mits 6G72 SOHC 181 2972cc (3.0)... Mits 6G72 SOHC 197 3200cc (3.2)... SOHC (EGW)

VIN

Cyl.

2 A J A K P X

L4 L4 L4 L4 L4 L4 L4 L4 L4 L4 L4 L4 L4 L4 L4 L4 L4 L4 L4 L4 L4 L4 L4 L4 L4 L4 L4 L4 L4 L4 L4 L4 L4 L4 L4 L4 L4 L4 L4 L4 L4 L4 L4 L4 V6 V6 V6 V6 L4 L4 L4 L4 L4 L4 L4 L4 L4 L4 L4 L4 L4 V6 V6 V6 V6 L6 L6 L6 V6 V6 V6 V6 V6 V6 V6 V6 V6 V6 V6

3 B F K Y Z T C D D U C F Y C Y Y 5 D R V 8 A B C C D E 9 J G W B X X H N H N G J K P 7 7 D E F G H N W R T U R 6 A 3 B C H H J K S S U J

Year Line Engine Disp. 81-83 84-84 79-80 91-94 85-91 88-88 89-90 89-90 89-90 81-83 84-84 84-90 71-80 89-90 89-89 89-90 93-94 92-92 84-89 74-80 97-05 01-04 96-99 95-98 95-98 95-98 81-83 85-88 89-89 89-91 83-87 87-93 81-82 83-88 90-90 84-94 84-88 83-83 84-85 93-94 90-92 96-02 95-02 95-98 99-00 99-00 95-98 95-98 89-95 89-92 86-95 96-02 83-83 81-83 81-82 84-89 78-80 83-87 84-86 85-86 79-80 02-06 04-06 00-01 98-06 60-69 68-69 68-69 87-00 91-92 91-92 93-96 01-05 91-96 93-96 91-91 89-92 90-92 98-01

1 1 1 2 2 2 2 3 3 4 4 4 4 4 4 5 6 6 8 7 9 9 9 9 9 9 7 8 8 8 10 10 10 10 10 10 10 11 11 12 12 13 13 13 15 15 15 15 10 10 10 14 16 16 16 16 16 16 16 16 16 17 17 17 17 18 18 18 19 19 19 19 19 19 19 19 19 19 20

Notation

198 (3.2) ............... 198 (3.2) ............... 201 (3.3) ............... OHV 201 (3.3) ............... OHV 201 (3.3) ............... OHV 201 (3.3) ............... OHV 201 (3.3) ............... OHV 201 (3.3) ............... OHV 201 (3.3) ............... OHV 201 (3.3) ............... OHV (EGM) 215 3497cc (3.5)... SOHC (Cast Iron Block) 215 3497cc (3.5)... SOHC (Aluminum Block) 215 3497cc (3.5)... SOHC (Aluminum Block) 215 3497cc (3.5)... SOHC (Aluminum Block) 225 (3.7) ............... 225 3687cc (3.7)... Forged Crankshaft 225 3687cc (3.7)... Forged Crankshaft 225 3687cc (3.7)... Cast Crankshaft 225 3687cc (3.7)... Forged Crankshaft 225 3687cc (3.7)... Cast Crankshaft 225 3687cc (3.7)... Forged Crankshaft 225 3687cc (3.7)... Cast Crankshaft 225 3687cc (3.7)... Cast Crankshaft 225 3687cc (3.7)... Cast Crankshaft 225 3687cc (3.7)... Cast Crankshaft 225 3687cc (3.7)... Cast Crankshaft 225 3687cc (3.7)... Forged Crankshaft 226 (3.7) ............... 230 (3.8) ............... OHV 239 (3.9) ............... OHV 239 (3.9) ............... OHV 273 (4.5) ............... 273 (4.5) ............... 285 (4.7) ............... 285 (4.7) ............... 287 (4.7) ............... 318 (5.2) ............... 318 (5.2) ............... 318 (5.2) ............... 318 (5.2) ............... 318 (5.2) ............... 318 (5.2) ............... 318 (5.2) ............... 318 (5.2) ............... 318 (5.2) ............... 318 (5.2) ............... 318 (5.2) ............... 318 (5.2) ............... 318 (5.2) ............... 318 (5.2) ............... 318 (5.2) ............... 318 (5.2) ............... 318 (5.2) ............... 318 (5.2) ............... 318 (5.2) ............... 318 (5.2) ............... 318 (5.2) ............... 326 (5.3) ............... 340 (5.6) ............... 340 (5.6) ............... 340 (5.6) ............... 345 (5.7) ............... Hemi 345 (5.7) ............... Hemi 345 (5.7) ............... Hemi (EZB) 350 (5.7) ............... 360 (5.9) ............... 360 (5.9) ............... 360 (5.9) ............... 360 (5.9) ............... 360 (5.9) ............... 360 (5.9) ............... 360 (5.9) ............... 360 (5.9) ............... 360 (5.9) ............... 360 (5.9) ............... 360 (5.9) ............... 360 (5.9) ............... 360 (5.9) ............... 361 (5.9) ...............

128

VIN

Cyl.

A B 3 G J R S T U G F G M V K

L6 L6 V6 V6 V6 V6 V6 V6 V6 V6 V6 V6 V6 V6 V6 L6 L6 L6 L6 L6 L6 L6 L6 L6 L6 L6 L6 V6 V6 V6 V6 V8 V8 V8 V8 V8 V8 V8 V8 V8 V8 V8 V8 V8 V8 V8 V8 V8 V8 V8 V8 V8 V8 V8 V8 V8 V8 V8 V8 V8 V8 V8 V8 V8 V8 V8 V8 V8 V8 V8 V8 V8 V8 V8 V8 V8 V8 V8 V8

6 B B C C D E F H N X K L M X D J N N 4 8 E E F G G H K L M N P R S T T U Y Z H J P D H 2 1 5 8 F J K L S T U W Y Z

Year Line 70-71 70-74 01-05 98-98 94-96 90-06 04-04 93-97 94-95 99-01 93-97 00-06 02-04 00-04 02-04 60-67 68-70 76-79 68-76 76-80 70-76 77-80 81-82 81-82 83-87 79-80 71-72 04-06 94-06 87-87 88-03 64-67 68-69 05-06 01-06 00-04 59-67 83-89 68-69 70-73 74-80 67-69 70-73 74-80 78-80 81-82 81-82 81-82 81-82 79-89 81-85 83-89 92-03 83-87 83-83 88-03 83-83 59-59 70-73 71-71 68-69 03-06 05-06 06-06 58-58 83-88 87-02 70-70 71-79 74-79 71-80 74-80 79-82 74-82 82-82 83-88 70-72 89-03 58-64

18 18 21 21 21 21 21 21 21 21 22 20 20 20 24 18 18 23 18 23 18 23 23 23 23 23 18 24 21 25 25 27 27 26 26 26 27 28 27 27 28 27 27 28 28 28 28 28 28 28 28 28 28 28 28 28 28 27 29 29 29 30 30 30 31 32 32 32 32 32 32 32 32 32 32 32 32 32 31

DODGE DODGE ENGINE INDEX (Cont’d.) Engine Disp. 383 (6.4) ............... 383 (6.4) ............... 383 (6.3) ............... 383 (6.3) ............... 383 (6.3) ............... 383 (6.3) ............... 383 (6.3) ............... 383 (6.3) ............... 400 (6.6) ............... 400 (6.6) ............... 400 (6.6) ............... 400 (6.6) ............... 413 (6.8) ............... 426 (7.0) ............... 426 (7.0) ...............

Notation

VIN

8 G H J L N J M N P (Excl. Hemi) Hemi

Cyl. V8 V8 V8 V8 V8 V8 V8 V8 V8 V8 V8 V8 V8 V8 V8

Year Line Engine Disp. 61-67 59-60 68-69 67-69 67-69 70-71 70-71 70-71 71-78 72-76 74-78 72-78 61-65 63-65 64-67

31 33 31 31 31 31 31 31 31 31 31 31 33 33 34

Notation

VIN

Cyl.

Year Line

Hemi Hemi

J R

(EWB)

A D K L M T U V E W E

V8 V8 V8 V8 V8 V8 V8 V8 V8 V8 V8 V10 V10 V10

67-70 67-71 66-67 74-74 73-79 67-69 67-69 69-69 70-77 70-78 70-72 99-02 94-03 92-98

426 (7.0) ............... 426 (7.0) ............... 440 (7.2) ............... 440 (7.2) ............... 440 (7.2) ............... 440 (7.2) ............... 440 (7.2) ............... 440 (7.2) ............... 440 (7.2) ............... 440 (7.2) ............... 440 (7.2) ............... 488 7990cc (8.0)... 488 7990cc (8.0)... 488 7990cc (8.0)...

34 34 33 33 33 33 33 33 33 33 33 36 35 36

DODGE MODEL INDEX Model

CID

cc 1754

2000 GTX 330

400 400 - LS 440

600 600 - ES 600 - SE 880

A100

A100 - SPORTSMAN

A108 VAN ARIES ARIES - CUSTOM ARIES - LE ARIES - SE ASPEN

360 383 122 122 273 318 361 413 426 426 135 156 135 156 273 318 361 413 426 426 135 153 156 135 156 135 153 156 273 318 361 413 426 426 170 198 225 273 318 170 198 225 318 170 135 153 156 135 156 135 153 156 135 153 156 225 225

1997 1997

2555 2555

2507 2555 2555 2507 2555

3687

2507 2555 2555 2507 2555 2507 2555 3687 3687

Liter

Description

1.8 Mits G37B (8V SOHC) 5.9 6.4 2.0 Mits 4G63 DOHC 2.0 Mits 4G63/G63B 4.5 5.2 5.9 6.8 7.0 (Excl. Hemi) 7.0 Hemi 2.2 2.6 Mits G54B (SOHC) 2.2 2.6 Mits G54B (SOHC) 4.5 5.2 5.9 6.8 7.0 (Excl. Hemi) 7.0 Hemi 2.2 2.5 2.6 Mits G54B (SOHC) 2.2 2.6 Mits G54B (SOHC) 2.2 2.5 2.6 Mits G54B (SOHC) 4.5 5.2 5.9 6.8 7.0 (Excl. Hemi) 7.0 Hemi 2.8 3.2 3.7 Forged Crankshaft 4.5 5.2 2.8 3.2 3.7 Forged Crankshaft 5.2 2.8 2.2 2.5 2.6 Mits G54B (SOHC) 2.2 2.6 Mits G54B (SOHC) 2.2 2.5 2.6 Mits G54B (SOHC) 2.2 2.5 2.6 Mits G54B (SOHC) 3.7 Cast Crankshaft 3.7 Forged Crankshaft

Years

Model

89-90

ASPEN

70 59-67 89 89 64 63-64 64 63 63-64 64 82-83 82-83 82 82 64 63-64 64 63 63-64 64 83-88 86-88 83-85 83-84 83-84 85-88 86-88 85 64 63-64 63-64 63 63-64 64 64-69 70 64-70 64-67 67-70 68-69 70 68-70 68-70 67-69 81-87 86-87 81-85 81-84 81-84 85-89 86-89 85 81-86 86 81-85 76-80 76

ASPEN - CUSTOM

ASPEN - SPECIAL EDITION

AVENGER AVENGER - ES B100 VAN

B100 VAN SPORTSMAN

B150 VAN B150 VAN SPORTSMAN B1500 VAN B1500 VAN SPORTSMAN B200 VAN

B200 VAN - MAXI

B200 VAN - MAXI WAGON

129

CID 318 360 225 225 318 360

3687 3687

225 225 318 360 122 152 122 152 198 225 225 318 360 440

3687 3687

225 225 318 360 225 239 318

3687 3687

225 239 318 239 318 360

3687

239 318 198 225 225 318 360 400 440 225 225 318 360 400 440 225 225 318 360 400 440

1996 2497 1996 2497 3687 3687

3687

3687 3687

Liter

Description

Years

5.2 5.9 3.7 Cast Crankshaft 3.7 Forged Crankshaft 5.2 5.9

76-80 76-80 76-77 76 76-77 76-77

3.7 3.7 5.2 5.9 2.0 2.5 2.0 2.5 3.2 3.7 3.7 5.2 5.9 7.2

Cast Crankshaft Forged Crankshaft

76-77 76 76-77 76-77 95-99 97-00 96-98 95-98 71 76-80 71-76 71-80 71-78 74

3.7 3.7 5.2 5.9 3.7 3.9 5.2

Cast Crankshaft Forged Crankshaft

16V DOHC Mits 6G73 16V DOHC Mits 6G73 Cast Crankshaft Forged Crankshaft

Cast Crankshaft OHV

76-80 71-76 71-80 72-78 81-87 88-94 81-94

3.7 Cast Crankshaft 3.9 OHV 5.2 3.9 OHV 5.2 5.9

81-87 88-94 81-94 95-98 95-98 98

3.9 5.2 3.2 3.7 3.7 5.2 5.9 6.6 7.2 3.7 3.7 5.2 5.9 6.6 7.2

95-97 95-97 71 76-80 71-76 71-80 71-80 71-78 75-78 76-80 72-76 72-80 72-80 76-78 74-78

OHV Cast Crankshaft Forged Crankshaft

Cast Crankshaft Forged Crankshaft

3.7 Cast Crankshaft 3.7 Forged Crankshaft 5.2 5.9 6.6 7.2

76-77 72-76 72-80 72-80 76-78 76-78

DODGE DODGE MODEL INDEX (Cont’d.) Model B200 VAN SPORTSMAN

B250 VAN

B250 VAN SPORTSMAN

B2500 VAN B2500 VAN SPORTSMAN B300 VAN

B300 VAN - MAXI

B300 VAN - MAXI WAGON

B300 VAN SPORTSMAN

B350 VAN B350 VAN SPORTSMAN B3500 VAN B3500 VAN SPORTSMAN CARAVAN

CARAVAN - C/V CARAVAN - ES CARAVAN - LE

CARAVAN - SE

CID

225 225 318 360 400 440 225 239 318 360

3687 3687

225 239 318 360 239 318 360

3687

239 318 360 225 225 318 360 400 440 225 225 318 360 400 440

3687

3687 3687

225 318 360 400 440

3687

225 318 360 400 440 239 318 360

3687

Liter 3.7 3.7 5.2 5.9 6.6 7.2 3.7 3.9 5.2 5.9

Description Cast Crankshaft Forged Crankshaft

Cast Crankshaft OHV

Years 76-80 71-76 71-80 72-80 76-78 76-78 81-87 88-94 81-94 81-94

3.7 Cast Crankshaft 3.9 OHV 5.2 5.9 3.9 OHV 5.2 5.9

81-87 88-94 81-94 81-94 95-98 95-98 95-98

3.9 5.2 5.9 3.7 3.7 5.2 5.9 6.6 7.2 3.7 3.7 5.2 5.9 6.6 7.2

95-97 95-97 95-97 76-79 71-76 71-80 71-80 76-78 76-78 76-79 72-76 72-80 72-80 76-78 75-78

OHV Cast Crankshaft Forged Crankshaft

Cast Crankshaft Forged Crankshaft

3.7 Forged Crankshaft 5.2 5.9 6.6 7.2

72-75 72-80 72-80 76-78 76-78

3.7 Forged Crankshaft 5.2 5.9 6.6 7.2 3.9 OHV 5.2 5.9

71-73 71-80 72-80 77-78 76-78 90-94 81-94 81-94

318 360 318 360

5.2 5.9 5.2 5.9

81-94 81-94 95-98 95-98

318 360 135 148 153 156 181 201 230 153 181 201 181 201 230 135 153 156 181 201 230 135 148

5.2 5.9 2.2 2.4 2.5 2.6 3.0 3.3 3.8 2.5 3.0 3.3 3.0 3.3 3.8 2.2 2.5 2.6 3.0 3.3 3.8 2.2 2.4

95-97 95-97 84-87 96-02 88-95 84-87 90-00 90-06 98-99 89-95 89-95 91-95 93-95 93-97 96-97 84-87 88-91 84-87 87-95 91-97 96-97 84-87 96-97

2429 2507 2555 2972 2507 2972 2972

2507 2555 2972

2429

DOHC Mits G54B (SOHC) Mits 6G72 SOHC OHV OHV Mits 6G72 SOHC OHV Mits 6G72 SOHC OHV OHV Mits G54B (SOHC) Mits 6G72 SOHC OHV OHV DOHC

Model

CID

Liter

CARAVAN - SE

153 156 181 201 201 201 225 225 318 360 400 440 98 156 198 225 318 340 360 383 426 340 383 426 440

2507 2555 2972

2.5 2.6 3.0 3.3 3.3 3.3 3.7 3.7 5.2 5.9 6.6 7.2 1.6 2.6 3.2 3.7 5.2 5.6 5.9 6.3 7.0 5.6 6.3 7.0 7.2

CARAVAN - SPORT CARAVAN - SXT CB300

CHALLENGER

CHALLENGER - R/T

CHALLENGER RALLYE CHARGER

CHARGER - 2.2 CHARGER - 500

CHARGER DAYTONA R/T CHARGER - R/T

CHARGER - SE CHARGER - SHELBY CHARGER - SPECIAL EDITION

CHARGER - SPORT

CHARGER - SUPER BEE

CHARGER - SXT

318 340 225 225 167 273 318 340 360 383 400 426 440 135 225 318 383 426 440 345 318 345 383 426 440 215

1597 2555 3687

3687 3687 2700

3687

3497

5.2 5.6 3.7 3.7 2.7 4.5 5.2 5.6 5.9 6.3 6.6 7.0 7.2 2.2 3.7 5.2 6.3 7.0 7.2 5.7 5.2 5.7 6.3 7.0 7.2 3.5

Mits G54B (SOHC) Mits 6G72 SOHC OHV OHV OHV Cast Crankshaft Forged Crankshaft

Mits 4G32/G32B Mits G54B (SOHC) Forged Crankshaft

Hemi Hemi

Cast Crankshaft Forged Crankshaft

Hemi Forged Crankshaft Hemi Hemi Hemi Hemi SOHC (Aluminum Block)

Years 88-93 84-87 87-97 91-06 01 06 77-79 74-75 74-80 74-80 76-78 77-79 78-79 78-83 70-71 70-72 70-74 70-73 74 70-71 70 71 70-71 70-71 70-71 72 72 76 68-76 06 66 67-76 72-73 74-76 67-71 72-76 67-69 67-74 84-86 70 70-71 70-71 69 69-70 06 68 06 68 68-71 67-71 06

135

2.2

83-87

318 340 360 383 400 440 225 225 318 360 400

5.2 5.6 5.9 6.3 6.6 7.2 3.7 Cast Crankshaft 3.7 Forged Crankshaft 5.2 5.9 6.6

71-78 72-73 74-78 71 72-78 71-74 76 76 76 76 76

5.6 6.3 7.0 Hemi 7.2 3.5 SOHC (Aluminum Block) 1.4 Mits G12B 1.5 Mits G15B/4G15 1.6 Mits 4G32/G32B 1.8 Mits 4G93 2.0 Mits 4G52/G52B

71 71 71 71 06

3687 3687

340 383 426 440 215

3497

90 98 112 122

1410 1468 1597 1834 1995

COLT

130

3687 3687

Description

79-83 89-94 71-83 92-94 74-77

DODGE DODGE MODEL INDEX (Cont’d.) Model

CID

Liter

Description

2351 2555 1468 1597 1468 1468 1597 1468 1468 1468 1468 1597 2351 1597 1995 1410 1597 1410 1597 1410 1468 1597 1410 1468 1597 1468 1834 1468 1834 1468 1597 1995 1468 1597 1834 2351 1995 1997

2.4 2.6 1.5 1.6 1.5 1.5 1.6 1.5 1.5 1.5 1.5 1.6 2.4 1.6 2.0 1.4 1.6 1.4 1.6 1.4 1.5 1.6 1.4 1.5 1.6 1.5 1.8 1.5 1.8 1.5 1.6 2.0 1.5 1.6 1.8 2.4 2.0 2.0

Mits 4G64 Mits G54B (SOHC) Mits G15B/4G15 Mits 4G32/G32B Mits G15B/4G15 Mits G15B/4G15 Mits 4G32/G32B Mits G15B/4G15 Mits G15B/4G15 Mits G15B/4G15 Mits G15B/4G15 Mits 4G32/G32B Mits 4G64 Mits 4G32/G32B Mits 4G52/G52B Mits G12B Mits 4G32/G32B Mits G12B Mits 4G32/G32B Mits G12B Mits G15B/4G15 Mits 4G32/G32B Mits G12B Mits G15B/4G15 Mits 4G32/G32B Mits G15B/4G15 Mits 4G93 Mits G15B/4G15 Mits 4G93 Mits G15B/4G15 Mits 4G32/G32B Mits 4G52/G52B Mits G15B/4G15 Mits 4G32/G32B Mits 4G93 Mits 4G64 Mits 4G63/G63B Mits 4G63/G63B

93-94 78-80 89-91 89 89-92 89-90 89-90 89-90 89-92 91-92 89 89 93-94 75-77 76-77 79 77-83 82-83 82-83 84 85-90 84-88 84 85-89 84 94 94 90-93 93 89-90 73-90 74-77 85-88 85-88 92 93-94 84 85-91

122 156 225 225 273 318 326 350 360 361 383 400 413 426 426 440 225 273 318 383 426 440 273 318 383

1997 2555 3687 3687

2.0 2.6 3.7 3.7 4.5 5.2 5.3 5.7 5.9 5.9 6.3 6.6 6.8 7.0 7.0 7.2 3.7 4.5 5.2 6.3 7.0 7.2 4.5 5.2 6.3

Mits 4G63/G63B Mits G54B (SOHC) Cast Crankshaft Forged Crankshaft

86 84-86 76 71-76 65-67 65-76 59 58 73-76 58-59 67-71 72-76 65 65 65-67 67-76 68-70 68 68-70 68-70 68-69 68 68 68-70 68-70

225 225 318 360 383 400

3687 3687

COLT COLT - 100 DL COLT - 100 E COLT - 100 LX COLT - 200 DL COLT - 200 E COLT - 200 GT COLT - 200 LX COLT - 4X4 COLT - CAROUSEL

156 90 98 90 90 98 90 90 90 90 98 98 122

COLT - CUSTOM 98 COLT - DELUXE 98 COLT - DL 90 98 COLT - E COLT - ES COLT - GL COLT - GT COLT - PREMIER COLT - SE COLT - VISTA COLT - VISTA CUSTOM CONQUEST CORONET

CORONET - 440

CORONET - 500 CORONET BROUGHAM

CORONET CRESTWOOD

CORONET - CUSTOM

90 98 90 112 90 112 90 98 122 90 98 112 122 122

3687

(Excl. Hemi) Hemi Forged Crankshaft

Hemi

Years

3.7 Cast Crankshaft 3.7 Forged Crankshaft 5.2 5.9 6.3 6.6

76 76 71-76 75-76 71 75-76

5.2 5.6 5.9 6.3 6.6 3.7 Forged Crankshaft 5.2

71-75 73 74-76 71 72-76 71-75 71-75

Model

CID

CORONET - CUSTOM

340 360 383 400 225 273 318 383 383 426 440

CORONET - DELUXE

CORONET - R/T CORONET - SUPER BEE CUSTOM

D100 PICKUP

D100 SERIES D150 PICKUP

D150 PICKUP - S D200 PICKUP

D200 SERIES D250 PICKUP

D300 PICKUP

D300 SERIES D350 PICKUP D400 PICKUP D450 PICKUP D50 PICKUP

318 340 360 383 400 225 318

3687

DAKOTA

131

383 426 440 273 318 326 350 361 413 426 426 198 225 225 239 318 360 383 400 440 170 225 318 225 239 318 360 400 440 239 318 225 225 318 360 383 400 440 225 318 225 239 318 360 225 225 318 360 383 400 440 225 318 318 360 360 440 360 440 122 122 156 135 153 153 226 239

3687

3687 3687

3687

1995 1997 2555 2507 2507

Liter

Description

Years

5.6 5.9 6.3 6.6 3.7 Forged Crankshaft 4.5 5.2 6.3 6.3 7.0 Hemi 7.2

72-73 74-75 71 72-75 68-70 68 68-70 68-70 68 67-70 67-70

6.3 7.0 7.2 4.5 5.2 5.3 5.7 5.9 6.8 7.0 7.0 3.2 3.7 3.7 3.9 5.2 5.9 6.3 6.6 7.2 2.8 3.7 5.2 3.7 3.9 5.2 5.9 6.6 7.2 3.9 5.2 3.7 3.7 5.2 5.9 6.3 6.6 7.2 3.7 5.2 3.7 3.9 5.2 5.9 3.7 3.7 5.2 5.9 6.3 6.6 7.2 3.7 5.2 5.2 5.9 5.9 7.2 5.9 7.2 2.0 2.0 2.6 2.2 2.5 2.5 3.7 3.9

68-70 68-70 69-70 64-65 62-65 59 58 58-64 62-65 63-65 64-65 70-71 76-87 68-76 88-89 68-89 71-88 68-71 71-78 73-78 61-65 60-67 60-67 77-87 88-93 77-93 77-93 77-78 78 90-91 90-91 76-80 68-76 68-80 71-80 68-71 71-78 73-78 60-67 60-67 81-87 88-93 81-93 81-93 76-78 68-76 68-80 71-80 68-71 71-78 73-78 60-67 60-67 81-83 81-93 78-81 78 78-81 78 79-80 81-82 79-82 87-88 89-95 96-02 04-05 87-03

Hemi

(Excl. Hemi) Hemi Cast Crankshaft Forged Crankshaft OHV

Forged Crankshaft Cast Crankshaft OHV

OHV Cast Crankshaft Forged Crankshaft

Forged Crankshaft Cast Crankshaft OHV Cast Crankshaft Forged Crankshaft

Forged Crankshaft

Mits 4G52/G52B Mits 4G52/G52B Mits G54B (SOHC) AMC Eng. OHV

DODGE DODGE MODEL INDEX (Cont’d.) Model DAKOTA

DAKOTA - LARAMIE DAKOTA - SHELBY DAKOTA - SLT DAKOTA - SPORT DAKOTA - ST DART

DART - 270

DART - CUSTOM

DART - DEMON DART - DEMON 340 DART - GT

DART - GTS

DART - SPECIAL

DART - SPECIAL EDITION DART - SPORT DART - SPORT 340 DART - SPORT 360 DART - SWINGER

DAYTONA DAYTONA - ES DAYTONA - IROC DAYTONA - IROC R/T DAYTONA - PACIFICA

CID 285 287 318 360 226 285 318 226 285 239 318 226 285 170 198 225 225 273 318 340 360 361 383 413 170 225 273 318 340 383 170 198 225 273 318 198 225 318 340 170 225 273 318 340 383 273 318 340 383 198 225 225 318 225 318 198 225 318 340 360 170 198 225 225 273 318 340 360 135 153 181 153 181 153 181 181 135 135

3687 3687

3687

3687 3687 3687 3687

3687 3687

2507 2972 2507 2972 2507 2972 2972

Liter 4.7 4.7 5.2 5.9 3.7 4.7 5.2 3.7 4.7 3.9 5.2 3.7 4.7 2.8 3.2 3.7 3.7 4.5 5.2 5.6 5.9 5.9 6.3 6.8 2.8 3.7 4.5 5.2 5.6 6.3 2.8 3.2 3.7 4.5 5.2 3.2 3.7 5.2 5.6 2.8 3.7 4.5 5.2 5.6 6.3 4.5 5.2 5.6 6.3 3.2 3.7 3.7 5.2 3.7 5.2 3.2 3.7 5.2 5.6 5.9 2.8 3.2 3.7 3.7 4.5 5.2 5.6 5.9 2.2 2.5 3.0 2.5 3.0 2.5 3.0 3.0 2.2 2.2

Description

OHV

Cast Crankshaft Forged Crankshaft

Forged Crankshaft

Cast Crankshaft Forged Crankshaft Forged Crankshaft Forged Crankshaft

Cast Crankshaft Forged Crankshaft

Mits 6G72 SOHC Mits 6G72 SOHC Mits 6G72 DOHC Mits 6G72 SOHC

Years

Model

01-05 00-01 90-99 98-03 06 06 89 06 06 88-91 91 06 06 61-69 70-74 76 60-76 64-69 60-76 68 76 60-62 68 61-65 68 68 68 68 68 68 69 70-74 69-75 69 69-75 71-72 71-72 71-72 71-72 68-69 68-69 68-69 68-69 68-69 68 68-69 68-69 68-69 68-69 71-74 76 71-76 71-76

DAYTONA - SHELBY

74-75 74-75 73-74 73-75 73-75 73 74-75 69 70-74 76 69-76 69 69-76 69-71 76 84-90 86-93 90-93 89-93 90-93 91-92 91 92-93 92-93 87-88

GRAND CARAVAN SE

DAYTONA - SHELBY Z DAYTONA - TURBO DAYTONA - TURBO Z DIPLOMAT DIPLOMAT MEDALLION DIPLOMAT - S DIPLOMAT - SALON DIPLOMAT - SE DIPLOMAT - SPORT DURANGO

DURANGO ADVENTURER DURANGO - LIMITED DURANGO - SLT DURANGO - SXT DYNASTY DYNASTY - LE GRAND CARAVAN

GRAND CARAVAN ES GRAND CARAVAN LE

GRAND CARAVAN SPORT GRAND CARAVAN SXT INTREPID

INTREPID - ES

132

CID 135 153 135 135 135 225 318 360 225 318 360 225 318 225 318 360 318 225 318 226 239 285 287 318 345 360 285 345 285 345 226 285 345 226 285 153 181 201 153 181 201 148 181 201 230

cc 2507

3687

3687 3687 3687

3687

2507 2972 2507 2972 2429 2972

201 230

Liter

Description

Years

2.2 2.5 2.2 2.2 2.2 3.7 Cast Crankshaft 5.2 5.9

89-90 89-91 87-88 84-85 86 78-81 77-81 78-79

3.7 5.2 5.9 3.7 5.2 3.7 5.2 5.9 5.2 3.7 5.2 3.7 3.9 4.7 4.7 5.2 5.7 5.9

78-83 77-83 78-79 78 78 79-83 79-89 79 84-89 81 81 04-05 98-99 02-05 00-01 98-00 04-05 98-03

4.7 5.7 4.7 5.7 3.7 4.7 5.7 3.7 4.7 2.5 3.0 3.3 2.5 3.0 3.3 2.4 3.0 3.3 3.8

Cast Crankshaft Cast Crankshaft Cast Crankshaft

Cast Crankshaft OHV

Hemi

Hemi Hemi Hemi

Mits 6G72 SOHC OHV Mits 6G72 SOHC OHV DOHC Mits 6G72 SOHC OHV OHV

06 06 06 06 06 06 06 06 06 88-93 88-93 90-93 88 88-93 90-93 96-97 94-00 97-06 98-05

3.3 OHV 3.8 OHV

93-01 94-01

181 201 230

2972

3.0 Mits 6G72 SOHC 3.3 OHV 3.8 OHV

88-89 90-97 94-97

148 153 181 201 230

2429 2507 2972

2.4 2.5 3.0 3.3 3.8

96-97 88 88-97 90-06 97

201 230 230 167 197 201 215

2700 3200 3497

215

3497

167 197 201 215

2700 3200

215

3497

DOHC Mits 6G72 SOHC OHV OHV

3.3 OHV 3.8 OHV

01-03 01-03

3.8 2.7 3.2 3.3 3.5

06 98-01 98-01 93-97 00-01

OHV

SOHC OHV SOHC (Aluminum Block) 3.5 SOHC (Cast Iron Block) 2.7 3.2 SOHC 3.3 OHV 3.5 SOHC (Aluminum Block) 3.5 SOHC (Cast Iron Block)

93-97 00-01 00 93-95 02-04 93-97

DODGE DODGE MODEL INDEX (Cont’d.) CID

INTREPID - POLICE

Model

215

3497

INTREPID - R/T

215

3497

INTREPID - SE INTREPID - SXT

167 215

2700 3497

LANCER

135 153 170 225 413 135 153 135 153 318 440 318 440 345 167 215

2700 3497

MAGNUM - SXT

215

3497

MAGNUM - SXT SPECIAL EDITION

215

3497

LANCER - ES LANCER - SHELBY M300 M350 MAGNUM - R/T MAGNUM - SE

MAGNUM - XE MATADOR MINI RAM

MIRADA MONACO

MONACO - 500 MONACO BROUGHAM

MONACO CRESTWOOD MONACO - CUSTOM MONACO - ES MONACO - LE NEON NEON - ACR NEON - HIGHLINE NEON - R/T NEON - SE NEON - SPORT NEON - SXT OMNI OMNI - 024

318 360 400 318 361 135 153 156 181 225 318 360 225 318 360 383 400 413 426 426 440 318 383 440 225 318 360 400 440 360 400 360 400 440 181 181 122 122 122 122 122 122 122 122 122 122 135 135

2507 3687 2507 2507

2507 2555 2972 3687 3687

3687

2972 2972 1996 1996 1996 1996 1996 1996 1996 1996 1996 1996

Liter

Description

3.5 SOHC (Aluminum Block) 3.5 SOHC (Aluminum Block) 2.7 3.5 SOHC (Aluminum Block) 2.2 2.5 2.8 3.7 Forged Crankshaft 6.8 2.2 2.5 2.2 2.5 5.2 7.2 5.2 7.2 5.7 Hemi 2.7 3.5 SOHC (Aluminum Block) 3.5 SOHC (Aluminum Block)

Years 04 00-02 02-04 03-04 85-89 86-89 62 61-62 61-62 85-88 86-89 89 89 74 74 74 74 05-06 05-06 06

P200 - POST OFFICE P300 POLARA

POLARA - 500 05-06

3.5 SOHC (Aluminum Block) 5.2 5.9 6.6 5.2 5.9 2.2 2.5 2.6 Mits G54B (SOHC) 3.0 Mits 6G72 SOHC 3.7 Cast Crankshaft 5.2 5.9 3.7 Cast Crankshaft 5.2 5.9 6.3 6.6 6.8 7.0 (Excl. Hemi) 7.0 Hemi 7.2 5.2 6.3 7.2

78-79 78-79 78 60 60 84-87 87-88 84-87 87-88 80-83 80-83 80 77-78 68-78 71-78 67-71 72-78 65 65 65-66 66-78 68 68 68

3.7 Cast Crankshaft 5.2 5.9 6.6 7.2

77-78 77-78 74-78 74-78 74-78

5.9 6.6 5.9 6.6 7.2 3.0 3.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.2 2.2

77-78 77-78 74 74 74 90-92 90-92 96-99 95-01 02 96-97 95-97 01-04 02-05 95-97 95-97 03-05 81-90 81-82

Mits 6G72 SOHC Mits 6G72 SOHC 16V DOHC 16V SOHC 16V SOHC 16V DOHC 16V SOHC 16V SOHC 16V SOHC 16V DOHC 16V SOHC 16V SOHC

Model OMNI - 024 MISER OMNI - CUSTOM OMNI - E-TYPE OMNI - MISER OMNI - SE P100 P200

POLARA BROUGHAM POLARA - CUSTOM

CID 135 135 135 135 135 225 225 360 225 225 360 170 225 273 318 360 361 383 400 413 426 426 440 318 383 440 383 440 225 318 360 383 400 440

POWER RAM 50 RAIDER RAM 1500 - LARAMIE RAM 1500 - SLT RAM 1500 - SLT SPORT RAM 1500 - SLT TRX4 RAM 1500 - SPORT RAM 1500 - ST RAM 1500 - TRX4 RAM 1500 PICKUP

RAM 1500 VAN RAM 2500 - LARAMIE RAM 2500 - POWER WAGON RAM 2500 - SLT RAM 2500 - SPORT RAM 2500 - ST RAM 2500 - TRX4 RAM 2500 PICKUP

RAM 2500 VAN RAM 3500 - SPORT RAM 3500 - ST RAM 3500 PICKUP

133

156 156 181 285 345 285 345

3687 3687 3687 3687 3687

3687

2555 2555 2555 2972

Liter 2.2 2.2 2.2 2.2 2.2 3.7 3.7 5.9 3.7 3.7 5.9 2.8 3.7 4.5 5.2 5.9 5.9 6.3 6.6 6.8 7.0 7.0 7.2 5.2 6.3 7.2 6.3 7.2 3.7 5.2 5.9 6.3 6.6 7.2 2.6 2.6 2.6 3.0 4.7 5.7 4.7 5.7

345 345 345 226 285 345 285 345 225 226 239 285 287 318 345 360 239 318 360 345

5.7 5.7 5.7 3.7 4.7 5.7 4.7 5.7 3.7 3.7 3.9 4.7 4.7 5.2 5.7 5.9 3.9 5.2 5.9 5.7

345 345 345 345 345 488 318 345 360 318 360 345 345 488

5.7 5.7 5.7 5.7 5.7 8.0 5.2 5.7 5.9 5.2 5.9 5.7 5.7 8.0

7990

Description

Forged Crankshaft Forged Crankshaft Forged Crankshaft Forged Crankshaft Forged Crankshaft

(Excl. Hemi) Hemi

Forged Crankshaft

Mits G54B (SOHC) Mits G54B (SOHC) Mits G54B (SOHC) Mits 6G72 SOHC Hemi Hemi Hemi Hemi Hemi Hemi Hemi OHV

Hemi OHV Hemi Hemi Hemi Hemi Hemi Hemi Hemi

Hemi Hemi

Years 81-82 83 82 81-82 84-86 68 68-72 70-72 68 68-72 71-72 63-64 63-71 64-67 60-73 71-73 60-64 68-71 72-73 61-65 64-65 64-67 66-73 68-69 68-69 68-69 71 71 70 70-73 71-73 70-71 72-73 70-73 83 85-86 87-89 89 06 06 06 06 06 06 06 06 06 06 06 06 02-04 05 94-01 05 02-04 94-01 03-05 94-03 99-03 99-03 99-03 06 06 06 06 06 06 94-03 94-98 03-05 94-02 99-03 99-03 06 06 94-03

DODGE DODGE MODEL INDEX (Cont’d.) Model

CID

RAM 3500 PICKUP RAM 3500 PICKUP QUAD CAB RAM 3500 VAN RAM 50

RAM 50 - ROYAL

RAMPAGE RAMPAGE - 2+2 RD200 RD200 PICKUP ROYAL MINI RAM ROYAL MONACO

ROYAL MONACO BROUGHAM SHADOW SHADOW - AMERICA SHADOW - ES SHADOW - SHELBY SPIRIT SPIRIT - ES SPIRIT - LE SPIRIT - R/T ST. REGIS STEALTH

Engine Set No. Sizes Available

Years

360 318 360 122

5.9 5.2 5.9 2.0 2.4 2.6 3.0 3.0 2.0 2.0 2.6 2.0 2.3 2.6 2.4 3.0 3.0 2.3 2.6 3.7 3.7 5.2 5.9 6.6 7.2 2.2 2.2 5.2 5.9 5.2 5.9 2.2 2.6 3.0 5.2 5.9 6.6 7.2

98 99-03 99-03 87-89 90-93 85-89 91 90-91 84-86 83 84-89 84 83-85 83-85 90-93 91 91 83-84 83-89 76-80 74-76 74-93 74-93 76-78 74-78 82-84 84 78-79 78-79 80 80 84-87 84-87 87 75-77 75-77 75-77 75-77

181 181 143 156 225 225 318 360 400 440 135 135 318 360 318 360 135 156 181 318 360 400 440

RAMCHARGER

Description

03-05 94-02

RAM 50 - SE RAM 50 - SPORT

Liter

5.7 Hemi 5.9

156 181 181 122 122 156 122 143 156

RAM 50 - CUSTOM

345 360

360 400 440 135 153 181 135 153 153 181 135 153 181 153 181 153 181 135 225 318 360 181 181

Type and Location

1995 2351 2555 2972 2972 1995 1997 2555 1995 2346 2555 2351 2972 2972 2346 2555 3687 3687

2555 2972

2507 2972 2507 2507 2972 2507 2972 2507 2972 2507 2972 3687 2972 2972

5.9 6.6 7.2 2.2 2.5 3.0 2.2 2.5 2.5 3.0 2.2 2.5 3.0 2.5 3.0 2.5 3.0 2.2 3.7 5.2 5.9 3.0 3.0

Mits 4G63/G63B Mits 4G64 Mits G54B (SOHC) Mits 6G72 DOHC Mits 6G72 SOHC Mits 4G63/G63B Mits 4G52/G52B Mits G54B (SOHC) Mits 4G63/G63B Mits 4D55 Mits G54B (SOHC) Mits 4G64 Mits 6G72 DOHC Mits 6G72 SOHC Mits 4D55 Mits G54B (SOHC) Cast Crankshaft Forged Crankshaft

Mits G54B (SOHC) Mits 6G72 SOHC

Mits 6G72 SOHC

Mits 6G72 SOHC Mits 6G72 SOHC Mits 6G72 SOHC Mits 6G72 SOHC Cast Crankshaft Mits 6G72 DOHC Mits 6G72 SOHC

Standard Shaft Size

Housing Bore

75-77 75-77 75-77 87-94 88-94 93 91-92 92 91-94 92-94 89 89-95 90-95 89-93 89-93 89-92 90-92 91-92 79-81 79-81 79-80 91-96 91-92

Model

CID

Liter

STEALTH - ES STEALTH - R/T STEALTH - R/T SPORT STEALTH - R/T TURBO STRATUS

181 181 181 181 122 148 152 167 181 122 148 152 167 181 167 170 318 488 488 488 225 225 239 318 360 383 400 440 225 318 225 239 318 360 400 440 239 318 360 225 225 318 360 383 400 440 225 318 318 360 225 225 318 360 383 400 440 225 318 318 360

2972 2972 2972 2972 1996 2429 2497 2700 2972 1996 2429 2497 2700 2972 2700

3.0 3.0 3.0 3.0 2.0 2.4 2.5 2.7 3.0 2.0 2.4 2.5 2.7 3.0 2.7 2.8 5.2 8.0 8.0 8.0 3.7 3.7 3.9 5.2 5.9 6.3 6.6 7.2 3.7 5.2 3.7 3.9 5.2 5.9 6.6 7.2 3.9 5.2 5.9 3.7 3.7 5.2 5.9 6.3 6.6 7.2 3.7 5.2 5.2 5.9 3.7 3.7 5.2 5.9 6.3 6.6 7.2 3.7 5.2 5.2 5.9

STRATUS - ES STRATUS - R/T STRATUS - SXT TRUCK VIPER VIPER - GTS VIPER - RT10 W100 PICKUP

W100 SERIES W150 PICKUP

W150 PICKUP - S W200 PICKUP

W200 SERIES W250 PICKUP W300 PICKUP

W300 SERIES W350 PICKUP WM300 POWER WAGON

Max. Bearing Thickness

Vertical Oil Clearance

ENGINE

VIN CYL

Bore x Stroke

1410cc (1.4) Mits G12B 1410cc (1.4) Mits G12B 1410cc (1.4) Mits G12B

2 A J

74mm x 82mm 74mm x 82mm 74mm x 82mm

L4 L4 L4

7990 7990 7990 3687 3687

3687 3687

3687

3687 3687

3687

Description

Years

Mits 6G72 DOHC Mits 6G72 DOHC Mits 6G72 DOHC Mits 6G72 DOHC 16V SOHC DOHC Mits 6G73 Mits 6G72 SOHC 16V SOHC DOHC Mits 6G73 Mits 6G72 SOHC

Cast Crankshaft Forged Crankshaft OHV

Forged Crankshaft Cast Crankshaft OHV

OHV Cast Crankshaft Forged Crankshaft

Forged Crankshaft

Cast Crankshaft Forged Crankshaft

Forged Crankshaft

318

5.2

Max. Overall Length

Material Code

91-93 91-96 94-95 91-96 95-00 95-02 99-00 01-05 01 95-97 95-98 95-98 06 02-05 06 60 59 92-02 96-02 00-02 76-87 68-76 89 68-89 72-88 68-71 71-77 74-77 60-67 60-67 78-87 89-93 77-93 77-93 77-78 78 90-91 90-91 91 76-80 69-76 69-80 71-80 69-71 71-78 74-78 60-67 60-67 81-93 81-93 76-78 68-76 68-80 71-80 68-69 76-78 75-78 63-67 60-67 82-83 81-93 60-62

Qty. Set

Bearing Shell No.

TORQUE SETTINGS Connecting Rod 23-25 ft.lbs/31-34 Nm Main Bearing 36-40 ft.lbs/49-54 Nm

Rod

4B1736 Std. .25 .50 .75 1.0

41.981/1.6528 42.000/1.6535

45.000/1.7717 45.020/1.7724

1.493/0.0588 .015/.0006 .071/.0028

134

17.63/0.694

F820

1736AL IH

DODGE Type and Location

Standard Shaft Size

Max. Bearing Thickness

Housing Bore

Vertical Oil Clearance

Max. Overall Length

Material Code

Qty. Set

Bearing Shell No.

Engine Set No. Sizes Available

(Contâ&#x20AC;&#x2122;d.) Main - full groove on #1,2,4,5 positions. 1,2,4,5 47.981/1.8890 52.000/2.0472 48.000/1.8898 52.020/2.0480

1.990/0.0783 .020/.0008 .076/.0030

19.13/0.753

47.980/1.8890 52.000/2.0472 1.990/0.0783 .020/.0008 48.000/1.8898 52.020/2.0480 .076/.0030 Overflange length remains constant for standard and undersizes.

23.95/0.943

3(Fl)

ENGINE

VIN CYL

Bore x Stroke

90 1468cc (1.5) Mits G15B/4G15 90 1468cc (1.5) Mits G15B/4G15 90 1468cc (1.5) Mits G15B/4G15 90 1468cc (1.5) Mits G15B/4G15

A K P X

75.5mm x 82mm 75.5mm x 82mm 75.5mm x 82mm 75.5mm x 82mm

L4 L4 L4 L4

15.60/0.614

Rod - for engines 1985 - 8/88 only. 41.981/1.6528 45.000/1.7717 42.000/1.6535 45.020/1.7724

1.493/0.0588 .015/.0006 .071/.0028

17.63/0.694

1.990/0.0783 .020/.0008 .085/.0033

19.13/0.753

47.981/1.8890 52.000/2.0472 1.990/0.0783 .020/.0008 48.000/1.8898 52.020/2.0480 .085/.0033 Overflange length remains constant for standard and undersizes.

23.95/0.943

52.000/2.0472 52.020/2.0480

3(Fl)

ENGINE

VIN CYL

1595cc (1.6) Mits 4G61 (DOHC) 1595cc (1.6) Mits 4G61T (DOHC) Turbo

1737AL IH

5M1737 Std. .25 .50 .75 1.0

1738AL IH

Bore x Stroke

Connecting Rod 23-25 ft.lbs/31-34 Nm Main Bearing 36-40 ft.lbs/49-54 Nm

1.493/0.0588 .015/.0006 .079/.0031

47.981/1.8890 48.000/1.8898

F820

TORQUE SETTINGS

Rod - for engines 8/88-1994. 41.981/1.6528 45.000/1.7717 42.000/1.6535 45.020/1.7724

Main 1,2,4,5

F820

F810

F820

F810 F810

8 2

4B1130

1130A IH

Std. .25 .50 .75 1.0

1736AL IH

Std. .25 .50 .75 1.0

1124A U/L

Std. .25 .50 .75

4B1736

5M1124

1125A IH

TORQUE SETTINGS

82.3mm x 75mm

Connecting Rod 23-25 ft.lbs/31-34 Nm Main Bearing 36-40 ft.lbs/49-54 Nm

Rod

Main 1,2,4,5

44.991/1.7713 45.000/1.7717

48.000/1.8898 48.020/1.8905

1.494/0.0588 .012/.0005 .067/.0026

23.50/0.925

56.980/2.2433 57.000/2.2441

61.000/2.4016 61.020/2.4024

1.990/0.0783 .020/.0008 .086/.0034

23.01/0.906

1,2,4,5

56.980/2.2433 61.000/2.4016 1.990/0.0783 57.000/2.2441 61.020/2.4024 3 (Fl) 56.980/2.2433 61.000/2.4016 1.990/0.0783 57.000/2.2441 61.020/2.4024 Overflange length remains constant for standard and undersizes.

.020/.0008 .086/.0034 .020/.0008 .086/.0034

F810

23.01/0.906

F810

28.95/1.140

F810

ENGINE

VIN CYL

Bore x Stroke

98 1597cc (1.6) Mits 4G32/G32B 98 1597cc (1.6) Mits 4G32/G32B 98 1597cc (1.6) Mits 4G32/G32B Turbo 98 1597cc (1.6) Mits 4G32/G32B 98 1597cc (1.6) Mits 4G32/G32B 98 1597cc (1.6) Mits 4G32/G32B Turbo

3 B

L4 L4

76.9mm x 86mm 76.9mm x 86mm

F K Y

L4 L4 L4

76.9mm x 86mm 76.9mm x 86mm 76.9mm x 86mm

76.9mm x 86mm

4B1146

1146A IH

Std. .25 .50 .75 1.0

1147A U

Std. .25 .50 .75 1.0

5M1144

1144A L 1148A IH

TORQUE SETTINGS

Connecting Rod 23-25 ft.lbs/31-34 Nm Main Bearing 36-40 ft.lbs/49-54 Nm

Rod 44.991/1.7713 45.000/1.7717

48.000/1.8898 48.020/1.8905

1.494/0.0588 .012/.0005 .067/.0026

135

23.50/0.925

F810

1146A IH

4B1146 Std. .25 .50 .75 1.0

DODGE Engine Set No. Sizes Available

Type and Location

Max. Overall Length

Material Code

Qty. Set

Bearing Shell No.

1.990/0.0783 .020/.0008 .086/.0034

23.01/0.906

F810

1147A U

1.990/0.0783 .020/.0008 .086/.0034

23.01/0.906

F810

1144A L

56.980/2.2433 61.000/2.4016 1.990/0.0783 .020/.0008 57.000/2.2441 61.020/2.4024 .086/.0034 Overflange length remains constant for standard and undersizes.

28.95/1.140

F810

1148A IH

Standard Shaft Size

Housing Bore

56.980/2.2433 57.000/2.2441

61.000/2.4016 61.020/2.4024

56.980/2.2433 57.000/2.2441

61.000/2.4016 61.020/2.4024

Max. Bearing Thickness

Vertical Oil Clearance

(Contâ&#x20AC;&#x2122;d.) 5M1144

Main 1,2,4,5

Std. .25 .50 .75 1.0 1,2,4,5 3 (Fl)

3BS8385 Std.

5SC761 Std.

Balance Shaft 38.974/1.5344 RHF (Max.)

42.024/1.6545 (Max.)

1.506/0.0593 .020/.0008 .076/.0030

19.25/0.758

F830

SH1465

RHR, LHR

39.025/1.5364 (Max.)

1.496/0.0589 .043/.0017 .099/.0039

16.00/0.630

F830

SH1466

Cam Tower - Includes oil holes for upper position and wide bearings for #1 position.Line bore tunnel to 1.4966"/1.4976" (38.014/38.038mm). 33.924/1.3356 38.014/1.4966 2.006/0.0790 .041/.0016 22.96/0.904 F23 2 1 33.950/1.3366 38.038/1.4976 .104/.0041 2,3,4,5 2,3,4,5

35.977/1.4164 (Max.)

33.924/1.3356 33.950/1.3366 33.924/1.3356 33.950/1.3366

ENGINE

38.014/1.4966 38.038/1.4976 38.014/1.4966 38.038/1.4976

VIN CYL

1754cc (1.8) Mits G37B (8V SOHC) T

2.006/0.0790 .041/.0016 .104/.0041 2.006/0.0790 .041/.0016 .104/.0041

Bore x Stroke 80.6mm x 86mm

20.14/0.793

F23

20.14/0.793

F23

SC762 U/L SC761 U SC760 L

TORQUE SETTINGS Connecting Rod 23-25 ft.lbs/31-34 Nm Main Bearing 36-40 ft.lbs/49-54 Nm

Rod

4B1146

44.991/1.7713 45.000/1.7717

Std. .25 .50 .75 1.0

5M1144 Std. .25 .50 .75 1.0

3BS8387 Std.

48.000/1.8898 48.020/1.8905

1.494/0.0588 .012/.0005 .067/.0026

Main 1,2,4,5

56.980/2.2433 61.000/2.4016 1.990/0.0783 57.000/2.2441 61.020/2.4024 1,2,4,5 56.980/2.2433 61.000/2.4016 1.990/0.0783 57.000/2.2441 61.020/2.4024 3 (Fl) 56.980/2.2433 61.000/2.4016 1.990/0.0783 57.000/2.2441 61.020/2.4024 Overflange length remains constant for standard and undersizes.

.020/.0008 .086/.0034 .020/.0008 .086/.0034 .020/.0008 .086/.0034

23.50/0.925

F810

1146A IH

23.01/0.906

F810

23.01/0.906

F810

28.95/1.140

F810

1147A U 1144A L 1148A IH

Balance Shaft 41.976/1.6526 RHF (Max.)

45.024/1.7726 (Max.)

1.505/0.0593 .025/.0010 .079/.0031

19.00/0.748

F818

8387

RHR, LHR

44.025/1.7333 (Max.)

1.495/0.0589 .025/.0010 .079/.0031

21.00/0.827

F818

8388

40.967/1.6129 (Max.)

ENGINE

VIN CYL

Bore x Stroke

112 1834cc (1.8) Mits 4G93 112 1834cc (1.8) Mits 4G93

C D

81mm x 89mm 81mm x 89mm

L4 L4

TORQUE SETTINGS Connecting Rod 15 ft.lbs/20 Nm + 1/4 turn Main Bearing 18 ft.lbs/25 Nm + 1/4 turn Tighten main bearing caps from center, working towards end caps.

Rod

4B8036 Std. .25 .50 .75 1.0

44.980/1.7709 48.000/1.8898 1.492/0.0587 .016/.0006 45.000/1.7717 48.015/1.8904 .077/.0030 To be superceded by 4B8036A when stock exhausted.

16.80/0.661

F780

8036 IH

1.492/0.0587 .016/.0006 .077/.0030

16.80/0.661

F810

8036A IH

49.982/1.9678 54.000/2.1260 1.991/0.0784 .018/.0007 50.000/1.9685 54.018/2.1267 .080/.0031 To be superceded by 5M8037A when stock exhausted.

19.13/0.753

F780

8037 U/L

Rod

4B8036A

44.980/1.7709 45.000/1.7717

Std. .25 .50 .75 1.0

5M8037 Std. .25 .50

48.000/1.8898 48.015/1.8904

Main 1-5

136

DODGE Type and Location

Standard Shaft Size

Max. Bearing Thickness

Housing Bore

Vertical Oil Clearance

Max. Overall Length

Material Code

Qty. Set

Bearing Shell No.

Engine Set No. Sizes Available

(Contâ&#x20AC;&#x2122;d.) Main 1-5

49.982/1.9678 50.000/1.9685

54.000/2.1260 54.018/2.1267

1.991/0.0784 .018/.0007 .080/.0031

Thrust 3

56.000/2.2047 75.400/2.9685 56.250/2.2146 75.700/2.9803 Set includes 2 pieces, use on number 3 position. Required with 5M8037.

1.98/0.078

ENGINE

VIN CYL

Bore x Stroke

122 1995cc (2.0) Mits 4G52/G52B 122 1997cc (2.0) Mits 4G52/G52B

U 5

84mm x 90mm 84mm x 90mm

L4 L4

19.13/0.753

F810

F817

8037A U/L 8037T IH

5M8037A Std. .25 .50 .75 1.0

1T8037 Std.

TORQUE SETTINGS

Connecting Rod 33-34 ft.lbs/45-47 Nm Main Bearing 55-61 ft.lbs/75-83 Nm

Rod 52.973/2.0855 53.000/2.0866

56.007/2.2050 56.021/2.2055

1.493/0.0588 .021/.0008 .076/.0030

Main - to suit engines with 66mm/2.5984" journals 74 - 7/78. 1,2,4,5 65.979/2.5976 70.000/2.7559 1.990/0.0783 .012/.0005 66.000/2.5984 70.021/2.7567 .078/.0031 3 (Fl) 65.979/2.5976 70.000/2.7559 1.990/0.0783 .012/.0005 66.000/2.5984 70.021/2.7567 .078/.0031 Overflange length remains constant for standard and undersizes.

25.13/0.989

F820

F780

1136AL IH 1137 U/L 1138 IH

30.95/1.219

F780

Main - to suit engines with 60mm/2.3622" journals 8/78 - on. 1,2,4,5 59.973/2.3611 64.000/2.5197 1.990/0.0783 .020/.0008 60.000/2.3622 64.020/2.5205 .081/.0032

25.13/0.989

F820

1,2,4,5

1.990/0.0783 .020/.0008 .081/.0032

25.13/0.989

F820

1139AL L

59.973/2.3611 64.000/2.5197 1.990/0.0783 .020/.0008 60.000/2.3622 64.020/2.5205 .081/.0032 Overflange length remains constant for standard and undersizes.

30.95/1.219

F820

1135AL IH

59.973/2.3611 60.000/2.3622

64.000/2.5197 64.020/2.5205

3 (Fl)

1134AL U

Main - optional set to 5M1139 with overflange length increase for undersizes. *See below for dimensional information. 1,2,4,5 59.973/2.3611 64.000/2.5197 1.990/0.0783 .020/.0008 25.13/0.989 F820 4 1134AL 60.000/2.3622 64.020/2.5205 .081/.0032 U 1,2,4,5 59.973/2.3611 64.000/2.5197 1.990/0.0783 .020/.0008 25.13/0.989 F820 4 1139AL 60.000/2.3622 64.020/2.5205 .081/.0032 L 3 (Fl)

59.973/2.3611 60.000/2.3622

64.000/2.5197 64.020/2.5205

1.990/0.0783 .020/.0008 .081/.0032

(See Table)

F820

4B1136 Std. .25 .50 .75 1.0

5M1137 Std. .25 .50 .75 1.0

5M1139 Std. .25 .50 .75 1.0

5M1143 .25 .50 .75 1.0

1143AL IH

* DIMENSIONAL INFORMATION FOR 5M1143 Overall Width (Nominal) Increase in Width 0.25 mm u/s shaft 1.223"/31.05mm +0.004"/0.10mm 0.50 mm u/s shaft 1.226"/31.13mm +0.007"/0.18mm 0.75 mm u/s shaft 1.229"/31.21mm +0.010"/0.25mm 1.00 mm u/s shaft 1.232"/31.29mm +0.013"/0.34mm Balance Shaft - repair bushing. Single piece +.173" OD. Line bore housing to 1.985"/1.986". 43.009/1.6933 50.419/1.9850 3.680/0.1450 .025/.0010 20.24/0.797 F23 43.025/1.6939 50.444/1.9860 .089/.0035 Balance Shaft - grooved number 2 & 3 position bearings. 2,3 43.009/1.6933 46.030/1.8122 1.478/0.0582 43.025/1.6939 46.050/1.8130 1 22.959/0.9039 26.000/1.0236 1.505/0.0593 22.980/0.9047 26.021/1.0244

8288 OOD

Std.

20.24/0.797

F818

8288

18.00/0.709

F818

8289

Balance Shaft - ungrooved number 2 & 3 position bearings. 43.009/1.6933 46.030/1.8122 1.478/0.0582 2,3 43.025/1.6939 46.050/1.8130

20.24/0.797

F818

8369

18.00/0.709

F818

8289

22.959/0.9039 22.980/0.9047

26.000/1.0236 26.021/1.0244

1BS8288

3BS8288 Std. .25

3BS8369 Std. .25

1.505/0.0593

137

DODGE Engine Set No. Sizes Available

Standard Shaft Size

Housing Bore

Max. Bearing Thickness

Vertical Oil Clearance

Max. Overall Length

Material Code

Qty. Set

Bearing Shell No.

(Contâ&#x20AC;&#x2122;d.)

5SC761 Std.

Type and Location

SC762 U/L

2,3,4,5

33.924/1.3356 33.950/1.3366

38.014/1.4966 38.038/1.4976

2.006/0.0790 .041/.0016 .104/.0041

20.14/0.793

F23

SC761 U

2,3,4,5

33.924/1.3356 33.950/1.3366

38.014/1.4966 38.038/1.4976

2.006/0.0790 .041/.0016 .104/.0041

20.14/0.793

F23

SC760 L

ENGINE

VIN CYL

Bore x Stroke

122 1995cc (2.0) Mits 4G63/G63B 122 1997cc (2.0) Mits 4G63/G63B 122 1997cc (2.0) Mits 4G63 DOHC 122 1997cc (2.0) Mits 4G63/G63B

D D R V

85mm x 88mm 85mm x 88mm 85mm x 88mm 85mm x 88mm

L4 L4 L4 L4

TORQUE SETTINGS Connecting Rod 23-25 ft.lbs/31-34 Nm Main Bearing 36-40 ft.lbs/49-54 Nm

Rod

4B1146

44.991/1.7713 45.000/1.7717

48.000/1.8898 48.020/1.8905

1.494/0.0588 .012/.0005 .067/.0026

23.50/0.925

F810

1146A IH

Main - half groove. 1,2,4,5 56.980/2.2433 57.000/2.2441 Std. .25 .50 .75 1.0

61.000/2.4016 61.020/2.4024

1.990/0.0783 .020/.0008 .086/.0034

23.01/0.906

F810

1147A U

61.000/2.4016 61.020/2.4024

1.990/0.0783 .020/.0008 .086/.0034

23.01/0.906

F810

1144A L

56.980/2.2433 61.000/2.4016 1.990/0.0783 .020/.0008 57.000/2.2441 61.020/2.4024 .086/.0034 Overflange length remains constant for standard and undersizes.

28.95/1.140

F810

1148A IH

23.00/0.906

F810

28.95/1.140

F810

1147A IH 1148A IH

19.00/0.748

F818

8387

21.00/0.827

F818

8388

Balance Shaft - for all engines from 8/85 on. 41.976/1.6526 45.024/1.7726 1.505/0.0593 .025/.0010 RHF (Max.) (Max.) .079/.0031

19.00/0.748

F818

8387

LHR

21.00/0.827

F818

8388

21.00/0.827

F818

8389

Std. .25 .50 .75 1.0

5M1144

1,2,4,5

56.980/2.2433 57.000/2.2441

3 (Fl)

Main - full groove. 1,2,4,5 56.980/2.2433 61.000/2.4016 1.990/0.0783 Std. .25 .50 .75 1.0 57.000/2.2441 61.020/2.4024 3 (Fl) 56.980/2.2433 61.000/2.4016 1.990/0.0783 57.000/2.2441 61.020/2.4024 Overflange length remains constant for standard and undersizes.

5M1147

3BS8387 Std.

Balance Shaft - for all engines from 1984-7/85. 41.976/1.6526 45.024/1.7726 1.505/0.0593 .025/.0010 RHF (Max.) (Max.) .079/.0031 RHR, LHR

3BS8389 Std. .25 .50

RHR

.020/.0008 .086/.0034 .020/.0008 .086/.0034

40.967/1.6129 (Max.)

40.967/1.6129 (Max.) 40.967/1.6129 (Max.)

44.025/1.7333 (Max.)

44.025/1.7333 (Max.) 44.025/1.7333 (Max.)

1.495/0.0589 .025/.0010 .079/.0031

1.495/0.0589 .025/.0010 .079/.0031 1.495/0.0589 .025/.0010 .079/.0031

ENGINE

VIN CYL

Bore x Stroke

122 1996cc (2.0) 16V SOHC 122 1996cc (2.0) 16V SOHC 122 1996cc (2.0) 16V DOHC 122 1996cc (2.0) 16V SOHC (ECB) 122 1996cc (2.0) 16V DOHC (ECC) 122 1996cc (2.0) 16V DOHC (ECF)

C F Y C Y Y

87.5mm x 83mm 87.5mm x 83mm 87.5mm x 83mm 87.5mm x 83mm 87.5mm x 83mm 87.5mm x 83mm

L4 L4 L4 L4 L4 L4

Rod

4B1635P Std. .25 .50 .75 1.0

4B1635PO/S2 Std. .25 .50 .75

47.991/1.8894 48.006/1.8900

50.991/2.0075 51.006/2.0081

1.490/0.0587 .005/.0002 .061/.0024

Rod - .002" oversize OD version of 4B1635P. 47.991/1.8894 51.041/2.0095 1.640/0.0646 .005/.0002 48.006/1.8900 51.056/2.0101 (@ .25 mm u/s) .061/.0024

138

20.50/0.807

F780

7171 IH

20.50/0.807

F780

9091 IH

DODGE Type and Location

Standard Shaft Size

Max. Bearing Thickness

Housing Bore

Vertical Oil Clearance

Max. Overall Length

Material Code

Qty. Set

Bearing Shell No.

Engine Set No. Sizes Available

(Contâ&#x20AC;&#x2122;d.) Main - suits engines from 1996 on. 51.991/2.0469 55.997/2.2046 1,2,4,5 52.006/2.0475 56.007/2.2050

1.986/0.0782 .018/.0007 .071/.0028

19.96/0.786

3 (Fl)

51.991/2.0469 55.997/2.2046 1.986/0.0782 .018/.0007 52.006/2.0475 56.007/2.2050 .071/.0028 Overflange length remains constant for standard and undersizes.

26.26/1.034

F780

4343 U/L

Main - .002" oversize OD version of 5M2028P. 51.991/2.0469 56.048/2.2066 2.011/0.0792 .018/.0007 1,2,4,5 52.006/2.0475 56.058/2.2070 (@ STD u/s) .071/.0028

19.96/0.786

F780

9093 U/L

3 (Fl)

26.26/1.034

F780

9094 U/L

19.96/0.786

F780

4372 L 4342 U

51.991/2.0469 56.048/2.2066 2.011/0.0792 .018/.0007 52.006/2.0475 56.058/2.2070 (@ STD u/s) .071/.0028 Overflange length remains constant for standard and undersizes. Main - 1995 engines only (opposite tang position in lower half). 51.991/2.0469 55.997/2.2046 1.986/0.0782 .018/.0007 1,2,4,5 52.006/2.0475 56.007/2.2050 .071/.0028 1,2,4,5 51.991/2.0469 55.997/2.2046 1.986/0.0782 .018/.0007 52.006/2.0475 56.007/2.2050 .072/.0028

F780

19.96/0.786

F780

51.991/2.0469 52.006/2.0475

55.997/2.2046 56.007/2.2050

1.986/0.0782 .018/.0007 .072/.0028

26.26/1.034

F780

4373 L

3 (Fl)

51.991/2.0469 52.006/2.0475

55.997/2.2046 56.007/2.2050

1.986/0.0782 .018/.0007 .072/.0028

26.26/1.034

F780

4343 U

1.026/0.0404

20.70/0.815

F23

PDA-3-1

1.031/0.0406

19.68/0.775

F23

PDA-3-2

Cam - SOHC Engines only. 41.123/1.6190 43.269/1.7035 1 41.145/1.6199 (Nominal) 2 41.504/1.6340 43.675/1.7195 41.529/1.6350 (Nominal)

Std. .25 .50 .75

5M2028PO/S2 .25 .50 .75

5M4372P Std. .25 .50 .75

5C1004S Std.

41.910/1.6500 41.935/1.6510

44.056/1.7345 (Nominal)

1.021/0.0402

19.68/0.775

F23

PDA-3-3

42.316/1.6660 42.367/1.6680 42.723/1.6820 42.746/1.6829

44.463/1.7505 (Nominal) 44.869/1.7665 (Nominal)

1.026/0.0404

19.68/0.775

F23

PDA-3-4

1.026/0.0404

18.92/0.745

F23

PDA-3-5

5M2028P

4342 U/L

3 (Fl)

ENGINE

VIN CYL

Bore x Stroke

135 (2.2) 135 (2.2) Turbo 135 (2.2) 135 (2.2) 135 (2.2) Turbo 135 (2.2) 135 (2.2) Turbo 153 2507cc (2.5) 153 2507cc (2.5) Turbo 153 2507cc (2.5)

8 A B C C D E G J K

87.5mm x 92mm 87.5mm x 92mm 87.5mm x 92mm 87.5mm x 92mm 87.5mm x 92mm 87.5mm x 92mm 87.5mm x 92mm 87.5mm x 108mm 87.5mm x 108mm 87.5mm x 108mm

L4 L4 L4 L4 L4 L4 L4 L4 L4 L4

TORQUE SETTINGS

Connecting Rod 40 ft.lbs/54 Nm + 1/4 turn Main Bearing 30 ft.lbs/41 Nm + 1/4 turn

Rod 49.980/1.9677 50.005/1.9687

52.989/2.0862 53.007/2.0869

1.483/0.0584 .018/.0007 .087/.0034

Main - All engines 1,2,4,5 59.987/2.3617 63.990/2.5193 1.976/0.0778 60.013/2.3627 64.008/2.5200 3 (Fl) 59.987/2.3617 63.990/2.5193 1.976/0.0778 60.013/2.3627 64.008/2.5200 Overflange length remains constant for standard and undersizes.

.025/.0010 .095/.0037 .025/.0010 .095/.0037

139

20.04/0.789

21.46/0.845 27.86/1.097

F780

F780 F780

8 2

4360 IH 4358 IH 4359 IH

4B1269P Std. 10 20 30 40

5M1533P Std. 10 20 30 40

DODGE Engine Set No. Sizes Available

Type and Location

Standard Shaft Size

Housing Bore

Max. Bearing Thickness

Vertical Oil Clearance

Max. Overall Length

Material Code

Qty. Set

Bearing Shell No.

10 (Contâ&#x20AC;&#x2122;d.) 5M4369P 10 20 30 40

59.987/2.3617 63.990/2.5193 60.013/2.3627 64.008/2.5200 Stock not available from fee warehouses.

.010" u/s shaft .020" u/s shaft .030" u/s shaft .040" u/s shaft

2BS1403S Semi

2C026S Std.

1.976/0.0778 .025/.0010 .095/.0037

28.12/1.107

F780

4369 IH

* DIMENSIONAL INFORMATION FOR 5M4369P Overall Width (Nominal) Increase in Width 1.107" +0.010" 1.107" +0.010" 1.107" +0.010" 1.107" +0.010"

Balance Shaft - 2.5L engines only (semi-finished) 42.012/1.6540 45.350/1.7854 2.032/0.0800 (Nominal) 45.410/1.7878 (Semi)

22.10/0.870

F23

PDG-29-1

Balance Shaft - 2.2L engines only. 42.670/1.6799 45.970/1.8098 1 42.695/1.6809 46.030/1.8122

1.633/0.0643

19.05/0.750

F23

PDG-26-1

1.633/0.0643

21.08/0.830

F23

PDG-26-2

19.670/0.7744 19.693/0.7753

ENGINE

22.970/0.9043 23.030/0.9067

VIN CYL

143 2346cc (2.3) Mits 4D55 Turbo Diesel 143 2346cc (2.3) Mits 4D55 Turbo Diesel

Bore x Stroke

91.1mm x 90mm

TORQUE SETTINGS Connecting Rod 33-34 ft.lbs/45-47 Nm Main Bearing 55-61 ft.lbs/75-83 Nm

Rod

4B1136

52.973/2.0855 53.000/2.0866

Std. .25 .50 .75 1.0

5M1137 Std. .25 .50 .75 1.0

3BS8288 Std. .25

1.493/0.0588 .021/.0008 .076/.0030

Main 1,2,4,5

65.979/2.5976 70.000/2.7559 1.990/0.0783 66.000/2.5984 70.021/2.7567 3 (Fl) 65.979/2.5976 70.000/2.7559 1.990/0.0783 66.000/2.5984 70.021/2.7567 Overflange length remains constant for standard and undersizes. Balance Shaft 43.009/1.6933 2,3 43.025/1.6939 1

RB4091

56.007/2.2050 56.021/2.2055

22.959/0.9039 22.980/0.9047

.012/.0005 .078/.0031 .012/.0005 .078/.0031

25.13/0.989

F820

1136AL IH

25.13/0.989

F780

30.95/1.219

F780

1137 U/L 1138 IH

46.030/1.8122 46.050/1.8130

1.478/0.0582

20.24/0.797

F818

8288

26.000/1.0236 26.021/1.0244

1.505/0.0593

18.00/0.709

F818

8289

31.90/1.256

F100

RB4091

Small End - Not bored - single pieces. 29.000/1.1417 32.000/1.2598

Semi

ENGINE

VIN CYL

Bore x Stroke

2351cc (2.4) Mits 4G64 2351cc (2.4) Mits 4G64

G W

86.5mm x 100mm 86.5mm x 100mm

4B1146 Std. .25 .50 .75 1.0

4B1185 Std. .25 .50 .75 1.0

L4 L4

TORQUE SETTINGS Connecting Rod 23-25 ft.lbs/31-34 Nm Main Bearing 36-40 ft.lbs/49-54 Nm

Rod - For engines to 5/92 only. 44.991/1.7713 48.000/1.8898 45.000/1.7717 48.020/1.8905

1.494/0.0588 .012/.0005 .067/.0026

23.50/0.925

F810

1146A IH

Rod - For engines from 6/92 on. 44.981/1.7709 47.998/1.8897 44.996/1.7715 48.019/1.8905

1.493/0.0588 .016/.0006 .078/.0031

21.10/0.831

F810

1185A IH

140

DODGE Type and Location

Standard Shaft Size

Max. Bearing Thickness

Housing Bore

Vertical Oil Clearance

Max. Overall Length

Material Code

Qty. Set

Bearing Shell No.

Engine Set No. Sizes Available

(Contâ&#x20AC;&#x2122;d.) Main - for engines to 5/92 only. 56.980/2.2433 61.000/2.4016 1,2,4,5 57.000/2.2441 61.020/2.4024

1.990/0.0783 .020/.0008 .086/.0034

23.01/0.906

1.990/0.0783 .020/.0008 .086/.0034

23.01/0.906

F810

1147A U

56.980/2.2433 61.000/2.4016 1.990/0.0783 .020/.0008 57.000/2.2441 61.020/2.4024 .086/.0034 Overflange length remains constant for standard and undersizes.

28.95/1.140

F810

1154A IH

1.990/0.0783 .020/.0008 .082/.0032

21.00/0.827

F810

1186A U/L

56.985/2.2435 61.000/2.4016 1.990/0.0783 .020/.0008 57.000/2.2441 61.021/2.4024 .082/.0032 Overflange length remains constant for standard and undersizes.

25.40/1.000

1,2,4,5

56.980/2.2433 57.000/2.2441

61.000/2.4016 61.020/2.4024

3 (Fl)

Main - for engines from 6/92 on. 1,2,4,5 56.985/2.2435 61.000/2.4016 57.000/2.2441 61.021/2.4024 3 (Fl)

F810

56.985/2.2435 61.000/2.4016 2.115/0.0833 .020/.0008 57.000/2.2441 61.021/2.4024 (@ 0.25 mm u/s) .082/.0032 Stock not available from fee warehouses.

25.65/1.010

F810

1153A L

5M1153 Std. .25 .50 .75

5M1186 Std. .25 .50 .75 1.0

1187A IH

1186A U/L

5M1213 .25 .50 .75 1.0

1213A IH

* DIMENSIONAL INFORMATION FOR 5M1213 Overall Width (Nominal) Increase in Width 0.25 mm u/s shaft 1.010"/25.65mm +0.010"/0.25mm 0.50 mm u/s shaft 1.010"/25.65mm +0.010"/0.25mm 0.75 mm u/s shaft 1.010"/25.65mm +0.010"/0.25mm 1.00 mm u/s shaft 1.010"/25.65mm +0.010"/0.25mm Balance Shaft 41.976/1.6526 RHF (Max.)

45.024/1.7726 (Max.)

1.505/0.0593 .025/.0010 .079/.0031

19.00/0.748

F818

8387

LHR

40.967/1.6129 (Max.)

44.025/1.7333 (Max.)

1.495/0.0589 .025/.0010 .079/.0031

21.00/0.827

F818

8388

RHR

40.967/1.6129 (Max.)

44.025/1.7333 (Max.)

1.495/0.0589 .025/.0010 .079/.0031

21.00/0.827

F818

8389

ENGINE

VIN CYL

Bore x Stroke

148 2429cc (2.4) DOHC 148 2429cc (2.4) DOHC 148 2429cc (2.4) DOHC (EDZ)

B X X

87.5mm x 101mm 87.5mm x 101mm 87.5mm x 101mm

L4 L4 L4

3BS8389 Std. .25 .50

TORQUE SETTINGS

Connecting Rod 21 ft.lbs/28 Nm + 90 deg turn Main Bearing 25 ft.lbs/34 Nm (M8 Bedplate Bolts) Main Bearing 30 ft.lbs/41 Nm + 90 deg turn (M11 Main Cap Bolts)

Rod 50.007/1.9688 50.025/1.9695

52.995/2.0864 53.007/2.0869

1.483/0.0584 .004/.0002 .060/.0024

Rod - .002" oversize OD version of 4B4565P. 50.007/1.9688 53.045/2.0884 1.633/0.0643 .004/.0002 50.025/1.9695 53.057/2.0889 (@ 0.25 mm u/s) .060/.0024 Main 1,2,4,5

59.992/2.3619 60.007/2.3625

64.000/2.5197 64.013/2.5202

20.13/0.793

F780

9096 IH

21.62/0.851

59.992/2.3619 64.000/2.5197 1.984/0.0781 .017/.0007 60.007/2.3625 64.013/2.5202 .058/.0023 Overflange length remains constant for standard and undersizes.

27.86/1.097

F780

7313 U/L

21.62/0.851

F780

9097 IH

27.86/1.097

F780

9098 U/L

Main - .002" oversize OD version of 5M7313P. 50.992/2.0076 64.051/2.5217 2.134/0.0840 .018/.0007 1,2,4,5 60.007/2.3625 64.063/2.5222 (@ 0.25mm u/s) .058/.0023 3 (Fl) 59.992/2.3619 64.051/2.5217 2.134/0.0840 .017/.0007 60.007/2.3625 64.063/2.5222 (@ 0.25mm u/s) .058/.0023 Overflange length remains constant for standard and undersizes.

141

4565 IH

1.984/0.0781 .018/.0007 .058/.0023

3 (Fl)

F780

7312 IH

4B4565P Std. .25 .50 .75 1.0

4B4565PO/S2 .25 .50 .75 1.0

5M7313P Std. .25 .50 .75

5M7313PO/S2 .25 .50 .75

DODGE Engine Set No. Sizes Available

Type and Location

Standard Shaft Size

Housing Bore

Max. Bearing Thickness

Vertical Oil Clearance

ENGINE

VIN CYL

Bore x Stroke

153 2507cc (2.5) AMC Eng.

3.88 x 3.19

Max. Overall Length

Material Code

Qty. Set

Bearing Shell No.

TORQUE SETTINGS Connecting Rod 33 ft.lbs/45 Nm Main Bearing 80 ft.lbs/108 Nm

Rod

4B960P Std. 01 10 20 30 40 50

5M1948P

Main 1,3,4,5

Std. 10 20 30

53.208/2.0948 53.226/2.0955

56.083/2.2080 56.096/2.2085

1.425/0.0561 .017/.0006 .074/.0029

21.26/0.837

F780

1480 IH

63.470/2.4988 63.487/2.4995

68.351/2.6910 68.377/2.6920

2.421/0.0953 .022/.0008 .091/.0036

25.04/0.986

F780

8874 U

25.04/0.986

F780

32.26/1.270

F780

32.26/1.270

F780

8872 L 8875 U 8873 L

1,3,4,5

63.470/2.4988 68.351/2.6910 2.421/0.0953 63.487/2.4995 68.377/2.6920 2 (Fl) 63.470/2.4988 68.351/2.6910 2.421/0.0953 63.487/2.4995 68.377/2.6920 2 (Fl) 63.470/2.4988 68.351/2.6910 2.421/0.0953 63.487/2.4995 68.377/2.6920 Overflange length remains constant for standards and undersizes.

4C549S

Cam 1

Std. 2 3 4

.022/.0009 .091/.0036 .022/.0009 .091/.0036 .022/.0009 .091/.0036

51.549/2.0295 51.575/2.0305

54.750/2.1555 54.775/2.1565

1.580/0.0620

17.65/0.695

F23

N-7-1

51.295/2.0195 51.321/2.0205 51.041/2.0095 51.067/2.0105

54.496/2.1455 54.521/2.1465 54.242/2.1355 54.267/2.1365

1.580/0.0620

17.65/0.695

F23

N-7-2

1.580/0.0620

17.65/0.695

F23

N-7-3

50.787/1.9995 50.813/2.0005

53.988/2.1255 54.013/2.1265

1.580/0.0620

17.65/0.695

F23

N-7-4

ENGINE

VIN CYL

Bore x Stroke

152 2497cc (2.5) Mits 6G73 152 2497cc (2.5) Mits 6G73 152 2497cc (2.5) Mits 6G73 (EEB) 152 2497cc (2.5) Mits 6G73 (EEB)

H N H N

83.5mm x 76mm 83.5mm x 76mm 83.5mm x 76mm 83.5mm x 76mm

V6 V6 V6 V6

TORQUE SETTINGS Connecting Rod 38 ft.lbs/52 Nm Main Bearings 60 ft.lbs/81 Nm

Rod

6B1140 Std. .25 .50 .75 1.0

4M1149

Main 1-4

Std. .25 .50 .75 1.0

2T1149 Std.

49.972/1.9674 50.000/1.9685

53.000/2.0866 53.020/2.0874

1.493/0.0588 .015/.0006 .089/.0035

15.50/0.610

F810

1140A IH

59.980/2.3614 60.000/2.3622

64.000/2.5197 64.020/2.5205

1.988/0.0783 .020/.0008 .086/.0034

18.13/0.714

F810

1149A U/L

1.98/0.078

F817

1149T U/L

Thrust 3

66.000/2.5984 77.450/3.0492 66.250/2.6083 77.700/3.0590 Note: Set includes 4 pieces, use on No. 3 position. Required with 4M1149 main set.

142

DODGE Type and Location

Standard Shaft Size

Max. Bearing Thickness

Housing Bore

Vertical Oil Clearance

Max. Overall Length

ENGINE

VIN CYL

Bore x Stroke

2555cc (2.6) Mits G54B (SOHC) 156 2555cc (2.6) Mits G54B (SOHC) 156 2555cc (2.6) Mits G54B (SOHC) 156 2555cc (2.6) Mits G54B (SOHC) 156 2555cc (2.6) Mits G54B (SOHC) 156 2555cc (2.6) Mits G54B (SOHC) 156 2555cc (2.6) Mits G54B (SOHC) Turbo 156 2555cc (2.6) Mits G54B (SOHC) Turbo 156 2555cc (2.6) Mits G54B (SOHC)

91.1mm x 98mm

Material Code

Qty. Set

Bearing Shell No.

Engine Set No. Sizes Available

TORQUE SETTINGS

Connecting Rod 32-35 ft.lbs/44-47 Nm Main Bearing 55-61 ft.lbs/74-83 Nm

Rod 52.973/2.0855 53.000/2.0866

56.007/2.2050 56.021/2.2055

1.493/0.0588 .021/.0008 .076/.0030

25.13/0.989

Main - for engines 8/78 on with 60mm/2.3622" main journal diameter only. 1,2,4,5 59.973/2.3611 64.000/2.5197 1.990/0.0783 .020/.0008 25.13/0.989 60.000/2.3622 64.020/2.5205 .081/.0032 1,2,4,5 59.973/2.3611 64.000/2.5197 1.990/0.0783 .020/.0008 25.13/0.989 60.000/2.3622 64.020/2.5205 .081/.0032 3 (Fl) 59.973/2.3611 64.000/2.5197 1.990/0.0783 .020/.0008 30.95/1.219 60.000/2.3622 64.020/2.5205 .081/.0032 Overflange length remains constant for standard and undersizes.

F820

1136AL IH 1134AL U 1139AL L 1135AL IH

59.973/2.3611 60.000/2.3622 59.973/2.3611 60.000/2.3622

64.000/2.5197 64.020/2.5205 64.000/2.5197 64.020/2.5205

1.990/0.0783 .020/.0008 .081/.0032 1.990/0.0783 .020/.0008 .081/.0032

25.13/0.989

F820

(See Table)

F820

4B1136 Std. .25 .50 .75 1.0

5M1139 Std. .25 .50 .75 1.0

5M1143 .25 .50 .75 1.0

1139AL L 1143AL IH

* DIMENSIONAL INFORMATION FOR 5M1143 Overall Width (Nominal) Increase in Width 0.25 mm u/s shaft 1.223"/31.05mm +0.004"/0.10mm 0.50 mm u/s shaft 1.226"/31.13mm +0.007"/0.18mm 0.75 mm u/s shaft 1.229"/31.21mm +0.010"/0.25mm 1.00 mm u/s shaft 1.232"/31.29mm +0.013"/0.34mm Balance Shaft - repair bushing. Single piece +.173" OD. Line bore housing to 1.985"-1.986". 43.009/1.6933 50.419/1.9850 3.680/0.1450 .025/.0010 20.24/0.797 F23 43.025/1.6939 50.444/1.9860 .089/.0035

Balance Shaft - with grooved #2 & #3 position bearings. 43.009/1.6933 46.030/1.8122 1.478/0.0582 2,3 43.025/1.6939 46.050/1.8130

20.24/0.797

F818

8288

18.00/0.709

F818

8289

20.24/0.797

F818

8369

18.00/0.709

F818

8289

22.959/0.9039 22.980/0.9047

26.000/1.0236 26.021/1.0244

8288 OOD

1BS8288 Std.

3BS8288 Std. .25

1.505/0.0593

Balance Shaft - without grooved #2 & #3 position bearings. 43.009/1.6933 46.030/1.8122 1.478/0.0582 2,3 43.025/1.6939 46.050/1.8130 1 22.959/0.9039 26.000/1.0236 1.505/0.0593 22.980/0.9047 26.021/1.0244

3BS8369 Std. .25

143

DODGE Engine Set No. Sizes Available

Type and Location

Standard Shaft Size

Housing Bore

Max. Bearing Thickness

Vertical Oil Clearance

Max. Overall Length

Material Code

Qty. Set

Bearing Shell No.

16 (Contâ&#x20AC;&#x2122;d.)

5SC761 Std.

33.924/1.3356 33.950/1.3366

38.014/1.4966 38.038/1.4976

2.006/0.0790 .041/.0016 .104/.0041

20.14/0.793

F23

SC761 U

2,3,4,5

33.924/1.3356 33.950/1.3366

38.014/1.4966 38.038/1.4976

2.006/0.0790 .041/.0016 .104/.0041

20.14/0.793

F23

SC760 L

ENGINE

VIN CYL

Bore x Stroke

167 2700cc (2.7) 167 2700cc (2.7) 167 2700cc (2.7) 167 2700cc (2.7) (EER)

R T U R

86.002 x 78.511 86.002 x 78.511 86.002 x 78.511 86.002 x 78.511

6B7170A Std. .25 .50 .75 1.0

6B7170AO/S2 .25 .50 .75 1.0

6B7170P Std. .25 .50 .75 1.0

6B7170PO/S2 .25 .50 .75 1.0

4M7172P

SC762 U/L

V6 V6 V6 V6

TORQUE SETTINGS Connecting Rod 45 ft.lbs + 90 deg Main Bearing 15 ft.lbs + 90 deg Inner Main Bearing 20 ft.lbs 90 deg Outer

Rod - High Strength Aluminum Silicon material. 53.492/2.1060 56.493/2.2241 1.487/0.0585 .009/.0004 53.510/2.1067 56.507/2.2247 .067/.0026

17.38/0.684

F810

7170A IH

Rod - .002" oversize OD version of 6B7170A. 53.492/2.1060 56.543/2.2261 1.637/0.0644 .009/.0004 53.510/2.1067 56.557/2.2266 (@ 0.25mm u/s) .067/.0026

17.38/0.684

F810

9101A IH

Rod - to be superceded by 6B7170A when stock exhausted. 53.492/2.1060 56.493/2.2241 1.487/0.0585 .009/.0004 53.510/2.1067 56.507/2.2247 .067/.0026

17.38/0.684

F780

7170 IH

Rod - .002" oversize OD version of 6B7170P (to be superceded by 6B7170AO/S2 when stock exhausted) 53.492/2.1060 56.543/2.2261 1.637/0.0644 .009/.0004 17.38/0.684 F780 12 53.510/2.1067 56.557/2.2266 (@ 0.25mm u/s) .067/.0026 Main 1-4

Std. .25 .50 .75 1.0

63.492/2.4997 63.510/2.5004

68.993/2.7163 69.010/2.7169

71.100/2.7992 71.350/2.8090 (ID)

90.190/3.5508 90.440/3.5606 (OD)

2.740/0.1079 .003/.0001 .064/.0025

9101 IH

18.70/0.736

F780

7172 U/L

2.06/0.081

F817

7172T U

Thrust

1T7172 Std. +.25

ENGINE

VIN CYL

170 (2.8) 170 (2.8) 170 (2.8) 198 (3.2) 198 (3.2) 225 3687cc (3.7) Forged Crankshaft 225 3687cc (3.7) Forged Crankshaft 225 3687cc (3.7) Forged Crankshaft 225 3687cc (3.7) Forged Crankshaft 225 3687cc (3.7) Forged Crankshaft

Bore x Stroke

L6 L6 L6 L6 L6

3.40 x 3.13 3.40 x 3.13 3.40 x 3.13 3.40 x 3.64 3.40 x 3.64

3.40 x 4.13

6 A A B

TORQUE SETTINGS Connecting Rod 45 ft.lbs/61 Nm Main Bearing 85 ft.lbs/115 Nm

Rod

6B606AL

55.537/2.1865 55.563/2.1875

58.737/2.3125 58.750/2.3130

1.578/0.0621 .018/.0007 .073/.0029

25.14/0.990

F820

4601AL IH

69.837/2.7495 69.863/2.7505

74.740/2.9425 74.752/2.9430

2.428/0.0956 .021/.0008 .075/.0030

26.39/1.039

F820

4602AL U/L

69.837/2.7495 74.740/2.9425 2.432/0.0957 .016/.0006 69.863/2.7505 74.752/2.9430 .067/.0026 Overflange length remains constant for standard and undersizes.

31.88/1.255

F820

4605AL U/L

Std. 10 20 30 40

4M517AL

Main 1,2,4

Std. 10 20 30 40 3 (Fl)

144

DODGE Type and Location

Standard Shaft Size

Max. Bearing Thickness

Housing Bore

Vertical Oil Clearance

Max. Overall Length

Material Code

Qty. Set

Bearing Shell No.

Engine Set No. Sizes Available

(Contâ&#x20AC;&#x2122;d.) Cam 1

50.750/1.9980 50.775/1.9990

54.090/2.1295 54.115/2.1305

1.638/0.0645

23.49/0.925

F23

PD-18-1

50.343/1.9820 50.368/1.9830

53.683/2.1135 53.708/2.1145

1.638/0.0645

19.18/0.755

F23

PD-12-2

49.962/1.9670 49.987/1.9680 49.555/1.9510 49.581/1.9520

53.302/2.0985 53.327/2.0995 52.895/2.0825 52.921/2.0835

1.638/0.0645

19.18/0.755

F23

PD-13-3

1.638/0.0645

19.18/0.755

F23

PD-13-4

30.48/1.200

F100

2134Y

4C874S Std.

Small End - semi finished - single pieces. 25.009/0.9846 26.378/1.0385 (Finish ID Bore Size) (Nominal)

RB2134Y Semi

ENGINE

VIN CYL

Bore x Stroke

TORQUE SETTINGS

181 2972cc (3.0) Mits 6G72 SOHC 181 2972cc (3.0) Mits 6G72 DOHC 181 2972cc (3.0) Mits 6G72 DOHC Turbo 181 2972cc (3.0) Mits 6G72 DOHC 181 2972cc (3.0) Mits 6G72 SOHC 181 2972cc (3.0) Mits 6G72 DOHC 181 2972cc (3.0) Mits 6G72 DOHC Turbo 181 2972cc (3.0) Mits 6G72 DOHC 181 2972cc (3.0) Mits 6G72 SOHC 181 2972cc (3.0) Mits 6G72 SOHC

3 B

V6 V6

91.2mm x 76mm 91.2mm x 76mm

C H H J

V6 V6 V6 V6

91.2mm x 76mm 91.2mm x 76mm 91.2mm x 76mm 91.2mm x 76mm

K S S U

V6 V6 V6 V6

91.2mm x 76mm 91.2mm x 76mm 91.2mm x 76mm 91.2mm x 76mm

Connecting Rod 38 ft.lbs/52 Nm Main Bearing 60 ft.lbs/81 Nm

Rod

Main 1-4

49.972/1.9674 50.000/1.9685

53.000/2.0866 53.020/2.0874

1.493/0.0588 .015/.0006 .089/.0035

15.50/0.610

59.980/2.3614 60.000/2.3622

64.000/2.5197 64.020/2.5205

1.988/0.0783 .020/.0008 .086/.0034

18.13/0.714

Thrust 3

66.000/2.5984 77.450/3.0492 1.98/0.078 66.250/2.6083 77.700/3.0590 Note: Thrust set includes 4 pieces, use on No. 3 position. Required with 4M1149 main set.

ENGINE

VIN CYL

Bore x Stroke

197 3200cc (3.2) SOHC (EGW) 215 3497cc (3.5) SOHC (Aluminum Block) 215 3497cc (3.5) SOHC (Aluminum Block) 215 3497cc (3.5) SOHC (Aluminum Block)

92mm x 81mm

96.01mm x 81mm

63.988/2.5192 64.013/2.5202

68.989/2.7161 69.009/2.7169

2.485/0.0978 .018/.0007 .056/.0022

F810

F817

6B1140

1140A IH

Std. .25 .50 .75 1.0

1149A U/L

Std. .25 .50 .75 1.0

1149T U/L

4M1149

2T1149 Std.

TORQUE SETTINGS

Connecting Rod 40 ft.lbs + 90 deg Main Bearing 15 ft.lbs + 90 deg Inner (3.2L engines) Main Bearing 20 ft.lbs + 90 deg Outer (3.2L engines) Main Bearing 15 ft.lbs + 90 deg 3.5L engines Main Bearing 20 ft.lbs + 90 deg 3.5L engines (Tray) Main Bearing 21 ft.lbs 3.5L engines (Side Bolts)

Rod - High Strength Aluminum Silicon material (supercedes 6B1410P). 57.988/2.2830 60.993/2.4013 1.483/0.0584 .013/.0005 16.54/0.651 58.014/2.2840 61.006/2.4018 .068/.0027 Main 1-4

F810

17.58/0.692

F810

F780

6B1410A

1470A IH

Std. .25 .50 .75 1.0

7182 U/L

Std. .25 .50 .75 1.0

7172T U

Std. +.25

4M7182P

Thrust 2.06/0.081 71.100/2.7992 90.190/3.5508 71.350/2.8090 90.440/3.5606 (OD) (ID) Note: Thrust set includes 2 pieces, use on No. 2 position. Required with 4M7182P main set.

145

F817

1T7172

DODGE Engine Set No. Sizes Available

Type and Location

Standard Shaft Size

Housing Bore

Max. Bearing Thickness

Vertical Oil Clearance

ENGINE

VIN CYL

Bore x Stroke

201 (3.3) OHV 201 (3.3) OHV 201 (3.3) OHV 201 (3.3) OHV 201 (3.3) OHV 201 (3.3) OHV 201 (3.3) OHV 201 (3.3) OHV (EGM) 230 (3.8) OHV

3 G J R S T U G L

93mm x 81mm 93mm x 81mm 93mm x 81mm 93mm x 81mm 93mm x 81mm 93mm x 81mm 93mm x 81mm 93mm x 81mm 96mm x 87mm

6B1410A Std. .25 .50 .75 1.0

4M1958P .25 .50 .75 1.0

V6 V6 V6 V6 V6 V6 V6 V6 V6

Max. Overall Length

Material Code

Qty. Set

Bearing Shell No.

TORQUE SETTINGS Connecting Rod 40 ft.lbs/54 Nm + 1/4 turn Main Bearing 30 ft.lbs/41 Nm + 1/4 turn

Rod - High Strength Aluminum Silicon material (supercedes 6B1410P). 57.988/2.2830 60.993/2.4013 1.483/0.0584 .013/.0005 16.54/0.651 58.014/2.2840 61.006/2.4018 .068/.0027

F810

1470A IH

Main - Alt set to 4M1946P with +0.010" overflange length increase. * See below for dimensional information. 1,3,4 63.988/2.5192 67.993/2.6769 1.983/0.0781 .013/.0005 24.49/0.964 F780 6 1948 64.013/2.5202 68.014/2.6777 .051/.0020 U/L 2 (Fl)

63.988/2.5192 67.993/2.6769 64.013/2.5202 68.014/2.6777 to be disontinued when stock exhausted.

1.983/0.0781 .013/.0005 .051/.0020

24.13/0.950

F780

1958 U/L

4M7278A

Main 1,2,4

1.983/0.0781 .013/.0005 .051/.0020

24.49/0.964

F810

1948A U/L

63.988/2.5192 67.993/2.6769 1.983/0.0781 .013/.0005 64.013/2.5202 68.014/2.6777 .051/.0020 Overflange length remains constant for standard and undersizes.

23.88/0.940

F810

7278A U/L

Cam - supercedes 4C1405S. Set has OD groove on #2 & #3 position bearings. 50.724/1.9970 54.089/2.1295 1.643/0.0647 23.75/0.935 1 50.775/1.9990 54.115/2.1305

F23

PD-28-1

Std. .25 .50 .75

63.988/2.5192 64.013/2.5202

67.993/2.6769 68.014/2.6777

2 (Fl)

4C1405BS Std.

3 4

50.292/1.9800 50.343/1.9820 49.911/1.9650 49.962/1.9670 49.530/1.9500 49.581/1.9520

53.683/2.1135 53.708/2.1145 53.302/2.0985 53.327/2.0995 52.896/2.0825 52.921/2.0835

1.659/0.0653

15.62/0.615

F23

PD-28-2B

1.659/0.0653

15.62/0.615

F23

PD-28-3B

1.643/0.0647

15.62/0.615

F23

PD-28-4

ENGINE

VIN CYL

Bore x Stroke

215 3497cc (3.5) SOHC (Cast Iron Block)

96mm x 81mm

6B1410A Std. .25 .50 .75 1.0

4M2010P

TORQUE SETTINGS Connecting Rod 40 ft.lbs/54 Nm + 1/4 turn Main Bearing 30 ft.lbs/41 Nm + 1/4 turn

Rod - High Strength Aluminum Silicon material (supercedes 6B1410P). 57.988/2.2830 60.993/2.4013 1.483/0.0584 .013/.0005 16.54/0.651 58.014/2.2840 61.006/2.4018 .068/.0027 Main 1,3,4

67.993/2.6769 68.014/2.6777

1470A IH

1.983/0.0781 .013/.0005 .051/.0020

24.49/0.964

F780

MB3340P U/L

63.988/2.5192 67.993/2.6769 1.983/0.0781 .013/.0005 64.013/2.5202 68.014/2.6777 .051/.0020 Overflange length remains constant for standard and undersizes.

28.70/1.130

F780

MB3471P U/L

Std. .25 .50 .75

63.988/2.5192 64.013/2.5202

F810

2 (Fl)

146

DODGE Type and Location

Standard Shaft Size

Max. Bearing Thickness

Housing Bore

Vertical Oil Clearance

ENGINE

VIN CYL

Bore x Stroke

B C D E F H N

3.40 x 4.13 3.40 x 4.13 3.40 x 4.13 3.40 x 4.13 3.40 x 4.13 3.40 x 4.13 3.40 x 4.13

L6 L6 L6 L6 L6 L6 L6

Max. Overall Length

Material Code

Qty. Set

Bearing Shell No.

Engine Set No. Sizes Available

TORQUE SETTINGS

Connecting Rod 45 ft.lbs/61 Nm Main Bearing 85 ft.lbs/115 Nm

Rod 55.537/2.1865 55.563/2.1875

58.738/2.3125 58.750/2.3130

1.584/0.0624 .018/.0007 .071/.0028

Main 1,2,4

69.837/2.7495 74.740/2.9425 2.435/0.0959 69.863/2.7505 74.752/2.9430 3 (Fl) 69.837/2.7495 74.740/2.9425 2.435/0.0959 69.863/2.7505 74.752/2.9430 Overflange length remains constant for standards and undersizes.

.013/.0005 .066/.0026 .013/.0005 .066/.0026

18.29/0.720

22.44/0.883 28.14/1.108

F780

F780 F780

6 2

1214 IH 2724 U/L 2725 U/L

Main - Alt set to 4M1419AL with +0.010" overflange length increase. * See below for dimensional information. 69.837/2.7495 74.740/2.9425 2.435/0.0959 .013/.0005 28.39/1.118 F780 2 2723 3 (Fl) 69.863/2.7505 74.752/2.9430 .066/.0026 U/L 1,2,4 69.837/2.7495 74.740/2.9425 2.435/0.0959 .013/.0005 22.44/0.883 F780 6 2724 69.863/2.7505 74.752/2.9430 .066/.0026 U/L to be disontinued when stock exhausted.

6B1214AL Std. 10 20 30 40

4M1419AL Std. 10 20 30 40

4M2723P 40

* DIMENSIONAL INFORMATION FOR 4M2723P Overall Width (Nominal) Increase in Width .040" u/s shaft 1.118" +0.010" Cam - engines from 1979-1987. 1 50.750/1.9980 54.090/2.1295 50.775/1.9990 54.115/2.1305 2 50.343/1.9820 53.683/2.1135 50.368/1.9830 53.708/2.1145 3 49.962/1.9670 53.302/2.0985 49.987/1.9680 53.327/2.0995 4 49.555/1.9510 52.895/2.0825 49.581/1.9520 52.921/2.0835 Cam - engines from 1976-1978. 50.750/1.9980 54.090/2.1295 1 50.775/1.9990 54.115/2.1305 2 50.343/1.9820 53.683/2.1135 50.368/1.9830 53.708/2.1145 3 49.962/1.9670 53.302/2.0985 49.987/1.9680 53.327/2.0995 4 49.555/1.9510 52.895/2.0825 49.581/1.9520 52.921/2.0835

1.625/0.0640

19.94/0.785

F23

PD-21-1

1.625/0.0640

16.00/0.630

F23

PD-21-2

1.625/0.0640

16.00/0.630

F23

PD-21-3

1.638/0.0645

19.18/0.755

F23

PD-13-4

1.638/0.0645

23.49/0.925

F23

PD-18-1

1.638/0.0645

19.18/0.755

F23

PD-12-2

1.638/0.0645

19.18/0.755

F23

PD-13-3

1.638/0.0645

19.18/0.755

F23

PD-13-4

30.48/1.200

F100

2134Y

4C1115S Std.

4C874S Std.

Small End - semi finished - single pieces. 25.009/0.9846 26.378/1.0385 (Finish ID Bore Size) (Nominal)

RB2134Y Semi

ENGINE

VIN CYL

Bore x Stroke

225 (3.7) 226 (3.7)

K K

93mm x 90.8mm 93mm x 90.8mm

V6 V6

TORQUE SETTINGS Connecting Rod 20 ft.lbs + 90 deg

Rod - High Strength Aluminum Silicon material. 57.897/2.2794 61.194/2.4092 1.641/0.0646 .008/.0003 57.904/2.2797 61.206/2.4097 .043/.0017

16.64/0.655

Rod - .002" oversize OD version of 6B7200A. 57.897/2.2794 61.244/2.4112 1.791/0.0705 .008/.0003 57.904/2.2797 61.256/2.4116 (@ 0.25mm u/size) .043/.0017

16.64/0.655

Main - High Strength Aluminum Silicon material. 1-4 63.495/2.4998 68.395/2.6927 2.443/0.0962 .004/.0002 63.505/2.5002 68.405/2.6931 .040/.0016

20.63/0.812

147

F810

7200A IH 9106A IH 7214A U/L

6B7200A Std. .25 .50

6B7200AO/S2 .25 .50 .75 1.0

4M7214A Std. .25 .50 .75 1.0

DODGE Engine Set No. Sizes Available

Type and Location

Standard Shaft Size

Housing Bore

71.000/2.7953 71.250/2.8051

91.000/3.5827 91.250/3.5925

Max. Bearing Thickness

Vertical Oil Clearance

Max. Overall Length

Material Code

Qty. Set

Bearing Shell No.

2.54/0.100

F817

7214T

2.54/0.100

F817

7215T

24 (Contâ&#x20AC;&#x2122;d.) 1T7214

Thrust 3

Std. 3

71.000/2.7953 91.000/3.5827 71.250/2.8051 91.250/3.5925 Set includes 2 pieces, use on No.3 position. Required with 4M7214A main set.

ENGINE

VIN CYL

Bore x Stroke

239 (3.9) OHV 239 (3.9) OHV

M X

3.906 x 3.313 3.906 x 3.313

V6 V6

TORQUE SETTINGS Connecting Rod 45 ft.lbs/61 Nm Main Bearing 85 ft.lbs/115 Nm

Rod

6B1387P

53.950/2.1240 53.975/2.1250

57.150/2.2500 57.168/2.2507

1.584/0.0624 .013/.0005 .056/.0022

18.67/0.735

F780

1387 IH

63.487/2.4995 63.513/2.5005

68.390/2.6925 68.402/2.6930

2.436/0.0959 .005/.0002 .069/.0027

22.27/0.877

F780

4352 IH

63.487/2.4995 63.513/2.5005

68.390/2.6925 68.402/2.6930

2.436/0.0959 .025/.0010 .089/.0035

29.26/1.152

F780

2703 IH

63.487/2.4995 68.390/2.6925 2.436/0.0959 .005/.0002 63.513/2.5005 68.402/2.6930 .069/.0027 Overflange length remains constant for standard and undersizes.

33.70/1.327

F780

4354 U/L

Std. 10 20 30 40

4M1701P

Main 1,2

Std. 10 20 30 3 (Fl) 4

4C1114S

Cam 1

50.749/1.9980 50.775/1.9990

54.077/2.1290 54.127/2.1310

1.638/0.0645

22.35/0.880

F23

PD-16-1

49.962/1.9670 49.987/1.9680

53.670/2.1130 53.721/2.1150

1.638/0.0645

16.00/0.630

F23

PD-25-2

49.555/1.9510 49.581/1.9520

53.289/2.0980 53.340/2.1000

1.638/0.0645

15.75/0.620

F23

PD-25-3

39.637/1.5605 39.662/1.5615

42.964/1.6915 43.014/1.6935

1.638/0.0645

24.00/0.945

F23

PD-9-5

Std.

ENGINE

VIN CYL

Bore x Stroke

285 (4.7) 285 (4.7) 287 (4.7)

J N N

93mm x 86.36mm 93mm x 86.36mm 93mm x 86.36mm

V8 V8 V8

TORQUE SETTINGS Connecting Rod 20 ft.lbs + 90 deg Main Bearing 25 in.lbs + 90 deg Inner Main Bearing 40 ft.lbs Outer

Rod - for engines 2004 on without locating tang. 50.996/2.0077 53.992/2.1257 1.491/0.0587 .013/.0005 51.003/2.0080 54.005/2.1262 .043/.0017

16.64/0.655

F810

7206A IH

Rod - .002" oversize OD version of 8B7206A. 50.996/2.0077 53.992/2.1257 1.641/0.0646 .013/.0005 51.003/2.0080 54.005/2.1262 (@ 0.25mm u/size) .043/.0017

16.64/0.655

F810

9116A IH

Rod - for engines 1999-2004 with locating tang. 50.996/2.0077 53.992/2.1257 1.491/0.0587 .013/.0005 51.003/2.0080 54.005/2.1262 .043/.0017

16.64/0.655

F810

7210A IH

Rod - .002" oversize OD version of 8B7210A. 50.996/2.0077 54.042/2.1276 1.641/0.0646 .013/.0005 51.003/2.0080 54.055/2.1281 (@ 0.25mm u/size) .043/.0017

16.64/0.655

F810

9092A IH

Main - High Strength Aluminum Silicon material. 1-5 63.495/2.4998 68.395/2.6927 2.443/0.0962 .004/.0002 Std. .25 .50 .75 1.0 63.505/2.5002 68.405/2.6931 .040/.0016

20.63/0.812

F810

7214A U/L

2.54/0.100

F817

7214T

2.54/0.100

F817

7215T

8B7206A Std. .25 .50 .75

8B7206AO/S2 .25 .50 .75

8B7210A Std. .25 .50 .75 1.0

8B7210AO/S2 .25 .50 .75 1.0

5M7214A

1T7214 Std.

Thrust 3

71.000/2.7953 91.000/3.5827 71.250/2.8051 91.250/3.5925 3 71.000/2.7953 91.000/3.5827 71.250/2.8051 91.250/3.5925 Set includes 2 pieces, use on No.3 position. Required with 5M7214A main set.

148

DODGE Type and Location

Standard Shaft Size

ENGINE 273 (4.5) 273 (4.5) 318 (5.2) 318 (5.2) 318 (5.2) 318 (5.2) 318 (5.2) 326 (5.3)

Max. Bearing Thickness

Housing Bore

VIN CYL D 8 E F G

V8 V8 V8 V8 V8 V8 V8 V8

Vertical Oil Clearance

Bore x Stroke

Max. Overall Length

Material Code

Qty. Set

Bearing Shell No.

Engine Set No. Sizes Available

TORQUE SETTINGS

Connecting Rod 45-50 ft.lbs/61-68 Nm Main Bearing 80-85 ft.lbs/108-115 Nm

3.63 x 3.31 3.63 x 3.31 3.91 x 3.31 3.91 x 3.31 3.91 x 3.31 3.91 x 3.31 3.91 x 3.31 3.95 x 3.31

Rod 53.950/2.1240 53.975/2.1250

57.150/2.2500 57.163/2.2505

1.585/0.0624 .005/.0002 .069/.0027

Rod - .002" oversize OD version of 8B481P. 53.950/2.1240 57.201/2.2520 1.737/0.0684 .006/.0002 53.975/2.1250 57.214/2.2525 (@ .010" u/s) .070/.0028

21.52/0.847

F780

2700 IH 9090 IH

Main - Alt set to 5M540P with +0.010" overflange length increase. * See below for dimensional information. 1,2,4 63.487/2.4995 68.390/2.6925 2.436/0.0959 .005/.0002 22.27/0.877 F780 6 4352 63.513/2.5005 68.402/2.6930 .069/.0027 U/L 3 (Fl)

63.487/2.4995 63.513/2.5005

68.390/2.6925 68.402/2.6930

2.436/0.0959 .005/.0002 .069/.0027

29.51/1.162

F780

4355 U/L

63.487/2.4995 68.390/2.6925 63.513/2.5005 68.402/2.6930 to be disontinued when stock exhausted.

2.436/0.0959 .005/.0002 .069/.0027

33.70/1.327

F780

4354 U/L

8B481P Std. 01 10 20 30 40

8B481PO/S2 10 20 30 40

5M2036P 20 30

* DIMENSIONAL INFORMATION FOR 5M2036P Overall Width (Nominal) Increase in Width .020" u/s shaft 1.162" +0.010" .030" u/s shaft 1.162" +0.010" Main - flange O.D. 3.375" 1,2,4 63.487/2.4995 68.390/2.6925 2.436/0.0959 63.513/2.5005 68.402/2.6930 3 (Fl) 63.487/2.4995 68.390/2.6925 2.436/0.0959 63.513/2.5005 68.402/2.6930 5 63.487/2.4995 68.390/2.6925 2.436/0.0959 63.513/2.5005 68.402/2.6930 Overflange length remains constant for standard and undersizes. Cam 1

.005/.0002 .069/.0027 .005/.0002 .069/.0027 .005/.0002 .069/.0027

22.27/0.877

F780

4352 U/L 4353 U/L 4354 U/L

29.26/1.152

F780

33.70/1.327

F780

1.638/0.0645

22.35/0.880

F23

PD-16-1

1.638/0.0645

19.43/0.765

F23

PD-9-2

1.638/0.0645

19.43/0.765

F23

PD-9-3

50.750/1.9980 50.775/1.9990 50.343/1.9820 50.368/1.9830 49.962/1.9670 49.987/1.9680

54.090/2.1295 54.115/2.1305 53.683/2.1135 53.708/2.1145 53.302/2.0985 53.327/2.0995

49.555/1.9510 49.581/1.9520

52.895/2.0825 52.921/2.0835

1.638/0.0645

19.43/0.765

F23

PD-9-4

39.637/1.5605 39.662/1.5615

42.977/1.6920 43.002/1.6930

1.638/0.0645

24.00/0.945

F23

PD-9-5

30.48/1.200

F100

2134Y

2 3

5M540P Std. 10 20 30 40

5C875S Std.

Small End - semi finished - single pieces. 25.009/0.9846 26.378/1.0385 (Nominal) (Finish ID Bore Size)

RB2134Y Semi

149

DODGE Engine Set No. Sizes Available

Type and Location

Standard Shaft Size

Housing Bore

Max. Bearing Thickness

Vertical Oil Clearance

ENGINE

VIN CYL

Bore x Stroke

318 (5.2) 318 (5.2) 318 (5.2) 318 (5.2) 318 (5.2) 318 (5.2) 318 (5.2) 318 (5.2) 318 (5.2) 318 (5.2) 318 (5.2) 318 (5.2) 318 (5.2) 318 (5.2) 318 (5.2) 318 (5.2)

4 E G H K L M N P R S T T U Y Z

3.91 x 3.31 3.91 x 3.31 3.91 x 3.31 3.91 x 3.31 3.91 x 3.31 3.91 x 3.31 3.91 x 3.31 3.91 x 3.31 3.91 x 3.31 3.91 x 3.31 3.91 x 3.31 3.91 x 3.31 3.91 x 3.31 3.91 x 3.31 3.91 x 3.31 3.91 x 3.31

V8 V8 V8 V8 V8 V8 V8 V8 V8 V8 V8 V8 V8 V8 V8 V8

Max. Overall Length

Material Code

Qty. Set

Bearing Shell No.

TORQUE SETTINGS Connecting Rod 45-50 ft.lbs/61-68 Nm Main Bearing 85-90 ft.lbs/115-122 Nm

Rod

8B481P

53.950/2.1240 53.975/2.1250

Std. 01 10 20 30 40

8B481PO/S2 10 20 30 40

57.150/2.2500 57.163/2.2505

1.585/0.0624 .005/.0002 .069/.0027

Rod - .002" oversize OD version of 8B481P. 53.950/2.1240 57.201/2.2520 1.737/0.0684 .006/.0002 53.975/2.1250 57.214/2.2525 (@ .010" u/s) .070/.0028

Main - flange O.D. 3.530" 1,2,4 63.487/2.4995 68.390/2.6925 2.436/0.0959 Std. 01 10 20 30 40 63.513/2.5005 68.402/2.6930 3 (Fl) 63.487/2.4995 68.390/2.6925 2.436/0.0959 63.513/2.5005 68.402/2.6930 3 (Fl) 63.487/2.4995 68.390/2.6925 2.436/0.0959 63.513/2.5005 68.402/2.6930 5 63.487/2.4995 68.390/2.6925 2.436/0.0959 63.513/2.5005 68.402/2.6930 Overflange length remains constant for standard and undersizes.

5M1344P

5C1112S Std.

5C875S Std.

Semi

F780

2700 IH

21.52/0.847

F780

9090 IH

22.27/0.877

F780

29.26/1.152

F780

29.26/1.152

F780

33.70/1.327

F780

4352 U/L 2703 U 4357 L 4354 U/L

Cam - engines from 1980 on. 50.750/1.9980 54.090/2.1295 1 50.775/1.9990 54.115/2.1305 2 50.343/1.9820 53.683/2.1135 50.368/1.9830 53.708/2.1145 3 49.962/1.9670 53.302/2.0985 49.987/1.9680 53.327/2.0995

1.638/0.0645

22.35/0.880

F23

PD-16-1

1.638/0.0645

16.00/0.630

F23

PD-25-2

1.638/0.0645

15.75/0.620

F23

PD-25-3

49.555/1.9510 49.581/1.9520

52.895/2.0825 52.921/2.0835

1.638/0.0645

15.75/0.620

F23

PD-25-4

39.637/1.5605 39.662/1.5615

42.977/1.6920 43.002/1.6930

1.638/0.0645

24.00/0.945

F23

PD-9-5

1.638/0.0645

22.35/0.880

F23

PD-16-1

1.638/0.0645

19.43/0.765

F23

PD-9-2

Cam - engines from 1974-1979. 50.750/1.9980 54.090/2.1295 1 50.775/1.9990 54.115/2.1305 2 50.343/1.9820 53.683/2.1135 50.368/1.9830 53.708/2.1145 3

49.962/1.9670 49.987/1.9680

53.302/2.0985 53.327/2.0995

1.638/0.0645

19.43/0.765

F23

PD-9-3

49.555/1.9510 49.581/1.9520 39.637/1.5605 39.662/1.5615

52.895/2.0825 52.921/2.0835 42.977/1.6920 43.002/1.6930

1.638/0.0645

19.43/0.765

F23

PD-9-4

1.638/0.0645

24.00/0.945

F23

PD-9-5

30.48/1.200

F100

2134Y

RB2134Y

.005/.0002 .069/.0027 .025/.0010 .089/.0035 .025/.0010 .089/.0035 .005/.0002 .069/.0027

21.52/0.847

Small End 25.009/0.9846 26.378/1.0385 (Nominal) (Finish ID Bore Size)

150

DODGE Type and Location

Standard Shaft Size

Max. Bearing Thickness

Housing Bore

Vertical Oil Clearance

ENGINE

VIN CYL

Bore x Stroke

340 (5.6) 340 (5.6) 340 (5.6)

H J P

4.04 x 3.31 4.04 x 3.31 4.04 x 3.31

V8 V8 V8

Max. Overall Length

Material Code

Qty. Set

Bearing Shell No.

Engine Set No. Sizes Available

TORQUE SETTINGS

Connecting Rod 45-50 ft.lbs/61-68 Nm Main Bearing 80-85 ft.lbs/108-115 Nm

Rod 53.950/2.1240 53.975/2.1250

57.150/2.2500 57.163/2.2505

1.585/0.0624 .005/.0002 .069/.0027

21.52/0.847

Rod - .002" oversize OD version of 8B481P. 53.950/2.1240 57.201/2.2520 1.737/0.0684 .006/.0002 53.975/2.1250 57.214/2.2525 (@ .010" u/s) .070/.0028

21.52/0.847

Main - flange O.D. 3.375" 63.487/2.4995 1,2,4 63.512/2.5005

22.27/0.877

68.389/2.6925 68.402/2.6930

2.436/0.0959 .013/.0005 .076/.0030

3 (Fl)

63.487/2.4995 68.389/2.6925 2.436/0.0959 63.512/2.5005 68.402/2.6930 5 63.487/2.4995 68.389/2.6925 2.436/0.0959 63.512/2.5005 68.402/2.6930 Overflange length remains constant for standard and undersizes. Cam 1

.013/.0005 .065/.0026 .013/.0005 .065/.0026

F780

2700 IH 9090 IH MB2283P U/L

29.26/1.152

F780

33.70/1.327

F780

1.638/0.0645

22.35/0.880

F23

PD-16-1

1.638/0.0645

19.43/0.765

F23

PD-9-2

1.638/0.0645

19.43/0.765

F23

PD-9-3

54.090/2.1295 54.115/2.1305 53.683/2.1135 53.708/2.1145 53.302/2.0985 53.327/2.0995

49.555/1.9510 49.581/1.9520

52.895/2.0825 52.921/2.0835

1.638/0.0645

19.43/0.765

F23

PD-9-4

39.637/1.5605 39.662/1.5615

42.977/1.6920 43.002/1.6930

1.638/0.0645

24.00/0.945

F23

PD-9-5

30.48/1.200

F100

2134Y

8B481PO/S2 10 20 30 40

5M963P Std. 10 20 30

MB2036P U/L MB2559P U/L

50.750/1.9980 50.775/1.9990 50.343/1.9820 50.368/1.9830 49.962/1.9670 49.987/1.9680

8B481P Std. 01 10 20 30 40

5C875S Std.

Small End 25.009/0.9846 26.378/1.0385 (Finish ID Bore Size) (Nominal)

RB2134Y Semi

ENGINE

VIN CYL

Bore x Stroke

345 (5.7) Hemi 345 (5.7) Hemi 345 (5.7) Hemi (EZB)

D H 2

99.5mm x 90.9mm 99.5mm x 90.9mm 99.5mm x 90.9mm

V8 V8 V8

TORQUE SETTINGS

Connecting Rod 15 ft.lbs + 90 deg Main Bearing 20 ft.lbs + 90 deg M12 Bolts Main Bearing 21 ft.lbs M8 Crossbolts

Rod 53.993/2.1257 54.008/2.1263

57.206/2.2522 57.219/2.2527

1.590/0.0626 .018/.0007 .062/.0024

Rod - .002" oversize OD version of 8B1808A. 53.993/2.1257 57.257/2.2542 1.740/0.0685 .018/.0007 54.008/2.1263 57.270/2.2547 (@0.25mm u/s) .082/.0032 Main 1-5

64.996/2.5589 65.004/2.5592

69.893/2.7517 69.906/2.7522

2.439/0.0960 .010/.0004 .048/.0019

Thrust 3

72.644/2.8600 93.370/3.6760 2.586/0.1018 (ID) (OD) 73.152/2.8800 Set includes two pieces, use on No. 3 position. Required with 5M2220A main set.

20.10/0.791

21.60/0.850

F810

151

7211A IH 9112A IH 7216A U/L MB3780W U

8B1808A Std. .25 .50

8B1808AO/S2 .25 .50 .75

5M2220A Std. .25 .50

1T611S Std.

DODGE Engine Set No. Sizes Available

Type and Location

Standard Shaft Size

ENGINE

Housing Bore

VIN CYL

350 (5.7) 361 (5.9) 383 (6.4) 383 (6.3) 383 (6.3) 383 (6.3) 383 (6.3) 383 (6.3) 383 (6.3) 400 (6.6) 400 (6.6) 400 (6.6) 400 (6.6)

8 G H J L N J M N P

V8 V8 V8 V8 V8 V8 V8 V8 V8 V8 V8 V8 V8

Max. Bearing Thickness

Vertical Oil Clearance

Bore x Stroke

Max. Overall Length

Material Code

Qty. Set

Bearing Shell No.

TORQUE SETTINGS Connecting Rod 45 ft.lbs/61 Nm Main Bearing 85 ft.lbs/115 Nm

4.06 x 3.38 4.12 x 3.38 4.25 x 3.38 4.25 x 3.38 4.25 x 3.38 4.25 x 3.38 4.25 x 3.38 4.25 x 3.38 4.25 x 3.38 4.34 x 3.38 4.34 x 3.38 4.34 x 3.38 4.34 x 3.38

Rod

8B527P

60.300/2.3740 60.325/2.3750

63.500/2.5000 63.513/2.5005

1.582/0.0623 .011/.0004 .075/.0030

23.67/0.932

F780

2466 IH

Main - Discontinued (use 5M876P). 66.662/2.6245 71.564/2.8175 1,2,4,5 66.688/2.6255 71.557/2.8180

2.428/0.0956 .028/.0011 .091/.0036

24.10/0.949

F780

MB2065P U/L

66.662/2.6245 71.564/2.8175 2.428/0.0956 .028/.0011 31.09/1.224 F780 2 66.688/2.6255 71.557/2.8180 .091/.0036 Note : Some early 1974 400 engines have a smaller flanged bearing diameter of 3.450"/3.500" (use ACL Part No. 5M876P)

MB2630P U/L

Std. 10 20 30 40

5M1348P Std. 10

3 (Fl)

Main - flange O.D. 3.450" for engines from 58-73. 1,2,4,5 66.662/2.6245 71.565/2.8175 2.435/0.0959 Std. 10 20 30 40 66.688/2.6255 71.577/2.8180 3 (Fl) 66.662/2.6245 71.565/2.8175 2.435/0.0959 66.688/2.6255 71.577/2.8180

5M876P

5C876S

Cam 1

Std. 2 3 4 5

.021/.0008 .085/.0033 .019/.0007 .083/.0033

24.10/0.949

F780

31.09/1.224

F780

2467 U/L 2468 U/L

50.750/1.9980 50.775/1.9990

54.090/2.1295 54.115/2.1305

1.638/0.0645

19.18/0.755

F23

PD-17-1

50.343/1.9820 50.368/1.9830 49.962/1.9670 49.987/1.9680 49.555/1.9510 49.581/1.9520

53.683/2.1135 53.708/2.1145 53.302/2.0985 53.327/2.0995 52.895/2.0825 52.921/2.0835

1.638/0.0645

19.18/0.755

F23

PD-12-2

1.638/0.0645

17.12/0.674

F23

PD-12-3

1.638/0.0645

19.18/0.755

F23

PD-12-4

44.400/1.7480 44.425/1.7490

47.740/1.8795 47.765/1.8805

1.638/0.0645

19.18/0.755

F23

PD-12-5

ENGINE

VIN CYL

Bore x Stroke

360 (5.9) 360 (5.9) 360 (5.9) 360 (5.9) 360 (5.9) 360 (5.9) 360 (5.9) 360 (5.9) 360 (5.9) 360 (5.9) 360 (5.9) 360 (5.9) 360 (5.9)

1 5 8 F J K L S T U W Y Z

4.00 x 3.58 4.00 x 3.58 4.00 x 3.58 4.00 x 3.58 4.00 x 3.58 4.00 x 3.58 4.00 x 3.58 4.00 x 3.58 4.00 x 3.58 4.00 x 3.58 4.00 x 3.58 4.00 x 3.58 4.00 x 3.58

V8 V8 V8 V8 V8 V8 V8 V8 V8 V8 V8 V8 V8

TORQUE SETTINGS Connecting Rod 45 ft.lbs/61 Nm Main Bearing 85 ft.lbs/115 Nm

Rod

8B481P Std. 01 10 20 30 40

8B481PO/S2 10 20 30 40

53.950/2.1240 53.975/2.1250

57.150/2.2500 57.163/2.2505

1.585/0.0624 .005/.0002 .069/.0027

Rod - .002" oversize OD version of 8B481P. 53.950/2.1240 57.201/2.2520 1.737/0.0684 .006/.0002 53.975/2.1250 57.214/2.2525 (@ .010" u/s) .070/.0028

152

21.52/0.847

F780

2700 IH

21.52/0.847

F780

9090 IH

DODGE Type and Location

Standard Shaft Size

Housing Bore

Max. Bearing Thickness

Vertical Oil Clearance

Max. Overall Length

Material Code

Qty. Set

Bearing Shell No.

Engine Set No. Sizes Available

(Contâ&#x20AC;&#x2122;d.) Main - flange O.D. 3.680" for 1971-73 engines. 71.361/2.8095 76.264/3.0025 2.431/0.0957 .015/.0006 1,2,4 71.387/2.8105 76.276/3.0030 .079/.0031

22.28/0.877

3 (Fl)

2.431/0.0957 .015/.0006 .079/.0031

29.26/1.152

F780

2708 U/L

71.361/2.8095 76.264/3.0025 2.431/0.0957 .015/.0006 71.387/2.8105 76.276/3.0030 .079/.0031 Overflange length remains constant for standard and oversizes.

31.98/1.259

F780

2709 U/L

Main - flange O.D. 3.910" for engines 1974 on. 71.361/2.8095 76.264/3.0025 2.431/0.0957 .015/.0006 1,2,4 71.387/2.8105 76.276/3.0030 .079/.0031

22.28/0.877

F780

2705 IH

3 (Fl)

2.431/0.0957 .015/.0006 .079/.0031

29.26/1.152

F780

2706 U/L

71.361/2.8095 76.264/3.0025 2.431/0.0957 .015/.0006 71.387/2.8105 76.276/3.0030 .079/.0031 Overflange length remains constant for standards and undersizes.

31.98/1.259

F780

2709 U/L

71.361/2.8095 71.387/2.8105

76.264/3.0025 76.276/3.0030

F780

Main - Alt set to 5M1266P with +0.010" overflange length increase. * See dimensional information below. 1,2,4 71.361/2.8095 76.264/3.0025 2.558/0.1007 .015/.0006 22.28/0.877 F780 6 71.387/2.8105 76.276/3.0030 (@ .010" u/s) .079/.0031 3 (Fl)

71.361/2.8095 76.264/3.0025 71.387/2.8105 76.276/3.0030 5 71.361/2.8095 76.264/3.0025 71.387/2.8105 76.276/3.0030 Stock not available from fee warehouses.

.010" u/s shaft .020" u/s shaft .030" u/s shaft .040" u/s shaft

2.558/0.1007 (@ .010" u/s) 2.558/0.1007 (@ .010" u/s)

.015/.0006 .079/.0031 .015/.0006 .079/.0031

29.52/1.162

F780

31.98/1.259

F780

2707 U/L

2705 IH

22.35/0.880

F23

PD-16-1

1.638/0.0645

16.00/0.630

F23

PD-25-2

1.638/0.0645

15.75/0.620

F23

PD-25-3

1.638/0.0645

15.75/0.620

F23

PD-25-4

1.638/0.0645

24.00/0.945

F23

PD-9-5

Cam - engines from 1971-1979. 50.750/1.9980 54.090/2.1295 1 50.775/1.9990 54.115/2.1305

1.638/0.0645

22.35/0.880

F23

PD-16-1

3 4 5

5M1266P Std. 01 10 20 30

5M2715P 10 20 30 40

* DIMENSIONAL INFORMATION FOR 5M2715P Overall Width (Nominal) Increase in Width 1.162" +0.010" 1.162" +0.010" 1.162" +0.010" 1.162" +0.010"

1.638/0.0645

53.683/2.1135 53.708/2.1145 53.302/2.0985 53.327/2.0995 52.895/2.0825 52.921/2.0835 42.977/1.6920 43.002/1.6930

5M1051P Std. 10 20 30 40

2715 U/L 2709 U/L

Cam - engines from 1980 on. 50.750/1.9980 54.090/2.1295 1 50.775/1.9990 54.115/2.1305 50.343/1.9820 50.368/1.9830 49.962/1.9670 49.987/1.9680 49.555/1.9510 49.581/1.9520 39.637/1.5605 39.662/1.5615

5C1112S Std.

5C875S Std.

50.343/1.9820 50.368/1.9830 49.962/1.9670 49.987/1.9680 49.555/1.9510 49.581/1.9520

53.683/2.1135 53.708/2.1145 53.302/2.0985 53.327/2.0995 52.895/2.0825 52.921/2.0835

1.638/0.0645

19.43/0.765

F23

PD-9-2

1.638/0.0645

19.43/0.765

F23

PD-9-3

1.638/0.0645

19.43/0.765

F23

PD-9-4

39.637/1.5605 39.662/1.5615

42.977/1.6920 43.002/1.6930

1.638/0.0645

24.00/0.945

F23

PD-9-5

153

DODGE Engine Set No. Sizes Available

Type and Location

Standard Shaft Size

ENGINE

Housing Bore

VIN CYL

383 (6.4) 413 (6.8) 426 (7.0) (Excl. Hemi) 440 (7.2) 440 (7.2) 440 (7.2) 440 (7.2) 440 (7.2) 440 (7.2) 440 (7.2) 440 (7.2) 440 (7.2)

A D K L M T U V

V8 V8 V8 V8 V8 V8 V8 V8 V8 V8 V8 V8

Max. Bearing Thickness

Vertical Oil Clearance

Bore x Stroke

Max. Overall Length

Material Code

Qty. Set

Bearing Shell No.

TORQUE SETTINGS Connecting Rod 45 ft.lbs/61 Nm Main Bearing 85 ft.lbs/115 Nm

4.25 x 3.38 4.188 x 3.75 4.25 x 3.75 4.32 x 3.75 4.32 x 3.75 4.32 x 3.75 4.32 x 3.75 4.32 x 3.75 4.32 x 3.75 4.32 x 3.75 4.32 x 3.75 4.32 x 3.75

Rod

8B527P

60.300/2.3740 60.325/2.3750

Std. 10 20 30 40

5M1277P Std. 10 20 30

5M4366P 20 30 40

63.500/2.5000 63.513/2.5005

1.582/0.0623 .011/.0004 .075/.0030

Main - for 1974-80 engines. 1,2,4,5 69.837/2.7495 74.739/2.9425 2.428/0.0956 69.863/2.7505 74.752/2.9430 3 (Fl) 69.837/2.7495 74.739/2.9425 2.428/0.0956 69.863/2.7505 74.752/2.9430 Overflange length remains constant for standard and oversizes.

.028/.0011 .091/.0036 .028/.0011 .091/.0036

23.67/0.932

F780

2466 IH

24.10/0.949

F780

31.09/1.224

F780

MB2067P U/L MB2625P U/L

69.837/2.7495 74.740/2.9425 69.862/2.7505 74.752/2.9430 Stock not available from fee warehouses.

2.682/0.1056 .028/.0011 (@ .020" u/s) .091/.0036

31.34/1.234

F780

4366 U/L

5M877P

2.430/0.0956 .028/.0011 .091/.0036

24.10/0.949

F780

4362 U/L

69.837/2.7495 74.740/2.9425 2.430/0.0956 .028/.0011 69.862/2.7505 74.752/2.9430 .091/.0036 Overflange length remains constant for standard and oversizes.

31.09/1.224

F780

4363 U/L

1.638/0.0645

19.18/0.755

F23

PD-17-1

1.638/0.0645

19.18/0.755

F23

PD-12-2

1.638/0.0645

17.12/0.674

F23

PD-12-3

1.638/0.0645

19.18/0.755

F23

PD-12-4

1.638/0.0645

19.18/0.755

F23

PD-12-5

2466 IH

3 (Fl)

5C876S

Cam 1

Std. 2 3 4 5

50.750/1.9980 50.775/1.9990 50.343/1.9820 50.368/1.9830 49.962/1.9670 49.987/1.9680 49.555/1.9510 49.581/1.9520 44.400/1.7480 44.425/1.7490

54.090/2.1295 54.115/2.1305 53.683/2.1135 53.708/2.1145 53.302/2.0985 53.327/2.0995 52.895/2.0825 52.921/2.0835 47.740/1.8795 47.765/1.8805

ENGINE

VIN CYL

426 (7.0) Hemi 426 (7.0) Hemi 426 (7.0) Hemi

J R

V8 V8 V8

Bore x Stroke 4.25 x 3.75 4.25 x 3.75 4.25 x 3.75

TORQUE SETTINGS Connecting Rod 75 ft.lbs Main Bearing 100 ft.lbs

Rod

8B527P Std. 10 20 30 40

60.300/2.3740 60.325/2.3750

63.500/2.5000 63.513/2.5005

1.582/0.0623 .011/.0004 .075/.0030

154

23.67/0.932

F780

DODGE Type and Location

Standard Shaft Size

Max. Bearing Thickness

Housing Bore

Vertical Oil Clearance

Max. Overall Length

Material Code

Qty. Set

Bearing Shell No.

Engine Set No. Sizes Available

(Contâ&#x20AC;&#x2122;d.) Main 1,2,4,5

69.837/2.7495 69.862/2.7505

74.739/2.9425 74.752/2.9430

2.428/0.0956 .028/.0011 .914/.0360

24.10/0.949

F780

MB2219P

69.837/2.7495 74.739/2.9425 2.428/0.0956 .028/.0011 69.862/2.7505 74.752/2.9430 .914/.0360 Overflange length remains constant for standard and oversizes.

31.09/1.224

F780

MB2495P

3 (Fl)

Cam 1

54.090/2.1295 54.115/2.1305

1.638/0.0645

19.18/0.755

F23

PD-17-1

50.343/1.9820 50.368/1.9830

53.683/2.1135 53.708/2.1145

1.638/0.0645

19.18/0.755

F23

PD-12-2

49.962/1.9670 49.987/1.9680

53.302/2.0985 53.327/2.0995

1.638/0.0645

17.12/0.674

F23

PD-12-3

49.555/1.9510 49.581/1.9520 44.400/1.7480 44.425/1.7490

52.895/2.0825 52.921/2.0835 47.740/1.8795 47.765/1.8805

1.638/0.0645

19.18/0.755

F23

PD-12-4

1.638/0.0645

19.18/0.755

F23

PD-12-5

VIN CYL

Bore x Stroke

488 7990cc (8.0)

4.00 x 3.88

V10

TORQUE SETTINGS

Connecting Rod 45 ft.lbs Main Bearing 85 ft.lbs

Rod - set is one pair. 10 pairs needed per engine. 53.950/2.1240 57.150/2.2500 1.585/0.0624 .013/.0005 53.975/2.1250 57.163/2.2505 .074/.0029

21.52/0.847

F780

Std. 10 20 30 40

MB3506P U/L

Std. 10 20 30

2.435/0.0959 .005/.0002 .058/.0023

25.40/1.000

2,4,5

76.187/2.9995 76.213/3.0005

81.089/3.1925 81.102/3.1930

2.435/0.0959 .005/.0002 .058/.0023

24.38/0.960

F780

MB3507P U/L

3 (Fl)

76.187/2.9995 76.213/3.0005

81.089/3.1925 81.102/3.1930

2.435/0.0959 .005/.0002 .058/.0023

27.58/1.086

F780

MB3508P U/L

Cam Tower - VIN W Truck only. 53.111/2.0910 56.464/2.2230 1 53.137/2.0920 56.489/2.2240

1.651/0.0650

22.61/0.890

F23

PD-30-1

52.692/2.0745 52.718/2.0755

56.058/2.2070 56.083/2.2080

1.651/0.0650

16.00/0.630

F23

PD-30-2

52.299/2.0590 52.324/2.0600

55.651/2.1910 55.676/2.1920

1.651/0.0650

16.00/0.630

F23

PD-30-3

51.892/2.0430 51.918/2.0440 51.486/2.0270 51.511/2.0280 48.692/1.9170 48.717/1.9180

55.245/2.1750 55.270/2.1760 54.839/2.1590 54.864/2.1600 52.045/2.0490 52.070/2.0500

1.651/0.0650

16.00/0.630

F23

PD-30-4

1.651/0.0650

16.00/0.630

F23

PD-30-5

1.651/0.0650

22.61/0.890

F23

PD-30-6

6M2200P

6C1300S Std.

ENGINE

VIN CYL

Bore x Stroke

488 7990cc (8.0) 488 7990cc (8.0) (EWB)

E E

4.00 x 3.88 4.00 x 3.88

Rod - RACE Series version of 1B481P. 53.950/2.1240 57.150/2.2500 53.975/2.1250 57.163/2.2505

1B481P

2700 IH

81.089/3.1925 81.102/3.1930

F780

76.187/2.9995 76.213/3.0005

5C876S Std.

ENGINE

Main 1,6

5M896P Std. 10

50.750/1.9980 50.775/1.9990

V10 V10

TORQUE SETTINGS

Connecting Rod 45 ft.lbs

1.583/0.0623 .010/.0004 .063/.0025

21.52/0.847

F780

2700H U/L

Rod - RACE Series version of 1B481P. Bearings are .0005" thinner per shell to give .001" extra clearance on standard sized crankshafts. 53.950/2.1240 57.150/2.2500 1.573/0.0619 .010/.0004 51.52/2.028 F781 2 2700HX 53.975/2.1250 57.163/2.2505 .069/.0027 Rod - set is one pair. 10 pairs needed per engine. 53.950/2.1240 57.150/2.2500 1.585/0.0624 .013/.0005 53.975/2.1250 57.163/2.2505 .074/.0029

155

21.52/0.847

F780

2700 IH

1B481H Std. 01 10

1B481HX Std.

1B481P Std. 10 20 30 40

EAGLE EAGLE ENGINE INDEX Engine Disp. 90 1468cc (1.5)..... 90 1468cc (1.5)..... 90 1468cc (1.5)..... 90 1468cc (1.5)..... 98 1597cc (1.6)..... 107 1755cc (1.8)... 112 1834cc (1.8)... 112 1834cc (1.8)... 122 1997cc (2.0)... 122 1997cc (2.0)... 122 1997cc (2.0)... 122 1997cc (2.0)...

Notation

VIN

Cyl.

Mits 4G15 (12V SOHC) Mits 4G15 (12V SOHC) Mits 4G15 (8V SOHC) Mits 4G15 (8V SOHC) Mits 4G61 Mits G37B (8V SOHC) Mits 4G93 (16V SOHC) Mits 4G93 (16V SOHC) Mits G63B (16V DOHC) Mits G63B (16V DOHC), Turbo Mits G63B (16V DOHC) Mits G63B (16V DOHC), Turbo

A K K X Y B C D E F

L4 L4 L4 L4 L4 L4 L4 L4 L4 L4

91-96 91-91 90-90 89-90 89-90 93-94 93-96 92-92 93-94 98-98

Year Line Engine Disp. 1 1 1 1 2 3 4 4 5 5

R U

L4 L4

90-92 90-92

5 5

122 1997cc (2.0)... 122 1997cc (2.0)... 122 1997cc (2.0)... 122 1997cc (2.0)... 122 1997cc (2.0)... 2351cc (2.4)......... 2351cc (2.4)......... 150 (2.5) ............... 150 (2.5) ............... 201 (3.3) ............... 215 3497cc (3.5)...

Notation

VIN

Cyl.

Mits G63B (16V DOHC) A588 (16V DOHC) Mits G63B (16V DOHC) (EBG), Turbo A588 (16V DOHC) (ECF) Mits (16V DOHC) (G63B) Mits 4G64 (16V SOHC) Mits 4G64 (8V SOHC) AMC Eng. AMC Eng. OHV SOHC

V Y F

L4 L4 L4

90-92 95-98 93-97

Year Line 5 6 5

Y V G W H Z T F

L4 L4 L4 L4 L4 L4 V6 V6

96-98 89-91 93-96 92-92 89-89 88-88 93-97 93-97

6 5 5 5 7 7 8 9

EAGLE MODEL INDEX CID

2000 GTX

Model

122

1997

2000 GTX - 4X4

122

1997

PREMIER - LX SUMMIT

150 90

1468

112

1834 2351 2351

SUMMIT - DL

1468

112

1834 2351 2351

SUMMIT - ES

SUMMIT - ESI

SUMMIT - LX

1468

112

1834

1468

112

1834

1468

98 112

1597 1834 2351

Engine Set No. Sizes Available

Type and Location

Liter

Description

2.0 Mits G63B (16V DOHC) 2.0 Mits G63B (16V DOHC) 2.5 AMC Eng. 1.5 Mits 4G15 (12V SOHC) 1.8 Mits 4G93 (16V SOHC) 2.4 Mits 4G64 (16V SOHC) 2.4 Mits 4G64 (8V SOHC) 1.5 Mits 4G15 (12V SOHC) 1.5 Mits 4G15 (8V SOHC) 1.8 Mits 4G93 (16V SOHC) 2.4 Mits 4G64 (16V SOHC) 2.4 Mits 4G64 (8V SOHC) 1.5 Mits 4G15 (12V SOHC) 1.8 Mits 4G93 (16V SOHC) 1.5 Mits 4G15 (12V SOHC) 1.8 Mits 4G93 (16V SOHC) 1.5 Mits 4G15 (8V SOHC) 1.6 Mits 4G61 1.8 Mits 4G93 (16V SOHC) 2.4 Mits 4G64 (16V SOHC)

Standard Shaft Size

ENGINE 90 1468cc (1.5) Mits 4G15 (12V SOHC) 90 1468cc (1.5) Mits 4G15 (12V SOHC) 90 1468cc (1.5) Mits 4G15 (8V SOHC) 90 1468cc (1.5) Mits 4G15 (8V SOHC)

Housing Bore

Years

Model

CID

91-92

SUMMIT - LX

TALON

122 122

1997 1997

88-89 91-92

TALON - DL

107

1755

92-93

TALON - ES

122

1997

93-96

TALON - ESI TALON - TSI

122 122

1997 1997

VISION - ESI

201 215 215 90

3497 3497 1468

1468

VISTA - 4X4

122 122

1997 1997

VISTA - DL

1468

2351

92 91-96 89-90

VISION - TSI VISTA

92-96 93-96 92 91-96 93-96 VISTA - GT 95-96 94-95 VISTA - LX 89-90

Liter

Description

Years

2.4 Mits 4G64 (8V SOHC) 2.0 A588 (16V DOHC) 2.0 Mits G63B (16V DOHC) 1.8 Mits G37B (8V SOHC) 2.0 Mits G63B (16V DOHC) 2.0 A588 (16V DOHC) 2.0 Mits G63B (16V DOHC) 3.3 OHV 3.5 SOHC 3.5 SOHC 1.5 Mits 4G15 (12V SOHC) 1.5 Mits 4G15 (8V SOHC) 2.0 Mits (16V DOHC) 2.0 Mits G63B (16V DOHC) 1.5 Mits 4G15 (12V SOHC) 1.5 Mits 4G15 (8V SOHC) 1.5 Mits 4G15 (12V SOHC) 1.5 Mits 4G15 (8V SOHC) 1.5 Mits 4G15 (8V SOHC)

92 96-98 90-92 93-94 93-94 95-98 90-98 93-97 95-97 93-97 91 90 89-91 90-91 91 90 91 90 90

89-90 92-96 93-96

Max. Bearing Thickness

Vertical Oil Clearance

VIN CYL

Bore x Stroke

75.5mm x 82mm

Max. Overall Length

Material Code

Qty. Set

Bearing Shell No.

TORQUE SETTINGS Connecting Rod 23-25 ft.lbs/31-34 Nm Main Bearing 36-40 ft.lbs/49-54 Nm

Rod

4B1130 Std. .25 .50 .75 1.0

41.981/1.6528 42.000/1.6535

45.000/1.7717 45.020/1.7724

1.493/0.0588 .015/.0006 .079/.0031

156

15.60/0.614

F810

1130A IH

EAGLE Type and Location

Standard Shaft Size

Max. Bearing Thickness

Housing Bore

Vertical Oil Clearance

Max. Overall Length

Material Code

Qty. Set

Bearing Shell No.

Engine Set No. Sizes Available

(Contâ&#x20AC;&#x2122;d.) Main 1,2,4,5

47.981/1.8890 48.000/1.8898

52.000/2.0472 52.020/2.0480

1.990/0.0783 .020/.0008 .085/.0033

19.13/0.753

47.981/1.8890 52.000/2.0472 1.990/0.0783 .020/.0008 48.000/1.8898 52.020/2.0480 .085/.0033 Overflange length remains constant for standard and undersizes.

23.95/0.943

3(Fl)

ENGINE

VIN CYL

Bore x Stroke

98 1597cc (1.6) Mits 4G61

82.3mm x 75mm

F810 F810

8 2

1124A U/L

5M1124 Std. .25 .50 .75

1125A IH

TORQUE SETTINGS

Connecting Rod 23-25 ft.lbs/31-34 Nm Main Bearing 36-40 ft.lbs/49-54 Nm

Rod 44.991/1.7713 45.000/1.7717

48.000/1.8898 48.020/1.8905

1.494/0.0588 .012/.0005 .067/.0026

23.50/0.925

Main - half groove bearing set. 1,2,4,5 56.980/2.2433 61.000/2.4016 57.000/2.2441 61.020/2.4024 1,2,4,5 56.980/2.2433 61.000/2.4016 57.000/2.2441 61.020/2.4024

1.990/0.0783 .020/.0008 .086/.0034 1.990/0.0783 .020/.0008 .086/.0034

23.01/0.906

1146A IH 1147A U 1144A L

F810

28.95/1.140

F810

1148A IH

.020/.0008 .086/.0034 .020/.0008 .086/.0034

23.00/0.906

F810

28.95/1.140

F810

1147A IH 1148A IH

1.506/0.0593 .020/.0008 .076/.0030 1.496/0.0589 .043/.0017 .099/.0039

19.25/0.758

F830

SH1465

16.00/0.630

F830

SH1466

56.980/2.2433 61.000/2.4016 1.990/0.0783 .020/.0008 57.000/2.2441 61.020/2.4024 .086/.0034 Overflange length remains constant for standard and undersizes. Main - full groove bearing set. 1,2,4,5 56.980/2.2433 61.000/2.4016 1.990/0.0783 57.000/2.2441 61.020/2.4024 3 (Fl) 56.980/2.2433 61.000/2.4016 1.990/0.0783 57.000/2.2441 61.020/2.4024 Overflange length remains constant for standard and undersizes. 42.024/1.6545 (Max.) 39.025/1.5364 (Max.)

F810

23.01/0.906

3 (Fl)

Balance Shaft RHF 38.974/1.5344 (Max.) RHR, 35.977/1.4164 LHR (Max.)

F810

5M1144 Std. .25 .50 .75 1.0

5M1147 Std. .25 .50 .75 1.0

3BS8385 Std.

ENGINE

VIN CYL

Bore x Stroke

107 1755cc (1.8) Mits G37B (8V SOHC)

80.6mm x 86mm

4B1146 Std. .25 .50 .75 1.0

TORQUE SETTINGS

Connecting Rod 23-25 ft.lbs/31-34 Nm Main Bearing 36-40 ft.lbs/49-54 Nm

Rod 52.973/2.0855 53.000/2.0866

56.007/2.2050 56.021/2.2055

1.493/0.0588 .021/.0008 .076/.0030

25.13/0.989

Main - half groove bearing set. 1,2,4,5 56.980/2.2433 61.000/2.4016 57.000/2.2441 61.020/2.4024 1,2,4,5 56.980/2.2433 61.000/2.4016 57.000/2.2441 61.020/2.4024 3 (Fl) 56.980/2.2433 61.000/2.4016 57.000/2.2441 61.020/2.4024

1.990/0.0783 .020/.0008 .086/.0034 1.990/0.0783 .020/.0008 .086/.0034 1.990/0.0783 .020/.0008 .086/.0034

23.01/0.906

Main - full groove bearing set. 1,2,4,5 56.980/2.2433 61.000/2.4016 57.000/2.2441 61.020/2.4024 3 (Fl)

F820

F810

23.01/0.906

F810

28.95/1.140

F810

1.990/0.0783 .020/.0008 .086/.0034

23.00/0.906

F810

1136AL IH 1147A U 1144A L 1148A IH 1147A IH

56.980/2.2433 57.000/2.2441

61.000/2.4016 61.020/2.4024

1.990/0.0783 .020/.0008 .086/.0034

28.95/1.140

F810

1148A IH

Balance Shaft 41.976/1.6526 RHF (Max.)

45.024/1.7726 (Max.)

1.505/0.0593 .025/.0010 .079/.0031

19.00/0.748

F818

8387

RHR, LHR

44.025/1.7333 (Max.)

1.495/0.0589 .025/.0010 .079/.0031

21.00/0.827

F818

8388

40.967/1.6129 (Max.)

157

4B1136 Std. .25 .50 .75 1.0

5M1144 Std. .25 .50 .75 1.0

5M1147 Std. .25 .50 .75 1.0

3BS8387 Std.

EAGLE Engine Set No. Sizes Available

Type and Location

Standard Shaft Size

ENGINE

Housing Bore

VIN CYL

112 1834cc (1.8) Mits 4G93 (16V SOHC) 112 1834cc (1.8) Mits 4G93 (16V SOHC)

Max. Bearing Thickness

Vertical Oil Clearance

Bore x Stroke

81mm x 89mm

Max. Overall Length

Material Code

Qty. Set

Bearing Shell No.

TORQUE SETTINGS Connecting Rod 15 ft.lbs/20 Nm + 1/4 turn Main Bearing 18 ft.lbs/25 Nm + 1/4 turn Tighten main bearing caps from center, working towards end caps.

Rod - To be superceded by 4B8036A when stock exhausted. 44.980/1.7709 48.000/1.8898 1.492/0.0587 .016/.0006 45.000/1.7717 48.015/1.8904 .077/.0030

16.80/0.661

F780

8036 IH

Rod - High Strength Aluminum Silicon material. 44.980/1.7709 48.000/1.8898 1.492/0.0587 .016/.0006 45.000/1.7717 48.015/1.8904 .077/.0030

16.80/0.661

F810

8036A IH

Main - To be superceded by 5M8037A when stock exhausted. 49.982/1.9678 54.000/2.1260 1.991/0.0784 .018/.0007 1-5 50.000/1.9685 54.018/2.1267 .080/.0031

19.13/0.753

F780

8037 U/L

Main - High Strength Aluminum Silicon material. 1-5 49.982/1.9678 54.000/2.1260 1.991/0.0784 .018/.0007 Std. .25 .50 .75 1.0 50.000/1.9685 54.018/2.1267 .080/.0031

19.13/0.753

F810

8037A U/L

1.98/0.078

F817

8037T IH

4B8036 Std. .25 .50 .75 1.0

4B8036A Std. .25 .50 .75 1.0

5M8037 Std. .25 .50

5M8037A

1T8037 Std.

Thrust 3

56.000/2.2047 75.400/2.9685 56.250/2.2146 75.700/2.9803 Set includes 2 pieces, use on number 3 position. Required with 5M8037.

ENGINE 122 1997cc (2.0) Mits G63B (16V DOHC) 122 1997cc (2.0) Mits G63B (16V DOHC) Turbo 122 1997cc (2.0) Mits G63B (16V DOHC) 122 1997cc (2.0) Mits G63B (16V DOHC) Turbo 122 1997cc (2.0) Mits G63B (16V DOHC) 122 1997cc (2.0) Mits G63B (16V DOHC) (EBG) Turbo 122 1997cc (2.0) Mits (16V DOHC) (G63B) 2351cc (2.4) Mits 4G64 (16V SOHC) 2351cc (2.4) Mits 4G64 (8V SOHC)

4B1146 Std. .25 .50 .75 1.0

4B1185 Std. .25 .50 .75 1.0

VIN CYL

Bore x Stroke

85mm x 88mm

G W

L4 L4

86.5mm x 100mm 86.5mm x 100mm

TORQUE SETTINGS Connecting Rod 23-25 ft.lbs/31-34 Nm Main Bearing 36-40 ft.lbs/49-54 Nm

Rod - for engines 1989-6/92. 44.991/1.7713 48.000/1.8898 45.000/1.7717 48.020/1.8905

1.494/0.0588 .012/.0005 .067/.0026

23.50/0.925

F810

1146A IH

Rod - for engines from 6/92-97. 44.981/1.7709 47.998/1.8897 44.996/1.7715 48.019/1.8905

1.493/0.0588 .016/.0006 .078/.0031

21.10/0.831

F810

1185A IH

23.01/0.906

F810

23.01/0.906

F810

1147A U 1144A L

28.95/1.140

F810

1148A IH

23.00/0.906

F810

28.95/1.140

F810

1147A IH 1148A IH

Main - for 2.0L engines 1989-6/92 - Half Groove. 1,2,4,5 56.980/2.2433 61.000/2.4016 1.990/0.0783 Std. .25 .50 .75 1.0 57.000/2.2441 61.020/2.4024 1,2,4,5 56.980/2.2433 61.000/2.4016 1.990/0.0783 57.000/2.2441 61.020/2.4024

5M1144

.020/.0008 .086/.0034 .020/.0008 .086/.0034

3 (Fl)

56.980/2.2433 61.000/2.4016 1.990/0.0783 .020/.0008 57.000/2.2441 61.020/2.4024 .086/.0034 Overflange length remains constant for standard and undersizes.

Main - for 2.0L engines 1989-6/92 - Full Groove. 1,2,4,5 56.980/2.2433 61.000/2.4016 1.990/0.0783 Std. .25 .50 .75 1.0 57.000/2.2441 61.020/2.4024 3 (Fl) 56.980/2.2433 61.000/2.4016 1.990/0.0783 57.000/2.2441 61.020/2.4024 Overflange length remains constant for standard and undersizes.

5M1147

158

.020/.0008 .086/.0034 .020/.0008 .086/.0034

EAGLE Type and Location

Standard Shaft Size

Max. Bearing Thickness

Housing Bore

Vertical Oil Clearance

Max. Overall Length

Material Code

Qty. Set

Bearing Shell No.

Engine Set No. Sizes Available

(Contâ&#x20AC;&#x2122;d.) Main - for 2.0L engines from 6/92-97 and 2.4L engines from 1992-96. 1,2,4,5 56.985/2.2435 61.000/2.4016 1.990/0.0783 .020/.0008 57.000/2.2441 61.021/2.4024 .082/.0032

21.00/0.827

3 (Fl)

25.40/1.000

56.985/2.2435 61.000/2.4016 1.990/0.0783 .020/.0008 57.000/2.2441 61.021/2.4024 .082/.0032 Overflange length remains constant for standard and undersizes.

F810 F810

8 2

Main - Alt set to 5M1186 with +0.010" overflange length increase. * See dimensional information below. 1,2,4,5 56.985/2.2435 61.000/2.4016 2.115/0.0833 .020/.0008 21.00/0.827 F810 8 57.000/2.2441 61.021/2.4024 (@ 0.25 mm u/s) .082/.0032 3 (Fl) 56.985/2.2435 61.000/2.4016 2.115/0.0833 .020/.0008 25.65/1.010 F810 2 57.000/2.2441 61.021/2.4024 (@ 0.25 mm u/s) .082/.0032 Stock not available from fee warehouses.

1186A U/L

5M1186 Std. .25 .50 .75 1.0

1187A IH

1186A U/L 1213A IH

5M1213 .25 .50 .75 1.0

45.024/1.7726 (Max.)

1.505/0.0593 .025/.0010 .079/.0031

19.00/0.748

F818

Std. .25 .50

LHR

40.967/1.6129 (Max.)

44.025/1.7333 (Max.)

1.495/0.0589 .025/.0010 .079/.0031

21.00/0.827

F818

8388

RHR

40.967/1.6129 (Max.)

44.025/1.7333 (Max.)

1.495/0.0589 .025/.0010 .079/.0031

21.00/0.827

F818

8389

ENGINE

VIN CYL

122 1997cc (2.0) A588 (16V DOHC) Y 122 1997cc (2.0) A588 (16V DOHC) (ECF) Y

3BS8389

8387

Bore x Stroke

TORQUE SETTINGS

87.5mm x 83mm

Connecting Rod 20 ft.lbs + 90 deg Main Bearing 22 ft.lbs M8 bolts with bedplate Main Bearing 30 ft.lbs + 90 deg M10 bolts only Main Bearing 40 ft.lbs M10 bolts with bedplate Main Bearing 60 ft.lbs M11 bolts only

Rod 47.991/1.8894 48.006/1.8900

50.991/2.0075 51.006/2.0081

1.490/0.0587 .005/.0002 .061/.0024

Rod - .002" oversize OD version of 4B1635P. 47.991/1.8894 51.041/2.0095 1.640/0.0646 .005/.0002 48.006/1.8900 51.056/2.0101 (@ .25 mm u/s) .061/.0024

20.50/0.807

F780

Std. .25 .50 .75 1.0

9091 IH

Std. .25 .50 .75

Main - suits engines from 1996 on. 1,2,4,5 51.991/2.0469 55.997/2.2046 1.986/0.0782 52.006/2.0475 56.007/2.2050 3 (Fl) 51.991/2.0469 55.997/2.2046 1.986/0.0782 52.006/2.0475 56.007/2.2050 Overflange length remains constant for standard and undersizes.

.018/.0007 .071/.0028 .018/.0007 .071/.0028

19.96/0.786 26.26/1.034

F780

Main - .002" oversize OD version of 5M2028P. 1,2,4,5 51.991/2.0469 56.048/2.2066 2.011/0.0792 52.006/2.0475 56.058/2.2070 (@ STD u/s) 3 (Fl) 51.991/2.0469 56.048/2.2066 2.011/0.0792 52.006/2.0475 56.058/2.2070 (@ STD u/s) Overflange length remains constant for standard and undersizes.

.018/.0007 .071/.0028 .018/.0007 .071/.0028

19.96/0.786

F780

26.26/1.034

F780

Main - 1995 engines only (opposite tang position in lower half). 1,2,4,5 51.991/2.0469 55.997/2.2046 1.986/0.0782 .018/.0007 52.006/2.0475 56.007/2.2050 .071/.0028

19.96/0.786

F780

1,2,4,5

51.991/2.0469 52.006/2.0475

55.997/2.2046 56.007/2.2050

1.986/0.0782 .018/.0007 .072/.0028

19.96/0.786

F780

4342 U

3 (Fl)

51.991/2.0469 52.006/2.0475 51.991/2.0469 52.006/2.0475

55.997/2.2046 56.007/2.2050 55.997/2.2046 56.007/2.2050

1.986/0.0782 .018/.0007 .072/.0028 1.986/0.0782 .018/.0007 .072/.0028

26.26/1.034

F780

26.26/1.034

F780

4373 L 4343 U

3 (Fl)

159

F780

4B1635P

7171 IH

4342 U/L 4343 U/L

9093 U/L 9094 U/L

4372 L

4B1635PO/S2

5M2028P Std. .25 .50 .75

5M2028PO/S2 25 50 75

5M4372P Std. .25 .50 .75

EAGLE Engine Set No. Sizes Available

Type and Location

Standard Shaft Size

Housing Bore

Max. Bearing Thickness

Vertical Oil Clearance

ENGINE

VIN CYL

Bore x Stroke

150 (2.5) AMC Eng. 150 (2.5) AMC Eng.

H Z

3.88 x 3.19 3.88 x 3.19

L4 L4

Max. Overall Length

Material Code

Qty. Set

Bearing Shell No.

TORQUE SETTINGS Connecting Rod 33 ft.lbs/45 Nm Main Bearing 80 ft.lbs/108 Nm

Rod

4B960P

53.208/2.0948 53.226/2.0955

56.083/2.2080 56.096/2.2085

1.425/0.0561 .017/.0006 .074/.0029

21.26/0.837

F780

1480 IH

63.470/2.4988 63.487/2.4995

68.351/2.6910 68.377/2.6920

2.421/0.0953 .022/.0008 .091/.0036

25.04/0.986

F780

8872 U/L

63.470/2.4988 68.351/2.6910 2.421/0.0953 .022/.0008 63.487/2.4995 68.377/2.6920 .091/.0036 Overflange length remains constant for standards and undersizes.

32.26/1.270

F780

8873 U/L

1.580/0.0620

17.65/0.695

F23

N-7-1

1.580/0.0620

17.65/0.695

F23

N-7-2

1.580/0.0620

17.65/0.695

F23

N-7-3

1.580/0.0620

17.65/0.695

F23

N-7-4

Std. 01 10 20 30 40 50

5M1568P

Main 1,2,4,5

Std. 10 20 30 3 (Fl)

4C549S

Cam 1

Std. 2 3 4

51.549/2.0295 51.575/2.0305 51.295/2.0195 51.321/2.0205 51.041/2.0095 51.067/2.0105 50.787/1.9995 50.813/2.0005

54.750/2.1555 54.775/2.1565 54.496/2.1455 54.521/2.1465 54.242/2.1355 54.267/2.1365 53.988/2.1255 54.013/2.1265

ENGINE

VIN CYL

Bore x Stroke

201 (3.3) OHV

93mm x 81mm

6B1410A Std. .25 .50 .75 1.0

4M1958P .25 .50 .75 1.0

TORQUE SETTINGS Connecting Rod 40 ft.lbs/54 Nm + 1/4 turn Main Bearing 30 ft.lbs/41 Nm + 1/4 turn

Rod - High Strength Aluminum Silicon material (supercedes 6B1410P). 57.988/2.2830 60.993/2.4013 1.483/0.0584 .013/.0005 16.54/0.651 58.014/2.2840 61.006/2.4018 .068/.0027

F810

1470A IH

Main - Alt set to 4M1946P with +0.010" overflange length increase. * See dimensional information below. 63.988/2.5192 67.993/2.6769 1.983/0.0781 .013/.0005 24.49/0.964 F780 6 1,3,4 64.013/2.5202 68.014/2.6777 .051/.0020 2 (Fl)

63.988/2.5192 67.993/2.6769 64.013/2.5202 68.014/2.6777 to be disontinued when stock exhausted.

1.983/0.0781 .013/.0005 .051/.0020

24.13/0.950

F780

1948 U/L

1958 U/L

4M7278A Std. .25 .50 .75

Main - Supercedes 4M1946P. 63.988/2.5192 67.993/2.6769 1,2,4 64.013/2.5202 68.014/2.6777

1.983/0.0781 .013/.0005 .051/.0020

24.49/0.964

F810

1948A U/L

63.988/2.5192 67.993/2.6769 1.983/0.0781 .013/.0005 64.013/2.5202 68.014/2.6777 .051/.0020 Overflange length remains constant for standard and undersizes.

23.88/0.940

F810

7278A U/L

Cam - supercedes 4C1405S. Set has OD groove on #2 & #3 position bearings. 50.724/1.9970 54.089/2.1295 1.643/0.0647 23.75/0.935 1 50.775/1.9990 54.115/2.1305

F23

PD-28-1

2 (Fl)

4C1405BS Std.

3 4

50.292/1.9800 50.343/1.9820 49.911/1.9650 49.962/1.9670 49.530/1.9500 49.581/1.9520

53.683/2.1135 53.708/2.1145 53.302/2.0985 53.327/2.0995 52.896/2.0825 52.921/2.0835

1.659/0.0653

15.62/0.615

F23

PD-28-2B

1.659/0.0653

15.62/0.615

F23

PD-28-3B

1.643/0.0647

15.62/0.615

F23

PD-28-4

160

EAGLE Type and Location

Standard Shaft Size

Max. Bearing Thickness

Housing Bore

Vertical Oil Clearance

ENGINE

VIN CYL

Bore x Stroke

215 3497cc (3.5) SOHC

96mm x 81mm

Max. Overall Length

63.988/2.5192 64.013/2.5202

67.993/2.6769 68.014/2.6777

24.49/0.964

63.988/2.5192 67.993/2.6769 1.983/0.0781 .013/.0005 64.013/2.5202 68.014/2.6777 .051/.0020 Overflange length remains constant for standard and undersizes.

28.70/1.130

161

Bearing Shell No.

Engine Set No. Sizes Available

TORQUE SETTINGS

1.983/0.0781 .013/.0005 .051/.0020

2 (Fl)

Qty. Set

Connecting Rod 40 ft.lbs/54 Nm + 1/4 turn Main Bearing 30 ft.lbs/41 Nm + 1/4 turn

Rod - High Strength Aluminum Silicon material (supercedes 6B1410P). 57.988/2.2830 60.993/2.4013 1.483/0.0584 .013/.0005 16.54/0.651 58.014/2.2840 61.006/2.4018 .068/.0027 Main 1,3,4

Material Code

F810

F780 F780

6 2

6B1410A

1470A IH

Std. .25 .50 .75 1.0

MB3340P U/L

Std. .25 .50 .75

MB3471P U/L

4M2010P

FORD FORD ENGINE INDEX Engine Disp. 1295cc (1.3)......... 1295cc (1.3)......... 1297cc (1.3)......... 1297cc (1.3)......... 1297cc (1.3)......... 1297cc (1.3)......... 1558cc (1.6)......... 98 1598cc (1.6)..... 98 1598cc (1.6)..... 98 1598cc (1.6)..... 98 1598cc (1.6)..... 98 1598cc (1.6)..... 98 1598cc (1.6)..... 98 1598cc (1.6)..... 110 (1.8) ............... 110 (1.8) ............... 110 (1.8) ............... 112 (1.8) ............... 116 (1.9) ............... 116 (1.9) ............... 121 (2.0) ............... 121 1989cc (2.0)... 121 1989cc (2.0)... 122 1989cc (2.0)... 122 1989cc (2.0)... 122 1989cc (2.0)... 122 1989cc (2.0)... 122 1989cc (2.0)... 122 1989cc (2.0)... 122 1989cc (2.0)... 122 (2.0) ............... 133 (2.2) ............... 133 (2.2) ............... 134 (2.2) ............... 140 (2.3) ............... 140 (2.3) ............... 140 (2.3) ............... 140 (2.3) ............... 140 (2.3) ............... 140 (2.3) ............... 140 (2.3) ............... 140 (2.3) ............... 140 (2.3) ............... 140 (2.3) ............... 140 (2.3) ............... 140 (2.3) ............... 140 (2.3) ............... 140 (2.3) ............... 144 (2.4) ............... 152 2450cc (2.5)... 155 2450cc (2.5)... 155 2450cc (2.5)... 153 (2.5) ............... 153 (2.5) ............... 170 (2.8) ............... 170 (2.8) ............... 170 (2.8) ............... 171 (2.8) ............... 171 (2.8) ............... 177 (2.9) ............... 182 (3.0) ............... 182 (3.0) ............... 182 (3.0) ............... 182 (3.0) ............... 182 (3.0) ............... 182 (3.0) ............... 182 (3.0) ............... 195 (3.2) ............... 200 (3.3) ............... 200 (3.3) ............... 200 (3.3) ............... 200 (3.3) ............... 200 (3.3) ............... 221 (3.6) ............... 232 (3.8) ............... 232 (3.8) ............... 232 (3.8) ............... 232 (3.8) ...............

Notation

VIN

Cyl.

Mazda B3 Mazda B3 Courier Van (HCS) Escort (HCS) Fiesta (HCS) Ka (HCS) Escort & Cortina Lotus (Twin Cam) OHV (Fiesta) OHC OHC OHC OHC OHC, Turbo OHV (Kent / Pinto) Mazda VB Mazda VB Mazda VB Mazda BP DOHC SOHC SOHC Duratec DOHC (Zetec) DOHC (Zetec) DOHC (Zetec) Mazda FS DOHC DOHC (Zetec) OHC Mazda RF,Diesel SOHC OHC (Pinto) Mazda MA Mazda F2 Mazda F2, Turbo Mazda S2,Diesel OHC OHC OHC OHC Duratec Mits 4D55, Turbo,Diesel OHC OHV (HSC) OHV (HSC) OHC, Turbo OHC, Turbo OHV (HSC) OHC Duratec

H K

L4 L4 L4 L4 L4 L4 L4

89-97 88-89 88-on 88-on 88-on 88-on 65-75

1 1 2 2 2 2 3

L4 L4 L4 L4 L4 L4 L4 L4 L4 L4 L4 L4 L4 L4 L4 L4 L4 L4 L4 L4 L4 L4 L4 L4 L4 L4 L4 L4 L4 L4 L4 L4 L4 L4 L4 L4 L4 L4 L4 L4 L4 L6 V6 V6 V6 L4 L4 L6 L6 L6 V6 V6 V6 V6 V6 V6 V6 V6 V6 V6 V6 L6 L6 L6 L6 L6 V8 V6 V6 V6 V6

78-80 81-85 82-85 83-85 83-83 84-85 71-73 72-76 77-78 79-79 91-96 85-90 86-96 05-06 95-04 96-00 02-04 93-97 01-04 83-88 84-87 97-04 71-74 81-82 89-92 89-92 83-84 81-82 83-85 80-97 77-80 01-06 85-87 91-93 84-87 85-91 81-88 79-87 85-94 74-79 03-06 60-66 93-97 98-00 95-00 98-01 86-90 60-67 67-72 68-72 83-86 74-79 86-92 93-98 01-05 96-06 96-05 86-06 99-04 89-95 93-95 63-64 65-67 80-82 68-79 83-83 62-63 82-87 88-04 84-84 89-95

4 6 6 6 6 6 5 7 7 7 1 8 8 15 14 14 14 10 14 13 12 11 9 7 16 16 17 13 13 13 13 20 19 13 18 18 13 13 18 13 20 21 23 24 24 22 18 21 21 21 25 25 26 27 24 24 24 27 27 28 28 21 29 29 29 29 30 31 31 31 31

Mazda KL (24V DOHC) Duratec Duratec SOHC OHV (HSC)

OHV (Vulcan) Duratec Duratec Duratec OHV (Vulcan) OHV (Vulcan) SHO (DOHC) SHO (DOHC) 4 Main 7 Main 7 Main 7 Main 7 Main OHV OHV OHV OHV, Supercharged

2 4 5 7 8 W A C 8 9 J N 3 Z 5 A B C H P X 1 C L P 2 6 A B D E M R S T W X Y Z B G L C D F U S Z T 1 1 2 S U V Y P B T X 3 4 C R

Year Line Engine Disp. 240 (3.9) ............... 240 (3.9) ............... 240 (3.9) ............... 240 (3.9) ............... 240 (3.9) ............... 245 (4.0) ............... 245 (4.0) ............... 245 (4.0) ............... 250 (4.1) ............... 250 (4.1) ............... 255 (4.2) ............... 256 (4.2) ............... 260 (4.3) ............... 281 (4.6) ............... 281 (4.6) ............... 281 (4.6) ............... 281 (4.6) ............... 281 (4.6) ............... 281 (4.6) ............... 289 (4.7) ............... 289 (4.7) ............... 289 (4.7) ............... 300 (4.9) ............... 300 (4.9) ............... 300 (4.9) ............... 300 (4.9) ............... 300 (4.9) ............... 302 (5.0) ............... 302 (5.0) ............... 302 (5.0) ............... 302 (5.0) ............... 302 (5.0) ............... 302 (5.0) ............... 302 (5.0) ............... 302 (5.0) ............... 302 (5.0) ............... 330 (5.4) ............... 330 (5.4) ............... 330 (5.4) ............... 330 (5.4) ............... 330 (5.4) ............... 330 (5.4) ............... 351 (5.8) ............... 351 (5.8) ............... 351 (5.8) ............... 351 (5.8) ............... 351 (5.8) ............... 351 (5.8) ............... 351 (5.8) ............... 351 (5.8) ............... 351 (5.8) ............... 351 (5.8) ............... 351 (5.8) ............... 352 (5.8) ............... 360 (5.9) ............... 361 (5.9) ............... 370 (6.1) ............... 390 (6.4) ............... 390 (6.4) ............... 390 (6.4) ............... 390 (6.4) ............... 390 (6.4) ............... 390 (6.4) ............... 390 (6.4) ............... 400 (6.6) ............... 400 (6.6) ............... 400 (6.6) ............... 401 (6.6) ............... 410 ....................... 415 (6.8) ............... 415 (6.8) ............... 420 (6.9) ............... 427 (7.0) ............... 427 (7.0) ............... 428 (7.0) ............... 428 (7.0) ............... 428 (7.0) ............... 428 (7.0) ............... 429 (7.0) ...............

162

Notation

VIN

OHV

A B E V E K X C L D 2

SOHC SOHC DOHC SOHC SOHC DOHC, Supercharged

6 9 V W X Y

SOHC SOHC OHV

C N 9 B E K Y D E F G J M N P T SOHC, Supercharged SOHC SOHC SOHC SOHC - Bi-Fuel Windsor Modified Windsor Cleveland Modified Windsor Cleveland Windsor Cleveland Windsor Windsor

3 5 L M Z C G G H H H M M Q Q R Y

H M S X Y Z S Z

Diesel

S Y 1 W P Q R C

Cyl.

Year Line

L6 L6 L6 L6 L6 V6 V6 V6 L6 L6 V8 V6 V8 V8 V8 V8 V8 V8 V8 V8 V8 V8 L6 L6 L6 L6 L6 V8 V8 V8 V8 V8 V8 V8 V8 V8 V8 V8 V8 V8 V8 V8 V8 V8 V8 V8 V8 V8 V8 V8 V8 V8 V8 V8 V8 V8 V8 V8 V8 V8 V8 V8 V8 V8 V8 V8 V8 V8 V8 V10 V10 V8 V8 V8 V8 V8 V8 V8 V8

65-67 68-75 68-70 68-72 68-72 97-03 03-03 90-01 80-80 69-79 80-82 97-06 62-64 96-02 96-03 96-01 92-05 96-04 03-04 63-67 68-68 68-68 82-88 65-79 80-82 78-79 83-96 69-95 87-93 68-91 68-79 68-68 84-86 85-96 96-01 91-95 75-77 99-03 04-05 97-05 97-05 98-03 95-95 80-82 80-91 70-74 75-79 69-97 70-71 69-71 71-74 71-74 93-95 64-67 68-77 64-66 79-91 64-67 67-77 74-76 68-69 68-70 67-71 67-68 75-77 71-79 80-82 58-79 66-67 97-06 05-06 83-87 64-67 67-69 66-67 67-70 67-70 68-68 70-71

32 32 32 32 32 34 34 33 35 35 30 36 30 37 37 38 37 37 38 30 30 30 32 32 32 32 32 30 30 30 30 30 30 30 30 30 40 39 39 39 39 39 42 43 42 41 43 42 41 42 41 42 42 40 40 40 44 40 40 40 40 40 40 40 43 43 43 45 40 47 47 46 40 40 40 40 40 40 44

FORD FORD ENGINE INDEX (Cont’d.) Engine Disp. 429 (7.0) ............... 429 (7.0) ............... 429 (7.0) ............... 429 (7.0) ............... 445 (7.3) ............... 445 (7.3) ............... 445 (7.3) ............... 445 (7.3) ............... 460 (7.5) ...............

Notation

Powerstroke Engine, Turbo,Diesel Powerstroke Engine, Turbo,Diesel Powerstroke Engine, Turbo,Diesel Diesel

VIN

Cyl.

J K N Z C

V8 V8 V8 V8 V8

70-71 69-71 68-73 69-70 93-93

Year Line Engine Disp. 44 44 44 44 48

94-03

94-94

M A

V8 V8

88-94 72-79

46 44

Notation

460 (7.5) ............... 460 (7.5) ............... 460 (7.5) ............... 460 (7.5) ............... 475 (7.8) ............... 477 (7.8) ............... 534 (8.8) ...............

VIN

Cyl.

C G J L

V8 V8 V8 V8 V8 V8 V8

Year Line 73-78 87-97 73-79 80-87 58-79 58-81 58-81

44 44 44 44 45 45 45

FORD MODEL INDEX Model

AEROSTAR

ASPIRE ASPIRE - SE BRONCO

BRONCO ROADSTER BRONCO - WAGON

BRONCO II CLUB

CLUB WAGON CONTOUR CONTOUR - GL CONTOUR - LX CONTOUR - SE CONTOUR - SPORT CONTOUR - SVT COUNTRY SEDAN

CID

122 245 361 140 171 182 245

Liter

Description

2.0 Mazda MA 4.0 OHV

170 200 240 300 289 302 351 351 400

2.3 2.8 3.0 4.0 1.3 1.3 2.8 3.3 3.9 4.9 4.7 5.0 5.8 5.8 6.6

170 289 302 170 200 289 302 171 177 200 260 289 352 390 144 170 240 121 155 121 155 121 155 155 121 155 155 144 170 200 200 240 260 289 302 351 351 352 390 400 427 428 429

2.8 4.7 5.0 2.8 3.3 4.7 5.0 2.8 2.9 3.3 4.3 4.7 5.8 6.4 2.4 2.8 3.9 2.0 2.5 2.0 2.5 2.0 2.5 2.5 2.0 2.5 2.5 2.4 2.8 3.3 3.3 3.9 4.3 4.7 5.0 5.8 5.8 5.8 6.4 6.6 7.0 7.0 7.0

1295 1295

1989 2450 1989 2450 1989 2450 2450 1989 2450 2450

OHC OHV (Vulcan) OHV Mazda B3 Mazda B3 7 Main

Modified Windsor

7 Main

4 Main

DOHC (Zetec) Duratec DOHC (Zetec) Duratec DOHC (Zetec) Duratec Duratec DOHC (Zetec) Duratec Duratec 4 Main 7 Main

Cleveland Windsor

Years

Model

81-82 01 66 86-87 86 86-97 90-97 94-97 94-95 67-72 74 66-67 80-93 66-68 69-96 78-82 78-96 78-79

COUNTRY SEDAN COUNTRY SQUIRE

68-69 68 69 68-72 73 68 68-73 84-85 86-90 63 63-64 63-64 64 64 62-66 62-67 67 97-00 98-00 95-98 95-98 95-98 95-98 95-98 96 96-97 98-00 62 62-67 63-64 65-67 65-70 63-64 63-67 68-72 70-74 69-74 64-67 64-71 71-74 64-66 68-70 69-73

COUNTRY SQUIRE LX COURIER CROWN VICTORIA CROWN VICTORIA LX CROWN VICTORIA POLICE INTERCEPTOR CROWN VICTORIA - S CROWN VICTORIA TOURING SEDAN CUSTOM

CUSTOM 500

163

CID

Liter

Description

Years

460 144 170 200 200 240 260 289 302 351 351 351 352 390 400 427 428 429 460

7.5 2.4 2.8 3.3 3.3 3.9 4.3 4.7 5.0 5.8 5.8 5.8 5.8 6.4 6.6 7.0 7.0 7.0 7.5

302 110 140 281 302 351

5.0 1.8 2.3 4.6 5.0 5.8

Windsor

87-91 72-79 77-82 92-05 87-91 87-91

281 302 351

4.6 SOHC 5.0 5.8 Windsor

92-98 87-91 87-91

281 281 302 351

4.6 SOHC 4.6 SOHC 5.0 5.8 Windsor

93-98 92-98 87-91 87-91

281 240 260 289 302 351 351 352 390 400 427 428 429 240 289 302 351 351 351 390 400 427 428 429 460

4.6 3.9 4.3 4.7 5.0 5.8 5.8 5.8 6.4 6.6 7.0 7.0 7.0 3.9 4.7 5.0 5.8 5.8 5.8 6.4 6.6 7.0 7.0 7.0 7.5

92 68-72 64 65-67 68-72 70-72 69-72 64-66 64-71 71-72 66 68-70 69-72 68-72 68 68-72 70-74 75-77 69-77 68-71 71-77 68 68-70 69-73 73-76

4 Main 7 Main

Cleveland Modified Windsor

Mazda VB OHC SOHC

SOHC

Cleveland Windsor

Cleveland Modified Windsor

72-74 62 62-67 63-64 65-67 65-67 63-64 63-67 68-91 70-74 79 69-79 64-67 64-71 71-78 64-68 68-69 69-73 72-78

FORD FORD MODEL INDEX (Cont’d.) Model E SUPER DUTY

E-100 ECONOLINE

E-100 ECONOLINE CLUB WAGON

E-150 ECONOLINE

E-150 ECONOLINE CLUB WAGON

E-150 ECONOLINE SUPER

E-150 ECONOLINE SUPER WAGON

E-200 ECONOLINE

E-200 ECONOLINE CHATEAU WAGON E-200 ECONOLINE CLUB WAGON

E-200 ECONOLINE CUSTOM WAGON E-250 ECONOLINE

E-250 ECONOLINE CLUB WAGON

CID

Liter

Description

Years

300 415 330 351 445 460 170 240 300 302 351 351 460

4.9 6.8 5.4 5.8 7.3 7.5 2.8 3.9 4.9 5.0 5.8 5.8 7.5

96 97-02 SOHC 97-02 Windsor 96 Powerstroke Engine 96-02 96 68-71 68-74 72-83 68-83 Modified 75-82 Windsor 75-83 78

170 240 300 302 351 351 300 256 281 302 330 351 351 420 460

2.8 3.9 4.9 5.0 5.8 5.8 4.9 4.2 4.6 5.0 5.4 5.8 5.8 6.9 7.5

68-70 68-74 74-82 68-82 75-82 75-82 75-96 97-03 97-05 75-96 97-05 75-82 75-96 84 76-80

300 256 281 302 330 351 351 460

4.9 4.2 4.6 5.0 5.4 5.8 5.8 7.5

300 302 351 351 460

4.9 5.0 5.8 Modified 5.8 Windsor 7.5

77-91 79-91 77-82 77-91 79

300 302 351 351 170 240 300 302

4.9 5.0 5.8 Modified 5.8 Windsor 2.8 3.9 4.9 5.0

78-82 79-82 78-82 78-82 68-71 68-74 72-74 68-74

240 302

3.9 5.0

71-72 71-72

170 240 300 302

2.8 3.9 4.9 5.0

68-70 68-74 74 68-74

240 302 300 415 256 281 302 330 351 351 400 460

3.9 5.0 4.9 6.8 4.2 4.6 5.0 5.4 5.8 5.8 6.6 7.5

71-72 71-72 75-96 97 97-03 97-05 75-93 97-05 75-82 75-96 80 75-96

300 302 351 351

4.9 5.0 5.8 Modified 5.8 Windsor

Modified Windsor OHV SOHC SOHC Modified Windsor

OHV SOHC SOHC Modified Windsor

75-96 97-98 97-98 79-96 97-98 75-82 75-96 76-79

Model E-250 ECONOLINE CLUB WAGON

E-250 ECONOLINE HD E-250 ECONOLINE SUPER

E-250 ECONOLINE SUPER WAGON

E-300 ECONOLINE

E-300 ECONOLINE CHATEAU WAGON E-300 ECONOLINE CLUB WAGON

E-300 ECONOLINE CUSTOM WAGON E-350 ECONOLINE

E-350 ECONOLINE HD CLUB WAGON

E-350 ECONOLINE SUPER

E-350 ECONOLINE SUPER WAGON

77-91 79-80 75-82 75-91

164

CID

Liter

Description

Years

400 420 445 460

6.6 6.9 7.3 7.5

80-82 83-87 88-91 75-91

300 351

4.9 5.8 Windsor

91 91

300 415 256 281 302 330 351 351 400 460

4.9 6.8 4.2 4.6 5.0 5.4 5.8 5.8 6.6 7.5

78-96 97 97-98 98 79-91 97-98 77-82 77-96 80 78-96

300 302 351 351 400 420 460 170 240 300 302

4.9 5.0 5.8 Modified 5.8 Windsor 6.6 6.9 7.5 2.8 3.9 4.9 5.0

78-84 79-80 78-81 78-84 80 83-84 78-84 69-70 68-73 72-74 68-74

240 302

3.9 5.0

71-72 71-72

170 240 300 302

2.8 3.9 4.9 5.0

69-70 68-74 72 68-74

240 302 300 415 302 330 351 351 400 420 445 445 460

3.9 5.0 4.9 6.8 5.0 5.4 5.8 5.8 6.6 6.9 7.3 7.3 7.5

71-72 71-72 75-96 97-05 75-82 SOHC 97-05 Modified 75-82 Windsor 75-96 80-82 83-87 88-94 Powerstroke Engine 95-03 75-96

300 415 330 351 445 445 460

4.9 6.8 5.4 SOHC 5.8 Windsor 7.3 7.3 Powerstroke Engine 7.5

300 415 302 330 351 351 400 420 445 445 460

4.9 6.8 5.0 5.4 5.8 5.8 6.6 6.9 7.3 7.3 7.5

300 415 302 330 351

4.9 6.8 5.0 5.4 SOHC 5.8 Modified

OHV SOHC SOHC Modified Windsor

92-96 97-98 97-98 92-96 92-94 95-98 92-96

78-96 97-98 79-80 SOHC 97-99 Modified 78-82 Windsor 78-96 80-82 83-87 88-94 Powerstroke Engine 95-98 78-96 78-96 97-98 79-80 97-99 78-82

FORD FORD MODEL INDEX (Cont’d.) Model E-350 ECONOLINE SUPER WAGON

E-350 SUPER DUTY CHATEAU E-350 SUPER DUTY XL E-350 SUPER DUTY XLT E-450 ECONOLINE ECONOLINE ELITE

ESCAPE ESCAPE - XLS ESCAPE - XLT ESCORT ESCORT - GL ESCORT - GLX ESCORT - GT ESCORT - L ESCORT - LX

ESCORT - LX-E ESCORT - PONY ESCORT - SPORT EXCURSION EXP EXP - LUXURY EXP - SPORTY EXPEDITION EXPLORER

EXPLORER - SPORT EXPLORER SPORT TRAC F-100 PICKUP

F-100 PICKUP SUPER CAB

CID

Liter

Description

Years

351 400 420 445 445 460

5.8 Windsor 6.6 6.9 7.3 7.3 Powerstroke Engine 7.5

78-96 80-82 83-87 88-94 95-98 78-96

415

6.8

415

6.8

415 415 330 445 144 170 240 351 351 400 460 122 140 182 140 140 98 116 122 98 116 122 98 98 112 116 98 116 122 98 116 122 122 112 116 116 122 415 330 445 98 116 116 116 281 330 245 245 281 302 245

6.8 6.8 5.4 7.3 2.4 2.8 3.9 5.8 5.8 6.6 7.5 2.0 2.3 3.0 2.3 2.3 1.6 1.9 2.0 1.6 1.9 2.0 1.6 1.6 1.8 1.9 1.6 1.9 2.0 1.6 1.9 2.0 2.0 1.8 1.9 1.9 2.0 6.8 5.4 7.3 1.6 1.9 1.9 1.9 4.6 5.4 4.0 4.0 4.6 5.0 4.0

06 03-05 SOHC 03-05 Powerstroke Engine 03 61-66 62-67 67 Modified 75-76 Windsor 75-76 75-76 75-76 DOHC (Zetec) 01-04 Duratec 05 Duratec 01-05 Duratec 06 Duratec 06 OHC 81-82 SOHC 93-96 SOHC 97-02 OHC 83-85 SOHC 85-88 Mazda RF 84-87 OHC 83 OHC 83-85 Mazda BP DOHC 91-96 SOHC 86-90 OHC 83-85 SOHC 85-86 Mazda RF 84-86 OHC 85 SOHC 86-96 Mazda RF 86 SOHC 97-98 Mazda BP DOHC 92-93 SOHC 87-92 SOHC 93-95 SOHC 97-98 00-05 SOHC 00-05 Powerstroke Engine 00-03 OHC 82-85 SOHC 86 SOHC 87-88 SOHC 87 SOHC 97-04 SOHC 97-05 OHV 91-00 SOHC 97-03 SOHC 02-05 96-01 SOHC 01-03

245 240 300 232 255 302 351 351 352 360 390 400 460

4.0 3.9 4.9 3.8 4.2 5.0 5.8 5.8 5.8 5.9 6.4 6.6 7.5

SOHC

300

4.9

Model F-100 PICKUP SUPER CAB F-150 - FX4 F-150 - KING RANCH F-150 - LARIAT F-150 - STX F-150 - XL

1989

1598 1989 1598 1989 1598 1598 1598 1989 1598 1989 1989

1989

1598

OHV Modified Windsor

01-03 65-75 65-83 82-83 81-82 69-83 77-81 77-81 66-67 68-76 68-76 77-79 73-79 77-79

F-150 - XLT F-150 PICKUP

F-150 PICKUP HARLEY-DAVIDSON EDITION F-150 PICKUP HERITAGE F-150 PICKUP LIGHTNING F-150 PICKUP SUPER CAB

F-250 PICKUP

F-250 PICKUP SUPER CAB

F-250 SUPER DUTY KING RANCH F-250 SUPER DUTY LARIAT

165

CID

Liter

Description Modified Windsor

Years

351 351 400 330 330 330 256 281 256 281 330 256 281 330 240 300 256 281 302 330 351 351 360 390 400 420 460

5.8 5.8 6.6 5.4 5.4 5.4 4.2 4.6 4.2 4.6 5.4 4.2 4.6 5.4 3.9 4.9 4.2 4.6 5.0 5.4 5.8 5.8 5.9 6.4 6.6 6.9 7.5

330

5.4 SOHC

01-03

256 281

4.2 OHV 4.6 SOHC

04 04

330 351

5.4 SOHC 5.8 Windsor

99-03 93-95

300 256 281 302 330 351 351 400 460 240 300 256 281 302 330 351 351 352 360 390 400 420 445 445 460

4.9 4.2 4.6 5.0 5.4 5.8 5.8 6.6 7.5 3.9 4.9 4.2 4.6 5.0 5.4 5.8 5.8 5.8 5.9 6.4 6.6 6.9 7.3 7.3 7.5

300 256 281 302 330 351 351 400 420 445 445 460

4.9 4.2 4.6 5.0 5.4 5.8 5.8 6.6 6.9 7.3 7.3 7.5

415

6.8

415

6.8

SOHC SOHC SOHC OHV SOHC OHV SOHC SOHC OHV SOHC SOHC OHV SOHC SOHC Modified Windsor

77-79 77-79 77-78 05 05 05 05-06 05 05-06 05 05 05-06 05 05 75 75-96 97-03 97-04 75-96 97-04 77-82 77-96 75-76 75-76 77-79 84 75-79

77-96 97 97-98 77-96 SOHC 97 Modified 77-82 Windsor 77-96 77-79 77-79 65-74 65-96 OHV 98 SOHC 97-99 72-96 SOHC 97-99 Modified 77-82 Windsor 77-97 66-67 68-76 68-76 77-82 83-87 88-94 Powerstroke Engine 93-97 73-97 OHV SOHC

77-96 97 97-99 77-96 SOHC 97 Modified 77-82 Windsor 77-97 77-82 83-87 88-94 Powerstroke Engine 93-97 77-97 OHV SOHC

FORD FORD MODEL INDEX (Cont’d.) Model F-250 SUPER DUTY XL F-250 SUPER DUTY XLT F-250 SUPER DUTY PICKUP F-350 PICKUP

F-350 PICKUP SUPER CAB

F-350 SUPER DUTY KING RANCH F-350 SUPER DUTY LARIAT F-350 SUPER DUTY XL F-350 SUPER DUTY XLT F-350 SUPER DUTY PICKUP F-450 SUPER DUTY LARIAT F-450 SUPER DUTY XL F-450 SUPER DUTY XLT F-450 SUPER DUTY PICKUP

F-500 PICKUP F-550 SUPER DUTY LARIAT F-550 SUPER DUTY XL F-550 SUPER DUTY XLT F-550 SUPER DUTY PICKUP F53 STRIPPED CHASSIS F59 STRIPPED CHASSIS FAIRLANE

CID

Liter

Description

Years

Model FAIRLANE

415

6.8

415

6.8

415 330 445 240 300 302 351 351 352 360 361 390 400 420 445 445 460

6.8 5.4 7.3 3.9 4.9 5.0 5.8 5.8 5.8 5.9 5.9 6.4 6.6 6.9 7.3 7.3 7.5

300 302 351 351 400 445 445 460

4.9 5.0 5.8 Modified 5.8 Windsor 6.6 7.3 7.3 Powerstroke Engine 7.5

99-05 SOHC 99-05 Powerstroke Engine 99-03 65-74 65-96 72-80 Modified 77-82 Windsor 77-97 66-67 68-76 64-65 68-76 77-82 83-87 88-94 Powerstroke Engine 93-97 73-97 79-80 79-80 77-80 77-97 77-80 88-94 93-97 77-97

415

6.8

415

6.8

415

6.8

415

6.8

415 330 445

6.8 99-05 5.4 SOHC 99-05 7.3 Powerstroke Engine 99-03

415

6.8

05-06

415

6.8

05-06

415

6.8

05-06

415 445 445 460 330 360 390

6.8 7.3 7.3 Powerstroke Engine 7.5 5.4 5.9 6.4

99-04 90-94 95-03 90-97 75-77 75-77 75-77

415

6.8

05-06

415

6.8

05-06

415

6.8

05-06

415 445

6.8 99-04 7.3 Powerstroke Engine 99-03

460

7.5

88-97

445 445 170 200 250 221 260 289 302 351

7.3 7.3 Powerstroke Engine 2.8 3.3 7 Main 4.1 3.6 4.3 4.7 5.0 5.8 Windsor

88-94 93-96 63-66 65-68 69 62-63 62-64 64-68 68-69 69

FAIRLANE - 500

FAIRMONT

FAIRMONT - FUTURA

FALCON

FALCON - FUTURA

FALCON SEDAN DELIVERY

FESTIVA - GL FESTIVA - L FESTIVA - L PLUS FESTIVA - LX FIESTA FOCUS - LE FOCUS - LX FOCUS - S2 FOCUS - SE FOCUS - STREET FOCUS - SVT FOCUS - ZTS FOCUS - ZTW FOCUS - ZX3 FOCUS - ZX4 FOCUS - ZX4 ST FOCUS - ZX5 FOCUS - ZXW FORD 300 FREESTAR FREESTAR - LIMITED FREESTAR - SEL FUSION - S FUSION - SE FUSION - SEL GALAXIE

166

CID

Liter

390 427 428 200 250 289 302 351 351 390 427 428 429 140 200 255 302 140 200 255 302 144 170 200 200 250 260 289 302 170 200 250 289 302

6.4 7.0 7.0 3.3 4.1 4.7 5.0 5.8 5.8 6.4 7.0 7.0 7.0 2.3 3.3 4.2 5.0 2.3 3.3 4.2 5.0 2.4 2.8 3.3 3.3 4.1 4.3 4.7 5.0 2.8 3.3 4.1 4.7 5.0

144 170 200 200 260 289

2.4 2.8 3.3 3.3 4.3 4.7 1.3 1.3 1.3 1.3 1.6 2.0 2.0 2.3 2.0 2.0 2.0 2.3 2.0 2.0 2.0 2.3 2.0 2.3 2.0 2.0 2.3 2.0 2.3 2.0 2.0 2.3 2.0 3.3 4.3 4.7 4.2 4.2 4.2 2.3 2.3 2.3 3.3 3.9

98 122 122 140 121 121 122 140 121 122 121 140 121 140 121 121 140 121 140 121 121 140 121 200 260 289 256 256 256 140 140 140 200 240

1295 1295 1295 1295 1598 1989 1989 1989 1989 1989 1989 1989 1989 1989 1989

1989

Description

7 Main

Cleveland Windsor

OHC 7 Main OHC 7 Main

4 Main 7 Main

7 Main

4 Main 7 Main Mazda B3 Mazda B3 Mazda B3 Mazda B3 OHV (Fiesta) SOHC SOHC Duratec DOHC (Zetec) DOHC (Zetec) SOHC Duratec DOHC (Zetec) DOHC (Zetec) DOHC (Zetec) Duratec DOHC (Zetec) Duratec Duratec DOHC (Zetec) Duratec Duratec Duratec Duratec DOHC (Zetec) Duratec Duratec 4 Main OHV OHV OHV Duratec Duratec Duratec 4 Main

Years 64-69 64-69 68-69 68 69-70 68 68-70 70 69-70 68-69 69 68 70 78-82 78-82 80-82 78-79 78-83 78-83 80-82 78-79 60-64 60-69 63-64 65-70 70 63-64 64-68 68-70 69 68-70 70 68 68-70 61-64 61-65 64 65 63-64 65 91-93 88-93 90 88-92 78-80 00 00-04 03-04 01-02 03 00-04 03-04 01-02 02-04 00-04 03-04 02-03 03-04 05-06 00-04 03-04 05-06 05-06 05-06 02-04 03-04 05-06 63 63 63 04-05 06 06 06 06 06 63 65-67

FORD FORD MODEL INDEX (Contâ&#x20AC;&#x2122;d.) Model GALAXIE

CID

Liter

260 289 352 390 427 428 240 302 351 351 390 400 427 428 429 460 302 351 351 390 428 429 250 302 351 351 351 400 429 460

4.3 4.7 5.8 6.4 7.0 7.0 3.9 5.0 5.8 5.8 6.4 6.6 7.0 7.0 7.0 7.5 5.0 5.8 5.8 6.4 7.0 7.0 4.1 5.0 5.8 5.8 5.8 6.6 7.0 7.5

302 351 351 351 400 460 GRAN TORINO - ELITE 250 351 351 400 460 GRAN TORINO SPORT 302 351 351 351 400 429 460 GRAN TORINO SQUIRE 302 351 351 351 400 429 460 GRANADA 140 200 250 232 255 302 351 351 GRANADA - GHIA 200 250 302 351 351 LTD 140 200 232 255 289 302 351 351

5.0 5.8 5.8 5.8 6.6 7.5 4.1 5.8 5.8 6.6 7.5

GALAXIE 500

GALAXIE 500 - XL

GRAN TORINO

GRAN TORINO BROUGHAM

Description

Cleveland Windsor

Cleveland Modified Windsor

Cleveland Windsor

Years 64 63-67 64-66 64-67 65-67 66-67 68-72 68-72 70-74 69-74 68-71 71-74 68 68-69 69-73 73-74 68-70 70 69-70 68-70 68-69 69-70 72-74 72-74 72-74 75-76 72-76 72-76 72-73 74-76 74 74 75-76 74-76 74-76 74-76 74 74 74 74 74

5.0 5.8 Cleveland 5.8 Modified 5.8 Windsor 6.6 7.0 7.5

72-74 72-74 75 72-75 72-75 72-73 74-75

5.0 5.8 5.8 5.8 6.6 7.0 7.5 2.3 3.3 4.1 3.8 4.2 5.0 5.8 5.8 3.3 4.1 5.0 5.8 5.8 2.3 3.3 3.8 4.2 4.7 5.0 5.8 5.8

72-74 72-74 75-76 72-76 72-76 72-73 74-76 81-82 75-82 75-80 82 80-81 75-80 75-77 75-77 77 75-77 75-77 75-77 75-77 83-86 83 83-86 81-82 67-68 68-85 70-74 75-82

Cleveland Modified Windsor

OHC 7 Main OHV Modified Windsor 7 Main Modified Windsor OHC 7 Main OHV

Cleveland Modified

Model LTD

LTD - BROUGHAM

LTD - COUNTRY SQUIRE LTD - CROWN VICTORIA

CID

Liter

Description Windsor

Years

5.8 6.4 6.6 7.0 7.0 7.0 7.5 2.3 3.3 3.8 5.0 5.8 5.8 5.8 6.4 6.6 7.0 7.5

302 351 351

5.0 5.8 Modified 5.8 Windsor

80-86 80-81 80-86

4.2 5.0 5.8 5.8 5.0 5.8 5.8 6.6 7.5 5.0 4.2 5.0 5.8 5.8 5.0 5.8 5.8 6.6 5.0 5.8 5.8 6.6 5.0 5.8 5.8 6.6 5.8 5.8 6.6 5.9 6.4 5.9 2.8 3.3 4.1 5.0 2.3 2.8 3.3 3.3 4.1 2.8 3.8 4.2 4.3 4.7 5.0 5.8 5.8 6.4 7.0 7.0 7.0 5.8 5.8 7.0

81-82 80-86 80-82 80-86 77-79 75-79 75-79 75-78 75-78 85 81-82 80-82 80-82 80-82 77-79 77-79 77-79 77-78 77 77 77 77 77-79 77-79 77-79 77-78 77 77 77 73 71-73 74 70-72 70-77 70-77 71-77 79-84 64-65 64 65-82 69-73 79 83-04 80-82 64 64-68 68-84 70-73 69-73 67-69 68 68-70 70-71 71 71 69

255 302 351 351 LTD - LANDAU 302 351 351 400 460 LTD - LX 302 LTD - S 255 302 351 351 LTD II 302 351 351 400 LTD II - BROUGHAM 302 351 351 400 LTD II - S 302 351 351 400 LTD II - SQUIRE 351 351 400 M-400 360 390 M-450 360 MAVERICK 170 200 250 302 MUSTANG 140 170 200 200 250 171 232 255 260 289 302 351 351 390 427 428 429 MUSTANG - BOSS 351 351 351 MUSTANG - BOSS 429 429

167

351 390 400 427 428 429 460 140 200 232 302 351 351 351 390 400 429 460

OHC 7 Main OHV Cleveland Modified Windsor

Modified Windsor Modified Windsor

Modified Windsor Modified Windsor Modified Windsor Modified Windsor Modified Windsor

7 Main OHC 4 Main 7 Main OHV

Cleveland Windsor

69-82 65-71 71-78 65-68 67-69 69-73 72-78 83-86 83 83-86 71-85 71-74 75-76 71-76 71 71-76 71-73 72-76

FORD FORD MODEL INDEX (Cont’d.) Model MUSTANG - BULLITT MUSTANG - COBRA MUSTANG - COBRA R MUSTANG - COBRA SVT MUSTANG - GHIA

MUSTANG - GRANDE

MUSTANG - GT MUSTANG - GTS MUSTANG - L MUSTANG - LX MUSTANG - MACH I

MUSTANG - SVO MUSTANG II

MUSTANG II - 2+2 MUSTANG II - GHIA

MUSTANG II - MACH I P-100 P-350

P-400 P-500 PINTO

PROBE PROBE - GL PROBE - GT PROBE - LX PROBE - SE RANCH WAGON

CID

Liter

Description

Years

281 281 302 351

4.6 SOHC 4.6 DOHC 5.0 5.8 Windsor

01 96-04 93-94 95

302 140 200 171 255 302 200 250 302 351 351 428 429 140 281 302 302 140 232 302 140 232 302 250 302 351 351 428 429 140 122 140 171 302 122 140 171 122 140 171 302 140 171 302 170 240 300 302 360 390 400 300 400 300 400 98 122 140 171 122 133 133 152

5.0 2.3 3.3 2.8 4.2 5.0 3.3 4.1 5.0 5.8 5.8 7.0 7.0 2.3 4.6 5.0 5.0 2.3 3.8 5.0 2.3 3.8 5.0 4.1 5.0 5.8 5.8 7.0 7.0 2.3 2.0 2.3 2.8 5.0 2.0 2.3 2.8 2.0 2.3 2.8 5.0 2.3 2.8 5.0 2.8 3.9 4.9 5.0 5.9 6.4 6.6 4.9 6.6 4.9 6.6 1.6 2.0 2.3 2.8 2.0 2.2 2.2 2.5

95 79-82 79-81 79 80-81 79 70 70-73 70-73 70-73 70-73 70 70-71 84 96-04 84-95 95 84 84 84 85-93 85-86 85-93 71 70-73 70-73 70-73 70 70-71 84-86 74 74-78 74-78 75-78 74 74 74 74 74-78 74-78 75-78 74 74-78 75-78 65-67 68-72 68-76 72-76 73 72-73 76 75-76 75-76 75-77 75-77 71-73 71-74 74-80 75-79 97 89-92 89-92 93-97

133 182 122 144 170 200 200 240 260 289

1989

1989 1989

1598 1989 1989 2450

1989

OHC 7 Main

7 Main Cleveland Windsor OHC SOHC OHC OHV OHC OHV

Cleveland Windsor OHC OHC (Pinto) OHC OHC (Pinto) OHC OHC (Pinto) OHC OHC

OHV (Kent / Pinto) OHC (Pinto) OHC

Mazda FS DOHC Mazda F2 Mazda F2 Mazda KL (24V DOHC) 2.2 Mazda F2 3.0 OHV (Vulcan) 2.0 Mazda FS DOHC 2.4 2.8 3.3 4 Main 3.3 7 Main 3.9 4.3 4.7

89 90-92 93-96 62 62-67 63 66-67 65-69 63-64 63-68

Model RANCH WAGON

RANCH WAGON POLICE CRUISER RANCHERO

RANCHERO - 500

RANCHERO - GT

RANCHERO - SQUIRE

RANGER

RANGER - EDGE RANGER - SPORT RANGER - STX RANGER - SUPER

RANGER - XL RANGER - XLT SPRINT SUNLINER

168

CID

Liter

Description

Years

302 351 351 352 390 400 427 428 429 460

5.0 5.8 Cleveland 5.8 Windsor 5.8 6.4 6.6 7.0 7.0 7.0 7.5

68-72 70-74 69-74 64-66 64-71 71-76 64-66 68-69 69-73 73-74

428 144 170 200 200 250 260 289 302 351 351 390 428 429 250 302 351 351 351 400 429 460 250 302 351 351 351 390 400 428 429 460 250 302 351 351 351 400 429 460 122 134 140 140 140 153 171 177 182 245 245 182 140 182 182 140 153 177 182 245 140 182 140 182 170 221 260 200

7.0 2.4 2.8 3.3 3.3 4.1 4.3 4.7 5.0 5.8 5.8 6.4 7.0 7.0 4.1 5.0 5.8 5.8 5.8 6.6 7.0 7.5 4.1 5.0 5.8 5.8 5.8 6.4 6.6 7.0 7.0 7.5 4.1 5.0 5.8 5.8 5.8 6.6 7.0 7.5 2.0 2.2 2.3 2.3 2.3 2.5 2.8 2.9 3.0 4.0 4.0 3.0 2.3 3.0 3.0 2.3 2.5 2.9 3.0 4.0 2.3 3.0 2.3 3.0 2.8 3.6 4.3 3.3

70 60-64 61-65 64 65-68 69-71 63-64 65-67 68-71 70-71 69-71 67-69 68-69 70-71 70-73 70-79 70-74 75-79 70-79 72-78 70-73 74-77 71-72 68-79 70-74 75-79 69-79 68-69 72-78 69 70-73 74-77 70-73 70-79 70-74 75-79 70-79 72-78 70-73 74-76 83-88 83-84 01-04 85-87 83-97 98-01 83-85 86-92 91-04 90-00 01-03 05 06 06 06 86-97 98 86-92 91-98 90-98 05-06 05-06 05-06 05-06 63 63 63-64 63

1989

4 Main 7 Main

Cleveland Windsor

Cleveland Modified Windsor

OHC Mazda S2 Duratec Mits 4D55 OHC SOHC OHV (Vulcan) OHV SOHC OHV (Vulcan) Duratec OHV (Vulcan) OHV (Vulcan) OHC SOHC OHV (Vulcan) OHV Duratec OHV (Vulcan) Duratec OHV (Vulcan)

4 Main

FORD FORD MODEL INDEX (Cont’d.) Model SUNLINER

TAURUS TAURUS - G TAURUS - GL

TAURUS - L TAURUS - LX

TAURUS - MT5 TAURUS - SE TAURUS - SEL TAURUS - SHO TEMPO TEMPO - GL TEMPO - GLS TEMPO - GLX TEMPO - L TEMPO - LX TEMPO - SPORT THUNDERBIRD

Type and Location

CID

260 289 352 390 153 182 182 182 153 182 182 232 153 182 232 153 182 182 232 153 182 182 182 232 182 182 182 195 140 122 140 182 140 182 122 140 122 140 122 140 182 140 140 200 232 255 302 351 351 390 400 427 428 429

1989

1989 1989 1989

Standard Shaft Size

Liter 4.3 4.7 5.8 6.4 2.5 3.0 3.0 3.0 2.5 3.0 3.0 3.8 2.5 3.0 3.8 2.5 3.0 3.0 3.8 2.5 3.0 3.0 3.0 3.8 3.0 3.0 3.0 3.2 2.3 2.0 2.3 3.0 2.3 3.0 2.0 2.3 2.0 2.3 2.0 2.3 3.0 2.3 2.3 3.3 3.8 4.2 5.0 5.8 5.8 6.4 6.6 7.0 7.0 7.0

Description

OHV (HSC) Duratec OHV (Vulcan) OHV (Vulcan) OHV (HSC) Duratec OHV (Vulcan) OHV OHV (HSC) OHV (Vulcan) OHV OHV (HSC) Duratec OHV (Vulcan) OHV OHV (HSC) OHV (Vulcan) Duratec OHV (Vulcan) OHV Duratec OHV (Vulcan) SHO (DOHC) SHO (DOHC) OHV (HSC) Mazda RF OHV (HSC) OHV (Vulcan) OHV (HSC) OHV (Vulcan) Mazda RF OHV (HSC) Mazda RF OHV (HSC) Mazda RF OHV (HSC) OHV (Vulcan) OHV (HSC) OHC 7 Main OHV Modified Windsor

Max. Bearing Thickness

Housing Bore

Years 64 63 64 64 86 99-05 86-05 96-97 87-90 96-98 87-98 88-95 87-90 87-92 88-92 87 96-98 87-95 88-95 87-88 87-88 06 95-06 95 06 06 89-95 93-95 87-91 84-86 84-94 92-94 91 92 84-85 84-85 84-85 84-91 86 86-94 92-94 87-90 83-88 80-82 82-92 80-82 77-92 77-79 77-79 64-68 72-78 64-67 66-67 68-73

Model

THUNDERBIRD - SC THUNDERBIRD SPORT

Vertical Oil Clearance

Max. Overall Length

VIN CYL

Bore x Stroke

1295cc (1.3) Mazda B3 1295cc (1.3) Mazda B3 112 (1.8) Mazda BP DOHC

H K 8

71mm x 83.6mm 71mm x 83.6mm 83mm x 85mm

Material Code

1989

Qty. Set

Liter

Description

Years

7.5 3.8 OHV 4.6 SOHC 5.0 3.8 OHV

72-76 87-97 94-97 87-93 89-95

2.3 5.0 3.3 4.1 4.7 5.0 5.8 5.8 5.8 6.4 6.6 7.0 7.0 7.5 4.1 5.0 5.8 5.8 7.0 5.0 5.8 5.8 7.0 7.0 7.0 4.7 5.0 5.8 5.8 6.4 7.0 7.0 4.1 5.0 5.8 5.8 6.4 7.0

87-88 87-88 68 69-74 68 68-74 70-74 75-76 69-76 68-69 72-76 69 70-73 73-76 71 71 71 71 71 70-71 70-71 70-71 70-71 69 70-71 68 68-71 70-71 69-71 68-69 68-69 70-71 69 69-71 70-71 69-71 69 70-71

7.0 3.3 4.3 4.7 5.8 6.4 3.0 3.8 2.0

OHC 7 Main

Cleveland Modified Windsor

Cleveland Windsor Cleveland Windsor

Cleveland Windsor

70-71 63 63-64 63 64 64 95-00 95-03 98-03

4 Main

OHV (Vulcan) OHV DOHC (Zetec)

Bearing Shell No.

Engine Set No. Sizes Available

TORQUE SETTINGS

Connecting Rod 25-29 ft.lbs/34-39 Nm 1.3L engine Main Bearing 40-44 ft.lbs/54-59 Nm Connecting Rod 37-40 ft.lbs/50-54 Nm 1.8L engine

Rod - 1.3L engine only. 39.939/1.5724 39.954/1.5730

43.000/1.6929 43.019/1.6937

1.509/0.0594 .028/.0011 .079/.0031

17.00/0.669

Rod - 1.8L engines only. 44.940/1.7693 44.956/1.7699

47.996/1.8896 48.016/1.8904

1.510/0.0594 .020/.0008 .071/.0028

17.00/0.669

169

460 232 281 302 232

140 302 TORINO 200 250 289 302 351 351 351 390 400 428 429 460 TORINO - 500 250 302 351 351 429 TORINO - BROUGHAM 302 351 351 429 TORINO - COBRA 428 429 TORINO - GT 289 302 351 351 390 428 429 TORINO - SQUIRE 250 302 351 351 390 429 TORINO - SUPER COBRA JET 429 VICTORIA 200 260 289 352 390 WINDSTAR 182 232 ZX2 121

ENGINE

L4 L4 L4

CID

THUNDERBIRD THUNDERBIRD - LX

F820

F810

4B8331

8331AL IH

Std. .25 .50 .75 1.0

8351A IH

Std. .25 .50 .75 1.0

4B8351

FORD Engine Set No. Sizes Available

Type and Location

Max. Overall Length

Material Code

Qty. Set

Bearing Shell No.

2.010/0.0791 .022/.0009 .076/.0030

17.50/0.689

F810

8354A U

2.013/0.0793 .022/.0009 .076/.0030

17.50/0.689

F810

8353A L

57.100/2.2480 68.830/2.7098 (Nominal I.D.) (Nominal O.D.) Note: Set includes two pieces, use on No.4 position. Required with 5M8353 main set.

2.55/0.100

F250

8353T IH

Housing Bore

49.938/1.9661 49.956/1.9668

53.998/2.1259 54.018/2.1267

49.938/1.9661 49.956/1.9668

53.998/2.1259 54.018/2.1267

Max. Bearing Thickness

Vertical Oil Clearance

(Contâ&#x20AC;&#x2122;d.) 5M8353

Main 1-5

Std. .25 .50 .75 1.0 1-5

1T8353 Std.

Standard Shaft Size

Thrust 4

ENGINE

VIN CYL

1297cc (1.3) Courier Van (HCS) 1297cc (1.3) Escort (HCS) 1297cc (1.3) Fiesta (HCS) 1297cc (1.3) Ka (HCS)

L4 L4 L4 L4

Bore x Stroke

TORQUE SETTINGS

73.96mm x 75.48mm 73.96mm x 75.48mm 73.96mm x 75.48mm 73.96mm x 75.48mm

Rod

4B1810 Std. .25 .50 .75 1.0

5M1815

Main 1-5

Std. .25 .50 .75 1.0

40.990/1.6138 41.010/1.6146

43.990/1.7319 44.010/1.7327

1.485/0.0585 .010/.0004 .076/.0030

18.00/0.709

F780

1810 IH

56.990/2.2437 57.000/2.2441

60.623/2.3867 60.636/2.3872

1.805/0.0711 .013/.0005 .062/.0024

18.50/0.728

F780

1815 U/L

2.85/0.112

F250

1649T U

Thrust

1T1649 Std.

63.600/2.5039 77.850/3.0650 63.850/2.5138 78.100/3.0748 Note : Set contains two pieces. Required with 5M1815 main set.

ENGINE

VIN CYL

1558cc (1.6) Escort & Cortina Lotus (Twin Cam)

Bore x Stroke

TORQUE SETTINGS

82.5mm x 72.8mm

Rod

4B603P

49.200/1.9370 49.212/1.9375

22.35/0.880

F780

5216 IH

25.53/1.005

F780

2152+015 IH

25.53/1.005

F780

2152 IH

59.436/2.3400 74.498/2.9330 2.36/0.093 59.690/2.3500 74.752/2.9430 Note: Set includes two pieces, use on No. 3 position. Required with 5M742P/5M2152+015 main set.

F250

Std. +.005

2152T IH

10C5808

Cam Tower - Split cam type insert 25.400/1.0000 28.587/1.1255 25.412/1.0005 28.800/1.1339

Std. 10 20 30 40

52.896/2.0825 52.908/2.0830

1.835/0.0722 .015/.0006 .064/.0025

Main - .015" oversize OD version of 5M742P. 1-5 53.988/2.1255 58.064/2.2860 2.027/0.0798 .013/.0005 Std. 10 20 30 40 54.000/2.1260 58.077/2.2865 .056/.0022

5M2152+015

5M742P

Main 1-5

Std. 10 20 30 40

1T113S

Std.

53.988/2.1255 54.000/2.1260

1.840/0.0724 .013/.0005 .056/.0022

Thrust 3

25.400/1.0000 25.412/1.0005

57.683/2.2710 57.696/2.2715

ENGINE

28.587/1.1255 28.600/1.1260

VIN CYL

98 1598cc (1.6) OHV (Fiesta)

1.584/0.0624 .007/.0003 .048/.0019

19.18/0.755

F23

5808 IH

1.584/0.0624 .007/.0003 .048/.0019

12.82/0.505

F23

5809 IH

Bore x Stroke 3.19 x 3.06

TORQUE SETTINGS Connecting Rod 30-35 ft.lbs/41-47 Nm Main Bearing 55-60 ft.lbs/75-81 Nm

Rod

4B603P Std. 10 20 30 40

49.200/1.9370 49.212/1.9375

52.896/2.0825 52.908/2.0830

1.835/0.0722 .015/.0006 .064/.0025

170

22.35/0.880

F780

5216 IH

FORD Type and Location

Standard Shaft Size

Max. Bearing Thickness

Housing Bore

Vertical Oil Clearance

Max. Overall Length

Material Code

Qty. Set

Bearing Shell No.

Engine Set No. Sizes Available

(Contâ&#x20AC;&#x2122;d.) Main 1,5 2,3,4

57.683/2.2710 57.696/2.2715

1.836/0.0723 .015/.0006 .074/.0029

22.53/0.887

F780

MB2758AL

53.988/2.1255 54.000/2.1260

57.683/2.2710 57.696/2.2715

1.836/0.0723 .015/.0006 .074/.0029

25.53/1.005

F780

MB2759AL

2.36/0.093

F250

2152T IH

Std. +.005

3C711S

59.436/2.3400 74.498/2.9330 59.690/2.3500 74.752/2.9430 Note: Thrust set includes two pieces. Use on No. 3 position. Required with 5M1455AL. Cam 1 2 3

5M1455AL

53.988/2.1255 54.000/2.1260

Thrust 3

Std. 10 20

39.616/1.5597 39.637/1.5605

42.888/1.6885 42.913/1.6895

1.610/0.0633

20.19/0.795

F23

F-28-1

39.616/1.5597 39.637/1.5605 39.616/1.5597 39.637/1.5605

42.888/1.6885 42.913/1.6895 42.888/1.6885 42.913/1.6895

1.610/0.0633

17.53/0.690

F23

F-28-2

1.610/0.0633

20.19/0.795

F23

F-28-3

ENGINE

1T113S

Std.

VIN CYL

98 1598cc (1.6) OHV (Kent / Pinto) W

Bore x Stroke 3.19 x 3.06

TORQUE SETTINGS

Connecting Rod 30-35 ft.lbs/41-47 Nm Main Bearing 55-60 ft.lbs/75-81 Nm

Rod 49.200/1.9370 49.212/1.9375

52.896/2.0825 52.908/2.0830

1.835/0.0722 .015/.0006 .064/.0025

Main - .015" oversize OD version of 5M742P. 53.988/2.1255 58.064/2.2860 2.027/0.0798 .013/.0005 1-5 54.000/2.1260 58.077/2.2865 .056/.0022 Main 1-5

53.988/2.1255 54.000/2.1260

57.683/2.2710 57.696/2.2715

1.840/0.0724 .013/.0005 .056/.0022

22.35/0.880

25.53/1.005

Thrust 3

59.436/2.3400 74.498/2.9330 2.36/0.093 59.690/2.3500 74.752/2.9430 Note: Set includes two pieces, use on No. 3 position. Required with 5M742P/5M2152+015 main set. Cam 1

F780

F250

Std. 10 20 30 40

2152+015 IH

Std. 10 20 30 40

2152 IH

Std. 10 20 30 40

2152T IH

Std. +.005

3C711S

39.616/1.5597 39.637/1.5605

42.888/1.6885 42.913/1.6895

1.610/0.0633

20.19/0.795

F23

F-28-1

39.616/1.5597 39.637/1.5605

42.888/1.6885 42.913/1.6895

1.610/0.0633

17.53/0.690

F23

F-28-2

39.616/1.5597 39.637/1.5605

42.888/1.6885 42.913/1.6895

1.610/0.0633

20.19/0.795

F23

F-28-3

26.67/1.050

F100

RB902

45.072/1.7745 45.099/1.7755

5M2152+015

5M742P

1T113S

Std.

Small End - not bored - single pieces. 20.625/0.8120 22.327/0.8790 20.632/0.8123 22.352/0.8800 AR Auxiliary 41.953/1.6517 Front 41.978/1.6527

4B603P

5216 IH

RB902 Semi

1.571/0.0619 .014/.0006 .081/.0032

ENGINE

VIN CYL

Bore x Stroke

98 1598cc (1.6) OHC 98 1598cc (1.6) OHC 98 1598cc (1.6) OHC 98 1598cc (1.6) OHC 98 1598cc (1.6) OHC Turbo

2 4 5 7 8

3.156 x 3.125 3.156 x 3.125 3.156 x 3.125 3.156 x 3.125 3.156 x 3.125

L4 L4 L4 L4 L4

12.95/0.510

F23

FG-29

1C1094S Std.

TORQUE SETTINGS

Connecting Rod 19-25 ft.lbs/26-34 Nm Main Bearing 67-80 ft.lbs/91-108 Nm

Rod 47.889/1.8854 47.909/1.8862

50.889/2.0035 50.909/2.0043

1.487/0.0585 .006/.0002 .072/.0028

171

19.35/0.762

F780

5226 IH

4B1276P Std. 10 20 30

FORD Engine Set No. Sizes Available

Type and Location

Max. Overall Length

Material Code

Qty. Set

Bearing Shell No.

2.138/0.0842 .010/.0004 .069/.0027

22.45/0.884

F780

5227 IH

57.981/2.2827 62.286/2.4522 2.138/0.0842 .010/.0004 58.001/2.2835 62.300/2.4528 .069/.0027 Overflange length remains constant for standard and undersizes.

28.73/1.131

F780

5228 U

Standard Shaft Size

Housing Bore

57.981/2.2827 58.001/2.2835

62.286/2.4522 62.300/2.4528

Max. Bearing Thickness

Vertical Oil Clearance

(Contâ&#x20AC;&#x2122;d.) 5M1557P

Main 1-5

Std. 10 20 30 3 (Fl)

ENGINE

VIN CYL

110 (1.8) Mazda VB 110 (1.8) Mazda VB 110 (1.8) Mazda VB 122 (2.0) Mazda MA

A C 1

L4 L4 L4 L4

Bore x Stroke 78mm x 94mm 78mm x 94mm 78mm x 94mm 80mm x 98mm

TORQUE SETTINGS Connecting Rod 30 ft.lbs/41 Nm (1972-74 engines only)

Connecting Rod 31 ft.lbs/42 Nm (1975-82 engines only)

Main Bearing 60 ft.lbs/81 Nm (1972-74 engines only) Main Bearing 63 ft.lbs/85 Nm (1975-82 engines only) Rod

4B1626 Std. .25 .50 .75 1.0

5M1627

Main 1,2,4

Std. .25 .50 .75 1.0 3,5

2T4162 Std.

3C8276

1.510/0.0594 .028/.0011 .071/.0028

21.97/0.865

F820

1626AL IH

62.939/2.4779 62.954/2.4785 62.939/2.4779 62.954/2.4785

67.010/2.6382 67.018/2.6385 67.010/2.6382 67.018/2.6385

2.007/0.0790 .030/.0012 .071/.0028 2.007/0.0790 .030/.0012 .071/.0028

18.00/0.709

F820

24.00/0.945

F820

1627AL IH 1628AL U/L

4162T U/L

69.850/2.7500 85.470/3.3650 2.03/0.080 70.010/2.7563 85.725/3.3750 Note - Set includes four pieces, use on No. 5 position. Required with 5M1627 main set.

Cam 1 2,3

Semi

56.002/2.2048 56.017/2.2054

Thrust 5

Std.

RB4017

52.941/2.0843 52.954/2.0848

44.945/1.7695 44.961/1.7701

49.009/1.9295 49.032/1.9304

2.014/0.0793 .020/.0008 .076/.0030

24.00/0.945

F23

8276 IH

44.945/1.7695 44.961/1.7701

49.009/1.9295 49.032/1.9304

2.014/0.0793 .020/.0008 .076/.0030

18.00/0.709

F23

8277 U/L

28.07/1.105

F100

RB4017

Small End - not bored - single pieces. 22.000/0.8661 25.000/0.9843 (Nominal) (Nominal)

ENGINE

VIN CYL

Bore x Stroke

116 (1.9) SOHC 116 (1.9) SOHC

9 J

3.23 x 3.46 3.23 x 3.46

L4 L4

TORQUE SETTINGS Connecting Rod 19-25 ft.lbs/20-34 Nm (1985-88 engines)

Connecting Rod 26-30 ft.lbs/35-40 Nm (1989-96 engines)

Main Bearing 67-80 ft.lbs/90-108 Nm

4B1276P Std. 10 20 30

4B1380A Std. .25 .50

4B1380P Std. .25 .50 .75 1.0

5M1706P

Rod - 1985-86 engines (1.8862" journal). 47.889/1.8854 50.889/2.0035 1.487/0.0585 .006/.0002 47.909/1.8862 50.909/2.0043 .072/.0028

19.35/0.762

F780

5226 IH

Rod - High Strength Aluminum Silicon material. 43.888/1.7279 46.888/1.8460 1.488/0.0586 .025/.0010 43.909/1.7287 46.909/1.8468 .071/.0028

19.50/0.768

F810

5231A IH

Rod - 1987-96 engines (1.7287" journal). To be superceded by 4B1380A when stock exhausted. 43.888/1.7279 46.888/1.8460 1.488/0.0586 .025/.0010 19.50/0.768 F780 8 43.909/1.7287 46.909/1.8468 .071/.0028 Main 1-5

Std. .25 .50 .75

57.980/2.2827 58.000/2.2835

62.286/2.4522 62.300/2.4528

2.128/0.0838 .030/.0012 .089/.0035

1,2,4,5

57.980/2.2827 62.286/2.4522 2.128/0.0838 58.000/2.2835 62.300/2.4528 3(Fl) 57.980/2.2827 62.286/2.4522 2.128/0.0838 58.000/2.2835 62.300/2.4528 Overflange length remains constant for standards and undersizes.

172

.030/.0012 .089/.0035 .030/.0012 .089/.0035

5231 IH

21.45/0.844

F780

5235 L

22.45/0.884

F780

28.73/1.131

F780

5236 U 5237 U

FORD Type and Location

Standard Shaft Size

Max. Bearing Thickness

Housing Bore

Vertical Oil Clearance

Max. Overall Length

Material Code

Qty. Set

Bearing Shell No.

Engine Set No. Sizes Available

(Contâ&#x20AC;&#x2122;d.) Cam Tower - OHC Repair Bush Set. 48.349/1.9035 1

1.277/0.0503

23.50/0.925

F23

FA-1-1

2 3

48.222/1.8985 48.095/1.8935

1.214/0.0478 1.151/0.0453

23.50/0.925 23.50/0.925

F23 F23

1 1

FA-1-2 FA-1-3

47.968/1.8885

1.087/0.0428

23.50/0.925

F23

FA-1-4

47.841/1.8835

1.024/0.0403

23.50/0.925

F23

FA-1-5

5C6003S Std.

ENGINE

VIN CYL

Bore x Stroke

122 1989cc (2.0) OHC (Pinto)

3.58 x 3.03

TORQUE SETTINGS

Connecting Rod 29-34 ft.lbs/39-46 Nm Main Bearing 65-75 ft.lbs/88-102 Nm

Rod 51.990/2.0468 52.000/2.0472

55.000/2.1654 55.020/2.1661

1.490/0.0589 .008/.0003 .064/.0025

20.00/0.787

56.980/2.2433 57.000/2.2441

60.620/2.3866 60.640/2.3874

1.810/0.0713 .010/.0004 .066/.0026

23.57/0.928

63.600/2.5039 80.240/3.1590 63.850/2.5138 80.500/3.1693 Note : Set includes four pieces, use on No.3 position. Required with 5M1084P main set.

2.35/0.093

Main 1-5 Thrust 3

Cam 1

F780

F250

4B943P

5220 IH

Std. .25 .50 .75 1.0

5221 IH

Std. .25 .50 .75 1.0

5M1084P

2167T U/L

2T218S

3C733S

41.990/1.6531 42.010/1.6539

45.085/1.7750 45.110/1.7760

1.520/0.0600

20.07/0.790

F23

F-29-1

44.610/1.7563 44.630/1.7571

47.700/1.8780 47.725/1.8790

1.520/0.0600

17.02/0.670

F23

F-29-2

44.990/1.7712 45.010/1.7720

48.082/1.8930 48.108/1.8940

1.520/0.0600

16.00/0.630

F23

F-29-3A

AR Auxiliary 41.953/1.6517 Front 41.978/1.6527

45.072/1.7745 45.099/1.7755

1.571/0.0619 .014/.0006 .081/.0032

12.95/0.510

F23

FG-29

Std.

ENGINE

VIN CYL

Bore x Stroke

122 1989cc (2.0) Mazda FS DOHC

83mm x 92mm

1C1094S Std.

TORQUE SETTINGS

Connecting Rod 16-20 ft.lbs/22-27 Nm + 82-97 deg. Main Bearing 13-16 ft.lbs/18-22 Nm + 85-95 deg.

Rod

Main 1-5

47.940/1.8874 47.955/1.8880

51.000/2.0079 51.015/2.0085

1.510/0.0594 .025/.0010 .071/.0028

17.00/0.669

55.937/2.2022 55.955/2.2029

60.000/2.3622 60.015/2.3628

2.010/0.0791 .025/.0010 .074/.0029

17.50/0.689

Thrust 4

62.000/2.4409 81.350/3.2027 62.250/2.4508 81.600/3.2126 Note : Set includes 2 pieces, use on No. 4 position. Required with 5M8302 main set.

2.55/0.100

ENGINE

VIN CYL

Bore x Stroke

122 1989cc (2.0) SOHC

3.338 x 3.464

F780

F817

4B8300

8300 IH

Std. .25 .50 .75 1.0

8302 U/L

Std. .25 .50 .75

8302T IH

TORQUE SETTINGS

5M8302

1T8302 Std.

Connecting Rod 26-30 ft.lbs/35-41 Nm Main Bearing 66-79 ft.lbs/89-107 Nm

Rod - High Strength Aluminum Silicon material. 43.888/1.7279 46.888/1.8460 1.488/0.0586 .025/.0010 43.909/1.7287 46.909/1.8468 .071/.0028

19.50/0.768

Rod - To be superceded by 4B1380A when stock exhausted. 43.888/1.7279 46.888/1.8460 1.488/0.0586 .025/.0010 43.909/1.7287 46.909/1.8468 .071/.0028

19.50/0.768

173

F780

F810

F780

4B1380A

5231A IH

Std. .25 .50

5231 IH

Std. .25 .50 .75 1.0

4B1380P

FORD Engine Set No. Sizes Available

Type and Location

Max. Overall Length

Material Code

Qty. Set

Bearing Shell No.

2.128/0.0838 .030/.0012 .089/.0035

21.45/0.844

F780

5235 L

2.128/0.0838 .030/.0012 .089/.0035

22.45/0.884

F780

5236 U

57.980/2.2827 62.286/2.4522 2.128/0.0838 .030/.0012 58.000/2.2835 62.300/2.4528 .089/.0035 Overflange length remains constant for standard and undersizes.

28.73/1.131

F780

5237 U

Standard Shaft Size

Housing Bore

57.980/2.2827 58.000/2.2835

62.286/2.4522 62.300/2.4528

57.980/2.2827 58.000/2.2835

62.286/2.4522 62.300/2.4528

Max. Bearing Thickness

Vertical Oil Clearance

11 (Contâ&#x20AC;&#x2122;d.) 5M1706P

Main 1-5

Std. .25 .50 .75 1,2,4,5 3(Fl)

ENGINE

VIN CYL

Bore x Stroke

122 1989cc (2.0) Mazda RF Diesel

86mm x 86mm

TORQUE SETTINGS Connecting Rod 51-54 ft.lbs/69-73 Nm Main Bearing 61-65 ft.lbs/83-88 Nm

Rod

4B2130

50.940/2.0055 50.955/2.0061

54.002/2.1261 54.017/2.1266

1.510/0.0594 .027/.0011 .083/.0033

21.13/0.832

F810

2130A IH

59.940/2.3598 59.960/2.3606

63.999/2.5196 64.019/2.5204

2.007/0.0790 .025/.0010 .091/.0036

19.13/0.753

F780

2134 IH

59.940/2.3598 59.960/2.3606

63.999/2.5196 64.019/2.5204

2.007/0.0790 .025/.0010 .091/.0036

21.13/0.832

F780

2135 IH

68.800/2.7087 84.250/3.3169 (Nominal I.D.) (Nominal O.D.) Note: Set includes four pieces, use on No.3 position. Required with 5M2134 main set.

2.05/0.081

F250

2134T U/L

26.75/1.053

F100

RB4077

Std. .25 .50 .75 1.0

5M2134

Main 1,2,4,5

Std. .25 .50 .75 1.0 3

2T2134 Std.

RB4077 Semi

Thrust 3

Small End - not bored, single pieces. 24.987/0.9837 28.013/1.1029 25.000/0.9843 28.033/1.1037

ENGINE

VIN CYL

Bore x Stroke

122 1989cc (2.0) OHC 140 (2.3) OHC 140 (2.3) OHC 140 (2.3) OHC 140 (2.3) OHC 140 (2.3) OHC 140 (2.3) OHC Turbo 140 (2.3) OHC Turbo 140 (2.3) OHC

C 2 6 A B M T W Y

3.52 x 3.13 3.78 x 3.13 3.78 x 3.13 3.78 x 3.13 3.78 x 3.13 3.78 x 3.13 3.78 x 3.13 3.78 x 3.13 3.78 x 3.13

L4 L4 L4 L4 L4 L4 L4 L4 L4

TORQUE SETTINGS Connecting Rod 30-36 ft.lbs/40-48 Nm Main Bearing 80-90 ft.lbs/108-122 Nm

Rod

4B984P Std. 10 20 30

51.981/2.0465 51.999/2.0472

55.169/2.1720 55.189/2.1728

1.580/0.0624 .012/.0005 .076/.0030

Main - for 1974-90 single spark plug engines only, full groove. 1,2,4,5 60.914/2.3982 65.791/2.5902 2.428/0.0956 .012/.0005 Std. 10 20 30 40 60.935/2.3990 65.811/2.5910 .078/.0031 3 (Fl) 60.914/2.3982 65.791/2.5902 2.428/0.0956 .012/.0005 60.935/2.3990 65.811/2.5910 .078/.0031 Overflange length remains constant for standard and undersizes.

5M1117P

Main - 1989-97 dual spark plug engines. 1-5 56.010/2.2051 60.886/2.3971 2.428/0.0956 Std. .25 .50 .75 1.0 56.030/2.2059 60.907/2.3979 1,2,4,5 56.010/2.2051 60.886/2.3971 2.428/0.0956 56.030/2.2059 60.907/2.3979 3 (Fl) 56.010/2.2051 60.886/2.3971 2.428/0.0956 56.030/2.2059 60.907/2.3979 Overflange length remains constant for standard and undersizes.

5M1743P

174

.020/.0008 .066/.0026 .020/.0008 .066/.0026 .020/.0008 .066/.0026

20.32/0.800

F780

2186 IH

24.13/0.950

F780

30.35/1.195

F780

2185 U/L 2187 U/L

24.13/0.950

F780

24.13/0.950

F780

30.33/1.194

F780

1753 L 1753 U 1754 U

FORD Type and Location

Standard Shaft Size

Max. Bearing Thickness

Housing Bore

Vertical Oil Clearance

Max. Overall Length

Material Code

Qty. Set

Bearing Shell No.

Engine Set No. Sizes Available

(Contâ&#x20AC;&#x2122;d.) Main - Alt set to 5M1743P with +0.010" overflange length increase. * See dimensional information below. 56.010/2.2051 60.886/2.3971 2.553/0.1005 .020/.0008 24.13/0.950 F780 5 1-5 56.030/2.2059 60.907/2.3979 (@ 0.25 mm u/s) .066/.0026 1,2,4,5

56.010/2.2051 56.030/2.2059

1753 L

60.886/2.3971 2.553/0.1005 .020/.0008 60.907/2.3979 (@ 0.25 mm u/s) .066/.0026

24.13/0.950

F780

1753 U

56.010/2.2051 60.886/2.3971 2.553/0.1005 .020/.0008 56.030/2.2059 60.907/2.3979 (@ 0.25 mm u/s) .066/.0026 To be discontinued when stock exhausted.

30.58/1.204

F780

7194 U

3 (Fl)

5M7194P .25 .50 .75

* DIMENSIONAL INFORMATION FOR 5M7194P Overall Width (Nominal) Increase in Width 0.25 mm u/s shaft 1.204" +0.010" 0.50 mm u/s shaft 1.204" +0.010" 0.75 mm u/s shaft 1.204" +0.010" Cam - Special oil control bearing - differs from OEM design. 360 OD groove. 44.990/1.7713 48.275/1.9006 1.620/0.0638 17.73/0.698 1-4 45.010/1.7720 48.300/1.9016 Cam 1-4

F-34-1B

48.275/1.9006 48.300/1.9016

1.620/0.0638

AR Auxiliary 41.960/1.6520 1 41.986/1.6530

45.644/1.7970 45.670/1.7980

1.810/0.0712

12.83/0.505

F23

AGB-34-1

45.136/1.7770 45.160/1.7780

1.550/0.0612

12.83/0.505

F23

AGB-34-2

41.960/1.6520 41.986/1.6530

F-34-1

4C777S

2C1095S Std.

VIN CYL

Bore x Stroke

121 1989cc (2.0) DOHC (Zetec) 121 1989cc (2.0) DOHC (Zetec) 122 1989cc (2.0) DOHC (Zetec) 122 1989cc (2.0) DOHC (Zetec)

3 Z 5 B

84.8mm x 87.9mm 84.8mm x 87.9mm 84.8mm x 87.9mm 84.8mm x 87.9mm

L4 L4 L4 L4

TORQUE SETTINGS

20.10/0.791

Rod - .002" oversize OD version of 4B4135A. 46.890/1.8461 49.940/1.9661 1.625/0.0640 .030/.0012 46.910/1.8468 49.960/1.9669 (@ 0.25mm u/size) .086/.0034

20.10/0.791

Main - High Strength Aluminum Silicon material. 57.980/2.2827 62.287/2.4522 2.131/0.0839 .025/.0010 1,2,4,5 58.000/2.2835 62.300/2.4528 .074/.0029

19.21/0.756

3 (Fl)

24.68/0.972

2.131/0.0839 .025/.0010 .074/.0029

ENGINE

VIN CYL

Bore x Stroke

121 (2.0) Duratec

84.8mm x 87.9mm

Connecting Rod 16-19 ft.lbs + 90 deg Main Bearing 13-16 ft.lbs + 90 deg

Rod - High Strength Aluminum Silicon material. 46.890/1.8461 49.890/1.9642 1.475/0.0581 .030/.0012 46.910/1.8468 49.910/1.9650 .086/.0034

62.287/2.4522 62.300/2.4528

F23

Std.

ENGINE

57.980/2.2827 58.000/2.2835

4C777BS Std.

44.990/1.7713 45.010/1.7720

17.73/0.698

F23

F810

F810 F810

9 1

4135A IH 9062A IH 7193A U/L

4B4135A Std. .25 .50 .75

4B4135AO/S2 .25 .50 .75

5M7193A Std. .25 .50 .75

7195A U

TORQUE SETTINGS

Rod

Main 1,2,4,5 3 (Fl)

46.980/1.8496 47.000/1.8504

50.025/1.9695 50.045/1.9703

1.505/0.0593 .015/.0006 .075/.0030

16.25/0.640

51.980/2.0465 52.000/2.0472 51.980/2.0465 52.000/2.0472

57.019/2.2448 57.037/2.2455 57.019/2.2448 57.037/2.2455

2.520/0.0992 .015/.0006 .045/.0018 2.517/0.0991 .015/.0006 .045/.0018

19.09/0.752

175

25.75/1.014

F780

F810 F810

9 1

4390 IH 8173A U/L 8174A U

4B4390 Std. .25 .50

5M8174A Std. .25 .50 .75

FORD Engine Set No. Sizes Available

Type and Location

Standard Shaft Size

Housing Bore

Max. Bearing Thickness

Vertical Oil Clearance

ENGINE

VIN CYL

Bore x Stroke

133 (2.2) Mazda F2 133 (2.2) Mazda F2 Turbo

C L

86mm x 94mm 86mm x 94mm

L4 L4

Max. Overall Length

Material Code

Qty. Set

Bearing Shell No.

TORQUE SETTINGS Connecting Rod 48-51 ft.lbs/65-69 Nm Main Bearing 61-65 ft.lbs/83-88 Nm

Rod

4B2130

50.940/2.0055 50.955/2.0061

Std. .25 .50 .75 1.0

54.002/2.1261 54.017/2.1266

1.510/0.0594 .027/.0011 .083/.0033

21.13/0.832

F810

Main - half groove. Overflange width increases for undersizes.*See below for dimensional information. 1-5 59.939/2.3598 64.000/2.5197 2.014/0.0793 .017/.0007 19.13/0.753 F780 5 Std. .25 .50 .75 1.0 59.954/2.3604 64.018/2.5204 .071/.0028 1,2,4,5 59.939/2.3598 64.000/2.5197 2.014/0.0793 .017/.0007 19.13/0.753 F780 4 59.954/2.3604 64.018/2.5204 .071/.0028 3 (Fl) 59.939/2.3598 64.000/2.5197 2.014/0.0793 .017/.0007 27.99/1.102 F780 1 59.954/2.3604 64.018/2.5204 .071/.0028

5M8133

2130A IH 8133 L 8134 U 8135 U

ENGINE

VIN CYL

Bore x Stroke

134 (2.2) Mazda S2 Diesel

88.9mm x 89mm

TORQUE SETTINGS Connecting Rod 50-54 ft.lbs/68-73 Nm Main Bearing 80-85 ft.lbs/108-115 Nm

Rod

4B1750

52.987/2.0861 53.000/2.0866

56.683/2.2316 56.696/2.2321

1.833/0.0722 .021/.0008 .073/.0029

28.60/1.126

F780

1750 IH

64.987/2.5585 65.000/2.5591 64.987/2.5585 65.000/2.5591 64.987/2.5585 65.000/2.5591

68.987/2.7160 69.000/2.7165 68.987/2.7160 69.000/2.7165 68.987/2.7160 69.000/2.7165

1.983/0.0781 .021/.0008 .073/.0029 1.983/0.0781 .021/.0008 .073/.0029 1.983/0.0781 .021/.0008 .073/.0029

28.60/1.126

F780

28.60/1.126

F780

28.60/1.126

F780

1748 IH 1748 U 1749 L

73.500/2.8937 90.300/3.5551 2.33/0.092 (Nominal I.D.) (Nominal O.D.) Note: Thrust set includes four pieces, use on No. 3 position. Required with 5M1748 main set.

F250

1748T U/L

F100

RB4068

Std. .25 .50 .75 1.0

5M1748

Main 1,2,4,5

Std. .25 .50 .75 3 3

2T1748 Std.

RB4068 Semi

Thrust 3

Small End - not bored, single pieces. 28.000/1.1024 30.987/1.2200 (Nominal) 31.000/1.2205

1.830/0.0720

ENGINE

VIN CYL

Bore x Stroke

140 (2.3) OHV (HSC) 140 (2.3) OHV (HSC) 140 (2.3) OHV (HSC) 153 (2.5) OHV (HSC)

R S X D

3.78 x 3.13 3.78 x 3.13 3.78 x 3.13 3.78 x 3.58

4B1383P Std. 10 20 30

4B583P Std. 10 20 30

L4 L4 L4 L4

26.80/1.055

TORQUE SETTINGS Connecting Rod 21-26 ft.lbs/29-35 Nm Main Bearing 51-66 ft.lbs/69-90 Nm

Rod - 1986-94 engines only. 53.929/2.1232 56.871/2.2390 53.950/2.1240 56.891/2.2398

1.458/0.0574 .005/.0002 .071/.0028

20.57/0.810

F780

5240 IH

Rod - 1984-85 engines only. 53.934/2.1234 56.871/2.2390 53.945/2.1238 56.891/2.2398

1.458/0.0574 .010/.0004 .066/.0026

20.57/0.810

F780

2150 IH

176

FORD Type and Location

Standard Shaft Size

Max. Bearing Thickness

Housing Bore

Vertical Oil Clearance

Max. Overall Length

Material Code

Qty. Set

Bearing Shell No.

Engine Set No. Sizes Available

(Contâ&#x20AC;&#x2122;d.) Main 1 2,4,5

57.104/2.2482 57.125/2.2490

60.990/2.4012 61.011/2.4020

1.928/0.0759 .010/.0004 .071/.0028

25.90/1.020

57.109/2.2484 57.119/2.2488

60.995/2.4014 61.006/2.4018

1.928/0.0759 .020/.0008 .056/.0022

25.90/1.020

F780

2126 U

25.90/1.020

F780

32.28/1.271

F780

5224 L 2127 U

1-5

57.104/2.2482 60.990/2.4012 1.928/0.0759 57.125/2.2490 61.011/2.4020 3 (Fl) 57.104/2.2482 60.990/2.4012 1.928/0.0759 57.125/2.2490 61.011/2.4020 Overflange length remains constant for standard and undersizes.

.010/.0004 .071/.0028 .010/.0004 .076/.0030

F780

5223 U

Main - optional set to 5M1629P with +.004" overflange length increase for underizes. *See below for dimensional information. 57.104/2.2482 60.990/2.4012 1.928/0.0759 .010/.0004 25.90/1.020 F780 1 5223 1 57.125/2.2490 61.011/2.4020 .071/.0028 U 2,4,5

57.104/2.2482 57.125/2.2490

60.990/2.4012 61.011/2.4020

1.928/0.0759 .020/.0008 .056/.0022

25.90/1.020

F780

2126 U

57.104/2.2482 60.990/2.4012 57.125/2.2490 61.011/2.4020 3 (Fl) 57.104/2.2482 60.990/2.4012 57.125/2.2490 61.011/2.4020 to be discontinued when stock exhausted.

1.928/0.0759 .010/.0004 .071/.0028 1.928/0.0759 .010/.0004 .076/.0030

25.90/1.020

F780

32.39/1.275

F780

5224 L 5222 U

1-5

5M1629P Std. 10 20 30

5M5222P 20

* DIMENSIONAL INFORMATION FOR 5M5222P Overall Width (Nominal) Increase in Width .020" u/s shaft 1.275" +.004" Cam 1

50.988/2.0074 51.013/2.0084

55.988/2.2042 56.012/2.2052

2.470/0.0973

18.42/0.725

F23

F-46-1

2,3

50.988/2.0074 51.013/2.0084

55.588/2.1885 55.613/2.1895

2.270/0.0894

18.42/0.725

F23

F-46-2

50.988/2.0074 51.013/2.0084

55.988/2.2042 56.012/2.2052

2.470/0.0973

12.90/0.508

F23

F-46-3

4C1251S Std.

ENGINE

VIN CYL

Bore x Stroke

140 (2.3) Mits 4D55 Turbo Diesel

91mm x 90mm

TORQUE SETTINGS

Connecting Rod 32-35 ft.lbs/44-47 Nm Main Bearing 55-61 ft.lbs/74-83 Nm

Rod 52.973/2.0855 53.000/2.0866

56.007/2.2050 56.021/2.2055

1.493/0.0588 .021/.0008 .076/.0030

Main 1,2,4,5

22.959/0.9039 22.980/0.9047

.012/.0005 .078/.0031 .012/.0005 .078/.0031

25.13/0.989

F820

F780

30.95/1.219

F780

1136AL IH 1137 U/L 1138 IH

46.030/1.8122 46.050/1.8130

1.478/0.0582

20.24/0.797

F818

8288

26.000/1.0236 26.021/1.0244

1.505/0.0593

18.00/0.709

F818

8289

4B1136 Std. .25 .50 .75 1.0

5M1137 Std. .25 .50 .75 1.0

3BS8288 Std. .25

ENGINE

VIN CYL

Bore x Stroke

140 (2.3) Duratec 140 (2.3) Duratec

D Z

87.4mm x 94mm 87.4mm x 94mm

L4 L4

TORQUE SETTINGS

Connecting Rod 26 ft.lbs + 90 deg Main Bearing 63 ft.lbs (Tighten thrust position last)

Rod 49.980/1.9677 50.000/1.9685

53.025/2.0876 53.045/2.0884

1.500/0.0591 .026/.0010 .052/.0020

177

16.80/0.661

F810

8170A IH

4B8170A Std. .25 .50

FORD Engine Set No. Sizes Available

Type and Location

Standard Shaft Size

Housing Bore

Max. Bearing Thickness

Vertical Oil Clearance

Max. Overall Length

Material Code

Qty. Set

Bearing Shell No.

16.80/0.661

F810

9111A IH

19.09/0.752

F810

25.75/1.014

F810

8173A U/L 8174A U

20 (Contâ&#x20AC;&#x2122;d.) 4B8170AO/S2 .25 .50 .75

5M8174A

Rod - .002" oversize OD version of 4B8170A. 49.980/1.9677 53.076/2.0896 1.650/0.0650 .026/.0010 50.000/1.9685 53.096/2.0904 (@ 0.25mm u/s) .052/.0020 Main 1,2,4,5

Std. .25 .50 .75 3 (Fl)

51.980/2.0465 52.000/2.0472 51.980/2.0465 52.000/2.0472

ENGINE

57.019/2.2448 57.037/2.2455 57.019/2.2448 57.037/2.2455

VIN CYL

144 (2.4) 170 (2.8) 170 (2.8) 170 (2.8) 200 (3.3) 4 Main

F U

L6 L6 L6 L6 L6

2.520/0.0992 .015/.0006 .045/.0018 2.517/0.0991 .015/.0006 .045/.0018

Bore x Stroke 3.50 x 2.50 3.50 x 2.94 3.50 x 2.94 3.50 x 2.94 3.68 x 3.13

TORQUE SETTINGS Connecting Rod 19-24 ft.lbs/26-32 Nm Main Bearing 60-70 ft.lbs/81-95 Nm

Rod

6B583P Std. 10 20 30 40

4C703S

Cam 1

Std. 2 3 4

53.934/2.1234 53.945/2.1238

56.871/2.2390 56.891/2.2398

1.458/0.0574 .010/.0004 .067/.0026

20.57/0.810

F780

2150 IH

45.960/1.8095 45.985/1.8105

50.241/1.9780 50.267/1.9790

2.110/0.0832

18.42/0.725

F23

F-32-1

45.960/1.8095 45.985/1.8105 45.960/1.8095 45.985/1.8105 45.960/1.8095 45.985/1.8105

49.860/1.9630 49.886/1.9640 49.479/1.9480 49.505/1.9490 49.098/1.9330 49.124/1.9340

1.920/0.0757

18.42/0.725

F23

F-17-2

1.730/0.0682

18.42/0.725

F23

F-17-3

1.540/0.0607

18.42/0.725

F23

F-17-4

ENGINE

VIN CYL

Bore x Stroke

153 (2.5) SOHC

3.779 x 3.405

TORQUE SETTINGS Connecting Rod 26-30 ft.lbs/34-41 Nm Stage 1 Connecting Rod 31-36 ft.lbs/41-49 Nm Stage 2 Main Bearing 51-59 ft.lbs/68-81 Nm Stage 1 Main Bearing 76-84 ft.lbs/102-115 Nm Stage 2

Rod

4B984P

51.981/2.0465 51.999/2.0472

Std. 10 20 30

5M1743P Std. .25 .50 .75 1.0

5M7194P .25 .50 .75

55.169/2.1720 55.189/2.1728

1.580/0.0624 .012/.0005 .076/.0030

Main 1-5

56.010/2.2051 60.886/2.3971 2.428/0.0956 56.030/2.2059 60.907/2.3979 1,2,4,5 56.010/2.2051 60.886/2.3971 2.428/0.0956 56.030/2.2059 60.907/2.3979 3 (Fl) 56.010/2.2051 60.886/2.3971 2.428/0.0956 56.030/2.2059 60.907/2.3979 Overflange length remains constant for standard and undersizes.

.020/.0008 .066/.0026 .020/.0008 .066/.0026 .020/.0008 .066/.0026

20.32/0.800

F780

2186 IH

24.13/0.950

F780

24.13/0.950

F780

30.33/1.194

F780

1753 L 1753 U 1754 U

Main - Alt set to 5M7194P with +0.010" overflange length increase. * See dimensional information below. 56.010/2.2051 60.886/2.3971 2.553/0.1005 .020/.0008 24.13/0.950 F780 5 1-5 56.030/2.2059 60.907/2.3979 (@ 0.25 mm u/s) .066/.0026 1,2,4,5 56.010/2.2051 60.886/2.3971 2.553/0.1005 .020/.0008 24.13/0.950 F780 4 56.030/2.2059 60.907/2.3979 (@ 0.25 mm u/s) .066/.0026 3 (Fl) 56.010/2.2051 60.886/2.3971 2.553/0.1005 .020/.0008 30.58/1.204 F780 1 56.030/2.2059 60.907/2.3979 (@ 0.25 mm u/s) .066/.0026 to be discontinued when stock exhausted. * DIMENSIONAL INFORMATION FOR 5M7194P Overall Width (Nominal) Increase in Width 0.25 mm u/s shaft 1.204" +0.010" 0.50 mm u/s shaft 1.204" +0.010" 0.75 mm u/s shaft 1.204" +0.010"

178

1753 L 1753 U 7194 U

FORD Type and Location

Standard Shaft Size

Max. Bearing Thickness

Housing Bore

Vertical Oil Clearance

Max. Overall Length

Material Code

Qty. Set

Bearing Shell No.

Engine Set No. Sizes Available

(Contâ&#x20AC;&#x2122;d.) Cam - Special oil control bearing - differs from OEM design. 360 OD groove. 44.990/1.7713 48.275/1.9006 1.620/0.0638 17.73/0.698 1-4 45.010/1.7720 48.300/1.9016 Cam 1-4

44.990/1.7713 45.010/1.7720

48.275/1.9006 48.300/1.9016

ENGINE

1.620/0.0638

F-34-1B

4C777BS Std.

F23

F-34-1

4C777S Std.

VIN CYL

152 2450cc (2.5) Mazda KL (24V DOHC)

17.73/0.698

F23

Bore x Stroke

TORQUE SETTINGS

84.5mm x 74.2mm

Connecting Rod 16-20 ft.lbs/22-27 Nm + 82-97 deg Main Bearing 13-15 ft.lbs + 60 deg Bolt C Main Bearing 14-16 ft.lbs Bolt D Main Bearing 17-19 ft.lbs + 65-75 deg Bolt B Main Bearing 17-19 ft.lbs + 75-85 deg Bolt A

Rod

Main 1,2,3 4

52.935/2.0841 52.955/2.0848

56.000/2.2047 56.020/2.2055

1.511/0.0595 .023/.0009 .089/.0035

17.00/0.669

F780

61.930/2.4382 61.956/2.4392

67.000/2.6378 67.016/2.6384

2.505/0.0986 .034/.0013 .102/.0040

18.12/0.713

61.930/2.4382 61.956/2.4392

67.000/2.6378 67.016/2.6384

2.505/0.0986 .034/.0013 .102/.0040

22.12/0.871

F780

8148 U/L

2.05/0.081

F817

8352T U/L

F780

6B8350

8350 IH

Std. .25 .50 .75 1.0

8147 U/L

Std. .25 .50 .75

4M8147

Thrust 68.250/2.6870 79.750/3.1398 68.500/2.6968 80.000/3.1496 Set includes 4 pieces, use on No. 4 position. Required with 4M8147 main set.

ENGINE

VIN CYL

Bore x Stroke

155 2450cc (2.5) Duratec 155 2450cc (2.5) Duratec 182 (3.0) Duratec 182 (3.0) Duratec 182 (3.0) Duratec

G L 1 2 S

82.3mm x 79.5mm 82.3mm x 79.5mm 89mm x 79.5mm 89mm x 79.5mm 89mm x 79.5mm

V6 V6 V6 V6 V6

TORQUE SETTINGS

18.00/0.709

Rod - .002" oversize OD version of 6B4395A. 49.972/1.9674 53.066/2.0892 1.651/0.0650 .023/.0009 49.990/1.9681 53.086/2.0900 (@0.25mm u/s) .077/.0030

18.00/0.709

71.100/2.7992 71.350/2.8090

.020/.0008 .060/.0024 .020/.0008 .064/.0025

93.550/3.6831 93.800/3.6929

F810

4395A

6B4395A Std. .25 .50 .75

17.90/0.705 22.30/0.878

F810

F810 F810

6 1

1.95/0.077

Small End - not bored, single pieces. 21.011/0.8272 24.030/0.9461 21.013/0.8273 24.038/0.9464

Std.

Connecting Rod + 90 degrees Step 3 Connecting Rod 17 ft.lbs/23 Nm Step 1 Connecting Rod 32 ft.lbs/43 Nm Step 2 Main Bearing Consult Service Manual

Rod - High Strength Aluminum Silicon material. 49.972/1.9674 53.015/2.0872 1.501/0.0591 .023/.0009 49.990/1.9681 53.035/2.0880 .077/.0030

Main - High Strength Aluminum Silicon material. 1,2,3 62.969/2.4791 67.998/2.6771 2.502/0.0985 62.992/2.4800 68.020/2.6779 4 (Fl) 62.969/2.4791 67.998/2.6771 2.502/0.0985 62.992/2.4800 68.020/2.6779

2T8352

21.46/0.845

9082A IH 7262A U/L 7263A U/L

6B4395AO/S2 .25 .50 .75

4M7262A Std. .25 .50 .75

7263T

F100

RB4114

RB4114 Semi

ENGINE

VIN CYL

Bore x Stroke

171 (2.8) 171 (2.8)

S Z

3.66 x 2.71 3.66 x 2.71

V6 V6

TORQUE SETTINGS

Connecting Rod 21-25 ft.lbs/29-34 Nm Main Bearing 65-75 ft.lbs/88-102 Nm

Rod 53.980/2.1252 54.000/2.1260

56.820/2.2370 56.840/2.2378

1.410/0.0555 .012/.0005 .078/.0030

Rod - .002" oversize OD version of 6B723P. 53.980/2.1252 56.869/2.2390 1.559/0.0614 .005/.0002 54.000/2.1260 56.891/2.2400 (@ .010" u/s) .073/.0029

179

16.48/0.649

F780

1656 IH 9060 IH

6B723P Std. 10 20 30 40

6B723PO/S2 10 20 30 40

FORD Engine Set No. Sizes Available

Type and Location

Standard Shaft Size

Housing Bore

Max. Bearing Thickness

Vertical Oil Clearance

Max. Overall Length

Material Code

Qty. Set

Bearing Shell No.

21.59/0.850

F780

1657 IH

25 (Contâ&#x20AC;&#x2122;d.) Main - 171 engines 5/1/74 to 79 only. All straight main bearings. 56.980/2.2433 60.620/2.3866 1.800/0.0709 .014/.0006 1,2,3,4 Std. 10 20 30 40 57.000/2.2441 60.640/2.3873 .070/.0028

4M1346P

4M2351P 10 20 30 40

Main - optional set to 4M860P with +0.010" overflange length increase for undersizes. *See below for dimensional information. 56.980/2.2433 60.620/2.3866 1.800/0.0709 .014/.0006 21.59/0.850 F780 6 1657 1,2,4 57.000/2.2441 60.640/2.3873 .071/.0028 IH 3 (Fl)

56.980/2.2433 60.620/2.3866 57.000/2.2441 60.640/2.3873 to be discontinued when stock exhausted.

.010" u/s shaft .020" u/s shaft .030" u/s shaft .040" u/s shaft

4M2352P 20 30

1.800/0.0709 .014/.0006 .071/.0028

26.54/1.045

F780

1655 IH

* DIMENSIONAL INFORMATION FOR 4M2351P Overall Width (Nominal) Increase in Width 1.045" +0.010" 1.045" +0.010" 1.045" +0.010" 1.045" +0.010"

Main - optional set to 4M860P with +0.020" overflange length increase for undersizes. *See below for dimensional information. 56.980/2.2433 60.620/2.3866 1.800/0.0709 .014/.0006 21.59/0.850 F780 6 1657 1,2,4 57.000/2.2441 60.640/2.3873 .071/.0028 IH 3 (Fl) 56.980/2.2433 60.620/2.3866 1.800/0.0709 .014/.0006 26.80/1.055 F780 2 1659 57.000/2.2441 60.640/2.3873 .071/.0028 IH Stock not available from fee warehouses. * DIMENSIONAL INFORMATION FOR 4M2352P Overall Width (Nominal) Increase in Width .020" u/s shaft 1.055" +0.020" .030" u/s shaft 1.055" +0.020"

Main - 171 engines from 1974 to 5/1/74 and 1983-86. All engines with flanged main bearings. 56.980/2.2433 60.620/2.3866 1.800/0.0709 .014/.0006 21.59/0.850 F780 1,2,4 Std. 10 20 30 40 57.000/2.2441 60.640/2.3873 .071/.0028

4M860P

3 (Fl)

56.980/2.2433 60.620/2.3866 1.800/0.0709 .014/.0006 57.000/2.2441 60.640/2.3873 .071/.0028 Overflange length remains constant for standard and undersizes.

2T325S Std.

4C1002BS Std.

4C654S Std.

1657 IH

26.29/1.035

F780

1658 IH

63.855/2.5140 80.493/3.1690 2.35/0.093 (Nominal) (Nominal) Note: Thrust set includes four pieces, use on No. 3 position. Required with 4M1346P main set.

F250

2167T U

F-47-1

F-47-2B

F-47-3B

F-47-4

Thrust 3

Cam - 1983-86 engines only. (Position #2 & #3 cams have OD groove with one oil hole) 43.905/1.7285 47.025/1.8514 1.530/0.0603 19.95/0.785 F23 1 43.920/1.7292 47.060/1.8528 2 43.525/1.7135 46.645/1.8364 1.530/0.0603 17.90/0.705 F23 43.540/1.7142 46.680/1.8378 3 43.140/1.6985 46.265/1.8215 1.530/0.0603 17.90/0.705 F23 43.160/1.6992 46.300/1.8228 4 42.765/1.6835 45.885/1.8065 1.530/0.0603 15.25/0.600 F23 42.780/1.6842 45.920/1.8079 Cam - 1974-79 engines only. 41.897/1.6495 45.030/1.7728 1 41.923/1.6505 45.060/1.7740 2 41.516/1.6345 44.653/1.7580 41.542/1.6355 44.679/1.7590 3 41.135/1.6195 44.272/1.7430 41.160/1.6205 44.298/1.7440 4 40.755/1.6045 43.890/1.7280 40.780/1.6055 43.917/1.7290

1.530/0.0604

19.80/0.780

F23

F-31-1

1.530/0.0604

17.91/0.705

F23

F-31-2

1.530/0.0604

17.91/0.705

F23

F-31-3

1.530/0.0604

15.25/0.600

F23

F-31-4

180

FORD Type and Location

Standard Shaft Size

Max. Bearing Thickness

Housing Bore

Vertical Oil Clearance

ENGINE

VIN CYL

Bore x Stroke

177 (2.9)

3.66 x 2.83

Max. Overall Length

Material Code

Qty. Set

Bearing Shell No.

Engine Set No. Sizes Available

TORQUE SETTINGS

Connecting Rod 21-25 ft.lbs/29-34 Nm Main Bearing 65-75 ft.lbs/88-102 Nm

Rod 53.980/2.1252 54.000/2.1260

56.820/2.2370 56.840/2.2378

1.410/0.0555 .012/.0005 .078/.0030

16.48/0.649

F780

1656 IH

Rod - .002" oversize OD version of 6B723P. 53.980/2.1252 56.869/2.2390 1.559/0.0614 .005/.0002 54.000/2.1260 56.891/2.2400 (@ .010" u/s) .073/.0029

16.48/0.649

Main - 1990-92 truck engines. 56.980/2.2433 60.620/2.3866 1,2,4 57.000/2.2441 60.640/2.3874 Upper

1.806/0.0711 .015/.0006 .081/.0032

21.59/0.850

1,2,4 Lower

56.980/2.2433 57.000/2.2441

60.620/2.3866 60.640/2.3874

1.806/0.0711 .015/.0006 .081/.0032

21.59/0.850

F780

1663 L

3 (Fl)

56.980/2.2433 57.000/2.2441

60.620/2.3866 60.640/2.3874

1.806/0.0711 .015/.0006 .081/.0032

26.29/1.035

F780

1658 IH

F780

9060 IH 1657 U

56.980/2.2433 60.620/2.3866 57.000/2.2441 60.640/2.3873 to be discontinued when stock exhausted.

.010" u/s shaft .020" u/s shaft .030" u/s shaft .040" u/s shaft

1.800/0.0709 .014/.0006 .071/.0028

26.54/1.045

F780

56.980/2.2433 60.620/2.3866 57.000/2.2441 60.640/2.3873 Stock not available from fee warehouses.

6B723PO/S2 10 20 30 40

4M2006P Std. 10 20 30

4M2351P 10 20 30 40

1655 IH

* DIMENSIONAL INFORMATION FOR 4M2351P Overall Width (Nominal) Increase in Width 1.045" +0.010" 1.045" +0.010" 1.045" +0.010" 1.045" +0.010"

6B723P Std. 10 20 30 40

1.800/0.0709 .014/.0006 .071/.0028

26.80/1.055

F780

4M2352P 20 30

1659 IH

* DIMENSIONAL INFORMATION FOR 4M2352P Overall Width (Nominal) Increase in Width .020" u/s shaft 1.055" +0.020" .030" u/s shaft 1.055" +0.020" Main - 1987-90 car engines and 1986-89 truck engines. Flanged bearing thrust. 56.980/2.2433 60.620/2.3866 1.800/0.0709 .014/.0006 21.59/0.850 1,2,4 57.000/2.2441 60.640/2.3873 .071/.0028

F780

3 (Fl)

F780

56.980/2.2433 60.620/2.3866 1.800/0.0709 .014/.0006 57.000/2.2441 60.640/2.3873 .071/.0028 Overflange length remains constant for standard and undersizes.

26.29/1.035

Cam - Special Oil Control Cam Set - Position #2 & #3 cams have OD groove with one oil hole. 1 43.905/1.7285 47.025/1.8514 1.530/0.0603 19.95/0.785 F23 43.920/1.7292 47.060/1.8528 2 43.525/1.7135 46.645/1.8364 1.530/0.0603 17.90/0.705 F23 43.540/1.7142 46.680/1.8378

1657 IH

1658 IH

F-47-1

F-47-2B

4C1002BS Std.

43.140/1.6985 43.160/1.6992

46.265/1.8215 46.300/1.8228

1.530/0.0603

17.90/0.705

F23

F-47-3B

42.765/1.6835 42.780/1.6842

45.885/1.8065 45.920/1.8079

1.530/0.0603

15.25/0.600

F23

F-47-4

181

4M860P Std. 10 20 30 40

FORD Engine Set No. Sizes Available

Type and Location

Standard Shaft Size

Housing Bore

Max. Bearing Thickness

Vertical Oil Clearance

ENGINE

VIN CYL

Bore x Stroke

182 (3.0) OHV (Vulcan) 182 (3.0) OHV (Vulcan) 182 (3.0) OHV (Vulcan)

1 U V

3.50 x 3.15 3.50 x 3.15 3.50 x 3.15

V6 V6 V6

Max. Overall Length

Material Code

Qty. Set

Bearing Shell No.

TORQUE SETTINGS Connecting Rod 23-29 ft.lbs/31-39 Nm Main Bearing 63-69 ft.lbs/85-93 Nm

Rod

6B1385P Std. .25 .50 .75 1.0

4M1702P

Main 1,2

Std. .25 .50 .75

53.983/2.1253 54.003/2.1261

57.150/2.2500 57.170/2.2508

1.567/0.0617 .013/.0005 .079/.0031

19.25/0.758

F780

5230 IH

63.983/2.5190 64.003/2.5198

68.885/2.7120 68.905/2.7128

2.443/0.0962 .025/.0010 .058/.0023

18.69/0.736

F780

5232 U/L

25.65/1.010

F780

27.00/1.063

F780

5233 U/L 5234 U/L

3 (Fl)

63.983/2.5190 68.885/2.7120 2.435/0.0959 64.003/2.5198 68.903/2.7127 4 63.983/2.5190 68.885/2.7120 2.435/0.0959 64.003/2.5198 68.903/2.7127 Overflange length remains constant for standard and undersizes.

4M5219P .25 .50 .75

.013/.0005 .076/.0030 .025/.0010 .076/.0030

Main - optional set to 4M1702P with +0.004" overflange length increase for undersizes. *See below for dimensional information. 63.983/2.5190 68.885/2.7120 2.443/0.0962 .025/.0010 18.69/0.736 F780 4 5232 1,2 64.003/2.5198 68.905/2.7128 .058/.0023 U/L 3 (Fl)

63.983/2.5190 64.003/2.5198

68.885/2.7120 68.903/2.7127

2.435/0.0959 .013/.0005 .076/.0030

25.75/1.014

F780

5219 U/L

63.983/2.5190 68.885/2.7120 64.003/2.5198 68.903/2.7127 to be discontinued when stock exhausted.

2.435/0.0959 .025/.0010 .076/.0030

27.00/1.063

F780

5234 U/L

* DIMENSIONAL INFORMATION FOR 4M5219P Overall Width (Nominal) Increase in Width 0.25 mm u/s shaft 1.014" +0.004" 0.50 mm u/s shaft 1.014" +0.004" 0.75 mm u/s shaft 1.014" +0.004" Cam - has modified #4 position bearing. 1 51.000/2.0079 54.676/2.1526 1.830/0.0720 51.020/2.0087 54.727/2.1546 2,3 51.000/2.0079 54.176/2.1329 1.570/0.0618 51.020/2.0087 54.226/2.1349 4 51.000/2.0079 54.676/2.1526 1.830/0.0720 51.020/2.0087 54.727/2.1546

24.38/0.960

F23

F-48-1

13.77/0.542

F23

F-48-2

13.77/0.542

F23

F-48-4A

Cam - use 4C048AS when stock depleted. 51.000/2.0079 54.676/2.1526 1.830/0.0719 1 S/C by 4C048AS 51.020/2.0086 54.727/2.1546

24.38/0.960

F23

F-48-1

1.570/0.0620

13.77/0.542

F23

F-48-2

1.830/0.0719

13.77/0.542

F23

F-48-4

4C048AS Std.

4C048S

2,3 4

51.000/2.0079 51.020/2.0086 51.000/2.0079 51.020/2.0086

54.176/2.1329 54.226/2.1349 54.676/2.1526 54.727/2.1546

ENGINE

VIN CYL

Bore x Stroke

182 (3.0) SHO (DOHC) 195 (3.2) SHO (DOHC)

Y P

89mm x 80mm 91mm x 80mm

6B1435P Std. .25 .50 .75

V6 V6

TORQUE SETTINGS Connecting Rod 22-26 ft.lbs Step 1 Connecting Rod 33-36 ft.lbs Step 2 Main Bearing 36-51 ft.lbs Step 1 Main Bearing 58-64 ft.lbs Step 2

Rod - To be discontinued when stock exhausted. 52.037/2.0463 55.000/2.1653 1.494/0.0588 .023/.0009 52.060/2.0472 55.016/2.1660 .056/.0022

182

18.08/0.711

F780

CB1435P IH

FORD Type and Location

Standard Shaft Size

ENGINE 200 (3.3) 7 Main 200 (3.3) 7 Main 200 (3.3) 7 Main 200 (3.3) 7 Main

Max. Bearing Thickness

Housing Bore

VIN CYL B T X

L6 L6 L6 L6

Vertical Oil Clearance

Bore x Stroke

Max. Overall Length

Material Code

Qty. Set

Bearing Shell No.

Engine Set No. Sizes Available

TORQUE SETTINGS

Connecting Rod 19-24 ft.lbs/26-32 Nm Main Bearing 60-70 ft.lbs/81-95 Nm

3.68 x 3.13 3.68 x 3.13 3.68 x 3.13 3.68 x 3.13

Rod 53.934/2.1234 53.945/2.1238

56.871/2.2390 56.891/2.2398

1.458/0.0574 .010/.0004 .067/.0026

Main - half groove for 5/75-83 engines only. 1-4,6,7 57.109/2.2484 60.991/2.4012 1.928/0.0759 57.119/2.2488 61.011/2.4020 1-4,6,7 57.109/2.2484 60.991/2.4012 1.928/0.0759 57.119/2.2488 61.011/2.4020

.020/.0008 .057/.0022 .020/.0008 .057/.0022

20.57/0.810

25.90/1.020

F780

2150 IH 2126 U 5224 L

25.90/1.020

F780

1.928/0.0759 .010/.0004 .077/.0030

32.28/1.271

F780

2127 U

5 (Fl)

57.104/2.2482 60.991/2.4012 1.928/0.0759 .010/.0004 57.125/2.2490 61.011/2.4020 .077/.0030 Overflange length remains constant for standard and undersizes.

32.28/1.271

F780

2125 L

Main - full groove for 65-5/75 engines only. 1-4,6,7 57.109/2.2484 60.995/2.4014 1.928/0.0759 .020/.0008 57.119/2.2488 61.006/2.4018 .057/.0022

25.90/1.020

F780

2126 IH

5 (Fl)

32.28/1.271

F780

2127 IH

5 (Fl)

57.104/2.2482 57.124/2.2490

60.991/2.4012 61.011/2.4020

57.109/2.2484 60.995/2.4014 1.928/0.0759 .020/.0008 57.119/2.2488 61.006/2.4018 .057/.0022 Overflange length remains constant for standard and undersizes. Cam 1 2 3 4

45.960/1.8095 45.985/1.8105

50.241/1.9780 50.267/1.9790

2.110/0.0832

18.42/0.725

F23

F-32-1

45.960/1.8095 45.985/1.8105 45.960/1.8095 45.985/1.8105

49.860/1.9630 49.886/1.9640 49.479/1.9480 49.505/1.9490

1.920/0.0757

18.42/0.725

F23

F-17-2

1.730/0.0682

18.42/0.725

F23

F-17-3

45.960/1.8095 45.985/1.8105

49.098/1.9330 49.124/1.9340

1.540/0.0607

18.42/0.725

F23

F-17-4

ENGINE 221 (3.6) 255 (4.2) 260 (4.3) 289 (4.7) 289 (4.7) 289 (4.7) 302 (5.0) 302 (5.0) 302 (5.0) 302 (5.0) 302 (5.0) 302 (5.0) 302 (5.0) 302 (5.0) 302 (5.0)

C N D E F G J M N P T

7M1389P Std. 10 20 30 40

7M771P Std. 10 20 30 40

4C703S Std.

VIN CYL D

6B583P Std. 10 20 30 40

V8 V8 V8 V8 V8 V8 V8 V8 V8 V8 V8 V8 V8 V8 V8

Bore x Stroke 3.50 x 2.87 3.68 x 3.00 3.80 x 2.87 4.00 x 2.87 4.00 x 2.87 4.00 x 2.87 4.00 x 3.00 4.00 x 3.00 4.00 x 3.00 4.00 x 3.00 4.00 x 3.00 4.00 x 3.00 4.00 x 3.00 4.00 x 3.00 4.00 x 3.00

TORQUE SETTINGS

Connecting Rod 19-24 ft.lbs/26-32 Nm Main Bearing 60-70 ft.lbs/81-95 Nm

Rod 53.919/2.1228 53.939/2.1236

56.871/2.2390 56.891/2.2398

1.458/0.0574 .016/.0006 .081/.0032

Rod - .002" oversize OD version of 8B634A. 53.919/2.1228 56.871/2.2390 1.610/0.0634 .016/.0006 53.939/2.1236 56.891/2.2398 (@ .010" u/s) .081/.0032

18.44/0.726

F810

2131A

8B634A Std. 01 10 20 30 40

18.44/0.726

F810

9030A IH

8B634AO/S2 10 20 30 40

Rod 53.919/2.1228 53.939/2.1236

56.871/2.2390 56.891/2.2398

1.458/0.0574 .016/.0006 .081/.0032

183

18.44/0.726

F780

2131 IH

8B634P Std. 01 10 20 30 40

FORD Engine Set No. Sizes Available

Type and Location

Standard Shaft Size

Housing Bore

Max. Bearing Thickness

Vertical Oil Clearance

Max. Overall Length

Material Code

Qty. Set

Bearing Shell No.

18.44/0.726

F780

9030 IH

30 (Contâ&#x20AC;&#x2122;d.) 8B634PO/S2 10 20 30 40

8B676P Std. 10 20 30

5M1666P 10 20 30 40

Rod - .002" oversize OD version of 8B634P. 53.919/2.1228 56.922/2.2410 1.610/0.0634 .017/.0007 53.939/2.1236 56.942/2.2418 (@ .010" u/s) .083/.0033

Rod - for 289 engines W/4V from 1963-64, 289 K engines from 1963-68 & 302 Boss & Eliminator engines 1969-71. 53.919/2.1228 56.870/2.2390 1.455/0.0573 .033/.0013 18.44/0.726 F780 16 CB676P 53.939/2.1236 56.890/2.2398 .099/.0039 Main - optional set to 5M590P with +0.020" overflange length increase for undersizes. *See below for dimensional information. 57.104/2.2482 62.006/2.4412 2.438/0.0960 .005/.0002 22.48/0.885 F780 8 2132 1,2,3,4 57.125/2.2490 62.027/2.4420 .073/.0029 U/L 3 (Fl)

57.104/2.2482 62.006/2.4412 57.125/2.2490 62.027/2.4420 Stock not available from fee warehouses.

.010" u/s shaft .020" u/s shaft .030" u/s shaft .040" u/s shaft

5M1746P 10 20 30 40

F780

2145 U/L

Main - optional set to 5M590P with +0.010" overflange length increase for undersizes. *See below for dimensional information. 57.104/2.2482 62.006/2.4412 2.438/0.0960 .005/.0002 22.48/0.885 F780 8 2132 1,2,4,5 57.125/2.2490 62.027/2.4420 .073/.0029 U/L 57.104/2.2482 62.006/2.4412 57.125/2.2490 62.027/2.4420 Stock not available from fee warehouses.

.010" u/s shaft .020" u/s shaft .030" u/s shaft .040" u/s shaft

10 20 30

29.28/1.153

* DIMENSIONAL INFORMATION FOR 5M1666P Overall Width (Nominal) Increase in Width 1.153" +0.020" 1.153" +0.020" 1.153" +0.020" 1.153" +.0.020"

3 (Fl)

5M2144P

2.438/0.0960 .005/.0002 .073/.0029

29.03/1.143

F780

2139 U/L

* DIMENSIONAL INFORMATION FOR 5M1746P Overall Width (Nominal) Increase in Width 1.143" +0.010" 1.143" +0.010" 1.143" +0.010" 1.143" +0.010"

Main - optional set to 5M590P with +0.004" overflange length increase for undersizes. *See below for dimensional information. 57.104/2.2482 62.006/2.4412 2.563/0.1009 .005/.0002 22.48/0.885 F780 8 2132 1,2,4,5 57.125/2.2490 62.027/2.4420 (@ .010" u/s) .073/.0029 U/L 3 (Fl)

57.104/2.2482 62.006/2.4412 57.125/2.2490 62.027/2.4420 to be discontinued when stock exhausted.

2.563/0.1009 .005/.0002 (@ .010" u/s) .073/.0029

28.88/1.137

F780

2144 U/L

5M590A

3 (Fl)

57.104/2.2482 62.006/2.4412 2.438/0.0960 .005/.0002 57.125/2.2490 62.027/2.4420 .073/.0029 Overflange length remains constant for standard and undersizes.

Main - half groove. 1,2,4,5 57.104/2.2482 62.006/2.4412 2.438/0.0960 Std. 01 10 20 30 40 57.125/2.2490 62.027/2.4420 3 (Fl) 57.104/2.2482 62.006/2.4412 2.438/0.0960 57.125/2.2490 62.027/2.4420 Overflange length remains constant for standard and undersizes.

5M590P

184

.005/.0002 .073/.0029 .005/.0002 .073/.0029

22.48/0.885

F810

2132A U/L

28.78/1.133

F810

2133A U/L

22.48/0.885

F780

28.78/1.133

F780

2132 U/L 2133 U/L

FORD Type and Location

Standard Shaft Size

Max. Bearing Thickness

Housing Bore

Vertical Oil Clearance

Max. Overall Length

Material Code

Qty. Set

Bearing Shell No.

Engine Set No. Sizes Available

(Contâ&#x20AC;&#x2122;d.) Cam - Performance Set - Heavy duty Al/Tin material. 52.845/2.0805 55.984/2.2041 1.544/0.0608 .025/.0010 1 52.870/2.0815 56.010/2.2051 .127/.0050

17.02/0.670

F830

5610C

52.464/2.0655 52.489/2.0665

55.601/2.1890 55.626/2.1900

1.544/0.0608 .025/.0010 .127/.0050

17.02/0.670

F830

5616C

52.083/2.0505 52.108/2.0515 51.702/2.0355 51.727/2.0365 51.321/2.0205 51.346/2.0215

55.220/2.1740 55.245/2.1750 54.839/2.1590 54.864/2.1600 54.458/2.1440 54.483/2.1450

1.544/0.0608 .025/.0010 .127/.0050 1.544/0.0608 .025/.0010 .127/.0050 1.544/0.0608 .025/.0010 .127/.0050

17.02/0.670

F830

5617C

17.02/0.670

F830

5618C

17.02/0.670

F830

5619C

Cam - for engines with all constant housing bores at 2.2041"-2.2051" (SVO engines). 52.845/2.0805 55.984/2.2041 1.544/0.0608 .025/.0010 17.02/0.670 F830 1-5 52.870/2.0815 56.010/2.2051 .127/.0050

5610C

4 5

Cam 1

52.845/2.0805 52.870/2.0815 52.464/2.0655 52.490/2.0665 52.083/2.0505 52.108/2.0515

55.982/2.2040 56.007/2.2050 55.600/2.1890 55.626/2.1900 55.220/2.1740 55.245/2.1750

51.702/2.0355 51.727/2.0365

51.321/2.0205 51.346/2.0215

2 3

5C1321S Std.

5C1763S Std.

1.530/0.0602

16.89/0.665

F23

F-18-1

1.530/0.0602

16.89/0.665

F23

F-18-2

1.530/0.0602

16.89/0.665

F23

F-18-3

54.839/2.1590 54.864/2.1600

1.530/0.0602

16.89/0.665

F23

F-18-4

54.458/2.1440 54.483/2.1450

1.530/0.0602

16.89/0.665

F23

F-18-5

5C510S Std.

ENGINE

VIN CYL

Bore x Stroke

232 (3.8) OHV 232 (3.8) OHV 232 (3.8) OHV 232 (3.8) OHV Supercharged

3 4 C R

97mm x 86mm 97mm x 86mm 97mm x 86mm 97mm x 86mm

Rod - for engines 1982-1995 only. 58.674/2.3100 61.636/2.4266 58.699/2.3110 61.656/2.4274

V6 V6 V6 V6

1.462/0.0576 .013/.0005 .084/.0033

Rod - .002" oversize OD version of 6B1283P. 58.674/2.3100 61.687/2.4286 1.614/0.0635 .014/.0006 58.699/2.3110 61.707/2.4294 (@ 0.25 mm u/s) .085/.0033

TORQUE SETTINGS Connecting Rod 31-36 ft.lbs/42-48 Nm Main Bearing 65-81 ft.lbs/88-110 Nm

17.06/0.672

F780

Rod - for engines 1996 on - High Strength Aluminum Silicon material. 58.682/2.3103 61.630/2.4264 1.460/0.0575 .013/.0005 19.90/0.783 58.702/2.3111 61.648/2.4271 .065/.0026

F810

Rod - .002" oversize OD version of 6B4500A. 58.682/2.3103 61.630/2.4264 1.587/0.0625 .013/.0005 58.702/2.3111 61.648/2.4271 (@ .25 mm u/s) .065/.0026

F810

Main - for engines 1982-1988 only. 1,3,4 63.978/2.5188 68.890/2.7122 2.437/0.0959 .013/.0005 64.003/2.5198 68.910/2.7130 .084/.0033 2 (Fl) 63.978/2.5188 68.890/2.7122 2.437/0.0959 .013/.0005 64.003/2.5198 68.910/2.7130 .084/.0033 To be superceded by 4M7295A when stock exhausted.

19.90/0.783

21.66/0.853

F780

29.62/1.166

F780

Main - Supercharged engines 1989-95 only. 63.983/2.5190 68.890/2.7122 2.451/0.0965 .013/.0005 1,2 64.003/2.5198 68.910/2.7130 .058/.0023

21.79/0.858

F810

1,2

23.50/0.925

F810

29.62/1.166

F810

21.79/0.858

F810

63.983/2.5190 68.890/2.7122 2.451/0.0965 64.003/2.5198 68.910/2.7130 3 (Fl) 63.983/2.5190 68.890/2.7122 2.438/0.0960 64.003/2.5198 68.910/2.7130 4 63.744/2.5096 68.890/2.7122 2.548/0.1003 63.764/2.5104 68.910/2.7130 Overflange length remains constant for standard and undersizes.

.013/.0005 .058/.0023 .013/.0005 .058/.0023 .025/.0010 .071/.0028

185

5200 IH 9055 IH 4500A IH 9081A IH 5202 U/L 5203 U/L

7294A L 7294WA U 7295A U/L 5229A U/L

6B1283P Std. .25 .50 .75 1.0

6B1283PO/S2 .25 .50 .75

6B4500A Std. .25 .50 .75

6B4500AO/S2 .25 .50 .75

4M1561P Std. .25 .50 .75 1.0

4M1782A Std. .25 .50 .75

FORD Engine Set No. Sizes Available

Type and Location

Standard Shaft Size

Housing Bore

Max. Bearing Thickness

Vertical Oil Clearance

Max. Overall Length

Material Code

Qty. Set

Bearing Shell No.

31 (Contâ&#x20AC;&#x2122;d.) Main - Supercharged engines 1989-95 only. To be superceded by 4M1782A when stock exhausted. 1,2 63.983/2.5190 68.890/2.7122 2.451/0.0965 .013/.0005 21.79/0.858 F780 4 Std. .25 .50 .75 1.0 64.003/2.5198 68.910/2.7130 .058/.0023

4M1782P

3 (Fl)

63.983/2.5190 64.003/2.5198

68.890/2.7122 68.910/2.7130

2.451/0.0965 .013/.0005 .058/.0023

29.62/1.166

F780

5239 U/L

63.744/2.5096 68.890/2.7122 2.548/0.1003 .025/.0010 63.764/2.5104 68.910/2.7130 .071/.0028 Overflange length remains constant for standard and undersizes.

21.79/0.858

F780

5229 U/L

21.79/0.858

F780

5238 U/L

29.62/1.166

F780

5239 U/L

Main - Normally aspirated engines 1989-98 only. 1,2,4 63.983/2.5190 68.890/2.7122 2.451/0.0965 .013/.0005 Std. .25 .50 .75 1.0 64.003/2.5198 68.910/2.7130 .058/.0023

4M1812P

3 (Fl)

63.983/2.5190 68.890/2.7122 2.451/0.0965 .013/.0005 64.003/2.5198 68.910/2.7130 .058/.0023 To be superceded by 4M7295A when stock exhausted.

4M5205P .25 .50 .75

5238 U/L

63.978/2.5188 68.890/2.7122 64.003/2.5198 68.910/2.7130 to be discontinued when stock exhausted.

2.437/0.0959 .013/.0005 .084/.0033

29.72/1.170

F780

5205 U/L

* DIMENSIONAL INFORMATION FOR 4M5205P Overall Width (Nominal) Increase in Width 0.25 mm u/s shaft 1.170" +0.004" 0.50 mm u/s shaft 1.170" +0.004" 0.75 mm u/s shaft 1.170" +0.004"

4M5208P .25 .50 .75

Main - engines 1982-88 - Optional set to 4M1561P with +0.010" overflange length increase. *See dimensional infromation below. 1,3,4 63.978/2.5188 68.890/2.7122 2.437/0.0959 .013/.0005 21.66/0.853 F780 6 5202 64.003/2.5198 68.910/2.7130 .084/.0033 U/L 3 (Fl) 63.978/2.5188 68.890/2.7122 2.437/0.0959 .013/.0005 29.87/1.176 F780 2 5208 64.003/2.5198 68.910/2.7130 .058/.0023 U/L to be discontinued when stock exhausted. * DIMENSIONAL INFORMATION FOR 4M5208P Overall Width (Nominal) Increase in Width 0.25 mm u/s shaft 1.176" +0.010" 0.50 mm u/s shaft 1.176" +0.010" 0.75 mm u/s shaft 1.176" +0.010"

4M7295A Std. .25 .50 .75

Main - for engines 1982 on (excl. supercharged) - High Strength Aluminum Silicon material. 63.983/2.5190 68.890/2.7122 2.451/0.0965 .013/.0005 23.50/0.925 F810 1,2,4 64.003/2.5198 68.910/2.7130 .058/.0023

7294WA U

1,2,4

7294A L 7295A U/L

2.451/0.0965 .013/.0005 .058/.0023 2.438/0.0960 .013/.0005 .058/.0023

21.79/0.858

F810

29.62/1.166

F810

Cam - 1982-87 engines. 52.083/2.0505 55.664/2.1915 1,4 52.108/2.0515 55.690/2.1925

1.763/0.0694

16.26/0.640

F23

F-45-1

2,3

55.283/2.1765 55.308/2.1775

1.570/0.0619

14.22/0.560

F23

F-45-2

55.664/2.1915 55.687/2.1924 55.664/2.1915 55.687/2.1924

1.763/0.0694 .025/.0010 .076/.0030 1.570/0.0619 .025/.0010 .076/.0030

16.26/0.640

F23

F-52-1

14.22/0.560

F23

F-51-2

Balance Shaft - 1988-04 engines. Front & 52.083/2.0505 55.664/2.1915 Rear 52.108/2.0515 55.690/2.1925

1.763/0.0694 .076/.0030

16.26/0.640

F23

AGB-51-1

3 (Fl)

4C1197S Std.

4C1447S Std.

2BS1445S Std.

63.983/2.5190 64.003/2.5198 63.983/2.5190 64.003/2.5198

52.083/2.0505 52.108/2.0515

Cam - 1988-04 engines. 1,4 52.083/2.0505 52.108/2.0515 2,3 52.083/2.0505 52.108/2.0515

68.890/2.7122 68.910/2.7130 68.890/2.7122 68.910/2.7130

186

FORD Type and Location

Standard Shaft Size

ENGINE 240 (3.9) 240 (3.9) 240 (3.9) 240 (3.9) 240 (3.9) 300 (4.9) 300 (4.9) 300 (4.9) 300 (4.9) 300 (4.9)

Max. Bearing Thickness

Housing Bore

VIN CYL A B E V 9 B E K Y

L6 L6 L6 L6 L6 L6 L6 L6 L6 L6

Vertical Oil Clearance

Bore x Stroke

Max. Overall Length

Material Code

Qty. Set

Bearing Shell No.

Engine Set No. Sizes Available

TORQUE SETTINGS

Connecting Rod 40-45 ft.lbs./54-61 Nm Main Bearing 60-70 ft.lbs./81-95 Nm

4.00 x 3.18 4.00 x 3.18 4.00 x 3.18 4.00 x 3.18 4.00 x 3.18 4.00 x 3.98 4.00 x 3.98 4.00 x 3.98 4.00 x 3.98 4.00 x 3.98

Rod 53.919/2.1228 53.939/2.1236

57.785/2.2750 57.805/2.2758

1.923/0.0757 .010/.0004 .066/.0026

Rod - .002" oversize OD version of 6B699P. 53.919/2.1228 57.836/2.2770 2.075/0.0817 .010/.0004 53.939/2.1236 57.856/2.2778 (@ .010" u/s) .067/.0026

20.32/0.800

F780

2180 IH 9050 IH

Main - Alt set to 7M979P with +0.010" overflange length increase for undersizes. * See below for dimensional information. 60.914/2.3982 65.791/2.5902 2.428/0.0956 .025/.0010 24.13/0.950 F780 12 2185 1-4,6,7 60.935/2.3990 65.811/2.5910 .066/.0026 U/L 5 (Fl)

60.914/2.3982 65.791/2.5902 60.935/2.3990 65.811/2.5910 to be discontinued when stock exhausted.

.010" u/s shaft .020" u/s shaft .030" u/s shaft .040" u/s shaft

2.428/0.0956 .025/.0010 .066/.0026

30.61/1.205

F780

.025/.0010 .066/.0026 .025/.0010 .066/.0026

24.13/0.950

F780

2185 U/L 2187 U/L

F780

Cam - for engines from 6/85 - 96. (360 degree OD groove) 51.232/2.0170 54.839/2.1590 1.770/0.0695 1,4 51.257/2.0180 54.864/2.1600

22.00/0.866

F23

F-49-1B

2, 3

1.580/0.0624

21.97/0.865

F23

F-23-1B

Cam - for engines from 6/85 - 96. 51.232/2.0170 54.839/2.1590 1,4 51.257/2.0180 54.864/2.1600

1.770/0.0695

22.00/0.866

F23

F-49-1

2,3

1.570/0.0618

22.02/0.867

F23

F-49-2

Cam - Alternate set to 4C567S with O.D. groove. 51.232/2.0170 54.458/2.1440 1.580/0.0624 1,2,3,4 51.257/2.0180 54.483/2.1450

21.97/0.865

F23

F-23-1B

Cam - for engines from 1965-5/85. 51.232/2.0170 54.458/2.1440 1,2,3,4 51.257/2.0180 54.483/2.1450

21.97/0.865

51.232/2.0170 51.257/2.0180

54.458/2.1440 54.483/2.1450

10 20 30 40

7M2193P 10 20 30 40

2193 U/L

30.35/1.195

54.458/2.1440 54.483/2.1450

6B699PO/S2

* DIMENSIONAL INFORMATION FOR 7M2193P Overall Width (Nominal) Increase in Width 1.205" +0.010" 1.205" +0.010" 1.205" +0.010" 1.205" +0.010"

Main - engines 1966-96 with 3.60" flange O.D. 1-4,6,7 60.914/2.3982 65.791/2.5902 2.428/0.0956 60.935/2.3990 65.811/2.5910 5 (Fl) 60.914/2.3982 65.791/2.5902 2.428/0.0956 60.935/2.3990 65.811/2.5910 Overflange length remains constant for standard and undersizes.

51.232/2.0170 51.257/2.0180

6B699P Std. 01 10 20 30 40

7M979P Std. 01 10 20 30 40

4C1254BS Std.

4C1254S Std.

4C567BS Std.

1.580/0.0624

F23

F-23-1A

4C567S Std.

ENGINE

VIN CYL

Bore x Stroke

245 (4.0) OHV

3.95 x 3.32

TORQUE SETTINGS

Connecting Rod 18-24 ft.lbs/25-32 Nm Main Bearing 66-77 ft.lbs/89-104 Nm

Rod 53.980/2.1252 54.000/2.1260

56.820/2.2370 56.840/2.2378

1.410/0.0555 .012/.0005 .078/.0030

187

16.48/0.649

F780

1656 IH

6B723P Std. 10 20 30 40

FORD Engine Set No. Sizes Available

Type and Location

Standard Shaft Size

Housing Bore

Max. Bearing Thickness

Vertical Oil Clearance

Max. Overall Length

Material Code

Qty. Set

Bearing Shell No.

16.48/0.649

F780

9060 IH

21.59/0.850

F780

21.59/0.850

F780

26.29/1.035

F780

1657 U 1663 L 1658 IH

19.80/0.780

F23

F-50-1

17.90/0.705

F23

F-50-2

17.90/0.705

F23

F-50-3

21.12/0.830

F23

F-50-4A

33 (Contâ&#x20AC;&#x2122;d.) 6B723PO/S2 10 20 30 40

4M2006P Std. 10 20 30

4C1441AS Std.

4C1441S

Rod - .002" oversize OD version of 6B723P. 53.980/2.1252 56.869/2.2390 1.559/0.0614 .005/.0002 54.000/2.1260 56.891/2.2400 (@ .010" u/s) .073/.0029 Main 1,2,4 Upper 1,2,4 Lower 3 (Fl)

60.620/2.3866 60.640/2.3874 60.620/2.3866 60.640/2.3874 60.620/2.3866 60.640/2.3874

1.806/0.0711 .015/.0006 .081/.0032 1.806/0.0711 .015/.0006 .081/.0032 1.806/0.0711 .015/.0006 .081/.0032

Cam - Alternate set to 4C1441S with 0.830" wide #4 cam. 49.555/1.9510 52.756/2.0770 1.570/0.0619 1 49.581/1.9520 52.807/2.0790 2 49.200/1.9370 52.375/2.0620 1.560/0.0614 49.225/1.9380 52.426/2.0640 3 48.819/1.9220 51.994/2.0470 1.560/0.0614 48.844/1.9230 52.045/2.0490 4 48.438/1.9070 51.615/2.0321 1.560/0.0614 48.463/1.9080 51.666/2.0341 Cam 1

Std. 2 3 4

56.980/2.2433 57.000/2.2441 56.980/2.2433 57.000/2.2441 56.980/2.2433 57.000/2.2441

49.555/1.9510 49.581/1.9520

52.756/2.0770 52.807/2.0790

1.570/0.0619

19.80/0.780

F23

F-50-1

49.200/1.9370 49.225/1.9380 48.819/1.9220 48.844/1.9230 48.438/1.9070 48.463/1.9080

52.375/2.0620 52.426/2.0640 51.994/2.0470 52.045/2.0490 51.615/2.0321 51.666/2.0341

1.560/0.0614

17.90/0.705

F23

F-50-2

1.560/0.0614

17.90/0.705

F23

F-50-3

1.560/0.0614

15.10/0.595

F23

F-50-4

ENGINE

VIN CYL

Bore x Stroke

245 (4.0) SOHC 245 (4.0) SOHC

E K

3.95 x 3.32 3.95 x 3.32

V6 V6

TORQUE SETTINGS Connecting Rod 18-24 ft.lbs/25-32 Nm Main Bearing 66-77 ft.lbs/89-104 Nm

Rod

6B723P

53.980/2.1252 54.000/2.1260

Std. 10 20 30 40

6B723PO/S2 10 20 30 40

4M2006P Std. 10 20 30

1.410/0.0555 .012/.0005 .078/.0030

Rod - .002" oversize OD version of 6B723P. 53.980/2.1252 56.869/2.2390 1.559/0.0614 .005/.0002 54.000/2.1260 56.891/2.2400 (@ .010" u/s) .073/.0029 Main 1,2,4 Upper 1,2,4 Lower

16.48/0.649

F780

1656 IH

16.48/0.649

F780

9060 IH

56.980/2.2433 57.000/2.2441

60.620/2.3866 60.640/2.3874

1.806/0.0711 .015/.0006 .081/.0032

21.59/0.850

F780

1657 U

56.980/2.2433 57.000/2.2441

60.620/2.3866 60.640/2.3874

1.806/0.0711 .015/.0006 .081/.0032

21.59/0.850

F780

1663 L

56.980/2.2433 57.000/2.2441

60.620/2.3866 60.640/2.3874

1.806/0.0711 .015/.0006 .081/.0032

26.29/1.035

F780

1658 IH

AR Auxiliary Front

47.046/1.8522

1.549/0.0610

29.00/1.142

F23

FG-53-1

Rear

45.903/1.8072

1.549/0.0610

22.98/0.905

F23

FG-53-2

3 (Fl)

2C6002S

56.820/2.2370 56.840/2.2378

Std.

ENGINE

VIN CYL

Bore x Stroke

250 (4.1) 250 (4.1)

C L

3.68 x 3.91 3.68 x 3.91

L6 L6

TORQUE SETTINGS Connecting Rod 21-26 ft.lbs/28-35 Nm Main Bearing 60-70 ft.lbs./81-95 Nm

Rod

6B583P Std. 10 20 30 40

53.934/2.1234 53.945/2.1238

56.871/2.2390 56.891/2.2398

1.458/0.0574 .010/.0004 .067/.0026

188

20.57/0.810

F780

2150 IH

FORD Type and Location

Standard Shaft Size

Max. Bearing Thickness

Housing Bore

Vertical Oil Clearance

Max. Overall Length

Material Code

Qty. Set

Bearing Shell No.

Engine Set No. Sizes Available

(Contâ&#x20AC;&#x2122;d.) Main - Alt set to 7M979P with +0.010" overflange length increase for undersizes. * See below for dimensional information. 60.914/2.3982 65.791/2.5902 2.428/0.0956 .025/.0010 24.13/0.950 F780 12 2185 1-4,6,7 60.935/2.3990 65.811/2.5910 .066/.0026 U/L 5 (Fl)

60.914/2.3982 65.791/2.5902 60.935/2.3990 65.811/2.5910 to be discontinued when stock exhausted.

.010" u/s shaft .020" u/s shaft .030" u/s shaft .040" u/s shaft Main 1-4,6,7

60.914/2.3982 60.935/2.3990

65.791/2.5902 65.811/2.5910

2.428/0.0956 .025/.0010 .066/.0026

30.61/1.205

F780

* DIMENSIONAL INFORMATION FOR 7M2193P Overall Width (Nominal) Increase in Width 1.205" +0.010" 1.205" +0.010" 1.205" +0.010" 1.205" +0.010"

24.13/0.950

60.914/2.3982 65.791/2.5902 2.428/0.0956 .025/.0010 60.935/2.3990 65.811/2.5910 .066/.0026 Overflange length remains constant for standard and undersizes.

30.35/1.195

F780

2187 U/L

5 (Fl)

F780

2185 U/L

45.960/1.8095 45.985/1.8105

50.241/1.9780 50.267/1.9790

2.110/0.0832

18.42/0.725

F23

F-32-1

45.960/1.8095 45.985/1.8105

49.860/1.9630 49.886/1.9640

1.920/0.0757

18.42/0.725

F23

F-17-2

45.960/1.8095 45.985/1.8105

49.479/1.9480 49.505/1.9490

1.730/0.0682

18.42/0.725

F23

F-17-3

45.960/1.8095 45.985/1.8105

49.098/1.9330 49.124/1.9340

1.540/0.0607

18.42/0.725

F23

F-17-4

VIN CYL

Bore x Stroke

256 (4.2) OHV

3.81 x 3.74

4C703S

TORQUE SETTINGS

19.90/0.783

Rod - .002" oversize OD version of 6B4500A. 58.682/2.3103 61.630/2.4264 1.587/0.0625 .013/.0005 58.702/2.3111 61.648/2.4271 (@ .25 mm u/s) .065/.0026

19.90/0.783

Main - High Strength Aluminum Silicon material. 1,2,4 63.983/2.5190 68.890/2.7122 2.451/0.0965 64.003/2.5198 68.910/2.7130 1,2,4 63.983/2.5190 68.890/2.7122 2.451/0.0965 64.003/2.5198 68.910/2.7130 3 (Fl) 63.983/2.5190 68.890/2.7122 2.438/0.0960 64.003/2.5198 68.910/2.7130

Connecting Rod 15-18 ft.lbs/20-24 Nm Step 1 Connecting Rod 29-33 ft.lbs/39-45 Nm Step 2 Connecting Rod 90-120 degree turn Step 3 Main Bearing 37 ft.lbs + 120 deg Vans Main Bearing 65-81 ft.lbs Trucks

Rod - High Strength Aluminum Silicon material. 58.682/2.3103 61.630/2.4264 1.460/0.0575 .013/.0005 58.702/2.3111 61.648/2.4271 .065/.0026

.013/.0005 .058/.0023 .013/.0005 .058/.0023 .013/.0005 .058/.0023

23.50/0.925

F810

21.79/0.858

F810

29.62/1.166

F810

4500A IH 9081A IH 7294WA U 7294A L 7295A U/L

52.083/2.0505 52.108/2.0515

55.664/2.1915 55.687/2.1924

1.763/0.0694 .025/.0010 .076/.0030

16.26/0.640

F23

F-52-1

52.083/2.0505 52.108/2.0515

55.664/2.1915 55.687/2.1924

1.570/0.0619 .025/.0010 .076/.0030

14.22/0.560

F23

F-51-2

Balance Shaft 52.083/2.0505 Front & 52.108/2.0515 Rear

55.664/2.1915 55.690/2.1925

1.763/0.0694 .076/.0030

16.26/0.640

F23

AGB-51-1

2,3

7M979P Std. 01 10 20 30 40

Std.

ENGINE

Cam 1,4

7M2193P 10 20 30 40

2193 U/L

2.428/0.0956 .025/.0010 .066/.0026

Cam 1

6B4500A Std. .25 .50 .75

6B4500AO/S2 .25 .50 .75

4M7295A Std. .25 .50 .75

4C1447S Std.

2BS1445S Std.

189

FORD Engine Set No. Sizes Available

Type and Location

Standard Shaft Size

Housing Bore

Max. Bearing Thickness

Vertical Oil Clearance

ENGINE

VIN CYL

Bore x Stroke

281 (4.6) SOHC 281 (4.6) SOHC 281 (4.6) SOHC 281 (4.6) SOHC

6 9 W X

90.2mm x 90mm 90.2mm x 90mm 90.2mm x 90mm 90.2mm x 90mm

V8 V8 V8 V8

Max. Overall Length

Material Code

Qty. Set

Bearing Shell No.

TORQUE SETTINGS Connecting Rod 23 ft.lbs/31 Nm + 90 deg Main Bearing 24 ft.lbs/33 Nm + 90 deg

Rod

8B1442A

52.984/2.0860 53.002/2.0867

20.96/0.825

F810

5636A IH

20.95/0.825

F810

9080A IH

20.96/0.825

F780

5636 IH

20.95/0.825

F780

9080 IH

18.25/0.719

F780

19.12/0.753

F780

22.61/0.890

F780

5638 L 5638W U 5639 L

2.36/0.093 76.000/2.9921 91.500/3.6024 76.250/3.0020 91.750/3.6122 (O.D.) (I.D.) Set includes one thrustwasher and one lower flanged thrust bearing. Use on No. 5 position.

F817

Std. .25 .50 .75 1.0

8B1442AO/S2 .25 .50 .75 1.0

56.866/2.2388 56.886/2.2396

1.928/0.0759 .012/.0005 .063/.0025

Rod - .002" oversize OD version of 8B1442A. 52.984/2.0860 56.916/2.2408 2.075/0.0817 .013/.0005 53.002/2.0867 56.937/2.2416 (@ .25 mm u/s) .078/.0031 Rod

8B1442P Std. .25 .50 .75 1.0

8B1442PO/S2 .25 .50 .75 1.0

52.984/2.0860 56.866/2.2388 1.928/0.0759 .012/.0005 53.002/2.0867 56.886/2.2396 .063/.0025 to be superceded by 8B1442A when stock exhausted. Rod - .002" oversize OD version of 8B1442P. 52.984/2.0860 56.916/2.2408 2.075/0.0817 .013/.0005 53.002/2.0867 56.937/2.2416 (@ .25 mm u/s) .078/.0031 to be superceded by 8B1442AO/S2 when stock exhausted.

Main - for 1993-04 cast iron engines (VIN W). 1-4 67.483/2.6568 72.403/2.8505 2.443/0.0962 Std. .25 .50 .75 1.0 67.503/2.6576 72.420/2.8512 1-5 67.483/2.6568 72.403/2.8505 2.443/0.0962 67.503/2.6576 72.420/2.8512 5 (Fl) 67.483/2.6568 72.403/2.8505 2.443/0.0962 67.503/2.6576 72.420/2.8512

5M2007P

.014/.0006 .077/.0030 .014/.0006 .077/.0030 .014/.0006 .077/.0030

5 (TW)

5M5649P 1.0

5639T U

Main - alternate set to 5M7141P with +0.010" overflange length increase. * See below for dimensional information. 67.483/2.6568 72.403/2.8505 2.568/0.1011 .014/.0006 18.25/0.719 F780 4 5638 1-4 67.503/2.6576 72.420/2.8512 (@ 0.25 mm u/s) .077/.0030 L 1-4

67.483/2.6568 72.403/2.8505 2.568/0.1011 67.503/2.6576 72.420/2.8512 (@ 0.25 mm u/s) 5 (Fl) 67.483/2.6568 72.403/2.8505 2.568/0.1011 67.503/2.6576 72.420/2.8512 (@ 0.25 mm u/s) to be discontinued when stock is exhausted.

.014/.0006 .077/.0030 .014/.0006 .077/.0030

19.12/0.753

F780

22.86/0.900

F780

5638W U 5649 U/L

* DIMENSIONAL INFORMATION FOR 5M5649P Overall Width (Nominal) Increase in Width 1.00mm u/s shaft 0.900" + 0.010" Main - for 1991-92 engines. (Upper flange bearing has no tang) 1-4 67.483/2.6568 72.403/2.8505 2.443/0.0962 .014/.0006 Std. .25 .50 .75 1.0 67.503/2.6576 72.420/2.8512 .077/.0030 1-4 67.483/2.6568 72.403/2.8505 2.443/0.0962 .014/.0006 67.503/2.6576 72.420/2.8512 .077/.0030 5 (Fl) 67.483/2.6568 72.403/2.8505 2.443/0.0962 .014/.0006 67.503/2.6576 72.420/2.8512 .077/.0030 Overflange length remains constant for standard and undersizes.

5M7141P

190

18.25/0.719

F780

19.12/0.753

F780

22.61/0.890

F780

5638 L 5638W U 5639 U/L

FORD Type and Location

Standard Shaft Size

Max. Bearing Thickness

Housing Bore

Vertical Oil Clearance

Max. Overall Length

Material Code

Qty. Set

Bearing Shell No.

Engine Set No. Sizes Available

(Contâ&#x20AC;&#x2122;d.) Main - for 1996-04 engines (VIN 6,X). 1 67.480/2.6567 72.400/2.8504 67.506/2.6577 72.421/2.8512

2.443/0.0962 .008/.0003 .071/.0028

19.26/0.758

2.443/0.0962 .008/.0003 .071/.0028

20.06/0.790

F810

7296A U

67.480/2.6567 72.400/2.8504 2.443/0.0962 .008/.0003 67.506/2.6577 72.421/2.8512 .071/.0028 5 76.750/3.0216 96.750/3.8090 (ID) (OD) 77.000/3.0315 97.000/3.8189 Set includes three thrustwashers. Use on No. 5 position.

20.06/0.790

F810

2.92/0.115

F810

7296A L 7296T U/L

1.083/0.0426 .013/.0005 .038/.0015

14.70/0.579

F810

5194A L

1.083/0.0426 .013/.0005 .038/.0015

14.70/0.579

F810

5195A U

23.75/0.935

F100

RB4113

2,3,4,5

67.480/2.6567 67.506/2.6577

72.400/2.8504 72.421/2.8512

1-5

Cam Tower - repair insets. 26.937/1.0605 29.119/1.1464 1-6 26.962/1.0615 29.144/1.1474 1-6

26.937/1.0605 26.962/1.0615

29.190/1.1492 29.144/1.1474

Small End - not bored, single pieces. 21.994/0.8659 24.016/0.9455 21.999/0.8661 24.041/0.9465

F810

7293A U

5M7296A Std. .25 .50 .75 1.0

6C1100A Std. .25

RB4113 Semi

ENGINE

VIN CYL

Bore x Stroke

281 (4.6) DOHC 281 (4.6) DOHC Supercharged

V Y

90.2mm x 90mm 90.2mm x 90mm

V8 V8

TORQUE SETTINGS

Connecting Rod 23 ft.lbs/31 Nm + 90 deg Main Bearing 24 ft.lbs/33 Nm + 90 deg

Rod 52.984/2.0860 53.002/2.0867

56.866/2.2388 56.886/2.2396

1.928/0.0759 .012/.0005 .063/.0025

Rod - .002" oversize OD version of 8B1442A. 52.984/2.0860 56.916/2.2408 2.075/0.0817 .013/.0005 53.002/2.0867 56.937/2.2416 (@ .25 mm u/s) .078/.0031

20.96/0.825

20.95/0.825

F810

5636A IH 9080A IH

8B1442A Std. .25 .50 .75 1.0

8B1442AO/S2 .25 .50 .75 1.0

Rod 52.984/2.0860 56.866/2.2388 1.928/0.0759 .012/.0005 53.002/2.0867 56.886/2.2396 .063/.0025 to be superceded by 8B1442A when stock exhausted. Rod - .002" oversize OD version of 8B1442P. 52.984/2.0860 56.916/2.2408 2.075/0.0817 .013/.0005 53.002/2.0867 56.937/2.2416 (@ .25 mm u/s) .078/.0031 to be superceded by 8B1442AO/S2 when stock exhausted.

20.96/0.825

20.95/0.825

F780

5636 IH

9080 IH

8B1442PO/S2

6C1200A

Cam Tower - for engines early 1996 only. 26.937/1.0605 29.119/1.1464 1.083/0.0426 .015/.0006 1,6,7,12 36.962/1.4552 29.144/1.1474 .081/.0032

14.70/0.579

F810

5195A L

1,6,7,12

26.937/1.0605 26.962/1.0615

29.119/1.1464 29.144/1.1474

1.083/0.0426 .015/.0006 .081/.0032

14.70/0.579

F810

5192A U

2-5,8-11

26.937/1.0605 26.962/1.0615 26.937/1.0605 26.962/1.0615

29.119/1.1464 29.144/1.1474 29.119/1.1464 29.144/1.1474

1.083/0.0426 .015/.0006 .081/.0032 1.083/0.0426 .015/.0006 .081/.0032

11.80/0.465

F810

5191A L 5193A

Cam Tower - for engines late 1996 on. 26.937/1.0605 29.119/1.1464 1,6,7,12 26.962/1.0615 29.144/1.1474

1.093/0.0430 .015/.0006 .081/.0032

14.70/0.579

F810

5190A L

11.80/0.465

1,6,7,12

26.937/1.0605 26.962/1.0615

29.119/1.1464 29.144/1.1474

1.083/0.0426 .015/.0006 .081/.0032

14.70/0.579

F810

5192A U

2-5,8-11

26.937/1.0605 26.962/1.0615 26.937/1.0605 26.962/1.0615

29.119/1.1464 29.144/1.1474 29.119/1.1464 29.144/1.1474

1.083/0.0426 .015/.0006 .081/.0032 1.083/0.0426 .015/.0006 .081/.0032

11.80/0.465

F810

11.80/0.465

F810

5191A U 5193A L

23.75/0.935

F100

2-5,8-11

Small End - not bored, single pieces. 21.994/0.8659 24.016/0.9455 21.999/0.8661 24.041/0.9465

8B1442P Std. .25 .50 .75 1.0

RB4113

.25 .50 .75 1.0

Std.

6C1201A Std.

RB4113 Semi

191

FORD Engine Set No. Sizes Available

Type and Location

Standard Shaft Size

Housing Bore

Max. Bearing Thickness

Vertical Oil Clearance

Max. Overall Length

Material Code

Qty. Set

Bearing Shell No.

ENGINE

VIN CYL

Bore x Stroke

330 (5.4) SOHC Supercharged 330 (5.4) SOHC 330 (5.4) SOHC 330 (5.4) SOHC 330 (5.4) SOHC - Bi-Fuel

3 5 L M Z

90.2mm x 105.7mm Connecting Rod 23 ft.lbs/31 Nm + 90 deg 90.2mm x 105.7mm Main Bearing 24 ft.lbs/33 Nm + 90 deg 90.2mm x 105.7mm 90.2mm x 105.7mm 90.2mm x 105.7mm

V8 V8 V8 V8 V8

TORQUE SETTINGS

Rod

8B1442A

52.984/2.0860 53.002/2.0867

Std. .25 .50 .75 1.0

8B1442AO/S2 .25 .50 .75 1.0

56.866/2.2388 56.886/2.2396

1.928/0.0759 .012/.0005 .063/.0025

20.96/0.825

F810

5636A IH

20.95/0.825

F810

9080A IH

20.96/0.825

F780

5636 IH

20.95/0.825

F780

9080 IH

19.26/0.758

F810

20.06/0.790

F810

20.06/0.790

F810

2.92/0.115

F810

7293A U 7296A U 7296A L 7296T U/L

1.083/0.0426 .013/.0005 .038/.0015

14.70/0.579

F810

5194A L

1.083/0.0426 .013/.0005 .038/.0015

14.70/0.579

F810

5195A U

23.75/0.935

F100

RB4113

Rod - .002" oversize OD version of 8B1442A. 52.984/2.0860 56.916/2.2408 2.075/0.0817 .013/.0005 53.002/2.0867 56.937/2.2416 (@ .25 mm u/s) .078/.0031 Rod

8B1442P Std. .25 .50 .75 1.0

8B1442PO/S2 .25 .50 .75 1.0

5M7296A Std. .25 .50 .75 1.0

6C1100A Std. .25

67.480/2.6567 72.400/2.8504 2.443/0.0962 67.506/2.6577 72.421/2.8512 2,3,4,5 67.480/2.6567 72.400/2.8504 2.443/0.0962 67.506/2.6577 72.421/2.8512 1-5 67.480/2.6567 72.400/2.8504 2.443/0.0962 67.506/2.6577 72.421/2.8512 5 76.750/3.0216 96.750/3.8090 (ID) (OD) 77.000/3.0315 97.000/3.8189 Set includes three thrustwashers. Use on No. 5 position. Cam Tower - repair insert. 26.937/1.0605 29.119/1.1464 1-6 26.962/1.0615 29.144/1.1474 1-6

RB4113 Semi

26.937/1.0605 26.962/1.0615

29.190/1.1492 29.144/1.1474

Small End - not bored, single pieces. 21.994/0.8659 24.016/0.9455 21.999/0.8661 24.041/0.9465

192

.008/.0003 .071/.0028 .008/.0003 .071/.0028 .008/.0003 .071/.0028

FORD Type and Location

Standard Shaft Size

ENGINE 330 (5.4) 352 (5.8) 360 (5.9) 361 (5.9) 390 (6.4) 390 (6.4) 390 (6.4) 390 (6.4) 390 (6.4) 390 (6.4) 390 (6.4) 410 427 (7.0) 427 (7.0) 428 (7.0) 428 (7.0) 428 (7.0) 428 (7.0)

Max. Bearing Thickness

Housing Bore

VIN CYL

Y H M S X Y Z W P Q R

V8 V8 V8 V8 V8 V8 V8 V8 V8 V8 V8 V8 V8 V8 V8 V8 V8 V8

Vertical Oil Clearance

Bore x Stroke

Max. Overall Length

Material Code

Qty. Set

Bearing Shell No.

Engine Set No. Sizes Available

TORQUE SETTINGS

Connecting Rod 40-45 ft.lbs/54-61 Nm (All except 406,427

3.88 x 3.50 4.00 x 3.50 4.05 x 3.50 4.05 x 3.50 4.05 x 3.78 4.05 x 3.78 4.05 x 3.78 4.05 x 3.78 4.05 x 3.78 4.05 x 3.78 4.05 x 3.78 4.05 x 3.98 4.23 x 3.78 4.23 x 3.78 4.23 x 3.78 4.23 x 3.78 4.23 x 3.78 4.23 x 3.78

engines)

Connecting Rod 53-58 ft.lbs/72-79 Nm (406,427 engines only)

Main Bearing 95-105 ft.lbs/129-142 Nm

Rod 61.925/2.4380 61.946/2.4388

65.804/2.5907 65.824/2.5915

1.923/0.0757 .012/.0005 .078/.0031

Rod - .002" oversize OD version of 8B760P. 61.925/2.4380 65.855/2.5927 2.075/0.0817 .013/.0005 61.946/2.4388 65.875/2.5935 (@ .010" u/s) .080/.0031

18.67/0.735

F780

2110 IH 9061 IH

Main - optional set to 5M685P with +0.010" overflange length increase for undersizes. *See below for dimensional information. 69.809/2.7484 74.706/2.9412 2.420/0.0953 .010/.0004 23.17/0.912 F780 8 2115 1,2,4,5 69.830/2.7492 74.727/2.9420 .078/.0031 IH 3(Fl)

69.809/2.7484 74.706/2.9412 69.830/2.7492 74.727/2.9420 Stock not available from fee warehouses.

.010" u/s shaft .020" u/s shaft .030" u/s shaft .040" u/s shaft

2.425/0.0955 .068/.0027

28.65/1.128

F780

3(Fl)

28.40/1.118

F780

2114 IH

Main - engines 1966-78 with 3.888"-3.948" flange O.D. - full groove. 69.809/2.7484 74.706/2.9412 2.433/0.0958 .010/.0004 1,2,4,5 69.830/2.7492 74.727/2.9420 .078/.0031

23.17/0.912

F780

2115 IH

3 (Fl)

28.40/1.118

F780

2118 IH

15.88/0.625

F23

F-33-1

15.88/0.625

F23

F-15-2

15.88/0.625

F23

F-15-3

15.88/0.625

F23

F-14-4

14.35/0.565

F23

F-15-5

69.809/2.7484 74.706/2.9412 2.425/0.0955 .068/.0027 69.830/2.7492 74.727/2.9420 Overflange length remains constant for standard and undersizes.

69.809/2.7484 74.706/2.9412 2.441/0.0961 .010/.0004 69.830/2.7492 74.727/2.9420 .078/.0031 Overflange length remains constant for standard and undersizes. Cam - all engines except 1966-67 427 wedge head. 1 53.945/2.1238 58.661/2.3095 2.320/0.0913 54.970/2.1248 58.687/2.3105 2 53.945/2.1238 58.280/2.2945 2.140/0.0841 54.970/2.1248 58.306/2.2955 3 53.945/2.1238 57.899/2.2795 1.950/0.0766 54.970/2.1248 57.925/2.2805 4 53.945/2.1238 57.518/2.2645 1.760/0.0691 54.970/2.1248 57.544/2.2655 57.137/2.2495 57.163/2.2505

10 20 30 40

5M2119P 10 20 30 40

* DIMENSIONAL INFORMATION FOR 5M2119P Overall Width (Nominal) Increase in Width 1.128" +0.010" 1.128" +0.010" 1.128" +0.010" 1.128" +0.010"

23.17/0.912

53.945/2.1238 54.970/2.1248

8B760PO/S2

2119 IH

Main - engines 1964-65 with 3.764"-3.829" flange O.D. - full groove. 69.809/2.7484 74.706/2.9412 2.420/0.0953 .010/.0004 1,2,4,5 69.830/2.7492 74.727/2.9420 .078/.0031

8B760P Std. 10 20 30 40

F780

2115 IH

5M685P Std. 10 20 30 40

5M863P Std. 10 20 30 40

5C781S Std.

1.560/0.0616

193

FORD Engine Set No. Sizes Available

Type and Location

Standard Shaft Size

Housing Bore

Max. Bearing Thickness

Vertical Oil Clearance

Max. Overall Length

Material Code

Qty. Set

Bearing Shell No.

40 (Contâ&#x20AC;&#x2122;d.) AB02127R Ream

AB02201 Semi

Small End - requires light reaming. 26.314/1.0360 26.365/1.0380

0.927/0.0365

31.75/1.250

F100

223-3501

Small End - requires boring. 26.314/1.0360 26.365/1.0380

1.044/0.0411

30.23/1.190

F100

223-3598

ENGINE

VIN CYL

Bore x Stroke

351 (5.8) Cleveland 351 (5.8) Cleveland 351 (5.8) Cleveland

H M Q

4.00 x 3.50 4.00 x 3.50 4.00 x 3.50

V8 V8 V8

TORQUE SETTINGS Connecting Rod 40-45 ft.lbs/54-61 Nm Main Bearing 95-105 ft.lbs./129-142 Nm

Rod

8B927P

58.682/2.3103 58.702/2.3111

18.44/0.726

F780

2106C IH

18.18/0.716

F780

9051 IH

2.443/0.0962 .003/.0001 .071/.0028

22.35/0.880

F780

2107 U/L

69.809/2.7484 74.719/2.9417 2.443/0.0962 .003/.0001 69.830/2.7492 74.740/2.9425 .071/.0028 Overflange length remains constant for standard and undersizes.

28.40/1.118

F780

2108 U/L

Std. 01 10 20 30 40

8B927PO/S2 10 20 30 40

61.880/2.4362 61.897/2.4369

1.588/0.0625 .002/.0001 .065/.0026

Rod - .002" oversize OD version of 8B927P. 58.682/2.3103 61.931/2.4382 1.740/0.0685 .003/.0001 58.702/2.3111 61.948/2.4390 (@ .010" u/s) .066/.0026

Main - half groove. 1,2,4,5 69.809/2.7484 Std. 01 10 20 30 40 69.830/2.7492

5M1010P

74.719/2.9417 74.740/2.9425

3 (Fl)

5C710C Std.

Cam - Performance 53.950/2.1240 1 53.975/2.1250

16.89/0.665

F23

FP-26-1

52.464/2.0655 52.489/2.0665

55.600/2.1890 55.626/2.1900

1.530/0.0602

16.89/0.665

F23

FP-18-2

52.083/2.0505 52.108/2.0515 51.702/2.0355 51.727/2.0365 51.321/2.0205 51.346/2.0215

55.220/2.1740 55.245/2.1750 54.839/2.1590 54.864/2.1600 54.458/2.1440 54.483/2.1450

1.530/0.0602

16.89/0.665

F23

FP-18-3

1.530/0.0602

16.89/0.665

F23

FP-18-4

1.530/0.0602

16.89/0.665

F23

FP-18-5

53.950/2.1240 53.975/2.1250

57.137/2.2495 57.163/2.2505

1.565/0.0616

16.89/0.665

F23

F-26-1

52.464/2.0655 52.489/2.0665 52.083/2.0505 52.108/2.0515 51.702/2.0355 51.727/2.0365 51.321/2.0205 51.346/2.0215

55.600/2.1890 55.626/2.1900 55.220/2.1740 55.245/2.1750 54.839/2.1590 54.864/2.1600 54.458/2.1440 54.483/2.1450

1.530/0.0602

16.89/0.665

F23

F-18-2

1.530/0.0602

16.89/0.665

F23

F-18-3

1.530/0.0602

16.89/0.665

F23

F-18-4

1.530/0.0602

16.89/0.665

F23

F-18-5

5 Cam 1

Std. 2 3 4 5

1.565/0.0616

5C710S

57.137/2.2495 57.163/2.2505

ENGINE

VIN CYL

Bore x Stroke

351 (5.8) Windsor 351 (5.8) Windsor 351 (5.8) Windsor 351 (5.8) Windsor 351 (5.8) Windsor 351 (5.8) Windsor

C G H M Q R

4.00 x 3.50 4.00 x 3.50 4.00 x 3.50 4.00 x 3.50 4.00 x 3.50 4.00 x 3.50

8B831A Std. 10 20 30 40

8B831AO/S2 10 20 30 40

V8 V8 V8 V8 V8 V8

TORQUE SETTINGS Connecting Rod 40-45 ft.lbs/54-61 Nm Main Bearing 95-105 ft.lbs/129-142 Nm

Rod - High strength Aluminum Silicon material. 58.682/2.3103 61.633/2.4265 1.465/0.0577 .010/.0004 58.702/2.3111 61.653/2.4273 .066/.0026

18.18/0.716

F810

2176A IH

Rod - .002" oversize OD version of 8B831A. 58.682/2.3103 61.684/2.4285 1.617/0.0637 .010/.0004 58.702/2.3111 61.704/2.4293 (@ .010" u/s) .066/.0026

18.18/0.716

F810

9031A IH

194

FORD Type and Location

Standard Shaft Size

Housing Bore

Max. Bearing Thickness

Vertical Oil Clearance

Max. Overall Length

Material Code

Qty. Set

Bearing Shell No.

Engine Set No. Sizes Available

(Contâ&#x20AC;&#x2122;d.) Rod - To be superceded by 8B831A when stock exhausted. 58.682/2.3103 61.633/2.4265 1.465/0.0577 .010/.0004 58.702/2.3111 61.653/2.4273 .066/.0026 Rod - .002" oversize OD version of 8B831P. 58.682/2.3103 61.684/2.4285 1.617/0.0637 .002/.0001 58.702/2.3111 61.704/2.4293 (@ .010" u/s) .068/.0027 To be superceded by 8B831AO/S2 when stock exhausted.

18.18/0.716

F780

Main - High strength Aluminum Silicon material. 76.185/2.9994 81.082/3.1922 2.433/0.0958 .011/.0004 1,2,4,5 76.205/3.0002 81.102/3.1930 .076/.0030

21.26/0.837

1,2,4,5

21.26/0.837

F810

28.78/1.133

F810

28.78/1.133

F810

76.185/2.9994 81.082/3.1922 2.433/0.0958 76.205/3.0002 81.102/3.1930 3 (Fl) 76.185/2.9994 81.082/3.1922 2.433/0.0958 76.205/3.0002 81.102/3.1930 3 (Fl) 76.185/2.9994 81.082/3.1922 2.433/0.0958 76.205/3.0002 81.102/3.1930 Overflange length remains constant for standard and undersizes.

.011/.0004 .076/.0030 .011/.0004 .076/.0030 .011/.0004 .076/.0030

F810

Main - engines 1977-1997 - half groove. To be superceded by 5M1432A when stock exhausted. 1,2,4,5 76.185/2.9994 81.082/3.1922 2.433/0.0958 .011/.0004 21.26/0.837 F780 76.205/3.0002 81.102/3.1930 .076/.0030 1,2,4,5 76.185/2.9994 81.082/3.1922 2.433/0.0958 .011/.0004 21.26/0.837 F780 76.205/3.0002 81.102/3.1930 .076/.0030 3 (Fl) 76.185/2.9994 81.082/3.1922 2.433/0.0958 .011/.0004 28.78/1.133 F780 76.205/3.0002 81.102/3.1930 .076/.0030 3 (Fl) 76.185/2.9994 81.082/3.1922 2.433/0.0958 .011/.0004 28.78/1.133 F780 76.205/3.0002 81.102/3.1930 .076/.0030 Overflange length remains constant for standard and undersizes.

4 4 1 1

2176 IH 9031 IH

2177A U

3 (Fl) 3 (Fl)

76.185/2.9994 76.205/3.0002 76.185/2.9994 76.205/3.0002 76.185/2.9994 76.205/3.0002

81.082/3.1922 81.102/3.1930 81.082/3.1922 81.102/3.1930 81.082/3.1922 81.102/3.1930

.010" u/s shaft .020" u/s shaft .030" u/s shaft .040" u/s shaft

2.433/0.0958 .011/.0004 .076/.0030 2.433/0.0958 .011/.0004 .076/.0030 2.433/0.0958 .011/.0004 .076/.0030

21.26/0.837

F810

29.03/1.143

F810

29.03/1.143

F810

8B831P Std. 01 10 20 30 40

8B831PO/S2 10 20 30 40

5M1432A Std. 10 20 30 40

5207A L 2178A U 5209A L

2177 U 5207 L 2178 U 5209 L

Main - optional set to 5M1432A with +.010" overflange length increase for undersizes. *See below for dimensional information. 76.185/2.9994 81.082/3.1922 2.433/0.0958 .011/.0004 21.26/0.837 F810 4 2177A 1,2,4,5 76.205/3.0002 81.102/3.1930 .076/.0030 U 1,2,4,5

5M1432P Std. 01 10 20 30 40

5M5249A 10 20 30 40

5207A L 2170A U 5249A L

* DIMENSIONAL INFORMATION FOR 5M5249A Overall Width (Nominal) Increase in Width 1.143" +0.010" 1.143" +0.010" 1.143" +0.010" 1.143" +0.010"

Main - High Strength Aluminum Silicon material. For engines 1969-1976 - full groove. 76.185/2.9994 81.082/3.1922 2.433/0.0958 .011/.0004 21.26/0.837 F810 1,2,4,5 76.205/3.0002 81.102/3.1930 .076/.0030 3 (IH) 76.185/2.9994 81.082/3.1922 2.433/0.0958 .011/.0004 28.78/1.133 F810 76.205/3.0002 81.102/3.1930 .076/.0030 Overflange length remains constant for standard and undersizes. Main - engines 1969-1976 - full groove. To be superceded by 5M981A when stock exhausted. 1,2,4,5 76.185/2.9994 81.082/3.1922 2.433/0.0958 .011/.0004 21.26/0.837 F780 76.205/3.0002 81.102/3.1930 .076/.0030 3 (Fl) 76.185/2.9994 81.082/3.1922 2.433/0.0958 .011/.0004 28.78/1.133 F780 76.205/3.0002 81.102/3.1930 .076/.0030 Overflange length remains constant for standard and undersizes.

195

8 2

2177A IH 2178A IH

2177 IH 2178 IH

5M981A Std. 10 20 30 40

5M981P Std. 01 10 20 30 40

FORD Engine Set No. Sizes Available

Type and Location

Standard Shaft Size

Housing Bore

Max. Bearing Thickness

Vertical Oil Clearance

Max. Overall Length

Material Code

Qty. Set

Bearing Shell No.

42 (Cont’d.)

5M982A 10 20 30 40

76.185/2.9994 76.205/3.0002

.010" u/s shaft .020" u/s shaft .030" u/s shaft .040" u/s shaft

5M982P 10 20 30 40

81.082/3.1922 81.102/3.1930

2.433/0.0958 .011/.0004 .076/.0030

29.03/1.143

F810

2170A IH

* DIMENSIONAL INFORMATION FOR 5M982A Overall Width (Nominal) Increase in Width 1.143" +0.010" 1.143" +0.010" 1.143" +0.010" 1.143" +0.010"

Main - optional set to 5M981P with +0.010" overflange length increase for undersizes. To be superceded by 5M982A when stock exhausted. 76.185/2.9994 81.082/3.1922 2.433/0.0958 .011/.0004 21.26/0.837 F780 8 2177 1,2,4,5 76.205/3.0002 81.102/3.1930 .076/.0030 IH 3 (Fl)

76.185/2.9994 81.082/3.1922 76.205/3.0002 81.102/3.1930 Stock not available from fee warehouses.

2.433/0.0958 .011/.0004 .076/.0030

29.03/1.143

F780

2170 IH

* DIMENSIONAL INFORMATION FOR 5M982P Overall Width (Nominal) Increase in Width .010" u/s shaft 1.143" +0.010" .020" u/s shaft 1.143" +0.010" .030" u/s shaft 1.143" +0.010" .040’ u/s shaft 1.143" +0.010"

5C510S

Cam 1

Std. 2 3 4 5

52.845/2.0805 52.870/2.0815

55.982/2.2040 56.007/2.2050

1.530/0.0602

16.89/0.665

F23

F-18-1

52.464/2.0655 52.490/2.0665 52.083/2.0505 52.108/2.0515 51.702/2.0355 51.727/2.0365

55.600/2.1890 55.626/2.1900 55.220/2.1740 55.245/2.1750 54.839/2.1590 54.864/2.1600

1.530/0.0602

16.89/0.665

F23

F-18-2

1.530/0.0602

16.89/0.665

F23

F-18-3

1.530/0.0602

16.89/0.665

F23

F-18-4

51.321/2.0205 51.346/2.0215

54.458/2.1440 54.483/2.1450

1.530/0.0602

16.89/0.665

F23

F-18-5

ENGINE

VIN CYL

Bore x Stroke

351 (5.8) Modified 351 (5.8) Modified 400 (6.6) 400 (6.6) 400 (6.6)

G H

4.00 x 3.50 4.00 x 3.50 4.00 x 4.00 4.00 x 4.00 4.00 x 4.00

S Z

V8 V8 V8 V8 V8

TORQUE SETTINGS Connecting Rod 40-45 ft.lbs/54-61 Nm Main Bearing 35-45 ft.lbs/47-61 Nm (3/8" bolts only) Main Bearing 95-105 ft.lbs/129-142 Nm (1/2" bolts only)

Rod

8B927P

58.682/2.3103 58.702/2.3111

18.44/0.726

F780

2106C IH

Rod - .002" oversize OD version of 8B927P. 58.682/2.3103 61.931/2.4382 1.740/0.0685 .003/.0001 58.702/2.3111 61.948/2.4390 (@ .010" u/s) .066/.0026

18.18/0.716

F780

9051 IH

Main - High strength Aluminum Silicon material. 76.185/2.9994 81.082/3.1922 2.433/0.0958 .011/.0004 1,2,4,5 Std. 10 20 30 40 76.205/3.0002 81.102/3.1930 .076/.0030

21.26/0.837

F810

2177A U

21.26/0.837

F810

28.78/1.133

F810

28.78/1.133

F810

5207A L 2178A U 5209A L

Std. 01 10 20 30 40

8B927PO/S2 10 20 30 40

61.880/2.4362 61.897/2.4369

1.588/0.0625 .002/.0001 .065/.0026

5M1432A

1,2,4,5

196

.011/.0004 .076/.0030 .011/.0004 .076/.0030 .011/.0004 .076/.0030

FORD Type and Location

Standard Shaft Size

Housing Bore

Max. Bearing Thickness

Vertical Oil Clearance

Max. Overall Length

Material Code

Qty. Set

Bearing Shell No.

Engine Set No. Sizes Available

(Contâ&#x20AC;&#x2122;d.) Main - engines 1977-1982 half groove. To be superceded by 5M1432A when stock exhausted. 1,2,4,5 76.185/2.9994 81.082/3.1922 2.433/0.0958 .011/.0004 21.26/0.837 F780 76.205/3.0002 81.102/3.1930 .076/.0030

1,2,4,5

76.185/2.9994 76.205/3.0002

81.082/3.1922 81.102/3.1930

3 (Fl)

2.433/0.0958 .011/.0004 .076/.0030

76.185/2.9994 81.082/3.1922 2.433/0.0958 76.205/3.0002 81.102/3.1930 3 (Fl) 76.185/2.9994 81.082/3.1922 2.433/0.0958 76.205/3.0002 81.102/3.1930 Overflange length remains constant for standard and undersizes.

.011/.0004 .076/.0030 .011/.0004 .076/.0030

2177 U

21.26/0.837

F780

5207 L

28.78/1.133

F780

28.78/1.133

F780

2178 U 5209 L

76.185/2.9994 76.205/3.0002

81.082/3.1922 81.102/3.1930

2.433/0.0958 .011/.0004 .076/.0030

21.26/0.837

F810

5207A L

3 (Fl)

76.185/2.9994 76.205/3.0002 76.185/2.9994 76.205/3.0002

81.082/3.1922 81.102/3.1930 81.082/3.1922 81.102/3.1930

2.433/0.0958 .011/.0004 .076/.0030 2.433/0.0958 .011/.0004 .076/.0030

29.03/1.143

F810

29.03/1.143

F810

2170A U 5249A L

3 (Fl)

.010" u/s shaft .020" u/s shaft .030" u/s shaft .040" u/s shaft

5M1432P Std. 01 10 20 30 40

5M5249A 10 20 30 40

* DIMENSIONAL INFORMATION FOR 5M5249A Overall Width (Nominal) Increase in Width 1.143" +0.010" 1.143" +0.010" 1.143" +0.010" 1.143" +0.010"

Main - High Strength Aluminum Silicon material. For engines 1971-1976 - full groove. 76.185/2.9994 81.082/3.1922 2.433/0.0958 .011/.0004 21.26/0.837 F810 1,2,4,5 76.205/3.0002 81.102/3.1930 .076/.0030 3 (IH) 76.185/2.9994 81.082/3.1922 2.433/0.0958 .011/.0004 28.78/1.133 F810 76.205/3.0002 81.102/3.1930 .076/.0030 Overflange length remains constant for standard and undersizes.

8 2

3 (Fl)

76.185/2.9994 81.082/3.1922 2.433/0.0958 .011/.0004 76.205/3.0002 81.102/3.1930 .076/.0030 Overflange length remains constant for standard and undersizes.

28.78/1.133

F780

2177A IH 2178A IH

2177 IH

* DIMENSIONAL INFORMATION FOR 5M982A Overall Width (Nominal) Increase in Width 1.143" +0.010" 1.143" +0.010" 1.143" +0.010" 1.143" +0.010"

197

5M981A Std. 10 20 30 40

5M981P Std. 01 10 20 30 40

2178 IH

Main - optional set to 5M981A with +0.010" overflange length increase for undersizes. *See below for dimensional information. 76.185/2.9994 81.082/3.1922 2.433/0.0958 .011/.0004 21.26/0.837 F810 8 2177A 1,2,4,5 76.205/3.0002 81.102/3.1930 .076/.0030 IH 3 (Fl) 76.185/2.9994 81.082/3.1922 2.433/0.0958 .011/.0004 29.03/1.143 F810 2 2170A 76.205/3.0002 81.102/3.1930 .076/.0030 IH Stock not available from fee warehouses.

.010" u/s shaft .020" u/s shaft .030" u/s shaft .040" u/s shaft

5M982A 10 20 30 40

FORD Engine Set No. Sizes Available

Type and Location

Standard Shaft Size

Housing Bore

Max. Bearing Thickness

Vertical Oil Clearance

Max. Overall Length

Material Code

Qty. Set

Bearing Shell No.

43 (Cont’d.)

5M982P 10 20 30 40

76.185/2.9994 81.082/3.1922 76.205/3.0002 81.102/3.1930 Stock not available from fee warehouses.

2.433/0.0958 .011/.0004 .076/.0030

29.03/1.143

F780

2170 IH

5C710S

Cam 1

53.950/2.1240 53.975/2.1250

57.137/2.2495 57.163/2.2505

1.565/0.0616

16.89/0.665

F23

F-26-1

52.464/2.0655 52.489/2.0665

55.600/2.1890 55.626/2.1900

1.530/0.0602

16.89/0.665

F23

F-18-2

52.083/2.0505 52.108/2.0515 51.702/2.0355 51.727/2.0365 51.321/2.0205 51.346/2.0215

55.220/2.1740 55.245/2.1750 54.839/2.1590 54.864/2.1600 54.458/2.1440 54.483/2.1450

1.530/0.0602

16.89/0.665

F23

F-18-3

1.530/0.0602

16.89/0.665

F23

F-18-4

1.530/0.0602

16.89/0.665

F23

F-18-5

Std.

4 5

ENGINE

VIN CYL

370 (6.1) 429 (7.0) 429 (7.0) 429 (7.0) 429 (7.0) 429 (7.0) 460 (7.5) 460 (7.5) 460 (7.5) 460 (7.5) 460 (7.5)

C J K N Z A C G J L

V8 V8 V8 V8 V8 V8 V8 V8 V8 V8 V8

Bore x Stroke 4.05 x 3.59 4.36 x 3.59 4.36 x 3.59 4.36 x 3.59 4.36 x 3.59 4.36 x 3.59 4.36 x 3.85 4.36 x 3.85 4.36 x 3.85 4.36 x 3.85 4.36 x 3.85

TORQUE SETTINGS Connecting Rod 40-45 ft.lbs/54-61 Nm Main Bearing 95-105 ft.lbs/129-142 Nm

Rod

8B818P

63.480/2.4992 63.500/2.5000

22.00/0.866

F780

5210 IH

F780

5212 U/L

F780

5214 IH

Std. 10 20 30 40

67.366/2.6522 67.386/2.6530

1.927/0.0759 .012/.0005 .078/.0031

5M1039P

3 (Fl)

76.185/2.9994 81.082/3.1922 2.432/0.0957 .013/.0005 76.205/3.0002 81.102/3.1930 .079/.0031 Overflange length remains constant for standard and undersizes.

5M5218P 10 20 30 40

28.45/1.120

Main - optional set to 5M1039P with +0.010" overflange length increase for undersizes. *See below for dimensional information. 76.185/2.9994 81.082/3.1922 2.557/0.1007 .013/.0005 24.13/0.950 F780 8 5212 1,2,4,5 76.205/3.0002 81.102/3.1930 (@ .010" u/s) .079/.0031 U/L 3 (Fl)

76.185/2.9994 81.082/3.1922 76.205/3.0002 81.102/3.1930 Stock not available from fee warehouses.

.010" u/s shaft .020" u/s shaft .030" u/s shaft .040" u/s shaft

2.557/0.1007 .013/.0005 (@ .010" u/s) .079/.0031

28.70/1.130

F780

* DIMENSIONAL INFORMATION FOR 5M5218P Overall Width (Nominal) Increase in Width 1.130" +0.010" 1.130" +0.010" 1.130" +0.010" 1.130" +0.010"

198

5218 IH

FORD Type and Location

Standard Shaft Size

Max. Bearing Thickness

Housing Bore

Vertical Oil Clearance

Max. Overall Length

Material Code

Qty. Set

Bearing Shell No.

Engine Set No. Sizes Available

(Contâ&#x20AC;&#x2122;d.) Cam 1-5

53.950/2.1240 53.975/2.1250

57.137/2.2495 57.163/2.2505

1.570/0.0618

14.86/0.585

VIN CYL

401 (6.6) 475 (7.8) 477 (7.8) 534 (8.8)

5C1111S

F-30-1

Std.

Cam - Oversize OD Cam set. Align bore housing to 2.2645"/2.2655". 1-5 53.944/2.1238 57.518/2.2645 1.763/0.0694 .028/.0011 53.969/2.1248 57.544/2.2655 .127/.0050

ENGINE

F23

V8 V8 V8 V8

Bore x Stroke 4.125 x 3.750 4.500 x 3.750 4.500 x 3.750 4.500 x 4.200

16.00/0.630

F820

5C1766S

SH1766

Std.

TORQUE SETTINGS

Connecting Rod 60-65 ft.lbs Main Bearing 130-150 ft.lbs 1966-81 engines Main Bearing 150-165 ft.lbs 1958-65 engines

Rod - for engines 1961-81 and 1960 with crankshafts C1TE-6303B, C1TE-6303C and C2TZ-6303A or B on No.4 counterweight only. 68.814/2.7092 73.741/2.9032 2.443/0.0962 .033/.0013 22.66/0.892 F780 16 CB615P 68.834/2.7100 73.761/2.9040 .099/.0039 To be discontinued when stock exhausted. Main 1,2,4,5

79.365/3.1246 79.385/3.1254

84.267/3.3176 84.287/3.3184

2.428/0.0956 .038/.0015 .099/.0039

28.07/1.105

79.365/3.1246 84.267/3.3176 79.385/3.1254 84.287/3.3184 To be discontinued when stock exhausted.

2.433/0.0958 .023/.0009 .089/.0035

32.33/1.273

F780

MB1821P

66.091/2.6020 66.116/2.6030

1.600/0.0630 .025/.0010 .128/.0050

17.27/0.680

F23

SH369

60.198/2.3700 63.449/2.4980 60.223/2.3710 63.475/2.4990 To be discontinued when stock exhausted.

1.600/0.0630 .025/.0010 .128/.0050

17.27/0.680

F23

SH370

3 (Fl)

Cam 1

62.840/2.4740 62.865/2.4750

2,3,4,5

ENGINE

VIN CYL

Bore x Stroke

420 (6.9) Diesel 445 (7.3) Diesel

1 M

4.00 x 4.18 4.11 x 4.18

V8 V8

F780

8B615P Std. 10 20 30

5M443P

MB1820P

Std. 10 20 30

5C369S Std.

TORQUE SETTINGS

Connecting Rod 38 ft.lbs Step 1 (6.9L Diesel) Connecting Rod 38 ft.lbs Step 1 (7.3L Diesel) Connecting Rod 51 ft.lbs Step 2 (7.3L Diesel) Connecting Rod 54 ft.lbs Step 2 (6.9L Diesel) Main Bearing 75 ft.lbs Step 1 (6.9L Diesel) Main Bearing 75 ft.lbs Step 1 (7.3L Diesel) Main Bearing 95 ft.lbs Step 2 (6.9L Diesel) Main Bearing 95 ft.lbs Step 2 (7.3L Diesel)

Rod 63.449/2.4980 63.474/2.4990

68.339/2.6905 68.364/2.6915

2.420/0.0952 .053/.0021 .104/.0041

22.56/0.888

79.319/3.1228 79.339/3.1236

84.206/3.3152 84.231/3.3162

2.410/0.0949 .053/.0021 .124/.0049

22.23/0.875

79.319/3.1228 84.206/3.3152 2.410/0.0949 .053/.0021 79.339/3.1236 84.231/3.3162 .124/.0049 Overflange length remains constant for standard and undersizes.

28.70/1.130

F780

2935 U/L

Main 1,2,4,5 3 (Fl)

Cam 1 2,3,4,5

F780

8B1327P

5241 IH

Std. 01 10 20 30

2934 U/L

Std. 10 20 30

53.315/2.0990 53.340/2.1000

56.655/2.2305 56.693/2.2320

1.640/0.0647

20.07/0.790

F23

IN-17-1

53.315/2.0990 53.340/2.1000

56.655/2.2305 56.693/2.2320

1.640/0.0647

16.64/0.655

F23

IN-17-2

5M1596P

5C1092S Std.

199

FORD Engine Set No. Sizes Available

Type and Location

Standard Shaft Size

Housing Bore

Max. Bearing Thickness

Vertical Oil Clearance

ENGINE

VIN CYL

Bore x Stroke

415 (6.8) 415 (6.8)

S Y

3.551 x 4.160 3.551 x 4.160

V10 V10

Max. Overall Length

Material Code

Qty. Set

Bearing Shell No.

TORQUE SETTINGS Connecting Rod 30-33 ft.lbs + 90-120 deg Main Bearing Consult Service Manual

Rod

10B1442P

52.984/2.0860 53.002/2.0867

20.96/0.825

F780

5636 IH

20.96/0.825

F780

9080 IH

19.26/0.758

F810

18.35/0.722

F810

7293A U 7296A L

20.06/0.790

F810

2.92/0.115

F817

Balance Shaft - Split type repair Inserts. 26.937/1.0605 29.119/1.1464 1.083/0.0426 .015/.0006 A,B,C 26.962/1.0615 29.144/1.1474 .081/.0032

14.70/0.579

F810

5195A U

26.937/1.0605 26.962/1.0615

29.119/1.1464 29.144/1.1474

1.083/0.0426 .015/.0006 .081/.0032

14.70/0.579

F810

5196A L

B,C

26.937/1.0605 26.962/1.0615

29.119/1.1464 29.144/1.1474

1.083/0.0426 .015/.0006 .081/.0032

14.70/0.579

F810

5197A L

14.70/0.579

F810

5194A L

Std. .25 .50

10B1442POS2 .25 .50 .75 1.0

6M7296A

56.866/2.2388 56.886/2.2396

1.928/0.0759 .012/.0005 .063/.0025

Rod - .002" oversize OD version of 10B1442P. 52.984/2.0860 56.917/2.2408 2.053/0.0808 .012/.0005 53.002/2.0867 56.937/2.2416 (@0.25mm u/s) .063/.0025 Main 1

Std. .25 .50 .75 1.0 1-6

67.480/2.6567 67.506/2.6577 67.480/2.6567 67.506/2.6577

72.400/2.8504 72.421/2.8512 72.400/2.8504 72.421/2.8512

2.443/0.0962 .008/.0003 .071/.0028 2.443/0.0962 .008/.0003 .071/.0028

2-6

67.480/2.6567 72.400/2.8504 2.443/0.0962 .008/.0003 67.506/2.6577 72.421/2.8512 .071/.0028 6 76.750/3.0216 96.750/3.8090 (OD) (ID) 77.000/3.0315 97.000/3.8189 Set includes three thrustwashers. Use on No. 6 position.

3BS5196A Std. .25

7C5197LA Std. .25

7C5197RA Std. .25

Cam Tower - Split type repair inserts for LEFT cylinder bank. 26.937/1.0605 29.119/1.1464 1.083/0.0426 .015/.0006 0-6 26.962/1.0615 29.144/1.1474 .081/.0032

7296A U 7296T U/L

0,2,3,4, 6

26.937/1.0605 26.962/1.0615

29.119/1.1464 29.144/1.1474

1.083/0.0426 .015/.0006 .081/.0032

14.70/0.579

F810

5195A U

2,5

26.937/1.0605 26.962/1.0615

29.119/1.1464 29.144/1.1474

1.083/0.0426 .015/.0006 .081/.0032

14.70/0.579

F810

5197A U

Cam Tower - Split type repair inserts for RIGHT cylinder bank. 26.937/1.0605 29.119/1.1464 1.083/0.0426 .015/.0006 0-6 26.962/1.0615 29.144/1.1474 .081/.0032

14.70/0.579

F810

5194A L

0-6

14.70/0.579

F810

5195A U

26.937/1.0605 26.962/1.0615

ENGINE 445 (7.3) Powerstroke Engine Turbo Diesel 445 (7.3) Powerstroke Engine Turbo Diesel 445 (7.3) Powerstroke Engine Turbo Diesel

29.119/1.1464 29.144/1.1474

1.083/0.0426 .015/.0006 .081/.0032

VIN CYL

Bore x Stroke

4.11 x 4.18

TORQUE SETTINGS Connecting Rod 52 ft.lbs Step 1 Connecting Rod 80 ft.lbs Step 2 Main Bearing 75 ft.lbs Step 1 Main Bearing 95 ft.lbs Step 2

Rod

8B1633P Std. 10 20 30 40

5M2034P

Main 1,2,4,5

Std. 10 20 30 40 3 (Fl)

5C1092S

Cam 1

Std. 2,3,4,5

63.449/2.4980 63.475/2.4990

68.339/2.6905 68.364/2.6915

2.419/0.0952 .038/.0015 .114/.0045

22.56/0.888

F780

5246 IH

79.319/3.1228 79.339/3.1236

84.206/3.3152 84.231/3.3162

2.410/0.0949 .046/.0018 .117/.0046

23.70/0.933

F780

5247 U/L

79.319/3.1228 79.339/3.1236

84.206/3.3152 84.231/3.3162

2.410/0.0949 .046/.0018 .117/.0046

31.45/1.238

F780

5248 U/L

53.315/2.0990 53.340/2.1000

56.655/2.2305 56.693/2.2320

1.640/0.0647

20.07/0.790

F23

IN-17-1

53.315/2.0990 53.340/2.1000

56.655/2.2305 56.693/2.2320

1.640/0.0647

16.64/0.655

F23

IN-17-2

200

FORD PERFORMANCE FORD PERFORMANCE ENGINE INDEX Engine Disp.

Notation

VIN

Cyl.

1500cc (1.5)......... Escort/Cortina/Lotus Twin Cam 1558cc (1.6)......... Escort/Cortina/Lotus Twin Cam 1600cc (1.6)......... BDA,BDD ... (BD Series) 1700cc (1.7)......... BDB,BDC ... (BD Series) 140 2254cc (2.3)... Duratec 221 (3.6) ............... 255 (4.2) ............... 260 (4.3) ............... 281 (4.6) ............... 289 (4.7) ............... Type and Location

Standard Shaft Size

ENGINE

L4 L4 V8 V8 V8 V8 V8 V8

1 1 3 4 4 4 5 4

Max. Bearing Thickness

Housing Bore

VIN CYL

1600cc (1.6) BDA,BDD ... (BD Series) 1700cc (1.7) BDB,BDC ... (BD Series)

Year Line Engine Disp.

01-06 62-63 80-82 62-65 91-06 63-68

Notation

302 (5.0) ............... 330 (5.4) ............... 351 (5.8) ............... 351 (5.8) ............... 351 (5.8) ............... 370 (6.1) ............... 400 (6.6) ............... 429 (7.0) ............... 460 (7.5) ...............

Vertical Oil Clearance

Bore x Stroke

Max. Overall Length

VIN

V8 V8 V8 V8 V8 V8 V8 V8 V8

Cleveland Modified Windsor

Material Code

Qty. Set

Cyl.

Bearing Shell No.

Year Line 68-01 97-06 70-74 75-82 77-98 79-91 71-82 68-98 68-98

4 6 7 8 9 10 8 10 10

Engine Set No. Sizes Available

TORQUE SETTINGS

L4 L4

Rod 49.200/1.9370 49.213/1.9375

52.927/2.0837 52.940/2.0842

1.840/0.0724 .034/.0013 .076/.0030

19.17/0.755

F781

Rod - Bearings are .0005" thinner per half to give .001" extra clearance for standard sized cranks. 49.200/1.9370 52.927/2.0837 1.827/0.0719 .059/.0023 19.17/0.755 F781 8 49.213/1.9375 52.940/2.0842 .101/.0040 Main 1-5

53.988/2.1255 54.000/2.1260

57.683/2.2710 57.696/2.2715

1.831/0.0721 .021/.0008 .062/.0024

25.52/1.005

F780

Main - Bearings are .0005" thinner per half to give .001" extra clearance for standard sized cranks. 53.988/2.1255 57.683/2.2710 1.818/0.0716 .046/.0018 25.52/1.005 F780 10 1-5 54.000/2.1260 57.696/2.2715 .087/.0034 Thrust 3

59.436/2.3400 59.690/2.3500

74.498/2.9330 74.752/2.9430

ENGINE

2.36/0.093

VIN CYL

1500cc (1.5) Escort/Cortina/Lotus Twin Cam 1558cc (1.6) Escort/Cortina/Lotus Twin Cam

Bore x Stroke

F250

1060H IH 1060HX IH 2152H IH 2152HX IH 2152T IH

4B1060H Std. 001,010,020

4B1060HX Std.

5M2152H Std. 001 010 020

5M2152HX Std.

1T113S Std. +.005

TORQUE SETTINGS

L4 L4

Rod 49.200/1.9370 49.212/1.9375

52.896/2.0825 52.908/2.0830

1.830/0.0720 .024/.0009 .064/.0025

22.35/0.880

F781

Rod - Bearings are .0005" thinner per half to give .001" extra clearance for standard sized cranks. 49.200/1.9370 52.896/2.0825 1.817/0.0715 .049/.0019 22.35/0.880 F781 8 49.212/1.9375 52.908/2.0830 .089/.0035 Main 1-5

53.988/2.1255 54.000/2.1260

57.683/2.2710 57.696/2.2715

1.831/0.0721 .021/.0008 .062/.0024

25.52/1.005

F780

Main - Bearings are .0005" thinner per half to give .001" extra clearance for standard sized cranks. 1-5 53.988/2.1255 57.683/2.2710 1.818/0.0716 .046/.0018 25.52/1.005 F780 10 54.000/2.1260 57.696/2.2715 .087/.0034 Thrust 3

59.436/2.3400 59.690/2.3500

74.498/2.9330 74.752/2.9430

Cam Tower - Split Cam type insert. 25.400/1.0000 28.587/1.1255 25.412/1.0005 28.800/1.1339 25.400/1.0000 25.412/1.0005

28.587/1.1255 28.600/1.1260

2.36/0.093

F250

5216H U/L 5216HX U/L 2152H IH 2152HX IH 2152T IH

1.584/0.0624 .007/.0003 .048/.0019

19.18/0.755

F23

5808 IH

1.584/0.0624 .007/.0003 .048/.0019

12.82/0.505

F23

5809 IH

201

4B603H Std. 001 010 020

4B603HX Std.

5M2152H Std. 001 010 020

5M2152HX Std.

1T113S Std. +.005

10C5808 Std.

FORD PERFORMANCE Engine Set No. Sizes Available

Type and Location

Standard Shaft Size

ENGINE

Housing Bore

VIN CYL

140 2254cc (2.3) Duratec

Max. Bearing Thickness

Vertical Oil Clearance

Bore x Stroke

Max. Overall Length

Material Code

Qty. Set

Bearing Shell No.

8170H IH

TORQUE SETTINGS

87.5mm x 94mm

Rod

4B8170H

49.980/1.9677 50.000/1.9685

Std. .025 .25

4B8170HX Std.

VIN CYL

221 (3.6) 255 (4.2) 260 (4.3) 289 (4.7) 302 (5.0)

Std. 01 09 10 11 20

1B634HD Std. 01 10

1B634HX Std.

1B634HXD Std.

V8 V8 V8 V8 V8

Std.

TORQUE SETTINGS Connecting Rod 19-24 ft.lbs Main Bearing 60-70 ft.lbs

Rod - Dowel hole In cap half only. May also be used In engines without doweled conrod. 53.919/2.1228 56.871/2.2390 1.458/0.0574 .016/.0006 18.44/0.726 F781 53.939/2.1236 56.891/2.2398 .072/.0028

2131HD U/L

18.44/0.726

Rod - Bearings are .0005" thinner per half to give .001" extra clearance for standard sized cranks. 53.919/2.1228 56.871/2.2390 1.445/0.0569 .041/.0016 18.44/0.726 F780 2 53.939/2.1236 56.891/2.2398 .097/.0038

2131HX U/L

Rod - Dowel hole In cap half only. May also be used In engines without doweled conrod. Bearings are .0005" thinner per half to give .001" extra clearance for standard sized cranks. 53.919/2.1228 56.871/2.2390 1.445/0.0569 .041/.0016 18.44/0.726 F781 2 2131HXD 53.939/2.1236 56.891/2.2398 .097/.0038 U/L 62.006/2.4412 62.027/2.4420 62.006/2.4412 62.027/2.4420

2.431/0.0957 .016/.0006 .072/.0028 2.431/0.0957 .016/.0006 .072/.0028

22.48/0.885

F780

28.78/1.133

F780

Main - Bearings are .0005" thinner per half to give .001" extra clearance for standard sized cranks. 1,2,4,5 57.104/2.2482 62.006/2.4412 2.418/0.0952 .040/.0016 22.48/0.885 F780 8 57.125/2.2490 62.027/2.4420 .096/.0038 57.104/2.2482 57.125/2.2490

62.006/2.4412 62.027/2.4420

2.418/0.0952 .040/.0016 .096/.0038

2132H U/L 2133H U/L 2132HX U/L

28.78/1.133

F780

2133HX U/L

Cam - Heavy duty Aluminum/Tin material. 52.845/2.0805 55.984/2.2041 1.544/0.0608 .025/.0010 1 52.870/2.0815 56.010/2.2051 .127/.0050

17.02/0.670

F830

5610C

52.464/2.0655 52.489/2.0665

55.601/2.1890 55.626/2.1900

1.544/0.0608 .025/.0010 .127/.0050

17.02/0.670

F830

5616C

52.083/2.0505 52.108/2.0515 51.702/2.0355 51.727/2.0365 51.321/2.0205 51.346/2.0215

55.220/2.1740 55.245/2.1750 54.839/2.1590 54.864/2.1600 54.458/2.1440 54.483/2.1450

1.544/0.0608 .025/.0010 .127/.0050 1.544/0.0608 .025/.0010 .127/.0050 1.544/0.0608 .025/.0010 .127/.0050

17.02/0.670

F830

5617C

17.02/0.670

F830

5618C

17.02/0.670

F830

5619C

Cam - for engines with all constant housing bores at 2.2041"-2.2051" (SVO engines). 52.845/2.0805 55.984/2.2041 1.544/0.0608 .025/.0010 17.02/0.670 F830 1-5 52.870/2.0815 56.010/2.2051 .127/.0050

5610C

Std.

3.500 x 2.875 3.680 x 3.000 3.800 x 2.870 4.000 x 2.870 4.000 x 3.000

8170HX IH

2131H U/L

5C1763S

F781

3 (Fl)

5C1321S

16.80/0.661

F780

Main - 3/4 grooved set. 1,2,4,5 57.104/2.2482 Std. 01 09 10 11 20 57.125/2.2490 3 (Fl) 57.104/2.2482 57.125/2.2490

Std.

Bore x Stroke

Rod - Bearing shell does not contain dowel hole. 53.919/2.1228 56.871/2.2390 1.458/0.0574 .016/.0006 53.939/2.1236 56.891/2.2398 .072/.0028

5M590H

5M590HX

1.500/0.0591 .026/.0010 .052/.0020

Rod - Bearings are .0005" thinner per half to give .001" extra clearance for standard sized cranks. 49.980/1.9677 53.025/2.0876 1.487/0.0585 .052/.0020 16.80/0.661 F781 8 50.000/1.9685 53.045/2.0884 .077/.0030

ENGINE

1B634H

53.025/2.0876 53.045/2.0884

202

FORD PERFORMANCE Type and Location

Standard Shaft Size

Max. Bearing Thickness

Housing Bore

Vertical Oil Clearance

Max. Overall Length

Material Code

Qty. Set

Bearing Shell No.

Engine Set No. Sizes Available

(Contâ&#x20AC;&#x2122;d.) Cam - Babbitt material. 52.845/2.0805 1 52.870/2.0815

55.982/2.2040 56.007/2.2050

1.530/0.0602

16.89/0.665

F23

F-18-1

52.464/2.0655 52.490/2.0665

55.600/2.1890 55.626/2.1900

1.530/0.0602

16.89/0.665

F23

F-18-2

52.083/2.0505 52.108/2.0515 51.702/2.0355 51.727/2.0365 51.321/2.0205 51.346/2.0215

55.220/2.1740 55.245/2.1750 54.839/2.1590 54.864/2.1600 54.458/2.1440 54.483/2.1450

1.530/0.0602

16.89/0.665

F23

F-18-3

1.530/0.0602

16.89/0.665

F23

F-18-4

1.530/0.0602

16.89/0.665

F23

F-18-5

ENGINE

5C510S Std.

VIN CYL

281 (4.6)

Bore x Stroke

TORQUE SETTINGS

90.2mm x 90mm

Connecting Rod 23 ft.lbs/31 Nm + 90 deg Main Bearing 24 ft.lbs/33 Nm + 90 deg

Rod 52.984/2.0860 53.002/2.0867

56.866/2.2388 56.886/2.2396

1.928/0.0759 .012/.0005 .063/.0025

20.96/0.825

F781

Rod - Bearings are .0005" thinner per half to give .001" extra clearance for standard sized cranks. 52.984/2.0860 56.866/2.2388 1.915/0.0754 .037/.0015 20.96/0.825 F781 2 53.002/2.0867 56.886/2.2396 .088/.0035 Main - For engines 1996 on (VIN 6,X only). 67.480/2.6567 72.400/2.8504 2.443/0.0962 .008/.0003 1 67.506/2.6577 72.421/2.8512 .071/.0028

19.26/0.758

2-5

20.06/0.790

F780

20.06/0.790

F780

2.92/0.115

F817

1-5

67.480/2.6567 67.506/2.6577 67.480/2.6567 67.506/2.6577

72.400/2.8504 72.421/2.8512 72.400/2.8504 72.421/2.8512

2.443/0.0962 .008/.0003 .071/.0028 2.443/0.0962 .008/.0003 .071/.0028

76.750/3.0216 96.750/3.8090 77.000/3.0315 97.000/3.8189 Set includes three thrustwashers. Use on No. 5 position.

F780

5636H U/L 5636HX U/L 5644H U

2.92/0.115

Small End - not bored, single pieces. 21.994/0.8659 24.016/0.9455 21.999/0.8661 24.041/0.9465

ENGINE

23.75/0.935

Std.

5M7296H Std. .025 .25

7296T U/L

5M7296HX Std.

7296T

F100

RB4113

RB4113 Semi

VIN CYL

330 (5.4)

1B1442HX

5645H U 5646H L

Main - For engines 1996 on (VIN 6,X only). Bearings are .0005" thinner per half to give .001" extra clearance for standard sized cranks. U 67.480/2.6567 72.400/2.8504 2.430/0.0957 .032/.0013 19.26/0.758 F780 1 5644HX 67.506/2.6577 72.421/2.8512 .096/.0038 1 2-5 67.480/2.6567 72.400/2.8504 2.430/0.0957 .032/.0013 20.06/0.790 F780 4 5645HX 67.506/2.6577 72.421/2.8512 .096/.0038 U 1-5 67.480/2.6567 72.400/2.8504 2.430/0.0957 .032/.0013 20.06/0.790 F780 5 5646HX 67.506/2.6577 72.421/2.8512 .096/.0038 L 76.750/3.0216 96.750/3.8090 77.000/3.0315 97.000/3.8189 Set includes three thrustwashers. Use on No. 5 position.

1B1442H Std. .025 .25

Bore x Stroke

TORQUE SETTINGS

90.2mm x 105.8mm Connecting Rod 23 ft.lbs/31 Nm + 90 deg Main Bearing 24 ft.lbs/33 Nm + 90 deg

Rod 52.984/2.0860 53.002/2.0867

56.866/2.2388 56.886/2.2396

1.928/0.0759 .012/.0005 .063/.0025

20.96/0.825

F781

203

5636H U/L 5636HX U/L

1B1442H Std. .025 .25

1B1442HX Std.

FORD PERFORMANCE Engine Set No. Sizes Available

Type and Location

Max. Overall Length

Material Code

Qty. Set

Bearing Shell No.

2.443/0.0962 .008/.0003 .071/.0028

19.26/0.758

F780

5644H U

2.443/0.0962 .008/.0003 .071/.0028

20.06/0.790

F780

5645H U

67.480/2.6567 72.400/2.8504 2.443/0.0962 .008/.0003 67.506/2.6577 72.421/2.8512 .071/.0028 5 76.750/3.0216 96.750/3.8090 77.000/3.0315 97.000/3.8189 Set includes three thrustwashers. Use on No. 5 position.

20.06/0.790

F780

2.92/0.115

F817

5646H L 7296T U/L

Standard Shaft Size

Housing Bore

67.480/2.6567 67.506/2.6577

72.400/2.8504 72.421/2.8512

67.480/2.6567 67.506/2.6577

72.400/2.8504 72.421/2.8512

Max. Bearing Thickness

Vertical Oil Clearance

(Contâ&#x20AC;&#x2122;d.) 5M7296H

Main 1

Std. .025 .25 2-5 1-5

5M7296HX Std.

Main - Bearings are .0005" thinner per half to give .001" extra clearance for standard sized cranks. 67.480/2.6567 72.400/2.8504 2.430/0.0957 .032/.0013 19.26/0.758 F780 1 U 67.506/2.6577 72.421/2.8512 .096/.0038 2-5

67.480/2.6567 72.400/2.8504 2.430/0.0957 67.506/2.6577 72.421/2.8512 1-5 67.480/2.6567 72.400/2.8504 2.430/0.0957 67.506/2.6577 72.421/2.8512 76.750/3.0216 96.750/3.8090 77.000/3.0315 97.000/3.8189 Set includes three thrustwashers. Use on No. 5 position.

RB4113 Semi

VIN CYL

351 (5.8) Cleveland

Std. 01 10

5M1010H Std. 01 10 20

Main - 3/4 grooved set. 69.809/2.7484 1,2,4,5 69.830/2.7492

Std.

5C1763S Std.

5C710C Std.

69.809/2.7484 69.830/2.7492

F780

20.06/0.790

F780

5645HX U 5646HX L 7296T

F100

RB4113

23.75/0.935

Bore x Stroke 4.000 x 3.500

TORQUE SETTINGS Connecting Rod 40-45 ft.lbs Main Bearing 95-105 ft.lbs

Rod - Bearing shell does not contain dowel hole. 58.682/2.3103 61.880/2.4362 1.585/0.0624 .013/.0005 58.702/2.3111 61.897/2.4369 .060/.0024

3 (Fl)

5M1010HX

20.06/0.790

2.92/0.115

Small End - not bored, single pieces. 21.994/0.8659 24.016/0.9455 21.999/0.8661 24.041/0.9465

ENGINE

1B927H

.032/.0013 .096/.0038 .032/.0013 .096/.0038

5644HX 1

18.44/0.726

F780

2106H U/L

74.719/2.9417 74.740/2.9425

2.443/0.0962 .003/.0001 .071/.0028

22.35/0.880

F780

2107H U/L

74.719/2.9417 74.740/2.9425

2.443/0.0962 .003/.0001 .071/.0028

28.40/1.118

F780

2108H U/L

Main - Bearings are .0005" thinner per half to give .001" extra clearance for standard sized cranks. 69.809/2.7484 74.719/2.9417 2.431/0.0957 .028/.0011 22.35/0.880 F780 8 1,2,4,5 69.830/2.7492 74.740/2.9425 .096/.0038 3 (Fl) 69.809/2.7484 74.719/2.9417 2.431/0.0957 .028/.0011 28.40/1.118 F780 2 69.830/2.7492 74.740/2.9425 .096/.0038 Cam - for engines with all constant housing bores at 2.2041"-2.2051" (SVO engines). 52.845/2.0805 55.984/2.2041 1.544/0.0608 .025/.0010 17.02/0.670 F830 1-5 52.870/2.0815 56.010/2.2051 .127/.0050

2107HX U/L 2108HX U/L

5610C

Cam - Performance cam bearing. 1 53.950/2.1240 57.137/2.2495 53.975/2.1250 57.163/2.2505 2 52.464/2.0655 55.600/2.1890 52.489/2.0665 55.626/2.1900 3 52.083/2.0505 55.220/2.1740 52.108/2.0515 55.245/2.1750

1.565/0.0616

16.89/0.665

F23

FP-26-1

1.530/0.0602

16.89/0.665

F23

FP-18-2

1.530/0.0602

16.89/0.665

F23

FP-18-3

51.702/2.0355 51.727/2.0365

54.839/2.1590 54.864/2.1600

1.530/0.0602

16.89/0.665

F23

FP-18-4

51.321/2.0205 51.346/2.0215

54.458/2.1440 54.483/2.1450

1.530/0.0602

16.89/0.665

F23

FP-18-5

204

FORD PERFORMANCE Type and Location

Standard Shaft Size

Max. Bearing Thickness

Housing Bore

Vertical Oil Clearance

Max. Overall Length

Material Code

Qty. Set

Bearing Shell No.

Engine Set No. Sizes Available

(Contâ&#x20AC;&#x2122;d.) Cam - Babbitt material. 53.950/2.1240 1 53.975/2.1250

57.137/2.2495 57.163/2.2505

1.565/0.0616

16.89/0.665

F23

F-26-1

52.464/2.0655 52.489/2.0665

55.600/2.1890 55.626/2.1900

1.530/0.0602

16.89/0.665

F23

F-18-2

52.083/2.0505 52.108/2.0515 51.702/2.0355 51.727/2.0365 51.321/2.0205 51.346/2.0215

55.220/2.1740 55.245/2.1750 54.839/2.1590 54.864/2.1600 54.458/2.1440 54.483/2.1450

1.530/0.0602

16.89/0.665

F23

F-18-3

1.530/0.0602

16.89/0.665

F23

F-18-4

1.530/0.0602

16.89/0.665

F23

F-18-5

ENGINE

VIN CYL

351 (5.8) Modified 400 (6.6)

V8 V8

Bore x Stroke 4.000 x 3.500 4.000 x 4.000

TORQUE SETTINGS

18.44/0.726

Main - 3/4 grooved set. 1,2,4,5 76.185/2.9994 76.205/3.0002

3 (Fl) 3 (Fl)

76.185/2.9994 76.205/3.0002 76.185/2.9994 76.205/3.0002 76.185/2.9994 76.205/3.0002

F780

81.082/3.1922 81.102/3.1930

2.433/0.0958 .011/.0004 .076/.0030

21.26/0.837

81.082/3.1922 81.102/3.1930 81.082/3.1922 81.102/3.1930 81.082/3.1922 81.102/3.1930

2.433/0.0958 .011/.0004 .076/.0030 2.433/0.0958 .011/.0004 .076/.0030 2.433/0.0958 .011/.0004 .076/.0030

21.26/0.837

F780

28.78/1.133

F780

28.78/1.133

F780

Main - Bearings are .0005" thinner per half to give .001" extra clearance for standard sized cranks. 76.185/2.9994 81.082/3.1922 2.420/0.0953 .036/.0014 21.26/0.837 F780 4 1,2,4,5 76.205/3.0002 81.102/3.1930 .101/.0040 1,2,4,5

Std. 01 10

2177H U

Std. 01 10

2177HX U

F780

28.78/1.133

F780

28.78/1.133

F780

Cam - Performance cam bearing. 53.950/2.1240 57.137/2.2495 1 53.975/2.1250 57.163/2.2505

1.565/0.0616

16.89/0.665

F23

FP-26-1

1.530/0.0602

16.89/0.665

F23

FP-18-2

1.530/0.0602

16.89/0.665

F23

FP-18-3

1.530/0.0602

16.89/0.665

F23

FP-18-4

1.530/0.0602

16.89/0.665

F23

FP-18-5

Cam - Babbitt material. 53.950/2.1240 1 53.975/2.1250 2 52.464/2.0655 52.489/2.0665 3 52.083/2.0505 52.108/2.0515 4 51.702/2.0355 51.727/2.0365 5 51.321/2.0205 51.346/2.0215

57.137/2.2495 57.163/2.2505 55.600/2.1890 55.626/2.1900 55.220/2.1740 55.245/2.1750 54.839/2.1590 54.864/2.1600 54.458/2.1440 54.483/2.1450

1.565/0.0616

16.89/0.665

F23

F-26-1

1.530/0.0602

16.89/0.665

F23

F-18-2

1.530/0.0602

16.89/0.665

F23

F-18-3

1.530/0.0602

16.89/0.665

F23

F-18-4

1.530/0.0602

16.89/0.665

F23

F-18-5

Std.

5C710C Std.

55.600/2.1890 55.626/2.1900 55.220/2.1740 55.245/2.1750 54.839/2.1590 54.864/2.1600 54.458/2.1440 54.483/2.1450

5M1432HX

5207HX L 2178HX U 5209HX L

52.464/2.0655 52.489/2.0665 52.083/2.0505 52.108/2.0515 51.702/2.0355 51.727/2.0365 51.321/2.0205 51.346/2.0215

5M1432H

5207H L 2178H U 5209H L

21.26/0.837

3 (Fl)

81.082/3.1922 81.102/3.1930 81.082/3.1922 81.102/3.1930 81.082/3.1922 81.102/3.1930

1B927H

2106H U/L

2.420/0.0953 .036/.0014 .101/.0040 2.420/0.0953 .036/.0014 .101/.0040 2.420/0.0953 .036/.0014 .101/.0040

3 (Fl)

76.185/2.9994 76.205/3.0002 76.185/2.9994 76.205/3.0002 76.185/2.9994 76.205/3.0002

Connecting Rod 40-45 ft.lbs Main Bearing 95-105 ft.lbs

Rod - Bearing shell does not contain dowel hole. 58.682/2.3103 61.880/2.4362 1.585/0.0624 .013/.0005 58.702/2.3111 61.897/2.4369 .060/.0024

1,2,4,5

5C710S Std.

205

FORD PERFORMANCE Engine Set No. Sizes Available

Type and Location

Standard Shaft Size

ENGINE

VIN CYL

351 (5.8) Windsor

5M1432H Std. 01 10

5M1432HX Std.

5C1321S Std.

Main - 3/4 grooved set. 76.185/2.9994 1,2,4,5 76.205/3.0002

5M1039H Std. 01 10

Std.

5C1111S Std.

5C1766S Std.

Material Code

Qty. Set

Bearing Shell No.

TORQUE SETTINGS Connecting Rod 40-45 ft.lbs Main Bearing 95-105 ft.lbs

81.082/3.1922 81.102/3.1930

2.433/0.0958 .011/.0004 .076/.0030

21.26/0.837

F780

2177H U

2.433/0.0958 .011/.0004 .076/.0030

21.26/0.837

F780

5207H L

3 (Fl)

76.185/2.9994 76.205/3.0002

81.082/3.1922 81.102/3.1930

2.433/0.0958 .011/.0004 .076/.0030

28.78/1.133

F780

2178H U

3 (Fl)

76.185/2.9994 76.205/3.0002

81.082/3.1922 81.102/3.1930

2.433/0.0958 .011/.0004 .076/.0030

28.78/1.133

F780

5209H L

2177HX U

1,2,4,5

76.185/2.9994 76.205/3.0002

81.082/3.1922 81.102/3.1930

2.420/0.0953 .036/.0014 .101/.0040

21.26/0.837

F780

5207HX L

3 (Fl)

76.185/2.9994 76.205/3.0002

81.082/3.1922 81.102/3.1930

2.420/0.0953 .036/.0014 .101/.0040

28.78/1.133

F780

2178HX U

3 (Fl)

76.185/2.9994 76.205/3.0002

81.082/3.1922 81.102/3.1930

2.420/0.0953 .036/.0014 .101/.0040

28.78/1.133

F780

5209HX L

Cam - Heavy duty Aluminum/Tin material. 52.845/2.0805 55.984/2.2041 1.544/0.0608 .025/.0010 1 52.870/2.0815 56.010/2.2051 .127/.0050

17.02/0.670

F830

5610C

52.464/2.0655 52.489/2.0665

55.601/2.1890 55.626/2.1900

1.544/0.0608 .025/.0010 .127/.0050

17.02/0.670

F830

5616C

52.083/2.0505 52.108/2.0515

55.220/2.1740 55.245/2.1750

1.544/0.0608 .025/.0010 .127/.0050

17.02/0.670

F830

5617C

51.702/2.0355 51.727/2.0365 51.321/2.0205 51.346/2.0215

54.839/2.1590 54.864/2.1600 54.458/2.1440 54.483/2.1450

1.544/0.0608 .025/.0010 .127/.0050 1.544/0.0608 .025/.0010 .127/.0050

17.02/0.670

F830

5618C

17.02/0.670

F830

5619C

VIN CYL V8 V8 V8

Bore x Stroke 4.050 x 3.590 4.360 x 3.590 4.360 x 3.850

TORQUE SETTINGS Connecting Rod 40-45 ft.lbs Main Bearing 95-105 ft.lbs

Rod - Bearing shell does not contain dowel hole. 63.480/2.4992 67.366/2.6522 1.925/0.0758 .016/.0006 63.500/2.5000 67.386/2.6530 .070/.0028 Main - 3/4 grooved set. 76.185/2.9994 1,2,4,5 76.205/3.0002 3 (Fl)

5M1039HX

Bore x Stroke 4.000 x 3.500

Max. Overall Length

81.082/3.1922 81.102/3.1930

370 (6.1) 429 (7.0) 460 (7.5)

Std. 01 10

Vertical Oil Clearance

76.185/2.9994 76.205/3.0002

ENGINE

1B818H

Max. Bearing Thickness

1,2,4,5

Housing Bore

76.185/2.9994 76.205/3.0002

22.00/0.866

F780

5210H U/L

81.082/3.1922 81.102/3.1930

2.432/0.0957 .013/.0005 .079/.0031

24.13/0.950

F780

5212H U/L

81.082/3.1922 81.102/3.1930

2.432/0.0957 .013/.0005 .079/.0031

28.45/1.120

F780

5214H IH

Main - Bearings are .0005" thinner per half to give .001" extra clearance for standard sized cranks. 1,2,4,5 76.185/2.9994 81.082/3.1922 2.419/0.0952 .038/.0015 24.13/0.950 F780 8 76.205/3.0002 81.102/3.1930 .104/.0041 3 (Fl) 76.185/2.9994 81.082/3.1922 2.419/0.0952 .038/.0015 28.45/1.120 F780 2 76.205/3.0002 81.102/3.1930 .104/.0041 Cam - Babbitt material. 53.950/2.1240 57.137/2.2495 1-5 53.975/2.1250 57.163/2.2505

1.570/0.0618

5212HX U/L 5214HX IH

14.86/0.585

F23

F-30-1

Cam - for engines with all constant housing bores at 2.2645"-2.2655". 53.944/2.1238 57.518/2.2645 1.763/0.0694 .028/.0011 16.00/0.630 1-5 53.969/2.1248 57.544/2.2655 .127/.0050

F820

SH1766

206

GEO GEO ENGINE INDEX Engine Disp. 61 993cc (1.0)....... 61 993cc (1.0)....... 79 1295cc (1.3)..... 92 1471cc (1.5)..... 92 1471cc (1.5)..... 1588cc (1.6).........

Notation

VIN

Cyl.

Suzuki G10T, Turbo Suzuki G10 Suzuki G13BA Isuzu 4XC1 Isuzu 4XC1T, Turbo Storm (4XE1)

2 6 9 7 9 RF77

L3 L3 L4 L4 L4 L4

Year Line Engine Disp. 89-91 89-97 95-97 89-89 89-89 90-93

1 1 2 3 3 5

1588cc (1.6)......... 98 1588cc (1.6)..... 98 1588cc (1.6)..... 98 1588cc (1.6)..... 110 1788cc (1.8)...

Notation

VIN

Cyl.

Storm GSi (4XE1) (Toyota 4AGE - Prizm) (Toyota 4AFE - Prizm) Suzuki G16KC/KV (Toyota 7AFE)

RT77 5 6 U 8

L4 L4 L4 L4 L4

Year Line 90-91 90-92 89-97 89-97 93-97

5 4 4 6 7

GEO MODEL INDEX Model

CID

Liter

METRO - XFI PRIZM

61 79 61 79 61 98

993 1295 993 1295 993 1588

1.0 1.3 1.0 1.3 1.0 1.6

PRIZM - GSI

110 98

1788 1588

PRIZM - LSI

1588

METRO METRO - LSI

Type and Location

Standard Shaft Size

Max. Bearing Thickness

Housing Bore

ENGINE

Description

Suzuki G10 Suzuki G13BA Suzuki G10 Suzuki G13BA Suzuki G10 (Toyota 4AFE Prizm) 1.8 (Toyota 7AFE) 1.6 (Toyota 4AGE Prizm) 1.6 (Toyota 4AFE Prizm)

VIN CYL

61 993cc (1.0) Suzuki G10T Turbo 2 61 993cc (1.0) Suzuki G10 6

L3 L3

Years

Model

CID

Liter

Description

STORM

110 92 92 98

1788 1471 1471 1588

1.8 1.5 1.5 1.6

STORM - 2+2

1588

1.6

93-96 90-92

STORM - GSI

1588

1.6

90-97

TRACKER

110 98

1788 1588

1.8 1.6

1588

1.6

(Toyota 7AFE) Isuzu 4XC1 Isuzu 4XC1T (Toyota 4AFE Prizm) (Toyota 4AFE Prizm) (Toyota 4AGE Prizm) (Toyota 7AFE) (Toyota 4AFE Prizm) Suzuki G16KC/KV

89-97 95 89-96 95-97 90-94 89-97

PRIZM - LSI SPECTRUM

Vertical Oil Clearance

Bore x Stroke 74mm x 77mm 74mm x 77mm

Max. Overall Length

Material Code

Qty. Set

Bearing Shell No.

Years 93-97 89 89 90-93 90-93 90-91 93 94-97 89-95

Engine Set No. Sizes Available

TORQUE SETTINGS

Connecting Rod 24-27 ft.lbs/33-37 Nm Main Bearing 36-41 ft.lbs/49-55 Nm

Rod

Main 1-4

41.983/1.6529 41.999/1.6535

44.998/1.7716 45.018/1.7724

1.490/0.0587 .020/.0008 .068/.0027

18.00/0.709

44.983/1.7710 44.998/1.7716

48.998/1.9291 49.018/1.9298

2.000/0.0787 .020/.0008 .068/.0027

18.00/0.709

F780

3B8336

8336 IH

Std. .25 .50 .75 1.0

8337 U/L

Std. .25 .50 .75 1.0

4M8337

Thrust 52.250/2.0571 67.900/2.6732 (Nominal I.D.) (Nominal O.D.) Note: Set includes two pieces, use on No. 3 position. Required with 4M8337 main set.

2.52/0.099

ENGINE

VIN CYL

Bore x Stroke

79 1295cc (1.3) Suzuki G13BA

74mm x 77mm

F250

8337T IH

1T8337 Std.

TORQUE SETTINGS

Connecting Rod 24-27 ft.lbs/33-37 Nm Main Bearing 36-41 ft.lbs/49-55 Nm

Rod

Main 1-5

41.984/1.6529 41.999/1.6535

44.998/1.7716 45.018/1.7724

1.490/0.0587 .020/.0008 .068/.0027

18.00/0.709

44.983/1.7710 44.998/1.7716

48.998/1.9291 49.018/1.9298

2.000/0.0787 .020/.0008 .068/.0027

18.00/0.709

F780

4B8336

8336 IH

Std. .25 .50 .75 1.0

8337 U/L

Std. .25 .50 .75 1.0

5M8337

Thrust 52.250/2.0571 67.900/2.6732 (Nominal I.D.) (Nominal O.D.) Note: Set includes two pieces, use on No. 3 position. Required with 5M8337 main set.

ENGINE

VIN CYL

92 1471cc (1.5) Isuzu 4XC1 7 92 1471cc (1.5) Isuzu 4XC1T Turbo 9

L4 L4

2.52/0.099

Bore x Stroke 77mm x 79mm 77mm x 79mm

F250

8337T IH

1T8337 Std.

TORQUE SETTINGS

Connecting Rod 24-27 ft.lbs/33-37 Nm Main Bearing 61-69 ft.lbs/83-93 Nm

Rod 39.929/1.5720 39.945/1.5726

42.980/1.6921 43.000/1.6929

1.506/0.0593

17.00/0.669

207

F780

1870 IH

4B1870 Std. .25 .50 .75

GEO Engine Set No. Sizes Available

Type and Location

Max. Overall Length

Material Code

Qty. Set

Bearing Shell No.

2.010/0.0791 .018/.0007 .089/.0035

17.00/0.669

F780

1869 U/L

54.700/2.1535 69.700/2.7441 54.900/2.1614 69.900/2.7520 Note: Set includes two pieces, use on No. 3 position. Required with 5M1869 main set.

2.20/0.087

F250

1869T IH

Housing Bore

47.918/1.8865 47.938/1.8873

51.976/2.0463 52.000/2.0472

Main 1-5

Std. .25 .50 .75

1T1869 Std.

Vertical Oil Clearance

Thrust 3

ENGINE 98 1588cc (1.6) (Toyota 4AGE Prizm) 98 1588cc (1.6) (Toyota 4AFE Prizm)

4B1710 Std. .25 .50 .75 1.0

4B1780 Std. .25 .50 .75 1.0

5M1695

Std.

Bore x Stroke

81mm x 77mm

TORQUE SETTINGS Connecting Rod 36 ft.lbs/49 Nm Main Bearing 44 ft.lbs/60 Nm

43.000/1.6929 43.024/1.6939

1.498/0.0590 .005/.0002 .069/.0027

17.09/0.673

F810

1710A IH

Rod - for type 5 only. 41.986/1.6530 42.000/1.6535

45.001/1.7717 45.024/1.7726

1.490/0.0587 .020/.0008 .084/.0033

17.09/0.673

F780

1780 IH

47.985/1.8892 48.000/1.8898

52.020/2.0480 52.050/2.0492

2.004/0.0789 .012/.0005 .084/.0033

19.90/0.783

F810

1695A L

47.985/1.8892 48.000/1.8898

52.020/2.0480 52.050/2.0492

2.004/0.0789 .012/.0005 .084/.0033

19.90/0.783

F810

1704A U

2.49/0.098

F861

1695T U/L

Main 1-5 1-5

2T1695

VIN CYL

Rod - for type 6 only. 39.985/1.5742 40.000/1.5748

Std. .25 .50 .75 1.0

Max. Bearing Thickness

(Contâ&#x20AC;&#x2122;d.) 5M1869

Standard Shaft Size

Thrust 3

53.500/2.1063 65.750/2.5886 53.750/2.1161 66.000/2.5984 Note: Set includes four pieces, use on No. 3 position. Required with 5M1695 main set.

ENGINE

VIN CYL

Bore x Stroke

1588cc (1.6) Storm (4XE1) 1588cc (1.6) Storm GSi (4XE1)

RF77 L4 RT77 L4

80mm x 79mm 80mm x 79mm

TORQUE SETTINGS Connecting Rod 24-27 ft.lbs/33-37 Nm Main Bearing 61-69 ft.lbs/83-95 Nm

Rod

4B1870

39.929/1.5720 39.945/1.5726

17.00/0.669

F780

1870 IH

Main - for engines 6/90-1993 (2.044" shaft size). 1,2,3,4, 51.915/2.0439 55.976/2.2038 2.009/0.0791 .020/.0008 51.938/2.0448 55.989/2.2043 .082/.0032 5

17.13/0.674

F780

1867 U/L

Main - for engines 1990-5/90. 47.918/1.8865 51.976/2.0463 1-5 47.938/1.8873 52.000/2.0472

2.010/0.0791 .018/.0007 .089/.0035

17.00/0.669

F780

1869 U/L

Thrust 3

59.000/2.3228 73.596/2.8975 59.000/2.3228 73.850/2.9075 Note: Set includes two pieces, use on No. 3 position. Required with 5M1867 main set.

2.21/0.087

F817

1867T IH

Thrust 3

2.20/0.087

F250

1869T IH

Std. .25 .50 .75

5M1867 Std. .25 .50

5M1869 Std. .25 .50 .75

1T1867 Std.

1T1869 Std.

42.980/1.6921 43.000/1.6929

1.506/0.0593

54.700/2.1535 69.700/2.7441 54.900/2.1614 69.900/2.7520 Note: Set includes two pieces, use on No. 3 position. Required with 5M1869 main set.

ENGINE

VIN CYL

Bore x Stroke

98 1588cc (1.6) Suzuki G16KC/KV

75mm x 90mm

TORQUE SETTINGS Connecting Rod 24-27 Ft.lbs/33-37 Nm Main Bearing 37-41 ft.lbs/50-55 Nm

Rod

4B8340 Std. .25 .50 .75 1.0

43.983/1.7316 44.000/1.7323

47.000/1.8504 47.020/1.8512

1.495/0.0589 .010/.0004 .076/.0030

208

18.10/0.713

F780

8340 IH

GEO Type and Location

Standard Shaft Size

Max. Bearing Thickness

Housing Bore

Vertical Oil Clearance

Max. Overall Length

Material Code

Qty. Set

Bearing Shell No.

Engine Set No. Sizes Available

(Contâ&#x20AC;&#x2122;d.) Main 1-5

51.982/2.0465 52.000/2.0472

56.000/2.2047 56.018/2.2054

2.005/0.0789 .010/.0004 .072/.0028

Thrust 3

59.436/2.3400 74.498/2.9330 59.690/2.3500 74.752/2.9430 Note: Set includes two pieces, use on No. 3 position. Required with 5M8339 main set.

18.10/0.713

2.52/0.099

ENGINE

VIN CYL

Bore x Stroke

110 1788cc (1.8) (Toyota 7AFE)

81mm x 85.5mm

F780

F817

8339 U/L 8339T IH

5M8339 Std. .25 .50 .75 1.0

1T8339 Std.

TORQUE SETTINGS

Connecting Rod 29-36 ft.lbs/39-49 Nm Main Bearing 52-63 ft.lbs/71-85 Nm

Rod 47.988/1.8893 48.000/1.8898

51.000/2.0079 51.024/2.0088

1.490/0.0587 .020/.0008 .082/.0032

17.10/0.673

Main - Half groove 1-5 47.985/1.8892 48.000/1.8898 1-5 47.985/1.8892 48.000/1.8898

52.020/2.0480 52.050/2.0492 52.020/2.0480 52.050/2.0492

2.004/0.0789 .012/.0005 .084/.0033 2.004/0.0789 .012/.0005 .084/.0033

19.90/0.783 19.90/0.783

F810

53.500/2.1063 65.750/2.5886 53.750/2.1161 66.000/2.5984 Note: Set includes four pieces, use on No. 3 position. Required with 5M1695 main sets.

2.49/0.098

F861

Thrust 3

209

F780

F810

1680 IH 1695A L 1704A U 1695T U/L

4B1680 Std. .25 .50 .75 1.0

5M1695 Std. .25 .50 .75 1.0

2T1695 Std.

GMC GMC ENGINE INDEX Engine Disp. 119 (1.9) ............... 122 (2.0) ............... 134 (2.2) ............... 134 (2.2) ............... 134 (2.2) ............... 134 (2.2) ............... 151 2474cc (2.5)... 151 2474cc (2.5)... 153 (2.5) ............... 169 2770cc (2.8)... 173 (2.8) ............... 173 (2.8) ............... 200 (3.3) ............... 211 3460cc (3.5)... 229 (3.8) ............... 229 (3.8) ............... 230 (3.8) ............... 230 (3.8) ............... 231 (3.8) ............... 231 (3.8) ............... 250 (4.1) ............... 250 (4.1) ............... 250 (4.1) ............... 250 (4.1) ............... 250 (4.1) ............... 250 (4.1) ............... 250 (4.1) ............... 256 (4.2) ............... 262 (4.3) ............... 262 (4.3) ............... 262 (4.3) ............... 262 (4.3) ............... 262 (4.3) ............... 262 (4.3) ............... 267 (4.4) ............... 283 ....................... 292 (4.8) ............... 292 (4.8) ............... 292 (4.8) ............... 292 (4.8) ............... 294 (4.8) ............... 305 (5.0) ............... 305 (5.0) ............... 305 (5.0) ............... 305 (5.0) ............... 305 (5.0) ............... 305 (5.0) ............... 305 (5.0) ............... 307 (5.0) ............... 307 (5.0) ............... 307 (5.0) ............... 307 (5.0) ............... 307 (5.0) ............... 307 (5.0) ............... 307 (5.0) ............... 323 (5.3) ............... 323 (5.3) ............... 323 (5.3) ............... 323 (5.3) ............... 323 (5.3) ............... 325 (5.3) ...............

Notation

VIN

Cyl.

Isuzu G200Z, OHC OHV OHV OHV OHV Isuzu C223,Diesel Pontiac Eng. Pontiac Eng.

A Y 4 5 H S A E

L4 L4 L4 L4 L4 L4 L4 L4 L4 L4 V6 V6 V6 L5 V6 V6 L6 L6 V6 V6 L6 L6 L6 L6 L6 L6 L6 L6 V6 V6 V6 V6 V6 V6 V8 V8 L6 L6 L6 L6 V8 V6 V8 V8 V8 V8 V8 V8 V8 V8 V8 V8 V8 V8 V8 V8 V8 V8 V8 V8 V8

8 B R M 6 9 K S 2 A

Buick Eng. Buick Eng.

C D L N P Q S B N W X Z Z J

Turbo

S S T V (305C) F G H M Q U A B E F H P X B M P T Z B

Year Line Engine Disp. 82-85 83-84 94-00 00-02 03-03 84-85 91-93 85-91 63-65 04-06 82-85 86-93 78-79 04-06 83-84 80-82 63-67 68-69 79-79 78-84 66-67 71-72 72-84 71-72 70-70 68-69 73-75 02-05 90-91 85-86 92-02 96-06 85-96 91-93 80-82 67-67 66-67 68-72 74-74 73-89 99-05 60-67 81-86 80-81 79-95 96-00 76-76 77-79 70-70 70-70 68-69 72-73 71-71 71-71 73-73 05-05 05-05 03-04 99-05 02-05 06-06

1 2 3 3 3 4 5 5 6 7 8 8 9 10 9 9 11 11 12 12 11 11 11 11 11 11 11 13 14 14 14 14 14 14 15 16 17 17 17 17 18 19 15 15 15 15 15 15 15 15 15 15 15 15 15 18 18 18 18 18 18

325 (5.3) ............... 325 (5.3) ............... 325 5328cc (5.3)... 327 (5.4) ............... 327 (5.4) ............... 350 (5.7) ............... 350 (5.7) ............... 350 (5.7) ............... 350 (5.7) ............... 350 (5.7) ............... 350 (5.7) ............... 350 (5.7) ............... 350 (5.7) ............... 350 (5.7) ............... 350 (5.7) ............... 350 (5.7) ............... 350 (5.7) ............... 350 (5.7) ............... 350 (5.7) ............... 350 (5.7) ............... 351 (5.8) ............... 351 (5.8) ............... 364 (6.0) ............... 364 (6.0) ............... 379 ....................... 379 (6.2) ............... 379 (6.2) ............... 395 (6.5) ............... 395 (6.5) ............... 395 (6.5) ............... 395 (6.5) ............... 395 (6.5) ............... 396 (6.5) ............... 396 (6.5) ............... 400 (6.6) ............... 400 (6.6) ............... 400 (6.6) ............... 400 (6.6) ............... 401 ....................... 402 (6.6) ............... 402 (6.6) ............... 402 (6.6) ............... 402 (6.6) ............... 432 ....................... 454 (7.4) ............... 454 (7.4) ............... 454 (7.4) ............... 454 (7.4) ............... 454 (7.4) ............... 454 (7.4) ............... 454 (7.4) ............... 454 (7.4) ............... 454 (7.4) ............... 478 ....................... 478 ....................... 496 (8.1) ............... 500 (8.2) ............... 500 (8.2) ............... 637 ....................... 637 .......................

Notation

VIN

Cyl.

(L59)

M T Z

V8 V8 V8 V8 V8 V8 V8 V8 V8 V8 V8 V8 V8 V8 V8 V8 V8 V8 V8 V8 V6 V6 V8 V8 V6 V8 V8 V8 V8 V8 V8 V8 V8 V8 V8 V8 V8 V8 V6 V8 V8 V8 V8 V6 V8 V8 V8 V8 V8 V8 V8 V8 V8 V6 V6 V8 V8

06-06 06-06 05-06 67-67 68-68 71-71 69-84 72-75 72-72 73-96 82-82 74-86 79-88 83-84 80-88 96-02 74-76 74-74 73-75 78-81 64-67 60-73 05-06 99-06 73-74 82-93 82-93 92-02 94-95 94-99 94-99 99-02 68-69 68-68 75-75 74-80 76-76 80-80 60-73 71-72 70-72 71-71 72-75 73-74 98-99 70-71 96-00 74-75 87-97 76-80 72-89 73-77 73-75 64-74 62-74 01-06 79-91

18 18 18 16 15 15 15 15 15 15 15 15 15 20 15 15 15 15 15 20 19 19 18 18 19 21 21 21 21 21 21 21 22 22 23 23 23 23 19 22 22 22 22 19 22 22 22 22 22 22 22 22 22 19 19 24 25

79-91

V8 V8

66-73 66-73

26 26

Oldsmobile Eng.,Diesel

Oldsmobile Eng.,Diesel (D351),Diesel (351C/E/M)

E B E H J K K L M N P R V W Y Z N U

Diesel Diesel Turbo,Diesel Diesel Turbo,Diesel Diesel (L65), Turbo,Diesel

C J F P S Y F E Y M R U X

(401M) E K U B E J L N S W Y Z (D478/DH478),Diesel (478M) G Detroit Diesel (Fuel Pincher),Diesel Detroit Diesel (Fuel Pincher), Turbo,Diesel D637 / DH637,Diesel Gas

Year Line

GMC MODEL INDEX Model

1000 SERIES 1500 SERIES 2500 SERIES C15/C1500 PICKUP

CID 283 350 230 305 230 305 305 230 250 292 262

Liter

Description

5.7 3.8 5.0 (305C) 3.8 5.0 (305C) 5.0 (305C) 3.8 4.1 4.8 4.3

Years 67 82-88 64-65 61-65 64-65 61-65 61-63 66 66-84 66-80 85-86

Model C15/C1500 PICKUP

210

CID 305 305 307 327 350 350 379 396 400 402 454

Liter

Description

5.0 (305C) 5.0 5.0 5.4 5.7 5.7 Oldsmobile Eng. 6.2 6.5 6.6 6.6 7.4

Years 66-67 76-86 68-73 67-68 69-86 78-81 82-86 68-69 76-80 70-72 73-80

GMC GMC MODEL INDEX (Cont’d.) Model C15/C1500 PICKUP BIG TEN

C15/C1500 SUBURBAN

C1500 PICKUP

C1500 PICKUP SIERRA

C1500 PICKUP SIERRA XC

C1500 SUBURBAN C25/C2500 PICKUP

C25/C2500 SUBURBAN

C2500 PICKUP

C2500 PICKUP SIERRA

C2500 PICKUP SIERRA XC

CID

Liter

Description

Years

250 292 305 350 400 454

4.1 4.8 5.0 5.7 6.6 7.4

77-80 78-80 78-80 77-80 80 77-80

250 292 305 307 350 350 379 396 402 454 262 305 350 379 395

4.1 4.8 5.0 5.0 5.7 5.7 Oldsmobile Eng. 6.2 6.5 6.6 7.4 4.3 5.0 5.7 6.2 6.5

68-80 68-74 76-86 68-73 69-86 78-81 82-86 68-69 70-72 73-80 88-98 88-99 88-99 88 98

262 305 350 379 395

4.3 5.0 5.7 6.2 6.5

89-97 89-97 89-97 89-93 94-97

262 305 350 379 395 350 395 230 250 292 262 305 305 307 327 350 379 396 400 402 454

4.3 5.0 5.7 6.2 6.5 5.7 6.5 3.8 4.1 4.8 4.3 5.0 (305C) 5.0 5.0 5.4 5.7 6.2 6.5 6.6 6.6 7.4

89-97 89-97 89-97 89-93 94-97 92-99 94-99 66 66-84 66-86 85-86 66-67 77-86 68-73 67-68 69-86 82-86 68-69 76-79 70-72 73-86

250 292 305 307 327 350 350 379 396 400 402 454 262 305 350 379 395 454

4.1 4.8 5.0 5.0 5.4 5.7 5.7 Oldsmobile Eng. 6.2 6.5 6.6 6.6 7.4 4.3 5.0 5.7 6.2 6.5 7.4

68-74 68-86 77-86 68-73 68 69-86 80 82-86 68 78-80 70-72 74-86 88 88-99 88-00 88 99-00 99-00

262 305 350 379 395 454

4.3 5.0 5.7 6.2 6.5 7.4

89-95 89-97 89-98 89-93 92-98 91-98

262

4.3

89-93

Model C2500 PICKUP SIERRA XC

C2500 SUBURBAN

C35/C3500 PICKUP

C3500 PICKUP

C3500 PICKUP - HD CHASSIS CAB C3500 PICKUP SIERRA

C3500 PICKUP SIERRA XC

CABALLERO

CANYON CANYON - SL CANYON - SLE CANYON - SLT CANYON - WT CANYON - Z71 FLEET CANYON - Z71 SL CANYON - Z71 SLE CANYON - Z85 SL CANYON - Z85 SLE ENVOY ENVOY - DENALI ENVOY - SLE ENVOY - SLT ENVOY - XL ENVOY - XL DENALI ENVOY - XL SLE ENVOY - XL SLT ENVOY - XUV

211

CID

Liter

Description

Years

305 350 379 395 454 350 379 395 454 250 292 305 307 327 350 379 396 400 402 454 350 379 395 454

5.0 5.7 6.2 6.5 7.4 5.7 6.2 6.5 7.4 4.1 4.8 5.0 5.0 5.4 5.7 6.2 6.5 6.6 6.6 7.4 5.7 6.2 6.5 7.4

89-97 89-98 89-93 93-98 91-98 92-99 93 93-99 92-99 67-80 67-86 78-86 68-73 67-68 69-86 82-86 68-69 76-79 70-72 73-86 88-00 88 98-00 88-00

395 496

6.5 8.1

01-02 01-02

350 379 395 454

5.7 6.2 6.5 7.4

89-97 89-93 92-97 89-97

350 379 395 454 200 229 231 262 267 305 350 350 169 211 169 169 211 211 169 211 169 211 169 211 169 211 169 211 169 211 256 323 325 256 256 256 323 323 325 256 323 256 323 256 323

5.7 6.2 6.5 7.4 3.3 3.8 3.8 Buick Eng. 4.3 4.4 5.0 5.7 5.7 Oldsmobile Eng. 2.8 3.5 2.8 2.8 3.5 3.5 2.8 3.5 2.8 3.5 2.8 3.5 2.8 3.5 2.8 3.5 2.8 3.5 4.2 5.3 5.3 4.2 4.2 4.2 5.3 5.3 5.3 4.2 5.3 4.2 5.3 4.2 5.3

89-97 89-93 92-97 89-97 78-79 80-84 78-84 85-87 80-82 78-87 78-79 83-84 04 04 06 06 06 06 06 06 05 05 05 05 05 05 05 05 05 05 02-04 05 06 05 05 02-04 03-04 05 06 05 05 05 05 04 04

2770 3460 2770 2770 3460 3460 2770 3460 2770 3460 2770 3460 2770 3460 2770 3460 2770 3460

GMC GMC MODEL INDEX (Cont’d.) Model ENVOY - XUV SLE ENVOY - XUV SLT G1000 SERIES G15/G1500 VAN

G15/G1500 VAN RALLY

G15/G1500 VAN SAVANA G15/G1500 VAN VANDURA

G25/G2500 VAN

G25/G2500 VAN CARGO G25/G2500 VAN RALLY

G25/G2500 VAN SAVANA G25/G2500 VAN VANDURA

G25/G2500 VAN - XT G35/G3500 VAN

CID

Liter

Description

Years

256 323 256 323 230 230 250 262 305 307 327 350

4.2 5.3 4.2 5.3 3.8 3.8 4.1 4.3 5.0 5.0 5.4 5.7

05 05 05 05 64-66 67 67-83 98 83-98 70-71 67 71-98

230 250 262 305 307 350 400 454

3.8 4.1 4.3 5.0 5.0 5.7 6.6 7.4

68-69 68-84 85-93 77-93 68-73 72-93 79 79

262 305 350

4.3 5.0 5.7

96-97 96-97 96-97

230 250 262 305 307 350 400 230 250 262 305 307 327 350 395

3.8 4.1 4.3 5.0 5.0 5.7 6.6 3.8 4.1 4.3 5.0 5.0 5.4 5.7 6.5

68-69 68-84 85-95 77-95 68-73 72-94 76 67 67 98 98 70-72 67 71-98 98

395

6.5

230 250 292 262 305 307 350 379 395 400 454

3.8 4.1 4.8 4.3 5.0 5.0 5.7 6.2 6.5 6.6 7.4

68-69 68-84 74-78 85-95 77-95 68-73 71-95 83-93 94-95 75-80 75-76

305 350 395

5.0 5.7 6.5

96-97 96-97 96

230 250 292 262 305 307 350 379 395 400 395 292 262 327 350 379 395 400 454

3.8 4.1 4.8 4.3 5.0 5.0 5.7 6.2 6.5 6.6 6.5 4.8 4.3 5.4 5.7 6.2 6.5 6.6 7.4

68-69 68-84 74-78 85-95 77-95 68-73 70-95 83-93 94-95 75-80 97 74-78 94-96 67 71-98 83-93 94-98 76-80 76-98

Model G35/G3500 VAN RALLY

CID

Liter

Description

Years

250 292 262 350 379 395 400 454

4.1 4.8 4.3 5.7 6.2 6.5 6.6 7.4

71-74 76-78 95-96 71-96 83-93 94-96 75-80 89-96

262 350 395 454

4.3 5.7 6.5 7.4

96 96-97 96-97 96-97

262 350 395 454

4.3 5.7 6.5 7.4

96 96 96 96

250 292 262 305 350 379 395 400 454 JIMMY 250 292 262 305 307 350 379 400 454 JIMMY - ENVOY 262 K15/K1500 PICKUP 230 250 292 262 305 307 327 350 379 396 400 454 K15/K1500 SUBURBAN 250 292 305 307 327 350 379 396 400 402 K1500 PICKUP 262 305 350 379 K1500 PICKUP SIERRA 262 305 350 379 395 K1500 PICKUP SIERRA XC 262 305 350 379 395 K1500 SUBURBAN 350 395

4.1 4.8 4.3 5.0 5.7 6.2 6.5 6.6 7.4 4.1 4.8 4.3 5.0 5.0 5.7 6.2 6.6 7.4 4.3 3.8 4.1 4.8 4.3 5.0 5.0 5.4 5.7 6.2 6.5 6.6 7.4 4.1 4.8 5.0 5.0 5.4 5.7 6.2 6.5 6.6 6.6 4.3 5.0 5.7 6.2

71-84 76-78 85-96 81 71-96 83-93 94-96 75-80 89-96 70-82 73 95-01 77-87 70-72 70-91 82-91 75-79 73-76 98-01 66-69 66-84 66-80 85-86 76-86 68-70 67-68 69-86 82-86 68-69 75-80 76-80 68-80 68 76-85 68-73 68 69-86 82-86 68 75-79 70-72 88 88-99 88-99 88

4.3 5.0 5.7 6.2 6.5

89-98 89-98 89-98 89-93 94-98

4.3 5.0 5.7 6.2 6.5 5.7 6.5

89-98 89-98 89-98 89-93 94-98 92-99 94-99

G35/G3500 VAN SAVANA

G35/G3500 VAN SPECIAL

G35/G3500 VAN VANDURA

212

GMC GMC MODEL INDEX (Cont’d.) Model K25/K2500 PICKUP

CID

250 292 262 305 307 327 350 379 396 400 454 K25/K2500 SUBURBAN 250 292 305 307 327 350 379 396 400 454 K2500 PICKUP 262 305 350 379 395 454 K2500 PICKUP SIERRA 262 305 350 379 395 454 K2500 PICKUP SIERRA XC 262 305 350 379 395 454 K2500 SUBURBAN 350 395 454 K35/K3500 PICKUP 250 292 307 327 350 379 396 400 402 454 K3500 PICKUP 350 379 395 454 K3500 PICKUP SIERRA 350 379 395 454 K3500 PICKUP SIERRA XC 350 379 395 454 P15/P1500 VAN 230 250 292 454 P25/P2500 VAN 250 292 307 350 379 454 P35/P3500 VAN 250

Liter

Description

Years

4.1 4.8 4.3 5.0 5.0 5.4 5.7 6.2 6.5 6.6 7.4 4.1 4.8 5.0 5.0 5.4 5.7 6.2 6.5 6.6 7.4 4.3 5.0 5.7 6.2 6.5 7.4

67-80 67-86 85 77-78 68-70 67-68 69-86 82-86 68-69 75-80 73-78 68-74 68-86 77-78 68-73 68 69-86 82-86 68 75-80 77 88 88-99 88-00 88 98-00 98-00

4.3 5.0 5.7 6.2 6.5 7.4

89-95 89-95 89-97 89-93 92-97 91-97

4.3 5.0 5.7 6.2 6.5 7.4 5.7 6.5 7.4 4.1 4.8 5.0 5.4 5.7 6.2 6.5 6.6 6.6 7.4 5.7 6.2 6.5 7.4

89-93 89-95 89-97 89-93 92-97 91-97 92-99 94-99 92-99 68-74 68-86 68-73 67-68 69-86 82-86 68-69 77-80 70-71 73-86 88-00 88 98-00 88-00

5.7 6.2 6.5 7.4

89-97 89-93 92-97 89-97

5.7 6.2 6.5 7.4 3.8 4.1 4.8 7.4 4.1 4.8 5.0 5.7 6.2 7.4 4.1

89-97 89-93 93-97 89-97 67-69 68-74 67-80 79 66-74 67-89 68-69 70-89 82-89 70-71 66-74

Model P35/P3500 VAN

P35/P3500 VAN MOTOR HOME PB1000 SERIES PB15 SERIES PB25 SERIES PB2500 SERIES R1500 PICKUP

R1500 SUBURBAN R2500 PICKUP

R2500 SUBURBAN R3500 PICKUP

S15 JIMMY

S15 PICKUP

SAFARI SAFARI - XT SAVANA 1500

SAVANA 1500 - LS SAVANA 1500 - LT SAVANA 2500

SAVANA 3500

SAVANA 3500 - LS SAVANA 3500 - LT SIERRA 1500 SIERRA 1500 - SL

213

CID

Liter

Description

Years

292 262 307 350 379 395 454

4.8 4.3 5.0 5.7 6.2 6.5 7.4

67-89 90-99 68-69 70-99 82-93 94-99 70-99

454 153 230 230 250 292 230 250 292 230 262 305 350 379 305 350 379 292 262 305 350 379 454 350 379 454 292 350 379 454 119 122 151 173 262 119 122 134 151 173 262 151 262 262 262 305 323 325 350 262 325 262 325 262 294 305 323 350 364 395 350 364 395 454 496 364 364 262 294 323 262

7.4 2.5 3.8 3.8 4.1 4.8 3.8 4.1 4.8 3.8 4.3 5.0 5.7 6.2 5.0 5.7 6.2 4.8 4.3 5.0 5.7 6.2 7.4 5.7 6.2 7.4 4.8 5.7 6.2 7.4 1.9 2.0 2.5 2.8 4.3 1.9 2.0 2.2 2.5 2.8 4.3 2.5 4.3 4.3 4.3 5.0 5.3 5.3 5.7 4.3 5.3 4.3 5.3 4.3 4.8 5.0 5.3 5.7 6.0 6.5 5.7 6.0 6.5 7.4 8.1 6.0 6.0 4.3 4.8 5.3 4.3

74 63-65 63 66 66 66 66 66 66 63 87 87 87 87 87 87-91 87-91 87-88 87 87 87-89 87-89 87-89 87-91 87-91 87-91 87-88 87-91 87-91 87-91 83-84 83-84 85-88 83-89 88-94 82-85 83-84 84-85 85-90 82-90 88-90 85-90 85-05 90-97 99-06 99-00 03-05 06 99-02 06 06 06 06 99-05 03-05 99-00 03-05 99-02 03-06 99-02 99-02 03-06 99-02 99-00 01-02 06 06 99-05 99-05 99-05 06

2474

2474 2474

Isuzu G200Z, OHC OHV Pontiac Eng. Isuzu G200Z, OHC OHV Isuzu C223 Pontiac Eng. Pontiac Eng.

GMC GMC MODEL INDEX (Cont’d.) Model

CID

SIERRA 1500 - SL SIERRA 1500 - SLE SIERRA 1500 - SLT SIERRA 1500 - WT SIERRA 1500 HD SIERRA 1500 HD - SLE SIERRA 1500 HD - SLT SIERRA 2500 SIERRA 2500 HD SIERRA 2500 HD - SL SIERRA 2500 HD - SLE SIERRA 2500 HD - SLT SIERRA 2500 HD - WT SIERRA 3500 SIERRA 3500 - SL SIERRA 3500 - SLE SIERRA 3500 - SLT SIERRA 3500 - WT SIERRA C3 SIERRA DENALI SONOMA

SONOMA - GT SPRINT

SPRINT - CUSTOM

SUBURBAN

Engine Set No. Sizes Available

325 325 325 325 364 325 364 262 325 325 364 364 364 323 364 364 496 364 496 364 496 364 496 364 496 364 496 364 496 364 496 364 496 364 496 364 364 134 151 173 262 173 262 250 305 307 350 400 402 454 250 305 350 400 402 454 153 230 250

Type and Location

Liter

5328 5328

5328

2474

Description

5.3 5.3 5.3 5.3 6.0 5.3 6.0 4.3 5.3 5.3 6.0 6.0 6.0 5.3 6.0 6.0 8.1 6.0 8.1 6.0 8.1 6.0 8.1 6.0 8.1 6.0 8.1 6.0 8.1 6.0 8.1 6.0 8.1 6.0 8.1 6.0 6.0 2.2 OHV 2.5 Pontiac Eng. 2.8 4.3 2.8 4.3 4.1 5.0 5.0 5.7 6.6 6.6 7.4 4.1 5.0 5.7 6.6 6.6 7.4 2.5 3.8 4.1

Standard Shaft Size

Housing Bore

Years 06 06 06 06 06 06 06 06 06 06 01-03 05-06 05-06 99-00 99-04 01-05 01-05 06 06 06 06 06 06 06 06 01-05 01-05 06 06 06 06 06 06 06 06 01 02-06 94-03 91-93 91-93 91-04 92 92 72-77 76-77 73 72-77 76 71-75 73-74 72-77 76-77 72-77 74-76 74-75 72-75 63 63-67 66-67

Model

SYCLONE TRUCK TYPHOON V1500 PICKUP

V1500 SUBURBAN V2500 PICKUP V2500 SUBURBAN V3000 FORWARD CONTROL V3500 PICKUP

YUKON

YUKON - DENALI YUKON - DENALI XL YUKON - SL YUKON - SLE

YUKON - SLT

YUKON DENALI YUKON DENALI XL YUKON XL 1500 YUKON XL 1500 - SL YUKON XL 1500 - SLE YUKON XL 1500 - SLT YUKON XL 2500 YUKON XL 2500 - SLE YUKON XL 2500 - SLT

Max. Bearing Thickness

Vertical Oil Clearance

ENGINE

VIN CYL

Bore x Stroke

119 (1.9) Isuzu G200Z, OHC

87mm x 82mm

CID

SUBURBAN

Liter

Description

Years

292 305 327 262 305 262 262 305 350 379 350 379 292 350 379 350 379

4.8 5.0 (305C) 5.4 4.3 5.0 (305C) 4.3 4.3 5.0 5.7 6.2 5.7 6.2 4.8 5.7 6.2 5.7 6.2

66-67 66-67 67 91 60 92-93 87 87 87 87 87-91 87-91 87 87 87 87-91 87-91

305 292 350 379 454 294 323 350 395 350 364 364 325 325 294 323 325 325 294 323 325 325 364 364 323 325 323 325 323 325 323 364 496 325 364 496 325 364 496

5.0 (305C) 4.8 5.7 6.2 7.4 4.8 5.3 5.7 6.5 5.7 6.0 6.0 5.3 5.3 4.8 5.3 5.3 5.3 4.8 5.3 5.3 5.3 6.0 6.0 5.3 5.3 5.3 5.3 5.3 5.3 5.3 6.0 8.1 5.3 6.0 8.1 5.3 6.0 8.1

61-62 87-88 87-91 87-91 87-91 00-04 00-04 92-00 94-99 99-00 01-04 01-04 06 06 05 05 06 05-06 05 05 06 05-06 05-06 05-06 00-04 06 05 06 05 06 00 00-04 01-04 06 05-06 05-06 06 05-06 05-06

5328

5328 5328 5328

5328 5328

Max. Overall Length

Material Code

Qty. Set

Bearing Shell No.

TORQUE SETTINGS Connecting Rod 43 ft.lbs/58 Nm Main Bearing 72 ft.lbs/97 Nm

Rod

4B2821 Std. .25 .50 .75 1.0 1.25 1.50

5M2817

Main 1,3,5

Std. .25 .50 .75 1.0 2,4

48.925/1.9262 48.940/1.9268

51.987/2.0467 52.000/2.0472

1.513/0.0596 .021/.0008 .076/.0030

22.00/0.866

F810

2821A IH

55.920/2.2016 55.935/2.2022

58.980/2.3220 59.000/2.3228

1.513/0.0596 .019/.0007 .080/.0031

32.13/1.265

F780

2817 IH

55.920/2.2016 55.935/2.2022

58.980/2.3220 59.000/2.3228

1.513/0.0596 .019/.0007 .080/.0031

21.08/0.830

F780

2818 IH

214

GMC Type and Location

Standard Shaft Size

Max. Bearing Thickness

Housing Bore

Vertical Oil Clearance

Max. Overall Length

Material Code

Qty. Set

Bearing Shell No.

Engine Set No. Sizes Available

(Contâ&#x20AC;&#x2122;d.) Thrust 3

62.610/2.4650 79.950/3.1476 2.36/0.093 62.860/2.4748 80.200/3.1575 Note: Thrust set includes two pieces, use on No. 3 position. Required with 5M2817 main set.

ENGINE

VIN CYL

Bore x Stroke

122 (2.0) OHV

3.50 x 3.15

F817

3286T IH

1T3286 Std.

TORQUE SETTINGS

Connecting Rod 34-43 ft.lbs/47-58 Nm Main Bearing 63-77 ft.lbs/85-105 Nm

Rod 50.775/1.9990 50.800/2.0000

53.967/2.1247 53.980/2.1252

1.577/0.0621 .013/.0005 .077/.0030

Main 1,2,3

63.360/2.4945 68.250/2.6870 2.423/0.0954 63.383/2.4954 68.273/2.6880 4 (Fl) 63.360/2.4945 68.250/2.6870 2.423/0.0954 63.383/2.4954 68.273/2.6880 5 63.360/2.4945 68.250/2.6870 2.423/0.0954 63.383/2.4954 68.273/2.6880 Overflange length remains constant for standard and undersizes. Cam 1 2,5 3,4

47.440/1.8677 47.490/1.8697 47.440/1.8677 47.490/1.8697 47.440/1.8677 47.490/1.8697

51.283/2.0190 51.308/2.0200 51.029/2.0090 51.079/2.0110 50.775/1.9990 50.825/2.0010

.021/.0008 .093/.0037 .021/.0008 .093/.0037 .021/.0008 .093/.0037

21.38/0.842

18.72/0.737

F780

2370 IH 7123 IH 7124 IH 7125 U/L

23.93/0.942

F780

20.95/0.825

F780

1.880/0.0741

16.00/0.630

F23

CH-19-1

1.750/0.0691

16.00/0.630

F23

CH-18-4

1.630/0.0640

16.13/0.635

F23

CH-18-2

4B745P Std. 01 10 20 30 40

5M1567P Std. .25 .50 .75 1.0

5C1195S Std.

ENGINE

VIN CYL

Bore x Stroke

134 (2.2) OHV 134 (2.2) OHV 134 (2.2) OHV

4 5 H

3.50 x 3.46 3.50 x 3.46 3.50 x 3.46

L4 L4 L4

TORQUE SETTINGS

Connecting Rod 38 ft.lbs/51 Nm Main Bearing 70 ft.lbs/95 Nm

Rod 50.775/1.9990 50.800/2.0000

53.967/2.1247 53.980/2.1252

1.577/0.0621 .013/.0005 .077/.0030

Std. 01 10 20 30 40

Main - for Trucks (1994-97). (This set contains shells that have the same tang location for positions #1,2,3 & 5) 1,2,3,5 63.360/2.4945 68.250/2.6870 2.423/0.0954 .021/.0008 18.72/0.737 F780 8 7123 63.383/2.4954 68.273/2.6880 .093/.0037 IH

Std. .25 .50 .75 1.0

63.360/2.4945 68.250/2.6870 2.423/0.0954 .021/.0008 63.383/2.4954 68.273/2.6880 .093/.0037 Overflange length remains constant for standard and undersizes.

F780

4B745P

2370 IH

4 (Fl)

21.38/0.842

23.93/0.942

F780

7124 IH

Main - for Trucks (1998 on). Different tang location for #3 position bearing. 1,2,5 63.358/2.4944 68.250/2.6870 2.423/0.0954 .021/.0008 18.72/0.737 63.383/2.4954 68.275/2.6880 .097/.0038

F780

7123 IH

63.358/2.4944 63.383/2.4954

68.250/2.6870 68.275/2.6880

2.423/0.0954 .021/.0008 .097/.0038

20.75/0.817

F780

7164 IH

63.358/2.4944 68.250/2.6870 2.423/0.0954 .021/.0008 63.383/2.4954 68.275/2.6880 .097/.0038 Overflange length remains constant for standard and undersizes.

23.93/0.942

F780

7124 IH

4 (Fl)

215

5M7124P

5M7164P Std. .25 .50 .75 1.0

GMC Engine Set No. Sizes Available

Type and Location

Standard Shaft Size

Housing Bore

Max. Bearing Thickness

Vertical Oil Clearance

Max. Overall Length

Material Code

Qty. Set

Bearing Shell No.

(Contâ&#x20AC;&#x2122;d.) 5M7183P

.25 .50 .75 1.0

7123 IH

63.358/2.4944 63.383/2.4954

68.250/2.6870 2.548/0.1003 .021/.0008 68.275/2.6880 (@ 0.25 mm u/s) .097/.0038

20.75/0.817

F780

7164 IH

4 (Fl)

63.358/2.4944 63.383/2.4954

68.250/2.6870 2.548/0.1003 .021/.0008 68.275/2.6880 (@ 0.25 mm u/s) .097/.0038

24.18/0.952

F780

7183 IH

5C1195S

Cam 1

47.440/1.8677 47.490/1.8697

51.283/2.0190 51.308/2.0200

1.880/0.0741

16.00/0.630

F23

CH-19-1

2,5

47.440/1.8677 47.490/1.8697

51.029/2.0090 51.079/2.0110

1.750/0.0691

16.00/0.630

F23

CH-18-4

3,4

47.440/1.8677 47.490/1.8697

50.775/1.9990 50.825/2.0010

1.630/0.0640

16.13/0.635

F23

CH-18-2

Std.

ENGINE

VIN CYL

Bore x Stroke

134 (2.2) Isuzu C223 Diesel

88mm x 92mm

TORQUE SETTINGS Connecting Rod 58-65 ft. lbs/79-88 Nm Main Bearing 116-130 ft.lbs/158-177 Nm

Rod

4B1320

52.918/2.0834 52.930/2.0839

55.980/2.2039 56.000/2.2047

1.513/0.0596 .020/.0008 .079/.0031

22.50/0.886

F780

1320 IH

59.920/2.3591 59.932/2.3595 59.920/2.3591 59.932/2.3595

63.975/2.5187 64.000/2.5197 63.975/2.5187 64.000/2.5197

2.017/0.0794 .013/.0005 .074/.0029 2.017/0.0794 .013/.0005 .074/.0029

27.65/1.089

F780

23.13/0.911

F780

1188 IH 1194 IH

59.920/2.3591 59.932/2.3595

63.975/2.5187 64.000/2.5197

2.017/0.0794 .013/.0005 .074/.0029

28.85/1.136

F780

1189 IH

72.260/2.8449 86.610/3.4098 2.49/0.098 72.520/2.8551 86.870/3.4201 Note: Thrust set includes two pieces, use on No. 3 position. Required with 5M1827 main sets.

F817

1192T IH

Std. .25 .50 .75 1.0

5M1188

Main 1,5

Std. .25 .50 .75 2,4 3

1T1192 Std.

3C8127

Thrust 3

Cam 1

Std. 2 3

47.940/1.8874 47.970/1.8886

51.999/2.0472 52.034/2.0486

2.027/0.0798

22.23/0.875

F23

8127

47.940/1.8874 47.970/1.8886 47.940/1.8874 47.970/1.8886

51.999/2.0472 52.034/2.0486 51.999/2.0472 52.034/2.0486

2.027/0.0798

22.23/0.875

F23

8128

2.027/0.0798

22.23/0.875

F23

8129

ENGINE

VIN CYL

Bore x Stroke

151 2474cc (2.5) Pontiac Eng. 151 2474cc (2.5) Pontiac Eng.

A E

4.00 x 3.00 4.00 x 3.00

4B610A Std. 10 20 30 40

4B610AO/S2 10 20 30 40

L4 L4

TORQUE SETTINGS Connecting Rod 30 ft.lbs/41 Nm (except crossflow) Connecting Rod 32 ft.lbs/44 Nm (crossflow) Main Bearing 65 ft.lbs/88 Nm (except crossflow) Main Bearing 70 ft.lbs/95 Nm (crossflow)

Rod - High Strength Aluminum Silicon material. 50.800/2.0000 53.967/2.1247 1.570/0.0618 .014/.0006 50.813/2.0005 53.980/2.1252 .066/.0026

18.84/0.742

F810

2226A IH

Rod - .002" oversize OD version of 4B610A. 50.800/2.0000 54.018/2.1267 1.722/0.0678 .015/.0006 50.813/2.0005 54.031/2.1272 (@ .010" u/size) .067/.0026

18.84/0.742

F810

9070A IH

216

GMC Type and Location

Standard Shaft Size

Max. Bearing Thickness

Housing Bore

Vertical Oil Clearance

Max. Overall Length

Material Code

Qty. Set

Bearing Shell No.

Engine Set No. Sizes Available

(Contâ&#x20AC;&#x2122;d.) Rod - To be superceded by 4B610A when stock exhausted. 50.800/2.0000 53.967/2.1247 1.570/0.0618 .014/.0006 50.813/2.0005 53.980/2.1252 .066/.0026

18.84/0.742

F780

58.377/2.2983 58.402/2.2993

63.261/2.4906 63.287/2.4916

2.426/0.0955 .007/.0003 .084/.0033

20.49/0.807

58.377/2.2983 63.261/2.4906 2.426/0.0955 .007/.0003 58.402/2.2993 63.287/2.4916 .084/.0033 Overflange length remains constant for standard and undersizes.

25.63/1.009

5 (Fl)

F780 F780

8 2

2226 IH 9070 IH 7132 U/L

58.377/2.2983 58.402/2.2993

63.261/2.4906 63.287/2.4916

.010" u/s shaft .020" u/s shaft .030" u/s shaft .040" u/s shaft Cam 1,2,3

47.452/1.8682 47.478/1.8692

ENGINE

50.775/1.9990 50.825/2.0010

2.426/0.0955 .007/.0003 .084/.0033

F780

4B610PO/S2 10 20 30 40

5M1733P Std. 01 10 20 30 40

5M7152P 10 20 30 40

7152 U/L

* DIMENSIONAL INFORMATION FOR 5M7152P Overall Width (Nominal) Increase in Width 1.019" +0.010" 1.019" +0.010" 1.019" +0.010" 1.019" +0.010"

1.640/0.0644

21.97/0.865

F23

CH-5-3

3C1030S Std.

VIN CYL

153 (2.5)

25.88/1.019

4B610P Std. 01 10 20 30 40

7133 U/L

Bore x Stroke 3.88 x 3.25

TORQUE SETTINGS

Connecting Rod 30-35 ft.lbs/41-48 Nm Main Bearing 45-55 ft.lbs/61-75 Nm

Rod 50.775/1.9990 50.800/2.0000

53.967/2.1247 53.980/2.1252

1.577/0.0621 .013/.0005 .077/.0030

21.38/0.842

58.377/2.2983 58.402/2.2993

63.261/2.4906 63.287/2.4916

2.426/0.0955 .007/.0003 .084/.0033

20.49/0.807

58.377/2.2983 63.261/2.4906 2.426/0.0955 .007/.0003 58.402/2.2993 63.287/2.4916 .084/.0033 Overflange length remains constant for standard and undersizes.

25.63/1.009

Main 1,2,3,4 5 (Fl)

F780

F780 F780

8 2

Std. 01 10 20 30 40

7132 U/L

Std. 01 10 20 30 40

58.377/2.2983 58.402/2.2993

63.261/2.4906 63.287/2.4916

.010" u/s shaft .020" u/s shaft .030" u/s shaft .040" u/s shaft Cam 3 1,2

2.426/0.0955 .007/.0003 .084/.0033

25.88/1.019

F780

5M1733P

7133 U/L

Main - Alt set to 5M1733P with +0.010" overflange length increase. * See below for dimensional information. 1,2,3,4 58.377/2.2983 63.261/2.4906 2.426/0.0955 .007/.0003 20.49/0.807 F780 8 7132 58.402/2.2993 63.287/2.4916 .084/.0033 U/L 5 (Fl)

4B745P

2370 IH

5M7152P 10 20 30 40

7152 U/L

* DIMENSIONAL INFORMATION FOR 5M7152P Overall Width (Nominal) Increase in Width 1.019" +0.010" 1.019" +0.010" 1.019" +0.010" 1.019" +0.010"

47.452/1.8682 47.478/1.8692

51.029/2.0090 51.079/2.0110

1.763/0.0694

21.97/0.865

F23

CH-5-2

47.452/1.8682 47.478/1.8692

50.775/1.9990 50.825/2.0010

1.636/0.0644

21.97/0.865

F23

CH-5-3

3C400S Std.

217

GMC Engine Set No. Sizes Available

Type and Location

Standard Shaft Size

Housing Bore

Max. Bearing Thickness

Vertical Oil Clearance

ENGINE

VIN CYL

Bore x Stroke

169 2770cc (2.8)

93mm x 102mm

Max. Overall Length

Material Code

Qty. Set

Bearing Shell No.

TORQUE SETTINGS Connecting Rod 18 ft.lbs + 110 deg Main Bearing 18 ft.lbs + 180 deg

Rod

4B2290A

56.691/2.2319 56.707/2.2326

Std. .25 .50 .75

4B2290AO/S2 .25 .50 .75 1.0

60.322/2.3749 60.338/2.3755

1.802/0.0709 .011/.0004 .059/.0023

Rod - .002" oversize back version of 4B2290A. 56.691/2.2319 60.372/2.3768 1.952/0.0769 .011/.0004 56.707/2.2326 60.388/2.3775 (@ 0.25mm u/size) .059/.0023

ENGINE

VIN CYL

Bore x Stroke

173 (2.8) 173 (2.8)

B R

3.50 x 2.99 3.50 x 2.99

6B1238A Std. 01 10 20 30 40

6B1238AO/S2 10 20 30 40

4M1493P 10 20 30 40

V6 V6

20.75/0.817

F810

2290A IH

20.75/0.817

F810

9102A IH

TORQUE SETTINGS Connecting Rod 34-40 ft.lbs/47-54 Nm Main Bearing 63-74 ft.lbs/85-101 Nm

Rod - High Strength Aluminum Silicon material. 50.759/1.9984 54.013/2.1265 1.575/0.0620 .027/.0011 50.785/1.9994 54.039/2.1275 .105/.0041

18.29/0.720

F810

7116A

Rod - .002" oversize OD version of 6B1238A. 50.759/1.9984 53.962/2.1245 1.727/0.0680 .014/.0006 50.785/1.9994 53.988/2.1255 (@ .010" u/s) .080/.0031

18.29/0.720

F810

9036A IH

63.340/2.4937 63.363/2.4946 63.340/2.4937 63.363/2.4946 63.340/2.4937 63.363/2.4946

.010" u/s shaft .020" u/s shaft .030" u/s shaft .040" u/s shaft

68.250/2.6870 68.275/2.6880 68.250/2.6870 68.275/2.6880 68.250/2.6870 68.275/2.6880

2.426/0.0955 .035/.0014 .109/.0043 2.426/0.0955 .035/.0014 .109/.0043 2.426/0.0955 .035/.0014 .109/.0043

18.85/0.742

F780

24.18/0.952

F780

31.70/1.248

F780

7118 U/L 7129 U/L 7120 U/L

* DIMENSIONAL INFORMATION FOR 4M1493P Overall Width (Nominal) Increase in Width 0.952" +0.010" 0.952" +0.010" 0.952" +0.010" 0.952" +0.010"

Main - For 1982-85 engines with 63.3 mm small journal design. 63.340/2.4937 68.250/2.6870 2.426/0.0955 .035/.0014 1 Std. 10 20 30 40 63.363/2.4946 68.275/2.6880 .109/.0043

4M1494P

24.64/0.970

F780

7117 U/L

2.426/0.0955 .035/.0014 .109/.0043 2.426/0.0955 .035/.0014 .109/.0043

18.85/0.742

F780

23.93/0.942

F780

7118 U/L 7119 U/L

63.340/2.4937 68.250/2.6870 2.426/0.0955 .035/.0014 63.363/2.4946 68.275/2.6880 .109/.0043 Overflange length remains constant for standard and undersizes.

31.70/1.248

F780

7120 U/L

.033/.0013 .109/.0043 .033/.0013 .109/.0043

24.80/0.976

F810

18.75/0.738

F810

7237A U/L 7238A U/L

2.426/0.0955 .033/.0013 .109/.0043

23.93/0.942

F810

2 3 (Fl)

63.340/2.4937 63.363/2.4946 63.340/2.4937 63.363/2.4946

68.250/2.6870 68.275/2.6880 68.250/2.6870 68.275/2.6880

Main - High Strength Aluminum Silicon material. 1,4 67.239/2.6472 72.149/2.8405 2.426/0.0955 Std. .25 .50 .75 1.0 67.264/2.6482 72.174/2.8415 2 67.239/2.6472 72.149/2.8405 2.426/0.0955 67.264/2.6482 72.174/2.8415

4M2037A

3 (Fl)

67.239/2.6472 67.264/2.6482

72.149/2.8405 72.174/2.8415

218

7239A U/L

GMC Type and Location

Standard Shaft Size

Max. Bearing Thickness

Housing Bore

Vertical Oil Clearance

Max. Overall Length

Material Code

Qty. Set

Bearing Shell No.

Engine Set No. Sizes Available

67.239/2.6472 67.264/2.6482

72.149/2.8405 72.174/2.8415

2.426/0.0955 .025/.0010 .102/.0040

18.75/0.738

F780

7238 U/L

67.239/2.6472 72.149/2.8405 67.264/2.6482 72.174/2.8415 to be discontinued when stock exhausted.

2.426/0.0955 .025/.0010 .102/.0040

24.18/0.952

F780

7122 U/L

3 (Fl)

4M7122P .25 .50 .75 1.0

47.440/1.8677 47.490/1.8697

51.029/2.0090 51.079/2.0110

1.760/0.0691

16.00/0.630

F23

CH-18-1A

47.440/1.8677 47.490/1.8697 47.440/1.8677 47.490/1.8697

50.775/1.9990 50.825/2.0010 51.029/2.0090 51.079/2.0110

1.630/0.0640

16.13/0.635

F23

CH-18-2

1.760/0.0691

16.00/0.630

F23

CH-18-4

Cam - optional set to 4C1102S with 0.725" wide #2 and #3 bushes. 47.440/1.8677 51.029/2.0090 1.760/0.0691 1 47.490/1.8697 51.079/2.0110

16.00/0.630

F23

CH-18-1A

2,3

47.440/1.8677 47.490/1.8697

50.775/1.9990 50.825/2.0010

1.630/0.0640

18.42/0.725

F23

CH-18-2A

47.440/1.8677 47.490/1.8697

51.029/2.0090 51.079/2.0110

1.760/0.0691

16.00/0.630

F23

CH-18-4

2,3 4

4C1102S Std.

Std.

ENGINE

VIN CYL

Bore x Stroke

200 (3.3) 229 (3.8) 229 (3.8)

M 9 K

3.50 x 3.48 3.74 x 3.48 3.74 x 3.48

V6 V6 V6

4C1102SW

TORQUE SETTINGS

Connecting Rod 45 ft.lbs/59 Nm Main Bearings 70 ft.lbs/95 Nm

Rod 53.315/2.0990 53.340/2.1000

56.507/2.2247 56.520/2.2252

1.575/0.0620 .017/.0007 .081/.0032

Main - High Strength Aluminum Silicon material. 1,2,3 62.189/2.4484 67.071/2.6406 2.426/0.0955 62.212/2.4493 67.094/2.6415 4 62.177/2.4479 67.071/2.6406 2.426/0.0955 62.200/2.4488 67.094/2.6415

18.11/0.713

F780

.007/.0003 .079/.0031 .020/.0008 .091/.0036

20.50/0.807 43.64/1.718

F810

2.426/0.0955 .007/.0003 .079/.0031

20.50/0.807

F780

62.177/2.4479 67.071/2.6406 2.426/0.0955 .020/.0008 62.200/2.4488 67.094/2.6415 .091/.0036 Overflange length remains constant for standard and undersizes.

43.64/1.718

Main 1,2,3

62.189/2.4484 62.212/2.4493

67.071/2.6406 67.094/2.6415

4 (Fl)

219

F810

F780

7110 IH 2377A U/L 2378A U/L 2377 U/L 2378 U/L

6B1227P Std. 10 20 30 40

4M1454A Std. 01 10 20 30 40

4M1454P Std. 01 10 20 30 40

GMC Engine Set No. Sizes Available

Type and Location

Standard Shaft Size

Housing Bore

Max. Bearing Thickness

Vertical Oil Clearance

Max. Overall Length

Material Code

Qty. Set

Bearing Shell No.

(Contâ&#x20AC;&#x2122;d.) 4M1628P

10 20 30 40

62.177/2.4479 67.071/2.6406 62.200/2.4488 67.094/2.6415 To be discontinued when stock exhausted.

.010" u/s shaft .020" u/s shaft .030" u/s shaft .040" u/s shaft

4M1684P 20 30 40

2.426/0.0955 .020/.0008 .091/.0036

44.15/1.738

F780

2379 U/L

* DIMENSIONAL INFORMATION FOR 4M1628P Overall Width (Nominal) Increase in Width 1.738" +0.020" 1.738" +0.020" 1.738" +0.020" 1.738" +0.020"

62.177/2.4479 67.071/2.6406 62.200/2.4488 67.094/2.6415 Stock not available from fee warehouses.

2.426/0.0955 .020/.0008 .091/.0036

44.65/1.758

F780

2355 U/L

* DIMENSIONAL INFORMATION FOR 4M1684P Overall Width (Nominal) Increase in Width .020" u/s shaft 1.758" +0.040" .030" u/s shaft 1.758" +0.040" .040" u/s shaft 1.758" +0.040"

4C1089S

Cam 1

Std. 2,4 3

47.452/1.8682 47.478/1.8692

51.283/2.0190 51.333/2.0210

1.890/0.0744

18.92/0.745

F23

CH-4-1

47.452/1.8682 47.478/1.8692 47.452/1.8682 47.478/1.8692

51.029/2.0090 51.079/2.0110 50.775/1.9990 50.825/2.0010

1.763/0.0694

18.92/0.745

F23

CH-4-2

1.640/0.0646

18.92/0.745

F23

CH-4-3

ENGINE

VIN CYL

Bore x Stroke

211 3460cc (3.5)

93mm x 102mm

TORQUE SETTINGS Connecting Rod 18 ft.lbs + 110 deg Main Bearing 18 ft.lbs + 180 deg

Rod

5B2290A

56.694/2.2320 56.707/2.2326

Std. .25 .50 .75

5B2290AO/S2 .25 .50 .75 1.0

60.322/2.3749 60.338/2.3755

1.802/0.0709 .011/.0004 .059/.0023

Rod - .002" oversize back version of 5B2290A. 56.691/2.2319 60.372/2.3768 1.952/0.0769 .011/.0004 56.707/2.2326 60.388/2.3775 (@ 0.25mm u/size) .059/.0023

ENGINE

VIN CYL

230 (3.8) 230 (3.8) 250 (4.1) 250 (4.1) 250 (4.1) 250 (4.1) 250 (4.1) 250 (4.1) 250 (4.1)

S C D L N P Q

L6 L6 L6 L6 L6 L6 L6 L6 L6

Bore x Stroke 3.88 x 3.25 3.88 x 3.25 3.88 x 3.53 3.88 x 3.53 3.88 x 3.53 3.88 x 3.53 3.88 x 3.53 3.88 x 3.53 3.88 x 3.53

20.75/0.817

F810

2290A IH

20.75/0.817

F810

9102A IH

TORQUE SETTINGS Connecting Rod 35-45 ft.lbs/48-61 Nm Main Bearing 60-70 ft.lbs/81-95 Nm

Rod

6B745P Std. 01 10 20 30 40

50.775/1.9990 50.800/2.0000

53.967/2.1247 53.980/2.1252

1.577/0.0621 .013/.0005 .077/.0030

220

21.38/0.842

F780

2370 IH

GMC Type and Location

Standard Shaft Size

Max. Bearing Thickness

Housing Bore

Vertical Oil Clearance

Max. Overall Length

Material Code

Qty. Set

Bearing Shell No.

Engine Set No. Sizes Available

(Contâ&#x20AC;&#x2122;d.) Main 1-6

58.377/2.2983 58.402/2.2993

63.261/2.4906 63.287/2.4916

2.426/0.0955 .007/.0003 .084/.0033

20.49/0.807

58.377/2.2983 63.261/2.4906 2.426/0.0955 .007/.0003 58.402/2.2993 63.287/2.4916 .084/.0033 Overflange length remains constant for standard and undersizes.

25.63/1.009

F780

7133 U/L

7 (Fl)

F780

7132 U/L

Cam - engines from 1963-1970. 47.452/1.8682 51.029/2.0090 1,4 47.478/1.8692 51.079/2.0110

1.763/0.0694

21.97/0.865

F23

CH-5-2

2,3

1.636/0.0644

21.97/0.865

F23

CH-5-3

1.636/0.0644

21.97/0.865

F23

CH-5-3

47.452/1.8682 47.478/1.8692

50.775/1.9990 50.825/2.0010

Cam - engines from 1971 on. 47.452/1.8682 50.775/1.9990 1,2,3,4 47.478/1.8692 50.825/2.0010

7M617P Std. 10 20 30 40

4C399S Std.

4C718S Std.

ENGINE

VIN CYL

Bore x Stroke

231 (3.8) Buick Eng. 231 (3.8) Buick Eng.

2 A

3.80 x 3.40 3.80 x 3.40

Rod - .660" wide bearing. 57.117/2.2487 60.295/2.3738 57.137/2.2495 60.312/2.3745

V6 V6

TORQUE SETTINGS

Connecting Rod 40 ft.lbs/54 Nm Main Bearing 110 ft.lbs/150 Nm

1.572/0.0619 .014/.0006 .077/.0030

Rod - .002" oversize OD version of 6B1228P. 57.117/2.2487 60.346/2.3758 1.724/0.0679 .005/.0002 57.137/2.2495 60.363/2.3765 (@ .010" u/s) .078/.0031

16.76/0.660

F780

2360 IH 9071 IH

Main - half groove, standard oil clearance - alternate to 4M960P with +0.020" overflange length increase. * See below for dimensional information. 1,3 63.475/2.4990 68.250/2.6870 2.365/0.0931 .020/.0008 22.07/0.869 F780 4 9015 63.500/2.5000 68.275/2.6880 .096/.0038 U/L 4 63.475/2.4990 68.250/2.6870 2.365/0.0931 .020/.0008 22.07/0.869 F780 1 9016 63.500/2.5000 68.275/2.6880 .096/.0038 L 4 63.475/2.4990 68.250/2.6870 2.365/0.0931 .020/.0008 22.07/0.869 F780 1 9019 63.500/2.5000 68.275/2.6880 .096/.0038 U 2 (Fl) 63.475/2.4990 68.250/2.6870 2.365/0.0931 .020/.0008 27.38/1.078 F780 2 9018 63.500/2.5000 68.275/2.6880 .096/.0038 U/L to be discontinued when stock exhausted.

6B1228P Std. 01 10 20 30 40

6B1228PO/S2 10 20 30 40

4M1688P 10 20 30

* DIMENSIONAL INFORMATION FOR 4M1688P Overall Width (Nominal) Increase in Width .010" u/s shaft 1.078" +0.020" .020" u/s shaft 1.078" +0.020" .030" u/s shaft 1.078" +0.020" Main - half groove, standard oil clearance - alternate to 4M960P with +0.040" overflange length increase. * See below for dimensional information. 63.475/2.4990 68.250/2.6870 2.365/0.0931 .020/.0008 22.07/0.869 F780 4 9015 1,3 63.500/2.5000 68.275/2.6880 .096/.0038 U/L 4

63.475/2.4990 63.500/2.5000

68.250/2.6870 68.275/2.6880

2.365/0.0931 .020/.0008 .096/.0038

22.07/0.869

F780

9019 U

63.475/2.4990 63.500/2.5000 63.475/2.4990 63.500/2.5000

68.250/2.6870 68.275/2.6880 68.250/2.6870 68.275/2.6880

2.365/0.0931 .020/.0008 .096/.0038 2.365/0.0931 .020/.0008 .096/.0038

22.07/0.869

F780

27.89/1.098

F780

9016 L 9024 U/L

2 (Fl)

* DIMENSIONAL INFORMATION FOR 4M1690P Overall Width (Nominal) Increase in Width .020" u/s shaft 1.098" +0.040" .030" u/s shaft 1.098" +0.040"

221

4M1690P 20 30

GMC Engine Set No. Sizes Available

Type and Location

Standard Shaft Size

Housing Bore

Max. Bearing Thickness

Vertical Oil Clearance

Max. Overall Length

Material Code

Qty. Set

Bearing Shell No.

12 (Contâ&#x20AC;&#x2122;d.) 4M1747P 10 20 40

Main - alternate set to 4M960P with +0.010" overflange length increase. *See below for dimensional information. 63.475/2.4990 68.250/2.6870 2.365/0.0931 .020/.0008 22.07/0.869 F780 4 9015 1,3 63.500/2.5000 68.275/2.6880 .096/.0038 U/L 4

63.475/2.4990 63.500/2.5000

68.250/2.6870 68.275/2.6880

2.365/0.0931 .020/.0008 .096/.0038

22.07/0.869

F780

9016 L

63.475/2.4990 68.250/2.6870 63.500/2.5000 68.275/2.6880 2 (Fl) 63.475/2.4990 68.250/2.6870 63.500/2.5000 68.275/2.6880 to be discontinued when stock exhausted.

2.365/0.0931 .020/.0008 .096/.0038 2.365/0.0931 .020/.0008 .096/.0038

22.07/0.869

F780

27.13/1.068

F780

9019 U 9020 U/L

* DIMENSIONAL INFORMATION FOR 4M1747P Overall Width (Nominal) Increase in Width .010" u/s shaft 1.068" +0.010" .020" u/s shaft 1.068" +0.010" .040" u/s shaft 1.068" +0.010" Main - half groove, standard oil clearance. Set includes modified rear main bearing. 1,3 63.475/2.4990 68.250/2.6870 2.365/0.0931 .020/.0008 22.07/0.869 F780 Std. 01 10 20 30 40 63.500/2.5000 68.275/2.6880 .096/.0038 4 63.475/2.4990 68.250/2.6870 2.365/0.0931 .020/.0008 22.07/0.869 F780 63.500/2.5000 68.275/2.6880 .096/.0038 4 63.475/2.4990 68.250/2.6870 2.365/0.0931 .020/.0008 22.07/0.869 F780 63.500/2.5000 68.275/2.6880 .096/.0038

4M960P

63.475/2.4990 68.250/2.6870 2.365/0.0931 .020/.0008 63.500/2.5000 68.275/2.6880 .096/.0038 Overflange length remains constant for standard and undersizes.

4C1031BS Std.

4C1031S

F780

9017 U/L

Cam - grooved O/D on #1 bush - alt. set to 4C1031S. 45.339/1.7850 48.654/1.9155 1.630/0.0642 1 45.364/1.7860 48.705/1.9175

19.18/0.755

F23

B-11-1B

2,3,4 Cam 1

45.339/1.7850 45.364/1.7860

48.654/1.9155 48.705/1.9175

1.630/0.0642

15.88/0.625

F23

B-9-2

45.339/1.7850 45.364/1.7860 45.339/1.7850 45.364/1.7860

48.654/1.9155 48.705/1.9175 48.654/1.9155 48.705/1.9175

1.630/0.0642

19.18/0.755

F23

B-11-1

1.630/0.0642

15.88/0.625

F23

B-9-2

ENGINE

VIN CYL

Bore x Stroke

256 (4.2)

93mm x 102mm

Std. .25 .50 .75 1.0

6B2290AO/S2 .25 .50 .75 1.0

7M2224A Std. 10 20

AB3664 Semi

26.87/1.058

2,3,4

6B2290A

9015 U/L 9016 L 9019 U

2 (Fl)

Std.

TORQUE SETTINGS Connecting Rod 18 ft.lbs + 110 deg Main Bearing 18 ft.lbs + 180 deg

Rod - High strength Aluminum Silicon material. 56.691/2.2319 60.322/2.3749 1.798/0.0708 .011/.0004 56.707/2.2326 60.338/2.3755 .059/.0023

20.75/0.817

F810

2290A IH

Rod - .002" oversize OD version of 6B2290A. 56.691/2.2319 60.372/2.3768 1.952/0.0769 .011/.0004 56.707/2.2326 60.388/2.3775 (@ .25mm u/s) .059/.0023

20.75/0.817

F810

9102A IH

Main 1,2,3,4, 6,7 5 (Fl)

69.967/2.7546 69.982/2.7552

78.069/3.0736 78.087/3.0743

4.044/0.1592 .007/.0003 .050/.0020

20.68/0.814

F820

MB3781P U/L

69.967/2.7546 69.982/2.7552

78.069/3.0736 78.087/3.0743

4.044/0.1592 .007/.0003 .050/.0020

25.35/0.998

F820

MB3782P U/L

Small End 22.997/0.9054 23.000/0.9055

25.857/1.0180

1.372/0.0540

23.75/0.935

F100

223-3664

222

GMC Type and Location

Standard Shaft Size

Max. Bearing Thickness

Housing Bore

Vertical Oil Clearance

ENGINE

VIN CYL

Bore x Stroke

262 (4.3) 262 (4.3) 262 (4.3) 262 (4.3) 262 (4.3) 262 (4.3) Turbo

B N W X Z Z

4.000 x 3.484 4.000 x 3.484 4.000 x 3.484 4.000 x 3.484 4.000 x 3.484 4.000 x 3.484

V6 V6 V6 V6 V6 V6

Max. Overall Length

Material Code

Qty. Set

Bearing Shell No.

Engine Set No. Sizes Available

TORQUE SETTINGS

Connecting Rod 45 ft.lbs/61 Nm Main Bearing 70 ft.lbs/95 Nm

Rod - High Strength Aluminum Silicon material. 57.130/2.2492 60.317/2.3747 1.575/0.0620 .022/.0009 57.145/2.2498 60.342/2.3757 .089/.0035

18.92/0.745

Rod - .002" oversize OD version of 6B1358A. 57.130/2.2492 60.368/2.3767 1.613/0.0635 .022/.0009 57.145/2.2498 60.393/2.3777 (@ .010" u/s) .089/.0035

18.92/0.745

F810

7111A

6B1358A Std. 01 10 20 30 40

F810

9042A IH

6B1358AO/S2 10 20 30 40

Rod 57.130/2.2492 57.145/2.2498

60.317/2.3747 60.342/2.3757

1.575/0.0620 .022/.0009 .089/.0035

Main - High Strength Aluminum Silicon material. 1,2,3 62.189/2.4484 67.071/2.6406 2.426/0.0955 62.212/2.4493 67.094/2.6415 4 62.177/2.4479 67.071/2.6406 2.426/0.0955 62.200/2.4488 67.094/2.6415 Main 1,2,3

18.92/0.745

F780

.007/.0003 .079/.0031 .020/.0008 .091/.0036

20.50/0.807 43.64/1.718

F810

.007/.0003 .079/.0031 .020/.0008 .091/.0036

20.50/0.807

F780

43.64/1.718

F810

F780

7111 IH 2377A U/L 2378A U/L 2377 U/L 2378 U/L

Main - optional set to 4M1454P with +0.020" overflange length increase. *See dimensional information below. 62.189/2.4484 67.071/2.6406 2.426/0.0955 .007/.0003 20.50/0.807 F780 6 2377 1,2,3 62.212/2.4493 67.094/2.6415 .079/.0031 U/L 4 (Fl)

62.177/2.4479 67.071/2.6406 62.200/2.4488 67.094/2.6415 to be discontinued when stock exhausted.

.010" u/s shaft .020" u/s shaft .030" u/s shaft .040" u/s shaft

2.426/0.0955 .020/.0008 .091/.0036

44.15/1.738

F780

62.177/2.4479 67.071/2.6406 62.200/2.4488 67.094/2.6415 Stock not available from fee warehouses.

4M1454A Std. 01 10 20 30 40

4M1454P Std. 01 10 20 30 40

4M1628P 10 20 30 40

2379 U/L

* DIMENSIONAL INFORMATION FOR 4M1628P Overall Width (Nominal) Increase in Width 1.738" +0.020" 1.738" +0.020" 1.738" +0.020" 1.738" +0.020"

Main - optional set to 4M1454P with +0.040" overflange length increase. *See dimensional information below. 62.189/2.4484 67.071/2.6406 2.426/0.0955 .007/.0003 20.50/0.807 F780 6 2377 1,2,3 62.212/2.4493 67.094/2.6415 .079/.0031 U/L 4 (Fl)

6B1358P Std. 01 10 20 30 40 50 60

2.426/0.0955 .020/.0008 .091/.0036

44.65/1.758

F780

4M1684P 20 30 40

2355 U/L

* DIMENSIONAL INFORMATION FOR 4M1684P Overall Width (Nominal) Increase in Width .020" u/s shaft 1.758" +0.040" .030" u/s shaft 1.758" +0.040" .040" u/s shaft 1.758" +0.040" Cam - for engines from 1985 on without ID number "T" on front of block. 1 47.452/1.8682 51.283/2.0190 1.890/0.0744 18.92/0.745 47.478/1.8692 51.333/2.0210

F23

CH-4-1

2,4

47.452/1.8682 47.478/1.8692

51.029/2.0090 51.079/2.0110

1.763/0.0694

18.92/0.745

F23

CH-4-2

47.452/1.8682 47.478/1.8692

50.775/1.9990 50.825/2.0010

1.640/0.0646

18.92/0.745

F23

CH-4-3

223

4C1089S Std.

GMC Engine Set No. Sizes Available

Type and Location

Standard Shaft Size

Housing Bore

Max. Bearing Thickness

Vertical Oil Clearance

Max. Overall Length

Material Code

Qty. Set

Bearing Shell No.

Cam - for engines from 1992 on with ID number "T" on front of block. 47.452/1.8682 51.283/2.0190 1.890/0.0744 19.05/0.750 1,4 47.478/1.8692 51.333/2.0210

F23

CH-4-1

47.452/1.8682 47.478/1.8692

50.775/1.9990 50.825/2.0010

1.640/0.0646

19.05/0.750

F23

CH-4-3

47.452/1.8682 47.478/1.8692

51.029/2.0090 51.079/2.0110

1.763/0.0694

19.05/0.750

F23

CH-4-2

Balance Shaft - VIN X, W, Z engines - contains bearing and spacer. 38.064/1.4986 47.587/1.8735 4.724/0.1860 .013/.0005 21.21/0.835 Rear 38.100/1.5000 47.612/1.8745 .050/.0020

F23

CHG-15A

14 (Contâ&#x20AC;&#x2122;d.) 4C1351S Std.

1BS1400S Std.

ENGINE

VIN CYL

Bore x Stroke

267 (4.4) 305 (5.0) 305 (5.0) 305 (5.0) 305 (5.0) 305 (5.0) 305 (5.0) 307 (5.0) 307 (5.0) 307 (5.0) 307 (5.0) 307 (5.0) 307 (5.0) 307 (5.0) 327 (5.4) 350 (5.7) 350 (5.7) 350 (5.7) 350 (5.7) 350 (5.7) 350 (5.7) 350 (5.7) 350 (5.7) 350 (5.7) 350 (5.7) 350 (5.7) 350 (5.7) 350 (5.7)

J F G H M Q U A B E F H P X E B E H J K K L M P R V W Y

3.50 x 3.48 3.74 x 3.48 3.74 x 3.48 3.74 x 3.48 3.74 x 3.48 3.74 x 3.48 3.74 x 3.48 3.88 x 3.25 3.88 x 3.25 3.88 x 3.25 3.88 x 3.25 3.88 x 3.25 3.88 x 3.25 3.88 x 3.25 4.00 x 3.25 4.00 x 3.48 4.00 x 3.48 4.00 x 3.48 4.00 x 3.48 4.00 x 3.48 4.00 x 3.48 4.00 x 3.48 4.00 x 3.48 4.00 x 3.48 4.00 x 3.48 4.00 x 3.48 4.00 x 3.48 4.00 x 3.48

8B663A Std. 01 10 20 30 40

8B663AO/S2 10 20 30 40

8B663P Std. 01 10 20 30 40 50 60

8B663PO/S2 10 20 30 40

V8 V8 V8 V8 V8 V8 V8 V8 V8 V8 V8 V8 V8 V8 V8 V8 V8 V8 V8 V8 V8 V8 V8 V8 V8 V8 V8 V8

TORQUE SETTINGS Connecting Rod 35 ft.lbs/48 Nm (11/32" bolts only) Connecting Rod 45 ft.lbs/61 Nm (3/8" bolts only) Main Bearing 75 ft.lbs/102 Nm

Rod - High strength Aluminum Silicon material. 53.315/2.0990 56.507/2.2247 1.575/0.0620 .017/.0007 53.340/2.1000 56.520/2.2252 .081/.0032

21.25/0.837

F810

2376A

Rod - .002" oversize OD version of 8B663A. 53.315/2.0990 56.558/2.2267 1.727/0.0680 .018/.0007 53.340/2.1000 56.571/2.2272 (@ .010" u/s) .082/.0032

21.25/0.837

F810

9026A IH

Rod - standard oil clearance. 53.315/2.0990 56.507/2.2247 53.340/2.1000 56.520/2.2252

21.25/0.837

F780

2376 IH

21.25/0.837

F780

9026 IH

1.575/0.0620 .017/.0007 .081/.0032

Rod - .002" oversize OD version of 8B663P. 53.315/2.0990 56.558/2.2267 1.727/0.0680 .018/.0007 53.340/2.1000 56.571/2.2272 (@ .010" u/s) .082/.0032

224

GMC Type and Location

Standard Shaft Size

Housing Bore

Max. Bearing Thickness

Vertical Oil Clearance

Max. Overall Length

Material Code

Qty. Set

Bearing Shell No.

Engine Set No. Sizes Available

.010" u/s shaft .020" u/s shaft .030" u/s shaft .040" u/s shaft .050" u/s shaft .060" u/s shaft

5M1626P 10 20 30 40 50 60

2379 U/L

* DIMENSIONAL INFORMATION FOR 5M1626P Overall Width (Nominal) Increase in Width 1.738" +0.020" 1.738" +0.020" 1.738" +0.020" 1.738" +0.020" 1.738" +0.020" 1.738" +0.020"

5M1683P 20 30 40

2355 U/L

* DIMENSIONAL INFORMATION FOR 5M1683P Overall Width (Nominal) Increase in Width .020" u/s shaft 1.758" +0.040" .030" u/s shaft 1.758" +0.040" .040" u/s shaft 1.758" +0.040" Main - optional set to 5M909P with +0.010" overflange length increase. *See dimensional information below. 1,2,3,4 62.189/2.4484 67.071/2.6406 2.426/0.0955 .008/.0003 20.50/0.807 F780 8 62.212/2.4493 67.094/2.6415 .079/.0031 5 (Fl) 62.174/2.4478 67.071/2.6406 2.426/0.0955 .020/.0008 43.89/1.728 F780 2 62.200/2.4488 67.094/2.6415 .091/.0036 Note: For 302 engine only - standard shaft diameter on all positions is 2.4478"/2.4488" and oil clearance is .0008"/.0036".

.010" u/s shaft .020" u/s shaft .030" u/s shaft .040" u/s shaft .050" u/s shaft .060" u/s shaft

2377 U/L 2365 U/L

* DIMENSIONAL INFORMATION FOR 5M1744P Overall Width (Nominal) Increase in Width 1.728" +0.010" 1.728" +0.010" 1.728" +0.010" 1.728" +0.010" 1.728" +0.010" 1.728" +0.010"

Main - High strength Aluminum Silicon material. 1,2,3,4 62.189/2.4484 67.071/2.6406 2.426/0.0955 62.212/2.4493 67.094/2.6415 5 (Fl) 62.174/2.4478 67.071/2.6406 2.426/0.0955 62.200/2.4488 67.094/2.6415

.008/.0003 .079/.0031 .020/.0008 .091/.0036

20.50/0.807 43.64/1.718

F810 F810

8 2

2377A U/L 2378A U/L

5M1744P 10 20 30 40 50 60

1.641/0.0646 .025/.0010 .127/.0050

Cam - Single piece from 5C3349C set (#1 position cam). 47.452/1.8682 51.283/2.0190 1.895/0.0746 .025/.0010 47.478/1.8692 51.333/2.0210 .127/.0050

225

19.05/0.750

F830

3346

5M909A Std. 01 10 20 30 40

5M909P Std. 01 10 20 30 40 50 60

1C3346C Std.

19.05/0.750

F830

3349

1C3349C Std.

GMC Engine Set No. Sizes Available

Type and Location

Standard Shaft Size

Housing Bore

Max. Bearing Thickness

Vertical Oil Clearance

Max. Overall Length

Material Code

Qty. Set

Bearing Shell No.

15 (Contâ&#x20AC;&#x2122;d.) 5C004AS Std.

5C004BS Std.

5C290S Std.

5C3346C Std.

5C3349C Std.

19536

19537

Cam - standard housing bores. 47.452/1.8682 51.283/2.0190 1 47.478/1.8692 51.333/2.0210

1.890/0.0744

18.92/0.745

F23

CH-4-1

2,5

47.452/1.8682 47.478/1.8692

51.029/2.0090 51.079/2.0110

1.760/0.0694

18.92/0.745

F23

CH-4-2

3,4

47.452/1.8682 47.478/1.8692

50.775/1.9990 50.825/2.0010

1.640/0.0646

18.92/0.745

F23

CH-4-3

Cam - All housing bores constant at 1.9990"/2.0010" (High Performance). 47.452/1.8682 50.775/1.9990 1.641/0.0646 .025/.0010 19.05/0.750 1-5 47.478/1.8692 50.825/2.0010 .127/.0050

F830

3346

19.05/0.750

F830

3349

19.05/0.750

F830

3347

19.05/0.750

F830

3346

ENGINE

VIN CYL

283 327 (5.4)

V8 V8

.025/.0010 .127/.0050 .025/.0010 .127/.0050 .025/.0010 .127/.0050

Bore x Stroke 3.88 x 3.00 4.00 x 3.25

TORQUE SETTINGS Connecting Rod 35 ft.lbs/48 Nm (11/32" bolts only) Connecting Rod 45 ft.lbs/61 Nm (3/8" bolts only) Main Bearing 60-70 ft.lbs/81-95 Nm (265,283,327 engines)

Main Bearing 80 ft.lbs/108 Nm (302 engines) Rod

8B745P

50.775/1.9990 50.800/2.0000

Std. 01 10 20 30 40

5M2372P 10 20 30 40

53.967/2.1247 53.980/2.1252

58.364/2.2978 63.261/2.4906 58.390/2.2988 63.287/2.4916 Stock not available from fee warehouses.

.010" u/s shaft .020" u/s shaft .030" u/s shaft .040" u/s shaft

Std. 01 10 20 30 40

1C3346C Std.

1C3349C Std.

21.38/0.842

F780

2370 IH

5M429P

1.577/0.0621 .013/.0005 .076/.0030

2.428/0.0956 .015/.0006 .093/.0037

43.89/1.728

F780

3345 U/L

7132 U/L 7104 U/L

* DIMENSIONAL INFORMATION FOR 5M2372P Overall Width (Nominal) Increase in Width 1.728" +0.010" 1.728" +0.010" 1.728" +0.010" 1.728" +0.010"

Main 1,2,3,4

.007/.0003 .084/.0033 .015/.0006 .093/.0037

20.49/0.807

F780

43.64/1.718

F780

1.641/0.0646 .025/.0010 .127/.0050

19.05/0.750

F830

3346

19.05/0.750

F830

3349

Cam - Single piece from 5C3349C set (#1 cam). 47.452/1.8682 51.283/2.0190 1.895/0.0746 .025/.0010 47.478/1.8692 51.333/2.0210 .127/.0050

226

GMC Type and Location

Standard Shaft Size

Max. Bearing Thickness

Housing Bore

Vertical Oil Clearance

Max. Overall Length

Material Code

Qty. Set

Bearing Shell No.

Engine Set No. Sizes Available

19536

19537

Cam 1

5C004AS Std.

5C004BS Std.

47.452/1.8682 47.478/1.8692

51.283/2.0190 51.333/2.0210

1.890/0.0744

18.92/0.745

F23

CH-4-1

2,5

47.452/1.8682 47.478/1.8692

51.029/2.0090 51.079/2.0110

1.760/0.0694

18.92/0.745

F23

CH-4-2

3,4

47.452/1.8682 47.478/1.8692

50.775/1.9990 50.825/2.0010

1.640/0.0646

18.92/0.745

F23

CH-4-3

Cam - All housing bores constant at 1.9990"/2.0010" (High Performance) 47.452/1.8682 50.775/1.9990 1.641/0.0646 .025/.0010 19.05/0.750 1-5 47.478/1.8692 50.825/2.0010 .127/.0050

F830

3346

5C290S Std.

ENGINE

VIN CYL

292 (4.8) 292 (4.8) 292 (4.8) 292 (4.8)

S S T

L6 L6 L6 L6

.025/.0010 .127/.0050 .025/.0010 .127/.0050 .025/.0010 .127/.0050

Bore x Stroke 3.88 x 4.13 3.88 x 4.13 3.88 x 4.13 3.88 x 4.13

5C3346C Std.

19.05/0.750

F830

3349

19.05/0.750

F830

3347

19.05/0.750

F830

3346

5C3349C Std.

TORQUE SETTINGS

Connecting Rod 30-35 ft.lbs/41-48 Nm Main Bearing 60-70 ft.lbs/81-95 Nm

Rod - High strength Aluminum Silicon material. 53.315/2.0990 56.507/2.2247 1.575/0.0620 .017/.0007 53.340/2.1000 56.520/2.2252 .081/.0032

21.25/0.837

F810

6B663A

2376A IH

Std. 10 20 30 40

2376 IH

Std. 10 20 30 40

7132 U/L

Std. 10 20 30 40

Rod 53.315/2.0990 53.340/2.1000

56.507/2.2247 56.520/2.2252

1.575/0.0620 .017/.0007 .081/.0032

21.25/0.837

58.377/2.2983 58.402/2.2993

63.261/2.4906 63.287/2.4916

2.426/0.0955 .007/.0003 .084/.0033

20.49/0.807

58.377/2.2983 63.261/2.4906 2.426/0.0955 .007/.0003 58.402/2.2993 63.287/2.4916 .084/.0033 Overflange length remains constant for standard and undersizes.

25.63/1.009

F780

7133 U/L

1.763/0.0694

21.97/0.865

F23

CH-5-2

1.636/0.0644

21.97/0.865

F23

CH-5-3

1.636/0.0644

21.97/0.865

F23

CH-5-3

Main 1-6 7 (Fl)

Cam - engines from 1966-1970. 47.452/1.8682 51.029/2.0090 1,4 47.478/1.8692 51.079/2.0110 2,3 47.452/1.8682 50.775/1.9990 47.478/1.8692 50.825/2.0010 Cam - engines from 1971-1989. 47.452/1.8682 50.775/1.9990 1,2,3,4 47.478/1.8692 50.825/2.0010

F780

6B663P

7M617P

4C399S Std.

4C718S Std.

227

GMC Engine Set No. Sizes Available

Type and Location

Standard Shaft Size

Housing Bore

Max. Bearing Thickness

Vertical Oil Clearance

ENGINE

VIN CYL

Bore x Stroke

294 (4.8) 323 (5.3) 323 (5.3) 323 (5.3) 323 (5.3) 323 (5.3) 325 (5.3) 325 (5.3) 325 (5.3) 325 5328cc (5.3) (L59) 364 (6.0) 364 (6.0)

V B M P T Z B M T Z N U

96mm x 83mm 96mm x 92mm 96mm x 92mm 96mm x 92mm 96mm x 92mm 96mm x 92mm 96mm x 92mm 96mm x 92mm 96mm x 92mm 96mm x 92mm 101.6mm x 92mm 101.6mm x 92mm

V8 V8 V8 V8 V8 V8 V8 V8 V8 V8 V8 V8

Max. Overall Length

Material Code

Qty. Set

Bearing Shell No.

TORQUE SETTINGS Connecting Rod 15 ft.lbs + 60 deg. Main Bearing 15 ft.lbs + 80 deg Inner Main Bearing 18 ft.lbs Side Bolts

Rod - High Strength Aluminum Silicon material. 53.315/2.0990 56.507/2.2247 1.575/0.0620 .017/.0007 53.340/2.1000 56.520/2.2252 .081/.0032

21.25/0.837

F810

2376A

Rod - .002" oversize OD version of 8B663A. 53.315/2.0990 56.558/2.2267 1.727/0.0680 .018/.0007 53.340/2.1000 56.571/2.2272 (@ .010" u/s) .082/.0032

21.25/0.837

F810

9026A IH

21.25/0.837

F780

2376 IH

Rod - .002" oversize OD version of 8B663P. 53.315/2.0990 56.558/2.2267 1.727/0.0680 .018/.0007 53.340/2.1000 56.571/2.2272 (@ .010" u/s) .082/.0032

21.25/0.837

F780

9026 IH

Main - High Strength Aluminum Silicon material. 64.993/2.5588 69.873/2.7509 2.430/0.0957 .006/.0002 1,2,4,5 Std. 10 20 30 40 65.007/2.5593 69.887/2.7515 .046/.0018

20.45/0.805

F810

7298A U/L

26.10/1.028

F810

7299A U/L

Cam - 1999-2003 with 1st design # 1 & 5 housing size of 2.3260"-2.3280". 54.991/2.1650 59.080/2.3260 2.007/0.0790 16.00/0.630 1,5 55.042/2.1670 59.131/2.3280

F23

CH-10-1

2,4

8B663A Std. 01 10 20 30 40

8B663AO/S2 10 20 30 40

Rod

8B663P

53.315/2.0990 53.340/2.1000

Std. 01 10 20 30 40 50 60

8B663PO/S2 10 20 30 40

56.507/2.2247 56.520/2.2252

1.575/0.0620 .017/.0007 .081/.0032

5M7298A

3 (Fl)

5C1000S Std.

5C1001S Std.

64.993/2.5588 65.007/2.5593

54.991/2.1650 55.042/2.1670 54.991/2.1650 55.042/2.1670

69.873/2.7509 69.887/2.7515

58.829/2.3161 58.879/2.3181 58.580/2.3063 58.631/2.3083

2.430/0.0957 .002/.0001 .046/.0018

1.880/0.0740

16.00/0.630

F23

CH-10-2

1.758/0.0692

16.00/0.630

F23

CH-10-3

F23

CH-23-1

F23

CH-10-1

F23

CH-10-3

Cam - 2003 on with 2nd design # 1 & 5 housing size of 2.3460"-2.3480". 1,5 54.991/2.1650 59.588/2.3460 2.260/0.0890 16.00/0.630 55.042/2.1670 59.639/2.3480 2,4 54.991/2.1650 59.080/2.3260 2.007/0.0790 16.00/0.630 54.042/2.1276 59.131/2.3280 3 54.991/2.1650 58.580/2.3063 1.758/0.0692 16.00/0.630 55.042/2.1670 58.631/2.3083

ENGINE

VIN CYL

305 (5.0) (305C) 351 (5.8) (D351) Diesel 351 (5.8) (351C/E/M) 379 401 (401M) 432 478 (D478/DH478) Diesel 478 (478M)

V6 V6 V6 V6 V6 V6 V6 V6

Bore x Stroke 4.250 x 3.578 4.563 x 3.578 4.563 x 3.578 4.563 x 3.859 4.875 x 3.578 4.875 x 3.859 5.125 x 3.859 5.125 x 3.859

TORQUE SETTINGS Connecting Rod 55-65 ft.lbs Diesel engines only. Connecting Rod 65-75 ft.lbs Gas engines only. Main Bearing 130-140 ft.lbs Gas engines except rear bearing cap.

Main Bearing 170-180 ft.lbs Diesel engines except rear bearing cap.

Main Bearing 55-65 ft.lbs Diesel engines rear cap only. Main Bearing 85-95 ft.lbs Gas engines rear bearing cap only.

6B586P Std. 10 20 30 40

Rod - to be discontinued when stock exhausted. 71.404/2.8112 76.606/3.0160 2.575/0.1014 .038/.0015 71.429/2.8122 76.619/3.0165 .102/.0040

228

23.87/0.940

F780

CB586P

GMC Type and Location

Standard Shaft Size

Max. Bearing Thickness

Housing Bore

Vertical Oil Clearance

ENGINE

VIN CYL

Bore x Stroke

350 (5.7) Oldsmobile Eng. Diesel 350 (5.7) Oldsmobile Eng. Diesel

N Z

4.06 x 3.39 4.06 x 3.39

V8 V8

Max. Overall Length

Material Code

Qty. Set

Bearing Shell No.

Engine Set No. Sizes Available

TORQUE SETTINGS

Connecting Rod 42 ft.lbs/57 Nm Main Bearing 120 ft.lbs/163 Nm

Rod 53.945/2.1238 53.970/2.1248

57.137/2.2495 57.150/2.2500

1.572/0.0619 .023/.0009 .087/.0034

Rod - .002" oversize OD version of 8B684P. 53.945/2.1238 57.188/2.2515 1.724/0.0679 .024/.0009 53.970/2.1248 57.201/2.2520 (@ .010" u/s) .088/.0035 Main 1 1

21.11/0.831

F780

9041 IH

80.975/3.1880 81.001/3.1890

2.377/0.0936 .013/.0005 .091/.0036

24.87/0.979

76.182/2.9993 76.208/3.0003

80.975/3.1880 81.001/3.1890

2.377/0.0936 .013/.0005 .091/.0036

24.87/0.979

F780

8512 U

24.87/0.979

F780

30.38/1.196

F780

41.28/1.625

F780

8512 IH 8508 IH 8509 U/L

.013/.0005 .091/.0036 .013/.0005 .091/.0036 .013/.0005 .091/.0036

8500 IH

76.182/2.9993 76.208/3.0003

2,4

F780

8507 L

Main - optional set to 5M804P with +0.010" overflange length increase. *See below for dimensional information. 1 76.182/2.9993 80.975/3.1880 2.377/0.0936 .013/.0005 24.87/0.979 F780 1 8507 76.208/3.0003 81.001/3.1890 .091/.0036 L 1 76.182/2.9993 80.975/3.1880 2.377/0.0936 .013/.0005 24.87/0.979 F780 1 8512 76.208/3.0003 81.001/3.1890 .091/.0036 U 2,4 76.182/2.9993 80.975/3.1880 2.377/0.0936 .013/.0005 24.87/0.979 F780 4 8512 76.208/3.0003 81.001/3.1890 .091/.0036 IH 3 (Fl) 76.182/2.9993 80.975/3.1880 2.377/0.0936 .013/.0005 30.63/1.206 F780 2 8519 76.208/3.0003 81.001/3.1890 .091/.0036 IH 5 76.175/2.9990 80.975/3.1880 2.377/0.0936 .013/.0005 41.28/1.625 F780 2 8509 76.200/3.0000 81.001/3.1890 .091/.0036 U/L Stock not available from fee warehouses.

8B684P Std. 10 20 30 40

8B684PO/S2 10 20 30 40

5M804P Std. 10 20 30 40

5M8519P 20 30 40

* DIMENSIONAL INFORMATION FOR 5M8519P Overall Width (Nominal) Increase in Width .020" u/s shaft 1.206" +0.010" .030" u/s shaft 1.206" +0.010" .040" u/s shaft 1.206" +0.010" Cam 1

51.707/2.0357 51.727/2.0365

55.067/2.1680 55.105/2.1695

1.640/0.0646

17.60/0.693

F23

O-7-1

51.199/2.0157 51.219/2.0165

54.560/2.1480 54.597/2.1495

1.640/0.0646

17.60/0.693

F23

O-6-2

50.691/1.9957 50.711/1.9965 50.183/1.9757 50.203/1.9765 49.675/1.9557 49.695/1.9565

54.051/2.1280 54.090/2.1295 53.543/2.1080 53.581/2.1095 53.035/2.0880 53.073/2.0895

1.640/0.0646

17.60/0.693

F23

O-6-3

1.640/0.0646

17.60/0.693

F23

O-6-4

1.640/0.0646

17.60/0.693

F23

O-6-5

4 5

5C1088S Std.

229

GMC Engine Set No. Sizes Available

Type and Location

Standard Shaft Size

Housing Bore

Max. Bearing Thickness

Vertical Oil Clearance

ENGINE

VIN CYL

Bore x Stroke

379 (6.2) Diesel 379 (6.2) Diesel 395 (6.5) Turbo Diesel 395 (6.5) Diesel 395 (6.5) Turbo Diesel 395 (6.5) Diesel 395 (6.5) (L65) Turbo Diesel

C J F P S Y F

3.98 x 3.82 3.98 x 3.82 4.06 x 3.82 4.06 x 3.82 4.06 x 3.82 4.06 x 3.82 4.06 x 3.82

V8 V8 V8 V8 V8 V8 V8

Max. Overall Length

Material Code

Qty. Set

Bearing Shell No.

TORQUE SETTINGS Connecting Rod 48 ft. lbs Main Bearing 100 ft.lbs (outer bolt - 6.2 diesel engine only)

Main Bearing 110 ft.lbs (inner bolt) Main Bearing 111 ft.lbs (outer bolt - 6.5 diesel engine only)

Rod

8B1286P

60.914/2.3982 60.940/2.3992

64.125/2.5246 64.150/2.5256

1.570/0.0618 .048/.0019 .120/.0047

22.91/0.902

F780

1292 IH

Main - For all 6.2L & 6.5L engines. 1,2,4 74.917/2.9495 79.825/3.1427 74.940/2.9504 79.850/3.1437 Std. .025 .25 .50 .75 1.0 3 (Fl) 74.917/2.9495 79.825/3.1427 74.940/2.9504 79.850/3.1437

2.425/0.0955 .040/.0016 .114/.0045 2.425/0.0955 .040/.0016 .114/.0045

22.78/0.897

F780

28.70/1.130

F780

2087 U/L 2089 U/L

74.912/2.9493 79.825/3.1427 2.425/0.0955 .045/.0018 74.937/2.9503 79.850/3.1437 .119/.0047 Overflange length remains constant for standard and undersizes.

35.33/1.391

F780

2088 U/L

2.030/0.0798

22.86/0.900

F23

GM-7-1

1.910/0.0753

19.81/0.780

F23

GM-7-2

Std. .025 .25 .50 .75

5M2091P

5C1199S

Cam 1

54.976/2.1644 55.024/2.1663 54.976/2.1644 55.024/2.1663

59.106/2.3270 59.157/2.3290 58.877/2.3180 58.928/2.3200

54.976/2.1644 55.024/2.1663

58.623/2.3080 58.674/2.3100

1.790/0.0703

19.81/0.780

F23

GM-7-3

54.976/2.1644 55.024/2.1663 50.975/2.0069 51.026/2.0089

58.369/2.2980 58.420/2.3000 54.381/2.1410 54.432/2.1430

1.660/0.0653

19.81/0.780

F23

GM-7-4

1.660/0.0655

19.81/0.780

F23

GM-7-5

25.40/1.000

F100

3864Y20

Std. 2

RB3864Y20 Semi

Small End - semi-finished - .020" bore stock allowance. 31.026/1.2215 33.139/1.3047 (Nominal) (Finished ID Size)

ENGINE

VIN CYL

Bore x Stroke

396 (6.5) 396 (6.5) 402 (6.6) 402 (6.6) 402 (6.6) 402 (6.6) 454 (7.4) 454 (7.4) 454 (7.4) 454 (7.4) 454 (7.4) 454 (7.4) 454 (7.4) 454 (7.4) 454 (7.4)

E Y

4.09 x 3.77 4.09 x 3.77 4.13 x 3.77 4.13 x 3.77 4.13 x 3.77 4.13 x 3.77 4.25 x 4.00 4.25 x 4.00 4.25 x 4.00 4.25 x 4.00 4.25 x 4.00 4.25 x 4.00 4.25 x 4.00 4.25 x 4.00 4.25 x 4.00

8B743A Std. 01 10 20 30 40

8B743AO/S2 10 20 30 40

E K U B E J L N S W Y Z

V8 V8 V8 V8 V8 V8 V8 V8 V8 V8 V8 V8 V8 V8 V8

TORQUE SETTINGS Connecting Rod 45-55 ft.lbs/61-75 Nm (all engines) Main Bearing 110-120 ft.lbs/150-163 Nm (High Performance)

Main Bearing 90-100 ft.lbs/122-136 Nm (except High Performance)

Rod - High strength Aluminum Silicon material. 55.855/2.1990 59.047/2.3247 1.575/0.0620 .017/.0007 55.880/2.2000 59.060/2.3252 .081/.0032

22.58/0.889

F810

7100A IH

Rod - .002" oversize OD version of 8B743A. 55.855/2.1990 59.098/2.3267 1.727/0.0680 .017/.0007 55.880/2.2000 59.111/2.3272 (@ .010" u/s) .081/.0032

22.58/0.889

F810

9100A IH

22.58/0.889

F780

7100 IH

22.58/0.889

F780

9100 IH

Rod

8B743P Std. 01 10 20 30 40

8B743PO/S2 10 20 30 40

55.855/2.1990 55.880/2.2000

59.047/2.3247 59.060/2.3252

1.575/0.0620 .017/.0007 .081/.0032

Rod - .002" oversize OD version of 8B743P. 55.855/2.1990 59.098/2.3267 1.727/0.0680 .017/.0007 55.880/2.2000 59.111/2.3272 (@ .010" u/s) .081/.0032

230

GMC Type and Location

Standard Shaft Size

Max. Bearing Thickness

Housing Bore

Vertical Oil Clearance

Max. Overall Length

Material Code

Qty. Set

Bearing Shell No.

Engine Set No. Sizes Available

(Contâ&#x20AC;&#x2122;d.) Main - optional set to 5M829P with +0.010" overflange length increase. *See below for dimensional information. 69.804/2.7482 74.600/2.9370 2.380/0.0937 .010/.0004 26.46/1.042 F780 8 7102 1,2,3,4 69.830/2.7492 74.625/2.9380 .087/.0034 U/L 5 (Fl)

69.794/2.7478 74.600/2.9370 69.820/2.7488 74.625/2.9380 Stock not available from fee warehouses.

.010" u/s shaft .020" u/s shaft .030" u/s shaft .040" u/s shaft

2.380/0.0937 .020/.0008 .097/.0038

46.25/1.821

F780

* DIMENSIONAL INFORMATION FOR 5M1745P Overall Width (Nominal) Increase in Width 1.821" +0.010" 1.821" +0.010" 1.821" +0.010" 1.821" +0.010"

26.46/1.042

5 (Fl)

46.00/1.811

F810

7103A U/L

26.46/1.042

F780

7102 U/L 7103 U/L

74.600/2.9370 74.625/2.9380

2.380/0.0937 .020/.0008 .097/.0038

Main - half groove set - standard oil clearance. 1,2,3,4 69.804/2.7482 74.600/2.9370 2.380/0.0937 69.830/2.7492 74.625/2.9380 5 (Fl) 69.794/2.7478 74.600/2.9370 2.380/0.0937 69.820/2.7488 74.625/2.9380 Overflange length remains constant for standard and undersizes. Cam 1 2,5 3,4

49.497/1.9487 49.522/1.9497 49.497/1.9487 49.522/1.9497 49.497/1.9487 49.522/1.9497

54.343/2.1395 54.369/2.1405 54.089/2.1295 54.115/2.1305 53.835/2.1195 53.861/2.1205

5M1745P 10 20 30 40

7105 U/L

Main - High strength Aluminum Silicon material. 69.804/2.7482 74.600/2.9370 2.380/0.0937 .010/.0004 1,2,3,4 69.830/2.7492 74.625/2.9380 .087/.0034 69.794/2.7478 69.820/2.7488

.010/.0004 .087/.0034 .020/.0008 .097/.0038

F810

7102A U/L

46.00/1.811

F780

2.390/0.0941

21.97/0.865

F23

CH-12-1

2.260/0.0891

25.02/0.985

F23

CH-12-2

2.140/0.0841

25.02/0.985

F23

CH-12-3

5M829A Std. 10 20 30 40

5M829P Std. 01 10 20 30 40

5C616S Std.

ENGINE

VIN CYL

Bore x Stroke

400 (6.6) 400 (6.6) 400 (6.6) 400 (6.6)

M R U X

4.13 x 3.75 4.13 x 3.75 4.13 x 3.75 4.13 x 3.75

V8 V8 V8 V8

TORQUE SETTINGS

Connecting Rod 45 ft. lbs/61 Nm Main Bearing 75 ft.lbs/102 Nm

Rod - High strength Aluminum Silicon material. 53.315/2.0990 56.507/2.2247 1.575/0.0620 .017/.0007 53.340/2.1000 56.520/2.2252 .081/.0032

21.25/0.837

Rod - .002" oversize OD version of 8B663A. 53.315/2.0990 56.558/2.2267 1.727/0.0680 .018/.0007 53.340/2.1000 56.571/2.2272 (@ .010" u/s) .082/.0032

21.25/0.837

Rod - standard oil clearance. 53.315/2.0990 56.507/2.2247 53.340/2.1000 56.520/2.2252

21.25/0.837

1.575/0.0620 .017/.0007 .081/.0032

Rod - .002" oversize OD version of 8B663P. 53.315/2.0990 56.558/2.2267 1.727/0.0680 .018/.0007 53.340/2.1000 56.571/2.2272 (@ .010" u/s) .082/.0032

231

F810

2376A

8B663A Std. 01 10 20 30 40

21.25/0.837

F810

F780

9026A IH 2376 IH 9026 IH

8B663AO/S2 10 20 30 40

8B663P Std. 01 10 20 30 40 50 60

8B663PO/S2 10 20 30 40

GMC Engine Set No. Sizes Available

Type and Location

Standard Shaft Size

Housing Bore

Max. Bearing Thickness

Vertical Oil Clearance

Max. Overall Length

Material Code

Qty. Set

Bearing Shell No.

23 (Contâ&#x20AC;&#x2122;d.) 5M1036P 10 20 30 40

67.257/2.6479 72.151/2.8406 67.280/2.6488 72.174/2.8415 Stock not available from fee warehouses.

.010" u/s shaft .020" u/s shaft .030" u/s shaft .040" u/s shaft

2.423/0.0954 .025/.0010 .097/.0038

Main - half groove - standard oil clearance. 1,2,3,4 67.269/2.6484 72.151/2.8406 2.423/0.0954 Std. 01 10 20 30 40 67.292/2.6493 72.174/2.8415 5 (Fl) 67.257/2.6479 72.151/2.8406 2.423/0.0954 67.280/2.6488 72.174/2.8415

F780

1036 U/L

7113 U/L 7115 U/L

* DIMENSIONAL INFORMATION FOR 5M1036P Overall Width (Nominal) Increase in Width 1.728" +0.010" 1.728" +0.010" 1.728" +0.010" 1.728" +0.010"

5M1038P

5M7155P

43.89/1.728

.013/.0005 .084/.0033 .025/.0010 .097/.0038

20.44/0.805

F780

43.64/1.718

F780

67.257/2.6479 72.151/2.8406 67.280/2.6488 72.174/2.8415 to be discontinued when stock exhausted.

2.423/0.0954 .025/.0010 .097/.0038

43.74/1.722

F780

7155 U/L

* DIMENSIONAL INFORMATION FOR 5M7155P Overall Width (Nominal) Increase in Width .040" u/s shaft 1.722" +0.004"

1C3346C Std.

1C3349C Std.

5C004AS Std.

5C004BS Std.

5C290S Std.

Cam - Single piece from 5C3346C set 47.452/1.8682 50.775/1.9990 1-5 47.478/1.8692 50.825/2.0010

Cam - Single piece from 5C3349C set (#1 cam). 47.452/1.8682 51.283/2.0190 1.895/0.0746 .025/.0010 47.478/1.8692 51.333/2.0210 .127/.0050

Std.

5C3349C Std.

19.05/0.750

F830

3346

19.05/0.750

F830

3349

19536

19537

Cam - standard housing bores. 47.452/1.8682 51.283/2.0190 1 47.478/1.8692 51.333/2.0210

1.890/0.0744

18.92/0.745

F23

CH-4-1

2,5

1.760/0.0694

18.92/0.745

F23

CH-4-2

1.640/0.0646

18.92/0.745

F23

CH-4-3

Cam - All housing bores constant at 1.9990"/2.0010" (High Performance) 47.452/1.8682 50.775/1.9990 1.641/0.0646 .025/.0010 19.05/0.750 1-5 47.478/1.8692 50.825/2.0010 .127/.0050

F830

3346

3,4

5C3346C

1.641/0.0646 .025/.0010 .127/.0050

47.452/1.8682 47.478/1.8692 47.452/1.8682 47.478/1.8692

51.029/2.0090 51.079/2.0110 50.775/1.9990 50.825/2.0010

Cam - standard housing bores (High Performance). 1 47.452/1.8682 51.283/2.0190 1.895/0.0746 47.478/1.8692 51.333/2.0210 2,5 47.452/1.8682 51.029/2.0090 1.768/0.0696 47.478/1.8692 51.079/2.0110 3,4

47.452/1.8682 47.478/1.8692

50.775/1.9990 50.825/2.0010

.025/.0010 .127/.0050 .025/.0010 .127/.0050

19.05/0.750

F830

3349

19.05/0.750

F830

3347

1.641/0.0646 .025/.0010 .127/.0050

19.05/0.750

F830

3346

232

GMC Type and Location

Standard Shaft Size

Max. Bearing Thickness

Housing Bore

Vertical Oil Clearance

Max. Overall Length

ENGINE

VIN CYL

Bore x Stroke

496 (8.1)

108mm x 111mm

Rod - .002" oversize OD version of 8B743A. 55.855/2.1990 59.098/2.3267 1.727/0.0680 .017/.0007 55.880/2.2000 59.111/2.3272 (@ .010" u/s) .081/.0032

22.58/0.889

3,4

Bearing Shell No.

F810

7100A IH

8B743AO/S2

5C616S

54.343/2.1395 54.369/2.1405

2.390/0.0941

21.97/0.865

F23

CH-12-1

49.497/1.9487 49.522/1.9497 49.497/1.9487 49.522/1.9497

54.089/2.1295 54.115/2.1305 53.835/2.1195 53.861/2.1205

2.260/0.0891

25.02/0.985

F23

CH-12-2

2.140/0.0841

25.02/0.985

F23

CH-12-3

10 20 30 40

Std.

VIN CYL

500 (8.2) Detroit Diesel (Fuel Pincher) Diesel 500 (8.2) Detroit Diesel (Fuel Pincher) Turbo Diesel

8B743A Std. 01 10 20 30 40

9100A IH

49.497/1.9487 49.522/1.9497

ENGINE

Engine Set No. Sizes Available

TORQUE SETTINGS

22.58/0.889

2,5

Qty. Set

Connecting Rod 22 ft.lbs + 90 deg Main Bearing 22 ft.lbs + 80 deg Outer studs Main Bearing 22 ft.lbs + 90 deg Inner bolts

Rod - High strength Aluminum Silicon material. 55.855/2.1990 59.047/2.3247 1.575/0.0620 .017/.0007 55.880/2.2000 59.060/2.3252 .081/.0032

Cam 1

Material Code

Bore x Stroke

4.25 x 4.41

TORQUE SETTINGS

Connecting Rod 59-70 ft. lbs/80-95 Nm Main Bearing Inner 103-108 ft. lbs/140-146 Nm Main Bearing Outer 66-76 ft. lbs/89-103 Nm

Rod 69.974/2.7549 70.000/2.7559

74.902/2.9489 74.915/2.9494

2.430/0.0950 .051/.0020 .127/.0050

Main 1,2,3,4

99.974/3.9360 106.426/4.1900 3.190/0.1260 100.000/3.9370 106.451/4.1910 5(Fl) 99.974/3.9360 106.426/4.1900 3.190/0.1260 100.000/3.9370 106.451/4.1910 Overflange length remains constant for standard and undersizes.

ENGINE 637 D637 / DH637 Diesel 637 Gas

VIN CYL V8 V8

.058/.0023 .135/.0053 .058/.0023 .135/.0053

Bore x Stroke 5.125 x 3.860 5.125 x 3.860

23.42/0.922

23.62/0.930 31.77/1.251

F780

F780 F780

8 2

CB1288P IH MB2881P U/L MB2882P U/L

8B1288P Std. .25 .50

5M1566P Std. .25 .50 .75

TORQUE SETTINGS

Connecting Rod 55-65 ft.lbs Diesel engines only. Connecting Rod 65-75 ft.lbs Gas engines only. Main Bearing 130-140 ft.lbs Gas engines except rear bearing cap.

Main Bearing 170-180 ft.lbs Diesel engines except rear bearing cap.

Main Bearing 55-65 ft.lbs Diesel engines rear cap only. Main Bearing 85-95 ft.lbs Gas engines rear bearing cap only. Rod - To be discontinued when stock exhautsted. 71.404/2.8112 76.606/3.0160 2.576/0.1014 .038/.0015 71.429/2.8122 76.619/3.0165 .102/.0040

23.87/0.940

Main - for 1966-72 engines only. To be discontinued when stock exhautsted. 79.342/3.1237 84.455/3.3250 2.527/0.0995 .040/.0016 29.46/1.160 1,2,3,5 79.367/3.1247 84.480/3.3260 .117/.0046 4 (Fl)

F780

Std. 10 20 30 40

MB2009P U/L

Std. 10 20

79.342/3.1237 84.455/3.3250 2.527/0.0995 .040/.0016 38.84/1.529 F780 2 MB2010P 79.367/3.1247 84.480/3.3260 .117/.0046 U/L On D637/DH637 diesel engines, undersize bearings listed above can be used but the original crankshaft surface hardness must be restored by a suitable process.

233

8B586P

CB586P IH

5M944P

HONDA HONDA ENGINE INDEX Engine Disp. 1169cc (1.2)......... 1237cc (1.2)......... 1237cc (1.2)......... 1335cc (1.3)......... 82 1342cc (1.3)..... 82 1342cc (1.3)..... 82 1342cc (1.3)..... 82 1342cc (1.3)..... 1487cc (1.5)......... 1487cc (1.5)......... 1487cc (1.5)......... 1487cc (1.5)......... 1487cc (1.5)......... 1487cc (1.5)......... 1487cc (1.5)......... 1487cc (1.5)......... 1487cc (1.5)......... 1487cc (1.5)......... 1493cc (1.5)......... 1493cc (1.5)......... 1493cc (1.5)......... 1493cc (1.5)......... 1493cc (1.5)......... 1493cc (1.5)......... 1493cc (1.5)......... 1590cc (1.6)......... 1590cc (1.6)......... 1590cc (1.6)......... 1590cc (1.6)......... 1590cc (1.6)......... 1590cc (1.6)......... 1590cc (1.6)......... 1595cc (1.6)......... 1598cc (1.6)......... 1599cc (1.6)......... 1599cc (1.6)......... 1606cc (1.6)......... 1668cc (1.7)......... 1668cc (1.7)......... 1668cc (1.7)......... 1668cc (1.7)......... 1700cc (1.7)......... 1700cc (1.7)......... 1700cc (1.7).........

Notation

VIN

(EB1) (EB2) (EB3) EJ/EJ1 D13A2 EV (D13A2) (EV1) D15A2/A3 EM1 EW1/3/4 (D15A2) (ED1) (ED2) (ED3) (ED4) (EM1) (EW1) D15B1 D15B1/B6 (D15B2) (D15B6) (D15B7) (D15B8) (D15Z1) DOHC (VTEC) (B16A2) DOHC (VTEC) (B16A3) (D16A6) (D16Y5) (D16Y7) (D16Y8) (VTEC) (D16Z6) DOHC (VTEC) (B16A2) EY EG (Canada) (EF1) EL1 (Canada) (D17A1) (D17A2) (D17A6) (D17A7) (D17A1) (D17A2) (D17A6)

Cyl. L4 L4 L4 L4 L4 L4 L4 L4 L4 L4 L4 L4 L4 L4 L4 L4 L4 L4 L4 L4 L4 L4 L4 L4 L4 L4 L4 L4 L4 L4 L4 L4 L4 L4 L4 L4 L4 L4 L4 L4 L4 L4 L4 L4

Year Line Engine Disp. 73-73 74-77 78-79 80-83 87-87 84-86 87-87 84-86 87-87 80-82 84-86 87-87 75-75 75-76 76-79 75-79 81-83 84-86 90-91 88-89 88-91 90-91 92-95 92-95 92-95 96-97 94-95 88-91 96-00 96-00 96-00 92-95 99-00 83-90 78-79 76-78 82-83 01-05 01-05 01-05 01-05 02-04 02-04 02-04

1 1 1 1 2 2 2 2 5 3 4 5 3 3 3 3 3 4 5 5 5 5 5 5 5 7 7 6 6 6 6 6 7 8 3 3 3 9 9 9 9 9 9 9

1700cc (1.7)......... 1751cc (1.8)......... 1751cc (1.8)......... 1829cc (1.8)......... 1829cc (1.8)......... 1829cc (1.8)......... 1829cc (1.8)......... 1829cc (1.8)......... 1829cc (1.8)......... 1955cc (2.0)......... 1955cc (2.0)......... 1955cc (2.0)......... 1955cc (2.0)......... 1955cc (2.0)......... 1955cc (2.0)......... 1955cc (2.0)......... 1958cc (2.0)......... 1958cc (2.0)......... 1997cc (2.0)......... 1998cc (2.0)......... 1998cc (2.0)......... 2056cc (2.1)......... 2156cc (2.2)......... 2156cc (2.2)......... 2156cc (2.2)......... 2156cc (2.2)......... 2156cc (2.2)......... 2156cc (2.2)......... 2156cc (2.2)......... 2156cc (2.2)......... 2157cc (2.2)......... 2234cc (2.3)......... 2254cc (2.3)......... 2254cc (2.3)......... 2254cc (2.3)......... 2259cc (2.3)......... 2354cc (2.4)......... 2354cc (2.4)......... 2354cc (2.4)......... 2400cc (2.4)......... 2400cc (2.4)......... 2559cc (2.6)......... 2675cc (2.7)......... 3165cc (3.2).........

Notation

VIN

(D17A7) EK1 (EK1) ES1 ES3 ET/ET2 (A18A1) (ES2) (ET2) A20A1/A20A3 BT1 BT2 (A20A1) (A20A3) (BS) (BT) B20A3/B20A5 (B20A5) (F20C1) K20A2 (K20A3) (B21A1) (F22A1) (F22A4) (F22A6) (F22B1) (F22B2) (F22B6) (H22A1) (H22A4) (F22C1) (F23A7) (F23A1) (F23A4) (F23A5) (H23A1) (K24A1) (K24A4) (K24A8) (K24A1) (K24A4) (4ZE1) (C27A4) (6VD1)

Cyl. L4 L4 L4 L4 L4 L4 L4 L4 L4 L4 L4 L4 L4 L4 L4 L4 L4 L4 L4 L4 L4 L4 L4 L4 L4 L4 L4 L4 L4 L4 L4 L4 L4 L4 L4 L4 L4 L4 L4 L4 L4 L4 V6 V6

Year Line 02-04 81-83 79-83 83-83 85-85 84-84 87-87 84-85 84-86 87-87 85-85 86-86 87-89 87-89 86-86 86-86 88-91 91-91 00-04 02-06 02-05 90-91 90-96 90-91 91-93 94-97 94-97 95-97 93-96 97-01 05-06 98-98 98-02 98-02 98-02 92-96 06-06 03-06 06-06 02-05 03-05 94-96 95-97 94-02

9 3 3 8 8 8 8 8 8 8 8 8 8 8 8 8 10 10 13 11 12 10 14 14 14 14 14 14 14 15 13 16 16 16 16 17 11 11 11 11 11 18 19 20

HONDA MODEL INDEX Model ACCORD

ACCORD - 10TH ANNIVERSARY ACCORD - 1800 LX ACCORD - 1800 SE-I ACCORD - 1800 STD ACCORD - 25TH ANNIVERSARY EDITION ACCORD - DX

ACCORD - EX

ACCORD - EX-R ACCORD - EXI ACCORD - LX

CID

Liter

Description

Years

1599 1751 1751 1829 1955

1.6 1.8 1.8 EK1 1.8 2.0

76-78 79-80 81-83 84-85 87

2156 1829 1829 1829 1829 1829

2.2 1.8 1.8 1.8 1.8 1.8

93 85 84 85 85 84

2156 1751 1955 2156 2254 2354 2156 2254 2354 2675 2156 2675 1955 1599 1751 1955

2.2 1.8 2.0 2.2 2.3 2.4 2.2 2.3 2.4 2.7 2.2 2.7 2.0 1.6 1.8 2.0

ES3 ET/ET2 ES3 ES3 ET/ET2

96 79-80 86-89 90-97 98-02 03-05 90-97 98-02 03-06 95-97 97 95-97 87-89 78 79-83 86-89

Model

CID

ACCORD - LX

ACCORD - LX SPECIAL EDITION ACCORD - LXI ACCORD - S ACCORD - SE ACCORD - SEI ACCORD - VALUE PACKAGE CIVIC 82 82

CIVIC - 1.3 CIVIC - 1300 82 CIVIC - 1300 DX CIVIC - 1500

234

Liter

2156 2254 2354 2675

2.2 2.3 2.4 2.7

Description

90-97 98-02 03-06 95-97

2354 1955 1829 1955 1751 2156 2254 1955

2.4 2.0 1.8 2.0 1.8 EK1 2.2 2.3 2.0

06 86-89 85 88-89 81-83 91-97 00-02 89

2254 2354 1237 1335 1342 1342 1487 1493 1493 1335 1335 1342 1335 1487 1487 1487

2.3 2.4 1.2 1.3 1.3 1.3 1.5 1.5 1.5 1.3 1.3 1.3 1.3 1.5 1.5 1.5

01-02 06 74-79 83 87 85-86 81-83 90-91 88-89 83 80-82 87 80-81 87 80 85

EJ/EJ1 D13A2 EV D15B1 D15B1/B6 EJ/EJ1 EJ/EJ1 D13A2 EJ/EJ1 D15A2/A3 EM1 EW1/3/4

Years

HONDA HONDA MODEL INDEX (Cont’d.) Model

CID

CIVIC - 1500 DX

CIVIC - 1500 GL CIVIC - 1500 S CIVIC - 1500 SI CIVIC - 4WD CIVIC - CVCC CIVIC - CX

CIVIC - DX

CIVIC - EX

CIVIC - GX CIVIC - HX CIVIC - LX

CIVIC - SE CIVIC - SI

CIVIC - VALUE PACKAGE CIVIC - VX CIVIC DEL SOL - S CIVIC DEL SOL - SI CIVIC DEL SOL - VTEC CR-V - EX CR-V - LX CR-V - SE CRX Type and Location

Standard Shaft Size

ENGINE 1169cc (1.2) (EB1) 1237cc (1.2) (EB2) 1237cc (1.2) (EB3) 1335cc (1.3) EJ/EJ1

Liter

1487 1487 1487 1493 1487 1487 1487 1487 1487 1590 1487 1493 1493 1493 1590 1342 1493 1590 1668 1700 1590 1590 1668 1700 1668 1700 1590 1668 1700 1493 1590 1668 1700 1493 1590 1590 1595 1998

1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.6 1.5 1.5 1.5 1.5 1.6 1.3 1.5 1.6 1.7 1.7 1.6 1.6 1.7 1.7 1.7 1.7 1.6 1.7 1.7 1.5 1.6 1.7 1.7 1.5 1.6 1.6 1.6 2.0

1668 1493 1493 1590 1590 1590 1590 2354 2400 2354 2400 2354 2400 1493

1.7 1.5 1.5 1.6 1.6 1.6 (VTEC) 1.6 DOHC (VTEC) 2.4 2.4 2.4 2.4 2.4 2.4 1.5

Housing Bore

Description D15A2/A3 EM1 EW1/3/4 D15B1/B6 EM1 EW1/3/4 EW1/3/4 D15A2/A3 EW1/3/4

D15B1 D15B1/B6

(VTEC)

D15B1/B6 (VTEC) DOHC (VTEC)

Max. Bearing Thickness

VIN CYL L4 L4 L4 L4

Years 87 80-82 84-86 88 80-82 84 84-85 87 86 88-91 75-79 92-95 90-91 89 96-00 84-87 88-95 96-00 01-05 02-04 90-00 92-95 01-05 02-04 01-05 02-04 96-00 01-05 02-04 88-95 96-00 01-05 02-04 88 89-91 92-95 99-00 02-05

Model

CID

Liter

1342 1487 1487 1487 1487 1493 1487 1487 1493 1493 1590 2400 2354 2400 2354 2400 2156 2234 2156 2234 2559 3165 3165 1751 1829 1829 2156 1958 1955 1955 1955 1958 1958 2056 1958 2156 1958 2259 2156 2056 2259 2056 2259 2056 1958 2156 1997 2157 1487 1487

1.3 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.6 2.4 2.4 2.4 2.4 2.4 2.2 2.3 2.2 2.3 2.6 3.2 3.2 1.8 1.8 1.8 2.2 2.0 2.0 2.0 2.0 2.0 2.0 2.1 2.0 2.2 2.0 2.3 2.2 2.1 2.3 2.1 2.3 2.1 2.0 2.2 2.0 2.2 1.5 1.5

CRX - 1300 CRX - 1500 CRX - 1500 HF CRX - 1500 SI CRX - DX CRX - HF CRX - SI ELEMENT ELEMENT - EX ELEMENT - LX ODYSSEY - EX ODYSSEY - LX PASSPORT - DX PASSPORT - EX PASSPORT - LX PRELUDE

PRELUDE - 2.0 S PRELUDE - 2.0 SI

PRELUDE - 2.0 SI 4WS PRELUDE - S PRELUDE - SE PRELUDE - SH PRELUDE - SI

05 92-95 93-95 96-97 96-97 93-95 94-97 06 02-05 06 02-05 06 05 91

PRELUDE - SI 4WS PRELUDE - SI ALB PRELUDE - SR PRELUDE - VTEC S2000 WAGOVAN

Vertical Oil Clearance

Bore x Stroke 70mm x 76mm 72mm x 76mm 72mm x 76mm 72mm x 82mm

Max. Overall Length

Material Code

Qty. Set

Description EV D15A2/A3 EW1/3/4 D15A2/A3 EW1/3/4 D15B1/B6 D15A2/A3 EW1/3/4

ES1 B20A3/B20A5 A20A1/A20A3 BT1 BT2 B20A3/B20A5 B20A3/B20A5 B20A3/B20A5

B20A3/B20A5

EW1/3/4

Bearing Shell No.

Years 84 87 84-86 87 85-86 88-89 87 85-86 88-90 90-91 88-91 03-04 06 05 04-06 05 95-97 98 95-97 98 94-96 94-02 94-02 79-82 84-87 83 97-01 88-90 87 85 86 91 88-90 90 88-89 92-96 91 95 97-01 91 92-96 90-91 92 90-91 90 93-96 00-03 05-06 84-87 86

Engine Set No. Sizes Available

TORQUE SETTINGS

Connecting Rod 18-21 ft.lbs/25-29 Nm Main Bearing 27-31 ft.lbs/37-42 Nm

Rod 39.982/1.5741 43.000/1.6929 1.499/0.0590 .023/.0009 17.52/0.690 F780 8 39.994/1.5746 43.025/1.6939 .086/.0034 Undersize bearings listed above can be used but the original crankshaft surface hardness must be restored by a suitable process. Main 1-5

50.012/1.9690 54.000/2.1260 1.999/0.0787 .025/.0010 19.94/0.785 F780 10 50.024/1.9694 54.024/2.1269 .086/.0034 Undersize bearings listed above can be used but the original crankshaft surface hardness must be restored by a suitable process.

235

4B1950

1950 IH

Std. .25 .50 .75 1.0

1952 IH

Std. .25 .50 .75

5M1952

HONDA Engine Set No. Sizes Available

Type and Location

Standard Shaft Size

Housing Bore

Max. Bearing Thickness

Vertical Oil Clearance

Max. Overall Length

Material Code

Qty. Set

Bearing Shell No.

2.49/0.098

F817

1952T IH

(Contâ&#x20AC;&#x2122;d.) Thrust

1T1952 Std. +0.125 +0.25

55.750/2.1949 77.600/3.0551 56.000/2.2047 77.850/3.0650 Note: Set includes two pieces, use on No. 1 position. Required with 5M1952 main set.

ENGINE

VIN CYL

82 1342cc (1.3) D13A2 82 1342cc (1.3) EV 82 1342cc (1.3) (D13A2) 82 1342cc (1.3) (EV1)

4B1930

L4 L4 L4 L4

Rod - for EV & D13A2 engines only. 39.980/1.5740 43.000/1.6929 40.000/1.5748 43.025/1.6939

Bore x Stroke 74mm x 78mm 74mm x 78mm 74mm x 78mm 74mm x 78mm

TORQUE SETTINGS Connecting Rod 20 ft. lbs/27 Nm (D13A2) Connecting Rod 23 ft. lbs/31 Nm (EV, EV1) Main Bearing 36 ft. lbs/49 Nm (D13A2) Main Bearing 48 ft. lbs/65 Nm (EV, EV1)

1.504/0.0592

18.50/0.728

F780

1930 IH

Rod - for EV1 engine only. 37.976/1.4951 41.000/1.6142 38.000/1.4961 41.020/1.6150

1.504/0.0592 .004/.0002 .074/.0029

18.50/0.728

F780

1931 IH

Main - for EV1 & D13A2 engines only. 1-5 44.980/1.7709 49.000/1.9291 Std. .25 .50 .75 1.0 45.000/1.7717 49.020/1.9299

2.001/0.0788 .018/.0007 .084/.0033

20.00/0.787

F780

1932 IH

Main - for EV engine only. 1-5 50.012/1.9690 54.000/2.1260 50.024/1.9694 54.024/2.1269

1.999/0.0787 .025/.0010 .086/.0034

19.94/0.785

F780

1952 IH

55.750/2.1949 77.600/3.0551 2.49/0.098 56.000/2.2047 77.850/3.0650 Note: Set includes two pieces, use on No.1 position. Required with 5M1932 & 5M1952 main sets.

F817

1952T IH

Std. .25 .50 .75

4B1931 Std. .25 .50

5M1932

5M1952 Std. .25 .50 .75

Thrust

1T1952 Std. +0.125 +0.25

ENGINE

VIN CYL

1487cc (1.5) EM1 1487cc (1.5) (ED1) 1487cc (1.5) (ED2) 1487cc (1.5) (ED3) 1487cc (1.5) (ED4) 1487cc (1.5) (EM1) 1599cc (1.6) EG (Canada) 1599cc (1.6) (EF1) 1606cc (1.6) EL1 (Canada) 1751cc (1.8) EK1 1751cc (1.8) (EK1)

L4 L4 L4 L4 L4 L4 L4 L4 L4 L4 L4

Bore x Stroke 74mm x 86.5mm 74mm x 86.5mm 74mm x 86.5mm 74mm x 86.5mm 74mm x 86.5mm 74mm x 86.5mm 74mm x 93mm 74mm x 93mm 77mm x 86mm 77mm x 94mm 77mm x 94mm

TORQUE SETTINGS Connecting Rod 18-21 ft.lbs/25-29 Nm Main Bearing 30-35 ft.lbs/41-48 Nm

Rod

4B1951

41.982/1.6528 41.994/1.6533

Std. .25 .50 .75 1.0

5M1952 Std. .25 .50 .75

45.000/1.7717 45.024/1.7726

1.496/0.0589 .014/.0006 .066/.0026

17.52/0.690

F780

1951 IH

Main 1-5

50.012/1.9690 54.000/2.1260 1.999/0.0787 .025/.0010 19.94/0.785 F780 10 1952 50.024/1.9694 54.024/2.1269 .086/.0034 IH Note: Crankshaft journals may be re-sized and ground to fit undersize bearings.However, it will be necessary to reharden the journal surfaces before re-assembling the engine. This may be done by nitriding or "Tufftriding"* (registered trademark of Kolene Corp.) Thrust

1T1952 Std. +0.125 +0.25

55.750/2.1949 77.600/3.0551 56.000/2.2047 77.850/3.0650 Note: Set includes two pieces, use on No.1 position. Required with 5M1952 main set.

ENGINE

VIN CYL

1487cc (1.5) EW1/3/4 1487cc (1.5) (EW1)

L4 L4

Bore x Stroke 74mm x 86.5mm 74mm x 86.5mm

2.49/0.098

F817

1952T IH

TORQUE SETTINGS Connecting Rod 19-22 ft.lbs/26-30 Nm Main Bearing 30-35 ft.lbs/41-48 Nm

Rod

4B1955 Std. .25 .50 .75 1.0

41.982/1.6528 41.994/1.6533

44.999/1.7716 45.024/1.7726

1.496/0.0589 .018/.0007 .079/.0031

236

18.45/0.726

F780

1955 IH

HONDA Type and Location

Standard Shaft Size

Max. Bearing Thickness

Housing Bore

Vertical Oil Clearance

Max. Overall Length

Material Code

Qty. Set

Bearing Shell No.

Engine Set No. Sizes Available

(Contâ&#x20AC;&#x2122;d.) Main 1-5

50.012/1.9690 50.024/1.9694

54.000/2.1260 54.024/2.1269

1.999/0.0787 .025/.0010 .086/.0034

19.94/0.785

F780

5M1952

1952 IH

Std. .25 .50 .75

1952T IH

Std. +0.125 +0.25

Thrust 55.750/2.1949 77.600/3.0551 56.000/2.2047 77.850/3.0650 Note: Set includes two pieces, use on No. 4 position. Required with 5M1952 main sets.

ENGINE

VIN CYL

1487cc (1.5) D15A2/A3 1487cc (1.5) (D15A2) 1493cc (1.5) D15B1 1493cc (1.5) D15B1/B6 1493cc (1.5) (D15B2) 1493cc (1.5) (D15B6) 1493cc (1.5) (D15B7) 1493cc (1.5) (D15B8) 1493cc (1.5) (D15Z1)

L4 L4 L4 L4 L4 L4 L4 L4 L4

Rod - for all engines except D15B6. 41.982/1.6528 44.999/1.7716 41.994/1.6533 45.024/1.7726 Main 1-5

44.980/1.7709 45.000/1.7717

49.000/1.9291 49.020/1.9299

2.49/0.098

Bore x Stroke

F817

1T1952

TORQUE SETTINGS

74mm x 86.5mm 74mm x 86.5mm 74mm x 86.5mm 74mm x 86.5mm 74mm x 86.5mm 74mm x 86.5mm 74mm x 86.5mm 74mm x 86.5mm 74mm x 86.5mm

Connecting Rod 20 ft.lbs/27 Nm (1987-89 engines) Connecting Rod 23 ft.lbs/31 Nm (1990-95 engines) Main Bearing 33 ft.lbs/45 Nm (1988-89 engines) Main Bearing 36 ft.lbs/49 Nm (1987 engines) Main Bearing 47 ft.lbs/64 Nm (1990-95 engines)

1.496/0.0589 .018/.0007 .079/.0031

18.45/0.726

2.001/0.0788 .018/.0007 .084/.0033

20.00/0.787

F780

4B1955

1955 IH

Std. .25 .50 .75 1.0

1932 IH

Std. .25 .50 .75 1.0

1952T IH

Std. +0.125 +0.25

5M1932

Thrust 55.750/2.1949 77.600/3.0551 56.000/2.2047 77.850/3.0650 Note: Set includes two pieces, use on No. 4 position. Required with 5M1932 main sets.

ENGINE

VIN CYL

1590cc (1.6) (D16A6) 1590cc (1.6) (D16Y5) 1590cc (1.6) (D16Y7) 1590cc (1.6) (D16Y8) 1590cc (1.6) (VTEC) (D16Z6)

L4 L4 L4 L4 L4

2.49/0.098

Bore x Stroke

F817

1T1952

TORQUE SETTINGS

75mm x 90mm 75mm x 90mm 75mm x 90mm 75mm x 90mm 75mm x 90mm

Connecting Rod 20 ft.lbs/27 Nm (1988-89 engines) Connecting Rod 23 ft.lbs/31 Nm (1990-95 engines) Main Bearing 33 ft.lbs/45 Nm (1988-89 engines) Main Bearing 47 ft.lbs/64 Nm (1990-95 engines) Connecting Rod 23 ft.lbs/31 Nm D16Y engines Main Bearing 18 ft.lbs D16Y engines - Step 1 Main Bearing 38 ft.lbs D16Y engines - Step 2

Rod

Main 1-5

44.980/1.7709 45.000/1.7717

48.000/1.8898 48.020/1.8905

1.504/0.0592 .020/.0008 .038/.0015

18.50/0.728

54.980/2.1646 55.000/2.1654

59.000/2.3228 59.020/2.3236

2.007/0.0790 .005/.0002 .072/.0028

20.00/0.787

Thrust 4

61.250/2.4114 81.750/3.2185 61.500/2.4213 82.000/3.2283 Note: Set includes two pieces, use on No. 4 position. Required with 5M1957 main set.

ENGINE

VIN CYL

1590cc (1.6) DOHC (VTEC) (B16A2) 1590cc (1.6) DOHC (VTEC) (B16A3) 1595cc (1.6) DOHC (VTEC) (B16A2) Rod - No oil holes in bearing. 44.980/1.7709 48.000/1.8898 45.000/1.7717 48.024/1.8907

2.50/0.098

F780

F817

Bore x Stroke

TORQUE SETTINGS

81mm x 77.5mm

Connecting Rod 23 ft.lbs Main Bearing 18 ft.lbs Step 1 Main Bearing 58 ft.lbs Step 2

81mm x 77.5mm

1.502/0.0591

19.50/0.768

237

F780

4B1956

1956 IH

Std. .25 .50 .75 1.0

1957 IH

Std. .25 .50 .75 1.0

1957T IH

5M1957

1T1957 Std.

1910 IH

4B1910 Std. .25 .50 .75 1.0

HONDA Engine Set No. Sizes Available

Type and Location

Housing Bore

54.980/2.1646 55.000/2.1654

59.000/2.3228 59.020/2.3236

61.250/2.4114 61.500/2.4213

81.750/3.2185 82.000/3.2283

Max. Bearing Thickness

Vertical Oil Clearance

Max. Overall Length

Material Code

Qty. Set

Bearing Shell No.

20.00/0.787

F780

1959 U/L

2.50/0.098

F817

1957T IH

(Contâ&#x20AC;&#x2122;d.) 5M1959

Main 1-5

Std. .25 .50 .75

1T1957

Thrust 4

Std.

Standard Shaft Size

ENGINE

VIN CYL

1598cc (1.6) EY 1829cc (1.8) ES1 1829cc (1.8) ES3 1829cc (1.8) ET/ET2 1829cc (1.8) (A18A1) 1829cc (1.8) (ES2) 1829cc (1.8) (ET2) 1955cc (2.0) A20A1/A20A3 1955cc (2.0) BT1 1955cc (2.0) BT2 1955cc (2.0) (A20A1) 1955cc (2.0) (A20A3) 1955cc (2.0) (BS) 1955cc (2.0) (BT)

4B1460P Std. .25 .50

4B1946 Std. .25 .50 .75 1.0

5M1947

L4 L4 L4 L4 L4 L4 L4 L4 L4 L4 L4 L4 L4 L4

Rod - for EY engines only. 41.973/1.6525 45.001/1.7717 41.998/1.6535 45.021/1.7725 Rod - for all engines except EY. 44.980/1.7709 48.000/1.8898 45.000/1.7717 48.024/1.8907 Main 1-5

Std. .25 .50 .75 1.0

49.980/1.9677 50.000/1.9685

54.000/2.1260 54.020/2.1268

2.007/0.0790

Bore x Stroke 80mm x 79.5mm 80mm x 91mm 80mm x 91mm 80mm x 91mm 80mm x 91mm 80mm x 91mm 80mm x 91mm 82.7mm x 91mm 82.7mm x 91mm 82.7mm x 91mm 82.7mm x 91mm 82.7mm x 91mm 82.7mm x 91mm 82.7mm x 91mm

TORQUE SETTINGS Connecting Rod 23 ft.lbs/31 Nm Main Bearing 48 ft.lbs/65 Nm (1983-85 engines) Main Bearing 49 ft.lbs/67 Nm (1986-89 engines)

1.503/0.0592 .020/.0008 .038/.0015

17.50/0.689

F780

CB1460P

1.504/0.0592

19.50/0.768

F780

1946 IH

2.004/0.0789

20.00/0.787

F780

1947 IH

2.49/0.098

F817

1952T IH

Thrust

1T1952 Std. +0.125 +0.25

55.750/2.1949 77.600/3.0551 56.000/2.2047 77.850/3.0650 Note: Set includes two pieces, use on No. 4 position. Required with 5M1947 main set.

ENGINE

VIN CYL

1668cc (1.7) (D17A1) 1668cc (1.7) (D17A2) 1668cc (1.7) (D17A6) 1668cc (1.7) (D17A7) 1700cc (1.7) (D17A1) 1700cc (1.7) (D17A2) 1700cc (1.7) (D17A6) 1700cc (1.7) (D17A7)

L4 L4 L4 L4 L4 L4 L4 L4

Bore x Stroke 75mm x 94.4mm 75mm x 94.4mm 75mm x 94.4mm 75mm x 94.4mm 75mm x 94.4mm 75mm x 94.4mm 75mm x 94.4mm 75mm x 94.4mm

TORQUE SETTINGS Connecting Rod 24 ft.lbs/32 Nm Main Bearing 18 ft.lbs/24 Nm Stage 1 Main Bearing 38 ft.lbs/51 Nm Stage 2

Rod

4B1980

44.976/1.7707 45.000/1.7717

48.000/1.8898 48.024/1.8907

1.502/0.0591 .018/.0007 .042/.0017

15.50/0.610

F780

1980 IH

54.980/2.1646 55.000/2.1654

59.000/2.3228 59.020/2.3236

2.007/0.0790 .005/.0002 .072/.0028

20.00/0.787

F780

1957 IH

61.250/2.4114 81.750/3.2185 61.500/2.4213 82.000/3.2283 Note: Set includes two pieces, use on No. 4 position. Required with 5M1957 main set.

2.50/0.098

F817

1957T IH

Std. .25 .50

5M1957

Main 1-5

Std. .25 .50 .75 1.0

1T1957 Std.

Thrust 4

238

HONDA Type and Location

Standard Shaft Size

Max. Bearing Thickness

Housing Bore

ENGINE

VIN CYL

1958cc (2.0) B20A3/B20A5 1958cc (2.0) (B20A5) 2056cc (2.1) (B21A1)

L4 L4 L4

Vertical Oil Clearance

Bore x Stroke 81mm x 95mm 81mm x 95mm 83mm x 95mm

Max. Overall Length

Rod - for SOHC engines only (B20A3). 44.980/1.7709 48.000/1.8898 45.000/1.7717 48.024/1.8907

19.50/0.768

54.980/2.1646 55.000/2.1654

59.000/2.3228 59.020/2.3236

2.007/0.0790 .005/.0002 .072/.0028

Thrust 4

61.250/2.4114 81.750/3.2185 61.500/2.4213 82.000/3.2283 Note: Set includes two pieces, use on No. 4 position. Required with 5M1957 main set.

ENGINE

VIN CYL

1998cc (2.0) K20A2 2354cc (2.4) (K24A1) 2354cc (2.4) (K24A4) 2354cc (2.4) (K24A8) 2400cc (2.4) (K24A1) 2400cc (2.4) (K24A4)

L4 L4 L4 L4 L4 L4

Rod - Race Series material 47.980/1.8890 51.004/2.0080 48.000/1.8898 51.024/2.0088

20.00/0.787

2.50/0.098

Bore x Stroke 86mm x 86mm 87mm x 99mm 87mm x 99mm 87mm x 99mm 87mm x 99mm 87mm x 99mm

1.500/0.0591 .020/.0008 .055/.0022

Bearing Shell No.

F780

F817

2.002/0.0788

Std. .25 .50 .75 1.0

1946 IH

Std. .25 .50 .75 1.0

1957 IH

Std. .25 .50 .75 1.0

1957T IH

ENGINE

VIN CYL

1998cc (2.0) (K20A3) Rod - Race Series material 44.976/1.7707 48.000/1.8898 45.000/1.7717 48.024/1.8907

Bore x Stroke 86mm x 86mm

1.502/0.0591 .032/.0013 .050/.0020

2.002/0.0788

15.40/0.606

2.50/0.098

Std.

F781

1972H IH

F780

1959H U/L

F817

1957T IH

4B1972H Std. .025 .25 .50

4B1972HX Std.

5M1959H Std. .025 .25

5M1959HX Std.

1T1957 Std.

TORQUE SETTINGS

Connecting Rod 14 ft.lbs + 90 deg Main Bearings 22 ft.lbs + 56 deg

15.50/0.610

20.00/0.787

239

1T1957

F781

1906H IH

Rod - Race Series material - bearings are 0.0005" thinner per half to give 0.001" extra clearance for standard sized cranks. 44.976/1.7707 48.000/1.8898 1.489/0.0586 .046/.0018 15.50/0.610 F781 8 1906HX 45.000/1.7717 48.024/1.8907 .063/.0025 IH Main - Race Series material 54.980/2.1646 59.000/2.3228 1-5 55.000/2.1654 59.020/2.3236

5M1957

TORQUE SETTINGS

Main - Race Series material - bearings are 0.0005" thinner per half to give 0.001" extra clearance for standard sized cranks. 54.980/2.1646 59.000/2.3228 1.989/0.0783 20.00/0.787 F780 10 1959HX 1-5 55.000/2.1654 59.020/2.3236 U/L 61.250/2.4114 81.750/3.2185 61.500/2.4213 82.000/3.2283 Note: Set includes two pieces, use on No. 4 position. Required with 5M1959H main set.

4B1946

Connecting Rod 14 ft.lbs + 90 deg Main Bearings 22 ft.lbs + 56 deg

20.00/0.787

Thrust 4

4B1936

1936 IH

Rod - Race Series material - bearings are 0.0005" thinner per half to give 0.001" extra clearance for standard sized cranks. 47.980/1.8890 51.004/2.0080 1.487/0.0585 .030/.0012 15.40/0.606 F781 8 1972HX 48.000/1.8898 51.024/2.0088 .090/.0035 IH Main - Race Series material 54.980/2.1646 59.000/2.3228 1-5 55.000/2.1654 59.020/2.3236

Engine Set No. Sizes Available

TORQUE SETTINGS

19.40/0.764

Main 1-5

Qty. Set

Connecting Rod 23 ft.lbs/31 Nm (B20A3 engine) Connecting Rod 34 ft.lbs/46 Nm (B20A5 & B21A1 engines) Main Bearings 49 ft.lbs/67Nm

Rod - for DOHC engines only (B20A5/B21A1). 47.955/1.8880 51.003/2.0080 1.504/0.0592 .020/.0008 47.976/1.8888 51.024/2.0088 .086/.0034 1.504/0.0592

Material Code

F780

1959H U/L

4B1906H Std. .025 .25 .50

4B1906HX Std.

5M1959H Std. .025 .25

HONDA Engine Set No. Sizes Available

Type and Location

Standard Shaft Size

Housing Bore

Max. Bearing Thickness

Vertical Oil Clearance

Max. Overall Length

Material Code

Qty. Set

Bearing Shell No.

12 (Contâ&#x20AC;&#x2122;d.)

5M1959HX Std.

1T1957 Std.

61.250/2.4114 81.750/3.2185 2.50/0.098 61.500/2.4213 82.000/3.2283 Note: Set includes two pieces, use on No. 4 position. Required with 5M1959H main set.

ENGINE

VIN CYL

1997cc (2.0) (F20C1) 2157cc (2.2) (F22C1)

4B1912H Std. .025 .25

4B1912HX Std.

5M1913H Std. .025 .25

5M1913HX Std.

L4 L4

Rod - Race Series material 47.980/1.8890 51.004/2.0080 48.000/1.8898 51.024/2.0088

Bore x Stroke 87mm x 84mm 87mm x 90.7mm

F817

1957T IH

TORQUE SETTINGS Connecting Rod 18 ft.lbs + 90 deg Main Bearing 16 ft.lbs 8 mm Bolts Main Bearings 22 ft.lbs + 60 deg

1.496/0.0589 .020/.0008 .055/.0022

19.40/0.764

F781

1912H IH

Rod - Race Series material - bearings are 0.0005" thinner per half to give 0.001" extra clearance for standard sized cranks. 47.980/1.8890 51.044/2.0096 1.483/0.0584 .045/.0018 19.40/0.764 F781 8 1912HX 48.000/1.8898 51.024/2.0088 .081/.0032 IH Main - Race Series material 54.976/2.1644 60.000/2.3622 1-5 55.000/2.1654 60.020/2.3630

2.504/0.0986 .030/.0012 .054/.0021

20.00/0.787

F780

1913H IH

Main - Race Series material - bearings are 0.0005" thinner per half to give 0.001" extra clearance for standard sized cranks. 54.976/2.1644 60.000/2.3622 2.504/0.0986 .030/.0012 20.00/0.787 F780 10 1913HX 1-5 55.000/2.1654 60.020/2.3630 .054/.0021 IH

ENGINE

VIN CYL

2156cc (2.2) (F22A1) 2156cc (2.2) (F22A4) 2156cc (2.2) (F22A6) 2156cc (2.2) (F22B1) 2156cc (2.2) (F22B2) 2156cc (2.2) (F22B6) 2156cc (2.2) (H22A1)

L4 L4 L4 L4 L4 L4 L4

Bore x Stroke 85mm x 95mm 85mm x 95mm 85mm x 95mm 85mm x 95mm 85mm x 95mm 85mm x 95mm 85mm x 95mm

TORQUE SETTINGS Connecting Rod 34 ft.lbs/46 Nm Main Bearing 52 ft.lbs/70 Nm

Rod

4B1936 Std. .25 .50 .75 1.0

5M1937

Main 1-5

Std. .25 .50

1T1937 Std.

47.955/1.8880 47.976/1.8888

51.003/2.0080 51.024/2.0088

1.504/0.0592 .020/.0008 .086/.0034

19.40/0.764

F780

1936 IH

49.980/1.9677 50.000/1.9685

54.000/2.1260 54.020/2.1268

2.004/0.0789

20.00/0.787

F780

1937 IH

2.49/0.098

F817

1937T IH

Thrust 4

57.650/2.2697 77.600/3.0551 57.900/2.2795 77.850/3.0650 Note: Set includes two pieces, use on No. 4 position. Required with 5M1937 main set.

ENGINE

VIN CYL

2156cc (2.2) (H22A4)

Bore x Stroke 85mm x 95mm

TORQUE SETTINGS Connecting Rod 34 ft.lbs/46 Nm Main Bearing Consult Service Manual

Rod

4B1912 Std. .25 .50

5M1957 Std. .25 .50 .75 1.0

Main 1-5

47.980/1.8890 48.000/1.8898

51.004/2.0080 51.024/2.0088

1.496/0.0589 .020/.0008 .055/.0022

19.40/0.764

F780

1912 IH

54.980/2.1646 55.000/2.1654

59.000/2.3228 59.020/2.3236

2.007/0.0790 .005/.0002 .072/.0028

20.00/0.787

F780

1957 IH

240

HONDA Type and Location

Standard Shaft Size

Max. Bearing Thickness

Housing Bore

Vertical Oil Clearance

Max. Overall Length

Material Code

Qty. Set

Bearing Shell No.

Engine Set No. Sizes Available

(Contâ&#x20AC;&#x2122;d.) Thrust 4

61.250/2.4114 81.750/3.2185 61.500/2.4213 82.000/3.2283 Note: Set includes two pieces. Required with 5M1957 main set.

ENGINE

VIN CYL

2234cc (2.3) (F23A7) 2254cc (2.3) (F23A1) 2254cc (2.3) (F23A4) 2254cc (2.3) (F23A5)

L4 L4 L4 L4

Rod - Race Series material. 44.976/1.7707 48.000/1.8898 45.000/1.7717 48.024/1.8907

2.50/0.098

Bore x Stroke

1957T IH

54.980/2.1646 55.000/2.1654

59.000/2.3228 59.020/2.3236

2.007/0.0790 .005/.0002 .072/.0028

Thrust 4

61.250/2.4114 81.750/3.2185 61.500/2.4213 82.000/3.2283 Note: Set includes two pieces, use on No. 4 position. Required with 5M1957 main set.

ENGINE

VIN CYL

2259cc (2.3) (H23A1)

Std.

Connecting Rod 34 ft.lbs/45 Nm Main Bearing 22 ft.lbs/30 Nm Stage 1 Main Bearing 58 ft.lbs/78 Nm Stage 2

15.50/0.610

F781

1906H IH

1T1957

TORQUE SETTINGS

86mm x 97mm 86mm x 97mm 86mm x 97mm 86mm x 97mm

1.502/0.0591 .032/.0013 .050/.0020

F817

20.00/0.787

2.50/0.098

Bore x Stroke

F780

F817

1957 IH 1957T IH

4B1906H Std. .025 .25 .50

4B1906HX Std.

5M1957 Std. .25 .50 .75 1.0

1T1957 Std.

TORQUE SETTINGS

87mm x 95mm

Connecting Rod 35 ft.lbs/47 Nm Main Bearing 22 ft.lbs/30 Nm Step 1 (tighten from center cap outwards)

Main Bearing 54 ft.lbs/73 Nm Step 2 Rod

Main 1-5

47.955/1.8880 47.976/1.8888

51.003/2.0080 51.024/2.0088

1.504/0.0592 .020/.0008 .086/.0034

19.40/0.764

49.980/1.9677 50.000/1.9685

54.000/2.1260 54.020/2.1268

2.004/0.0789

20.00/0.787

Thrust 4

57.650/2.2697 77.600/3.0551 57.900/2.2795 77.850/3.0650 Note: Set includes two pieces, use on No. 4 position. Required with 5M1937 main set.

ENGINE

VIN CYL

2559cc (2.6) (4ZE1)

2.49/0.098

Bore x Stroke

F780

F817

4B1936

1936 IH

Std. .25 .50 .75 1.0

1937 IH

Std. .25 .50

1937T IH

5M1937

1T1937 Std.

TORQUE SETTINGS

92.6mm x 95mm

Connecting Rod 43 ft.lbs/58 Nm Main Bearing 72 ft.lbs/98 Nm

Rod

Main 1-5

48.927/1.9263 48.940/1.9268

51.985/2.0466 52.005/2.0474

1.510/0.0594 .025/.0010 .084/.0033

22.00/0.866

55.919/2.2015 55.932/2.2020

59.980/2.3614 60.000/2.3622

2.008/0.0791 .032/.0013 .091/.0036

21.75/0.856

Thrust 3

63.750/2.5098 79.934/3.1470 64.000/2.5197 80.188/3.1570 Note: Set includes two pieces, use on No. 3 position. Required with 5M1824 set.

2.36/0.093

241

F780

F817

4B1820

1820 IH

Std. .25 .50 .75 1.0

1824 U/L

Std. .25 .50 .75 1.0

1824T IH

5M1824

1T1824 Std.

HONDA Engine Set No. Sizes Available

Type and Location

Standard Shaft Size

ENGINE

Housing Bore

VIN CYL

2675cc (2.7) (C27A4)

Max. Bearing Thickness

Vertical Oil Clearance

Bore x Stroke 87mm x 75mm

Max. Overall Length

Material Code

Qty. Set

Bearing Shell No.

TORQUE SETTINGS Connecting Rod 33 ft. lbs/45 Nm Main Bearing 29 ft.lbs/39 Nm (11mm bolts) Main Bearing 33 ft.lbs (Bridge bolts) Main Bearing 36 ft.lbs (Side bolts)

Rod

6B1935

51.981/2.0465 51.999/2.0472

Std. .25 .50 .75

4M1933 Std. .25 .50 .75

55.000/2.1654 55.025/2.1663

1.504/0.0592 .005/.0002 .072/.0028

Main - for engines with 2.7165" max housing bore. 1,2,3,4 63.974/2.5187 68.986/2.7160 2.505/0.0986 64.000/2.5197 69.000/2.7165

17.50/0.689

F780

1935 IH

20.00/0.787

F870

1933 U/L

2.50/0.098

F817

1934T IH

Thrust

1T1934 Std.

75.250/2.9626 93.750/3.6909 75.500/2.9724 94.000/3.7008 Note: Set includes two pieces, use on No. 3 position. Required with 4M1933 main set.

ENGINE

VIN CYL

3165cc (3.2) (6VD1)

Bore x Stroke 93.4mm x 77mm

TORQUE SETTINGS Connecting Rod 40 ft. lbs/54 Nm Main Bearing 29 ft.lbs/39 Nm

Rod

6B1840 Std. .25 .50 .75 1.0

4M1842

Main 1,4

Std. .25 .50 .75 1.0 2,3

53.922/2.1229 53.937/2.1235

56.982/2.2434 57.000/2.2441

1.513/0.0596 .019/.0007 .078/.0031

17.12/0.674

F780

1840 IH

63.919/2.5165 63.932/2.5170

68.979/2.7157 68.999/2.7165

2.527/0.0995 .025/.0010 .084/.0033

18.50/0.728

F780

1842 IH

63.919/2.5165 63.932/2.5170

68.979/2.7157 68.999/2.7165

2.527/0.0995 .025/.0010 .084/.0033

16.50/0.650

F780

1843 U/L

1.95/0.077

F817

1842T IH

Thrust

1T1842 Std.

71.000/2.7953 97.550/3.8405 71.250/2.8051 97.800/3.8504 Note: Set includes two pieces. Required with 4M1842 main set.

242

HONDA PERFORMANCE HONDA PERFORMANCE ENGINE INDEX Engine Disp. 1590cc (1.6)......... 1590cc (1.6)......... 1590cc (1.6)......... 1678cc (1.7)......... 1797cc (1.8)......... 1797cc (1.8)......... 1834cc (1.8)......... 1834cc (1.8)......... Type and Location

Notation

VIN

Cyl.

(D16A6) (D16Y5/7/8) VTEC (D16Z6) (B17A1) VTEC (B18C1) VTEC (B18C5) (B18A1) (B18B1)

Standard Shaft Size

L4 L4 L4 L4 L4 L4 L4 L4 Max. Bearing Thickness

Housing Bore

ENGINE

VIN CYL

1590cc (1.6) (D16A6) 1590cc (1.6) (D16Y5/7/8) 1590cc (1.6) VTEC (D16Z6)

Rod - Race Series. 44.980/1.7709 45.000/1.7717

L4 L4 L4

48.000/1.8898 48.020/1.8905

Year Line Engine Disp. 88-91 96-00 92-95

1 1 1 2 3 3 2 2

Notation

1997cc (2.0)......... 1998cc (2.0)......... 1998cc (2.0)......... 2156cc (2.2)......... 2157cc (2.2)......... 2234cc (2.3)......... 2354cc (2.4).........

Vertical Oil Clearance

Bore x Stroke 75mm x 90mm 75mm x 90mm 75mm x 90mm

1.499/0.0590 .020/.0008 .038/.0015

Max. Overall Length

VIN

(F20C1) VTEC (K20A2) IVTEC (K20A3) (H22A4) (F22C1) (F23A) VTEC (K24A)

Material Code

Qty. Set

L4 L4 L4 L4 L4 L4 L4

Bearing Shell No.

59.000/2.3228 59.020/2.3236

2.002/0.0788 .005/.0002 .072/.0028

18.50/0.728

20.00/0.787

61.250/2.4114 81.750/3.2185 2.50/0.098 61.500/2.4213 82.000/3.2283 Note: Set includes two pieces, use on No. 4 position. Required with 5M1957H/HX main set.

VIN CYL

Rod - Race Series. 44.980/1.7709 45.000/1.7717

L4 L4 L4

48.000/1.8898 48.024/1.8907

Bore x Stroke 81mm x 81mm 81mm x 89mm 81mm x 89mm

1.504/0.0592

F781

1956H IH

F780

1957H IH

F817

1957T IH

59.000/2.3228 59.020/2.3236

20.00/0.787

Std.

5M1957H Std. .025 .25

5M1957HX Std.

1T1957 Std.

F781

1946H IH

F780

1959H U/L

Main - Race Series. Bearings are .0005" thinner per half to give .001" extra clearance for standard sized crankshafts. 1-5 54.980/2.1646 59.000/2.3228 1.989/0.0783 20.00/0.787 F780 10 1959HX 55.000/2.1654 59.020/2.3236 U/L

243

4B1956HX

TORQUE SETTINGS

19.50/0.768

2.002/0.0788

4B1956H Std. .025 .25

Engine Set No. Sizes Available

Thrust 4

1678cc (1.7) (B17A1) 1834cc (1.8) (B18A1) 1834cc (1.8) (B18B1)

6 4 5 7 6 8 4

02-05 97-01 05-05 98-02 03-06

Main - Race Series. Bearings are .0005" thinner per half to give .001" extra clearance for standard sized crankshafts. 1-5 54.980/2.1646 59.000/2.3228 1.989/0.0783 .030/.0012 20.00/0.787 F780 10 1957HX 55.000/2.1654 59.020/2.3236 .097/.0038 IH

ENGINE

Year Line 00-04

TORQUE SETTINGS

Cyl.

4B1946H Std. .025 .25

4B1946HX Std.

5M1959H Std. .025 .25

5M1959HX Std.

HONDA PERFORMANCE Engine Set No. Sizes Available

Standard Shaft Size

Std.

Vertical Oil Clearance

Max. Overall Length

61.250/2.4114 81.750/3.2185 2.50/0.098 61.500/2.4213 82.000/3.2283 Note: Set includes two pieces, use on No. 4 position. Required with 5M1959H/HX main set.

ENGINE

4B1925H Std. .025 .25

4B1925HX Std.

5M1959H Std. .025 .25

5M1959HX Std.

1T1957 Std.

VIN CYL

Rod - Race Series. 44.976/1.7707 45.000/1.7717

Material Code

Qty. Set

Bearing Shell No.

F817

1957T IH

Main - Race Series. 1-5 54.980/2.1646 55.000/2.1654

Std. .025 .25 .50

4B1972HX Std.

5M1959H Std. .025 .25

5M1959HX Std.

1T1957 Std.

4B1906HX Std.

1.502/0.0591 .032/.0013 .050/.0020

17.50/0.689

59.000/2.3228 59.020/2.3236

2.002/0.0788

20.00/0.787

61.250/2.4114 81.750/3.2185 2.50/0.098 61.500/2.4213 82.000/3.2283 Note: Set includes two pieces, use on No. 4 position. Required with 5M1959H/HX main set.

VIN CYL

Rod - Race Series. 47.980/1.8890 48.000/1.8898

F781

1925H IH

F780

1959H U/L

L4 L4

51.004/2.0080 51.024/2.0088

Bore x Stroke 86mm x 86mm 87mm x 99mm

F817

1957T IH

TORQUE SETTINGS Connecting Rod Main Bearing 22 ft.lbs/30 Nm + 56 deg

1.500/0.0591 .020/.0008 .055/.0022

15.40/0.606

F781

1972H IH

59.000/2.3228 59.020/2.3236

2.002/0.0788

20.00/0.787

F780

1959H U/L

Main - Race Series. Bearings are .0005" thinner per half to give .001" extra clearance for standard sized cranks. 54.980/2.1646 59.000/2.3228 1.989/0.0783 20.00/0.787 F780 10 1959HX 1-5 55.000/2.1654 59.020/2.3236 U/L Thrust 4

61.250/2.4114 81.750/3.2185 61.500/2.4213 82.000/3.2283 Set includes two pieces. Required with 5M1959H/HX main set.

VIN CYL

1998cc (2.0) IVTEC (K20A3)

Std. .025 .25 .50

Connecting Rod 15 ft.lbs/20 Nm Stage 1 Connecting Rod 33 ft.lbs/45 Nm Stage 2 Main Bearing 22 ft.lbs/30 Nm Stage 1 (All bolts) Main Bearing 49 ft.lbs/66 Nm Stage 2 (Bolts #2, 3 & 4) Main Bearing 56 ft.lbs/76 Nm Stage 2 (Bolts #1 & 5)

Thrust 4

ENGINE

4B1906H

48.000/1.8898 (nominal)

81mm x 87.2mm 81mm x 87.2mm

TORQUE SETTINGS

ENGINE

4B1972H

L4 L4

Bore x Stroke

1998cc (2.0) VTEC (K20A2) 2354cc (2.4) VTEC (K24A)

Max. Bearing Thickness

Thrust 4

1797cc (1.8) VTEC (B18C1) 1797cc (1.8) VTEC (B18C5)

Housing Bore

(Contâ&#x20AC;&#x2122;d.) 1T1957

Type and Location

Rod - Race Series. 44.976/1.7707 45.000/1.7717

48.000/1.8898 48.024/1.8907

Bore x Stroke 86mm x 86mm

2.50/0.098

F817

1957T IH

TORQUE SETTINGS Connecting Rod 14 ft.lbs + 90 deg

1.502/0.0591 .032/.0013 .050/.0020

15.50/0.610

F781

1906H IH

244

HONDA PERFORMANCE Type and Location

Standard Shaft Size

Max. Bearing Thickness

Housing Bore

Vertical Oil Clearance

Max. Overall Length

Material Code

Qty. Set

Bearing Shell No.

Engine Set No. Sizes Available

(Contâ&#x20AC;&#x2122;d.) Main - Race Series. 54.980/2.1646 1-5 55.000/2.1654

59.000/2.3228 59.020/2.3236

2.002/0.0788

20.00/0.787

F780

1959H U/L

61.250/2.4114 81.750/3.2185 61.500/2.4213 82.000/3.2283 Set includes two pieces. Required with 5M1959H/HX main set.

ENGINE

VIN CYL

1997cc (2.0) (F20C1) 2157cc (2.2) (F22C1) Rod - Race Series. 47.980/1.8890 48.000/1.8898

L4 L4

51.004/2.0080 51.024/2.0088

2.50/0.098

Bore x Stroke

1957T IH

60.000/2.3622 60.020/2.3630

2.504/0.0986 .030/.0012 .054/.0021

VIN CYL

2156cc (2.2) (H22A4) Rod - Race Series. 47.980/1.8890 48.000/1.8898

51.004/2.0080 51.024/2.0088

Bore x Stroke 85mm x 95mm

1.496/0.0589 .020/.0008 .055/.0022

19.40/0.764

F781

1912H IH

20.00/0.787

F780

1913H IH

59.000/2.3228 59.020/2.3236

2.002/0.0788 .005/.0002 .072/.0028

61.250/2.4114 81.750/3.2185 61.500/2.4213 82.000/3.2283 Set includes two pieces. Required with 5M1957H/HX main set.

ENGINE

VIN CYL

2234cc (2.3) (F23A)

Rod - Race Series. 44.976/1.7707 45.000/1.7717

48.000/1.8898 48.024/1.8907

Bore x Stroke

1.502/0.0591 .032/.0013 .050/.0020

245

4B1912H Std. .025 .25

4B1912HX Std.

5M1913H Std. .025 .25

5M1913HX Std.

Connecting Rod 34 ft.lbs/46 Nm Main Bearing Consult Service Manual

19.40/0.764

20.00/0.787

2.50/0.098

86mm x 97mm

Std.

F781

1912H IH

F780

1957H IH

1T1957

TORQUE SETTINGS

Rod - Race Series. Bearings are .0005" thinner per half to give .001" extra clearance for standard sized cranks. 47.980/1.8890 51.044/2.0096 1.483/0.0584 .045/.0018 19.40/0.764 F781 8 1912HX 48.000/1.8898 51.024/2.0088 .081/.0032 IH Main - Race Series. 54.980/2.1646 1-5 55.000/2.1654

Std.

Connecting Rod 18 ft.lbs + 90 deg Main Bearing 16 ft.lbs 8 mm Bolts Main Bearings 22 ft.lbs + 60 deg

Main - Race Series. Bearings are .0005" thinner per half to give .001" extra clearance for standard sized cranks. 54.976/2.1644 60.000/2.3622 2.504/0.0986 .030/.0012 20.00/0.787 F780 10 1913HX 1-5 55.000/2.1654 60.020/2.3630 .054/.0021 IH

ENGINE

5M1959HX

5M1959H Std. .025 .25

TORQUE SETTINGS

87mm x 84mm 87mm x 90.7mm

1.496/0.0589 .020/.0008 .055/.0022

F817

1957T IH

4B1912H Std. .025 .25

4B1912HX Std.

5M1957H Std. .025 .25

5M1957HX Std.

1T1957 Std.

TORQUE SETTINGS

Connecting Rod 34 ft.lbs/45 Nm Main Bearing 22 ft.lbs/30 Nm Stage 1 Main Bearing 58 ft.lbs/78 Nm Stage 2

15.50/0.610

F781

1906H IH

4B1906H Std. .025 .25 .50

HONDA PERFORMANCE Engine Set No. Sizes Available

Type and Location

Standard Shaft Size

Housing Bore

Max. Bearing Thickness

Vertical Oil Clearance

Max. Overall Length

Material Code

Qty. Set

Bearing Shell No.

(Contâ&#x20AC;&#x2122;d.)

4B1906HX Std.

5M1957H Std. .025 .25

5M1957HX Std.

1T1957 Std.

59.000/2.3228 59.020/2.3236

2.002/0.0788 .005/.0002 .072/.0028

20.00/0.787

F780

1957H IH

61.250/2.4114 81.750/3.2185 2.50/0.098 61.500/2.4213 82.000/3.2283 Note: Set includes two pieces, use on No. 4 position. Required with 5M1957H/HX main set.

246

F817

1957T IH

HUMMER HUMMER ENGINE INDEX Engine Disp.

Notation

211 3460cc (3.5)... 364 (6.0) ...............

VIN

Cyl.

6 U

L5 V8

Year Line Engine Disp. 06-06 03-06

1 2

395 (6.5) ...............

Notation

VIN

Cyl.

Turbo,Diesel

Year Line 02-04

HUMMER MODEL INDEX Model H1 - 4 PASSENGER HARD DOOR OPEN TOP H2 Type and Location

CID

Liter

Description

Years

Model H3

395 364

Standard Shaft Size

6.5 6.0

CID

Liter

211

3460

3.5

Description

Years 06

02-04 03-06 Max. Bearing Thickness

Housing Bore

Vertical Oil Clearance

Max. Overall Length

ENGINE

VIN CYL

Bore x Stroke

211 3460cc (3.5)

93.0mm x 101.6mm

Material Code

Qty. Set

Bearing Shell No.

Engine Set No. Sizes Available

TORQUE SETTINGS

Rod 56.694/2.2320 56.707/2.2326

60.322/2.3749 60.338/2.3755

1.802/0.0709 .011/.0004 .059/.0023

Rod - .002" oversize OD version of 5B2290A. 56.691/2.2319 60.372/2.3768 1.952/0.0769 .011/.0004 56.707/2.2326 60.388/2.3775 (@ 0.25mm u/size) .059/.0023

20.75/0.817

ENGINE

VIN CYL

Bore x Stroke

364 (6.0)

101.6mm x 92mm

F810

5B2290A

2290A IH

Std. .25 .50 .75

5B2290AO/S2

9102A IH

.25 .50 .75 1.0

TORQUE SETTINGS

Connecting Rod 15 ft.lbs/20 Nm + 60 deg. Main Bearing Consult service manual

Rod - High Strength Aluminum Silicon material. 53.315/2.0990 56.507/2.2247 1.575/0.0620 .017/.0007 53.340/2.1000 56.520/2.2252 .081/.0032

21.25/0.837

Rod - .002" oversize OD version of 8B663A. 53.315/2.0990 56.558/2.2267 1.727/0.0680 .018/.0007 53.340/2.1000 56.571/2.2272 (@ .010" u/s) .082/.0032

21.25/0.837

F810

2376A

8B663A Std. 01 10 20 30 40

F810

9026A IH

8B663AO/S2 10 20 30 40

Rod 53.315/2.0990 53.340/2.1000

56.507/2.2247 56.520/2.2252

1.575/0.0620 .017/.0007 .081/.0032

21.25/0.837

F780

2376 IH

Rod - .002" oversize OD version of 8B663P. 53.315/2.0990 56.558/2.2267 1.727/0.0680 .018/.0007 53.340/2.1000 56.571/2.2272 (@ .010" u/s) .082/.0032

21.25/0.837

Main - High Strength Aluminum Silicon material. 1,2,4,5 64.993/2.5588 69.873/2.7509 2.430/0.0957 .006/.0002 65.007/2.5593 69.887/2.7515 .046/.0018

20.45/0.805

3 (Fl)

26.10/1.028

F810

7299A U/L

Cam - 1997-2003 with 1st design # 1 & 5 housing size of 2.3260"-2.3280". 54.991/2.1650 59.080/2.3260 2.007/0.0790 16.00/0.630 1,5 55.042/2.1670 59.131/2.3280

F23

CH-10-1

2,4

64.993/2.5588 65.007/2.5593

9026 IH 7298A U/L

F23

CH-10-2

1.758/0.0692

16.00/0.630

F23

CH-10-3

Cam - 2003 on with 2nd design # 1 & 5 housing size of 2.3460"-2.3480". 54.991/2.1650 59.588/2.3460 2.260/0.0890 16.00/0.630 1,5 55.042/2.1670 59.639/2.3480

F23

CH-23-1

2,4 3

59.080/2.3260 59.131/2.3280 58.580/2.3063 58.631/2.3083

10 20 30 40

5M7298A Std. 10 20 30 40

5C1000S

5C1001S Std.

2.007/0.0790

16.00/0.630

F23

CH-10-1

1.758/0.0692

16.00/0.630

F23

CH-10-3

247

8B663PO/S2

Std.

16.00/0.630

54.991/2.1650 54.042/2.1276 54.991/2.1650 55.042/2.1670

58.829/2.3161 58.879/2.3181 58.580/2.3063 58.631/2.3083

2.430/0.0957 .002/.0001 .046/.0018

F810

1.880/0.0740

54.991/2.1650 55.042/2.1670 54.991/2.1650 55.042/2.1670

69.873/2.7509 69.887/2.7515

F780

8B663P Std. 01 10 20 30 40 50 60

HUMMER Engine Set No. Sizes Available

Type and Location

Standard Shaft Size

Housing Bore

Max. Bearing Thickness

Vertical Oil Clearance

ENGINE

VIN CYL

Bore x Stroke

395 (6.5) Turbo Diesel

4.06 x 3.82

Max. Overall Length

Material Code

Qty. Set

Bearing Shell No.

TORQUE SETTINGS Connecting Rod 48 ft. lbs Main Bearing 100 ft.lbs (outer bolt - 6.2 diesel engine only)

Main Bearing 110 ft.lbs (inner bolt) Main Bearing 111 ft.lbs (outer bolt - 6.5 diesel engine only) Rod

8B1286P

60.914/2.3982 60.940/2.3992

Std. .025 .25 .50 .75

64.125/2.5246 64.150/2.5256

1.570/0.0618 .048/.0019 .120/.0047

5M2091P

5C1199S

Cam 1

Std. 2 3 4 5

RB3864Y20 Semi

.040/.0016 .114/.0045 .040/.0016 .114/.0045 .045/.0018 .119/.0047

22.91/0.902

F780

1292 IH

22.78/0.897

F780

28.70/1.130

F780

35.33/1.391

F780

2087 U/L 2089 U/L 2088 U/L

54.976/2.1644 55.024/2.1663

59.106/2.3270 59.157/2.3290

2.030/0.0798

22.86/0.900

F23

GM-7-1

54.976/2.1644 55.024/2.1663 54.976/2.1644 55.024/2.1663 54.976/2.1644 55.024/2.1663 50.975/2.0069 51.026/2.0089

58.877/2.3180 58.928/2.3200 58.623/2.3080 58.674/2.3100 58.369/2.2980 58.420/2.3000 54.381/2.1410 54.432/2.1430

1.910/0.0753

19.81/0.780

F23

GM-7-2

1.790/0.0703

19.81/0.780

F23

GM-7-3

1.660/0.0653

19.81/0.780

F23

GM-7-4

1.660/0.0655

19.81/0.780

F23

GM-7-5

25.40/1.000

F100

3864Y20

Small End - semi-finished - .020" bore stock allowance. 31.026/1.2215 33.139/1.3047 (Finished ID Size) (Nominal)

248

HYUNDAI HYUNDAI ENGINE INDEX Engine Disp. 85 1393cc (1.4)..... 1468cc (1.5)......... 1468cc (1.5)......... 1468cc (1.5)......... 1495cc (1.5)......... 1495cc (1.5)......... 1495cc (1.5)......... 1495cc (1.5)......... 1596cc (1.6)......... 1596cc (1.6)......... 1600cc (1.6)......... 1600cc (1.6)......... 1795cc (1.8).........

Notation

VIN

Cyl.

Mits 4G33 4G15/G4DJ G15B/G4AJ G15B/G4AJ G4EK G4EK, Turbo (G4EK) DOHC (G4FK) Mits G32B G4CR G4ED G4ED G4GM

E J J K N N N

L4 L4 L4 L4 L4 L4 L4 L4 L4 L4 L4 L4 L4

K R C N M

Year Line Engine Disp. 83-87 90-94 86-89 86-86 93-97 93-95 98-02 96-98 84-87 92-95 02-05 01-01 96-98

1 2 2 2 3 3 3 3 5 4 3 3 6

1836cc (1.8)......... 1975cc (2.0)......... 1975cc (2.0)......... 1997cc (2.0)......... 1997cc (2.0)......... 2351cc (2.4)......... 2351cc (2.4)......... 2351cc (2.4)......... 2493cc (2.5)......... 2656cc (2.7)......... 2972cc (3.0)......... 2972cc (3.0)......... 3500cc (3.5).........

Notation

VIN

Cyl.

G4CN G4GC G4GF G4CP (G4CP) G4JS G4CS G4JS G6BV G6BA G6AT (G6AT) G6CU

L4 L4 L4 L4 L4 L4 L4 L4 V6 V6 V6 V6 V6

F F S S V T T

Year Line 93-95 01-05 97-00 92-97 98-01 01-05 89-91 99-03 99-01 01-05 90-97 98-98 02-05

4 6 6 7 7 9 8 9 10 10 11 11 12

HYUNDAI MODEL INDEX Model

CID

ACCENT ACCENT - GL ACCENT - GLS ACCENT - GS ACCENT - GT ACCENT - L ELANTRA ELANTRA - GL ELANTRA - GLS

ELANTRA - GT EXCEL EXCEL - CX EXCEL - CXL EXCEL - GL EXCEL - GLS EXCEL - GS EXCEL - L PONY

PONY - GL DELUXE

PONY - GLS GLORY

PONY - L

SANTA FE

Type and Location

Standard Shaft Size

Liter

1495 1495 1600 1495 1600 1495 1495 1600 1495 1596 1795 1836 1596 1836 1596 1795 1836 1975 1975 1468 1468 1468 1468 1468 1468 1468 1468 1468 1468 1393 1596 1393 1596 1393 1468 1596 1393 1468 2351 2656 3500

1.5 1.5 1.6 1.5 1.6 1.5 1.5 1.6 1.5 1.6 1.8 1.8 1.6 1.8 1.6 1.8 1.8 2.0 2.0 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.4 1.6 1.4 1.6 1.4 1.5 1.6 1.4 1.5 2.4 2.7 3.5

Description G4EK G4ED G4EK G4ED G4EK G4EK G4ED G4EK G4CR G4GM G4CN G4CR G4CN G4CR G4GM G4CN G4GC G4GC 4G15/G4DJ 4G15/G4DJ 4G15/G4DJ 4G15/G4DJ G15B/G4AJ 4G15/G4DJ G15B/G4AJ 4G15/G4DJ 4G15/G4DJ G15B/G4AJ Mits 4G33 Mits G32B Mits 4G33 Mits G32B Mits 4G33 G15B/G4AJ Mits G32B Mits 4G33 G15B/G4AJ G4JS G6BA G6CU

Max. Bearing Thickness

Housing Bore

Years 98-02 95-96 01-04 95-97 05 97 96-97 05 95-97 92-95 96-97 93-95 92-95 93-95 92 96-97 93-95 04-05 04-05 91-94 93-94 92-94 90-94 86-89 90-91 86-89 92-94 90-92 86-89 84-85 84 83-85 87 83 86 85 83-87 86 01-04 01-05 03-05

Model

SCOUPE - LS SONATA

SONATA - DELUXE SONATA - GL

SONATA - GLS

SONATA - LX SONATA - SPORT DELUXE STELLAR - GSL SUPER STELLAR - SL DELUXE TIBURON TIBURON - FX TIBURON - GS TIBURON - GT TIBURON - SE TUCSON - GL TUCSON - GLS TUCSON - LX XG350 XG350 - L

Vertical Oil Clearance

ENGINE

VIN CYL

Bore x Stroke

85 1393cc (1.4) Mits 4G33

73mm x 86mm

CID

SCOUPE

Max. Overall Length

Material Code

Liter

1468 1495 1468 1495 1997 1997 2351 2351 2493 2656 2972 2972 2351 1997 2351 2351 2656 2972 1997 2351 2656 2972 2656

1.5 1.5 1.5 1.5 2.0 2.0 2.4 2.4 2.5 2.7 3.0 3.0 2.4 2.0 2.4 2.4 2.7 3.0 2.0 2.4 2.7 3.0 2.7

2351

2.4 G4CS

1468 1596

1.5 G15B/G4AJ 1.6 Mits G32B

86 85

1468 1596 1795 1975 1997 1997 1975 2656 2656 1975 2656 2656 3500 3500

1.5 1.6 1.8 2.0 2.0 2.0 2.0 2.7 2.7 2.0 2.7 2.7 3.5 3.5

86 85 97 03-04 98-01 98 05 03-05 05 05 05 05 02-05 02-04

Qty. Set

Description 4G15/G4DJ G4EK 4G15/G4DJ G4EK G4CP G4CS G4JS G6BV G6BA G6AT G4CS G4CP G4CS G4JS G6BA G6AT G4CP G4CS G6BA G6AT G6BA

G15B/G4AJ Mits G32B G4GM G4GC G4GC G6BA G6BA G4GC G6BA G6BA G6CU G6CU

Bearing Shell No.

Years 91-92 93-95 91-92 94-95 98 92-97 89-91 99-04 99-01 02-04 98 90-94 89 92-97 89-91 05 05 90-97 92-94 89-91 02-05 90-97 05

Engine Set No. Sizes Available

TORQUE SETTINGS

Connecting Rod 23-25 ft.lbs/31-34 Nm Main Bearing 36-40 ft.lbs/49-54 Nm

Rod 44.991/1.7713 45.000/1.7717

48.000/1.8898 48.020/1.8905

1.494/0.0588 .012/.0005 .067/.0026

249

23.50/0.925

F810

1146A IH

4B1146 Std. .25 .50 .75 1.0

HYUNDAI Engine Set No. Sizes Available

Type and Location

Housing Bore

56.980/2.2433 57.000/2.2441

61.000/2.4016 61.020/2.4024

56.980/2.2433 57.000/2.2441

61.000/2.4016 61.020/2.4024

Max. Bearing Thickness

Vertical Oil Clearance

Max. Overall Length

Material Code

Qty. Set

Bearing Shell No.

1.990/0.0783 .020/.0008 .086/.0034

23.00/0.906

F810

1147A IH

1.990/0.0783 .020/.0008 .086/.0034

28.95/1.140

F810

1148A IH

(Contâ&#x20AC;&#x2122;d.) 5M1147

Main 1,2,4,5

Std. .25 .50 .75 1.0 3 (Fl)

Standard Shaft Size

ENGINE

VIN CYL

Bore x Stroke

1468cc (1.5) 4G15/G4DJ 1468cc (1.5) G15B/G4AJ 1468cc (1.5) G15B/G4AJ

J J K

76mm x 82mm 76mm x 82mm 76mm x 82mm

4B1130 Std. .25 .50 .75 1.0

4B1736 Std. .25 .50 .75 1.0

5M1124

L4 L4 L4

TORQUE SETTINGS Connecting Rod 23-25 ft.lbs/31-34 Nm Main Bearing 36-40 ft.lbs/49-54 Nm

Rod - for engines from 1989-94. 41.981/1.6528 45.000/1.7717 42.000/1.6535 45.020/1.7724

1.493/0.0588 .015/.0006 .079/.0031

15.60/0.614

F810

1130A IH

Rod - for engines from 1986 - 88 only. 41.981/1.6528 45.000/1.7717 42.000/1.6535 45.020/1.7724

1.493/0.0588 .015/.0006 .071/.0028

17.63/0.694

F820

1736AL IH

1.990/0.0783 .020/.0008 .085/.0033

19.13/0.753

F810

1124A U/L

47.981/1.8890 52.000/2.0472 1.990/0.0783 .020/.0008 48.000/1.8898 52.020/2.0480 .085/.0033 Overflange length remains constant for standard and undersizes.

23.95/0.943

F810

1125A IH

Main 1,2,4,5

Std. .25 .50 .75

47.981/1.8890 48.000/1.8898

52.000/2.0472 52.020/2.0480

3(Fl)

ENGINE

VIN CYL

Bore x Stroke

1495cc (1.5) G4EK 1495cc (1.5) G4EK Turbo 1495cc (1.5) (G4EK) 1495cc (1.5) DOHC (G4FK) 1600cc (1.6) G4ED 1600cc (1.6) G4ED

N N N

75.5mm x 83.5mm 75.5mm x 83.5mm 75.5mm x 83.5mm 75.5mm x 83.5mm 75.5mm x 83.5mm 75.5mm x 83.5mm

C N

L4 L4 L4 L4 L4 L4

TORQUE SETTINGS Connecting Rod 26-28 ft.lbs/35-38 Nm (Tighten evenly in two or three steps)

Main Bearing 41-44 ft.lbs/55-60 Nm

Rod

4B1201

44.975/1.7707 44.990/1.7713

48.000/1.8898 48.020/1.8905

1.495/0.0589 .020/.0008 .071/.0028

19.12/0.753

F780

1201 IH

49.977/1.9676 49.992/1.9682

54.000/2.1260 54.020/2.1268

1.994/0.0785 .020/.0008 .071/.0028

18.13/0.714

F780

1202 U/L

49.977/1.9676 54.000/2.1260 1.994/0.0785 .020/.0008 49.992/1.9682 54.020/2.1268 .071/.0028 Overflange length remains constant for standard and undersizes.

22.92/0.902

F780

1203 U/L

Std. .25 .50 .75

5M1202

Main 1,2,4,5

Std. .25 .50 .75 3 (Fl)

ENGINE

VIN CYL

Bore x Stroke

1596cc (1.6) G4CR 1836cc (1.8) G4CN

R M

82.3mm x 75mm 81.5mm x 88mm

L4 L4

TORQUE SETTINGS Connecting Rod 37-39 ft.lbs/50-53 Nm (Tighten evenly in two or three steps)

Main Bearing 48-52 ft.lbs/65-70 Nm Rod

4B1146

44.991/1.7713 45.000/1.7717

48.000/1.8898 48.020/1.8905

1.494/0.0588 .012/.0005 .067/.0026

23.50/0.925

F810

1146A IH

56.980/2.2433 57.000/2.2441 56.980/2.2433 57.000/2.2441

61.000/2.4016 61.020/2.4024 61.000/2.4016 61.020/2.4024

1.990/0.0783 .020/.0008 .086/.0034 1.990/0.0783 .020/.0008 .086/.0034

23.01/0.906

F810

23.01/0.906

F810

1153A L 1147A U

56.980/2.2433 61.000/2.4016 1.990/0.0783 .020/.0008 57.000/2.2441 61.020/2.4024 .086/.0034 Overflange length remains constant for standard and undersizes.

28.95/1.140

F810

Std. .25 .50 .75 1.0

5M1153

Main 1,2,4,5

Std. .25 .50 .75 1,2,4,5 3 (Fl)

250

1154A IH

HYUNDAI Type and Location

Standard Shaft Size

Max. Bearing Thickness

Housing Bore

Vertical Oil Clearance

Max. Overall Length

ENGINE

VIN CYL

Bore x Stroke

1596cc (1.6) Mits G32B

76.9mm x 86mm

Material Code

Qty. Set

Bearing Shell No.

Engine Set No. Sizes Available

TORQUE SETTINGS

Connecting Rod 23-25 ft.lbs/31-34 Nm Main Bearing 36-40 ft.lbs/49-54 Nm

Rod 44.991/1.7713 45.000/1.7717

48.000/1.8898 48.020/1.8905

1.494/0.0588 .012/.0005 .067/.0026

23.50/0.925

56.980/2.2433 57.000/2.2441 56.980/2.2433 57.000/2.2441 56.980/2.2433 57.000/2.2441

61.000/2.4016 61.020/2.4024 61.000/2.4016 61.020/2.4024 61.000/2.4016 61.020/2.4024

1.990/0.0783 .020/.0008 .086/.0034 1.990/0.0783 .020/.0008 .086/.0034 1.990/0.0783 .020/.0008 .086/.0034

23.01/0.906

Balance Shaft 38.974/1.5344 RHF (Max.)

42.024/1.6545 (Max.)

RHR, LHR

39.025/1.5364 (Max.)

Main 1,2,4,5 1,2,4,5 3 (Fl)

35.977/1.4164 (Max.)

F810

2,3,4,5

33.924/1.3356 33.950/1.3366 33.924/1.3356 33.950/1.3366

38.014/1.4966 38.038/1.4976 38.014/1.4966 38.038/1.4976

1147A U 1144A L 1148A IH

23.01/0.906

F810

28.95/1.140

F810

1.506/0.0593 .020/.0008 .076/.0030

19.25/0.758

F830

SH1465

1.496/0.0589 .043/.0017 .099/.0039

16.00/0.630

F830

SH1466

2.006/0.0790 .041/.0016 .104/.0041 2.006/0.0790 .041/.0016 .104/.0041

20.14/0.793

F23

20.14/0.793

F23

ENGINE

VIN CYL

Bore x Stroke

1795cc (1.8) G4GM 1975cc (2.0) G4GC 1975cc (2.0) G4GF

82mm x 85mm 82mm x 93.5mm 82mm x 93.5mm

L4 L4 L4

4B1146 Std. .25 .50 .75 1.0

5M1144 Std. .25 .50 .75 1.0

3BS8385 Std.

Cam Tower - Includes oil holes for upper position and wide bearings for #1 position. Line bore tunnel to 1.4966"/1.4976" (38.014/38.038mm). 33.924/1.3356 38.014/1.4966 2.006/0.0790 .041/.0016 22.96/0.904 F23 2 1 33.950/1.3366 38.038/1.4976 .104/.0041 2,3,4,5

1146A IH

SC762 U/L

5SC761 Std.

SC761 U SC760 L

TORQUE SETTINGS

Connecting Rod 37-39 ft.lbs/50-53 Nm (Tighten evenly in two or three steps)

Main Bearing 20-24 ft.lbs/27-33 Nm + 60 deg turn

Rod

Main 1,2,4,5 3

44.975/1.7707 44.990/1.7713

48.003/1.8899 48.016/1.8904

1.498/0.0590 .017/.0007 .061/.0024

21.00/0.827

F780

56.977/2.2432 56.992/2.2438

61.000/2.4016 61.020/2.4024

1.994/0.0785 .020/.0008 .071/.0028

21.00/0.827

56.977/2.2432 56.992/2.2438

61.000/2.4016 61.020/2.4024

1.994/0.0785 .020/.0008 .071/.0028

21.00/0.827

F780

1205 IH

2.47/0.097

F817

1204T IH

F780

4B1206

1206 IH

Std. .25 .50 .75 1.0

1204 U/L

Std. .25 .50

5M1204

Thrust 63.000/2.4803 84.500/3.3268 63.250/2.4902 84.750/3.3366 Set includes 2 pieces. Required with 5M1204 main set.

ENGINE

VIN CYL

Bore x Stroke

1997cc (2.0) G4CP 1997cc (2.0) (G4CP)

F F

85mm x 88mm 85mm x 88mm

L4 L4

1T1204 Std.

TORQUE SETTINGS

Connecting Rod 36-38 ft.lbs/49-52 Nm Main Bearing 47-51 ft.lbs/64-70 Nm

Rod

Main 1,2,4,5 3 (Fl)

44.981/1.7709 44.996/1.7715

47.998/1.8897 48.019/1.8905

1.493/0.0588 .016/.0006 .078/.0031

21.10/0.831

56.985/2.2435 57.000/2.2441 56.985/2.2435 57.000/2.2441

61.000/2.4016 61.021/2.4024 61.000/2.4016 61.021/2.4024

1.990/0.0783 .020/.0008 .082/.0032 1.990/0.0783 .020/.0008 .082/.0032

21.00/0.827

251

25.40/1.000

F810

F810 F810

8 2

1185A IH 1186A U/L 1187A IH

4B1185 Std. .25 .50 .75 1.0

5M1186 Std. .25 .50 .75 1.0

HYUNDAI Engine Set No. Sizes Available

Type and Location

Standard Shaft Size

Housing Bore

Max. Bearing Thickness

Vertical Oil Clearance

Max. Overall Length

Material Code

Qty. Set

Bearing Shell No.

(Contâ&#x20AC;&#x2122;d.)

5M1213 .25 .50 .75 1.0

Main - Alt set to 5M1186 with +0.010" overflange length increase for undersizes. * See below for dimensional information. 56.985/2.2435 61.000/2.4016 2.115/0.0833 .020/.0008 21.00/0.827 F810 8 1186A 1,2,4,5 57.000/2.2441 61.021/2.4024 (@ 0.25 mm u/s) .082/.0032 U/L 3 (Fl)

56.985/2.2435 61.000/2.4016 2.115/0.0833 .020/.0008 57.000/2.2441 61.021/2.4024 (@ 0.25 mm u/s) .082/.0032 Stock not available from fee warehouses.

25.65/1.010

F810

1213A IH

3BS8389 Std. .25 .50

Balance Shaft 41.976/1.6526 RHF (Max.)

45.024/1.7726 (Max.)

1.505/0.0593 .025/.0010 .079/.0031

19.00/0.748

F818

8387

LHR

40.967/1.6129 (Max.)

44.025/1.7333 (Max.)

1.495/0.0589 .025/.0010 .079/.0031

21.00/0.827

F818

8388

RHR

40.967/1.6129 (Max.)

44.025/1.7333 (Max.)

1.495/0.0589 .025/.0010 .079/.0031

21.00/0.827

F818

8389

ENGINE

VIN CYL

Bore x Stroke

2351cc (2.4) G4CS

86.5mm x 100mm

TORQUE SETTINGS Connecting Rod 23-25 ft.lbs/31-34 Nm Main Bearing 36-40 ft.lbs/49-54 Nm

Rod

4B1146

44.991/1.7713 45.000/1.7717

48.000/1.8898 48.020/1.8905

1.494/0.0588 .012/.0005 .067/.0026

23.50/0.925

F810

1146A IH

56.980/2.2433 57.000/2.2441

61.000/2.4016 61.020/2.4024

1.990/0.0783 .020/.0008 .086/.0034

23.01/0.906

F810

1153A L

56.980/2.2433 57.000/2.2441 56.980/2.2433 57.000/2.2441

61.000/2.4016 61.020/2.4024 61.000/2.4016 61.020/2.4024

1.990/0.0783 .020/.0008 .086/.0034 1.990/0.0783 .020/.0008 .086/.0034

23.01/0.906

F810

28.95/1.140

F810

1147A U 1154A IH

Balance Shaft 41.976/1.6526 RHF (Max.)

45.024/1.7726 (Max.)

1.505/0.0593 .025/.0010 .079/.0031

19.00/0.748

F818

8387

44.025/1.7333 (Max.) 44.025/1.7333 (Max.)

1.495/0.0589 .025/.0010 .079/.0031 1.495/0.0589 .025/.0010 .079/.0031

21.00/0.827

F818

8388

21.00/0.827

F818

8389

Std. .25 .50 .75 1.0

5M1153

Main 1,2,4,5

Std. .25 .50 .75 1,2,4,5 3 (Fl)

3BS8389 Std. .25 .50

LHR RHR

40.967/1.6129 (Max.) 40.967/1.6129 (Max.)

ENGINE

VIN CYL

2351cc (2.4) G4JS 2351cc (2.4) G4JS

L4 L4

Bore x Stroke 86.5mm x 100mm 86.5mm x 100mm

TORQUE SETTINGS Connecting Rod 13-16 ft.lbs + 90 deg Main Bearing 18 ft.lbs + 90 deg

Rod

4B1185 Std. .25 .50 .75 1.0

5M1219

Main 1-5

Std. .25 .50 .75 1.0

44.981/1.7709 44.996/1.7715

47.998/1.8897 48.019/1.8905

1.493/0.0588 .016/.0006 .078/.0031

21.10/0.831

F810

1185A IH

56.985/2.2435 57.000/2.2441

61.000/2.4016 61.021/2.4024

1.990/0.0783 .020/.0008 .082/.0032

21.00/0.827

F810

1186A U/L

63.100/2.4842 63.350/2.4941 (I.D.)

80.500/3.1693 80.750/3.1791 (O.D.)

2.11/0.083

F250

1219T IH

Thrust

1T1219 Std.

252

HYUNDAI Type and Location

Standard Shaft Size

Max. Bearing Thickness

Housing Bore

Vertical Oil Clearance

Max. Overall Length

ENGINE

VIN CYL

Bore x Stroke

2493cc (2.5) G6BV 2656cc (2.7) G6BA

84mm x 75mm 86.7mm x 75mm

V6 V6

Material Code

Qty. Set

Bearing Shell No.

Engine Set No. Sizes Available

TORQUE SETTINGS

Connecting Rod 11-14 ft.lbs + 90 deg Main Bearing 10-12 ft.lbs M10 (2.7L engines) Main Bearing 10-13 ft.lbs + 90 deg M8 (2.5L engines) Main Bearing 20-24 ft.lbs + 90 deg M10 (2.5L engines) Main Bearing 7-9 ft.lbs M7 (2.7L engines)

Rod

Main 1-4

47.982/1.8891 48.000/1.8898

51.000/2.0079 51.020/2.0087

1.495/0.0589 .018/.0007 .036/.0014

15.00/0.591

61.982/2.4402 62.000/2.4409

66.020/2.5992 (Nominal)

2.013/0.0793 .021/.0008 .087/.0034

17.00/0.669

F810

6B1210A

1210A IH

Std. .25 .50 .75

1215A U/L

Std. .25 .50 .75

4M1215A

Thrust 68.250/2.6870 79.600/3.1339 68.500/2.6968 79.850/3.1437 Note: Set includes four pieces. Required with 4M1215A main set.

1.95/0.077

ENGINE

VIN CYL

Bore x Stroke

2972cc (3.0) G6AT 2972cc (3.0) (G6AT)

T T

91.1mm x 76mm 91.1mm x 76mm

V6 V6

F817

1215T U/L

2T1215 Std.

TORQUE SETTINGS

Connecting Rod 38 ft.lbs/52 Nm Main Bearing 60 ft.lbs/81 Nm

Rod

Main 1-4

49.972/1.9674 50.000/1.9685

53.000/2.0866 53.020/2.0874

1.493/0.0588 .015/.0006 .089/.0035

15.50/0.610

59.980/2.3614 60.000/2.3622

64.000/2.5197 64.020/2.5205

1.988/0.0783 .020/.0008 .086/.0034

18.13/0.714

Thrust 3

66.000/2.5984 77.450/3.0492 66.250/2.6083 77.700/3.0590 Note: Set includes four pieces, use on No. 3 position. Required with 4M1149 main set.

ENGINE

VIN CYL

3500cc (3.5) G6CU

1.98/0.078

Bore x Stroke

F810

F817

6B1140

1140A IH

Std. .25 .50 .75 1.0

1149A U/L

Std. .25 .50 .75 1.0

1149T U/L

4M1149

2T1149 Std.

TORQUE SETTINGS

93mm x 85.6mm

Connecting Rod 26 ft.lbs + 90 deg Main Bearing 65-72 ft.lbs

Rod

Main 1-4

54.981/2.1646 54.999/2.1653

58.001/2.2835 58.019/2.2842

1.495/0.0589 .020/.0008 .051/.0020

15.50/0.610

63.983/2.5190 64.000/2.5197

68.001/2.6772 68.006/2.6774

1.995/0.0785 .011/.0004 .059/.0023

17.12/0.674

F780

6B1180

1180 IH

Std. .25 .50 .75

1183 U/L

Std. .25 .50 .75 1.0

4M1183

Thrust 70.100/2.7598 94.250/3.7106 70.350/2.7697 94.500/3.7205 Note: Set includes four pieces, use on No. 3 position. Required with 4M1183 main set.

1.96/0.077

253

F817

1183T IH

1T1183 Std.

INFINITI INFINITI ENGINE INDEX Engine Disp. 1998cc (2.0)......... 2000cc (2.0)......... 2000cc (2.0)......... 2960cc (3.0)......... 2960cc (3.0).........

Notation

VIN

Cyl.

(SR20DE) (SR20DE) (SR20DE) (VG30DE) (VG30E)

L4 L4 L4 V6 V6

C A H

Year Line Engine Disp.

Notation

91-96 00-02 99-99 93-97 90-92

(VQ30DE) (VQ30DE) (VG33E) (VG33E) (VQ35DE)

1 1 1 3 2

2988cc (3.0)......... 2988cc (3.0)......... 3275cc (3.3)......... 3275cc (3.3)......... 3498cc (3.5).........

VIN

Cyl. V6 V6 V6 V6 V6

C A

Year Line 00-01 96-99 00-00 97-99 01-06

4 4 2 2 5

INFINITI MODEL INDEX Model

CID

FX35 G20 G35 G35 - X I30 I35

Engine Set No. Sizes Available

Liter

3498 1998 2000 3498 3498 2988 3498

3.5 2.0 2.0 3.5 3.5 3.0 3.5

Type and Location

Description

Years 03-05 91-96 99-02 03-06 06 96-01 02-04

Standard Shaft Size

Housing Bore

Model

Max. Bearing Thickness

Vertical Oil Clearance

ENGINE

VIN CYL

Bore x Stroke

1998cc (2.0) (SR20DE) 2000cc (2.0) (SR20DE) 2000cc (2.0) (SR20DE)

86mm x 86mm 86mm x 86mm 86mm x 86mm

L4 L4 L4

CID

J30 M30 M35 M35 - SPORT M35 - X QX4

Liter

2960 2960 3498 3498 3498 3275 3498

3.0 3.0 3.5 3.5 3.5 3.3 3.5

Max. Overall Length

Material Code

Description

Years 93-97 90-92 06 06 06 97-00 01-03

Qty. Set

Bearing Shell No.

TORQUE SETTINGS Connecting Rod 10-12 ft.lbs Step 1 Connecting Rod 28-33 ft.lbs Step 2 Main Bearing 24-28 ft.lbs Step 1 Main Bearing 54-61 ft.lbs Step 2

Rod

4B2960

47.956/1.8880 47.974/1.8887

51.000/2.0079 51.013/2.0084

1.503/0.0592 .020/.0008 .076/.0030

17.10/0.673

F780

2960 IH

54.956/2.1636 54.980/2.1646

58.944/2.3206 58.968/2.3216

1.980/0.0780 .004/.0002 .078/.0031

19.10/0.752

F780

2964 U/L

61.500/2.4213 83.050/3.2697 61.750/2.4311 83.300/3.2795 Note: Set includes two pieces, use on No.3 positoin. Required with 5M2964 main set.

1.95/0.077

F250

2964T IH

Std. .25 .50 .75 1.0

5M2964

Main 1-5

Std. .25 .50 .75

1T2964 Std.

Thrust 3

ENGINE

VIN CYL

Bore x Stroke

2960cc (3.0) (VG30E) 3275cc (3.3) (VG33E) 3275cc (3.3) (VG33E)

87mm x 83mm 91.44mm x 83mm 91.44mm x 83mm

V6 V6 V6

TORQUE SETTINGS Connecting Rod 33-40 ft.lbs/45-54 Nm VG30E engines

Main Bearing 67-74 ft.lbs/91-100 Nm Connecting Rod 10-12 ft.lbs + 60-65 deg VG33E engines

Rod

6B2390

49.961/1.9670 49.974/1.9675

Std. .25 .50 .75 1.0

4M2777 Std. .25 .50 .75 1.0

53.000/2.0866 53.011/2.0870

1.506/0.0593 .014/.0006 .064/.0025

Main 1

62.951/2.4784 66.645/2.6238 1.829/0.0720 62.974/2.4793 66.657/2.6243 2,3 62.951/2.4784 66.645/2.6238 1.829/0.0720 62.974/2.4793 66.657/2.6243 4 (Fl) 62.951/2.4784 66.645/2.6238 1.829/0.0720 62.974/2.4793 66.657/2.6243 Overflange length remains constant for standard and undersizes.

.028/.0011 .099/.0039 .028/.0011 .099/.0039 .028/.0011 .099/.0039

ENGINE

VIN CYL

Bore x Stroke

2960cc (3.0) (VG30DE)

87mm x 83mm

17.09/0.673

F780

2390 IH

22.50/0.886

F780

19.00/0.748

F780

28.85/1.136

F780

2777 U/L 2778 U/L 2779 U/L

TORQUE SETTINGS Connecting Rod 12 ft.lbs + 60-65 deg Main Bearing 67-74 ft.lbs/91-100 Nm

Rod

6B2390 Std. .25 .50 .75 1.0

49.961/1.9670 49.974/1.9675

53.000/2.0866 53.011/2.0870

1.506/0.0593 .014/.0006 .064/.0025

254

17.09/0.673

F780

2390 IH

INFINITI Type and Location

Standard Shaft Size

Max. Bearing Thickness

Housing Bore

Vertical Oil Clearance

Max. Overall Length

Material Code

Qty. Set

Bearing Shell No.

Engine Set No. Sizes Available

(Contâ&#x20AC;&#x2122;d.) Main 2,3

62.951/2.4784 62.974/2.4793

66.645/2.6238 66.672/2.6249

1.830/0.0720 .011/.0004 .077/.0030

19.00/0.748

62.951/2.4784 62.974/2.4793

66.645/2.6238 66.672/2.6249

1.830/0.0720 .011/.0004 .077/.0030

28.85/1.136

F780

2738 U/L

62.951/2.4784 66.645/2.6238 1.830/0.0720 .011/.0004 62.974/2.4793 66.672/2.6249 .077/.0030 Overflange length remains constant for standard and undersizes.

22.50/0.886

F780

2739 U/L

4 (Fl) 1

ENGINE

VIN CYL

2988cc (3.0) (VQ30DE) 2988cc (3.0) (VQ30DE)

V6 V6

Bore x Stroke

F780

2737 U/L

4M2737 Std. .25 .50 .75 1.0

TORQUE SETTINGS

93mm x 73.3mm 93mm x 73.3mm

Connecting Rod 12 ft.lbs + 60-65 deg Main Bearing 67-74 ft.lbs/91-100 Nm

Rod 44.958/1.7700 44.974/1.7706

48.000/1.8898 48.013/1.8903

1.502/0.0591 .034/.0013 .059/.0023

17.00/0.669

Main 1-4

59.951/2.3603 63.993/2.5194 2.140/0.0843 .035/.0014 20.12/0.792 59.975/2.3612 64.017/2.5203 (@ 0.25 u/s) .065/.0026 Note : There is no STD undersize for this set due to numerous STD grades used by the OEM.

F780

6B2630

2630 IH

Std. .25 .50 .75

2633 U/L

.25 .50 .75

4M2633

Thrust 66.500/2.6181 79.250/3.1201 66.700/2.6260 79.500/3.1299 Set includes 4 pieces. Use with 4M2633 main set.

ENGINE

1.94/0.076

VIN CYL

3498cc (3.5) (VQ35DE)

Bore x Stroke

F817

2633T U/L

2T2633 Std.

TORQUE SETTINGS

95.5mm x 81.4mm

Connecting Rod 14-15 ft.lbs + 90-95 deg Main Bearing 24-25 ft.lbs + 90-95 deg

Rod 51.956/2.0455 51.975/2.0463

55.000/2.1654 55.013/2.1659

1.502/0.0591 .022/.0009 .069/.0027

17.00/0.669

Main 1-4

F780

6B2640

2640 IH

Std. .25 .50 .75

2633 U/L

.25 .50 .75

4M2633

Thrust 66.500/2.6181 79.250/3.1201 66.700/2.6260 79.500/3.1299 Set includes 4 pieces. Use with 4M2633 main set.

1.94/0.076

255

F817

2633T U/L

2T2633 Std.

INFINITI PERFORMANCE INFINITI PERFORMANCE ENGINE INDEX Engine Disp. 1998cc (2.0)......... 2960cc (3.0).........

Engine Set No. Sizes Available

Notation

VIN

Cyl.

(SR20DE) (VG30DE)

C A

L4 V6

Type and Location

Standard Shaft Size

Notation (VQ35DE)

Housing Bore

1 2

3498cc (3.5).........

Max. Bearing Thickness

Vertical Oil Clearance

ENGINE

VIN CYL

Bore x Stroke

1998cc (2.0) (SR20DE)

86mm x 86mm

4B2960H Std. .025 .25

4B2960HX Std.

Rod - Race Series. 47.956/1.8880 47.974/1.8887

Main - Race Series. 1-5 54.956/2.1636 Std. .025 .25 .50 54.980/2.1646

5M2964HX Std.

1T2964 Std.

51.000/2.0079 51.013/2.0084

58.944/2.3206 58.968/2.3216

Bore x Stroke

Rod - Race Series. 49.961/1.9670 49.974/1.9675

Qty. Set

Bearing Shell No.

F781

2960H IH

F780

2964H U/L

53.000/2.0866 53.011/2.0870

F250

2964T IH

TORQUE SETTINGS Connecting Rod 12 ft.lbs + 60-65 deg Main Bearing 67-74 ft.lbs/91-100 Nm

1.503/0.0592 .020/.0008 .060/.0024

17.10/0.673

F781

2390H IH

Rod - Race Series. Bearings are .0005" thinner per half to give .001" extra clearance for standard sized crankshafts. 49.961/1.9670 53.000/2.0866 1.490/0.0587 .045/.0018 17.10/0.673 F781 12 2390HX 49.974/1.9675 53.011/2.0870 .086/.0034 IH

Main - Race Series. 62.951/2.4784 2,3 Std. .025 .25 .50 62.974/2.4793

4M2737H

66.645/2.6238 66.672/2.6249

1.830/0.0720 .011/.0004 .077/.0030

4 (Fl)

62.951/2.4784 66.645/2.6238 1.830/0.0720 62.974/2.4793 66.672/2.6249 1 62.951/2.4784 66.645/2.6238 1.830/0.0720 62.674/2.4675 66.672/2.6249 Overflange length remains constant for standard and undersizes.

Std.

19.10/0.752

61.500/2.4213 83.050/3.2697 1.95/0.077 61.750/2.4311 83.300/3.2795 Note: Set includes two pieces, use on No.3 positoin. Required with 5M2964H/HX main set.

87mm x 83mm

4M2737HX

17.10/0.673

Thrust 3

VIN CYL

Std.

Material Code

Year Line 01-06

Main - Race Series. Bearings are .0005" thinner per half to give .001" extra clearance for standard sized crankshafts. 54.956/2.1636 58.944/2.3206 1.963/0.0773 .040/.0016 19.10/0.752 F780 10 2964HX 1-5 54.980/2.1646 58.968/2.3216 .103/.0041 U/L

6B2390HX

Connecting Rod 10-12 ft.lbs Step 1 Connecting Rod 28-33 ft.lbs Step 2 Main Bearing 24-28 ft.lbs Step 1 Main Bearing 54-61 ft.lbs Step 2

1.975/0.0778 .014/.0006 .078/.0031

2960cc (3.0) (VG30DE)

Std. .025 .25 .50

Cyl.

TORQUE SETTINGS

1.503/0.0592 .020/.0008 .067/.0026

ENGINE

6B2390H

Max. Overall Length

VIN

Rod - Race Series. Bearings are .0005" thinner per half to give .001" extra clearance for standard sized crankshafts. 47.956/1.8880 51.000/2.0079 1.503/0.0592 .020/.0008 17.10/0.673 F781 8 2960HX 47.975/1.8888 51.013/2.0084 .067/.0026 IH

5M2964H

Year Line Engine Disp. 91-02 93-97

.011/.0004 .077/.0030 .011/.0004 .077/.0030

19.00/0.748

F780

2737H U/L

28.85/1.136

F780

22.50/0.886

F780

2738H U/L 2739H U/L

Main - Race Series. Bearings are .0005" thinner per half to give .001" extra clearance for standard sized crankshafts. 62.951/2.4784 66.645/2.6238 1.817/0.0715 .036/.0014 19.00/0.748 F780 4 2737HX 2,3 62.974/2.4793 66.672/2.6249 .102/.0040 U/L 62.951/2.4784 66.645/2.6238 1.817/0.0715 62.674/2.4675 66.672/2.6249 62.951/2.4784 66.645/2.6238 1.817/0.0715 62.974/2.4793 66.672/2.6249 Overflange length remains constant for standard and undersizes.

256

.036/.0014 .102/.0040 .036/.0014 .102/.0040

28.85/1.136

2738HX

22.50/0.886

2739HX

INFINITI PERFORMANCE Type and Location

Standard Shaft Size

ENGINE

Max. Bearing Thickness

Housing Bore

VIN CYL

3498cc (3.5) (VQ35DE) Rod - Race Series. 51.956/2.0455 51.975/2.0463

55.000/2.1654 55.013/2.1659

Vertical Oil Clearance

Max. Overall Length

Bore x Stroke

Qty. Set

Bearing Shell No.

Connecting Rod 14-15 ft.lbs + 90-95 deg Main Bearing 24-25 ft.lbs + 90-95 deg

17.00/0.669

F781

2640H IH

Rod - Race Series. Bearings are .0005" thinner per half to give .001" extra clearance for standard sized crankshafts. 51.956/2.0455 55.000/2.1654 1.489/0.0586 .047/.0019 17.00/0.669 F781 12 2640HX 51.975/2.0463 55.013/2.1659 .094/.0037 IH Main - Race Series. 59.951/2.3603 1-4 59.975/2.3612

63.993/2.5194 64.017/2.5203

2.140/0.0843 .035/.0014 .065/.0026

Engine Set No. Sizes Available

TORQUE SETTINGS

95.5mm x 81.4mm

1.502/0.0591 .022/.0009 .069/.0027

Material Code

20.12/0.792

F780

2633H U/L

Main - Race Series. Bearings are .0005" thinner per half to give .001" extra clearance for standard sized crankshafts. 59.951/2.3603 63.993/2.5194 2.140/0.0843 .060/.0024 20.12/0.792 F780 8 2633HX 1-4 59.975/2.3612 64.017/2.5203 .090/.0035 U/L

6B2640H Std. .025 .25

6B2640HX Std.

4M2633H Std. .025 .25

4M2633HX Std.

Thrust 66.500/2.6181 79.250/3.1201 66.700/2.6260 79.500/3.1299 Set includes 4 pieces. Use with 4M2633H/HX main set.

1.94/0.076

257

F817

2633T U/L

2T2633 Std.

INTERNATIONAL INTERNATIONAL ENGINE INDEX Engine Disp. 152 (2.5) ............... 196 (3.2) ............... 198 (3.2) ............... 198 (3.2) ............... 220 (3.6) ............... 232 (3.8) ............... 241 (3.9) ............... 258 (4.2) ............... 265 (4.3) ............... 266 (4.4) ...............

Notation

VIN

4-152, 4-152T, B152 4-196 6-33, IN633,Diesel (6-33T), Turbo,Diesel Jeep Engines Jeep Engines

Cyl. L4 L4 L6 L6 L6 L6 L6 L6 L6 V8

Year Line Engine Disp. 61-71 71-80 76-79 80-80 63-68 69-71 68-70 72-75 69-70 59-70

1 1 2 2 3 4 3 4 3 5

304 (5.0) ............... 345 (5.6) ............... 392 (6.4) ............... 400 ....................... 404 ....................... 421 (6.9) ............... 444 (7.3) ............... 444 (7.3) ...............

Notation

VIN

Jeep engine Diesel Diesel T444E (Powerstroke), Turbo,Diesel

446 .......................

Cyl.

Year Line

V8 V8 V8 V8 V8 V8 V8 V8

60-80 61-85 66-85 74-74 75-82 80-88 88-95 94-99

5 5 5 6 7 8 8 9

75-81

INTERNATIONAL MODEL INDEX Model 100

1000B

1000C

1000D

1010

1100B

1100C

1100D

1110

1200B 1200C 1200D 1210

1300B 1300C 1300D 1310

150

CID 258 304 345 392 232 241 266 304 232 241 266 304 232 241 266 304 232 258 304 392 232 241 266 304 232 241 266 304 232 241 266 304 232 258 304 392 241 266 304 241 266 304 241 266 304 232 258 304 392 241 266 304 241 266 304 241 266 304 232 258 304 392 304

Liter 4.2 5.0 5.6 6.4 3.8 3.9 4.4 5.0 3.8 3.9 4.4 5.0 3.8 3.9 4.4 5.0 3.8 4.2 5.0 6.4 3.8 3.9 4.4 5.0 3.8 3.9 4.4 5.0 3.8 3.9 4.4 5.0 3.8 4.2 5.0 6.4 3.9 4.4 5.0 3.9 4.4 5.0 3.9 4.4 5.0 3.8 4.2 5.0 6.4 3.9 4.4 5.0 3.9 4.4 5.0 3.9 4.4 5.0 3.8 4.2 5.0 6.4 5.0

Description Jeep Engines

Jeep Engines

Jeep Engines Jeep Engines Jeep Engines

Jeep Engines

Jeep Engines Jeep Engines

Years 74 74 74 74 69 68-69 68-69 69 69 69 68-69 69 69-70 69-70 69-70 69-70 71 72-73 72-73 72-73 69 68-69 68-69 69 69 68-69 68-69 69 69-70 69-70 69-70 69-70 71 72-73 72-73 72-73 68-69 68-69 69 68-69 68-69 69 69-70 69-70 69-70 71 72-73 72-73 72-73 68-69 68-69 69 68-69 68-69 69 69-70 69-70 69-70 71 72-73 72-73 72-73 75

Model 150 200

908B 908C DM10 M SERIES VAN M1100

M1200

M1400 M800

M800 NAVY M800 POST OFFICE

MA1200

MHC1310 MS1210

SCOUT

SCOUT II

258

CID 345 392 258 304 345 392 266 304 266 304 258 304 152 220 152 196 220 232 241 258 304 220 232 241 258 266 304 232 241 304 152 220 232 241 304 232 241 304 152 232 241 258 304 220 232 241 266 304 258 304 258 304 345 392 152 265 266 304 196 198 198 232 304

Liter 5.6 6.4 4.2 5.0 5.6 6.4 4.4 5.0 4.4 5.0 4.2 5.0 2.5 3.6 2.5 3.2 3.6 3.8 3.9 4.2 5.0 3.6 3.8 3.9 4.2 4.4 5.0 3.8 3.9 5.0 2.5 3.6 3.8 3.9 5.0 3.8 3.9 5.0 2.5 3.8 3.9 4.2 5.0 3.6 3.8 3.9 4.4 5.0 4.2 5.0 4.2 5.0 5.6 6.4 2.5 4.3 4.4 5.0 3.2 3.2 3.2 3.8 5.0

Description

Jeep Engines

Jeep Engines 4-152, 4-152T, B152 4-152, 4-152T, B152 4-196 Jeep Engines Jeep Engines Jeep Engines Jeep Engines Jeep Engines 4-152, 4-152T, B152 Jeep Engines Jeep Engines 4-152, 4-152T, B152 Jeep Engines Jeep Engines Jeep Engines

Jeep Engines Jeep Engines

4-152, 4-152T, B152

4-196 6-33, IN633 Jeep Engines

Years 75 75 74 74-75 74-75 74-75 68 69 68 69 72 72 61-67 63-67 68-71 71 68 69-70 69-70 72 69-72 68 69-71 68-70 72 68 69-72 69 69 69 68-71 68 69-70 69-70 69-71 69 69 69 71 69-70 69-70 72 69-72 68 69-71 68-70 68 69-71 74 74 72-74 72-74 75 75 61-71 69-70 68 69-70 71-80 80 76-79 71 71-80

INTERNATIONAL INTERNATIONAL MODEL INDEX (Contâ&#x20AC;&#x2122;d.) Model SCOUT II SCOUT II - SS2 SCOUT II - TERRA

Type and Location

CID

345 392 196 304 345 196 198

Standard Shaft Size

Liter

VIN CYL

152 (2.5) 4-152, 4-152T, B152 196 (3.2) 4-196

69.809/2.7484 69.835/2.7494

Years 71-80 75 78-79 78-79 78-79 76-80 76-79

Max. Bearing Thickness

Housing Bore

ENGINE

Main 1,2,4,5

Description

5.6 6.4 3.2 4-196 5.0 5.6 3.2 4-196 3.2 6-33, IN633

L4 L4

74.701/2.9410 74.727/2.9420

Model

CID

SCOUT II - TERRA SCOUT II - TRAVELER

Vertical Oil Clearance

Max. Overall Length

Bore x Stroke

Liter

304 345 196 198 198 304 345

Material Code

Description

5.0 5.6 3.2 4-196 3.2 3.2 6-33, IN633 5.0 5.6

Qty. Set

Bearing Shell No.

Connecting Rod 45-55 ft.lbs/61-75 Nm Main Bearing 75-85 ft.lbs/102-115 Nm

2.421/0.0953 .024/.0009 .102/.0040

18.44/0.726

69.809/2.7484 74.701/2.9410 2.420/0.0953 .024/.0009 69.835/2.7494 74.727/2.9420 .102/.0040 Overflange length remains constant for standard and undersizes.

26.78/1.054

F780

6535 U/L

Cam 1 2 3 4 5

F780

2042 U/L

53.315/2.0990 53.340/2.1000

56.655/2.2305 56.693/2.2320

1.640/0.0647

18.16/0.715

F23

IN-11-1

53.061/2.0890 53.086/2.0900 52.806/2.0790 52.832/2.0800 52.552/2.0690 52.578/2.0700 52.300/2.0590 52.324/2.0600

56.400/2.2205 56.440/2.2220 56.147/2.2105 56.185/2.2120 55.893/2.2005 55.931/2.2020 55.639/2.1905 55.677/2.1920

1.640/0.0647

16.50/0.650

F23

IN-11-2

1.640/0.0647

16.50/0.650

F23

IN-11-3

1.640/0.0647

16.50/0.650

F23

IN-11-4

1.640/0.0647

19.18/0.755

F23

IN-11-5

ENGINE

5M516P Std. 10 20 30

5C426S Std.

VIN CYL

198 (3.2) 6-33, IN633 Diesel 198 (3.2) (6-33T) Turbo Diesel

Engine Set No. Sizes Available

TORQUE SETTINGS

3.875 x 3.219 4.125 x 3.656

3 (Fl)

Years 76-80 76-80 76-80 80 76-79 76-80 76-80

L6 L6

Bore x Stroke

TORQUE SETTINGS

83mm x 100mm 83mm x 100mm

Connecting Rod 37 ft.lbs Main Bearing 123-137 ft.lbs

Rod

Main 1,2,3,4

52.913/2.0832 52.926/2.0837

55.987/2.2042 56.000/2.2047

1.506/0.0593 .049/.0019 .101/.0040

26.04/1.025

70.907/2.7916 70.920/2.7921

74.981/2.9520 75.000/2.9528

2.015/0.0793 .031/.0012 .089/.0035

31.87/1.255

Thrust 4

78.610/3.0949 93.472/3.6800 78.870/3.1051 93.726/3.6900 Set includes 4 pieces, use on No.4 position. Required with 4M1367 main set.

2.36/0.093

Cam - for engines before 4/79 only. 1 45.434/1.7887 48.641/1.9150 45.447/1.7892 48.666/1.9160 2,3 43.897/1.7282 47.117/1.8550 43.910/1.7287 47.142/1.8560 4 41.218/1.6628 44.425/1.7490 41.231/1.6233 44.450/1.7500

1.588/0.6250 .018/.0007 .110/.0043 1.588/0.0625 .012/.0005 .031/.0012 1.588/0.6250 .018/.0007 .110/.0043

Cam - for engines after 5/79 only. 51.390/2.0232 54.410/2.1421 1 51.400/2.0236 54.430/2.1429 2 3 4

F780

F250

Std. .25 .50 .75 1.0

1367 U/L

Std. .25 .50 .75 1.0

4M1367

1367T U/L

2T1367

4C4036

24.13/0.950

F23

4036

22.10/0.870

F23

4037

24.13/0.950

F23

4038

1.495/0.0589 .020/.0008 .090/.0035

24.25/0.955

F820

4042

Std.

4C4042 Std.

51.190/2.0154 51.200/2.0157 50.990/2.0075 51.000/2.0079

54.210/2.1342 54.230/2.1350 54.010/2.1264 54.030/2.1272

1.495/0.0589 .020/.0008 .090/.0035 1.495/0.0589 .020/.0008 .090/.0035

22.25/0.876

F820

4043

22.25/0.876

F820

4044

50.790/1.9996 50.800/2.0000

53.810/2.1185 53.830/2.1193

1.495/0.0589 .020/.0008 .090/.0035

24.25/0.955

F820

4045

259

6B1366

1366 IH

INTERNATIONAL Engine Set No. Sizes Available

Standard Shaft Size

Housing Bore

Max. Bearing Thickness

Vertical Oil Clearance

Max. Overall Length

Material Code

Qty. Set

Bearing Shell No.

30.10/1.185

F100

RB4096

(Contâ&#x20AC;&#x2122;d.) RB4096 Semi

Type and Location

Small End 26.000/1.0236 (Nominal)

ENGINE

VIN CYL

220 (3.6) 241 (3.9) 265 (4.3)

6B2001 Std. 10 20 30 40

4M2002 Std. 10 20 30

29.000/1.1417 29.025/1.1427

L6 L6 L6

Bore x Stroke 3.563 x 3.688 3.526 x 4.018 3.687 x 4.125

TORQUE SETTINGS Connecting Rod 45-55 ft.lbs Main Bearing 75-85 ft.lbs

Rod - Non stock item. Orders Ex-Factory only. 60.274/2.3730 63.487/2.4995 1.582/0.0623 .023/.0009 60.300/2.3740 63.500/2.5000 .088/.0035

27.94/1.100

F780

2001 IH

Main - Non stock item. Orders Ex-Factory only. 69.799/2.7480 74.701/2.9410 2.423/0.0954 .030/.0012 1 69.825/2.7490 74.727/2.9420 .108/.0043

33.09/1.303

F780

2002 U/L

30.38/1.196

F780

41.15/1.620

F780

48.21/1.898

F780

2003 U/L 2004 U/L 2005 U/L

3 (Fl) 4

69.799/2.7480 69.825/2.7490 69.799/2.7480 69.825/2.7490 69.799/2.7480 69.825/2.7490

74.701/2.9410 74.727/2.9420 74.701/2.9410 74.727/2.9420 74.701/2.9410 74.727/2.9420

2.423/0.0954 .030/.0012 .108/.0043 2.423/0.0954 .030/.0012 .108/.0043 2.423/0.0954 .030/.0012 .108/.0043

* DIMENSIONAL INFORMATION FOR 4M2002 Overall Width (Nominal) Increase in Width .010" u/s shaft 1.624" +0.004" .020" u/s shaft 1.624" +0.004" .030" u/s shaft 1.628" +0.008"

4C220S Discontinued

Cam - Non stock item. Orders Ex-Factory only. 53.568/2.1090 56.896/2.2400 1.643/0.0647 .026/.0010 1 53.594/2.1100 56.934/2.2415 .101/.0040

28.70/1.130

F23

IN-3A-1

27.10/1.067

F23

IN-8-2

27.10/1.067

F23

IN-8-3

33.45/1.317

F23

IN-8-4

3 4

53.061/2.0890 53.086/2.0900 52.553/2.0690 52.578/2.0700 38.087/1.4995 38.113/1.5005

ENGINE

56.388/2.2200 56.426/2.2215 55.880/2.2000 55.918/2.2015 41.415/1.6305 41.453/1.6320

VIN CYL

232 (3.8) Jeep Engines 258 (4.2) Jeep Engines

L6 L6

1.643/0.0647 .026/.0010 .101/.0040 1.643/0.0647 .026/.0010 .101/.0040 1.643/0.0647 .026/.0010 .101/.0040

Bore x Stroke 3.75 x 3.50 3.75 x 3.90

TORQUE SETTINGS Connecting Rod 27-30 ft.lbs/36-41 Nm (1969-74 engines)

Connecting Rod 30-35 ft.lbs/41-48 Nm (1975 on engines)

Main Bearing 75-85 ft.lbs/102-115 Nm Rod

6B960P

53.208/2.0948 53.226/2.0955

Std. 01 10 20 30 40

56.083/2.2080 56.096/2.2085

1.425/0.0561 .017/.0006 .074/.0029

Main 1,2,4,5, Std. 10 20 30 40 6,7 3 (Fl)

7M704P

63.470/2.4988 68.351/2.6910 2.421/0.0953 63.487/2.4995 68.377/2.6920 63.470/2.4988 68.351/2.6910 2.421/0.0953 63.487/2.4995 68.377/2.6920 Overflange length remains constant for standard and undersizes.

260

.022/.0008 .091/.0036 .022/.0008 .091/.0036

21.26/0.837

F780

1480 IH

25.04/0.986

F780

32.26/1.270

F780

8872 U/L 8873 U/L

INTERNATIONAL Type and Location

Standard Shaft Size

Max. Bearing Thickness

Housing Bore

Vertical Oil Clearance

Max. Overall Length

Material Code

Qty. Set

Bearing Shell No.

Engine Set No. Sizes Available

(Contâ&#x20AC;&#x2122;d.) Main - Alt set to 7M704P with +0.010" overflange length increase. * See below for dimensional information. F780 12 8872 1,2,4,5,6, 63.470/2.4988 68.351/2.6910 2.421/0.0953 .022/.0008 25.04/0.986 63.487/2.4995 68.377/2.6920 .091/.0036 U/L 7 3 (Fl)

63.470/2.4988 68.351/2.6910 63.487/2.4995 68.377/2.6920 Stock not available from fee warehouses.

.010" u/s shaft .020" u/s shaft .030" u/s shaft .040" u/s shaft Cam 1 2 3 4

2.421/0.0953 .022/.0008 .091/.0036

32.26/1.280

F780

* DIMENSIONAL INFORMATION FOR 7M8879P Overall Width (Nominal) Increase in Width 1.280" +0.010" 1.280" +0.010" 1.280" +0.010" 1.280" +0.010"

54.750/2.1555 54.775/2.1565

1.580/0.0620

17.65/0.695

F23

N-7-1

51.295/2.0195 51.321/2.0205 51.041/2.0095 51.067/2.0105 50.787/1.9995 50.813/2.0005

54.496/2.1455 54.521/2.1465 54.242/2.1355 54.267/2.1365 53.988/2.1255 54.013/2.1265

1.580/0.0620

17.65/0.695

F23

N-7-2

1.580/0.0620

17.65/0.695

F23

N-7-3

1.580/0.0620

17.65/0.695

F23

N-7-4

4C549S Std.

VIN CYL

266 (4.4) 304 (5.0) 345 (5.6) 392 (6.4)

7M8879P 10 20 30 40

8879 U/L

51.549/2.0295 51.575/2.0305

ENGINE

V8 V8 V8 V8

Bore x Stroke

TORQUE SETTINGS

Connecting Rod 45-55 ft.lbs/61-75 Nm Main Bearing 75-85 ft.lbs/102-115 Nm

3.63 x 3.22 3.88 x 3.22 3.88 x 3.66 4.13 x 3.66

Rod 60.274/2.3730 60.300/2.3740

63.487/2.4995 63.500/2.5000

1.580/0.0622 .027/.0011 .092/.0036

24.84/0.978

69.809/2.7484 69.835/2.7494

74.701/2.9410 74.727/2.9420

2.421/0.0953 .024/.0009 .102/.0040

18.44/0.726

69.809/2.7484 74.701/2.9410 2.420/0.0953 .024/.0009 69.835/2.7494 74.727/2.9420 .102/.0040 Overflange length remains constant for standard and undersizes.

26.78/1.054

F780

6535 U/L

Main 1,2,4,5 3 (Fl)

Cam 1 2 3 4 5

F780

Std. 10 20 30

2042 U/L

Std. 10 20 30

53.315/2.0990 53.340/2.1000

56.655/2.2305 56.693/2.2320

1.640/0.0647

18.16/0.715

F23

IN-11-1

53.061/2.0890 53.086/2.0900 52.806/2.0790 52.832/2.0800 52.552/2.0690 52.578/2.0700 52.300/2.0590 52.324/2.0600

56.400/2.2205 56.440/2.2220 56.147/2.2105 56.185/2.2120 55.893/2.2005 55.931/2.2020 55.639/2.1905 55.677/2.1920

1.640/0.0647

16.50/0.650

F23

IN-11-2

1.640/0.0647

16.50/0.650

F23

IN-11-3

1.640/0.0647

16.50/0.650

F23

IN-11-4

1.640/0.0647

19.18/0.755

F23

IN-11-5

ENGINE

5M516P

5C426S Std.

VIN CYL

400 Jeep engine

8B581P

2041 IH

Bore x Stroke 4.165 x 3.680

TORQUE SETTINGS

Connecting Rod 35-40 ft.lbs/48-54 Nm Main Bearing 95-100 ft.lbs/129-136 Nm

Rod 57.094/2.2478 57.112/2.2485

60.312/2.3745 60.325/2.3750

1.582/0.0623 .048/.0019 .104/.0041

261

20.45/0.805

F780

CB819P IH

8B819P Std. 10 20

INTERNATIONAL Engine Set No. Sizes Available

Type and Location

Max. Overall Length

Material Code

Qty. Set

Bearing Shell No.

2.433/0.0958 .013/.0005 .084/.0033

23.57/0.928

F780

1482 U

2.433/0.0958 .013/.0005 .084/.0033

23.57/0.928

F780

1484 L

69.804/2.7482 74.701/2.9410 2.433/0.0958 .013/.0005 69.822/2.7489 74.727/2.9420 .084/.0033 Overflange length remains constant for standard and undersizes.

32.26/1.270

F780

1483 U/L

Standard Shaft Size

Housing Bore

69.804/2.7482 69.822/2.7489

74.701/2.9410 74.727/2.9420

69.804/2.7482 69.822/2.7489

74.701/2.9410 74.727/2.9420

Max. Bearing Thickness

Vertical Oil Clearance

(Contâ&#x20AC;&#x2122;d.) 5M1041P

Main 1,2,4,5

Std. 10 20 30 40 1,2,4,5 3 (Fl)

5M1485P 10 20 30 40

Main - Alt set to 5M1041P, with +0.010" overwidth flange increase for undersizes.* See below for dimensional information. 1,2,4,5 69.804/2.7482 74.701/2.9410 2.433/0.0958 .013/.0005 23.57/0.928 F780 4 1482 69.822/2.7489 74.727/2.9420 .084/.0033 U 1,2,4,5 69.804/2.7482 74.701/2.9410 2.433/0.0958 .013/.0005 23.57/0.928 F780 4 1484 69.822/2.7489 74.727/2.9420 .084/.0033 L 3 (Fl)

69.804/2.7482 74.701/2.9410 69.822/2.7489 74.727/2.9420 Stock not available from fee warehouses.

.010" u/s shaft .020" u/s shaft .030" u/s shaft .040" u/s shaft

5C671S

Cam 1

Std. 2 3 4 5

2.433/0.0958 .013/.0005 .084/.0033

32.51/1.280

F780

1485 U/L

* DIMENSIONAL INFORMATION FOR 5M1485P Overall Width (Nominal) Increase in Width 1.280" +0.010" 1.280" +0.010" 1.280" +0.010" 1.280" +0.010"

53.835/2.1195 53.861/2.1205

57.036/2.2455 57.061/2.2465

1.580/0.0620

23.50/0.925

F23

N-9-1

53.073/2.0895 53.099/2.0905 52.311/2.0595 52.337/2.0605 51.549/2.0295 51.575/2.0305 50.787/1.9995 50.813/2.0005

56.274/2.2155 56.299/2.2165 55.512/2.1855 55.537/2.1865 54.750/2.1555 54.775/2.1565 53.988/2.1255 54.013/2.1265

1.580/0.0620

16.00/0.630

F23

N-8-2

1.580/0.0620

16.00/0.630

F23

N-8-3

1.580/0.0620

16.00/0.630

F23

N-8-4

1.580/0.0620

16.00/0.630

F23

N-8-5

ENGINE

VIN CYL

404 446

V8 V8

Bore x Stroke 4.13 x 3.74 4.13 x 4.18

TORQUE SETTINGS Connecting Rod 38-44 ft.lbs/51-60 Nm Main Bearing 90-100 ft.lbs/122-136 Nm

Rod

8B1230P

63.450/2.4980 63.475/2.4990

66.662/2.6245 66.675/2.6250

1.580/0.0622 .041/.0016 .104/.0041

24.84/0.978

F780

CB1230P IH

79.319/3.1228 79.340/3.1236

84.206/3.3152 84.227/3.3160

2.420/0.0953 .079/.0031 .119/.0047

20.45/0.805

F780

MB2763P U/L

79.339/3.1228 84.206/3.3152 2.420/0.0953 .079/.0031 79.340/3.1236 84.226/3.3160 .119/.0047 Overflange length remains constant for standard and undersizes.

28.70/1.130

F780

MB2764P U/L

Std. 10 20 30

5M1460P

Main 1,2,4,5

Std. 10 20 30 3 (Fl)

5C1092S

Cam 1

Std. 2,3,4,5

53.315/2.0990 53.340/2.1000

56.655/2.2305 56.693/2.2320

1.640/0.0647

20.07/0.790

F23

IN-17-1

53.315/2.0990 53.340/2.1000

56.655/2.2305 56.693/2.2320

1.640/0.0647

16.64/0.655

F23

IN-17-2

262

INTERNATIONAL Type and Location

Standard Shaft Size

Max. Bearing Thickness

Housing Bore

ENGINE

VIN CYL

421 (6.9) Diesel 444 (7.3) Diesel

V8 V8

Vertical Oil Clearance

Bore x Stroke 4.00 x 4.18 4.11 x 4.18

Max. Overall Length

Material Code

Qty. Set

Bearing Shell No.

Engine Set No. Sizes Available

TORQUE SETTINGS

Connecting Rod 48-54 ft.lbs Main Bearing 95 ft.lbs

Rod 63.449/2.4980 63.474/2.4990

68.339/2.6905 68.364/2.6915

2.420/0.0952 .053/.0021 .104/.0041

22.56/0.888

79.319/3.1228 79.339/3.1236

84.206/3.3152 84.231/3.3162

2.410/0.0949 .053/.0021 .124/.0049

22.23/0.875

79.319/3.1228 84.206/3.3152 2.410/0.0949 .053/.0021 79.339/3.1236 84.231/3.3162 .124/.0049 Overflange length remains constant for standard and undersizes.

28.70/1.130

F780

2935 U/L

1.640/0.0647

20.07/0.790

F23

IN-17-1

1.640/0.0647

16.64/0.655

F23

IN-17-2

Main 1,2,4,5 3 (Fl)

Cam 1 2,3,4,5

53.315/2.0990 53.340/2.1000 53.315/2.0990 53.340/2.1000

56.655/2.2305 56.693/2.2320 56.655/2.2305 56.693/2.2320

ENGINE

F780

8B1327P

5241 IH

Std. 01 10 20 30

2934 U/L

Std. 10 20 30

5M1596P

5C1092S Std.

VIN CYL

444 (7.3) T444E (Powerstroke) Turbo Diesel

F780

Bore x Stroke

TORQUE SETTINGS

Connecting Rod 52 ft.lbs Step 1 Connecting Rod 80 ft.lbs Step 2 Main Bearing 75 ft.lbs Step 1 Main Bearing 95 ft.lbs Step 2

4.11 x 4.18

Rod

Main 1,2,4,5 3 (Fl) Cam 1 2,3,4,5

63.449/2.4980 63.475/2.4990

68.339/2.6905 68.364/2.6915

2.419/0.0952 .038/.0015 .114/.0045

22.56/0.888

F780

79.319/3.1228 79.339/3.1236 79.319/3.1228 79.339/3.1236

84.206/3.3152 84.231/3.3162 84.206/3.3152 84.231/3.3162

2.410/0.0949 .046/.0018 .117/.0046 2.410/0.0949 .046/.0018 .117/.0046

23.70/0.933 31.45/1.238

F780

53.315/2.0990 53.340/2.1000

56.655/2.2305 56.693/2.2320

1.640/0.0647

20.07/0.790

F23

IN-17-1

53.315/2.0990 53.340/2.1000

56.655/2.2305 56.693/2.2320

1.640/0.0647

16.64/0.655

F23

IN-17-2

F780

5246 IH 5247 U/L 5248 U/L

8B1633P Std. 10 20 30 40

5M2034P Std. 10 20 30 40

5C1092S Std.

263

INTERNATIONAL TRACTOR INTERNATIONAL TRACTOR ENGINE INDEX Engine Disp.

Notation

144 (2.4) ............... 144 (2.4) ............... 154 (2.5) ............... 154 (2.5) ............... 155 (2.5) ............... 155 (2.5) ............... 179 (2.9) ...............

Engine Set No. Sizes Available

BD144,Diesel BC144 BD154,Diesel Gas D155,Diesel Gas D179,Diesel Type and Location

Standard Shaft Size

ENGINE

VIN

Cyl.

Year Line Engine Disp.

L4 L4 L4 L4 L3 L3 L3

Housing Bore

VIN CYL

144 (2.4) BD144 Diesel 144 (2.4) BC144 154 (2.5) BD154 Diesel 154 (2.5) Gas

L4 L4 L4 L4

1 1 1 1 2 2 2

Notation

206 (3.4) ............... 239 (3.9) ............... 239 (3.9) ............... 310 (5.1) ............... 358 (5.9) ............... 358 (5.9) ...............

Max. Bearing Thickness

Vertical Oil Clearance

Bore x Stroke 3.375 x 4.000 3.375 x 4.000 3.500 x 4.000 3.500 x 4.000

VIN

D206,Diesel D239,Diesel DT239, Turbo,Diesel D310,Diesel D358,Diesel DT358, Turbo,Diesel

Max. Overall Length

Material Code

Cyl.

Year Line

L4 L4 L4 L6 L6 L6

3 3 3 4 4 4

Qty. Set

Bearing Shell No.

TORQUE SETTINGS Connecting Rod 30-35 ft.lbs Main Bearing 70-75 ft.lbs

Rod - Non-stock item. Order Ex-Factory only. 44.425/1.7490 47.638/1.8755 1.577/0.0621 .034/.0013 44.450/1.7500 47.650/1.8760 .097/.0038

26.51/1.044

F780

2031 IH

Main - Non-stock item. Order Ex-Factory only. 1,2,3,4 53.975/2.1250 58.331/2.2965 2.153/0.0848 .025/.0010 Std. 10 20 30 40 54.000/2.1260 58.357/2.2975 .102/.0040

27.23/1.072

F780

2032 U/L

33.28/1.310

F780

2033 IH

4B2031 Std. 10 20 30 40

5M2033

5 (Fl)

53.975/2.1250 58.331/2.2965 2.153/0.0848 .025/.0010 54.000/2.1260 58.357/2.2975 .102/.0040 Overflange length increases with undersizes. *See below for dimensional information.

.010" u/s shaft .020" u/s shaft .030" u/s shaft .040" u/s shaft

3C6546 Std.

Cam - Non-stock item. Order Ex-Factory only. 45.999/1.8110 49.326/1.9420 1.646/0.0648 .009/.0004 1 46.025/1.8120 49.377/1.9440 .116/.0046

28.04/1.104

F23

6546

25.05/0.986

F23

6547

20.09/0.791

F23

6548

40.056/1.5770 40.081/1.5780 38.075/1.4990 38.100/1.5000

ENGINE

Std. .25 .50 .75

43.370/1.7075 43.408/1.7090 41.389/1.6295 41.427/1.6310

VIN CYL

155 (2.5) D155 Diesel 155 (2.5) Gas 179 (2.9) D179 Diesel

3B2006

* DIMENSIONAL INFORMATION FOR 5M2033 Overall Width (Nominal) Increase in Width 1.314" +0.004" 1.314" +0.004" 1.318" +0.008" 1.318" +0.008"

L3 L3 L3

1.626/0.0640 .037/.0015 .110/.0043 1.626/0.0640 .037/.0015 .110/.0043

Bore x Stroke 3.875 x 4.374 3.875 x 4.374 3.875 x 5.063

TORQUE SETTINGS Connecting Rod 18.5 ft.lbs + 120 deg.

Rod - Non-stock item. Order Ex-Factory only. 63.971/2.5185 68.000/2.6772 1.971/0.0776 .068/.0027 63.990/2.5193 68.019/2.6779 .122/.0048 Locating lug on right side.

Main - Non-stock item. Order Ex-Factory only. 1,2,3 79.972/3.1485 85.999/3.3858 2.972/0.1170 .065/.0026 79.990/3.1492 86.022/3.3867 .132/.0052 Std. .25 .50 .75 1.0 4 (Fl) 79.971/3.1485 86.000/3.3858 2.972/0.1170 .066/.0026 79.990/3.1492 86.022/3.3867 .133/.0052 Overflange length increases with undersizes. *See below for dimensional information.

4M2007

32.18/1.267

F820

2006 IH

25.80/1.016

F780

36.51/1.437

F780

2007 U/L 2008 U/L

* DIMENSIONAL INFORMATION FOR 4M2007 Overall Width (Nominal) Increase in Width 0.25 mm u/s shaft 1.447" +0.010" 0.50 mm u/s shaft 1.457" +0.020" 0.75 mm u/s shaft 1.467" +0.030" 1.00 mm u/s shaft 1.477" +0.040"

264

INTERNATIONAL TRACTOR Type and Location

Standard Shaft Size

Housing Bore

Max. Bearing Thickness

Vertical Oil Clearance

Max. Overall Length

Material Code

Qty. Set

Bearing Shell No.

Engine Set No. Sizes Available

(Contâ&#x20AC;&#x2122;d.) Small End - Non-stock item. Order Ex-Factory only. 35.996/1.4172 39.700/1.5630 36.000/1.4173 39.570/1.5579

ENGINE

VIN CYL

206 (3.4) D206 Diesel 239 (3.9) D239 Diesel 239 (3.9) DT239 Turbo Diesel

L4 L4 L4

34.00/1.339

F100

RB4067

RB4067 Semi

Bore x Stroke

TORQUE SETTINGS

3.875 x 4.374 3.875 x 5.059 3.875 x 5.059

Rod - Non-stock item. Order Ex-Factory only. 63.971/2.5185 68.000/2.6772 1.971/0.0776 .068/.0027 63.990/2.5193 68.019/2.6779 .112/.0044 Locating lug on right side. Main - Non-stock item. Order Ex-Factory only. 1,2,3,4 79.972/3.1485 85.999/3.3858 2.972/0.1170 .065/.0026 79.990/3.1492 86.022/3.3867 .132/.0052 5 (Fl) 79.971/3.1485 86.000/3.3858 2.972/0.1170 .065/.0026 67.990/2.6768 86.022/3.3867 .132/.0052 Overflange length increases with undersizes. *See below for dimensional information.

32.18/1.267

25.80/1.016 36.51/1.437

F820

F780 F780

8 2

2006 IH

2007 U/L 2008 U/L

4B2006 Std. .25 .50 .75 1.0

5M2007 Std. .25 .50 .75 1.0

* DIMENSIONAL INFORMATION FOR 5M2007 Overall Width (Nominal) Increase in Width 0.25 mm u/s shaft 1.447" +0.010" 0.50 mm u/s shaft 1.457" +0.020" 0.75 mm u/s shaft 1.467" +0.030" 1.00 mm u/s shaft 1.477" +0.040" Small End - Non-stock item. Order Ex-Factory only. 35.996/1.4172 39.700/1.5630 36.000/1.4173 39.570/1.5579

ENGINE

VIN CYL

310 (5.1) D310 Diesel 358 (5.9) D358 Diesel 358 (5.9) DT358 Turbo Diesel

L6 L6 L6

34.00/1.339

F100

RB4067

RB4067 Semi

Bore x Stroke

TORQUE SETTINGS

3.875 x 4.374 3.875 x 5.059 3.875 x 5.059

Rod - Non-stock item. Order Ex-Factory only. 63.971/2.5185 68.000/2.6772 1.971/0.0776 .068/.0027 63.990/2.5193 68.019/2.6779 .122/.0048 Locating lug on right side. Main - Non-stock item. Order Ex-Factory only. 1-6 79.972/3.1485 85.999/3.3858 2.972/0.1170 .065/.0026 79.990/3.1492 86.022/3.3867 .132/.0052 7 (Fl) 79.971/3.1485 86.000/3.3858 2.972/0.1170 .066/.0026 79.990/3.1492 86.022/3.3867 .133/.0052 Overflange length increases with undersizes. *See below for dimensional information.

32.18/1.267

25.80/1.016 36.51/1.437

F820

F780 F780

12 2

2006 IH

2007 U/L 2008 U/L

6B2006 Std. .25 .50 .75 1.0

7M2007 Std. .25 .50 .75 1.0

* DIMENSIONAL INFORMATION FOR 7M2007 Overall Width (Nominal) Increase in Width 0.25 mm u/s shaft 1.447" +0.010" 0.50 mm u/s shaft 1.457" +0.020" 0.75 mm u/s shaft 1.467" +0.030" 1.00 mm u/s shaft 1.477" +0.040" Small End - Non-stock item. Order Ex-Factory only. 35.996/1.4172 39.700/1.5630 36.000/1.4173 39.570/1.5579

34.00/1.339

F100

RB4067

RB4067 Semi

265

ISUZU ISUZU ENGINE INDEX Engine Disp. 1325cc (1.3)......... 1471cc (1.5)......... 1471cc (1.5)......... 1471cc (1.5)......... 1487cc (1.5)......... 1584cc (1.6)......... 1584cc (1.6)......... 1588cc (1.6)......... 1588cc (1.6)......... 1588cc (1.6)......... 1817cc (1.8)......... 1817cc (1.8)......... 1817cc (1.8)......... 1817cc (1.8)......... 1817cc (1.8)......... 1949cc (1.9)......... 1951cc (2.0)......... 1994cc (2.0)......... 1995cc (2.0)......... 2156cc (2.2)......... 2180cc (2.2)......... 2180cc (2.2)......... 2180cc (2.2)......... 2180cc (2.2)......... 2189cc (2.2)......... 2207cc (2.2)......... 2234cc (2.3)......... 2238cc (2.2)......... 2238cc (2.2)......... 2254cc (2.3)......... 2254cc (2.3)......... 2369cc (2.4)......... 2499cc (2.5).........

Notation

VIN

G130 4XC1 4XC1-T, Turbo 4XC1 4FA1,Diesel 4ZA1 G161/W/Z 4XE1WT/RLK, Turbo 4XE1W/RLK 4XE1V/RLR 4FB1,Diesel 4ZB1 G180Z G180Z 4FB1,Diesel G200Z C190,Diesel 4ZC1-T, Turbo 4FC1,Diesel Honda F22B6 OHV (Chev. Eng.) OHV (Chev. Eng.) (X22SE) (X22SE) 4FD1,Diesel C221,Diesel (F23A7) C223,Diesel C223, Turbo,Diesel F23A7 4ZD1 C240,Diesel 4JA1,Diesel

7 9 K

4 5 6 B N P A F 4 4 5 D

S U L

Cyl. L4 L4 L4 L4 L4 L4 L4 L4 L4 L4 L4 L4 L4 L4 L4 L4 L4 L4 L4 L4 L4 L4 L4 L4 L4 L4 L4 L4 L4 L4 L4 L4 L4

Year Line Engine Disp. 66-72 86-89 87-89 85-85 81-88 81-88 69-79 91-92 89-91 91-93 77-89 81-89 81-85 81-82 81-84 83-87 72-88 85-89 81-89 96-97 96-00 00-00 98-00 01-03 84-88 68-79 99-99 81-87 86-87 98-98 86-95 69-88 85-90

1 2 2 2 3 4 1 2 2 2 3 4 5 5 3 6 7 4 3 8 9 9 10 10 3 11 13 12 12 13 4 11 14

2559cc (2.6)......... 169 2770cc (2.8)... 2771cc (2.8)......... 2771cc (2.8)......... 2775cc (2.8)......... 2827cc (2.8)......... 3137cc (3.1)......... 3165cc (3.2)......... 3165cc (3.2)......... 3165cc (3.2)......... 3165cc (3.2)......... 3268cc (3.3)......... 3268cc (3.3)......... 211 3460cc (3.5)... 3475cc (3.5)......... 3475cc (3.5)......... 3491cc (3.5)......... 3595cc (3.6)......... 3856cc (3.9)......... 3856cc (3.9)......... 256 (4.2) ............... 4294cc (4.3)......... 4334cc (4.3)......... 4570cc (4.6)......... 4985cc (5.0)......... 323 (5.3) ............... 323 (5.3) ............... 325 (5.3) ............... 5393cc (5.4)......... 5785cc (5.8)......... 5785cc (5.8)......... 6130cc (6.2)......... 6494cc (6.5).........

Notation

VIN

Cyl.

4ZE1

E 8

L4 L4 L4 L4 L4 V6 V6 V6 V6 V6 V6 L4 L4 L5 V6 V6 V6 L4 L4 L4 L6 V6 L4 L4 L4 V8 V8 V8 L6 L6 L6 L6 L6

4JB1,Diesel 4JB1-T, Turbo,Diesel 4BA1,Diesel LL2 (Chevrolet Eng.) LG6 (Chevrolet Eng.) 6VD1 SOHC 6VD1 DOHC DOHC (6VD1) DOHC (6VD1) 4BC1,Diesel 4BC2,Diesel

R Z V W W 6

(6VE1) (6VE1) (6VE1) 4BB1,Diesel 4BD1,Diesel 4BD1-T, Turbo,Diesel OHV (Chevrolet Eng) 4HF1,Diesel 4HG1,Diesel 4HJ1,Diesel

X X

S X

M P M 6BB1,Diesel 6BD1,Diesel 6BD1-T, Turbo,Diesel 6BF1,Diesel 6BG1,Diesel

Year Line 88-97 06-06 85-90 85-90 73-88 89-91 91-94 92-97 92-98 98-00 01-04 79-84 80-88 06-06 98-00 01-02 03-04 73-88 82-90 82-94 03-06 97-00

05-05 03-04 06-06 72-90 77-90 79-88 80-88 84-88

15 16 14 14 17 18 18 19 19 19 19 20 20 21 19 19 19 17 22 22 23 24 25 25 25 26 26 26 27 27 27 27 27

ISUZU MODEL INDEX Model

CID

AMIGO

ASCENDER ASCENDER - LIMITED ASCENDER - LS ASCENDER - S

HOMBRE

I-MARK - DLX IMPULSE

IMPULSE - RS IMPULSE - XS OASIS

Liter

3475 3491 2180 4294

2.2 2.3 2.6 3.2 3.2 4.2 5.3 5.3 4.2 5.3 5.3 4.2 5.3 3.5 3.5 2.2 4.3

2770 3460 1471 1471 1588 1817 1817 1817 1817 1588 1949 1994 2254 1588 1588 2234 2254

2.8 3.5 1.5 1.5 1.6 1.8 1.8 1.8 1.8 1.6 1.9 2.0 2.3 1.6 1.6 2.3 2.3

256 323 323 256 323 325 256 323

AXIOM

I-280 I-350 I-MARK

cc 2180 2254 2559 3165 3165

169 211

Description 4ZD1 4ZE1 6VD1 DOHC DOHC

OHV (Chev. Eng.) OHV (Chevrolet Eng) 4XC1 4XC1-T 4XE1W/RLK 4FB1 G180Z 4FB1 G180Z 4XE1W/RLK G200Z 4ZC1-T 4ZD1 4XE1WT/RLK 4XE1W/RLK F23A7

Years 99-00 89-93 89-94 98 99-00 03-06 03-04 05 05-06 05 06 05 05 02 03-04 96-00 97-00 06 06 85-89 87-89 89 81-83 81-84 84 84-85 90 83-87 85-89 88-89 91-92 91 99 98

Model OASIS - LS OASIS - S PICKUP

PICKUP - 1 TON PICKUP - NORMAL CAB

RODEO

RODEO SPORT STYLUS - S STYLUS - XS TROOPER

TROOPER - LS TROOPER - LTD TROOPER - RS TROOPER - S VEHICROSS

266

CID

Liter

2156 2156 1817 1949 2238 2254 2559 2559

2.2 2.2 1.8 1.9 2.2 2.3 2.6 2.6

Honda F22B6 Honda F22B6 G180Z G200Z C223 4ZD1 4ZE1 4ZE1

96-97 96-97 81-82 83-86 81-87 86-95 88-94 88-92

1949 2238 2254 2559 3137

1.9 2.2 2.3 2.6 3.1

G200Z C223 4ZD1 4ZE1 LG6 (Chevrolet Eng.)

87 87 87-95 88-95 91-94

2180 2559 3137

2.2 2.6 4ZE1 3.1 LG6 (Chevrolet Eng.) 3.2 6VD1 SOHC 3.2 DOHC 2.2 3.2 DOHC 1.6 4XE1V/RLR 1.6 4XE1W/RLK 1.9 G200Z 2.2 C223 2.3 4ZD1 2.6 4ZE1 2.8 LL2 (Chevrolet Eng.) 3.5 3.2 6VD1 DOHC 3.2 6VD1 SOHC 3.2 6VD1 SOHC 3.2 6VD1 DOHC 3.2 6VD1 SOHC 3.5

98-03 91-97 91-92

3165 3165 2180 3165 1588 1588 1949 2238 2254 2559 2827 3475 3165 3165 3165 3165 3165 3475

Description

Years

93-97 98-04 01-03 01-03 91-93 91 84-85 84-87 86-87 88-91 89-91 98-02 92-95 97 97 93-95 92-97 99-01

ISUZU Type and Location

Standard Shaft Size

Max. Bearing Thickness

Housing Bore

ENGINE

VIN CYL

1325cc (1.3) G130 1584cc (1.6) G161/W/Z

L4 L4

Vertical Oil Clearance

Bore x Stroke 75mm x 75mm 82mm x 75mm

Max. Overall Length

Material Code

Qty. Set

Bearing Shell No.

Engine Set No. Sizes Available

TORQUE SETTINGS

Connecting Rod 42-45 ft.lbs/57-61 Nm Main Bearing 58-86 ft.lbs/79-116Nm

Rod

Main 1,3,5 2,4

48.925/1.9262 48.940/1.9268

51.985/2.0466 52.000/2.0472

1.513/0.0596 .019/.0007 .075/.0030

22.09/0.870

55.920/2.2016 55.935/2.2022 55.920/2.2016 55.935/2.2022

58.980/2.3220 59.000/2.3228 58.980/2.3220 59.000/2.3228

1.513/0.0596 .019/.0007 .080/.0031 1.513/0.0596 .019/.0007 .080/.0031

32.13/1.265

Thrust 3

62.610/2.4650 79.950/3.1476 62.860/2.4748 80.200/3.1575 Note: Set includes two pieces, use on No. 3 position. Required with 5M2817 main set. Cam - for SOHC engines with 1.770" shaft only. 44.975/1.7707 48.010/1.8902 1.500/0.0591 .035/.0014 1,2,3 (Nominal) 48.030/1.8909 .095/.0037 AR Auxiliary 1,2,3

47.993/1.8895

1.488/0.0586

F780

21.08/0.830

F780

2.36/0.093

F817

25.42/1.001

F23

2816 IH 2817 IH 2818 IH

4B2816 Std. .25 .50 .75 1.0

5M2817 Std. .25 .50 .75 1.0

3286T IH

1T3286

6127

3C6127

Std.

Std. 25.00/0.984

F23

AGB-14-1

3C1190S Std.

ENGINE

VIN CYL

Bore x Stroke

1471cc (1.5) 4XC1 1471cc (1.5) 4XC1-T Turbo 1471cc (1.5) 4XC1 1588cc (1.6) 4XE1WT/RLK Turbo 1588cc (1.6) 4XE1W/RLK 1588cc (1.6) 4XE1V/RLR

7 9 K 4 5 6

77mm x 79mm 77mm x 79mm 77mm x 79mm 80mm x 79mm 80mm x 79mm 80mm x 79mm

L4 L4 L4 L4 L4 L4

TORQUE SETTINGS

Connecting Rod 24-27 ft.lbs/33-37 Nm Main Bearing 61-69 ft.lbs/83-93 Nm

Rod 39.929/1.5720 39.945/1.5726

42.980/1.6921 43.000/1.6929

1.506/0.0593

17.00/0.669

Main - 1990-93 with 2.044" crankshaft journal. 1,2,3,4,5 51.915/2.0439 55.976/2.2038 2.009/0.0791 .020/.0008 51.938/2.0448 55.989/2.2043 .082/.0032

17.13/0.674

Main - 1985-90 with 1.887" crankshaft journal. 1-5 47.918/1.8865 51.976/2.0463 2.010/0.0791 .018/.0007 47.938/1.8873 52.000/2.0472 .089/.0035

17.00/0.669

Thrust 3

59.000/2.3228 73.596/2.8975 59.000/2.3228 73.850/2.9075 Note: Set includes two pieces, use on No. 3 position. Required with 5M1867 main set.

2.21/0.087

Thrust 3

54.700/2.1535 69.700/2.7441 54.900/2.1614 69.900/2.7520 Note: Set includes two pieces, use on No. 3 position. Required with 5M1869 main set.

ENGINE

VIN CYL

1487cc (1.5) 4FA1 Diesel 1817cc (1.8) 4FB1 Diesel 1817cc (1.8) 4FB1 Diesel 1995cc (2.0) 4FC1 Diesel 2189cc (2.2) 4FD1 Diesel

L4 L4 L4 L4 L4

2.20/0.087

Bore x Stroke 76mm x 82mm 84mm x 82mm 84mm x 82mm 84mm x 90mm 88mm x 90mm

F780

F817

F250

4B1870

1870 IH

Std. .25 .50 .75

1867 U/L

Std. .25 .50

1869 U/L

Std. .25 .50 .75

5M1867

5M1869

1867T IH

1T1867

1869T IH

1T1869

Std.

TORQUE SETTINGS

Connecting Rod 58-65 ft.lbs/79-88 Nm Main Bearing 65-72 ft.lbs/88-98 Nm

Rod 48.924/1.9261 48.936/1.9266

51.972/2.0461 51.985/2.0466

1.509/0.0594 .015/.0006 .066/.0026

267

22.00/0.866

F780

1881 IH

4B1881 Std. .25 .50 .75 1.0

ISUZU Engine Set No. Sizes Available

Type and Location

Max. Overall Length

Material Code

Qty. Set

Bearing Shell No.

2.013/0.0793 .023/.0009 .081/.0032

21.75/0.856

F810

1882A U/L

59.980/2.3614 60.000/2.3622

2.013/0.0793 .023/.0009 .081/.0032

21.75/0.856

F810

1882A U

59.980/2.3614 60.000/2.3622

2.013/0.0793 .023/.0009 .081/.0032

21.75/0.856

F810

1883A L

2.36/0.093

F817

1824T IH

2.36/0.093

F817

3286T IH

1.501/0.0591

16.00/0.630

F23

8083

Small End - all engines except 4FD1 (single pieces). 25.000/0.9843 28.025/1.1033 1.529/0.0602 (Nominal) (Nominal)

26.75/1.053

F100

RB4072

Standard Shaft Size

Housing Bore

55.919/2.2015 55.932/2.2020

59.980/2.3614 60.000/2.3622

55.919/2.2015 55.932/2.2020

Vertical Oil Clearance

(Contâ&#x20AC;&#x2122;d.) 5M1883

Main 1,2,4,5

Std. .25 .50 .75 1.0

1T1824 Std.

1T3286 Std.

5C8083 Std.

RB4072 Semi

Max. Bearing Thickness

Thrust - for engines 8/82 on only. 63.750/2.5098 79.934/3.1470 3 64.000/2.5197 80.188/3.1570 Note: Sets include two pieces, use on No. 3 position. Required with 5M1883 main set. Thrust - for engines to 7/82 only. 62.610/2.4650 79.950/3.1476 3 62.860/2.4748 80.200/3.1575 Note: Sets include two pieces, use on No. 3 position. Required with 5M1883 main set. Cam - for 4FB1 & 4FC1 engines only. 29.975/1.1801 31.025/1.2215 1-5 (Nominal) (Nominal)

ENGINE

VIN CYL

1584cc (1.6) 4ZA1 1817cc (1.8) 4ZB1 1994cc (2.0) 4ZC1-T Turbo 2254cc (2.3) 4ZD1

F L

L4 L4 L4 L4

Bore x Stroke 82mm x 75mm 84mm x 82mm 88mm x 82mm 89.3mm x 90mm

TORQUE SETTINGS Connecting Rod 43 ft.lbs/58 Nm Main Bearing 72 ft.lbs/98 Nm

Rod

4B2821

48.925/1.9262 48.940/1.9268

51.987/2.0467 52.000/2.0472

1.513/0.0596 .021/.0008 .076/.0030

22.00/0.866

F810

2821A IH

55.919/2.2015 55.932/2.2020

59.980/2.3614 60.000/2.3622

2.013/0.0793 .022/.0009 .081/.0032

21.75/0.856

F810

1882A IH

63.750/2.5098 79.934/3.1470 64.000/2.5197 80.188/3.1570 Note: Set includes two pieces, use on No. 3 position. Required with 5M1882 main set.

2.36/0.093

F817

1824T IH

Std. .25 .50 .75 1.0 1.25 1.50

5M1882

Main 1-5

Std. .25 .50 .75 1.0

1T1824 Std.

Thrust 3

ENGINE

VIN CYL

Bore x Stroke

1817cc (1.8) G180Z 1817cc (1.8) G180Z

B N

84mm x 82mm 84mm x 82mm

L4 L4

TORQUE SETTINGS Connecting Rod 43 ft.lbs/58 Nm Main Bearing 72 ft.lbs/98 Nm

Rod

4B2816

48.925/1.9262 48.940/1.9268

51.985/2.0466 52.000/2.0472

1.513/0.0596 .019/.0007 .075/.0030

22.09/0.870

F780

2816 IH

55.920/2.2016 55.935/2.2022 55.920/2.2016 55.935/2.2022

58.980/2.3220 59.000/2.3228 58.980/2.3220 59.000/2.3228

1.513/0.0596 .019/.0007 .080/.0031 1.513/0.0596 .019/.0007 .080/.0031

32.13/1.265

F780

21.08/0.830

F780

2817 IH 2818 IH

62.610/2.4650 79.950/3.1476 62.860/2.4748 80.200/3.1575 Note: Set includes two pieces, use on No. 3 position. Required with 5M2817 main set.

2.36/0.093

F817

3286T IH

25.00/0.984

F23

AGB-14-1

Std. .25 .50 .75 1.0

5M2817

Main 1,3,5

Std. .25 .50 .75 1.0 2,4

1T3286 Std.

3C1190S

Thrust 3

AR Auxiliary 1,2,3

47.993/1.8895

1.488/0.0586

Std.

268

ISUZU Type and Location

Standard Shaft Size

Max. Bearing Thickness

Housing Bore

Vertical Oil Clearance

ENGINE

VIN CYL

Bore x Stroke

1949cc (1.9) G200Z

87mm x 82mm

Max. Overall Length

Material Code

Qty. Set

Bearing Shell No.

Engine Set No. Sizes Available

TORQUE SETTINGS

Connecting Rod 43 ft.lbs/58 Nm Main Bearing 72 ft.lbs/98 Nm

Rod 48.925/1.9262 48.940/1.9268

51.987/2.0467 52.000/2.0472

1.513/0.0596 .021/.0008 .076/.0030

Main - for 1986-88 engines (all mains .856" wide). 1-5 55.919/2.2015 59.980/2.3614 2.013/0.0793 .022/.0009 55.932/2.2020 60.000/2.3622 .081/.0032 Main - for 1983-85 engines. 1,3,5 55.920/2.2016 58.980/2.3220 55.935/2.2022 59.000/2.3228 2,4 55.920/2.2016 58.980/2.3220 55.935/2.2022 59.000/2.3228

1.513/0.0596 .019/.0007 .080/.0031 1.513/0.0596 .019/.0007 .080/.0031

Thrust - for 1986-87 engines. 63.750/2.5098 79.934/3.1470 3 64.000/2.5197 80.188/3.1570 Note: Set includes two pieces, use on No. 3 position. Required with 5M1882 main set. Thrust - for 1983-85 engines. 62.610/2.4650 79.950/3.1476 3 62.860/2.4748 80.200/3.1575 Note: Set includes two pieces, use on No. 3 position. Required with 5M2817 main set. AR Auxiliary 1,2,3

47.993/1.8895

22.00/0.866

21.75/0.856

32.13/1.265

F810

F780

21.08/0.830

F780

2.36/0.093

F817

2.36/0.093

1.488/0.0586

F810

25.00/0.984

F817

F23

4B2821

2821A IH

Std. .25 .50 .75 1.0 1.25 1.50

1882A IH

Std. .25 .50 .75 1.0

2817 IH 2818 IH

5M1882

5M2817 Std. .25 .50 .75 1.0

1824T IH

1T1824

3286T IH

1T3286

AGB-14-1

3C1190S

Std.

ENGINE

VIN CYL

1951cc (2.0) C190 Diesel

Bore x Stroke 86mm x 84mm

TORQUE SETTINGS

Connecting Rod 62 ft.lbs / 84 Nm Mains 125 ft.lbs / 170 Nm

Rod - 0.886" wide bearings. 52.918/2.0834 55.980/2.2039 52.930/2.0839 56.000/2.2047

1.513/0.0596 .020/.0008 .079/.0031

22.50/0.886

Rod - 0.846" wide bearings. 52.918/2.0834 55.980/2.2039 52.930/2.0839 56.000/2.2047

1.508/0.0594 .034/.0013 .092/.0036

21.50/0.846

Main - for 6/83 - 1988 engines only. 1,5 59.920/2.3591 63.975/2.5187 59.932/2.3595 64.000/2.5197

2.017/0.0794 .013/.0005 .074/.0029

27.65/1.089

F780

Std. .25 .50 .75 1.0

1830 IH

Std. .25 .50 .75

1188 IH

Std. .25 .50 .75

2,4

59.920/2.3591 59.932/2.3595

63.975/2.5187 64.000/2.5197

2.017/0.0794 .013/.0005 .074/.0029

23.13/0.911

F780

1194 IH

59.920/2.3591 59.932/2.3595

63.975/2.5187 64.000/2.5197

2.017/0.0794 .013/.0005 .074/.0029

28.85/1.136

F780

1189 IH

Main - for 1972-5/83 engines only. 59.920/2.3591 63.975/2.5187 1,5 59.932/2.3595 64.000/2.5197 2,4 59.920/2.3591 63.975/2.5187 59.932/2.3595 64.000/2.5197

2.013/0.0793 .017/.0007 .079/.0031 2.013/0.0793 .017/.0007 .079/.0031

31.10/1.224

F780

23.13/0.911

F780

1193 IH 1194 IH

2.013/0.0793 .017/.0007 .079/.0031

38.10/1.500

F780

1195 IH

72.260/2.8449 86.610/3.4098 2.49/0.098 72.520/2.8551 86.870/3.4201 Note: Set includes two pieces, use on No. 3 position. Required with 5M1193/5M1188 main sets.

F817

1192T IH

59.920/2.3591 59.932/2.3595

63.975/2.5187 64.000/2.5197

Thrust 3

269

4B1320

1320 IH

4B1830

5M1188

5M1193 Std. .25 .50 .75

1T1192 Std.

ISUZU Engine Set No. Sizes Available

Standard Shaft Size

Housing Bore

Max. Bearing Thickness

Vertical Oil Clearance

Max. Overall Length

Material Code

Qty. Set

Bearing Shell No.

2.019/0.0795 .012/.0005 .066/.0026

25.75/1.014

F23

8116

(Contâ&#x20AC;&#x2122;d.) 3C8116 Std.

3C8127 Std.

RB4058 Semi

Type and Location

Cam - for 1972-81 engines only. 47.960/1.8882 52.020/2.0480 1 47.970/1.8886 52.040/2.0488 2

47.960/1.8882 47.970/1.8886

52.020/2.0480 52.040/2.0488

2.019/0.0795 .012/.0005 .066/.0026

25.75/1.014

F23

8117

47.960/1.8882 47.970/1.8886

52.020/2.0480 52.040/2.0488

2.019/0.0795 .012/.0005 .066/.0026

25.75/1.014

F23

8118

Cam - for 1982-88 engines only. 47.940/1.8874 51.999/2.0472 1 47.970/1.8886 52.034/2.0486

2.027/0.0798

22.23/0.875

F23

8127

47.940/1.8874 47.970/1.8886

51.999/2.0472 52.034/2.0486

2.027/0.0798

22.23/0.875

F23

8128

47.940/1.8874 47.970/1.8886

51.999/2.0472 52.034/2.0486

2.027/0.0798

22.23/0.875

F23

8129

Small End - single pieces. For 1972-81 engines only. 26.995/1.0628 30.000/1.1811 1.730/0.0681 27.000/1.0630 30.025/1.1821

33.48/1.318

F100

RB4058

ENGINE

VIN CYL

Bore x Stroke

2156cc (2.2) Honda F22B6

85mm x 95mm

TORQUE SETTINGS Connecting Rod 34 ft.lbs/46 Nm Main Bearing 52 ft.lbs/70 Nm

Rod

4B1936 Std. .25 .50 .75 1.0

5M1937

Main 1-5

Std. .25 .50

1T1937 Std.

47.955/1.8880 47.976/1.8888

51.003/2.0080 51.024/2.0088

1.504/0.0592 .020/.0008 .086/.0034

19.40/0.764

F780

1936 IH

49.980/1.9677 50.000/1.9685

54.000/2.1260 54.020/2.1268

2.004/0.0789

20.00/0.787

F780

1937 IH

2.49/0.098

F817

1937T IH

2370 IH

Thrust 4

57.650/2.2697 77.600/3.0551 57.900/2.2795 77.850/3.0650 Note: Set includes two pieces, use on No. 4 position. Required with 5M1937 main set.

ENGINE

VIN CYL

Bore x Stroke

2180cc (2.2) OHV (Chev. Eng.) 2180cc (2.2) OHV (Chev. Eng.)

4 5

3.50 x 3.46 3.50 x 3.46

L4 L4

TORQUE SETTINGS Connecting Rod 38 ft.lbs/51 Nm Main Bearing 70 ft.lbs/95 Nm

Rod

4B745P

50.775/1.9990 50.800/2.0000

Std. 01 10 20 30 40

53.967/2.1247 53.980/2.1252

1.577/0.0621 .013/.0005 .077/.0030

21.38/0.842

F780

Main - for Trucks (1996-97). (This set contains shells that have the same tang location for positions #1,2,3 & 5) 1,2,3,5 63.360/2.4945 68.250/2.6870 2.423/0.0954 .021/.0008 18.72/0.737 F780 8 7123 Std. .25 .50 .75 1.0 63.383/2.4954 68.273/2.6880 .093/.0037 IH 4 (Fl) 63.360/2.4945 68.250/2.6870 2.423/0.0954 .021/.0008 23.93/0.942 F780 2 7124 63.383/2.4954 68.273/2.6880 .093/.0037 IH Overflange length remains constant for standard and undersizes.

5M7124P

Main - for Trucks (1998 on). Different tang location for #3 position bearing. 1,2,5 63.358/2.4944 68.250/2.6870 2.423/0.0954 .021/.0008 18.72/0.737 63.383/2.4954 68.275/2.6880 .097/.0038 Std. .25 .50 .75 1.0

5M7164P

63.358/2.4944 68.250/2.6870 2.423/0.0954 63.383/2.4954 68.275/2.6880 4 (Fl) 63.358/2.4944 68.250/2.6870 2.423/0.0954 63.383/2.4954 68.275/2.6880 Overflange length remains constant for standard and undersizes.

270

.021/.0008 .097/.0038 .021/.0008 .097/.0038

F780

7123 IH

20.75/0.817

F780

23.93/0.942

F780

7164 IH 7124 IH

ISUZU Type and Location

Standard Shaft Size

Max. Bearing Thickness

Housing Bore

Vertical Oil Clearance

Max. Overall Length

Material Code

Qty. Set

Bearing Shell No.

Engine Set No. Sizes Available

(Contâ&#x20AC;&#x2122;d.) Main - Alt set to 5M7164P with +0.010" overflange length increase. * See dimensional information below. 63.358/2.4944 68.250/2.6870 2.548/0.1003 .021/.0008 18.72/0.737 F780 6 1,2,5 63.383/2.4954 68.275/2.6880 (@ 0.25 mm u/s) .097/.0038 3

63.358/2.4944 63.383/2.4954

7123 IH

68.250/2.6870 2.548/0.1003 .021/.0008 68.275/2.6880 (@ 0.25 mm u/s) .097/.0038

20.75/0.817

F780

7164 IH

63.358/2.4944 68.250/2.6870 2.548/0.1003 .021/.0008 63.383/2.4954 68.275/2.6880 (@ 0.25 mm u/s) .097/.0038 Stock not available from fee warehouses.

24.18/0.952

F780

7183 IH

4 (Fl)

5M7183P .25 .50 .75 1.0

47.440/1.8677 47.490/1.8697 47.440/1.8677 47.490/1.8697 47.440/1.8677 47.490/1.8697

51.283/2.0190 51.308/2.0200 51.029/2.0090 51.079/2.0110 50.775/1.9990 50.825/2.0010

ENGINE

1.880/0.0741

16.00/0.630

F23

CH-19-1

1.750/0.0691

16.00/0.630

F23

CH-18-4

1.630/0.0640

16.13/0.635

F23

CH-18-2

Std.

VIN CYL

2180cc (2.2) (X22SE) 2180cc (2.2) (X22SE)

5C1195S

L4 L4

Bore x Stroke

TORQUE SETTINGS

86mm x 94.6mm 86mm x 94.6mm

Connecting Rod 25 ft.lbs / 35 Nm + 45 deg + 15 deg Tighten in three stages

Main Bearing 37 ft.lbs / 50 Nm + 45 deg + 15 deg Tighten in three stages Rod 48.971/1.9280 48.987/1.9286 Supercedes 4B1408P.

52.000/2.0472 52.012/2.0477

1.500/0.0591 .013/.0005 .057/.0022

Main - two oil holes in flange bearing. 1,2,4,5 57.982/2.2828 62.000/2.4409 1.995/0.0785 .015/.0006 57.995/2.2833 62.013/2.4415 .066/.0026 3 (Fl) 57.974/2.2824 60.000/2.3622 1.995/0.0785 57.995/2.2833 60.013/2.3627 Overflange length increases for undersizes. *See below for dimensional information.

19.30/0.760

19.50/0.768 25.90/1.020

F810

F780 F780

8 2

2322A U/L

2327 IH 2325 IH

4B2322A Std. .25 .50 .75 1.0

5M2325 Std. .25 .50 .75 1.0

ENGINE

VIN CYL

2207cc (2.2) C221 Diesel 2369cc (2.4) C240 Diesel

L4 L4

Bore x Stroke

TORQUE SETTINGS

83mm x 102mm 86mm x 102mm

Connnecting Rod 56-59 ft.lbs/76-80 Nm Main Bearing 115-130 ft.lbs/156-176 Nm

Rod - 0.886" wide bearings. 52.918/2.0834 55.980/2.2039 52.930/2.0839 56.000/2.2047

1.513/0.0596 .020/.0008 .079/.0031

22.50/0.886

Rod - 0.846" wide bearings. 52.918/2.0834 55.980/2.2039 52.930/2.0839 56.000/2.2047

1.508/0.0594 .034/.0013 .092/.0036

21.50/0.846

271

F780

4B1320

1320 IH

Std. .25 .50 .75 1.0

1830 IH

Std. .25 .50 .75

4B1830

ISUZU Engine Set No. Sizes Available

Type and Location

Max. Overall Length

Material Code

Qty. Set

Bearing Shell No.

2.014/0.0793 .022/.0009 .079/.0031

30.63/1.206

F780

1322 IH

73.980/2.9126 74.000/2.9134

2.014/0.0793 .022/.0009 .079/.0031

21.53/0.848

F780

1323 IH

73.980/2.9126 74.000/2.9134

2.014/0.0793 .022/.0009 .079/.0031

36.13/1.422

F780

1324 IH

78.250/3.0807 92.450/3.6398 78.500/3.0905 92.700/3.6496 Note: Set includes two pieces, use on No. 3 position. Required with 5M1322 main set.

2.48/0.098

F817

1893T IH

25.75/1.014

F23

8116

25.75/1.014

F23

8117

25.75/1.014

F23

8118

Standard Shaft Size

Housing Bore

69.920/2.7528 69.930/2.7531

73.980/2.9126 74.000/2.9134

2,4

69.920/2.7528 69.930/2.7531

Max. Bearing Thickness

Vertical Oil Clearance

11 (Contâ&#x20AC;&#x2122;d.) 5M1322

Main 1,5

Std. .25 .50 .75 1.0

1T1893 Std.

3C8116 Std.

3C8127 Std.

Thrust 3

Cam - for 1968-81 engines only. 47.960/1.8882 52.020/2.0480 1 47.970/1.8886 52.040/2.0488 2 47.960/1.8882 52.020/2.0480 47.970/1.8886 52.040/2.0488 3 47.960/1.8882 52.020/2.0480 47.970/1.8886 52.040/2.0488 Cam - for 1982-88 engines. 47.940/1.8874 51.999/2.0472 1 47.970/1.8886 52.034/2.0486

2.027/0.0798

22.23/0.875

F23

8127

2.027/0.0798

22.23/0.875

F23

8128

2.027/0.0798

22.23/0.875

F23

8129

34.29/1.350

F100

RB4013

Small End - I.D. bored, single pieces. For 1969-81 C240 engines only. 26.995/1.0628 30.000/1.1811 1.730/0.0681 33.48/1.318 27.000/1.0630 30.025/1.1821

F100

RB4058

RB4013 Std.

RB4058 Semi

2.019/0.0795 .012/.0005 .066/.0026 2.019/0.0795 .012/.0005 .066/.0026 2.019/0.0795 .012/.0005 .066/.0026

47.940/1.8874 47.970/1.8886 47.940/1.8874 47.970/1.8886

51.999/2.0472 52.034/2.0486 51.999/2.0472 52.034/2.0486

Small End - I.D. bored, single pieces. For C221 engines only. 24.995/0.9841 27.995/1.1022 1.727/0.0680 25.000/0.9843 28.000/1.1024

ENGINE

VIN CYL

Bore x Stroke

2238cc (2.2) C223 Diesel 2238cc (2.2) C223 Turbo Diesel

S U

88mm x 92mm 88mm x 92mm

4B1320 Std. .25 .50 .75 1.0

4B1830 Std. .25 .50 .75

5M1188 Std. .25 .50 .75

Std. .25 .50 .75

1T1192 Std.

Connecting Rod 58-65 ft.lbs/79-88 Nm Main Bearing 116-130 ft.lbs/158-177 Nm

Rod - Naturally Aspirated engines only. 52.918/2.0834 55.980/2.2039 1.513/0.0596 .020/.0008 52.930/2.0839 56.000/2.2047 .079/.0031

22.50/0.886

F780

1320 IH

Rod - Turbo engines only. 52.918/2.0834 55.980/2.2039 52.930/2.0839 56.000/2.2047

21.50/0.846

F780

1830 IH

Main - Naturally Aspirated engines only. 59.920/2.3591 63.975/2.5187 2.017/0.0794 .013/.0005 1,5 59.932/2.3595 64.000/2.5197 .074/.0029

27.65/1.089

F780

1188 IH

2,4

1194 IH 1189 IH

59.920/2.3591 59.932/2.3595 59.920/2.3591 59.932/2.3595

1.508/0.0594 .034/.0013 .092/.0036

63.975/2.5187 64.000/2.5197 63.975/2.5187 64.000/2.5197

2.017/0.0794 .013/.0005 .074/.0029 2.017/0.0794 .013/.0005 .074/.0029

23.13/0.911

F780

28.85/1.136

F780

Main - Turbo engines only. 1,5 59.920/2.3591 63.975/2.5187 59.932/2.3595 64.000/2.5197 2,4 59.920/2.3591 63.975/2.5187 59.932/2.3595 64.000/2.5197 3 59.920/2.3591 63.975/2.5187 59.932/2.3595 64.000/2.5197

2.012/0.0792 .023/.0009 .084/.0033 2.012/0.0792 .023/.0009 .084/.0033 2.012/0.0792 .023/.0009 .084/.0033

27.65/1.089

F780

21.13/0.832

F780

28.85/1.136

F780

72.260/2.8449 86.610/3.4098 2.49/0.098 72.520/2.8551 86.870/3.4201 Note: Set includes two pieces, use on No. 3 position. Required with 5M1188/5M1827 main sets.

F817

5M1827

L4 L4

TORQUE SETTINGS

Thrust 3

272

1827 U/L 1829 U/L 1828 U/L 1192T IH

ISUZU Type and Location

Standard Shaft Size

Max. Bearing Thickness

Housing Bore

Vertical Oil Clearance

Max. Overall Length

Material Code

Qty. Set

Bearing Shell No.

Engine Set No. Sizes Available

(Contâ&#x20AC;&#x2122;d.) Cam 1

47.940/1.8874 47.970/1.8886

51.999/2.0472 52.034/2.0486

2.027/0.0798

22.23/0.875

F23

8127

47.940/1.8874 47.970/1.8886

51.999/2.0472 52.034/2.0486

2.027/0.0798

22.23/0.875

F23

8128

47.940/1.8874 47.970/1.8886

51.999/2.0472 52.034/2.0486

2.027/0.0798

22.23/0.875

F23

8129

ENGINE

L4 L4

Rod - Race Series material. 44.976/1.7707 48.000/1.8898 45.000/1.7717 48.024/1.8907

Bore x Stroke 86mm x 97mm 86mm x 97mm

1.502/0.0591 .032/.0013 .050/.0020

TORQUE SETTINGS

Connecting Rod 34 ft.lbs/45 Nm Main Bearing 22 ft.lbs/30 Nm Stage 1 Main Bearing 58 ft.lbs/78 Nm Stage 2

15.50/0.610

F781

1906H IH

54.980/2.1646 55.000/2.1654

59.000/2.3228 59.020/2.3236

2.007/0.0790 .005/.0002 .072/.0028

Thrust 4

61.250/2.4114 81.750/3.2185 61.500/2.4213 82.000/3.2283 Note: Set includes two pieces, use on No. 4 position. Required with 5M1937 main set.

ENGINE

VIN CYL

2499cc (2.5) 4JA1 Diesel 2771cc (2.8) 4JB1 Diesel 2771cc (2.8) 4JB1-T Turbo Diesel

3C8127 Std.

VIN CYL

2234cc (2.3) (F23A7) 2254cc (2.3) F23A7

L4 L4 L4

20.00/0.787

2.50/0.098

Bore x Stroke 93mm x 92mm 93mm x 92mm 93mm x 92mm

F780

F817

1957 IH 1957T IH

4B1906H Std. .025 .25 .50

4B1906HX Std.

5M1957 Std. .25 .50 .75 1.0

1T1957 Std.

TORQUE SETTINGS

Connecting Rod 59-65 ft.lbs/80-88 Nm Main Bearing 123 ft.lbs/167Nm

Rod 52.930/2.0839 56.000/2.2047 1.513/0.0596 25.83/1.017 F820 8 1890AL (Nominal) (Nominal) IH Note: The crankshafts in these engines have been hardened by Nitriding or Tuftriding by the manuafcturer and this hardness must be maintained after grinding the shaft. Main - for 4JA1 engines only. 1,2,3,4,5 59.920/2.3591 63.987/2.5192 59.930/2.3594 64.000/2.5197

2.004/0.0789 .049/.0019 .098/.0039

23.03/0.907

Main - for 4JB1 engines only. 1,2,3,4,5 69.920/2.7528 73.975/2.9124 69.930/2.7531 74.000/2.9134

2.004/0.0789 .037/.0015 .098/.0039

23.03/0.907

Thrust - for 4JA1 engines only. 72.260/2.8449 86.610/3.4098 3 72.520/2.8551 86.870/3.4201 Note: Set includes two pieces, use on No. 3 position. Required with 5M1892 main sets. Thrust - for 4JB1 engines only. 78.250/3.0807 92.450/3.6398 3 78.500/3.0905 92.700/3.6496 Note: Set includes two pieces, use on No. 3 position. Required with 5M1893 main set. Cam 1 2, 3

2.49/0.098

2.48/0.098

F820

F780

F817

4B1890 Std. .25 .50 .75 1.0

5M1892

1892AL U/L

Std. .25 .50 .75 1.0

1893 U/L

Std. .25 .50 .75 1.0

5M1893

1192T IH

1T1192

1893T IH

1T1893

3C8084

49.975/1.9675 (Nominal)

54.036/2.1274 (Nominal)

2.025/0.0797

25.00/0.984

F23

8084

49.975/1.9675 (Nominal)

54.036/2.1274 (Nominal)

2.025/0.0797

22.00/0.866

F23

8085

Std.

Small End - Not bored, single pieces. Suits 4JA1 (85-90), 4JB1 (85-90) & 4JB1 Turbo engines up to 9/88. 30.995/1.2203 37.000/1.4567 33.00/1.299 F100 1 31.000/1.2205 (Nominal)

273

RB4103

RB4103 Semi

ISUZU Engine Set No. Sizes Available

Type and Location

Standard Shaft Size

Max. Bearing Thickness

Housing Bore

Vertical Oil Clearance

Max. Overall Length

Material Code

Qty. Set

Bearing Shell No.

F100

RB4104

14 (Contâ&#x20AC;&#x2122;d.) RB4104 Semi

Small End - Not bored, single pieces. Suits 4JB1 Turbo engines from 9/88 on. 33.994/1.3383 37.000/1.4567 33.00/1.299 34.000/1.3386 (Nominal)

ENGINE

VIN CYL

Bore x Stroke

2559cc (2.6) 4ZE1

92.6mm x 95mm

TORQUE SETTINGS Connecting Rod 43 ft.lbs/58 Nm Main Bearing 72 ft.lbs/98 Nm

Rod

4B1820 Std. .25 .50 .75 1.0

5M1824

Main 1-5

Std. .25 .50 .75 1.0

1T1824 Std.

48.927/1.9263 48.940/1.9268

51.985/2.0466 52.005/2.0474

1.510/0.0594 .025/.0010 .084/.0033

22.00/0.866

F780

1820 IH

55.919/2.2015 55.932/2.2020

59.980/2.3614 60.000/2.3622

2.008/0.0791 .032/.0013 .091/.0036

21.75/0.856

F780

1824 U/L

2.36/0.093

F817

1824T IH

Thrust 3

63.750/2.5098 79.934/3.1470 64.000/2.5197 80.188/3.1570 Note: Set includes two pieces, use on No. 3 position. Required with 5M1824 set.

ENGINE

VIN CYL

Bore x Stroke

169 2770cc (2.8)

936mm x 101.6mm Connecting Rod 18 ft.lbs + 110 deg Main Bearing 18 ft.lbs + 180 deg

TORQUE SETTINGS

Rod

4B2290A

56.691/2.2319 56.707/2.2326

Std. .25 .50 .75

4B2290AO/S2 .25 .50 .75 1.0

VIN CYL

2775cc (2.8) 4BA1 Diesel 3595cc (3.6) 4BB1 Diesel

Std. .25 .50 .75 1.0 1.25 1.50

5M1894 Std. .25 .50 .75

2T1888 Std.

2T1889 Std.

3C8081 Std.

Std.

L4 L4

Bore x Stroke 98mm x 92mm 102mm x 110mm

20.75/0.817

F810

2290A IH

20.75/0.817

F810

9102A IH

TORQUE SETTINGS Connecting Rod 80-87 ft.lbs/108-118 Nm Main Bearing 167-187 ft.lbs/226-254 Nm

Rod - order number of pairs required per engine. 63.932/2.5170 68.000/2.6772 2.012/0.0792 .032/.0013 63.944/2.5175 68.015/2.6778 .084/.0033

29.80/1.173

F780

1886 IH

Main - for engines from 11/85 - 88. Notch width of 4.4mm. 1,2,3U, 75.913/2.9887 81.006/3.1892 2.525/0.0994 .031/.0012 75.925/2.9892 81.019/3.1897 .081/.0032 4,5

27.80/1.094

F780

1894 IH

27.80/1.094

F780

1895 L

2.50/0.098

F250

1888T U/L

2.50/0.098

F780

1889T U/L

1.995/0.0785 .040/.0016 .161/.0063

20.00/0.787

F23

8082

60.000/2.3622 60.046/2.3640

1.995/0.0785 .040/.0016 .161/.0063

20.00/0.787

F23

8081

Cam - for engines from 1973 - 76. 1 55.945/2.2026 60.000/2.3622 55.970/2.2035 60.046/2.3640 2,3,4 55.945/2.2026 60.000/2.3622 55.970/2.2035 60.046/2.3640

1.995/0.0785 .040/.0016 .161/.0063 1.995/0.0785 .040/.0016 .161/.0063

20.00/0.787

F23

8082

20.00/0.787

F23

8081

75.913/2.9887 75.925/2.9892

81.006/3.1892 81.019/3.1897

2.505/0.0986 .071/.0028 .122/.0048

Thrust - for engines from 1973 to 10/85. 84.500/3.3268 101.000/3.9764 4 (Nominal I.D.) (Nominal O.D.) Note: Set includes four pieces, use on No. 4 position. Thrust - for engines from 11/85 - 88. 88.000/3.4646 101.000/3.9764 4 (Nominal I.D.) (Nominal O.D.) Note: Set includes four pieces, use on No. 4 position. Required with 5M1894 main set. Cam - for engines from 1977 - 88. 55.945/2.2026 60.000/2.3622 1 55.970/2.2035 60.046/2.3640 2,3

4C8081

1.802/0.0709 .011/.0004 .059/.0023

Rod - .002" oversize back version of 4B2290A. 56.691/2.2319 60.372/2.3768 1.952/0.0769 .011/.0004 56.707/2.2326 60.388/2.3775 (@ 0.25mm u/size) .059/.0023

ENGINE

2B1886

60.322/2.3749 60.338/2.3755

55.945/2.2026 55.970/2.2035

274

ISUZU Type and Location

Standard Shaft Size

Max. Bearing Thickness

Housing Bore

Vertical Oil Clearance

Max. Overall Length

Material Code

Qty. Set

Bearing Shell No.

Engine Set No. Sizes Available

(Contâ&#x20AC;&#x2122;d.) Small End - not bored, single pieces. Suits 4BB1 engines only. 34.995/1.3778 38.000/1.4961 35.000/1.3780 38.025/1.4970

ENGINE

VIN CYL

2827cc (2.8) LL2 (Chevrolet Eng.) R 3137cc (3.1) LG6 (Chevrolet Eng.) Z

V6 V6

38.00/1.496

Bore x Stroke

Rod - .002" oversize OD version of 6B1238A. 50.759/1.9984 53.962/2.1245 1.727/0.0680 .014/.0006 50.785/1.9994 53.988/2.1255 (@ .010" u/s) .080/.0031

18.29/0.720

72.149/2.8405 72.174/2.8415

F810

7116A

67.239/2.6472 72.149/2.8405 67.264/2.6482 72.174/2.8415 3 (Fl) 67.239/2.6472 72.149/2.8405 67.264/2.6482 72.174/2.8415 To be discontinued when stock exhausted.

F810

.033/.0013 .109/.0043 .033/.0013 .109/.0043

24.80/0.976 18.75/0.738

F810

2.426/0.0955 .033/.0013 .109/.0043

23.93/0.942

F810

2.426/0.0955 .025/.0010 .102/.0040 2.426/0.0955 .025/.0010 .102/.0040

6B1238A Std. 01 10 20 30 40

9036A IH 7237A U/L 7238A U/L

18.75/0.738

F780

24.18/0.952

F780

6B1238AO/S2 10 20 30 40

4M2037A Std. .25 .50 .75 1.0

7239A U/L

RB4073

TORQUE SETTINGS

18.29/0.720

67.239/2.6472 67.264/2.6482

RB4073

Connecting Rod 34-40 ft.lbs/47-54 Nm Main Bearing 63-74 ft.lbs/85-101 Nm

Rod - High Strength Aluminum Silicon material. 50.759/1.9984 54.013/2.1265 1.575/0.0620 .027/.0011 50.785/1.9994 54.039/2.1275 .105/.0041

3 (Fl)

Semi

89mm x 76mm 89mm x 84mm

Main - High Strength Aluminum Silicon material. 1,4 67.239/2.6472 72.149/2.8405 2.426/0.0955 67.264/2.6482 72.174/2.8415 2 67.239/2.6472 72.149/2.8405 2.426/0.0955 67.264/2.6482 72.174/2.8415

F100

4M7122P .25 .50 .75 1.0

7238 U/L 7122 U/L

1.760/0.0691

16.00/0.630

F23

CH-18-1A

1.630/0.0640

16.13/0.635

F23

CH-18-2

1.760/0.0691

16.00/0.630

F23

CH-18-4

Cam - optional set to 4C1102S with 0.725" wide #2 and #3 bushes. 47.440/1.8677 51.029/2.0090 1.760/0.0691 1 47.490/1.8697 51.079/2.0110

16.00/0.630

F23

CH-18-1A

2,3

1.630/0.0640

18.42/0.725

F23

CH-18-2A

1.760/0.0691

16.00/0.630

F23

CH-18-4

2,3 4

47.440/1.8677 47.490/1.8697 47.440/1.8677 47.490/1.8697

51.029/2.0090 51.079/2.0110 50.775/1.9990 50.825/2.0010

47.440/1.8677 47.490/1.8697

51.029/2.0090 51.079/2.0110

47.440/1.8677 47.490/1.8697 47.440/1.8677 47.490/1.8697

50.775/1.9990 50.825/2.0010 51.029/2.0090 51.079/2.0110

4C1102S Std.

4C1102SW Std.

275

ISUZU Engine Set No. Sizes Available

Type and Location

Standard Shaft Size

Housing Bore

Max. Bearing Thickness

Vertical Oil Clearance

ENGINE

VIN CYL

Bore x Stroke

3165cc (3.2) 6VD1 SOHC 3165cc (3.2) 6VD1 DOHC 3165cc (3.2) DOHC (6VD1) 3165cc (3.2) DOHC (6VD1) 3475cc (3.5) (6VE1) 3475cc (3.5) (6VE1) 3491cc (3.5) (6VE1)

V W

93.4mm x 77mm 93.4mm x 77mm 93.4mm x 77mm 93.4mm x 77mm 93.4mm x 77mm 93.4mm x 77mm 93.4mm x 77mm

W X X

V6 V6 V6 V6 V6 V6 V6

Max. Overall Length

Material Code

Qty. Set

Bearing Shell No.

TORQUE SETTINGS Connecting Rod 40 ft. lbs/54 Nm Main Bearing 29 ft.lbs/39 Nm Consult Service Manuals for tightening sequence.

Rod

6B1840 Std. .25 .50 .75 1.0

4M1842

Main 1,4

Std. .25 .50 .75 1.0 2,3

53.922/2.1229 53.937/2.1235

56.982/2.2434 57.000/2.2441

1.513/0.0596 .019/.0007 .078/.0031

17.12/0.674

F780

1840 IH

63.919/2.5165 63.932/2.5170 63.919/2.5165 63.932/2.5170

68.979/2.7157 68.999/2.7165 68.979/2.7157 68.999/2.7165

2.527/0.0995 .025/.0010 .084/.0033 2.527/0.0995 .025/.0010 .084/.0033

18.50/0.728

F780

16.50/0.650

F780

1842 IH 1843 U/L

1.95/0.077

F817

Thrust

1T1842 Std.

71.000/2.7953 97.550/3.8405 71.250/2.8051 97.800/3.8504 Note: Set includes two pieces. Required with 4M1842 main set.

ENGINE

VIN CYL

3268cc (3.3) 4BC1 Diesel 3268cc (3.3) 4BC2 Diesel

2B1886 Std. .25 .50 .75 1.0 1.25 1.50

5M1894 Std. .25 .50 .75

2T1888 Std.

2T1889 Std.

3C8081

Connecting Rod 80-87 ft.lbs/108-118 Nm Main Bearing 167-187 ft.lbs/226-254 Nm

29.80/1.173

F780

1886 IH

Main - for 4BC1, 10/81-1984. 4BC2, 2/80 on. Notch width of 4.4mm. 1,2,3U, 75.913/2.9887 81.006/3.1892 2.525/0.0994 .031/.0012 27.80/1.094 75.925/2.9892 81.019/3.1897 .081/.0032 4,5

F780

1894 IH

27.80/1.094

F780

1895 L

2.50/0.098

F250

1888T U/L

2.50/0.098

F780

1889T U/L

75.913/2.9887 75.925/2.9892

81.006/3.1892 81.019/3.1897

2.505/0.0986 .071/.0028 .122/.0048

Thrust - for 4BC1, 1979 - 9/81. 4BC2, 2/80 - 10/84. 84.500/3.3268 101.000/3.9764 4 (Nominal I.D.) (Nominal O.D.) Note: Set includes four pieces, use on No. 4 position. Thrust - for 4BC1,10/81-1984. 4BC2 11/84 on. 88.000/3.4646 101.000/3.9764 4 (Nominal I.D.) (Nominal O.D.) Note: Set includes four pieces, use on No. 4 position. Cam 1 2,3

Semi

102mm x 100mm 102mm x 100mm

TORQUE SETTINGS

Rod - order number of pairs required per engine. 63.932/2.5170 68.000/2.6772 2.012/0.0792 .032/.0013 63.944/2.5175 68.015/2.6778 .084/.0033

Std.

RB4073

L4 L4

Bore x Stroke

1842T IH

55.945/2.2026 55.970/2.2035

60.000/2.3622 60.046/2.3640

1.995/0.0785 .040/.0016 .161/.0063

20.00/0.787

F23

8082

55.945/2.2026 55.970/2.2035

60.000/2.3622 60.046/2.3640

1.995/0.0785 .040/.0016 .161/.0063

20.00/0.787

F23

8081

38.00/1.496

F100

RB4073

Small End - for 4BC2 engines only. Not bored, single pieces. 34.995/1.3778 38.000/1.4961 35.000/1.3780 38.025/1.4970

ENGINE

VIN CYL

Bore x Stroke

211 3460cc (3.5)

93mm x 101.6mm

TORQUE SETTINGS Connecting Rod 18 ft.lbs + 110 deg Main Bearing 18 ft.lbs + 180 deg

Rod

5B2290A Std. .25 .50 .75

5B2290AO/S2 .25 .50 .75 1.0

56.694/2.2320 56.707/2.2326

60.322/2.3749 60.338/2.3755

1.802/0.0709 .011/.0004 .059/.0023

Rod - .002" oversize back version of 5B2290A. 56.691/2.2319 60.372/2.3768 1.952/0.0769 .011/.0004 56.707/2.2326 60.388/2.3775 (@ 0.25mm u/size) .059/.0023

276

20.75/0.817

F810

2290A IH

20.75/0.817

F810

9102A IH

ISUZU Type and Location

Standard Shaft Size

Max. Bearing Thickness

Housing Bore

ENGINE

VIN CYL

3856cc (3.9) 4BD1 Diesel 3856cc (3.9) 4BD1-T Turbo Diesel

L4 L4

Vertical Oil Clearance

Max. Overall Length

Bore x Stroke

29.80/1.173

Main - notch width of 4.5 mm. 1,2,3,4,5 79.913/3.1462 85.000/3.3465 79.925/3.1466 85.019/3.3472

26.28/1.035

Thrust 4

88.000/3.4646 101.000/3.9764 (Nominal I.D.) (Nominal O.D.) Note: Set includes four pieces, use on No. 4 position. Required with 5M1884 main set.

2,3

2.50/0.098

Engine Set No. Sizes Available

F780

2B1886

1886 IH

Std. .25 .50 .75 1.0 1.25 1.50

1884 U/L

Std. .25 .50 .75

5M1884

1889T U/L

2T1889

3C8081

55.945/2.2026 55.970/2.2035

60.000/2.3622 60.046/2.3640

1.995/0.0785 .040/.0016 .161/.0063

20.00/0.787

F23

8082

55.945/2.2026 55.970/2.2035

60.000/2.3622 60.046/2.3640

1.995/0.0785 .040/.0016 .161/.0063

20.00/0.787

F23

8081

38.00/1.496

F100

RB4073

Small End - not bored, single pieces. 34.995/1.3778 38.000/1.4961 35.000/1.3780 38.025/1.4970

Std.

RB4073 Semi

ENGINE

VIN CYL

Bore x Stroke

256 (4.2)

93mm x 102mm

TORQUE SETTINGS

Connecting Rod 18 ft.lbs + 110 deg Main Bearing 18 ft.lbs + 180 deg

Rod - High Strength Aluminum Silicon material. 56.691/2.2319 60.322/2.3749 1.798/0.0708 .011/.0004 56.707/2.2326 60.338/2.3755 .059/.0023

20.75/0.817

Rod - .002" oversize OD version of 6B2290A. 56.691/2.2319 60.372/2.3768 1.952/0.0769 .011/.0004 56.707/2.2326 60.388/2.3775 (@ .25mm u/s) .059/.0023

20.75/0.817

Main 1,2,3,4,6, 7 5 (Fl)

Bearing Shell No.

Connecting Rod 90 ft.lbs Main Bearing 180 ft.lbs

Rod - order number of pairs required per engine. 63.932/2.5170 68.000/2.6772 2.012/0.0792 .032/.0013 63.944/2.5175 68.015/2.6778 .084/.0033

Cam 1

Qty. Set

TORQUE SETTINGS

102mm x 118mm 102mm x 118mm

2.518/0.0991 .039/.0015 .096/.0038

Material Code

F810

F820

2290A IH 9102A IH

69.967/2.7546 69.982/2.7552

78.069/3.0736 78.087/3.0743

4.044/0.1592 .007/.0003 .050/.0020

20.68/0.814

MB3781P U/L

69.967/2.7546 69.982/2.7552

78.069/3.0736 78.087/3.0743

4.044/0.1592 .007/.0003 .050/.0020

25.35/0.998

F820

MB3782P U/L

22.997/0.9054 23.000/0.9055

25.857/1.0180

1.372/0.0540

23.75/0.935

F100

223-3664

6B2290A Std. .25 .50 .75 1.0

6B2290AO/S2 .25 .50 .75 1.0

7M2224A Std. 10 20

Small End

AB3664 Semi

ENGINE

VIN CYL

Bore x Stroke

4294cc (4.3) OHV (Chevrolet Eng)

4.000 x 3.484

TORQUE SETTINGS

Connecting Rod 45 ft.lbs/61 Nm Main Bearing 70 ft.lbs/95 Nm

Rod - High Strength Aluminum Silicon material. 57.130/2.2492 60.317/2.3747 1.575/0.0620 .022/.0009 57.145/2.2498 60.342/2.3757 .089/.0035

18.92/0.745

Rod - .002" oversize OD version of 6B1358A. 57.130/2.2492 60.368/2.3767 1.613/0.0635 .022/.0009 57.145/2.2498 60.393/2.3777 (@ .010" u/s) .089/.0035

18.92/0.745

F810

7111A

6B1358A Std. 01 10 20 30 40

F810

9042A IH

6B1358AO/S2 10 20 30 40

Rod 57.130/2.2492 57.145/2.2498

60.317/2.3747 60.342/2.3757

1.575/0.0620 .022/.0009 .089/.0035

Main - High Strength Aluminum Silicon material. 1,2,3 62.189/2.4484 67.071/2.6406 2.426/0.0955 62.212/2.4493 67.094/2.6415 4 62.177/2.4479 67.071/2.6406 2.426/0.0955 62.200/2.4488 67.094/2.6415

.007/.0003 .079/.0031 .020/.0008 .091/.0036

277

18.92/0.745

20.50/0.807 43.64/1.718

F780

F810 F810

6 2

7111 IH 2377A U/L 2378A U/L

6B1358P Std. 01 10 20 30 40 50 60

4M1454A Std. 01 10 20 30 40

ISUZU Engine Set No. Sizes Available

Type and Location

Max. Overall Length

Material Code

Qty. Set

Bearing Shell No.

2.426/0.0955 .007/.0003 .079/.0031

20.50/0.807

F780

2377 U/L

62.177/2.4479 67.071/2.6406 2.426/0.0955 .020/.0008 62.200/2.4488 67.094/2.6415 .091/.0036 Overflange length remains constant for standard and undersizes.

43.64/1.718

F780

2378 U/L

Standard Shaft Size

Housing Bore

62.189/2.4484 62.212/2.4493

67.071/2.6406 67.094/2.6415

Max. Bearing Thickness

Vertical Oil Clearance

24 (Contâ&#x20AC;&#x2122;d.) 4M1454P

Main 1,2,3

Std. 01 10 20 30 40 4 (Fl)

4M1628P 10 20 30 40

62.177/2.4479 67.071/2.6406 62.200/2.4488 67.094/2.6415 To be discontinued when stock exhausted.

.010" u/s shaft .020" u/s shaft .030" u/s shaft .040" u/s shaft

4M1684P 20 30 40

2.426/0.0955 .020/.0008 .091/.0036

44.15/1.738

F780

2379 U/L

* DIMENSIONAL INFORMATION FOR 4M1628P Overall Width (Nominal) Increase in Width 1.738" +0.020" 1.738" +0.020" 1.738" +0.020" 1.738" +0.020"

62.177/2.4479 67.071/2.6406 62.200/2.4488 67.094/2.6415 Stock not available from fee warehouses.

2.426/0.0955 .020/.0008 .091/.0036

44.65/1.758

F780

2355 U/L

* DIMENSIONAL INFORMATION FOR 4M1684P Overall Width (Nominal) Increase in Width .020" u/s shaft 1.758" +0.040" .030" u/s shaft 1.758" +0.040" .040" u/s shaft 1.758" +0.040"

4C1089S Std.

4C1351S Std.

Cam - for 1997-00 engines without ID number "T" on front of block. 1 47.452/1.8682 51.283/2.0190 1.890/0.0744 18.92/0.745 47.478/1.8692 51.333/2.0210 2,4 47.452/1.8682 51.029/2.0090 1.763/0.0694 18.92/0.745 47.478/1.8692 51.079/2.0110 3 47.452/1.8682 50.775/1.9990 1.640/0.0646 18.92/0.745 47.478/1.8692 50.825/2.0010

F23

CH-4-1

F23

CH-4-2

F23

CH-4-3

Cam - for 1997-00 engines with ID number "T" on front of block. 47.452/1.8682 51.283/2.0190 1.890/0.0744 1,4 47.478/1.8692 51.333/2.0210

19.05/0.750

F23

CH-4-1

1.640/0.0646

19.05/0.750

F23

CH-4-3

1.763/0.0694

19.05/0.750

F23

CH-4-2

CHG-15A

1BS1400S Std.

47.452/1.8682 47.478/1.8692 47.452/1.8682 47.478/1.8692

50.775/1.9990 50.825/2.0010 51.029/2.0090 51.079/2.0110

Balance Shaft - Set contains bearing & spacer (does not suit engines with roller bearings) 38.064/1.4986 47.587/1.8735 4.724/0.1860 .013/.0005 21.21/0.835 F23 Rear 38.100/1.5000 47.612/1.8745 .050/.0020

ENGINE

VIN CYL

4334cc (4.3) 4HF1 Diesel 4570cc (4.6) 4HG1 Diesel 4985cc (5.0) 4HJ1 Diesel

L4 L4 L4

Bore x Stroke 112mm x 110mm 115mm x 110mm 115mm x 120mm

TORQUE SETTINGS Connecting Rod 39 Nm + 60 deg + 30 deg Tighten in three steps

Main Bearing 132 Nm M14 Cap bolts (Step 2) Main Bearing 37 Nm M10 Crankcase bolts Main Bearing 98 Nm M14 Cap bolts (Step 1) Main Bearing : Turn 30-60 deg M14 Cap bolts (Step 3)

Rod

4B1836 Std. .25 .50 .75 1.0

65.902/2.5946 65.922/2.5953

69.985/2.7553 70.000/2.7559

2.013/0.0793 .037/.0015 .092/.0036

278

30.40/1.197

F780

1836 IH

ISUZU Type and Location

Standard Shaft Size

Max. Bearing Thickness

Housing Bore

Vertical Oil Clearance

Max. Overall Length

Material Code

Qty. Set

Bearing Shell No.

Engine Set No. Sizes Available

(Contâ&#x20AC;&#x2122;d.) Main 1-5

81.905/3.2246 81.925/3.2254

87.000/3.4252 87.019/3.4259

2.523/0.0993 .029/.0011 .088/.0035

27.25/1.073

F780

1837 U/L

5M1837 Std. .25 .50 .75

Thrust 92.700/3.6496 109.750/4.3209 92.950/3.6594 110.000/4.3307 92.700/3.6496 109.750/4.3209 92.950/3.6594 110.000/4.3307 Note: Set includes three pieces. Required with 5M1837 main set.

ENGINE

VIN CYL

Bore x Stroke

323 (5.3) 323 (5.3) 325 (5.3)

M P M

96mm x 92mm 96mm x 92mm 96mm x 92mm

V8 V8 V8

3.00/0.118

F817

3.00/0.118

F817

1837T U 1838T L

3T1837 Std.

TORQUE SETTINGS

Connecting Rod 15 ft.lbs + 60 deg. Main Bearing 15 ft.lbs + 80 deg Inner Main Bearing 18 ft.lbs Side Bolts

Rod - High Strength Aluminum Silicon material. 53.315/2.0990 56.507/2.2247 1.575/0.0620 .017/.0007 53.340/2.1000 56.520/2.2252 .081/.0032

21.25/0.837

Rod - .002" oversize OD version of 8B663A. 53.315/2.0990 56.558/2.2267 1.727/0.0680 .018/.0007 53.340/2.1000 56.571/2.2272 (@ .010" u/s) .082/.0032

21.25/0.837

F810

2376A

8B663A Std. 01 10 20 30 40

F810

9026A IH

8B663AO/S2 10 20 30 40

Rod 53.315/2.0990 53.340/2.1000

56.507/2.2247 56.520/2.2252

1.575/0.0620 .017/.0007 .081/.0032

Rod - .002" oversize OD version of 8B663P. 53.315/2.0990 56.558/2.2267 1.727/0.0680 .018/.0007 53.340/2.1000 56.571/2.2272 (@ .010" u/s) .082/.0032 Main - High Strength Aluminum Silicon material. 1,2,4,5 64.993/2.5588 69.873/2.7509 2.430/0.0957 65.007/2.5593 69.887/2.7515 3 (Fl) 64.993/2.5588 69.873/2.7509 2.430/0.0957 65.007/2.5593 69.887/2.7515

.006/.0002 .046/.0018 .002/.0001 .046/.0018

21.25/0.837

20.45/0.805

F780

F810

2376 IH 9026 IH 7298A U/L 7299A U/L

26.10/1.028

F810

Cam - for engines 2003 with first design (see position 1 & 5 housing bore). 54.991/2.1650 59.080/2.3260 2.007/0.0790 16.00/0.630 1,5 55.042/2.1670 59.131/2.3280

F23

CH-10-1

2,4

58.829/2.3161 58.879/2.3181 58.580/2.3063 58.631/2.3083

16.00/0.630

F23

CH-10-2

1.758/0.0692

16.00/0.630

F23

CH-10-3

Cam - for engines from 2003-on with second design (see position 1 & 5 housing bore). 54.991/2.1650 59.588/2.3460 2.260/0.0890 16.00/0.630 F23 1,5 55.042/2.1670 59.639/2.3480

CH-23-1

2,4

54.991/2.1650 54.042/2.1276

59.080/2.3260 59.131/2.3280

2.007/0.0790

16.00/0.630

F23

CH-10-1

54.991/2.1650 55.042/2.1670

58.580/2.3063 58.631/2.3083

1.758/0.0692

16.00/0.630

F23

CH-10-3

ENGINE 5393cc (5.4) 6BB1 Diesel 5785cc (5.8) 6BD1 Diesel 5785cc (5.8) 6BD1-T Turbo Diesel 6130cc (6.2) 6BF1 Diesel 6494cc (6.5) 6BG1 Diesel

VIN CYL L6 L6 L6 L6 L6

Bore x Stroke 102mm x 110mm 102mm x 118mm 102mm x 118mm 105mm x 118mm 105mm x 125mm

10 20 30 40

5M7298A Std. 10 20 30 40

5C1000S

5C1001S Std.

TORQUE SETTINGS

Connecting Rod 80-87 ft.lbs/108-118 Nm Main Bearing 174 ft.lbs/236 Nm

Rod - order number of pairs required per engine. 63.932/2.5170 68.000/2.6772 2.012/0.0792 .032/.0013 29.80/1.173 F780 4 1886 63.944/2.5175 68.015/2.6778 .084/.0033 IH Note: Some 6BB1 series engines have been assembled with larger diameter crankshafts as fitted to the 6BD1 series engine.Therefore please check crankshaft main journals for size before ordering main bearings.

279

8B663PO/S2

Std.

1.880/0.0740

54.991/2.1650 55.042/2.1670 54.991/2.1650 55.042/2.1670

8B663P Std. 01 10 20 30 40 50 60

2B1886 Std. .25 .50 .75 1.0 1.25 1.50

ISUZU Engine Set No. Sizes Available

Type and Location

Max. Overall Length

Material Code

Qty. Set

Bearing Shell No.

26.28/1.035

F780

1884 U/L

88.000/3.4646 101.000/3.9764 2.50/0.098 (Nominal I.D.) (Nominal O.D.) Note: Set includes four pieces, use on No. 4 position. Required with 7M1884 main sets.

F780

1889T U/L

Standard Shaft Size

Housing Bore

Max. Bearing Thickness

Vertical Oil Clearance

27 (Contâ&#x20AC;&#x2122;d.) 7M1884 Std. .25 .50 .75

2T1889 Std.

6C8081

Main - for engines from 5/80 - 1990 only. Notch width of 4.5mm. 79.913/3.1462 85.000/3.3465 2.518/0.0991 .039/.0015 1-7 79.925/3.1466 85.019/3.3472 .096/.0038 Thrust 4

Cam 1

55.945/2.2026 55.970/2.2035

60.000/2.3622 60.046/2.3640

1.995/0.0785 .040/.0016 .161/.0063

20.00/0.787

F23

8082

55.945/2.2026 55.970/2.2035

60.000/2.3622 60.046/2.3640

1.995/0.0785 .040/.0016 .161/.0063

20.00/0.787

F23

8081

Small End 34.995/1.3778 35.000/1.3780

38.000/1.4961 38.025/1.4970

38.00/1.496

F100

RB4073

Std. 2-6

RB4073 Semi

280

JAGUAR JAGUAR ENGINE INDEX Engine Disp. 151 2483cc (2.5)... 152 (2.5) ............... 152 (2.5) ............... 183 (3.0) ............... 183 (3.0) ............... 210 3442cc (3.4)... 231 3781cc (3.8)...

Notation

VIN

Mark I & II (DOHC) Duratec Duratec Duratec Duratec

Cyl. L6 V6 V6 V6 V6 L6 L6

D F

Year Line Engine Disp. 55-69 02-05 03-04 05-05 00-04 49-67 58-66

1 2 2 2 2 1 1

Notation

231 (3.8) ............... 4235cc (4.2)......... 4235cc (4.2)......... 4235cc (4.2)......... 4235cc (4.2)......... 258 4235cc (4.2)...

VIN

DOHC DOHC DOHC DOHC DOHC

2 3 N

Cyl.

Year Line

L6 L6 L6 L6 L6 L6

61-64 64-77 81-87 81-87 78-80 64-67

1 3 3 3 3 3

JAGUAR MODEL INDEX Model 2.4 3.4 3.8 3.8 - S 340 420 420 - G C-TYPE D-TYPE MARK IX MARK VII MARK VII - M MARK VIII MARK X S-TYPE VANDEN PLAS X-TYPE

Type and Location

CID

Liter

151 210 231 231 210 258 258 210 210 210 210 210 210 231 258 183

2483 3442 3781 3781 3442 4235 4235 3442 3442 3442 3442 3442 3442 3781 4235

2.5 3.4 3.8 3.8 3.4 4.2 4.2 3.4 3.4 3.4 3.4 3.4 3.4 3.8 4.2 3.0 4.2 2.5 3.0

4235 152 183

Standard Shaft Size

Description

Max. Bearing Thickness

Housing Bore

ENGINE

Years

Mark I & II (DOHC) 56-57 57-60 60-66 65-66 67 DOHC 67 DOHC 67 51-53 54-56 59-61 51-54 55-57 57-58 62-64 DOHC 64-66 Duratec 00-05 DOHC 82-87 Duratec 02-05 Duratec 02-05

VIN CYL

151 2483cc (2.5) Mark I & II (DOHC) 210 3442cc (3.4) 231 3781cc (3.8) 231 (3.8)

L6 L6 L6 L6

Model

CID

XJ XJ6 XJ6 - C XJ6 - III XJ6 - L XJ6 - SOVEREIGN XK120 XK120 - M XK140 XK140 - M XK140 - MC XK150

XKE

210 210 210 210 210 210 231 210 231 231

XKSS

258 210

XK150 - S

Vertical Oil Clearance

Max. Overall Length

Bore x Stroke

Material Code

Liter

4235 4235 4235 4235 4235 4235 3442 3442 3442 3442 3442 3442 3781 3442 3781

4.2 4.2 4.2 4.2 4.2 4.2 3.4 3.4 3.4 3.4 3.4 3.4 3.8 3.4 3.8 3.8 4.2 4.2 3.4

4235 4235 3442

Qty. Set

Description DOHC DOHC DOHC DOHC DOHC DOHC

DOHC DOHC

Bearing Shell No.

Years 69-71 72-87 75-77 81 75-80 85-87 49-54 52-54 55-57 55-57 55-57 58-61 58-61 58-61 58-61 61-64 64-71 65-67 57

Engine Set No. Sizes Available

TORQUE SETTINGS

Connecting Rod 36-38 ft.lbs/49-52 Nm Main Bearing 83 ft.lbs/113 Nm

83mm x 76mm 83mm x 106mm 87mm x 106mm 87mm x 106mm

Rod

Main 2,3,5,6 1,4,7 Thrust 4

56.718/2.2330 56.731/2.2335

1.849/0.0728 .020/.0008 .076/.0030

24.76/0.975

69.850/2.7500 69.863/2.7505

74.079/2.9165 74.092/2.9170

2.095/0.0825 .024/.0009 .076/.0030

25.40/1.000

69.850/2.7500 69.863/2.7505

74.079/2.9165 74.092/2.9170

2.090/0.0823 .024/.0009 .076/.0030

38.23/1.505

F780

2992 IH

74.422/2.9300 74.646/2.9400

91.948/3.6200 92.202/3.6300

2.36/0.093

3252T IH

Std. +.005

7696

8C7696

Cam - includes bearings for both camshafts. 25.375/0.9990 29.223/1.1505 1.911/0.0752 .014/.0006 1-8 25.387/0.9995 29.235/1.1510 .054/.0021

33.45/1.317

Small End - not bored, single pieces. 22.225/0.8750 25.387/0.9995 22.230/0.8752 25.400/1.0000

27.56/1.085

ENGINE 152 (2.5) Duratec 152 (2.5) Duratec 183 (3.0) Duratec 183 (3.0) Duratec

F780

F23

2991 IH

Std. 10 20 30 40

2997 U

Std. 10 20 30

7M2997

1T3252

Std. F100

RB875

RB875 Semi

VIN CYL D

F780

6B2991

52.984/2.0860 53.000/2.0866

V6 V6 V6 V6

Bore x Stroke

TORQUE SETTINGS

82.3mm x 79.5mm 82.3mm x 79.5mm 89mm x 79.5mm 89mm x 79.5mm

Rod - High Strength Aluminum Silicon material. 49.972/1.9674 53.015/2.0872 1.501/0.0591 .023/.0009 49.990/1.9681 53.035/2.0880 .077/.0030

281

Connecting Rod + 90 degrees Step 3 Connecting Rod 17 ft.lbs/23 Nm Step 1 Connecting Rod 32 ft.lbs/43 Nm Step 2 Main Bearing Consult Service Manual

18.00/0.709

F810

4395A

6B4395A Std. .25 .50 .75

JAGUAR Engine Set No. Sizes Available

Standard Shaft Size

Housing Bore

Max. Bearing Thickness

Vertical Oil Clearance

Max. Overall Length

Material Code

Qty. Set

Bearing Shell No.

18.00/0.709

F810

9082A IH

17.90/0.705

F810

22.30/0.878

F810

7262A U/L 7263A U/L 7263T

F100

RB4114

(Contâ&#x20AC;&#x2122;d.)

6B4395AO/S2 .25 .50 .75

4M7262A Std. .25 .50 .75

RB4114 Semi

Type and Location

Rod - .002" oversize OD version of 6B4395A. 49.972/1.9674 53.066/2.0892 1.651/0.0650 .023/.0009 49.990/1.9681 53.086/2.0900 (@0.25mm u/s) .077/.0030 Main - High Strength Aluminum Silicon material. 1,2,3 62.969/2.4791 67.998/2.6771 2.502/0.0985 62.992/2.4800 68.020/2.6779 4 (Fl) 62.969/2.4791 67.998/2.6771 2.502/0.0985 62.992/2.4800 68.020/2.6779 71.100/2.7992 93.550/3.6831 71.350/2.8090 93.800/3.6929

.020/.0008 .060/.0024 .020/.0008 .064/.0025

1.95/0.077

Small End - not bored, single pieces. 21.011/0.8272 24.030/0.9461 21.013/0.8273 24.038/0.9464

ENGINE

VIN CYL

4235cc (4.2) DOHC 4235cc (4.2) DOHC 4235cc (4.2) DOHC 4235cc (4.2) DOHC 258 4235cc (4.2) DOHC

2 3 N

L6 L6 L6 L6 L6

21.46/0.845

Bore x Stroke 92mm x 106mm 92mm x 106mm 92mm x 106mm 92mm x 106mm 92mm x 106mm

TORQUE SETTINGS Connecting Rod 36-38 ft.lbs/49-52 Nm Main Bearing 69-72 ft.lbs/94-98 Nm

Rod

6B2991 Std. 10 20 30 40

7M2996

Main 1,7

Std. 10 20 30 2,3,5,6 4

1T3252 Std. +.005

8C7696 Std.

RB875 Semi

52.984/2.0860 53.000/2.0866

56.718/2.2330 56.731/2.2335

1.849/0.0728 .020/.0008 .076/.0030

24.76/0.975

F780

2991 IH

69.850/2.7500 69.863/2.7505

74.079/2.9165 74.092/2.9170

2.096/0.0825 .024/.0009 .076/.0030

34.93/1.375

F780

2996 U/L

69.850/2.7500 69.863/2.7505 69.850/2.7500 69.863/2.7505

74.079/2.9165 74.092/2.9170 74.079/2.9165 74.092/2.9170

2.095/0.0825 .024/.0009 .076/.0030 2.096/0.0825 .024/.0009 .076/.0030

25.40/1.000

F780

28.70/1.130

F780

2997 U/L 2998 U/L

2.36/0.093

3252T IH

33.45/1.317

F23

7696

27.56/1.085

F100

RB875

Thrust 4

74.422/2.9300 91.948/3.6200 74.646/2.9400 92.202/3.6300 Note : Set includes 2 pieces, use on No. 4 position. Required with 7M2996 set.

Cam - includes bearings for both camshafts. 1-8 25.375/0.9990 29.223/1.1505 1.911/0.0752 .014/.0006 25.387/0.9995 29.235/1.1510 .054/.0021 Small End - not bored, single pieces. 22.225/0.8750 25.387/0.9995 22.230/0.8752 25.400/1.0000

282

JEEP JEEP ENGINE INDEX Engine Disp. 134 (2.2) ............... 148 (2.4) ............... 150 (2.5) ............... 150 (2.5) ............... 150 (2.5) ............... 150 (2.5) ............... 150 (2.5) ............... 151 (2.5) ............... 173 (2.8) ............... 173 (2.8) ............... 225 3687cc (3.7)... 226 (3.7) ............... 232 (3.8) ............... 232 (3.8) ............... 242 (4.0) ............... 242 (4.0) ...............

Notation

VIN

DOHC

Pontiac Eng. Chevrolet Eng.

E H P U B W W K E L M

Cyl. L4 L4 L4 L4 L4 L4 L4 L4 V6 V6 V6 V6 L6 L6 L6 L6

Year Line Engine Disp. 46-71 02-03 99-99 89-90 86-88 91-02 83-86 80-83 85-86 84-84 66-71 02-06 65-71 72-78 89-90 87-88

1 2 3 3 3 3 3 4 5 5 6 7 8 8 9 9

242 (4.0) ............... 258 (4.2) ............... 258 (4.2) ............... 258 (4.2) ............... 258 (4.2) ............... 285 (4.7) ............... 287 (4.7) ............... 304 (5.0) ............... 318 (5.2) ............... 345 (5.7) ............... 350 (5.7) ............... 360 (5.9) ............... 360 (5.9) ............... 360 (5.9) ............... 360 (5.9) ............... 401 (6.6) ...............

Notation

Dodge Trk. Eng. Hemi

Dodge Trk. Eng.

VIN

Cyl.

S A C M T N N H Y 2 9 7 N P Z Z

L6 L6 L6 L6 L6 V8 V8 V8 V8 V8 V8 V8 V8 V8 V8 V8

Year Line 91-02 72-78 77-88 88-89 89-90 02-06 99-01 71-81 93-98 05-06 69-71 89-91 71-88 73-78 98-98 74-78

9 8 8 8 8 10 10 11 12 14 13 11 11 11 12 15

JEEP MODEL INDEX Model CHEROKEE

CID

150 242 258 173 173 360 401

CHEROKEE BRIARWOOD CHEROKEE - CHIEF

242 150 242 173 CHEROKEE - CLASSIC 242 CHEROKEE COUNTRY 242 CHEROKEE - LAREDO 150 242 173 CHEROKEE - LIMITED 242 CHEROKEE PIONEER 150 242 173 CHEROKEE - S 258 360 401 CHEROKEE - SE 150 242 CHEROKEE - SPORT 242 CJ3 134 225 CJ5 134 151 232 258 225 304 CJ6 134 232 258 225 304 CJ7 150 151 232 258 304 COMANCHE 150 242 COMANCHE - CHIEF 150 242 COMANCHE CUSTOM 150 173 COMANCHE ELIMINATOR 242 COMANCHE LAREDO 150

Liter

Description

Years

2.5 4.0 4.2 2.8 2.8 Chevrolet Eng. 5.9 6.6

84-00 87-01 74-83 85-86 84 74-83 74-78

4.0 2.5 4.0 2.8 4.0

91-92 86-88 87-88 86 96

4.0 2.5 4.0 2.8 4.0

93-97 86-89 87-92 86 87-92

2.5 4.0 2.8 4.2 5.9 6.6 2.5 4.0 4.0 2.2 3.7 2.2 2.5 Pontiac Eng. 3.8 4.2 3.7 5.0 2.2 3.8 4.2 3.7 5.0 2.5 2.5 Pontiac Eng. 3.8 4.2 5.0 2.5 4.0 2.5 4.0

86-89 87-90 86 74-76 74-76 74-76 94-97 94-97 90-97 59-60 66 59-71 80-83 72-78 72-83 66-71 72-81 59-71 72-75 72-75 66-71 72-75 83-86 80-83 76-78 76-86 76-81 87-92 87-92 87-88 87-88

2.5 2.8

86 86

4.0

88-92

2.5

87-88

Model COMANCHE LAREDO COMANCHE PIONEER COMANCHE - X COMANCHE - XLS

3687

COMMANDER COMMANDER LIMITED COMMANDO DISPATCHER DJ3 DJ5

DJ6 F4 FC150 FC170 GLADIATOR GRAND CHEROKEE GRAND CHEROKEE 5.9 LIMITED GRAND CHEROKEE LAREDO

GRAND CHEROKEE LIMITED

GRAND CHEROKEE ORVIS GRAND CHEROKEE OVERLAND GRAND CHEROKEE SE GRAND CHEROKEE SPECIAL EDITION GRAND CHEROKEE TSI

283

CID

Liter

Description

Years

242

4.0

87-88

150 242 150 173 150 173 226 285

2.5 4.0 2.5 2.8 2.5 2.8 3.7 4.7

87-91 87-92 86 86 86 86 06 06

285 345 225 134 225 134 134 232 258 225 304 225 134 134 225 134 225 232 242 285 318

4.7 5.7 Hemi 3.7 2.2 3.7 2.2 2.2 3.8 4.2 3.7 5.0 3.7 2.2 2.2 3.7 2.2 3.7 3.8 4.0 4.7 5.2 Dodge Trk. Eng.

06 06 66-67 61-67 66-67 59-60 69-71 72-74 73-74 66-70 74 66-68 57-58 58-66 66 63-66 66 65-67 93-02 02 93

360

5.9 Dodge Trk. Eng.

242 226 285 287 318

4.0 3.7 4.7 4.7 5.2 Dodge Trk. Eng.

93-02 05-06 02-06 99-01 93-98

242 285 287 318 345

4.0 4.7 4.7 5.2 Dodge Trk. Eng. 5.7 Hemi

93-02 02-06 99-01 93-98 05-06

242 318

4.0 5.2 Dodge Trk. Eng.

95-97 95-97

345

5.7 Hemi

242 318

4.0 5.2 Dodge Trk. Eng.

94-95 94-95

285

4.7

318

5.2 Dodge Trk. Eng.

3687 3687

3687 3687 3687 3687

JEEP JEEP MODEL INDEX (Cont’d.) Model

CID

GRAND WAGONEER J-100 J-2500

J-2600

J-2700 J-3500 J-3600 J-3700 J-3800 J10 J20 JEEPSTER

258 318 360 232 350 232 258 304 350 360 232 258 304 350 360 232 350 232 350 232 350 232 350 232 350 258 360 401 258 360 401 134 225

3687

JEEPSTER COMMANDO

134 232 258 225 304 LIBERTY 148 LIBERTY - LIMITED 226 LIBERTY - RENEGADE 226 LIBERTY - SPORT 226 SCRAMBLER 150 151 258 UNIVERSAL 134 225

Engine Set No. Sizes Available

Type and Location

3687

Liter

Description

Years

4.2 5.2 Dodge Trk. Eng. 5.9 3.8 5.7 3.8 4.2 5.0 5.7 5.9 3.8 4.2 5.0 5.7 5.9 3.8 5.7 3.8 5.7 3.8 5.7 3.8 5.7 3.8 5.7 4.2 5.9 6.6 4.2 5.9 6.6 2.2 3.7

84-86 93 84-91 65-71 69-71 65-71 72-73 72 69-71 72-73 68-70 72-73 72 69-70 72-73 68-69 69-70 68-70 69-70 68-70 69-70 68-70 69-70 68 69-70 74-87 74-88 74-78 74-76 74-88 74-78 68-69 66-69

2.2 3.8 4.2 3.7 5.0 2.4 DOHC 3.7 3.7 3.7 2.5 2.5 Pontiac Eng. 4.2 2.2 3.7

68-71 72-73 72-73 68-71 72-73 02-03 02-06 03-06 02-06 83-85 81-83 81-85 61-67 66-67

Standard Shaft Size

ENGINE

Housing Bore

VIN CYL

134 (2.2)

Model

CID

UTILITY WAGONEER

134 150 232 242 258 173 173 360 401

WAGONEER CUSTOM

258 360 401 WAGONEER - LIMITED 150 242 173 WILLYS - 1-TON 134 WILLYS - CJ-2 134 WILLYS - CJ-3 134 WILLYS - CJ-5 134 WILLYS - CJ-6 134 WILLYS - DJ-3 134 WILLYS - JEEPSTER 134 WILLYS - PANEL 134 WILLYS - SEDAN DELIVERY 134 WRANGLER 150 242 258 WRANGLER ISLANDER 150 242 258 WRANGLER - LAREDO 150 258 WRANGLER RENEGADE 242 WRANGLER - RIO GRANDE 150 WRANGLER - S 150 242 258 WRANGLER - SAHARA 150 242 258 WRANGLER - SE 148 150 242 WRANGLER - SPORT 150 242 258 WRANGLER - X 242

Max. Bearing Thickness

Vertical Oil Clearance

Bore x Stroke 3.125 x 4.375

Max. Overall Length

Liter

Description

Years

2.2 2.5 3.8 4.0 4.2 2.8 2.8 Chevrolet Eng. 5.9 6.6

61-62 84-87 71 87 72-83 85-86 84 72-83 74-78

4.2 5.9 6.6 2.5 4.0 2.8 2.2 2.2 2.2 2.2 2.2 2.2 2.2 2.2

73 73-76 74-76 86-87 87-90 86 47-55 46-49 49-58 55-58 56-58 56-58 49-52 46-50

2.2 2.5 4.0 4.2

51-55 87-01 91-01 87-90

2.5 4.0 4.2 2.5 4.2

89-91 91-92 88-90 87-88 87-90

4.0

91-94

2.5 2.5 4.0 4.2 2.5 4.0 4.2 2.4 DOHC 2.5 4.0 2.5 4.0 4.2 4.0

95 88-94 92 88 88-91 91-02 88-90 03 94-02 94-95 87-88 97-02 87-88 02

Material Code

Qty. Set

Bearing Shell No.

TORQUE SETTINGS Connecting Rod 35-45 ft.lbs 3/8" bolts Connecting Rod 50-55 ft.lbs 7/16" bolts Main Bearing 65-75 ft.lbs

Rod

4B9955 Std. 10 20 30 40

49.213/1.9375 49.238/1.9385

51.897/2.0432 51.918/2.0440

1.328/0.0523 .020/.0008 .075/.0030

284

27.91/1.099

F23

9955 IH

JEEP Type and Location

Standard Shaft Size

Max. Bearing Thickness

Housing Bore

Vertical Oil Clearance

Max. Overall Length

Material Code

Qty. Set

Bearing Shell No.

Engine Set No. Sizes Available

(Contâ&#x20AC;&#x2122;d.) Main - full groove. 59.261/2.3331 1 (Fl) 59.286/2.3341

63.475/2.4990 63.500/2.5000

2.086/0.0821 .017/.0007 .084/.0033

48.79/1.921

63.221/2.4890 63.246/2.4900

1.963/0.0773 .009/.0004 .075/.0030

46.17/1.818

F820

9957AL U/L

59.261/2.3331 62.967/2.4790 1.836/0.0723 .009/.0004 59.286/2.3341 62.992/2.4800 .075/.0030 Overflange length increases with undersizes. See dimensional information below.

44.57/1.755

F820

9958AL U/L

59.261/2.3331 59.286/2.3341

F820

9956AL U/L

3M9958 Std. 10 20 30 40

* DIMENSIONAL INFORMATION FOR 3M9958 Overall Width (Nominal) Increase in Width .010" u/size shaft 48.89 mm +0.10 mm .020" u/size shaft 48.89 mm +0.10 mm .030" u/size shaft 48.99 mm +0.20 mm .040" u/size shaft 48.99 mm +0.20 mm Cam 55.511/2.1855 55.524/2.1860

58.839/2.3165 58.865/2.3175

1.626/0.0640 .025/.0010 .100/.0039

28.83/1.135

J-1-1

1C069S Std.

ENGINE

VIN CYL

Bore x Stroke

148 (2.4) DOHC

87.5mm x 101mm

F23

TORQUE SETTINGS

Connecting Rod 21 ft.lbs/28 Nm + 90 deg turn Main Bearing 25 ft.lbs/34 Nm (M8 Bedplate Bolts) Main Bearing 30 ft.lbs/41 Nm + 90 deg turn (M11 Main Cap Bolts)

Rod 50.007/1.9688 50.025/1.9695

52.995/2.0864 53.007/2.0869

1.483/0.0584 .004/.0002 .060/.0024

Rod - .002" oversize OD version of 4B4565P. 50.007/1.9688 53.045/2.0884 1.633/0.0643 .004/.0002 50.025/1.9695 53.057/2.0889 (@ 0.25 mm u/s) .060/.0024 Main 1,2,4,5

.018/.0007 .058/.0023 .017/.0007 .058/.0023

ENGINE 150 (2.5) 150 (2.5) 150 (2.5) 150 (2.5) 150 (2.5)

VIN CYL E H P U

L4 L4 L4 L4 L4

Bore x Stroke 3.88 x 3.19 3.88 x 3.19 3.88 x 3.19 3.88 x 3.19 3.88 x 3.19

20.13/0.793

21.62/0.851

F780

4565 IH 9096 IH 7312 IH 7313 U/L

27.86/1.097

F780

21.62/0.851

F780

9097 IH

27.86/1.097

F780

9098 U/L

4B4565P Std. .25 .50 .75 1.0

4B4565PO/S2 .25 .50 .75 1.0

5M7313P Std. .25 .50 .75

5M7313PO/S2 .25 .50 .75

TORQUE SETTINGS

Connecting Rod 33 ft.lbs/45 Nm Main Bearing 80 ft.lbs/108 Nm

Rod 53.208/2.0948 53.226/2.0955

56.083/2.2080 56.096/2.2085

1.425/0.0561 .017/.0006 .074/.0029

Main - for 1983-1990 engines only 63.470/2.4988 68.351/2.6910 2.421/0.0953 1,2,4,5 63.487/2.4995 68.377/2.6920 3 (Fl) 63.470/2.4988 68.351/2.6910 2.421/0.0953 63.487/2.4995 68.377/2.6920 Overflange length remains constant for standards and undersizes.

.022/.0008 .091/.0036 .022/.0008 .091/.0036

285

21.26/0.837

25.04/0.986 32.26/1.270

F780

F780 F780

8 2

1480 IH 8872 U/L 8873 U/L

4B960P Std. 01 10 20 30 40 50

5M1568P Std. 10 20 30

JEEP Engine Set No. Sizes Available

Type and Location

Standard Shaft Size

Housing Bore

Max. Bearing Thickness

Max. Overall Length

Material Code

Qty. Set

Bearing Shell No.

2.421/0.0953 .022/.0008 .091/.0036

25.04/0.986

F780

8874 U

2.421/0.0953 .022/.0009 .091/.0036

25.04/0.986

F780

8872 L

32.26/1.270

F780

32.26/1.270

F780

8875 U 8873 L

(Contâ&#x20AC;&#x2122;d.) 5M1948P

Std. 10 20 30

Main - for 1991-02 engines only. 63.470/2.4988 68.351/2.6910 1,3,4,5 63.487/2.4995 68.377/2.6920 1,3,4,5

63.470/2.4988 63.487/2.4995

68.351/2.6910 68.377/2.6920

2 (Fl)

63.470/2.4988 68.351/2.6910 2.421/0.0953 63.487/2.4995 68.377/2.6920 2 (Fl) 63.470/2.4988 68.351/2.6910 2.421/0.0953 63.487/2.4995 68.377/2.6920 Overflange length remains constant for standards and undersizes.

4C549S

Cam 1

Std. 2 3 4

Vertical Oil Clearance

.022/.0009 .091/.0036 .022/.0009 .091/.0036

51.549/2.0295 51.575/2.0305

54.750/2.1555 54.775/2.1565

1.580/0.0620

17.65/0.695

F23

N-7-1

51.295/2.0195 51.321/2.0205 51.041/2.0095 51.067/2.0105 50.787/1.9995 50.813/2.0005

54.496/2.1455 54.521/2.1465 54.242/2.1355 54.267/2.1365 53.988/2.1255 54.013/2.1265

1.580/0.0620

17.65/0.695

F23

N-7-2

1.580/0.0620

17.65/0.695

F23

N-7-3

1.580/0.0620

17.65/0.695

F23

N-7-4

ENGINE

VIN CYL

Bore x Stroke

151 (2.5) Pontiac Eng.

4.00 x 3.00

TORQUE SETTINGS Connecting Rod 32 ft.lbs/44 Nm Main Bearing 70 ft.lbs/95 Nm

Rod

4B610A

50.800/2.0000 50.813/2.0005

Std. 10 20 30 40

4B610AO/S2 10 20 30 40

5M1733P Std. 01 10 20 30 40

5M7152P 10 20 30 40

Std.

1.570/0.0618 .014/.0006 .066/.0026

Rod - .002" oversize OD version of 4B610A. 50.800/2.0000 54.018/2.1267 1.722/0.0678 .015/.0006 50.813/2.0005 54.031/2.1272 (@ .010" u/size) .067/.0026 Main 1,2,3,4

.007/.0003 .084/.0033 .007/.0003 .084/.0033

18.84/0.742

F810

2226A IH

18.84/0.742

F810

9070A IH

20.49/0.807

F780

25.63/1.009

F780

7132 U/L 7133 U/L

Main - Alt set to 5M1733P with +0.010" overflange length increase. * See below for dimensional information. 58.377/2.2983 63.261/2.4906 2.426/0.0955 .007/.0003 20.49/0.807 F780 8 7132 1,2,3,4 58.402/2.2993 63.287/2.4916 .084/.0033 U/L 5 (Fl) 58.377/2.2983 63.261/2.4906 2.426/0.0955 .007/.0003 25.88/1.019 F780 2 7152 58.402/2.2993 63.287/2.4916 .084/.0033 U/L Stock not available from fee warehouses.

.010" u/s shaft .020" u/s shaft .030" u/s shaft .040" u/s shaft

3C1030S

53.967/2.1247 53.980/2.1252

Cam 1,2,3

47.452/1.8682 47.478/1.8692

* DIMENSIONAL INFORMATION FOR 5M7152P Overall Width (Nominal) Increase in Width 1.019" +0.010" 1.019" +0.010" 1.019" +0.010" 1.019" +0.010"

50.775/1.9990 50.825/2.0010

1.640/0.0644

286

21.97/0.865

F23

CH-5-3

JEEP Type and Location

Standard Shaft Size

Max. Bearing Thickness

Housing Bore

Vertical Oil Clearance

ENGINE

VIN CYL

Bore x Stroke

173 (2.8) 173 (2.8) Chevrolet Eng.

W W

3.50 x 2.99 3.50 x 2.99

V6 V6

Max. Overall Length

Material Code

Qty. Set

Bearing Shell No.

Engine Set No. Sizes Available

TORQUE SETTINGS

Connecting Rod 34-40 ft.lbs/47-54 Nm Main Bearing 63-74 ft.lbs/85-101 Nm Connecting Rod 34-40 ft.lbs/46-54 Nm Main Bearing 63-74 ft.lbs/85-100 Nm

Rod 50.759/1.9984 50.785/1.9994

54.013/2.1265 54.039/2.1275

1.575/0.0620 .027/.0011 .105/.0041

Rod - .002" oversize OD version of 6B1238A. 50.759/1.9984 53.962/2.1245 1.727/0.0680 .014/.0006 50.785/1.9994 53.988/2.1255 (@ .010" u/s) .080/.0031

18.29/0.720

F810

.010" u/s shaft .020" u/s shaft .030" u/s shaft .040" u/s shaft

2.426/0.0955 .035/.0014 .109/.0043 2.426/0.0955 .035/.0014 .109/.0043 2.426/0.0955 .035/.0014 .109/.0043

18.29/0.720

F810

18.85/0.742

F780

24.18/0.952

F780

31.70/1.248

F780

24.64/0.970

2.426/0.0955 .035/.0014 .109/.0043 2.426/0.0955 .035/.0014 .109/.0043

18.85/0.742

F780

23.93/0.942

F780

63.340/2.4937 68.250/2.6870 2.426/0.0955 .035/.0014 63.363/2.4946 68.275/2.6880 .109/.0043 Overflange length remains constant for standard and undersizes.

31.70/1.248

F780

3 (Fl)

68.250/2.6870 68.275/2.6880 68.250/2.6870 68.275/2.6880

9036A IH 7117 U/L

F780

Main - for engines 1985 on with 67.2 mm large journal design. High Strength Aluminum Silicon material. 1,4 67.239/2.6472 72.149/2.8405 2.426/0.0955 .033/.0013 24.80/0.976 F810 4 67.264/2.6482 72.174/2.8415 .109/.0043

7117 U/L

4M1493P 10 20 30 40

7120 U/L

7237A U/L

72.149/2.8405 72.174/2.8415

2.426/0.0955 .033/.0013 .109/.0043

18.75/0.738

F810

7238A U/L

3 (Fl)

67.239/2.6472 67.264/2.6482

72.149/2.8405 72.174/2.8415

2.426/0.0955 .033/.0013 .109/.0043

23.93/0.942

F810

7239A U/L

Main - optional set to 4M2037P with +0.010" overflange length increase for undersizes. *See below for dimensional information. 67.239/2.6472 72.149/2.8405 2.426/0.0955 .025/.0010 24.80/0.976 F780 4 7237 1,4 67.264/2.6482 72.174/2.8415 .102/.0040 U/L 2.426/0.0955 .025/.0010 .102/.0040 2.426/0.0955 .025/.0010 .102/.0040

18.75/0.738

F780

24.18/0.952

F780

287

4M1494P Std. 10 20 30 40

7118 U/L 7119 U/L

67.239/2.6472 67.264/2.6482

67.239/2.6472 72.149/2.8405 67.264/2.6482 72.174/2.8415 3 (Fl) 67.239/2.6472 72.149/2.8405 67.264/2.6482 72.174/2.8415 To be discontinued when stock exhausted.

10 20 30 40

7118 U/L 7129 U/L 7120 U/L

6B1238AO/S2

* DIMENSIONAL INFORMATION FOR 4M1493P Overall Width (Nominal) Increase in Width 0.952" +0.010" 0.952" +0.010" 0.952" +0.010" 0.952" +0.010"

Main - For 1984-85 engines with 63.3 mm small journal design. 63.340/2.4937 68.250/2.6870 2.426/0.0955 .035/.0014 1 63.363/2.4946 68.275/2.6880 .109/.0043 63.340/2.4937 63.363/2.4946 63.340/2.4937 63.363/2.4946

6B1238A Std. 01 10 20 30 40

7116A

7238 U/L 7122 U/L

4M2037A Std. .25 .50 .75 1.0

4M7122P .25 .50 .75 1.0

JEEP Engine Set No. Sizes Available

Type and Location

Max. Overall Length

Material Code

Qty. Set

Bearing Shell No.

1.760/0.0691

16.00/0.630

F23

CH-18-1A

50.775/1.9990 50.825/2.0010

1.630/0.0640

16.13/0.635

F23

CH-18-2

51.029/2.0090 51.079/2.0110

1.760/0.0691

16.00/0.630

F23

CH-18-4

Cam - optional set to 4C1102S with 0.725" wide #2 and #3 bushes. 47.440/1.8677 51.029/2.0090 1.760/0.0691 16.00/0.630 1 47.490/1.8697 51.079/2.0110

F23

CH-18-1A

2,3

47.440/1.8677 47.490/1.8697

50.775/1.9990 50.825/2.0010

1.630/0.0640

18.42/0.725

F23

CH-18-2A

47.440/1.8677 47.490/1.8697

51.029/2.0090 51.079/2.0110

1.760/0.0691

16.00/0.630

F23

CH-18-4

Standard Shaft Size

Housing Bore

47.440/1.8677 47.490/1.8697

51.029/2.0090 51.079/2.0110

2,3

47.440/1.8677 47.490/1.8697

Vertical Oil Clearance

(Contâ&#x20AC;&#x2122;d.) 4C1102S

Cam 1

Std.

4C1102SW Std.

Max. Bearing Thickness

ENGINE

VIN CYL

225 3687cc (3.7)

Bore x Stroke 3.75 x 3.40

TORQUE SETTINGS Connecting Rod 30-40 ft.lbs/41-54 Nm Main Bearing 95-120 ft.lbs/129-162 Nm

Rod

6B610A

50.800/2.0000 50.813/2.0005

Std. 10 20 30 40

4M1688P 10 20 30

53.967/2.1247 53.980/2.1252

1.570/0.0618 .014/.0006 .066/.0026

18.84/0.742

F810

2226A IH

Main - Alt. set to 4M960P with +0.020" overflange length increase for undersizes.* See below for dimensional information. 1,3 63.475/2.4990 68.250/2.6870 2.365/0.0931 .020/.0008 22.07/0.869 F780 4 9015 63.500/2.5000 68.275/2.6880 .096/.0038 U/L 4 63.475/2.4990 68.250/2.6870 2.365/0.0931 .020/.0008 22.07/0.869 F780 1 9016 63.500/2.5000 68.275/2.6880 .096/.0038 L 4 63.475/2.4990 68.250/2.6870 2.365/0.0931 .020/.0008 22.07/0.869 F780 1 9019 63.500/2.5000 68.275/2.6880 .096/.0038 U 2 (Fl) 63.475/2.4990 68.250/2.6870 2.365/0.0931 .020/.0008 27.38/1.078 F780 2 9018 63.500/2.5000 68.275/2.6880 .096/.0038 U/L To be discontinued when stock exhausted. * DIMENSIONAL INFORMATION FOR 4M1688P Overall Width (Nominal) Increase in Width .010" u/s shaft 1.078" +0.020" .020" u/s shaft 1.078" +0.020" .030" u/s shaft 1.078" +0.020"

4M1690P 20 30

Main - Alt. set to 4M960P with +0.040" overflange length increase for undersizes.* See below for dimensional information. 63.475/2.4990 68.250/2.6870 2.365/0.0931 .020/.0008 22.07/0.869 F780 4 9015 1,3 63.500/2.5000 68.275/2.6880 .096/.0038 U/L 4

68.250/2.6870 68.275/2.6880 68.250/2.6870 68.275/2.6880

2.365/0.0931 .020/.0008 .096/.0038 2.365/0.0931 .020/.0008 .096/.0038

63.475/2.4990 68.250/2.6870 63.500/2.5000 68.275/2.6880 Stock not available from fee warehouses.

2.365/0.0931 .020/.0008 .096/.0038

4 2 (Fl)

63.475/2.4990 63.500/2.5000 63.475/2.4990 63.500/2.5000

22.07/0.869

F780

22.07/0.869

F780

27.89/1.098

F780

* DIMENSIONAL INFORMATION FOR 4M1690P Overall Width (Nominal) Increase in Width .020" u/s shaft 1.098" +0.040" .030" u/s shaft 1.098" +0.040"

288

9019 U 9016 L 9024 U/L

JEEP Type and Location

Standard Shaft Size

Max. Bearing Thickness

Housing Bore

Vertical Oil Clearance

Max. Overall Length

Material Code

Qty. Set

Bearing Shell No.

Engine Set No. Sizes Available

(Contâ&#x20AC;&#x2122;d.) Main - Alt. set to 4M960P with +0.010" overflange length increase for undersizes. *See dimensional information below. 63.475/2.4990 68.250/2.6870 2.365/0.0931 .020/.0008 22.07/0.869 F780 4 9015 1,3 63.500/2.5000 68.275/2.6880 .096/.0038 U/L 4

63.475/2.4990 63.500/2.5000

68.250/2.6870 68.275/2.6880

2.365/0.0931 .020/.0008 .096/.0038

22.07/0.869

F780

9016 L

63.475/2.4990 63.500/2.5000

68.250/2.6870 68.275/2.6880

2.365/0.0931 .020/.0008 .096/.0038

22.07/0.869

F780

9019 U

63.475/2.4990 68.250/2.6870 63.500/2.5000 68.275/2.6880 To be discontinued when stock exhausted.

2.365/0.0931 .020/.0008 .096/.0038

27.13/1.068

F780

9020 U/L

2 (Fl)

4M1747P 10 20 40

* DIMENSIONAL INFORMATION FOR 4M1747P Overall Width (Nominal) Increase in Width .010" u/s shaft 1.068" +0.010" .020" u/s shaft 1.068" +0.010" .040" u/s shaft 1.068" +0.010" Main 1,3

63.475/2.4990 68.250/2.6870 2.365/0.0931 63.500/2.5000 68.275/2.6880 4 63.475/2.4990 68.250/2.6870 2.365/0.0931 63.500/2.5000 68.275/2.6880 4 63.475/2.4990 68.250/2.6870 2.365/0.0931 63.500/2.5000 68.275/2.6880 2 (Fl) 63.475/2.4990 68.250/2.6870 2.365/0.0931 63.500/2.5000 68.275/2.6880 Overflange length remains constant for standard and undersizes. Cam 1 2 3 4

44.577/1.7550 44.602/1.7560 43.815/1.7250 43.840/1.7260 43.053/1.6950 43.078/1.6960

47.892/1.8855 47.943/1.8875 47.130/1.8555 47.181/1.8575 46.368/1.8255 46.419/1.8275

42.291/1.6650 42.316/1.6660

45.606/1.7955 45.657/1.7975

.020/.0008 .096/.0038 .020/.0008 .096/.0038 .020/.0008 .096/.0038 .020/.0008 .096/.0038

22.07/0.869

F780

9015 U/L 9016 L 9019 U 9017 U/L

22.07/0.869

F780

22.07/0.869

F780

26.87/1.058

F780

1.631/0.0642

19.18/0.755

F23

B-6-1

1.631/0.0642

19.18/0.755

F23

B-4-3

1.631/0.0642

19.18/0.755

F23

B-4-4

1.631/0.0642

19.18/0.755

F23

B-4-5

4M960P Std. 01 10 20 30 40

4C506S Std.

ENGINE

VIN CYL

Bore x Stroke

226 (3.7)

93mm x 90.8mm

TORQUE SETTINGS Connecting Rod 20 ft.lbs + 90 deg

Rod - High Strength Aluminum Silicon material. 57.897/2.2794 61.194/2.4092 1.641/0.0646 .008/.0003 57.904/2.2797 61.206/2.4097 .043/.0017

16.64/0.655

Rod - .002" oversize back version of 6B7200A. 57.897/2.2794 61.244/2.4112 1.791/0.0705 .008/.0003 57.904/2.2797 61.256/2.4116 (@ 0.25mm u/size) .043/.0017

16.64/0.655

Main - High Strength Aluminum Silicon material. 1-4 63.495/2.4998 68.395/2.6927 2.443/0.0962 .004/.0002 63.505/2.5002 68.405/2.6931 .040/.0016

20.63/0.812

Thrust 3

71.000/2.7953 91.000/3.5827 71.250/2.8051 91.250/3.5925 3 71.000/2.7953 91.000/3.5827 71.250/2.8051 91.250/3.5925 Set includes two pieces, use on No. 3 position. Required with 4M7214A main set.

F810

7200A IH 9106A IH

6B7200A Std. .25 .50

6B7200AO/S2 .25 .50 .75 1.0

4M7214A

7214A U/L

Std. .25 .50 .75 1.0

1T7214

2.54/0.100

F817

7214T

2.54/0.100

F817

7215T

Std.

289

JEEP Engine Set No. Sizes Available

Type and Location

Standard Shaft Size

ENGINE

Housing Bore

VIN CYL

232 (3.8) 232 (3.8) 258 (4.2) 258 (4.2) 258 (4.2) 258 (4.2)

E A C M T

L6 L6 L6 L6 L6 L6

Max. Bearing Thickness

Vertical Oil Clearance

Bore x Stroke

Max. Overall Length

Material Code

Qty. Set

Bearing Shell No.

TORQUE SETTINGS Connecting Rod 26-30 ft.lbs/35-41 Nm (1971-74

3.75 x 3.50 3.75 x 3.50 3.75 x 3.90 3.75 x 3.90 3.75 x 3.90 3.75 x 3.90

engines)

Connecting Rod 30-35 ft.lbs/41-48 Nm (1975-90 engines)

Connecting Rod 46-50 ft.lbs/62-68 Nm (1965-70 engines)

Main Bearing 75-85 ft.lbs/102-115 Nm Rod

6B960P

53.208/2.0948 53.226/2.0955

Std. 01 10 20 30 40

56.083/2.2080 56.096/2.2085

1.425/0.0561 .017/.0006 .074/.0029

Main 1,2,4,5, Std. 10 20 30 40 6,7 3 (Fl)

7M704P

7M8879P 10 20 30 40

Cam 1

1480 IH

25.04/0.986

F780

32.26/1.270

F780

8872 U/L 8873 U/L

* DIMENSIONAL INFORMATION FOR 7M8879P Overall Width (Nominal) Increase in Width 1.280" +0.010" 1.280" +0.010" 1.280" +0.010" 1.280" +0.010"

51.549/2.0295 51.575/2.0305

54.750/2.1555 54.775/2.1565

1.580/0.0620

17.65/0.695

F23

N-7-1

51.295/2.0195 51.321/2.0205

54.496/2.1455 54.521/2.1465

1.580/0.0620

17.65/0.695

F23

N-7-2

51.041/2.0095 51.067/2.0105

54.242/2.1355 54.267/2.1365

1.580/0.0620

17.65/0.695

F23

N-7-3

50.787/1.9995 50.813/2.0005

53.988/2.1255 54.013/2.1265

1.580/0.0620

17.65/0.695

F23

N-7-4

Std.

F780

Main - Alt set to 7M704P with +0.010" overflange length increase. * See below for dimensional information. F780 12 8872 1,2,4,5, 63.470/2.4988 68.351/2.6910 2.421/0.0953 .022/.0008 25.04/0.986 63.487/2.4995 68.377/2.6920 .091/.0036 U/L 6,7 3 (Fl) 63.470/2.4988 68.351/2.6910 2.421/0.0953 .022/.0008 32.26/1.280 F780 2 8879 63.487/2.4995 68.377/2.6920 .091/.0036 U/L Stock not available from fee warehouses.

.010" u/s shaft .020" u/s shaft .030" u/s shaft .040" u/s shaft

4C549S

.022/.0008 .091/.0036 .022/.0008 .091/.0036

21.26/0.837

ENGINE

VIN CYL

Bore x Stroke

242 (4.0) 242 (4.0) 242 (4.0)

L M S

3.875 x 3.425 3.875 x 3.425 3.875 x 3.425

L6 L6 L6

TORQUE SETTINGS Connecting Rod 40 ft.lbs/54 Nm Stage 1 Connecting Rod 70 ft.lbs/95 Nm Stage 2 Connecting Rod 80 ft.lbs/108 Nm Stage 3 Main Bearing 33 ft.lbs/45 Nm

Rod

6B960P

53.208/2.0948 53.226/2.0955

56.083/2.2080 56.096/2.2085

1.425/0.0561 .017/.0006 .074/.0029

21.26/0.837

F780

1480 IH

Main - for engines 1987-90 only. 1,2,4,5, 63.470/2.4988 68.351/2.6910 Std. 10 20 30 40 6,7 63.487/2.4995 68.377/2.6920

2.421/0.0953 .022/.0008 .091/.0036

25.04/0.986

F780

8872 U/L

63.470/2.4988 68.351/2.6910 2.421/0.0953 .022/.0008 63.487/2.4995 68.377/2.6920 .091/.0036 Overflange length remains constant for standard and undersizes.

32.26/1.270

F780

8873 U/L

Std. 01 10 20 30 40

7M704P

3 (Fl)

290

JEEP Type and Location

Standard Shaft Size

Max. Bearing Thickness

Housing Bore

Vertical Oil Clearance

Max. Overall Length

Material Code

Qty. Set

Bearing Shell No.

Engine Set No. Sizes Available

(Contâ&#x20AC;&#x2122;d.) Main - for engines 1991 on. 63.470/2.4988 68.351/2.6910 1,2,4-7 63.487/2.4995 68.377/2.6920 1,2,4-7

63.470/2.4988 63.487/2.4995

68.351/2.6910 68.377/2.6920

2.421/0.0953 .022/.0009 .091/.0036

25.04/0.986

2.421/0.0953 .022/.0009 .091/.0036

25.04/0.986

F780

8872 L

32.26/1.270

F780

32.26/1.270

F780

8873 L 8875 U

3 (Fl)

63.470/2.4988 68.351/2.6910 2.421/0.0953 63.487/2.4995 68.377/2.6920 3 (Fl) 63.470/2.4988 68.351/2.6910 2.421/0.0953 63.487/2.4995 68.377/2.6920 Overflange length remains constant for standard and undersizes.

.022/.0009 .091/.0036 .022/.0009 .091/.0036

F780

8874 U

63.470/2.4988 68.351/2.6910 63.487/2.4995 68.377/2.6920 Stock not available from fee warehouses.

.010" u/s shaft .020" u/s shaft .030" u/s shaft .040" u/s shaft Cam 1 2 3 4

2.421/0.0953 .022/.0008 .091/.0036

32.26/1.280

54.750/2.1555 54.775/2.1565

1.580/0.0620

17.65/0.695

F23

N-7-1

51.295/2.0195 51.321/2.0205 51.041/2.0095 51.067/2.0105 50.787/1.9995 50.813/2.0005

54.496/2.1455 54.521/2.1465 54.242/2.1355 54.267/2.1365 53.988/2.1255 54.013/2.1265

1.580/0.0620

17.65/0.695

F23

N-7-2

1.580/0.0620

17.65/0.695

F23

N-7-3

1.580/0.0620

17.65/0.695

F23

N-7-4

285 (4.7) 287 (4.7)

N N

3.125 x 4.375 3.125 x 4.375

V8 V8

TORQUE SETTINGS

16.64/0.655

Rod - .002" oversize back version of 8B7206A. 50.996/2.0077 53.992/2.1257 1.641/0.0646 .013/.0005 51.003/2.0080 54.005/2.1262 (@ 0.25mm u/size) .043/.0017

16.64/0.655

Rod - for engines 1999-2004 with locating tang. 50.996/2.0077 53.992/2.1257 1.491/0.0587 .013/.0005 51.003/2.0080 54.005/2.1262 .043/.0017

16.64/0.655

Rod - .002" oversize back version of 8B7210A. 50.996/2.0077 54.042/2.1276 1.641/0.0646 .013/.0005 51.003/2.0080 54.055/2.1281 (@ 0.25mm u/size) .043/.0017

16.64/0.655

71.000/2.7953 71.250/2.8051

91.000/3.5827 91.250/3.5925

2.443/0.0962 .004/.0002 .040/.0016

Connecting Rod 35-45 ft.lbs 3/8" bolts Connecting Rod 50-55 ft.lbs 7/16" bolts Main Bearing 65-75 ft.lbs

Rod - for engines 2004 on without locating tang. 50.996/2.0077 53.992/2.1257 1.491/0.0587 .013/.0005 51.003/2.0080 54.005/2.1262 .043/.0017

68.395/2.6927 68.405/2.6931

4C549S Std.

Bore x Stroke

63.495/2.4998 63.505/2.5002

7M8879P 10 20 30 40

8879 U/L

51.549/2.0295 51.575/2.0305

VIN CYL

Thrust 3

7M8874P Std. 10 20 30

* DIMENSIONAL INFORMATION FOR 7M8879P Overall Width (Nominal) Increase in Width 1.280" +0.010" 1.280" +0.010" 1.280" +0.010" 1.280" +0.010"

ENGINE

Main 1-5

F780

20.63/0.812

F810

7206A IH 9116A IH 7210A IH 9092A IH

8B7206A Std. .25 .50 .75

8B7206AO/S2 .25 .50 .75

8B7210A Std. .25 .50 .75 1.0

8B7210AO/S2 .25 .50 .75 1.0

5M7214A

7214A U/L

Std. .25 .50 .75 1.0

1T7214

2.54/0.100

F817

7214T

2.54/0.100

F817

7215T

Std.

71.000/2.7953 91.000/3.5827 71.250/2.8051 91.250/3.5925 Set contains two pieces, use on No. 3 position. Required with 5M7214A main set.

291

JEEP Engine Set No. Sizes Available

Type and Location

Standard Shaft Size

Housing Bore

Max. Bearing Thickness

Vertical Oil Clearance

ENGINE

VIN CYL

Bore x Stroke

304 (5.0) 360 (5.9) 360 (5.9) 360 (5.9)

H 7 N P

3.75 x 3.44 4.08 x 3.44 4.08 x 3.44 4.08 x 3.44

V8 V8 V8 V8

Max. Overall Length

Material Code

Qty. Set

Bearing Shell No.

TORQUE SETTINGS Connecting Rod 27-30 ft.lbs/36-41 Nm (1971-74 engines)

Connecting Rod 30-35 ft.lbs/41-48 Nm (1975-91 engines)

Main Bearing 95-105 ft.lbs/129-142 Nm Rod

8B960P

53.208/2.0948 53.226/2.0955

56.083/2.2080 56.096/2.2085

1.425/0.0561 .017/.0007 .074/.0029

21.26/0.837

F780

1480 IH

Main - full groove. 69.804/2.7482 1,2,4,5 Std. 10 20 30 40 69.822/2.7489

74.701/2.9410 74.727/2.9420

2.433/0.0958 .013/.0005 .084/.0033

23.57/0.928

F780

1482 U

23.57/0.928

F780

32.26/1.270

F780

1484 L 1483 U/L

Std. 01 10 20 30 40

5M1041P

1,2,4,5

5M1485P 10 20 30 40

.010" u/s shaft .020" u/s shaft .030" u/s shaft .040" u/s shaft

5C671S

Cam 1

Std. 2 3 4 5

.013/.0005 .084/.0033 .013/.0005 .084/.0033

* DIMENSIONAL INFORMATION FOR 5M1485P Overall Width (Nominal) Increase in Width 1.280" +0.010" 1.280" +0.010" 1.280" +0.010" 1.280" +0.010"

53.835/2.1195 53.861/2.1205

57.036/2.2455 57.061/2.2465

1.580/0.0620

23.50/0.925

F23

N-9-1

53.073/2.0895 53.099/2.0905 52.311/2.0595 52.337/2.0605

56.274/2.2155 56.299/2.2165 55.512/2.1855 55.537/2.1865

1.580/0.0620

16.00/0.630

F23

N-8-2

1.580/0.0620

16.00/0.630

F23

N-8-3

51.549/2.0295 51.575/2.0305 50.787/1.9995 50.813/2.0005

54.750/2.1555 54.775/2.1565 53.988/2.1255 54.013/2.1265

1.580/0.0620

16.00/0.630

F23

N-8-4

1.580/0.0620

16.00/0.630

F23

N-8-5

ENGINE

VIN CYL

Bore x Stroke

318 (5.2) Dodge Trk. Eng. 360 (5.9) Dodge Trk. Eng.

Y Z

3.91 x 3.31 4.00 x 3.58

V8 V8

TORQUE SETTINGS Connecting Rod 45-50 ft.lbs/61-68 Nm Main Bearing 85-90 ft.lbs/115-122 Nm

Rod

8B481P Std. 01 10 20 30 40

8B481PO/S2 10 20 30 40

53.950/2.1240 53.975/2.1250

57.150/2.2500 57.163/2.2505

1.585/0.0624 .005/.0002 .069/.0027

Rod - .002" oversize back version of 8B481P. 53.950/2.1240 57.201/2.2520 1.737/0.0684 .006/.0002 53.975/2.1250 57.214/2.2525 (@ .010" u/s) .070/.0028

292

21.52/0.847

F780

2700 IH

21.52/0.847

F780

9090 IH

JEEP Type and Location

Standard Shaft Size

Max. Bearing Thickness

Housing Bore

Vertical Oil Clearance

Max. Overall Length

Material Code

Qty. Set

Bearing Shell No.

Engine Set No. Sizes Available

(Contâ&#x20AC;&#x2122;d.) Main - for 360 engines only. 71.361/2.8095 76.264/3.0025 1,2,4 71.387/2.8105 76.276/3.0030

2.431/0.0957 .015/.0006 .079/.0031

22.28/0.877

2.431/0.0957 .015/.0006 .079/.0031

29.26/1.152

F780

2706 U/L

71.361/2.8095 76.264/3.0025 2.431/0.0957 .015/.0006 71.387/2.8105 76.276/3.0030 .079/.0031 Overflange length remains constant for standard and undersizes.

31.98/1.259

F780

2709 U/L

2.436/0.0959 .005/.0002 .069/.0027

22.27/0.877

F780

4352 U/L

2.436/0.0959 .025/.0010 .089/.0035

29.26/1.152

F780

2703 U

29.26/1.152

F780

33.70/1.327

F780

4357 L 4354 U/L

3 (Fl)

71.361/2.8095 71.387/2.8105

76.264/3.0025 76.276/3.0030

Main - for 318 engines only. 1,2,4 63.487/2.4995 68.390/2.6925 63.513/2.5005 68.402/2.6930 3 (Fl)

63.487/2.4995 63.513/2.5005

68.390/2.6925 68.402/2.6930

3 (Fl)

.025/.0010 .089/.0035 .005/.0002 .069/.0027

F780

Main - Alt set to 5M1266P with 0.010" overwidth flange increase. * See below for dimensional information. 71.361/2.8095 76.264/3.0025 2.558/0.1007 .015/.0006 22.28/0.877 F780 6 1,2,4 71.387/2.8105 76.276/3.0030 (@ .010" u/s) .079/.0031 3 (Fl)

71.361/2.8095 76.264/3.0025 71.387/2.8105 76.276/3.0030 5 71.361/2.8095 76.264/3.0025 71.387/2.8105 76.276/3.0030 Stock not available from fee warehouses.

.010" u/s shaft .020" u/s shaft .030" u/s shaft .040" u/s shaft Cam 1 2 3 4 5

2.558/0.1007 (@ .010" u/s) 2.558/0.1007 (@ .010" u/s)

.015/.0006 .079/.0031 .015/.0006 .079/.0031

29.52/1.162

F780

31.98/1.259

F780

2705 IH

5M1266P Std. 01 10 20 30

5M1344P Std. 01 10 20 30 40

5M2715P 10 20 30 40

2715 U/L 2709 U/L

* DIMENSIONAL INFORMATION FOR 5M2715P Overall Width (Nominal) Increase in Width 1.162" +0.010" 1.162" +0.010" 1.162" +0.010" 1.162" +0.010"

50.750/1.9980 50.775/1.9990

54.090/2.1295 54.115/2.1305

1.638/0.0645

22.35/0.880

F23

PD-16-1

50.343/1.9820 50.368/1.9830 49.962/1.9670 49.987/1.9680 49.555/1.9510 49.581/1.9520

53.683/2.1135 53.708/2.1145 53.302/2.0985 53.327/2.0995 52.895/2.0825 52.921/2.0835

1.638/0.0645

16.00/0.630

F23

PD-25-2

1.638/0.0645

15.75/0.620

F23

PD-25-3

1.638/0.0645

15.75/0.620

F23

PD-25-4

39.637/1.5605 39.662/1.5615

42.977/1.6920 43.002/1.6930

1.638/0.0645

24.00/0.945

F23

PD-9-5

5C1112S Std.

ENGINE

VIN CYL

Bore x Stroke

350 (5.7)

3.80 x 3.85

TORQUE SETTINGS

Connecting Rod 35 ft.lbs/48 Nm Main Bearing 95 ft.lbs/129 Nm

Rod - .002" oversize OD version of 8B610A (2 sets required per engine). 50.800/2.0000 54.018/2.1267 1.722/0.0678 .015/.0006 18.84/0.742 50.813/2.0005 54.031/2.1272 (@ .010" u/size) .067/.0026

F810

Rod - High Strength Aluminum Silicon material. 50.800/2.0000 53.967/2.1247 1.570/0.0618 .014/.0006 50.813/2.0005 53.980/2.1252 .066/.0026

F810

293

18.84/0.742

9070A IH 2226A IH

4B610AO/S2 10 20 30 40

8B610A Std. 10 20 30 40

JEEP Engine Set No. Sizes Available

Type and Location

Max. Overall Length

Material Code

Qty. Set

Bearing Shell No.

Main - half groove, standard oil clearance. 76.187/2.9995 80.975/3.1880 2.370/0.0935 .020/.0008 1,2,4 76.213/3.0005 81.001/3.1890 .097/.0038

22.10/0.870

F780

7134 U/L

3 (Fl)

2.370/0.0935 .020/.0008 .097/.0038

26.87/1.058

F780

7135 U/L

76.187/2.9995 80.975/3.1880 2.370/0.0935 .020/.0008 76.213/3.0005 81.001/3.1890 .097/.0038 Overflange length remains constant for standard and undersizes.

22.10/0.870

F780

7137 U/L

Standard Shaft Size

Housing Bore

Max. Bearing Thickness

Vertical Oil Clearance

13 (Contâ&#x20AC;&#x2122;d.) 5M1457P Std. 10 20 30

76.187/2.9995 76.213/3.0005

80.975/3.1880 81.001/3.1890

5C680S

Cam 1

Std. 2-5

48.654/1.9155 48.705/1.9175

1.630/0.0642

19.18/0.755

F23

B-11-1

45.339/1.7850 45.364/1.7860

48.654/1.9155 48.705/1.9175

1.630/0.0642

15.88/0.625

F23

B-9-2

ENGINE

VIN CYL

Bore x Stroke

345 (5.7) Hemi

99.5mm x 90.8mm

8B1808A Std. .25 .50

8B1808AO/S2 .25 .50 .75

5M2220A Std. .25 .50

1T611S Std.

45.339/1.7850 45.364/1.7860

TORQUE SETTINGS Connecting Rod 15 ft.lbs + 90 deg Main Bearing 20 ft.lbs + 90 deg M12 bolts Main Bearing 21 ft.lbs M8 crossbolts

Rod - High Strength Aluminum Silicon material. 53.993/2.1257 57.206/2.2522 1.590/0.0626 .018/.0007 54.008/2.1263 57.219/2.2527 .062/.0024

20.10/0.791

F810

7211A IH

Rod - .002" oversize OD version of 8B1808A. 53.993/2.1257 57.257/2.2542 1.740/0.0685 .018/.0007 54.008/2.1263 57.270/2.2547 (@0.25mm u/s) .082/.0032

20.10/0.791

F810

9112A IH

Main - High Strength Aluminum Silicon material. 64.996/2.5589 69.893/2.7517 2.439/0.0960 .010/.0004 1-5 65.004/2.5592 69.906/2.7522 .048/.0019

21.60/0.850

F810

7216A U/L

MB3780W U

Thrust 3

72.644/2.8600 93.370/3.6760 2.586/0.1018 (OD) (ID) 73.152/2.8800 Set includes two pieces, use on No. 3 position. required with 5M2220A main set.

ENGINE

VIN CYL

Bore x Stroke

401 (6.6)

4.165 x 3.680

TORQUE SETTINGS Connecting Rod 35-40 ft.lbs/47-54 Nm Main Bearing 95-100 ft.lbs/129-136 Nm

Rod

8B819P

57.094/2.2478 57.112/2.2485

60.312/2.3745 60.325/2.3750

1.582/0.0623 .048/.0019 .104/.0041

20.45/0.805

F780

CB819P IH

Main - full groove. 69.804/2.7482 1,2,4,5 Std. 10 20 30 40 69.822/2.7489

74.701/2.9410 74.727/2.9420

2.433/0.0958 .013/.0005 .084/.0033

23.57/0.928

F780

1482 U

74.701/2.9410 74.727/2.9420

2.433/0.0958 .013/.0005 .084/.0033

23.57/0.928

F780

1484 L

69.804/2.7482 74.701/2.9410 2.433/0.0958 .013/.0005 69.822/2.7489 74.727/2.9420 .084/.0033 Overflange length remains constant for standard and undersizes.

32.26/1.270

F780

1483 U/L

Std. 10 20

5M1041P

1,2,4,5

69.804/2.7482 69.822/2.7489

3 (Fl)

294

JEEP Type and Location

Standard Shaft Size

Housing Bore

Max. Bearing Thickness

Vertical Oil Clearance

Max. Overall Length

Material Code

Qty. Set

Bearing Shell No.

Engine Set No. Sizes Available

69.804/2.7482 69.822/2.7489

74.701/2.9410 74.727/2.9420

2.433/0.0958 .013/.0005 .084/.0033

23.57/0.928

F780

1484 L

69.804/2.7482 74.701/2.9410 69.822/2.7489 74.727/2.9420 Stock not available from fee warehouses.

2.433/0.0958 .013/.0005 .084/.0033

32.51/1.280

F780

1485 U/L

3 (Fl)

.010" u/s shaft .020" u/s shaft .030" u/s shaft .040" u/s shaft Cam 1 2 3 4 5

5M1485P 10 20 30 40

* DIMENSIONAL INFORMATION FOR 5M1485P Overall Width (Nominal) Increase in Width 1.280" +0.010" 1.280" +0.010" 1.280" +0.010" 1.280" +0.010"

53.835/2.1195 53.861/2.1205

57.036/2.2455 57.061/2.2465

1.580/0.0620

23.50/0.925

F23

N-9-1

53.073/2.0895 53.099/2.0905 52.311/2.0595 52.337/2.0605 51.549/2.0295 51.575/2.0305 50.787/1.9995 50.813/2.0005

56.274/2.2155 56.299/2.2165 55.512/2.1855 55.537/2.1865 54.750/2.1555 54.775/2.1565 53.988/2.1255 54.013/2.1265

1.580/0.0620

16.00/0.630

F23

N-8-2

1.580/0.0620

16.00/0.630

F23

N-8-3

1.580/0.0620

16.00/0.630

F23

N-8-4

1.580/0.0620

16.00/0.630

F23

N-8-5

5C671S Std.

295

KIA KIA ENGINE INDEX Engine Disp.

Notation

1493cc (1.5)......... 1597cc (1.6)......... 1597cc (1.6)......... 1597cc (1.6)......... 1839cc (1.8)......... 1975cc (2.0).........

16V DOHC (A5D) SOHC (Mazda B6) DOHC (Mazda B6) DOHC (Mazda B6) DOHC (Mazda BP) Hyundai G4GF

VIN

Cyl.

1 3 4 5

L4 L4 L4 L4 L4 L4

Year Line Engine Disp. 01-02 94-95 95-97 96-97 95-98 04-04

1 2 2 2 3 5

1998cc (2.0)......... 1998cc (2.0)......... 1998cc (2.0)......... 2351cc (2.4)......... 2351cc (2.4).........

Notation

VIN

Cyl.

DOHC DOHC DOHC (3FE) Hyundai G4JS Hyundai G4JS

1 3 3

L4 L4 L4 L4 L4

Year Line 95-95 95-98 99-02 05-06 01-04

4 4 4 6 6

KIA MODEL INDEX Model

CID

MAGENTIS OPTIMA OPTIMA - EX OPTIMA - LX RIO RIO - CINCO RIO - RX-V SEPHIA - GS

Engine Set No. Sizes Available

Type and Location

Liter

Description

2351 2351 2351 2351 1493 1493 1493 1597 1597 1839

2.4 2.4 2.4 2.4 1.5 1.5 1.5 1.6 1.6 1.8

Hyundai G4JS Hyundai G4JS Hyundai G4JS Hyundai G4JS 16V DOHC (A5D) 16V DOHC (A5D) 16V DOHC (A5D) DOHC (Mazda B6) SOHC (Mazda B6) DOHC (Mazda BP)

Standard Shaft Size

ENGINE

VIN CYL

Std. .25 .50 .75 1.0

5M8353

Main 1-5 1-5

Std.

49.938/1.9661 49.956/1.9668 49.938/1.9661 49.956/1.9668

SPECTRA - EX SPECTRA - LX SPORTAGE SPORTAGE - 4X2 4-DOOR Vertical Oil Clearance

75.5mm x 83.4mm

53.998/2.1259 54.018/2.1267 53.998/2.1259 54.018/2.1267

CID

SEPHIA - RS

Bore x Stroke

Rod - No oil holes in bearing. 39.939/1.5724 43.000/1.6929 39.954/1.5730 43.019/1.6937

Std. .25 .50 .75 1.0

1T8353

Model SEPHIA - LS

Max. Bearing Thickness

Housing Bore

1493cc (1.5) 16V DOHC (A5D)

4B8150

Years 01-04 01-04 05-06 05-06 01-02 02 01-02 95-96 94-95 95-97

Liter

Description

1.6 1.6 1.8 1.6 1.6 1.8 2.0 2.0 2.0

DOHC (Mazda B6) SOHC (Mazda B6) DOHC (Mazda BP) DOHC (Mazda B6) SOHC (Mazda B6) DOHC (Mazda BP) Hyundai G4GF Hyundai G4GF DOHC

1998

2.0 DOHC

Max. Overall Length

Material Code

Years 95-97 94-95 95-97 95-97 94-95 96-97 04 04 95-02 95-97

Qty. Set

Bearing Shell No.

TORQUE SETTINGS Connecting Rod 47-51 ft.lbs/63-69 Nm Main Bearing 40-43 ft.lbs/54-58 Nm

1.515/0.0596 .016/.0006 .076/.0030

17.00/0.669

F780

8150 IH

2.010/0.0791 .022/.0009 .076/.0030 2.013/0.0793 .022/.0009 .076/.0030

17.50/0.689

F810

17.50/0.689

F810

8354A U 8353A L

2.55/0.100

F250

Thrust 4

57.100/2.2480 68.830/2.7098 (Nominal I.D.) (Nominal O.D.) Note: Set includes two pieces, use on No. 4 position. Required with 5M8353 main set.

ENGINE

VIN CYL

Bore x Stroke

1597cc (1.6) SOHC (Mazda B6) 1597cc (1.6) DOHC (Mazda B6) 1597cc (1.6) DOHC (Mazda B6)

1 3 4

78mm x 84mm 78mm x 84mm 78mm x 84mm

L4 L4 L4

cc 1597 1597 1839 1597 1597 1839 1975 1975 1998

8353T IH

TORQUE SETTINGS Connecting Rod 35-38 ft.lbs/47-52 Nm (SOHC) Connecting Rod 37-40 ft.lbs/50-54 Nm (DOHC) Main Bearing 40-43 ft.lbs/54-58 Nm (All engines)

Rod

4B8351 Std. .25 .50 .75 1.0

5M8353

Main 1-5

Std. .25 .50 .75 1.0 1-5

1T8353 Std.

RB4108 Semi

44.940/1.7693 44.956/1.7699

47.996/1.8896 48.016/1.8904

1.510/0.0594 .020/.0008 .071/.0028

17.00/0.669

F810

8351A IH

49.938/1.9661 49.956/1.9668 49.938/1.9661 49.956/1.9668

53.998/2.1259 54.018/2.1267 53.998/2.1259 54.018/2.1267

2.010/0.0791 .022/.0009 .076/.0030 2.013/0.0793 .022/.0009 .076/.0030

17.50/0.689

F810

17.50/0.689

F810

8354A U 8353A L

2.55/0.100

F250

8353T IH

21.80/0.858

F100

RB4108

Thrust 4

57.100/2.2480 68.830/2.7098 (Nominal I.D.) (Nominal O.D.) Note: Set includes two pieces, use on No. 4 position. Required with 5M8353 main set. Small End - for 1.6L DOHC engines only. 19.993/0.7871 23.000/0.9055 (Nominal) (Nominal)

296

KIA Type and Location

Standard Shaft Size

Max. Bearing Thickness

Housing Bore

Vertical Oil Clearance

ENGINE

VIN CYL

Bore x Stroke

1839cc (1.8) DOHC (Mazda BP)

83mm x 85mm

Max. Overall Length

Material Code

Qty. Set

Bearing Shell No.

Engine Set No. Sizes Available

TORQUE SETTINGS

Connecting Rod 37-40 ft.lbs/50-54 Nm Main Bearing 40-43 ft.lbs/54-58 Nm

Rod

Main 1-5 1-5

44.940/1.7693 44.956/1.7699

47.996/1.8896 48.016/1.8904

1.510/0.0594 .020/.0008 .071/.0028

17.00/0.669

49.938/1.9661 49.956/1.9668 49.938/1.9661 49.956/1.9668

53.998/2.1259 54.018/2.1267 53.998/2.1259 54.018/2.1267

2.010/0.0791 .022/.0009 .076/.0030 2.013/0.0793 .022/.0009 .076/.0030

17.50/0.689

Thrust 4

57.100/2.2480 68.830/2.7098 (Nominal I.D.) (Nominal O.D.) Note: Set includes two pieces, use on No. 4 position. Required with 5M8353 main set.

F810

17.50/0.689

F810

2.55/0.100

F250

8351A IH 8354A U 8353A L

4B8351 Std. .25 .50 .75 1.0

5M8353 Std. .25 .50 .75 1.0

8353T IH

1T8353

RB4108

Std.

Small End 19.993/0.7871 (Nominal)

23.000/0.9055 (Nominal)

21.80/0.858

F100

Semi

ENGINE

VIN CYL

Bore x Stroke

1998cc (2.0) DOHC 1998cc (2.0) DOHC 1998cc (2.0) DOHC (3FE)

1 3 3

86mm x 86mm 86mm x 86mm 86mm x 86mm

L4 L4 L4

TORQUE SETTINGS

Connecting Rod 37-41 ft.lbs/50-55 Nm Main Bearing 61-68 ft.lbs/82-92 Nm

Rod 50.940/2.0055 50.955/2.0061

54.002/2.1261 54.027/2.1270

1.510/0.0594

59.940/2.3598 59.955/2.3604

64.000/2.5197 64.019/2.5204

2.014/0.0793 .017/.0007 .071/.0028

19.13/0.753

59.940/2.3598 59.955/2.3604 Check for availability.

64.000/2.5197 64.019/2.5204

2.014/0.0793 .017/.0007 .071/.0028

19.13/0.753

F810

8134A U

2.05/0.081

F250

2134T U/L

Main 1-5 1-5

21.13/0.832

Thrust 3

68.800/2.7087 84.250/3.3169 (Nominal I.D.) (Nominal O.D.) Note : Set includes four pieces. Required with 5M8142 main set.

ENGINE

VIN CYL

1975cc (2.0) Hyundai G4GF

Bore x Stroke

F780

F810

4B8140

8140 IH

Std. .25 .50 .75 1.0

8133A L

Std. .25 .50 .75

5M8142

2T2134 Std.

TORQUE SETTINGS

82mm x 93.5mm

Connecting Rod 37-39 ft.lbs/50-53 Nm (Tighten evenly in two or three steps)

Main Bearing 20-24 ft.lbs/27-33 Nm + 60 deg turn Rod

Main 1,2,4,5 3

44.975/1.7707 44.990/1.7713

48.003/1.8899 48.016/1.8904

1.498/0.0590 .017/.0007 .061/.0024

21.00/0.827

F780

56.977/2.2432 56.992/2.2438

61.000/2.4016 61.020/2.4024

1.994/0.0785 .020/.0008 .071/.0028

21.00/0.827

56.977/2.2432 56.992/2.2438

61.000/2.4016 61.020/2.4024

1.994/0.0785 .020/.0008 .071/.0028

21.00/0.827

F780

1205 IH

2.47/0.097

F817

1204T IH

F780

4B1206

1206 IH

Std. .25 .50 .75 1.0

1204 U/L

Std. .25 .50

5M1204

Thrust 63.000/2.4803 84.500/3.3268 63.250/2.4902 84.750/3.3366 Set includes 2 pieces. Required with 5M1204 main set.

297

1T1204 Std.

KIA Engine Set No. Sizes Available

Type and Location

Standard Shaft Size

ENGINE

Housing Bore

VIN CYL

2351cc (2.4) Hyundai G4JS 2351cc (2.4) Hyundai G4JS

L4 L4

Max. Bearing Thickness

Vertical Oil Clearance

Bore x Stroke 86.5mm x 100mm 86.5mm x 100mm

Max. Overall Length

Material Code

Qty. Set

Bearing Shell No.

TORQUE SETTINGS Connecting Rod 13-16 ft.lbs + 90 deg Main Bearing 18 ft.lbs + 90 deg

Rod

4B1185 Std. .25 .50 .75 1.0

5M1219

Main 1-5

Std. .25 .50 .75 1.0

44.981/1.7709 44.996/1.7715

47.998/1.8897 48.019/1.8905

1.493/0.0588 .016/.0006 .078/.0031

21.10/0.831

F810

1185A IH

56.985/2.2435 57.000/2.2441

61.000/2.4016 61.021/2.4024

1.990/0.0783 .020/.0008 .082/.0032

21.00/0.827

F810

1186A U/L

63.100/2.4842 63.350/2.4941 (I.D.)

80.500/3.1693 80.750/3.1791 (O.D.)

2.11/0.083

F250

1219T IH

Thrust

1T1219 Std.

298

LEXUS LEXUS ENGINE INDEX Engine Disp. 2508cc (2.5)......... 2959cc (3.0)......... 2959cc (3.0)......... 2995cc (3.0)......... 2995cc (3.0)......... 2995cc (3.0)......... 2997cc (3.0)......... 2997cc (3.0).........

Notation

VIN

Cyl.

(2VZFE) (1MZFE) (3VZFE) (1MZFE) (1MZFE) (1MZFE) (2JZGE) (2JZGE)

V F V

V6 V6 V6 V6 V6 V6 L6 L6

F G D

Year Line Engine Disp.

Notation

VIN

Cyl.

90-91 96-98 92-93 99-03 99-99 94-95 99-05 96-98

(2JZGE) (1UZFE) (1UZFE) (1UZFE) (3UZFE) (1FZFE) (2UZFE)

J U

L6 V8 V8 V8 V8 L6 V8

1 3 2 3 3 3 4 4

2997cc (3.0)......... 3967cc (4.0)......... 3969cc (4.0)......... 3969cc (4.0)......... 4293cc (4.3)......... 4477cc (4.5)......... 285 4663cc (4.7)...

H J

Year Line 92-95 90-95 99-00 96-98 01-06 96-97 98-06

4 5 5 5 7 6 5

LEXUS MODEL INDEX Model

CID

ES250 ES300 GS300 GS400 GS430 GX470 IS300 IS300 - SPORTCROSS LS400 Type and Location

285

Standard Shaft Size

Liter

2508 2959 2995 2997 3969 4293 4663 2997 2997 3967

2.5 3.0 3.0 3.0 4.0 4.3 4.7 3.0 3.0 4.0

Description

Years 90-91 92-98 94-03 93-05 98-00 01-06 03-06 01-05 02-04 90-95

Max. Bearing Thickness

Housing Bore

Model

285

SC430

Vertical Oil Clearance

Max. Overall Length

ENGINE

VIN CYL

Bore x Stroke

2508cc (2.5) (2VZFE)

87.5mm x 69.5mm

CID

LS400 LS430 LX450 LX470 RX300 SC300 SC400

Material Code

Liter

3969 4293 4477 4663 2995 2997 3967 3969 4293

4.0 4.3 4.5 4.7 3.0 3.0 4.0 4.0 4.3

Qty. Set

Description

Years 96-00 01-06 96-97 98-06 99-03 92-00 92-95 96-00 02-06

Bearing Shell No.

Engine Set No. Sizes Available

TORQUE SETTINGS

Connecting Rod 18ft.lbs + 90 deg turn Main Bearing 45ft.lbs + 90 deg turn

Rod

Main 2,3,4 1

47.986/1.8892 48.000/1.8898

51.000/2.0079 51.024/2.0088

1.488/0.0586 .024/.0009 .089/.0035

17.00/0.669

63.985/2.5191 64.000/2.5197 63.985/2.5191 64.000/2.5197

68.010/2.6776 68.028/2.6783 68.010/2.6776 68.028/2.6783

1.990/0.0783 .030/.0012 .089/.0035 1.990/0.0783 .030/.0012 .089/.0035

20.00/0.787

Thrust 2

71.250/2.8051 86.250/3.3957 71.500/2.8150 86.500/3.4055 Note: Set includes four pieces, use on No.2 position. Required with 4M8063 main set.

F810

22.00/0.866

F810

2.49/0.098

F817

ENGINE

VIN CYL

Bore x Stroke

2959cc (3.0) (3VZFE)

87.5mm x 82mm

F780

8040 IH 8063A U/L 8064A U/L 8063T U/L

6B8040 Std. .25 .50

4M8063A Std. .25 .50 .75 1.0

2T8063 Std. +.25

TORQUE SETTINGS

Connecting Rod 18ft.lbs + 90 deg turn Main Bearing 45ft.lbs + 90 deg turn

Rod

Main 2,3,4 1

54.987/2.1649 55.000/2.1654

58.000/2.2835 58.024/2.2844

1.488/0.0586 .024/.0009 .087/.0034

17.00/0.669

63.985/2.5191 64.000/2.5197

68.010/2.6776 68.028/2.6783

1.990/0.0783 .030/.0012 .089/.0035

20.00/0.787

63.985/2.5191 64.000/2.5197

68.010/2.6776 68.028/2.6783

1.990/0.0783 .030/.0012 .089/.0035

22.00/0.866

F810

8064A U/L

2.49/0.098

F817

8063T U/L

Thrust 2

71.250/2.8051 86.250/3.3957 71.500/2.8150 86.500/3.4055 Note: Set includes four pieces. Required with 4M8063 main set.

299

F780

F810

6B8061

8061 IH

Std. .25 .50 .75 1.0

8063A U/L

Std. .25 .50 .75 1.0

4M8063A

2T8063 Std. +.25

LEXUS Engine Set No. Sizes Available

Type and Location

Standard Shaft Size

Housing Bore

Max. Bearing Thickness

Vertical Oil Clearance

ENGINE

VIN CYL

Bore x Stroke

2959cc (3.0) (1MZFE) 2995cc (3.0) (1MZFE) 2995cc (3.0) (1MZFE) 2995cc (3.0) (1MZFE)

87.5mm x 83mm 87.5mm x 83mm 87.5mm x 83mm 87.5mm x 83mm

F G

V6 V6 V6 V6

Max. Overall Length

Material Code

Qty. Set

Bearing Shell No.

TORQUE SETTINGS Connecting Rod 18ft.lbs + 90 deg turn Main Bearing Consult Service Manual

Rod

6B8381 Std. .25 .50 .75 1.0

4M8379

Main 2,3

Std. .25 .50 .75 1,4

52.992/2.0863 53.000/2.0866

56.000/2.2047 56.020/2.2055

1.484/0.0584 .032/.0013 .080/.0031

16.00/0.630

F780

8381 IH

60.988/2.4011 61.000/2.4016 60.988/2.4011 61.000/2.4016

66.000/2.5984 66.020/2.5992 66.000/2.5984 66.020/2.5992

2.486/0.0979 .028/.0011 .080/.0031 2.486/0.0979 .028/.0011 .080/.0031

19.00/0.748

F780

22.50/0.886

F780

8379 U/L 8383 U/L

1.98/0.078

F817

Thrust

2T8379 Std.

68.200/2.6850 83.950/3.3051 68.450/2.6949 83.700/3.2953 Note: Set includes four pieces. Required with 4M8379 main set.

ENGINE

VIN CYL

2997cc (3.0) (2JZGE) 2997cc (3.0) (2JZGE) 2997cc (3.0) (2JZGE)

D J

L6 L6 L6

Bore x Stroke 86.1mm x 86.1mm 86.1mm x 86.1mm 86.1mm x 86.1mm

8379T U/L

TORQUE SETTINGS Connecting Rod 22 ft.lbs + 90 deg turn Main Bearing 33 ft.lbs + 90 deg

Rod

6B8100

51.982/2.0465 52.000/2.0472

55.024/2.1663 55.042/2.1670

1.511/0.0595 .002/.0001 .065/.0026

19.30/0.760

F780

8100 IH

Rod - Race Series. 51.981/2.0465 52.000/2.0472

55.024/2.1663 55.042/2.1670

1.506/0.0593 .012/.0005 .065/.0026

19.30/0.760

F781

8100H IH

Std. .25

6B8100H Std. .025 .25

6B8100HX Std.

7M8103

Rod - Race Series. Bearings are .0005" thinner per half to give .001" extra clearance on standard sized crankshafts. 51.981/2.0465 55.024/2.1663 1.493/0.0588 .037/.0015 19.30/0.760 F781 12 8100HX 52.000/2.0472 55.042/2.1670 .091/.0036 IH Main 2-7

61.984/2.4403 62.001/2.4410 61.984/2.4403 62.001/2.4410

66.020/2.5992 66.035/2.5998 66.020/2.5992 66.035/2.5998

2.009/0.0791 .004/.0002 .059/.0023 2.009/0.0791 .004/.0002 .059/.0023

20.00/0.787

F780

23.00/0.906

F780

Main - Race Series. 61.984/2.4403 2-7 62.001/2.4410

66.020/2.5992 66.035/2.5998

2.004/0.0789 .011/.0004 .059/.0023

20.00/0.787

F780

8103H U/L

66.020/2.5992 66.035/2.5998

2.004/0.0789 .011/.0004 .059/.0023

23.00/0.906

F780

8104H U/L

Std. .25 1

7M8103H Std. .025 .25

7M8103HX Std.

Main - Race Series. Bearings are .0005" thinner per half to give .001" extra clearance on standard sized crankshafts. 61.984/2.4403 66.020/2.5992 1.991/0.0784 .036/.0014 20.00/0.787 F780 12 8103HX 2-7 62.001/2.4410 66.035/2.5998 .084/.0033 U/L 1

2T8103 Std.

61.984/2.4403 62.001/2.4410

8103 U/L 8104 U/L

61.984/2.4403 62.001/2.4410

66.020/2.5992 66.035/2.5998

1.991/0.0784 .036/.0014 .084/.0033

23.00/0.906

F780

8104HX U/L

67.350/2.6516 81.350/3.2027 1.97/0.078 67.600/2.6614 81.600/3.2126 Note : Set includes four pieces, use on No.3 position. Required with 7M8103/H/HX main set.

F817

8103T U/L

Thrust 3

ENGINE

VIN CYL

Bore x Stroke

3967cc (4.0) (1UZFE) 3969cc (4.0) (1UZFE) 3969cc (4.0) (1UZFE) 285 4663cc (4.7) (2UZFE)

87.5mm x 82.5mm 87.5mm x 82.5mm 87.5mm x 82.5mm 94mm x 84.7mm

V8 V8 V8 V8

TORQUE SETTINGS Connecting Rod 18 ft.lbs + 90 deg turn Main Bearing 20 ft.lbs + 90 deg (1UZFE - Nuts & 2UZFE)

Main Bearing 36 ft.lbs (1UZFE Bolts only)

Rod

8B8091 Std. .25 .50

51.981/2.0465 52.000/2.0472

55.000/2.1654 55.024/2.1663

1.496/0.0589 .010/.0004 .077/.0030

300

19.50/0.768

F780

8091 IH

LEXUS Type and Location

Standard Shaft Size

Max. Bearing Thickness

Housing Bore

Vertical Oil Clearance

Max. Overall Length

Material Code

Qty. Set

Bearing Shell No.

Engine Set No. Sizes Available

(Contâ&#x20AC;&#x2122;d.) Rod - Race Series. 51.981/2.0465 51.999/2.0472

55.001/2.1654 55.024/2.1663

1.496/0.0589 .010/.0004 .067/.0026

19.50/0.768

F781

8091H IH

Rod - Race Series. Bearings are .0005" thinner per half to give .001" extra clearance on standard sized crankshafts. 51.981/2.0465 55.001/2.1654 1.483/0.0584 .035/.0014 19.50/0.768 F781 16 8091HX 51.999/2.0472 55.024/2.1663 .092/.0036 IH Main 1,5

66.987/2.6373 67.000/2.6378

71.999/2.8346 72.014/2.8352

2.496/0.0983 .007/.0003 .061/.0024

22.50/0.886

66.987/2.6373 67.000/2.6378

71.999/2.8346 72.014/2.8352

2.496/0.0983 .007/.0003 .061/.0024

19.50/0.768

F780

8093 U/L

Main - Race Series. 1,5 66.987/2.6373 67.000/2.6378 2,3,4 66.987/2.6373 67.000/2.6378

71.999/2.8346 72.014/2.8352 71.999/2.8346 72.014/2.8352

2.491/0.0981 .017/.0007 .061/.0024 2.491/0.0981 .017/.0007 .061/.0024

22.50/0.886

F780

8092H U/L 8093H U/L

2,3,4

19.50/0.768

F780

8092 U/L

Main - Race Series. Bearings are .0005" thinner per half to give .001" extra clearance on standard sized crankshafts. 1,5 66.987/2.6373 71.999/2.8346 2.478/0.0976 .042/.0017 22.50/0.886 F780 4 8092HX 67.000/2.6378 72.014/2.8352 .086/.0034 U/L 2,3,4 66.987/2.6373 71.999/2.8346 2.478/0.0976 .042/.0017 19.50/0.768 F780 6 8093HX 67.000/2.6378 72.014/2.8352 .086/.0034 U/L Thrust 3

73.408/2.8901 89.311/3.5162 (Nominal I.D.) (Nominal O.D.) Note : Set includes four pieces, use on No.3 position. Required with 5M8092/H/HX main set.

ENGINE

VIN CYL

Bore x Stroke

4477cc (4.5) (1FZFE)

100mm x 95mm

F817

8092T U/L

8B8091H Std. .025 .25 .50

8B8091HX Std.

5M8092 Std. .25 .50

5M8092H Std. .025 .25 .50

5M8092HX Std.

2T8092 Std.

TORQUE SETTINGS

Connecting Rod 35 ft.lbs + 90 deg turn Main Bearing 54 ft.lbs + 90 deg turn Consult Service Manual

Rod

Main 1-7

56.980/2.2433 57.000/2.2441

60.520/2.3826 60.540/2.3835

1.745/0.0687 .030/.0011 .096/.0038

21.40/0.843

68.980/2.7157 69.000/2.7165

74.020/2.9142 74.040/2.9150

2.492/0.0981 .036/.0014 .102/.0040

23.40/0.921

Thrust 4

75.250/2.9626 93.500/3.6811 75.500/2.9724 93.750/3.6909 Note : Set includes four pieces, use on No.4 position. Required with 7M7989 main set.

2.49/0.098

28.00/1.102

F817

6B7990

7990 IH

Std. .25 .50 .75 1.0

7989 U/L

Std. .25 .50

7989T

2T7989

7M7989

F100

RB4098

RB4098 Semi

VIN CYL

4293cc (4.3) (3UZFE)

F780

Std.

Small End - Bush - not bored, single pieces. 28.010/1.1028 28.030/1.1035

ENGINE

F780

Bore x Stroke

TORQUE SETTINGS

91mm x 82.5mm

Rod 51.981/2.0465 52.000/2.0472

55.000/2.1654 55.024/2.1663

1.496/0.0589 .010/.0004 .077/.0030

19.50/0.768

Rod - Race Series. 51.981/2.0465 51.999/2.0472

55.001/2.1654 55.024/2.1663

1.496/0.0589 .010/.0004 .067/.0026

19.50/0.768

F780

F781

Std 25 50

8091H IH

Std. .025 .25 .50

301

8B8091

8091 IH

8B8091H

8B8091HX Std.

LEXUS PERFORMANCE LEXUS PERFORMANCE ENGINE INDEX Engine Disp.

Notation

2997cc (3.0)......... 3967cc (4.0).........

Engine Set No. Sizes Available

(2JZGE) (1UZFE) Type and Location

Standard Shaft Size

ENGINE

Std. .025 .25

6B8100HX Std.

7M8103H Std. .025 .25

Rod - Race Series. 51.981/2.0465 52.000/2.0472

Std.

2T8103 Std.

L6 V8

Year Line Engine Disp.

Notation

92-05 90-00

(3UZFE) (2UZFE)

Housing Bore

55.024/2.1663 55.042/2.1670

1 2

4293cc (4.3)......... 4663cc (4.7).........

Max. Bearing Thickness

Vertical Oil Clearance

Bore x Stroke 86.1mm x 86.1mm

Max. Overall Length

VIN

Cyl. V8 V8

Material Code

Qty. Set

Year Line 01-06 98-06

3 2

Bearing Shell No.

TORQUE SETTINGS Connecting Rod 22 ft.lbs + 90 deg turn Main Bearing 33 ft.lbs + 90 deg

1.506/0.0593 .012/.0005 .065/.0026

19.30/0.760

F781

8100H IH

7M8103HX

Cyl.

VIN CYL

2997cc (3.0) (2JZGE)

6B8100H

VIN

61.984/2.4403 62.001/2.4410

66.020/2.5992 66.035/2.5998

2.004/0.0789 .011/.0004 .059/.0023

20.00/0.787

F780

8103H U/L

66.020/2.5992 66.035/2.5998

2.004/0.0789 .011/.0004 .059/.0023

23.00/0.906

F780

8104H U/L

Main - Race Series. Bearings are .0005" thinner per half to give .001" extra clearance on standard sized crankshafts. 2-7 61.984/2.4403 66.020/2.5992 1.991/0.0784 .036/.0014 20.00/0.787 F780 12 8103HX 62.001/2.4410 66.035/2.5998 .084/.0033 U/L 1 61.984/2.4403 66.020/2.5992 1.991/0.0784 .036/.0014 23.00/0.906 F780 2 8104HX 62.001/2.4410 66.035/2.5998 .084/.0033 U/L Thrust 3

67.350/2.6516 81.350/3.2027 1.97/0.078 67.600/2.6614 81.600/3.2126 Note : Set includes four pieces, use on No.3 position. Required with 7M8103H/HX main set.

ENGINE

VIN CYL

3967cc (4.0) (1UZFE) 4663cc (4.7) (2UZFE)

V8 V8

Bore x Stroke 87.5mm x 82.5mm 87.5mm x 82.5mm

F817

8103T U/L

TORQUE SETTINGS Connecting Rod 18 ft.lbs + 90 deg turn Main Bearing 20 ft.lbs + 90 deg (1UZFE - Nuts & 2UZFE)

Main Bearing 36 ft.lbs (1UZFE Bolts only)

8B8091H Std. .025 .25 .50

8B8091HX Std.

Rod - Race Series. 51.981/2.0465 51.999/2.0472

Main - Race Series. 66.987/2.6373 1,5 Std. .025 .25 .50 67.000/2.6378 2,3,4

Std.

19.50/0.768

F781

8091H IH

66.987/2.6373 67.000/2.6378

71.999/2.8346 72.014/2.8352

2.491/0.0981 .017/.0007 .061/.0024

22.50/0.886

F780

8092H U/L

71.999/2.8346 72.014/2.8352

2.491/0.0981 .017/.0007 .061/.0024

19.50/0.768

F780

8093H U/L

Main - Race Series. Bearings are .0005" thinner per half to give .001" extra clearance on standard sized crankshafts. 66.987/2.6373 71.999/2.8346 2.478/0.0976 .042/.0017 22.50/0.886 F780 4 8092HX 1,5 67.000/2.6378 72.014/2.8352 .086/.0034 U/L 2,3,4

2T8092

1.496/0.0589 .010/.0004 .067/.0026

5M8092H

5M8092HX

55.001/2.1654 55.024/2.1663

66.987/2.6373 67.000/2.6378

71.999/2.8346 72.014/2.8352

2.478/0.0976 .042/.0017 .086/.0034

Thrust 3

19.50/0.768

73.408/2.8901 89.311/3.5162 (Nominal I.D.) (Nominal O.D.) Note : Set includes four pieces, use on No.3 position. Required with 5M8092H/HX main set.

302

F780

8093HX U/L

F817

8092T U/L

LEXUS PERFORMANCE Type and Location

Standard Shaft Size

ENGINE

Max. Bearing Thickness

Housing Bore

VIN CYL

4293cc (4.3) (3UZFE) Rod - Race Series. 51.981/2.0465 51.999/2.0472

55.001/2.1654 55.024/2.1663

Vertical Oil Clearance

Max. Overall Length

Bore x Stroke

Material Code

Qty. Set

Bearing Shell No.

Engine Set No. Sizes Available

TORQUE SETTINGS

91mm x 82.5mm

1.496/0.0589 .010/.0004 .067/.0026

19.50/0.768

F781

8091H IH

303

8B8091H Std. .025 .25 .50

8B8091HX Std.

LINCOLN LINCOLN ENGINE INDEX Engine Disp.

Notation

VIN

Cyl.

Duratec OHV OHV DOHC DOHC SOHC

S 3 4 H V W E F M

V6 V6 V6 V8 V8 V8 V8 V8 V8

182 (3.0) ............... 232 (3.8) ............... 232 (3.8) ............... 281 (4.6) ............... 281 (4.6) ............... 281 (4.6) ............... 302 (5.0) ............... 302 (5.0) ............... 302 (5.0) ...............

Year Line Engine Disp. 00-05 82-82 88-94 03-04 93-02 91-04 88-92 77-90 85-87

1 2 2 4 4 3 5 5 5

330 (5.4) ............... 330 (5.4) ............... 330 (5.4) ............... 351 (5.8) ............... 351 (5.8) ............... 400 (6.6) ............... 429 (7.0) ............... 460 (7.5) ...............

Notation

VIN

Cyl.

SOHC SOHC SOHC Windsor Windsor

A L R G H S N A

V8 V8 V8 V8 V8 V8 V8 V8

Year Line 99-02 98-99 02-04 80-80 77-77 77-79 68-68 68-78

6 6 6 7 7 8 9 9

LINCOLN MODEL INDEX Model

CID

AVIATOR BLACKWOOD CONTINENTAL

281 330 232 281 302 351 400 429 460

4.6 5.4 3.8 4.6 5.0 5.8 6.6 7.0 7.5

281

4.6 DOHC

232

3.8 OHV

91-94

302

5.0

232

3.8 OHV

88-94

281

4.6 DOHC

302 182 460 460 400 460 302 351

5.0 3.0 Duratec 7.5 7.5 6.6 7.5 5.0 5.8 Windsor

81 00-05 68-71 72-76 77-79 77-78 80-83 80

CONTINENTAL ANNIVERSARY CONTINENTAL EXECUTIVE CONTINENTAL GIVENCHY CONTINENTAL SIGNATURE CONTINENTAL SPINMAKER EDITION CONTINENTAL TOWN CAR LS MARK III MARK IV MARK V MARK VI

Engine Set No. Sizes Available

Type and Location

Liter

Description DOHC SOHC OHV DOHC Windsor

Standard Shaft Size

Years 03-04 02 82-90 95-02 80-87 80 77-79 68 68-78

Housing Bore

Model

Max. Bearing Thickness

Vertical Oil Clearance

VIN CYL

Bore x Stroke

182 (3.0) Duratec

89mm x 79.5mm

6B4395A Std. .25 .50 .75

6B4395AO/S2 .25 .50 .75

4M7262A Std. .25 .50 .75

RB4114 Semi

Liter

Description

Years

302

5.0

84-87

302 302 281 281 330 281 302

5.0 5.0 4.6 4.6 5.4 4.6 5.0

87-92 87-92 93-98 95-98 98-04 99-00 82-90

TOWN CAR ANNIVERSARY 281 TOWN CAR - CARTIER 281 302 TOWN CAR EXECUTIVE 281 TOWN CAR - JACK NICKLAUS 281 TOWN CAR SIGNATURE 281 302 TOWN CAR SIGNATURE SE 302 TOWN CAR TOURING EDITION 281 TOWN CAR TOURNAMENT EDITION 281 TOWN CAR ULTIMATE 281 VERSAILLES 302 351

ENGINE

CID

MARK VII MARK VII - BILL BLASS MARK VII - LSC MARK VIII MARK VIII - LSC NAVIGATOR TOWN CAR

Max. Overall Length

DOHC DOHC SOHC SOHC

4.6 SOHC 4.6 SOHC 5.0

96 91-03 87-90

4.6 SOHC

91-04

4.6 SOHC

4.6 SOHC 5.0

91-04 87-90

5.0

4.6 SOHC

4.6 SOHC 5.0 5.8 Windsor

04 77-80 77

Material Code

Qty. Set

Bearing Shell No.

TORQUE SETTINGS Connecting Rod + 90 degrees Step 3 Connecting Rod 17 ft.lbs/23 Nm Step 1 Connecting Rod 32 ft.lbs/43 Nm Step 2 Main Bearing Consult Service Manual

Rod - High Strength Aluminum Silicon material. 49.972/1.9674 53.015/2.0872 1.501/0.0591 .023/.0009 49.990/1.9681 53.035/2.0880 .077/.0030

18.00/0.709

F810

4395A

Rod - .002" oversize OD version of 6B4395A. 49.972/1.9674 53.066/2.0892 1.651/0.0650 .023/.0009 49.990/1.9681 53.086/2.0900 (@0.25mm u/s) .077/.0030

18.00/0.709

F810

9082A IH

Main - High Strength Aluminum Silicon material. 62.969/2.4791 67.998/2.6771 2.502/0.0985 .020/.0008 1,2,3 62.992/2.4800 68.020/2.6779 .060/.0024

17.90/0.705

F810

7262A U/L

4 (Fl)

22.30/0.878

F810

7263A U/L

62.969/2.4791 62.992/2.4800

67.998/2.6771 68.020/2.6779

71.100/2.7992 71.350/2.8090

93.550/3.6831 93.800/3.6929

2.502/0.0985 .020/.0008 .064/.0025

1.95/0.077

Small End - not bored, single pieces. 21.011/0.8272 24.030/0.9461 21.013/0.8273 24.038/0.9464

21.46/0.845

304

7263T

F100

RB4114

LINCOLN Type and Location

Standard Shaft Size

Max. Bearing Thickness

Housing Bore

Vertical Oil Clearance

ENGINE

VIN CYL

Bore x Stroke

232 (3.8) OHV 232 (3.8) OHV

3 4

97mm x 86mm 97mm x 86mm

V6 V6

Max. Overall Length

Material Code

Qty. Set

Bearing Shell No.

Engine Set No. Sizes Available

TORQUE SETTINGS

Connecting Rod 31-36 ft.lbs/42-48 Nm Main Bearing 65-81 ft.lbs/88-110 Nm

Rod 58.674/2.3100 58.699/2.3110

61.636/2.4266 61.656/2.4274

1.462/0.0576 .013/.0005 .084/.0033

Rod - .002" oversize OD version of 6B1283P. 58.674/2.3100 61.687/2.4286 1.614/0.0635 .014/.0006 58.699/2.3110 61.707/2.4294 (@ 0.25 mm u/s) .085/.0033 Main - engines 1982 & 1988. 1,3,4 63.978/2.5188 68.890/2.7122 2.437/0.0959 .013/.0005 64.003/2.5198 68.910/2.7130 .084/.0033 2 (Fl) 63.978/2.5188 68.890/2.7122 2.437/0.0959 .013/.0005 64.003/2.5198 68.910/2.7130 .084/.0033 To be superceded by 4M7295A when stock exhausted. Main - engines 1989-94 only. 1,2,4 63.983/2.5190 68.890/2.7122 2.451/0.0965 .013/.0005 64.003/2.5198 68.910/2.7130 .058/.0023 3 (Fl) 63.983/2.5190 68.890/2.7122 2.451/0.0965 .013/.0005 64.003/2.5198 68.910/2.7130 .058/.0023 To be superceded by 4M7295A when stock exhausted.

17.06/0.672

21.66/0.853

F780

29.62/1.166

F780

21.79/0.858

F780

29.62/1.166

F780

5200 IH 9055 IH 5202 U/L 5203 U/L

5238 U/L 5239 U/L

Main - engines 1982 & 1988 - Optional set to 4M1561P with +0.004" overflange length increase. *See dimensional infromation below. 1,3,4 63.978/2.5188 68.890/2.7122 2.437/0.0959 .013/.0005 21.66/0.853 F780 6 5202 64.003/2.5198 68.910/2.7130 .084/.0033 U/L 3 (Fl) 63.978/2.5188 68.890/2.7122 2.437/0.0959 .013/.0005 29.72/1.170 F780 2 5205 64.003/2.5198 68.910/2.7130 .084/.0033 U/L To be discontinued when stock exhausted.

6B1283P Std. .25 .50 .75 1.0

6B1283PO/S2 .25 .50 .75

4M1561P Std. .25 .50 .75 1.0

4M1812P Std. .25 .50 .75 1.0

4M5205P .25 .50 .75

* DIMENSIONAL INFORMATION FOR 4M5205P Overall Width (Nominal) Increase in Width 0.25 mm u/s shaft 1.170" +0.004" 0.50 mm u/s shaft 1.170" +0.004" 0.75 mm u/s shaft 1.170" +0.004" Main - engines 1982 & 1988 - Optional set to 4M1561P with +0.010" overflange length increase. *See dimensional infromation below. 63.978/2.5188 68.890/2.7122 2.437/0.0959 .013/.0005 21.66/0.853 F780 6 5202 1,3,4 64.003/2.5198 68.910/2.7130 .084/.0033 U/L 3 (Fl)

63.978/2.5188 68.890/2.7122 64.003/2.5198 68.910/2.7130 To be discontinued when stock exhausted.

2.437/0.0959 .013/.0005 .058/.0023

29.87/1.176

F780

4M5208P .25 .50 .75

5208 U/L

* DIMENSIONAL INFORMATION FOR 4M5208P Overall Width (Nominal) Increase in Width 0.25 mm u/s shaft 1.176" +0.010" 0.50 mm u/s shaft 1.176" +0.010" 0.75 mm u/s shaft 1.176" +0.010" Main - for engines 1982 on - High Strength Aluminum Silicon material. 1,2,4 63.983/2.5190 68.890/2.7122 2.451/0.0965 .013/.0005 23.50/0.925 64.003/2.5198 68.910/2.7130 .058/.0023 1,2,4 63.983/2.5190 68.890/2.7122 2.451/0.0965 .013/.0005 21.79/0.858 64.003/2.5198 68.910/2.7130 .058/.0023 3 (Fl)

F810

7294WA U 7294A L

63.983/2.5190 64.003/2.5198

68.890/2.7122 68.910/2.7130

2.438/0.0960 .013/.0005 .058/.0023

29.62/1.166

F810

7295A U/L

Cam - 1982 engines. 52.083/2.0505 1,4 52.108/2.0515

55.664/2.1915 55.690/2.1925

1.763/0.0694

16.26/0.640

F23

F-45-1

55.283/2.1765 55.308/2.1775

1.570/0.0619

14.22/0.560

F23

F-45-2

2,3

52.083/2.0505 52.108/2.0515

4M7295A Std. .25 .50 .75

4C1197S Std.

305

LINCOLN Engine Set No. Sizes Available

Type and Location

Max. Overall Length

Material Code

Qty. Set

Bearing Shell No.

1.763/0.0694 .025/.0010 .076/.0030

16.26/0.640

F23

F-52-1

55.664/2.1915 55.687/2.1924

1.570/0.0619 .025/.0010 .076/.0030

14.22/0.560

F23

F-51-2

Balance Shaft - 1988-94 engines. Front & 52.083/2.0505 55.664/2.1915 Rear 52.108/2.0515 55.690/2.1925

1.763/0.0694 .076/.0030

16.26/0.640

F23

AGB-51-1

Housing Bore

Max. Bearing Thickness

Vertical Oil Clearance

(Contâ&#x20AC;&#x2122;d.) 4C1447S Std.

Cam - 1988-94 engines. 52.083/2.0505 55.664/2.1915 1,4 52.108/2.0515 55.687/2.1924 2,3

2BS1445S Std.

Standard Shaft Size

52.083/2.0505 52.108/2.0515

ENGINE

VIN CYL

Bore x Stroke

281 (4.6) SOHC

3.550 x 3.542

8B1442A Std. .25 .50 .75 1.0

8B1442AO/S2 .25 .50 .75 1.0

8B1442P Std. .25 .50 .75 1.0

8B1442PO/S2 .25 .50 .75 1.0

Rod - High Strength Aluminum Silicon material. 52.984/2.0860 56.866/2.2388 1.928/0.0759 .012/.0005 53.002/2.0867 56.886/2.2396 .063/.0025

20.96/0.825

F810

5636A IH

Rod - .002" oversize back version of 8B1442A. 52.984/2.0860 56.916/2.2408 2.075/0.0817 .013/.0005 53.002/2.0867 56.937/2.2416 (@ .25 mm u/s) .078/.0031

20.95/0.825

F810

9080A IH

Rod - To be superceded by 8B1442A when stock exhausted. 52.984/2.0860 56.866/2.2388 1.928/0.0759 .012/.0005 53.002/2.0867 56.886/2.2396 .063/.0025

20.96/0.825

F780

5636 IH

Rod - To be superceded by 8B1442AO/S2 when stock exhausted. 52.984/2.0860 56.916/2.2408 2.075/0.0817 .013/.0005 53.002/2.0867 56.937/2.2416 (@ .25 mm u/s) .078/.0031

20.95/0.825

F780

9080 IH

18.25/0.719

F780

19.12/0.753

F780

22.61/0.890

F780

2.36/0.093

F817

5638 L 5638W U 5639 L 5639T U

Main - for cast iron blocks from 1993 on. 1-4 67.483/2.6568 72.403/2.8505 2.443/0.0962 Std. .25 .50 .75 1.0 67.503/2.6576 72.420/2.8512 1-5 67.483/2.6568 72.403/2.8505 2.443/0.0962 67.503/2.6576 72.420/2.8512 5 (Fl) 67.483/2.6568 72.403/2.8505 2.443/0.0962 67.503/2.6576 72.420/2.8512 5 (TW) 76.000/2.9921 91.500/3.6024 76.250/3.0020 91.750/3.6122 (O.D.) (I.D.) Set includes one thrustwasher. Use on No. 5 upper position.

5M2007P

5M5649P 1.0

TORQUE SETTINGS Connecting Rod 23 ft.lbs/31 Nm + 90 deg Main Bearing 24 ft.lbs/33 Nm + 90 deg

.014/.0006 .077/.0030 .014/.0006 .077/.0030 .014/.0006 .077/.0030

.014/.0006 .077/.0030 .014/.0006 .077/.0030

19.12/0.753

F780

22.86/0.900

F780

5638W U 5649 U/L

5M7141P

306

18.25/0.719

F780

19.12/0.753

F780

22.61/0.890

F780

5638 L 5638W U 5639 U/L

LINCOLN Type and Location

Standard Shaft Size

Max. Bearing Thickness

Housing Bore

Vertical Oil Clearance

Max. Overall Length

Material Code

Qty. Set

Bearing Shell No.

Engine Set No. Sizes Available

(Cont’d.) Cam Tower 26.937/1.0605 1-6 26.962/1.0615 1-6

26.937/1.0605 26.962/1.0615

29.119/1.1464 29.144/1.1474

1.083/0.0426 .013/.0005 .038/.0015

14.70/0.579

F810

5194A L

29.190/1.1492 29.144/1.1474

1.083/0.0426 .013/.0005 .038/.0015

14.70/0.579

F810

5195A U

23.75/0.935

F100

RB4113

Small End - single pieces, not bored. 21.994/0.8659 24.016/0.9455 21.999/0.8661 24.041/0.9465 New Item. Order when announced.

6C1100A Std. .25

RB4113 Semi

ENGINE

VIN CYL

Bore x Stroke

281 (4.6) DOHC 281 (4.6) DOHC

H V

3.550 x 3.542 3.550 x 3.542

V8 V8

TORQUE SETTINGS

Connecting Rod 23 ft.lbs/31 Nm + 90 deg Main Bearing 24 ft.lbs/33 Nm + 90 deg

Rod - High Strength Aluminum Silicon material. 52.984/2.0860 56.866/2.2388 1.928/0.0759 .012/.0005 53.002/2.0867 56.886/2.2396 .063/.0025

20.96/0.825

Rod - .002" oversize back version of 8B1442A. 52.984/2.0860 56.916/2.2408 2.075/0.0817 .013/.0005 53.002/2.0867 56.937/2.2416 (@ .25 mm u/s) .078/.0031

20.95/0.825

Rod - To be superceded by 8B1442A when stock exhausted. 52.984/2.0860 56.866/2.2388 1.928/0.0759 .012/.0005 53.002/2.0867 56.886/2.2396 .063/.0025

20.96/0.825

Rod - To be superceded by 8B1442AO/S2 when stock exhausted. 52.984/2.0860 56.916/2.2408 2.075/0.0817 .013/.0005 53.002/2.0867 56.937/2.2416 (@ .25 mm u/s) .078/.0031

20.95/0.825

Cam Tower - for engines 1993-early ’96. 26.937/1.0605 29.119/1.1464 1,6,7,12 36.962/1.4552 29.144/1.1474

1.083/0.0426 .015/.0006 .081/.0032

14.70/0.579

F810

F780

5636A IH 9080A IH 5636 IH

8B1442AO/S2 .25 .50 .75 1.0

8B1442P Std. .25 .50 .75 1.0

8B1442PO/S2

5195A L

6C1200A

26.937/1.0605 26.962/1.0615

29.119/1.1464 29.144/1.1474

1.083/0.0426 .015/.0006 .081/.0032

14.70/0.579

F810

5192A U

2-5,8-11

26.937/1.0605 26.962/1.0615 26.937/1.0605 26.962/1.0615

29.119/1.1464 29.144/1.1474 29.119/1.1464 29.144/1.1474

1.083/0.0426 .015/.0006 .081/.0032 1.083/0.0426 .015/.0006 .081/.0032

11.80/0.465

F810

5191A L 5193A

Cam Tower - for engines late ’96-99. 26.937/1.0605 29.119/1.1464 1,6,7,12 26.962/1.0615 29.144/1.1474

1.093/0.0430 .015/.0006 .081/.0032

14.70/0.579

F810

5190A L

11.80/0.465

1,6,7,12

26.937/1.0605 26.962/1.0615

29.119/1.1464 29.144/1.1474

1.083/0.0426 .015/.0006 .081/.0032

14.70/0.579

F810

5192A U

2-5,8-11

26.937/1.0605 26.962/1.0615 26.937/1.0605 26.962/1.0615

29.119/1.1464 29.144/1.1474 29.119/1.1464 29.144/1.1474

1.083/0.0426 .015/.0006 .081/.0032 1.083/0.0426 .015/.0006 .081/.0032

11.80/0.465

F810

11.80/0.465

F810

5191A U 5193A L

23.75/0.935

F100

Small End - single pieces, not bored. 21.994/0.8659 24.016/0.9455 21.999/0.8661 24.041/0.9465

8B1442A Std. .25 .50 .75 1.0

9080 IH

1,6,7,12

2-5,8-11

RB4113

.25 .50 .75 1.0

Std.

6C1201A Std.

RB4113 Semi

ENGINE

VIN CYL

Bore x Stroke

302 (5.0) 302 (5.0) 302 (5.0)

E F M

4.00 x 3.00 4.00 x 3.00 4.00 x 3.00

V8 V8 V8

TORQUE SETTINGS

Connecting Rod 19-24 ft.lbs/26-32 Nm Main Bearing 60-70 ft.lbs/81-95 Nm

Rod - High Strength Aluminum Silicon material. 53.919/2.1228 56.871/2.2390 1.458/0.0574 .016/.0006 53.939/2.1236 56.891/2.2398 .081/.0032

18.44/0.726

Rod - .002" oversize back version of 8B634A. 53.919/2.1228 56.871/2.2390 1.610/0.0634 .016/.0006 53.939/2.1236 56.891/2.2398 (@ .010" u/s) .081/.0032

18.44/0.726

307

F810

2131A

8B634A Std. 01 10 20 30 40

F810

9030A IH

8B634AO/S2 10 20 30 40

LINCOLN Engine Set No. Sizes Available

Type and Location

Standard Shaft Size

Housing Bore

53.919/2.1228 53.939/2.1236

56.871/2.2390 56.891/2.2398

Max. Bearing Thickness

Vertical Oil Clearance

Max. Overall Length

Material Code

Qty. Set

Bearing Shell No.

18.44/0.726

F780

2131 IH

18.44/0.726

F780

9030 IH

(Contâ&#x20AC;&#x2122;d.) Rod

8B634P Std. 01 10 20 30 40

8B634PO/S2 10 20 30 40

5M1666P 10 20 30 40

Rod - .002" oversize OD version of 8B634P. 53.919/2.1228 56.922/2.2410 1.610/0.0634 .017/.0007 53.939/2.1236 56.942/2.2418 (@ .010" u/s) .083/.0033

Main - optional set to 5M590P with +0.020" overflange length increase for undersizes. *See below for dimensional information. 57.104/2.2482 62.006/2.4412 2.438/0.0960 .005/.0002 22.48/0.885 F780 8 2132 1,2,3,4 57.125/2.2490 62.027/2.4420 .073/.0029 U/L 3 (Fl)

57.104/2.2482 62.006/2.4412 57.125/2.2490 62.027/2.4420 Stock not available from fee warehouses.

.010" u/s shaft .020" u/s shaft .030" u/s shaft .040" u/s shaft

5M1746P 10 20 30 40

29.28/1.153

F780

2145 U/L

.010" u/s shaft .020" u/s shaft .030" u/s shaft .040" u/s shaft

10 20 30

2.438/0.0960 .005/.0002 .073/.0029

* DIMENSIONAL INFORMATION FOR 5M1666P Overall Width (Nominal) Increase in Width 1.153" +0.020" 1.153" +0.020" 1.153" +0.020" 1.153" +.0.020"

3 (Fl)

5M2144P

1.458/0.0574 .016/.0006 .081/.0032

2.438/0.0960 .005/.0002 .073/.0029

29.03/1.143

F780

2139 U/L

* DIMENSIONAL INFORMATION FOR 5M1746P Overall Width (Nominal) Increase in Width 1.143" +0.010" 1.143" +0.010" 1.143" +0.010" 1.143" +0.010"

57.104/2.2482 62.006/2.4412 57.125/2.2490 62.027/2.4420 To be discontinued when stock exhausted.

2.563/0.1009 .005/.0002 (@ .010" u/s) .073/.0029

28.88/1.137

F780

2144 U/L

5M590A

3 (Fl)

57.104/2.2482 57.125/2.2490

62.006/2.4412 62.027/2.4420

2.438/0.0960 .005/.0002 .073/.0029

5M590P

308

.005/.0002 .073/.0029 .005/.0002 .073/.0029

22.48/0.885

F810

2132A U/L

28.78/1.133

F810

2133A U/L

22.48/0.885

F780

28.78/1.133

F780

2132 U/L 2133 U/L

LINCOLN Type and Location

Standard Shaft Size

Max. Bearing Thickness

Housing Bore

Vertical Oil Clearance

Max. Overall Length

Material Code

Qty. Set

Bearing Shell No.

Engine Set No. Sizes Available

(Contâ&#x20AC;&#x2122;d.) Cam 1

52.845/2.0805 52.870/2.0815

55.982/2.2040 56.007/2.2050

1.530/0.0602

16.89/0.665

F23

F-18-1

52.464/2.0655 52.490/2.0665

55.600/2.1890 55.626/2.1900

1.530/0.0602

16.89/0.665

F23

F-18-2

52.083/2.0505 52.108/2.0515 51.702/2.0355 51.727/2.0365 51.321/2.0205 51.346/2.0215

55.220/2.1740 55.245/2.1750 54.839/2.1590 54.864/2.1600 54.458/2.1440 54.483/2.1450

1.530/0.0602

16.89/0.665

F23

F-18-3

1.530/0.0602

16.89/0.665

F23

F-18-4

1.530/0.0602

16.89/0.665

F23

F-18-5

4 5

VIN CYL

Bore x Stroke

330 (5.4) SOHC 330 (5.4) SOHC 330 (5.4) SOHC

A L R

3.551 x 4.160 3.551 x 4.160 3.551 x 4.160

V8 V8 V8

TORQUE SETTINGS

20.96/0.825

Rod - .002" oversize back version of 8B1442A. 52.984/2.0860 56.916/2.2408 2.075/0.0817 .013/.0005 53.002/2.0867 56.937/2.2416 (@ .25 mm u/s) .078/.0031

20.95/0.825

Rod - To be superceded by 8B1442A when stock exhausted. 52.984/2.0860 56.866/2.2388 1.928/0.0759 .012/.0005 53.002/2.0867 56.886/2.2396 .063/.0025

20.96/0.825

Rod - To be superceded by 8B1442AO/S2 when stock exhausted. 52.984/2.0860 56.916/2.2408 2.075/0.0817 .013/.0005 53.002/2.0867 56.937/2.2416 (@ .25 mm u/s) .078/.0031

20.95/0.825

Main - High Strength Aluminum Silicon material. 1 67.480/2.6567 72.400/2.8504 2.443/0.0962 67.506/2.6577 72.421/2.8512 2,3,4,5 67.480/2.6567 72.400/2.8504 2.443/0.0962 67.506/2.6577 72.421/2.8512 1-5 67.480/2.6567 72.400/2.8504 2.443/0.0962 67.506/2.6577 72.421/2.8512 5 76.750/3.0216 96.750/3.8090 (ID) (OD) 77.000/3.0315 97.000/3.8189

26.937/1.0605 26.962/1.0615

.008/.0003 .071/.0028 .008/.0003 .071/.0028 .008/.0003 .071/.0028

Connecting Rod 23 ft.lbs/31 Nm + 90 deg Main Bearing 24 ft.lbs/33 Nm + 90 deg

Rod - High Strength Aluminum Silicon material. 52.984/2.0860 56.866/2.2388 1.928/0.0759 .012/.0005 53.002/2.0867 56.886/2.2396 .063/.0025

1-6

5C510S Std.

ENGINE

Cam Tower 26.937/1.0605 1-6 26.962/1.0615

19.26/0.758

F810

F780

F810

20.06/0.790

F810

20.06/0.790

F810

2.92/0.115

F810

5636A IH 9080A IH 5636 IH 9080 IH 7293A U 7296A U 7296A L 7296T U/L

29.119/1.1464 29.144/1.1474

1.083/0.0426 .013/.0005 .038/.0015

14.70/0.579

F810

5194A L

29.190/1.1492 29.144/1.1474

1.083/0.0426 .013/.0005 .038/.0015

14.70/0.579

F810

5195A U

23.75/0.935

F100

RB4113

Small End - single pieces, not bored. 21.994/0.8659 24.016/0.9455 21.999/0.8661 24.041/0.9465

8B1442A Std. .25 .50 .75 1.0

8B1442AO/S2 .25 .50 .75 1.0

8B1442P Std. .25 .50 .75 1.0

8B1442PO/S2 .25 .50 .75 1.0

5M7296A Std. .25 .50 .75 1.0

6C1100A Std. .25

RB4113 Semi

ENGINE

VIN CYL

Bore x Stroke

351 (5.8) Windsor 351 (5.8) Windsor

G H

4.00 x 3.50 4.00 x 3.50

V8 V8

TORQUE SETTINGS

Connecting Rod 40-45 ft.lbs/54-61 Nm Main Bearing 95-105 ft.lbs/129-142 Nm

Rod - High Strength Aluminum Silicon material. 58.682/2.3103 61.633/2.4265 1.465/0.0577 .010/.0004 58.702/2.3111 61.653/2.4273 .066/.0026

18.18/0.716

Rod - .002" oversize OD version of 8B831A. 58.682/2.3103 61.684/2.4285 1.617/0.0637 .010/.0004 58.702/2.3111 61.704/2.4293 (@ .010" u/s) .066/.0026

18.18/0.716

Rod - To be superceded by 8B831A when stock exhausted. 58.682/2.3103 61.633/2.4265 1.465/0.0577 .010/.0004 58.702/2.3111 61.653/2.4273 .066/.0026

18.18/0.716

309

F810

F780

2176A IH 9031A IH 2176 IH

8B831A Std. 10 20 30 40

8B831AO/S2 10 20 30 40

8B831P Std. 01 10 20 30 40

LINCOLN Engine Set No. Sizes Available

Type and Location

Standard Shaft Size

Housing Bore

Max. Bearing Thickness

Vertical Oil Clearance

Material Code

Qty. Set

Bearing Shell No.

18.18/0.716

F780

9031 IH

21.26/0.837

F810

21.26/0.837

F810

28.78/1.133

F810

2177A U 5207A L 2178A U

28.78/1.133

F810

5209A L

21.26/0.837

F780

21.26/0.837

F780

28.78/1.133

F780

2177 U 5207 L 2178 U

28.78/1.133

F780

(Contâ&#x20AC;&#x2122;d.)

8B831PO/S2 10 20 30 40

Rod - .002" oversize OD version of 8B831P. 58.682/2.3103 61.684/2.4285 1.617/0.0637 .002/.0001 58.702/2.3111 61.704/2.4293 (@ .010" u/s) .068/.0027 To be superceded by 8B831AO/S2 when stock exhausted.

Main - High Strength Aluminum Silicon material. 1,2,4,5 76.185/2.9994 81.082/3.1922 2.433/0.0958 Std. 10 20 30 40 76.205/3.0002 81.102/3.1930 1,2,4,5 76.185/2.9994 81.082/3.1922 2.433/0.0958 76.205/3.0002 81.102/3.1930 3 (Fl) 76.185/2.9994 81.082/3.1922 2.433/0.0958 76.205/3.0002 81.102/3.1930

5M1432A

3 (Fl)

76.185/2.9994 76.205/3.0002

81.082/3.1922 81.102/3.1930

.011/.0004 .076/.0030 .011/.0004 .076/.0030 .011/.0004 .076/.0030

2.433/0.0958 .011/.0004 .076/.0030

Main - To be superceded by 5M1432A when stock exhausted. 1,2,4,5 76.185/2.9994 81.082/3.1922 2.433/0.0958 .011/.0004 76.205/3.0002 81.102/3.1930 .076/.0030 Std. 01 10 20 30 40 1,2,4,5 76.185/2.9994 81.082/3.1922 2.433/0.0958 .011/.0004 76.205/3.0002 81.102/3.1930 .076/.0030 3 (Fl) 76.185/2.9994 81.082/3.1922 2.433/0.0958 .011/.0004 76.205/3.0002 81.102/3.1930 .076/.0030

5M1432P

3 (Fl)

76.185/2.9994 81.082/3.1922 2.433/0.0958 .011/.0004 76.205/3.0002 81.102/3.1930 .076/.0030 Overflange length remains constant for standard and undersizes.

5M5249A 10 20 30 40

3 (Fl) 3 (Fl)

76.185/2.9994 76.205/3.0002 76.185/2.9994 76.205/3.0002

81.082/3.1922 81.102/3.1930 81.082/3.1922 81.102/3.1930

2.433/0.0958 .011/.0004 .076/.0030 2.433/0.0958 .011/.0004 .076/.0030

21.26/0.837

F810

29.03/1.143

F810

76.185/2.9994 76.205/3.0002

81.082/3.1922 81.102/3.1930

2.433/0.0958 .011/.0004 .076/.0030

29.03/1.143

F810

5249A L

.010" u/s shaft .020" u/s shaft .030" u/s shaft .040" u/s shaft

5C510S

5209 L

Main - optional set to 5M1432A with +.010" overflange length increase for undersizes. *See dimensional information below. 76.185/2.9994 81.082/3.1922 2.433/0.0958 .011/.0004 21.26/0.837 F810 4 2177A 1,2,4,5 76.205/3.0002 81.102/3.1930 .076/.0030 U 1,2,4,5

Cam 1

5207A L 2170A U

* DIMENSIONAL INFORMATION FOR 5M5249A Overall Width (Nominal) Increase in Width 1.143" +0.010" 1.143" +0.010" 1.143" +0.010" 1.143" +0.010"

52.845/2.0805 52.870/2.0815

55.982/2.2040 56.007/2.2050

1.530/0.0602

16.89/0.665

F23

F-18-1

52.464/2.0655 52.490/2.0665

55.600/2.1890 55.626/2.1900

1.530/0.0602

16.89/0.665

F23

F-18-2

52.083/2.0505 52.108/2.0515 51.702/2.0355 51.727/2.0365 51.321/2.0205 51.346/2.0215

55.220/2.1740 55.245/2.1750 54.839/2.1590 54.864/2.1600 54.458/2.1440 54.483/2.1450

1.530/0.0602

16.89/0.665

F23

F-18-3

1.530/0.0602

16.89/0.665

F23

F-18-4

1.530/0.0602

16.89/0.665

F23

F-18-5

Std.

4 5

Max. Overall Length

ENGINE

VIN CYL

Bore x Stroke

400 (6.6)

4.00 x 4.00

TORQUE SETTINGS Connecting Rod 40-45 ft.lbs/54-61 Nm Main Bearing 35-45 ft.lbs/47-61 Nm (3/8" bolts only) Main Bearing 95-105 ft.lbs/129-142 Nm (1/2" bolts only)

Rod

8B927P Std. 01 10 20 30 40

58.682/2.3103 58.702/2.3111

61.880/2.4362 61.897/2.4369

1.588/0.0625 .002/.0001 .065/.0026

310

18.44/0.726

F780

2106C IH

LINCOLN Type and Location

Standard Shaft Size

Max. Bearing Thickness

Housing Bore

Vertical Oil Clearance

Max. Overall Length

Material Code

Qty. Set

Bearing Shell No.

Engine Set No. Sizes Available

(Contâ&#x20AC;&#x2122;d.) Rod - .002" oversize OD version of 8B927P. 58.682/2.3103 61.931/2.4382 1.740/0.0685 .003/.0001 58.702/2.3111 61.948/2.4390 (@ .010" u/s) .066/.0026 Main - High Strength Aluminum Silicon material. 1,2,4,5 76.185/2.9994 81.082/3.1922 2.433/0.0958 76.205/3.0002 81.102/3.1930 1,2,4,5 76.185/2.9994 81.082/3.1922 2.433/0.0958 76.205/3.0002 81.102/3.1930 3 (Fl) 76.185/2.9994 81.082/3.1922 2.433/0.0958 76.205/3.0002 81.102/3.1930 3 (Fl) 76.185/2.9994 81.082/3.1922 2.433/0.0958 76.205/3.0002 81.102/3.1930

.011/.0004 .076/.0030 .011/.0004 .076/.0030 .011/.0004 .076/.0030 .011/.0004 .076/.0030

Main - To be superceded by 5M1432A when stock exhausted. 1,2,4,5 76.185/2.9994 81.082/3.1922 2.433/0.0958 .011/.0004 76.205/3.0002 81.102/3.1930 .076/.0030 1,2,4,5 76.185/2.9994 81.082/3.1922 2.433/0.0958 .011/.0004 76.205/3.0002 81.102/3.1930 .076/.0030 3 (Fl) 76.185/2.9994 81.082/3.1922 2.433/0.0958 .011/.0004 76.205/3.0002 81.102/3.1930 .076/.0030 3 (Fl) 76.185/2.9994 81.082/3.1922 2.433/0.0958 .011/.0004 76.205/3.0002 81.102/3.1930 .076/.0030 Overflange length remains constant for standard and undersizes.

18.18/0.716

21.26/0.837

F780

F810

21.26/0.837

F810

28.78/1.133

F810

28.78/1.133

F810

21.26/0.837

F780

21.26/0.837

F780

28.78/1.133

F780

28.78/1.133

F780

9051 IH 2177A U 5207A L 2178A U 5209A L 2177 U 5207 L 2178 U 5209 L

76.185/2.9994 76.205/3.0002 76.185/2.9994 76.205/3.0002 76.185/2.9994 76.205/3.0002

81.082/3.1922 81.102/3.1930 81.082/3.1922 81.102/3.1930 81.082/3.1922 81.102/3.1930

.010" u/s shaft .020" u/s shaft .030" u/s shaft .040" u/s shaft Cam 1

2.433/0.0958 .011/.0004 .076/.0030 2.433/0.0958 .011/.0004 .076/.0030 2.433/0.0958 .011/.0004 .076/.0030

21.26/0.837

F810

29.03/1.143

F810

29.03/1.143

F810

8B927PO/S2 10 20 30 40

5M1432A Std. 10 20 30 40

5M1432P Std. 01 10 20 30 40

5M5249A 10 20 30 40

5207A L 2170A U 5249A L

* DIMENSIONAL INFORMATION FOR 5M5249A Overall Width (Nominal) Increase in Width 1.143" +0.010" 1.143" +0.010" 1.143" +0.010" 1.143" +0.010"

53.950/2.1240 53.975/2.1250

57.137/2.2495 57.163/2.2505

1.565/0.0616

16.89/0.665

F23

F-26-1

52.464/2.0655 52.489/2.0665

55.600/2.1890 55.626/2.1900

1.530/0.0602

16.89/0.665

F23

F-18-2

52.083/2.0505 52.108/2.0515

55.220/2.1740 55.245/2.1750

1.530/0.0602

16.89/0.665

F23

F-18-3

51.702/2.0355 51.727/2.0365 51.321/2.0205 51.346/2.0215

54.839/2.1590 54.864/2.1600 54.458/2.1440 54.483/2.1450

1.530/0.0602

16.89/0.665

F23

F-18-4

1.530/0.0602

16.89/0.665

F23

F-18-5

5C710S Std.

ENGINE

VIN CYL

Bore x Stroke

429 (7.0) 460 (7.5)

N A

4.36 x 3.59 4.36 x 3.85

V8 V8

TORQUE SETTINGS

Connecting Rod 40-45 ft.lbs/54-61 Nm Main Bearing 95-105 ft.lbs/129-142 Nm

Rod 63.480/2.4992 63.500/2.5000

67.366/2.6522 67.386/2.6530

1.927/0.0759 .012/.0005 .078/.0031

311

22.00/0.866

F780

5210 IH

8B818P Std. 10 20 30 40

LINCOLN Engine Set No. Sizes Available

Type and Location

Standard Shaft Size

Housing Bore

Max. Bearing Thickness

Vertical Oil Clearance

Max. Overall Length

Material Code

Qty. Set

Bearing Shell No.

F780

5212 U/L

F780

5214 IH

(Contâ&#x20AC;&#x2122;d.)

Main - Position 1,2,4,5 is half groove & Position 3 (Fl) is full groove. 76.185/2.9994 81.082/3.1922 2.432/0.0957 .013/.0005 24.13/0.950 1,2,4,5 Std. 10 20 30 40 76.205/3.0002 81.102/3.1930 .079/.0031

5M1039P

3 (Fl)

76.185/2.9994 81.082/3.1922 2.432/0.0957 .013/.0005 76.205/3.0002 81.102/3.1930 .079/.0031 Overflange length remains constant for standard and undersizes.

5M5218P 10 20 30 40

Main - optional set to 5M1039P with +0.010" overflange length increase for undersizes. *See below for dimensional information. 1,2,4,5 76.185/2.9994 81.082/3.1922 2.557/0.1007 .013/.0005 24.13/0.950 F780 8 5212 76.205/3.0002 81.102/3.1930 (@ .010" u/s) .079/.0031 U/L 3 (Fl) 76.185/2.9994 81.082/3.1922 2.557/0.1007 .013/.0005 28.70/1.130 F780 2 5218 76.205/3.0002 81.102/3.1930 (@ .010" u/s) .079/.0031 IH Stock not available from fee warehouses.

.010" u/s shaft .020" u/s shaft .030" u/s shaft .040" u/s shaft

5C1111S Std.

5C1766S Std.

28.45/1.120

Cam 1-5

53.950/2.1240 53.975/2.1250

* DIMENSIONAL INFORMATION FOR 5M5218P Overall Width (Nominal) Increase in Width 1.130" +0.010" 1.130" +0.010" 1.130" +0.010" 1.130" +0.010"

57.137/2.2495 57.163/2.2505

1.570/0.0618

14.86/0.585

F23

F-30-1

Cam - Oversize OD Cam set. Align bore housing to 2.2645"/2.2655". 53.944/2.1238 57.518/2.2645 1.763/0.0694 .028/.0011 16.00/0.630 1-5 53.969/2.1248 57.544/2.2655 .127/.0050

F820

SH1766

312

LISTER PETTER LISTER PETTER ENGINE INDEX Engine Disp.

405cc ................... 405cc ................... 408cc ................... 458cc ................... 477cc ................... 552cc ................... 552cc ................... 553cc ................... 553cc ................... 633cc ................... 634cc ................... 658cc ................... 658cc ................... 658cc ................... 773cc ................... 810cc ................... 810cc ................... 810cc ................... 810cc ................... 811cc ................... 811cc ................... 816cc ................... 915cc ................... 953cc ................... 1104cc ................. 1104cc ................. 1106cc ................. 1106cc ................. 1267cc ................. 1267cc ................. 1268cc ................. 1317cc ................. 1317cc ................. 1317cc ................. 1373cc ................. 1545cc ................. 1596cc ................. 1596cc ................. 1620cc ................. 1620cc ................. Type and Location

Notation

VIN

Cyl.

(TL2),Diesel (TL3),Diesel (LD1),Diesel (LR1),Diesel (LT1),Diesel (SL1),Diesel (LV1),Diesel (SR1),Diesel (SW1),Diesel (AV1),Diesel (AVA1),Diesel (ST1),Diesel (TS1),Diesel (PH1),Diesel (PH1W/PHW1),Diesel (PH1WM),Diesel (TR1),Diesel (PJ1),Diesel (PJ1W),Diesel (PJ1Z),Diesel (PJ1ZW),Diesel (LD2),Diesel (LR2),Diesel (LT2),Diesel (SL2),Diesel (LV2),Diesel (SR2),Diesel (SW2),Diesel (AV2),Diesel (AVA2),Diesel (ST2),Diesel (STW2),Diesel (TS2),Diesel (PH2),Diesel (PH2W/PHW2),Diesel (PH2WM),Diesel (SL3),Diesel (TR2),Diesel (P600/2),Diesel (TX2),Diesel (PJ2),Diesel (PJ2W),Diesel

Standard Shaft Size

ENGINE

2 3 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 3 2 2 2 2 2 Max. Bearing Thickness

Housing Bore

VIN CYL

405cc (LD1) Diesel

Year Line Engine Disp. 83-88 83-88 56-66 67-76 74-06 61-66 83-06 67-76 69-76 45-66 50-66 72-85 83-04 60-90 60-91 85-88 85-06 62-85 62-85 85-87 85-87 57-66 67-76 79-83 61-66 83-91 67-76 69-76 45-66 50-66 72-83 77-91 83-04 60-90 60-91 85-88 58-66 85-06 84-89 87-01 62-85 62-85

21 30 1 2 3 4 5 6 6 7 7 8 9 10 10 10 9 11 11 12 12 13 14 15 16 17 18 18 19 19 20 20 21 22 22 22 23 21 33 24 25 25

Notation

1620cc ................. 1620cc ................. 1655cc ................. 1855cc ................. 1855cc ................. 1855cc ................. 1900cc ................. 1900cc ................. 1902cc ................. 2092cc ................. 2092cc ................. 2092cc ................. 2318cc ................. 2394cc ................. 2394cc ................. 2429cc ................. 2429cc ................. 2783cc ................. 2783cc ................. 2783cc ................. 3138cc ................. 3138cc ................. 3138cc ................. 3138cc ................. 3239cc ................. 3239cc ................. 3710cc ................. 3710cc ................. 3710cc ................. 4184cc ................. 4184cc ................. 4184cc ................. 5565cc ................. 5565cc ................. 5565cc ................. 6277cc ................. 6277cc ................. 6277cc ................. 6277cc ................. 6277cc ................. 6277cc .................

Vertical Oil Clearance

Max. Overall Length

Bore x Stroke

VIN

(PJ2Z),Diesel (PJ2ZW),Diesel (SR3),Diesel (HA2),Diesel (HB2),Diesel (HW2),Diesel (ST3),Diesel (STW3),Diesel (TS3),Diesel (HR2),Diesel (HR2G),Diesel (HRW2),Diesel (TR3),Diesel (P600/3),Diesel (TX3),Diesel (PJ3),Diesel (PJ3W),Diesel (HA3),Diesel (HB3),Diesel (HW3),Diesel (HL3),Diesel (HR3),Diesel (HR3G),Diesel (HRW3),Diesel (PJ4),Diesel (PJ4W),Diesel (HA4),Diesel (HB4),Diesel (HW4),Diesel (HL4),Diesel (HR4),Diesel (HRW4),Diesel (HA6),Diesel (HB6),Diesel (HW6),Diesel (HL6),Diesel (HLT6),Diesel (HR6),Diesel (HRS6),Diesel (HRW6),Diesel (HRWS6),Diesel

Material Code

Qty. Set

Cyl. 2 2 3 2 2 2 3 3 3 2 2 2 3 3 3 3 3 3 3 3 3 3 3 3 4 4 4 4 4 4 4 4 6 6 6 6 6 6 6 6 6

Bearing Shell No.

Year Line 85-87 85-87 67-76 58-69 58-69 63-70 72-83 77-91 83-04 68-91 83-91 69-87 85-06 84-89 87-03 62-85 62-85 58-70 58-70 63-70 83-87 68-91 84-91 69-87 62-85 62-85 61-70 61-70 66-71 83-91 69-83 69-87 61-70 61-70 66-70 83-91 83-91 69-83 69-83 69-87 69-87

26 26 27 28 28 28 29 29 30 31 31 31 30 33 32 34 34 35 35 35 37 36 36 36 34 34 38 38 38 39 39 39 40 40 40 41 41 41 41 41 41

Engine Set No. Sizes Available

TORQUE SETTINGS

76.2mm x 88.9mm

Rod 53.962/2.1245 53.975/2.1250

57.671/2.2705 57.683/2.2710

1.842/0.0725 .012/.0005 .063/.0025

31.88/1.255

57.099/2.2480 57.112/2.2485 57.099/2.2480 57.112/2.2485

60.820/2.3945 60.845/2.3955 60.820/2.3945 60.845/2.3955

1.835/0.0722 .038/.0015 .093/.0037 1.835/0.0722 .038/.0015 .093/.0037

44.57/1.755

64.770/2.5500 65.020/2.5598

79.930/3.1468 80.190/3.1571

F780

2561 IH

1B2561 Std. 010 020 030 040 050 060

Main F780

44.57/1.755

F23

2.36/0.093

F250

2562 L 7882 U

2DM2562 Std. 010 020 030 040 050 060

Thrust

Small End - not bored, single pieces. 25.395/0.9998 28.575/1.1250 25.403/1.0001 28.600/1.1260

ENGINE

28.70/1.130

2T7882

RB4089

Std.

Semi

VIN CYL

405cc (LR1) Diesel

F100

7882T U/L

Bore x Stroke

TORQUE SETTINGS

76.2mm x 88.9mm

Rod 53.962/2.1245 53.975/2.1250

57.671/2.2705 57.683/2.2710

1.842/0.0725 .012/.0005 .063/.0025

313

31.88/1.255

F780

2561 IH

1B2561 Std. 010 020 030 040 050 060

LISTER PETTER Engine Set No. Sizes Available

Type and Location

Max. Overall Length

Material Code

Qty. Set

Bearing Shell No.

44.58/1.755

F780

2567 U/L

2.36/0.093

F250

7882T U/L

28.70/1.130

F100

RB4089

F780

2546 IH

Main - Gear End and also used on Flywheel end up to engine nos 4909LT131/499LT2A31. 53.955/2.1242 57.671/2.2705 1.837/0.0723 .030/.0012 25.40/1.000 F780 53.967/2.1247 57.696/2.2715 .093/.0037

2547 U/L

Standard Shaft Size

Housing Bore

57.099/2.2480 57.112/2.2485

60.820/2.3945 60.846/2.3955

64.770/2.5500 65.020/2.5598

79.930/3.1468 80.190/3.1571

Max. Bearing Thickness

Vertical Oil Clearance

(Contâ&#x20AC;&#x2122;d.) Main

2M2567 Std. 010 020 030 040 050 060

1.835/0.0722 .038/.0015 .103/.0041

Thrust

2T7882 Std.

RB4089 Semi

Small End - not bored, single pieces. 25.395/0.9998 28.575/1.1250 25.403/1.0001 28.600/1.1260

ENGINE

VIN CYL

408cc (LT1) Diesel

Bore x Stroke

TORQUE SETTINGS

82.55mm x 76.2mm

Rod

1B2546

53.967/2.1247 53.980/2.1252

Std. 010 020 030 040 050 060

2M2547 Std. 010 020 030 040 050 060

57.683/2.2710 57.696/2.2715

1.835/0.0722 .033/.0013 .085/.0033

22.10/0.870

Thrust

2T7882

64.770/2.5500 65.020/2.5598

Std.

79.930/3.1468 80.190/3.1571

2.36/0.093

F250

7882T U/L

28.45/1.120

F100

RB4086

Small End - not bored, single pieces.

RB4086 Semi

ENGINE

VIN CYL

458cc (SL1) Diesel

Bore x Stroke

TORQUE SETTINGS

80.96mm x 88.9mm

Rod

1B2561

53.962/2.1245 53.975/2.1250

57.671/2.2705 57.683/2.2710

1.842/0.0725 .012/.0005 .063/.0025

31.88/1.255

F780

2561 IH

57.099/2.2480 57.112/2.2485 57.099/2.2480 57.112/2.2485

60.820/2.3945 60.845/2.3955 60.820/2.3945 60.845/2.3955

1.835/0.0722 .038/.0015 .093/.0037 1.835/0.0722 .038/.0015 .093/.0037

44.57/1.755

F780

44.57/1.755

F23

2562 L 7882 U

64.770/2.5500 65.020/2.5598

79.930/3.1468 80.190/3.1571

2.36/0.093

F250

7882T U/L

F780

2546 IH

Main - Gear End and also used on Flywheel end up to engine nos 4909LT131/499LT2A31. 53.955/2.1242 57.671/2.2705 1.837/0.0723 .030/.0012 25.40/1.000 F780 53.967/2.1247 57.696/2.2715 .093/.0037

2547 U/L

7882T U/L

2566 IH

Std. 010 020 030 040 050 060 Main

2DM2562 Std. 010 020 030 040 050 060

Thrust

2T7882 Std.

ENGINE

VIN CYL

477cc (LV1) Diesel

Bore x Stroke

TORQUE SETTINGS

85.73mm x 82.55mm

Rod

1B2546

53.967/2.1247 53.980/2.1252

Std. 010 020 030 040 050 060

2M2547 Std. 010 020 030 040 050 060

57.683/2.2710 57.696/2.2715

1.835/0.0722 .033/.0013 .085/.0033

22.10/0.870

Thrust

2T7882

64.770/2.5500 65.020/2.5598

Std.

ENGINE

79.930/3.1468 80.190/3.1571

VIN CYL

552cc (SR1) Diesel 552cc (SW1) Diesel

1 1

2.36/0.093

Bore x Stroke

F250

TORQUE SETTINGS

88.9mm x 88.9mm 88.9mm x 88.9mm

Rod

1B2566 Std. .25 .50 .75 1.0 1.25 1.50

57.099/2.2480 57.112/2.2485

60.820/2.3945 60.846/2.3955

1.835/0.0722 .038/.0015 .103/.0041

314

31.88/1.255

F780

LISTER PETTER Type and Location

Standard Shaft Size

Max. Bearing Thickness

Housing Bore

Vertical Oil Clearance

Max. Overall Length

Material Code

Qty. Set

Bearing Shell No.

Engine Set No. Sizes Available

(Contâ&#x20AC;&#x2122;d.)

Main 57.099/2.2480 57.112/2.2485

60.820/2.3945 60.846/2.3955

64.770/2.5500 65.020/2.5598

79.930/3.1468 80.190/3.1571

1.835/0.0722 .038/.0015 .103/.0041

44.58/1.755

F780

2567 U/L

2M2567 Std. 010 020 030 040 050 060

Thrust 2.36/0.093

Small End - not bored, single pieces. 32.651/1.2855 32.671/1.2863

ENGINE

33.04/1.301

F100

7882T U/L

2T7882

RB4079

Std.

Semi

VIN CYL

553cc (AV1) Diesel 553cc (AVA1) Diesel

F250

1 1

Bore x Stroke

TORQUE SETTINGS

80mm x 110mm 80mm x 110mm

Rod 53.970/2.1248 53.990/2.1256

58.738/2.3125 58.750/2.3130

Main - Suits up to engine no. 3132347. 57.099/2.2480 61.900/2.4370 57.112/2.2485 61.925/2.4380

2.365/0.0931 .018/.0007 .076/.0030

35.68/1.405

2.369/0.0933

46.29/1.822

Main - Suits engine no. 3132348 to 3150399. 57.099/2.2480 61.900/2.4370 2.369/0.0933 57.112/2.2485 61.925/2.4380 57.099/2.2480 61.900/2.4370 2.369/0.0933 57.112/2.2485 61.925/2.4380

46.29/1.822

F780

F23

54.10/2.130

F23

2.36/0.093

1B2901

2901 IH

Std. 010 020 030 040 050 060

7612 Bush

Std. 010 020 030 040 050 060

7612 Bush 7614 Bush

2M7612

2M7614 Std. 010 020 030 040 050 060

Thrust 61.820/2.4339 62.078/2.4440

81.813/3.2210 82.067/3.2310

30.81/1.213

F100

RB4003

RB4003 Semi

VIN CYL

633cc (ST1) Diesel

2T7612 Std.

Small End - not bored, single pieces. 30.000/1.1811 35.999/1.4173 (Nominal) 36.025/1.4183

ENGINE

7612T

Bore x Stroke

TORQUE SETTINGS

95.25mm x 88.9mm

Rod 63.487/2.4995 63.500/2.5000

67.208/2.6460 67.221/2.6465

1.839/0.0724 .030/.0012 .082/.0032

31.75/1.250

63.475/2.4990 63.487/2.4995

67.196/2.6455 67.221/2.6465

1.839/0.0724 .031/.0012 .094/.0037

44.45/1.750

68.960/2.7150 69.210/2.7248

85.600/3.3701 85.850/3.3799

F780

1B2550

2550 IH

Std. 010 020 030 040 050 060

2551 U/L

Std. 010 020 030 040 050 060

Main F780

1M2551

Thrust 2.36/0.093

Small End - not bored, single pieces. 33.332/1.3123 36.512/1.4375 33.337/1.3125 36.538/1.4385

ENGINE

33.78/1.330

F100

1642T U/L

2T1642

RB4084

Std.

Semi

VIN CYL

634cc (TS1) Diesel 773cc (TR1) Diesel

F250

1 1

Bore x Stroke

TORQUE SETTINGS

95.3mm x 88.9mm 98.4mm x 101.6mm

Rod 63.487/2.4995 63.500/2.5000

67.208/2.6460 67.221/2.6465

1.835/0.0722 .038/.0015 .080/.0031

25.53/1.005

Main - Crankcase 63.475/2.4990 63.487/2.4995

67.196/2.6455 67.221/2.6465

1.839/0.0724 .031/.0012 .094/.0037

31.75/1.250

315

F780

1B2553

2553 IH

Std. 010 020 030 040 050 060

2554 U/L

Std. 010 020 030 040 050 060

1M2554

LISTER PETTER Engine Set No. Sizes Available

Type and Location

Standard Shaft Size

Housing Bore

Max. Bearing Thickness

Vertical Oil Clearance

Max. Overall Length

Material Code

Qty. Set

Bearing Shell No.

31.75/1.250

F780

2559 U/L

2.36/0.093

F250

2555T U/L

33.78/1.330

F100

RB4084

(Contâ&#x20AC;&#x2122;d.) 1M2559

Std. 010 020 030 040 050 060

Main - Main Bearing Housing 63.475/2.4990 67.196/2.6455 63.487/2.4995 67.221/2.6465

1.839/0.0724 .031/.0012 .094/.0037

Thrust

1T2555

72.000/2.8346 72.250/2.8445

Std.

RB4084 Semi

91.900/3.6181 92.150/3.6279

Small End - not bored, single pieces. 33.332/1.3123 36.512/1.4375 33.337/1.3125 36.538/1.4385

ENGINE

VIN CYL

658cc (PH1) Diesel 658cc (PH1W/PHW1) Diesel 658cc (PH1WM) Diesel

1 1 1

Bore x Stroke

TORQUE SETTINGS

87.3mm x 110mm 87.3mm x 110mm 87.3mm x 110mm

Rod

1B2496 Std. 010 020 030 040 050 060

60.312/2.3745 60.325/2.3750

64.033/2.5210 64.046/2.5215

1.834/0.0722 .040/.0016 .092/.0036

31.87/1.255

F780

2496 IH

60.274/2.3730 60.287/2.3735

65.075/2.5620 65.100/2.5630

2.369/0.0933 .050/.0020 .114/.0045

44.60/1.756

F820

7942AL Bush

60.274/2.3730 60.287/2.3735

65.075/2.5620 65.100/2.5630

2.369/0.0933 .050/.0020 .114/.0045

53.50/2.106

F820

7944AL Bush

65.126/2.5640 65.376/2.5739

84.760/3.3370 85.010/3.3468

2.36/0.093

7942T

30.48/1.200

F100

RB4092

Main

2M7942 Std. 010 020 030 040 050 060

Thrust

2T7942 Std.

RB4092 Semi

Small End - not bored, single pieces. 29.995/1.1809 33.338/1.3125 30.000/1.1811 33.363/1.3135

ENGINE

VIN CYL

810cc (PJ1) Diesel 810cc (PJ1W) Diesel

1 1

Bore x Stroke

TORQUE SETTINGS

96.82mm x 109.98mm 96.82mm x 109.98mm

Rod

1B2496

60.312/2.3745 60.325/2.3750

Std. 010 020 030 040 050 060

2M7942 Std. 010 020 030 040 050 060

2T7942 Std.

64.033/2.5210 64.046/2.5215

1.834/0.0722 .040/.0016 .092/.0036

Main - Suits engines with HJC8 flywheel end. 60.274/2.3730 65.075/2.5620 2.369/0.0933 60.287/2.3735 65.100/2.5630 60.274/2.3730 65.075/2.5620 2.369/0.0933 60.287/2.3735 65.100/2.5630

.050/.0020 .114/.0045 .050/.0020 .114/.0045

Thrust - Suits HJC23 crankshaft. 65.126/2.5640 84.760/3.3370 65.376/2.5739 85.010/3.3468

ENGINE

VIN CYL

810cc (PJ1Z) Diesel 810cc (PJ1ZW) Diesel

1 1

Bore x Stroke

31.87/1.255

F780

2496 IH

44.60/1.756

F820

53.50/2.106

F820

7942AL Bush 7944AL Bush

2.36/0.093

7942T

TORQUE SETTINGS

96.82mm x 109.98mm 96.82mm x 109.98mm

Rod

1B2496 Std. 010 020 030 040 050 060

60.312/2.3745 60.325/2.3750

64.033/2.5210 64.046/2.5215

1.834/0.0722 .040/.0016 .092/.0036

31.87/1.255

F780

2496 IH

60.274/2.3730 60.287/2.3735 60.274/2.3730 60.287/2.3735

65.075/2.5620 65.100/2.5630 65.075/2.5620 65.100/2.5630

2.369/0.0933 .050/.0020 .114/.0045 2.369/0.0933 .050/.0020 .114/.0045

44.60/1.756

F820

53.50/2.106

F820

7942AL Bush 7944AL Bush

2.36/0.093

Main

2M7942 Std. 010 020 030 040 050 060

2T7942 Std.

Thrust - Suits HJC23 crankshaft. 65.126/2.5640 84.760/3.3370 65.376/2.5739 85.010/3.3468

316

7942T

LISTER PETTER Type and Location

Standard Shaft Size

Max. Bearing Thickness

Housing Bore

ENGINE

VIN CYL

811cc (LD2) Diesel

Vertical Oil Clearance

Max. Overall Length

Bore x Stroke

Material Code

Qty. Set

Bearing Shell No.

Engine Set No. Sizes Available

TORQUE SETTINGS

76.2mm x 88.9mm

Rod 53.962/2.1245 53.975/2.1250

57.671/2.2705 57.683/2.2710

1.842/0.0725 .012/.0005 .063/.0025

31.88/1.255

F780

57.099/2.2480 57.112/2.2485

60.820/2.3945 60.846/2.3955

1.835/0.0722 .038/.0015 .093/.0037

44.57/1.755

57.099/2.2480 57.112/2.2485 57.099/2.2480 57.112/2.2485

60.820/2.3945 60.846/2.3955 60.820/2.3945 60.846/2.3955

1.835/0.0722 .038/.0015 .093/.0037 1.835/0.0722 .038/.0015 .093/.0037

31.87/1.255

F780

44.57/1.755

F23

64.770/2.5500 65.020/2.5598

79.930/3.1468 80.190/3.1571

2.36/0.093

F250

1B2561

2561 IH

Std. 010 020 030 040 050 060

2562 L

Std. 010 020 030 040 050 060

Main F780

3DM2562

2563 IH 7882 U

Thrust

Small End - not bored, single pieces. 25.395/0.9998 28.575/1.1250 25.403/1.0001 28.600/1.1260

ENGINE

28.70/1.130

2T7882

RB4089

Std.

Semi

VIN CYL

811cc (LR2) Diesel

F100

7882T U/L

Bore x Stroke

TORQUE SETTINGS

76.2mm x 88.9mm

Rod 53.962/2.1245 53.975/2.1250

57.671/2.2705 57.683/2.2710

1.842/0.0725 .012/.0005 .063/.0025

31.88/1.255

57.099/2.2480 57.112/2.2485 57.099/2.2480 57.112/2.2485

60.820/2.3945 60.846/2.3955 60.820/2.3945 60.846/2.3955

1.835/0.0722 .038/.0015 .103/.0041 1.835/0.0722 .038/.0015 .103/.0041

44.58/1.755

64.770/2.5500 65.020/2.5598

79.930/3.1468 80.190/3.1571

F780

2561 IH

1B2561 Std 010 020 030 040 050 060

Main F780

31.87/1.255

F780

2.36/0.093

F250

2567 U/L 2568 U/L

3M2567 Std. 010 020 030 040 050 060

Thrust

Small End - not bored, single pieces. 25.395/0.9998 28.575/1.1250 25.403/1.0001 28.600/1.1260

ENGINE

28.70/1.130

2T7882

RB4089

Std.

Semi

VIN CYL

816cc (LT2) Diesel

F100

7882T U/L

Bore x Stroke

TORQUE SETTINGS

82.55mm x 76.2mm

Rod 53.967/2.1247 53.980/2.1252

57.683/2.2710 57.696/2.2715

64.770/2.5500 65.020/2.5598

79.930/3.1468 80.190/3.1571

1.835/0.0722 .033/.0013 .085/.0033

22.10/0.870

F780

2546 IH

1B2546 Std. 010 020 030 040 050 060

Thrust 2.36/0.093

F250

7882T U/L

2T7882

RB4086

Std.

Small End - not bored, single pieces. 28.45/1.120

F100

Semi

ENGINE

VIN CYL

915cc (SL2) Diesel

Bore x Stroke

TORQUE SETTINGS

80.96mm x 88.9mm

Rod 53.962/2.1245 53.975/2.1250

57.671/2.2705 57.683/2.2710

1.842/0.0725 .012/.0005 .063/.0025

317

31.88/1.255

F780

2561 IH

1B2561 Std. 010 020 030 040 050 060

LISTER PETTER Engine Set No. Sizes Available

Type and Location

Max. Overall Length

Material Code

Qty. Set

Bearing Shell No.

1.835/0.0722 .038/.0015 .093/.0037

44.57/1.755

F780

2562 L

60.820/2.3945 60.846/2.3955

1.835/0.0722 .038/.0015 .093/.0037

31.87/1.255

F780

2563 IH

57.099/2.2480 57.112/2.2485

60.820/2.3945 60.846/2.3955

1.835/0.0722 .038/.0015 .093/.0037

44.57/1.755

F23

7882 U

64.770/2.5500 65.020/2.5598

79.930/3.1468 80.190/3.1571

2.36/0.093

F250

7882T U/L

Standard Shaft Size

Housing Bore

57.099/2.2480 57.112/2.2485

60.820/2.3945 60.846/2.3955

57.099/2.2480 57.112/2.2485

Max. Bearing Thickness

Vertical Oil Clearance

16 (Contâ&#x20AC;&#x2122;d.) Main

3DM2562 Std. 010 020 030 040 050 060

Thrust

2T7882 Std.

ENGINE

VIN CYL

953cc (LV2) Diesel

Bore x Stroke

TORQUE SETTINGS

85.73mm x 82.55mm

Rod

1B2546 Std. 010 020 030 040 050 060

53.967/2.1247 53.980/2.1252

57.683/2.2710 57.696/2.2715

64.770/2.5500 65.020/2.5598

79.930/3.1468 80.190/3.1571

1.835/0.0722 .033/.0013 .085/.0033

22.10/0.870

F780

2546 IH

2.36/0.093

F250

7882T U/L

Thrust

2T7882 Std.

ENGINE

VIN CYL

1104cc (SR2) Diesel 1104cc (SW2) Diesel

2 2

Bore x Stroke

TORQUE SETTINGS

88.9mm x 88.9mm 88.9mm x 88.9mm

Rod

1B2566 Std. .25 .50 .75 1.0 1.25 1.50

57.099/2.2480 57.112/2.2485

60.820/2.3945 60.846/2.3955

1.835/0.0722 .038/.0015 .103/.0041

31.88/1.255

F780

2566 IH

57.099/2.2480 57.112/2.2485

60.820/2.3945 60.846/2.3955

1.835/0.0722 .038/.0015 .103/.0041

44.58/1.755

F780

2567 U/L

57.099/2.2480 57.112/2.2485

60.820/2.3945 60.846/2.3955

1.835/0.0722 .038/.0015 .103/.0041

31.87/1.255

F780

2568 U/L

64.770/2.5500 65.020/2.5598

79.930/3.1468 80.190/3.1571

2.36/0.093

F250

7882T U/L

33.04/1.301

F100

RB4079

Main

3M2567 Std. 010 020 030 040 050 060

Thrust

2T7882 Std.

RB4079 Semi

Small End - not bored, single pieces. 32.651/1.2855 32.671/1.2863

ENGINE

VIN CYL

1106cc (AV2) Diesel 1106cc (AVA2) Diesel

2 2

Bore x Stroke

TORQUE SETTINGS

80mm x 110mm 80mm x 110mm

Rod

1B2901 Std. 010 020 030 040 050 060

3M7612 Std. 010 020 030 040 050 060

3M7614 Std. 010 020 030 040 050 060

53.970/2.1248 53.990/2.1256

58.738/2.3125 58.750/2.3130

Main - Suits up to engine no. 3132347. 57.099/2.2480 61.900/2.4370 57.112/2.2485 61.925/2.4380 57.137/2.2495 61.951/2.4390 57.163/2.2505 61.963/2.4395 Main - Suits engine no. 3132348 on. 57.099/2.2480 61.900/2.4370 57.112/2.2485 61.925/2.4380 57.137/2.2495 61.951/2.4390 57.163/2.2505 61.963/2.4395 57.099/2.2480 61.900/2.4370 57.112/2.2485 61.925/2.4380

2.365/0.0931 .018/.0007 .076/.0030

35.68/1.405

F780

2901 IH

2.369/0.0933

46.29/1.822

F23

2.378/0.0936 .032/.0013 .086/.0034

36.62/1.442

F23

7612 Bush 7613 IH

2.369/0.0933

46.29/1.822

F23

2.378/0.0936 .032/.0013 .086/.0034 2.369/0.0933

36.62/1.442

F23

54.10/2.130

F23

318

7612 Bush 7613 IH 7614 Bush

LISTER PETTER Type and Location

Standard Shaft Size

Max. Bearing Thickness

Housing Bore

Vertical Oil Clearance

Max. Overall Length

Material Code

Qty. Set

Bearing Shell No.

Engine Set No. Sizes Available

(Cont’d.)

Thrust 61.820/2.4339 62.078/2.4440

81.813/3.2210 82.067/3.2310

2.36/0.093

30.81/1.213

7612T

2T7612

F100

RB4003

RB4003 Semi

VIN CYL

1267cc (ST2) Diesel 1267cc (STW2) Diesel

Std.

Small End - not bored, single pieces. 30.000/1.1811 35.999/1.4173 (Nominal) 36.025/1.4183

ENGINE

2 2

Bore x Stroke

TORQUE SETTINGS

95.25mm x 88.9mm 95.25mm x 88.9mm

Rod 63.487/2.4995 63.500/2.5000

67.208/2.6460 67.221/2.6465

1.839/0.0724 .030/.0012 .082/.0032

31.75/1.250

Main - Position 1 & 3 (2 req’d per engine). 63.475/2.4990 67.196/2.6455 1.839/0.0724 .031/.0012 63.487/2.4995 67.221/2.6465 .094/.0037

44.45/1.750

Main - Centre Main (1 req’d per engine). 63.475/2.4990 67.196/2.6455 63.487/2.4995 67.221/2.6465

31.75/1.250

1.839/0.0724 .031/.0012 .094/.0037

F780

1B2550

2550 IH

Std. 010 020 030 040 050 060

2551 U/L

Std. 010 020 030 040 050 060

2552 U/L

Std. 010 020 030 040 050 060

1M2551

1M2552

Thrust 68.960/2.7150 69.210/2.7248

85.600/3.3701 85.850/3.3799

2.36/0.093

Small End - not bored, single pieces. 33.332/1.3123 36.512/1.4375 33.337/1.3125 36.538/1.4385

ENGINE

33.78/1.330

F100

1642T U/L

2T1642

RB4084

Std.

Semi

VIN CYL 2 2 2

1268cc (TS2) Diesel 1545cc (TR2) Diesel

F250

Bore x Stroke

TORQUE SETTINGS

95.3mm x 88.9mm 98.4mm x 101.6mm

Rod 63.487/2.4995 63.500/2.5000

67.208/2.6460 67.221/2.6465

1.835/0.0722 .038/.0015 .080/.0031

25.53/1.005

Main - Centre Bearing Housing. 63.475/2.4990 67.196/2.6455 63.487/2.4995 67.221/2.6465

1.839/0.0724 .031/.0012 .094/.0037

31.75/1.250

Main - Crankcase. 63.475/2.4990 63.487/2.4995

67.196/2.6455 67.221/2.6465

1.839/0.0724 .031/.0012 .094/.0037

31.75/1.250

Main - Main Bearing Housing. 63.475/2.4990 67.196/2.6455 63.487/2.4995 67.221/2.6465

1.839/0.0724 .031/.0012 .094/.0037

31.75/1.250

F780

1B2553

2553 IH

Std. 010 020 030 040 050 060

2552 U/L

Std. 010 020 030 040 050 060

2554 U/L

Std. 010 020 030 040 050 060

2559 U/L

Std. 010 020 030 040 050 060

1M2552

1M2554

1M2559

Thrust 72.000/2.8346 72.250/2.8445

91.900/3.6181 92.150/3.6279

2.36/0.093

Small End - not bored, single pieces. 33.332/1.3123 36.512/1.4375 33.337/1.3125 36.538/1.4385

ENGINE

64.033/2.5210 64.046/2.5215

F100

2555T U/L

1T2555

RB4084

Std.

Semi

VIN CYL

1317cc (PH2) Diesel 1317cc (PH2W/PHW2) Diesel 1317cc (PH2WM) Diesel Rod - 2 req’d per engine. 60.312/2.3745 60.325/2.3750

33.78/1.330

F250

2 2 2

Bore x Stroke

TORQUE SETTINGS

87.3mm x 110mm 87.3mm x 110mm 87.3mm x 110mm

1.834/0.0722 .040/.0016 .092/.0036

319

31.87/1.255

F780

2496 IH

1B2496 Std. 010 020 030 040 050 060

LISTER PETTER Engine Set No. Sizes Available

Type and Location

Max. Overall Length

Material Code

Qty. Set

Bearing Shell No.

2.369/0.0933 .050/.0020 .114/.0045

44.60/1.756

F820

7942AL Bush

64.033/2.5210 64.046/2.5215

1.822/0.0717 .064/.0025 .102/.0040

38.22/1.505

F820

7943AL IH

60.274/2.3730 60.287/2.3735

65.075/2.5620 65.100/2.5630

2.369/0.0933 .050/.0020 .114/.0045

53.50/2.106

F820

7944AL Bush

65.126/2.5640 65.376/2.5739

84.760/3.3370 85.010/3.3468

2.36/0.093

7942T

30.48/1.200

F100

RB4092

Standard Shaft Size

Housing Bore

60.274/2.3730 60.287/2.3735

65.075/2.5620 65.100/2.5630

60.312/2.3745 60.325/2.3750

Max. Bearing Thickness

Vertical Oil Clearance

22 (Cont’d.) Main

3M7942 Std. 010 020 030 040 050 060

Thrust

2T7942 Std.

RB4092 Semi

Small End - not bored, single pieces. 29.995/1.1809 33.338/1.3125 30.000/1.1811 33.363/1.3135

ENGINE

VIN CYL

1373cc (SL3) Diesel

1B2561 Std. 010 020 030 040 050 060

Rod - 3 req’d per engine. 53.962/2.1245 57.671/2.2705 53.975/2.1250 57.683/2.2710

Bore x Stroke

TORQUE SETTINGS

80.96mm x 88.9mm

1.842/0.0725 .012/.0005 .063/.0025

31.88/1.255

F780

2561 IH

Main

4DM2562 Std. 010 020 030 040 050 060

57.099/2.2480 57.112/2.2485

60.820/2.3945 60.846/2.3955

1.835/0.0722 .038/.0015 .093/.0037

44.57/1.755

F780

2562 L

57.099/2.2480 57.112/2.2485 57.099/2.2480 57.112/2.2485

60.820/2.3945 60.846/2.3955 60.820/2.3945 60.846/2.3955

1.835/0.0722 .038/.0015 .093/.0037 1.835/0.0722 .038/.0015 .093/.0037

31.87/1.255

F780

44.57/1.755

F23

2563 IH 7882 U

64.770/2.5500 65.020/2.5598

79.930/3.1468 80.190/3.1571

2.36/0.093

F250

7882T U/L

Thrust

2T7882 Std.

ENGINE

VIN CYL

1596cc (TX2) Diesel

1B2560 Std. 010 020 030 040

1M2552 Std. 010 020 030 040 050 060

1M2554 Std. 010 020 030 040 050 060

1M2559 Std. 010 020 030 040 050 060

Bore x Stroke

TORQUE SETTINGS

100mm x 101.6mm

Rod - 2 req’d per engine. 63.487/2.4995 67.208/2.6460 63.500/2.5000 67.221/2.6465

1.835/0.0722 .038/.0015 .084/.0033

25.53/1.005

F780

2560 U/L

Main - Centre Bearing Housing. 63.475/2.4990 67.196/2.6455 63.487/2.4995 67.221/2.6465

1.839/0.0724 .031/.0012 .094/.0037

31.75/1.250

F780

2552 U/L

Main - Crankcase. 63.475/2.4990 63.487/2.4995

67.196/2.6455 67.221/2.6465

1.839/0.0724 .031/.0012 .094/.0037

31.75/1.250

F780

2554 U/L

Main - Main Bearing Housing. 63.475/2.4990 67.196/2.6455 63.487/2.4995 67.221/2.6465

1.839/0.0724 .031/.0012 .094/.0037

31.75/1.250

F780

2559 U/L

2.36/0.093

F250

2555T U/L

33.78/1.330

F100

RB4084

2496 IH

Thrust

1T2555 Std.

RB4084 Semi

72.000/2.8346 72.250/2.8445

Small End - not bored, single pieces. 33.332/1.3123 36.512/1.4375 33.337/1.3125 36.538/1.4385

ENGINE

VIN CYL

1620cc (PJ2) Diesel 1620cc (PJ2W) Diesel

1B2496 Std. 010 020 030 040 050 060

91.900/3.6181 92.150/3.6279

2 2

Rod - 2 req’d per engine. 60.312/2.3745 64.033/2.5210 60.325/2.3750 64.046/2.5215

Bore x Stroke

TORQUE SETTINGS

96.83mm x 109.98mm 96.83mm x 109.98mm

1.834/0.0722 .040/.0016 .092/.0036

320

31.87/1.255

F780

LISTER PETTER Type and Location

Standard Shaft Size

Max. Bearing Thickness

Housing Bore

Vertical Oil Clearance

Max. Overall Length

Material Code

Qty. Set

Bearing Shell No.

Engine Set No. Sizes Available

(Cont’d.) Main - Suits engines with HJC8 flywheel end. 60.274/2.3730 65.075/2.5620 2.369/0.0933 .050/.0020 60.287/2.3735 65.100/2.5630 .114/.0045

44.60/1.756

F820

7942AL Bush

60.312/2.3745 60.325/2.3750

64.033/2.5210 64.046/2.5215

1.822/0.0717 .064/.0025 .102/.0040

38.22/1.505

F820

7943AL IH

60.274/2.3730 60.287/2.3735

65.075/2.5620 65.100/2.5630

2.369/0.0933 .050/.0020 .114/.0045

53.50/2.106

F820

7944AL Bush

2.36/0.093

7942T

Thrust - Suits HJC23 crankshaft. 65.126/2.5640 84.760/3.3370 65.376/2.5739 85.010/3.3468

ENGINE

Rod - 2 req’d per engine. 60.312/2.3745 60.325/2.3750

3M7942 Std. 010 020 030 040 050 060

2T7942 Std.

VIN CYL

1620cc (PJ2Z) Diesel 1620cc (PJ2ZW) Diesel

2 2

Bore x Stroke

TORQUE SETTINGS

96.83mm x 109.98mm 96.83mm x 109.98mm

64.033/2.5210 64.046/2.5215

1.834/0.0722 .040/.0016 .092/.0036

31.87/1.255

65.075/2.5620 65.100/2.5630 64.033/2.5210 64.046/2.5215 65.075/2.5620 65.100/2.5630

2.369/0.0933 .050/.0020 .114/.0045 1.822/0.0717 .064/.0025 .102/.0040 2.369/0.0933 .050/.0020 .114/.0045

44.60/1.756

F780

2496 IH

1B2496 Std. 010 020 030 040 050 060

Main 60.274/2.3730 60.287/2.3735 60.312/2.3745 60.325/2.3750 60.274/2.3730 60.287/2.3735

Thrust - Suits HJC23 crankshaft. 65.126/2.5640 84.760/3.3370 65.376/2.5739 85.010/3.3468

ENGINE

Rod - 3 req’d per engine. 57.099/2.2480 57.112/2.2485

38.22/1.505

F820

53.50/2.106

F820

2.36/0.093

7942AL Bush 7943AL IH 7944AL Bush 7942T

3M7942 Std. 010 020 030 040 050 060

2T7942 Std.

VIN CYL

1655cc (SR3) Diesel

F820

Bore x Stroke

TORQUE SETTINGS

88.9mm x 88.9mm

60.820/2.3945 60.846/2.3955

1.835/0.0722 .038/.0015 .103/.0041

31.88/1.255

57.099/2.2480 57.112/2.2485 57.099/2.2480 57.112/2.2485

60.820/2.3945 60.846/2.3955 60.820/2.3945 60.846/2.3955

1.835/0.0722 .038/.0015 .103/.0041 1.835/0.0722 .038/.0015 .103/.0041

44.58/1.755

64.770/2.5500 65.020/2.5598

79.930/3.1468 80.190/3.1571

F780

2566 IH

1B2566 Std. .25 .50 .75 1.0 1.25 1.50

Main F780

31.87/1.255

F780

2.36/0.093

F250

2567 U/L 2568 U/L

4M2567 Std. 010 020 030 040 050 060

Thrust

Small End - not bored, single pieces. 32.651/1.2855 32.671/1.2863

ENGINE

2 2 2

70.879/2.7905 70.891/2.7910

F100

2T7882

RB4079

Std.

Semi

VIN CYL

1855cc (HA2) Diesel 1855cc (HB2) Diesel 1855cc (HW2) Diesel Rod - 2 req’d per engine. 66.637/2.6235 66.650/2.6240

33.04/1.301

7882T U/L

Bore x Stroke

TORQUE SETTINGS

101.65mm x 114.3mm 101.65mm x 114.3mm 101.65mm x 114.3mm

2.092/0.0824 .045/.0018 .096/.0038

38.22/1.505

Main - Position 1 & 3 (2 req’d per engine). 76.175/2.9990 80.416/3.1660 2.092/0.0824 .045/.0018 76.187/2.9995 80.442/3.1670 .109/.0043

38.22/1.505

Main - Centre Bearing (1 req’d per engine). 76.175/2.9990 80.416/3.1660 2.092/0.0824 .045/.0018 76.187/2.9995 80.442/3.1670 .109/.0043

38.22/1.505

321

F780

1B2530

2530 IH

Std. 010 020 030 040 050 060

2533 U/L

Std. 010 020 030 040 050 060

2534 U/L

Std. 010 020 030 040 050 060

1M2533

1M2534

LISTER PETTER Engine Set No. Sizes Available

Type and Location

Standard Shaft Size

Housing Bore

83.330/3.2807 83.590/3.2909

98.750/3.8878 99.010/3.8980

Max. Bearing Thickness

Vertical Oil Clearance

Max. Overall Length

Material Code

Qty. Set

Bearing Shell No.

2.36/0.093

F250

2534T U/L

36.75/1.447

F100

RB4083

28 (Cont’d.) Thrust

2T2534 Std.

RB4083 Semi

Small End - not bored, single pieces. 36.507/1.4373 40.480/1.5937 36.515/1.4376 40.513/1.5950

ENGINE

VIN CYL

1900cc (ST3) Diesel 1900cc (STW3) Diesel

1B2550 Std. 010 020 030 040 050 060

1M2551 Std. 010 020 030 040 050 060

1M2552 Std. 010 020 030 040 050 060

3 3

Rod - 3 req’d per engine. 63.487/2.4995 67.208/2.6460 63.500/2.5000 67.221/2.6465

Bore x Stroke

TORQUE SETTINGS

95.25mm x 88.9mm 95.25mm x 88.9mm

1.839/0.0724 .030/.0012 .082/.0032

31.75/1.250

F780

2550 IH

Main - Position 1 & 4 (2 req’d per engine). 63.475/2.4990 67.196/2.6455 1.839/0.0724 .031/.0012 63.487/2.4995 67.221/2.6465 .094/.0037

44.45/1.750

F780

2551 U/L

Main - Centre Bearing (2 req’d per engine). 63.475/2.4990 67.196/2.6455 1.839/0.0724 .031/.0012 63.487/2.4995 67.221/2.6465 .094/.0037

31.75/1.250

F780

2552 U/L

2.36/0.093

F250

1642T U/L

33.78/1.330

F100

RB4084

Thrust

2T1642

68.960/2.7150 69.210/2.7248

Std.

RB4084 Semi

Small End - not bored, single pieces. 33.332/1.3123 36.512/1.4375 33.337/1.3125 36.538/1.4385

ENGINE

VIN CYL

1902cc (TS3) Diesel 2318cc (TR3) Diesel

1B2553 Std. 010 020 030 040 050 060

1M2552 Std. 010 020 030 040 050 060

1M2554 Std. 010 020 030 040 050 060

1M2559 Std. 010 020 030 040 050 060

85.600/3.3701 85.850/3.3799

3 3 3

Rod - 3 req’d per engine. 63.487/2.4995 67.208/2.6460 63.500/2.5000 67.221/2.6465

Bore x Stroke

TORQUE SETTINGS

95.3mm x 88.9mm 98.4mm x 101.6mm

1.835/0.0722 .038/.0015 .080/.0031

25.53/1.005

F780

2553 IH

Main - Centre Bearing Housing (2 req’d per engine). 63.475/2.4990 67.196/2.6455 1.839/0.0724 .031/.0012 63.487/2.4995 67.221/2.6465 .094/.0037

31.75/1.250

F780

2552 U/L

Main - Crankcase. 63.475/2.4990 63.487/2.4995

67.196/2.6455 67.221/2.6465

1.839/0.0724 .031/.0012 .094/.0037

31.75/1.250

F780

2554 U/L

Main - Main Bearing Housing. 63.475/2.4990 67.196/2.6455 63.487/2.4995 67.221/2.6465

1.839/0.0724 .031/.0012 .094/.0037

31.75/1.250

F780

2559 U/L

2.36/0.093

F250

2555T U/L

33.78/1.330

F100

RB4084

2540 IH

Thrust

1T2555 Std.

RB4084 Semi

72.000/2.8346 72.250/2.8445

Small End - not bored, single pieces. 33.332/1.3123 36.512/1.4375 33.337/1.3125 36.538/1.4385

ENGINE

VIN CYL

2092cc (HR2) Diesel 2092cc (HR2G) Diesel 2092cc (HRW2) Diesel

1B2540 Std. 010 020 030 040 050 060

91.900/3.6181 92.150/3.6279

2 2 2

Rod - 2 req’d per engine. 69.817/2.7487 74.054/2.9155 69.830/2.7492 74.066/2.9160

Bore x Stroke

TORQUE SETTINGS

107.95mm x 114.3mm 107.95mm x 114.3mm 107.95mm x 114.3mm

2.089/0.0822 .046/.0018 .097/.0038

322

36.63/1.442

F780

LISTER PETTER Type and Location

Standard Shaft Size

Max. Bearing Thickness

Housing Bore

Vertical Oil Clearance

Max. Overall Length

Material Code

Qty. Set

Bearing Shell No.

Engine Set No. Sizes Available

(Cont’d.) Main - Position 1 & 3 (2 req’d per engine). 82.525/3.2490 86.766/3.4160 2.089/0.0822 .051/.0020 82.537/3.2495 86.792/3.4170 .115/.0045

36.63/1.442

Main - Centre Bearing (1 req’d per engine). 82.525/3.2490 86.766/3.4160 2.089/0.0822 .050/.0020 82.537/3.2495 86.792/3.4170 .115/.0045

36.62/1.442

F780

1M2544

2544 U/L

Std. 010 020 030 040 050 060

2545 U/L

Std. 010 020 030 040 050 060

1M2545

Thrust 91.310/3.5949 91.690/3.6098

112.340/4.4228 112.720/4.4378

3.17/0.125

Small End - not bored, single pieces. 39.688/1.5625 43.657/1.7188 39.683/1.5623 43.692/1.7202

ENGINE

67.208/2.6460 67.221/2.6465

F100

2545T U/L

2T2545

RB4085

Std.

Semi

VIN CYL

2394cc (TX3) Diesel Rod - 3 req’d per engine. 63.487/2.4995 63.500/2.5000

36.40/1.433

F250

Bore x Stroke

TORQUE SETTINGS

100mm x 101.6mm

1.835/0.0722 .038/.0015 .084/.0033

25.53/1.005

Main - Centre Bearing Housing (2 req’d per engine). 63.475/2.4990 67.196/2.6455 1.839/0.0724 .031/.0012 63.487/2.4995 67.221/2.6465 .094/.0037

31.75/1.250

Main - Crankcase. 63.475/2.4990 63.487/2.4995

67.196/2.6455 67.221/2.6465

1.839/0.0724 .031/.0012 .094/.0037

31.75/1.250

Main - Main Bearing Housing. 63.475/2.4990 67.196/2.6455 63.487/2.4995 67.221/2.6465

1.839/0.0724 .031/.0012 .094/.0037

31.75/1.250

F780

1B2560

2560 U/L

Std. 010 020 030 040

2552 U/L

Std. 010 020 030 040 050 060

2554 U/L

Std. 010 020 030 040 050 060

2559 U/L

Std. 010 020 030 040 050 060

1M2552

1M2554

1M2559

Thrust 72.000/2.8346 72.250/2.8445

91.900/3.6181 92.150/3.6279

2.36/0.093

Small End - not bored, single pieces. 39.688/1.5625 43.657/1.7188 39.683/1.5623 43.692/1.7202

ENGINE

36.40/1.433

F100

2555T U/L

1T2555

RB4085

Std.

Semi

VIN CYL

1596cc (P600/2) Diesel 2394cc (P600/3) Diesel

F250

2 3

Bore x Stroke

TORQUE SETTINGS

100mm x 101.6mm 100mm x 101.6mm

Rod 63.487/2.4995 63.500/2.5000

67.208/2.6460 67.221/2.6465

72.000/2.8346 72.250/2.8445

91.900/3.6181 92.150/3.6279

1.835/0.0722 .038/.0015 .080/.0031

25.53/1.005

F780

2553 IH

1B2553 Std. 010 020 030 040 050 060

Thrust

ENGINE

2.36/0.093

VIN CYL

2429cc (PJ3) Diesel 2429cc (PJ3W) Diesel 3239cc (PJ4) Diesel 3239cc (PJ4W) Diesel

3 3 4 4

Bore x Stroke

F250

2555T U/L

1T2555 Std.

TORQUE SETTINGS

96.82mm x 109.98mm 96.82mm x 109.98mm 96.82mm x 109.98mm 96.82mm x 109.98mm

Rod 60.312/2.3745 60.325/2.3750

64.033/2.5210 64.046/2.5215

1.834/0.0722 .040/.0016 .092/.0036

Thrust - Suits HJC23 crankshaft. 65.126/2.5640 84.760/3.3370 65.376/2.5739 85.010/3.3468

31.87/1.255

2.36/0.093

F780

1B2496

2496 IH

Std. 010 020 030 040 050 060

7942T

2T7942 Std.

323

LISTER PETTER Engine Set No. Sizes Available

Type and Location

Standard Shaft Size

ENGINE

VIN CYL

2783cc (HA3) Diesel 2783cc (HB3) Diesel 2783cc (HW3) Diesel

1B2530 Std. 010 020 030 040 050 060

1M2533 Std. 010 020 030 040 050 060

1M2534 Std. 010 020 030 040 050 060

Housing Bore

3 3 3

Rod - 3 req’d per engine. 66.637/2.6235 70.879/2.7905 66.650/2.6240 70.891/2.7910

Max. Bearing Thickness

Vertical Oil Clearance

Bore x Stroke

Max. Overall Length

Material Code

Qty. Set

Bearing Shell No.

TORQUE SETTINGS

101.65mm x 114.3mm 101.65mm x 114.3mm 101.65mm x 114.3mm

2.092/0.0824 .045/.0018 .096/.0038

38.22/1.505

F780

2530 IH

Main - Position 1 & 4 (2 req’d per engine). 76.175/2.9990 80.416/3.1660 2.092/0.0824 .045/.0018 76.187/2.9995 80.442/3.1670 .109/.0043

38.22/1.505

F780

2533 U/L

Main - Centre Bearing (2 req’d per engine). 76.175/2.9990 80.416/3.1660 2.092/0.0824 .045/.0018 76.187/2.9995 80.442/3.1670 .109/.0043

38.22/1.505

F780

2534 U/L

2.36/0.093

F250

2534T U/L

36.75/1.447

F100

RB4083

Thrust

2T2534

83.330/3.2807 83.590/3.2909

Std.

RB4083 Semi

Small End - not bored, single pieces. 36.507/1.4373 40.480/1.5937 36.515/1.4376 40.513/1.5950

ENGINE

VIN CYL

3138cc (HR3) Diesel 3138cc (HR3G) Diesel 3138cc (HRW3) Diesel

1B2540 Std. 010 020 030 040 050 060

1M2544 Std. 010 020 030 040 050 060

1M2545 Std. 010 020 030 040 050 060

98.750/3.8878 99.010/3.8980

3 3 3

Rod - 3 req’d per engine. 69.817/2.7487 74.054/2.9155 69.830/2.7492 74.066/2.9160

Bore x Stroke

TORQUE SETTINGS

107.95mm x 114.3mm 107.95mm x 114.3mm 107.95mm x 114.3mm

2.089/0.0822 .046/.0018 .097/.0038

36.63/1.442

F780

2540 IH

Main - Position 1 & 4 (2 req’d per engine). 82.525/3.2490 86.766/3.4160 2.089/0.0822 .051/.0020 82.537/3.2495 86.792/3.4170 .115/.0045

36.63/1.442

F780

2544 U/L

Main - Centre Bearing (2 req’d per engine). 82.525/3.2490 86.766/3.4160 2.089/0.0822 .050/.0020 82.537/3.2495 86.792/3.4170 .115/.0045

36.62/1.442

F780

2545 U/L

3.17/0.125

F250

2545T U/L

36.40/1.433

F100

RB4085

Thrust

2T2545

91.310/3.5949 91.690/3.6098

Std

RB4085 Semi

Small End - not bored, single pieces. 39.688/1.5625 43.657/1.7188 39.683/1.5623 43.692/1.7202

ENGINE

VIN CYL

3138cc (HL3) Diesel

1B2540 Std. 010 020 030 040 050 060

1M2545 Std. 010 020 030 040 050 060

112.340/4.4228 112.720/4.4378

Rod - 3 req’d per engine. 69.817/2.7487 74.054/2.9155 69.830/2.7492 74.066/2.9160

Bore x Stroke

TORQUE SETTINGS

107.95mm x 114.3mm

2.089/0.0822 .046/.0018 .097/.0038

Main - All positions (4 req’d per engine). 82.525/3.2490 86.766/3.4160 2.089/0.0822 .050/.0020 82.537/3.2495 86.792/3.4170 .115/.0045

36.63/1.442

F780

2540 IH

36.62/1.442

F780

2545 U/L

3.17/0.125

F250

2545T U/L

36.40/1.433

F100

RB4085

Thrust

2T2545 Std.

RB4085 Semi

91.310/3.5949 91.690/3.6098

112.340/4.4228 112.720/4.4378

Small End - not bored, single pieces. 39.688/1.5625 43.657/1.7188 39.683/1.5623 43.692/1.7202

324

LISTER PETTER Type and Location

Standard Shaft Size

ENGINE

Max. Bearing Thickness

Housing Bore

VIN CYL

3710cc (HA4) Diesel 3710cc (HB4) Diesel 3710cc (HW4) Diesel Rod - 4 req’d per engine. 66.637/2.6235 66.650/2.6240

4 4 4

Vertical Oil Clearance

Max. Overall Length

Bore x Stroke

Material Code

Qty. Set

Bearing Shell No.

Engine Set No. Sizes Available

TORQUE SETTINGS

101.65mm x 114.3mm 101.65mm x 114.3mm 101.65mm x 114.3mm

70.879/2.7905 70.891/2.7910

2.092/0.0824 .045/.0018 .096/.0038

38.22/1.505

Main - All positions (5 req’d per engine). 76.175/2.9990 80.416/3.1660 76.187/2.9995 80.442/3.1670

2.092/0.0824 .045/.0018 .109/.0043

38.22/1.505

F780

1B2530

2530 IH

Std. 010 020 030 040 050 060

2534 U/L

Std. 010 020 030 040 050 060

1M2534

Thrust 83.330/3.2807 83.590/3.2909

98.750/3.8878 99.010/3.8980

2.36/0.093

Small End - not bored, single pieces. 36.507/1.4373 40.480/1.5937 36.515/1.4376 40.513/1.5950

ENGINE

F100

2534T U/L

2T2534

RB4083

Std.

Semi

VIN CYL

4184cc (HL4) Diesel 4184cc (HR4) Diesel 4184cc (HRW4) Diesel Rod - 4 req’d per engine. 69.817/2.7487 69.830/2.7492

36.75/1.447

F250

4 4 4

Bore x Stroke

TORQUE SETTINGS

107.95mm x 114.3mm 107.95mm x 114.3mm 107.95mm x 114.3mm

74.054/2.9155 74.066/2.9160

2.089/0.0822 .046/.0018 .097/.0038

36.63/1.442

Main - All positions (5 req’d per engine). 82.525/3.2490 86.766/3.4160 82.537/3.2495 86.792/3.4170

2.089/0.0822 .050/.0020 .115/.0045

36.62/1.442

F780

1B2540

2540 IH

Std. 010 020 030 040 050 060

2545 U/L

Std. 010 020 030 040 050 060

1M2545

Thrust 91.310/3.5949 91.690/3.6098

112.340/4.4228 112.720/4.4378

3.17/0.125

Small End - not bored, single pieces. 39.688/1.5625 43.657/1.7188 39.683/1.5623 43.692/1.7202

ENGINE

F100

2545T U/L

2T2545

RB4085

Std.

Semi

VIN CYL

5565cc (HA6) Diesel 5565cc (HB6) Diesel 5565cc (HW6) Diesel Rod - 6 req’d per engine. 66.637/2.6235 66.650/2.6240

36.40/1.433

F250

6 6 6

Bore x Stroke

TORQUE SETTINGS

101.65mm x 114.3mm 101.65mm x 114.3mm 101.65mm x 114.3mm

70.879/2.7905 70.891/2.7910

2.092/0.0824 .045/.0018 .096/.0038

38.22/1.505

Main - All positions (7 req’d per engine). 76.175/2.9990 80.416/3.1660 76.187/2.9995 80.442/3.1670

2.092/0.0824 .045/.0018 .109/.0043

38.22/1.505

F780

1B2530

2530 IH

Std. 010 020 030 040 050 060

2534 U/L

Std. 010 020 030 040 050 060

1M2534

Thrust 83.330/3.2807 83.590/3.2909

98.750/3.8878 99.010/3.8980

2.36/0.093

Small End - not bored, single pieces. 36.507/1.4373 40.480/1.5937 36.515/1.4376 40.513/1.5950

36.75/1.447

F250

F100

2534T U/L

2T2534

RB4083

Std.

Semi

325

LISTER PETTER Engine Set No. Sizes Available

Type and Location

Standard Shaft Size

ENGINE

VIN CYL

6277cc (HL6) Diesel 6277cc (HLT6) Diesel 6277cc (HR6) Diesel 6277cc (HRS6) Diesel 6277cc (HRW6) Diesel 6277cc (HRWS6) Diesel

1B2540 Std. 010 020 030 040 050 060

1M2545 Std. 010 020 030 040 050 060

Housing Bore

6 6 6 6 6 6

Rod - 6 req’d per engine. 69.817/2.7487 74.054/2.9155 69.830/2.7492 74.066/2.9160

Max. Bearing Thickness

Vertical Oil Clearance

Bore x Stroke

Max. Overall Length

Material Code

Qty. Set

Bearing Shell No.

TORQUE SETTINGS

107.95mm x 114.3mm 107.95mm x 114.3mm 107.95mm x 114.3mm 107.95mm x 114.3mm 107.95mm x 114.3mm 107.95mm x 114.3mm

2.089/0.0822 .046/.0018 .097/.0038

Main - All positions (7 req’d per engine). 82.525/3.2490 86.766/3.4160 2.089/0.0822 .050/.0020 82.537/3.2495 86.792/3.4170 .115/.0045

36.63/1.442

F780

2540 IH

36.62/1.442

F780

2545 U/L

3.17/0.125

F250

2545T U/L

36.40/1.433

F100

RB4085

Thrust

2T2545 Std.

RB4085 Semi

91.310/3.5949 91.690/3.6098

112.340/4.4228 112.720/4.4378

Small End - not bored, single pieces. 39.688/1.5625 43.657/1.7188 39.683/1.5623 43.692/1.7202

326

LOTUS LOTUS ENGINE INDEX Engine Disp.

Notation

VIN

Cyl.

95 1558cc (1.6).....

Year Line Engine Disp. 62-75

Notation

VIN

Cyl.

Year Line

LOTUS MODEL INDEX Model ELAN ELAN - 2 ELAN - 2S ELAN - 2S 130 ELAN - S4 Type and Location

CID

Liter

95 95 95 95 95

1558 1558 1558 1558 1558

1.6 1.6 1.6 1.6 1.6

Standard Shaft Size

ENGINE

Description

Years 62-75 68-74 69-70 72-74 68-71

Max. Bearing Thickness

Housing Bore

VIN CYL

95 1558cc (1.6)

Rod - Race Series bearing. 49.200/1.9370 52.896/2.0825 49.212/1.9375 52.908/2.0830

Model

CID

Liter

95 95 95 95 95

1558 1558 1558 1558 1558

1.6 1.6 1.6 1.6 1.6

ELAN - SPRINT EUROPA EUROPA - SPECIAL EUROPA - TWIN SEVEN

Vertical Oil Clearance

Max. Overall Length

Bore x Stroke

Material Code

Qty. Set

Description

Years 71-73 71-75 72 72-74 69-70

Bearing Shell No.

Engine Set No. Sizes Available

TORQUE SETTINGS

82.5mm x 72.8mm

1.830/0.0720 .024/.0009 .064/.0025

22.35/0.880

F781

5216H U/L

Rod - Race Series bearing. Bearings are 0.0005" thinner per half to give 0.001" extra clearance for standard sized crankshafts. 49.200/1.9370 52.896/2.0825 1.817/0.0715 .049/.0019 22.35/0.880 F781 8 5216HX 49.212/1.9375 52.908/2.0830 .089/.0035 U/L

4B603H Std. 001 010 020

4B603HX Std.

Rod 49.200/1.9370 49.212/1.9375

52.896/2.0825 52.908/2.0830

1.835/0.0722 .015/.0006 .064/.0025

22.35/0.880

Main - Race Series bearing. 53.988/2.1255 57.683/2.2710 1-5 54.000/2.1260 57.696/2.2715

1.831/0.0721 .021/.0008 .062/.0024

25.52/1.005

F780

Std. 10 20 30 40

2152H IH

Std. 001 010 020

Main - Race Series bearing. Bearings are 0.0005" thinner per half to give 0.001" extra clearance for standard sized crankshafts. 53.988/2.1255 57.683/2.2710 1.818/0.0716 .046/.0018 25.52/1.005 F780 10 2152HX 1-5 54.000/2.1260 57.696/2.2715 .087/.0034 IH Main 1-5

53.988/2.1255 54.000/2.1260

57.683/2.2710 57.696/2.2715

59.436/2.3400 59.690/2.3500

74.498/2.9330 74.752/2.9430

Cam Tower 25.400/1.0000 25.412/1.0005

28.587/1.1255 28.800/1.1339

1.584/0.0624 .007/.0003 .048/.0019

19.18/0.755

F23

5808 IH

25.400/1.0000 25.412/1.0005

28.587/1.1255 28.600/1.1260

1.584/0.0624 .007/.0003 .048/.0019

12.82/0.505

F23

5809 IH

Thrust 3

1.840/0.0724 .013/.0005 .056/.0022

25.53/1.005

2.36/0.093

327

F780

F250

4B603P

5216 IH

5M2152H

5M2152HX Std.

5M742P

2152 IH

Std. 10 20 30 40

2152T IH

Std. +.005

1T113S

10C5808 Std.

MAZDA MAZDA ENGINE INDEX Engine Disp. 1272cc (1.3)......... 1296cc (1.3)......... 1323cc (1.3)......... 1415cc (1.4)......... 1484cc (1.5)......... 1489cc (1.5)......... 1490cc (1.5)......... 1490cc (1.5)......... 1498cc (1.5)......... 1586cc (1.6)......... 1587cc (1.6)......... 1589cc (1.6)......... 1597cc (1.6)......... 1597cc (1.6)......... 1597cc (1.6)......... 1597cc (1.6)......... 1769cc (1.8)......... 1789cc (1.8)......... 1796cc (1.8)......... 1839cc (1.8)......... 1839cc (1.8)......... 1839cc (1.8)......... 1845cc (1.8)......... 1970cc (2.0)......... 1985cc (2.0)......... 1991cc (2.0)......... 1991cc (2.0)......... 1998cc (2.0)......... 1998cc (2.0)......... 1998cc (2.0).........

Notation

VIN

TC E3 B3 UC UA Z5 DOHC E5 (D5) B5 NA F6 16V DOHC (B6Y) DOHC (B6) SOHC & DOHC (B6) SOHC (B6) DOHC (B6T), Turbo VC F8 VB DOHC (BP) SOHC & DOHC (BP) (FP) K8 MA VA DOHC (Zetec) FS RF20,Diesel FE SOHC FE DOHC, Turbo

Cyl. L4 L4 L4 L4 L4 L4 L4 L4 L4 L4 L4 L4 L4 L4 L4 L4 L4 L4 L4 L4 L4 L4 V6 L4 L4 L4 L4 L4 L4 L4

Year Line Engine Disp. 76-78 80-88 87-89 79-80 71-77 95-98 81-86 81-86 90-90 70-77 82-88 99-01 95-96 90-94 86-89 88-89 73-88 82-88 72-78 95-02 90-94 99-00 92-95 79-84 71-79 01-04 93-02 84-87 83-88 88-90

1 2 3 1 4 5 2 2 3 6 7 8 8 8 8 8 6 7 9 8 8 12 10 9 11 15 12 13 7 14

1998cc (2.0)......... 2000cc (2.0)......... 2000cc (2.0)......... 2184cc (2.2)......... 2184cc (2.2)......... 2184cc (2.2)......... 2209cc (2.2)......... 2254cc (2.3)......... 2260cc (2.3)......... 2295cc (2.3)......... 2492cc (2.5)......... 2497cc (2.5)......... 2497cc (2.5)......... 2555cc (2.6)......... 2606cc (2.6)......... 2954cc (3.0)......... 2954cc (3.0)......... 2954cc (3.0)......... 2954cc (3.0)......... 2968cc (3.0)......... 2977cc (3.0)......... 2983cc (3.0)......... 183 (3.0) ............... 3455cc (3.5)......... 3455cc (3.5)......... 3784cc (3.8)......... 4016cc (4.0)......... 4016cc (4.0)......... 4052cc (4.0)......... 4052cc (4.0).........

Notation

VIN

FE SOHC, Turbo Duratec FS R2,Diesel F2 SOHC F2 SOHC, Turbo S2,Diesel KJ, Supercharged Duratec OHC (Ford Eng.) OHC (Ford Eng.) KL KL AM1 (Mits. G54B) G6 SOHC Duratec JE SOHC JE SOHC & DOHC OHV (Ford Eng.) Duratec HA,Diesel OHV (Ford Eng.) Duratec SL,Diesel SL, Turbo,Diesel YA,Diesel SOHC (Ford Eng.) OHV (Ford Eng.) XB,Diesel ZB,Diesel

A C 1

U U

E X

Cyl. L4 L4 L4 L4 L4 L4 L4 V6 L4 L4 L4 V6 V6 L4 L4 V6 V6 V6 V6 V6 L4 V6 V6 L4 L4 L6 V6 V6 L6 L6

Year Line 86-87 04-05 01-03 83-88 87-93 88-92 79-88 95-02 03-06 94-97 98-01 93-02 96-96 87-88 89-94 01-04 88-98 90-95 98-05 03-05 77-90 94-96 02-05 84-90 84-90 69-74 01-05 91-00 72-80 72-88

7 16 12 13 7 7 17 18 20 19 19 18 18 21 22 25 23 23 24 25 26 24 25 26 26 28 29 27 28 28

MAZDA MODEL INDEX Model

Liter

2497 1586 2000 2260 2000 2260 2260 1597 1597 1597 1597 1839

2.5 1.6 2.0 2.3 2.0 2.3 2.3 1.6 1.6 1.6 1.6 1.8

323 - LX

1839

1.8

323 - SE 5 - SPORT 5 - TOURING 6

1597 2260 2260 2260 2968 2260 2968 1586 1796 1970 1991 1991 1998 1998 2184 2497 1991 2184 1991 1991 2497 2184 2184 1991 1991 2184 2497 2954 2954

1.6 2.3 2.3 2.3 3.0 2.3 3.0 1.6 1.8 2.0 2.0 2.0 2.0 2.0 2.2 2.5 2.0 2.2 2.0 2.0 2.5 2.2 2.2 2.0 2.0 2.2 2.5 3.0 3.0

1200 3 3-I 3-S 3 - SP23 323 323 - DX

6-I 6-S 616 618 626

626 - DX 626 - ES 626 - GT 626 - LE 626 - LX

929

CID

Description KL NA Duratec Duratec Duratec Duratec Duratec DOHC SOHC & DOHC (B6) SOHC (B6) SOHC & DOHC (B6) SOHC & DOHC (BP) SOHC & DOHC (BP) SOHC & DOHC (B6) Duratec Duratec Duratec Duratec Duratec Duratec NA VB MA DOHC (Zetec) FS FE SOHC RF20 F2 SOHC KL FS F2 SOHC DOHC (Zetec) FS KL F2 SOHC F2 SOHC DOHC (Zetec) FS F2 SOHC KL JE SOHC JE SOHC & DOHC

Years

Model

96 71 04 04 05 05-06 05 88-89 90-94 86-89 92-94 90-91

929 - S B1600 B1800 B2000

90-91

B4000

90-93 06 06 03-04 03-04 05-06 05 71 72 79-83 01 99-01 84-87 84-85 88-92 99-01 93-98 90-92 02 02 93-02 90-91 91 02 93-02 90-92 94-02 88-89 90-95

GLC

CID

B2200 B2300 B2500 B2600 B3000

MIATA

MIATA - LS MILLENIA MILLENIA - L MILLENIA - S MIZER MPV

Liter

2954 1586 1796 1970 1998 2184 2209 2295 2492 2555 2606 2954 2983 4016 4016 1272 1415 1490 1597 1839 1839

3.0 1.6 1.8 2.0 2.0 2.2 2.2 2.3 2.5 2.6 2.6 3.0 3.0 4.0 4.0 1.3 1.4 1.5 1.6 1.8 1.8

1839 2254 2497 2497 2254 1272 2606 2497

1.8 2.3 2.5 2.5 2.3 1.3 2.6 2.5 3.0 3.0 3.0 3.0 3.0 1.6 1.6 1.8 1.8 1.6 2.0 2.2 2.2 2.2

183 2954 2954 MPV - ES MPV - LX MX-3 MX-3 - GS MX-3 - PRECEDIA MX-6 MX-6 - DX MX-6 - GT

328

183 183 1597 1597 1845 1845 1597 1991 2184 2184 2184

Description JE SOHC & DOHC NA VB MA FE SOHC F2 SOHC S2 OHC (Ford Eng.) OHC (Ford Eng.) AM1 (Mits. G54B) G6 SOHC OHV (Ford Eng.) OHV (Ford Eng.) OHV (Ford Eng.) SOHC (Ford Eng.) TC UC E5 SOHC & DOHC (B6) DOHC (BP) SOHC & DOHC (BP) DOHC (BP) KJ KL KL KJ TC G6 SOHC KL Duratec JE SOHC JE SOHC & DOHC Duratec Duratec DOHC (B6) SOHC & DOHC (B6) K8 K8 DOHC (B6) FS F2 SOHC F2 SOHC F2 SOHC

Years 90-91 72-76 77-78 79-84 86-87 87-93 82-84 94-97 98-01 87-88 89-93 98-05 94-96 94-00 01-05 77-78 79-80 81-85 90-93 95-02 94 02 99-01 95-02 97 95-02 76-77 89-94 00-01 02-04 89-98 90-95 05 05 95 92-94 92-94 92-94 95-96 93-95 88-92 91-92 88-92

MAZDA MAZDA MODEL INDEX (Cont’d.) Model

CID

MX-6 - LS MX-6 - LX MX-6 - RS NAVAJO - DX NAVAJO - LX PROTEGE

PROTEGE - 4WD PROTEGE - DX

PROTEGE - ES PROTEGE - GT

Type and Location

Standard Shaft Size

ENGINE

Liter

2497 2184 1991 4016 4016 1489 1589 1839 1839

2.5 2.2 2.0 4.0 4.0 1.5 1.6 1.8 1.8

2000 1839

2.0 1.8

1489 1839

1.5 1.8

2000 1839 2000 1839

2.0 1.8 2.0 1.8

Description KL F2 SOHC FS OHV (Ford Eng.) OHV (Ford Eng.) Z5 DOHC 16V DOHC (B6Y) DOHC (BP) SOHC & DOHC (BP) FS SOHC & DOHC (BP) Z5 DOHC SOHC & DOHC (BP) FS DOHC (BP) FS SOHC & DOHC (BP) Max. Bearing Thickness

Housing Bore

VIN CYL

1272cc (1.3) TC 1415cc (1.4) UC

L4 L4

Years 93-97 91-92 96-97 92-94 91-94 95 99-01 99-00 94

Model

CID

PROTEGE - LX

2000 2000 1839 1839

PROTEGE - MP3 PROTEGE - S PROTEGE - SE PROTEGE5 TRIBUTE

2000 1991 1991 2954 1991 1991 2954 2954 2954

01 90-91 TRIBUTE - DX 96-98 91-94 TRIBUTE - ES TRIBUTE - LX

02-03 95-98 02-03 90-91

Vertical Oil Clearance

Max. Overall Length

Bore x Stroke

cc 1489 1839

Material Code

Qty. Set

Liter

Description

1.5 Z5 DOHC 1.8 SOHC & DOHC (BP) 2.0 FS 2.0 FS 1.8 DOHC (BP) 1.8 SOHC & DOHC (BP) 2.0 FS 2.0 DOHC (Zetec) 2.0 FS 3.0 Duratec 2.0 DOHC (Zetec) 2.0 FS 3.0 Duratec 3.0 Duratec 3.0 Duratec

Bearing Shell No.

Years 96-98 90-94 02-03 01 95 90 02 01 01 01 02-04 02 02 02-04 02-04

Engine Set No. Sizes Available

TORQUE SETTINGS

73mm x 76mm 77mm x 76mm

Connecting Rod 25-29 ft.lbs/34-39 Nm Main Bearing 44-47 ft.lbs/59-64 Nm

Rod

Main 1-5

39.939/1.5724 39.954/1.5730

43.000/1.6929 43.019/1.6937

1.509/0.0594 .028/.0011 .079/.0031

17.00/0.669

49.939/1.9661 49.954/1.9667

54.000/2.1260 54.020/2.1268

2.009/0.0791 .028/.0011 .079/.0031

19.00/0.748

Thrust 5

57.100/2.2480 68.580/2.7000 57.350/2.2579 68.830/2.7098 Note: Set includes four pieces, use on No.5 position. Required with 5M8334 main set.

ENGINE

VIN CYL

1296cc (1.3) E3 1490cc (1.5) E5 1490cc (1.5) (D5)

L4 L4 L4

2.00/0.079

Bore x Stroke

F820

F250

4B8331

8331AL IH

Std. .25 .50 .75 1.0

8334AL IH

Std. .25 .50 .75 1.0 1.50

8334T U/L

5M8334

2T8334 Std.

TORQUE SETTINGS

77mm x 69.6mm 77mm x 80mm 77mm x 80mm

Connecting Rod 22-25 ft.lbs/30-34 Nm Main Bearing 48-51 ft.lbs/66-70 Nm

Rod

Main 1-5

39.939/1.5724 39.954/1.5730

43.000/1.6929 43.019/1.6937

1.509/0.0594 .028/.0011 .079/.0031

17.00/0.669

49.939/1.9661 49.954/1.9667

54.000/2.1260 54.020/2.1268

2.009/0.0791 .028/.0011 .079/.0031

19.00/0.748

Thrust 5

57.100/2.2480 68.580/2.7000 57.350/2.2579 68.830/2.7098 Note: Set includes four pieces, use on No.5 position. Required with 5M8334 main set.

ENGINE

VIN CYL

1323cc (1.3) B3 1498cc (1.5) B5

L4 L4

2.00/0.079

Bore x Stroke

F820

F250

4B8331

8331AL IH

Std. .25 .50 .75 1.0

8334AL IH

Std. .25 .50 .75 1.0 1.50

8334T U/L

5M8334

2T8334 Std.

TORQUE SETTINGS

71mm x 83.6mm 78mm x 78.4mm

Connecting Rod 21-25 ft.lbs/29-34 Nm Main Bearing 40-44 ft.lbs/54-59 Nm

Rod 39.939/1.5724 39.954/1.5730

43.000/1.6929 43.019/1.6937

1.509/0.0594 .028/.0011 .079/.0031

329

17.00/0.669

F820

8331AL IH

4B8331 Std. .25 .50 .75 1.0

MAZDA Engine Set No. Sizes Available

Type and Location

Standard Shaft Size

Max. Bearing Thickness

Vertical Oil Clearance

Max. Overall Length

Material Code

Qty. Set

Bearing Shell No.

(Contâ&#x20AC;&#x2122;d.)

Main - Half groove set. 1-5 49.938/1.9661 Std. .25 .50 .75 1.0 49.956/1.9668

5M8353

53.998/2.1259 54.018/2.1267

2.010/0.0791 .022/.0009 .076/.0030

17.50/0.689

F810

8354A U

49.938/1.9661 49.956/1.9668

53.998/2.1259 54.018/2.1267

2.013/0.0793 .022/.0009 .076/.0030

17.50/0.689

F810

8353A L

Main - Full groove set. 1-5 49.938/1.9661 49.956/1.9668

53.998/2.1259 54.018/2.1267

2.013/0.0793 .016/.0006 .070/.0028

17.50/0.689

F810

8354A IH

2.55/0.100

F250

8353T IH

1-5

5M8354 Std. .25 .50

1T8353 Std.

Housing Bore

Thrust 4

57.100/2.2480 68.830/2.7098 (Nominal I.D.) (Nominal O.D.) Note: Set includes two pieces. Required with 5M8353 main set.

ENGINE

VIN CYL

1484cc (1.5) UA

Bore x Stroke 75mm x 84mm

TORQUE SETTINGS Connecting Rod 35-38 ft.lbs/47-52 Nm Main Bearing 61-65 ft.lbs/82-88 Nm

Rod

4B1155

49.935/1.9660 49.955/1.9667

Std. .25 .50 .75

53.000/2.0866 53.020/2.0874

1.510/0.0594 .025/.0010 .081/.0034

20.90/0.823

F820

Main - Overflange length increases for undersizes. * See below for dimensional information. 1 62.940/2.4779 67.005/2.6380 2.008/0.0791 .034/.0013 24.63/0.970 F820 Std. .25 .50 .75 1.0 62.955/2.4785 67.020/2.6386 .080/.0031 2 (FL) 62.940/2.4779 67.005/2.6380 2.008/0.0791 .034/.0013 36.02/1.418 F820 62.955/2.4785 67.020/2.6386 .080/.0031

3M1757

62.940/2.4779 62.955/2.4785

.25 u/s shaft .50 u/s shaft .75 u/s shaft 1.0 u/s shaft

ENGINE

67.005/2.6380 67.020/2.6386

30.13/1.186

F820

1155AL IH

1757AL IH 1758AL IH

2 2

1759AL IH

* DIMENSIONAL INFORMATION FOR 3M1757 Overall Width (Nominal) Increase in Width 1.424"/36.17mm +0.006"/0.15mm 1.427"/36.25mm +0.009"/0.23mm 1.430"/36.32mm +0.012"/0.30mm 1.433"/36.40mm +0.015"/0.38mm

VIN CYL

1489cc (1.5) Z5 DOHC

2.008/0.0791 .034/.0013 .080/.0031

Bore x Stroke 75.3mm x 83.6mm

TORQUE SETTINGS Connecting Rod 22-25 ft.lbs/30-34 Nm Main Bearing 22-27 ft.lbs/30-37 Nm Step 1 Main Bearing 40-43 ft.lbs/54-58 Nm Step 2

Rod

4B8331 Std. .25 .50 .75 1.0

5M8353

Main 1-5

Std. .25 .50 .75 1.0 1-5

1T8353 Std.

1.509/0.0594 .028/.0011 .079/.0031

17.00/0.669

F820

8331AL IH

49.938/1.9661 49.956/1.9668 49.938/1.9661 49.956/1.9668

53.998/2.1259 54.018/2.1267 53.998/2.1259 54.018/2.1267

2.010/0.0791 .022/.0009 .076/.0030 2.013/0.0793 .022/.0009 .076/.0030

17.50/0.689

F810

17.50/0.689

F810

8354A U 8353A L

2.55/0.100

F250

8353T IH

1151AL IH

57.100/2.2480 68.830/2.7098 (Nominal I.D.) (Nominal O.D.) Note: Set includes two pieces. Required with 5M8353 main set.

VIN CYL

1586cc (1.6) NA 1769cc (1.8) VC

Std. .25 .50 .75 1.0

43.000/1.6929 43.019/1.6937

Thrust 4

ENGINE

4B1151

39.939/1.5724 39.954/1.5730

L4 L4

Rod - for engines 1970-79. 52.941/2.0843 56.002/2.2048 52.955/2.0848 56.017/2.2054

Bore x Stroke 78mm x 83mm 80mm x 88mm

TORQUE SETTINGS Connecting Rod 32 ft.lbs/43 Nm Main Bearing 63 ft.lbs/85 Nm

1.510/0.0594 .030/.0012 .086/.0034

330

21.97/0.865

F820

MAZDA Type and Location

Standard Shaft Size

Max. Bearing Thickness

Housing Bore

Vertical Oil Clearance

Max. Overall Length

Material Code

Qty. Set

Bearing Shell No.

Engine Set No. Sizes Available

(Contâ&#x20AC;&#x2122;d.) Rod - For engines from 1980 on. 52.940/2.0842 56.005/2.2049 52.955/2.0848 56.020/2.2055 Main 1,2,4 3,5

62.939/2.4779 62.954/2.4785 62.939/2.4779 62.954/2.4785

67.010/2.6382 67.018/2.6385 67.010/2.6382 67.018/2.6385

1.510/0.0594 .030/.0012 .086/.0034

20.80/0.819

2.007/0.0790 .030/.0012 .071/.0028 2.007/0.0790 .030/.0012 .071/.0028

18.00/0.709

Thrust 5

69.850/2.7500 85.470/3.3650 70.010/2.7563 85.725/3.3750 Note: Set includes four pieces, use on No.5 position. Required with 5M1627 main set. Cam 1 2,3

F780

F820

24.00/0.945

F820

2.03/0.080

1756 IH 1627AL IH 1628AL U/L

3C8276

2.014/0.0793 .020/.0008 .076/.0030

24.00/0.945

F23

8276 IH

44.945/1.7695 44.961/1.7701

49.009/1.9295 49.032/1.9304

2.014/0.0793 .020/.0008 .076/.0030

18.00/0.709

F23

8277 U/L

28.07/1.105

F100

RB4017

ENGINE

Std.

RB4017 Semi

VIN CYL

1587cc (1.6) F6 1789cc (1.8) F8 1998cc (2.0) FE SOHC 1998cc (2.0) FE SOHC Turbo 2184cc (2.2) F2 SOHC 2184cc (2.2) F2 SOHC Turbo

5M1627 Std. .25 .50 .75 1.0

2T4162

49.009/1.9295 49.032/1.9304

Small End - not bored - single pieces. 22.000/0.8661 25.000/0.9843 (Nominal) (Nominal)

4B1756 Std. .25 .50 .75 1.0

4162T U/L

44.945/1.7695 44.961/1.7701

L4 L4 L4 L4 L4 L4

Bore x Stroke 81mm x 77mm 86mm x 77mm 86mm x 86mm 86mm x 86mm 86mm x 94mm 86mm x 94mm

TORQUE SETTINGS

Connecting Rod 37-41 ft.lbs/50-55 Nm Main Bearing 61-68 ft.lbs/82-92 Nm

Rod 50.940/2.0055 50.955/2.0061

54.002/2.1261 54.017/2.1266

1.510/0.0594 .027/.0011 .083/.0033

21.13/0.832

F810

Main - for (F6 & FE engs from 4/87 on),(F8 engs from 3/88 on),(F2 engs from 1/87 on) - half groove. 1-5 59.939/2.3598 64.000/2.5197 2.014/0.0793 .017/.0007 19.13/0.753 F780 5 59.954/2.3604 64.018/2.5204 .071/.0028 1,2,4,5 59.939/2.3598 64.000/2.5197 2.014/0.0793 .017/.0007 19.13/0.753 F780 4 59.954/2.3604 64.018/2.5204 .071/.0028 3 (Fl)

59.939/2.3598 64.000/2.5197 2.014/0.0793 .017/.0007 59.954/2.3604 64.018/2.5204 .071/.0028 Overflange length increases for undersizes. *See below for dimensional information.

27.99/1.102

F780

2130A IH 8133 L 8134 U

4B2130 Std. .25 .50 .75 1.0

5M8133 Std. .25 .50 .75 1.0

8135 U

* DIMENSIONAL INFORMATION FOR 5M8133 Overall Width (Nominal) Increase in Width 0.25 mm u/s shaft 1.106"/28.09mm +0.004"/0.10mm 0.50 mm u/s shaft 1.109"/28.17mm +0.007"/0.18mm 0.75 mm u/s shaft 1.112"/28.25mm +0.010"/0.26mm 1.00 mm u/s shaft 1.115"/28.33mm +0.013"/0.34mm Main - for (F6 & FE engs to 3/87),(F8 engs to 2/88) - full groove. 1,2,4,5 59.940/2.3598 64.000/2.5197 2.014/0.0793 .017/.0007 59.955/2.3604 64.019/2.5204 .071/.0028

19.13/0.753

3 (Fl)

2.014/0.0793 .017/.0007 .071/.0028

27.99/1.102

F780

8135 U

59.940/2.3598 64.000/2.5197 2.014/0.0793 .017/.0007 59.955/2.3604 64.019/2.5204 .071/.0028 Overflange length increases for undersizes. *See below for dimensional information.

19.13/0.753

F780

8134 L

59.940/2.3598 59.955/2.3604

64.000/2.5197 64.019/2.5204

F780

* DIMENSIONAL INFORMATION FOR 5M8134 Overall Width (Nominal) Increase in Width 0.25 mm u/s shaft 1.106"/28.09mm +0.004"/0.10mm 0.50 mm u/s shaft 1.109"/28.17mm +0.007"/0.18mm 0.75 mm u/s shaft 1.112"/28.25mm +0.010"/0.26mm 1.00 mm u/s shaft 1.115"/28.33mm +0.013"/0.34mm

331

8134 IH

5M8134 Std. .25 .50 .75 1.0

MAZDA Engine Set No. Sizes Available

Standard Shaft Size

Housing Bore

Max. Bearing Thickness

Vertical Oil Clearance

Max. Overall Length

Material Code

Qty. Set

Bearing Shell No.

Main - Standard width flange version of 5M8134. (NO increase in flange width with undersize) 59.940/2.3598 64.000/2.5197 2.014/0.0793 .017/.0007 19.13/0.753 F810 1,2,4,5 59.955/2.3604 64.019/2.5204 .071/.0028

8134A IH

3 (Fl)

59.940/2.3598 59.955/2.3604

64.000/2.5197 64.019/2.5204

2.014/0.0793 .017/.0007 .071/.0028

27.99/1.102

F810

8137A U

59.940/2.3598 59.955/2.3604

64.000/2.5197 64.019/2.5204

2.014/0.0793 .017/.0007 .071/.0028

19.13/0.753

F810

8134A L

(Contâ&#x20AC;&#x2122;d.) 5M8137

.25 .50 .75

Type and Location

ENGINE

VIN CYL

1589cc (1.6) 16V DOHC (B6Y) 1597cc (1.6) DOHC (B6) 1597cc (1.6) SOHC & DOHC (B6) 1597cc (1.6) SOHC (B6) 1597cc (1.6) DOHC (B6T) Turbo 1839cc (1.8) DOHC (BP) 1839cc (1.8) SOHC & DOHC (BP)

L4 L4 L4 L4 L4 L4 L4

Bore x Stroke 78mm x 84mm 78mm x 84mm 78mm x 84mm 78mm x 84mm 78mm x 84mm 83mm x 85mm 83mm x 85mm

TORQUE SETTINGS Connecting Rod 35-38 ft.lbs/47-52 Nm (SOHC) Connecting Rod 37-40 ft.lbs/50-54 Nm (DOHC) Main Bearing 40-43 ft.lbs/54-58 Nm (All engines)

Rod

4B8351

44.940/1.7693 44.956/1.7699

47.996/1.8896 48.016/1.8904

1.510/0.0594 .020/.0008 .071/.0028

17.00/0.669

F810

8351A IH

49.938/1.9661 49.956/1.9668

53.998/2.1259 54.018/2.1267

2.010/0.0791 .022/.0009 .076/.0030

17.50/0.689

F810

8354A U

49.938/1.9661 49.956/1.9668

53.998/2.1259 54.018/2.1267

2.013/0.0793 .022/.0009 .076/.0030

17.50/0.689

F810

8353A L

Main - Full groove set. 1-5 49.938/1.9661 49.956/1.9668

53.998/2.1259 54.018/2.1267

2.013/0.0793 .016/.0006 .070/.0028

17.50/0.689

F810

8354A IH

57.100/2.2480 68.830/2.7098 (Nominal I.D.) (Nominal O.D.) Note: Set includes two pieces, use on No. 4 position. Required with 5M8353 main set.

2.55/0.100

F250

8353T IH

21.80/0.858

F100

RB4108

Std. .25 .50 .75 1.0

5M8353

Main 1-5

Std. .25 .50 .75 1.0 1-5

5M8354 Std. .25 .50

1T8353 Std.

RB4108 Semi

Thrust 4

Small End - suits DOHC engines only. 19.993/0.7871 23.000/0.9055 (Nominal) (Nominal)

ENGINE

VIN CYL

1796cc (1.8) VB 1970cc (2.0) MA

L4 L4

Bore x Stroke 78mm x 94mm 80mm x 98mm

TORQUE SETTINGS Connecting Rod 30 ft.lbs/41 Nm (1972-74 engines only)

Connecting Rod 31 ft.lbs/42 Nm (1975-85 engines only)

Main Bearing 60 ft.lbs/81 Nm (1972-74 engines) Main Bearing 63 ft.lbs/85 Nm (1975-85 engines) Rod

4B1626 Std. .25 .50 .75 1.0

5M1627

Main 1,2,4

Std. .25 .50 .75 1.0 3,5

2T4162 Std.

3C8276

52.941/2.0843 52.954/2.0848

56.002/2.2048 56.017/2.2054

1.510/0.0594 .028/.0011 .071/.0028

21.97/0.865

F820

1626AL IH

62.939/2.4779 62.954/2.4785 62.939/2.4779 62.954/2.4785

67.010/2.6382 67.018/2.6385 67.010/2.6382 67.018/2.6385

2.007/0.0790 .030/.0012 .071/.0028 2.007/0.0790 .030/.0012 .071/.0028

18.00/0.709

F820

24.00/0.945

F820

1627AL IH 1628AL U/L

2.03/0.080

4162T U/L

24.00/0.945

F23

18.00/0.709

F23

8276 IH 8277 U/L

Thrust 5

69.850/2.7500 85.470/3.3650 70.010/2.7563 85.725/3.3750 Note: Set includes four pieces, use on No.5 position. Required with 5M1627 main set.

Cam 1

Std. 2,3

44.945/1.7695 44.961/1.7701 44.945/1.7695 44.961/1.7701

49.009/1.9295 49.032/1.9304 49.009/1.9295 49.032/1.9304

2.014/0.0793 .020/.0008 .076/.0030 2.014/0.0793 .020/.0008 .076/.0030

332

MAZDA Type and Location

Standard Shaft Size

Max. Bearing Thickness

Housing Bore

Vertical Oil Clearance

Max. Overall Length

Material Code

Qty. Set

Bearing Shell No.

Engine Set No. Sizes Available

(Contâ&#x20AC;&#x2122;d.) Small End - not bored - single pieces. 22.000/0.8661 25.000/0.9843 (Nominal) (Nominal)

ENGINE

28.07/1.105

RB4017

RB4017 Semi

VIN CYL

1845cc (1.8) K8

F100

Bore x Stroke

TORQUE SETTINGS

75mm x 69.6mm

Connecting Rod 16-19 ft.lbs + 89-95 deg Main Bearing Consult Service Manual

Rod

Main 1,2,3 4

47.935/1.8872 47.955/1.8880

51.000/2.0079 51.017/2.0085

1.512/0.0595 .021/.0008 .083/.0033

17.00/0.669

F780

61.930/2.4382 61.956/2.4392

67.000/2.6378 67.016/2.6384

2.505/0.0986 .034/.0013 .102/.0040

18.12/0.713

61.930/2.4382 61.956/2.4392

67.000/2.6378 67.016/2.6384

2.505/0.0986 .034/.0013 .102/.0040

22.12/0.871

F780

8148 U/L

2.05/0.081

F817

8352T U/L

F780

6B8146

8146 IH

Std. .25 .50 .75

8147 U/L

Std. .25 .50 .75

4M8147

Thrust 68.250/2.6870 79.750/3.1398 68.500/2.6968 80.000/3.1496 Note: Set includes four pieces, use on No.4 position. Required with 4M8147 main set.

ENGINE

VIN CYL

1985cc (2.0) VA

Bore x Stroke 82mm x 94mm

2T8352 Std.

TORQUE SETTINGS

Connecting Rod 35-38 ft.lbs/47-52 Nm Main Bearing 61-65 ft.lbs/82-88 Nm

Rod 52.940/2.0842 52.955/2.0848

56.005/2.2049 56.020/2.2055

1.510/0.0594 .030/.0012 .086/.0034

20.80/0.819

F780

Main - Overflange length increases for undersizes. * See below for dimensional information. 1 62.940/2.4779 67.005/2.6380 2.008/0.0791 .034/.0013 24.63/0.970 F820 62.955/2.4785 67.020/2.6386 .080/.0031 2 (FL) 62.940/2.4779 67.005/2.6380 2.008/0.0791 .034/.0013 36.02/1.418 F820 62.955/2.4785 67.020/2.6386 .080/.0031 3

62.940/2.4779 62.955/2.4785

67.005/2.6380 67.020/2.6386

.25 u/s shaft .50 u/s shaft .75 u/s shaft 1.0 u/s shaft

2.008/0.0791 .034/.0013 .080/.0031

28.07/1.105

2 2

1757AL IH 1758AL IH

4B1756 Std. .25 .50 .75 1.0

3M1757 Std. .25 .50 .75 1.0

1759AL IH

F100

RB4017

RB4017 Semi

VIN CYL

1839cc (1.8) (FP) 1991cc (2.0) FS 2000cc (2.0) FS

F820

1756 IH

* DIMENSIONAL INFORMATION FOR 3M1757 Overall Width (Nominal) Increase in Width 1.424"/36.17mm +0.006"/0.15mm 1.427"/36.25mm +0.009"/0.23mm 1.430"/36.32mm +0.012"/0.30mm 1.433"/36.40mm +0.015"/0.38mm

Small End - not bored - single pieces. 22.000/0.8661 25.000/0.9843 (Nominal) (Nominal)

ENGINE

30.13/1.186

L4 L4 L4

Bore x Stroke 83mm x 92mm 83mm x 92mm

TORQUE SETTINGS

Connecting Rod 16-19 ft.lbs + 90 deg Main Bearing 13-16 ft.lbs + 90 deg

Rod

Main 1-5

47.940/1.8874 47.955/1.8880

51.000/2.0079 51.015/2.0085

1.510/0.0594 .025/.0010 .071/.0028

17.00/0.669

55.937/2.2022 55.955/2.2029

60.000/2.3622 60.015/2.3628

2.010/0.0791 .025/.0010 .074/.0029

17.50/0.689

Thrust 4

62.000/2.4409 81.350/3.2027 62.250/2.4508 81.600/3.2126 Note: Set includes two pieces, use on No. 4 position. Required with 5M8302 main set.

2.55/0.100

333

F780

F817

4B8300

8300 IH

Std. .25 .50 .75 1.0

8302 U/L

Std. .25 .50 .75

8302T IH

5M8302

1T8302 Std.

MAZDA Engine Set No. Sizes Available

Type and Location

Standard Shaft Size

ENGINE

Housing Bore

VIN CYL

1998cc (2.0) RF20 Diesel 2184cc (2.2) R2 Diesel

L4 L4

Max. Bearing Thickness

Vertical Oil Clearance

Bore x Stroke 86mm x 86mm 86mm x 94mm

Max. Overall Length

Material Code

Qty. Set

Bearing Shell No.

TORQUE SETTINGS Connecting Rod 37-41 ft.lbs/50-55 Nm Main Bearing 61-68 ft.lbs/82-92 Nm

Rod

4B2130

50.940/2.0055 50.955/2.0061

54.002/2.1261 54.017/2.1266

1.510/0.0594 .027/.0011 .083/.0033

21.13/0.832

F810

2130A IH

59.940/2.3598 59.960/2.3606 59.940/2.3598 59.960/2.3606

63.999/2.5196 64.019/2.5204 63.999/2.5196 64.019/2.5204

2.007/0.0790 .025/.0010 .091/.0036 2.007/0.0790 .025/.0010 .091/.0036

19.13/0.753

F780

21.13/0.832

F780

2134 IH 2135 IH

68.800/2.7087 84.250/3.3169 (Nominal I.D.) (Nominal O.D.) Note: Set includes four pieces, use on No.3 position. Required with 5M2134 main set.

2.05/0.081

F250

2134T U/L

26.75/1.053

F100

RB4077

Std. .25 .50 .75 1.0

5M2134

Main 1,2,4,5

Std. .25 .50 .75 1.0 3

2T2134 Std.

RB4077 Semi

Thrust 3

Small End - for RF engines only - not bored, single pieces. 24.987/0.9837 28.013/1.1029 25.000/0.9843 28.033/1.1037

ENGINE

VIN CYL

1998cc (2.0) FE DOHC Turbo

Bore x Stroke 86mm x 86mm

TORQUE SETTINGS Connecting Rod 37-41 ft.lbs/50-55 Nm Main Bearing 61-68 ft.lbs/82-92 Nm

Rod

4B8140

50.940/2.0055 50.955/2.0061

54.002/2.1261 54.027/2.1270

1.510/0.0594

21.13/0.832

F780

8140 IH

59.939/2.3598 59.954/2.3604

64.000/2.5197 64.018/2.5204

2.014/0.0793 .017/.0007 .071/.0028

19.13/0.753

F780

8133 L

59.939/2.3598 64.000/2.5197 2.014/0.0793 .017/.0007 59.954/2.3604 64.018/2.5204 .071/.0028 3 (Fl) 59.939/2.3598 64.000/2.5197 2.014/0.0793 .017/.0007 59.954/2.3604 64.018/2.5204 .071/.0028 Overflange length increases for undersizes. *See below for dimensional information.

19.13/0.753

F780

27.99/1.102

F780

8134 U 8135 U

Std. .25 .50 .75 1.0

5M8133

Main 1-5

Std. .25 .50 .75 1.0 1,2,4,5

ENGINE

VIN CYL

1991cc (2.0) DOHC (Zetec)

4B4135A Std. .25 .50 .75

4B4135AO/S2 .25 .50 .75

5M7193A Std. .25 .50 .75

Bore x Stroke 84.8mm x 87.9mm

TORQUE SETTINGS Connecting Rod 16-19 ft.lbs + 90 deg Main Bearing 13-16 ft.lbs + 90 deg

Rod - High Strength Aluminum Silicon material. 46.890/1.8461 49.890/1.9642 1.475/0.0581 .030/.0012 46.910/1.8468 49.910/1.9650 .086/.0034

20.10/0.791

F810

4135A IH

Rod - .002" oversize OD version of 4B4135A. 46.890/1.8461 49.940/1.9661 1.625/0.0640 .030/.0012 46.910/1.8468 49.960/1.9669 (@ 0.25mm u/size) .086/.0034

20.10/0.791

F810

9062A IH

Main - High Strength Aluminum Silicon material. 57.980/2.2827 62.287/2.4522 2.131/0.0839 .025/.0010 1,2,4,5 58.000/2.2835 62.300/2.4528 .074/.0029

19.21/0.756

F810

7193A U/L

3 (Fl)

24.68/0.972

F810

7195A U

57.980/2.2827 58.000/2.2835

62.287/2.4522 62.300/2.4528

2.131/0.0839 .025/.0010 .074/.0029

334

MAZDA Type and Location

Standard Shaft Size

Max. Bearing Thickness

Housing Bore

ENGINE

VIN CYL

2000cc (2.0) Duratec

Vertical Oil Clearance

Max. Overall Length

Bore x Stroke

Material Code

Qty. Set

Bearing Shell No.

Engine Set No. Sizes Available

TORQUE SETTINGS

84.8mm x 87.9mm

Rod

Main 1,2,4,5 3 (Fl)

46.980/1.8496 47.000/1.8504

50.025/1.9695 50.045/1.9703

1.505/0.0593 .015/.0006 .075/.0030

16.25/0.640

51.980/2.0465 52.000/2.0472 51.980/2.0465 52.000/2.0472

57.019/2.2448 57.037/2.2455 57.019/2.2448 57.037/2.2455

2.520/0.0992 .015/.0006 .045/.0018 2.517/0.0991 .015/.0006 .045/.0018

19.09/0.752

ENGINE

VIN CYL

2209cc (2.2) S2 Diesel

25.75/1.014

Bore x Stroke

F780

F810 F810

9 1

4390 IH 8173A U/L 8174A U

4B4390 Std. .25 .50

5M8174A Std. .25 .50 .75

TORQUE SETTINGS

88.9mm x 89mm

Connecting Rod 50-54 ft.lbs/68-73 Nm Main Bearing 80-85 ft.lbs/108-115 Nm

Rod

Main 1,2,4,5 3

52.987/2.0861 53.000/2.0866

56.683/2.2316 56.696/2.2321

1.833/0.0722 .021/.0008 .073/.0029

28.60/1.126

64.987/2.5585 65.000/2.5591 64.987/2.5585 65.000/2.5591 64.987/2.5585 65.000/2.5591

68.987/2.7160 69.000/2.7165 68.987/2.7160 69.000/2.7165 68.987/2.7160 69.000/2.7165

1.983/0.0781 .021/.0008 .073/.0029 1.983/0.0781 .021/.0008 .073/.0029 1.983/0.0781 .021/.0008 .073/.0029

28.60/1.126

F780

28.60/1.126

F780

28.60/1.126

F780

73.500/2.8937 90.300/3.5551 2.33/0.092 (Nominal I.D.) (Nominal O.D.) Note: Thrust set includes four pieces, use on No. 3 position. Required with 5M1748 main set.

F250

3 Thrust 3

Small End - not bored, single pieces. 28.000/1.1024 30.987/1.2200 (Nominal) 31.000/1.2205

ENGINE

1.830/0.0720

F100

1748 IH 1748 U 1749 L

4B1750 Std. .25 .50 .75 1.0

5M1748 Std. .25 .50 .75

1748T U/L

2T1748

RB4068

Std.

Semi

VIN CYL

2254cc (2.3) KJ Supercharged 2497cc (2.5) KL 2497cc (2.5) KL

26.80/1.055

1750 IH

V6 V6 V6

Bore x Stroke

TORQUE SETTINGS

80.3mm x 74.2mm 84.5mm x 74.2mm 84.5mm x 74.2mm

Connecting Rod 16-20 ft.lbs + 83-97 deg Main Bearing Consult Service Manual

Rod 52.935/2.0841 52.955/2.0848

56.000/2.2047 56.020/2.2055

1.511/0.0595 .023/.0009 .089/.0035

17.00/0.669

61.930/2.4382 61.956/2.4392

67.000/2.6378 67.016/2.6384

2.505/0.0986 .034/.0013 .102/.0040

18.12/0.713

61.930/2.4382 61.956/2.4392

67.000/2.6378 67.016/2.6384

2.505/0.0986 .034/.0013 .102/.0040

22.12/0.871

F780

8148 U/L

68.250/2.6870 79.750/3.1398 2.05/0.081 68.500/2.6968 80.000/3.1496 Note: Thrust set includes four pieces, use on No. 4 position. Required with 4M8147 main set.

F817

8352T U/L

Main 1,2,3 4

F780

6B8350

8350 IH

Std. .25 .50 .75 1.0

8147 U/L

Std. .25 .50 .75

4M8147

Thrust

ENGINE

VIN CYL

Bore x Stroke

2295cc (2.3) OHC (Ford Eng.) 2492cc (2.5) OHC (Ford Eng.)

A C

3.78 x 3.13 3.779 x 3.405

L4 L4

2T8352 Std.

TORQUE SETTINGS

Connecting Rod 30-36 ft.lbs/40-48 Nm Main Bearing 80-90 ft.lbs/108-122 Nm

Rod 51.981/2.0465 51.999/2.0472

55.169/2.1720 55.189/2.1728

1.580/0.0624 .012/.0005 .076/.0030

335

20.32/0.800

F780

2186 IH

4B984P Std. 10 20 30

MAZDA Engine Set No. Sizes Available

Type and Location

Max. Overall Length

Material Code

Qty. Set

Bearing Shell No.

2.428/0.0956 .020/.0008 .066/.0026

24.13/0.950

F780

1753 L

60.886/2.3971 60.907/2.3979

2.428/0.0956 .020/.0008 .066/.0026

24.13/0.950

F780

1753 U

60.886/2.3971 60.907/2.3979

2.428/0.0956 .020/.0008 .066/.0026

30.33/1.194

F780

1754 U

Standard Shaft Size

Housing Bore

56.010/2.2051 56.030/2.2059

60.886/2.3971 60.907/2.3979

1,2,4,5

56.010/2.2051 56.030/2.2059

3 (Fl)

56.010/2.2051 56.030/2.2059

Max. Bearing Thickness

Vertical Oil Clearance

19 (Contâ&#x20AC;&#x2122;d.) 5M1743P

Main 1-5

Std. .25 .50 .75 1.0

5M7194P .25 .50 .75

Main - Alt set to 5M1743P with +.010" overflange length increase. See dimensional information below. 56.010/2.2051 60.886/2.3971 2.553/0.1005 .020/.0008 24.13/0.950 F780 5 1-5 56.030/2.2059 60.907/2.3979 (@ 0.25 mm u/s) .066/.0026 1,2,4,5 56.010/2.2051 60.886/2.3971 2.553/0.1005 .020/.0008 24.13/0.950 F780 4 56.030/2.2059 60.907/2.3979 (@ 0.25 mm u/s) .066/.0026 3 (Fl)

56.010/2.2051 60.886/2.3971 2.553/0.1005 .020/.0008 56.030/2.2059 60.907/2.3979 (@ 0.25 mm u/s) .066/.0026 To be discontinued when stock exhausted.

30.58/1.204

F780

1753 L 1753 U

7194 U

F23

F-34-1B

* DIMENSIONAL INFORMATION FOR 5M7194P Overall Width (Nominal) Increase in Width 0.25 mm u/s shaft 1.204" +0.010" 0.50 mm u/s shaft 1.204" +0.010" 0.75 mm u/s shaft 1.204" +0.010"

4C777BS Std.

4C777S

Cam - Special oil control bearing - differs from OEM design. 360 OD groove. 1-4 44.990/1.7713 48.275/1.9006 1.620/0.0638 17.73/0.698 45.010/1.7720 48.300/1.9016 Cam 1-4

Std.

2C1095S Std.

44.990/1.7713 45.010/1.7720

48.275/1.9006 48.300/1.9016

AR Auxiliary - for 2.3L engines only. 1 41.960/1.6520 45.644/1.7970 41.986/1.6530 45.670/1.7980 2 41.960/1.6520 45.136/1.7770 41.986/1.6530 45.160/1.7780

ENGINE

VIN CYL

2260cc (2.3) Duratec

1.620/0.0638

17.73/0.698

F23

F-34-1

1.810/0.0712

12.83/0.505

F23

AGB-34-1

1.550/0.0612

12.83/0.505

F23

AGB-34-2

Bore x Stroke 87.4mm x 94mm

TORQUE SETTINGS Connecting Rod 26 ft.lbs + 90 deg Main Bearing 63 ft.lbs (Tighten thrust position last)

Rod

4B8170A

49.980/1.9677 50.000/1.9685

Std. .25 .50

4B8170AO/S2 .25 .50 .75

5M8174A

1.500/0.0591 .026/.0010 .052/.0020

Rod - .002" oversize OD version of 4B8170A. 49.980/1.9677 53.076/2.0896 1.650/0.0650 .026/.0010 50.000/1.9685 53.096/2.0904 (@ 0.25mm u/s) .052/.0020 Main 1,2,4,5

Std. .25 .50 .75 3 (Fl)

53.025/2.0876 53.045/2.0884

16.80/0.661

F810

8170A IH

16.80/0.661

F810

9111A IH

51.980/2.0465 52.000/2.0472

57.019/2.2448 57.037/2.2455

2.520/0.0992 .015/.0006 .045/.0018

19.09/0.752

F810

8173A U/L

51.980/2.0465 52.000/2.0472

57.019/2.2448 57.037/2.2455

2.517/0.0991 .015/.0006 .045/.0018

25.75/1.014

F810

8174A U

ENGINE

VIN CYL

2555cc (2.6) AM1 (Mits. G54B)

Bore x Stroke 91.1mm x 98mm

TORQUE SETTINGS Connecting Rod 33-35 ft.lbs/44-47 Nm Main Bearing 55-61 ft.lbs/74-83 Nm

Rod

4B1136 Std. .25 .50 .75 1.0

52.973/2.0855 53.000/2.0866

56.007/2.2050 56.021/2.2055

1.493/0.0588 .021/.0008 .076/.0030

336

25.13/0.989

F820

1136AL IH

MAZDA Type and Location

Standard Shaft Size

Max. Bearing Thickness

Housing Bore

Vertical Oil Clearance

Max. Overall Length

Material Code

Qty. Set

Bearing Shell No.

Engine Set No. Sizes Available

(Contâ&#x20AC;&#x2122;d.) Main - for engines with 60mm/2.3622" main journal diameter. 1,2,4,5 59.973/2.3611 64.000/2.5197 1.990/0.0783 .020/.0008 60.000/2.3622 64.020/2.5205 .081/.0032

25.13/0.989

1,2,4,5

1.990/0.0783 .020/.0008 .081/.0032

25.13/0.989

F820

1139AL L

59.973/2.3611 64.000/2.5197 1.990/0.0783 .020/.0008 60.000/2.3622 64.020/2.5205 .081/.0032 Overflange length remains constant for standard and undersizes.

30.95/1.219

F820

1135AL IH

59.973/2.3611 60.000/2.3622

64.000/2.5197 64.020/2.5205

3 (Fl)

F820

1134AL U

Balance Shaft - with groove. 43.009/1.6933 46.030/1.8122 2,3 43.025/1.6939 46.050/1.8130

1.478/0.0582

20.24/0.797

F818

8288

1.505/0.0593

18.00/0.709

F818

8289

1.478/0.0582

20.24/0.797

F818

8369

1.505/0.0593

18.00/0.709

F818

8289

22.959/0.9039 22.980/0.9047

26.000/1.0236 26.021/1.0244

Balance Shaft - without groove. 2,3 43.009/1.6933 46.030/1.8122 43.025/1.6939 46.050/1.8130 1 22.959/0.9039 26.000/1.0236 22.980/0.9047 26.021/1.0244

2,3,4,5

33.924/1.3356 33.950/1.3366 33.924/1.3356 33.950/1.3366

ENGINE

38.014/1.4966 38.038/1.4976 38.014/1.4966 38.038/1.4976

3BS8288

3BS8369 Std. .25

2.006/0.0790 .041/.0016 .104/.0041 2.006/0.0790 .041/.0016 .104/.0041

VIN CYL

2606cc (2.6) G6 SOHC

5M1139 Std. .25 .50 .75 1.0

Std. .25

20.14/0.793

F23

20.14/0.793

F23

Bore x Stroke

TORQUE SETTINGS

92mm x 98mm

Connecting Rod 48-51 ft.lbs Main Bearing 61-65 ft.lbs

SC762 U/L

5SC761 Std.

SC761 U SC760 L

Rod 50.940/2.0055 50.955/2.0061

54.002/2.1261 54.027/2.1270

1.510/0.0594

59.939/2.3598 59.949/2.3602

63.998/2.5196 64.018/2.5204

2.010/0.0791 .029/.0011 .085/.0033

20.13/0.793

59.939/2.3598 59.949/2.3602

63.998/2.5196 64.018/2.5204

2.010/0.0791 .029/.0011 .085/.0033

20.13/0.793

F780

8138 U

59.939/2.3598 63.998/2.5196 2.010/0.0791 .029/.0011 59.949/2.3602 64.018/2.5204 .085/.0033 Overflange length remains constant for standard and undersizes.

26.00/1.024

F780

8139 U

Main 1-5 1,2,4,5

21.13/0.832

3 (Fl)

Balance Shaft Front

F780

Std. .25 .50 .75 1.0

8138 L

Std. .25 .50 .75

46.000/1.8110 46.020/1.8118

1.984/0.0781

23.11/0.910

F23

MZG-3-1

Centre

44.000/1.7323 44.020/1.7331

1.981/0.0780

26.16/1.030

F23

MZG-3-2

Rear

23.997/0.9448 24.023/0.9458

1.486/0.0585

16.13/0.635

F23

MZG-3-3

32.144/1.2655

1.072/0.0422

17.78/0.700

F23

MZA-4-1 U VHA-1-2

Cam Tower 1-5

4B8140

8140 IH

5M8138

6BS8033 Std.

337

5SC6006 Std.

MAZDA Engine Set No. Sizes Available

Type and Location

Standard Shaft Size

ENGINE

Housing Bore

VIN CYL

2954cc (3.0) JE SOHC 2954cc (3.0) JE SOHC & DOHC

V6 V6

Max. Bearing Thickness

Vertical Oil Clearance

Bore x Stroke 90mm x 77mm 90mm x 77mm

Max. Overall Length

Material Code

Qty. Set

Bearing Shell No.

TORQUE SETTINGS Connecting Rod 22 ft.lbs + 90 deg Main Bearing 14 ft.lbs + 90 deg + 45 deg

Rod

6B8350 Std. .25 .50 .75 1.0

4M8352

Main 1-4

Std. .25 .50

52.935/2.0841 52.955/2.0848

56.000/2.2047 56.020/2.2055

1.511/0.0595 .023/.0009 .089/.0035

17.00/0.669

F780

8350 IH

61.935/2.4384 61.955/2.4392

66.000/2.5984 66.020/2.5992

2.012/0.0792 .021/.0008 .087/.0034

18.13/0.714

F780

8352 U/L

2.05/0.081

F817

8352T U/L

Thrust

2T8352 Std.

68.250/2.6870 79.750/3.1398 68.500/2.6968 80.000/3.1496 Note: Set includes 4 pieces. Required with 4M8352 main set.

ENGINE

VIN CYL

Bore x Stroke

2954cc (3.0) OHV (Ford Eng.) 2983cc (3.0) OHV (Ford Eng.)

U U

89mm x 80mm 89mm x 80mm

V6 V6

TORQUE SETTINGS Connecting Rod 23-29 ft.lbs/31-39 Nm Main Bearing 63-69 ft.lbs/85-93 Nm

Rod

6B1385P Std. .25 .50 .75 1.0

4M1702P

Main 1,2

Std. .25 .50 .75

53.983/2.1253 54.003/2.1261

57.150/2.2500 57.170/2.2508

1.567/0.0617 .013/.0005 .079/.0031

19.25/0.758

F780

5230 IH

63.983/2.5190 64.003/2.5198

68.885/2.7120 68.905/2.7128

2.443/0.0962 .025/.0010 .058/.0023

18.69/0.736

F780

5232 U/L

25.65/1.010

F780

27.00/1.063

F780

5233 U/L 5234 U/L

3 (Fl)

4M5219P .25 .50 .75

.013/.0005 .076/.0030 .025/.0010 .076/.0030

63.983/2.5190 68.885/2.7120 64.003/2.5198 68.903/2.7127 4 63.983/2.5190 68.885/2.7120 64.003/2.5198 68.903/2.7127 To be discontinued when stock exhausted.

2.435/0.0959 .013/.0005 .076/.0030 2.435/0.0959 .025/.0010 .076/.0030

25.75/1.014

F780

27.00/1.063

F780

5219 U/L 5234 U/L

* DIMENSIONAL INFORMATION FOR 4M5219P Overall Width (Nominal) Increase in Width 0.25 mm u/s shaft 1.014" +0.004" 0.50 mm u/s shaft 1.014" +0.004" 0.75 mm u/s shaft 1.014" +0.004"

4C048AS

Cam 1

Std. 2,3 4

51.000/2.0079 51.020/2.0087 51.000/2.0079 51.020/2.0087

54.676/2.1526 54.727/2.1546 54.176/2.1329 54.226/2.1349

51.000/2.0079 51.020/2.0087

54.676/2.1526 54.727/2.1546

ENGINE

VIN CYL

2954cc (3.0) Duratec 2968cc (3.0) Duratec 183 (3.0) Duratec

6B4395A Std. .25 .50 .75

V6 V6 V6

1.830/0.0720

24.38/0.960

F23

F-48-1

1.570/0.0618

13.77/0.542

F23

F-48-2

1.830/0.0720

13.77/0.542

F23

F-48-4A

Bore x Stroke 89 mm x 79.5 mm 89 mm x 79.5 mm 89 mm x 79.5 mm

TORQUE SETTINGS Connecting Rod + 90 degrees Step 3 Connecting Rod 17 ft.lbs/23 Nm Step 1 Connecting Rod 32 ft.lbs/43 Nm Step 2 Main Bearing Consult Service Manual

Rod - High Strength Aluminum Silicon material. 49.972/1.9674 53.015/2.0872 1.501/0.0591 .023/.0009 49.990/1.9681 53.035/2.0880 .077/.0030

338

18.00/0.709

F810

4395A

MAZDA Type and Location

Standard Shaft Size

Max. Bearing Thickness

Housing Bore

Vertical Oil Clearance

Max. Overall Length

Material Code

Qty. Set

Bearing Shell No.

Engine Set No. Sizes Available

(Contâ&#x20AC;&#x2122;d.) Main - High Strength Aluminum Silicon material. 62.969/2.4791 67.998/2.6771 2.502/0.0985 .020/.0008 1,2,3 62.992/2.4800 68.020/2.6779 .060/.0024

17.90/0.705

4 (Fl)

22.30/0.878

62.969/2.4791 62.992/2.4800

67.998/2.6771 68.020/2.6779

71.100/2.7992 71.350/2.8090

93.550/3.6831 93.800/3.6929

2.502/0.0985 .020/.0008 .064/.0025

21.46/0.845

7262A U/L

4M7262A Std. .25 .50 .75

7263A U/L 7263T

F100

RB4114

RB4114 Semi

VIN CYL

2977cc (3.0) HA Diesel 3455cc (3.5) SL Diesel 3455cc (3.5) SL Turbo Diesel

F810

1.95/0.077

Small End - single pieces, not bored. 21.011/0.8272 24.030/0.9461 21.013/0.8273 24.038/0.9464

ENGINE

F810

L4 L4 L4

Bore x Stroke

TORQUE SETTINGS

95mm x 105mm 100mm x 110mm 100mm x 110mm

Connecting Rod 55-60 ft.lbs/75-81Nm Main Bearing 80-85 ft.lbs/108-115 Nm

Rod

Main 1,2,3,4,5

61.112/2.4060 61.125/2.4065

64.826/2.5522 64.846/2.5530

1.836/0.0723 .036/.0014 .088/.0035

28.65/1.128

75.812/2.9847 75.825/2.9852

80.066/3.1522 80.092/3.1532

2.103/0.0828 .036/.0014 .100/.0039

28.60/1.126

Thrust 3

84.500/3.3268 101.400/3.9921 (Nominal I.D.) (Nominal O.D.) Note: Set includes 4 pieces, use on No. 3 position. Required with 5M1777 main set. Small End - for HA engines up to 9/80. 31.744/1.2498 34.919/1.3748 31.749/1.2500 34.955/1.3762

2.33/0.092

1.610/0.0634

26.80/1.055

F780

F250

F100

4B1776

1776 IH

Std. .25 .50 .75 1.0

1777 IH

Std. .25 .50 .75 1.0

5M1777

1777T U/L

2T1777

RB4059

Std.

Semi

Small End - for SL engines. 33.980/1.3378 37.000/1.4567 34.000/1.3386 37.025/1.4577

34.30/1.350

Small End - for HA engines 10/80 on, not bored. 33.000/1.2992 33.020/1.3000

34.30/1.350

F100

RB4078

RB4078 Semi

RB4088

RB4088 Semi

ENGINE

VIN CYL

Bore x Stroke

4016cc (4.0) OHV (Ford Eng.)

100mm x 84mm

F100

TORQUE SETTINGS

Connecting Rod 18-24 ft.lbs/25-32 Nm Main Bearing 66-77 ft.lbs/90-105 Nm

Rod 53.980/2.1252 54.000/2.1260

56.820/2.2370 56.840/2.2378

1.410/0.0555 .012/.0005 .078/.0030

16.48/0.649

Rod - .002" oversize OD version of 6B723P. 53.980/2.1252 56.869/2.2390 1.559/0.0614 .005/.0002 54.000/2.1260 56.891/2.2400 (@ .010" u/s) .073/.0029

16.48/0.649

Main 1,2,4 Upper

21.59/0.850

1,2,4 Lower 3 (Fl)

56.980/2.2433 57.000/2.2441

60.620/2.3866 60.640/2.3874

1.806/0.0711 .015/.0006 .081/.0032

56.980/2.2433 60.620/2.3866 1.806/0.0711 57.000/2.2441 60.640/2.3874 56.980/2.2433 60.620/2.3866 1.806/0.0711 57.000/2.2441 60.640/2.3874 Overflange length remains constant for standard and undersizes.

.015/.0006 .081/.0032 .015/.0006 .081/.0032

339

F780

21.59/0.850

F780

26.29/1.035

F780

1656 IH 9060 IH 1657 U 1663 L 1658 IH

6B723P Std. 10 20 30 40

6B723PO/S2 10 20 30 40

4M2006P Std. 10 20 30

MAZDA Engine Set No. Sizes Available

Type and Location

Max. Overall Length

Material Code

Qty. Set

Bearing Shell No.

Cam - Optional set to 4C1441S with 0.830" wide #4 cam. 49.555/1.9510 52.756/2.0770 1.570/0.0619 1 49.581/1.9520 52.807/2.0790

19.80/0.780

F23

F-50-1

49.200/1.9370 49.225/1.9380

52.375/2.0620 52.426/2.0640

1.560/0.0614

17.90/0.705

F23

F-50-2

48.819/1.9220 48.844/1.9230 48.438/1.9070 48.463/1.9080

51.994/2.0470 52.045/2.0490 51.615/2.0321 51.666/2.0341

1.560/0.0614

17.90/0.705

F23

F-50-3

1.560/0.0614

21.12/0.830

F23

F-50-4A

49.555/1.9510 49.581/1.9520

52.756/2.0770 52.807/2.0790

1.570/0.0619

19.80/0.780

F23

F-50-1

49.200/1.9370 49.225/1.9380

52.375/2.0620 52.426/2.0640

1.560/0.0614

17.90/0.705

F23

F-50-2

48.819/1.9220 48.844/1.9230 48.438/1.9070 48.463/1.9080

51.994/2.0470 52.045/2.0490 51.615/2.0321 51.666/2.0341

1.560/0.0614

17.90/0.705

F23

F-50-3

1.560/0.0614

15.10/0.595

F23

F-50-4

Standard Shaft Size

Housing Bore

Max. Bearing Thickness

Vertical Oil Clearance

27 (Contâ&#x20AC;&#x2122;d.) 4C1441AS Std.

4C1441S

Cam 1

Std.

ENGINE

VIN CYL

3784cc (3.8) YA Diesel 4052cc (4.0) XB Diesel 4052cc (4.0) ZB Diesel

6B1746 Std. .25 .50 .75 1.0

6B1760 Std. .25 .50 .75 1.0

7M1747

Std.

RB4059 Semi

TORQUE SETTINGS

88.9mm x 101.6mm Connecting Rod 40-45 ft.lbs/54-61Nm 92mm x 101.6mm Main Bearing 80-85 ft.lbs/108-115 Nm 92mm x 101.6mm

Rod - for 1969 to 1980 engines only. 57.112/2.2485 60.833/2.3950 57.125/2.2490 60.846/2.3955

1.840/0.0724 .028/.0011 .080/.0031

28.55/1.124

F780

1746 IH

Rod - for 1981 to 1988 engines only. 57.112/2.2485 60.833/2.3950 57.125/2.2490 60.846/2.3955

1.840/0.0724 .028/.0011 .080/.0031

28.55/1.124

F780

1760 IH

2.100/0.0827 .041/.0016 .106/.0042

28.60/1.126

F780

1747 IH

2.31/0.091

F100

1747T U/L

26.80/1.055

F100

RB4059

Main 1-7

Std. .25 .50 .75 1.0

2T1747

L6 L6 L6

Bore x Stroke

69.812/2.7485 69.825/2.7490

74.066/2.9160 74.092/2.9170

Thrust 4

78.500/3.0905 95.000/3.7402 (Nominal I.D.) (Nominal O.D.) Note: Set includes 4 pieces, use on No. 4 position. Required with 7M1747 main set. Small End 31.744/1.2498 31.749/1.2500

34.919/1.3748 34.955/1.3762

1.610/0.0634

ENGINE

VIN CYL

Bore x Stroke

4016cc (4.0) SOHC (Ford Eng.)

3.95 x 3.32

TORQUE SETTINGS Connecting Rod 18-24 ft.lbs/25-32 Nm Main Bearing 66-77 ft.lbs/89-104 Nm

Rod

6B723P

53.980/2.1252 54.000/2.1260

Std. 10 20 30 40

6B723PO/S2 10 20 30 40

4M2006P Std. 10 20 30

56.820/2.2370 56.840/2.2378

1.410/0.0555 .012/.0005 .078/.0030

Rod - .002" oversize OD version of 6B723P. 53.980/2.1252 56.869/2.2390 1.559/0.0614 .005/.0002 54.000/2.1260 56.891/2.2400 (@ .010" u/s) .073/.0029 Main 1,2,4 Upper 1,2,4 Lower 3 (Fl)

56.980/2.2433 57.000/2.2441 56.980/2.2433 57.000/2.2441 56.980/2.2433 57.000/2.2441

60.620/2.3866 60.640/2.3874 60.620/2.3866 60.640/2.3874 60.620/2.3866 60.640/2.3874

1.806/0.0711 .015/.0006 .081/.0032 1.806/0.0711 .015/.0006 .081/.0032 1.806/0.0711 .015/.0006 .081/.0032

340

16.48/0.649

F780

1656 IH

16.48/0.649

F780

9060 IH

21.59/0.850

F780

21.59/0.850

F780

26.29/1.035

F780

1657 U 1663 L 1658 IH

MAZDA Type and Location

Standard Shaft Size

Housing Bore

Max. Bearing Thickness

Vertical Oil Clearance

Max. Overall Length

Material Code

Qty. Set

Bearing Shell No.

Engine Set No. Sizes Available

(Contâ&#x20AC;&#x2122;d.) AR Auxiliary Front

47.046/1.8522

1.549/0.0610

29.00/1.142

F23

FG-53-1

Rear

45.903/1.8072

1.549/0.0610

22.98/0.905

F23

FG-53-2

2C6002S Std.

341

MAZDA PERFORMANCE MAZDA PERFORMANCE ENGINE INDEX Engine Disp.

Notation

1597cc (1.6).........

SOHC/DOHC (Incl Turbo) (B6) SOHC/DOHC (BP)

1839cc (1.8).........

Engine Set No. Sizes Available

Type and Location

Standard Shaft Size

ENGINE

Std. .025 .25

4B8351HX Std.

Rod - Race Series. 44.940/1.7693 44.956/1.7699

Main - Race Series. 49.938/1.9661 1-5 Std. .025 .25 .50 49.956/1.9668 1-5

Std.

RB4108 Semi

49.938/1.9661 49.956/1.9668

4B8170HX Std.

90-02

Housing Bore

L4 L4

47.996/1.8896 48.016/1.8904

Notation

2260cc (2.3).........

Max. Bearing Thickness

Vertical Oil Clearance

Bore x Stroke 78mm x 84mm 83mm x 85mm

VIN

Duratec

Max. Overall Length

Cyl. L4

Material Code

Qty. Set

Year Line 03-06

Bearing Shell No.

TORQUE SETTINGS Connecting Rod 35-38 ft.lbs/47-52 Nm (SOHC) Connecting Rod 37-40 ft.lbs/50-54 Nm (DOHC) Main Bearing 40-43 ft.lbs/54-58 Nm (All engines)

1.515/0.0596 .016/.0006 .066/.0026

17.00/0.669

F781

8351H IH

53.998/2.1259 54.018/2.1267

2.013/0.0793 .016/.0006 .070/.0028

17.83/0.702

F780

8353H L

53.998/2.1259 54.018/2.1267

2.013/0.0793 .016/.0006 .070/.0028

17.83/0.702

F780

8354H U

F780

8354HX U

53.998/2.1259 54.018/2.1267

2.000/0.0787 .041/.0016 .096/.0038

57.100/2.2480 68.830/2.7098 2.55/0.100 (Nominal I.D.) (Nominal O.D.) Note: Set includes two pieces, use on No. 4 position. Required with 5M8353H/HX main set.

F250

8353T IH

F100

RB4108

Thrust 4

Small End - suits DOHC engines only. 19.993/0.7871 23.000/0.9055 (Nominal) (Nominal)

VIN CYL

2260cc (2.3) Duratec

Std. .025 .25

17.83/0.702

ENGINE

4B8170H

86-01

Main - Race Series. Bearings are .0005" thinner per half to give .001" extra clearance for standard sized crankshafts. 49.938/1.9661 53.998/2.1259 2.000/0.0787 .041/.0016 17.83/0.702 F780 5 8353HX 1-5 49.956/1.9668 54.018/2.1267 .096/.0038 L 1-5

1T8353

Year Line Engine Disp.

Rod - Race Series. Bearings are .0005" thinner per half to give .001" extra clearance for standard sized crankshafts. 44.940/1.7693 47.996/1.8896 1.502/0.0591 .041/.0016 17.00/0.669 F781 8 8351HX 44.956/1.7699 48.016/1.8904 .091/.0036 IH

5M8353H

5M8353HX

Cyl.

VIN CYL

1597cc (1.6) SOHC/DOHC (Incl Turbo) (B6) 1839cc (1.8) SOHC/DOHC (BP)

4B8351H

VIN

Rod - Race Series. 49.980/1.9677 50.000/1.9685

53.025/2.0876 53.045/2.0884

21.80/0.858

Bore x Stroke 87.4mm x 94mm

TORQUE SETTINGS Connecting Rod 26 ft.lbs + 90 deg Main Bearing 63 ft.lbs (Tighten thrust position last)

1.500/0.0591 .026/.0010 .052/.0020

16.80/0.661

F781

8170H IH

Rod - Race Series. Bearings are .0005" thinner per half to give .001" extra clearance for standard sized crankshafts. 49.980/1.9677 53.025/2.0876 1.487/0.0585 .052/.0020 16.80/0.661 F781 8 8170HX 50.000/1.9685 53.045/2.0884 .077/.0030 IH

342

MERCURY MERCURY ENGINE INDEX Engine Disp.

Notation

98 1598cc (1.6)..... OHC 98 1598cc (1.6)..... OHC 98 1598cc (1.6)..... OHC 98 1598cc (1.6)..... SOHC (Mazda B6) 98 1598cc (1.6)..... DOHC (Mazda B6), Turbo 98 1598cc (1.6)..... SOHC (Mazda B6) 98 1598cc (1.6)..... OHV (Kent / Pinto) 98 1598cc (1.6)..... SOHC (Mazda B6) 112 (1.8) ............... DOHC (Mazda BP) 116 (1.9) ............... SOHC 116 (1.9) ............... SOHC 121 1989cc (2.0)... DOHC (Zetec) 122 1989cc (2.0)... OHC (Pinto) 122 1989cc (2.0)... Mazda RF,Diesel 122 1989cc (2.0)... SOHC 140 (2.3) ............... OHC 140 (2.3) ............... OHC 140 (2.3) ............... OHC 140 (2.3) ............... OHV (HSC) 140 (2.3) ............... OHV (HSC) 140 (2.3) ............... OHC, Turbo 140 (2.3) ............... OHV (HSC) 140 (2.3) ............... OHC 140 (2.3) ............... Duratec 144 (2.4) ............... 155 2450cc (2.5)... Duratec 153 (2.5) ............... OHV (HSC) 2606cc (2.6)......... 170 (2.8) ............... 170 (2.8) ............... 171 (2.8) ............... 171 (2.8) ............... 182 (3.0) ............... Duratec 182 (3.0) ............... SOHC (Nissan VG30E) 182 (3.0) ............... Duratec 182 (3.0) ............... Duratec 182 (3.0) ............... OHV (Vulcan) 182 (3.0) ............... SOHC (Nissan VG30E) 3275cc (3.3)......... SOHC (Nissan VG33E) 3275cc (3.3)......... SOHC (Nissan VG33E) 200 (3.3) ............... 200 (3.3) ............... 7 Main 200 (3.3) ............... 7 Main 200 (3.3) ............... 7 Main 200 (3.3) ............... 7 Main 221 (3.6) ............... 232 (3.8) ............... OHV 232 (3.8) ............... OHV

VIN

Cyl.

2 4 5 5 6 7 L Z 8 9 J 3

L4 L4 L4 L4 L4 L4 L4 L4 L4 L4 L4 L4 L4 L4 L4 L4 L4 L4 L4 L4 L4 L4 L4 L4 L6 V6 L4 V6 L6 L6 V6 V6 V6 V6 V6 V6 V6 V6 V6 V6 L6 L6 L6 L6 L6 V8 V6 V6

H P 6 A R S W X Y Z L D U Z 1 1 2 S U W T B T X 3 4

Year Line Engine Disp. 81-85 82-85 83-84 88-89 91-94 87-87 71-72 91-94 91-96 85-87 86-96 95-02 71-74 84-87 97-99 76-77 83-84 80-86 84-87 85-91 79-86 85-94 75-79 05-06 60-63 95-02 86-86 72-73 61-64 71-72 74-77 75-79 05-05 97-98 01-04 96-05 86-05 93-96 99-99 00-02 63-64 65-67 80-82 68-79 83-83 62-63 82-87 87-97

2 2 2 3 3 3 1 3 3 4 4 8 6 7 5 9 9 9 10 10 9 10 9 11 12 13 10 14 12 12 14 14 13 16 13 13 15 16 16 16 12 17 17 17 17 18 19 19

232 (3.8) ............... 232 (3.8) ............... 232 (3.8) ............... 245 (4.0) ............... 245 (4.0) ............... 250 (4.1) ............... 250 (4.1) ............... 255 (4.2) ............... 256 (4.2) ............... 260 (4.3) ............... 281 (4.6) ............... 281 (4.6) ............... 289 (4.7) ............... 289 (4.7) ............... 302 (5.0) ............... 302 (5.0) ............... 302 (5.0) ............... 302 (5.0) ............... 302 (5.0) ............... 302 (5.0) ............... 351 (5.8) ............... 351 (5.8) ............... 351 (5.8) ............... 351 (5.8) ............... 351 (5.8) ............... 351 (5.8) ............... 351 (5.8) ............... 351 (5.8) ............... 390 (6.4) ............... 390 (6.4) ............... 390 (6.4) ............... 390 (6.4) ............... 390 (6.4) ............... 400 (6.6) ............... 410 (6.7) ............... 427 (7.0) ............... 427 (7.0) ............... 428 (7.0) ............... 428 (7.0) ............... 428 (7.0) ............... 428 (7.0) ............... 429 (7.0) ............... 429 (7.0) ............... 429 (7.0) ............... 429 (7.0) ............... 429 (7.0) ............... 460 (7.5) ............... 460 (7.5) ...............

Notation

VIN

Cyl.

OHV OHV, Supercharged OHV, Supercharged SOHC SOHC

OHV

C C R E K C L D 2

SOHC SOHC

6 W

Windsor Cleveland Modified Windsor Cleveland Windsor Cleveland Windsor

C F G J M P T G H H H M M Q Q

V6 V6 V6 V6 V6 L6 L6 V8 V6 V8 V8 V8 V8 V8 V8 V8 V8 V8 V8 V8 V8 V8 V8 V8 V8 V8 V8 V8 V8 V8 V8 V8 V8 V8 V8 V8 V8 V8 V8 V8 V8 V8 V8 V8 V8 V8 V8 V8

S X Y Z S W P Q R C J K N Z A C

Year Line 84-84 89-89 90-90 98-03 02-03 80-80 69-79 80-82 04-05 63-64 96-96 92-05 64-67 68-68 68-91 69-70 68-68 84-86 97-01 91-93 80-89 70-74 75-79 69-79 70-71 69-71 72-74 72-74 64-67 68-69 68-70 68-70 68-68 71-78 66-67 65-67 68-68 66-67 68-70 68-70 68-70 70-71 71-71 69-71 69-73 70-70 72-78 73-78

19 19 19 20 20 21 21 18 22 18 23 23 18 18 18 18 18 18 18 18 24 25 26 24 25 24 25 24 27 27 27 27 27 26 27 27 27 27 27 27 27 28 28 28 28 28 28 28

MERCURY MODEL INDEX Model BOBCAT BREEZEWAY

BROUGHAM CALIENTE

CAPRI

CID 140 171 390 410 427 428 410 427 428 200 200 260 289 390 427 98 98 122 140 200

1598 1598 1989 2606

CAPRI - GHIA

171 232 255 302 140

Liter 2.3 2.8 6.4 6.7 7.0 7.0 6.7 7.0 7.0 3.3 3.3 4.3 4.7 6.4 7.0 1.6 1.6 2.0 2.3 3.3 2.6 2.8 3.8 4.2 5.0 2.3

Description OHC

7 Main

OHV (Kent / Pinto) SOHC (Mazda B6) OHC (Pinto) OHC 7 Main OHV OHC

Years 75-80 75-79 65-67 66-67 65-67 66-67 67 67 67 64 65-67 64 64-67 66-67 65 71-72 91-94 71-74 76-86 66-82 72-73 74-79 83-86 80-82 79-86 79-80

Model CAPRI - GHIA

CAPRI - XR2 COLONY PARK

COMET

343

CID 200 171 255 302 98 302 351 351 351 390 400 410 427 428 429 460 144 170 200 200 250 260 289 302 351 390

1598

Liter 3.3 2.8 4.2 5.0 1.6 5.0 5.8 5.8 5.8 6.4 6.6 6.7 7.0 7.0 7.0 7.5 2.4 2.8 3.3 3.3 4.1 4.3 4.7 5.0 5.8 6.4

Description 7 Main

DOHC (Mazda B6) Cleveland Modified Windsor

7 Main

Windsor

Years 79-80 79 80 79 91-94 79-91 71-73 79 71-81 64-70 71-76 66-67 65-67 66-68 69-73 72-76 60-63 61-72 64 65-77 69-77 63-64 64-67 68-77 69 66-69

MERCURY MERCURY MODEL INDEX (Cont’d.) Model COMET COMMUTER

COUGAR

COUGAR - 30TH ANNIVERSARY COUGAR - BOSS 302 COUGAR - BOSS 429 COUGAR BROUGHAM

COUGAR BROUGHAM VILLAGER COUGAR - COBRA JET COUGAR - LS COUGAR - XR-7

COUNTRY CRUISER CYCLONE

CYCLONE - CJ CYCLONE - GT

CYCLONE - SPOILER

CID 427 289 390 410 427 428 121 140 200 155 232 255 289 302 351 351 351 390 400 427 428 429 460

1989 2450

Liter 7.0 4.7 6.4 6.7 7.0 7.0 2.0 2.3 3.3 2.5 3.8 4.2 4.7 5.0 5.8 5.8 5.8 6.4 6.6 7.0 7.0 7.0 7.5

Description

DOHC (Zetec) OHC 7 Main Duratec OHV

Cleveland Modified Windsor

Years 65-67 67 64-68 66-67 65-67 66-68 99-02 81-86 81-82 99-02 82-86 81 67-68 68-86 70-73 75-79 69-79 67-69 75-78 68 68-70 71 75

232 281 302 429

3.8 OHV 4.6 SOHC 5.0 7.0

97 97 69 70

302 351 351 400

5.0 5.8 Modified 5.8 Windsor 6.6

77 77 77 77

351 351 400

5.8 Modified 5.8 Windsor 6.6

77 77 77

428 429 232 302 200 232 255 281 289 302 351 351 351 390 400 427 428 429 460 200 221 200 260 289 302 351 351 390 427 428 429 302 428 302 351 351 429 351 351 429

7.0 7.0 3.8 5.0 3.3 3.8 4.2 4.6 4.7 5.0 5.8 5.8 5.8 6.4 6.6 7.0 7.0 7.0 7.5 3.3 3.6 3.3 4.3 4.7 5.0 5.8 5.8 6.4 7.0 7.0 7.0 5.0 7.0 5.0 5.8 5.8 7.0 5.8 5.8 7.0

69-70 71 87-92 87-92 80-82 82-97 80-82 94-97 67 68-93 70-74 76-79 69-79 67-69 73-78 68 68-70 71 73-76 63 63 64 64 64-67 68-69 70-71 69-71 66-69 65-68 68-69 70-71 69 69 70 70-71 70-71 70-71 71 71 70-71

OHV 7 Main OHV SOHC Cleveland Modified Windsor

Cleveland Windsor

Cleveland Windsor Cleveland Windsor

Model GRAND MARQUIS

GRAND MARQUIS COLONY PARK LN7 LYNX LYNX - LTS LYNX - RS LYNX - XR3 MARAUDER MARAUDER - X-100 MARINER MARINER CONVENIENCE MARINER - PREMIER MARQUIS

MARQUIS BROUGHAM

METEOR MILAN MILAN - PREMIER MONARCH

MONARCH - GHIA

MONTCLAIR

MONTEGO

344

CID

Liter

Description

Years

255 281 302 351 351 400 460

4.2 4.6 SOHC 5.0 5.8 Modified 5.8 Windsor 6.6 7.5

81-82 92-05 79-91 78-79 78-89 75-78 75-78

302 351 98 98 116 122 98 98 116 390 427 429 429 140

5.0 5.8 1.6 1.6 1.9 2.0 1.6 1.6 1.9 6.4 7.0 7.0 7.0 2.3

83 86 82-83 81-85 85-87 84-87 84 84 86-87 64-70 65 69-70 69-70 05

1598 1598 1989 1598 1598

Windsor OHC OHC SOHC Mazda RF OHC OHC SOHC

Duratec

140 182 140 200 232 255 302 351 351 351 390 400 410 427 428 429 460

2.3 3.0 2.3 3.3 3.8 4.2 5.0 5.8 5.8 5.8 6.4 6.6 6.7 7.0 7.0 7.0 7.5

Duratec Duratec OHC 7 Main OHV

140 200 232 255 302 351 351 351 390 400 429 460 170 200 221 140 140 200 250 255 302 351 351 250 302 351 351 390 410 427 428 200 250 302 351 351 351 390

2.3 3.3 3.8 4.2 5.0 5.8 5.8 5.8 6.4 6.6 7.0 7.5 2.8 3.3 3.6 2.3 2.3 3.3 4.1 4.2 5.0 5.8 5.8 4.1 5.0 5.8 5.8 6.4 6.7 7.0 7.0 3.3 4.1 5.0 5.8 5.8 5.8 6.4

OHC 7 Main OHV

Cleveland Modified Windsor

Duratec Duratec 7 Main

Modified Windsor Modified Windsor

7 Main Cleveland Modified Windsor

06 05 83-86 83 83-86 81-82 79-85 71-73 78-79 71-81 68-70 71-78 67 67 67-69 69-73 72-78 83-86 83 83-86 81-82 79-82 71-73 78-79 71-82 70 72-78 70-73 72-78 61-63 63 62-63 06 06 75-77 75-80 80 75-80 75-77 75-77 75-77 75-77 75-77 75-77 64-68 66-67 65-67 66-68 68 69-74 68-74 70-74 75-76 69-76 68-69

MERCURY MERCURY MODEL INDEX (Cont’d.) Model MONTEGO

MONTEGO - GT

MONTEGO - MX

MONTEGO - MX BROUGHAM

MONTEGO VILLAGER

MONTEREY

MONTEREY CUSTOM

MONTEREY PREMIER MOUNTAINEER Type and Location

CID

Liter

Description

Years

400 427 428 429 460 302 351 351 400 429 200 250 302 351 351 351 390 400 428 429 460

6.6 7.0 7.0 7.0 7.5 5.0 5.8 5.8 6.6 7.0 3.3 4.1 5.0 5.8 5.8 5.8 6.4 6.6 7.0 7.0 7.5

250 302 351 351 351 400 429 460

4.1 5.0 5.8 Cleveland 5.8 Modified 5.8 Windsor 6.6 7.0 7.5

70-72 70-74 70-74 75-76 70-76 72-76 70-73 74-76

250 302 351 351 351 400 429 460 256 351 351 390 400 410 427 428 429 460

4.1 5.0 5.8 5.8 5.8 6.6 7.0 7.5 4.2 5.8 5.8 6.4 6.6 6.7 7.0 7.0 7.0 7.5

70-72 70-74 70-74 75-76 70-76 72-76 72-73 74-76 04-05 71-73 71-73 64-70 71-74 66-67 65-67 66-70 69-73 72-74

351 351 390 400 428 429 460

5.8 Cleveland 5.8 Windsor 6.4 6.6 7.0 7.0 7.5

71-73 71-73 69-70 71-74 69-70 69-73 72-74

256 245

4.2 OHV 4.0 SOHC

04 98-03

Cleveland Windsor 7 Main Cleveland Modified Windsor

72-76 68 68 70-73 76 72-73 72-73 72-73 72-73 72-73 68 69-73 68-74 70-74 75-76 69-76 68-69 72-76 69 70-73 73-76

Model

CID

MOUNTAINEER MOUNTAINEER PREMIER MYSTIQUE

281 121 155 121 155 121 155

MYSTIQUE - GS MYSTIQUE - LS MYSTIQUE - YOUNG AMERICA PARK LANE

PARKLANE S-55

SABLE

Cleveland Modified Windsor

OHV Cleveland Windsor

TOPAZ TRACER TRACER - LS TRACER - LTS TRACER - TRIO VILLAGER

ENGINE

Max. Bearing Thickness

Housing Bore

VIN CYL

98 1598cc (1.6) OHV (Kent / Pinto) L

155 390 410 427 428 428 390 410 427 428 153 182 182 232 122 140 182 98 116 122 122 112 116 122 144 200 200 182

1989 2450 1989 2450 1989 2450 2450

1989 1598 1989 1989 1989

3275 260 289 390 427 200 289 390 140 200 255 302 140 200 140 200 255 302

VOYAGER ZEPHYR

Standard Shaft Size

281 302

ZEPHYR - GS ZEPHYR - Z7

Vertical Oil Clearance

Bore x Stroke 3.19 x 3.06

Max. Overall Length

Material Code

Qty. Set

Liter

Description

Years

4.6 SOHC 5.0

02-05 97-01

4.6 2.0 2.5 2.0 2.5 2.0 2.5

SOHC DOHC (Zetec) Duratec DOHC (Zetec) Duratec DOHC (Zetec) Duratec

04 99-00 99-00 95-98 95-98 95-98 96-98

2.5 6.4 6.7 7.0 7.0 7.0 6.4 6.7 7.0 7.0 2.5 3.0 3.0 3.8 2.0 2.3 3.0 1.6 1.9 2.0 2.0 1.8 1.9 2.0 2.4 3.3 3.3 3.0

Duratec

95 64-68 66-67 65-67 66-68 68 66 66 66 66 86 96-05 86-05 88-95 84-86 84-94 92-94 87-89 91-93 99 97-98 91-96 94-96 97-98 62-63 64 65-67 93-98

OHV (HSC) Duratec OHV (Vulcan) OHV Mazda RF OHV (HSC) OHV (Vulcan) SOHC (Mazda B6) SOHC SOHC SOHC DOHC (Mazda BP) SOHC SOHC

7 Main SOHC (Nissan VG30E) 3.3 SOHC (Nissan VG33E) 4.3 4.7 6.4 7.0 3.3 7 Main 4.7 6.4 2.3 OHC 3.3 7 Main 4.2 5.0 2.3 OHC 3.3 7 Main 2.3 OHC 3.3 7 Main 4.2 5.0

Bearing Shell No.

99-02 63-64 64-67 66-67 65 66-67 66-67 66-67 78-82 78-82 80-82 78-79 83 83 78-83 78-83 80-81 78-79

Engine Set No. Sizes Available

TORQUE SETTINGS

Connecting Rod 30-35 ft.lbs/41-47 Nm Main Bearing 55-60 ft.lbs/75-81 Nm

Rod 49.200/1.9370 49.212/1.9375

52.896/2.0825 52.908/2.0830

1.835/0.0722 .015/.0006 .064/.0025

Main - .015" oversize OD version of 5M742P. 53.988/2.1255 58.064/2.2860 2.027/0.0798 .013/.0005 1-5 54.000/2.1260 58.077/2.2865 .056/.0022

345

22.35/0.880

25.53/1.005

F780

4B603P

5216 IH

Std. 10 20 30 40

2152+015 IH

Std. 10 20 30 40

5M2152+015

MERCURY Engine Set No. Sizes Available

Type and Location

Max. Overall Length

Material Code

Qty. Set

Bearing Shell No.

25.53/1.005

F780

2152 IH

59.436/2.3400 74.498/2.9330 2.36/0.093 59.690/2.3500 74.752/2.9430 Note: Set includes two pieces, use on No. 3 position. Required with 5M742P/5M2152+015 main set.

F250

2152T IH

Housing Bore

53.988/2.1255 54.000/2.1260

57.683/2.2710 57.696/2.2715

Max. Bearing Thickness

Vertical Oil Clearance

(Contâ&#x20AC;&#x2122;d.) 5M742P

Main 1-5

Std. 10 20 30 40

1T113S Std. +.005

3C711S

Cam 1 2 3

RB902 Semi

1C1094S Std.

1.840/0.0724 .013/.0005 .056/.0022

Thrust 3

Std.

Standard Shaft Size

39.616/1.5597 39.637/1.5605

42.888/1.6885 42.913/1.6895

1.610/0.0633

20.19/0.795

F23

F-28-1

39.616/1.5597 39.637/1.5605 39.616/1.5597 39.637/1.5605

42.888/1.6885 42.913/1.6895 42.888/1.6885 42.913/1.6895

1.610/0.0633

17.53/0.690

F23

F-28-2

1.610/0.0633

20.19/0.795

F23

F-28-3

26.67/1.050

F100

RB902

12.95/0.510

F23

FG-29

Small End - not bored - single pieces. 20.625/0.8120 22.327/0.8790 20.632/0.8123 22.352/0.8800 AR Auxiliary 41.953/1.6517 Front 41.978/1.6527

45.072/1.7745 45.099/1.7755

1.571/0.0619 .014/.0006 .081/.0032

ENGINE

VIN CYL

Bore x Stroke

98 1598cc (1.6) OHC 98 1598cc (1.6) OHC 98 1598cc (1.6) OHC

2 4 5

3.156 x 3.125 3.156 x 3.125 3.156 x 3.125

L4 L4 L4

TORQUE SETTINGS Connecting Rod 19-25 ft.lbs/26-34 Nm Main Bearing 67-80 ft.lbs/91-108 Nm

Rod

4B1276P

47.889/1.8854 47.909/1.8862

Std. 10 20 30

5M1557P Std. 10 20 30

50.889/2.0035 50.909/2.0043

1.487/0.0585 .006/.0002 .072/.0028

Main 1-5

57.981/2.2827 62.286/2.4522 2.138/0.0842 58.001/2.2835 62.300/2.4528 3 (Fl) 57.981/2.2827 62.286/2.4522 2.138/0.0842 58.001/2.2835 62.300/2.4528 Overflange length remains constant for standard and undersizes.

.010/.0004 .069/.0027 .010/.0004 .069/.0027

ENGINE

VIN CYL

Bore x Stroke

98 1598cc (1.6) SOHC (Mazda B6) 98 1598cc (1.6) DOHC (Mazda B6) Turbo 98 1598cc (1.6) SOHC (Mazda B6) 98 1598cc (1.6) SOHC (Mazda B6) 112 (1.8) DOHC (Mazda BP)

78mm x 84mm

6 7 Z 8

L4 L4 L4 L4

78mm x 84mm 78mm x 84mm 78mm x 84mm 83mm x 85mm

19.35/0.762

F780

5226 IH

22.45/0.884

F780

28.73/1.131

F780

5227 IH 5228 U

TORQUE SETTINGS Connecting Rod 35-38 ft.lbs/47-52 Nm (SOHC) Connecting Rod 37-40 ft.lbs/50-54 Nm (DOHC) Main Bearing 40-43 ft.lbs/54-58 Nm (All engines)

Rod

4B8351

44.940/1.7693 44.956/1.7699

47.996/1.8896 48.016/1.8904

1.510/0.0594 .020/.0008 .071/.0028

17.00/0.669

F810

8351A IH

49.938/1.9661 49.956/1.9668 49.938/1.9661 49.956/1.9668

53.998/2.1259 54.018/2.1267 53.998/2.1259 54.018/2.1267

2.010/0.0791 .022/.0009 .076/.0030 2.013/0.0793 .022/.0009 .076/.0030

17.50/0.689

F810

17.50/0.689

F810

8354A U 8353A L

Main - Full groove set. 49.938/1.9661 1-5 49.956/1.9668

53.998/2.1259 54.018/2.1267

2.013/0.0793 .016/.0006 .070/.0028

17.50/0.689

F810

8354A IH

57.100/2.2480 68.830/2.7098 (Nominal I.D.) (Nominal O.D.) Note: Set includes two pieces, use on No. 4 position. Required with 5M8353 main set.

2.55/0.100

F250

8353T IH

Std. .25 .50 .75 1.0

5M8353

Main 1-5

Std. .25 .50 .75 1.0 1-5

5M8354 Std. .25 .50

1T8353 Std.

Thrust 4

346

MERCURY Type and Location

Standard Shaft Size

Max. Bearing Thickness

Housing Bore

Vertical Oil Clearance

Max. Overall Length

Material Code

Qty. Set

Bearing Shell No.

Engine Set No. Sizes Available

(Contâ&#x20AC;&#x2122;d.) Small End - suits DOHC engines only. 19.993/0.7871 23.000/0.9055 (Nominal) (Nominal)

21.80/0.858

VIN CYL

Bore x Stroke

116 (1.9) SOHC 116 (1.9) SOHC

9 J

3.23 x 3.46 3.23 x 3.46

L4 L4

1.487/0.0585 .006/.0002 .072/.0028

Rod - 1987-96 engines (1.7287" journal). 43.888/1.7279 46.888/1.8460 1.488/0.0586 .025/.0010 43.909/1.7287 46.909/1.8468 .071/.0028 To be superceded by 4B1380A when stock exhausted. 57.980/2.2827 58.000/2.2835

62.286/2.4522 62.300/2.4528

RB4108

TORQUE SETTINGS

2.128/0.0838 .030/.0012 .089/.0035

1,2,4,5

Connecting Rod 19-25 ft.lbs/20-34 Nm (1985-88 engines) Connecting Rod 26-30 ft.lbs/35-40 Nm (1989-96 engines) Main Bearing 67-80 ft.lbs/90-108 Nm

19.35/0.762

Rod - 1987-96 engines (1.7287" journal). High Strength Aluminum Silicon material. 43.888/1.7279 46.888/1.8460 1.488/0.0586 .025/.0010 19.50/0.768 43.909/1.7287 46.909/1.8468 .071/.0028

Main 1-5

Semi

ENGINE

Rod - 1985-86 engines (1.8862" journal). 47.889/1.8854 50.889/2.0035 47.909/1.8862 50.909/2.0043

F100

.030/.0012 .089/.0035 .030/.0012 .089/.0035

19.50/0.768

21.45/0.844

F780

F810

F780

22.45/0.884

F780

28.73/1.131

F780

4B1276P

5226 IH

Std. 10 20 30

5231A IH

Std. .25 .50

5231 IH

Std. .25 .50 .75 1.0

5235 L

Std. .25 .50 .75

4B1380A

4B1380P

5M1706P

5236 U 5237 U

Cam Tower 1

48.349/1.9035

1.277/0.0503

23.50/0.925

F23

FA-1-1

2 3

48.222/1.8985 48.095/1.8935

1.214/0.0478 1.151/0.0453

23.50/0.925 23.50/0.925

F23 F23

1 1

FA-1-2 FA-1-3

47.968/1.8885

1.087/0.0428

23.50/0.925

F23

FA-1-4

47.841/1.8835

1.024/0.0403

23.50/0.925

F23

FA-1-5

5C6003S Std.

ENGINE

VIN CYL

Bore x Stroke

122 1989cc (2.0) SOHC

3.338 x 3.464

TORQUE SETTINGS

Connecting Rod 26-30 ft.lbs/35-41 Nm Main Bearing 66-79 ft.lbs/89-107 Nm

Rod - 1987-96 engines (1.7287" journal). High Strength Aluminum Silicon material. 43.888/1.7279 46.888/1.8460 1.488/0.0586 .025/.0010 19.50/0.768 43.909/1.7287 46.909/1.8468 .071/.0028

F810

4B1380A

5231A IH

Std. .25 .50

5231 IH

Std. .25 .50 .75 1.0

5235 L

Std. .25 .50 .75

Rod 43.888/1.7279 46.888/1.8460 1.488/0.0586 .025/.0010 43.909/1.7287 46.909/1.8468 .071/.0028 To be superceded by 4B1380A when stock exhausted. Main 1-5

19.50/0.768

F780

57.980/2.2827 58.000/2.2835

62.286/2.4522 62.300/2.4528

2.128/0.0838 .030/.0012 .089/.0035

21.45/0.844

1,2,4,5

57.980/2.2827 58.000/2.2835

62.286/2.4522 62.300/2.4528

2.128/0.0838 .030/.0012 .089/.0035

22.45/0.884

F780

5236 U

3(Fl)

57.980/2.2827 58.000/2.2835

62.286/2.4522 62.300/2.4528

2.128/0.0838 .030/.0012 .089/.0035

28.73/1.131

F780

5237 U

347

F780

4B1380P

5M1706P

MERCURY Engine Set No. Sizes Available

Type and Location

Standard Shaft Size

ENGINE

Housing Bore

VIN CYL

122 1989cc (2.0) OHC (Pinto)

Max. Bearing Thickness

Vertical Oil Clearance

Bore x Stroke 3.58 x 3.03

Max. Overall Length

Material Code

Qty. Set

Bearing Shell No.

TORQUE SETTINGS Connecting Rod 29-34 ft.lbs/39-46 Nm Main Bearing 65-75 ft.lbs/88-102 Nm

Rod

4B943P

51.990/2.0468 52.000/2.0472

55.000/2.1654 55.020/2.1661

1.490/0.0589 .008/.0003 .064/.0025

20.00/0.787

F780

5220 IH

56.980/2.2433 57.000/2.2441

60.620/2.3866 60.640/2.3874

1.810/0.0713 .010/.0004 .066/.0026

23.57/0.928

F780

5221 IH

63.600/2.5039 63.850/2.5138

80.240/3.1590 80.500/3.1693

2.35/0.093

F250

2167T U/L

41.990/1.6531 42.010/1.6539

45.085/1.7750 45.110/1.7760

1.520/0.0600

20.07/0.790

F23

F-29-1

44.610/1.7563 44.630/1.7571 44.990/1.7712 45.010/1.7720

47.700/1.8780 47.725/1.8790 48.082/1.8930 48.108/1.8940

1.520/0.0600

17.02/0.670

F23

F-29-2

1.520/0.0600

16.00/0.630

F23

F-29-3A

AR Auxiliary 41.953/1.6517 Front 41.978/1.6527

45.072/1.7745 45.099/1.7755

1.571/0.0619 .014/.0006 .081/.0032

12.95/0.510

F23

FG-29

Std. .25 .50 .75 1.0

5M1084P

Main 1-5

Std. .25 .50 .75 1.0

2T218S

Thrust 3

Std.

3C733S

Cam 1

Std. 2 3

1C1094S Std.

ENGINE

VIN CYL

Bore x Stroke

122 1989cc (2.0) Mazda RF Diesel

86mm x 86mm

TORQUE SETTINGS Connecting Rod 51-54 ft.lbs/69-73 Nm Main Bearing 61-65 ft.lbs/83-88 Nm

Rod

4B2130

50.940/2.0055 50.955/2.0061

54.002/2.1261 54.017/2.1266

1.510/0.0594 .027/.0011 .083/.0033

21.13/0.832

F810

2130A IH

59.940/2.3598 59.960/2.3606 59.940/2.3598 59.960/2.3606

63.999/2.5196 64.019/2.5204 63.999/2.5196 64.019/2.5204

2.007/0.0790 .025/.0010 .091/.0036 2.007/0.0790 .025/.0010 .091/.0036

19.13/0.753

F780

21.13/0.832

F780

2134 IH 2135 IH

68.800/2.7087 84.250/3.3169 (Nominal I.D.) (Nominal O.D.) Note: Set includes four pieces, use on No.3 position. Required with 5M2134 main set.

2.05/0.081

F250

2134T U/L

26.75/1.053

F100

RB4077

Std. .25 .50 .75 1.0

5M2134

Main 1,2,4,5

Std. .25 .50 .75 1.0 3

2T2134 Std.

RB4077 Semi

Thrust 3

Small End - not bored, single pieces. 24.987/0.9837 28.013/1.1029 25.000/0.9843 28.033/1.1037

ENGINE

VIN CYL

Bore x Stroke

121 1989cc (2.0) DOHC (Zetec)

84.8mm x 87.9mm

4B4135A Std. .25 .50 .75

4B4135AO/S2 .25 .50 .75

5M7193A Std. .25 .50 .75

TORQUE SETTINGS Connecting Rod 16-19 ft.lbs + 90 deg Main Bearing 13-16 ft.lbs + 90 deg

Rod - High Strength Aluminum Silicon material. 46.890/1.8461 49.890/1.9642 1.475/0.0581 .030/.0012 46.910/1.8468 49.910/1.9650 .086/.0034

20.10/0.791

F810

4135A IH

Rod - .002" oversize OD version of 4B4135A. 46.890/1.8461 49.940/1.9661 1.625/0.0640 .030/.0012 46.910/1.8468 49.960/1.9669 (@ 0.25mm u/size) .086/.0034

20.10/0.791

F810

9062A IH

Main - High Strength Aluminum Silicon material. 57.980/2.2827 62.287/2.4522 2.131/0.0839 .025/.0010 1,2,4,5 58.000/2.2835 62.300/2.4528 .074/.0029

19.21/0.756

F810

7193A U/L

3 (Fl)

24.68/0.972

F810

7195A U

57.980/2.2827 58.000/2.2835

62.287/2.4522 62.300/2.4528

2.131/0.0839 .025/.0010 .074/.0029

348

MERCURY Type and Location

Standard Shaft Size

ENGINE 140 (2.3) OHC 140 (2.3) OHC 140 (2.3) OHC 140 (2.3) OHC Turbo 140 (2.3) OHC

Max. Bearing Thickness

Housing Bore

VIN CYL 6 A W Y

L4 L4 L4 L4 L4

Vertical Oil Clearance

Bore x Stroke

Max. Overall Length

Material Code

Qty. Set

Bearing Shell No.

Engine Set No. Sizes Available

TORQUE SETTINGS

Connecting Rod 30-36 ft.lbs/40-48 Nm Main Bearing 80-90 ft.lbs/108-122 Nm

3.78 x 3.13 3.78 x 3.13 3.78 x 3.13 3.78 x 3.13 3.78 x 3.13

Rod 51.981/2.0465 51.999/2.0472

55.169/2.1720 55.189/2.1728

1.580/0.0624 .012/.0005 .076/.0030

20.32/0.800

Main - full groove. 60.914/2.3982 1,2,4,5 60.935/2.3990

65.791/2.5902 65.811/2.5910

2.428/0.0956 .012/.0005 .078/.0031

24.13/0.950

60.914/2.3982 65.791/2.5902 2.428/0.0956 .012/.0005 60.935/2.3990 65.811/2.5910 .078/.0031 Overflange length remains constant for standard and undersizes.

30.35/1.195

F780

2187 U/L

Cam - Special oil control bearing - differs from OEM design. 360 OD groove. 1-4 44.990/1.7713 48.275/1.9006 1.620/0.0638 17.73/0.698 45.010/1.7720 48.300/1.9016

F23

F-34-1B

3 (Fl)

Cam 1-4

F780

Std. 10 20 30

2185 U/L

Std. 10 20 30 40

1.620/0.0638

AR Auxiliary 41.960/1.6520 1 41.986/1.6530

45.644/1.7970 45.670/1.7980

1.810/0.0712

12.83/0.505

F23

AGB-34-1

45.136/1.7770 45.160/1.7780

1.550/0.0612

12.83/0.505

F23

AGB-34-2

4C777BS

F23

F-34-1

4C777S Std.

2C1095S Std.

ENGINE

VIN CYL

Bore x Stroke

140 (2.3) OHV (HSC) 140 (2.3) OHV (HSC) 140 (2.3) OHV (HSC) 153 (2.5) OHV (HSC)

R S X D

3.78 x 3.13 3.78 x 3.13 3.78 x 3.13 3.78 x 3.58

L4 L4 L4 L4

TORQUE SETTINGS

Connecting Rod 21-26 ft.lbs/29-35 Nm Main Bearing 51-66 ft.lbs/69-90 Nm

Rod - 1986-94 engines only. 53.929/2.1232 56.871/2.2390 53.950/2.1240 56.891/2.2398

1.458/0.0574 .005/.0002 .071/.0028

20.57/0.810

Rod - 1984-85 engines only. 53.934/2.1234 56.871/2.2390 53.945/2.1238 56.891/2.2398

1.458/0.0574 .010/.0004 .066/.0026

20.57/0.810

Main 1

5M1117P

Std.

48.275/1.9006 48.300/1.9016

41.960/1.6520 41.986/1.6530

4B984P

2186 IH

44.990/1.7713 45.010/1.7720

17.73/0.698

F780

Std. 10 20 30

2150 IH

Std. 10 20 30

5223 U

Std. 10 20 30

60.990/2.4012 61.011/2.4020

1.928/0.0759 .010/.0004 .071/.0028

25.90/1.020

2,4,5

57.109/2.2484 57.119/2.2488

60.995/2.4014 61.006/2.4018

1.928/0.0759 .020/.0008 .056/.0022

25.90/1.020

F780

2126 U

1-5

57.104/2.2482 57.125/2.2490

60.990/2.4012 61.011/2.4020

1.928/0.0759 .010/.0004 .071/.0028

25.90/1.020

F780

5224 L

57.104/2.2482 60.990/2.4012 1.928/0.0759 .010/.0004 57.125/2.2490 61.011/2.4020 .076/.0030 Overflange length remains constant for standard and undersizes.

32.28/1.271

F780

2127 U

349

4B1383P

5240 IH

57.104/2.2482 57.125/2.2490

3 (Fl)

F780

4B583P

5M1629P

MERCURY Engine Set No. Sizes Available

Type and Location

Standard Shaft Size

Housing Bore

Max. Bearing Thickness

Vertical Oil Clearance

Max. Overall Length

Material Code

Qty. Set

Bearing Shell No.

10 (Contâ&#x20AC;&#x2122;d.)

5M5222P 20

57.104/2.2482 57.125/2.2490

60.990/2.4012 61.011/2.4020

1.928/0.0759 .020/.0008 .056/.0022

25.90/1.020

F780

2126 U

1-5

57.104/2.2482 57.125/2.2490

60.990/2.4012 61.011/2.4020

1.928/0.0759 .010/.0004 .071/.0028

25.90/1.020

F780

5224 L

57.104/2.2482 60.990/2.4012 57.125/2.2490 61.011/2.4020 To be discontinued when stock exhausted.

1.928/0.0759 .010/.0004 .076/.0030

32.39/1.275

F780

5222 U

3 (Fl)

* DIMENSIONAL INFORMATION FOR 5M5222P Overall Width (Nominal) Increase in Width .020" u/s shaft 1.275" +.004"

4C1251S

Cam 1

Std. 2,3 4

50.988/2.0074 51.013/2.0084

55.988/2.2042 56.012/2.2052

2.470/0.0973

18.42/0.725

F23

F-46-1

50.988/2.0074 51.013/2.0084 50.988/2.0074 51.013/2.0084

55.588/2.1885 55.613/2.1895 55.988/2.2042 56.012/2.2052

2.270/0.0894

18.42/0.725

F23

F-46-2

2.470/0.0973

12.90/0.508

F23

F-46-3

ENGINE

VIN CYL

Bore x Stroke

140 (2.3) Duratec

87.4mm x 94mm

TORQUE SETTINGS Connecting Rod 26 ft.lbs + 90 deg Main Bearing 63 ft.lbs (Tighten thrust position last)

Rod

4B8170A

49.980/1.9677 50.000/1.9685

Std. .25 .50

4B8170AO/S2 .25 .50 .75

5M8174A

1.500/0.0591 .026/.0010 .052/.0020

Rod - .002" oversize OD version of 4B8170A. 49.980/1.9677 53.076/2.0896 1.650/0.0650 .026/.0010 50.000/1.9685 53.096/2.0904 (@ 0.25mm u/s) .052/.0020 Main 1,2,4,5

Std. .25 .50 .75 3 (Fl)

53.025/2.0876 53.045/2.0884

16.80/0.661

F810

8170A IH

16.80/0.661

F810

9111A IH

51.980/2.0465 52.000/2.0472

57.019/2.2448 57.037/2.2455

2.520/0.0992 .015/.0006 .045/.0018

19.09/0.752

F810

8173A U/L

51.980/2.0465 52.000/2.0472

57.019/2.2448 57.037/2.2455

2.517/0.0991 .015/.0006 .045/.0018

25.75/1.014

F810

8174A U

ENGINE

VIN CYL

144 (2.4) 170 (2.8) 170 (2.8) 200 (3.3)

L6 L6 L6 L6

Bore x Stroke 3.50 x 2.50 3.50 x 2.94 3.50 x 2.94 3.68 x 3.13

TORQUE SETTINGS Connecting Rod 19-24 ft.lbs/26-32 Nm Main Bearing 60-70 ft.lbs/81-95 Nm

Rod

6B583P

53.934/2.1234 53.945/2.1238

56.871/2.2390 56.891/2.2398

1.458/0.0574 .010/.0004 .067/.0026

20.57/0.810

F780

2150 IH

45.960/1.8095 45.985/1.8105

50.241/1.9780 50.267/1.9790

2.110/0.0832

18.42/0.725

F23

F-32-1

45.960/1.8095 45.985/1.8105

49.860/1.9630 49.886/1.9640

1.920/0.0757

18.42/0.725

F23

F-17-2

45.960/1.8095 45.985/1.8105 45.960/1.8095 45.985/1.8105

49.479/1.9480 49.505/1.9490 49.098/1.9330 49.124/1.9340

1.730/0.0682

18.42/0.725

F23

F-17-3

1.540/0.0607

18.42/0.725

F23

F-17-4

Std. 10 20 30 40

4C703S

Cam 1

Std.

350

MERCURY Type and Location

Standard Shaft Size

Max. Bearing Thickness

Housing Bore

Vertical Oil Clearance

ENGINE

VIN CYL

Bore x Stroke

155 2450cc (2.5) Duratec 182 (3.0) Duratec 182 (3.0) Duratec 182 (3.0) Duratec

L 1 2 S

3.24 x 3.13 3.24 x 3.13 3.24 x 3.13 3.24 x 3.13

V6 V6 V6 V6

Max. Overall Length

Rod - .002" oversize OD version of 6B4395A. 49.972/1.9674 53.066/2.0892 1.651/0.0650 .023/.0009 49.990/1.9681 53.086/2.0900 (@0.25mm u/s) .077/.0030

18.00/0.709

Main - High Strength Aluminum Silicon material. 62.969/2.4791 67.998/2.6771 2.502/0.0985 .020/.0008 1,2,3 62.992/2.4800 68.020/2.6779 .060/.0024

17.90/0.705

4 (Fl)

22.30/0.878

2.502/0.0985 .020/.0008 .064/.0025

2606cc (2.6) 171 (2.8) 171 (2.8)

Engine Set No. Sizes Available

4395A

6B4395A Std. .25 .50 .75

21.46/0.845

F810

9082A IH 7262A U/L

F810

7263A U/L 7263T

F100

RB4114

6B4395AO/S2 .25 .50 .75

4M7262A Std. .25 .50 .75

RB4114 Semi

VIN CYL

F810

1.95/0.077

Small End - not bored, single pieces. 21.011/0.8272 24.030/0.9461 21.013/0.8273 24.038/0.9464

ENGINE

Bearing Shell No.

TORQUE SETTINGS

18.00/0.709

67.998/2.6771 68.020/2.6779 93.550/3.6831 93.800/3.6929

Qty. Set

Connecting Rod + 90 degrees Step 3 Connecting Rod 17 ft.lbs/23 Nm Step 1 Connecting Rod 32 ft.lbs/43 Nm Step 2 Main Bearing Consult Service Manual

Rod - High Strength Aluminum Silicon material. 49.972/1.9674 53.015/2.0872 1.501/0.0591 .023/.0009 49.990/1.9681 53.035/2.0880 .077/.0030

62.969/2.4791 62.992/2.4800 71.100/2.7992 71.350/2.8090

Material Code

V6 V6 V6

Bore x Stroke 3.54 x 2.63 3.66 x 2.71 3.66 x 2.71

TORQUE SETTINGS

Connecting Rod 21-25 ft.lbs/29-34 Nm Main Bearing 65-75 ft.lbs/88-102 Nm

Rod 53.980/2.1252 54.000/2.1260

56.820/2.2370 56.840/2.2378

1.410/0.0555 .012/.0005 .078/.0030

16.48/0.649

Rod - .002" oversize OD version of 6B723P. 53.980/2.1252 56.869/2.2390 1.559/0.0614 .005/.0002 54.000/2.1260 56.891/2.2400 (@ .010" u/s) .073/.0029

16.48/0.649

Main - 171 engines 5/1/74 to 79 only. All straight main bearings. 1,2,3,4 56.980/2.2433 60.620/2.3866 1.800/0.0709 .014/.0006 57.000/2.2441 60.640/2.3873 .070/.0028

21.59/0.850

F780

1656 IH 9060 IH 1657 IH

56.980/2.2433 60.620/2.3866 57.000/2.2441 60.640/2.3873 To be discontinued when stock exhausted.

.010" u/s shaft .020" u/s shaft .030" u/s shaft .040" u/s shaft

1.800/0.0709 .014/.0006 .071/.0028

26.54/1.045

F780

56.980/2.2433 60.620/2.3866 57.000/2.2441 60.640/2.3873 Stock not available from fee warehouses.

6B723PO/S2 10 20 30 40

4M1346P Std. 10 20 30 40

4M2351P 10 20 30 40

1655 IH

* DIMENSIONAL INFORMATION FOR 4M2351P Overall Width (Nominal) Increase in Width 1.045" +0.010" 1.045" +0.010" 1.045" +0.010" 1.045" +0.010"

6B723P Std. 10 20 30 40

1.800/0.0709 .014/.0006 .071/.0028

26.80/1.055

F780

* DIMENSIONAL INFORMATION FOR 4M2352P Overall Width (Nominal) Increase in Width .020" u/s shaft 1.055" +0.020" .030" u/s shaft 1.055" +0.020"

351

1659 IH

4M2352P 20 30

MERCURY Engine Set No. Sizes Available

Type and Location

Standard Shaft Size

Housing Bore

Max. Bearing Thickness

Vertical Oil Clearance

Max. Overall Length

Material Code

Qty. Set

Bearing Shell No.

F780

1657 IH

26.29/1.035

F780

1658 IH

63.855/2.5140 80.493/3.1690 2.35/0.093 (Nominal) (Nominal) Note: Thrust set includes four pieces, use on No. 3 position. Required with 4M1346P main set.

F250

2167T U

14 (Contâ&#x20AC;&#x2122;d.) Main - for engines from 1972 to 5/1/74. All engines with flanged main bearings. 56.980/2.2433 60.620/2.3866 1.800/0.0709 .014/.0006 21.59/0.850 1,2,4 Std. 10 20 30 40 57.000/2.2441 60.640/2.3873 .071/.0028

4M860P

3 (Fl)

56.980/2.2433 60.620/2.3866 1.800/0.0709 .014/.0006 57.000/2.2441 60.640/2.3873 .071/.0028 Overflange length remains constant for standard and undersizes.

2T325S Std.

4C654S Std.

Thrust 3

Cam - 1972-79 engines only. 1 41.897/1.6495 45.030/1.7728 41.923/1.6505 45.060/1.7740 2 41.516/1.6345 44.653/1.7580 41.542/1.6355 44.679/1.7590 3 41.135/1.6195 44.272/1.7430 41.160/1.6205 44.298/1.7440

1.530/0.0604

19.80/0.780

F23

F-31-1

1.530/0.0604

17.91/0.705

F23

F-31-2

1.530/0.0604

17.91/0.705

F23

F-31-3

1.530/0.0604

15.25/0.600

F23

F-31-4

40.755/1.6045 40.780/1.6055

43.890/1.7280 43.917/1.7290

ENGINE

VIN CYL

Bore x Stroke

182 (3.0) OHV (Vulcan)

3.50 x 3.15

TORQUE SETTINGS Connecting Rod 23-29 ft.lbs/31-39 Nm Main Bearing 63-69 ft.lbs/85-93 Nm

Rod

6B1385P

53.983/2.1253 54.003/2.1261

57.150/2.2500 57.170/2.2508

1.567/0.0617 .013/.0005 .079/.0031

19.25/0.758

F780

5230 IH

63.983/2.5190 64.003/2.5198 63.983/2.5190 64.003/2.5198

68.885/2.7120 68.905/2.7128 68.885/2.7120 68.903/2.7127

2.443/0.0962 .025/.0010 .058/.0023 2.435/0.0959 .013/.0005 .076/.0030

18.69/0.736

F780

25.65/1.010

F780

5232 U/L 5233 U/L

63.983/2.5190 68.885/2.7120 2.435/0.0959 .025/.0010 64.003/2.5198 68.903/2.7127 .076/.0030 Overflange length remains constant for standard and undersizes.

27.00/1.063

F780

Std. .25 .50 .75 1.0

4M1702P

Main 1,2

Std. .25 .50 .75 3 (Fl) 4

4M5219P 25 50 75

5234 U/L

Main - optional set to 4M1702P with +0.004" overflange length increase for undersizes. *See below for dimensional information. 1,2 63.983/2.5190 68.885/2.7120 2.443/0.0962 .025/.0010 18.69/0.736 F780 4 5232 64.003/2.5198 68.905/2.7128 .058/.0023 U/L 3 (Fl) 63.983/2.5190 68.885/2.7120 2.435/0.0959 .013/.0005 25.75/1.014 F780 2 5219 64.003/2.5198 68.903/2.7127 .076/.0030 U/L 4 63.983/2.5190 68.885/2.7120 2.435/0.0959 .025/.0010 27.00/1.063 F780 2 5234 64.003/2.5198 68.903/2.7127 .076/.0030 U/L To be discontinued when stock exhausted. * DIMENSIONAL INFORMATION FOR 4M5219P Overall Width (Nominal) Increase in Width 0.25 mm u/s shaft 1.014" +0.004" 0.50 mm u/s shaft 1.014" +0.004" 0.75 mm u/s shaft 1.014" +0.004"

4C048AS Std.

Cam - has modified #4 position bearing. 1 51.000/2.0079 54.676/2.1526 1.830/0.0720 51.020/2.0087 54.727/2.1546

24.38/0.960

F23

F-48-1

2,3

51.000/2.0079 51.020/2.0087

54.176/2.1329 54.226/2.1349

1.570/0.0618

13.77/0.542

F23

F-48-2

51.000/2.0079 51.020/2.0087

54.676/2.1526 54.727/2.1546

1.830/0.0720

13.77/0.542

F23

F-48-4A

352

MERCURY Type and Location

Standard Shaft Size

Max. Bearing Thickness

Housing Bore

Vertical Oil Clearance

Max. Overall Length

Material Code

Qty. Set

Bearing Shell No.

Engine Set No. Sizes Available

(Contâ&#x20AC;&#x2122;d.) Cam - use 4C048AS when stock depleted. 51.000/2.0079 54.676/2.1526 1.830/0.0719 1 51.020/2.0086 54.727/2.1546

24.38/0.960

2,3

51.000/2.0079 51.020/2.0086

54.176/2.1329 54.226/2.1349

1.570/0.0620

13.77/0.542

F23

F-48-2

51.000/2.0079 51.020/2.0086

54.676/2.1526 54.727/2.1546

1.830/0.0719

13.77/0.542

F23

F-48-4

F-48-1

4C048S S/C by 4C048AS

ENGINE

VIN CYL

Bore x Stroke

182 (3.0) SOHC (Nissan VG30E) 182 (3.0) SOHC (Nissan VG30E) 3275cc (3.3) SOHC (Nissan VG33E) 3275cc (3.3) SOHC (Nissan VG33E)

1 W

V6 V6

87mm x 83mm 87mm x 83mm

92mm x 83mm

F23

TORQUE SETTINGS

Connecting Rod 33-40 ft.lbs/45-54 Nm Main Bearing 67-74 ft.lbs/91-100 Nm

Rod 49.961/1.9670 49.974/1.9675

53.000/2.0866 53.011/2.0870

1.506/0.0593 .014/.0006 .064/.0025

Main 1

ENGINE

VIN CYL

200 (3.3) 7 Main 200 (3.3) 7 Main 200 (3.3) 7 Main 200 (3.3) 7 Main

B T X

L6 L6 L6 L6

.028/.0011 .099/.0039 .028/.0011 .099/.0039 .028/.0011 .099/.0039

Bore x Stroke 3.68 x 3.13 3.68 x 3.13 3.68 x 3.13 3.68 x 3.13

17.09/0.673

22.50/0.886

F780

19.00/0.748

F780

28.85/1.136

F780

2390 IH 2777 U/L 2778 U/L 2779 U/L

6B2390 Std. .25 .50 .75 1.0

4M2777 Std. .25 .50 .75 1.0

TORQUE SETTINGS

Connecting Rod 19-24 ft.lbs/26-32 Nm Main Bearing 60-70 ft.lbs/81-95 Nm

Rod 53.934/2.1234 53.945/2.1238

56.871/2.2390 56.891/2.2398

1.458/0.0574 .010/.0004 .067/.0026

Main - half groove for 75-83 engines only. 57.109/2.2484 60.991/2.4012 1.928/0.0759 .020/.0008 1-4,6,7 57.119/2.2488 61.011/2.4020 .057/.0022 1-4,6,7 57.109/2.2484 60.991/2.4012 1.928/0.0759 .020/.0008 57.119/2.2488 61.011/2.4020 .057/.0022

20.57/0.810

25.90/1.020

F780

2150 IH 2126 U 5224 L

25.90/1.020

F780

1.928/0.0759 .010/.0004 .077/.0030

32.28/1.271

F780

2127 U

5 (Fl)

57.104/2.2482 60.991/2.4012 1.928/0.0759 .010/.0004 57.125/2.2490 61.011/2.4020 .077/.0030 Overflange length remains constant for standard and undersizes.

32.28/1.271

F780

2125 L

Main - full groove for 65-75 engines only. 57.109/2.2484 60.995/2.4014 1.928/0.0759 .020/.0008 1-4,6,7 57.119/2.2488 61.006/2.4018 .057/.0022

25.90/1.020

F780

2126 IH

5 (Fl)

32.28/1.271

5 (Fl)

57.104/2.2482 57.124/2.2490

60.991/2.4012 61.011/2.4020

57.109/2.2484 60.995/2.4014 1.928/0.0759 .020/.0008 57.119/2.2488 61.006/2.4018 .057/.0022 Overflange length remains constant for standard and undersizes.

353

F780

2127 IH

6B583P Std. 10 20 30 40

7M1389P Std. 10 20 30 40

7M771P Std. 10 20 30 40

MERCURY Engine Set No. Sizes Available

Type and Location

Max. Overall Length

Material Code

Qty. Set

Bearing Shell No.

2.110/0.0832

18.42/0.725

F23

F-32-1

49.860/1.9630 49.886/1.9640

1.920/0.0757

18.42/0.725

F23

F-17-2

49.479/1.9480 49.505/1.9490 49.098/1.9330 49.124/1.9340

1.730/0.0682

18.42/0.725

F23

F-17-3

1.540/0.0607

18.42/0.725

F23

F-17-4

Standard Shaft Size

Housing Bore

45.960/1.8095 45.985/1.8105

50.241/1.9780 50.267/1.9790

45.960/1.8095 45.985/1.8105

45.960/1.8095 45.985/1.8105 45.960/1.8095 45.985/1.8105

Max. Bearing Thickness

Vertical Oil Clearance

17 (Contâ&#x20AC;&#x2122;d.) 4C703S

Cam 1

Std.

ENGINE

VIN CYL

221 (3.6) 255 (4.2) 260 (4.3) 289 (4.7) 289 (4.7) 302 (5.0) 302 (5.0) 302 (5.0) 302 (5.0) 302 (5.0) 302 (5.0)

8B634A Std. 01 10 20 30 40

8B634AO/S2 10 20 30 40

D C F G J M P T

V8 V8 V8 V8 V8 V8 V8 V8 V8 V8 V8

Bore x Stroke 3.50 x 2.87 3.68 x 3.00 3.80 x 2.87 4.00 x 2.87 4.00 x 2.87 4.00 x 3.00 4.00 x 3.00 4.00 x 3.00 4.00 x 3.00 4.00 x 3.00 4.00 x 3.00

TORQUE SETTINGS Connecting Rod 19-24 ft.lbs/26-32 Nm Main Bearing 60-70 ft.lbs/81-95 Nm

Rod - High Strength Aluminum Silicon material. 53.919/2.1228 56.871/2.2390 1.458/0.0574 .016/.0006 53.939/2.1236 56.891/2.2398 .081/.0032

18.44/0.726

F810

2131A

Rod - .002" oversize OD version of 8B634A. 53.919/2.1228 56.871/2.2390 1.610/0.0634 .016/.0006 53.939/2.1236 56.891/2.2398 (@ .010" u/s) .081/.0032

18.44/0.726

F810

9030A IH

18.44/0.726

F780

2131 IH

18.44/0.726

F780

9030 IH

Rod

8B634P

53.919/2.1228 53.939/2.1236

Std. 01 10 20 30 40

8B634PO/S2 10 20 30 40

5M1666P 10 20 30 40

56.871/2.2390 56.891/2.2398

Rod - .002" oversize OD version of 8B634P. 53.919/2.1228 56.922/2.2410 1.610/0.0634 .017/.0007 53.939/2.1236 56.942/2.2418 (@ .010" u/s) .083/.0033

57.104/2.2482 62.006/2.4412 57.125/2.2490 62.027/2.4420 Stock not available from fee warehouses.

.010" u/s shaft .020" u/s shaft .030" u/s shaft .040" u/s shaft

5M1746P 10 20 30 40

1.458/0.0574 .016/.0006 .081/.0032

2.438/0.0960 .005/.0002 .073/.0029

29.28/1.153

F780

2145 U/L

* DIMENSIONAL INFORMATION FOR 5M1666P Overall Width (Nominal) Increase in Width 1.153" +0.020" 1.153" +0.020" 1.153" +0.020" 1.153" +.0.020"

57.104/2.2482 62.006/2.4412 57.125/2.2490 62.027/2.4420 Stock not available from fee warehouses.

.010" u/s shaft .020" u/s shaft .030" u/s shaft .040" u/s shaft

2.438/0.0960 .005/.0002 .073/.0029

29.03/1.143

F780

* DIMENSIONAL INFORMATION FOR 5M1746P Overall Width (Nominal) Increase in Width 1.143" +0.010" 1.143" +0.010" 1.143" +0.010" 1.143" +0.010"

354

2139 U/L

MERCURY Type and Location

Standard Shaft Size

Max. Bearing Thickness

Housing Bore

Vertical Oil Clearance

Max. Overall Length

Material Code

Qty. Set

Bearing Shell No.

Engine Set No. Sizes Available

(Contâ&#x20AC;&#x2122;d.) Main - optional set to 5M590P with +0.004" overflange length increase for undersizes. *See below for dimensional information. 57.104/2.2482 62.006/2.4412 2.563/0.1009 .005/.0002 22.48/0.885 F780 8 2132 1,2,4,5 57.125/2.2490 62.027/2.4420 (@ .010" u/s) .073/.0029 U/L 3 (Fl)

57.104/2.2482 62.006/2.4412 57.125/2.2490 62.027/2.4420 To be discontinued when stock exhausted.

2.563/0.1009 .005/.0002 (@ .010" u/s) .073/.0029

28.88/1.137

F780

5M2144P 10 20 30

2144 U/L

* DIMENSIONAL INFORMATION FOR 5M2144P Overall Width (Nominal) Increase in Width +.010" u/s shaft 1.137" +0.004" +.020" u/s shaft 1.137" +0.004" +.030" u/s shaft 1.137" +0.004" Main - High Strength Aluminum Silicon material. 1,2,4,5 57.104/2.2482 62.006/2.4412 2.438/0.0960 57.125/2.2490 62.027/2.4420 3 (Fl) 57.104/2.2482 62.006/2.4412 2.438/0.0960 57.125/2.2490 62.027/2.4420 Main - half groove. 1,2,4,5 57.104/2.2482 62.006/2.4412 2.438/0.0960 57.125/2.2490 62.027/2.4420 3 (Fl) 57.104/2.2482 62.006/2.4412 2.438/0.0960 57.125/2.2490 62.027/2.4420 Overflange length remains constant for standard and undersizes. Cam 1

.005/.0002 .073/.0029 .005/.0002 .073/.0029

22.48/0.885

F810

28.78/1.133

F810

.005/.0002 .073/.0029 .005/.0002 .073/.0029

22.48/0.885

F780

2132A U/L 2133A U/L 2132 U/L 2133 U/L

28.78/1.133

F780

1.530/0.0602

16.89/0.665

F23

F-18-1

1.530/0.0602

16.89/0.665

F23

F-18-2

1.530/0.0602

16.89/0.665

F23

F-18-3

52.845/2.0805 52.870/2.0815 52.464/2.0655 52.490/2.0665 52.083/2.0505 52.108/2.0515

55.982/2.2040 56.007/2.2050 55.600/2.1890 55.626/2.1900 55.220/2.1740 55.245/2.1750

51.702/2.0355 51.727/2.0365

54.839/2.1590 54.864/2.1600

1.530/0.0602

16.89/0.665

F23

F-18-4

51.321/2.0205 51.346/2.0215

54.458/2.1440 54.483/2.1450

1.530/0.0602

16.89/0.665

F23

F-18-5

2 3

5M590P Std. 01 10 20 30 40

5C510S Std.

ENGINE

VIN CYL

Bore x Stroke

232 (3.8) OHV 232 (3.8) OHV 232 (3.8) OHV 232 (3.8) OHV Supercharged 232 (3.8) OHV Supercharged

3 4 C C R

97mm x 86mm 97mm x 86mm 97mm x 86mm 97mm x 86mm 97mm x 86mm

Rod - for engines 1982-1995 only. 58.674/2.3100 61.636/2.4266 58.699/2.3110 61.656/2.4274

5M590A Std. 01 10 20 30 40

V6 V6 V6 V6 V6

1.462/0.0576 .013/.0005 .084/.0033

Rod - .002" oversize OD version of 6B1283P. 58.674/2.3100 61.687/2.4286 1.614/0.0635 .014/.0006 58.699/2.3110 61.707/2.4294 (@ 0.25 mm u/s) .085/.0033

TORQUE SETTINGS Connecting Rod 31-36 ft.lbs/42-48 Nm Main Bearing 65-81 ft.lbs/88-110 Nm

17.06/0.672

F780

Rod - for engines 1996-97 only - High Strength Aluminum Silicon material. 58.682/2.3103 61.630/2.4264 1.460/0.0575 .013/.0005 19.90/0.783 58.702/2.3111 61.648/2.4271 .065/.0026

F810

Rod - .002" oversize OD version of 6B4500A. 58.682/2.3103 61.630/2.4264 1.587/0.0625 .013/.0005 58.702/2.3111 61.648/2.4271 (@ .25 mm u/s) .065/.0026

F810

Rod - for engines 1996-97 only. 58.682/2.3103 61.630/2.4264 1.460/0.0575 .013/.0005 58.702/2.3111 61.648/2.4271 .065/.0026 To be superceded by 6B4500A when stock exhausted.

355

19.90/0.783

F780

5200 IH 9055 IH 4500A IH 9081A IH 4500 IH

6B1283P Std. .25 .50 .75 1.0

6B1283PO/S2 .25 .50 .75

6B4500A Std. .25 .50 .75

6B4500AO/S2 .25 .50 .75

6B4500P Std. .25 .50 .75

MERCURY Engine Set No. Sizes Available

Type and Location

Max. Overall Length

Material Code

Qty. Set

Bearing Shell No.

19.90/0.783

F780

9081 IH

21.66/0.853

F780

29.62/1.166

F780

5202 U/L 5203 U/L

Main - for supercharged engines only - High Strength Aluminum Silicon material. 63.983/2.5190 68.890/2.7122 2.451/0.0965 .013/.0005 21.79/0.858 1,2 64.003/2.5198 68.910/2.7130 .058/.0023

F810

7294A L

1,2

7294WA U 7295A U/L

Standard Shaft Size

Housing Bore

Max. Bearing Thickness

Vertical Oil Clearance

19 (Contâ&#x20AC;&#x2122;d.) 6B4500PO/S2 Std. .25 .50 .75

Rod - .002" oversize OD version of 6B4500P. 58.682/2.3103 61.681/2.4284 1.587/0.0625 .008/.0003 58.702/2.3111 61.698/2.4291 (@ .25 mm u/s) .072/.0028 To be superceded by 6B4500AO/S2 when stock exhausted.

Main - for engines 1982-1988 only. 1,3,4 63.978/2.5188 68.890/2.7122 2.437/0.0959 64.003/2.5198 68.910/2.7130 Std. .25 .50 .75 1.0 2 (Fl) 63.978/2.5188 68.890/2.7122 2.437/0.0959 64.003/2.5198 68.910/2.7130 To be superceded by 4M7295A when stock exhausted.

4M1561P

4M1782A Std. .25 .50 .75

3 (Fl) 4

.013/.0005 .084/.0033 .013/.0005 .084/.0033

63.983/2.5190 64.003/2.5198 63.983/2.5190 64.003/2.5198

68.890/2.7122 68.910/2.7130 68.890/2.7122 68.910/2.7130

2.451/0.0965 .013/.0005 .058/.0023 2.438/0.0960 .013/.0005 .058/.0023

23.50/0.925

F810

29.62/1.166

F810

63.744/2.5096 63.764/2.5104

68.890/2.7122 68.910/2.7130

2.548/0.1003 .025/.0010 .071/.0028

21.79/0.858

F810

5229A U/L 5238 U/L 5239 U/L 5229 U/L

Main - for supercharged engines only. 1,2 63.983/2.5190 68.890/2.7122 2.451/0.0965 Std. .25 .50 .75 1.0 64.003/2.5198 68.910/2.7130 3 (Fl) 63.983/2.5190 68.890/2.7122 2.451/0.0965 64.003/2.5198 68.910/2.7130 4 63.744/2.5096 68.890/2.7122 2.548/0.1003 63.764/2.5104 68.910/2.7130 To be superceded by 4M1782A when stock exhausted.

.013/.0005 .058/.0023 .013/.0005 .058/.0023 .025/.0010 .071/.0028

21.79/0.858

F780

29.62/1.166

F780

21.79/0.858

F780

Main - Normally aspirated engines 1989-97 only. 1,2,4 63.983/2.5190 68.890/2.7122 2.451/0.0965 Std. .25 .50 .75 1.0 64.003/2.5198 68.910/2.7130 3 (Fl) 63.983/2.5190 68.890/2.7122 2.451/0.0965 64.003/2.5198 68.910/2.7130 To be superceded by 4M7295A when stock exhausted.

.013/.0005 .058/.0023 .013/.0005 .058/.0023

21.79/0.858

F780

29.62/1.166

F780

4M1782P

4M1812P

4M5205P .25 .50 .75

5238 U/L 5239 U/L

Main - engines 1982-88 - Optional set to 4M1561P with +0.004" overflange length increase. *See dimensional infromation below. 63.978/2.5188 68.890/2.7122 2.437/0.0959 .013/.0005 21.66/0.853 F780 6 5202 1,3,4 64.003/2.5198 68.910/2.7130 .084/.0033 U/L 3 (Fl) 63.978/2.5188 68.890/2.7122 2.437/0.0959 .013/.0005 29.72/1.170 F780 2 5205 64.003/2.5198 68.910/2.7130 .084/.0033 U/L To be discontinued when stock exhausted. * DIMENSIONAL INFORMATION FOR 4M5205P Overall Width (Nominal) Increase in Width 0.25 mm u/s shaft 1.170" +0.004" 0.50 mm u/s shaft 1.170" +0.004" 0.75 mm u/s shaft 1.170" +0.004"

4M5208P .25 .50 .75

Main - engines 1982-88 - Optional set to 4M1561P with +0.010" overflange length increase. *See dimensional infromation below. 63.978/2.5188 68.890/2.7122 2.437/0.0959 .013/.0005 21.66/0.853 F780 6 5202 1,3,4 64.003/2.5198 68.910/2.7130 .084/.0033 U/L 3 (Fl)

63.978/2.5188 68.890/2.7122 64.003/2.5198 68.910/2.7130 Stock not available from fee warehouses.

2.437/0.0959 .013/.0005 .058/.0023

29.87/1.176

F780

* DIMENSIONAL INFORMATION FOR 4M5208P Overall Width (Nominal) Increase in Width 0.25 mm u/s shaft 1.176" +0.010" 0.50 mm u/s shaft 1.176" +0.010" 0.75 mm u/s shaft 1.176" +0.010"

356

5208 U/L

MERCURY Type and Location

Standard Shaft Size

Max. Bearing Thickness

Housing Bore

Vertical Oil Clearance

Max. Overall Length

Material Code

Qty. Set

Bearing Shell No.

Engine Set No. Sizes Available

(Contâ&#x20AC;&#x2122;d.) Main - for engines 1982 on (excl. supercharged) - High Strength Aluminum Silicon material. 63.983/2.5190 68.890/2.7122 2.451/0.0965 .013/.0005 23.50/0.925 F810 1,2,4 64.003/2.5198 68.910/2.7130 .058/.0023

1,2,4

63.983/2.5190 64.003/2.5198

68.890/2.7122 68.910/2.7130

2.451/0.0965 .013/.0005 .058/.0023

21.79/0.858

F810

7294A L

3 (Fl)

63.983/2.5190 64.003/2.5198

68.890/2.7122 68.910/2.7130

2.438/0.0960 .013/.0005 .058/.0023

29.62/1.166

F810

7295A U/L

Cam - 1982-87 engines. 52.083/2.0505 1,4 52.108/2.0515

55.664/2.1915 55.690/2.1925

1.763/0.0694

16.26/0.640

F23

F-45-1

52.083/2.0505 52.108/2.0515

55.283/2.1765 55.308/2.1775

1.570/0.0619

14.22/0.560

F23

F-45-2

Cam - 1988-97 engines. 1,4 52.083/2.0505 52.108/2.0515 2,3 52.083/2.0505 52.108/2.0515

55.664/2.1915 55.687/2.1924 55.664/2.1915 55.687/2.1924

1.763/0.0694 .025/.0010 .076/.0030 1.570/0.0619 .025/.0010 .076/.0030

16.26/0.640

F23

F-52-1

14.22/0.560

F23

F-51-2

Balance Shaft - 1988-97 engines. 52.083/2.0505 55.664/2.1915 Front & 52.108/2.0515 55.690/2.1925 Rear

1.763/0.0694 .076/.0030

16.26/0.640

F23

AGB-51-1

2,3

7294WA U

4M7295A Std. .25 .50 .75

4C1197S Std.

4C1447S Std.

2BS1445S Std.

ENGINE

VIN CYL

Bore x Stroke

245 (4.0) SOHC 245 (4.0) SOHC

E K

3.95 x 3.32 3.95 x 3.32

V6 V6

TORQUE SETTINGS

Connecting Rod 18-24 ft.lbs/25-32 Nm Main Bearing 66-77 ft.lbs/89-104 Nm

Rod 53.980/2.1252 54.000/2.1260

56.820/2.2370 56.840/2.2378

1.410/0.0555 .012/.0005 .078/.0030

16.48/0.649

Rod - .002" oversize OD version of 6B723P. 53.980/2.1252 56.869/2.2390 1.559/0.0614 .005/.0002 54.000/2.1260 56.891/2.2400 (@ .010" u/s) .073/.0029

16.48/0.649

Main 1,2,4 Upper

21.59/0.850

56.980/2.2433 57.000/2.2441

60.620/2.3866 60.640/2.3874

1.806/0.0711 .015/.0006 .081/.0032

1,2,4 Lower 3 (Fl)

.015/.0006 .081/.0032 .015/.0006 .081/.0032

F780

21.59/0.850

F780

26.29/1.035

F780

1656 IH 9060 IH 1657 U

6B723P Std. 10 20 30 40

6B723PO/S2 10 20 30 40

4M2006P Std. 10 20 30

1663 L 1658 IH

AR Auxiliary Front

47.046/1.8522

1.549/0.0610

29.00/1.142

F23

FG-53-1

Rear

45.903/1.8072

1.549/0.0610

22.98/0.905

F23

FG-53-2

2C6002S Std.

ENGINE

VIN CYL

Bore x Stroke

250 (4.1) 250 (4.1)

C L

3.68 x 3.91 3.68 x 3.91

L6 L6

TORQUE SETTINGS

Connecting Rod 21-26 ft.lbs/28-35 Nm Main Bearing 60-70 ft.lbs./81-95 Nm

Rod 53.934/2.1234 53.945/2.1238

56.871/2.2390 56.891/2.2398

1.458/0.0574 .010/.0004 .067/.0026

357

20.57/0.810

F780

2150 IH

6B583P Std. 10 20 30 40

MERCURY Engine Set No. Sizes Available

Type and Location

Standard Shaft Size

Housing Bore

Max. Bearing Thickness

Vertical Oil Clearance

Max. Overall Length

Material Code

Qty. Set

Bearing Shell No.

21 (Contâ&#x20AC;&#x2122;d.)

7M2193P 10 20 30 40

60.914/2.3982 65.791/2.5902 60.935/2.3990 65.811/2.5910 To be discontinued when stock exhausted.

.010" u/s shaft .020" u/s shaft .030" u/s shaft .040" u/s shaft

7M979P

Main 1-4,6,7

65.791/2.5902 65.811/2.5910

2185 U/L

60.914/2.3982 65.791/2.5902 2.428/0.0956 .025/.0010 60.935/2.3990 65.811/2.5910 .066/.0026 Overflange length remains constant for standard and undersizes.

30.35/1.195

F780

2187 U/L

Cam 1

45.960/1.8095 45.985/1.8105

50.241/1.9780 50.267/1.9790

2.110/0.0832

18.42/0.725

F23

F-32-1

45.960/1.8095 45.985/1.8105

49.860/1.9630 49.886/1.9640

1.920/0.0757

18.42/0.725

F23

F-17-2

45.960/1.8095 45.985/1.8105

49.479/1.9480 49.505/1.9490

1.730/0.0682

18.42/0.725

F23

F-17-3

45.960/1.8095 45.985/1.8105

49.098/1.9330 49.124/1.9340

1.540/0.0607

18.42/0.725

F23

F-17-4

VIN CYL

Bore x Stroke

256 (4.2) OHV

3.81 x 3.74

Std. .25 .50 .75

6B4500AO/S2 .25 .50 .75

4M7295A Std. .25 .50 .75

4C1447S

Connecting Rod 15-18 ft.lbs/20-24 Nm Step 1 Connecting Rod 29-33 ft.lbs/39-45 Nm Step 2 Connecting Rod 90-120 degree turn Step 3 Main Bearing 37 ft.lbs + 120 deg Vans Main Bearing 65-81 ft.lbs Trucks

19.90/0.783

F810

4500A IH

Rod - .002" oversize OD version of 6B4500A. 58.682/2.3103 61.630/2.4264 1.587/0.0625 .013/.0005 58.702/2.3111 61.648/2.4271 (@ .25 mm u/s) .065/.0026

19.90/0.783

F810

9081A IH

23.50/0.925

F810

21.79/0.858

F810

29.62/1.166

F810

7294WA U 7294A L 7295A U/L

.013/.0005 .058/.0023 .013/.0005 .058/.0023 .013/.0005 .058/.0023

52.083/2.0505 52.108/2.0515

55.664/2.1915 55.687/2.1924

1.763/0.0694 .025/.0010 .076/.0030

16.26/0.640

F23

F-52-1

52.083/2.0505 52.108/2.0515

55.664/2.1915 55.687/2.1924

1.570/0.0619 .025/.0010 .076/.0030

14.22/0.560

F23

F-51-2

Balance Shaft Front & 52.083/2.0505 52.108/2.0515 Rear

55.664/2.1915 55.690/2.1925

1.763/0.0694 .076/.0030

16.26/0.640

F23

AGB-51-1

2,3

Std.

TORQUE SETTINGS

Rod - High Strength Aluminum Silicon material. 58.682/2.3103 61.630/2.4264 1.460/0.0575 .013/.0005 58.702/2.3111 61.648/2.4271 .065/.0026

Std.

2BS1445S

2193 U/L

F780

ENGINE

6B4500A

24.13/0.950

Std.

F780

* DIMENSIONAL INFORMATION FOR 7M2193P Overall Width (Nominal) Increase in Width 1.205" +0.010" 1.205" +0.010" 1.205" +0.010" 1.205" +0.010"

5 (Fl)

4C703S

30.61/1.205

2.428/0.0956 .025/.0010 .066/.0026

Std. 01 10 20 30 40

60.914/2.3982 60.935/2.3990

2.428/0.0956 .025/.0010 .066/.0026

358

MERCURY Type and Location

Standard Shaft Size

Max. Bearing Thickness

Housing Bore

Vertical Oil Clearance

Max. Overall Length

ENGINE

VIN CYL

Bore x Stroke

281 (4.6) SOHC 281 (4.6) SOHC

6 W

90.2mm x 90mm 90.2mm x 90mm

V8 V8

Material Code

Qty. Set

Bearing Shell No.

Engine Set No. Sizes Available

TORQUE SETTINGS

Connecting Rod 23 ft.lbs/31 Nm + 90 deg Main Bearing 24 ft.lbs/33 Nm + 90 deg

Rod - High Strength Aluminum Silicon material. 52.984/2.0860 56.866/2.2388 1.928/0.0759 .012/.0005 53.002/2.0867 56.886/2.2396 .063/.0025

20.96/0.825

Rod - .002" oversize OD version of 8B1442A. 52.984/2.0860 56.916/2.2408 2.075/0.0817 .013/.0005 53.002/2.0867 56.937/2.2416 (@ .25 mm u/s) .078/.0031

20.95/0.825

F810

5636A IH 9080A IH

8B1442A Std. .25 .50 .75 1.0

8B1442AO/S2 .25 .50 .75 1.0

Rod 52.984/2.0860 56.866/2.2388 1.928/0.0759 .012/.0005 53.002/2.0867 56.886/2.2396 .063/.0025 To be superceded by 8B1442A when stock exhausted. Rod - .002" oversize OD version of 8B1442P. 52.984/2.0860 56.916/2.2408 2.075/0.0817 .013/.0005 53.002/2.0867 56.937/2.2416 (@ .25 mm u/s) .078/.0031 To be superceded by 8B1442AO/S2 when stock exhausted.

20.96/0.825

20.95/0.825

Main - for engines 1993 on (Excl. DOHC). (Upper flange bearing has no tang) 1-4 67.483/2.6568 72.403/2.8505 2.443/0.0962 .014/.0006 18.25/0.719 67.503/2.6576 72.420/2.8512 .077/.0030 1-5 67.483/2.6568 72.403/2.8505 2.443/0.0962 .014/.0006 19.12/0.753 67.503/2.6576 72.420/2.8512 .077/.0030 5 (Fl) 67.483/2.6568 72.403/2.8505 2.443/0.0962 .014/.0006 22.61/0.890 67.503/2.6576 72.420/2.8512 .077/.0030 5 (TW) 76.000/2.9921 91.500/3.6024 2.36/0.093 76.250/3.0020 91.750/3.6122 (I.D.) (O.D.) Overflange length remains constant for standard and undersizes.

F780

F817

5636 IH

9080 IH

5638 L 5638W U 5639 L 5639T U

.014/.0006 .077/.0030 .014/.0006 .077/.0030

19.12/0.753

F780

22.86/0.900

F780

8B1442P Std. .25 .50 .75 1.0

8B1442PO/S2 .25 .50 .75 1.0

5M2007P Std. .25 .50 .75 1.0

5M5649P 1.0

5638W U 5649 U/L

* DIMENSIONAL INFORMATION FOR 5M5649P Overall Width (Nominal) Increase in Width 1.00mm u/s shaft 0.900" + 0.010" Main - for 1992 engines. (Upper flange bearing has no tang) 1-4 67.483/2.6568 72.403/2.8505 2.443/0.0962 .014/.0006 67.503/2.6576 72.420/2.8512 .077/.0030

18.25/0.719

1-4

.014/.0006 .077/.0030 .014/.0006 .077/.0030

19.12/0.753

F780

22.61/0.890

F780

2.443/0.0962 .008/.0003 .071/.0028

19.26/0.758

F810

67.483/2.6568 72.403/2.8505 2.443/0.0962 67.503/2.6576 72.420/2.8512 5 (Fl) 67.483/2.6568 72.403/2.8505 2.443/0.0962 67.503/2.6576 72.420/2.8512 Overflange length remains constant for standard and undersizes. Main - for VIN 6 engines only. 1 67.480/2.6567 72.400/2.8504 67.506/2.6577 72.421/2.8512 2,3,4,5

67.480/2.6567 72.400/2.8504 2.443/0.0962 67.506/2.6577 72.421/2.8512 1-5 67.480/2.6567 72.400/2.8504 2.443/0.0962 67.506/2.6577 72.421/2.8512 5 76.750/3.0216 96.750/3.8090 (ID) (OD) 77.000/3.0315 97.000/3.8189 Overflange length remains constant for standard and undersizes.

.008/.0003 .071/.0028 .008/.0003 .071/.0028

359

F780

20.06/0.790

F810

20.06/0.790

F810

2.92/0.115

F810

5638 L

5M7141P Std. .25 .50 .75 1.0

5638W U 5639 U/L

7293A U 7296A U 7296A L 7296T U/L

5M7296A Std. .25 .50 .75 1.0

MERCURY Engine Set No. Sizes Available

Type and Location

Standard Shaft Size

Housing Bore

Max. Bearing Thickness

Vertical Oil Clearance

Max. Overall Length

Material Code

Qty. Set

Bearing Shell No.

23 (Contâ&#x20AC;&#x2122;d.) 6C1100A Std. .25

Cam Tower 26.937/1.0605 1-6 26.962/1.0615 1-6

RB4113 Semi

26.937/1.0605 26.962/1.0615

29.119/1.1464 29.144/1.1474

1.083/0.0426 .013/.0005 .038/.0015

14.70/0.579

F810

5194A L

29.190/1.1492 29.144/1.1474

1.083/0.0426 .013/.0005 .038/.0015

14.70/0.579

F810

5195A U

23.75/0.935

F100

RB4113

Small End - single pieces, not bored. 21.994/0.8659 24.016/0.9455 21.999/0.8661 24.041/0.9465

ENGINE

VIN CYL

Bore x Stroke

351 (5.8) Windsor 351 (5.8) Windsor 351 (5.8) Windsor 351 (5.8) Windsor

G H M Q

4.00 x 3.50 4.00 x 3.50 4.00 x 3.50 4.00 x 3.50

8B831A Std. 10 20 30 40

8B831AO/S2 10 20 30 40

V8 V8 V8 V8

TORQUE SETTINGS Connecting Rod 40-45 ft.lbs/54-61 Nm Main Bearing 95-105 ft.lbs/129-142 Nm

Rod - High Strength Aluminum Silicon material. 58.682/2.3103 61.633/2.4265 1.465/0.0577 .010/.0004 58.702/2.3111 61.653/2.4273 .066/.0026

18.18/0.716

F810

2176A IH

Rod - .002" oversize OD version of 8B831A. 58.682/2.3103 61.684/2.4285 1.617/0.0637 .010/.0004 58.702/2.3111 61.704/2.4293 (@ .010" u/s) .066/.0026

18.18/0.716

F810

9031A IH

18.18/0.716

F780

2176 IH

18.18/0.716

F780

9031 IH

F810

2177A U

21.26/0.837

F810

28.78/1.133

F810

28.78/1.133

F810

5207A L 2178A U 5209A L

21.26/0.837

F780

21.26/0.837

F780

28.78/1.133

F780

28.78/1.133

F780

Rod

8B831P Std. 01 10 20 30 40

8B831PO/S2 10 20 30 40

58.682/2.3103 61.633/2.4265 1.465/0.0577 .010/.0004 58.702/2.3111 61.653/2.4273 .066/.0026 To be superceded by 8B831A when stock exhausted. Rod - .002" oversize OD version of 8B831P. 58.682/2.3103 61.684/2.4285 1.617/0.0637 .002/.0001 58.702/2.3111 61.704/2.4293 (@ .010" u/s) .068/.0027 To be superceded by 8B831AO/S2 when stock exhausted.

Main - engines 1977-1989 - half groove. High Strength Aluminum Silicon material. 76.185/2.9994 81.082/3.1922 2.433/0.0958 .011/.0004 21.26/0.837 1,2,4,5 Std. 10 20 30 40 76.205/3.0002 81.102/3.1930 .076/.0030

5M1432A

1,2,4,5 3 (Fl) 3 (Fl)

76.185/2.9994 76.205/3.0002 76.185/2.9994 76.205/3.0002 76.185/2.9994 76.205/3.0002

81.082/3.1922 81.102/3.1930 81.082/3.1922 81.102/3.1930 81.082/3.1922 81.102/3.1930

2.433/0.0958 .011/.0004 .076/.0030 2.433/0.0958 .011/.0004 .076/.0030 2.433/0.0958 .011/.0004 .076/.0030

Main - engines 1977-1989 - half groove. 1,2,4,5 76.185/2.9994 81.082/3.1922 2.433/0.0958 Std. 01 10 20 30 40 76.205/3.0002 81.102/3.1930 1,2,4,5 76.185/2.9994 81.082/3.1922 2.433/0.0958 76.205/3.0002 81.102/3.1930 3 (Fl) 76.185/2.9994 81.082/3.1922 2.433/0.0958 76.205/3.0002 81.102/3.1930 3 (Fl) 76.185/2.9994 81.082/3.1922 2.433/0.0958 76.205/3.0002 81.102/3.1930 To be superceded by 5M1432A when stock exhausted.

5M1432P

360

.011/.0004 .076/.0030 .011/.0004 .076/.0030 .011/.0004 .076/.0030 .011/.0004 .076/.0030

2177 U 5207 L 2178 U 5209 L

MERCURY Type and Location

Standard Shaft Size

Housing Bore

Max. Bearing Thickness

Vertical Oil Clearance

Max. Overall Length

Material Code

Qty. Set

Bearing Shell No.

Engine Set No. Sizes Available

(Cont’d.) Main - optional set to 5M1432A with +0.010" overflange length increase for undersizes. *See below for dimensional information. 76.185/2.9994 81.082/3.1922 2.433/0.0958 .011/.0004 21.26/0.837 F810 4 2177A 1,2,4,5 76.205/3.0002 81.102/3.1930 .076/.0030 U 1,2,4,5

76.185/2.9994 76.205/3.0002

81.082/3.1922 81.102/3.1930

2.433/0.0958 .011/.0004 .076/.0030

21.26/0.837

F810

5207A L

3 (Fl)

76.185/2.9994 76.205/3.0002

81.082/3.1922 81.102/3.1930

2.433/0.0958 .011/.0004 .076/.0030

29.03/1.143

F810

2170A U

3 (Fl)

76.185/2.9994 76.205/3.0002

81.082/3.1922 81.102/3.1930

2.433/0.0958 .011/.0004 .076/.0030

29.03/1.143

F810

5249A L

.010" u/s shaft .020" u/s shaft .030" u/s shaft .040" u/s shaft

5M5249A 10 20 30 40

* DIMENSIONAL INFORMATION FOR 5M5249A Overall Width (Nominal) Increase in Width 1.143" +0.010" 1.143" +0.010" 1.143" +0.010" 1.143" +0.010"

3 (IH)

2178A IH

Main - engines 1969-1976 - full groove. To be superceded by 5M981A when stock exhausted. 1,2,4,5 76.185/2.9994 81.082/3.1922 2.433/0.0958 .011/.0004 21.26/0.837 F780 76.205/3.0002 81.102/3.1930 .076/.0030

2177 IH

3 (Fl)

76.185/2.9994 81.082/3.1922 2.433/0.0958 .011/.0004 76.205/3.0002 81.102/3.1930 .076/.0030 Overflange length remains constant for standard and undersizes.

28.78/1.133

F810

F780

2177A IH

5M981A Std. 10 20 30 40

5M981P Std. 01 10 20 30 40

2178 IH

Main - optional set to 5M981A with +0.010" overflange length increase for undersizes. *See below for dimensional information. 1,2,4,5 76.185/2.9994 81.082/3.1922 2.433/0.0958 .011/.0004 21.26/0.837 F810 8 2177A 76.205/3.0002 81.102/3.1930 .076/.0030 IH 3 (Fl) 76.185/2.9994 81.082/3.1922 2.433/0.0958 .011/.0004 29.03/1.143 F810 2 2170A 76.205/3.0002 81.102/3.1930 .076/.0030 IH

.010" u/s shaft .020" u/s shaft .030" u/s shaft .040" u/s shaft

5M982A 10 20 30 40

* DIMENSIONAL INFORMATION FOR 5M982A Overall Width (Nominal) Increase in Width 1.143" +0.010" 1.143" +0.010" 1.143" +0.010" 1.143" +0.010"

Main - optional set to 5M981P with +0.010" overflange length increase for undersizes. To be superceded by 5M982A when stock exhausted. 1,2,4,5 76.185/2.9994 81.082/3.1922 2.433/0.0958 .011/.0004 21.26/0.837 F780 8 2177 76.205/3.0002 81.102/3.1930 .076/.0030 IH 3 (Fl) 76.185/2.9994 81.082/3.1922 2.433/0.0958 .011/.0004 29.03/1.143 F780 2 2170 76.205/3.0002 81.102/3.1930 .076/.0030 IH Stock not available from fee warehouses. * DIMENSIONAL INFORMATION FOR 5M982P Overall Width (Nominal) Increase in Width .010" u/s shaft 1.143" +0.010" .020" u/s shaft 1.143" +0.010" .030" u/s shaft 1.143" +0.010" .040’ u/s shaft 1.143" +0.010"

361

5M982P 10 20 30 40

MERCURY Engine Set No. Sizes Available

Type and Location

Max. Overall Length

Material Code

Qty. Set

Bearing Shell No.

1.530/0.0602

16.89/0.665

F23

F-18-1

55.600/2.1890 55.626/2.1900

1.530/0.0602

16.89/0.665

F23

F-18-2

55.220/2.1740 55.245/2.1750 54.839/2.1590 54.864/2.1600 54.458/2.1440 54.483/2.1450

1.530/0.0602

16.89/0.665

F23

F-18-3

1.530/0.0602

16.89/0.665

F23

F-18-4

1.530/0.0602

16.89/0.665

F23

F-18-5

Standard Shaft Size

Housing Bore

52.845/2.0805 52.870/2.0815

55.982/2.2040 56.007/2.2050

52.464/2.0655 52.490/2.0665

52.083/2.0505 52.108/2.0515 51.702/2.0355 51.727/2.0365 51.321/2.0205 51.346/2.0215

Max. Bearing Thickness

Vertical Oil Clearance

24 (Contâ&#x20AC;&#x2122;d.) 5C510S

Cam 1

Std.

4 5

ENGINE

VIN CYL

Bore x Stroke

351 (5.8) Cleveland 351 (5.8) Cleveland 351 (5.8) Cleveland

H M Q

4.00 x 3.50 4.00 x 3.50 4.00 x 3.50

V8 V8 V8

TORQUE SETTINGS Connecting Rod 40-45 ft.lbs/54-61 Nm Main Bearing 95-105 ft.lbs./129-142 Nm

Rod

8B927P

58.682/2.3103 58.702/2.3111

Std. 01 10 20 30 40

8B927PO/S2 10 20 30 40

61.880/2.4362 61.897/2.4369

1.588/0.0625 .002/.0001 .065/.0026

Rod - .002" oversize OD version of 8B927P. 58.682/2.3103 61.931/2.4382 1.740/0.0685 .003/.0001 58.702/2.3111 61.948/2.4390 (@ .010" u/s) .066/.0026

Main - half groove. 1,2,4,5 69.809/2.7484 74.719/2.9417 2.443/0.0962 Std. 01 10 20 30 40 69.830/2.7492 74.740/2.9425 3 (Fl) 69.809/2.7484 74.719/2.9417 2.443/0.0962 69.830/2.7492 74.740/2.9425 Overflange length remains constant for standard and undersizes.

5M1010P

5C710C Std.

Cam - Performance 53.950/2.1240 1 53.975/2.1250 2 3 4 5

5C710S

Cam 1

Std. 2 3 4 5

.003/.0001 .071/.0028 .003/.0001 .071/.0028

18.44/0.726

F780

2106C IH

18.18/0.716

F780

9051 IH

22.35/0.880

F780

28.40/1.118

F780

2107 U/L 2108 U/L

57.137/2.2495 57.163/2.2505

1.565/0.0616

16.89/0.665

F23

FP-26-1

52.464/2.0655 52.489/2.0665 52.083/2.0505 52.108/2.0515 51.702/2.0355 51.727/2.0365 51.321/2.0205 51.346/2.0215

55.600/2.1890 55.626/2.1900 55.220/2.1740 55.245/2.1750 54.839/2.1590 54.864/2.1600 54.458/2.1440 54.483/2.1450

1.530/0.0602

16.89/0.665

F23

FP-18-2

1.530/0.0602

16.89/0.665

F23

FP-18-3

1.530/0.0602

16.89/0.665

F23

FP-18-4

1.530/0.0602

16.89/0.665

F23

FP-18-5

53.950/2.1240 53.975/2.1250

57.137/2.2495 57.163/2.2505

1.565/0.0616

16.89/0.665

F23

F-26-1

52.464/2.0655 52.489/2.0665 52.083/2.0505 52.108/2.0515 51.702/2.0355 51.727/2.0365 51.321/2.0205 51.346/2.0215

55.600/2.1890 55.626/2.1900 55.220/2.1740 55.245/2.1750 54.839/2.1590 54.864/2.1600 54.458/2.1440 54.483/2.1450

1.530/0.0602

16.89/0.665

F23

F-18-2

1.530/0.0602

16.89/0.665

F23

F-18-3

1.530/0.0602

16.89/0.665

F23

F-18-4

1.530/0.0602

16.89/0.665

F23

F-18-5

ENGINE

VIN CYL

Bore x Stroke

351 (5.8) Modified 400 (6.6)

H S

4.00 x 3.50 4.00 x 4.00

V8 V8

TORQUE SETTINGS Connecting Rod 40-45 ft.lbs/54-61 Nm Main Bearing 35-45 ft.lbs/47-61 Nm (3/8" bolts only) Main Bearing 95-105 ft.lbs/129-142 Nm (1/2" bolts only)

Rod

8B927P Std. 01 10 20 30 40

58.682/2.3103 58.702/2.3111

61.880/2.4362 61.897/2.4369

1.588/0.0625 .002/.0001 .065/.0026

362

18.44/0.726

F780

2106C IH

MERCURY Type and Location

Standard Shaft Size

Housing Bore

Max. Bearing Thickness

Vertical Oil Clearance

Max. Overall Length

Material Code

Qty. Set

Bearing Shell No.

Engine Set No. Sizes Available

(Contâ&#x20AC;&#x2122;d.) Rod - .002" oversize OD version of 8B927P. 58.682/2.3103 61.931/2.4382 1.740/0.0685 .003/.0001 58.702/2.3111 61.948/2.4390 (@ .010" u/s) .066/.0026

18.18/0.716

F780

Main - High Strength Aluminum Silicon material. For engines 1977-1979 - half groove. 1,2,4,5 76.185/2.9994 81.082/3.1922 2.433/0.0958 .011/.0004 21.26/0.837 F810 76.205/3.0002 81.102/3.1930 .076/.0030 1,2,4,5 76.185/2.9994 81.082/3.1922 2.433/0.0958 .011/.0004 21.26/0.837 F810 76.205/3.0002 81.102/3.1930 .076/.0030 3 (Fl) 76.185/2.9994 81.082/3.1922 2.433/0.0958 .011/.0004 28.78/1.133 F810 76.205/3.0002 81.102/3.1930 .076/.0030 3 (Fl) 76.185/2.9994 81.082/3.1922 2.433/0.0958 .011/.0004 28.78/1.133 F810 76.205/3.0002 81.102/3.1930 .076/.0030 Overflange length remains constant for standard and undersizes. Main - engines 1977-1979 half groove. 1,2,4,5 76.185/2.9994 81.082/3.1922 76.205/3.0002 81.102/3.1930 1,2,4,5 76.185/2.9994 81.082/3.1922 76.205/3.0002 81.102/3.1930 3 (Fl) 76.185/2.9994 81.082/3.1922 76.205/3.0002 81.102/3.1930

2.433/0.0958 .011/.0004 .076/.0030 2.433/0.0958 .011/.0004 .076/.0030 2.433/0.0958 .011/.0004 .076/.0030

3 (Fl)

76.185/2.9994 81.082/3.1922 2.433/0.0958 .011/.0004 76.205/3.0002 81.102/3.1930 .076/.0030 To be superceded by 5M1432A when stock exhausted.

21.26/0.837

F780

4 4 1 1

21.26/0.837

F780

28.78/1.133

F780

28.78/1.133

F780

9051 IH 2177A U 5207A L 2178A U 5209A L

2177 U 5207 L 2178 U

3 (Fl) 3 (Fl)

76.185/2.9994 76.205/3.0002 76.185/2.9994 76.205/3.0002

81.082/3.1922 81.102/3.1930 81.082/3.1922 81.102/3.1930

2.433/0.0958 .011/.0004 .076/.0030 2.433/0.0958 .011/.0004 .076/.0030

21.26/0.837

F810

29.03/1.143

F810

76.185/2.9994 76.205/3.0002

81.082/3.1922 81.102/3.1930

2.433/0.0958 .011/.0004 .076/.0030

29.03/1.143

F810

.010" u/s shaft .020" u/s shaft .030" u/s shaft .040" u/s shaft

8B927PO/S2 10 20 30 40

5M1432A Std. 10 20 30 40

5M1432P Std. 01 10 20 30 40

5209 L

Main - optional set to 5M1432A with +0.010" overflange length increase for undersizes. *See dimensional information below. 76.185/2.9994 81.082/3.1922 2.433/0.0958 .011/.0004 21.26/0.837 F810 4 2177A 1,2,4,5 76.205/3.0002 81.102/3.1930 .076/.0030 U 1,2,4,5

5M5249A 10 20 30 40

5207A L 2170A U 5249A L

* DIMENSIONAL INFORMATION FOR 5M5249A Overall Width (Nominal) Increase in Width 1.143" +0.010" 1.143" +0.010" 1.143" +0.010" 1.143" +0.010"

3 (IH)

2178A IH

2177 IH 2178 IH

76.185/2.9994 81.082/3.1922 2.433/0.0958 .011/.0004 76.205/3.0002 81.102/3.1930 .076/.0030 Overflange length remains constant for standard and undersizes.

28.78/1.133

F810

Main - engines 1971-1976 - full groove. To be superceded by 5M981A when stock exhausted. 1,2,4,5 76.185/2.9994 81.082/3.1922 2.433/0.0958 .011/.0004 21.26/0.837 F780 76.205/3.0002 81.102/3.1930 .076/.0030 3 (Fl) 76.185/2.9994 81.082/3.1922 2.433/0.0958 .011/.0004 28.78/1.133 F780 76.205/3.0002 81.102/3.1930 .076/.0030 Overflange length remains constant for standard and undersizes.

363

2177A IH

5M981A Std. 10 20 30 40

5M981P Std. 01 10 20 30 40

MERCURY Engine Set No. Sizes Available

Type and Location

Standard Shaft Size

Housing Bore

Max. Bearing Thickness

Vertical Oil Clearance

Max. Overall Length

Material Code

Qty. Set

Bearing Shell No.

26 (Cont’d.)

5M982A 10 20 30 40

Main - optional set to 5M981A with +0.010" overflange length increase for undersizes. *See dimensional information below. 76.185/2.9994 81.082/3.1922 2.433/0.0958 .011/.0004 21.26/0.837 F810 8 2177A 1,2,4,5 76.205/3.0002 81.102/3.1930 .076/.0030 IH 3 (Fl)

76.185/2.9994 76.205/3.0002

.010" u/s shaft .020" u/s shaft .030" u/s shaft .040" u/s shaft

5M982P 10 20 30 40

81.082/3.1922 81.102/3.1930

2.433/0.0958 .011/.0004 .076/.0030

29.03/1.143

F810

2170A IH

* DIMENSIONAL INFORMATION FOR 5M982A Overall Width (Nominal) Increase in Width 1.143" +0.010" 1.143" +0.010" 1.143" +0.010" 1.143" +0.010"

76.185/2.9994 81.082/3.1922 76.205/3.0002 81.102/3.1930 Stock not available from fee warehouses.

2.433/0.0958 .011/.0004 .076/.0030

29.03/1.143

F780

2170 IH

5C710C Std.

Cam - Performance 53.950/2.1240 1 53.975/2.1250 2 3 4 5

5C710S

Cam 1

Std. 2 3 4 5

57.137/2.2495 57.163/2.2505

1.565/0.0616

16.89/0.665

F23

FP-26-1

52.464/2.0655 52.489/2.0665 52.083/2.0505 52.108/2.0515 51.702/2.0355 51.727/2.0365

55.600/2.1890 55.626/2.1900 55.220/2.1740 55.245/2.1750 54.839/2.1590 54.864/2.1600

1.530/0.0602

16.89/0.665

F23

FP-18-2

1.530/0.0602

16.89/0.665

F23

FP-18-3

1.530/0.0602

16.89/0.665

F23

FP-18-4

51.321/2.0205 51.346/2.0215

54.458/2.1440 54.483/2.1450

1.530/0.0602

16.89/0.665

F23

FP-18-5

53.950/2.1240 53.975/2.1250

57.137/2.2495 57.163/2.2505

1.565/0.0616

16.89/0.665

F23

F-26-1

52.464/2.0655 52.489/2.0665 52.083/2.0505 52.108/2.0515

55.600/2.1890 55.626/2.1900 55.220/2.1740 55.245/2.1750

1.530/0.0602

16.89/0.665

F23

F-18-2

1.530/0.0602

16.89/0.665

F23

F-18-3

51.702/2.0355 51.727/2.0365 51.321/2.0205 51.346/2.0215

54.839/2.1590 54.864/2.1600 54.458/2.1440 54.483/2.1450

1.530/0.0602

16.89/0.665

F23

F-18-4

1.530/0.0602

16.89/0.665

F23

F-18-5

364

MERCURY Type and Location

Standard Shaft Size

ENGINE 390 (6.4) 390 (6.4) 390 (6.4) 390 (6.4) 390 (6.4) 410 (6.7) 427 (7.0) 427 (7.0) 428 (7.0) 428 (7.0) 428 (7.0) 428 (7.0)

Max. Bearing Thickness

Housing Bore

VIN CYL S X Y Z W P Q R

V8 V8 V8 V8 V8 V8 V8 V8 V8 V8 V8 V8

Vertical Oil Clearance

Bore x Stroke

Max. Overall Length

Material Code

Qty. Set

Bearing Shell No.

Engine Set No. Sizes Available

TORQUE SETTINGS

Connecting Rod 40-45 ft.lbs/54-61 Nm (All except 427

4.05 x 3.78 4.05 x 3.78 4.05 x 3.78 4.05 x 3.78 4.05 x 3.78 4.05 x 3.98 4.23 x 3.78 4.23 x 3.78 4.23 x 3.78 4.23 x 3.78 4.23 x 3.78 4.23 x 3.78

engines)

Connecting Rod 53-58 ft.lbs/72-79 Nm (427 engines only) Main Bearing 95-105 ft.lbs/129-142 Nm

Rod 61.925/2.4380 61.946/2.4388

65.804/2.5907 65.824/2.5915

1.923/0.0757 .012/.0005 .078/.0031

Rod - .002" oversize OD version of 8B760P. 61.925/2.4380 65.855/2.5927 2.075/0.0817 .013/.0005 61.946/2.4388 65.875/2.5935 (@ .010" u/s) .080/.0031

18.67/0.735

F780

2110 IH 9061 IH

69.809/2.7484 74.706/2.9412 69.830/2.7492 74.727/2.9420 Stock not available from fee warehouses.

.010" u/s shaft .020" u/s shaft .030" u/s shaft .040" u/s shaft

2.425/0.0955 .068/.0027

28.65/1.128

F780

3(Fl)

28.40/1.118

F780

2114 IH

Main - engines 1966-70 with 3.888"-3.948" flange O.D. - full groove. 69.809/2.7484 74.706/2.9412 2.433/0.0958 .010/.0004 1,2,4,5 69.830/2.7492 74.727/2.9420 .078/.0031

23.17/0.912

F780

2115 IH

3 (Fl)

28.40/1.118

F780

2118 IH

15.88/0.625

F23

F-33-1

15.88/0.625

F23

F-15-2

15.88/0.625

F23

F-15-3

15.88/0.625

F23

F-14-4

1.560/0.0616

14.35/0.565

F23

F-15-5

Small End - Bush has light ream allowance. 26.314/1.0360 0.927/0.0365 26.365/1.0380

31.75/1.250

F100

223-3501

Small End - Bush has boring allowance. 26.314/1.0360 26.365/1.0380

30.23/1.190

69.809/2.7484 74.706/2.9412 2.425/0.0955 .068/.0027 69.830/2.7492 74.727/2.9420 Overflange length remains constant for standard and undersizes.

69.809/2.7484 74.706/2.9412 2.441/0.0961 .010/.0004 69.830/2.7492 74.727/2.9420 .078/.0031 Overflange length remains constant for standard and undersizes. Cam - all engines except 1966-67 427 wedge head. 53.945/2.1238 58.661/2.3095 2.320/0.0913 1 54.970/2.1248 58.687/2.3105 2 53.945/2.1238 58.280/2.2945 2.140/0.0841 54.970/2.1248 58.306/2.2955 3 53.945/2.1238 57.899/2.2795 1.950/0.0766 54.970/2.1248 57.925/2.2805 4 53.945/2.1238 57.518/2.2645 1.760/0.0691 54.970/2.1248 57.544/2.2655 57.137/2.2495 57.163/2.2505

10 20 30 40

5M2119P 10 20 30 40

* DIMENSIONAL INFORMATION FOR 5M2119P Overall Width (Nominal) Increase in Width 1.128" +0.010" 1.128" +0.010" 1.128" +0.010" 1.128" +0.010"

23.17/0.912

53.945/2.1238 54.970/2.1248

8B760PO/S2

2119 IH

Main - engines 1964-65 with 3.764"-3.829" flange O.D. - full groove. 69.809/2.7484 74.706/2.9412 2.420/0.0953 .010/.0004 1,2,4,5 69.830/2.7492 74.727/2.9420 .078/.0031

8B760P Std. 10 20 30 40

F780

2115 IH

5M685P Std. 10 20 30 40

5M863P Std. 10 20 30 40

5C781S Std.

AB02127R Ream

1.044/0.0411

F100

223-3598

AB02201 Semi

365

MERCURY Engine Set No. Sizes Available

Type and Location

Standard Shaft Size

Housing Bore

Max. Bearing Thickness

Vertical Oil Clearance

ENGINE

VIN CYL

Bore x Stroke

429 (7.0) 429 (7.0) 429 (7.0) 429 (7.0) 429 (7.0) 460 (7.5) 460 (7.5)

C J K N Z A C

4.36 x 3.59 4.36 x 3.59 4.36 x 3.59 4.36 x 3.59 4.36 x 3.59 4.36 x 3.85 4.36 x 3.85

V8 V8 V8 V8 V8 V8 V8

Max. Overall Length

Material Code

Qty. Set

Bearing Shell No.

TORQUE SETTINGS Connecting Rod 40-45 ft.lbs/54-61 Nm Main Bearing 95-105 ft.lbs/129-142 Nm

Rod

8B818P

63.480/2.4992 63.500/2.5000

Std. 10 20 30 40

67.366/2.6522 67.386/2.6530

1.927/0.0759 .012/.0005 .078/.0031

22.00/0.866

Main - Position 1,2,4,5 is half groove & Position 3 (Fl) is full groove. 1,2,4,5 76.185/2.9994 81.082/3.1922 2.432/0.0957 .013/.0005 24.13/0.950 Std. 10 20 30 40 76.205/3.0002 81.102/3.1930 .079/.0031 3 (Fl) 76.185/2.9994 81.082/3.1922 2.432/0.0957 .013/.0005 28.45/1.120 76.205/3.0002 81.102/3.1930 .079/.0031 Overflange length remains constant for standard and undersizes.

5M1039P

5M5218P 10 20 30 40

76.185/2.9994 81.082/3.1922 76.205/3.0002 81.102/3.1930 Stock not available from fee warehouses.

.010" u/s shaft .020" u/s shaft .030" u/s shaft .040" u/s shaft

Std.

5C1766S Std.

5210 IH

F780

5212 U/L 5214 IH

5C1111S

F780

Cam 1-5

53.950/2.1240 53.975/2.1250

2.557/0.1007 .013/.0005 (@ .010" u/s) .079/.0031

28.70/1.130

F780

5218 IH

* DIMENSIONAL INFORMATION FOR 5M5218P Overall Width (Nominal) Increase in Width 1.130" +0.010" 1.130" +0.010" 1.130" +0.010" 1.130" +0.010"

57.137/2.2495 57.163/2.2505

1.570/0.0618

14.86/0.585

F23

F-30-1

Cam - Oversize OD Cam set. Align bore housing to 2.2645"/2.2655". 53.944/2.1238 57.518/2.2645 1.763/0.0694 .028/.0011 16.00/0.630 1-5 53.969/2.1248 57.544/2.2655 .127/.0050

F820

SH1766

366

MG MG ENGINE INDEX Engine Disp.

Notation

58 1000cc (1.0)..... 67 (1.1) ................. 67 1098cc ............. 1275cc (1.3)......... 1275cc (1.3)......... 78 1275cc (1.3)..... 91 1493cc (1.5).....

VIN

Cyl.

1098cc 1100 A 1300

L4 L4 L4 L4 L4 L4 L4

Year Line Engine Disp. 62-62 63-66 62-68 66-73 74-74 67-71 53-61

1 1 2 3 3 4 5

Notation

97 (1.6) ................. 1622cc (1.6)......... 1798cc (1.8)......... 1798cc (1.8)......... 1798cc (1.8)......... 216 3532cc (3.5)... 216 3532cc (3.5)...

VIN

1588cc H J 1

Cyl. L4 L4 L4 L4 L4 V8 V8

Year Line 59-62 61-68 62-73 74-79 80-81 69-74 75-77

5 6 7 7 7 8 8

MG MODEL INDEX Model MGA

CID

91 97

1493

MGB 216 MGB - GT Type and Location

Standard Shaft Size

ENGINE

1798 3532 1798

Liter

Description

1.5 1.6 1588cc 1.8 3.5 1.8 Max. Bearing Thickness

Housing Bore

VIN CYL

58 1000cc (1.0) 67 (1.1) 1098cc

L4 L4

Years 56-59 60-62 63-81 75-77 63-74

CID

MIDGET

Model

58 67

1000

Vertical Oil Clearance

Max. Overall Length

Bore x Stroke

1.826/0.0719 .020/.0008 .071/.0028

22.35/0.880

Main - 1.190" wide bearings. 44.463/1.7505 48.158/1.8960 1,2,3 44.475/1.7510 48.171/1.8965

1.834/0.0722 .015/.0006 .066/.0026

30.22/1.190

42.278/1.6645 42.291/1.6650

ENGINE

45.606/1.7955 45.631/1.7965

VIN CYL

67 1098cc 1100

2.36/0.093

1.638/0.0645 .039/.0015 .127/.0050

Bearing Shell No.

Years 62 63-66 67-74 57-58

Engine Set No. Sizes Available

Connecting Rod 35 ft.lbs/47 Nm Main Bearing 60 ft.lbs/81 Nm

Rod - 0.880" wide bearings. 41.285/1.6254 44.971/1.7705 41.298/1.6259 44.983/1.7710

Cam 1

Qty. Set

Description

1.0 1.1 1098cc 1.3 1.5

TORQUE SETTINGS

62.9mm x 76.2mm 64.5mm x 84mm

Thrust - 2.4450" O.D. - heavy duty material. 2 49.911/1.9650 61.849/2.4350 50.165/1.9750 62.103/2.4450 Note: Set includes four pieces, use on No. 2 position. Required with 3M2202 main set.

Material Code

1275 1493

Liter

28.83/1.135

F780

F250

F23

4B2201

2201 IH

Std. 10 20 30 40

2202 IH

Std. 10 20 30 40

3M2202

2202T U/L

2T2202

4096

1C4096

Std.

Bore x Stroke

TORQUE SETTINGS

64.5mm x 84mm

Connecting Rod 35 ft.lbs/47 Nm Main Bearing 70-75 ft.lbs/95-101 Nm

Rod 41.285/1.6254 41.298/1.6259

44.971/1.7705 44.983/1.7710

1.826/0.0719 .020/.0008 .071/.0028

22.35/0.880

Main - 1.067" wide bearings. 1,2,3 44.463/1.7505 48.158/1.8960 44.475/1.7510 48.171/1.8965

1.829/0.0720 .025/.0010 .076/.0030

27.10/1.067

Thrust - 2.8350" O.D. 2 49.910/1.9650 71.760/2.8252 50.160/1.9748 72.010/2.8350 Note: Set includes four pieces, use on No. 2 position. Required with 3M2203 main set. Cam 1

2.36/0.093

F780

F250

Std. 10 20 30 40

2203 IH

Std. 10 20 30 40 50

2T2203

3C4095

45.606/1.7955 45.631/1.7965

1.638/0.0645 .039/.0015 .127/.0050

28.83/1.135

F23

4096

41.217/1.6227 41.229/1.6232 34.867/1.3727 34.879/1.3732

44.526/1.7530 44.552/1.7540 38.176/1.5030 38.202/1.5040

1.628/0.0641 .041/.0016 .129/.0051 1.628/0.0641 .041/.0016 .129/.0051

19.30/0.760

F23

4094

13.74/0.541

F23

4095

Small End - not bored. 15.862/0.6245 15.875/0.6250

19.037/0.7495 19.062/0.7505

22.22/0.875

F100

RB843

3M2203

2203T U/L

42.278/1.6645 42.291/1.6650

4B2201

2201 IH

Std.

RB843 Semi

367

MG Engine Set No. Sizes Available

Type and Location

Standard Shaft Size

ENGINE

VIN CYL

1275cc (1.3) 1275cc (1.3)

4B2206 Std. 10 20 30 40

3M2204

Std.

3C4099 Std.

3M2204

Std.

3C4095 Std.

Qty. Set

Bearing Shell No.

TORQUE SETTINGS Connecting Rod 35 ft.lbs/47 Nm Main Bearing 60 ft.lbs/81 Nm

2206 IH

1.829/0.0720 .025/.0010 .076/.0030

25.52/1.005

F780

2204 IH

2.36/0.093

F250

2204T U/L

Cam - for engines with #1, 1.135". #2, 0.760"; #3, 0.760" wide bushes. 42.278/1.6645 45.606/1.7955 1.638/0.0645 .039/.0015 28.83/1.135 1 42.291/1.6650 45.631/1.7965 .127/.0050

F23

4096

19.30/0.760

F23

4094

19.30/0.760

F23

4099

Main 1,2,3

50.183/2.0005 50.825/2.0010

54.508/2.1460 54.521/2.1465

Thrust 2

56.260/2.2150 76.070/2.9949 56.510/2.2248 76.330/3.0051 Note: Set includes four pieces, use on No. 2 position. Required with 3M2204 main set.

41.217/1.6227 41.229/1.6232 34.867/1.3727 34.887/1.3735

44.526/1.7530 44.552/1.7540 38.189/1.5035 38.209/1.5043

VIN CYL L4

Rod - 0.880" wide bearings. 41.285/1.6254 44.971/1.7705 41.298/1.6259 44.983/1.7710

1.628/0.0641 .041/.0016 .129/.0051 1.641/0.0646 .020/.0008 .112/.0044

Bore x Stroke 70.5mm x 81mm

TORQUE SETTINGS Connecting Rod 35 ft.lbs Main Bearing 60 ft.lbs

1.826/0.0719 .020/.0008 .071/.0028

22.35/0.880

F780

2201 IH

1.829/0.0720 .025/.0010 .076/.0030

25.52/1.005

F780

2204 IH

2.36/0.093

F250

2204T U/L

Cam - for engines with #1, 1.135", #2, 0.760"; #3, 0.541" wide bushes. 42.278/1.6645 45.606/1.7955 1.638/0.0645 .039/.0015 28.83/1.135 1 42.291/1.6650 45.631/1.7965 .127/.0050

F23

4096

19.30/0.760

F23

4094

13.74/0.541

F23

4095

Main 1,2,3

50.183/2.0005 50.825/2.0010

54.508/2.1460 54.521/2.1465

Thrust 2

56.260/2.2150 76.070/2.9949 56.510/2.2248 76.330/3.0051 Note: Set includes four pieces, use on No. 2 position. Required with 3M2204 main set.

Material Code

Std. 10 20 30 40

2T2204

Bore x Stroke 70.5mm x 81mm 70.5mm x 81mm

Max. Overall Length

F780

78 1275cc (1.3) 1300

Std. 10 20 30 40

Vertical Oil Clearance

21.59/0.850

ENGINE

4B2201

Max. Bearing Thickness

1.824/0.0718 .025/.0010 .076/.0030

L4 L4

Rod - 0.850" wide bearing. 44.460/1.7504 48.146/1.8955 44.473/1.7509 48.158/1.8960

Std. 10 20 30 40

2T2204

Housing Bore

41.217/1.6227 41.229/1.6232 34.867/1.3727 34.879/1.3732

ENGINE

44.526/1.7530 44.552/1.7540 38.176/1.5030 38.202/1.5040

VIN CYL

91 1493cc (1.5) 97 (1.6) 1588cc

L4 L4

1.628/0.0641 .041/.0016 .129/.0051 1.628/0.0641 .041/.0016 .129/.0051

Bore x Stroke 73mm x 88.9mm 75.4mm x 89mm

TORQUE SETTINGS Connecting Rod 23-35 ft.lbs/31-47 Nm Main Bearing 70-75 ft.lbs/95-102 Nm

Rod

4B1891 Std. 10 20 30 40

3M4302

Main 1,2,3

Std. 10 20 30 40

47.648/1.8759 47.661/1.8764

51.333/2.0210 51.346/2.0215

1.824/0.0718 .024/.0009 .076/.0030

25.53/1.005

F780

1891 IH

50.813/2.0005 50.825/2.0010

54.508/2.1460 54.521/2.1465

1.829/0.0720 .025/.0010 .076/.0030

35.05/1.380

F23

4302 IH

56.261/2.2150 56.515/2.2250

69.596/2.7400 69.850/2.7500

2.36/0.093

4302T U/L

Thrust

2T4302 Std.

368

MG Type and Location

Standard Shaft Size

Max. Bearing Thickness

Housing Bore

Vertical Oil Clearance

Max. Overall Length

Material Code

Qty. Set

Bearing Shell No.

Engine Set No. Sizes Available

(Contâ&#x20AC;&#x2122;d.) Cam 1

45.433/1.7887 45.446/1.7892

48.641/1.9150 48.666/1.9160

1.585/0.0624 .025/.0010 .076/.0030

37.57/1.479

F23

4306

43.909/1.7287 43.922/1.7292

47.117/1.8550 47.142/1.8560

1.585/0.0624 .025/.0010 .076/.0030

28.83/1.135

F23

4307

41.217/1.6227 41.229/1.6232

44.425/1.7490 44.450/1.7500

1.585/0.0624 .025/.0010 .076/.0030

20.89/0.822

F23

4308

ENGINE

VIN CYL

1622cc (1.6)

3C4306 Std.

Bore x Stroke

TORQUE SETTINGS

76.2mm x 89mm

Connecting Rod 23-35 ft.lbs/31-47 Nm Main Bearing 70-75 ft.lbs/95-102 Nm

Rod

Main 1,2,3

47.648/1.8759 47.661/1.8764

51.333/2.0210 51.346/2.0215

1.824/0.0718 .024/.0009 .076/.0030

25.53/1.005

50.813/2.0005 50.825/2.0010

54.508/2.1460 54.521/2.1465

1.836/0.0723 .010/.0004 .051/.0020

31.11/1.225

56.261/2.2150 56.515/2.2250

69.596/2.7400 69.850/2.7500

45.433/1.7887 45.446/1.7892 43.909/1.7287 43.922/1.7292

48.641/1.9150 48.666/1.9160 47.117/1.8550 47.142/1.8560

1.585/0.0624 .025/.0010 .076/.0030 1.585/0.0624 .025/.0010 .076/.0030

41.217/1.6227 41.229/1.6232

44.425/1.7490 44.450/1.7500

1.585/0.0624 .025/.0010 .076/.0030

F780

F820

4B1891

1891 IH

Std. 10 20 30 40

2215AL IH

Std. 10 20 30 40

3M2215

Thrust

Cam 1 2 3

ENGINE 1798cc (1.8) 1798cc (1.8) 1798cc (1.8)

2.36/0.093

VIN CYL H J

L4 L4 L4

Bore x Stroke

4302T U/L

2T4302

3C4306

37.57/1.479

F23

4306

28.83/1.135

F23

4307

20.89/0.822

F23

4308

Std.

TORQUE SETTINGS

80.25mm x 88.9mm Connecting Rod 40-45 ft.lbs/54-61 Nm 80.25mm x 88.9mm Main Bearing 70 ft.lbs/90 Nm 80.25mm x 88.9mm

Rod 47.648/1.8759 47.660/1.8764

51.333/2.0210 51.346/2.0215

1.816/0.0715 .041/.0016 .092/.0036

20.06/0.790

Main - for 1965-80 engines only. 1,3,5 54.013/2.1265 57.683/2.2710 54.026/2.1270 57.696/2.2715 2,4 54.013/2.1265 57.683/2.2710 54.026/2.1270 57.696/2.2715

1.816/0.0715 .025/.0010 .067/.0026 1.816/0.0715 .025/.0010 .067/.0026

28.70/1.130

Thrust 2

59.436/2.3400 74.498/2.9330 59.690/2.3500 74.752/2.9430 Note: Set includes four pieces, use on No. 2 position. Required with 5M2255 main set. Cam 1 2 3

F780

F820

19.55/0.770

F820

2.36/0.093

2250 IH 2254AL IH 2255AL IH

5M2255 Std. 10 20 30

2252T U/L

2T2252

3C4306

45.433/1.7887 45.446/1.7892

48.641/1.9150 48.666/1.9160

1.585/0.0624 .025/.0010 .076/.0030

37.57/1.479

F23

4306

43.909/1.7287 43.922/1.7292 41.217/1.6227 41.229/1.6232

47.117/1.8550 47.142/1.8560 44.425/1.7490 44.450/1.7500

1.585/0.0624 .025/.0010 .076/.0030 1.585/0.0624 .025/.0010 .076/.0030

28.83/1.135

F23

4307

20.89/0.822

F23

4308

27.23/1.072

F100

RB4012

Small End - not bored, single pieces. 20.640/0.8126 23.805/0.9372 (Nominal) 23.825/0.9380

4B2250 Std 10 20 30 40

Std.

RB4012 Semi

369

MG Engine Set No. Sizes Available

Type and Location

Standard Shaft Size

ENGINE

VIN CYL

216 3532cc (3.5) 216 3532cc (3.5)

8B610A Std. 10 20 30 40

5C4326

Housing Bore

V8 V8

Rod - part number was 8B2226. 50.800/2.0000 53.967/2.1247 50.813/2.0005 53.980/2.1252 Cam 1

Std. 2 3 4 5

Max. Bearing Thickness

Vertical Oil Clearance

Bore x Stroke

Max. Overall Length

Material Code

Qty. Set

Bearing Shell No.

TORQUE SETTINGS

88.9mm x 71.12mm Connecting Rod 30-35 ft.lbs/41-47 Nm 88.9mm x 71.12mm Main Bearing #1-4 50-55 ft.lbs/68-75 Nm Main Bearing #5 65-70 ft.lbs/88-95 Nm

1.570/0.0618 .014/.0006 .066/.0026

18.84/0.742

F810

2226A IH

45.339/1.7850 45.364/1.7860

48.654/1.9155 48.704/1.9175

1.633/0.0643 .024/.0009 .150/.0059

19.30/0.760

F23

4326

44.577/1.7550 44.602/1.7560 43.815/1.7250 43.840/1.7260 43.053/1.6950 43.078/1.6960 42.291/1.6650 42.316/1.6660

47.892/1.8855 47.942/1.8875 47.130/1.8555 47.180/1.8575 43.368/1.8255 46.418/1.8275 45.606/1.7955 45.656/1.7975

1.633/0.0643 .024/.0009 .150/.0059 1.633/0.0643 .024/.0009 .150/.0059 1.633/0.0643 .024/.0009 .150/.0059 1.633/0.0643 .024/.0009 .150/.0059

19.30/0.760

F23

4327

19.30/0.760

F23

4328

19.30/0.760

F23

4329

19.30/0.760

F23

4320

370

MITSUBISHI MITSUBISHI ENGINE INDEX Engine Disp. 977cc (1.0)........... 1088cc (1.1)......... 1187cc (1.2)......... 1189cc (1.2)......... 1198cc (1.2)......... 1244cc (1.3)......... 1298cc (1.3)......... 1378cc (1.4)......... 1410cc (1.4)......... 1439cc (1.5)......... 1468cc (1.5)......... 1468cc (1.5)......... 90 1468cc (1.5)..... 90 1468cc (1.5)..... 90 1468cc (1.5)..... 98 1597cc (1.6)..... 98 1597cc (1.6)..... 98 1597cc (1.6)..... 107 1755cc (1.8)... 107 1755cc (1.8)... 1795cc (1.8)......... 1795cc (1.8)......... 112 1834cc (1.8)... 112 1834cc (1.8)... 112 1834cc (1.8)... 1855cc (1.9)......... 1995cc (2.0)......... 122 1997cc (2.0)... 122 1997cc (2.0)... 122 1997cc (2.0)... 122 1997cc (2.0)... 122 1997cc (2.0)... 122 1997cc (2.0)... 122 1997cc (2.0)... 122 1997cc (2.0)... 122 1997cc (2.0)... 122 1997cc (2.0)... 122 1997cc (2.0)...

Notation

VIN

KE43, OHV KE44, OHV 4G42 KE46, OHV 4G16/G16B 4G11/G11B 4G13/G13B 4G41 4G12/G12B 4G33 G4AJ G4DJ 4G15/G15B 4G15/G15B 12V SOHC (4G15) 4G32/G32B, Turbo 4G61 DOHC 4G61 DOHC, Turbo 4G37 4G37 G62B G62B, Turbo 4G93 (4G93) (4G93) 4G51/G51B G52B SOHC (G63B) DOHC (4G63) SOHC (G63B) DOHC (4G63) DOHC (4G63), Turbo DOHC (4G63) DOHC (4G63), Turbo SOHC (4G63) 16V DOHC 16V DOHC (420A) DOHC (4G63), Turbo

J J K X A F Y Z B T 4 G D C 5 D D E F R U V Y Y F

Cyl. L4 L4 L4 L4 L4 L4 L4 L4 L4 L4 L4 L4 L4 L4 L4 L4 L4 L4 L4 L4 L4 L4 L4 L4 L4 L4 L4 L4 L4 L4 L4 L4 L4 L4 L4 L4 L4 L4

Year Line Engine Disp. 63-70 66-72 73-77 68-70 84-88 77-86 84-88 71-79 78-86 73-85 87-89 90-94 85-88 89-90 91-02 85-88 91-92 89-89 93-94 90-92 83-83 84-88 92-92 99-99 93-02 74-80 74-88 83-83 93-93 84-89 93-94 93-95 89-92 90-92 89-92 95-95 96-99 96-98

1 1 1 1 2 2 2 1 2 4 3 3 3 3 3 5 5 5 4 4 6 6 7 7 7 8 10 9 9 9 9 9 9 9 9 11 11 9

Notation

VIN

122 1997cc (2.0)... DOHC (4G63T), Turbo 1999cc (2.0)......... (4G94) 2000cc (2.0)......... 4G94 143 2346cc (2.3)... 4D55 (SOHC), Turbo,Diesel 143 2346cc (2.3)... 4D55 (SOHC), Turbo,Diesel 2351cc (2.4)......... SOHC (4G64) 2351cc (2.4)......... DOHC (4G64) 2351cc (2.4)......... SOHC (G64B) 2351cc (2.4)......... SOHC (4G64) 2351cc (2.4)......... SOHC (4G64) 2351cc (2.4)......... SOHC (4G64) 2476cc (2.5)......... 4D56 (SOHC),Diesel 6G73 2497cc (2.5)......... 156 2555cc (2.6)... G54B 156 2555cc (2.6)... G54B, Turbo 156 2555cc (2.6)... G54B 156 2555cc (2.6)... G54B, Turbo 156 2555cc (2.6)... G54B, Turbo 181 2972cc (3.0)... SOHC (6G72) 181 2972cc (3.0)... DOHC (6G72) 181 2972cc (3.0)... DOHC (6G72), Turbo 181 2972cc (3.0)... SOHC (6G72) 181 2972cc (3.0)... SOHC (6G72) 181 2972cc (3.0)... SOHC (6G72) 181 2972cc (3.0)... SOHC (6G72) 181 2972cc (3.0)... SOHC (6G72) 181 2972cc (3.0)... SOHC (6G72) 181 2972cc (3.0)... DOHC (6G72) 181 2972cc (3.0)... DOHC (6G72), Turbo 181 2972cc (3.0)... SOHC (6G72) 181 2972cc (3.0)... DOHC (6G72T), Turbo 215 3497cc (3.5)... DOHC (6G74) 215 3497cc (3.5)... SOHC (6G74) 215 3497cc (3.5)... SOHC (6G74) 215 3497cc (3.5)... SOHC (6G74) 226 (3.7) ............... 285 (4.7) ...............

E 9 J G L L W G Y 7 7 E H N B C F H L S H J K P K M P R K N

Cyl. L4 L4 L4 L4 L4 L4 L4 L4 L4 L4 L4 L4 V6 L4 L4 L4 L4 L4 V6 V6 V6 V6 V6 V6 V6 V6 V6 V6 V6 V6 V6 V6 V6 V6 V6 V6 V8

Year Line 99-99 05-06 02-04 83-83 84-86 93-94 94-95 85-88 89-92 93-05 02-04 85-91 95-99 83-83 83-83 84-89 84-87 85-89 99-04 91-92 91-92 03-04 93-04 00-03 88-94 99-99 93-05 93-99 93-98 97-03 99-99 94-96 99-00 97-04 97-04 06-06 06-06

9 12 12 8 8 13 13 13 13 13 13 8 14 10 10 10 10 10 15 15 15 15 15 15 15 15 15 15 15 15 15 16 16 16 16 17 18

MITSUBISHI MODEL INDEX Model 3000GT 3000GT - SL 3000GT - SPYDER SL 3000GT - SPYDER VR-4 3000GT - VR-4 3000GT - VR4 CORDIA

CID

Liter

181 181 181 181 181 181

2972 2972 2972 2972 2972 2972

3.0 3.0 3.0 3.0 3.0 3.0

DOHC DOHC (6G72) SOHC DOHC DOHC (6G72) DOHC

93-96 91-92 97-99 93-99 91-92 95-96

181 181 181 181

2972 2972 2972 2972 1795 1997 1795 1997 1795 1997 2972 3497 2972 2972 3497 2972 2972 3497 1755 1997 1997 2351 2972 1755 1997 1997 2351 1997 1997

3.0 3.0 3.0 3.0 1.8 2.0 1.8 2.0 1.8 2.0 3.0 3.5 3.0 3.0 3.5 3.0 3.0 3.5 1.8 2.0 2.0 2.4 3.0 1.8 2.0 2.0 2.4 2.0 2.0

DOHC DOHC DOHC (6G72) DOHC G62B SOHC (G63B) G62B SOHC (G63B) G62B SOHC (G63B) SOHC (6G72) SOHC SOHC SOHC (6G72) SOHC DOHC DOHC (6G72) SOHC 4G37 16V DOHC DOHC SOHC SOHC (6G72) 4G37 16V DOHC DOHC (4G63) SOHC DOHC DOHC (4G63)

95-96 93-98 91-92 99 83-88 84-88 85 84-85 84 84 92 99-04 93-96 93-94 97-98 93-95 92 97-98 90-94 96-99 99 00-04 00-04 90-94 95-98 90-94 05 96-98 95

122 CORDIA - L 122 CORDIA - LS DIAMANTE DIAMANTE - ES DIAMANTE - LS ECLIPSE

ECLIPSE - GS

ECLIPSE - GST

122 181 215 181 181 215 181 181 215 107 122 122 181 107 122 122 122 122

Description

Years

Model ECLIPSE - GSX ECLIPSE - GT ECLIPSE - GTS ECLIPSE - RS ECLIPSE - SPYDER

CID

Liter

122 122 181 181 181 122 122

1997 1997 2972 2972 2972 1997 1997 2351 2972

2.0 2.0 3.0 3.0 3.0 2.0 2.0 2.4 3.0

2351

2.4 SOHC

96-05

122

1997

2.0 DOHC

96-98

181

2972

3.0 SOHC

181 181

2972 2972 2351 2351 2351 2351 1834 1834 2351 1834 2351 1997 2351 2351 2972 2351 1997 2351 1997 2351

3.0 3.0 2.4 2.4 2.4 2.4 1.8 1.8 2.4 1.8 2.4 2.0 2.4 2.4 3.0 2.4 2.0 2.4 2.0 2.4

05 03-04 93-95 92 93 92 93 92 93-94 92 93-94 89-92 00-03 85-87 99-03 97-98 93 94-98 89-92 94

181 ECLIPSE - SPYDER GS ECLIPSE - SPYDER GST ECLIPSE - SPYDER GT ECLIPSE - SPYDER GTS EXPO EXPO - SP EXPO LRV

112 112

EXPO LRV - SPORT

112

GALANT

122 181

GALANT - DE GALANT - ES

122

GALANT - GS

122

371

Description DOHC DOHC (4G63) SOHC SOHC SOHC (6G72) 16V DOHC DOHC SOHC SOHC (6G72)

SOHC SOHC (6G72) SOHC SOHC (4G64) SOHC SOHC (4G64) 4G93 SOHC (4G64) 4G93 SOHC (4G64) SOHC (4G63) SOHC SOHC (G64B) SOHC (6G72) SOHC DOHC (4G63) SOHC DOHC (4G63) DOHC (4G64)

Years 96-98 90-95 05 05 03-04 95-98 99 01-04 01-04

MITSUBISHI MITSUBISHI MODEL INDEX (Cont’d.) Model

CID

Liter

GALANT - GSR GALANT - GSX GALANT - LS

122 122 122 122

GALANT - S

122

GALANT - VR-4 LANCER LANCER - ES LANCER - OZ RALLY MIGHTY MAX

122

1997 1997 1997 1997 2351 1997 2351 1997 2000 1999 1999 1997 2351 2555 2972 2351 2555 1997 2346 2555 2346 2555 1997 2351 2351 2555 2972 1468 1468 1597 1597 1834 1468 1468 1834 1597 1468 1597 1468 1468 1597 1834

2.0 2.0 2.0 2.0 2.4 2.0 2.4 2.0 2.0 2.0 2.0 2.0 2.4 2.6 3.0 2.4 2.6 2.0 2.3 2.6 2.3 2.6 2.0 2.4 2.4 2.6 3.0 1.5 1.5 1.6 1.6 1.8 1.5 1.5 1.8 1.6 1.5 1.6 1.5 1.5 1.6 1.8

122 156 181

MIGHTY MAX - LWB MIGHTY MAX - S MIGHTY MAX - SP MIGHTY MAX - SPX MIGHTY MAX - SWB

MIRAGE

MIRAGE - DE MIRAGE - ES MIRAGE - GS MIRAGE - L MIRAGE - LS

156 122 143 156 143 156 122 156 181 90 90 98 98 112 90 90 112 98 90 98 90 90 98 112

Description DOHC (4G63) DOHC (4G63) DOHC (4G63) SOHC (4G63) SOHC DOHC (4G63) SOHC DOHC (4G63) 4G94 SOHC (G63B) SOHC (4G64) G54B SOHC (6G72) SOHC (4G64) G54B SOHC (G63B) 4D55 (SOHC) G54B 4D55 (SOHC) G54B SOHC (G63B) SOHC SOHC (4G64) G54B SOHC (6G72) 12V SOHC 4G15/G15B 4G32/G32B 4G61 DOHC 12V SOHC 12V SOHC 4G61 DOHC 4G15/G15B 4G32/G32B 12V SOHC 4G15/G15B 4G32/G32B

Years 91-92 90-92 93 89-92 94-98 93 94-96 91-92 02-04 05-06 05-06 83-89 90-94 85-89 90-94 92 89 83-84 83-85 83-85 84 83-89 89 95-96 92 89 92 91-02 85-90 88 89 99-02 97-98 93-95 93-95 91-92 85-87 85 91-93 89 86-87 93-98

Model MIRAGE - RS MIRAGE - S MIRAGE - VL MONTERO MONTERO - LS MONTERO - RS MONTERO - SPORT MONTERO - SR MONTERO SPORT MONTERO SPORT ES MONTERO SPORT LS MONTERO SPORT XLS PRECIS

CID

Liter

90 90 90 90 156 181 215 181 215 181 156 181 181 215 215 181 215

1468 1468 1468 1468 2555 2972 3497 2972 3497 2972 2555 2972 2972 3497 3497 2972 3497

1.5 1.5 1.5 1.5 2.6 3.0 3.5 3.0 3.5 3.0 2.6 3.0 3.0 3.5 3.5 3.0 3.5

2351

2.4 SOHC

97-98

181

2972

3.0 SOHC

97-98

181

2972 1468 1468 1468 1468 1468

3.0 1.5 1.5 1.5 1.5 1.5

SOHC G4AJ G4DJ G4AJ G4AJ G4DJ

97-98 87-89 90-94 87-89 88-89 90-91

2972 2555 2555 2555 2555 1795 1997 1997 1795 1997 2351 2351

3.7 4.7 3.7 4.7 3.0 2.6 2.6 2.6 2.6 1.8 2.0 2.0 1.8 2.0 2.4 2.4

SOHC (6G72) G54B G54B G54B G54B G62B SOHC (G63B) SOHC (G63B) G62B SOHC (G63B) SOHC (4G64) SOHC (G64B)

06 06 06 06 88-90 83-89 84-85 84-85 84 83-88 84-88 84-85 84 84 89-90 87-88

PRECIS - LS PRECIS - RS RAIDER DUROCROSS

226 285 226 285 181 156 156 156 156

RAIDER - LS RAIDER - XLS SIGMA STARION STARION - ES STARION - LE STARION - LS TREDIA

122 122

TREDIA - L TREDIA - LS

122 VAN

Engine Set No. Sizes Available

Type and Location

Standard Shaft Size

ENGINE

Housing Bore

VIN CYL

977cc (1.0) KE43, OHV 1088cc (1.1) KE44, OHV 1187cc (1.2) 4G42 1189cc (1.2) KE46, OHV 1378cc (1.4) 4G41

L4 L4 L4 L4 L4

Max. Bearing Thickness

Vertical Oil Clearance

Bore x Stroke 72mm x 60mm 73mm x 65mm 71mm x 75mm 73mm x 71mm 76.5mm x 75mm

Max. Overall Length

Description 4G15/G15B 12V SOHC 12V SOHC 4G15/G15B G54B SOHC (6G72) SOHC SOHC (6G72) SOHC SOHC (6G72) G54B SOHC (6G72) SOHC (6G72) DOHC (6G74) SOHC SOHC SOHC

Material Code

Qty. Set

Years 90 93-96 91-92 90 83-89 89-93 98-02 89-96 97 91-93 87-88 89-90 92-93 94-96 97 99-03 99-04

Bearing Shell No.

TORQUE SETTINGS Connecting Rod 21-27 ft.lbs/28-37 Nm Main Bearing 36-39 ft.lbs/49-53 Nm

Rod - Non-stock item. Call for availability. 51.976/2.0463 55.000/2.1654 1.488/0.0586 .024/.0009 52.000/2.0472 55.019/2.1661 .091/.0036

22.12/0.871

F780

1141 IH

Main - Non-stock item. Call for availability. 1-3 63.985/2.5191 68.000/2.6772 1.991/0.0784 .018/.0007 Std. .25 .50 .75 1.0 64.000/2.5197 68.020/2.6779 .079/.0031

25.02/0.985

F780

1142 IH

3.56/0.140

1142T U/L

4B1141 Std. .25 .50 .75 1.0

3M1142

1T1142 Std.

Thrust - Non-stock item. Call for availability. 68.326/2.6900 82.169/3.2350 1 68.580/2.7000 82.423/3.2450 Note: Set includes two pieces, use on No. 1 position. Required with 3M1142 main set.

372

MITSUBISHI Type and Location

Standard Shaft Size

Max. Bearing Thickness

Housing Bore

ENGINE

VIN CYL

1198cc (1.2) 4G16/G16B 1244cc (1.3) 4G11/G11B 1298cc (1.3) 4G13/G13B 1410cc (1.4) 4G12/G12B

L4 L4 L4 L4

Vertical Oil Clearance

Max. Overall Length

Bore x Stroke

Material Code

Qty. Set

Bearing Shell No.

Engine Set No. Sizes Available

TORQUE SETTINGS

68.2mm x 82mm 69.5mm x 82mm 71mm x 82mm 74mm x 82mm

Connecting Rod 23-25 ft.lbs/31-34 Nm Main Bearing 36-40 ft.lbs/49-54 Nm

Rod 41.981/1.6528 42.000/1.6535

45.000/1.7717 45.020/1.7724

1.493/0.0588 .015/.0006 .071/.0028

Main 1,2,4,5

47.981/1.8890 52.000/2.0472 1.990/0.0783 48.000/1.8898 52.020/2.0480 3(Fl) 47.980/1.8890 52.000/2.0472 1.990/0.0783 48.000/1.8898 52.020/2.0480 Overflange length remains constant for standard and undersizes.

.020/.0008 .076/.0030 .020/.0008 .076/.0030

17.63/0.694

19.13/0.753 23.95/0.943

ENGINE

VIN CYL

Bore x Stroke

1468cc (1.5) G4AJ 1468cc (1.5) G4DJ 90 1468cc (1.5) 4G15/G15B 90 1468cc (1.5) 4G15/G15B 90 1468cc (1.5) 12V SOHC (4G15)

J J K X A

75.5mm x 82mm 75.5mm x 82mm 75.5mm x 82mm 75.5mm x 82mm 75.5mm x 82mm

L4 L4 L4 L4 L4

F820

F820 F820

8 2

1736AL IH 1737AL IH 1738AL IH

Connecting Rod 23-25 ft.lbs/31-34 Nm Main Bearing 36-40 ft.lbs/49-54 Nm

1.493/0.0588 .015/.0006 .079/.0031

15.60/0.614

Rod - for engines 1985 - 7/88 only. 41.981/1.6528 45.000/1.7717 42.000/1.6535 45.020/1.7724

1.493/0.0588 .015/.0006 .071/.0028

17.63/0.694

Main - for engines 8/88 on. 47.981/1.8890 52.000/2.0472 1,2,4,5 48.000/1.8898 52.020/2.0480

1.990/0.0783 .020/.0008 .085/.0033

19.13/0.753

47.981/1.8890 52.000/2.0472 1.990/0.0783 .020/.0008 48.000/1.8898 52.020/2.0480 .085/.0033 Overflange length remains constant for standard and undersizes.

23.95/0.943

F810

1125A IH

1.990/0.0783 .020/.0008 .076/.0030

19.13/0.753

F820

1737AL IH

47.980/1.8890 52.000/2.0472 1.990/0.0783 .020/.0008 48.000/1.8898 52.020/2.0480 .076/.0030 Overflange length remains constant for standard and undersizes.

23.95/0.943

Main - for engines 1985 - 7/88 only. 1,2,4,5 47.981/1.8890 52.000/2.0472 48.000/1.8898 52.020/2.0480 3(Fl)

ENGINE 1439cc (1.5) 4G33 107 1755cc (1.8) 4G37 107 1755cc (1.8) 4G37

VIN CYL B T

L4 L4 L4

5M1737 Std. .25 .50 .75 1.0

TORQUE SETTINGS

Rod - for engines 8/88 on. 41.981/1.6528 45.000/1.7717 42.000/1.6535 45.020/1.7724

3(Fl)

4B1736 Std. .25 .50 .75 1.0

Bore x Stroke

F810

F820

F810

F820

4B1130

1130A IH

Std. .25 .50 .75 1.0

1736AL IH

Std. .25 .50 .75 1.0

1124A U/L

Std. .25 .50 .75

4B1736

5M1124

5M1737 Std. .25 .50 .75 1.0

1738AL IH

TORQUE SETTINGS

73mm x 86mm 80.6mm x 86mm 80.6mm x 86mm

Connecting Rod 23-25 ft.lbs/31-34 Nm Main Bearing 36-40 ft.lbs/49-54 Nm

Rod 44.991/1.7713 45.000/1.7717

48.000/1.8898 48.020/1.8905

1.494/0.0588 .012/.0005 .067/.0026

Main - half groove bearing set. 1,2,4,5 56.980/2.2433 61.000/2.4016 1.990/0.0783 57.000/2.2441 61.020/2.4024 1,2,4,5 56.980/2.2433 61.000/2.4016 1.990/0.0783 57.000/2.2441 61.020/2.4024 3 (Fl) 56.980/2.2433 61.000/2.4016 1.990/0.0783 57.000/2.2441 61.020/2.4024 Overflange length remains constant for standard and undersizes.

.020/.0008 .086/.0034 .020/.0008 .086/.0034 .020/.0008 .086/.0034

373

23.50/0.925

23.01/0.906

F810

23.01/0.906

F810

28.95/1.140

F810

1146A IH 1147A U 1144A L 1148A IH

4B1146 Std. .25 .50 .75 1.0

5M1144 Std. .25 .50 .75 1.0

MITSUBISHI Engine Set No. Sizes Available

Type and Location

Max. Overall Length

Material Code

Qty. Set

Bearing Shell No.

1.990/0.0783 .020/.0008 .086/.0034

23.00/0.906

F810

1147A IH

56.980/2.2433 61.000/2.4016 1.990/0.0783 .020/.0008 57.000/2.2441 61.020/2.4024 .086/.0034 Overflange length remains constant for standard and undersizes.

28.95/1.140

F810

1148A IH

Standard Shaft Size

Housing Bore

Max. Bearing Thickness

Vertical Oil Clearance

(Contâ&#x20AC;&#x2122;d.)

Main - full groove bearing set. 1,2,4,5 56.980/2.2433 61.000/2.4016 Std. .25 .50 .75 1.0 57.000/2.2441 61.020/2.4024

5M1147

3 (Fl)

ENGINE

VIN CYL

98 1597cc (1.6) 4G32/G32B Turbo F 98 1597cc (1.6) 4G61 DOHC Y 98 1597cc (1.6) 4G61 DOHC Turbo Z

L4 L4 L4

Bore x Stroke 76.9mm x 86mm 82.3mm x 75mm 82.3mm x 75mm

TORQUE SETTINGS Connecting Rod 23-25 ft.lbs/31-34 Nm (Exc. 4G61 engines)

Connecting Rod 37-39 ft.lbs/50-53 Nm (4G61 engines only)

Main Bearing 36-40 ft.lbs/49-54 Nm (Exc. 4G61 Turbo engines)

Main Bearing 47-51 ft.lbs/64-69 Nm (4G61 Turbo engine only) Rod

4B1146

44.991/1.7713 45.000/1.7717

48.000/1.8898 48.020/1.8905

1.494/0.0588 .012/.0005 .067/.0026

23.50/0.925

F810

1146A IH

Main - half groove bearing set. 1,2,4,5 56.980/2.2433 61.000/2.4016 Std. .25 .50 .75 1.0 57.000/2.2441 61.020/2.4024

1.990/0.0783 .020/.0008 .086/.0034

23.01/0.906

F810

1147A U

1.990/0.0783 .020/.0008 .086/.0034

23.01/0.906

F810

1144A L

56.980/2.2433 61.000/2.4016 1.990/0.0783 .020/.0008 57.000/2.2441 61.020/2.4024 .086/.0034 Overflange length remains constant for standard and undersizes.

28.95/1.140

F810

1148A IH

1.990/0.0783 .020/.0008 .086/.0034

23.00/0.906

F810

1147A IH

56.980/2.2433 61.000/2.4016 1.990/0.0783 .020/.0008 57.000/2.2441 61.020/2.4024 .086/.0034 Overflange length remains constant for standard and undersizes.

28.95/1.140

F810

1148A IH

19.25/0.758

F830

SH1465

16.00/0.630

F830

SH1466

Std. .25 .50 .75 1.0

5M1144

1,2,4,5

56.980/2.2433 57.000/2.2441

61.000/2.4016 61.020/2.4024

3 (Fl)

Main - full groove bearing set. 1,2,4,5 56.980/2.2433 61.000/2.4016 Std. .25 .50 .75 1.0 57.000/2.2441 61.020/2.4024

5M1147

3 (Fl)

3BS8385 Std.

5SC761 Std.

Balance Shaft RHF 38.974/1.5344 (Max.) RHR, 35.977/1.4164 LHR (Max.)

1.506/0.0593 .020/.0008 .076/.0030 1.496/0.0589 .043/.0017 .099/.0039

42.024/1.6545 (Max.) 39.025/1.5364 (Max.)

33.924/1.3356 33.950/1.3366 33.924/1.3356 33.950/1.3366

38.014/1.4966 38.038/1.4976 38.014/1.4966 38.038/1.4976

2.006/0.0790 .041/.0016 .104/.0041 2.006/0.0790 .041/.0016 .104/.0041

ENGINE

VIN CYL

Bore x Stroke

1795cc (1.8) G62B 1795cc (1.8) G62B Turbo

4 G

80.6mm x 88mm 80.6mm x 88mm

L4 L4

20.14/0.793

F23

20.14/0.793

F23

SC762 U/L SC761 U SC760 L

TORQUE SETTINGS Connecting Rod 23-25 ft.lbs/31-34 Nm Main Bearing 36-40 ft.lbs/49-54 Nm

Rod

4B1146 Std. .25 .50 .75 1.0

44.991/1.7713 45.000/1.7717

48.000/1.8898 48.020/1.8905

1.494/0.0588 .012/.0005 .067/.0026

374

23.50/0.925

F810

1146A IH

MITSUBISHI Type and Location

Standard Shaft Size

Max. Bearing Thickness

Housing Bore

Vertical Oil Clearance

Max. Overall Length

Material Code

Qty. Set

Bearing Shell No.

Engine Set No. Sizes Available

(Contâ&#x20AC;&#x2122;d.) Main - half groove bearing set. 1,2,4,5 56.980/2.2433 61.000/2.4016 57.000/2.2441 61.020/2.4024

1.990/0.0783 .020/.0008 .086/.0034

23.01/0.906

1.990/0.0783 .020/.0008 .086/.0034

23.01/0.906

F810

1144A L

56.980/2.2433 61.000/2.4016 1.990/0.0783 .020/.0008 57.000/2.2441 61.020/2.4024 .086/.0034 Overflange length remains constant for standard and undersizes.

28.95/1.140

F810

1148A IH

1.990/0.0783 .020/.0008 .086/.0034

23.00/0.906

F810

1147A IH

3 (Fl)

56.980/2.2433 61.000/2.4016 1.990/0.0783 .020/.0008 57.000/2.2441 61.020/2.4024 .086/.0034 Overflange length remains constant for standard and undersizes.

28.95/1.140

F810

1148A IH

Balance Shaft - for engines from 1983 - 7/85. RHF 41.976/1.6526 45.024/1.7726 1.505/0.0593 .025/.0010 (Max.) (Max.) .079/.0031

19.00/0.748

F818

8387

21.00/0.827

F818

8388

Balance Shaft - for engines from 8/85 - 1988. 41.976/1.6526 45.024/1.7726 1.505/0.0593 .025/.0010 RHF (Max.) (Max.) .079/.0031

19.00/0.748

F818

8387

LHR

21.00/0.827

F818

8388

21.00/0.827

F818

8389

1,2,4,5

56.980/2.2433 57.000/2.2441

61.000/2.4016 61.020/2.4024

3 (Fl)

Main - full groove bearing set. 1,2,4,5 56.980/2.2433 61.000/2.4016 57.000/2.2441 61.020/2.4024

RHR, LHR

RHR

40.967/1.6129 (Max.)

40.967/1.6129 (Max.) 40.967/1.6129 (Max.)

44.025/1.7333 (Max.)

44.025/1.7333 (Max.) 44.025/1.7333 (Max.)

1.495/0.0589 .025/.0010 .079/.0031

1.495/0.0589 .025/.0010 .079/.0031 1.495/0.0589 .025/.0010 .079/.0031

ENGINE

VIN CYL

Bore x Stroke

112 1834cc (1.8) 4G93 112 1834cc (1.8) (4G93) 112 1834cc (1.8) (4G93)

81mm x 89mm 81mm x 89mm 81mm x 89mm

L4 L4 L4

F810

1147A U

5M1144 Std. .25 .50 .75 1.0

5M1147 Std. .25 .50 .75 1.0

3BS8387 Std.

3BS8389 Std. .25 .50

TORQUE SETTINGS

Connecting Rod 15 ft.lbs/20 Nm + 1/4 turn Main Bearing 18 ft.lbs/25 Nm + 1/4 turn Tighten main bearing caps from center, working towards end caps.

Rod 44.980/1.7709 48.000/1.8898 1.492/0.0587 .016/.0006 45.000/1.7717 48.015/1.8904 .077/.0030 To be superceded by 4B8036A when stock exhausted. Rod - High Strength Aluminum Silicon material. 44.980/1.7709 48.000/1.8898 1.492/0.0587 .016/.0006 45.000/1.7717 48.015/1.8904 .077/.0030 Main 1-5

49.982/1.9678 54.000/2.1260 1.991/0.0784 .018/.0007 50.000/1.9685 54.018/2.1267 .080/.0031 To be superceded by 5M8037A when stock exhausted. Main - High Strength Aluminum Silicon material. 1-5 49.982/1.9678 54.000/2.1260 1.991/0.0784 .018/.0007 50.000/1.9685 54.018/2.1267 .080/.0031 Thrust 3

56.000/2.2047 75.400/2.9685 56.250/2.2146 75.700/2.9803 Set includes 2 pieces, use on number 3 position. Required with 5M8037.

16.80/0.661

19.13/0.753

1.98/0.078

375

F780

F810

F780

F810

F817

4B8036

8036 IH

Std. .25 .50 .75 1.0

8036A IH

Std. .25 .50 .75 1.0

8037 U/L

Std. .25 .50

8037A U/L

Std. .25 .50 .75 1.0

8037T IH

4B8036A

5M8037

5M8037A

1T8037 Std.

MITSUBISHI Engine Set No. Sizes Available

Type and Location

Standard Shaft Size

ENGINE

Housing Bore

VIN CYL

1855cc (1.9) 4G51/G51B 143 2346cc (2.3) 4D55 (SOHC) Turbo Diesel 143 2346cc (2.3) 4D55 (SOHC) Turbo Diesel 2476cc (2.5) 4D56 (SOHC) Diesel

Max. Bearing Thickness

Vertical Oil Clearance

Bore x Stroke

81mm x 90mm

91.1mm x 90mm

L4 L4

91.1mm x 90mm 91.1mm x 95mm

Max. Overall Length

Material Code

Qty. Set

Bearing Shell No.

TORQUE SETTINGS Connecting Rod 32-35 ft.lbs/44-47 Nm Main Bearing 55-61 ft.lbs/74-83 Nm

Rod

4B1136

52.973/2.0855 53.000/2.0866

Std. .25 .50 .75 1.0

56.007/2.2050 56.021/2.2055

1.493/0.0588 .021/.0008 .076/.0030

Main - for engines with 66mm/2.5984" main journal diameter only. 1,2,4,5 65.979/2.5976 70.000/2.7559 1.990/0.0783 .012/.0005 Std. .25 .50 .75 1.0 66.000/2.5984 70.021/2.7567 .078/.0031 3 (Fl) 65.979/2.5976 70.000/2.7559 1.990/0.0783 .012/.0005 66.000/2.5984 70.021/2.7567 .078/.0031 Overflange length remains constant for standard and undersizes.

5M1137

3BS8288 Std. .25

Balance Shaft 43.009/1.6933 2,3 43.025/1.6939 1

RB4091

22.959/0.9039 22.980/0.9047

25.13/0.989

F820

1136AL IH

25.13/0.989

F780

30.95/1.219

F780

1137 U/L 1138 IH

46.030/1.8122 46.050/1.8130

1.478/0.0582

20.24/0.797

F818

8288

26.000/1.0236 26.021/1.0244

1.505/0.0593

18.00/0.709

F818

8289

31.90/1.256

F100

RB4091

Small End - Not bored, 4D55/4D56 engines only. 29.000/1.1417 32.000/1.2598

Semi

ENGINE

VIN CYL

Bore x Stroke

122 1997cc (2.0) SOHC (G63B) 122 1997cc (2.0) DOHC (4G63) 122 1997cc (2.0) SOHC (G63B) 122 1997cc (2.0) DOHC (4G63) 122 1997cc (2.0) DOHC (4G63) Turbo 122 1997cc (2.0) DOHC (4G63) 122 1997cc (2.0) DOHC (4G63) Turbo 122 1997cc (2.0) SOHC (4G63) 122 1997cc (2.0) DOHC (4G63) Turbo 122 1997cc (2.0) DOHC (4G63T) Turbo

5 D D E

L4 L4 L4 L4

85mm x 88mm 85mm x 88mm 85mm x 88mm 85mm x 88mm

F R

L4 L4

85mm x 88mm 85mm x 88mm

U V

L4 L4

85mm x 88mm 85mm x 88mm

85mm x 88mm

4B1146 Std. .25 .50 .75 1.0

4B1185 Std. .25 .50 .75 1.0

TORQUE SETTINGS Connecting Rod 14 ft.lbs + 90 deg. (1993-99 only) Connecting Rod 23-25 ft.lbs/31-34 Nm (1983-88 only) Connecting Rod 36-39 ft.lbs/49-53 Nm (1989-92 only) Main Bearing 37-39 ft.lbs/50-53 Nm (SOHC engines) Main Bearing 47-51 ft.lbs/64-69 Nm (DOHC engines)

Rod - For engines to 1983-5/92 only. 44.991/1.7713 48.000/1.8898 45.000/1.7717 48.020/1.8905

1.494/0.0588 .012/.0005 .067/.0026

23.50/0.925

F810

1146A IH

Rod - For engines from 6/92-on. 44.981/1.7709 47.998/1.8897 44.996/1.7715 48.019/1.8905

1.493/0.0588 .016/.0006 .078/.0031

21.10/0.831

F810

1185A IH

23.01/0.906

F810

23.01/0.906

F810

28.95/1.140

F810

1147A U 1144A L 1148A IH

23.00/0.906

F810

1147A IH

28.95/1.140

F810

1148A IH

Main - for engines 1983-5/92 only - half groove. 1,2,4,5 56.980/2.2433 61.000/2.4016 1.990/0.0783 Std. .25 .50 .75 1.0 57.000/2.2441 61.020/2.4024 1,2,4,5 56.980/2.2433 61.000/2.4016 1.990/0.0783 57.000/2.2441 61.020/2.4024 3 (Fl) 56.980/2.2433 61.000/2.4016 1.990/0.0783 57.000/2.2441 61.020/2.4024 Overflange length remains constant for standard and undersizes.

5M1144

.020/.0008 .086/.0034 .020/.0008 .086/.0034 .020/.0008 .086/.0034

Main - for engines 1983-5/92 only - full groove. 1,2,4,5 56.980/2.2433 61.000/2.4016 1.990/0.0783 .020/.0008 Std. .25 .50 .75 1.0 57.000/2.2441 61.020/2.4024 .086/.0034

5M1147

3 (Fl)

56.980/2.2433 61.000/2.4016 1.990/0.0783 .020/.0008 57.000/2.2441 61.020/2.4024 .086/.0034 Overflange length remains constant for standard and undersizes.

376