Sherex Rivet Nuts Catalog by Mudge Fasteners, Inc.

RIVET NUT INSERT

ISO/TS 16949:2002 CERTIFIED

TABLE OF CONTENTS

PAGE 2

Imperial/Inch Body Style Rivet Nuts

PAGE 3

CAL Large Flange Knurled Body Thin Wall Series

PAGE 4

CAK Small Flange Knurled Body Thin Wall Series

PAGE 5

CAH Half Hex Body Large Flange Thin Wall Series

PAGE 6

CA Heavy Duty Rivet Nut Flat Head Series

PAGE 7

CAO Small Flange Smooth Body Thin Wall Series

PAGE 8

CFW/CAW Diamond Knurled 3600 Swaging Series

PAGE 9

CFT/CAT Knurled 3600 Swaging Series

PAGE 10

CPB Prebulbed Slotted Body Series

PAGE 11

CPN Straight Shank Slotted Body Series

PAGE 12

CFH & CFHD Full Hex Body Series

PAGE 14

Metric Body Style Rivet Nuts

PAGE 15

UPO Large Flange European Series

PAGE 16

UFO Countersunk Head European Series

PAGE 17

UKO Small Flange European Series

PAGE 18

HUPO & HUKO Large and Small Flange Hexagonal European Series

TABLE OF CONTENTS

PAGE 19

UPO RS & UFO RS Large and Countersunk Knurled European Series

PAGE 20

UKO & HUKO Imperial Thread Series - Stainless Steel

PAGE 21

CLM & CKM Large & Small Flange Knurled Metric Body Series

PAGE 22

Sherex CR/CRE Series

PAGE 23

Sherex Locsert速

PAGE 23

Sherex Seal 2 Sealing System

PAGE 24-25 RIV-FLOAT速 PAGE 26

Hand Tools

PAGE 27

Pneumatic Spin - Spin Tools

PAGE 28

Hydro-Pneumatic Spin - Pull Tools

PAGE 29

Socket Head Cap Screw

PAGE 30

Validation Capability

PAGE 31

Testing Methods

PAGE 32-33 Sherex Product Showcase PAGE 34

Engineering Guide

PAGE 35

Sherex Decimal Equivalents & Drill Size Chart

PAGE 36

Additional Sherex Services

IMPERIAL/ INCH BODY STYLE Rivet Nuts

IMPERIAL/INCH BODY STYLE RIVET NUTS

• Imperial/Inch body styles are designed to be placed in fractional or common inch drill/punch hole sizes. • The most common styles used in the American marketplace. • Most of the inch/imperial body styles are available with metric threads. • All parts are manufactured by Sherex Taiwan, our ISO/TS 16949 certified production facility. • Special designs are available to meet customer specific requirements. Contact Sherex with your application information.

Phone: 866-474-3739 I Fax: 716-875-0358 I www.sherex.com I E-mail: info@sherex.com

CAL LARGE FLANGE KNURLED BODY THIN WALL SERIES OPEN END

Part Number (Steel) CAL2-0632-080 CAL2-0632-130 unified CAL2-0832-080 CAL2-0832-130 Part Number CAL2-1024-130 (Steel) CAL2-1024-225 CAL2-0632-080 CAL2-1032-130 CAL2-0632-130 CAL2-1032-225 CAL2-0832-080 CAL2-2520-165 CAL2-0832-130 CAL-2-2520-260 CAL2-1024-130 CAL2-2528-165 CAL2-1024-225 CAL2-2528-260 CAL2-1032-130 CAL2-3118-150 CAL2-1032-225 CAL2-3118-312 CAL2-2520-165 CAL2-3124-150 CAL-2-2520-260 CAL2-3124-312 CAL2-2528-165 CAL2-3716-150 CAL2-2528-260 CAL2-3716-312 CAL2-3118-150 CAL2-3724-150 CAL2-3118-312 CAL2-3724-312 CAL2-3124-150 CAL2-5013-200 CAL2-3124-312 CAL2-5013-350 CAL2-3716-150 CAL2-3716-312 CAL2-3724-150 CAL2-3724-312 CAL2-5013-200 CAL2-5013-350

Thread Size

Grip Range Min. Max. 6-32 UNC .020 .080 6-32 UNC .080 .130 thread unit 8-32 UNC .020 .080 8-32 UNC .080 .130 Thread Size Grip 10-24 UNC .020 Range .130 Min. Max. 10-24 UNC .130 .225 6-32 UNC .020 .080 10-32 UNF .020 .130 6-32 UNC .080 .130 10-32 UNF .130 .225 8-32 UNC .020 .080 1/4-20 UNC .027 .165 8-32 UNC .080 .130 1/4-20 UNC .165 .260 10-24 .020 .130 1/4-28UNC UNF .027 .165 10-24 .130 .225 1/4-28UNC UNF .165 .260 10-32 UNF .020 .130 5/16-18 UNC .027 .150 10-32 UNF .130 .225 5/16-18 UNC .150 .312 1/4-20 UNC .027 .165 5/16-24 UNF .027 .150 1/4-20 UNC .165 .260 5/16-24 UNF .150 .312 1/4-28 .027 .165 3/8-16 UNF UNC .027 .150 1/4-28 .165 .260 3/8-16 UNF UNC .150 .312 5/16-18 UNC .027 .150 3/8-24 UNF .027 .150 5/16-18 UNC .150 .312 3/8-24 UNF .150 .312 5/16-24 UNF .027 .150 1/2-13 UNC .063 .200 5/16-24 UNF .150 .312 1/2-13 UNC .200 .350 3/8-16 UNC .027 .150 3/8-16 UNC .150 .312 3/8-24 UNF .027 .150 3/8-24 UNF .150 .312 1/2-13 UNC .063 .200 1/2-13 UNC .200 .350

(

metric thread

L HD ± .015 ±.010 ±.025* .420 .390 .470 .390 inches .420 .390 .470 .390 L HD .475 .415 ±.585 .015 ±.010.415 ±.025* .420 .390 .475 .415 .470 .390 .585 .415 .420 .390 .580 .500 .470 .390 .680 .500 .475 .415 .580 .500 .585 .415 .680 .500 .475 .415 .690 .685* .585 .415 .805 .685* .580 .500 .690 .685* .680 .500 .805 .685* .580 .500 .690 .685* .680 .500 .805 .685* .690 .685* .690 .685* .805 .685* .805 .685* .690 .685* 1.150 .865* .805 .685* 1.300 .865* .690 .685* .805 .685* .690 .685* .805 .685* 1.150 .865* 1.300 .865*

(unit -

)

Stainless Steel 302* Aluminum 5056

Finish: Zinc Plated-Yellow Dichromate per ASTM B633 Fe/Zn 8, Type II

RoHS Compliant: Zinc Plated-Clear Trivalent Chromate per Sherex SFS-01-001

D Max. .265 .265 .265 .265 D .296 Max. .296 .265 .296 .265 .296 .265 .390 .265 .390 .296 .390 .296 .390 .296 .530 .296 .530 .390 .530 .390 .530 .390 .530 .390 .530 .530 .530 .530 .530 .530 .685 .530 .685 .530 .530 .530 .530 .685 .685

IL Max. .305 .305 .305 .305 IL .315 Max. .315 .305 .315 .305 .315 .305 .380 .305 .380 .315 .380 .315 .380 .315 .470 .315 .425 .380 .470 .380 .425 .380 .470 .380 .425 .470 .470 .425 .425 .470 .850 .425 .850 .470 .425 .470 .425 .850 .850

LB ± .015 .740 .740 .740 .740 LB .990 ±.990 .015 .740 .990 .740 .990 .740 1.190 .740 1.190 .990 1.190 .990 1.190 .990 1.390 .990 1.390 1.190 1.390 1.190 1.390 1.190 1.390 1.190 1.390 1.390 1.390 1.390 1.390 1.390 2.365 1.390 2.365 1.390 1.390 1.390 1.390 2.365 2.365

ILB Max. .640 .580 .640 .580 ILB .845 Max. .735 .640 .845 .580 .735 .640 1.005 .580 .905 .845 1.005 .735 .905 .845 1.175 .735 1.025 1.005 1.175 .905 1.025 1.005 1.175 .905 1.025 1.175 1.175 1.025 1.025 1.175 2.070 1.025 1.920 1.175 1.025 1.175 1.025 2.070 1.920

ITD Ref. .610 .670 .610 .670 ITD .730 Ref. .840 .610 .730 .670 .840 .610 .895 .670 1.035 .730 .895 .840 1.035 .730 .995 .840 1.120 .895 .995 1.035 1.120 .895 .995 1.035 1.120 .995 .995 1.120 1.120 .995 1.505 1.120 1.505 .995 1.120 .995 1.120 1.505 1.505

Hole Size +.006/-.000 .266 .266 .266 .266 Hole Size .297 +.006/-.000 .297 .266 .297 .266 .297 .266 .391 .266 .391 .297 .391 .297 .391 .297 .531 .297 .531 .391 .531 .391 .531 .391 .531 .391 .531 .531 .531 .531 .531 .531 .688 .531 .688 .531 .531 .531 .531 .688 .688

millimeters)

Part Number Thread Size Grip Range L HD (Steel) Min. Max. ± .38 ±.25 ±.64* CAL2-470-2.0 M4x0.7 ISO 0.50 2.00 10.68 9.91 CAL2-470-3.3 M4x0.7 ISO 2.00 3.30 11.94 9.91 CAL2-580-3.3 M5x0.8 ISO 0.50 3.30 12.07 10.54 CAL2-580-5.7 M5x0.8 ISO 3.30 5.70 14.86 10.54 Part Number Thread Grip L HD CAL2-610-4.2 M6x1.0Size ISO 0.70 Range 4.20 14.73 12.70 (Steel) Min. Max. ± .38 ±.25 ±.64* CAL2-610-6.6 M6x1.0 ISO 4.20 6.60 17.27 12.70 CAL2-470-2.0 M4x0.7 ISO 0.50 2.00 10.68 9.91 CAL2-8125-3.8 M8x1.25 ISO 0.70 3.80 17.53 17.40* CAL2-470-3.3 M4x0.7 ISO 2.00 3.30 11.94 9.91 CAL2-8125-7.9 M8x1.25 ISO 3.80 7.90 20.45 17.40* CAL2-580-3.3 M5x0.8 ISO 0.50 3.30 12.07 10.54 CAL2-1015-3.8 M10x1.5 ISO 0.70 3.80 17.53 17.40* CAL2-580-5.7 M5x0.8 ISO 3.30 5.70 14.86 10.54 CAL2-1015-7.9 M10x1.5 ISO 3.80 7.90 20.45 17.40* CAL2-610-4.2 M6x1.0 ISO 4.20 14.73 12.70 CAL2-12175-5.1 M12x1.75 ISO 0.70 1.60 5.10 29.21 21.97* CAL2-610-6.6 M6x1.0 ISO 6.60 17.27 12.70 CAL2-12175-8.9 M12x1.75 ISO 4.20 5.10 8.90 33.02 21.97* CAL2-8125-3.8 M8x1.25 ISO 0.70 3.80 17.53 17.40* CAL2-8125-7.9 M8x1.25 ISO 3.80 7.90 20.45 17.40* part numbering CAL2-1015-3.8 M10x1.5 ISO 0.70 system 3.80 17.53 17.40* CAL2-1015-7.9 M10x1.5 ISO 3.80 7.90 20.45 17.40* CAL Specifications Number 21.97* CAL2-12175-5.1 M12x1.75 ISO 1.60 5.10Part 29.21 Material: Steel 1008/1010 CAL2-12175-8.9 M12x1.75 ISO 5.10 8.90Example: 33.02 CAL2-2520-165 21.97*

HT ± .003 .030 .030 .030 .030 HT .030 ±.030 .003 .030 .030 .030 .030 .030 .030 .030 .030 .030 .030 .030 .030 .030 .035 .030 .035 .030 .035 .030 .035 .030 .035 .030 .035 .035 .035 .035 .035 .035 .047 .035 .047 .035 .035 .035 .035 .047 .047

CAL Product Style Large Flange Knurled Body Thin Wall Series

HT ± .08 0.76 0.76 0.76 0.76 HT 0.76 ±0.76 .08 0.76 0.89 0.76 0.89 0.76 0.89 0.76 0.89 0.76 1.19 0.76 1.19 0.89 0.89 0.89 0.89 1.19 1.19

2 Material 1-Stainless Steel 2-Steel 3-Aluminum 4-Monel 5-Brass

CAL

series

CLOSED END

• The CAL series has a large flange to provide increased strength in punched and drilled holes. • Knurled body provides a higher resistance to spin out when installed in soft materials.

CLOSED END D Max. 6.73 6.73 7.52 7.52 D 9.91 Max. 9.91 6.73 13.46 6.73 13.46 7.52 13.46 7.52 13.46 9.91 17.40 9.91 17.40 13.46 13.46 13.46 13.46 17.40 17.40

IL Max. 7.75 7.75 8.00 8.00 IL 9.65 Max. 9.65 7.75 11.94 7.75 10.80 8.00 11.94 8.00 10.80 9.65 21.59 9.65 21.59 11.94 10.80 11.94 10.80 21.59 21.59

2520 Thread Size

LB ± .38 18.80 18.80 25.15 25.15 LB 30.23 ± .38 30.23 18.80 35.31 18.80 35.31 25.15 35.31 25.15 35.31 30.23 60.07 30.23 60.07 35.31 35.31 35.31 35.31 60.07 60.07

ILB Max. 16.26 14.73 21.46 18.67 ILB 25.53 Max. 22.99 16.26 29.85 14.73 26.04 21.46 29.85 18.67 26.04 25.53 52.58 22.99 48.77 29.85 26.04 29.85 26.04 52.58 48.77

165 Grip Range

ITD Ref. 15.49 17.02 18.54 21.34 ITD 22.73 Ref. 26.29 15.49 25.27 17.02 28.45 18.54 25.27 21.34 28.45 22.73 38.23 26.29 38.23 25.27 28.45 25.27 28.45 38.23 38.23

Hole Size +.15/-.000 6.76 6.75 7.60 7.60 Hole Size 10.00 +.15/-.000 10.00 6.76 13.50 6.75 13.50 7.60 13.50 7.60 13.50 10.00 17.45 10.00 17.45 13.50 13.50 13.50 13.50 17.45 17.45

WEDGE HEAD

(_) Empty-Open End B-Closed End T-Trivalent W-Wedge Head S-Sealed

Special finish or material available upon request

SEALED HEAD

*Contact Sherex for exact product dimensions in Stainless Steel. Grip range can be affected by parent material and hole size. Sherex recommends trial installations to determine the proper grip range for the application. Contact Sherex for details. CAL style rivet nuts are available in sealed, closed end, and wedge head designs by special order. Other specials available upon request. Contact Sherex for test data. INSTALLATION TOOLING CAL Series can be installed with our Hand Tools, Pneumatic Tools, and Hydro-Pneumatic Tools. For additional tooling information see pages 26-28. Sherex rivet nuts are compatible with the following hardware: GRADE 2, GRADE 5, CLASS 8.8 and CLASS 9.8 Please contact Sherex when using other grade fasteners.

Phone: 866-474-3739 I Fax: 716-875-0358 I www.sherex.com I E-mail: info@sherex.com

CAK

CAK SMALL FLANGE KNURLED BODY THIN WALL SERIES

series

• The CAK series has a small flange for a near flush installation. • Knurled body provides a higher resistance to spin out when installed in soft materials.

CLOSED END

OPEN END

Part Number (Steel) unified CAK2-0632-080 CAK2-0632-130 Part Number CAK2-0832-080 (Steel) CAK2-0832-130 CAK2-1024-130 CAK2-0632-080 CAK2-1024-225 CAK2-0632-130 CAK2-1032-130 CAK2-0832-080 CAK2-1032-225 CAK2-0832-130 CAK2-2520-165 CAK2-1024-130 CAK2-2520-260 CAK2-1024-225 CAK2-2528-165 CAK2-1032-130 CAK2-2528-260 CAK2-1032-225 CAK2-3118-150 CAK2-2520-165 CAK2-3118-312 CAK2-2520-260 CAK2-3124-150 CAK2-2528-165 CAK2-3124-312 CAK2-2528-260 CAK2-3716-150 CAK2-3118-150 CAK2-3716-312 CAK2-3118-312 CAK2-3724-150 CAK2-3124-150 CAK2-3724-312 CAK2-3124-312 CAK2-3716-150 CAK2-3716-312 CAK2-3724-150 CAK2-3724-312

CLOSED END

Grip Range L HD Min. Max. ± .015 ±.010 ±.015* thread unit inches 6-32 UNC .020 .080 .420 .310 6-32 UNC .080 .130 .470 .310 Thread Size Grip L HD 8-32 UNC .020 Range .080 .420 .310 Min. .015 ±.010.310 ±.015* 8-32 UNC .080 Max. .130 ±.470 10-24 UNC .020 .080 .130 .475 .340 6-32 UNC .020 .420 .310 10-24 UNC .130 .130 .225 .585 .340 6-32 UNC .080 .470 .310 10-32 UNF .020 .080 .130 .475 .340 8-32 UNC .020 .420 .310 10-32 UNF .130 .130 .225 .585 .340 8-32 UNC .080 .470 .310 1/4-20 UNC .020 .027 .130 .165 .580 .455 10-24 UNC .475 .340 1/4-20 UNC .130 .165 .225 .260 .680 .455 10-24 UNC .585 .340 1/4-28 UNF .020 .027 .130 .165 .580 .455 10-32 UNF .475 .340 1/4-28 UNF .130 .165 .225 .260 .680 .455 10-32 UNF .585 .340 5/16-18 UNC .027 .027 .165 .150 .690 .595* 1/4-20 UNC .580 .455 5/16-18 UNC .165 .150 .260 .312 .805 .595* 1/4-20 UNC .680 .455 5/16-24 UNF .027 .027 .165 .150 .690 .595* 1/4-28 UNF .580 .455 5/16-24 UNF .165 .150 .260 .312 .805 .595* 1/4-28 UNF .680 .455 3/8-16 UNC .027 .150 .150 .690 .595* 5/16-18 UNC .027 .690 .595* 3/8-16 UNC .150 .312 .312 .805 .595* 5/16-18 UNC .150 .805 .595* 3/8-24 UNF .027 .150 .150 .690 .595* 5/16-24 UNF .027 .690 .595* 3/8-24 UNF .150 .312 .312 .805 .595* 5/16-24 UNF .150 .805 .595* 3/8-16 UNC .027 .150 .690 .595* 3/8-16 UNC .150 .312 .805 .595* 3/8-24 UNF .027 .150 .690 .595* 3/8-24 UNF .150 .312 .805 .595* Thread Size

(

metric thread

(unit -

)

D Max. .265 .265 D .265 Max. .265 .296 .265 .296 .265 .296 .265 .296 .265 .390 .296 .390 .296 .390 .296 .390 .296 .530 .390 .530 .390 .530 .390 .530 .390 .530 .530 .530 .530 .530 .530 .530 .530 .530 .530 .530 .530

IL Max. .305 .305 IL .305 Max. .305 .315 .305 .315 .305 .315 .305 .315 .305 .380 .315 .380 .315 .380 .315 .380 .315 .470 .380 .425 .380 .470 .380 .425 .380 .470 .470 .425 .425 .470 .470 .425 .425 .470 .425 .470 .425

LB ± .015 .740 .740 LB .740 ±.740 .015 .990 .740 .990 .740 .990 .740 .990 .740 1.190 .990 1.190 .990 1.190 .990 1.190 .990 1.390 1.190 1.390 1.190 1.390 1.190 1.390 1.190 1.390 1.390 1.390 1.390 1.390 1.390 1.390 1.390 1.390 1.390 1.390 1.390

ILB Max. .640 .580 ILB .640 Max. .580 .845 .640 .735 .580 .845 .640 .735 .580 1.005 .845 .905 .735 1.005 .845 .905 .735 1.175 1.005 1.025 .905 1.175 1.005 1.025 .905 1.175 1.175 1.025 1.025 1.175 1.175 1.025 1.025 1.175 1.025 1.175 1.025

ITD Ref. .610 .670 ITD .610 Ref. .670 .730 .610 .840 .670 .730 .610 .840 .670 .895 .730 1.035 .840 .895 .730 1.035 .840 .995 .895 1.120 1.035 .995 .895 1.120 1.035 .995 .995 1.120 1.120 .995 .995 1.120 1.120 .995 1.120 .995 1.120

Hole Size +.006/-.000 .266 .266 Hole Size .266 +.006/-.000 .266 .297 .266 .297 .266 .297 .266 .297 .266 .391 .297 .391 .297 .391 .297 .391 .297 .531 .391 .531 .391 .531 .391 .531 .391 .531 .531 .531 .531 .531 .531 .531 .531 .531 .531 .531 .531

D Max. 6.73 6.73 D 7.52 Max. 7.52 9.91 6.73 9.91 6.73 13.46 7.52 13.46 7.52 13.46 9.91 13.46 9.91 13.46 13.46 13.46 13.46

IL Max. 7.75 7.75 IL 8.00 Max. 8.00 9.65 7.75 9.65 7.75 11.94 8.00 10.80 8.00 11.94 9.65 10.80 9.65 11.94 10.80 11.94 10.80

LB ± .38 18.80 18.80 LB 25.15 ± .38 25.15 30.23 18.80 30.23 18.80 35.31 25.15 35.31 25.15 35.31 30.23 35.31 30.23 35.31 35.31 35.31 35.31

ILB Max. 16.26 14.73 ILB 21.46 Max. 18.67 25.53 16.26 22.99 14.73 29.85 21.46 26.04 18.67 29.85 25.53 26.04 22.99 29.85 26.04 29.85 26.04

ITD Ref. 15.49 17.02 ITD 18.54 Ref. 21.34 22.73 15.49 26.29 17.02 25.27 18.54 28.45 21.34 25.27 22.73 28.45 26.29 25.27 28.45 25.27 28.45

Hole Size +.15/-.000 6.75 6.75 Hole Size 7.60 +.15/-.000 7.60 10.00 6.75 10.00 6.75 13.50 7.60 13.50 7.60 13.50 10.00 13.50 10.00 13.50 13.50 13.50 13.50

millimeters)

Part Number Thread Size Grip Range L (Steel) Min. Max. ± .38 CAK2-470-2.0 M4x0.7 ISO 0.50 2.00 10.67 CAK2-470-3.3 M4x0.7 ISO 2.00 3.30 11.94 Part Number Thread L CAK2-580-3.3 M5x0.8 Size ISO Grip 0.50 Range 3.30 12.07 (Steel) .38 CAK2-580-5.7 M5x0.8 ISO Min. 3.30 Max. 5.70 ± 14.86 CAK2-610-4.2 M6x1.0 ISO ISO 0.50 0.70 2.00 4.20 10.67 14.73 CAK2-470-2.0 M4x0.7 CAK2-610-6.6 M6x1.0 ISO ISO 2.00 4.20 3.30 6.60 11.94 17.27 CAK2-470-3.3 M4x0.7 CAK2-8125-3.8 M8x1.25 ISO 0.50 0.70 3.30 3.80 12.07 17.53 CAK2-580-3.3 M5x0.8 ISO CAK2-8125-7.9 M8x1.25 ISO 3.30 3.80 5.70 7.90 14.86 20.45 CAK2-580-5.7 M5x0.8 ISO CAK2-1015-3.8 M10x1.5 ISO 0.70 0.70 4.20 3.80 14.73 17.53 CAK2-610-4.2 M6x1.0 ISO CAK2-1015-7.9 M10x1.5 ISO 4.20 3.80 6.60 7.90 20.45 CAK2-610-6.6 M6x1.0 ISO 17.27 CAK2-8125-3.8 M8x1.25 ISO 0.70 3.80 17.53 CAK2-8125-7.9 M8x1.25 ISO 3.80 7.90 20.45 CAK2-1015-3.8 M10x1.5 ISO 0.70 3.80 17.53 part numbering system CAK2-1015-7.9 M10x1.5 ISO 3.80 7.90 20.45

CAK Specifications Material: Steel 1008/1010 Stainless Steel 302* Aluminum 5056

HT ± .002 .019 .019 HT .019 ±.019 .002 .019 .019 .019 .019 .019 .019 .019 .019 .022 .019 .022 .019 .022 .019 .022 .019 .022 .022 .022 .022 .022 .022 .022 .022 .022 .022 .022 .022 .022 .022 .022 .022 .022 .022 .022 .022

HD ±.25 ±.38* 7.87 7.87 HD 8.64 ±.258.64 ±.38* 11.56 7.87 11.56 7.87 15.11* 8.64 15.11* 8.64 15.11* 11.56 15.11* 11.56 15.11* 15.11* 15.11* 15.11*

HT ± .05 0.48 0.48 HT 0.48 ±0.48 .05 0.55 0.48 0.55 0.48 0.55 0.48 0.55 0.48 0.55 0.55 0.55 0.55 0.55 0.55 0.55 0.55

Part Number Example: CAK2-2520-165

CAK Product Style Finish: Zinc Plated-Yellow Dichromate Small Flange per ASTM B633 Fe/Zn 8, Type II Knurled Body Thin Wall Series RoHS Compliant: Zinc Plated-Clear Trivalent Chromate per Sherex SFS-01-001

2 Material 1-Stainless Steel 2-Steel 3-Aluminum 4-Monel 5-Brass

2520 Thread Size

165 Grip Range

(_) Empty-Open End B-Closed End T-Trivalent

Special finish or material available upon request

*Contact Sherex for exact product dimensions in Stainless Steel. Grip range can be affected by parent material and hole size. Sherex recommends trial installations to determine the proper grip range for the application. Contact Sherex for details. CAK style rivet nuts are available in closed end designs. Other specials available upon request. Contact Sherex for test data. INSTALLATION TOOLING CAK Series can be installed with our Hand Tools, Pneumatic Tools, and Hydro-Pneumatic Tools. For additional tooling information see pages 26-28.

Sherex rivet nuts are compatible with the following hardware: GRADE 2, GRADE 5, CLASS 8.8 and CLASS 9.8 Please contact Sherex when using other grade fasteners.

Phone: 866-474-3739 I Fax: 716-875-0358 I www.sherex.com I E-mail: info@sherex.com

CAH HALF HEX BODY LARGE FLANGE THIN WALL SERIES OPEN END

Part Number Thread Size Grip Range L HD (Steel) Min. Max. ± .015 ±.010 ±.025* CAH2-0632-080 6-32 UNC .020 .080 .385 .375 CAH2-0632-130 6-32 UNC .080 .130 .435 .375 CAH2-0832-080 8-32 UNC .020 .080 .385 .375 unified inches CAH2-0832-130 thread 8-32 UNC .080unit .130 .435 .375 CAH2-1024-130 10-24 UNC .020 .130 .435 .390 Part Number Thread Size Grip L HD CAH2-1024-225 10-24 UNC .130 Range .225 .535 .390 (Steel) Min. .130 Max. ±.435 .015 ±.010 ±.025* CAH2-1032-130 10-32 UNF .020 .390 CAH2-0632-080 6-32 UNC .020 .225 .080 .385 .375 CAH2-1032-225 10-32 UNF .130 .535 .390 CAH2-0632-130 6-32 UNC .080 .165 .130 .435 .375 CAH2-2520-165 1/4-20 UNC .027 .585 .510 CAH2-0832-080 8-32 UNC .020 .260 .080 .385 .375 CAH2-2520-260 1/4-20 UNC .165 .685 .510 CAH2-0832-130 8-32 UNC .080 .165 .130 .435 .375 CAH2-2528-165 1/4-28 UNF .027 .585 .510 CAH2-1024-130 10-24 UNC .020 .260 .130 .435 .390 CAH2-2528-260 1/4-28 UNF .165 .685 .510 CAH2-1024-225 5/16-18 10-24 UNC .130 .150 .225 .535 .390 CAH2-3118-150 UNC .027 .685 .655* CAH2-1032-130 10-32 UNF .020 .130 .435 .390 CAH2-3118-312 5/16-18 UNC .150 .312 .845 .655* CAH2-1032-225 10-32 UNF .130 .225 .535 .390 CAH2-3124-150 5/16-24 UNF .027 .150 .685 .655* CAH2-2520-165 1/4-20 UNC .027 .165 .585 .510 CAH2-3124-312 5/16-24 UNF .150 .312 .845 .655* CAH2-2520-260 1/4-20 UNC .165 .260 .685 .510 CAH2-3716-150 3/8-16 .027 .685 .655* CAH2-2528-165 1/4-28 UNC UNF .027 .150 .165 .585 .510 CAH2-3716-312 3/8-16 .150 .845 .655* CAH2-2528-260 1/4-28 UNC UNF .165 .312 .260 .685 .510 CAH2-3724-150 3/8-24 UNF 027 .150 .685 .655* CAH2-3118-150 5/16-18 UNC .027 .150 .685 .655* CAH2-3724-312 3/8-24 UNF .845 .655* CAH2-3118-312 5/16-18 UNC .150 .150 .312 .312 .845 .655*

(

CAH2-3124-150 CAH2-3124-312 CAH2-3716-150 CAH2-3716-312 CAH2-3724-150 CAH2-3724-312

5/16-24 UNF 5/16-24 UNF 3/8-16 UNC 3/8-16 UNC 3/8-24 UNF 3/8-24 UNF

metric thread Part Number (Steel) CAH2-470-2.0 CAH2-470-3.3 CAH2-580-3.3 Part Number CAH2-580-5.7 (Steel) CAH2-610-4.2 CAH2-470-2.0 CAH2-610-6.6 CAH2-470-3.3 CAH2-8125-3.8 CAH2-580-3.3 CAH2-8125-7.9 CAH2-580-5.7 CAH2-1015-3.8 CAH2-610-4.2 CAH2-1015-7.9

.027 .150 .027 .150 027 .150

.150 .312 .150 .312 .150 .312

.685 .845 .685 .845 .685 .845

(unit -

Thread Size Grip Range Min. Max. M4x0.7 ISO 0.50 2.00 M4x0.7 ISO 2.00 3.30 M5x0.8 ISO 0.50 3.30 Thread Size Grip M5x0.8 ISO 3.30 Range 5.70 Min. 4.20 Max. M6x1.0 ISO 0.70 M4x0.7 ISO 0.50 6.60 2.00 M6x1.0 4.20 M4x0.7 ISO 2.00 3.80 3.30 M8x1.25 ISO 0.70 M5x0.8 ISO 0.50 7.90 3.30 M8x1.25 ISO 3.80 M5x0.8 ISO 3.30 3.80 5.70 M10x1.5 ISO 0.70 M6x1.0 ISO 0.70 7.90 4.20 M10x1.5 ISO 3.80

)

.655* .655* .655* .655* .655* .655*

CAH series

CLOSED END

HT ± .003 .027 .027 .027 .027 .027 HT .027 ±.027 .003 .027 .027 .030 .027 .030 .027 .030 .027 .030 .027 .035 .027 .035 .027 .035 .030 .035 .030 .035 .030 .035 .030 .035 .035 .035 .035

D Max. .249 .249 .249 .249 .280 D .280 Max. .280 .249 .280 .249 .374 .249 .374 .249 .374 .280 .374 .280 .499 .280 .499 .280 .499 .374 .499 .374 .499 .374 .499 .374 .499 .499 .499 .499

IL Max. .295 .295 .295 .295 .275 IL .275 Max. .275 .295 .275 .295 .400 .295 .400 .295 .400 .275 .400 .275 .530 .275 .515 .275 .530 .400 .515 .400 .530 .400 .515 .400 .530 .530 .515 .515

LB ± .015 .740 .740 .740 .740 1.030 LB 1.030 ± .015 1.030 .740 1.030 .740 1.190 .740 1.190 .740 1.190 1.030 1.190 1.030 1.445 1.030 1.445 1.030 1.445 1.190 1.445 1.190 1.445 1.190 1.445 1.190 1.445 1.445 1.445 1.445

ILB Max. .640 .580 .640 .580 .845 ILB .735 Max. .845 .640 .735 .580 1.015 .640 .915 .580 1.015 .845 .915 .735 1.235 .845 1.220 .735 1.235 1.015 1.220 .915 1.235 1.015 1.220 .915 1.235 1.235 1.220 1.220

ITD Ref. .575 .640 .575 .640 .695 ITD .805 Ref. .695 .575 .805 .640 .945 .575 1.085 .640 .945 .695 1.085 .805 1.045 .695 1.170 .805 1.045 .945 1.170 1.085 1.045 .945 1.170 1.085 1.045 1.045 1.170 1.170

Hole Size +.004/-.000 .250 .250 .250 .250 .281 Hole Size .281 +.004/-.000 .281 .250 .281 .250 .375 .250 .375 .250 .375 .281 .375 .281 .500 .281 .500 .281 .500 .375 .500 .375 .500 .375 .500 .375 .500 .500 .500 .500

.035 .035 .035 .035 .035 .035

.499 .499 .499 .499 .499 .499

.530 .515 .530 .515 .530 .515

1.445 1.445 1.445 1.445 1.445 1.445

1.235 1.220 1.235 1.220 1.235 1.220

1.045 1.170 1.045 1.170 1.045 1.170

.500 .500 .500 .500 .500 .500

D Max. 6.35 6.35 7.10 D 7.10 Max. 9.50 6.35 9.50 6.35 12.70 7.10 12.70 7.10 12.70 9.50 12.70

IL Max. 7.49 7.49 6.99 IL 6.99 Max. 10.16 7.49 10.16 7.49 13.46 6.99 13.08 6.99 13.46 10.16 13.08

LB ± .38 18.80 18.80 26.16 LB 26.16 ± .38 30.23 18.80 30.23 18.80 36.70 26.16 36.70 26.16 36.70 30.23 36.70

ILB Max. 16.26 14.73 21.46 ILB 18.67 Max. 25.78 16.26 23.24 14.73 31.37 21.46 30.99 18.67 31.37 25.78 30.99

ITD Ref. 14.61 16.26 17.65 ITD 20.45 Ref. 24.00 14.61 27.56 16.26 26.54 17.65 29.72 20.45 26.54 24.00 29.72

Hole Size +.10/-.000 6.35 6.35 7.14 Hole Size 7.14 +.10/-.000 9.53 6.35 9.53 6.35 12.70 7.14 12.70 7.14 12.70 9.53 12.70

• The CAH series offers a semi hex body for excellent resistance to spin out in the hole.

CLOSED END

millimeters)

L ± .38 9.78 11.05 11.05 L 13.59 ± .38 14.86 9.78 17.40 11.05 17.40 11.05 21.46 13.59 17.40 14.86 21.46

HD ±.25 ±.64* 9.53 9.53 9.91 HD 9.91 ±.25 ±.64* 12.96 9.53 12.96 9.53 16.64* 9.91 16.64* 9.91 16.64* 12.96 16.64*

HT ± .08 0.68 0.68 0.68 HT 0.68 ± .08 0.76 0.68 0.76 0.68 0.89 0.68 0.89 0.68 0.89 0.76 0.89

CAH2-610-6.6 M6x1.0 ISO 4.20 6.60 17.40 12.96 0.76 CAH2-8125-3.8 M8x1.25 ISO 0.70 3.80 17.40 16.64* 0.89 CAH2-8125-7.9 M8x1.25 ISO 3.80 7.90 21.46 16.64* 0.89 part numbering CAH2-1015-3.8 M10x1.5 ISO 0.70 system 3.80 17.40 16.64* 0.89 CAH2-1015-7.9 M10x1.5 ISO 3.80 7.90 21.46 16.64* 0.89 CAH Specifications Part Number Material: Steel 1008/1010 Example: CAH2-2520-165 Stainless Steel 302* 2 Aluminum 5056 CAH Material Product Style 1-Stainless Steel Finish: Zinc Plated-Yellow Dichromate Semi Hex 2-Steel per ASTM B633 Fe/Zn 8, Type II Thin Wall Series 3-Aluminum 4-Monel RoHS Compliant: Zinc 5-Brass Plated-Clear Trivalent Chromate per Sherex SFS-01-001

9.50 12.70 12.70 12.70 12.70

10.16 13.46 13.08 13.46 13.08

2520 Thread Size

30.23 36.70 36.70 36.70 36.70

23.24 31.37 30.99 31.37 30.99

27.56 26.54 29.72 26.54 29.72

165 Grip Range

9.53 12.70 12.70 12.70 12.70

(_) Empty-Open End B-Closed End T-Trivalent

Special finish or material available upon request

*Contact Sherex for exact product dimensions in Stainless Steel. Grip range can be affected by parent material and hole size. Sherex recommends trial installations to determine the proper grip range for the application. Contact Sherex for details. CAH style rivet nuts are available in sealed head and closed end designs. Other specials available upon request. Contact Sherex for test data. INSTALLATION TOOLING CAH Series can be installed with our Hand Tools, Pneumatic Tools, and Hydro-Pneumatic Tools. For additional tooling information see pages 26-28. Sherex rivet nuts are compatible with the following hardware: GRADE 2, GRADE 5, CLASS 8.8 and CLASS 9.8 Please contact Sherex when using other grade fasteners.

Phone: 866-474-3739 I Fax: 716-875-0358 I www.sherex.com I E-mail: info@sherex.com

CA HEAVY DUTY RIVET NUT FLAT HEAD SERIES

series

unified thread • The CA series offers a thick head and thick collapse chamber wall thickness for heavy duty applications. • Available with a countersunk head style for a flush installation. • Available in a keyed head style for reduced spin out

CLOSED END

COUNTERSUNK HEAD

Part Number (Steel) CA-0440S-060 CA-0440S-085 CA-0440S-110 CA-0632S-075 CA-0632S-120 CA-0632S-160 CA-0832S-075 CA-0832S-120 CA-0832S-160 CA-1024S-080 CA-1024S-130 CA-1024S-180 CA-1032S-080 CA-1032S-130 CA-1032S-180 CA-2520S-080 CA-2520S-140 CA-2520S-200 CA-3118S-125 CA-3118S-200 CA-3118S-275 CA-3716S-115 CA-3716S-200 CA-3716S-285 CA-5013S-150 CA-5013S-250 CA-5013S-350

(unit -

Thread Size 4-40 UNC 4-40 UNC 4-40 UNC 6-32 UNC 6-32 UNC 6-32 UNC 8-32 UNC 8-32 UNC 8-32 UNC 10-24 UNC 10-24 UNC 10-24 UNC 10-32 UNF 10-32 UNF 10-32 UNF 1/4-20 UNC 1/4-20 UNC 1/4-20 UNC 5/16-18 UNC 5/16-18 UNC 5/16-18 UNC 3/8-16 UNC 3/8-16 UNC 3/8-16 UNC 1/2-13 UNC 1/2-13 UNC 1/2-13 UNC

Grip Range Min. Max. .010 .060 .060 .085 .085 .100 .010 .075 .075 .120 .120 .160 .010 .075 .075 .120 .120 .160 .010 .080 .080 .130 .130 .180 .010 .080 .080 .130 .130 .180 .020 .080 .080 .140 .140 .200 .030 .125 .125 .200 .200 .275 .030 .115 .115 .200 .200 .285 .050 .150 .150 .250 .250 .350

Finish: Zinc Plated-Clear Dichromate per ASTM B633 Fe/Zn 8, Type II

MS/NAS available. Contact Sherex for more information.

L ± .015 .345 .370 .400 .438 .500 .500 .438 .500 .500 .531 .594 .641 .531 .594 .641 .625 .687 .750 .750 .875 .937 .844 .938 1.031 .906 1.031 1.141

HD ± .015 .270 .270 .270 .325 .325 .325 .357 .357 .357 .406 .406 .406 .406 .406 .406 .475 .475 .475 .665 .665 .655 .781 .781 .781 .906 .906 .906

HT Nom. .025 .025 .025 .032 .032 .032 .032 .032 .032 .038 .038 .038 .038 .038 .038 .058 .058 .058 .062 .062 .062 .088 .088 .088 .085 .085 .085

D +.000/-.004 .155 .155 .155 .189 .189 .189 .221 .221 .221 .250 .250 .250 .250 .250 .250 .332 .332 .332 .413 .413 .413 .490 .490 .490 .625 .625 .625

IL Ref. .230 .230 .230 .300 .315 .270 .300 .315 .270 .380 .390 .390 .380 .390 .390 .450 .450 .450 .505 .555 .540 .585 .595 .605 .605 .630 .640

Hole Size +.003/-.000 .155 .155 .155 .189 .189 .189 .221 .221 .221 .250 .250 .250 .250 .250 .250 .332 .332 .332 .413 .413 .413 .490 .490 .490 .625 .625 .625

part numbering system CA Specifications Material: Steel 1008/1010/1110 Non-Magnetic Stainless Steel 302 Stainless Steel 430 Aluminum 5056/6053

KEYED HEAD

inches)

RoHS Compliant: Zinc Plated-Clear Trivalent Chromate per Sherex SFS-01-001

Part Number Example: CA-2520S-080 CA Product Style Heavy Duty Large Flange Smooth Shank

2520 Thread Size

Material S-Steel A-Aluminum SS-Stainless Steel 430 NM-Stainless Steel 302

(_) Empty-Open End B-Closed End T-Trivalent

080 Grip Range

Special finish or material available upon request

Grip range can be affected by parent material and hole size. Sherex recommends trial installations to determine the proper grip range for the application. Contact Sherex for details. CA style rivet nuts are available in closed end, keyed, and countersunk head designs. Other specials available upon request. Contact Sherex for test data. INSTALLATION TOOLING CA Series can be installed with our Hand Tools, and Hydro-Pneumatic Tools. For additional tooling information see pages 26 & 28. Sherex rivet nuts are compatible with the following hardware: GRADE 2, GRADE 5, CLASS 8.8 and CLASS 9.8 Please contact Sherex when using other grade fasteners.

Phone: 866-474-3739 I Fax: 716-875-0358 I www.sherex.com I E-mail: info@sherex.com

CAO SMALL FLANGE SMOOTH BODY THIN WALL SERIES

CAO series

Part Number Thread Size Grip Range L HD (Steel) Min. Max. ± .015 ± .010 ±.015* CAO2-0632-080 6-32 UNC .020 .080 .385 .295 CAO2-0832-080 8-32 UNC .020 .080 .385 .295 CAO2-1024-130 10-24 UNC .020 .130 .440 .320 CAO2-1032-130 10-32 UNF .020 .130 .440 .320 CAO2-2520-165 1/4-20 UNCunit .580 .425 unified thread inches ( .030 -.165 ) CAO2-2528-165 1/4-28 UNF .030 .165 .580 .425 CAO2-3118-200 5/16-18 UNC .040 .200 .690 .560* Part Number Thread Size Grip Range L HD CAO2-3124-200 5/16-24 UNF .040 .200 .690 .560* (Steel) Min. Max. ± .015 ± .010 ±.015* CAO2-3716-200 3/8-16 UNC .040 .200 .690 .560* CAO2-0632-080 6-32 UNC .020 .200 .080 .385 .295 CAO2-3724-200 3/8-24 UNF .040 .690 .560* CAO2-0832-080 8-32 UNC .020 .080 .385 .295 CAO2-1024-130 10-24 UNC .020 .130 .440 .320 CAO2-1032-130 10-32 UNF .020 .130 .440 .320 CAO2-2520-165 1/4-20 UNC .030 .165 .580 .425 CAO2-2528-165 1/4-28 UNF .030 .165 .580 .425 CAO2-3118-200 5/16-18 UNC .040 .200 .690 .560* CAO2-3124-200 5/16-24 UNF .040 .200 .690 .560* CAO2-3716-200 3/8-16 UNC .040 .200 .690 .560* CAO2-3724-200 3/8-24 UNF .040 .200 .690 .560*

metric thread Part Number (Steel) CAO2-470-2.0 CAO2-580-3.3 CAO2-610-4.2 CAO2-8125-5.1 CAO2-1015-5.1

(unit -

Thread Size M4x0.7 ISO M5x0.8 ISO M6x1.0 ISO M8x1.25 ISO M10x1.5 ISO

L ± .38 9.78 11.18 14.73 17.53 17.53

HD ± .25 ± .38* 7.49 8.13 10.80 14.22* 14.22*

Part Number Thread Size Grip Range L ± (Steel) Min. Max. ± .38 CAO2-470-2.0 M4x0.7 ISO 0.50 2.00 9.78 part numbering system CAO2-580-3.3 M5x0.8 ISO 0.50 3.30 11.18 CAO2-610-4.2 0.76Part 4.20 CAO Specifications M6x1.0 ISO Number 14.73 Material: Steel 1008/1010 CAO2-8125-5.1 M8x1.25 ISO 1.02Example: 5.10 CAO2-2520-165 17.53 Aluminum 5056 CAO2-1015-5.1 M10x1.5 ISO 1.02 5.10 17.53 CAO Product Style Low Profile Smooth Shank Thin Wall Series

Finish: Inch: Zinc Plated per ASTM B633 Fe/Zn 8, Type III

Metric: Plated Yellow Dichromate per ASTM B633 Fe/Zn 8, Type II

RoHS Compliant: Zinc Plated-Clear Trivalent Chromate per Sherex SFS-01-001

D Max. .249 .249 .280 .280 .374 .374 .499 D .499 Max. .499 .249 .499 .249 .280 .280 .374 .374 .499 .499 .499 .499

IL Max. .315 .315 .330 .330 .440 .440 .540 IL .540 Max. .540 .315 .540 .315 .330 .330 .440 .440 .540 .540 .540 .540

Hole Size +.006/-.000 .250 .250 .281 .281 .375 .375 .500 Hole Size .500 +.006/-.000 .500 .250 .500 .250 .281 .281 .375 .375 .500 .500 .500 .500

HT ± .08 0.46 0.51 0.56 0.56 0.56

D Max. 6.32 7.11 9.50 12.67 12.67

IL Max. 8.00 8.38 11.18 13.72 13.72

Hole Size +.15/-.000 6.40 7.20 9.60 12.70 12.70

HT ± .08 0.46 0.51 0.56 0.56 0.56

D Max. 6.32 7.11 9.50 12.67 12.67

IL Max. 8.00 8.38 11.18 13.72 13.72

Hole Size +.15/-.000 6.40 7.20 9.60 12.70 12.70

• The CAO series offers a line of body diameters that will fit in common hole sizes. • The small flange head also allows for near flush installations.

millimeters)

Grip Range Min. Max. 0.50 2.00 0.50 3.30 0.76 4.20 1.02 5.10 1.02 5.10

HT ± .003 .018 .018 .020 .020 .022 .022 .022 HT .022 ± .003 .022 .018 .022 .018 .020 .020 .022 .022 .022 .022 .022 .022

HD .25 ± .38* 7.49 8.13 10.80 14.22* 14.22*

2 Material 2-Steel 3-Aluminum

2520 Thread Size

165 Grip Range

CLOSED END

(_) Empty-Open End B-Closed End T-Trivalent

Special finish or material available upon request

Grip range can be affected by parent material and hole size. Sherex recommends trial installations to determine the proper grip range for the application. Contact Sherex for details. Contact Sherex for test data. INSTALLATION TOOLING CAO Series can be installed with our Hand Tools, Pneumatic Tools, and Hydro-Pneumatic Tools. For additional tooling information see pages 26-28. Sherex rivet nuts are compatible with the following hardware: GRADE 2, GRADE 5, CLASS 8.8 and CLASS 9.8 Please contact Sherex when using other grade fasteners.

Phone: 866-474-3739 I Fax: 716-875-0358 I www.sherex.com I E-mail: info@sherex.com

CFW/ CAW series

CFW/CAW DIAMOND KNURLED 3600 SWAGING SERIES

Part Number

Cadmium Free

HD ± .005

L ± .015

D Max.

Hole Size +.005/-.00

N Free Cadmium N & N RoHS Compliant NN NN NN NN

0.255 HD 0.285 ±0.320 .005 0.320 0.255 0.415 0.285 0.550 0.320 0.615 0.320

0.370 L 0.370 ±0.370 .015 0.370 0.370 0.515 0.370 0.615 0.370 0.740 0.370

0.233 D 0.264 Max. 0.295 0.295 0.233 0.389 0.264 0.528 0.295 0.590 0.295

0.234 Hole Size 0.266 +.005/-.00 0.297

1/4-20 UNC 6-32 UNC 5/16-18 UNC 8-32 UNC 3/8-16 UNC 10-24 UNC 10-32 UNF 6-32 UNC 1/4-20 UNC 8-32 UNC 5/16-18 UNC 10-24 UNC 3/8-16 UNC 10-32 UNF

N NY NY Y YY YY YY YY

0.415 0.255 0.550 0.285 0.615 0.320 0.320 0.255 0.415 0.285 0.550 0.320 0.615 0.320

0.515 0.370 0.615 0.370 0.740 0.370 0.370 0.370 0.515 0.370 0.615 0.370 0.740 0.370

0.389 0.233 0.528 0.264 0.590 0.295 0.295 0.233 0.389 0.264 0.528 0.295 0.590 0.295

0.297 0.234 0.391 0.266 0.531 0.297 0.594 0.297 0.391 0.234 0.531 0.266 0.594 0.297 0.297 0.234 0.391 0.266 0.531 0.297 0.594 0.297

1/4-20 UNC 5/16-18 UNC 3/8-16 UNC

Y Y Y

0.415 0.550 0.615

0.515 0.615 0.740

0.389 0.528 0.590

0.391 0.531 0.594

HD ± .13

L ± .38

D Max.

Hole Size +.13/-.00

7.24 HD 8.13 ±10.54 .13 13.97 7.24 15.62 8.13

9.40 L 9.40 ± .38 13.08 15.62 9.40 18.80 9.40

6.71 D 7.50 Max. 9.88 13.41 6.71 14.99 7.50

6.75 Hole Size 7.54 +.13/-.00 9.92 13.49 6.75 15.00 7.54

10.54 7.24 13.97 8.13 15.62 10.54 13.97 7.24 15.62 8.13 10.54 13.97 15.62

13.08 9.40 15.62 9.40 18.80 13.08 15.62 9.40 18.80 9.40 13.08 15.62 18.80

9.88 6.71 13.41 7.50 14.99 9.88 13.41 6.71 14.99 7.50 9.88 13.41 14.99

9.92 6.75 13.49 7.54 15.00 9.92 13.49 6.75 15.00 7.54 9.92 13.49 15.00

Thread Size

& - inches ) RoHS Compliant

6-32 UNC 8-32 UNC Thread Size 10-24 UNC 10-32 UNF 6-32 UNC 1/4-20 UNC 8-32 UNC 5/16-18 UNC 10-24 UNC 3/8-16 UNC 10-32 UNF

unified thread (Steel) CAW2-0632 Part Number CAW2-0832 (Steel) CAW2-1024 CAW2-1032 CAW2-0632 CAW2-2520 CAW2-0832 CAW2-3118 CAW2-1024 CAW2-3716 CAW2-1032 CAW2-2520 CFW2-0632 CAW2-3118 CFW2-0832 CAW2-3716 CFW2-1024 CFW2-1032 CFW2-0632 CFW2-2520 CFW2-0832 CFW2-3118 CFW2-1024 CFW2-3716 CFW2-1032

• The CFW/CAW series offers a knurled body for increased spin out resistance in soft materials such as fiberglass and plywood. • Increased wall thickness gives increased shear strength. • Cadmium Free finish allows the CFW Series to be used in any industry, including automotive.

CFW2-2520 CFW2-3118 CFW2-3716

metric thread

(unit

(unit -

Part Number (Steel)

Thread Size

CAW2-470 Part Number CAW2-580 (Steel) CAW2-610 CAW2-8125 CAW2-470 CAW2-1015 CAW2-580

M4X0.7 ISO M5X0.8 ISO Thread Size M6X1.0 ISO M8X1.25 ISO M4X0.7 ISO M10X1.5 ISO M5X0.8 ISO

millimeters)

Cadmium Free & RoHS Compliant N Free Cadmium N & N RoHS Compliant NN NN

CAW2-610 M6X1.0 ISO CFW2-470 M4X0.7 ISO CAW2-8125 M8X1.25 ISO CFW2-580 M5X0.8 ISO CAW2-1015 M10X1.5 ISO CFW2-610 M6X1.0 ISO CFW2-8125 M8X1.25 ISO CFW2-470 M4X0.7 ISO CFW2-1015 M10X1.5 ISO CFW2-580 M5X0.8 ISO CFW2-610 M6X1.0 ISO CFW2-8125 M8X1.25 ISO part numbering system CFW2-1015 M10X1.5 ISO

N NY NY Y Y Y Y Y Y Y Y

CFW/CAW Specifications Material: Stainless Steel, 304 L Steel, 12L14 Steel, 1215

Part Number Example: CAW2-2520 CAW Cadmium W series Featuring 3600 Swaging

Finish:

CAW is CAD Plated per QQP-416 Type 1, Class 3 with clear protective coating

CFW is Proprietary Tin Plated

2 Material 1-Stainless Steel 2-Steel 3-Aluminum

2520 Thread Size

Special finish or material available upon request

*CFW and CAW rivet nut styles are dimensionally the same. CFW is Cadmium Free and RoHS Compliant. Actual hole size can be affected by parent material and material thickness. Contact Sherex for details. CFW/CAW series available in different finishes. Other specials available upon request. Contact Sherex for test data. INSTALLATION TOOLING CFW/CAW Series can be installed with our Hand Tools, Pneumatic Tools, and Hydro-Pneumatic Tools.

For additional tooling information see pages 26-28. Sherex rivet nuts are compatible with the following hardware: GRADE 2, GRADE 5, CLASS 8.8 and CLASS 9.8 Please contact Sherex when using other grade fasteners.

Phone: 866-474-3739 I Fax: 716-875-0358 I www.sherex.com I E-mail: info@sherex.com

CFT/CAT KNURLED 3600 SWAGING SERIES

CFT/ CAT series

Recommended Hole Size Part Number (Steel)

Thread Size

CAT2-0440 CAT2-0632 CAT2-0832 CAT2-1024 Part Number CAT2-1032 (Steel) CAT2-2520 CAT2-0440 CAT2-3118 CAT2-0632 CAT2-3716 CAT2-0832 CAT2-5013 CAT2-1024 CAT2-1032 CFT2-0440 CAT2-2520 CFT2-0632 CAT2-3118 CFT2-0832 CAT2-3716 CFT2-1024 CAT2-5013 CFT2-1032

4-40 UNC 6-32 UNC 8-32 UNC 10-24 UNC Thread Size 10-32 UNF 1/4-20 UNC 4-40 UNC 5/16-18 UNC 6-32 UNC 3/8-16 UNC 8-32 UNC 1/2-13 UNC 10-24 UNC 10-32 UNF 4-40 UNC 1/4-20 UNC 6-32 UNC 5/16-18 UNC 8-32 UNC 3/8-16 UNC 10-24 UNC 1/2-13 UNC 10-32 UNF

CFT2-2520 CFT2-0440 CFT2-3118 CFT2-0632 CFT2-3716 CFT2-0832 CFT2-5013 CFT2-1024 CFT2-1032 CFT2-2520 CFT2-3118 CFT2-3716 CFT2-5013

1/4-20 UNC 4-40 UNC 5/16-18 UNC 6-32 UNC 3/8-16 UNC 8-32 UNC 1/2-13 UNC 10-24 UNC 10-32 UNF 1/4-20 UNC 5/16-18 UNC 3/8-16 UNC 1/2-13 UNC

unified thread

metric thread Part Number (Steel)

Cadmium Free HD L & ± .005 ± .015 RoHS Compliant unit inches N 0.211 0.370 N 0.240 0.370 N 0.269 0.370 Cadmium N Free 0.306 0.370 HD L & N ±0.306 .005 ±0.370 .015 RoHS Compliant N 0.400 0.515 N 0.211 0.370 N 0.528 0.615 N 0.240 0.370 N 0.588 0.745 N 0.269 0.370 N 0.800 0.935 N 0.306 0.370 N 0.306 0.370 Y 0.211 0.370 N 0.400 0.515 Y 0.240 0.370 N 0.528 0.615 Y 0.269 0.370 N 0.588 0.745 Y 0.306 0.370 N 0.800 0.935 Y 0.306 0.370

)

Y Y Y Y Y Y Y Y Y Y Y Y Y

(unit -

Thread Size

CAT2-350 M3X0.5 ISO CAT2-470 M4X0.7 ISO CAT2-580 M5X0.8 ISO CAT2-610 M6X1.0 ISO Part Number Thread CAT2-8125 M8X1.25Size ISO (Steel) CAT2-1015 M10X1.5 ISO CAT2-350 M3X0.5 ISO CAT2-12175 M12X1.75 ISO CAT2-470 M4X0.7 ISO CAT2-580 M5X0.8 ISO CFT2-350 M3X0.5 ISO CAT2-610 M6X1.0 ISO CFT2-470 M4X0.7 ISO CAT2-8125 M8X1.25 ISO CFT2-580 M5X0.8 ISO CAT2-1015 M10X1.5 ISO CFT2-610 M6X1.0 ISO CAT2-12175 M12X1.75 ISO CFT2-8125 M8X1.25 ISO CFT2-1015 M10X1.5 ISO CFT2-350 M3X0.5 ISO CFT2-12175 M12X1.75 ISO CFT2-470 M4X0.7 ISO CFT2-580 M5X0.8 ISO CFT2-610 M6X1.0 ISO CFT2-8125 M8X1.25 ISO part numbering CFT2-1015 M10X1.5 ISO CFT2-12175 M12X1.75 ISO

CFT/CAT Specifications Material: Stainless Steel, 304 L Steel, 12L14 Steel, 1215

(

0.400 0.211 0.528 0.240 0.588 0.269 0.800 0.306 0.306 0.400 0.528 0.588 0.800

0.515 0.370 0.615 0.370 0.745 0.370 0.935 0.370 0.370 0.515 0.615 0.745 0.935

D Max.

MAT. THICK .030-.090

MAT. THICK .091-.124

MAT. THICK .125-.186

MAT. THICK .187-Over

0.1875 0.2185 0.2495 0.2805 D 0.2805 Max. 0.3745 0.1875 0.4995 0.2185 0.5615 0.2495 0.7485 0.2805 0.2805 0.1875 0.3745 0.2185 0.4995 0.2495 0.5615 0.2805 0.7485 0.2805

0.1875 0.2188 0.2500 0.2812 MAT. THICK 0.2812 .030-.090 0.3750 0.1875 0.5000 0.2188 0.5625 0.2500 0.7500 0.2812 0.2812 0.1875 0.3750 0.2188 0.5000 0.2500 0.5625 0.2812 0.7500 0.2812

0.1935 0.1935 0.2210 0.2280 Recommended Hole Size 0.2570 0.2656 0.2900 0.2900 MAT. THICK MAT. THICK 0.2900 0.2900 .091-.124 .125-.186 0.3750 0.3860 0.1935 0.1935 0.5000 0.5156 0.2210 0.2280 0.5625 0.5781 0.2570 0.2656 0.7656 0.7810 0.2900 0.2900 0.2900 0.2900 0.1935 0.1935 0.3750 0.3860 0.2210 0.2280 0.5000 0.5156 0.2570 0.2656 0.5625 0.5781 0.2900 0.2900 0.7656 0.7810 0.2900 0.2900

0.1960 0.2280 0.2656 0.2969 MAT. THICK 0.2969 .187-Over 0.3906 0.1960 0.5156 0.2280 0.5781 0.2656 0.7970 0.2969 0.2969 0.1960 0.3906 0.2280 0.5156 0.2656 0.5781 0.2969 0.7970 0.2969

0.3745 0.1875 0.4995 0.2185 0.5615 0.2495 0.7485 0.2805 0.2805 0.3745 0.4995 0.5615 0.7485

0.3750 0.1875 0.5000 0.2188 0.5625 0.2500 0.7500 0.2812 0.2812 0.3750 0.5000 0.5625 0.7500

0.3750 0.1935 0.5000 0.2210 0.5625 0.2570 0.7656 0.2900 0.2900 0.3750 0.5000 0.5625 0.7656

0.3860 0.1935 0.5156 0.2280 0.5781 0.2656 0.7810 0.2900 0.2900 0.3860 0.5156 0.5781 0.7810

0.3906 0.1960 0.5156 0.2280 0.5781 0.2656 0.7970 0.2969 0.2969 0.3906 0.5156 0.5781 0.7970

• The CFT/CAT series offers one rivet nut for materials of any thickness greater than .0020 inches. • Cadmium Free finish allows the CFT Series to be used in any industry, including automotive. • CFT series should be used in metal applications.

millimeters)

Cadmium Free & RoHS Compliant N N N Cadmium N Free & N RoHS Compliant N N N N N Y N Y N Y N Y N Y Y Y Y Y Y Y Y system Y Y

Recommended Hole Size HD ± .13

L ± .38

D Max.

MAT. THICK 0.76-2.29

MAT. THICK 2.31-3.15

MAT. THICK 3.17-4.72

MAT. THICK 4.72-Over

5.36 6.83 7.77 10.16 HD 13.41 ± .13 14.94 5.36 20.32 6.83 7.77 5.36 10.16 6.83 13.41 7.77 14.94 10.16 20.32 13.41 14.94 5.36 20.32 6.83 7.77 10.16 13.41 14.94 20.32

9.40 9.40 9.40 13.08 L 15.62 ± .38 18.92 9.40 23.75 9.40 9.40 9.40 13.08 9.40 15.62 9.40 18.92 13.08 23.75 15.62 18.92 9.40 23.75 9.40 9.40 13.08 15.62 18.92 23.75

4.76 6.34 7.12 9.51 D 12.69 Max. 14.26 4.76 19.01 6.34 7.12 4.76 9.51 6.34 12.69 7.12 14.26 9.51 19.01 12.69 14.26 4.76 19.01 6.34 7.12 9.51 12.69 14.26 19.01

4.75 6.35 7.14 MAT.9.52 THICK 12.70 0.76-2.29 14.28 4.75 19.05 6.35 7.14 4.75 9.52 6.35 12.70 7.14 14.28 9.52 19.05 12.70 14.28 4.75 19.05 6.35 7.14 9.52 12.70 14.28 19.05

4.90 4.900 6.52 6.740 Recommended Hole Size 7.36 7.360 9.800 MAT.9.52 THICK MAT. THICK 12.70 13.090 2.31-3.15 3.17-4.72 14.28 14.680 4.90 4.900 19.44 19.830 6.52 6.740 7.36 7.360 4.90 4.900 9.52 9.800 6.52 6.740 12.70 13.090 7.36 7.360 14.28 14.680 9.52 9.800 19.44 19.830 12.70 13.090 14.28 14.680 4.90 4.900 19.44 19.830 6.52 6.740 7.36 7.360 9.52 9.800 12.70 13.090 14.28 14.680 19.44 19.830

4.97 6.74 7.54 MAT.9.92 THICK 13.09 4.72-Over 14.68 4.97 20.24 6.74 7.54 4.97 9.92 6.74 13.09 7.54 14.68 9.92 20.24 13.09 14.68 4.97 20.24 6.74 7.54 9.92 13.09 14.68 20.24

Part Number Example: CAT2-2520

CAT Cadmium T series Featuring 3600 Swaging

Finish:

CAT is CAD Plated per QQP-416 Type 1, Class 3 with clear protective coating

CFT is Proprietary Tin Plated

2 Material 1-Stainless Steel 2-Steel 3-Aluminum

2520 Thread Size

Special finish or material available upon request

*CFT and CAT rivet nut styles are dimensionally the same. CFT is Cadmium Free and RoHS Compliant. Actual hole size can be affected by parent material and material thickness. Contact Sherex for details. CFT/CAT series available in different finishes. Other specials available upon request. Contact Sherex for test data. INSTALLATION TOOLING CFT/CAT Series can be installed with our Hand Tools, Pneumatic Tools, and Hydro-Pneumatic Tools. For additional tooling information see pages 26-28. Sherex rivet nuts are compatible with the following hardware: GRADE 2, GRADE 5, CLASS 8.8 and CLASS 9.8 Please contact Sherex when using other grade fasteners.

Phone: 866-474-3739 I Fax: 716-875-0358 I www.sherex.com I E-mail: info@sherex.com

CPB

CPB PREBULBED SLOTTED BODY SERIES

series

• The CPB series offers a large grip range for installation into single, variable or multiple thickness materials. • Large backside footprint provides increased pull out resistance. • The CPB Series can be installed into thin plastics and will not distort the base material.

Part Number Thread Size Grip Range HD (Steel) Min. Max. Min. Max. CPB2-1024-175 10-24 UNC .020 .175 .490 .510 CPB2-1024-320 10-24 UNC .175 .320 .490 .510 CPB2-1032-175 10-32 UNF .020 .175 .490 .510 CPB2-1032-320 10-32 UNF .175 .320 .490 .510 CPB2-2520-280 1/4-20 UNC .020 .280 .610 .645 unified thread inches (unit CPB2-2520-500 1/4-20 UNC .280 - .500 .610 ).645 CPB2-3118-280 5/16-18 UNC .020 Range .280 .740HD.770 Part Number Thread Size Grip CPB2-3118-500 5/16-18 UNC .280 (Steel) Min. .500 Max. .740 Min. .770 Max. CPB2-1024-175 CPB2-1024-320 CPB2-1032-175 CPB2-1032-320 CPB2-2520-280 CPB2-2520-500 CPB2-3118-280 CPB2-3118-500

10-24 UNC 10-24 UNC 10-32 UNF 10-32 UNF 1/4-20 UNC 1/4-20 UNC 5/16-18 UNC 5/16-18 UNC

metric thread Part Number (Steel) CPB2-580-4.45 CPB2-580-8.1 CPB2-610-7.1 CPB2-610-12.7 CPB2-8125-7.1 CPB2-8125-12.7 WEDGE HEAD

(unit -

Thread Size M5x0.8 ISO M5x0.8 ISO M6x1.0 ISO M6x1.0 ISO M8x1.25 ISO M8x1.25 ISO

.175 .320 .175 .320 .280 .500 .280 .500

.490 .490 .490 .490 .610 .610 .740 .740

.510 .510 .510 .510 .645 .645 .770 .770

HT ±.005 .038 .038 .038 .038 .059 .059 .062 HT .062 ±.005

D Max. .329 .329 .329 .329 .382 .382 .495 D .495 Max.

IL Ref. .410 .410 .410 .410 .505 .505 .570 IL .570 Ref.

Hole Size +.006/-.000 .336 .336 .336 .336 .390 .390 .500 Hole Size .500 +.006/-.000

.828 .921 .828 .921 1.000 1.234 1.141 1.375

.038 .038 .038 .038 .059 .059 .062 .062

.329 .329 .329 .329 .382 .382 .495 .495

.410 .410 .410 .410 .505 .505 .570 .570

.336 .336 .336 .336 .390 .390 .500 .500

HT ±.0.13 0.96 0.96 1.50 1.50 1.57 1.57

D Max. 8.35 8.35 9.70 9.70 12.57 12.57

IL Ref. 10.00 10.00 12.80 12.80 14.48 14.48

Hole Size +.15/-.000 8.55 8.55 10.00 10.00 12.70 12.70

millimeters)

Grip Range Min. Max. 0.50 4.45 4.45 8.10 0.50 7.10 7.10 12.70 0.50 7.10 7.10 12.70

HD Min. Max. 12.45 12.95 12.45 12.95 15.50 16.38 15.50 16.38 18.80 19.65 18.80 19.65

Thread Size Grip Range HD Part Number (Steel) Min. Max. Min. Max. CPB2-580-4.45 M5x0.8 ISO 0.50 4.45 12.45 12.95 part numbering CPB2-580-8.1 M5x0.8 ISOsystem 4.45 8.10 12.45 12.95 CPB2-610-7.1 M6x1.0 ISO 0.50 7.10 15.50 16.38 CPB Specifications Part Number CPB2-610-12.7 M6x1.0 ISO 7.10 12.70 15.50 16.38 Steel 1008/1010 Material: Example: CPB2-2520-280 M8x1.25 ISO 0.50 7.10 18.80 19.65 CPB2-8125-7.1 Aluminum 5056 2 19.65 CPB2-8125-12.7 CPB 12.70 18.80 M8x1.25 ISO 7.10 Finish: Zinc Plated-Yellow Dichromate per ASTM B633 Fe/Zn 8, Type II

TRIM HEAD

.020 .175 .020 .175 .020 .280 .020 .280

L ±.015 .828 .921 .828 .921 1.000 1.234 1.141 L 1.375 ±.015

Product Style Slotted Body Pre-bulbed

2-Steel 3-Aluminum

L ±.0.38 21.03 23.80 25.40 31.32 28.95 34.90

L HT D ±.0.38 ±.0.13 Max. 21.03 0.96 8.35 23.80 0.96 8.35 25.40 1.50 9.70 31.32 1.50 9.70 28.95 1.57 12.57 2520 34.90 1.57 280 12.57 Thread Size

IL Hole Size Ref. +.15/-.000 10.00 8.55 10.00 8.55 12.80 10.00 12.80 10.00 14.48 12.70 14.48 (_) 12.70

Grip Range

RoHS Compliant: Zinc Plated-Clear Trivalent Chromate per Sherex SFS-01-001

Empty-Open End B-Closed End T-Trivalent W-Wedge Head TR-Trim Head

Special finish or material available upon request

Grip range can be affected by parent material and hole size. Sherex recommends trials installations to determine the proper grip range for the application. Contact Sherex for details. Contact Sherex for test data. INSTALLATION TOOLING CPB Series can be installed with our Hand Tools, Pneumatic Tools, and Hydro-Pneumatic Tools. For additional tooling information see pages 26-28.

Sherex rivet nuts are compatible with the following hardware: GRADE 2, GRADE 5, CLASS 8.8 and CLASS 9.8 Please contact Sherex when using other grade fasteners.

Phone: 866-474-3739 I Fax: 716-875-0358 I www.sherex.com I E-mail: info@sherex.com

CPN STRAIGHT SHANK SLOTTED BODY SERIES

CPN series

Part Number Thread Size Grip Range HD (Steel) Min. Max. Min. Max CPN2-1024-175 10-24 UNC .020 .175 .490 .510 CPN2-1024-320 10-24 UNC .175 .320 .490 .510 CPN2-1032-175 10-32 UNF .020 .175 .490 .510 CPN2-1032-320 10-32 UNF .175 .320 .490 .510 CPN2-2520-280 1/4-20 UNC .020 .280 .610 .645 unified thread (unit - inches) CPN2-2520-500 1/4-20 UNC .280 .500 .610 .645 CPN2-3118-280 5/16-18 Size UNC Grip .020 Range .280 .740 HD.770 Part Number Thread CPN2-3118-500 .500 .740 .770 5/16-18 UNC .280 (Steel) Min. Max. Min. Max CPN2-1024-175 CPN2-1024-320 CPN2-1032-175 CPN2-1032-320 CPN2-2520-280 CPN2-2520-500 CPN2-3118-280 CPN2-3118-500

10-24 UNC 10-24 UNC 10-32 UNF 10-32 UNF 1/4-20 UNC 1/4-20 UNC 5/16-18 UNC 5/16-18 UNC

metric thread Part Number (Steel) CPN2-580-4.45 CPN2-580-8.1 CPN2-610-7.1 CPN2-610-12.7 CPN2-8125-7.1 CPN2-8125-12.7

.020 .175 .020 .175 .020 .280 .020 .280

(unit -

Thread Size

.175 .320 .175 .320 .280 .500 .280 .500

.490 .490 .490 .490 .610 .610 .740 .740

.510 .510 .510 .510 .645 .645 .770 .770

L ± .015 .781 .921 .781 .921 1.000 1.234 1.141 L ±1.375 .015

HT ± .005 .038 .038 .038 .038 .059 .059 .062 HT ±.062 .005

D Max. .272 .272 .272 .272 .346 .346 .437 D .437 Max.

IL Ref. .425 .425 .425 .425 .505 .505 .570 IL .570 Ref.

Hole Size +.006/-.000 .273 .273 .273 .273 .347 .347 .438 Hole Size .438 +.006/-.000

.781 .921 .781 .921 1.000 1.234 1.141 1.375

.038 .038 .038 .038 .059 .059 .062 .062

.272 .272 .272 .272 .346 .346 .437 .437

.425 .425 .425 .425 .505 .505 .570 .570

.273 .273 .273 .273 .347 .347 .438 .438

HD Min. Max 12.45 12.95 12.45 12.95 15.50 16.38 15.50 16.38 18.80 19.65 18.80 19.65

L ± 0.38 21.03 23.80 25.40 31.32 28.95 34.90

HT ± .13 0.96 0.96 1.50 1.50 1.57 1.57

D Max. 7.47 7.47 8.79 8.79 11.10 11.10

IL Ref. 9.90 9.90 12.80 12.80 14.48 14.48

Hole Size +0.15/-0.00 7.48 7.48 8.80 8.80 11.11 11.11

Part Number Thread Size Grip Range HD Min. Max. Min. Max (Steel) CPN2-580-4.45 M5x0.8 ISO 0.50 4.45 12.45 12.95 CPN2-580-8.1 M5x0.8 ISO 4.45 8.10 12.45 12.95 part numbering CPN2-610-7.1 M6x1.0 ISO system 0.50 7.10 15.50 16.38 CPN2-610-12.7 M6x1.0 ISO 7.10 12.70 15.50 16.38 CPN Specifications CPN2-8125-7.1 M8x1.25 ISO 0.50Part Number 7.10 18.80 19.65 Material: Steel 1008/1010 Example: CPN2-2520-280 CPN2-8125-12.7 M8x1.25 ISO 7.10 12.70 18.80 19.65 Aluminum 5056

L ± 0.38 21.03 23.80 25.40 31.32 28.95 34.90

HT ± .13 0.96 0.96 1.50 1.50 1.57 1.57

D Max. 7.47 7.47 8.79 8.79 11.10 11.10

IL Ref. 9.90 9.90 12.80 12.80 14.48 14.48

Hole Size +0.15/-0.00 7.48 7.48 8.80 8.80 11.11 11.11

M5x0.8 ISO M5x0.8 ISO M6x1.0 ISO M6x1.0 ISO M8x1.25 ISO M8x1.25 ISO

Finish: Zinc Plated-Yellow Dichromate per ASTM B633 Fe/Zn 8, Type II

RoHS Compliant: Zinc Plated-Clear Trivalent Chromate per Sherex SFS-01-001

CPN Product Style Slotted Body Straight Shank

• Large backside footprint provides increased pull out resistance. • The CPN series can be installed into thin plastics and will not distort the base material. • CPN must be installed with spin-pull installation tooling.

millimeters)

Grip Range Min. Max. 0.50 4.45 4.45 8.10 0.50 7.10 7.10 12.70 0.50 7.10 7.10 12.70

• The CPN series offers a large grip range for installation into single, variable or multiple thickness materials.

2 2520 2-Steel Thread Size 3-Aluminum

280 Grip Range

WEDGE HEAD

(_) Empty-Open End B-Closed End T-Trivalent W-Wedge Head

Special finish or material available upon request

Grip range can be affected by parent material and hole size. Sherex recommends trials installations to determine the proper grip range for the application. Contact Sherex for details. Contact Sherex for test data. INSTALLATION TOOLING CPN Series must be installed with spin pull tooling. For more information see page 28. Sherex rivet nuts are compatible with the following hardware: GRADE 2, GRADE 5, CLASS 8.8 and CLASS 9.8 Please contact Sherex when using other grade fasteners.

Phone: 866-474-3739 I Fax: 716-875-0358 I www.sherex.com I E-mail: info@sherex.com

CFH/ CFHD series

CFH & CFHD FULL HEX BODY SERIES CFH SERIES

CFHD SERIES

cfh unified thread

• The CFH series offers a full hexagonal body for exceptional spin out resistance

SHEREX SHEREX Part Number Part Number CFH2-1024-085 CFH2-1024-085 CFH2-1024-135 CFH2-1024-135 CFH2-1024-185 CFH2-1024-185 CFH2-1032-085 CFH2-1032-085 CFH2-1032-135 CFH2-1032-135 CFH2-1032-185 CFH2-1032-185 CFH2-2520-085 CFH2-2520-085 CFH2-2520-145 CFH2-2520-145 CFH2-2520-205 CFH2-2520-205 CFH2-3118-105 CFH2-3118-105 CFH2-3118-175 CFH2-3118-175 CFH2-3118-245 CFH2-3118-245 CFH2-3716-115 CFH2-3716-115 CFH2-3716-205 CFH2-3716-205 CFH2-3716-295 CFH2-3716-295

Thread Size Thread Size 10-24 UNC 10-24 UNC UNC 10-24 10-24 UNC UNC 10-24 10-24 UNC 10-32 UNF 10-32 UNF UNF 10-32 10-32 UNF UNF 10-32 10-32 UNF 1/4-20 UNC 1/4-20 UNC UNC 1/4-20 1/4-20 UNC 1/4-20 UNC 1/4-20 UNC 5/16-18 UNC 5/16-18 UNC UNC 5/16-18 5/16-18 UNC 5/16-18 UNC 5/16-18 UNC 3/8-16 UNC 3/8-16 UNC 3/8-16 UNC 3/8-16 UNC UNC 3/8-16 3/8-16 UNC

Grip Range Grip Range Min. Max. Min. Max. 0.010 0.085 0.010 0.135 0.085 0.085 0.085 0.185 0.135 0.135 0.135 0.185 0.010 0.085 0.010 0.135 0.085 0.085 0.085 0.185 0.135 0.135 0.135 0.085 0.185 0.020 0.020 0.145 0.085 0.085 0.085 0.145 0.145 0.205 0.145 0.205 0.030 0.105 0.030 0.175 0.105 0.105 0.105 0.175 0.175 0.245 0.175 0.115 0.245 0.030 0.030 0.115 0.115 0.205 0.115 0.295 0.205 0.205 0.205 0.295

cfh metric thread SHEREX SHEREX Part Number Part Number CFH2-580-2.1 CFH2-580-2.1 CFH2-580-3.5 CFH2-580-3.5 CFH2-580-5.0 CFH2-580-5.0 CFH2-610-2.1 CFH2-610-2.1 CFH2-610-3.6 CFH2-610-3.6 CFH2-610-5.2 CFH2-610-5.2 CFH2-8125-2.5 CFH2-8125-2.5 CFH2-8125-4.5 CFH2-8125-4.5 CFH2-8125-6.6 CFH2-8125-6.6 CFH2-1015-2.9 CFH2-1015-2.9 CFH2-1015-5.2 CFH2-1015-5.2 CFH2-1015-7.5 CFH2-1015-7.5

Thread Size Thread Size M5x0.8 ISO M5x0.8 ISO ISO M5x0.8 M5x0.8 ISO M5x0.8 ISO M5x0.8 ISO ISO M6x1.0 M6x1.0 ISO M6x1.0 ISO M6x1.0 ISO ISO M6x1.0 M6x1.0 M8x1.25 ISO ISO M8x1.25 ISO M8x1.25 ISO M8x1.25 ISO ISO M8x1.25 M8x1.25 ISO M10x1.50 ISO M10x1.50 ISO ISO M10x1.50 M10x1.50 ISO M10x1.50 ISO M10x1.50 ISO

(unit -

cfhd unified thread

• The CFHD series offers the same benefits as the CFH series but with higher strength.

SHEREX SHEREX Part Number Part Number CFHD2-2520-080 CFHD2-2520-080 CFHD2-2520-150 CFHD2-2520-150 CFHD2-3118-100 CFHD2-3118-100 CFHD2-3118-180 CFHD2-3118-180 CFHD2-3716-125 CFHD2-3716-125 CFHD2-3716-230 CFHD2-3716-230

HD L HT L HT Min.HDMax. ± .015 Nom. Min. Max. ± .015 Nom. 0.329 0.359 0.344 0.043 0.329 0.359 0.359 0.406 0.344 0.043 0.043 0.329 0.329 0.359 0.359 0.453 0.406 0.043 0.043 0.329 0.329 0.359 0.453 0.043 0.329 0.359 0.344 0.043 0.329 0.359 0.359 0.406 0.344 0.043 0.043 0.329 0.329 0.359 0.359 0.453 0.406 0.043 0.043 0.329 0.329 0.452 0.359 0.406 0.453 0.043 0.043 0.422 0.422 0.452 0.452 0.469 0.406 0.043 0.043 0.422 0.422 0.452 0.469 0.043 0.422 0.452 0.531 0.043 0.422 0.452 0.531 0.043 0.547 0.577 0.562 0.048 0.547 0.577 0.577 0.640 0.562 0.048 0.048 0.547 0.547 0.577 0.640 0.048 0.547 0.577 0.703 0.048 0.547 0.671 0.577 0.625 0.703 0.058 0.048 0.641 0.641 0.671 0.625 0.058 0.641 0.671 0.718 0.058 0.641 0.671 0.671 0.812 0.718 0.058 0.058 0.641 0.641 0.671 0.812 0.058

(unit -

Grip Range Grip Range Min. Max. Min. Max. 0.50 2.15 0.50 2.15 2.15 3.55 2.15 3.55 3.55 5.05 3.55 5.05 0.50 2.15 0.50 2.15 2.15 3.65 2.15 3.65 3.65 5.20 3.65 5.20 0.50 2.55 0.50 2.55 2.50 4.55 2.50 4.55 4.55 6.60 4.55 6.60 0.75 2.95 0.75 2.95 2.95 5.20 2.95 5.20 5.20 7.50 5.20 7.50

inches)

millimeters)

HD L HT L HT HD Min. Max. ± .038 Nom. Min. Max. ± .038 Nom. 9.14 9.90 10.30 1.09 9.14 9.90 9.90 10.30 1.09 9.14 11.90 1.09 9.14 9.90 11.90 1.09 9.14 9.90 13.48 1.09 9.14 9.90 13.48 1.09 10.71 11.47 10.30 1.09 10.71 11.47 11.47 11.90 10.30 1.09 10.71 1.09 10.71 11.47 11.47 13.48 11.90 1.09 10.71 1.09 10.71 11.47 13.48 1.09 14.69 15.45 15.86 1.57 14.69 15.45 15.86 1.57 14.69 15.45 17.84 1.57 14.69 15.45 17.84 1.57 14.69 15.45 19.82 1.57 14.69 15.45 19.82 1.57 17.10 17.86 15.88 1.57 17.10 17.86 15.88 1.57 17.10 17.86 18.24 1.57 17.10 17.86 17.86 20.62 18.24 1.57 17.10 1.57 17.10 17.86 20.62 1.57

(unit -

Grip Range Thread Size Grip Range Thread Size Min. Max. Min. Max. 1/4-20 UNC 0.020 0.080 1/4-20 UNC 0.020 0.080 1/4-20 UNC 0.080 0.150 1/4-20 UNC 0.080 0.150 5/16-18 UNC 0.020 0.100 5/16-18 UNC 0.020 0.100 5/16-18 UNC 0.100 0.180 5/16-18 UNC 0.100 0.180 3/8-16 UNC 0.020 0.125 3/8-16 UNC 0.020 0.125 3/8-16 UNC 0.125 0.230 3/8-16 UNC 0.125 0.230

D D Max. Max. 0.223 0.223 0.223 0.223 0.223 0.223 0.223 0.223 0.223 0.223 0.223 0.223 0.296 0.296 0.296 0.296 0.296 0.296 0.368 0.368 0.368 0.368 0.368 0.368 0.437 0.437 0.437 0.437 0.437 0.437

IL Hole Size IL Hole Size Ref. ±.005/-.000 Ref. ±.005/-.000 0.200 0.224 0.200 0.224 0.210 0.224 0.210 0.224 0.210 0.224 0.210 0.224 0.200 0.224 0.200 0.224 0.210 0.224 0.210 0.224 0.210 0.224 0.210 0.224 0.250 0.297 0.250 0.297 0.250 0.297 0.250 0.297 0.250 0.297 0.250 0.297 0.375 0.369 0.375 0.369 0.380 0.369 0.380 0.369 0.375 0.369 0.375 0.369 0.400 0.438 0.400 0.438 0.405 0.438 0.405 0.438 0.410 0.438 0.410 0.438

D D Max. Max. 6.35 6.35 6.35 6.35 6.35 6.35 7.51 7.51 7.51 7.51 7.51 7.51 10.08 10.08 10.08 10.08 10.08 10.08 11.89 11.89 11.89 11.89 11.89 11.89

IL Hole Size IL Hole Size Ref. ±.005/-.000 Ref. ±.005/-.000 6.72 6.35 6.72 6.35 6.72 6.35 6.72 6.35 6.72 6.35 6.72 6.35 6.22 7.51 6.22 7.51 6.22 7.51 6.22 7.51 6.22 7.51 6.22 7.51 10.35 10.08 10.35 10.08 10.35 10.08 10.35 10.08 10.35 10.08 10.35 10.08 13.08 11.89 13.08 11.89 13.08 11.89 13.08 11.89 13.08 11.89 13.08 11.89

inches)

HD L HT D IL Hole Size HD L HT D IL Hole Size Min. Max. ± .015 Nom. Max. Ref. ±.005/-.000 Min. Max. ± .015 Nom. Max. Ref. ±.005/-.000 0.454 0.484 0.500 0.058 0.312 0.340 0.312 0.454 0.484 0.500 0.058 0.312 0.340 0.312 0.454 0.484 0.578 0.058 0.312 0.345 0.312 0.454 0.484 0.578 0.058 0.312 0.345 0.312 0.579 0.609 0.625 0.062 0.397 0.405 0.397 0.579 0.609 0.625 0.062 0.397 0.405 0.397 0.579 0.609 0.703 0.062 0.397 0.405 0.397 0.579 0.609 0.703 0.062 0.397 0.405 0.397 0.673 0.703 0.703 0.088 0.468 0.450 0.468 0.673 0.703 0.703 0.088 0.468 0.450 0.468 0.673 0.703 0.812 0.088 0.468 0.450 0.468 0.673 0.703 0.812 0.088 0.468 0.450 0.468

part numbering system CFH/CFHD Specifications

Material: Steel 1008/1010 Stainless Steel 302 Aluminum 5056 Finish: Zinc Plated - Yellow Dichromate per ASTM B633 Fe/Zn 8, Type II

Part Number Example: CFH2-2520-085

2520 CFH Thread Size Full Hex Heavy Duty Large Flange RoHS Compliant: Zinc Plated-Clear Trivalent Chromate CFHD - High Strength per Sherex SFS-01-001

2 Material 1-Stainless Steel 2-Steel 3-Aluminum

(_) Empty-Open End B-Closed End

Special finish or material available upon request

Sherex rivet nuts are compatible with the following hardware: GRADE 2, GRADE 5, CLASS 8.8 and CLASS 9.8 Please contact Sherex when using other grade fasteners.

Phone: 866-474-3739 I Fax: 716-875-0358 I www.sherex.com I E-mail: info@sherex.com

NOTES NOTES

Phone: 866-474-3739 I Fax: 716-875-0358 I www.sherex.com I E-mail: info@sherex.com

METRIC BODY STYLE Rivet Nuts

METRIC BODY STYLE RIVET NUTS

• Metric body styles are designed to be placed into metric drill/punched holes. • Many of the metric body styles are available with inch/imperial thread. • Manufactured in our ISO/TS 16949 certified production facility or by our Belgium partner Dejond. • Special designs are available to meet customer specific requirements. Contact Sherex with your application information.

Phone: 866-474-3739 I Fax: 716-875-0358 I www.sherex.com I E-mail: info@sherex.com

UPO LARGE FLANGE EUROPEAN SERIES

UPO series

metric thread

Part Number (Steel) TU-SM3UPO20 TU-SM3UPO30 TU-SM4UPO30 TU-SM4UPO45 TU-SM5UPO30 TU-SM5UPO55 TU-SM6UPO30 TU-SM6UPO55 TU-SM6UPO80 TU-SM8UPO30 TU-SM8UPO55 TU-SM8UPO80 TU-SM10UPO35 TU-SM10UPO60 TU-SM10SPO35 TU-SM10SPO60 TU-SM12UPO40 TU-SM12UPO70

(unit -

Thread Size M3X0.5 ISO M3X0.5 ISO M4X0.7 ISO M4X0.7 ISO M5X0.8 ISO M5X0.8 ISO M6X1.0 ISO M6X1.0 ISO M6X1.0 ISO M8X1.25 ISO M8X1.25 ISO M8X1.25 ISO M10X1.5 ISO M10X1.5 ISO M10X1.5 ISO M10X1.5 ISO M12X1.75 ISO M12X1.75 ISO

millimeters)

Grip Range (E) Min. Max. 0,5 2,0 2,0 3,0 0,5 3,0 3,0 4,5 0,5 3,0 3,0 5,5 0,5 3,0 3,0 5,5 5,5 8,0 0,5 3,0 3,0 5,5 5,5 8,0 0,8 3,5 3,5 6,0 0,8 3,5 3,5 6,0 1,0 4,0 4,0 7,0

L 9,75 10,75 10,75 12,25 12,0 15,0 14,5 16,5 19,0 16,0 18,5 21,5 19,75 22,75 21,0 24,0 25,0 28,0

Hole Size

8,0

0,75

5,0

5,1

10,0

0,75

6,0

11,0

1,0

7,0

13,0

1,5

9,0

16,0

1,5

11,0

18,5

2,25

12,4

12,5

19,0

2,0

13,0

23,0

2,0

16,0

• The UPO series offers a large flange for increased strength and better containment of round or oversized holes. • The metric body dimensions allow for use in metric holes.

CLOSED END

part numbering system UPO Specifications

Part Number Example: TU-SM5UPO30

TU Product Style European

S M5 Material Thread Size S-Steel A-Aluminum SS-304 Stainless Steel *316-316 Stainless Steel

Finish: Zinc Plated-Yellow Dichromate RoHS Compliant: Zinc Top

UP Product Type Large Flange, Flat Head Metric Body

O O-Open End X-Closed End

30 Grip Range

Special finish or material available upon request

*316 Stainless Steel has extra corrosion resistance and can be used in the medical, chemical and food industries. Grip Range can be affected by parent material and hole size. Sherex recommends trial installations to determine the proper grip range for the application. Closed End sizes available: M4, M5, M6, and M8. Also available with imperial threads - minimum order quantity is 25,000 pieces if not in stock. Contact Sherex for test data. INSTALLATION TOOLING UPO Series can be installed with our Hand Tools, and Hydro-Pneumatic Tools. For additional tooling information see pages 27 & 28.

All Parts have been manufactured by: TUBTARA®- A DEJOND PRODUCT Sherex rivet nuts are compatible with the following hardware: GRADE 2, GRADE 5, CLASS 8.8 and CLASS 9.8 Please contact Sherex when using other grade fasteners.

Phone: 866-474-3739 I Fax: 716-875-0358 I www.sherex.com I E-mail: info@sherex.com

UFO

UFO COUNTERSUNK HEAD EUROPEAN SERIES

series

• The UFO series offers a contersunk head for flush installation into the parent materials. • The metric body dimensions allow for use in metric holes.

metric thread

Part Number (Steel) TU-SM3UFO35 TU-SM4UFO35 TU-SM4UFO50 TU-SM5UFO40 TU-SM5UFO65 TU-SM6UFO45 TU-SM6UFO65 TU-SM8UFO45 TU-SM8UFO65 TU-SM10UFO45 TU-SM10UFO65 TU-SM12UFO45 TU-SM12UFO75

(unit -

Thread Size M3X0.5 ISO M4X0.7 ISO M4X0.7 ISO M5X0.8 ISO M5X0.8 ISO M6X1.0 ISO M6X1.0 ISO M8X1.25 ISO M8X1.25 ISO M10X1.5 ISO M10X1.5 ISO M12X1.75 ISO M12X1.75 ISO

millimeters)

Grip Range (E) Min. Max. 1,7 3,5 1,7 3,5 3,5 5,0 1,7 4,0 4,0 6,5 1,7 4,5 4,5 6,5 1,7 4,5 4,5 6,5 1,7 4,5 4,5 6,5 2,0 4,5 4,5 7,5

Hole Size

11,25 11,5 13,0 13,0 16,0 17,0 19,0 19,0 21,0 21,0 23,0 26,0 29,0

8,0

1,5

5,0

5,1

9,0

1,5

6,0

10,0

1,5

7,0

12,0

1,5

9,0

14,0

1,5

11,0

15,4

1,5

12,4

12,5

19,0

1,8

16,0

CLOSED END

part numbering system UFO Specifications

Part Number Example: TU-SM5UFO35

TU Product Style: European

S Material S-Steel A-Aluminum SS-304 Stainless Steel

M5 Thread Size

UF 35 O Product Type Grip range O-Open End Smooth Shank X-Closed End Countersunk Head Metric Body Special finish or material available upon request

Grip Range can be affected by parent material and hole size. Sherex recommends trial installations to determine the proper grip range for the application. Closed end sizes available: M4, M5, M6, and M8. Also available with imperial threads - minimum order quantity is 25,000 pieces if not in stock. Contact Sherex for test data.

INSTALLATION TOOLING UFO Series can be installed with our Hand Tools and Hydro-Pneumatic Tools. For additional tooling information see pages 27 & 28.

Phone: 866-474-3739 I Fax: 716-875-0358 I www.sherex.com I E-mail: info@sherex.com

UKO SMALL FLANGE EUROPEAN SERIES

UKO series

metric thread

Part Number (Steel) TU-SM4UKO30 TU-SM5UKO30 TU-SM5UKO55 TU-SM6UKO30 TU-SM6UKO55 TU-SM8UKO30 TU-SM8UKO55 TU-SM10UKO35

(unit -

Thread Size M4X0.7 ISO M5X0.8 ISO M5X0.8 ISO M6X1.0 ISO M6X1.0 ISO M8X1.25 ISO M8X1.25 ISO M10X1.5 ISO

millimeters)

Grip Range (E) Min. Max. 0,5 3,0 0,5 3,0 3,0 5,5 0,5 3,0 3,0 5,5 0,5 3,0 3,0 5,5 0,8 3,5

Hole Size

10,75 12,0 15,0 14,5 16,5 16,0 18,5 19,5

6,5

0,5

6,0

7,5

0,5

7,0

9,5

0,5

9,0

11,5

0,5

11,0

12,9

0,5

12,5

• The UKO series offers a small flange head for near flush installation. • The metric body dimensions allow for use in metric size holes.

CLOSED END

part numbering system UKO Specifications

Part Number Example: TU-SM5UKO30

TU Product Style: European

S M5 Material Thread Size S-Steel A-Aluminum SS-304 Stainless Steel *316-316 Stainless Steel

UK Product Type Smooth Shank Small Flange, Round Body Metric Body

O O-Open End X-Closed End

30 Grip range

Special finish or material available upon request

*316 Stainless Steel has extra corrosion resistance and can be used in the medical, chemical and food industries. Grip Range can be affected by parent material and hole size. Sherex recommends trial installations to determine the proper grip range for the application. Closed End sizes available: M4, M5, M6, and M8. Also available with imperial threads - minimum order quantity is 25,000 pieces if not in stock. Contact Sherex for test data. INSTALLATION TOOLING UKO Series can be installed with our Hand Tools and Hydro-Pneumatic Tools. For additional tooling information see pages 27 & 28.

Phone: 866-474-3739 I Fax: 716-875-0358 I www.sherex.com I E-mail: info@sherex.com

HUPO/ HUKO series

• The HUPO series has a large flange that provides increased strength. • Hexagonal shank body for improved spin out. • The metric body dimensions allow for use in metric holes.

HUPO & HUKO LARGE AND SMALL FLANGE HEXAGONAL EUROPEAN SERIES HUPO SERIES

HUKO SERIES

Part Number Thread Size (Steel) TU-SM4HUPO20 M4X0.7 ISO TU-SM5HUPO30 M5X0.8 ISO TU-SM6HUPO30 M6X1.0 ISO hupo metric thread TU-SM6HUPO55 M6X1.0 ISO TU-SM8HUPO30 M8X1.25 ISO Part Number Thread TU-SM8HUPO55 M8X1.25Size ISO (Steel) TU-SM8HUPO80 M8X1.25 ISO TU-SM10HSPO35 M10X1.5 ISO TU-SM4HUPO20 M4X0.7 ISO TU-SM10HSPO60 M10X1.5 ISO TU-SM5HUPO30 M5X0.8 ISO *TU-SM12HUPO40 M12X1.75 ISO TU-SM6HUPO30 M6X1.0 ISO TU-SM6HUPO55 M6X1.0 ISO TU-SM8HUPO30 M8X1.25 ISO TU-SM8HUPO55 M8X1.25 ISO TU-SM8HUPO80 M8X1.25 ISO TU-SM10HSPO35 M10X1.5 ISO TU-SM10HSPO60 M10X1.5 ISO *TU-SM12HUPO40 M12X1.75 ISO

L HD Grip Range (E) Min. Max. 0,5 2,0 10,0 9,0 0,5 3,0 13,0 10,0 0,5 3,0 14,5 13,0 - millimeters 3,0 5,5 16,5 (unit ) 0,5 3,0 16,5 Grip (E) L HD 3,0 Range 5,5 19,0 16,0 Min. Max. 5,5 8,0 22,0 0,8 3,5 21,0 0,5 2,0 10,0 9,0 19,0 3,5 6,0 23,5 0,5 3,0 13,0 10,0 1,0 4,0 25,0 23,0 0,5 3,0 14,5 13,0 3,0 5,5 16,5 0,5 3,0 16,5 16,0 3,0 5,5 19,0 5,5 8,0 22,0 0,8 3,5 21,0 19,0 3,5 6,0 23,5 1,0 4,0 25,0 23,0

huko metric thread

(unit -

• Hexagonal shank body for improved spin out. • The metric body dimensions allow for use in metric holes.

SS-304 Stainless Steel *316-316 Stainless Steel

Part Number Example: TU-SM5HUKO30 S Material S-Steel SS-304 Stainless Steel *316-316 Stainless Steel

TU Product Style European

Hole Size

1,0 1,0

6,0 7,0

1,5

9,0

HT 1,5

D 11,0

Hole Size 11,0

1,0 2,0 1,0 2,0 1,5

6,0 13,0 7,0 16,0 9,0

1,5

11,0

2,0

13,0

2,0

16,0

Hole Size

6,6

0,6

6,0

7,7

0,6

7,0

9,8

0,7

9,0

HD 11,8

HT 0,7

D 11,0

Hole Size 11,0

13,8 6,6

0,7 0,6

13,0 6,0

7,7

0,6

7,0

9,8

0,7

9,0

millimeters)

Part Number Thread Size Grip Range (E) L (Steel) Min. Max. TU-SM4HUKO20 M4X0.7 ISO 0,5 2,0 11,0 TU-SM5HUKO30 M5X0.8 ISO 0,5 3,0 14,0 TU-SM5HUKO55 M5X0.8 ISO 3,0 5,5 16,5 TU-SM6HUKO30 M6X1.0 ISO 0,5 3,0 16,0 TU-SM6HUKO55 M6X1.0 ISO 3,0 5,5 18,5 TU-SM8HUKO30 M8X1.25Size ISO 0,5 Range 3,0 18,0 Part Number Thread Grip (E) L TU-SM8HUKO55 M8X1.25 ISO 3,0 5,5 20,5 (Steel) Min. Max. TU-SM10HUKO35 M10X1.5 ISO 0,8 3,5 23,0 TU-SM4HUKO20 M4X0.7 ISO 0,5 2,0 11,0 TU-SM5HUKO30 M5X0.8 ISO 0,5 3,0 14,0 part numbering TU-SM5HUKO55 M5X0.8 system ISO 3,0 5,5 16,5 TU-SM6HUKO30 M6X1.0 ISO 0,5 3,0 16,0 HUPO/HUKO Specifications Part Number TU-SM6HUKO55 M6X1.0 Example: ISO 3,0 5,5 18,5 TU-SM5HUPO30 TU-SM8HUKO30 M8X1.25 ISO 0,5 3,0 18,0 M5 TU TU-SM8HUKO55 S M8X1.25 ISO 3,0 5,5 HUP 20,5 Material Thread Size Product Type Product Style TU-SM10HUKO35 M10X1.5 ISO 0,8 3,5 Large Flange 23,0 S-Steel European

• The HUKO series has a smaller flange head that gives a near flush installation into the parent material.

M5 Thread Size

HUPX – CLOSED END

11,8 13,8

11,0 O 0,7 O-Open End 0,7 13,0 X-Closed End

30 11,0 Grip Range

13,0

Flat Head Hexagonal Shank Metic Body *Semi-Hexagonal Shank

HUK 30 O Product Type O-Open End Grip Range Small Flange X-Closed End Round Body Hexagonal Shank Metric Body Special finish or material available upon request

*316 Stainless Steel has extra corrosion resistance and can be used in the medical, chemical and food industries Grip Range can be affected by parent material and hole size. Sherex recommends trial installations to determine the proper grip range for the application. RoHS Compliant Trivalent Plating available upon request. Closed End sizes available: M4, M5, M6, M8. Also available with imperial threads - minimum order quantity is 25,000 pieces if not in stock. Contact Sherex for test data.

INSTALLATION TOOLING HUPO/HUKO Series can be installed with our Hand Tools and Hydro-Pneumatic Tools. For additional tooling information see pages 27 & 28.

HUKX – CLOSED END

Phone: 866-474-3739 I Fax: 716-875-0358 I www.sherex.com I E-mail: info@sherex.com

UPO RS & UFO RS LARGE AND COUNTERSUNK KNURLED EUROPEAN SERIES UPO RS SERIES

UFO RS SERIES

Part Number Thread Size Grip Range (E) D L (Steel) Min. Max. TU-SM4UPO30R M4X0.7 ISO 0,5 3,0 10,75 10,0 TU-SM4UPO45R M4X0.7 ISO 3,0 4,5 12,25 TU-SM5UPO30R M5X0.8 ISO 0,5 3,0 12,0 11,0 TU-SM5UPO55R M5X0.8 ISO 3,0 5,5 15,0 upo rs metric thread (unit - millimeters ) TU-SM6UPO30R M6X1.0 ISO 0,5 3,0 14,5 13,0 Part Number Thread Grip (E) D L TU-SM6UPO55R M6X1.0 Size ISO 3,0 Range 5,5 16,5 (Steel) Min. Max. TU-SM8UPO30R M8X1.25 ISO 0,5 3,0 16,0 16,0 TU-SM8UPO55R M8X1.25 ISO 3,0 5,5 18,5 TU-SM4UPO30R M4X0.7 ISO 0,5 3,0 10,75 10,0 TU-SM10UPO35R M10X1.5 ISO 0,8 3,5 19,75 TU-SM4UPO45R M4X0.7 ISO 3,0 4,5 12,25 18,5 TU-SM10UPO60R M10X1.5 ISO 3,5 6,0 22,75 TU-SM5UPO30R M5X0.8 ISO 0,5 3,0 12,0 11,0 TU-SM5UPO55R M5X0.8 ISO 3,0 5,5 15,0 TU-SM6UPO30R M6X1.0 ISO 0,5 3,0 14,5 13,0 TU-SM6UPO55R M6X1.0 ISO 3,0 5,5 16,5 TU-SM8UPO30R M8X1.25 ISO 0,5 3,0 16,0 16,0 TU-SM8UPO55R M8X1.25 ISO 3,0 5,5 18,5 TU-SM10UPO35R M10X1.5 ISO 0,8 3,5 19,75 18,5 TU-SM10UPO60R M10X1.5 ISO 3,5 6,0 22,75 ufo rs metric thread

(unit -

b+01

Hole Size

0,75

6,4

6,3

1,0

7,4

7,3

1,5 K

+01 b9,4

9,3Size Hole

1,5 0,75 2,25 1,0

11,5 6,4 13,0 7,4

11,4 6,3 12,9 7,3

1,5

9,4

9,3

1,5

11,5

11,4

2,25

13,0

12,9

b+01

Hole Size

1,5

6,4

6,3

1,5

7,4

7,3

1,5 K

+01 b9,4

9,3Size Hole

1,5 1,5 1,5 1,5

11,5 6,4 13,0 7,4

11,4 6,3 12,9 7,3

1,5

9,4

9,3

1,5

11,5

11,4

13,0

R 12,9 Ribbed

millimeters)

Part Number Thread Size Grip Range (E) L D (Steel) Min. Max. TU-SM4UFO35R M4X0.7 ISO 1,7 3,5 11,5 9,0 TU-SM4UFO50R M4X0.7 ISO 3,5 5,0 13,0 TU-SM5UFO40R M5X0.8 ISO 1,7 4,0 13,0 10,0 TU-SM5UFO65R M5X0.8 ISO 4,0 6,5 16,0 TU-SM6UFO45R M6X1.0 ISO 1,7 4,5 17,0 12,0 Part Number Thread Grip (E) L D TU-SM6UFO65R M6X1.0 Size ISO 4,5 Range 6,5 19,0 (Steel) Min. Max. TU-SM8UFO45R M8X1.25 ISO 1,7 4,5 19,0 14,0 TU-SM8UFO65R M8X1.25 ISO 4,5 6,5 21,0 TU-SM4UFO35R M4X0.7 ISO 1,7 3,5 11,5 9,0 TU-SM10UFO45R M10X1.5 ISO 1,7 4,5 21,0 TU-SM4UFO50R M4X0.7 ISO 3,5 5,0 13,0 15,4 TU-SM10UFO65R M10X1.5 ISO 4,5 6,5 23,0 TU-SM5UFO40R M5X0.8 ISO 1,7 4,0 13,0 10,0 TU-SM5UFO65R M5X0.8 ISO 4,0 6,5 16,0 TU-SM6UFO45R M6X1.0 ISO 1,7 4,5 17,0 part numbering system 12,0 TU-SM6UFO65R M6X1.0 ISO 4,5 6,5 19,0 UPO RS/UFO RS Specifications TU-SM8UFO45R M8X1.25 Part ISONumber1,7 4,5 19,0 Example: TU-SM5UPO30R 14,0 TU-SM8UFO65R M8X1.25 ISO 4,5 6,5 21,0 S M5 TU TU-SM10UFO45R M10X1.5 ISO 1,7 4,5 UP 21,0 15,4 Material Thread Size Product Type Product Style: TU-SM10UFO65R M10X1.5 ISO 4,5 6,5 23,0 Flat Head Large Flange, S-Steel European

O 1,5 End O-Open

series

• The UPO RS series has a large flange that provides increased strength and better containment of round or oversized holes. • Unique knurling increases spin out resistance in soft materials.

• The UFO RS has a countersunk head style for flush installations. • Unique knurling increases spin out resistance.

Metic Body

Part Number Example: SM5UFO40R TU Product Style: European

UPO RS/ UFO RS

S Material S-Steel

M5 Thread Size

UF Product Type Smooth Shank Countersunk Head Metric Body

O O-Open End

R Ribbed

Special finish or material available upon request Grip Range can be affected by parent material and hole size. Sherex recommends trial installations to determine the proper grip range for the application. RoHS Compliant Trivalent Plating available upon request. Also available with imperial threads - minimum order quantity is 25,000 pieces if not in stock. Contact Sherex for test data. INSTALLATION TOOLING UPO RS/ UFO RS Series can be installed with our Hand Tools and Hydro-Pneumatic Tools. For additional tooling information see pages 27 & 28.

Phone: 866-474-3739 I Fax: 716-875-0358 I www.sherex.com I E-mail: info@sherex.com

UKO AND HUKO IMPERIAL THREAD SERIES - STAINLESS STEEL

UKO/ HUKO INCH

series

Thread Size Grip Range (E) Part Number (304 Stainless Steel) Min. Max. TU-SS1032UKO30 10-32 UNF .020 .118 TU-SS2520UKO30 UNC .020 unit .118 uko unified 1/4-20 thread TU-SS3118UKO30 5/16-18 UNC .020 .118

(

Thread Size

Part Number (304 Stainless Steel) TU-SS1032UKO30 TU-SS2520UKO30 TU-SS3118UKO30

• UKO inch series has a smaller flange head that gives a near flush installation.

10-32 UNF 1/4-20 UNC 5/16-18 UNC

Grip Range (E) Min. Max. .020 .118 .020 .118 .020 .118

0.472 0.295 0.571 0.374 inches 0.630 0.453

Diameter - Inch +0,1 (b )

Diameter - Metric +0,1 (b )

Hole Size

.020

0.276 0.354 0.433

7,0 9,0 11,0

0.276 0.354 0.433

) .020 .020

Diameter - Inch +0,1 (b )

Diameter - Metric +0,1 (b )

Hole Size

0.472 0.571 0.630

0.295 0.374 0.453

.020 .020 .020

0.276 0.354 0.433

7,0 9,0 11,0

0.276 0.354 0.433

• Round shank body. • Dimensions in inches.

R 0.3

huko unified thread • HUKO inch series has a smaller flange head that gives a near flush installation. • Hexagonal shank body. • Dimensions in inches.

10-32 UNF 1/4-20 UNC 5/16-18 UNC

Grip Range (E) Min. Max. .020 .118 .020 .118 .020 .118

Thread Size Part Number (304 Stainless Steel) TU-SS1032HUKO30 10-32 UNF part numbering TU-SS2520HUKO30 1/4-20 UNC TU-SS3118HUKO30 5/16-18 UNC

Grip Range (E) Min. Max. .020 .118 system .020 .118 .020 .118

Part Number (304 Stainless Steel) TU-SS1032HUKO30 TU-SS2520HUKO30 TU-SS3118HUKO30

Thread Size

(unit -

UKO/HUKO Specifications

Diameter - Inch +0,1 (b )

Diameter - Metric +0,1 (b )

Hole Size

0.472 0.571 0.630

0.295 0.374 0.453

.020 .020 .020

0.276 0.354 0.433

7,0 9,0 11,0

0.276 0.354 0.433

Diameter - Inch +0,1 (b )

Diameter - Metric +0,1 (b )

Hole Size

0.472 0.571 0.630

0.295 0.374 0.453

.020 .020 .020

0.276 0.354 0.433

7,0 9,0 11,0

0.276 0.354 0.433

Part Number Example: SS1032HUKO30

SS Material SS-304 Stainless Steel *316-316 Stainless Steel

TU Product Style European

inches)

1032 Thread Size

HUK Product Type Small Flange Hexagonal Shank Inch Body

O O-Open End X-Closed End

30 Grip Range

Special finish or material available upon request

*316 Stainless Steel has extra corrosion resistance and can be used in the medical, chemical and food industries Grip Range can be affected by parent material and hole size. Sherex recommends trial installations to determine the proper grip range for the application. RoHS Compliant Trivalent Plating available upon request. Also available with imperial threads - minimum order quantity is 25,000 pieces if not in stock. Contact Sherex for test data.

INSTALLATION TOOLING UKO/HUKO Inch Series can be installed with our Hand Tools and Hydro-Pneumatic Tools. For additional tooling information see pages 27 & 28.

Phone: 866-474-3739 I Fax: 716-875-0358 I www.sherex.com I E-mail: info@sherex.com

CLM & CKM LARGE & SMALL FLANGE KNURLED METRIC BODY SERIES

Part Number Thread Size Grip Range (Steel) Min. Max. CLM2-470-3.0 M4X0.7 ISO 0.25 3.00 CLM2-580-3.0 M5X0.8 ISO 0.25 3.00 clm metric thread CLM2-610-3.0 M6X1.0 ISO 0.50 (unit 3.00 CLM2-8125-3.0 M8X1.25 ISO 0.50 3.00 CLM2-1015-3.5 M10X1.5Size ISO 0.50 3.50 Part Number Thread Grip Range (Steel) Min. Max. CLM2-470-3.0 M4X0.7 ISO 0.25 3.00 CLM2-580-3.0 M5X0.8 ISO 0.25 3.00 CLM2-610-3.0 M6X1.0 ISO 0.50 3.00 CLM2-8125-3.0 M8X1.25 ISO 0.50 3.00 CLM2-1015-3.5 M10X1.5 ISO 0.50 3.50

ckm metric thread Part Number Thread Size (Steel) CKM2-470-3.0 M4X0.7 ISO CKM2-580-3.0 M5X0.8 ISO CKM2-610-3.0 M6X1.0 ISO CKM2-8125-3.0 M8X1.25 ISO CKM2-1015-3.5 M10X1.5Size ISO Part Number Thread (Steel) CKM2-470-3.0 M4X0.7 ISO CKM2-580-3.0 M5X0.8 ISO part numbering CKM2-610-3.0 M6X1.0 ISO CKM2-8125-3.0 M8X1.25 ISO CLM/CKM Specifications CKM2-1015-3.5 M10X1.5 ISO Material: Steel 1008/1010

L HD HT Nom. Min. Max. ± .13 11.5 8.62 9.38 0.75 10.38 13.0 9.62 1.00 -16.0 millimeters 12.62 13.38 ) 1.50 17.5 15.62 16.38 1.50 22.0 18.12HD18.88 2.25 L HT Nom. Min. Max. ± .13 11.5 8.62 9.38 0.75 10.38 13.0 9.62 1.00 16.0 12.62 13.38 1.50 17.5 15.62 16.38 1.50 22.0 18.12 18.88 2.25

(unit -

CLM Product Style Finish: Zinc Plated-Yellow Dichromate Large Flange per ASTM B633 Fe/Zn 8, Type II Knurled Body Metric Body RoHS Compliant: Zinc Plated-Clear Trivalent Chromate CKM per Sherex SFS-01-001 Product Style Small Flange Knurled Body Metric Body

IL Ref. 7.10 7.90 9.40 11.00 14.50 IL Ref. 7.10 7.90 9.40 11.00 14.50

Hole Size +.10/-.000 6.00 7.00 9.00 11.00 13.00 Hole Size +.10/-.000 6.00 7.00 9.00 11.00 13.00

D Max. 5.95 6.95 8.95 10.95 12.95 D Max. 5.95 6.95 8.95 10.95 12.95

IL Ref. 7.10 7.90 9.40 11.00 14.50 IL Ref. 7.10 7.90 9.40 11.00 14.50

Hole Size +.10/-.000 6.00 7.00 9.00 11.00 13.00 Hole Size +.10/-.000 6.00 7.00 9.00 11.00 13.00

• The CLM series is the true metric version of the CAL series.

millimeters)

Grip Range L Min. Max. Nom. 0.25 3.00 11.3 0.25 3.00 12.7 0.50 3.00 15.3 0.50 3.00 17.3 0.50 3.50 20.4 Grip Range L Min. Max. Nom. 0.25 3.00 11.3 0.25 3.00 12.7 system 0.50 3.00 15.3 0.50Part Number 3.00 17.3 0.50Example: 3.50CLM2-610-3.0 20.4

Aluminum 5056

D Max. 5.95 6.95 8.95 10.95 12.95 D Max. 5.95 6.95 8.95 10.95 12.95

CLM/ CKM series

HD Min. Max. 6.70 7.20 7.70 8.20 9.70 10.20 11.62 12.38 13.62HD14.38 Min. Max. 6.70 7.20 7.70 8.20 9.70 10.20 11.62 12.38 13.62 14.38

HT ± .13 0.46 0.46 0.50 0.63 0.80 HT ± .13 0.46 0.46 0.50 0.63 0.80

2 Material 2-Steel 3-Aluminum

610 Thread Size

3.0 Grip Range

(_) Empty-Open End B-Closed End T-Trivalent

2 Material 2-Steel 3-Aluminum

610 Thread Size

3.0 Grip Range

(_) Empty-Open End B-Closed End T-Trivalent

• The CKM series is the true metric version of the CAK series.

Special finish or material available upon request

Grip range can be affected by parent material and hole size. Sherex recommends trial installations to determine the proper grip range for the application. Contact Sherex for details. CLM & CKM style rivet nut specials available upon request. Contact Sherex for test data. INSTALLATION TOOLING CLM/CKM Series can be installed with our Hand Tools, and Hydro-Pneumatic Tools. For additional tooling information see pages 26 & 28.

Sherex rivet nuts are compatible with the following hardware: GRADE 2, GRADE 5, CLASS 8.8 and CLASS 9.8 Please contact Sherex when using other grade fasteners.

Phone: 866-474-3739 I Fax: 716-875-0358 I www.sherex.com I E-mail: info@sherex.com

SHEREX CR/CRE SERIES CR/CRE series

plating: cr and cre series

Corrosion Resistant - Long Life Plating Options CR SERIES • Proprietary Zinc Nickel Plating • CR Series is certified to over 1,000 hrs of corrosion protection before red rust • Available on all rivet nuts in silver (standard), black, or yellow CRE SERIES • Proprietary Zinc Plating • More economical for lower corrosion resistant requirements • CRE Series is certified to over 500 hrs of corrosion protection before red rust • Available in silver (standard) or black RoHS REQUIREMENTS • The CR & CRE Series are RoHS compliant • Our plating process contains neither hexavalent nor trivalent chromate • This saves cost as now there is no need to test for hexavalent presence Corrosion Protection 4000 Hours

3000 2000 1000 0

Zinc Plated Dicromate Steel

Anodized Aluminum

CRE Series

CR Series

304 Stainless Steel

Material Additional information and Sherex white paper available at www.sherex.com RoHS Requirements The CR and CRE Series are RoHS Compliant. Our plating process contains neither hexavalent nor trivalent chromate. This saves cost as now there is no need to test for hexavalent presence. Ordering & Inquires When inquiring about the CR and CRE Series finishes, simply replace the first 2 letters of the part number with CR or CRE. Example: CAL2-2520-165 becomes CREL2-2520-165 For non-standard finish, contact Sherex for ordering details. Sherex CR Black = CRB, Sherex CR Yellow = CRY, Sherex CRE Black = CREB

Phone: 866-474-3739 I Fax: 716-875-0358 I www.sherex.com I E-mail: info@sherex.com

SHEREX LOCSERT® SHEREX LOCSERT®

Sherex Locsert® is a proprietary adhesive that is pre-applied under the head of the rivet nut. When installed, the adhesive bonds the rivet nut to the base material which greatly increases the force required to spin the rivet nut. This is commonly referred to as, “spin out.”

adhesive activates during installation bonding rivet nut to base material

product features and benefits

• • • • •

Base material must be a ferrous or non-ferrous metal. Base material should not be painted or powder coated (finish will reduce performance). Base material should be as clean as possible prior to rivet nut installation. Hole should be relatively free of burrs. Bonding begins immediately, but allow 2-3 hours for approximately 75% curing. Locsert® will be fully cured within 24 hours. • Locsert® performance will improve 20-30% when post bake associated with e-coat, powdercoat or paint finish is performed AFTER Locsert® installation. Base Material: 1018 steel, 70HRB, .063 thickness Part Number

Spin Out (in./lbs)

As Locsert®

Set Time

CAL 2-252 0-16 5

42.9 0

90.0 8

3 hours

For additional testing data, please contact Sherex

SHEREX SEAL 2 SEALING SYSTEM

SEAL 2 sealing system

Sherex Seal 2 has been designed for use in applications where it is necessary to seal fluid or air leakage from under the head. Seal 2 provides greater performance over conventional sealing materials such as PVC foam.

benefits

• • • • •

Resistant to automotive fluids. Can withstand temperatures up to 150° C. Has been pressure tested to 160 psi of backside pressure with no leakage. Seal 2 processed rivet nuts can be installed into any finished materials. Seal 2 can pass through a paint bake or other baking process for up to 30 minutes with no reduction in sealing capabilities. • Can be applied to a standard rivet nut.

Phone: 866-474-3739 I Fax: 716-875-0358 I www.sherex.com I E-mail: info@sherex.com

RIV-FLOAT® RIV-FLOAT®

• Ensure easy, accurate, and fast attachment of components in off center applications.

STANDARD RIVET NUT INSTALLED

CROSS SECTION OF RIV-FLOAT® INSTALLED

features and benefits

• Floating nut aligns to drive angle of screw eliminating cross threading and spin out • Allows for installation in post painted or powder coat applications where weld nuts or cage nuts are typically used • RoHS compliant Zinc electroplate to 8µm with trivalentchromate - 96/240 • Designed with higher thread strength than regular rivet nuts • Mechanically locked RIV-FLOAT® is available with prevailing torque feature to IFI spec 100/107 • Installed with MS 50 hydro-pneumatic tool with RIV-FLOAT® nose piece

INSTALLED

UNINSTALLED

rfk inch/metric small flange thread sizes Part Number Part InchNumber (Steel)

InchNumber (Steel) Part Part Number RFK2-0832-130 Inch (Steel) Inch (Steel) RFK2-0832-130 RFK2-1032-150 RFK2-1032-150 RFK2-0832-130 RFK2-2520-150 RFK2-0832-130 RFK2-2520-150 RFK2-1032-150 RFK2-1032-150 RFK2-2520-150 RFK2-2520-150 Part Number Part Number Metric (Steel)

Metric (Steel) Part Number Part Number RFK2-470-3.3 Metric (Steel) Metric (Steel) RFK2-470-3.3 RFK2-580-3.8 RFK2-580-3.8 RFK2-470-3.3 RFK2-610-3.8 RFK2-470-3.3 RFK2-610-3.8 RFK2-580-3.8 RFK2-580-3.8 RFK2-610-3.8 RFK2-610-3.8

Thread Size Thread Size Thread Size 8-32 UNC Thread Size 8-32 UNC 10-32 UNF 10-32 UNF 8-32 UNC 1/4-20 UNC 8-32 UNC 1/4-20 UNC 10-32 UNF 10-32 UNF 1/4-20 UNC 1/4-20 UNC Thread Size Thread Size Thread M4x0.7 Size ISO Thread Size M4x0.7 ISO M5X0.8 ISO M5X0.8 M4x0.7 ISO ISO M6x1.0 M4x0.7 ISO M6x1.0 M5X0.8 ISO ISO M5X0.8 ISO M6x1.0 ISO M6x1.0 ISO

Radial Radial Deflection

Deflection Radial Radial 0.020 Deflection Deflection 0.020 0.015 0.015 0.020 0.030 0.020 0.030 0.015 0.015 0.030 0.030 Radial

Radial Deflection Deflection Radial Radial 0.51 Deflection Deflection 0.51 0.38 0.38 0.51 0.76 0.51 0.76 0.38 0.38 0.76 0.76

Grip Range Grip Range Min. Max. Grip Range Grip Range Min. Max. 0.027 .130 Min. Max. Min. Max. 0.027 .130 0.027 .150

0.027 .150 .130 0.027 .150 0.027 .130 0.027 .150 0.027 .150 0.027 .150 0.027 .150 Grip Range 0.027 .150 Grip Range Min. Max. Grip Range Grip Range Min. Max. 0.7 3.3 Min. Max. Min. Max. 0.7 3.3 0.7 3.8 0.7 0.7 0.7 0.7 0.7 0.7 0.7 0.7

3.8 3.3 3.8 3.3 3.8 3.8 3.8 3.8 3.8

L L ± .0215 L L ± .0215 ±.7195 .0215 ±.7195 .0215 .7195 .7195 .7195 .8190 .7195 .8190 .7195 .7195 .8190 L .8190 L ± .55 L L ± .55 18.28 ± .55 ± .55 18.28 18.28 18.28 18.28 20.80 18.28 20.80 18.28 18.28 20.80 20.80

HD HD ± .010 HD ± HD .010 ±.455 .010 ±.455 .010 .455 .455 .455 .595 .455 .595 .455 .455 .595 HD .595 HD ± .25 HD ±HD .25 11.56 ± .25 ± .25 11.56 11.56 11.56 11.56 15.11 11.56 15.11 11.56 11.56 15.11 15.11

HT HT ± .002 HT HT ± .002 ±.022 .002 ±.022 .002 .022 .022 .022 .022 .022 .022 .022 .022 HT .022 HT ± .05 HT ±HT .05 ±0.55 .05 ±0.55 .05 0.55

Hole Size Hole Size +.006/-.000 Hole Size Hole Size +.006/-.000 .391 +.006/-.000 +.006/-.000 .391 .391

0.55 0.55 0.55 0.55 0.55 0.55 0.55 0.55

.390 .390 .530 .390 .530 .390 .390 .530 D .530 D Max. D D Max. 9.91 Max. Max. 9.91 9.91

9.91 9.91 13.46 9.91 13.46 9.91 9.91 13.46 13.46

IL IL Ref. IL IL Ref. .522 Ref. Ref. .522 .522 .522 .522 .630 .522 .630 .522 .522 .630 IL .630 IL Ref. IL IL Ref. 13.25 Ref. Ref. 13.25 13.25

Grip Range L HDsizes HT rfl inch/metric large flange thread Radial Part Number Part InchNumber (Steel) InchNumber (Steel) Part Part Number Inch (Steel) RFL2-0832-130 Inch (Steel) RFL2-0832-130 RFL2-1032-150 RFL2-1032-150 RFL2-0832-130 RFL2-0832-130 RFL2-2520-150 RFL2-2520-150 RFL2-1032-150 RFL2-1032-150 RFL2-2520-150 RFL2-2520-150 Part Number Part Number Metric (Steel)

Metric (Steel) Part Number Part Number Metric (Steel) RFL2-470-3.3 Metric (Steel) RFL2-470-3.3 RFL2-580-3.8 RFL2-580-3.8 RFL2-470-3.3 RFL2-470-3.3 RFL2-610-3.8 RFL2-610-3.8 RFL2-580-3.8 RFL2-580-3.8 RFL2-610-3.8 RFL2-610-3.8

Thread Thread Size

Size Thread Thread Size Size

Thread Size Thread Size

Thread Size Thread Size 8-32 UNC 8-32 UNC 10-32 UNF 10-32 UNF 8-32 UNC 8-32 UNC 1/4-20 UNC 1/4-20 UNC 10-32 UNF 10-32 UNF 1/4-20 UNC 1/4-20 UNC Thread Size Thread Size Thread Size Thread M4x0.7 Size ISO M4x0.7 ISO M5x0.8 ISO M5x0.8 M4x0.7 ISO M4x0.7 ISO M6x1.0 M6x1.0 M5x0.8 ISO M5x0.8 ISO M6x1.0 ISO M6x1.0 ISO

Material Material Thickness Thickness

Radial Deflection Deflection Radial Radial Deflection 0.020 Deflection 0.020 0.015 0.015 0.020 0.020 0.030 0.030 0.015 0.015 0.030 0.030 Radial Radial Deflection

Deflection Radial Radial Deflection 0.51 Deflection 0.51 0.38 0.38 0.51 0.51 0.76 0.76 0.38 0.38 0.76 0.76

Pull Out Pull Out

D D Max. D D Max. .390 Max. Max. .390 .390

Pull Out Pull Out

10.00 10.00 13.50 10.00 13.50 10.00 10.00 13.50 13.50

Grip Range Min. Max. Grip Range Grip Range Min. Max.

L ± .0215 L L ± .0215

HD ± HD .010 ± HD .010

HT ± .003 HT HT ± .003

D D Max. D D Max.

IL IL Ref. IL IL Ref.

Hole Size Hole Size +.006/-.000 Hole Size Hole Size +.006/-.000

.027 .130 Min. Max. Min. Max. .027 .130 .027 .150 .027 .150 .130 .130 .027 .150 .027 .150 .027 .150 .027 .150 Grip .027 Range .150 Grip Range Min. Max. Grip Range Grip Range Min. Max.

±.7195 .0215 ±.7195 .0215 .7195 .7195 .7195 .8190 .8190 .7195 .7195 .8190 L .8190 L ± .55 L L ± .55

±.500 .010 ±.500 .010 .500 .500 .500 .685 .685 .500 .500 .685 HD .685 HD ±HD .25 ±HD .25

±.030 .003 ±.030 .003 .030 .030 .030 .035 .035 .030 .030 .035 HT .035 HT ±HT .08 ±HT .08

.390 Max. Max. .390 .390 .390 .390 .530 .530 .390 .390 .530 D .530 D Max. D D Max.

.522 Ref. Ref. .522 .522 .522 .522 .630 .630 .522 .522 .630 IL .630 IL Ref. IL IL Ref.

.391 +.006/-.000 +.006/-.000 .391 .391 .391 .391 .391 .391 .391 Hole Size .391 Hole Size +.15/-.000 Hole Size Hole Size +.15/-.000

18.28 ± .55 ± .55 18.28 18.28 18.28 18.28 20.80 20.80 18.28 18.28 20.80 20.80

12.70 ± .25 ± .25 12.70 12.70 12.70 12.70 17.40 17.40 12.70 12.70 17.40 17.40

±0.76 .08 ±0.76 .08 0.76 0.76 0.76 0.89 0.89 0.76 0.76 0.89 0.89

9.91 Max. Max. 9.91 9.91 9.91 9.91 13.46 13.46 9.91 9.91 13.46 13.46

13.25 Ref. Ref. 13.25 13.25 13.25 13.25 16.00 16.00 13.25 13.25 16.00 16.00

10.00 +.15/-.000 +.15/-.000 10.00 10.00 10.00 10.00 13.50 13.50 10.00 10.00 13.50 13.50

0.7 Min. Min. 0.7 0.7 0.7 0.7 0.7 0.7 0.7 0.7

3.3 Max. Max. 3.3 3.8 3.8 3.3 3.3 3.8 3.8 3.8 3.8 3.8

® Failure Mode RIV-FLOAT is patent pending

Failure Mode (Pull Out)

Torque Out Torque Out

Failure Mode (Pull Out) (Pull Out)

Torque Out Torque Out

Failure Mode Failure Mode (Torque Out)

Material (Steel)866-474-3739 I Failure Material Phone: Fax: I www.sherex.com I (Pull716-875-0358 Out) (Torque Out) Mode Failure Mode (Steel) Thickness Thickness (Steel)

13.25 13.25 16.00 13.25 16.00 13.25 13.25 16.00 16.00

.391 .391 .531 .391 .531 .391 .391 .531 Hole Size .531 Hole Size +.15/-.000 Hole Size Hole Size +.15/-.000 10.00 +.15/-.000 +.15/-.000 10.00 10.00

Failure Mode (Torque Out) (Torque Out)

Suggested Suggested Assembly Torque Assembly Torque Suggested Grade 5 Suggested E-mail:Assembly info@sherex.com Grade 5 Torque Class 8.8 Assembly Torque Class Grade8.8 5 Grade 5

Part Number Metric (Steel)

Grip Range

Radial

Thread Size

Hole Size

RIV-FLOAT®

Deflection

Min.

Max.

± .55

± .25

± .08

Max.

Ref.

+.15/-.000

RFL2-470-3.3

M4x0.7 ISO

0.51

0.7

3.3

18.28

12.70

0.76

9.91

13.25

10.00

RFL2-580-3.8

M5x0.8 ISO

0.38

0.7

3.8

18.28

12.70

0.76

9.91

13.25

10.00

RFL2-610-3.8

M6x1.0 ISO

0.76

0.7

3.8

20.80

17.40

0.89

13.46

16.00

13.50

RIV-FLOAT®

test data Thread Size

Suggested

Material Thickness

Failure Mode

Pull Out

(Pull Out)

(Steel)

# 8-32 UNC # 10-32 UNF 1/4-20 UNC M4x0.7 ISO M5x0.8 ISO M6x1.0 ISO

Failure Mode

Torque Out

Assembly Torque

(Torque Out)

Grade 5 Class 8.8

.130"

2205 lbf

Bolt Breaks

71 in-lb

Bolt Breaks

® 3530 lbf Bolt Breaks 128Tool in-lb Installation Bolt Breaks RIV FLOAT Rivet Nut Hand ® .150" 5510 lbf Bolt Breaks 265 in-lb Bolt Breaks Kit Pricing RIV FLOAT Rivet Nut Hand Tool Installation 3.3 mm 1000 kgf Bolt Breaks 9 N•m Bolt Breaks Kit Pricing .150"

22.0 in-lb 36.0 in-lb 75.0 in-lb 2.5 N•m

3.8 mm

1900 kgf

Bolt Breaks

21 N•m

Bolt Breaks

5.0 N•m

3.8 mm

2500 kgf

Bolt Breaks

30 N•m

Bolt Breaks

8.6 N•m

RIV-FLOAT® Rivet Nut Hand Tool Kits Part Number: Tools Sizes: Part Number:30 Tools Sizes: 30 Rivet Nuts: 30 20 Rivet Nuts:

6-32 / 8-32 10-32 / ¼-20 Inch Kit Metric Kit Mini Inch Kit Mini Inch Kit RNHT RF INCH KIT RNHT RF METRIC KIT RNHT 6-32/8-32 MINI KIT RNHT 10-32/2520 MINI KIT 6-32RF / 8-32 10-32 RF / ¼-20 Inch Kit Metric Kit 6-32 to ¼-20 M4 to M6 ¼-28Inch Kit 10-32Mini and Inch ¼-20Kit Mini piecesRNHT of RFL2-0632-130 30 pieces of RF RFL2-470-3.3 of RFL2-0632-130 pieces10-32/2520 of RFL2-1032-150 RF INCH KIT RNHT METRIC KIT 20 pieces RNHT 6-32/8-32 RF MINI KIT 20RNHT RF MINI KIT pieces of6-32 RFL2-0832-130 30 pieces of M4 RFL2-580-3.8 20 pieces of RFL2-0832-130 10 pieces 10-32 of RFL2-2520-150 to ¼-20 to M6 ¼-28 and ¼-20 pieces of RFL2-1032-150 of RFL2-610-3.8 30 pieces of RFL2-0632-130 20 pieces 30 pieces of RFL2-470-3.3 20 pieces of RFL2-0632-130 20 pieces of RFL2-1032-150 pieces of RFL2-2520-150 30 pieces of RFL2-0832-130 30 pieces of RFL2-580-3.8 20 pieces of RFL2-0832-130 10 pieces of RFL2-2520-150 tool comes with an extra mandrel 30 pieces of RFL2-1032-150 Each 20 pieces of RFL2-610-3.8 20 pieces of RFL2-2520-150

Each tool comes with an extra mandrel

RIV FLOAT®MECHANICALLY Rivet Nut LOCKED HandPARTS Tool Installation Mechanically Locked Mechanically Locked Inch Kit Metric Kit Bag Pricing LOCKED PARTS ® MECHANICALLY RIV Part FLOAT Tool Number: Rivet RNHT RF Nut ML INCHHand KIT RNHT RF MLInstallation METRICLocked KIT Mechanically Locked Mechanically Tools Sizes: ¼-28 ¼-28 Inch Kit Metric Kit Bag Pricing SH-22-0632 pieces RF of SH-22-470 Part Number:20 pieces RNHTofRF ML INCH KIT 20 RNHT ML METRIC KIT Rivet Nuts: 20 pieces of SH-22-580 Tools Sizes: 20 pieces of SH-22-0832 ¼-28 ¼-28 20 pieces of SH-22-1032 20 pieces of SH-22-0632 20 pieces of SH-22-470 Each tool comes with an extra mandrel Rivet Nuts: 20 pieces of SH-22-0832 20 pieces of SH-22-580 20 pieces of SH-22-1032

Each tool comes with an extra mandrel Contact Sherex for availability and lead times Private label available upon request Contact Sherex for availability and lead times Private label available upon request

RIV-FLOAT® Rivet Nut Hand Tool Bag Part Number: Tools Sizes: Rivet Nuts: Part Number: Tools Sizes: Rivet Nuts:

6-32 BAG RNHT-0632RF BAG ¼-28 6-32 BAG 15 pieces of RFL2-0632-130 RNHT-0632RF BAG ¼-28 15 pieces of RFL2-0632-130 Part Number: Tools Sizes: Rivet Nuts: Part Number: Tools Sizes: Rivet Nuts:

8-32 BAG 10-32 BAG RNHT-0832RF BAG RNHT-1032RF BAG ¼-28 10-32 8-32 BAG 10-32 BAG 15 pieces of RFL2-0832-130 15 pieces of RFL2-1032-150 RNHT-0832RF BAG RNHT-1032RF BAG Each tool comes with an extra mandrel ¼-28 10-32 15 pieces of RFL2-0832-130 15 pieces of RFL2-1032-150

Each tool comes with an M5 extraBAG mandrel M4 BAG RNHT-M4RF BAG RNHT-M5RF BAG ¼-28 M5 M4 M5 15 pieces of BAG RFL2-470-3.3 15 pieces of BAG RFL2-580-3.8 RNHT-M4RFEach BAG tool comes with RNHT-M5RF BAG an extra mandrel ¼-28 M5 15 pieces of RFL2-470-3.3 15 pieces of RFL2-580-3.8

¼-20 BAG RNHT-2520RF BAG ¼-20 ¼-20 BAG 10 pieces of RFL2-2520-150 RNHT-2520RF BAG ¼-20 10 pieces of RFL2-2520-150

M6 BAG RNHT-M6RF BAG M6 M6 10 pieces of BAG RFL2-610-3.8 RNHT-M6RF BAG M6 10 pieces of RFL2-610-3.8

Each tool comes with an extra mandrel Sherex Fastening Solutions ~ 400 Riverwalk Pkwy, Suite 600 ~ Tonawanda, NY 14150 8664 74 3739 ~ www.sherex.com MECHANICALLY LOCKED PARTS Pricing effective March, 2009 Sherex Mechanically Fastening Solutions ~ 400 Riverwalk Pkwy, Suite 600 ~ Tonawanda, NY 14150 Locked Locked Mechanically Mechanically Locked 8664 74 3739 ~ www.sherex.com 6-32 BAG 8-32 BAG 10-32 BAG Pricing effective March, 2009 MECHANICALLY LOCKED PARTS Part Number: RNHT-0632RF ML BAG RNHT-0832RF ML BAG RNHT-1032RF ML BAG Mechanically Mechanically Mechanically Tools Sizes: ¼-28 Locked ¼-28 Locked ¼-28 Locked 6-32 8-32 10-32 BAG Rivet Nuts: 15 pieces of BAG SH-22-0632 15 pieces of BAG SH-22-0832 15 pieces of SH-22-1032 Part Number: RNHT-0632RF Each ML BAG RNHT-0832RF ML BAG RNHT-1032RF ML BAG tool comes with an extra mandrel Tools Sizes: ¼-28 ¼-28 ¼-28 Rivet Nuts: 15 pieces of SH-22-0632 15 pieces of SH-22-0832 15 pieces of SH-22-1032 MECHANICALLY LOCKED PARTS

Each tool comes with an extra mandrel Mechanically Locked Mechanically Locked M4 BAG

Part Number: Tools Sizes: Rivet Nuts: Part Number: Tools Sizes: Rivet Nuts:

M5 BAG

MECHANICALLY LOCKED PARTS RNHT-M4RF ML BAG RNHT-M5RF ML BAG

Mechanically Mechanically ¼-28 Locked ¼-28 Locked M4 of BAG M5 of BAG 15 pieces SH-22-470 15 pieces SH-22-580 RNHT-M4RF MLwith BAGan extra mandrel RNHT-M5RF ML BAG Each tool comes ¼-28 ¼-28 15 pieces of SH-22-470 15 pieces of SH-22-580

Each tool comes with an extra mandrel Contact Sherex for availability and lead times Private label available uponand request Contact Sherex for availability lead times

PrivateSherex label for available upon request Contact availability and lead times ® Private label available upon request RIV-FLOAT is patent pending

Phone: 866-474-3739 I Fax: 716-875-0358 I www.sherex.com I E-mail: info@sherex.com

UFO

UFO COUNTERSUNK HEAD EUROPEAN SERIES

series

• The UFO series offers a contersunk head for flush installation into the parent materials. • The metric body dimensions allow for use in metric holes.

metric thread

Part Number (Steel) TU-SM3UFO35 TU-SM4UFO35 TU-SM4UFO50 TU-SM5UFO40 TU-SM5UFO65 TU-SM6UFO45 TU-SM6UFO65 TU-SM8UFO45 TU-SM8UFO65 TU-SM10UFO45 TU-SM10UFO65 TU-SM12UFO45 TU-SM12UFO75

(unit -

Thread Size M3X0.5 ISO M4X0.7 ISO M4X0.7 ISO M5X0.8 ISO M5X0.8 ISO M6X1.0 ISO M6X1.0 ISO M8X1.25 ISO M8X1.25 ISO M10X1.5 ISO M10X1.5 ISO M12X1.75 ISO M12X1.75 ISO

millimeters)

Grip Range (E) Min. Max. 1,7 3,5 1,7 3,5 3,5 5,0 1,7 4,0 4,0 6,5 1,7 4,5 4,5 6,5 1,7 4,5 4,5 6,5 1,7 4,5 4,5 6,5 2,0 4,5 4,5 7,5

Hole Size

11,25 11,5 13,0 13,0 16,0 17,0 19,0 19,0 21,0 21,0 23,0 26,0 29,0

8,0

1,5

5,0

5,1

9,0

1,5

6,0

10,0

1,5

7,0

12,0

1,5

9,0

14,0

1,5

11,0

15,4

1,5

12,4

12,5

19,0

1,8

16,0

CLOSED END

part numbering system UFO Specifications

Part Number Example: TU-SM5UFO35

TU Product Style: European

S Material S-Steel A-Aluminum SS-304 Stainless Steel

M5 Thread Size

UF 35 O Product Type Grip range O-Open End Smooth Shank X-Closed End Countersunk Head Metric Body Special finish or material available upon request

INSTALLATION TOOLING UFO Series can be installed with our Hand Tools and Hydro-Pneumatic Tools. For additional tooling information see pages 27 & 28.

Phone: 866-474-3739 I Fax: 716-875-0358 I www.sherex.com I E-mail: info@sherex.com

PNEUMATIC SPIN - SPIN TOOLS

PNEUMATIC SPIN SPIN TOOLS

The 800 Pistol Style Series Designed for installing CAL, CAK, CAH, CAO, CAT, CAW and CPB rivet nut inserts. Features quick change nose piece for head set replacement without tools.

SSG-900 INLINE STYLE SERIES

SSG-800 PISTOL STYLE SERIES

Part Number

Thread Size

Tool RPM

RIGHT ANGLE ATTACHMENT SSG-908

Air Weight Pressure (Dynamic)

Air Inlet

Air Use

Minimum Complete Hex Hose Head Driver Size Assembly

Mandrel

Bearing Set

Anvil

PSI

LBS

NPT

CFM

3000 3000 3000 3000 3000

35-45 70-80 70-90 34-45 34-45

3.0 3.0 3.0 3.0 3.0

1/4" 1/4" 1/4" 1/4" 1/4"

5 5 5 5 5

3/8 3/8 3/8 3/8 3/8

HS-0440 HS-0632 HS-0832 HS-M3 HS-M4

HD-4 HD-6 HD-8 HD-M3 HD-M4

M-0440-150 M-0632-150 M-0832-150 M-M3-30 M-M4-35

BS-4 BS-6 BS-8 BS-M3 BS-M4

A-4 A-6 A-8 A-M3 A-M4

10-24 SSG 802 & 902 10-32 1/4-20 1/4-28 M5 M6

1500 1500 1500 1500 1500 1500

60-80 60-80 70-90 70-90 70-80 70-80

3.0 3.0 3.0 3.0 3.0 3.0

1/4" 1/4" 1/4" 1/4" 1/4" 1/4"

5 5 5 5 5 5

3/8 3/8 3/8 3/8 3/8 3/8

HS-1024 HS-1032 HS-2520 HS-2528 HS-M5 HS-M6

HD-10 HD-10 HD-25 HD-25 HD-M5 HD-M6

M-1024-175 M-1032-175 M-2520-175 M-2528-200 M-M5-40 M-M6-40

BS-10 BS-10 BS-25 BS-25 BS-M5 BS-M6

A-10 A-10 A-25 A-25 A-M5 A-M6

5/16-18 SSG 803 & 903 5/16-24 3/8-16 3/8-24 M8 M10

600 600 600 600 600 600

80-110 80-110 80-110 80-110 80-110 80-110

3.0 3.0 3.0 3.0 3.0 3.0

1/4" 1/4" 1/4" 1/4" 1/4" 1/4"

5 5 5 5 5 5

3/8 3/8 3/8 3/8 3/8 3/8

HS-3118 HS-3124 HS-3716 HS-3724 HS-M8 HS-M10

HD-31 HD-31 HD-37 HD-37 HD-M8 HD-M10

M-3118-175 M-3124-175 M-3716-200 M-3724-200 M-M8-40 M-M10-45

BS-31 BS-31 BS-37 BS-37 BS-M8 BS-M10

A-31 A-31 A-37 A-37 A-M8 A-M10

SSG-804

5/16-18 5/16-24 3/8-16 3/8-24 M8 M10

400 400 400 400 400 400

80-110 80-110 80-110 80-110 80-110 80-110

3.0 3.0 3.0 3.0 3.0 3.0

1/4" 1/4" 1/4" 1/4" 1/4" 1/4"

5 5 5 5 5 5

3/8 3/8 3/8 3/8 3/8 3/8

HS-3118 HS-3124 HS-3716 HS-3724 HS-M8 HS-M10

HD-31 HD-31 HD-37 HD-37 HD-M8 HD-M10

M-3118-175 M-3124-175 M-3716-200 M-3724-200 M-M8-40 M-M10-45

BS-31 BS-31 BS-37 BS-37 BS-M8 BS-M10

A-31 A-31 A-37 A-37 A-M8 A-M10

SSG-808

1/2-13 1/2-20 M12

275 275 275

75-120 75-120 75-120

4.0 4.0 4.0

1/4" 1/4" 1/4"

5 5 5

3/8 3/8 3/8

HS-5013 HS-5020 HS-M12

HD-50 M-5013-250 HD-50 M-5020-225 HD-M12 M-M12-60

BS-50 BS-50 BS-M12

A-50 A-50 A-M12

SSG 801 & 901

4-40 6-32 8-32 M3 M4

*Weight for 800 series only. All spin-spin tools that are less than one half inch capacity can be equipped with a right angle attachment for difficult to access applications. High temperature grease should be used to lubricate the bearing set. Sherex recommends the use of an air regulator, air filter, and lubrication system to reduce the wear of internal components. It is also recommended to lubricate the mandrel to increase performance. Mandrels should be replaced when excessive thread wear occurs with a high quality socket head cap screw. Phone: 866-474-3739 I Fax: 716-875-0358 I www.sherex.com I E-mail: info@sherex.com

HYDROPNEUMATIC SPIN PULL TOOLS

HYDRO-PNEUMATIC SPIN - PULL TOOLS ms 50 MS 50 Thread Size Mandrel Anvil 6-32 MA-364-0632 MA-367-0632 8-32 MA-207-0832 MA-157-0832 10-24 MA-209-1024 MA-159-1032 10-32 MA-162-1032 MA-159-1032 1/4-20 MA-211-2520 MA-161-2520 MS 50 1/4-28 MA-362-2528 MA-161-2520 5/16-18 MA-365-3118 MA-368-3118 5/16-24 MA-366-3124 MA-368-3118 3/8-16 MA-358-3716 MA-357-3716 3/8-24 MA-363-3724 MA-357-3716 M3 MA-203-03MM MA-213-03MM M4 MA-204-04MM MA-214-04MM MS 50 MA-205-05MM MA-215-05MM ThreadM5 Size Mandrel Anvil M6 MA-206-06MM MA-367-0632 MA-216-06MM 6-32 MA-364-0632 M8 MA-208-08MM MA-157-0832 MA-218-08MM 8-32 MA-207-0832 M10 MA-210-10MM MA-159-1032 MA-220-10MM 10-24 MA-209-1024 10-32 MA-162-1032 MA-159-1032 1/4-20 MA-211-2520 MA-161-2520 The MS 50 rivet nut installation tool is design for installing heavy duty rivet nuts from 6-32 to MS100 1/4-28 MA-362-2528 MA-161-2520 3/8-16 (M3-M10). This all-purpose Spin-Pull tool is adjustable to install rivet nuts in materials of Thread Size Mandrel Anvil 5/16-18 MA-365-3118 MA-368-3118 5/16-18 MA-373-3118 MA-369-3118 different thickness, and has a one-touch trigger with auto reverse for easy installation. MS 50 tool 5/16-24 MA-366-3124 MA-368-3118 5/16-24 MA-377-3124 MA-369-3118 3/8-16 comes with one mandrel and anvil. RIV-FLOAT速 can be installedMA-358-3716 with the MS MA-357-3716 50 tool. Contact 3/8-16 MA-374-3716 MA-357-3716 MA-370-3716 速 3/8-24 MA-363-3724 Sherex for RIV-FLOAT mandrel and anvil part numbers. 3/8-24 MA-378-3724 MA-213-03MM MA-370-3716 M3 MA-203-03MM 7/16-14 MA-375-4314 MA-214-04MM MA-371-4314 M4 MA-204-04MM 7/16-20 MA-301-4320 MA-215-05MM MA-371-4314 M5 MA-205-05MM 1/2-13 MA-376-5013 MA-216-06MM MA-372-5013 M6 MA-206-06MM 1/2-20 MA-379-5020 MA-218-08MM MA-372-5013 ms 100 M8 MA-208-08MM M8 MA-308-08MM MA-220-10MM MA-318-08MM M10 MA-210-10MM M10 MA-310-10MM MA-320-10MM M12 MA-312-12MM MA-322-12MM M14 MA-314-14MM MA-324-14MM MS100

MS 100

Thread Size 5/16-18 5/16-24 3/8-16 3/8-24 7/16-14 7/16-20 1/2-13 1/2-20 M8 M10 M12 M14

Mandrel MA-373-3118 MA-377-3124 MA-374-3716 MA-378-3724 MA-375-4314 MA-301-4320 MA-376-5013 MA-379-5020 MA-308-08MM MA-310-10MM MA-312-12MM MA-314-14MM

Anvil MA-369-3118 MA-369-3118 MA-370-3716 MA-370-3716 MA-371-4314 MA-371-4314 MA-372-5013 MA-372-5013 MA-318-08MM MA-320-10MM MA-322-12MM MA-324-14MM

The MS 100 installation tool works exactly like the MS 50, but is designed to install rivet nuts from 5/16-18 to 1/2-20. MS 100 tool comes with one mandrel and anvil. The MS 50 and MS 100 Installation tools should be operated at 80-100 psi. Sherex recommends the use of an air regulator, air filter and lubrication system to reduce the wear of internal components. It is also recommended to lubricate the mandrel to increase performance. Mandrels should be replaced when excessive thread wear occurs.

Phone: 866-474-3739 I Fax: 716-875-0358 I www.sherex.com I E-mail: info@sherex.com

SOCKET HEAD CAP SCREW

NEW NOSE ASSEMBLY All Hydro Pneumatic Installation Tools (MS 50 and MS 100) are now available to come with our new nose piece assembly. This new nose piece utilizes a standard socket head cap screw to replace specially machined mandrels. Cost of 10 Mandrels = New Nose Assembly Piece!!

MS 50S 50S MS MS 50S Socket Head Cap Screw Screw Socket Head Socket Cap Head Cap Screw Thread Size Size Thread 6-32 6-32 8-32 8-32 10-32 10-32 1/4-20 1/4-20 5/16-18 5/16-18 3/8-16 3/8-16 M5 M5 M6 M6 M8 M8 M10 M10

Complete Head HeadComplete Head Complete Mandrel ThreadAssembly Size Mandrel Assembly Assembly SH-50-037-0632 M-632-300 SH-50-037-0632 6-32 SH-50-037-0632 M-632-300 SH-50-037-0832 M-832-300 SH-50-037-0832 8-32 SH-50-037-0832 M-832-300 SH-50-037-1032 M-1032-300 SH-50-037-1032 10-32 SH-50-037-1032 M-1032-300 SH-50-037-2520 SH-50-037-2520 M-2520-300 1/4-20 SH-50-037-2520 M-2520-300 SH-50-037-3118 M-3118-300 5/16-18 SH-50-037-3118 SH-50-037-3118 M-3118-300 SH-50-037-3716 M-3716-300 3/8-16 SH-50-037-3716 SH-50-037-3716 M-3716-300

Anvil Mandrel Anvil

Anvil

MA-367-0632 M-632-300 MA-367-0632 MA-157-0832 M-832-300 MA-157-0832

MA-367-0632

MA-159-1032 M-1032-300 MA-159-1032 MA-161-2520 M-2520-300 MA-161-2520

MA-159-1032

MA-368-3118 M-3118-300 MA-368-3118 MA-357-3716 M-3716-300 MA-357-3716

MA-368-3118

MA-215-05MM M-580-70 MA-215-05MM MA-216-06MM M-610-70 MA-216-06MM

MA-215-05MM

SH-50-037-580 M-580-70 SH-50-037-580 M5 SH-50-037-580 M-580-70 SH-50-037-610 M-610-70 SH-50-037-610 M6 SH-50-037-610 M-610-70 SH-50-037-8125 M-8125-70 SH-50-037-8125 M8 SH-50-037-8125 M-8125-70

MA-218-08MM M-8125-70 MA-218-08MM MA-220-10MM M-1015-70 MA-220-10MM

SH-50-037-1015 M-1015-70 SH-50-037-1015 M10 SH-50-037-1015 M-1015-70

MA-157-0832 MA-161-2520 MA-357-3716 MA-216-06MM MA-218-08MM MA-220-10MM

MS 100S 100S MS 100S MS Socket Head Cap Screw Screw Socket Head Socket Cap Head Cap Screw Thread Size Size Thread 5/16-18 5/16-18 3/8-16 3/8-16 1/2-13 1/2-13 M8 M8 M10 M10 M12 M12

Complete Head HeadComplete Head Complete Mandrel ThreadAssembly Size Mandrel Assembly Assembly

Anvil Mandrel Anvil

SH-50-038-3118 SH-50-038-3118 M-3118-400 5/16-18 SH-50-038-3118 M-3118-400 SH-50-038-3716 M-3716-400 3/8-16 SH-50-038-3716 SH-50-038-3716 M-3716-400 SH-50-038-5013 M-5013-400 1/2-13 SH-50-038-5013 SH-50-038-5013 M-5013-400 SH-50-038-8125 M-8125-100 M8 SH-50-038-8125 SH-50-038-8125 M-8125-100 SH-50-038-1015 M-1015-100 M10 SH-50-038-1015 SH-50-038-1015 M-1015-100 SH-50-038-12175 M-12175-100 M12 SH-50-038-12175 SH-50-038-12175 M-12175-100

MA-369-3118 M-3118-400 MA-369-3118 MA-370-3716 M-3716-400 MA-370-3716

Anvil MA-369-3118 MA-370-3716

MA-372-5013 M-5013-400 MA-372-5013 MA-318-08MM M-8125-100 MA-318-08MM

MA-318-08MM

MA-320-10MM M-1015-100 MA-320-10MM MA-322-12MM M-12175-100 MA-322-12MM

MA-322-12MM

MA-372-5013 MA-320-10MM

Item Number Number DescriptionDescription Item Item Number Description 1 Mandrel 1 1 Mandrel Mandrel 2 Drive Adaptor 2 2 Drive Adaptor Drive Adaptor Drive Adaptor (2) Adaptor (2) Drive Adaptor Drive (2) 33 3 Adaptor Cup 4 4 4 Adaptor CupAdaptor Cup Jam Nut Nut 55 5 Jam Jam Nut 6 Nose Piece 6 6 Nose Piece Nose Piece Anvil Anvil Anvil 77 7

Phone: 866-474-3739 I Fax: 716-875-0358 I www.sherex.com I E-mail: info@sherex.com

VALIDATION CAPABILITY VALIDATION CAPABILITY

This case study is provided to highlight Sherex design support capabilities. Contact Sherex to review your application. case study

A Tier One automotive manufacturer needed to attach a composite (SMC) covered magnesium roof panel reinforced with aluminum roof bows to an aluminum bracket necessary to attach the roof assembly to the vehicle. The roof assembly weighed approximately 35 kg and the material was 4mm thick at its fastening point. The manufacturer conducted FEA simulations on the joint, and concluded the fastening points would be subjected to approximately 260 kgF of dynamic loading in service. Based on this, the OEM determined they would use a P.C. 8.8 hex washer head bolt with a dog point to mate with the Sherex recommended CAL2-610-6.6W rivet nuts. A validation testing program incorporating the principles of Six Sigma (DFSS) was conducted on the actual assembly to assure the hardware selected would meet the necessary performance requirements with appropriate safety factors. Pull Out - Pull Out testing of the M6 rivet nut installed in the application yielded an average 1563 kgF with an upper specification limit (+3 Sigma) of 1603 kgF and a lower specification limit (-3 Sigma) equal to 1501 kgF. This provides a comfortable safety factor for any in-service dynamic loading the fastening points may see not detected during the FEA simulation. Torque Out – The rivet nut was required to meet Class 8 performance characteristics after installation. All Sherex rivet nuts are manufactured to meet a minimum of Class 8 thread strength requirements. Spin Out – The bolts were to be assembled to 8.0 Nm of torque using a DC driver and a “Torque” drive strategy (as opposed to Torque – Angle or Torque – Yield). This drive strategy generally has a torque delivery accuracy of +/- 10%. To account for this variation as well as additional variables introduced in a production environment, a 10.0 Nm minimum performance requirement was established. Sherex developed a testing program to analyze how different upset forces and distances would affect spin out. Testing concluded that the optimal upset force was 7.5 kN, as it produced the highest average spin-out of 11.6 Nm with minimal performance variation. Corrosion Resistance – The application would be assembled and disassembled regularly and would be exposed to moisture along with cleaning chemicals quite frequently. Corrosion of the nut could cause binding of the bolt during service which could result in damage to the rivet nut upon bolt removal. If this occurred, the repair procedure would be time consuming and costly. Additionally, corrosion from the joint could cause staining on the Class A roof surface which would require an expensive service procedure. Stainless Steel was cost prohibitive for the application. Sherex introduced its CR Series Zinc-Nickel finish as an alternative to stainless steel rivet nuts. CR Series plated rivet nuts were installed in the application and the entire assembly was subjected to salt spray testing to ensure no galvanic corrosion would occur. The application surpassed 1400 hours with no red rust when tested per ASTM B-117 neutral salt spray test procedure. Given it’s impressive performance, the CR Series plating is currently the only approved plating for application. Tooling – Given the critical nature of the application, Sherex recommended and the customer implemented the Sherex process monitoring installation tooling which measures the installation force and upset distance of the rivet nut installation. The system generates an installation curve graphically representing the installation process. A tolerance window is established based on the validation testing performed and if the installation curve falls outside of the tolerance window the system notifies the operator and shuts down the cell to ensure a zero defect production environment.

*Test Data can vary greatly due to application. Sherex recommends you contact us to get testing data for your specific application.

Phone: 866-474-3739 I Fax: 716-875-0358 I www.sherex.com I E-mail: info@sherex.com

TESTING METHODS TESTING METHODS

pull out

Definition: • Pull Out occurs when threads are pulled from the rivet nut (ultimate thread strength) or base material is distorted and the entire rivet nut pulls through the base material. Causes: • Hole size is too large. • Forces applied to the joint are higher than anticipated.

spin out

Definition: • Spin Out is the amount of torque required to make a rivet nut spin in the hole it was installed in. Causes: • Bolt cross threads into the rivet nut causing it to spin. • Excessive corrosion causes bolt to bind in the nut. • Using a screw with mechanical locking feature that has higher prevailing torque than the spin out of the rivet nut. torque out

Definition: • Torque force required to strip threads out of the rivet nut. • This method of testing sandwiches the head of the rivet nut between the non-rotational mating part and parent or base panel. • Spin Out is not a factor because tightening the bolt on the non-rotating part holds the rivet nut in place and prevents it from spinning. Causes: • Assembly torque is too high causing thread failure. • Improper grade of fastener used. *Torque can be affected by various factors such as coefficient of friction of the finish, prevailing torque, washers, etc… Sherex recommends you test your application. suggested assembly torque

Definition: • Recommended torque for assembling a rivet nut joint with class 8.8 hardware. Contact Sherex should you require Grade 8, Class 10 or higher joint strength.

SUGGESTED ASSEMBLY TORQUE

THREAD SIZE

INCH LBS. -Nm PLATED SCREW GRADE 5 CLASS 8.8

# 6-32 UNC # 8-32 UNC # 10-24 UNC # 10-32 UNF 1/4-20 UNC 1/4-28 UNF 5/16-18 UNC 5/16-24 UNC 3/18-16 UNC 3/8-24 UNF M4x0.7 ISO M5x0.8 ISO M6x1.0 ISO M8x1.25 ISO M10x1.5 ISO M12x1.75 ISO

12 22 32 36 75 75 156 156 276 276 2.5 5.0 8.6 21.0 42.0 72.0

TEST DATA IS FOR REFERENCE ONLY. SHEREX RECOMMENDS TESTING YOUR APPLICATION FOR AN EXACT FIGURE.

Phone: 866-474-3739 I Fax: 716-875-0358 I www.sherex.com I E-mail: info@sherex.com

SHEREX PRODUCT SHOWCASE PRODUCT SHOWCASE

M6 stud was developed for an attachment point to a truck frame. Design incorporated wedgehead feature for increased spin out resistance and the MAThread速 screw design for reduced cross thread risk during assembly. Application incorporated Sherex Process Monitoring Tooling to ensure each part was properly installed.

Was developed to attach a molded plastic cover to a base unit. If the rivet nut has an outside thread to accept a nut, the plastic cover could be altered and the external thread of the rivet nut could be used for the attachment point.

Designed with an extra large head to act like a spacer.

Designed for especially thick blind applications in composite materials.

Sherex developed this part to add increased spin out resistance in soft materials. Special knurl design provides increased engagement with the base material. Small flange provided near flush installation.

Special small grip part designed for materials thinner than .030 inches.

* MAThread速 is a registered trademark of MAThread Inc.

Phone: 866-474-3739 I Fax: 716-875-0358 I www.sherex.com I E-mail: info@sherex.com

SHEREX PRODUCT SHOWCASE PRODUCT SHOWCASE

Sherex developed a high strength rivet nut that is compatible with class 10.9 bolts. This design incorporates a full hex body for increased spin out resistance. It also ensures the bolt is the failure mode, which is a best practice when working with structural applications.

Special head and wedge design to meet spin-out requirements in an application.

Sherex shouldered rivet nut was developed for attachments in plastics. The shoulder design provides a positive metal to metal installation redirecting the load of the joint through the rivet nut shoulder. This minimizes the plastic from creeping during assembly and maintains joint clamp load.

M6 prebulbed slotted body design incorporated under head wedges to increase the spin out resistance in soft plastic.

5/16-18 prebulbed slotted body style with a trimmed head. This head feature allowed installation in the field by the consumer or assembler when used with a special low cost installation tool. Feature also allows head to sit flush within a slot to prevent spin out.

Closed end design with o-ring and o-ring recess under head provides the ultimate sealing solution for attachment points in applications with chemicals and other fluids that breakdown other sealing compounds.

Phone: 866-474-3739 I Fax: 716-875-0358 I www.sherex.com I E-mail: info@sherex.com

ENGINEERING GUIDE ENGINEERING GUIDE

design support capabilities

• Sherex USA combines design & engineering support - Ensures the end user is using the correct fastener for the application • Sherex USA utilizes Solidworks 3D modeling - Simulates specialty rivet nut designs - The Finite Element Analysis portion of the software allows us to create simulations of the application to ensure it will meet the load requirements of the application.

sherex production

• Sherex Production Capabilities - Multi-station progressive forming machines for deep extrusions • Production methods used: - Machining - Tapping - Drilling - Additional supporting equipment

sherex quality

• Statistical Process Control (SPC) - Used in the manufacturing process - Critical for use in Level 3, Rev 4 PPAP • Sherex quality labs - Use the latest in testing equipment to ensure our products meet stringent quality requirements. • Computerized tensile machine • Standard measuring equipment • Salt spray booth • Gauging equipment • Torque machine • Advanced optical sorting equipment is available for automotive and critical parts

Phone: 866-474-3739 I Fax: 716-875-0358 I www.sherex.com I E-mail: info@sherex.com

1/64 .0180 78

.0156 .457

,396 47

.0160

.406

.0180

.457

.0200

,508

.0210

,533

.0200

,508

.0210

,533

.0225

,572

.0240

.0250Size

(Dec.) ,635

(mm)

.026080

.0135 ,660

,343

77 76 75

72 79

3/3250 48

.0160 ,742

,660

.406

.031069

.0180

.457

.031275 68

,792 .0210 .0310 ,533

,787

.032074

.330 72 67

66 .035071

1/32 73

.0225 ,813

.0312

.0240

,838

,660 ,711

.0292

,742

.036065

.0280

64 .037068

.0360 ,787 ,940 .0310

,914 34

1/32 63

.0380

.0312 .0370 ,792

,940 33

62 .039066

.0350 ,914

,965

.0320

.0380

,991 .330

61 .040065

,965 32

,838

.0390 .0350 1,016 ,889

64 60

,889 35

,813

.0370

,940

58 61

.0380 1,067

,965

1,041

.0420 ,991 .0390

1,067

.0400 .0430 1,016

1,092

1,181

.042062

.0430

.046559

1,041

.0410

1,092

60 57

No. of Gauge 10 11 12 13 14 15 16 17 18 19 20

1110 12

0.101

110.0907

0.072

2,946 2,705

8,611

47/64

.7344

.3480 5,410 8.839

49/64 3/8

.7656 .3750 19,446 9,525

9,093

25/32

.3770.7812

9,576 19,842

9,129W

51/64 .3860.7969

20,241 9,804

0.0641

.1130

32 .1094 .1200

.1160 2,779 3,048

.1100 31

2,794 .1200

.1250 .1110

3,175

1/8

.1360

3,454

.1960

2,946.2010

4 5,105 .2130

13/64 3,048.2031

7/32 .2040 .2055 2

.1405 .1250

3,569 3,175

7/32

A .2188

9/6330

.1285 .1406

3,264 3,571

.2210 15/64

.1440 .1405

9/63

.1406 .1470 26

3,569 .1440

.1405

9/63 .1360 27

.1406 3,454

3,658

3,571 3,734

.1470

.1440

.1495 25

3,658

3,861 3,797 .1520

3,797

3,569

3,571.2280

3,658.2340

3,734 C

5,410 1

3/8 .2280

.3750 5,791 9,525

.2340

5,791

.2340 5,558 5,613 .2344

15/64 5,791

.2380

5,944 .3770

W 5,954 .3860

6,045 .3970

5,944 B

X .2380

.2500 6,248 1/4

6,350 7/16 27/64 .4219 6,350 10,716 .2500

.2460

.1520 .1495 24 .1520

.1540 23

3,861

1/4

.2500

7/16

.4375

.1540

.1562 5/32 .1562

3,912

3,967 .1562 3,967

3,912 E

6,350

.2500

F 3,967.2570

6,350

.2570 F 6,528

29/64

.4531

Steel

&(U.S. S) 0.1345 Std.) (U.S. Std.)

0.0897 0.0598

21 22

9,921

11,509

Steel

0.0285 Gauge (B &0.0329 S) (B & S) Gauge

.4062.8906 10,317 22,621

.4040 22,22510,262 .8750

57/64 13/32

.4062

10,317

29/32 .4130.9062

59/64

23,017 10,490 .4130 10,490 15

.9219

23,416

.4375.9531 11,113 61/64 24,20911,113 7/16 .4375 31/32

.9688

24,608

63/64

.9844

25,004

11,908 15/32 .4688 1.46881.000 25,40011,908 Steel Steel (U.S. Std.) (U.S. Std.)

0.0897

0.0418 0.0359

0.0113

260.0100 27 28 29 30

Y 7/8

0.0269

250.0126

10,084

0.0209 0.0226

23,829 10,262

.3970

230.0179 240.0142

10,084 21,433

26 27

55/64 .4040.8594

0.0159

23 24 25 26 27 28 29 30

0.0269

0.0179

0.0201 0.0164 0.0149 0.0179

0.0226 0.0201 0.0179

0.0135 0.0159

0.0159 0.0120 0.0142 0.0126 0.0113 0.0100

0.0142 0.0126 0.0113 0.0100

0.0239 0.0209 0.0179 0.0164 0.0149 0.0135 0.0120

0.0269 0.0239 0.0209 0.0179 0.0164 0.0149 0.0135 0.0120

0.0359

Phone: 866-474-3739 I Fax: 716-875-0358 I www.sherex.com I E-mail: info@sherex.com

.4531 .4531 11,50911,509 63 6,35029/64 29/64

6,528 15/32 .2570 15/32 .4688 6,528 11,908

Aluminum

0.0226

.3970.8438 27/32

0.1046

0.0359

0.0418 0.0320

.8281 .3906 21,034 9,921

.3906

0.0299 0.0299

0.0478

53/64 25/64

0.0253 0.0253 0.0239

0.0478

0.0538

.3860 20,638 9,804 .8125

0.0403

0.0359 0.0598

6,350 .2500

11,113

Aluminum No. of (B & S) No. of Aluminum (U.S. Std.) 0.0253

9,576

W 13/16

220.0201

0.0673 0.0418

10,317

.3770

0.0538

0.0538 0.0747

10,262Z

6,147

0.0329 0.0329

0.1196

0.072

No. of Gauge

18,654

U .3680 19,050 9,347 3/4 .3750.7500 9,525

0.0299 0.0285 0.0285

0.0907 0.1196 0.0897 0.0673

.2500 E

S.3580.6875 .34809,093 11/16 17,463

0.1345

0.1046

1/4 D 3,861 .2460

D 6,147

11/32 .3480 .34388.839 8,733

0.1196 0.1010.1345 0.1046

6,248 6,24827/64 27/64 .4219 .4219 10,71610,716 61 .2460 Z .4130 10,490 15/16 .9375 23,813

Steel

13/32

10,084 6,045

.4062

D 3,797.2420

6,147 .2420

3,912 .1540

9,804 Y

.4040

.1495 3,734

9,576 X

5,944

.2344 .3906 5,954 25/64 9,921

.1470

25/64

0.0453

0.0320

.3680 5,613 9,347

13/32

0.0598

200.0359

.2210 U

6,045

0.0508

0.0403

23/64 .3594 5,613

5,558

5,954 .2420

0.0453

5,558 .3580

.2380

.2188

.2344

0.0673

0.0320

S .2130

0.0359

0.0508

.3390

15/64

0.0403 0.0571 0.0478

.2090 .3438 5,309 11/32 8,733 5,410 3/8

.2280

28 1/8

19 20

2 5,309

3,454.2130

1815

0.0571

5,220 .2210

4 3,264 .2090

8.839 25 5,220 23/64 .3594 9,129 9,093 51 Q .3320 8,433 23/32 .7188 18,258 .2055 23/64 5,309 5,220 U .3680 .35949,347 9,129 13

.2188

7/32

8,026

.2031 P 5,182 .3230 5,159 8,204 T

5,182

3,175

0.0747

0.0453

5,159 3

5,105

21/64 8,334 .2040 .3281 5,182

.2090 5,055

.1990

0.0641

.2055

2,870 4

3,048 .1360

2,870 3,264

.2010 5,159

13/64 .2040 4,851 4,978

.1285 2,946

.1200 29

2,819

.1250

30 .1160

0.0571 0.0508

2,642

6 11 2,794 .1910

7 .2031

15,479

33 .1160 .1065

2,870

.104

0.0641 0.0808 0.0747

0.072

.6094

.1130

2,779 13/64

7,938

.3390.6250 47 .33208,611 15,875 8,433

Q 5/8

.7031 .3580 17,859

1513 16

39/64

45/64 T

1412

0.0808

4,915 6

5/325/32 1,702

0.0808

5,055

.1960 .2969 4,978 19/64 7,541

19/32 15,083 .3320.5938 21/64 .32818,433 8,334 23

10 2,819 .1935

0.101 (B

7,493

2,578 .1110

.1130 .1285

23 1,613

7,366Q

4,915

.3230 .31608,204 8,026 11 .5625 14,288 37/64 14,684 8,204 45 P.3281.5781 .32308,334 O 9/16

.1100 2,819 2,527

24 1,588

.2950

.31258,026 7,938

.5469

.1015 34

.1094 2,794

13 2,705 .1850 7

.2900

13,891

5/16

35 .1110 .0995

25 1,511

0.0907

.1990

9 4,623

13,492

35/64

26 1,397

4,978 .1935

17/32 .3160.5312

1/8 34

4,915 21/64 9/32 .2812 4,851 7,142 .1910

4,496 .1960 4,572

7,036

.1935 4,394 11 10

.1800

6,909O

4,763

17,066

No. of Aluminum SteelStd.) (B & Aluminum S) (U.S. Gauge Gauge 10 (B & S)

2,578

.2770

.6719

Aluminum

No. of

.1770 9

.2720

43/64

2,383 .1065 2,779

4,851 4,801 P .1890 K .2810 7,137

.3160

1,588 .0595 .0625 1,511 1,702 .0670 1,702 .0670

14 2,642 .1820

.1910

12 4,366

10 17 2,527 .1730

2,705

4,801 .1875

7,938

.3020 13,096 7,671

.0625 53 1/16 .067051 51

3/16

.3125.5156

33/64 N

7,541

4,801

.059553

4,305

5/16

6,756 4,700

12,304 7,671

.2969 12,700 .5000

.1890

1,321

1,613

4,216 .1890

.1695

H .1850

31/64 .3020.4844

19/64 1/2

1,191

1,613 .0635

.1660

2,489.1719 11/64

4,763 .2660

4,089 13

2,43812

.1015

.104 2,375

.0938 36 .1094

6,630N

2,489

.0520

.0635

.1065 37 .0935

2,261

.1875

.2610 4,700

7,493

.0980

.0469 1,397

2,578 2,083 .0995

2,527

3/16

20 2,383 .1610

.1820 .2656 4,623 17/64 6,746

.2950

7/64 .1100

.063552

.0995 40 38

.05503/64 54

.0960

1,994

14 4,039

(mm) 7,541

16,667

1,588

1,984 2,489

3,988 .1850

Size .2969(Dec.)

.6562

1,321

.0625

.0781 .0980 41

2,438

.1570 13

21 2,375 .1590

(mm) 19/64

7,493

Inch .2900 Metric 7,366

21/32

.0465 .0520 1,181

1/16

1,930 .0938

Size4,623 (Dec.)

.2950

Drill L

41/64 16,271 8,611 R.3438.6406 .33908,733

.0960 .0760

.0935 1,854

(mm) .1820

7,142

7,366

.3125

.052056

1,511

1,778 2,383

(Dec.) 14

2,261

.2812

.2900

N 5,105 .3020 5,055 7,671 .1990 11/32

.0595 1,397 .0550

.0700 .0938

Size

4,572

Metric 16

9/32

5/16

4,572

.1800

Drill2,184 Inch

4,763

1,191

.1800

4,496

7,137

4,700 8 .2010

.0469 1,092 .0430 .0550

.0890

(mm) 2,375

.1770

7,142

.2810

.1875

1,067

1,321

.2812

3/16

1,041

3/64 57

6,909

2,438

.0420 1,191

.2720

.0960

1,181 .0410

.0465

Metric 4,496

.0890

.046958

Drill .1770 Inch

2,261

2,184 2,642

1,016

.041063

Metric .0860

.0860 .104

,991 7/64

.0360 .0400 ,914

Inch 44

.1015 .0820 39

,838 7/643/32

.0260 .330 ,889

4,394

44 42

9/32

.1730

36 ,813

4,394

.0980 2,057

.0320 ,635 .0250

.1730

2,083

2,184

.0810

.0820

.0785

37 ,792

,609

H.2770 .26607,036 6,756 I

3/32

38 ,787

,572

2,083

42 .0730

5/64

39 ,742

.0292 ,508 .0200

4,216

4,366

(Dec.) .0935

40 ,711

.1660

.1719

42Size

,609

.0156 .0260 ,396

.0280

4,089

11/64

.0890

.029278 70

1,984

.1610 4,305

2,057

.0781

20 .1695

.0810

.0860

,572 Drill

,711

1,93018

,635

.02801/64

.0820

.0250 ,368 .0145

.0240

.0760 1,994

.0810 2,057 11/64 .1719 4,366 K .2810 7,137 SHEREX DECIMAL EQUIVALENTS &4,305 DRILL SIZE CHART 47 .0785 1,994 18 .1695 J .2770 7,036

Inch .0225 Metric

5/64

,609

Drill 74

48 .0785

ADDITIONAL SHEREX SERVICES ADDITIONAL SHEREX SERVICES sherex website

• Complete product catalog. • Download the catalog, drawings, installation methods and installation videos. • Links to the 3D models. • Spanish translations available.

installed 3d model download

• Choose your: style of interest, type of material, material thickness, open or closed end, and thread size. • Creates an installed 3D model of the fastener for placement into your modeling system. • The model is available in 21 different file formats. • Models are available for the Imperial/Inch body style rivet nuts, RIV-FLOAT® and Brass Inserts.

marketing tools

Rivet Nut Plate

• Features installed samples of: CAL, CAK, CAH, CA, CAO, CFT, Locsert®, Seal 2, Dejond Aluminum, Dejond Stainless Steel, and RIV-FLOAT®.

Sherex Sample Cases

• Contains various samples of rivet nuts and brass inserts. Ideal for countertop displays.

Sherex Binder

• Filled with useful information, such as: training presentation, specialty rivet nut sell sheets, competitive cross reference guide, and much more.

Phone: 866-474-3739 I Fax: 716-875-0358 I www.sherex.com I E-mail: info@sherex.com

NOTES NOTES

Phone: 866-474-3739 I Fax: 716-875-0358 I www.sherex.com I E-mail:info@sherex.com

SHEREX FASTENING SOLUTIONS 400 Riverwalk Pkwy, Suite 600 Tonawanda, NY 14150 Phone: 866-474-3739 Fax: 716-875-0358 www.sherex.com E-mail: info@sherex.com

SHEREX TAIWAN

No. 201, Sandong Road Chungli City Tao-Yuan Hsien, Taiwan R.O.C. E-mail: sales@sherex.com.tw

SHEREX MÉXICO S de RL de CV

Av. Constituyentes 47, Desp. 104, Col. El Pocito, Corregidora, Querétaro, C.P. 76910, México Telephone: +52 (442) 196 8075 E-mail: ventasmexico@sherex.com www.sherex.com.mx

ALL INFORMATION IN THIS CATALOG IS SUBJECT TO CHANGE WITHOUT NOTICE - VERSION 3.10