RELATIONSHIPS AND HOPE FUEL THE NEW YEAR

by Jesse Dvorachek

s I sit in my office amid piles of work I need to catch up on from the long, extended manure hauling season, I have flashbacks to the “exciting” fall we all had . . . broken safeties on rippers, more blown hoses than a guy would care to remember, and tying chains and straps together to get equipment pulled out of muddy fields. Those were just some of our issues, but I know our challenges were no different than most applicators in the Midwest.

I then had a warm, positive feeling come over me as I thought of all the phone calls I shared with other professional nutrient applicators. For a while in October and November, we were sharing our daily miseries, and the big question was, “How are we going to get this all done?”

For the most part, we are going to get it all done. We are going to get our customers through and have our best year yet in the worst conditions Mother Nature has ever thrown at us!

I talked with many applicators, most of whom I am lucky to call friends, on the daily struggles they were going through. I would try to help and leave them with a positive note and the hope that the rest of the day, week, and season were going to be better. It had to get better. We, as a custom applicator group, are extremely resilient.

As the season progressed, I found we were talking more and more about how we could assist one another by helping each other’s customers and sharing equipment and resources as much as possible. I am very proud to be in an industry where when things get tough, we can band together and share ideas, equipment, and time before deer hunting or Thanksgiving. But this year was anything but normal. Getting to a place of understanding — and the hope that better weather was coming — was the only thing we had on our side, and hope was a big part of it. any other resources we have available to help each other get the job done.

In a year when farmers were already struggling to get crops off, customer relations were also a sensitive aspect of the business. They needed to help us manage how we were going to get manure out of storage and do it as best we could with the conditions we were handed.

We pump about 250 million gallons a year, running two transfer crews and one directing crew. Our company was moving anywhere there was ground that was even marginally ready to go. And that often brought up tough conversations when a customer was expecting you to be there until the pit was empty, and instead saw their applicator leaving them with a half-full pit in mid-November.

Normally, that is the time of year we are returning to empty them out one last

As the calendar flipped to 2020, I got a text from a customer who wanted to get a little more out of their manure storage. So, we went into the new year with a super early start and more of the same conditions. But, a new year means a new start.

As I leave you with this first column, I’d like to share a saying my lender sent me that I reflect upon often: “On particularly rough days when I’m sure I can’t endure, I like to remind myself that my track record for getting through the bad days so far is 100% . . . and that’s pretty good.”

Author unknown

The new Kuhn Knight HP 160 hydraulic push box spreader features the proven ProPush design in a higher capacity, commercial duty package. The HP 160 with VertiSpread vertical beaters is designed to haul and spread solid materials from dairies and feedlots, including gutter manure, yard scrapings, bedding pack, and feedlot manure. The hydraulic push-type design means no apron chains, fewer moving parts, and dependable service life.

The HP 160 joins the 2044 and 2054 ProPush hydraulic push box spreader family, but features new upgrades and a greater heaped capacity of 600 cubic feet. The all-steel welded frame on the HP 160 provides a solid foundation for the spreader’s sides and floor. The solid weld-in tongue is cross-braced for strength and rigidity, while the updated pusher design has increased the clearance between the tractor and implement for greater maneuverability.

VertiSpread vertical beaters equipped on the Kuhn Knight HP 160 provide customers with a uniform 25- to 30-foot spread pattern with excellent material breakup. Polylaminate floor and sides minimize friction and deliver exceptional machine clean out. For precise monitoring and application tracking, an optional scale system is available. For more information, visit www.KuhnNorthAmerica.com.

Oxbo International introduced the latest members of their nutrient management system, the 4103 and 5105 LNMS spreaders. The three-wheeled 4103 offers a 4,200-gallon tank, and the five-wheeled 5105 has a 6,600-gallon capacity. Both feature 6-inch connections with quick couplers and 10-inch galvanized pipework to maximize their capabilities. The premium Vogelsang Rotacut cutter offers 2,600 gallons per minute capacity and is mounted on the side with a large door for easier clean out.

The spreaders are equipped with CAT IV three-point hitches to connect to a wide variety of injectors and are capable of being used in drag hose operations. Both chassis have powered front wheels for optimal agility and traction, and the 5105 has steerable rear axles. The spreaders are powered by fuel-efficient Scania Tier 4F engines. For more information, visit www.oxbocorp.com.