HOW TO You’ll install the reed block between the reed valve assembly and the carburetor, with it oriented properly.
STEP
14
Add the reed valves manifold block and then fasten the complete carburetor assembly to the engine. Apply blue Loctite® sparingly to a few threads on the bolts. Then tighten the hex head bolts to secure the carburetor assembly to the engine, but don't over tighten them. You want secure but not crushing the manifold.
Here you see the hole in the gasket and the reed block. They must be installed properly so the carburetor can pump fuel.
106
RC FLYER NEWS • Sept/Oct 2018
twitter.com/rcflyernews
