Dultmeier Sales | 2020 Liquid Handling Equipment & Supplies Catalog A by Dultmeier Sales

Polypropylene Ball Valves Ball Valves

Special Pattern & "Stubby"Poly Ball Valves

Polypropylene • Viton® Seals • 100% Teflon Seats • Stainless Steel Bolts

V150 Full Flow V200 Std. Flow V204FP Full Flow

• 1/2” - 2”: 150 PSI, 4”: 75 PSI-, 3”: 100 PSI. • Precision molded in polypropylene reinforced with fiberglass for additional strength.

• Ball is diamond turned, after molding, to make it spherically perfect, which provides precise contact between ball and seats. • Viton® “O” ring stem seal. S.S. Bolts. • Teflon® self-lubricating stem bushings and

6-Bolt Valves

V200FP Full Flow V300 Std. Flow V300FP Full flow V400 Std. Flow

DESCRIPTION

Lightweight hose end valve for convenient transfer of liquids into drums, tanks, etc. Angled end flange with 8" long polypropylene fill spout. Straight Mtg. Bracket V25270 fits V150 & V200 V10270 Fits V100FP & V125

TK V07200 TK V10200 TK V20200 TK V25200 TK V30200 TK V35200 TK V25271 TK V25270 TK V10271 TK V10270 TK V20166 TK V25165

VSMT200 & VSMT204FP

90° Mtg. Bracket V25271 fits V150, V200 V10271 fits V100FP & V125

RETAIL $ 30.15 30.15 30.15 33.23 33.23 42.88 42.88 42.88 57.35 60.30 96.48 144.39 313.56 51.19 51.19 77.72

2" MPT x 2" FPT

VSFMT Adapter x MPT 2” & 2” FP - 3” & 3”FP

VSFHB200 D

Part No. Part No. Part No. Part No. Part No. Part No.

BANJO VALVE REPAIR KITS RETAIL

For: V075...................................... $ 20.10 For: V100FP & V125..................... 24.12 For: V150, V200, VA150 & VA200. 36.45 For: V200FP & VA200FP.............. 47.57 For: V300...................................... 66.73 For: V300 FP................................. 122.61 * 90° Mounting Bracket................. 17.42 * Straight Mounting Bracket.......... 16.08 ** 90° Mounting Bracket................ 8.91 ** Straight Mounting Bracket......... 31.22 1-1/2” Nozzle Pipe........................ 6.32 2” Nozzle Pipe............................... 7.57

(800) 228-9666

2" Adapter x 2" Hose Barb

5% Discount on Standard Pkgs.

DULTMEIER SALES • OMAHA, NE

VFMT204FP 2" Adapter x 2" MPT

VS204FP 2" FPT x 2" FPT

Part No. Description Flow RETAIL TK VSF200 2" Adapter x 2" FPT................ 1-1/2" $ 46.90 TK VSF204FP 2" Adapter x 2" FPT Full Port. 1-1/2" 56.68 TK VSF300 3" Adapter x 3" FPT................ 2-1/2" 115.91 TK VSMT200 2" FPT x 2" MPT..................... 1-1/2" 46.90 TK VSMT204FP 2" FPT x 2" MPT Full Port...... 2" 56.68 TK VS204FP 2" FPT x 2" FPT Full Port....... 2" 56.68 TK VSMT300 3" FPT x 3" MPT..................... 2-1/2" 145.73 TK VSFMT200 2" Adapter x 2" MPT................ 1-1/2" 49.85 TK VSFMT204FP 2" Adapter x 2" MPT Full Port 2" 56.68 TK VSFMT300 3” Adapter x 3” MPT................ 2-1/2” 115.91 TK VSFMT300FP 3” Adapter x 3” MPT Full Port. 3” 147.07 TK VFMT200FP 2" Adapter x 2" MPT Full Port 2" 70.35 TK VSFHB200 2" Adapter x 2" Hose Barb...... 1-1/2" 57.35

“ECONOMY”

Single Union Poly Ball Valves • Glass-Filled Polypropylene • 100 PSI W.P.

• EPDM “O”-Rings • Full Port

SUV Style - Can Turn Handle Both Ways

Flow Std. Part No. Ports Dia. Pkg. RETAIL TK UV050FP 1/2" 1/2" 24 $ 15.54 TK UV075FP 3/4" 3/4" 24 15.54 TK UV100FP 1" 1" 24 19.43 TK MSUV100FP * 1” 1” 24 19.43 TK UV125FP 1-1/4" 1-1/4" 24 39.80 TK UV150FP 1-1/2" 1-1/2" 24 39.40 TK UV200FP 2" 2" 18 41.81 * Male x Male 1” Flanged. 5% Discount on Standard Pkg.

Valve Repair Kits Include: 1-Ball, 2-Ball Seats, 1-Upper Stem Bushing & 1-Viton® “O”-Ring. * Fits 1-1/2" - 3" FP Valves. ** Fits 1” & 1-1/4” Valves.

IND

VSMT300 3" MPT x 3" FPT

1 Stem V07151 V10151 V20151 V25151 V15151 V25151 2 Handle Straight N/A V10153 V20153 V25153 V25153 V25153 2 Handle Angle V20152 V25152 3 Valve Body V07254 V10254 V20254 V25254 V30254 V35254 4 Valve Ball V07155 V10155 V20255 V25255 V30255 V35255 5 1/2" End Plate V05256 5 3/4" End Plate V07257 5 1" End Plate V07256 V10257 5 1-1/4" End Plate V10256 V20267 5 1-1/2" End Plate V20257 5 2" End Plate V20256 V25256 5 3" End Plate V30264 V35264 5 2" Angle End Flange V20261 V25261 5 1-1/2" Angle End Flange V20262 6 Teflon Seats V07258 V10258 V20258 V25258 V30258 V35258 7 Upper Stem Bushing V07159 V10159 V20159 V25160 V25160 V25160 8 Lower Stem Bushing V07159 V10159 V20160 V25160 V25160 V25160 9 Viton® O-Ring Stem V07163 V10163 V20163 V25163 V25163 V25163 10 Valve Body O-Ring V07264 V10264 V20264 V25264 V30265 V35265 1-1/2" Nozzle Pipe V20166 2" Nozzle Pipe V25165 V25165

Part No.

3" Adapter x 3" FPT

2" Adapter x 2" FPT

VA150 Nozzle - 1-1/2" VA200 Nozzle - 2" VA200FP Nozzle - 2" Full Flow

V125FP V150 Banjo Valves Parts V050 VA150 current style valves with V075 V100FP V200 V200FP V300 V300FP white polypropylene ball V100 V125 VA200 VA200FP V300 V300FP ITEM

VSF300

VSF200 & VSF204FP

Port Opening Standard Part No. Valves Size Thru Ball Package TK V050 Full Flow 1/2" 3/4" 24 TK V075 Full Flow 3/4" 3/4" 24 TK V100 Std. Flow 1" 3/4" 24 TK V100FP Full Flow 1" 1" 24 TK V125 Std. Flow 1-1/4" 1" 24 TK V125FP Full Flow 1-1/4" 1-1/2" 24 TK V150 Full Flow 1-1/2" 1-1/2" 24 TK V200 Std. Flow 2" 1-1/2" 24 TK V204FP * Full Flow 2" 2-1/16" 8 TK V200FP Full Flow 2" 2-1/16" 8 TK V300 Std. Flow 3" 2-1/2" 8 TK V300FP Full Flow 3" 3" 6 TK V400 Std. Flow 4" 3-1/2" 4 TK VA150 Full Flow 1-1/2" 1-1/2" 12 TK VA200 Std. Flow 2" 1-1/2" 12 TK VA200FP Full Flow 2" 2" 6 * 4-Bolt Design

Available for those hard-to-fit applications. Eliminates extra fittings. 1-1/2" and 2" flow as indicated. Features: Glass-filled Polypropylene • Teflon Seals • Stainless Steel Bolts • Compact Design • Lightweight • Various Styles • 100 PSI W.P. @ 70° F.

V075 Full Flow V100FP Fulll Flow V125FP Full Flow

• Self-aligning ball moves freely against the Teflon® seals for smooth operation. The valve opens and closes with very little pressure on the handle.

seats cannot stick or bind.

•

www.dultmeier.com

• DAVENPORT, IA

(800) 553-6975

E0325

Polypropylene Ball & Nozzle Valves

1" Chemical Nozzle Valves UVA100 Hose end Nozzle Valve for use with ag chemicals and many other chemicals. Incorporates the “Single Union Poly Ball Valve”. Polypropylene material is resistant to most chemicals and fertilizers. 45 degree spout assembly will fit & stay put in any tank opening. Has Full Flow Ball with 1" FPT Inlet.

UVA100

Bottom & Side Load 3-Way POLYPROPYLENE Ball Valves • Precision molded in polypropylene. Reinforced with fiberglass. • Self-aligning ball & Teflon® seats. Valve opens & closes with very little pressure on handle.

F0236 Anti-Drip Nozzle Spout for Banjo™ Nozzles

VN100

Capacity to 40 GPM - 75 PSI Maximum Pressure

• 100 PSI rating. BOTTOM LOAD: Directional flow, right or left. Valve can be turned off to stop flow.

SIDE LOAD: Directional flow, right or left. Valve cannot be turned off.

VL20153L fits V125FP, V150, & V200. VL25153 fits V200FP, V204FP, V300, V300FP, V400, VFMT200FP & VFMT200FPSH.Polypropylene with Stainless Steel Hardware Note: 500KA-201 Master Padlock is not included.

VL25153

Part No.

RETAIL

TK VL20153L $ 17.42 TK VL25153 28.01 MR 500KA-201 8.38

VL20153L

3-Way Valve Handle Pipe Part No. Description Type Size TK V075BL 3/4" Bottom Load T 3/4" TK V100BL 1" Bottom Load T 1" TK V125BL 1-1/4" Bottom Load T 1-1/4" TK V150BL 1-1/2" Bottom Load T 1-1/2" TK V200BL 2" Bottom Load 9” Straight 2" TK V075SL 3/4" Side Load 3” Straight 3/4" TK V100SL 1" Side Load 3” Straight 1" TK V125SL 1-1/4" Side Load T 1-1/4" TK V150SL 1-1/2" Side Load T 1-1/2" TK V200SL 2" Side Load 5” Straight 2" TK VT200SL 2” Side Load T 2” Valves with straight handles available.

Flow Size RETAIL 1" $ 43.55 1" 43.55 1-1/2" 67.67 1-1/2" 67.67 2" 86.43 1" 43.55 1" 43.55 1-1/2" 67.67 1-1/2" 67.67 2" 86.43 2” 85.09

Intermediate Bulk Container POLYPROPYLENE Ball Valves

Ball Valve Handles

FEATURES: • All Teflon Seals.

Designed to hold ball valves steady and secure. Allows for positioning of hose with less effort. Fits 4 or 6 bolt ball valves in 2” or 3” sizes. Handle is 1” diameter x 5-1/2” long. Welded steel construction. TT BVH24 TT BVH24FP TT BVH26 TT BVH36

• Stainless Steel Bolts.

RETAIL 1" Poly Ball Valve Nozzle $ 31.09 1" Poly Nozzle Valve....... 54.54 Anti-Drip Nozzle Spout... 24.12 Repair Kit for VN100....... 21.17

Locking Handles for Banjo Valves

Part No.

• Teflon® self-lubricating stem bushings and seats cannot stick or bind.

• Glass filled Polypropylene resists corrosion. • Stainless handle, spring and pin • Teflon® pin bushing • Viton® rubber parts • Padlock capability • 1" FPT Inlet

Part No. TK UVA100 TK VN100 FR F0236 TK VN10200

VN100

• Viton® “O” ring stem seal.

Valve Size

2”, 4-Bolt 2”, 4-Bolt Full Port 2”, 6-Bolt 3”, 6-Bolt

• Glass Filled Polypropylene.

• Maximum Operating Pressure 100 PSI @ 70° F. - 75 PSI @ 150° F.

• Stainless Steel Bolts.

• Zinc Alloy Collar with Viton® Gasket.

• Lightweight.

Wt.

RETAIL

1 lbs. 1 lbs. 1 lbs. 1.2 lbs.

$ 37.12 37.12 37.12 38.46

344M - Manually Operated 3-Way POLYPROPYLENE Ball Valves

VSMT202MRA 2" Male NPT x V20283 Metal Collar

• 3-way design diverts flow to either outlet; no shut off. • Wetted parts: glass-reinforced polypropylene, Teflon and Viton®.

VSF202MRA 2" Male QDC x V20283 Metal Collar

• 5 PSI pressure loss at 24 GPM flow.

• 125 PSI operating pressure. D

Part No. Ports SS 344M3-3/4PP 3/4" SS 344M3-1PP 1" SS 346M3-1-1/4PP 1-1/4" SS 346M3-1-1/2PP 1-1/2"

IND

Part No. Description Flow RETAIL TK VSF202MRA † 2" Male QDC x V20283 Metal Collar 1-1/2" $ 75.71 TK VSMT202MRA † 2" Male NPT x V20283 Metal Collar 1-1/2" 67.00 TK WFC230254 One Way Valve for Mauser/Mamor Tanks.......... 48.91 TK WSFBC210 One Way Valve for Schutz Tanks....................... 47.17 † For Grief & Sonoco Tanks.

Valve Outlet Style Ports RETAIL 3-Way Two $ 41.81 3-Way Two 41.81 3-Way Two 67.00 3-Way Two 67.00

DULTMEIER SALES • OMAHA, NE

(800) 228-9666

Viton® is a registered trademark of DuPont Performance Elastomers

•

www.dultmeier.com

• DAVENPORT, IA

(800) 553-6975

E0326

Polypropylene Flanged Manifold Valves & Fittings Features: Positive Seals • Quick & Easy Assembly • Easy On/Off Hose Connections • 360˚ Orientation • No Threads, No Sealant, No Pipe Tape • Heavy Duty Glass Filled Polypropylene Sizes: 1" (Full Port) • 2" Std. Port (1-1/2" I.D.) • 2" Full Port (2" I.D.) • 3" Std. Port & Full Port (2-1/2" Port) • 1” - 2”: 150 PSI W.P.; 3”: 100 PSI @ 70° F. Note: 2" Full Port valves & fittings can only be used with other 2" Full Port Fittings. Clamps and gaskets must be ordered separately.

Flange x MPT Ball Valves “Stubby” Part No. TK VSMT200CF TK MVSMT300

Part No. TK MVS220FP

Part No. TK VSF200CF TK MVSF220FP TK MVSF300 TK MVSF300FP

“Stubby”

Flange x FPT Ball Valve “Stubby” Size 2" FP Flange x 2" FPT Valve

Flange x Male Adapter Valves “Stubby”

Clamp

Fitting

Directional Flow, Right or Left • 100 PSI • Valve Can Be Turned Off to Stop Flow • All Flanged Ports

Thru Handle Part No. Description Ball Type RETAIL TK MV100BL 1" Flanges ................. 1" T $ 52.26 TK MV200BL 2" Std. Port Flanges ... 1-1/2" T 56.01 TK MV220BL 2" Full Port Flanges .. 2" Straight 89.11 TK MV300BL 3” Full Port Flanges... 3” Straight 238.52

3-Way Side Load Manifold Poly Valves

RETAIL $ 68.34

Directional Flow, Right or Left • 100 PSI • All Flanged Ports Valve Cannot Be Turned Off to Stop Flow

Thru Handle Part No. Description Ball Type RETAIL TK MV100SL 1" Flanges ................. 1" T $ 52.26 TK MV200SL 2" Std. Port Flanges ... 1-1/2" Straight 67.67 TK MV220SL 2" Full Port Flanges .. 2" Straight 89.11

Description RETAIL 2" Flange x 2" Male Adapter.......... $ 46.90 2" FP Flange x 2" Male Adapter.... 56.68 3" Flange x 3" Male Adapter.......... 115.91 Banjo Valves Parts 3” FP Flange x 3” Male Adapter..... 145.73 MV100CF MV300 MV200CF MV300FP MV220CF

for Flanged Valves

ITEM

Flange x Flange Ball Valves Part No. Size RETAIL TK MV100CF 1" Full Port........... $ 33.23 TK MV200CF 2" Std. Port............ 46.90 TK MV220CF 2" Full Port........... 62.71 TK MV300FP 3" Full Port........... 149.75 TK MV300 3" Std. Port............ 102.51 TK MVS220CF 2” Full Port “Stubby” 56.68 TK MVS300CF 3” Std. Port “Stubby” 115.91 TK MVS300CFFP 3” Full Port “Stubby” 143.05

Boom Pipe Adapters Boom Pipe Adapters are designed to quickly and easily connect to standard 1” S.S., PVC or polypropylene pipe. The opposite end is a 1” Banjo flanged adapter. No threading or welding required, just insert the 1” pipe into the stainless steel sleeve and screw it down tight. 360° Orientation. Will not work on tubing. M100PA

Gasket Valve

3-Way Bottom Load Manifold Poly Valves

Description RETAIL 2" Flange x 2" MPT Male Thread Std. Ball Valve................. $ 54.54 3" Flange x 3" MPT Male Thread Std. Ball Valve................. 145.73

M100PAT

DESCRIPTION

Part No. Part No. Part No. Part No.

Part No.

1 1" Manifold End Plate V10278 1 2" FPManifold End Plate MV30264 V25378 1 2" Manifold End Plate V20294 1 3" FPManifold End Plate V35278 2 Handle V10153A V25153 V20153 V25153 V25153 3 Valve Body V10254 V30254 V20254 V35254 V25254 4 S.S. Handle Washer V07021A V25121 V20021 V25121 V25121 5 #10 x 3/4" S.S. Handle Bolt V10021A 5 1/4" x 1/2" S.S. Handle Bolt V20020 5 3/8" x 1/2" S.S. Handle Bolt V25020 V25020 25020 6 5/16" S.S. Lock Washer V10118 6 3/8" S.S. Lock Washer V20018 V20018 V20018 V20018 7 5/16" S.S. Nut V10119 7 3/8" S.S. Nut V20019 V20019 V20019 V20019 8 5/16" x 3-1/2" S.S. Body Bolt V10117 8 3/8" x 4" S.S. Body Bolt V20017 8 3/8" x 4-1/2" S.S. Body Bolt V25017 8 3/8" x 5" S.S. Body Bolt V30017 8 3/8" x 6" S.S. Body Bolt V35017 9 Upper Stem Bushing V10159 V25160 V20159 V25160 V25160 10 Stem O-Ring FKM (Viton®) V10163 V25163 V20163 V25163 V25163 11 Thrust Washer V10060 V25060 V20060 V25060 V25060 12 Stem V10151A V25151B V20151M V25151B V25151B 13 Ball Seat V10258A V30258A V20258A V35258A V25258A 14 Valve Ball V10155 V30255 V20255A V35255A V25255 15 Valve Body O-Ring FKM (Viton®) V10264 V30265 V20264 V35265 V25264 N/S Valve Repair Kit V10200 V30200 V20200 V35200 V25200

Constructed of glass-reinforced polypropylene with stainless steel hardware and double EPDM o-ring seal (Viton® available). D

Part No. Description RETAIL TK M100PA 1” Flanged Pipe Adapter........ $ 44.22 TK M100PAT 1” Flanged Pipe Adapter Tee.. 49.18 Viton® is a registered trademark of DuPont Performance Elastomers

IND

DULTMEIER SALES • OMAHA, NE

(800) 228-9666

•

www.dultmeier.com

• DAVENPORT, IA

(800) 553-6975

E0628

Tank Valves & Fittings

Manifold Single Union Valve Flange X Flange

Heavy Duty Tank Valves • Four Variations of 3” Heavy Duty Polypropylene Tank Valves with Stainless Ball Stem, Handle & Bolts.

• Precision molded in polypropylene. Reinforced with fiberglass.

• Locking Handle with MPT, Part A Adapter or Flange Connections.

• PTFE Seats for Smooth Operation & Proper Sealing.

• 100 PSI Teflon Seals. • Viton® Body Seals.

• EPDM O-Rings. V700/V800 MPT x Adapter

• Use with Heavy Duty Bolted Flange Clamps (shown on adjacent pages)

• Interlocking Body & End Plate.

• Double O-Rings in Stem Area. • 100 PSI rating. Max. Pipe Opening Part No. PSI SIze Thru Ball RETAIL TK MSUV100FP 1” Manifold FP Union Valve 100 1" 1” $ 19.43

V701/V801 Flange x Adapter

2” Full Port ANSI Flange Bolted Poly Ball Valves

V803 Flange x Flange

• 100% PTFE Seats. • FKM (Viton®) Seals.

V702/V802 MPT x Flange

• Glass-Filled Polypropylene. • Unique Compact Design. • Lightweight.

• Maximum Operating Pressure is 150 PSI @ 70° F.

Part No. TK V700 TK V800 TK V701 TK V801 TK V702 TK V802 TK V703 TK V803

BANJO Valve RETAIL 2” MPT x 2” A Adapter............... $ 145.73 3” MPT x 3” A Adapter............... 280.06 2” Flange x A Adapter................ 149.75 3” Flange x A Adapter................ 280.06 2” MPT x 2” Flange.................... 149.75 3” MPT x 3” Flange.................... 280.06 2” Flange x Flange..................... 149.75 3” Flange x Flange..................... 280.06

Part No. TK VSF200FPAF 2” FP Valve Male Adapter x 2” ANSI Flange TK VSMT200FPAF 2” FP Valve Male NPT x 2” ANSI Flange

150

2”

$ 133.33

150

2”

160.47

Flanged Bolted 5-Way Ball Valve • FKM (Viton®) Seals.

Polypropylene Swivels • Teflon Thrust Bearing

Max. Pipe Opening PSI SIze Thru Ball RETAIL

• PTFE Self-Lubricating Stem Bushings • Fiberglass-Filled Polypropylene.

• Hex Flats

• Self-Aligning Ball Valves for Smooth Operation.

• S.S. Drive Stud • Heavy Duty Reinforced • 75 PSI Polypropylene • Viton® O-rings

• Ball is Diamond Turned D

SW Style

• Maximum Operating Pressure is 150 PSI @ 70° F. Part No. TK MV225CF 2” FP Flange 5 Way Valve

MSW220

Part No.

Description

TK SW100 TK SW150 TK SW200 TK MSW220

1" Female x 1" Male Poly Swivel........... $ 12.40 1-1/2" Female x 1-1/2" Male Poly Swivel 15.14 2" Female x 2" Male Poly Swivel........... 17.02 2” FP Flanged Poly Swivel.................... 31.36

Max. Pipe Opening PSI SIze Thru Ball RETAIL 150 2" 2” $ 297.48

RETAIL

2” Full Port Stainless Steel Ball Valves

SHIPPING

MVSF220SS

“BestWay” shipping may not be the quickest option, but it will help to lower your freight bill. If you select this method of shipping, Dultmeier will calculate the cheapest way to ship your package(s) at the time of shipment.

• Unique Compact Design. • 100% PTFE Ball Seats. • All TFE Seals. No Elastomers.

Find Us on Facebook and Twitter

Max. Pipe Opening Part No. PSI SIze Thru Ball RETAIL TK MVSF220SS S.S. Valve, 2” FP Flange x 2” Male Adapter 200 2” 2” $ 226.46 TK VSFMT220SS S.S. Valve, 2” MPT x 2” Male Adapter 150 2” 2” 266.66

Viton® is a registered trademark of DuPont Performance Elastomers

IND

DULTMEIER SALES • OMAHA, NE

(800) 228-9666

•

www.dultmeier.com

• DAVENPORT, IA

(800) 553-6975

E0929

Polypropylene Flanged Manifold Fittings

Gasket Valve

Clamp

Fitting

Features: Positive Seals • Quick & Easy Assembly • Easy On/Off Hose Connections • 360˚ Orientation • No Threads, No Sealant, No Pipe Tape • Heavy Duty Glass Filled Polypropylene Sizes: 1" (Full Flow) • 2" Std. Port (1-1/2" I.D.) • 2" Full Port (2" I.D.) • 3" (2-1/2" Flow) • 1” - 2”: 150 PSI W.P.; 3”: 100 PSI W.P. @ 70° F. Note: 2" Full Port valves & fittings can only be used with other 2" Full Port Fittings. Clamps and gaskets must be ordered separately.

Flange x Flange Couplings

Flanged Crosses Part No. Size RETAIL TK M100CR 1" $ 18.89 TK M200CR 2" 30.82 TK M220CR 2" Full Port 33.77 TK M300CR 3" Full Port 68.34

Reducer Couplings Flange x Flange

Part No. Description RETAIL TK M700H 1" Flange x 3/4" MPT................ $ 2.29 TK M700A 1" Flange x 1" MPT................... 2.29 TK M700G 1" Flange x 1-1/4" MPT............. 2.29 TK M700B 2" Flange x 1-1/4" MPT............. 4.31 TK M700C 2" Flange x 1-1/2" MPT............. 4.31 TK M700D 2" Flange x 2" MPT................... 4.31 TK M700E 2" Full Port Flange x 2" MPT... 4.31 TK M700F 3" Flange x 3" MPT................... 12.40

316 Stainless Flange x MPT Socket Weld Fittings

Part No. TK M200100CPG TK M220100CPG TK M220200CPG TK M300200CPG TK M300220CPG

Part No. Size TK M100CPG90 1" x 1" TK M200CPG90SH 2" x 2" Short TK M200CPG90 2" x 2" TK M220CPG90 2" x 2" Full Port TK M300CPG90 3" x 3"

Part No. Size RETAIL TK M100TEE 1" $ 6.46 TK M100TEEC1 1” with 1/4” Gauge Port 10.12 TK M200100TEE 2" x 2" x 1" 12.93 TK M220100TEE 2" FP x 2" FP x 1" 13.74 TK M220200TEE 2” FP x 2” FP x 2” 21.17 TK M220100TEE 2” FP x 2” FP x 1” 13.74 TK M200TEE 2" 12.40 TK M220TEE 2" Full Port 12.40 TK M300TEE 3" 57.62

Part No. Description RETAIL TK M100050FPT 1" Flange x 1/2" FPT.... $ 2.29 TK M100075FPT 1" Flange x 3/4" FPT.... 2.29 TK M100FPT 1" Flange x 1" FPT....... 4.45 TK M200FPT 2" Flange x 2" FPT....... 10.79 TK M220FPT 2" FP Flange x 2" FPT. 20.64 TK M300FPT 3" Flange x 3" FPT....... 33.37

Flange X Hose Barb

Flange x Male Adapters (CAM)

IND

Part No. Size RETAIL TK M701A 1" x 3/4" HB $ 2.16 TK M701B 1" x 1" HB 2.16 TK M701C 1" x 1-1/4" HB 2.16 TK M701D 2" x 1" HB 4.98 TK M701E 2" x 1-1/4" HB 5.25 TK M701F 2" x 1-1/2" HB 4.72 TK M701G 2" x 2" HB 4.98 TK M701H 2" Full Port x 1-1/2" HB 4.98 TK M701I 2" Full Port x 2" HB 4.72 TK M701J 3" x 3" HB 13.87 TK M701K 3" x 2" HB 15.41

Bottom Drain Flanged Tank Fittings D

EPDM Gaskets • Designed to Provide Total Tank Cleanout

Description RETAIL 1" x 1" Flange 45°................... $ 10.52 2" x 2" Std. Port Flange 45°..... 12.26 2" x 2" Full Port Flange 45°.... 14.67 3" x 3" Flange 45°................... 60.03

DULTMEIER SALES • OMAHA, NE

Bolted Manifold

45° Flanged Manifold Fittings Part No. TK M100CPG45 TK M200CPG45 TK M220CPG45 TK M300CPG45

RETAIL $ 7.04 11.73 11.73 10.79 50.52

Flange Tees

Flange x Female Fittings (FPT)

Description RETAIL 2" Std Port x 1" Reducer Flange................... $ 13.60 2" Full Port Flange x 1" Reducer Flange....... 15.01 2" Full Port x 2" Std. Port Reducer Flange. . 15.01 3" x 2" Std Port Reducer Flange................... 35.11 3" x 2" Full Port Reducer Flange.................. 31.62

Part No. Description RETAIL TK M100A 1" Male Adapter x 1" Flange................. $ 5.92 TK M200A 2" Male Adapter x 2" Std. Port Flange.. 8.11 TK M220A 2" Male Adapter x 2" Full Port Flange. 8.91 TK M300A 3" Male Adapter x 3" Flange................. 17.29

90° Elbow x Flange

Part No. Description RETAIL TK M100MPTSS 1" Flange x 1" MPT.................................. $ 21.98 TK M200125MPTSS 2" Std. Flange x 1-1/4" MPT.................... 37.12 TK M200150MPTSS 2" Std. Flange x 1-1/2" MPT.................... 34.44 TK M200MPTSS 2" Std. Flange x 2" MPT........................... 47.57 TK M220150MPTSS 2" Full Port Flange x 1-1/2" MPT............ 49.58 TK M220MPTSS 2" Full Port Flange x 2" MPT.................. 49.58 TK M300220MPTSS 3” Full Flange x 2” FP MPT...................... 140.37 TK M300MPTSS 3" Full Flange x 3" MPT........................... 83.08 TK M100SWFSS 1” Flange x Socket Weld Fitting............... 21.98 TK M200SWFSS 2” Flange x Socket Weld Fitting............... 62.71 TK M220SWFSS 2” Full Port Flange x Socket Weld Fitting 58.29 TK M300SWFSS 3” Flange x Socket Weld Fitting............... 99.16

Part No. Size RETAIL TK M100CPG 1" $ 4.98 TK M200CPG 2" 11.86 TK M220CPG 2" Full Port 13.47 TK M220CPG3G 2” Full Port 1/2” Gauge Port 34.71 TK M220CPG6 6” Long, 2” Full Port 18.89 TK M300CPG 3", 4” Long 15.81 TK M300CPG7 3”, 7” Long 18.76 TK M300CPG12 3”, 12” Long 97.15 TK MSW220 2” FP Flanged Swivel 31.36

Flange x Male Thread Adapters (MPT) D

(800) 228-9666

•

Part No. TK MBF100BD TK MBF150200BD TK MBF200BD TK MBF220BD TK MBF300BD

www.dultmeier.com

Description RETAIL 1" Flange x 1" Female Thread................................... $ 55.61 2" Standard Port Flange x 1-1/2" Female Thread..... 39.13 2" Standard Port Flange x 2" Female Thread............ 55.34 2" Full Port Flange x 2" Female Thread.................... 63.65 3" Flange x 3" Female Thread................................... 87.77 Viton® Gaskets also available.

• DAVENPORT, IA

(800) 553-6975

E0338

Polypropylene Flanged Manifold Fittings & Clamps

Flange x Hose Barb 90˚ Elbows

45°

Flange Clamps & Gaskets

90°

Part No. Size RETAIL TK M702A 1" Flange x 3/4" HB............................ $ 2.43 TK M702B 1" Flange x 1" HB............................... 2.43 TK M702C 1" Flange x 1-1/4" HB......................... 2.43 TK M702D 2" Flange x 1" HB............................... 9.31 TK M702E 2" Flange x 1-1/4" HB......................... 9.31 TK M702F 2" Flange x 1-1/2" HB......................... 8.51 TK M702G 2" Flange x 2" HB............................... 9.31 TK M702H 2" Full Port Flange x 1-1/2" HB............... 9.31 TK M702I 2" Full Port Flange x 2" HB................ 9.31 TK M702J 3" Flange x 2" HB .............................. 15.28 TK M702K 3" Flange x 3" HB............................... 37.12 TK M602E 2” Std. Port Flange x 1-1/2” HB 45°........ 16.48 TK M602G 2” Std. Port Flange x 2” HB 45°........... 19.43 TK M602I 2” Full Port Flange x 2” HB 45°.......... 18.63 TK M602K 3” Flange x 3” HB 45° Elbow............... 64.99

EPDM Gaskets are ribbed to keep in place during assembly

Flange Clamps

Part No. Description RETAIL TK FC100 1" Flange Clamp.......................... $ 5.29 TK FC200 2" Flange Clamp.......................... 6.23 TK FC220 2" Flange Clamp, Full Port.......... 6.50 TK FC300 3” Flange Clamp.......................... 8.84 TK M100G 1” EPDM Gasket *........................ 1.62 TK M100GV 1” Viton® Gasket.......................... 5.79 TK M201G 2” EPDM Standard Port Gasket * 1.89 TK 150GV 2” Viton® Standard Port Gasket. 4.65 TK M221G 2” Full Port EPDM Gasket *....... 2.02 TK 200GV 2” Full Port Viton® Gasket......... 5.92 Flange Clamp TK M301G 3” EPDM Gasket *....................... 2.16 Part No. Size RETAIL TK 300GV 3” Viton® Gasket......................... 9.72 TK M220D 2” FP Flange x 2” Female Coupler.... $ 20.50 * Ribbed. TK M303D 3” Flange x 3” Female Coupler.......... 39.40

Flange x Female QDC

T-Bolt Flange Clamps

Polypropylene

Bolted Manifold Tank Flanges EPDM Gaskets

T Bolt Part No. Outlet x Inlet RETAIL TK MBF100 1" Flange x 1" Female Thread................. $ 55.61 TK MBF200 2" Std. Port Flange x 2" Female Thread.. 55.61 TK MBF220 2" Full Port Flange x 2" Female Thread. 64.32 TK MBF300 3" Flange x 3" Female Thread................. 86.43 Note: Viton® Gaskets also available.

Flange Plugs Part No. Size RETAIL TK M100PLG 1" $ 2.29 TK M200PLG 2" 4.31 TK M220PLG 2" Full Port 5.65 TK M300PLG 3" 15.01

Bolted Flange Clamps

Bolted

— HEAVY DUTY —

Part No. Description RETAIL TK FC220B 2” Bolted Flange Clamp, Full Port .... $ 38.46 TK FC300B 3” Bolted Flange Clamp, ................... 42.88 D TK M221G 2" Full Port EPDM Gasket................ 2.02 TK 200GV 2" Full Port Viton® Gasket................ 5.92 TK M301G 3" EPDM Gasket................................ 2.16 Bolted TK 300GV 3" Viton® Gasket................................ 9.72

Flange Plugs with Gauge Port

"U" Bolts

200 Series • Stainless Steel

Gauge Port Part No. Description FPT RETAIL TK M100PLG025 1" Flange Plug 1/4" $ 10.25 TK M200PLG025 2" Std. Port Plug 1/4" 13.47 TK M200PLG050 2" Std. Port Plug 1/2" 13.47 TK M200PLG075 2" Std. Port Plug 3/4" 13.47 TK M220PLG075 2” Full Port Plug 3/4” 20.37 TK M200PLG100 2" Std. Port Plug 1" 13.47 TK M300PLG100 3” Std. Port Plug 1” 24.92 TK M300PLG075 3” Flange Plug 3/4” 24.12

To be used with Banjo flanged fittings. Note: This is Not a Standard U-Bolt. Part No. RETAIL TK UB100 1" U-Bolt $ 21.17 TK UB200 2" U-Bolt 21.04 TK UB220 2" FP U-Bolt 22.24 TK UB300 3” U-Bolt 44.49

SERVICE & REPAIRS

Flange x Hose Barb Tees Part No. TK M100100HBT TK M100125HBT TK M220200HBT TK M300300HBT

Part No. Description RETAIL TK FC220TB 2” T Bolt Flange Clamp, Full Port... $ 27.20 TK FC300TB 3” T Bolt Flange Clamp,.................. 28.54 TK M221G 2” Full Port EPDM Gasket.............. 2.02 TK 200GV 2” Full Port Viton® Gasket............. 5.92 TK M301G 3” EPDM Gasket............................. 2.16 TK 300GV 3” Viton® Gasket............................. 9.72

Did you know? We can service almost every brand of pump we sell in our catalog.

Size RETAIL 1" Flange x 1” Hose Barb Tee........... $ 7.97 1" Flange x 1-1/4" Hose Barb Tee.... 9.85 2" FP Flange x 2” Hose Barb Tee..... 14.87 3" Flange x 3" Hose Barb Tee........... 32.29

Call us at 1-800-228-9666 (Omaha, NE) for a quote! Viton® is a registered trademark of DuPont Performance Elastomers

IND

DULTMEIER SALES • OMAHA, NE

(800) 228-9666

•

www.dultmeier.com

• DAVENPORT, IA

(800) 553-6975

E0337

Flange Clamps & Gaskets • Tank Fittings Universal Flange Clamps Hypro Flange Clamps for manifold systems. GXT Polymer with UFG EPDM flange gaskets. Compatible with Banjo flange connections. 1” to 2” rated to 150 PSI and 3” rated to 125 PSI.

Part No. Description

HY C100 HY C150 HY C200 HY C300

Tank Fittings with Manifold Connections • Glass Reinforced Polypropylene. • Flanged Connections.

• EPDM or Viton® Gaskets. • Gaskets & Clamps Sold Separately.

RETAIL

1” Flange Clamp & Gasket..................................... 1-1/2” & 2” Flange Clamp & Gasket....................... 2” Full Port Flange Clamp & Gasket,...................... 3” Clamp Flange Clamp & Gasket..........................

$ 8.11 8.91 9.85 13.33

D D

Flange Gaskets MTF220BD MTF300BD

For Use on BANJO or Other Manifold Flange Connections Part No.

Description

HY UFG0100E HY UFG0150E HY UFG0200E HY UFG0300E HY UFG0100V HY UFG0150V HY UFG0200V HY UFG0300V

EPDM Flange Gasket, 1”............................... EPDM Flange Gasket, 2” Std. Port............... EPDM Flange Gasket, 2” Full Port................ EPDM Flange Gasket, 3”............................... Viton® Flange Gasket, 1”............................... Viton® Flange Gasket, 2” Std. Port............... Viton® Flange Gasket, 2” Full Port............... Viton® Flange Gasket, 3”...............................

New Universal Flange Clamps

Part No. TK MTF220 TK MTF300 TK MTF220BD TK MTF300BD TK FC220 TK FC300 TK M221G TK 200GV TK M301G TK 300GV

RETAIL

$ 1.07 1.21 1.21 1.62 6.59 9.31 11.32 16.48

Old Worm Gear Clamps

MTF220 MTF300

Description RETAIL 2” Full Port Bulkhead Tank Fitting, 3.25” Hole............... $ 26.93 3” Bulkhead Tank Fitting, 4.25” Hole.............................. 46.23 2” x 2” Full Port Bottom Drain Tank Fitting, 3.25” Hole.. 27.20 3” x 3” Bottom Drain Tank Fitting, 4.25” Hole................ 46.23 Heavy Duty Flange Clamp............................................... 6.50 Heavy Duty Flange Clamp............................................... 8.84 2” Full Port EPDM Gasket............................................... 2.02 2” Full Port Viton® Gasket............................................. 5.92 3” EPDM Gasket............................................................. 2.16 3” Viton® Gasket........................................................... 9.72

Long Radius Sweep Elbows These 90° Elbows provide improved flow for maximum GPM. They can be direct replacement for standard 90° flanged fittings.

Clamshell design holds fittings in place before tightening the bolt for easy assembly. The worm gear clamps need to be engaged before being capable of holding fittings in alignment.

914 Series Flange x Adapter

916 Series Flange x MPT

915 Series Flange x Flange

918 Series Flange x Hose Barb

Part No. Description RETAIL TK 914-2 2” Full Port Flange x Male Adapter................................ $ 13.47 TK 914-3 3” Full Port Flange x Male Adapter................................ 68.34 TK 914G-3 * 3” Same as above with 1/4” Gauge Port.................... 60.70 TK 915-1 1” Flange x Flange....................................................... 12.93 TK 915G-1 Same As Above with a 1/4” Gauge Port........................ 15.95 TK 915-2A 2” Standard Port x 2” Full Port, Flange x Flange........... 15.95 TK 915-2SP 2” Standard Port Flange, Flange x Flange...................... 14.54 TK 915-2SS 2” Full Port Flange x Flange, Stainless.......................... 105.86 TK 915-2 2” Full Port Flange x Flange.......................................... 13.47 TK 915-3X2 3” Full Port Flange x 2” Full Port Flange....................... 60.97 TK 915-3 3” Full Port Flange x Flange.......................................... 62.04 TK 915G-3 * 3” Same as above with 1/4” Gauge Port.................... 68.34 TK 916-2 2” Full Port Flange x MPT............................................. 14.87 TK 916-3 3” Full Port Flange x MPT............................................. 68.34 TK 916G-3 * 3” Same as above with 1/4” Gauge Port.................... 60.70 TK 918-1 1” Full Port Flange x 1” Hose Barb................................ 14.00 TK 918-1A 1” Full Port Flange x 1-1/4” Hose Barb......................... 15.81 TK 918-2X1-1/2 2” Full Port Flange x 1-1/2” Hose Barb......................... 26.60 TK 918-2 2” Full Port Flange x 2” Hose Barb................................ 31.89 TK 918-3 3” Full Port Flange x 3” Hose Barb................................ 62.04 * 1/2” Gauge Port Available.

Captured nut and bolt design reduces assembly and maintenance time by eliminating the need to feed a track through the worm gear.

Improving safety through elimination of sharp edges that can harm operators.

Viton® is a registered trademark of DuPont Performance Elastomers

IND

DULTMEIER SALES • OMAHA, NE

(800) 228-9666

•

www.dultmeier.com

• DAVENPORT, IA

(800) 553-6975

E1070

Ball Valves & Micro Valves

Polypropylene Micro Valves

Steel Plated Ball Valves High Pressure • 5000 - 7250 PSI D

High Pressure, Steel Plated Ball Valves. Rated to 7250 PSI operating pressure. Standard features include chrome-plated ball and Teflon seats. Rated to 200° F. Part No. TW 9501 TW 9502 TW 9503 TW 9504 TW 9505

Ports Max. PSI 1/4” FPT 7250 3/8” FPT 7250 1/2” FPT 7250 3/4” FPT 7250 1” FPT 5000

• Precision Molded Polypropylene Reinforced with Fiberglass

Max. GPM RETAIL 1.8 $ 18.09 5.0 18.09 8.0 19.30 20 32.03 31 42.55

LV025MTV

Carbon Steel Ball Valves are available in two different brands:

Part No. TK LV025V TK LV038V TK LV050V TK LV025MTV TK LV038MTV TK LV050MTV TK LVHB025V TK LVHB038V TK LVHB050V TK LVHB075V TK LVHB075MTV

Generic Import Valves are rated to 2000 PSI and 390° F. Part No. Size Max. PSI Brand

GN 100951 1/4” GN 100952 3/8” GN 100953 1/2” GN 100954 3/4” GN 100955 1” GN 100956 1-1/4” GN 100957 1-1/2” GN 100978 2” GN 1A127 1/4" GN 1A128 3/8" GN 1A129 1/2" GN 1A130 3/4" GN 1A131 1" GN 1A132 1-1/4” GN 1A133 1-1/2” GN 1A134 2”

Male Thread x Hose Barb

2000 Import $ 18.22 2000 Import 16.88 2000 Import 16.88 2000 Import 28.68 2000 Import 39.40 2000 Import 62.04 2000 Import 74.37 2000 Import 106.53 2000 Parker 27.20 2000 Parker 27.20 2000 Parker 28.68 2000 Parker 41.41 2000 Parker 56.95 1500 Parker 99.16 1500 Parker 148.41 1500 Parker 168.51

Part No. TK LVHB385MTV TK LVHB751MTV

With 1” Flanged Connection Part No. TK MLV100V

Part No. FPT Type Max. PSI Max. Temp. TW 2032 3/8" Plated Brass 5000 176° F. TW 2033 1/2" Plated Brass 3000 176° F. TW 2038 1/4" 304SS 6000 300° F. TW 2039 3/8" 304SS 6000 300° F. TW 2040 1/2" 304SS 6000 300° F.

• 90° Rotating Handle, 150 PSI W.P. • Precision Molded Polypropylene Reinforced with Fiberglass • Standard Viton® Seats & O-Rings • Maximum Operating Pressure is 150 PSI

Polypropylene Micro Valves With Locking Handle

Micro Valves

• Polypropylene • Viton® • 150 PSI

IND

Part No. TK LV100 TK LV101 TK LV102 TK LV103

Micro Ball Valves RETAIL 3/8” FM x 1/2” M Drain Plug Outlet. $ 15.14 3/8” HB x 1/2” M Drain Plug Outlet. 15.14 1/2” FM x 1” M Drain Plug Outlet.... 13.33 3/4” HB x 1” M Drain Plug Outlet.... 13.33

DULTMEIER SALES • OMAHA, NE

Unique locking handle requires user to pull up first, then turn open or close. Great for applications where a handle could be bumped accidentally.

Part No. TK M75-LOCK TK M75100-LOCK TK M3850-LOCK Viton® is a registered trademark of DuPont Performance Elastomers

(800) 228-9666

Part No. Description RETAIL TK LVPL025V 1/4” Micro Push Lock Valve.................... $ 20.10 TK LVPL038V 3/8” Micro Push Lock Valve.................... 20.10 TK LVPL050V 1/2” Micro Push Lock Valve.................... 26.00

RETAIL $ 40.74 63.38 64.99 110.55 115.91

for Line Strainer Cleanout

Description RETAIL Micro Valve with 1” Flanged (Manifold) Ends............ $ 12.93

Push Lock Micro Valves

3000 - 6000 PSI

2032

Description RETAIL 3/8” Hose Barb X 1/2” MPT Micro Valve............. $ 13.47 3/4” Hose Barb X 1” MPT Micro Valve................ 13.47

Polypropylene Micro Valve

T-Handle Ball Valves in stainless steel or plated brass construction. Handle design allows for easy open/close control. Available in 1/4” to 1/2” FNPT sizes.

Description RETAIL 1/4” FPT Micro Valve....................... $14.27 3/8” FPT Micro Valve....................... 14.27 1/2” FPT Micro Valve....................... 15.14 1/4” FPT x 1/4” MPT Micro Valve.... 14.27 3/8” FPT x 3/8” MPT Micro Valve.... 14.27 1/2” FPT x 1/2” MPT Micro Valve.... 15.14 1/4” Hose Barb Micro Valve............ 14.27 3/8” Hose Barb Micro Valve............ 14.27 1/2” Hose Barb Micro Valve............ 15.14 3/4” Hose Barb Micro Valve............ 15.14 3/4” MPT x 3/4” HB Micro Valve...... 15.14

RETAIL

“T” Handle High Pressure Ball Valves 2038

LVHB025V

Polypropylene Micro Valves

100952

Parker US Made valves are rated to 1500-2000 PSI and 150° F.

Carbon Steel Ball Valves are ideal for use in industrial and hydraulic applications. Hex body style allows for ease of installation.Carbon steel body with stainless ball and stem. Excellent corrosion-resistance when used with fuels and hydraulic fluids. All valves are FPT threads and have teflon packings.

• Standard Viton® Seats & O-Rings

High Pressure Carbon Steel Ball Valves 1A127

LV025V

• 90° Rotating Handle, 150 PSI W.P.

•

www.dultmeier.com

• DAVENPORT, IA

Micro Valve RETAIL Locking, 3/4” Hose Barb x 3/4” MPT. $ 19.70 Locking, 3/4” Hose Barb x 1” MPT.... 19.97 Locking, 3/8” FPT x 1/2” MPT........... 19.70

(800) 553-6975

E0328

Stainless Ball & Gate Valves Stainless Ball Valves

1000 PSI

High Pressure Stainless Ball Valves

316 Stainless Steel FULL PORT • 2 Piece

316 Series Valves (ASTMA351CF8M) - Full Port • Locking Handle • 316 Stainless Cast Components • 2-Piece Construction • Factory rated at 1000 PSI W.O.G. • Polished stainless ball • PTFE Seats • Maximum temperature to 400° F. at 200 PSI.

Part No. Size PSI RETAIL GN 316-14 1/4" 1000 $ 17.55 GN 316-38 3/8" 1000 17.55 GN 316-12 1/2" 1000 17.82 GN 316-34 3/4" 1000 24.25 GN 316-100 1" 1000 37.39 GN 316-114 1-1/4" 1000 53.87 GN 316-112 1-1/2" 1000 61.64 GN 316-200 2" 1000 93.13 GN 316-300 3" 1000 301.50

316 Stainless Steel Ball Valves (ASTMA351CF8M) rated to 1500 to 2000 PSI W.O.G. Two-Piece, construction. D Locking handle. PTFE seats and stem seal. Maximum temperatures to 425° F. (Maximum 150 psi for use with steam). Part No. GN 2P281 GN 2P280 GN 2P282 GN 2P283 GN 2P284 GN 2P285 GN 2P286 GN 2P287

10% Discount on 10+ Assorted & 15% Discount on 25+ Assorted

FPT Ports 1/4" 3/8" 1/2" 3/4" 1" 1-1/4" 1-1/2" 2"

3 Piece Full Port Valves

1000 PSI

RETAIL

GN 2Q14 1/4" FPT GN 2Q38 3/8" FPT GN 2Q12 1/2" FPT GN 2Q100 1" FPT GN 2Q112 1-1/2" FPT GN 2Q200 2" FPT GN 2Q300 3” FPT GN 2Q400 4” FPT

$ 32.96 32.96 38.06 64.05 133.33 180.57 501.16 829.46

Features: Standard construction • Full Port, blow-out proof stem • Teflon Internals • FPT Ports • 1000 PSI W.O.G. • 3-Piece construction (removable center section) makes in-line cleaning simple & quick • Rated to 29 in vacuum.

3 Way Ball Valves 1000 PSI

Stainless • Brass

3-Way Ball Valves are designed to divert flow in different directions as needed. All valves are “L” style, but “T” style are also available. These valves D are ideal for use in a variety of chemical and liquid applications. Locking handles and female FPT ports are standard. All valves are manually operated, but include mounting pads for actuators or position indicators if required. Stainless Valves are rated to 1000 PSI W.O.G. and 200° F. at 1000 PSI or 300° F. at 400 PSI. Body, ball and stem are 316SS. Seat ring, stem, washers and packings are teflon. Handle is 304SS. Brass Valves are rated to 400 PSI W.O.G. and temperatures to 300° F. Body, bushing and stem are brass. Ball is chrome-plated brass. Seats, seals and o-rings are Teflon or Viton®. Handle is steel.

Part No. Size Type PSI RETAIL SM 3304-25 1/2" Brass 400 $ 38.19 EV BBV75TW 3/4" Brass 400 62.04 EV BBV100TW 1" Brass 400 96.48 EV BBV125DTW 1-1/4" Brass 400 131.99 EV BBV150DTW 1-1/2" Brass 400 205.02 EV BBV200DTW 2" Brass 400 304.18 EV BBV300DTW 3” Brass 400 1006.34 TW 76-1/4 1/4” 316SS 1000 100.50 TW 76-3/8 3/8” 316SS 1000 89.11 TW 76-1/2 1/2” 316SS 1000 99.83 TW 76-3/4 3/4” 316SS 1000 107.20 TW 76-1 1” 316SS 1000 157.79 TW 76-1-1/2 1-1/2” 316SS 1000 282.74 TW 76-2 2” 316SS 1000 385.92

IND

RETAIL $ 25.86 25.86 25.86 40.47 53.20 81.07 99.16 137.69

10% Discount on 10+ Assorted & 15% Discount on 25+ Assorted

DULTMEIER SALES • OMAHA, NE

- Large Size for Bulk Storage Use -

Ball

Locking Handle Size

1500 to 2000 PSI

Gate & Ball Valves

• 3-Piece Construction for Simple In-Line Cleaning & Maintenance

Part No.

Max. Pressure 2000 PSI 2000 PSI 2000 PSI 2000 PSI 2000 PSI 1500 PSI 1500 PSI 1500 PSI

316 Stainless Steel STANDARD PORT 2- Piece

Stainless Steel Flanged

316 Stainless Steel

• Rated to 1,000 PSI • 300° F.

(800) 228-9666

Ball Valves are 150# full port split body two-piece design. 316 Stainless body and Teflon seat. Temperature: -60˚ F. to 450˚ F. Rated 200 PSI at 400˚ F. ANSI flanges. Standard with handle operation. (Gear or air actuator available).

Gate

Gate Valves are 150# flanged, full flow with Teflon seat and rising stem design. 316 Stainless body. No locking feature-use chain through hand wheel around pipe. ANSI flange. Part No. KE BVF150-2 KE BVF150-3 KE BVF150-4 KE BVF150-6 KE BVF150-8 KE GTF-2 KE GTF-3 KE GTF-4 KE GTF-6 KE GTF-8

Description 2" SST Flanged Ball Valve 3” SST Flanged Ball Valve 4" SST Flanged Ball Valve 6" SST Flanged Ball Valve 8" SST Flanged Ball Valve 2" SST Flanged Gate Valve 3” SST Flanged Gate Valve 4" SST Flanged Gate Valve 6" SST Flanged Gate Valve 8" SST Flanged Gate Valve

Wt. RETAIL 19 lbs. $ 389.94 43 lbs. 794.62 68 lbs. 1149.72 160 lbs. 2201.62 193 lbs. 6267.18 25 lbs. 653.92 50 lbs. 928.62 75 lbs. 1306.50 142 lbs. 2421.38 220 lbs. 3766.74

Carbon Steel Flanged

Ball & Gate Valves BVF150CS Series Full Port Ball Valves are rated to 200 PSI at 350° F. Class 150, ANSI flanges are standard. Blowout proof stem. Carbon steel body with stainless ball and stem. Teflon packing. 2” through 8” shown but larger sizes are available.

Part No. KE BVF150-2-CS KE BVF150-3-CS KE BVF150-4-CS KE BVF150-6-CS KE BVF150-8-CS

Ball Valve -Carbon Steel Wt. RETAIL 2” CS Flanged Ball Valve........ 20 lbs. $ 272.02 3” CS Flanged Ball Valve........ 40 lbs. 519.92 4” CS Flanged Ball Valve........ 63 lbs. 746.38 6” CS Flanged Ball Valve........ 169 lbs. 1330.62 8” CS Flanged Ball Valve........ 292 lbs. 3552.34

GTFCS Series Gate Valves are rated to 200 PSI at 400° F. Class 150, ANSI flanges are standard (other classes available). Rising stem, non-rising hand wheel. Fully guided, flexible wedge. Bolted bonnet. Carbon steel construction. 2” through 8” shown but larger sizes are available.

Part No. KE GTF-2CS KE GTF-3CS KE GTF-4CS KE GTF-6CS KE GTF-8CS •

www.dultmeier.com

Gate Valve - Carbon Steel 2” CS Flanged Gate Valve....... 3” CS Flanged Gate Valve....... 4” CS Flanged Gate Valve....... 6” CS Flanged Gate Valve....... 8” CS Flanged Gate Valve....... • DAVENPORT, IA

(800) 553-6975

Wt. RETAIL 40 lbs. $ 289.44 75 lbs. 400.66 110 lbs. 558.78 171 lbs. 832.14 269 lbs. 1169.82

E0327

Gate Valves & Dry Break Couplers

Brass Gate Valves

Dry Break Flush Face Couplings

Brass Gate Valves with non-rising stem, screwed bonnet, solid wedge disc and full flow. For general service on water, steam, oil and gas lines. Up to 200 PSI non-shock cold water, oil or gas lines. Inlets: FPT.

Polypropylene and Stainless Steel

Part No.

FPT Ports

Max. PSI

RETAIL

TW GV-1/2 1/2" 200 $ 6.53 TW GV-3/4 3/4" 200 7.04 TW GV-1 1" 200 10.52 TW GV-1-1/4 1-1/4" 200 25.73 TW GV-1-1/2 1-1/2" 150 23.05 TW GV-2 2" 150 32.83 TW GV-2-1/2 2-1/2” 125 76.38 TW GV-3 3" 125 103.18 TW GV-4 4” 125 160.47

D D

1" COUPLER

1" NIPPLE

Celcon Body with polypropylene Solid Wedge Gate Valve, Viton® O-Rings: For fertilizer and chemical service. Non-rising stem. Self-lubricating and rust proof. Chemical resistance. For pressures to 150 PSI. Celcon is an poly acetyl material. * Std. Part No. FPT Ports Pkg. RETAIL BP 2502 3/4" 20 $ 29.48 BP 2503 1" 16 37.12 *10% Discount on Std. Pkg. Orders

Specifications: Seals are Viton® • Operating temperature is 40° F. to 140° F. (-15° to 400° F.). • Stainless internals • Coupler and Nipple are date coded for removal before date shown • Special threaded nipples available for bulk tank connection. Part No. PA PF1001-16FP 1" Poly Coupler......................... PA PF1002-16FP 1" Poly Nipple............................ PA PF1002-32MB 1" FPT x Buttress Thread, Poly. PA PF1002-32MP 1" FPT x Modified NPT, Poly..... PA FS1001-16FP 1” S.S. Coupler.......................... PA FS1002-16FP 1” S.S. Nipples...........................

1" • 1-1/2" • 2" Sizes

CONSTRUCTION: • 316 Stainless Steel Construction • FKM, EPDM Face Seals • 100% Teflon Ball Seats • BSP Threaded Available

• Investment Cast Stainless Body, 316SS • Non-Rising Stem • Solid Wedge Disc; Screwed Bonnet

• PTFE (Teflon) Stem Packing & Seal

Built In Safety Features:

• Aluminum Handwheel

Prevents accidental spills and exposure. When liquid is flowing, halves cannot be uncoupled without turning handles to closed position. When halves are apart, handles cannot be turned to open position.

• 200 PSI Working Pressure (WOG) • Maximum Temperature is 350° F.

Part No. WS 8461 WS 8462 WS 8463 WS 8464 WS 8465 WS 8466

Description RETAIL 1/2” FPT Stainless Gate Valve........... $ 33.23 3/4” FPT Stainless Gate Valve........... 42.48 1” FPT Stainless Gate Valve.............. 47.84 1-1/4” FPT Stainless Gate Valve........ 71.69 1-1/2” FPT Stainless Gate Valve........ 88.44 2” FPT Stainless Gate Valve.............. 118.59 3” FPT Stainless Gate Valve.............. 675.36

• Designed for Potable Water Lines, Irrigation Systems & Other Uses (Water Only) • Non-Rising Stem Design for Compact Spaces • Coated Bodies (AAWA, C-550 & FDA Compliant) • Ductile Iron Wedge (ASTM A536, Gr. 65-45-12) with EPDM Coating • EPDM Elastomers (FDA Approved) • Bronze Stem (ASTM B584, CDA 862) • 250 PSI W.P. & 140° F. Maximum Temperature • 125# Flange Ends (ANSI/ASME B16.1) Description 2-1/2” DI Flanged Gate Valve................... 3” DI Flanged Gate Valve.......................... 4” DI Flanged Gate Valve.......................... 6” DI Flanged Gate Valve.......................... 8” DI Flanged Gate Valve.......................... 10” DI Flanged Gate Valve........................

DULTMEIER SALES • OMAHA, NE

(800) 228-9666

•

Male & Female shown coupled together. Each half sold separately.

RETAIL $ 402.00 485.08 485.08 730.30 1108.18 1108.18 730.30 948.72 1108.18 1440.50 1419.06 1108.18

Polypropylene Dry Break Couplers Prevents Accidental Spills and Exposure Features: Shown with FPT Connections Viton® is a registered trademark of DuPont Performance Elastomers

Part No.

TK DM150A TK DM150D TK DM200A TK DM200D TK DM200ACF TK DM200DCF TK DM220A TK DM220D

RETAIL $ 683.40 789.26 865.64 1226.10 1792.92 2606.30

Viton® is a registered trademark of DuPont Performance Elastomers

IND

Part No. TK DM100ASS 1" Male Half, NPT , Teflon...................... TK DM100DSS 1" Female Half, NPT, FKM.................... TK DM100DSSE 1" Female Half, NPT , EPDM................. TK DM150ASS 1-1/2" Male Half, NPT, Teflon................. TK DM150DSS 1-1/2" Female Half, NPT, FKM............... TK DM150DSSE 1-1/2" Female Half, NPT, EPDM............ TK DM200ASS 2" Male Half, NPT, Teflon........................ TK DM220ASS 2” FP Male Half, NPT, Teflon.................. TK DM200DSS 2" Female Half, NPT, FKM..................... TK DM220DSS 2” FP Female Half, NPT, FKM................ TK DM220DSSE 2” FP Female Half, NPT, EPDM............. TK DM200DSSE 2" Female Half, NPT, EPDM...................

Ductile Iron Flanged Gate Valves

RETAIL $ 100.50 79.06 86.43 84.42 751.74 266.66

Stainless Dry Break Valves

Stainless FPT Gate Valves

Part No. EV SSGV50 EV SSGV75 EV SSGV100 EV SSGV125 EV SSGV150 EV SSGV200 EV SSGV300

SPECIFICATIONS 1" Poly 1” S.S. PSI 30 2000 GPM 20 50 Spill ML 1.0 .250

Pioneer Disconnect Couplings virtually eliminate fluid loss on disconnect and allow easy reconnection. They are designed to meet the demand for closed transfer systems with minimal environmental contamination. The push-to-connect design and flush valving enables easy use and cleaning. Available in polypropylene and stainless.

Celcon Gate Valves

FOR • Pesticides • Herbicides • Fungicides • Insecticides

www.dultmeier.com

• Unrestricted 1-1/2" or 2” flow • Minimal fluid spillage • Cannot be uncoupled in open position • 100 PSI @ 70° F. • FKM Seals/Teflon Seats (Kalrez available). • 316 Stainless Cams • Dust Covers Included. Flow RETAIL

1-1/2" Male Adapter x 1-1/2” FPT.... 1-1/2" $ 181.91 1-1/2" Female Coupler x 1-1/2” FPT 1-1/2" 193.97 2" Male Adapter x 2” FPT................ 1-1/2" 181.91 2" Female Coupler x 2” FPT............ 1-1/2" 193.97 2” Male Adapter x 2” Flange............ 1-1/2” 183.25 2” Female Coupler x 2” Flange........ 1-1/2” 193.97 2” FP Male Adapter x FPT............... 2” 207.70 2” FP Female Coupler x FPT........... 2” 241.20

• DAVENPORT, IA

(800) 553-6975

E0861

Ball Valves • Air Actuated Ball Valves Air Actuated Stainless Ball Valves

Air Actuated Stainless Ball Valves

- 2-Piece These Stainless Air Actuated Valves incorporate a full port 2-piece stainless steel ball valve for great flow rates with minimal pressure drop. The valve features a blowout proof stem for added safety, reinforced PTFE seats and seals for longer life, and a 316 SS (ASTM CF8M) ball for better performance. Actuators are direct mounted creating a compact assembly for tight spaces.

DA Double Acting Actuator Models use an air supply to drive the valve open and closed. The actuator has two supply ports, with one driving the valve open and the other driving the valve closed. The SR Spring Return Models use the air supply to open the valve and internally loaded springs return the valve to the closed position when air supply is cut off.

316SS • 3-Piece 3-Piece construction allows for quick and easy in line cleaning. 316 Stainless steel investment casting and stem ball. Teflon seat, seal and stem packing. Standard with double-acting pneumatic actuators (spring return & electric available). Rated to 1,000 PSI liquid. 120 PSI air pressure to actuator. Temperatures to 390° F. (Spring return also available). Part No. Size Max. PSI RETAIL GN 2K12 1/2" FPT 1,000 $ 196.65 GN 2K34 3/4” FPT 1,000 207.70 GN 2K100 1” FPT 1,000 237.18 GN 2K112 1-1/2” FPT 1,000 351.08 GN 2K200 2” FPT 1,000 423.44 GN 2K300 3” FPT 1,000 925.94

Applications: • Gas or Liquid Flow Control • Ideal for Quick Bubble Tight Shut-Off

1/2” - 2” • 1,000 PSI • 2-1/2” - 4” • 800 PSI - 3-Piece -

Also available with electric actuators (weather-proof or explosion-proof). Electric solenoids and limit switches. - Double Acting Description RETAIL 1/2” Stainless Ball Valve................. $ 155.44 3/4” Stainless Ball Valve................. 162.14 1” Stainless Ball Valve.................... 235.84 1-1/4” Stainless Ball Valve............. 318.92 1-1/2” Stainless Ball Valve............. 356.44 2” Stainless Ball Valve.................... 403.34 3” Stainless Ball Valve.................... 932.64

Part No. Size *CV PSI RETAIL GN 2R12 1/2" 12 1,000 $ 249.24 GN 2R34 3/4" 30 1,000 293.46 GN 2R100 1” 65 1,000 377.88 GN 2R112 1-1/2” 205 1,000 679.38 GN 2R200 2” 380 1,000 812.04 * CV = Flowrate at 2 PSI Drop.

Air Actuated Pilot Valves

3-Piece Sanitary Stainless Ball Valves

Stainless Steel Air Operated Pilot Valves are ideal for air, gas, steam or liquid applications. High flow rates due to the angle flow path which minimizes pressure drop through the valves.

1,000 PSI Rating Features:

• Tri-Clamp Design.

Features: 304SS Valve body, (316SS available) • Double acting, aluminum actuator with visual indicator (single acting available) • NPT ports are D standard, but tri-clamp, butt weld or ANSI flange ports are available • Rated from -20° to +400° F. • Operating pressures to 230 PSI • Air actuators operate from 43 to 115 PSI • Air ports are 1/8” FPT • Viton® and Teflon seals are standard.

• FDA Approved.

Part No.

• 316SS Body, Ball & Stem. • Blow-Out Proof Stem. • Live-Loaded Stem Packing. • 15% Glass Reinforced PTFE Seats. • Lockable Handle. D

Part No. GN 2S34 GN 2S100 GN 2S112 GN 2S200 GN 2S300

IND

3-Piece construction allows for quick and easy in line cleaning. Stainless steel body and stem with Viton® seal. Tri-clamp end connections for easy line removal. 80 - 130 PSI double acting anodized aluminum actuators (spring return also available). Teflon seats, body seal and thrust washer. Note: Not “3A” rated - call if 3A valves are needed.

Air-Actuated - Spring Return Part No. Description RETAIL KC 830650SR 1/2” Stainless Ball Valve............ $ 196.65 KC 830651SR 3/4” Stainless Ball Valve............ 243.88 KC 830652SR 1” Stainless Ball Valve............... 265.32 KC 830655SR 1-1/4” Stainless Ball Valve........ 347.06 KC 830653SR 1-1/2” Stainless Ball Valve........ 384.58 KC 830654SR 2” Stainless Ball Valve............... 483.74 KC 830656SR 3” Stainless Ball Valve............... 1126.94

Locking Handle

Size 3/4" 1” 1-1/2” 2” 3”

Air Actuated Sanitary Tri Clamp Stainless Ball Valves

Features: Capable of being configured to fit most any application • Vented ball to reduce operating torque • Full port design reduces the pressure drop across the valve. Rated to 1000 PSI at 250° F. and 29” vacuum.

Air-Actuated Part No. KC 830650 KC 830651 KC 830652 KC 830655 KC 830653 KC 830654 KC 830656

PSI 1,000 1,000 1,000 1,000 1,000

Wt. 2 lbs. 2 lbs. 4 lbs. 7 lbs. 10 lbs.

DULTMEIER SALES • OMAHA, NE

KG 734904-15 KG 734905-20 KG 734905-25 KG 734906-32 KG 734908-40 KG 734908-50 KG 734910-65

RETAIL $ 54.54 143.05 249.24 369.84 996.96

(800) 228-9666

•

www.dultmeier.com

Description RETAIL

1/2” FPT Stainless Pilot Valve with Actuator .............. $ 108.54 3/4” FPT Stainless Pilot Valve with Actuator .............. 123.95 1” FPT Stainless Pilot Valve with Actuator ................. 135.34 1-1/4” FPT Stainless Pilot Valve with Actuator ........... 191.62 1-1/2” FPT Stainless Pilot Valve with Actuator ........... 226.46 2” FPT Stainless Pilot Valve with Actuator ................. 290.78 3” FPT Stainless Pilot Valve with Actuator ................. 402.00

• DAVENPORT, IA

(800) 553-6975

E1150

Brass Lever • Piston • Ball Valves

Brass Ball Valves

Brass Lever Valves Quick Opening, Full-Port Lever Valves are ideal for vacuum trucks, honey wagons, etc. Durable brass construction. Available in 2” to 6” female x female NPT threads or in 4” flange x female NPT. 2” to 6” Valves are rated to 45 PSI. 6” Valves are rated to 22 PSI.

Hot Water Flow Port

1040MZ

Quantity Discount Available On Some Sizes. Standard Features Include:

H Series Outlet 2” FPT 2” FPT 3” FPT 3” FPT 4” FPT 4” FPT 4” FPT 4” FPT 6” FPT 6” FPT 6” FPT

Brand MZ RIV MZ RIV MZ RIV MZ MZ MZ RIV MZ

Brass bodies, blow out proof, chrome plated stem balls, and

Wt. RETAIL 4 lbs. $ 103.18 4 lbs. 86.43 9 lbs. 155.78 9 lbs. 154.44 15 lbs. 227.80 15 lbs. 207.70 15 lbs. 474.36 15 lbs. 251.92 27 lbs. 373.86 27 lbs. 336.34 27 lbs. 615.06

plated steel handles. Ratings are 600 PSI WOG. Rated to +250° F.

Full Flow Brass Ball Valves 600 PSI

* Flow Chamber Ports

Brass Ball Valves from Parker. An ideal choice for industrial applications including gasoline and diesel fuel. Forged brass body, chrome-plated ball, PTFE seals and blow-out proof stems are standard. Rated to 600 PSI at 200° F. on 1/4” to 1” sizes and 450 PSI on 1-1/4” to 2” sizes. (All valves are rated up to 350° F. at lower pressures).

Brass Piston Valves Heavy-Duty, Brass Piston Valves with or without air or hydraulic cylinders. Available in 4” or 6” female NPT threads or in 4”, 6” or 8” with flanged ports. FPT x FPT Style

Part No. Body FPT Size RETAIL EV FBV25 Brass 1/4" $ 4.18 EV FBV38 Brass 3/8” 4.18 EV FBV50 Brass 1/2” 5.32 EV FBV75 Brass 3/4" 8.64 EV FBV100 Brass 1" 12.80 EV FBV125 Brass 1-1/4" 18.83 EV FBV150 Brass 1-1/2" 24.19 EV FBV200 Brass 2" 40.33 EV FBV250 Brass * 2-1/2" 98.49 EV FBV300 Brass * 3" 117.92 EV FBV400 Brass * 4" 193.63 * 400 PSI on 2-1/2” - 4”

H Series Valves feature ports for warm solution to flow through valve to prevent freeze up. Part No. Inlet CB 1039MZ 2” FPT CB 1039RIV 2” FPT CB 1040MZ 3” FPT CB 1040RIV 3” FPT CB 1041MZ 4” FPT CB 1041RIV 4” FPT CB 1041-000H * 4” FPT CB 1041FL 4” Flange CB 1060MZ 6” FPT CB 1060RIV 6” FPT CB 1060-000H * 6” FPT

2-Piece - Full Port

FBV Series Full Flow Brass Ball Valves are used for control of water, oil, air and gas in hose or pipe lines. For industrial and commercial applications.

New improved design features a thicker gate to eliminate annoying leaks. FPT valves are rated to 60 PSI. Flange valves are rated to 45 PSI on 4” and 6” and 22 PSI on 8”.

Part No. FPT Ports Maximum PSI RETAIL PA XV500P4 1/4" 600 $ 18.22 PA XV500P6 3/8” 600 17.82 PA XV500P8 1/2” 600 18.22 PA XV500P12 3/4” 600 29.08 PA XV500P16 1” 600 36.18 PA XV500P20 1-1/4” *600 58.69 PA XV500P24 1-1/2” *600 79.06 PA XV500P32 2” *600 113.90 * Rated to 600 PSI at 100° F. or 450 PSAI at 200° F.

Polypropylene Ratchet Valves

These valves include a “quick open”, “quick close” feature to be used with a rope. Excellent resistance to agricultural chemicals, acids and caustic solutions. Ball, body, shaft and end caps are glass-filled polypropylene. O-ring shaft seal is Viton®. S.S. position indicator and ratchet handle are stainless steel.Teflon seat. 125 PSI W.P.

Flange x Flange Style NOTE: “H” in the part number is for Hydraulic in this section. Different from above. Piston Valves (FPT x FPT) Part No.

Ports

CB 1045 CB 1045A CB 1045H CB 1046 CB 1046A CB 1046H

4” FPT Piston Valve Only.................. 4” FPT Valve with Air Cylinder.......... 4” FPT Valve with Hydraulic Cylinder 6” FPT Piston Valve Only.................. 6” FPT Valve with Air Cylinder.......... 6” FPT Valve with Hydraulic Cylinder

Wt.

RETAIL

Part No.

Ports

BV 4011T-20 1-1/4" Full Port BV 4011U-20 1-1/2" Full Port BV 4011V-20 2" Standard Port

13 lbs. $ 140.37 21 lbs. 434.16 21 lbs. 332.32 20 lbs. 254.60 29 lbs. 556.10 29 lbs. 505.18

Wt.

RETAIL

3 lbs. $ 164.49 3 lbs. 164.49 3 lbs. 164.49

We now have our Catalogs as well as Parts Schematics online!

Piston Valves (Flange x Flange) Part No.

Ports

CB 2003 CB 2003A CB 2003H CB 2002 CB 2002A CB 2002H CB 2008 CB 2008A CB 2008H

4” Flange Piston Valve Only.................. 4” Flange Valve with Air Cylinder........... 4” Flange Valve with Hydraulic Cylinder 6” Flange Piston Valve Only.................. 6” Flange Valve with Air Cylinder........... 6” Flange Valve with Hydraulic Cylinder 8” Flange Piston Valve Only.................. 8” Flange Valve with Air Cylinder........... 8” Flange Valve with Hydraulic Cylinder

IND

Wt.

DULTMEIER SALES • OMAHA, NE

RETAIL

13 lbs. $ 234.50 21 lbs. 410.04 21 lbs. 369.84 19 lbs. 254.60 28 lbs. 470.34 28 lbs. 438.18 40 lbs. 728.96 50 lbs. 751.74 50 lbs. 734.32

(800) 228-9666

www.dultmeier.com

•

www.dultmeier.com

• DAVENPORT, IA

(800) 553-6975

E0811

Globe Valve • Ball Valves • Air Valves “MAC” - Air Control Valves

Plastic Globe Valve 900W Plastic Globe Valve is molded of Celanese acetal copolymer, a new miracle engineering material. This valve will not rust or corrode. The operating temperature range is -20° to +180° F. Self-lubricating.The design eliminates the need for a seat washer. Positive shut-off. 3/4" FPT.

900W

Std. Std.Pkg. Part No. Threaded Pkg. Discount

RETAIL

BP 900W Globe Valve

$ 8.11

3/4" FPT

10%

MAC 1800 Series Air Control Valves are designed to be used with pneumatic actuators to operate butterfly valves from a remote location. Available in either lever or palm button styles.Valves are available in either individual nonstackable or stackable design. Stackable valves can be gang mounted but require the end plate kit for each series of stacks. (I.E. One plate kit can “stack” 2, 3, 4, 5, valves etc.) Aluminum construction. Ports are 1/4" FPT. Valves are two position and 4-way.These valves D have a push/pull to activate one way or the other. Note: Pre-assembled stock assembly also available. Note: (3) Openings on Bottom Part No.

PVC Union Style Ball Valves PVC Union Valves feature easy installation with hand tighten union nuts that allows for line break down if needed. Full port design means minimum flow restrictions. Mounting pads can accept electric or pneumatic actuators. Socket and threaded ends included to meet plumbing needs. Seat is teflon. O-rings are Viton®. Schedule 80 PVC. 150 Psi W.O.G. Has both Slip and FPT ports.

DU 181-112-025 DU 181-122-025 DU 182-112-039 DU 182-122-039 DU M080010301 DU N375 DU 811C-PM

Stackable

RETAIL

— Polypropylene —

Slip

Banjo Air-Actuated Shut Off Valves are standard on some application equipment. They are available in 3/4" and 1" sizes with either EPDM or Viton® internals. Air supply connection is 1/4" FPT and 70 PSI. Maximum is 70 PSI @ 140° F. Minimum is 20 PSI.

FPT

Part No.

PVC Ball Valves

- Import -

Economical PVC Ball Valves for a wide variety of applications. Corrosionresistant schedule 80 PVC with EPDM seats and o-rings. Rated to 150 PSI W.O.G. Threaded female ports. NSF approved.

TK PV075 TK PV075V TK PV100 TK PV100V TK PV100-075 TK PV100-075V TK PV100-075B

Description

RETAIL

3/4" x 3/4" Poly Shut Off Valve, EPDM .... $ 67.00 3/4" x 3/4" Poly Shut Off Valve, VITON® . 119.93 1" x 1" Poly Shut Off Valve, EPDM .......... 67.00 1" x 1" Poly Shut Off Valve, VITON® ....... 119.93 3/4" x 1" Poly Shut Off Valve, EPDM ....... 67.00 3/4" x 1" Poly Shut Off Valve, VITON®..... 119.93 1” x 3/4” Poly Shut Off Valve with 3/4” Female Coupler, EPDM .................... 86.43

Service Saddles for Air Purge

Part No. FPT Ports RETAIL JO 210-203 1/2" $ 2.83 JO 210-204 3/4” 3.36 JO 210-205 1” 4.45 JO 210-206 1-1/4” 5.25 JO 210-207 1-1/2” 8.51 JO 210-208 2” 10.79 JO 210-210 3” 44.22 JO 210-211 4” 84.42

Valve Style

Lever style No $ 83.75 Lever style Yes 95.81 Palm button No 83.08 Palm button Yes 90.45 End Plate Kit — 54.00 Exhaust Muffler - 3/8" MNPT 8.51 120V Air Solenoid Valve 118.59

Air-Actuated Shut Off Valves

- Import -

FPT & Part No. Slip Ports RETAIL JO 210-543 1/2" $ 7.71 JO 210-544 3/4” 9.58 JO 210-545 1” 13.07 JO 210-546 1-1/4” 18.76 JO 210-547 1-1/2” 24.52 JO 210-548 2” 33.50 JO 210-550 3” 105.86 JO 210-551 4” 207.70

Service Saddles provide a quick, convenient way to make service connections to pipe. Use for blow down or injection. Features: Malleable iron casting with corrosion-resistant primer • Buna gasket • Galvanized steel straps • Standard tap size is 3/4" FPT, but is available in a full range to 2". O.D. Range Part No. Size In Inches

KE 91-0223 2" KE 91-2002 3" KE 91-2004 4" KE 91-1087 6" KE 91-1055 * 4” KE 91-1091 * 6”

Spring Return Closing Ball Valves “Deadman's Valve”

Saddle Saddle Saddle Saddle Saddle Saddle

2.35 - 2.63 3.25 - 3.50 4.13 - 4.75 6.50 - 6.63 4.13 - 4.75 6.50 - 6.63

* 2” FPT Tap These Models.

RETAIL

$ 75.71 88.44 82.41 111.22 87.77 141.71

Air Pressure Test & Blow-Out Assembly Valve handle is spring loaded & remains in the closed position unless it is manually held open. Springs back when released. Will prevent product loss in the event of line failure and many other applications requiring a “normally closed” valve. 316 Stainless Steel Construction. Rated to 300° F. and 29” vacuum.

Max. Part No. PSI

KE 76-501-01 KE 76-502-01 KE 76-503-01 KE 76-504-01 KE 76-505-01 KE 76-506-01 KE 76-507-01 KE 76-508-01

2000 2000 2000 2000 2000 1500 1500 1500

Ports

RETAIL

1/4” FPT $ 93.80 3/8” FPT 93.80 1/2" FPT 93.80 3/4" FPT 117.25 1" FPT 141.71 1-1/4” FPT 254.60 1-1/2” FPT 247.90 2” FPT 300.16

This kit will allow users to perform a pressure test on piping systems to check for leaks, or do a blow-out. The package comes unassembled and includes all fittings necessary for hook-up to pipe and air line. Part No. DU 1C023 DU 1C011 DU 1C012 DU 1C013 DU 1C013-LS

Description RETAIL 2" Pipe Test Kit, 2” Saddle......... $ 274.70 3" Pipe Test Kit, 3” Saddle......... 217.08 4" Pipe Test Kit, 4” Saddle......... 207.70 6" Pipe Test Kit, 6” Saddle......... 246.56 Pipe Test Kit Less Saddle.......... 155.44

Viton® is a registered trademark of DuPont Performance Elastomers

IND

DULTMEIER SALES • OMAHA, NE

(800) 228-9666

•

www.dultmeier.com

• DAVENPORT, IA

(800) 553-6975

E0324

Ball & Needle Valves

High Pressure

MIcro / Mini Ball Valves Brass • Nylon Compact Medium Pressure Ball Valves from 1/8" FPT to 3/4" FPT sizes. Brass or Nylon construction. Available in one-way, two-way or three-way flow design. Rated to 180° F. Brass valves include plated metal handles, plated brass balls, Buna-N seals and Teflon seats. 3307-108E is a nylon valve with EP seals and rated to 140° F. * 3306-309 is standard with Teflon seals and rated to 250° F. Stainless rated to 212° F. 235 is rated to 100° F. 235

3307-108E

3395-301

Short Handle

SMV2

3306-301

Stainless

Long Handle

3306-309 Ports

High Quality Needle Valves suitable for most applications in handling gasses and fluids. Precision machined bar stock brass or 303 stainless steel in either globe or angle styles. 2000 PSI maximum pressure on brass and 3000 PSI maximum pressure on stainless steel valves. Teflon seals are rated to 400° F.

D D

Part No.

FPT Max. Orifice Body PSI Flow

RETAIL

SM 012FFBT 1/8" Brass 500 .180" 2-Way DR SMV2-WF1 1/8” 316SS 1000 .180” 2-Way SM 3306-301 1/4" Brass 500 .218" 1-Way SM 3395-301 1/4” Brass 500 .218” 1-Way DR SMV2-WF2 1/4” 316SS 1000 .218” 2-Way SM 3307-108E 1/4” Nylon 125 .312” 2-Way SM 3306-304 3/8" Brass 500 .312" 1-Way SM 3306-309 1/2" Brass 500 .390" 1-Way SM 3306-308 1/2" Brass 250 .375" 2-Way SM 3306-305 3/4" Brass 500 .625" 1-Way SM 235 Plastic Dual Shut-Off with 3/4" GHT Inlet & Outlets............

$ 9.58 26.80 7.57 8.38 26.80 11.59 12.26 17.15 22.78 22.78

Part No.

Style

Ports

Body

GE 3000-1 GE 3000-4 GE 3000-8 GE 3000-10 GE 3000-1AN GE 3000-4AN GE 3000-4SS GE 3000-8SS

Globe Globe Globe Globe Angle Angle Globe Globe

1/8"F x 1/8"F 1/4"F x 1/4"F 3/8"F x 3/8"F 1/2"F x 1/2"F 1/8"F x 1/8"F 1/4"F x 1/4"F 1/4"F x 1/4"F 3/8”F x 3/8”F

Brass Brass Brass Brass Brass Brass Stainless Stainless

3.10 D

Push-Lock Needle Valves Inline Metering Valves with push-lock design for hard wall tubing. Highly durable and fatigue-resistant. Available in 3/8” sizes. Tube x tube and tube x male pipe thread. Rated to 145 PSI and 150° F. White acetal construction. Tube ACEU Style

Tube

MPT D

ACUC Style

Part No.

Tube

Tube O.D.

Style

FPT Max. Size PSI

MA NC6S2F2F Carbon MA NC6S4F4F Carbon MA NC6S6F6F Carbon MA NC6S8F8F Carbon MA NS6S2F2F 316SS MA NS6S3F3F 316SS MA NS6S4F4F 316SS MA NS6S6F6F 316SS MA NS6S8F8F 316SS

1/4” 6000 $ 19.83 1/2” 6000 19.83 3/4” 6000 26.26 1” 6000 35.38 1/4” 6000 46.90 3/8” 6000 46.90 1/2” 6000 46.90 3/4” 6000 57.62 1” 6000 100.50

RETAIL

SHIPPING

RETAIL

LM ACUC0606 3/8” Tube x Tube Union LM ACEU0606 3/8” Tube x Tube Elbow LM ACMC0606 3/8” Tube x MPT Union

Ideal for controlling high pressure flows of liquids, gases and fluid solutions. Available in either carbon steel or 316 stainless steel construction with Viton® o-ring and Delrin seal. Rated to 6000 PSI, (10,000 PSI also available in some sizes). Maximum temperatures to 200° F. Ports are FPT x FPT.

Part No. Material

ACMC Style

Tube

RETAIL

$ 16.15 17.89 27.34 32.29 36.72 36.31 46.90 79.73

High Pressure Needle Valves

10% DISCOUNT ON 25 ASSORTED VALVES

Tube

Valves

ANGLE

Black Handle on Angle Valves

Dual Hose Shut-Off

Needle

GLOBE

$ 5.19 5.59 4.78

Viton® is a registered trademark of DuPont Performance Elastomers

IND

DULTMEIER SALES • OMAHA, NE

(800) 228-9666

•

www.dultmeier.com

• DAVENPORT, IA

(800) 553-6975

E1185

Keystone Butterfly Valves & Actuators Keystone Series 221

Wafer Butterfly Valves

Padlock Hole

Keystone Series 221 Butterfly Valves feature rugged quality construction. Lockable handles. Maximum flow area for use in on/off as well as throttling control applications. Standard seat is EPDM with Buna available (both FDA rated). The bonded seat is designed to completely isolate the valve body parts from the liquid. Rounded, hand polished disc and hub edge give full concentric seating without seat obstruction, providing maximum seat life. Note: These valves have a molded-in resilient nonreplaceable seats; suitable for full vacuum applications. (For buna seals add “B” suffix).

Valve Size 2” 2-1/2” 3” *GPM Flow 60 150 262 * Flow rates for water at 1 PSI drop.

221 Series

4” 647

Keystone

Stem: 416 Stainless Steel Disc: 316SS Stainless Steel Body: Ductile Iron Seat: EPDM W.P. Rating: 250 PSI Vacuum Rating: Full

6” 8” 1,590 2,892

Part No. Size Wt. RETAIL KE 906-20 2" 7 lbs. $ 109.88 KE 906-25 2-1/2" 9 lbs. 146.06 KE 906-30 3" 10 lbs. 131.32 KE 906-40 4" 17 lbs. 159.46 KE 906-50 5" 20 lbs. 276.04 KE 906-60 6" 25 lbs. 274.70 KE 906-80 8” 38 lbs. 454.26 KE 906-80G * 8" 41 lbs. CALL KE 906-100 †10” 52 lbs. CALL KE 906-100G *†10” 54 lbs. CALL KE 790-35 Travel Limiter Kit..... 217.08 KE 2-3LOCK Lock Kit 2-3"........... 5.45 KE 4LOCK Lock Kit 4".............. 5.05 KE 6LOCK Lock Kit 6".............. 8.64 * With Manual Gear Operator. † Has 304SS Disc.

NOTE: The EPDM seats used in these valves are not suitable for use with Diesel Fuel. Note: Buna also available. Use “B” suffix. TEMPERATURE RANGE -20˚F to +250˚F PRESSURE to 250 PSI 5% on 5+ One Size

Air Actuated Butterfly Valves Include Keystone Series 221 Butterfly Valves with either Keystone or Matryx Air Actuators. Available in double acting style (air to open and close) or spring return style (air to open, spring closes when air is exhausted). Valves include cast iron bodies, EPDM seats, 316SS stainless discs and 416 stainless stems. Valves are rated to 250 PSI and 250° F. (See more details on valve this page). Air actuators are direct mount (no brackets) and include 1/4” FPT air port D connections. Designed to open/close valves at 80 PSI in most applications (120 PSI maximum air pressure for Matryx actuators; 150 PSI maximum for Keystone actuators). Double DOUBLE ACTING: Acting Part No. Size Type Wt. RETAIL Keystone DU A906-20K 2" Keystone 15 lbs. $ 478.38 DU A906-30K 3" Keystone 17 lbs. 526.62 DU A906-40K 4" Keystone 21 lbs. 557.44 DU A906-60K 6" Keystone 31 lbs. 822.76 DU A906-20M 2" Matryx 15 lbs. 688.76 DU A906-25M 2-1/2" Matryx 14 lbs. 716.90 Spring DU A906-30M 3" Matryx 17 lbs. 710.20 Return DU A906-40M 4" Matryx 21 lbs. 912.54 D DU A906-60M 6" Matryx 31lbs. 987.58 SPRING RETURN: Part No. Size Type Wt. RETAIL DU A906-20KSR * 2” Keystone 15 lbs. $ 576.20 DU A906-30KSR * 3" Keystone 20 lbs. 691.44 DU A906-40KSR * 4" Keystone 21 lbs. 720.92 DU A906-60KSR * 6” Keystone 31 lbs. 1168.48 * Note: These models are air actuated valves with a spring that closes valve, when there is a loss of air pressure.

“Lug” Style Butterfly Valves NOTE: The EPDM seats used in these valves are not suitable for use with Diesel Fuel. Note: Buna also available.

Part No. KE 222-2LUG KE 222-3LUG KE 222-4LUG KE 222-6LUG

Keystone

Size 2” 3” 4” 6”

Double Acting Shown

Wt. 10 lbs. 12 lbs. 19 lbs. 27 lbs.

Part No.

KE 790-003 KE 790-200 KE 790-300 KE 790-600 KE 790-200S KE 790-600S

Pneumatic Actuators Wt. RETAIL For 2" & 2-1/2" Valves, Double Acting 5 lbs. $ 330.98 For 2” - 4” Valves, Double Acting...... 5 lbs. 369.84 For 5" & 6" Valves, Double Acting...... 8 lbs. 521.26 For 8” Valves, Double Acting............. 22 lbs. 663.30 For 3” - 4” Valves, Spring Return...... 12 lbs. 531.98 For 5” - 6” Valves, Spring Return...... 28 lbs. 845.54

Repair Kits Include: Nitrile O-rings, top and bottom spacers and bearings, piston backing pads, support rings and grease tube. For Keystone Actuator Model RETAIL KE RK89U-004 F89U-004 (Mfg’d Starting 2016)............. $ 148.41 KE RK89U-006 F89U-006 (Mfg’d Starting 2016)............. 156.45 KE RK89U-009 F89U-009 (Mfg’d Starting 2016)............. 165.83 KE RK89U-014 F89U-014 (Mfg’d Starting 2016)............. 176.55 KE RK89U-020 F89U-020 (Mfg’d Starting 2016)............. 189.95 Top Arrow (Position Indicator) Kits KE 11112815 Arrow for F89U Actuators...................... $ 22.91 KE 79U-ARROWKIT Arrow & 3 Adapter Kit for 79U Actuators 57.96 Part No.

Flow Control (Restrictor) Valves for Air Actuators

Description

Use to restrict air flow out of or into Air Actuators to slow down and control valve closing speed or opening speed.These one way valves meter out (restrict) the tube fitting. Each valve includes steel MPT inlet, tube fitting outlet and has a tough poly body that can swivel. Steel needle valve provides for precision control by finger or with flathead screwdriver. Locking wheel also included.

RETAIL

Part No. KC 830301 KC 830303

Viton® is a registered trademark of DuPont Performance Elastomers

DULTMEIER SALES • OMAHA, NE

5% on 5+ One Size

Key s t o n e P n e u m a t i c A c t u a t o rs mount directly to 2" thru 6" KEYSTONE Butterfly valves to provide remote operation. No brackets are required. Double Acting Models require two air lines, (one to close & one to open). Spring Return Models close automatically when air is shut off. 1/4" FPT air connections. Supply with 100 PSI air (120 PSI Max.). Sleeve adapters also included. (See Repair Kits Below).

Keystone

KE EPI2-E006A EPI2 Electric Actuator for 2”-4” Valves............. $ 1613.36 KE EPI2-E013 EPI2 Electric Actuator for 6” Valves.................. 1973.82

IND

NOTE: The EPDM seats used in these valves are not suitable for use with Diesel Fuel. Note: Buna & Viton available.

Repair Kits for Pneumatic Actuators

RETAIL $ 160.47 181.91 225.12 357.78

Electric Actuators

Keystone has an extensive range of electric valve actuators including accessories such as positioners, position monitors, control position monitors and solenoid valves to create complete flow control packages. Models below are outdoor rated (Nema 4/4X/6) and run on 120V or 240 VAC single phase and are standard on/ off only (1/4 turn). Manual override hand wheel. Part No.

Keystone “Lug” Style Butterfly Valves offer the same great features and construction as the Series 221 Wafer Style above, except “Lug” Style bodies are drilled and tapped. Allows for isolation and removal of downstream piping at full rated pressure (up to 250 PSI). EPDM seats are standard (Buna also available). 316SS Disc, 416SS stem. Note: These valves have a molded-in resilient non-replaceable seats; suitable for full vacuum applications. (For Buna seals; add “B” suffix).

5% on 5+ One Size

Pneumatic Rotary Actuators

Keystone

Keystone Series 222

222 Series

(800) 228-9666

•

www.dultmeier.com

Inlet & Outlet 1/8” MPT x 1/4” Tube Fitting 1/4” MPT x 1/4” Tube Fitting • DAVENPORT, IA

Use With Actuators With 1/8” FPT Ports With 1/4” FPT Ports

(800) 553-6975

RETAIL $ 23.45 32.43

E1204

Pratt Butterfly Valves • Unitorque Actuators

Pratt OS Series

Air Actuated Butterfly Valves

Wafer Butterfly Valves

Pratt OS Series Wafer Butterfly Valves feature heavy duty construction. Lockable handles. Maximum flow area for use in on/off as well as throttling control applications. Standard seat is EPDM with Buna available.Top flange conforms to ISO5211 industrial standard. Blowout-proof stem meeting API609. Two internally driven shafts create a strong drive connection and a thin profile disc for high flow rates. Note: These valves have a molded-in resilient seats; suitable for full vacuum applications. (Use buna seals for diesel - add “B” suffix).

Valve Size 2” 2-1/2” 3” *GPM Flow 115 196 302 * Flow rates for water at 1 PSI drop.

4” 600

NOTE: The EPDM seats used in these valves are NOT suit able for use with Diesel Fuel. Note: Buna also available for diesel - Use “B” suffix.

Stem: 416 Stainless Steel Disc: 304SS Stainless Steel (316SS available) 6” 8” Body: Ductile Iron 1,579 3,136 Seat: EPDM (Buna & Viton® available) W.P. Rating: 200 PSI Vacuum Rating: Full Part No. PT OS2 PT OS2.5 PT OS3 PT OS4 PT OS5 PT OS6 PT OS8 KE 2-3LOCK KE 4LOCK KE 6LOCK

TEMPERATURE RANGE -20˚F to +250˚F PRESSURE to 200 PSI

5% on 5+ Assorted

Size Wt. 2" 7 lbs. 2-1/2" 9 lbs. 3" 10 lbs. 4" 17 lbs. 5" 20 lbs. 6" 25 lbs. 8” 38 lbs. Lock Kit 2-3"........... Lock Kit 4".............. Lock Kit 6"..............

RETAIL $ 66.33 86.43 89.78 124.62 159.13 214.40 336.34 5.45 5.05 8.64

Includes Pratt OS Water Butterfly Valves with Pratt PV Series Air Actuators. Available in double acting style (air to open and close) or spring return style (air to open, spring closes when air is exhausted). Valves include ductile iron bodies, EPDM seats, 304SS stainless discs and 416 stainless stems. Valves are rated to 200 PSI and 250° F. (See more details on valve this page). Air actuators are direct mount (no brackets) and include 1/4” FPT air port connections. Designed to open/close valves at 80 to 100 PSI in most applications. DOUBLE ACTING: Part No. Size DU A906-20P 2" DU A906-30P 3" DU A906-40P 4" DU A906-60P 6"

OS Lug D

Part No. PT OSL2 PT OSL3 PT OSL4 PT OSL6

Size 2” 3” 4” 6”

Wt. 10 lbs. 12 lbs. 19 lbs. 27 lbs.

5% on 5+ Assorted

NOTE: The EPDM seats used in these valves are NOT suitable for use with Diesel Fuel. Note: Buna also available for diesel - Use “B” suffix.

Pratt PV Series

Pratt PV-Series Pneumatic Actuators mount directly to 2" thru 8" PRATT and KEYSTONE Butterfly valves to provide remote operation. No brackets are required. Aluminum alloy bodies and end caps. Double Acting Models require two air lines, (one to close & one to open). Spr ing Retur n Models close automatically when air is shut off. 1/4" FPT air connections. Supply with 80 to 100 PSI air. Position indicators.

5% on 5+ One Size

Part No.

PT 65DA PT 75DA PT 95DA PT 125DA PT 75SR PT 85SR PT 95SR PT 125SR PT 140SR

Pratt OS “Lug” Style Butterfly Valves offer the same great features and construction as the Wafer Style above, except “Lug” Style bodies are drilled and tapped. Allows for isolation and removal of downstream piping at full rated pressure (up to 200 PSI). EPDM seats are standard (Buna & Viton® also available). 304SS Disc, 416SS stem. Note: These valves have a molded-in resilient seats; suitable for full vacuum applications. (Use Buna seals for diesel - add “B” suffix).

Pratt/Pratt

Pneumatic Actuators

Pratt OS

NOTE: The EPDM seats used in these valves are not suitable for use with Diesel Fuel. Note: Buna also available.

Type Wt./Lbs. RETAIL Pratt/Pratt 15 $ 289.44 Pratt/Pratt 17 333.66 Pratt/Pratt 21 371.18 Pratt/Pratt 31 593.62

SPRING RETURN: Part No. Size Type Wt./Lbs. RETAIL DU A906-20PSR * 2” Pratt/Pratt 15 $ 343.04 DU A906-30PSR * 3" Pratt/Pratt 20 434.16 DU A906-40PSR * 4" Pratt/Pratt 23 550.74 DU A906-60PSR * 6” Pratt/Pratt 33 912.54 DU A906-80PSR * 8” Pratt/Pratt 58 1337.32 * Note: These models are air actuated valves with a spring that closes valve, when there is a loss of air pressure.

“Lug” Style Butterfly Valves

Pneumatic Actuators Wt. RETAIL For 2”- 2-1/2" Valves, Double Acting........ 5 lbs. $ 199.33 For 3” - 4” Valves, Double Acting............. 5 lbs. 218.42 For 5" & 6" Valves, Double Acting............ 8 lbs. 336.34 For 8” Valves, Double Acting................... 22 lbs. 497.14 For 2” Valves, Spring Return................... 12 lbs. 249.24 For 2-1/2” - 3” Valves, Spring Return...... 12 lbs. 313.56 For 4” Valves, Spring Return................... 28 lbs. 363.14 For 6” Valves, Spring Return................... 32 lbs. 598.98 For 8” Valves, Spring Return................... 45 lbs. 869.66

Flow Control (Restrictor) Valves for Air Actuators

RETAIL $ 80.40 111.89 137.69 249.24

Find Us on Facebook and Twitter

Part No. KC 830301 KC 830303

Inlet & Outlet 1/8” MPT x 1/4” Tube Fitting 1/4” MPT x 1/4” Tube Fitting

Use With Actuators With 1/8” FPT Ports With 1/4” FPT Ports

RETAIL $ 23.45 32.43

Viton® is a registered trademark of DuPont Performance Elastomers

IND

DULTMEIER SALES • OMAHA, NE

(800) 228-9666

•

www.dultmeier.com

• DAVENPORT, IA

(800) 553-6975

E0702

Butterfly & Stainless Ball Valves • Actuators Matryx Air Actuators

Keystone 990 Series

Split Body Wafer Butterfly Valves Thin disc, resilient seat, split body (two piece) design allows for easy field replacement of seat & disc/stem. One-piece thin profile disc/stem (316SS) results in maximum flow rates, lowest pressure drops (high CV) and best control capabilities. Suitable for installation between ANSI Class 125/150 flanges. Wafer style cast iron bodies (stainless and lug style also available). Replaceable EPDM seats standard (Buna & PTFE lined available). 150 PSI Not for Vacuum. W.P. Rating 75 PSI Deadhead Valve Size 2” 2-1/2” 3” 4” *GPM Flow 267 451 693 1,314 *Flow rates for water at 1 PSI drop.

Part No. KE 990-20 KE 990-25 KE 990-30 KE 990-40 KE 990-50 KE 990-60 KE 990-80

Keystone

Size 2” 2-1/2” 3” 4” 5” 6” 8”

6” 8” 2,790 5,208

Wt. 6 lbs. 8 lbs. 9 lbs. 11 lbs. 16 lbs. 18 lbs. 30 lbs.

CALL for PRICING

Direct-Mount, Matryx Air Actuators for Butterfly or Ball Valves. DoubleActing, Sliding Vane Design. Direct mounting feature eliminates costly brackets and couplings. This design also reduces overall height of valve assemblies. Only one moving part means more reliable operation. Simple O-ring seal is easy to replace. External stroke adjustment for both directions.

Maximum pressure is 120 PSI. Temperature range is 0° to 225° F. Normal stroke time is from 4 seconds to not less than 1 second. Construction is of light-weight, aluminum die casting. Coating is alkyd enamel. Operating media is air or any non-corrosive gas. FOR Keystone Valves. NOT FOR Watts or Centerline. MX60 is designed for 2", 2-1/2" and 3" Valves. Shaft receptacle is 9/16" x 3/8" for mounting to Keystone butterfly valves. Stroke adjustment is 75° minimum and 112° maximum. MX200 is designed for 4", 5" and 6" Valves. Shaft receptacle is 5/8" x 7/16" for mounting to Keystone butterfly valves. Stroke adjustment is 74° minimum and 110° maximum. Wt. Part No. Valve Size Lbs. RETAIL

Butterfly Valves

600A-6

These valves feature precision-machined parts to assure years of dependable operation. Standard replaceable seat is EPDM, the 316 Stainless Steel discs are machined and polished to assure leak tight shut-off while providing maximum seat life. Pressure rated to 200 PSI. Standard with locking handle and notched top plate. Stem: 316 Stainless Steel Disc: 316 Stainless Steel D

Part No. CL 200A-2 CL 300A-3 CL 400A-4 CL 600A-6

NOTE: The EPDM seats used in these valves are not suitable for use with Diesel Fuel.

Size 2" 3" 4" 6"

Body: Ductile Iron Seat: EPDM Replaceable

Wt. 8 lbs. 12 lbs. 16 lbs. 23 lbs.

RETAIL $ 109.21 147.07 181.91 325.62

Note: You Need to Order Centerline Valve Separately. Part No. CL CD23 CL CD6 CL CD50

Matryx Actuator 2" through 3" 5 Matryx Actuator 4" through 6" 7 Buna Seal Kit - MX60................... Buna Seal Kit - MX200.................

$ 536.00 683.40 161.81 185.93

For Butterfly Valve Flanges Threaded, Slip Weld, Weld Neck In Cast Iron or Stainless Steel

See These Flanges In The Pipe Fitting Section of Our Catalog

Pneumatic Rotary Actuators These air actuators mount directly to 2" through 6" Centerline Valves. Double Acting, aluminum body with 1/4" FPT air connections.

XO MX60 XO MX200 XO 600678 XO 600679

Valve Manifolds & Eductors Available In CS or Stainless Steel

Shown with Centerline Valve that must be ordered separately.- or see below for Package

Size Wt. RETAIL 2" - 3" 6 lbs. $ 282.74 4" 8 lbs. 328.30 6" 13 lbs. 431.48

Call Us With Your Needs

Centerline Air Actuated Valves

SHIPPING

Includes Centerline valves above with Centerline double-acting air actuators installed on valve. Part No. CL 300A-3AA 3” Valve with Actuator.......... CL 400A-4AA 4" Valve with Actuator..........

RETAIL $ 617.74 842.86

Viton® is a registered trademark of DuPont Performance Elastomers

IND

DULTMEIER SALES • OMAHA, NE

(800) 228-9666

•

www.dultmeier.com

• DAVENPORT, IA

(800) 553-6975

E0323

— Low Pressure —

Check Valves

— High Pressure — Brass Check Valves

PVC Spring Check Valves Spring Check Valves for eliminating back flow. For use in horizontal or vertical applications. PVC bodies, stainless springs and EPDM seals. Rated to 150 psi. Ports are female pipe thread. (“Slip” change T to S, also available). Cracking pressure is 1/2 psi. Schedule 40.

— High Pressure — Inline High Pressure Check Valves. Brass construction with Viton® o-ring seal. An ideal choice for protection of back flow on high pressure supply lines. Rated to 3000 PSI. Temperature range to +350° F. Cracking pressure is 10 PSI. Available with female x female or female x male NPT threads as shown.

Part No. Ports RETAIL JK KC50T 1/2" FPT $ 4.31 JK KC75T 3/4" FPT 4.85 JK KC100T 1" FPT 6.77 JK KC125T 1-1/4" FPT 8.51 JK KC150T 1-1/2" FPT 7.30 JK KC200T 2"FPT 10.12 PL S1580-3 3” SLIP 93.80

Part No. MA ICB31M1F MA ICB32M2F MA ICB32F2F MA ICB33F3F MA ICB63M3F MA ICB34F4F

PVC Adjustable Spring Check Valves • Adjustable Spring (Factory Set at 5 PSI) will Retain a Column of Water 12' to 36' Head; 1-1/2 Turn+1 lb. Pressure Adjustment D • FPT Ports, EPDM Gasket • 200 PSI Rating at 72° F. - 140° F. Maximum Temperature Rating. Used in systems where back flow is not desired and where a greater opening pressure is needed: industrial, elevated irrigation lines, swimming pools, spas etc. Opening Body Part No. Size Pressure Length

JK 1205-050 JK 1205-075 JK 1205-100 JK 1205-125 JK 1205-150 JK 1205-200

1/2" 2-5 lbs. 3/4" 2.5-5 lbs. 1" 4-17 lbs. 1-1/4" 4-50 lbs. 1-1/2" 3.5-50 lbs. 2" 1.75-14.5 lbs.

PVC "Swing" Check Valves

Dimensions

1" 5.39 2.18 1.70 1-1/4" 6.31 2.80 2.33 1-1/2" 6.31 2.80 2.33 6.65 3.28 2.80

Part No. Ports JK SC50T 1/2" FPT JK SC75T 3/4" FPT JK SC100T 1" FPT JK SC125T 1-1/4" FPT JK SC150T 1-1/2" FPT JK SC200T 2" FPT JK SC300S 3" Slip JK SC400S 4" Slip

RETAIL $ 17.69 16.08 16.75 18.63 18.89 28.01 59.36 79.06

Low Pressure - Brass & Stainless

W.O.G. Ports are FPT. 316SS stainless steel valves have teflon bonnet seal. Brass valves have BUNA bonnet seals.

Stainless Type

— High Pressure — Inline High Pressure Check Valves. 316SS body and 304SS internals with Viton® o-ring seal. An ideal choice for protection of back flow on high pressure supply lines. Rated to 6000 PSI. Temperature rating to +350° F. Cracking pressure is 10 PSI. Available with female x female or female x male NPT threads as shown.

Part No. MA ICS61M1F MA ICS62M2F MA ICS62F2F MA ICS63F3F MA ICS64F4F

Body 316SS 316SS 316SS 316SS 316SS

Inlet 1/8" FPT 1/4” FPT 1/4” FPT 3/8” FPT 1/2” FPT

Outlet Max. PSI RETAIL 1/8” MPT 6,000 $ 22.38 1/4” MPT 6,000 22.38 1/4” FPT 6,000 21.98 3/8” FPT 6,000 37.39 1/2” FPT 6,000 37.79

Stainless Steel High Pressure “Maxi-Flow “ Check Valves have stainless steel D construction. Positive check, no leaks. Cracking pressure is less than 1 PSI. Maximum flow rate is 4 GPM. Maximum working pressure is 5,000 PSI. Standard with Viton® seal for added chemical resistance. Maximum temperature is 300° F. Overall length is 2.33".

Low Pressure Check Valves for controlling back flow in liquid lines. Brass or Stainless steel construction. Horizontal mounting only. Rated to 200 PSI

Brass Type

Outlet Max. PSI RETAIL 1/8” MPT 3,000 $ 14.87 1/4” MPT 3,000 14.87 1/4” FPT 3,000 14.87 3/8” FPT 3,000 21.98 3/8” MPT 3,000 17.42 1/2” FPT 3,000 25.73

Inline Swing Check Valves

Inlet 1/8" FPT 1/4” FPT 1/4” FPT 3/8” FPT 3/8” FPT 1/2” FPT

Stainless Check Valves

Swing Gate CheckValves provide unobstructed flow. No springs to corrode or fail. PVC construction with D EPDM swing gate. Not for use in vertical installations. Rated to 150 psi. Ports are female pipe thread. (slip x slip ports also available). Opening pressure is 1 PSI. Schedule 40.

Size L H W 1/2" 5.39 2.18 1.70 3/4" 5.39 2.18 1.70

RETAIL

4-1/8” $ 19.03 4-1/8” 17.89 5-1/4” 26.06 6-3/16” 33.77 6-3/16” 35.91 9-3/4” 51.86

Body Brass Brass Brass Brass Brass Brass

Part No. Type FPT Size RETAIL GN 105103 Brass 1/2” $ 4.52 GN 105104 Brass 3/4” 6.90 GN 105105 Brass 1” 11.19 GN 105106 Brass 1-1/4” 24.25 GN 105107 Brass 1/1/2” 30.28 GN 105108 Brass 2” 48.51 GN 105110 Brass 3” 119.26 GN 105111 Brass 4” 183.25 GN 105803 Stainless 1/2” 20.10 GN 105804 Stainless 3/4” 26.93 GN 105805 Stainless 1” 35.78 GN 105806 Stainless 1-1/4” 47.97 GN 105807 Stainless 1-1/2” 68.34 GN 105808 Stainless 2” 88.44 GN 105810 Stainless 3” 541.36

Part No. Inlet AA 7375 1/4" FPT AA 7450 1/4" MPT AA 7462 1/4" MPT AA 7463 1/4" FPT

Outlet 1/4" FPT 1/4" MPT 1/4" FPT 1/4" MPT

Max. PSI 5,000 5,000 5,000 5,000

RETAIL $ 23.99 25.33 26.33 26.33

Hose Barb Stainless Check Valve

Constructed of 302 and 303 stainless for high strength and corrosion resistance. Ball and spring also 302 stainless. 1/4” FPT outlet. 10 PSI opening pressure. Includes #250 stainless orifice disc inside which can be changed by user if desired. 4.0 GPM at 10 PSI or 8.0 GPM at 40 PSI (with included #250 orifice disc).

Part No. Description RETAIL SS 39188 3/8” HB x 1/4” FPT Stainless Check Valve $ 28.14 SS 39188-8400-540SS 1/2” HB x 1/4” FPT Stainless Check Valve 30.82

Viton® is a registered trademark of DuPont Performance Elastomers

IND

DULTMEIER SALES • OMAHA, NE

(800) 228-9666

•

www.dultmeier.com

• DAVENPORT, IA

(800) 553-6975

E0792

Check Valves Prince™ Wafer Check Valves

Polypropylene Check Valves Chemical Resistant Check Valves are constructed of polypropylene. Rated to 125 psi and 140° F. Stainless steel spring. Valves work in either a horizontal or vertical position. Cracking pressure is 1 psi. (1 to 2 PSI on 1” & 2”; 5 PSI on 3”). Part No. FPT Ports Seal RETAIL SM 681-4E 1/4" EPDM $ 8.11 SM 683-6E 3/8” EPDM 8.38 SM 685-8E 1/2" EPDM 8.78 SM 687-12E 3/4" EPDM 9.98 SM 681-4VV 1/4” Viton® 8.38 SM 683-6VV 3/8” Viton® 8.78 SM 685-8VV 1/2" Viton® 9.31 SM 687-12VV 3/4" Viton® 10.52 TK CV100 1” EPDM 16.62 TK CV100MT 1” MPT x 1” FPT EPDM 15.41 TK CV221 2” EPDM 25.46 TK CV300 3” FPT EPDM 37.79

687-12E

Flanged with EPDM Internals TK MCV100 TK MCV200 TK MCV221 TK MCV300

MCV220

Flange Flow Size Dia. PSI RETAIL 1” 1” 300.... $ 15.01 2” SP 1-1/2” 300 19.30 2” FP 2” 200 25.46 3” FP 3” 200 38.73

Check Valves

Part No.

Part No. Pipe Size Seat KE 810-2T 2” Teflon KE 810-3T 3” Teflon KE 810-4T 4” Teflon KE 810-6SB 6” Buna KE 810-6T 6” Teflon

GPM @ 2 PSI Loss 100 280 400 900 900

Wt. RETAIL 4 lbs. $ 202.34 7 lbs. 234.50 11 lbs. 309.54 22 lbs. 491.78 22 lbs. 612.38

Material Brass Brass Brass Brass Brass Brass Brass Brass

High Performance Non-Slam Check Valves with compact wafer bodies. 316 Stainless body and discs with Inconel X-750 springs for maximum corrosion resistance. Valve design meets API 594 Standard. Wafer bodies fit between standard D 150 lb. flanges (ASME B16.5 & B16.47). Rated to 150 PSI working pressure. Temperature rating is -320° to +700° F. Employs (2) independent springs and loaded plates with flat seats (no elastomers) that gives superior performance and a tight shutoff that meets industry standards. Also, plate heel is lifted first by design to prevent seat wear.

RETAIL $ 3.90 5.25 8.38 12.13 15.28 24.52 79.73 125.29

LOW PRESSURE

Bronze Check Valves Bronze Check Valves are designed to allow full fluid flow. Brass disc and Teflon Seat for tightest possible seating capacity. Stainless Steel guide rod and spring. Can be installed horizontally or vertically. Maximum temperature 180° F. Rated @ 125 PSI steam and 400 PSI WOG. Opening pressure is approximately 1/2 PSI. FPT Ports

Wt.

WS 600-1/4 1/4" 0.2 lbs. WS 600-3/8 3/8" 0.2 lbs. WS 600-1/2 1/2" 0.2 lbs. WS 600-3/4 3/4" 0.7 lbs. WS 600-1 1" 1.3 lbs. WS 600-1-1/4 1-1/4" 1.6 lbs. WS 600-1-1/2 1-1/2" 2.5 lbs. WS 600-2 2" 3.1 lbs. WS 600-3 * 3” 13.0 lbs. * Vertical Mount Recommended.

RETAIL

$ 59.63 60.70 42.88 43.55 45.56 62.71 87.77 141.71 655.26

High Quality, 303SS Check Valves for a wide variety of applications.One piece body with FPT ports. Viton® seats for chemical resistance and temperatures to 400° F.

Part No. CD DUO2-SS CD DUO3-SS CD DUO4-SS CD DUO6-SS CD DUO8-SS

Description 2” Duo-Check Wafer Stainless Check Valve......... 3” Duo-Check Wafer Stainless Check Valve......... 4” Duo-Check Wafer Stainless Check Valve......... 6” Duo-Check Wafer Stainless Check Valve......... 8” Duo-Check Wafer Stainless Check Valve.........

RETAIL $ 550.74 797.30 940.68 1637.48 2659.90

Ductile Iron Check Valves FPT x FPT Heavy-Duty, Ductile Iron Check Valves with poppet design that prevents flow reversal. Valves close automatically when pump flow stops. Ideal for use with submersible pumps or any pumping applications where conventional check valves are needed. Designed for vertical mounting. Buna-N seal with stainless spring and poppet are standard. Rated to 400 PSI and 180° F. Ports are Female NPT. Part No. FPT Wt. RETAIL WS 4031DI 1" .2 lbs. $ 29.88 WS 4032DI 1-1/4" .7 lbs. 41.81 WS 4033DI 1-1/2" 1.1 lbs. 56.68 WS 7937 2" 5 lbs. 105.19 WS 7938 3" 10 lbs. 317.58 WS 7939 4" 19 lbs. 493.12 WS 4089 6" 63 lbs. 1273.00

Stainless Steel Check Valves

Part No. Size RETAIL KE 623 1/2" $ 16.08 KE 624 3/4" 21.51 KE 625 1" 32.16 KE 626 1-1/4" 77.05 KE 627 1-1/2" 65.79 KE 628 2" 104.52 KE 629 3” 424.78

Wafer-Style Check Valves are designed for “in-line” mounting. Ideal for water, fertilizer, fuel and other liquids compatible with o-ring seats as shown. Compatible with Class 125 (iron) or Class 150 (steel) flanges. Note: Can be mounted vertically or horizontally. Standard Features Include: Light Weight • Cast Iron Body • Teflon or Buna Seats • 316 Stainless Steel Discs and Internal Springs • Rated to 125 PSI • Cracking pressure is approximately 0.5 PSI.

— Double Disc Design —

Brass Low Pressure Check Valves for protecting against back flow. Cracking pressure is 1/2 PSI. Rated to 200 PSI W.O.G. and 200° F. Female ports. For horizontal installation. Imported.

SPRING LOADED CHECK VALVES

— Single Disc —

Stainless Wafer Body Check Valves

Low Pressure - Brass

Part No. Size SL CV050 1/2” FPT SL CV075 3/4” FPT SL CV100 1” FPT SL CV125 1-1/4” FPT SL CV150 1-1/2” FPT SL CV200 2” FPT SL CV300 3” FPT SL CV400 4” FPT

Ductile Iron Check Valves

MPT x FPT

Same construction and specifications as above but with Male x Female NPT ports. Rated to 400 PSI on 1” through 2” sizes and 200 PSI on 1/2” through 3/4” sizes. 0.5 PSI opening pressure.

Part No. MPT x FPT Wt. WS 4084 2" 4 lbs. WS 4083 3" 8 lbs. WS 4077 4" 14 lbs. WS 4081 6" 40 lbs.

RETAIL $ 192.63 335.00 470.34 950.06

Viton® is a registered trademark of DuPont Performance Elastomers

IND

DULTMEIER SALES • OMAHA, NE

(800) 228-9666

•

www.dultmeier.com

• DAVENPORT, IA

(800) 553-6975

E0329

Foot Valves • Check Valves

Brass Foot Valves

Cast Iron Foot Valves Poly Inlet Screens

Economical Foot Valve designed for use in irrigation, water systems and other applications. Designed to be installed on the suction side of a pump to main pump prime. Spring loaded feature can be installed in any direction. Body is epoxy coated, cast iron construction. Screen is polyethylene for corrosion resistance. Threads are FPT. FPT Part No. Size WS 4764 2" WS 4766 3" WS 4767 4"

Length 3-1/2" 5-1/4" 6-3/8"

Brass Foot Valves with stainless steel screen. Keep lines full without back flow. Part No. FPT Port RETAIL WS CFV075 3/4" $ 5.39 WS CFV100 1" 7.10 WS CFV125 1-1/4" 8.51 WS PFV150 1-1/2" 28.27 WS PFV200 2" 24.92 WS PFV300 3” 55.34 WS PFV400 4” 77.05

Wt. RETAIL 4 lbs. $ 123.28 9 lbs. 222.44 17 lbs. 269.34

Cast Iron Foot Valves

Flanged Style

Cast Iron Inlet Cast Iron Foot Valves are designed for use in irrigation as well as other pumping applications where water may be dirty due to suspended silt and sand. Cast iron construction. Ports are Female NPT for easy installation. Part No. WS 4962 SF FV20B SF FV25B SF FV35B SF FV40B SF FV60B

Size * 1-1/4" 1-1/2” 2” 3” 4” 6”

Wt. 3 lbs. 3 lbs. 6 lbs. 13 lbs. 20 lbs. 45 lbs.

RETAIL $ 178.22 12.06 22.18 37.12 67.67 154.44 Part No. WS 4763BT WS 4769BT WS 4770BT WS 4772BT WS 4774BT

Hose Barb Stainless Check Valve Constructed of 302 and 303 stainless for high strength and corrosion resistance. Ball and spring also 302 stainless. 1/4” FPT outlet. 10 PSI opening pressure. Includes #250 stainless orifice disc inside which can be changed by user if desired. 4.0 GPM at 10 PSI or 8.0 GPM at 40 PSI (with included #250 orifice disc).

**Size *Spring RETAIL

PL 2239-005 1/2" PL 2239-007 3/4" PL 2239-010 1" PL 2239-012 1-1/4" PL 2239-015 1-1/2" PL 2239-020 2" PL 2231-030 3” PL 2231-040 4”

No. 2239

No $ 64.59 No 67.67 No 81.74 No 97.82 No 129.31 No 189.28 No 483.74 No 959.44

Hose Barb Polypropylene Check Valves • Polypropylene Bodies

• Viton® Seals • 316SS Ball

Out Barb

Opening Part No. Hose Barb Pressure (PSI) RETAIL BU CV1101-B14 1/4” 1 $ 15.14 BU CV1101-B38 3/8” 1 15.41 BU CV1103-B38 3/8” 3 16.48 BU CV1101-B12 1/2” 1 15.54 BU CV1103-B12 1/2” 3 14.94

Polypropylene Union Check Valves are 100% leak-proof. Cracking pressure islessthan1PSI.Ratedto150PSIat80°F.,(190°F.at15PSI).Standard withEPDM o-rings , but Viton® also available. Features 304 stainless spring for horizontal or vertical installations. All valves have threaded FPT ports. Made In USA.

FPT Part No. Size

** FPT/Socket Ends

* Valves without springs are for vertical installation only. Valves with springs are for horizontal or vertical installation. ** Valves up to 2” have FPT and glue Socket ends. Valves 3” & 4” have glue Socket ends Only.

IND

Wt. RETAIL 23 lbs. $ 1021.08 37 lbs. 1049.22 63 lbs. 1240.84 100 lbs. 1880.02 160 lbs. 2722.88

Polypropylene Check Valves

**Size *Spring RETAIL

GF 562-12 1/2" Yes $ 92.46 GF 562-34 3/4" Yes 103.18 GF 562-1 1" Yes 113.23 GF 562-114 1-1/4" Yes 136.35 GF 562-112 1-1/2" Yes 168.51 GF 562-2 2" Yes 239.86 GF 562-3 3” Yes 573.52 GF 562-4 4” Yes 1340.00

Height 8-1/2" 9-1/4" 10-3/8" 15-7/8" 20-3/4"

In Barb

PVC “Union” Style Check Valves are 100% leak-proof for positive shut off with less than 1 PSI cracking pressure. All valves have Viton® o-rings, but EPDM also available. Rated to 150 PSI at 80° F. with threaded ends or 230 PSI with socket ends. Rated up to 140° F. with reduction in pressure ratings. (CPVC and Kynar PVDF also available). Made In USA.

Part No.

Size 2" 3" 4" 6" 8"

Part No. Description RETAIL SS 39188 3/8” HB x 1/4” FPT Stainless Check Valve $ 28.14 SS 39188-8400-540SS 1/2” HB x 1/4” FPT Stainless Check Valve 30.82

PVC Union Check Valves

Part No.

These valves are designed specifically for municipal and industrial pumping applications where heavy duty, extremely reliable valves are needed. Connections are ANSI 125 flanges. Bodies are epoxy coated, cast iron. Strainer basket is 304SS. (Sizes up to 24” are available).

* Flomatic Brand

DULTMEIER SALES • OMAHA, NE

RETAIL

GF P562-12 1/2" $ 137.02 GF P562-34 3/4" 147.07 GF P562-1 1" 163.15 GF P562-114 1-1/4" 192.63 GF P562-112 1-1/2" 221.10 GF P562-2 2" 317.58

No. 562

FPT Ends D

Viton® is a registered trademark of DuPont Performance Elastomers

(800) 228-9666

•

www.dultmeier.com

• DAVENPORT, IA

(800) 553-6975

E0806

Solenoid Valves

Solenoid Valves — Normally Closed —

Kingston Solenoid Valves are designed for use in difficult applications. Dirty Water Filter System is an ideal choice for Reclaim Water in industrial, car wash, truck wash and irrigation applications. Internally piloted, twopiece diaphragm is EPDM formulated for resistance to chlorine, chloramine and other chemical solutions. Unique design also reduces damaging vibrations from water hammer. Valve and copper line relieve solutions on top of diaphragm back into flow line when required.

Bypass is for manual flush or manual actuation

Brass construction. Rated from 20 to 150 PSI and -20° to +200° F. Available in 3/4” to 3” FPT sizes and 24 or 110 volt. D

FEATURES •

Dirty Water Filter System & (2) Piece Diaphragm Assembly

•

Produces Exceptional Flow Rated Performance

•

Stops Water Hammer in Its Tracks

FPT Maximum Size Volts GPM Wt.

Part No.

KG KN1075075 KG KN1075100 KG KN1075125 KG KN1075150 KG KN1075200 KG KN1075300 KG KN1000075 KG KN1000100 KG KN1000125 KG KN1000150 KG KN1000200 KG KN1000300

3/4" 1” 1-1/4” 1-1/2” 2” 3” 3/4” 1” 1-1/4” 1-1/2” 2” 3”

110 110 110 110 110 110 24 24 24 24 24 24

15 30 60 90 160 260 15 30 60 90 160 260

2.35 lbs. 3.75 lbs. 5.00 lbs. 8.50 lbs. 9.50 lbs. 30.0 lbs. 2.35 lbs. 3.75 lbs. 5.00 lbs. 8.50 lbs. 9.50 lbs. 30.0 lbs.

RETAIL

$ 213.06 249.24 286.76 183.25 397.98 1771.48 159.13 219.76 251.92 203.68 356.44 1444.52

Operating Ranges: Flow: 5 to 260 GPM Pressure: 20 to 150 PSI Temperature: -20° to +200° F.

3-Way Solenoids 1/8” or 1/4” FPT • Stainless Steel Body • 3-Way Direct Acting • Universal Direct Acting, 3-Way Solenoid Valves are available in 1/8” and 1/4” FPT ports. Stainless steel bodies with Viton® seals. Universal design can be used for Normally Open, Normally Closed or Diverting applications. Rated for air, oil or water solutions to 150 PSI. Ambient temperatures to 125° F. and fluid temperatures to 230° F. 110 volt and 24 volt conduit coil housings with 24” lead wires are standard but junction box, DIN, explosion-proof, 12 volt and 240 volt options are also available. Valves can be mounted in any position.

Part No.

Valve Type

GC S306-12A1 GC S306-22A1 GC S306-13B1 GC S306-23B1

3-Way Stainless 3-Way Stainless 3-Way Stainless 3-Way Stainless

DULTMEIER SALES • OMAHA, NE

FPT AC Ports Volts RETAIL

1/8” 1/8” 1/4” 1/4”

24 Volt 110 Volt 24 Volt 110 Volt

(800) 228-9666

•

$ 117.25 114.57 127.97 117.25

www.dultmeier.com

Viton® is a registered trademark of DuPont Performance Elastomers

• DAVENPORT, IA

(800) 553-6975

E1029

Solenoid Valves

Solenoid/Strainer Valves

High Pressure Normally Closed

Diaphragm Operated Solenoid/Strainer Combo Units. 442P & 443P are brass construction. P442 & P443 are celcon plastic construction. Used for controlling the flow of water, air, oil and various other (except hazardous) chemicals. Features: Temperatures to 200° F. maximum • Standard with molded waterproof coil • Mount in any position except with the coil under the valve • Electrical junction box • Stainless steel seat • EPDM seal • Pilot operation which are direct acting • Pressures to 125 PSI.

P443 Celcon Body D

442P Brass Body

Part No. DE 442P-24 DE 442P-110 DE 443P-24 DE 443P-110 DE P442-24 DE P442-110 DE P443-24 DE P443-110 DE 4195-24 DE 4195-120V

Pressure AC FPT Flow @ Differential PSI Body Volts Ports 60 PSI Max. Min. Brass 24 1/4" 7.75 GPM 125 3 Brass 110 1/4" 7.75 GPM 125 3 Brass 24 3/8" 7.75 GPM 125 3 Brass 110 3/8" 7.75 GPM 125 3 Celcon 24 1/4" 7.75 GPM 125 3 Celcon 110 1/4" 7.75 GPM 125 3 Celcon 24 3/8" 7.75 GPM 125 3 Celcon 110 3/8" 7.75 GPM 125 3 24-Volt Replacement Coil ONLY............................. 110-Volt Replacement Coil ONLY...........................

RETAIL $ 42.55 42.55 42.55 42.55 32.43 32.70 32.70 32.70 11.12 11.12

Part No.

DE 481P-12 DE 481P-110 DE 481P-24 DE 482-2-12 DE 482-2-120 DE 482-2-24 DE 4191-24V DE 4191-120V

Volts

Flow @ 60 PSI

12 Volt DC 110 Volt AC 24 Volt AC 12 Volt DC 110 Volt AC 24 Volt AC

Part No. Ports AC-Volts DE 424-2-12 1/4" FPT 12 DE 424-2-24 1/4" FPT 24 DE 424-2-110 1/4" FPT 110

IND

25.73 25.73

Flow@60 PSI RETAIL 2.3 GPM $ 65.66 2.3 GPM 61.31 2.3 GPM 60.97

DULTMEIER SALES • OMAHA, NE

(800) 228-9666

Part No. DE 463PS-24 DE 464PS-24 DE 476PS-24 DE 478PS-24 DE 463PS-110 DE 464PS-110 DE 476PS-110 DE 478PS-110

476PS & 478PS

Pressure FPT Flow Differential PSI Ports Volts @ 60 PSI Min. Max. 3/8” 24 15 GPM 0 150 1/2” 24 15 GPM 0 150 3/4” 24 38 GPM 0 150 1” 24 100 GPM 0 150 3/8” 110 15 GPM 0 150 1/2” 110 15 GPM 0 150 3/4” 110 38 GPM 0 150 1” 110 100 GPM 0 150

Junction Box Coils

Solenoid Coils

RETAIL $ 74.37 75.04 229.14 229.14 77.72 77.72 229.14 229.14

Spade Coils

Din Coils

Part No. Volts Type For Dema Valves RETAIL DE 4191-12V 12VDC Junction Box 401 / 424 / 481 / 482 / 473 / 474 / 476P $ 29.48 DE 4191-120V 120VAC Junction Box 401 / 424 / 481 / 482 / 473 / 474 / 476P 25.73 DE 4191-24V 24VAC Junction Box 401 / 424 / 481 / 482 / 473 / 474 / 476P 25.73 DE 4191-24VDC 24VDC Junction Box 401 / 424 / 481 / 482 / 473 / 474 / 476P 29.48 DE 4191-240V 240VAC Junction Box 401 / 424 / 481 / 482 / 473 / 474 / 476P 25.73 DE 4191D-120 120VAC Din 401 / 424 / 481 / 482 / 473 / 474 / 476P 29.35 DE 4191D-24 24VAC Din 401 / 424 / 481 / 482 / 473 / 474 / 476P 29.35 DE 4192-12V 12VDC Junction Box 412 / 413 / 414 / 416 / 418/ 453 / 454 / 458 33.84 DE 4192-120V 120VAC Junction Box 412 / 413 / 414 / 416 / 418/ 453 / 454 / 458 30.15 DE 4192-24V 24VAC Junction Box 412 / 413 / 414 / 416 / 418/ 453 / 454 / 458 30.15 DE 4192-24VDC 24VDC Junction Box 412 / 413 / 414 / 416 / 418/ 453 / 454 / 458 33.84 DE 4192-240V 240VAC Junction Box 412 / 413 / 414 / 416 / 418/ 453 / 454 / 458 30.15 DE 4192D-120 120VAC Din 412 / 413 / 414 / 416 / 418/ 453 / 454 / 458 31.62 DE 4192D-24 24VAC Din 412 / 413 / 414 / 416 / 418/ 453 / 454 / 458 31.62 DE 4192D-24VDC 24VDC Din 412 / 413 / 414 / 416 / 418/ 453 / 454 / 458 39.20 DE 4195-12 12VDC Spade Coil 442 / 443 / 462 / 463 / 464 13.40 DE 4195-120V 120VAC Spade Coil 442 / 443 / 462 / 463 / 464 11.12 DE 4195-220 240VAC Spade Coil 442 / 443 / 462 / 463 / 464 11.12 DE 4195-24 24VAC Spade Coil 442 / 443 / 462 / 463 / 464 11.12 DE 4195-24DC 24VDC Spade Coil 442 / 443 / 462 / 463 / 464 13.00 DE 41-9-7-6 120VAC Spade Coil 491 / 492 / 476PS / 478PS 12.06 DE 41-9-7-3 24VAC Spade Coil 491 / 492 / 476PS / 478PS 12.06 DE 04192-120V * 120VAC Junction Box O412 / O414 / O416 / O418 / O453 / O454 30.15 DE 04192-24V * 24VAC Junction Box O412 / O414 / O416 / O418 / O453 / O454 30.15 * 0 Prefix signifies Normally Open Coils. Note: Junction Box Coils rated Nema 1. Din & Conduit Coils rated Nema 4.

Stainless Steel Normally Closed 424P Series. This normally closed direct acting, Stainless body Solenoid Valve may be used directly in chemical lines. • Excellent corrosion resistance • Pressure differential range - 0 to 150 PSI • Maximum working pressure is 150 PSI • Temperatures to 200° F. • EPDM Seal.

Diaphragm Operated, Stainless Steel Solenoids from Dema. Normally-Closed valves feature corrosion-resistant, stainless steel bodies. 24-Volt Models feature spade style coils. 110-Volt models have coils with 12” lead wires. Sizes from 3/8” to 1” FPT ports offer a wide range of flow rates. Maximum operating pressure is 400 PSI. Buna diaphragms are standard on 476/478, EPDM on 463/464. 12 Volt and 240 coils are also available.

463PS/464PS

RETAIL

2.1 GPM $ 99.16 2.1 GPM 97.15 2.1 GPM 97.15 2.1 GPM 104.52 2.1 GPM 99.83 2.1 GPM 100.50

24-Volt Replacement Coil ONLY...... 110-Volt Replacement Coil ONLY....

450 Series High Pressure: These piston 453P style solenoid valves have a maximum D working pressure of 1500 PSI. Minimum pressure differential 10 PSI, Maximum pressure differential 1200 PSI. Brass body construction. Standard with molded waterproof coil and electrical junction box. Valves are rated for 200° F. fluid and 120° F. ambient temperatures. Valves can be mounted in any position. Buna seal. Not for use with Hazardous or Corrosive fluids. FPT Part No. AC-Volts Ports FLOW @ 60 PSI RETAIL DE 453P-24 24 3/8" 14-GPM $ 107.87 DE 453P-110 110 3/8" 14-GPM 107.87 DE 453PS-110 * 110 3/8" 14-GPM 121.27 DE 453PS-24 * 24 3/8" 14-GPM 121.27 DE 454P-24 24 1/2" 29-GPM 163.48 DE 454P-110 110 1/2" 29-GPM 163.48 DE 458P-24 24 1" 86-GPM 281.40 DE 458P-110 110 1" 86-GPM 280.06 DE 458PS-110 * 110 1" 86-GPM 302.84 DE 458PS-24 * 24 1" 86-GPM 302.84 58.29 DE RK453 Repair Kit for 453 Series ............................................. DE RK454 Repair Kit for 454 Series ............................................. 44.89 DE RK458 Repair Kit for 458 Series ............................................. 79.73

Stainless Steel Solenoids

DEMA 481/482 Series Solenoids for vacuum applications, such as inlet side of pump. Rated to 200° F. Valve bodies are PVC with EPDM seal. Available in 1/8" and 1/4” FPT ports and in 12, 24 or 110 volt. 482 Models have adjustable flow screws.

481P

454P

* With stainless steel piston. Used on many OEM applications.

Vacuum Solenoids

24 & 110 Volt

•

www.dultmeier.com

• DAVENPORT, IA

(800) 553-6975

E0377

Solenoid Valves Any solenoid less coil, Call for Deduction.

400 Series Brass Bodies Medium Pressure 12, 24 & 110-Volt Normally Closed & Normally Open

Used for controlling the flow of water, air, oil and various other (except hazardous) chemicals. Features: Temperatures to 200° F. maximum • Standard with molded waterproof coil • Mount in any position except with the coil under the valve • Electrical junction box (except on model 491P) • Pilot operation (except on 401P which is direct acting) & (473P, 474P & 476P which are BUNA diaphragm operated). • Teflon seal on A400 Series.

MODEL

WATER FLOW -GAL./MIN.

400 Series Valves *For pressure differential below 3-PSI remove closing spring.

PRESSURE DIFFERENTIAL - PSI

NO. 1 2 5 10 20 50 401P 0.27 0.38 0.60 0.85 1.2 1.9 O412P 1.2 1.7 2.7 3.8 5.4 8.5 A413P* 2.0 2.8 4.5 6.3 8.9 14 A414P* 3.1 4.4 6.9 9.8 14 22 OA414P 3.1 4.4 6.9 9.8 14 22 A416P* 5.3 7.5 12 17 24 37 OA416P 5.3 7.5 12 17 24 37 A418P 8.0 11.0 18 25 36 58 424P-2 0.30 0.42 0.67 0.95 1.34 2.12 491P 0.20 0.28 0.44 0.63 0.89 1.4

RETAIL $ 57.29 56.62 80.40 80.40 89.11 89.11 122.61 121.94 167.50 167.50 98.49 98.49 98.49 98.49 97.15 102.51 105.86 105.86 109.88 9.25 18.76 18.09 25.73 36.52

General Purpose Solenoid Valves for on-off control of water, chemicals, air, oil, and gas. Available with brass or stainless steel bodies. Standard with Buna-N seals, (EPR,Viton® and other sealing materials also available).Exclusive stainless steel seat insert reduces wear and delivers longer life in brass bodied valves. These solenoid valves are all rated from 0 to 5 PSI as high as 200 psi operating pressure differential which allows them to be used in a wide variety of applications.Operational design is Piloted Diaphragm.Available in either normally closed or normally open options. All valves are standard with 24" lead wires.

S20 Series Solenoid Valves: • • • • •

2-Way Operation Piloted Diaphragm Design Normally Closed & Normally Open (3/8” - 2”) D Zero to 200 psi OPD. Rated to 180° F. FPT AC * Max O.P.D

GC S202-24 Brass Norm Open 3/8" GC S202-10 Brass Norm Open 3/8" GC S204-24 Brass Norm Open 1/2" GC S204-10 Brass Norm Open 1/2" * Maximum Operating Pressure Differential.

24 110 24 110

0 0 0 0

200 200 200 200

146.06 144.72 148.74 146.06

S30 Series Solenoid Valves: • • • •

(1/4”) D

2-Way, Zero Differential Direct Acting Operation Brass or Stainless Bodies Buna Seal

FPT AC * Max O.P.D Part No. Valve Type Ports Volts Min Max GC S301B-24 Norm Closed, Brass 1/4" 24 0 150 GC S301B-10 Norm Closed, Brass 1/4" 110 0 150 GC S303S-24 Norm Closed, SS 1/4" 24 0 150 GC S303S-10 Norm Closed, SS 1/4" 110 0 150 GC CS4-110 Replacement Coil, 110 Volt ....................................... GC CS4-24 Replacement Coil, 24 Volt ......................................... * Maximum Operating Pressure Differential.

Normally OPEN Valves Maximum

Pressure FPT Flow Working Differential PSI Part No. Volts Ports @ 60 PSI Pressure Max. Min. DE O443P-24 24 3/8” 8 GPM 125 PSI 3 1 DE O443P-110 110 3/8” 8 GPM 125 PSI 3 1 DE O473P-24 24 3/8” 27 GPM 300 PSI 150 1 DE O473P-110 110 3/8” 27 GPM 300 PSI 150 1 DE O474P-24 24 1/2” 31 GPM 300 PSI 150 1 DE O474P-110 110 1/2” 31 GPM 300 PSI 150 1 DE O476P-24 24 3/4” 39 GPM 300 PSI 150 1 DE O476P-110 110 3/4” 39 GPM 300 PSI 150 1 DE O453P-24 24 3/8” 14 GPM 1000 PSI 1000 10 DE O453P-110 110 3/8” 14 GPM 1000 PSI 1000 10 DE 04191-24V 24 Volt Replacement Coil for 0453P-24 Valve.......... DE 04191-120V 110 Volt Replacement Coil for 0453P-110 Valve...... DE 04192-24V 24 Volt Replacement Coil for 0473P-24, 0474P-24 & 0476P-24 Valves................ DE 04192-120V 110 Volt Replacement Coil for 0473P-110, 0474P-110 & 0476P-110 Valves..........

ITT-General Control Solenoids

Part No. Material Valve Type Ports Volts Min. Max. RETAIL GC S201-24 Brass Norm Closed 3/8" 24 0 140 $ 107.20 GC S201-10 Brass Norm Closed 3/8" 110 0 140 106.53 GC S203-24 Brass Norm Closed 1/2" 24 0 140 108.54 GC S203-10 Brass Norm Closed 1/2" 110 0 140 108.54 GC S207-24 Brass Norm Closed 3/4" 24 5 150 125.96 GC S207-10 Brass Norm Closed 3/4" 110 5 150 125.96 GC S210-24 Brass Norm Closed 1" 24 5 150 191.62 GC S210-10 Brass Norm Closed 1" 110 5 150 191.62 GC S211-24 Stainless Norm Closed 3/4” 24 0 150 172.86 GC S211-10 Stainless Norm Closed 3/4” 110 0 150 174.20 GC S212-24 Stainless Norm Closed 1” 24 5 150 234.50 GC S212-10 Stainless Norm Closed 1” 110 5 150 234.50 GC S230-24 Brass Norm Closed 1-1/4" 24 5 150 377.88 GC S230-10 Brass Norm Closed 1-1/4" 110 5 150 364.48 GC S250-24 Brass Norm Closed 1-1/2" 24 5 150 387.26 GC S250-10 Brass Norm Closed 1-1/2" 110 5 150 396.64 GC S270-10 Brass Norm Closed 2" 110 5 150 560.12 GC S270-24 Brass Norm Closed 2" 24 5 150 546.72 GC CS3-110 Replacement Coil, 110 Volt ..................................... 25.06 GC CS3-24 Replacement Coil, 24 Volt ....................................... 24.92 GC CS4-110 Replacement Coil, 110 Volt ..................................... 34.17 GC CS4-24 Replacement Coil, 24 Volt ....................................... 34.17 * Maximum Operating Pressure Differential.

Normally CLOSED Valves Maximum

Pressure FPT Flow Working Differential PSI Part No. Volts Ports @ 60 PSI Pressure Max. Min. DE 401P-24 24 1/4" 2 GPM 150 PSI 150 0 DE 401P-110 110 1/4" 2 GPM 150 PSI 150 0 DE A413P-24 24 3/8" 15 GPM 400 PSI 150 3 DE A413P-110 110 3/8" 15 GPM 400 PSI 150 3 DE A414P-24 24 1/2" 24 GPM 400 PSI 150 3 DE A414P-110 110 1/2" 24 GPM 400 PSI 150 3 DE A416P-24 24 3/4" 39 GPM 400 PSI 150 3 DE A416P-110 110 3/4" 39 GPM 400 PSI 150 3 DE A418P-24 24 1" 62 GPM 400 PSI 150 3 DE A418P-110 110 1" 62 GPM 400 PSI 150 3 DE 473P-24 24 3/8" 27 GPM 300 PSI 150 1 DE 473P-110 110 3/8" 27 GPM 300 PSI 150 1 DE 474P-24 24 1/2" 31 GPM 300 PSI 150 1 DE 474P-110 110 1/2" 31 GPM 300 PSI 150 1 DE 474PT-110 * 110 1/2" 31 GPM 300 PSI 150 1 DE 474PT-12 * 12 1/2" 31 GPM 300 PSI 150 1 DE 476P-24 24 3/4" 39 GPM 300 PSI 150 1 DE 476P-110 110 3/4" 39 GPM 300 PSI 150 1 DE 476PT-12 * 12 3/4" 39 GPM 300 PSI 150 1 DE RK401 Repair Kit, 401 Valves........................................ DE RK413 Repair Kit, 413 Valves........................................ DE RK414V Repair Kit, 414 Valves........................................ DE RK416V Repair Kit, 416 Valves........................................ DE RK418 Repair Kit, 418 Valves........................................ * Teflon Fitted

• • • • • • • •

RETAIL $ 95.81 95.81 136.68 136.68 136.68 136.68 146.06 146.06 151.42 150.08 23.58 23.58

2-Way High Pressure Piloted Piston Operation Stainless Bodies Teflon Seats 24 or 110 Volt Normally Closed Conduit Coils

Part No. GC S401-24 GC S401-10 GC S408-24 GC S408-10 GC H901-24 GC H901-10 GC H902-24 GC H902-10

30.15 30.15

RETAIL $ 71.69 73.70 73.03 75.71 34.17 34.17

High Pressure 40 Series Solenoid Valves:

Valve Type Norm Closed, SS Norm Closed, SS Norm Closed, SS Norm Closed, SS Norm Closed, SS Norm Closed, SS Norm Closed, SS Norm Closed, SS

15-1200 PSI ODP (3/8” to 1”) FPT AC Ports Volts 3/8" 24 3/8" 110 1/2" 24 1/2" 110 3/4” 24 3/4” 110 1” 24 1” 110

Flow @ 60 PSI 14 GPM 14 GPM 32 GPM 32 GPM 54 GPM 54 GPM 85 GPM 85 GPM

RETAIL $ 131.32 128.64 146.06 146.06 309.54 353.76 357.78 383.24

Viton® is a registered trademark of DuPont Performance Elastomers

IND

DULTMEIER SALES • OMAHA, NE

(800) 228-9666

•

www.dultmeier.com

• DAVENPORT, IA

(800) 553-6975

E0379

Float/Mixing Valves

Hydrominder Mix Valves A HydroMinder keeps any reservoir ready with accurately mixed solution at all times. No pouring, no stirring, no waiting, no downtime. At the moment the solution level drops in the reservoir, the float ball activates a nonelectric magnetic valve. The flow of tap water through the HydroMinder siphons liquid chemical concentrate through a metering tip and automatically maintains the level of ready-to-use solution. Unit is self-contained and self-controlled. Operates using tap water only and easily installs directly on the reservoir. Made For Jobs That Require a Constant Supply of Chemical Solution

• • • • • • • • •

Automatic Car and Truck Washing Conveyor lubrication High Pressure Cleaning Machine Tool Cooling Systems for Central Cleaning Water Treatment Spraying Systems Metal Finishing Steam Cleaning

A series of eight, uniquely designed, color-coded metering tips offer a wide range of accurate water-to-product concentration ratios.

Water Valves Ideal for Use In Car/Truck Wash Holding Tanks, Fountains, Livestock Tanks and Many More. Hudson Water Valves will solve your fluid control problems once and for all. Unique design uses fluid pressure as opposed to lever arms or float balls. Features: Valve body is made of durable, glass-filled nylon • Internal parts are stainless, silicone and plastic for rust-free performance • Meets antisiphon requirement when properly installed • No levers, arms or external moving parts • Rated to 150° F. as shown • 1/2” Valves are rated to 100 PSI • 1” Valves are rated to 80 PSI.

Valves & Adapters are Optional

5037K Eductor

5043A Float

The Hydro-Minder may be easily installed on any liquid reservoir.

GPM Siphon Mounting Part No. @40 PSI Breaker Bracket Inlet Dilution RETAIL HR 515 1.5 Yes Yes 3/8” FPT 1:1 to 100:1 $ 274.70 HR 506 4.5 No Yes 3/8" FPT 4:1 to 240:1 146.06 HR 507 4.5 No No 3/8" FPT 4:1 to 240:1 139.36 HR 511 4.5 Yes Yes 3/8" FPT 4:1 to 240:1 176.88 HR 5111 5.6 Yes Yes 3/8” FPT 4:1 to 240:1 218.42 HR 532 6 * Yes Yes 3/8” FPT 3:1 to 195:1 414.06 HR 525 9 No Yes 3/4" GHT 4:1 to 530:1 286.76 HR 530 9 Yes Yes 3/4" GHT 4:1 to 530:1 389.94 HR 561 18 No Yes 3/4" GHT 7:1 to 1200:1 511.88 HR 562 18 Yes Yes 3/4" GHT 7:1 to 1200:1 560.12 HR 563 25 Yes Yes 1" FPT 8:1 to 1200:1 495.80 HR 564 25 No Yes 1" FPT 8:1 to 1025:1 434.16 HR 6655K Repair Kit for 506 & 511 Valves............................. 32.83 HR 5037K Chemical Eductor, 506/511 Valves........................ 22.65 HR 151 Dual Chemical Kit for 506 or 511 valves................ 134.00 AB M75-3/4X3/8 Adapter, 3/8" MPT x 3/4" FGHT............................. 4.45 SM 3306-304 3/8" Ball Valve........................................................ 12.26 SM 3306-305 3/4” Ball Valve........................................................ 22.78 HR 690014 Push In Tip Kit........................................................ 18.09 HR 690015 Screw In Tip Kit...................................................... 17.55 * (2) Independent Eductors to Meter - (2) Chemicals at Different Ratios.

RETAIL

HD V1200HT HD V1000HT

$ 37.79 37.79

1/2” 1”

20 GPM 62 GPM

Assemblies D

Maximum Maximum Part No. MPT Ports Pressure Flow RB R400-1/2-3 1/2" 125 PSI 36 GPM RB R400-3/4-3 3/4" 100 PSI 50 GPM RB R400-1-3 1" 100 PSI 70 GPM RB R380 10" Stem & Swivel Assembly, 1/4-20

Outlet

WMC12

Engineered to automatically open when water temperatures drops below 42° F. When Ice Bull sensor valve opens, .20 GPM of warmer supply water bypasses the float valve and flows into the tank through the discharge hose. When tank water temperature rises, the thermo valve shuts. Kit includes 3/4” brass water level float valve that operates independently from the thermo valve for maintaining water level in tank.

R380 brass rod and swivel allows float balls to move in tank to help prevent damage from nuzzling. RB R418-34IB RB R380 RB PF5 RB R440-5 RB R1340-5

Now a float valve designed for the rigors of Car and Truck washing. Exclusive design features two interacting valves. “Lo Valve” kicks in first when a small amount of water is needed. When valve completely opens the “Main Valve” is activated.This design saves years of wear life. Valves are available in three sizes to handle a wide variety of flow requirements. Rated to 120° F. Construction: Brass head, neoprene diaphragm and steel seat are corrosion-resistant and virtually maintenancefree. Complete with 6” float rod and plastic float that is 3-1/2” long x 1-3/4” diameter.

(800) 228-9666

Part No.

Inlet Port Outlet Port Flow @ 40 PSI RETAIL

WQ WMC12 1/2" MPT 1/2" MPT 9 GPM $ 60.43 WQ WMC34 3/4" MPT 1/2' MPT 12 GPM 60.97 WQ WM1H 1" MPT 3/4" MPT 58 GPM 98.49 WQ WM004S Diaphragm for 1/2” & 3/4” Valves......... 12.26 WQ WMS0041 Diaphragm for 1” Valves ...................... 19.30 WQ RM150 Replacement Valve.............................. 25.93

RETAIL

Ice Bull Kit with Float Assembly.......... $ 195.31 10” Stem & Swivel Assembly............... 21.17 5” Poly Float Ball................................. 15.54 5” Copper Float Ball............................ 42.48 5” Stainless Float Ball.......................... 71.02

DULTMEIER SALES • OMAHA, NE

RETAIL $ 85.09 110.55 126.63 21.17

Water Master Float Valves

RM150

Inlet

Ice Bull Automatic Ice Prevention System is built to stand up to the harsh temperatures and physical punishment of livestock watering during winter. Thermoactivated water station delivers low maintenance durability you can count on.

Description

150° F. 150° F.

Automatic Livestock Watering Package Assemblies consist of valve, stem, swivel and float ball. Unique stem and swivel design allows ball to move and prevents damage from livestock nuzzling. Available with either 1/2", 3/4" or 1" valves.

R400

Rated to 100 PSI. Brass construction with buna seals. Kit includes 3/4” float valve, Ice Bull thermo valve and discharge hose with fittings. (Note: Float rods and floats are not included as many option exist).

Part No.

1” Valve

Maximum Part No. Inlet Flow @ 40 PSI Temperature

Thermo Sensor

1/2” Valve

Livestock Watering Assemblies

Float Tank Ice Prevention D

•

www.dultmeier.com

• DAVENPORT, IA

(800) 553-6975

E0389

Float Valves

Brass and Stainless Float Valves from Robert Manufacturing. Ideal for control of water supply in industrial and agricultural applications. Positive acting valves feature Buna or Viton® discs and cups as noted. Buna seals are rated to 180° F. Viton® seals are rated to 450° F. Poly floats are rated to 210° F. All valves come with thumb screw and short arm but do not include float ball or float rod which must be ordered separately. Float ball size must be matched to valve size for correct operation. All valves are easily repaired and kits are shown in the charts below. Seal Cup

Special Rotating Plunger Minimizes Disc Wear Single Lever Action

Disc

Also with Compound Lever Action

Precision Machined Red Brass Casting Serrated Short Arm & Thumb Screw for Accurate Water Control

BOB Brass Float Valves

BOB Stainless Float Valves

Brass Valves Feature Heavy-Duty, Machined Red Brass Construction R400 Series Brass Valves feature MPT inlet x MPT outlet. Designed for use with R450 float rods. Buna seals are standard Rated to 125 PSI on 1/2” and 100 PSI on 1”. RC800 CASA Series Brass Valves have MPT inlet x open flow discharge. This series is designed to open and close slower than the 400 Series which reduces water hammer issues. Float rates are also higher. Designed for R450 float rods. Viton® seals are standard. Rated to 120 PSI on 1/2” and 100 PSI on 3/4” and 1”. R600 Series Brass Valves have 1-1/2” FPT inlet and outlet ports. Designed for R450 float rods and PF8-1 poly float. R440-8 copper float can be used if R434-0 adapter is also ordered. Buna seals are standard. Rated to 125 PSI. R610 Brass Valve is 2” FPT inlet x open flow. Special design can only be used with the 455-12 float rod and PF8 or R440-8 copper float ball and R209-3/8x1/8 adapter. Buna seals are standard Rated to 115 PSI.

Stainless Float Valves are AISI 316SS construction and are NSF rated for food and sanitary applications. These valves can also be used with D-Ionized, Ultra-Pure or Reverse Osmosis water as well as a wide variety of other applications. Viton® seals are standard and are rated to 450° F. R1350 & R1360 Series stainless valves have MPT or FPT inlet x FPT outlet as noted. Designed for use with R1310 float rods. Viton® seals are standard. Rated to 85 PSI. R1370 Stainless Valve is 1” FPT inlet x 3/4” FPT outlet. Designed for use with R1310 float rods. Viton® seals are standard. Rated to 85 PSI. R1380 Stainless Valves are 1-1/2” or 2” FPT inlet x FPT outlet. Designed for use with R1315 float rods and 8” stainless float ball. Viton® seals are standard. Rated to 100 PSI.

D D

R400 Float Valves (MPT Discharge)

R600 (FPT Discharge)

Brass Valves

Part No. RB R400-1/2 RB R400-3/4 RB R400-1 RB RC810-1/2 RB RC810-3/4 RB R810-1 RB R600-1-1/2 RB R610-2

Inlet 1/2" MPT 3/4” MPT 1” MPT 1/2” MPT 3/4” MPT 1” MPT 1-1/2” FPT 2” FPT

Outlet 1/2" MPT 3/4” MPT 1” MPT Open Open Open 1-1/2” FPT Open

R/RC Series (Open Discharge)

Flow Minimum @ 35 PSI Float Size 12 GPM 4” 21 GPM 5” 43 GPM 6” 14 GPM 4” 27 GPM 5” 80 GPM 6” 82 GPM 8” 112 GPM 8”

R1350

RETAIL $ 31.62 38.73 60.30 39.80 48.51 75.71 145.73 152.43

R1380

D D

Brass Valve Accessories

R1340 Part No. Description RETAIL Float RB R450-6 6” Brass Float Rod for R400/R600/R800.............. $ 8.64 RB R450-8 8” Brass Float Rod for R400/R600/R800.............. 6.19 RB R450-10 10” Brass Float Rod for R400/R600/R800............ 7.57 Stainless Valves Flow Minimum RB R455-12 12” Brass Float Rod for R610-2............................ 17.15 Part No. Inlet Outlet @ 35 PSI Float Size RETAIL RB PF21-1 4” Poly Float for 1/2” Valves.................................. 4.45 RB R1350-1/2 1/2" FPT 1/2" FPT 37 GPM 4” $ 777.20 GN 2P009 4” Copper Float for 1/2” Valves............................. 33.10 RB R1350-3/4 3/4” FPT 3/4” FPT 37 GPM 5” 789.26 RB PF5 5” Poly Float for 3/4” Valves.................................. 15.54 RB R1360-3/4 3/4” MPT 3/4” FPT 37 GPM 5” 789.26 RB R440-5 5” Copper Float for 3/4” Valves............................. 42.48 RB R1370-1 1” FPT 3/4” FPT 52 GPM 6” 833.48 RB PF6 6” Poly Float for 1” Valves..................................... 18.22 RB R1380-1-1/2 1-1/2” FPT 1-1/2” FPT 112 GPM 8” 1520.90 RB R440-6 6” Copper Float for 1” Valves................................ 55.61 RB R1380-2 2” FPT 2” FPT 112 GPM 8” 1535.64 RB PF8-1 8” Poly Float for R600-1-1/2 Valve........................ 22.51 RB PF8 * 8” Poly Float for R610-2 Valve............................ 21.17 Stainless Valve Accessories RB R440-8 * 8” Copper Float for R610-2 Valve....................... 121.94 Part No. Description RETAIL * Requires R209-3/8x1/8 Adapter for use with R455-12 Float Rod.

RB R1310-8 8” Stainless Float Rod for R1350/60 Series......... $ 20.10 RB R1310-10 10” Stainless Float Rod for R1350/60 Series....... 21.71 RB R1310-12 12” Stainless Float Rod for R1350/60 Series....... 28.68 Description RETAIL Cup & Disc Kit, R400-1/2..................................... $ 4.45 RB R1315-10 10” Stainless Float Rod for R1370/80 Series....... 45.16 Cup & Disc Kit, R400-3/4..................................... 5.52 RB R1315-12 12” Stainless Float Rod for R1370/80 Series....... 51.86 Cup & Disc Kit, R400-1........................................ 6.19 RB R1340-4 4” Stainless Float for 1/2” Valves.......................... 58.29 Cup & Disc Kit, RC810-1/2................................... 4.98 RB R1340-5 5” Stainless Float for 3/4” Valves.......................... 71.02 Cup & Disc Kit, RC810-3/4................................... 5.79 RB R1340-6 6” Stainless Float for 1” Valves............................. 87.10 Cup & Disc Kit, R810-1........................................ 3.90 RB R1340-8 * 8” Stainless Float for R1380 Series................... 188.61 Cup & Disc Kit, R600............................................ 8.24 * Requires R1315 Series Float Rods. Cup & Disc Kit, R610-2........................................ 8.64 Complete Plunger Kit, R400-1/2........................... 13.20 Complete Plunger Kit, R400-3/4........................... 17.29 Complete Plunger Kit, R400-1.............................. 31.62 Complete Plunger Kit, RC810-1/2........................ 9.58 Complete Plunger Kit, RC810-3/4........................ 12.80 “BestWay” shipping may not be the quickest option, but it will help to Complete Plunger Kit, R810-1.............................. 25.86 Complete Plunger Kit, R600-1-1/2....................... 62.98 lower your freight bill. If you select this method of shipping, Dultmeier will Complete Plunger Kit, R610-2.............................. 46.23 calculate the cheapest way to ship your package(s) at the time of shipment. Replacement Arm Kit, R400 Series..................... 15.81

Brass Valve Replacement Parts Part No. RB KB110 RB KB120 RB KB130 RB KB133 RB KB136 RB KB139 RB KB140 RB KB150 RB KB210 RB KB220 RB KB230 RB KB233 RB KB236 RB KB239 RB KB240 RB KB250 RB KB300

SHIPPING

Viton® is a registered trademark of DuPont Performance Elastomers

IND

DULTMEIER SALES • OMAHA, NE

(800) 228-9666

•

www.dultmeier.com

• DAVENPORT, IA

(800) 553-6975

E0968

Float Valves

Heavy-Duty, Corrosion-Resistant Float Valves for car wash, truck wash, livestock watering, cisterns, process applications and water storage tanks. Unique design allows for most valves to be top mounted, bottom mounted or side wall mounted. All accessories are included for rigid or flexible mounting of floats depending on valve series. Some valves have freeze prevention options for outdoor use. Simple, yet reliable mechanical design. A wide variety of styles and sizes to meet almost any water supply requirement. Slow shut-off design greatly reduces water hammer. Most valves are “Full Flow”, no restrictors.

For Rojo, Topaz, & Vortex Valves

RJ Rojo Series

MF MegaFlow Series

RJ ROJO Series low flow valves can be mounted above or below the water level. RJ15 and RJ20 valves are rated from 3-1/2 to 5 GPM. 0 to 150 PSI. RJ20HF is rated to 75 PSI. All valves in this series can be top, bottom or side mounted. Adjustable angle rod, float, wall bung adapter and flexible float line are included. Rated to 140° F.

MF MegaFlow Series high flow valves are designed for use in livestock watering troughs and are for underwater mounting only. Can be side or bottom mount. Flexible float line protects valve and float against damage. Rated to 90 GPM and up to 150 PSI. Standard with valve, float and flexible line. Temperatures to 140° F. For indoor or outdoor use.

Flow Maximum Part No. Inlet Size @ 75 PSI Temperature JO RJV15 1/2” MPT 4.2 GPM 140° F. JO RJV20 3/4” MPT 4.2 GPM 140° F. JO RJV20HF 3/4” MPT 6.8 GPM 140° F.

RETAIL $ 43.15 44.49 48.91

TP Topaz Series D

Adjustable Arm

TP Topaz Series high flow valves can be mounted above or below the water level. A good choice where higher flow rates are required. Rated up to 80 GPM. 5 to 100 PSI. All valves in this series can be top, bottom or side mounted. Adjustable angle rod, float, wall bung adapter, flexible float line and top port for freeze prevention kit are included. Rated to either 140° F. Regular Series or 176° F. Industro Series as shown. For indoor or outdoor use.

Flow Maximum Part No. Inlet Size @ 75 PSI Temperature RETAIL JO TPV20DLT 3/4” 55 GPM 140° F. $ 109.88 JO TPV1D 1” 80 GPM 140° F. 113.23 JO TPVI20 3/4” 55 GPM 176° F. 290.78 JO TPVI1 1” 80 GPM 176° F. 294.80 JO FPV Freeze Prevention Kit............................ 22.24

VX Vortex Series

Flow Maximum Part No. Inlet Size @ 65 PSI Temperature JO MFV20DLT 3/4” 55 GPM 140° F. JO MFV1D 1” 80 GPM 140° F.

Float Valves

RETAIL $ 77.72 79.73

Megaflow Series

RJ Series

Adjustable Arm

VX Vortex Series valves are designed for above water horizontal or vertical mounting. A good choice where maximum flow rates are required. Rated up to 300 GPM. 5 to 100 PSI. Adjustable angle rod, float, top port for freeze prevention kit and manual lock off switch are standard. Rated to 140° F. For indoor or outdoor use.

Vortex & Topaz Series

Flow Maximum Part No. Inlet Size @ 35 PSI Temperature RETAIL JO VXV112 1-1/2” 160 GPM 140° F. $ 372.52 JO VXV2 2” 160 GPM 140° F. 377.88 JO FPV Freeze Prevention Kit............................ 22.24

IND

DULTMEIER SALES • OMAHA, NE

(800) 228-9666

•

www.dultmeier.com

• DAVENPORT, IA

(800) 553-6975

E0975

Float Valves • Level Indicator

Jobe Differential Float Valves D

These unique valves are designed to maintain water levels in storage tanks, cisterns or irrigation applications. Eliminates constant stop/start of pumps or water systems. As tanks empty, the weighted float travels down the cord until it hits the bottom stop, the valve then opens giving in full water flow. Float rises to top stop and shuts off valve as water level rises.

Features: • Corrosion-Resistant Materials • High Flow Rates • Adjustable Stop & Start Levels • Reduces Pump Operation • Fits Almost Any Type of Tank • Rated from 15 to 150 PSI

Maximum Part No. Inlet Flow RETAIL JO TPVD20DLT 3/4” MPT 55 GPM $ 318.92 JO TPVD1DLT 1” MPT 75 GPM 322.94 JO VXVD112 1-1/2” MPT 140 GPM 361.80 JO VXVD2 2” MPT 140 GPM 407.36

Jobe Water Level Indicator Simple Float and Rod System that shows water level in enclosed or covered tanks. Highly visible indicator. Double bracing arms and mounting bracket. Stainless steel and plastic construction. Overall assembled size is 7’2” (breaks down for shipping).

Part No. RETAIL JO LIV Water Level Indicator....... $ 230.48

FPV Freeze Prevention Kit

PMV Valve Cover

PMV Valve Cover is designed for use with FPV Freeze Prevention Kit. For outdoor water applications. Mounts Rojo or Topaz Series. Valves mount to to special top port fitting on the Topaz bottom portion of cover which then attaches and Vortex Series Valves. When to tank or trough. Top portion attaches to temperatures approach freezing, cap D bottom section enclosing and protecting valve is manually turned to allow a valve from livestock. Robust and durable, low flow of water to continually pass UV protected. Dimensions are 7” wide x through the valve. Best used when 16” long x 6-3/4” high. temperatures will rise above freezing for a few hours each day. Output of up to 5 gallons per hour.

Part No. RETAIL Part No. RETAIL JO PMV Valve Cover / Protector.......... $ 92.46 JO FPV Freeze Prevention Kit............ $ 22.24

DULTMEIER SALES • OMAHA, NE

(800) 228-9666

•

www.dultmeier.com

• DAVENPORT, IA

(800) 553-6975

E1048

Pressure Relief & Unloader Valves

Hydra-Cell Bypass Relief Valves

K1, K3 & K5 Series Unloaders — Flow Sensitive —

Designed to handle the same rigorous demands as the Hydra-Cell pumps. These valves will bypass total system flow when required and will also balance system pressure for multiple gun operations.

Standard Features: Stainless Steel and Brass internal parts. • No external moving parts or springs. • Unique balance nozzle principle eliminates pressure peaks normally generated by conventionally designed unloaders as well as eliminating high pressure in all lines while unit is in by-pass mode. D • Pressure in system during unloading cycle is determined by the inlet pressure to the system. • Motors draw less amps, engines run with less load during ZK1 unloading cycle. • Piston design permits precise pressure adjustment. Ports: Inlet: 3/8" FPT, Outlet: 3/8" MPT, By-pass: 3/4" MPT on K3 and K5. Inlet: 3/8” FPT, Outlet: 1/2” MPT, By-pass: 1/2” on ZK1. Maximum temperature is 165° F. Best for Single Non Weep Guns. Maximum

Part No.

Temperature

RETAIL

IP ZK1 3600 2.3 to 10.8 165° F. IP K3.1 1500 3.0 to 4.2 165° F. IP K3.2 1500 4.3 to 5.6 165° F. IP K5.1 3000 3.0 to 4.2 165° F. IP K5.2 3000 4.3 to 6.6 165° F. IP K5.3 3000 6.6 to 10.8 165° F. IP 53129 Repair Kit for K3 Unloader................................. IP 53158 Repair Kit for K5 Unloader.................................

Maximum PSI

GPM Flow

$ 109.88 101.84 101.84 107.87 107.87 107.87 79.06 85.76

StandardvalvesfeatureBrassbodieswithBunaO-rings and stainless valve seats and plunger ball. Rated to 160° F. (200° available on special request). C62B features Viton®/Teflon o-rings and diaphragm and is rated to 200° F. D

Part No. Flow Rate Pressure Range Ports RETAIL WN C22A 3-10 GPM 500-1000 PSI 3/4" FPT $ 329.64 WN C23A 10-20 GPM 500-1000 PSI 1" FPT 456.94 WN C24A 20-40 GPM 500-1000 PSI 1-1/4" FPT 1053.24 WN C62B 1-14 GPM 500-2500 PSI 3/4" FPT 367.16 Note: Valves with other pressure ranges are available on request.

Pressure Actuated Unloader Valves Pressure Actuated Unloader Valves from Giant Industries. All valves shown feature brass housings and stainless steel wetted parts. Can be used in single or multiple gun applications. Designed to bypass at near zero pressure and operate up to the maximum pressures and flow rates shown.

INTERPUMP K7 Series Unloaders — Flow Sensitive — Standard Features: All Stainless steel and brass internal parts. No external moving parts or springs. • Unique barb and flow balancer design provides gradual pressure build-up when system is closed. • Eliminates high pressure in all lines while unit is in by-pass mode. • By-pass restrictor eliminates pressure peaks during by-pass. • Balanced piston design permits precise pressure adjustment. • Simple design offers easy maintenance and service. Ports: Inlet and by-pass ports are 3/8" FPT. Outlet port is 3/8" MPT. Maximum Temperature: 160° F. Note: These valves require a minimum of 5% by-pass at all times. Best for Single Pump or Non Weep Guns. Part No.

PSI Range

IP K7.1 IP K7.2 IP K7.3 IP 53420

Maximum Flow

Part No. GU 22911A GU 22971B GU 22083 GU 22090 GU 22912A GU 22913A GU 22973B GU 22082 GU 22095-5

RETAIL

100 to 3000 3.0 to 4.0 GPM $ 128.64 100 to 3000 4.0 to 6.6 GPM 128.64 100 to 3000 6.6 to 10.6 GPM 128.64 Repair Kit for K7 Unloader............ 122.61

MPT Max. Size Flow Mfg.

NP 9069 GU 22568 GU 22531A GU 22533A

3/8" 6 GPM Suttner 4000 $ 15.14 1/4” 10 GPM Giant 5000 11.59 3/8" 10 GPM Giant 2400 11.59 3/8" 10 GPM Giant 5000 11.59

RETAIL

Safety Pop-Off Valves

Part No.

CC 33960 CC 30961 CC 33961

Maximum Pressure Flow Adjustment Range

6-GPM 6-GPM 6-GPM

300 to 1500 PSI 1000 to 3000 PSI 1000 to 4000 PSI

YU3723 YU5221 YU2140

Part No.

D D

Ports

Max. Max. Max. GPM PSI Temp.

RETAIL

10 4000 195° F. $ 61.64 8 3200 195° F. 96.48 10 5100 195° F. 169.85 10 5100 195° F. 298.82 21 2300 200° F. 125.29 21 4000 200° F. 124.42 21 4000 195° F. 165.83 21 5800 200° F. 590.94 37 2300 195° F. 369.84 53 2200 200° F. 431.48 66 4000 195° F. 396.64 * With 5 Amp / 250 Volt MicroSwitch. ** Stainless Steel Body. † AR Brand.

RETAIL

(800) 228-9666

IP PULSAR4 3/8" FPT IP YVB8KMS * 3/8" FPT IP YU5075K 3/8" FPT IP YU5075KMS * 3/8" FPT IP YU2121 1/2" FPT IP YU2140 1/2" FPT IP YVB4021HT 1/2” FPT IP YU2158 ** 1/2" FPT IP YU3723 3/4” FPT IP YU5221 1" FPT AR VHP31 † 1” FPT

$ 47.84 42.88 46.90

DULTMEIER SALES • OMAHA, NE

PULSAR4

Viton® is a registered trademark of DuPont Performance Elastomers

IND

RETAIL $ 145.73 459.62 164.49 436.84 144.39 145.73 704.84 161.81 2058.24

YVB8KMS

Part No.

Safety Pop-Off Valves are designed to protect the pump in the event unloader or regulator valves fail. Should be used in conjunction with a regulator or unloader valve. Brass Body, hardened stainless seat and needle design eliminates weeping. Lightweight, compact design. Internal stainless steel parts provide long life. Assures complete pressure relief. Inlet port is 1/4" MPT. Outlet is 3/4" hose barb.

Spring Color Yellow Yellow White - Red Orange Orange Blue Black

High Pressure Unloader Valves

Reduce system pressure upon even a partial obstruction. Used in conjunction with an unloader valve, your pumping system actually has two safety relief valves. Brass construction. Inlet ports are 1/4" or 3/8" MPT. Valves can be reset in the field if necessary. 160° F. Maximum temperature. Outlet is 3/4" FPT. Max. PSI

Max. Max. PSI GPM Ports 1400 13 1/2” FPT 1750 35 3/4” FPT 2200 21 1/2” FPT 2200 52 1” FPT 2400 13 1/2” FPT 3000 13 1/2” FPT 4000 26 3/4” FPT 4100 21 1/2” FPT 5200 21 1/2” FPT

Pressure Sensitive Unloader Valves are designed to “trap” pressure when gun is closed and drop bypass pressure to zero. When gun is opened, immediate pressure is available. Designed for single gun applications but can be adapted for multiple guns if required. Standard with brass bodies and buna seals, except for YU2158 which has a stainless body. YVB4021HT is for single or multiple guns.

Pop-Off Relief Valves

•

www.dultmeier.com

• DAVENPORT, IA

(800) 553-6975

E0593

Unloader Valves

29 Pressure Actuated Unloader Valves

Safety Relief Valves Kingston Safety Relief Valves for air, gas and steam protection. Models shown have set pressures as noted, but pressure settings up to 250 PSI are available. KNG570 Air/Gas models feature brass/bronze construction with metal seat, rated for temperatures from -20° to +400° F. ASME section VIII, CE, CRN certified. KNG560 Steam models feature brass/bronze construction with teflon seat, rated for temperatures from -300° to +450° F. ASME 1 steam rated, CE, CRN certified. (Rated for use with some chemicals also).

Part No.

Ports

KG KNG570DD1M1K1-150 KG KNG570EE1M1K1-150 KG KNG570FF1M1K1-150 KG KNG570GG1M1K1-150 KG KNG570HH1M1K1-150 KG KNG560DD1P1A1-60 KG KNG560EE1P1A1-60 KG KNG560FF1P1A1-60 KG KNG560GG1P1A1-60 KG KNG560HH1P1A1-60

3/4” MxF 1” MxF 1-1/4” MxF 1-1/2” MxF 2” MxF 3/4” MxF 1” MxF 1-1/4” MxF 1-1/2” MxF 2” MxF

Setting

150 PSI 150 PSI 150 PSI 150 PSI 150 PSI 60 PSI 60 PSI 60 PSI 60 PSI 60 PSI

Media

RETAIL

Air/Gas $ 211.72 Air/Gas 243.88 Air/Gas 308.20 Air/Gas 365.82 Air/Gas 479.72 Steam 234.50 Steam 268.00 Steam 336.34 Steam 395.30 Steam 529.30

VRT100-330

Pressure Actuated, High-Flow Unloaders from AR Pumps. VRT Series Unloader features brass construction and stainless steel internals. Designed to bypass at near zero pressure. Ports are 3/8” FPT inlet, outlet and bypass on AL607X and VHP39. Ports are 1/2” F on VRT Series. Rated to 194° F. Part No. Max. PSI Max. GPM Spring RETAIL AR AL607X 4500 8.0 Black $ 49.71 AR VRT100-190 2800 26 Yellow 125.76 AR VRT100-330 4800 26 Blue 125.76 AR VHP39 5500 11 Black 123.28

Unloader Valves Pressure Activated D

Features: Brass Construction • Ports that are 1/2” FPT inlet x 3/8” MPT outlet • Chemical Injectors are adjustable for injection rate • Universal fit for a wide range of pumps.

ST261

ST261-S

Part No. Flow Rate Max. PSI RETAIL AR AR21039 2-3 GPM 2600 $ 95.81 AR AR21040 3-4 GPM 2600 95.81 AR AR20400 3-5 GPM 3650 112.56

Pressure Activated Unloader Valves from Suttner. Can be used for single or multiple gun applications. Flow-through design for ease of installation. Valves are shown with or without pressure switches rated to 5 amps at 120 volts or 3 amps at 250 volts. Inlet and outlet are 3/8” FPT. Bypass is 1/4” FPT. Temperatures to 175° F. All valves shown are rated to 8 GPM. Brass bodies with Viton® seals.

Unloader Control Sets for General Pumps Trapped Pressure Unloader Sets to fit General Plunger Pumps. Compact design eliminates the need for bypass hoses. Easily mounts to either side of pump manifold. Trapped pressure design with internal bypass. Built-in chemical injector with metering adjustment.Rated to 3000 PSI and 200° F. Ports are 1/2” F inlet and 3/8” M outlet. Models ZKW21, ZKW21L Model ZKW21 used on pump models: Model ZKW21L used on pump models:

2.9 - 4.5 GPM TS1371, TT1411, TT1611, TT9351 TT9441, TT9971, All EZ Pumps T811, TS1011, TS1311, TS 1331, TS1511, TS1711, TS2011, T9131, T9211

Model ZKW22L Model ZKW22L used on pump models:

4.5 - 6.0 GPM T821, T921, T1021, T1321, T1621, T9121, T9161, TS821, TS921, TS1321, TS1521, TS1621, TS2021

Part No.

Pressure Range

Switch

NP ST261 NP ST261L NP ST280 NP ST291 NP ST261-S NP ST291-S

500 - 3600 PSI 200 - 1000 PSI 500 - 4000 PSI 850 - 5070 PSI 500 - 3600 PSI 850 - 5070 PSI

No No No No Yes Yes

Pressure Sensitive

High Quality Pressure Unloader Valves. Relieves bypass pressure to zero when in bypass mode. Brass bodies are standard. Available with male or female ports for ease of plumbing.

Flow Range RETAIL 3.0 - 4.5 GPM $ 145.73 3.0 - 4.5 GPM 145.73 4.5 - 6.0 GPM 145.73

(800) 228-9666

VR54-200 FPT Ports

550S features a pressure switch rated to 15 amps and up to 250 volts.

MPT Ports

VR54-200 features 3/8” MPT inlet and outlet and 3/8” FPT bypass.

Viton® is a registered trademark of DuPont Performance Elastomers

DULTMEIER SALES • OMAHA, NE

RETAIL

$ 56.95 69.68 77.05 189.95 105.19 227.80

Unloader Valves

550 features 3/8” FPT inlet and outlet with 1/4” FPT bypass.All are rated to 194° F.

IND

ST291

One Piece Pressure Control Sets that include: Unloader Valve, Chemical Injector and Port Connections to fit many types of Plunger Pumps.

Part No. IP ZKW21 IP ZKW21L IP ZKW22L

Unloader Valve Control Sets

VRT100-190

AL607X VHP39

•

www.dultmeier.com

550S Part No. Max. PSI Max. Flow RETAIL MV VR54-200 2900 8 GPM $ 37.45 MV 550 4500 8 GPM 48.51 MV 550S * 4500 8 GPM 74.37 * Features pressure switch.

• DAVENPORT, IA

(800) 553-6975

E0594

Dry Break Couplers & Adapters

EMCO™ WHEATON Dry Break Couplers

Dixon Bayonet “Swivel” Style Dry Break Adapters/Couplers

— J72 Series —

90° Swivel Coupler

Coupler

Adapter

Only Emco Wheaton Dry-Breaks have an exclusive open/close safety feature. The valve lever won’t open (product cannot flow) until the coupler has been locked into position. The connection can’t be broken until the valve lever has been closed. It’s a fail-safe system that completely eliminates accidental spills. Lever handle on 1-1/2” & 2” couplers; knurled knob on 1” coupler. Features: Viton® Seals and gaskets are contained in a recessed cavity for positive spill-proof sealing • Spring-loaded coupling valve is self-adjusting to the adapter, so any wear between the two parts is automatically compensated. Part No. Size Body RETAIL EM J1301-001 Adapter 1" Brass $ 396.64 EM J1302-010 Adapter 2" Brass 284.08 EM J1302-022 Adapter 2" Aluminum 226.46 EM J1400-002 Coupler 1" Aluminum 1090.76 EM J1401-002 Coupler 1-1/2" Aluminum 720.92 EM J1401-010 Coupler 2" Aluminum 766.48 EM J1401-017 *Coupler 2" Aluminum/SS 986.24 EM J1405-002 90° Coupler 2" Aluminum 834.82 EM 494078 Viton® Repair Kit For J1405-002..... 235.84 EM 494076 Viton® Repair Kit For J1401 Series. 167.17 * Features Stainless Steel Trim, Recommended for Fertilizer Service

OPW Kamvalok® Dry Disconnect Camlock Couplings are the standard of the industry. The unique poppet design provides automatic closure in both the coupler & adapter to minimize spillage when disconnecting. Coupler end also includes safety shut-off valve. Camlock by FPT ends. Transport series (1712ES) includes 2” elbow swivel with FPT port. Standard with aluminum bodies, plated steel internals, aluminized zinc or plated steel trim & Viton® seals (stainless bodies & other seals available). Liquid loss is approximately one cup each end.

1700 Series Coupler

1600 Series Adapter

Note: Dry disconnects close when camlock is opened even if valve is left open.

D D

BS62-200 Coupler

BSS62-300 Coupler

Bayonet Style Part No. EV BA32-200 EV BA32-300 EV BA62-300

Adapters: Description 2” Stainless Adapter, Bayonet, Viton®........ 3” Brass Adapter, Bayonet, Viton®............. 3” Aluminum Adapter, Bayonet, Viton®......

Bayonet Style Part No. EV BS62-200 EV BSS62-200 EV BS62-300 EV BSS62-300

Couplers with Swivel: Description RETAIL 2” Aluminum Coupler, 90° Swivel, Viton®...... $ 660.62 2” Aluminum Coupler, Straight Swivel Viton® 660.62 3” Aluminum Coupler, 90° Swivel, Viton®...... 1105.50 3” Aluminum Coupler, Straight Swivel Viton® 1070.66

RETAIL $ 158.12 365.82 335.00

• Heavy Duty Stainless Crank & Link Provide Long Service Life • Both Anodized Aluminum & Stainless Couplers Include Stainless Internals • Aluminum Adapters Include Aluminum Nose Pieces & Brass Pistons • Viton® Seals are Standard (Kalrez & Chemraz Available when needed) • Pressure Ratings (at 70° F.): 1-1/2” - 210 PSI, 2” - 150 PSI, 3” - 120 PSI

DBA72-150 Adapter

DBC62-150 Coupler

Dry Break Adapters, Cam & Groove Style: Part No. Description EV DBA12-150 1-1/2” Dry Break Adapter, Aluminum.......... EV DBA72-150 1-1/2” Dry Break Adapter, Stainless........... EV DBA12-200 2” Dry Break Adapter, Aluminum................ EV DBA72-200 2” Dry Break Adapter, Stainless................. EV DBA12-300 3” Dry Break Adapter, Aluminum................

Bayonet Non-Swivel Dry Break Couplers

Bayonet Style Part No. EV BC61-200 EV BC62-200

• Dust Plugs & Caps Available

• Fully Interchangeable with OPW Kamvalok™ Couplers & Adapters • Dixon EZ Boss-Lock Cam Arms Provide High Security from Accidental Opening • Seal Cylinder Prevents Spillage When the Coupler is Disconnected from the Adapter • Dry Disconnect Couplers have Automatic Closing Poppet Assemblies • Stainless Handles for Strength & Chemical Resistance

Part No. Type Size Body RETAIL OP 1612AN-AL15 Adapter 1 1/2”.....Alum/Alum Zinc $ 219.76 OP 1612AN-AL20 Adapter 2”........Alum/Alum Zinc 226.46 OP 1612AN-AL30 Adapter 3”........Alum/Alum Zinc 391.28 OP 1712D-AL15 Coupler 1 1/2”.Alum/Plated Steel 691.44 OP 1712D-AL20 Coupler 2”.... Alum/Plated Steel 751.74 OP 1712D-AL30 Coupler 3”.... Alum/Plated Steel 1482.04 OP 1712ES-200 90 ° Swivel Cplr. 2”.... Alum/Plated Steel 936.66 OP 1612RK15 1-1/2” Adapter Repair Kit (Viton®).... 74.37 OP 1612RK20 2” Adapter Repair Kit (Viton®).......... 116.58 OP 1612RK30 3” Adapter Repair Kit (Viton®).......... 130.65 OP 1712RK15 1-1/2” Coupler Repair Kit (Viton®).... 333.66 OP 1712RK20 2” Coupler Repair Kit (Viton®).......... 333.66 OP 1712RK30 3” Coupler Repair Kit (Viton®).......... 404.68 OP 1712ERK20 2” 90 ° Coupler Repair Kit (Viton®).. 344.38 Dust caps & plugs available; replacement gaskets also available.

Same great features as Dixon Swivel Style Couplers on this page, but in a economical non-swivel style. Fully interchangeable with Emco™ Wheaton J72 Series Adapters.

• Use with Gasoline, Diesel, Motor Oil, Lube Oil, Propylene Glycol & Other Compatible Products

Dixon Bayloc™ Cam & Groove Dry Break Adapters & Couplers

1712ES-200 90° Adapter

• Built-In Swivels Provide Smooth Rotation

BA32-200 Adapter

OPW Kamvalok® Dry Break Camlock Couplings

• Lighter than Cam & Groove Dry Breaks

• Fully Interchangeable with Emco™ Wheaton J72A & J73A Series Dry Breaks • Anodized Aluminum Couplers with Viton® Seals • Stainless, Brass or Aluminum Adapters (All with SS Springs & Brass Poppets)

RETAIL $ 148.74 361.80 166.16 478.38 324.28

Dry Break Couplers, Cam & Groove Style: Part No. Description RETAIL EV DBC62-150 1-1/2” Dry Break Coupler, Aluminum............. $ 569.50 EV DBC72-150 1-1/2” Dry Break Coupler, Stainless.............. 1238.16 EV DBC62-200 2” Dry Break Coupler, Aluminum................... 637.84 EV DBC72-200 2” Dry Break Coupler, Stainless.................... 1393.60 EV DBC62-300 3” Dry Break Coupler, Aluminum................... 1278.36

Couplers with Swivel: Description RETAIL 2” Aluminum Coupler, Buna, Non-Swivel...... $ 495.80 2” Aluminum Coupler, Viton®, Non-Swivel.... 544.04

Viton® is a registered trademark of DuPont Performance Elastomers

IND

DULTMEIER SALES • OMAHA, NE

(800) 228-9666

•

www.dultmeier.com

• DAVENPORT, IA

(800) 553-6975

E0330

Backflow Prevention Valves • Vacuum Breakers

Backflow Preventer

RPZ Valves (Reduced Pressure Zone Backflow Preventers) RPZ Backflow Preventers for prevention of back siphonage and back pressure of contaminated water into safe water supplies in accordance with national plumbing codes and water utility authority requirements. Required by many states for use in fertilizer, chemical and industrial plants to protect safe water supplies from chemical contamination. Designed for high hazard cross connections in plumbing systems or for containment at the service line entrance.

SVB, Anti-Siphon, Vacuum Breaker. An ideal choice for indoor applications to prevent back-siphon of contaminated water into potable water supplies. Designed for use under constant pressure. Offers a cost effective solution to meet the requirements of ASSE 1056, CSA B64.1.3 and IAPMO.

Brass body with EPDM and stainless inner materials. Rated to 5 GPM, 180 PSI and 180° F. Ports are 1/2” FPT. Rebuildable design. Part No.

Description

HR SVB-1/2

Brass Vacuum Breaker

Wt.

RETAIL

2.1 Lbs. $ 282.74

Vacuum Breakers (For Back-Siphonage Protection) Anti-Siphon Vacuum Breakers designed to prevent back-siphonage of contaminated water into safe water supply.

No. B800: Hose Connection Vacuum Breakers. Inlet is 3/4" Female Garden Hose Thread. Outlet is 3/4" Male Garden Hose Thread. Maximum pressure is 125 PSI. Maximum temperature is 180° F. Note: For frost-free hydrants use NF8 listed below.

STANDARDS Tested and certified under the following standards: ASSE # 1013. AWWA # C506. FCCCHR of USC manual, section 10. IAPMO listed.

Series 009QT: Standard RPZ Backflow Preventer. Sizes from 3/4" through 2". Supply D pressures to 175 PSI. Water temperatures to 009QT 180° F. Features: (2) in-line, independent check valves with an intermediate relief valve • Ball type test cocks • (2) Quarter-turn, full port, resilient seated bronze ball valve shutoffs. • Modular construction • Renewable seats • Available with or without bronze strainer. S e r i e s 9 0 9 Q T: This valve incorporates the (“air-in/ water-out”) principle which substantially improves the relief valve discharge performance. (The emergency D 909QTS conditions of combined back siphonage and back pressure with both checks fouled can defeat the effectiveness of a standard RPZ backflow preventers). Note: Sizes from 3/4" through 2". Supply pressures to 175 PSI. Water temperatures to 140° F.

No. B800: Basic Vacuum Breaker. Designed to be removed and reused if required.

DULTMEIER SALES • OMAHA, NE

RETAIL $ 450.24 487.76 477.04 525.28 826.78 929.96 919.24 1074.68 1240.84 1491.42 1478.02 1747.36 2516.52 2661.24 2740.30 3311.14 56.41 124.62 170.85

(800) 228-9666

No. NF8: Especially made for wall and yard hydrants. Permits manual draining for freezing conditions. Has shearing head set screw which locks it to the hydrant to prevent tampering.

NF8

Vacuum Breakers with FPT ports for hot or cold water. For cross connections not subject to continuous pressure. Available in 1/4" through 2". Maximum temperature is 180° F. @ 125 PSI. Part No. Inlet Port Outlet Port RETAIL

WS B800 WS NF8 HR 506300 WS 288A-3/8 WS B3599 WS B3500 WS B3501

3/4" FGHT 3/4" FGHT 1/4" FPT 3/8" FPT 1/2" FPT 3/4" FPT 1" FPT

3/4" MGHT 3/4" MGHT 1/4" FPT 3/8" FPT 1/2" FPT 3/4" FPT 1" FPT

$ 12.80 73.03 58.63 126.63 54.94 66.33 94.47

Note: Not for Continuous Pressure Conditions

Hot Water Tempering Valves

70AT

Tempering Valves for Mixing Cold & Hot Water. For automatic storage water heaters these valves will increase draw capacity.Adjusting dial for “finger-tip” temperature control. Brass or bronze construction with stainless steel springs. Maximum temperature is 210° F. Maximum pressure is 150 PSI.

Temperature Part No. Connections Range

WS 70AT-1/2 1/2" FPT WS 70AT-3/4 3/4" FPT WS L70AT-1/2 1/2" FPT WS L70AT-3/4 3/4" FPT WS L1170-3/4 * 3/4” FPT/MPT WS MMV-UT * 3/4" MPT/MPT * Has Couplings for FPT Also. •

288A

Features: (2) Quarter-turn, full-port, resilient seated bronze ball valve shutoffs • Ball valve test cocks • Bronze body construction • Modular design, replaceable seats • Tight-seating rubber check valve and relief valve assemblies • Stainless steel relief valve seats, shafts and flange bolts • Available with or without bronze strainer. Part No. FPT Size Strainer Wt. WS 009QT-3/4 3/4" No 11 lbs. WS 009QTS-3/4 3/4" Yes 13 lbs. WS 009QT-1 1" No 12 lbs. WS 009QTS-1 1" Yes 15 lbs. WS 009QT-1-1/2 1-1/2" No 29 lbs. WS 009QTS-1-1/2 1-1/2" Yes 33 lbs. WS 009QT-2 2" No 33 lbs. WS 009QTS-2 2" Yes 39 lbs. WS 909QT-3/4 3/4" No 16 lbs. WS 909QTS-3/4 3/4" Yes 18 lbs. WS 909QT-1 1" No 17 lbs. WS 909QTS-1 1" Yes 20 lbs. WS 909M1QT-1-1/2 1-1/2" No 43 lbs. WS 909M1QTS1-1/2 1-1/2" Yes 45 lbs. WS 909M1QT-2 2” No 53 lbs. WS 909M1QTS-2 2" Yes 53 lbs. WS 777-1 * 1" 20 Mesh Strainer..... WS 777-1-1/2 * 1-1/2" 20 Mesh Strainer..... WS 777S-2 * 2" 20 Mesh Strainer..... *Permits interchange from QT to QTS Style.

B800

www.dultmeier.com

• DAVENPORT, IA

Shown Less Couplings

L1170-3/4 & MMV-UT RETAIL

120° - 160°F. $ 209.04 120° - 160°F. 286.76 100° - 130°F. 266.66 100° - 130°F. 301.50 90° - 160° F. 396.64 80° - 120° F. 161.81

(800) 553-6975

E0322

Polypropylene Pipe Fittings

32 Polypropylene

PIPE FITTINGS

Features: Reinforced Polypropylene • Heavy Duty (Schedule 80) • For Acid based fertilizers • Available in sizes 1/2" thru 4" • 150 PSI - W.P. at 70° F.; Maximum Temperature is 150° F.. • Excellent Chemical Resistance • FDA approved for potable water

Less 10% Discount On Std. Pkgs. While having excellent chemical resistance, Polypropylene fittings lack the strength of the Nylon (shown on adjacent pages) but are compatible with certain acids which attack Nylon. Polypropylene is the best selection for ACID based products. Part No. MPT Barb Std. Pkg. RETAIL Note: Fittings with a “TW” TW 3A1814 1/8" 1/4" 25 $ 0.80 Prefix are Hypro Brand. TW 3A1838 1/8” 3/8” 25 0.80 TK PHB1414 1/4” 1/4” 10 1.21 TK PHB1438 1/4" 3/8" 10 1.21 TK PHB1412 1/4" 1/2" 10 1.49 TW 3A3814 3/8” 1/4” 25 0.80 TK PHB3838 3/8" 3/8" 10 1.35 TK PHB3812 3/8" 1/2" 10 1.35 TW 3A3858 3/8” 5/8” 25 0.62 TW 3A1214 1/2” 1/4” 25 0.80 TK PHB1238 1/2" 3/8" 10 1.35 TK PHB1212 1/2" 1/2" 10 1.07 TW 3A1258 1/2” 5/8” 25 0.80 - Straight TK PHB1234 1/2" 3/4" 10 1.49 TW 3A3414 3/4” 1/4” 25 0.80 TK PHB3438 3/4" 3/8" 10 1.49 TK PHB3412 3/4" 1/2" 10 1.49 TK PHB3434 3/4" 3/4" 10 1.21 TK HBF075 3/4” FPT 3/4” 10 3.63 TK PHB3458 3/4" 5/8" 10 1.89 TK PHB3410 3/4" 1" 10 1.89 TK PHB1034 1" 3/4" 10 1.76 D TK PHB1010 1" 1" 10 1.49 TK HBF100 1” FPT 1” 10 2.56 TK PHB10114 1" 1-1/4" 10 2.29 TK PHB11434 1-1/4" 3/4" 10 1.89 TK PHB11410 1-1/4" 1" 10 2.29 TK PHB125 1-1/4" 1-1/4" 10 2.16 TK PHB125150 1-1/4" 1-1/2" 10 4.31 TK PHB11210 1-1/2" 1" 10 3.36 TK PHB112114 1-1/2" 1-1/4" 10 3.36 TK PHB150 1-1/2" 1-1/2" 10 3.10 TK PHB150200 1-1/2" 2" 10 5.79 TK PHB200 2" 2" 10 3.77 TK PHB200150 2" 1-1/2" 10 4.85 TK PHB300 3" 3" 10 12.26 TK PHB400 4" 4" 10 30.95 Part No. MPT Barb Std. Pkg. RETAIL TW 3EL1814 1/8” 1/4” 25 $ 1.07 TW 3EL1838 1/8” 3/8” 25 1.07 TK PEL1414 1/4” 1/4” 10 1.49 TK PEL1438 1/4" 3/8" 10 1.49 TW 3EL1412 1/4” 1/2” 25 1.07 TK PEL3838 3/8” 3/8” 10 1.49 TW 3EL3812 3/8” 1/2” 25 1.07 TK PEL1238 1/2" 3/8" 10 1.49 TK PEL1212 1/2" 1/2" 10 1.49 TW 3EL1258 1/2” 5/8” 25 1.21 TK PEL1234 1/2" 3/4" 10 1.49 D TW 3EL3414 3/4” 1/4” 25 1.26 TW 3EL3438 3/4” 3/8” 25 1.62 TK PEL3412 3/4" 1/2" 10 1.89 TW 3EL3458 3/4” 5/8” 25 1.62 TK PEL3434 3/4" 3/4" 10 1.49 TK PEL3410 3/4" 1" 10 1.89 TK PEL1034 1" 3/4" 10 2.43 TK PEL1010 1" 1" 10 2.02 TK PEL10114 1" 1-1/4" 10 2.96 TK PEL11410 1-1/4" 1" 10 2.96 Note: Fittings with a “TW” TK PEL114 1-1/4" 1-1/4" 10 2.96 Prefix are Hypro Brand. TW 3EL11434 1-1/4” 3/4” 25 5.79 TK PEL112114 1-1/2" 1-1/4" 10 8.51 TK PEL112 1-1/2" 1-1/2" 10 7.17 TK PEL200112 2" 1-1/2" 10 9.31 TK PEL200 2" 2" 10 7.71 TK PEL300 3" 3" 10 37.39 Part No. Size Std. Pkg. RETAIL TK 911-18 1/2" x 1/4” 10 $ 1.89 TK 911-20 1/2" x 3/8” 10 2.16 TK 911-21 3/4" x 1/2” 10 2.43 TK 911-19 1" x 1/2” 10 3.10 TK 911-22 1" x 3/4” 10 2.69 TK 911-225 1-1/4" x 3/4” 10 3.23 D TK 911-23 1-1/4" x 1" 10 2.89 TK 911-24 1-1/2" x 1-1/4" 10 3.23 TK 911-245 2" x 1-1/4" 10 4.31 TK 911-25 2" x 1-1/2" 10 3.36 TK 911-26 3" x 2" 10 11.86

Special Pattern Polypropylene Elbows

TK HBEL15010090 1-1/2" Hose Barb x 1" MPT Poly Elbow......... 10 22.65

Special Pattern Polypropylene Tees D

Poly Hose Barb Tee

DULTMEIER SALES • OMAHA, NE

(800) 228-9666

•

1" MPT D

Maximum Temperature is 150° F.

HBT150-100

Part No. RETAIL TK HBT025 1/4" Poly Hose Barb Tee........................................... $ 1.76 TK HBT038 3/8” Poly Hose Barb Tee........................................... 1.76 TK HBT050 1/2” Poly Hose Barb Tee........................................... 2.56 TK HBT050-038 1/2” x 1/2” x 3/8” Poly Hose Barb Tee....................... 2.16 TK HBT050-075 1/2" x 1/2" x 3/4" Poly Hose Barb Tee....................... 2.56 TK HBT075-050 3/4" x 3/4" x 1/2" Poly Hose Barb Tee....................... 2.56 TK HBT075-100 3/4" x 3/4" x 1" Poly Hose Barb Tee.......................... 2.16 TK HBT075 3/4" Poly Hose Barb Tee........................................... 2.56 TK HBT100-075 1" x 1" x 3/4" Poly Hose Barb Tee............................. 2.29 TK HBT100 1" Poly Hose Barb Tee.............................................. 2.69 TK HBT150-100 1-1/2" Hose Barb x 1-1/2" Hose Barb x 1" MPT....... 19.03 TK HBT150-150 1-1/2" Hose Barb x 1-1/2" Hose Barb x 1-1/2" MPT. 36.45

Polypropylene Hose Menders

Maximum Temperature is 150° F. Part No. Std. Pkg. RETAIL TK HM025 1/4" Hose Barb x 1/4" Hose Barb........ 10 $ 1.21 TK HM038 3/8” Hose Barb x 3/8” Hose Barb........ 10 1.49 TK HM050 1/2” Hose Barb x 1/2” Hose Barb........ 10 1.49 TK HM075 3/4" Hose Barb x 3/4" Hose Barb........ 10 1.62 TK HM100 1" Hose Barb x 1" Hose Barb.............. 10 1.89 TK HM125 1-1/4" Hose Barb x 1-1/4" Hose Barb. 10 2.16 TK HM150 1-1/2" Hose Barb x 1-1/2" Hose Barb. 10 3.77 TK HM200 2" Hose Barb x 2" Hose Barb.............. 10 4.85 TK HM300 3" Hose Barb x 3" Hose Barb.............. 10 14.67 Less 5% on Standard Packages

Polypropylene Gauge Tees 1/4” Gauge Port in Side of All Tees

Size Gauge Part No. FPT Ports Port RETAIL TW GTT1214 1/2" 1/4"FPT $ 3.10 TW GTT34-14 3/4" 1/4"FPT 3.77 TW GTT100-14 1" 1/4"FPT 11.86 TW GTT114-14 1-1/4" 1/4"FPT 11.06 TW GTT112-14 1-1/2" 1/4"FPT 14.27 TW GTT200-14 2” 1/4” FPT 17.02

Part No. Std. Pkg. RETAIL TK TEG075 3/4” Tee with 1/4” ....... 10 $ 19.70 TK TEG100 1” Tee with 1/4” .......... 10 19.70

Reducing Nipples

IND

Poly Hose Barb Elbow Poly 90° 1" Hose Maximum Temperature Barb Elbow is 140° F. Std. Part No. Pkg. RETAIL TK HBEL100-90 1" Poly Hose Barb Elbow 90°....................... 10 $ 2.56

Pipe Thread X Hose Barb

90° Pipe Thread x Hose Barb Elbows

1" MPT

Poly Manifold This poly manifold has a 3/4" FPT inlet, eight 1/2" FPT outlet ports and a 1/4" FPT gauge port. Maximum pressure is 100 PSI. Part No.

RETAIL

TK TM075/050 $ 34.04

www.dultmeier.com

• DAVENPORT, IA

Maximum Temperature is 150° F.

8-WAY MANIFOLD

(800) 553-6975

E0864

Polypropylene Pipe Fittings

Polypropylene

PIPE FITTINGS Pipe Nipples (Long Sizes)

Hex Nipples (Close Sizes)

Bushings

Reducers

Plugs

Caps

While having excellent chemical resistance, Polypropylene fittings lack the strength of the Nylon (shown on adjacent pages) but are compatible with certain acids which attack Nylon. Polypropylene is the best selection for ACID based products.

Std. Part No. Size Pkg. RETAIL TK 900-1/4XCL 1/4" x Close 10 $ 1.35 TK 900-3/8XCL 3/8” x Close 10 1.35 TK 900-1/2XCL 1/2" x Close 10 1.49 TK 900-1/2X3 1/2" x 3" 10 2.83 TK 900-3/4XCL 3/4" x Close 10 1.35 TK 900-3/4X4 3/4" x 4" 10 2.96 TK 900-3/4X6 3/4" x 6" 10 3.50 TK 900-1XCL 1" x Close 10 1.89 TK 900-1X4 1" x 4" 10 3.23 TK 900-1X6 1" x 6" 10 3.90 TK 900-1-1/4XCL 1-1/4" x Close 10 2.16 TK 900-1-1/4X4 1-1/4” x 4” 10 3.90 TK 900-1-1/4X6 1-1/4" x 6" 10 4.31 TK 900-1-1/2XCL 1-1/2" x Close 10 3.50 TK 900-1-1/2X3 1-1/2" x 3" 10 4.98 TK 900-1-1/2X4 1-1/2" x 4" 10 8.24 TK 900-1-1/2X6 1-1/2" x 6" 10 9.72 TK 900-2XCL 2" x Close 10 3.77 TK 900-2X4 2" x 4" 10 7.97 TK 900-2X6 2" x 6" 10 9.18 TK 900-3XCL 3" x Close 10 11.86 TK 900-3X4 3" x 4" 10 17.96 TK 900-3X6 3" x 6" 10 22.91 TK 900-4XCL 4" x Close 10 22.11

TK 901-3/8X1/4 TK 901-1/2X1/4 TK 901-1/2X3/8 TK 901-3/4X1/4 TK 901-3/4X3/8 TK 901-3/4X1/2 TK 901-1X1/4 TK 901-1X1/2 TK 901-1X3/4 TK 901-1-1/4x3/4 TK 901-1-1/4X1 TK 901-1-1/2X3/4 TK 901-1-1/2X1 TK 901-1-1/2X114 TK 901-2X3/4 TK 901-2X1 TK 901-2X1-1/4 TK 901-2X1-1/2 TK 901-3X1-1/2 TK 901-3X2 TK 901-4X3

3/8" x 1/4" 1/2" x 1/4" 1/2" x 3/8" 3/4" x 1/4" 3/4" x 3/8" 3/4" x 1/2" 1" x 1/4" 1" x 1/2" 1" x 3/4" 1-1/4" x 3/4" 1-1/4" x 1" 1-1/2" x 3/4" 1-1/2" x 1" 1-1/2" x 1-1/4" 2" x 3/4" 2" x 1" 2" x 1-1/4" 2" x 1-1/2" 3" x 1-1/2" 3" x 2" 4" x 3"

10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10

$ 2.96 2.43 2.96 2.96 2.96 2.96 3.23 3.23 2.69 3.23 3.23 4.18 4.18 4.18 3.63 3.63 4.58 3.63 18.63 15.54 28.81

TK 902-1X3/4 TK 902-1-1/2X1 TK 902-1-1/2X114 TK 902-2X1 TK 902-2X1-1/4 TK 902-2X1-1/2 TK 902-3X2

1" x 3/4" 1-1/2" x 1" 1-1/2" x 1-1/4" 2" x 1" 2" x 1-1/4" 2" x 1-1/2" 3" x 2"

10 10 10 10 10 10 10

$ 6.59 11.32 11.32 9.98 11.99 9.98 35.38

TK 903-1/4 1/4" TK 903-3/8 3/8” TK 903-1/2 1/2” TK 903-3/4 3/4" TK 903-1 1" TK 903-1-1/4 1-1/4" TK 903-1-1/2 1-1/2" TK 903-2 2" TK 903-3 3"

10 10 10 10 10 10 10 10 10

$ 3.23 2.43 3.23 3.23 3.23 4.18 4.65 4.18 19.43

TK 904-1/4 1/4" TK 904-3/8 3/8” TK 904-1/2 1/2” TK 904-3/4 3/4" TK 904-1 1" TK 904-1-1/4 1-1/4" TK 904-1-1/2 1-1/2" TK 904-2 2" TK 904-3 3"

10 10 10 10 10 10 10 10 10

$ 2.29 2.43 6.06 6.06 5.12 6.77 8.51 9.98 35.38

Couplings

Part No. Size

Std. Pkg. RETAIL

TK 905-1/4 1/4" 10 $ 3.90 TK 905-3/8 3/8" 10 4.58 TK 905-1/2 1/2” 10 4.45 TK 905-3/4 3/4" 10 4.45 TK 905-1 1" 10 4.31 TK 905-1-1/4 1-1/4" 10 6.90 TK 905-1-1/2 1-1/2" 10 9.45 TK 905-2 2" 10 10.79 TK 905-3 3" 10 29.88

Tees

TK 906-1/4 1/4" 10 $ 4.31 TK 906-3/8 3/8” 10 4.45 TK 906-1/2 1/2" 10 3.77 TK 906-3/4 3/4" 10 4.18 TK 906-1 1" 10 5.92 TK 906-1-1/4 1-1/4" 10 8.11 TK 906-1-1/2 1-1/2" 10 9.72 TK 906-2 2" 10 12.13 TK 906-3 3" 10 57.35

90° Elbows

TK 907-1/4 1/4" 10 $ 3.23 TK 907-3/8 3/8” 10 4.31 TK 907-1/2 1/2" 10 4.05 TK 907-3/4 3/4" 10 3.50 TK 907-1 1" 10 4.18 TK 907-1-1/4 1-1/4" 10 6.32 TK 907-1-1/2 1-1/2" 10 9.72 TK 907-2 2" 10 9.72 TK 907-3 3" 10 49.18

45° Elbow Part No. Size

TK EL100-45 1"

Std. Pkg.

- $ 13.47

Std. Part No. Size Pkg. TK 908-1/4 1/4" 10 $ 3.23 TK 908-3/8 3/8” 10 3.77 TK 908-1/2 1/2" 10 3.50 TK 908-3/4 3/4" 10 3.63 TK 908-1 1" 10 4.31 TK 908-1-1/4 1-1/4" 10 5.92 TK 908-1-1/2 1-1/2" 10 8.38 TK 908-2 2" 10 9.98 TK 908-3 3" 10 50.92

90˚ Street Elbows

45˚ Street Elbows

TK 912-3/4 3/4" 10 $ 7.04 TK 912-1 1" 10 9.45 TK 912-1-1/4 1-1/4" 10 11.73 TK 912-1-1/2 1-1/2" 10 12.53 TK 912-2 2" 10 13.47 TK 912-3 3" 10 55.61

Crosses

TK 909-1/4 1/4" 10 $ 11.59 TK 909-3/8 3/8” 10 12.80 TK 909-1/2 1/2” 10 19.83 TK 909-3/4 3/4” 5 19.83 TK 909-1 1" 5 19.83 TK 909-1-1/4 1-1/4" 5 29.61 TK 909-1-1/2 1-1/2" 5 29.61 TK 909-2 2" 5 30.15

THREAD SEALANT FOR POLYPROPYLENE FITTINGS: #7 Rectorseal is best for AGR/Chemicals & fertilizers including acid based. #5 or #21 Rectorseal (Same product, #21 is black) would be second choice but will not handle acid based products. All should have a 24 hour cure time before pressurizing the system. On large size threads (2"+), must apply to both sides.

Less 10% Discount On Std. Pkgs. IND

DULTMEIER SALES • OMAHA, NE

(800) 228-9666

•

www.dultmeier.com

• DAVENPORT, IA

(800) 553-6975

E0335

Nylon Fittings

90° ELBOWS

90° ST. ELBOWS

TEES

COUPLINGS

PLUGS — Hex Head—

HEX NIPPLES

BUSHINGS

MPT x BARB

Std. Std.Pkg. Part No. Size Pkg. Discount RETAIL TW LL1212 1/2" 25 25% $ 4.98 TW LL3434 3/4" 10 25% 5.65 TW LL100 1" 10 25% 7.30 TW LL114 1-1/4" 10 25% 10.12 TW LL200 2" 10 25% 20.37

Nylon fittings are usually good to 150 PSI and 175˚ F. They have good resistance to most agricultural chemicals, non-acid based fertilizers, petroleum fuels, ethanol, and most sodium chemicals. They should not be used with acid based fertilizers, chlorine, fluorides, xylene, compressed gases or hydrochloric, sulfuric, nitric or phosphoric acid.

Std. Std.Pkg. Part No. MPT Barb Pkg. Discount RETAIL TW A1814 1/8" 1/4" 25 25% $ 0.67 TW A1838 1/8" 3/8" 25 25% 0.67 TW A1414 1/4" 1/4" 25 25% 0.80 TW A1438 1/4" 3/8" 25 25% 0.80 TW A1412 1/4" 1/2" 25 25% 0.80 TW A3814 3/8" 1/4" 25 25% 0.67 TW A3838 3/8" 3/8" 25 25% 0.80 TW A3812 3/8" 1/2" 25 25% 0.80 TW A3858 3/8" 5/8" 25 25% 0.80 TW A1214 1/2" 1/4" 25 25% 0.80 TW A1238 1/2" 3/8" 25 25% 0.80 TW A1212 1/2" 1/2" 25 25% 0.80 TW A1258 1/2" 5/8" 25 25% 0.80 TW A1234 1/2" 3/4" 25 25% 0.80 TW A3414 3/4" 1/4" 25 25% 1.07 TW A3438 3/4" 3/8" 25 25% 0.80 TW A3412 3/4" 1/2" 25 25% 0.94 TW A3458 3/4" 5/8" 25 25% 0.94 TW A3434 3/4" 3/4" 25 25% 0.94 TW A3410 3/4" 1" 25 25% 1.35 TW A1034 1" 3/4" 25 25% 1.35 TW A1010 1" 1" 25 25% 1.62 TW A114-34 1-1/4" 3/4" 10 25% 2.56 TW A1141 1-1/4" 1" 10 25% 2.56 TW A114 1-1/4" 1-1/4" 10 25% 2.69 TW A114-112 1-1/4" 1-1/2" 10 25% 2.96 TW A112-114 1-1/2" 1-1/4" 10 25% 2.69 TW A112 1-1/2" 1-1/2" 10 25% 2.96 TW A200 2" 2" 10 25% 5.25

PIPE to HOSE BARB — Straight —

Std. Std Pkg. Part No. Size Pkg. Discount RETAIL TW SE14 1/4" 25 25% $ 3.10 TW SE12 1/2" 25 25% 3.77 TW SE34 3/4" 25 25% 4.58 TW SE100 1" 10 25% 8.11 TW SE114 1-1/4" 10 25% 10.39 TW SE112 1-1/2" 10 25% 11.73 TW SE200 2" 10 25% 15.14 D

Std. Std.Pkg. Part No. Size Pkg. Discount RETAIL TW TT14 1/4" 25 25% $ 4.98 TW TT12 1/2" 10 25% 5.39 TW TT34 3/4" 10 25% 6.46 TW TT100 1" 10 25% 12.40 TW TT114 1-1/4" 10 25% 16.21 TW TT112 1-1/2" 10 25% 15.68 TW TT200 2" 10 25% 23.45 Std. Std.Pkg. Part No. Size Pkg. Discount RETAIL TW FC18 1/8" 25 25% $ 4.72 TW FC14 1/4" 25 25% 4.72 TW FC12 1/2" 25 25% 3.77 TW FC38 3/8" 25 25% 4.72 TW FC34 3/4" 10 25% 4.05 TW FC100 1" 25 25% 4.31 TW FC114 1-1/4" 10 25% 4.98 TW FC112 1-1/2" 5 25% 6.32 TW FC200 2" 5 25% 7.17

PIPE to HOSE BARB

Std. Std. Pkg. Part No. Size Pkg. Discount RETAIL TW F1800 1/8" 25 25% $ 0.67 TW F1400 1/4" 25 25% 0.80 TW F3800 3/8" 25 25% 0.80 TW F1200 1/2" 25 25% 0.80 TW F3400 3/4" 25 25% 0.80 TW F1000 1" 25 25% 1.21 TW F1014 1-1/4" 10 25% 2.02 TW F112 1-1/2" 10 25% 2.56 TW F200 2" 10 25% 2.96 * 2” Buttress Thread (Polyethylene).

Std. Std.Pkg. Part No. Size Pkg. Discount RETAIL TW M1400 1/4" 25 25% $ 0.80 TW M3800 3/8" 25 25% 0.80 TW M3814 3/8" X 1/4" 25 25% 0.80 TW M1200 1/2" 25 25% 0.80 TW M1238 1/2" X 3/8" 25 25% 0.80 TW M3400 3/4" 25 25% 0.94 TW M3412 3/4" X 1/2" 25 25% 0.94 TW M1000 1" 25 25% 1.49 TW M1140 1-1/4" 10 25% 2.56 TW M1120 1-1/2" 10 25% 4.85 TW M2000 2" 10 25% 6.06

FEMALE PIPE to HOSE BARB - Elbows FPT x BARB

(800) 228-9666

Part No. TW EL14F TW EL1438F TW EL3814F TW EL38F TW EL3812F TW EL1212F TW EL1234F TW EL3412F TW EL3458F TW EL3434F

Std. Std.Pkg. Part No. Size Pkg. Discount RETAIL TW RB38-14 3/8"x1/4" 25 25% $ 1.49 TW RB12-14 1/2" x 1/4" 25 25% 1.49 TW RB12-38 1/2" x 3/8" 25 25% 2.56 TW RB34-18 3/4" x 1/8" 25 25% 2.02 TW RB34-14 3/4" x 1/4" 25 25% 1.76 TW RB34-38 3/4" x 3/8" 25 25% 1.76 TW RB34-12 3/4" x 1/2" 25 25% 1.76 TW RB10-34 1" x 3/4" 25 25% 2.96 TW RB114-34 1-1/4" x 3/4" 10 25% 4.45 TW RB114-1 1-1/4" x 1" 10 25% 3.63 TW RB112-1 1-1/2" x 1" 10 25% 4.72 TW RB112-114 1-1/2" x 1-1/4" 10 25% 5.65 TW RB200-100 2" x 1" 10 25% 8.38 TW RB200-114 2" x 1-1/4" 10 25% 7.30 TW RB200-112 2" x 1-1/2" 10 25% 6.32 TW RB300-200 3" x 2" 10 25% 19.97

DULTMEIER SALES • OMAHA, NE

MPT x BARB Std. Std.Pkg. Part No. MPT Barb Pkg. Discount RETAIL TW EL1814 1/8" 1/4" 25 25% $ 1.62 TW EL1838 1/8" 3/8" 25 25% 1.21 TW EL1414 1/4" 1/4" 25 25% 1.07 TW EL1438 1/4" 3/8" 25 25% 1.21 TW EL1412 1/4" 1/2" 25 25% 1.21 TW EL3838 3/8" 3/8" 25 25% 1.21 TW EL3812 3/8" 1/2" 25 25% 1.21 TW EL1238 1/2" 3/8" 25 25% 1.21 TW EL1212 1/2" 1/2" 25 25% 1.21 TW EL1258 1/2" 5/8" 25 25% 1.49 TW EL1234 1/2" 3/4" 25 25% 1.49 TW EL3414 3/4” 1/4” 25 25% 1.49 TW EL3438 3/4" 3/8" 25 25% 1.49 TW EL3412 3/4" 1/2" 25 25% 1.62 TW EL3458 3/4" 5/8" 25 25% 1.62 TW EL3434 3/4" 3/4" 25 25% 1.62 TW EL3410 3/4" 1" 25 25% 2.83 TW EL1012 1" 1/2" 25 25% 2.56 TW EL1034 1" 3/4" 25 25% 2.56 TW EL1010 1" 1" 25 25% 2.83 TW EL1141 1-1/4" 1" 10 25% 4.98 TW EL114 1-1/4" 1-1/4" 10 25% 4.05 TW EL114-34 1-1/4" 3/4" 10 25% 5.79 TW EL114-112 1-1/4" 1-1/2" 10 25% 8.91 TW EL112 1-1/2" 1-1/2" 10 25% 7.71 TW EL200 2" 2" 10 25% 9.72

ELBOWS

Std. Std.Pkg. FPT Barb Pkg. Discount RETAIL 1/4" 1/4" 25 25% $ 2.96 1/4" 3/8" 25 25% 3.50 3/8" 1/4" 25 25% 3.36 3/8" 3/8" 25 25% 3.23 3/8" 1/2" 25 25% 3.02 1/2" 1/2" 25 25% 2.43 1/2" 3/4" 25 25% 3.10 3/4" 1/2" 25 25% 3.23 3/4" 5/8" 25 25% 3.36 3/4" 3/4" 25 25% 4.85

Female Pipe to Hose Barb FPT x BARB

•

www.dultmeier.com

Part No. FPT Barb TW Q1414 1/4" 1/4" TW Q1438 1/4" 3/8" TW Q3814 3/8" 1/4" TW Q3838 3/8" 3/8" TW Q3812 3/8" 1/2" TW Q1214 1/2" 1/4" TW Q1238 1/2" 3/8" TW Q1212 1/2" 1/2" TW Q1234 1/2" 3/4" TW Q3438 3/4" 3/8" TW Q3412 3/4" 1/2" TW Q3434 3/4" 3/4" TK HBF100 1" 1"

• DAVENPORT, IA

Std. Std. Pkg. Pkg. Discount RETAIL 25 25% $ 2.96 25 25% 2.96 25 25% 2.96 25 25% 2.96 25 25% 2.96 25 25% 2.96 25 25% 2.96 25 25% 2.16 25 25% 2.96 25 25% 3.50 25 25% 3.36 50 25% 3.23 10 5% 2.56

(800) 553-6975

E0336

Hose Fittings & Menders NYLON HOSE FITTINGS

HOSE MENDERS BRASS HOSE MENDERS *

NYLON HOSE MENDERS

Rated to 150 PSI W.P.

Hose Barb x Hose Barb

For I.D. Std. Std.Pkg. Part No. Hose Pkg. Discount RETAIL TW SHM1400 1/4" x 1/4" 25 25% $ 0.67 TW SHM3800 3/8" x 3/8" 25 25% 0.67 TW SHM1200 1/2" x 1/2" 25 25% 0.80 TW SHM1238 1/2" x 3/8" 25 25% 0.94 TW SHM3814 3/8” x 1/4” 25 25% 0.54 TW SHM5800 5/8" x 5/8" 50 25% 0.94 TW SHM3400 3/4" x 3/4" 25 25% 1.07 TW SHM1000 1" x 1" 25 25% 1.49 TW SHM114 1-1/4" x 1-1/4" 10 25% 2.56 TW SHM112 1-1/2" x 1-1/2" 10 25% 4.31 TW SHM200 2" x 2" 10 25% 12.13 EV TM46 4" x 4" 1 - 49.25

NYLON ELBOW HOSE BARBS STD. Std.Pkg. Part No. Hose Barb PKG. Discount RETAIL 25% $ 1.21 TW EL3838HB 3/8" x 3/8" 25 TW EL1212HB 1/2" x 1/2" 25 25% 1.07 TW EL58HB 5/8” x 5/8” 25 25% 1.21 TW EL3434HB 3/4" x 3/4" 25 25% 1.49 TW EL100HB 1" x 1" 25 25% 2.69 TW EL112HB 1-1/2" x 1-1/2" 10 25% 6.46 TW EL114HB 1-1/4" x 1-1/4" 10 25% 6.19 TW EL200HB 2" x 2" 5 25% 9.98

NYLON HOSE BARB TEES

For I.D. Std. Std.Pkg. Part No. Hose Pkg. Discount RETAIL TW T14 1/4" 25 25% $ 1.21 TW T38 3/8" 25 25% 1.21 TW T12 1/2" 25 25% 1.35 TW T58 5/8" 10 25% 1.35 TW T34 3/4" 25 25% 1.49 TW T3412 3/4" X 1/2" 25 25% 3.63 TW T100 1" 25 25% 2.29 TW T114 1-1/4" 10 25% 4.85 TW T112 1-1/2" 10 25% 5.52 TW T200 2" 10 25% 14.27

Part No. Std. Pkg. Std. Pkg. Disc. RETAIL TW R1212 25 25% $ 4.69

King Nipples (Hose Barbs) Beveled End for Welded Connections Unplated Steel or Stainless Steel

Beveled End for Welded Connections – Stainless Steel (316SS) –

Part No. Size RETAIL EV STB20 1-1/2" $ 4.05 EV STB25 2" 5.92 EV STB30 2-1/2" 9.72 EV STB35 3" 13.33 EV STB40 4" 20.90 EV STB50 5" 34.04 EV STB60 6" 50.52 EV STB80 8” 84.42

Part No. Size RETAIL EV RSTB20 1-1/2" $ 26.93 EV RSTB25 2" 41.54 EV RSTB35 3" 66.06 EV RSTB40 4" 107.87 EV RSTB60 6" 353.76

King Nipples in Jump Sizes

– Plated Steel –

Part No. Hose Shank Male NPT RETAIL EV STC1015 1" 1-1/4" $ 4.98 EV STC1510 1-1/4" 1" 4.98 EV STC1520 1-1/4" 1-1/2" 11.59 EV STC2015 1-1/2" 1-1/4" 17.69 EV STC2025 1-1/2" 2" 25.06 EV STC2520 2" 1-1/2" 8.11 EV STC2535 2” 3” 12.80 EV STC3525 3” 2” 13.74 EV STC3540 3" 4" 61.98 EV STC4035 4" 3" 70.35

IND

DULTMEIER SALES • OMAHA, NE

(800) 228-9666

STEEL (Zinc-Plated) HOSE MENDERS * 150 PSI • Hose Barb x Hose Barb Part No. RETAIL EV DMA 1/4" Steel Hose Mender.............. $ 1.21 EV DMB 3/8” Steel Hose Mender.............. 1.76 EV DM1 1/2” Steel Hose Mender.............. 1.55 EV DM6 3/4” Steel Hose Mender.............. 8.58 EV DM11 1” Steel Hose Mender.............. 2.01 EV DM16 1-1/4” Steel Hose Mender........... 2.63 EV DM21 1-1/2” Steel Hose Mender.............. 2.99 EV DM26 2” Steel Hose Mender.............. 4.78 EV DM36 3” Steel Hose Mender.............. 9.51 EV DM46 4” Steel Hose Mender.............. 12.66 EV DM66 6” Steel Hose Mender.............. 34.57 EV DM86 8” Steel Hose Mender.............. 70.35

304/316SS HOSE MENDERS * 150 PSI • Hose Barb x Hose Barb Part No. Size S.S. RETAIL EV RM2 1/4" 316 $ 12.06 EV RM3 3/8” 316 13.13 EV SF50S 1/2” 304 3.23 EV RM4 1/2” 316 18.36 EV SF75S 3/4” 304 5.12 EV RM6 3/4” 316 22.51 EV SF100S 1” 304 6.46 EV RDM11 1” 316 44.56 EV SF125S 1-1/4” 304 9.18 EV RDM16 1-1/4” 316 46.57

Part No. Size S.S. EV SF150S 1-1/2” 304 EV RDM21 1-1/2” 316 EV SF200S 2” 304 EV RDM26 2” 316 EV SF300S 3” 304 EV RDM36 3” 316 EV SF400S 4” 304 EV RDM46 4” 316 EV SF600S 6” 304

RETAIL 11.73 51.93 19.03 57.29 39.13 125.96 55.34 149.75 156.45

King Nipples (Hose Barbs)

NYLON 1/2" MPT TEES

Beveled End for Welded Connections – Unplated Steel –

Part No. RETAIL EV BM2 1/4" Brass Hose Mender................. $ 0.80 EV BM3 3/8” Brass Hose Mender................. 1.62 EV BM4 1/2” Brass Hose Mender................. 2.28 EV BM5 5/8” Brass Hose Mender................. 2.43 EV BM6 3/4” Brass Hose Mender................. 2.96

* Not for compressible products such as air, nitrogen or steam. Working pressure may vary with the construction of the hose, clamping system and the application. Rubber Manufacturers Association RMA) handbook outlines field testing procedures for hose menders which should be followed exactly.

POLY WYES

Part No. RETAIL AF Y14N 1/4" Polypropylene WYE........ $ 2.96 AF Y38N 3/8" Polypropylene WYE ....... 2.96 AF Y12N 1/2" Polypropylene WYE ....... 2.96

•

Steel & Stainless, MPT X HB Part No. MPT & Shank Dia. Material **Std.Pkg. RETAIL TF STN050 * 1/2” Steel King - $ 1.58 TF STN075 * 3/4” Steel King - 1.74 TF STN100 * 1" Steel King 50 2.01 TF STN125 * 1-1/4" Steel King 40 2.59 TF STN150 * 1-1/2" Steel King 40 3.03 TF STN200 * 2" Steel King 40 3.86 TF STN250 * 2-1/2" Steel King 10 8.11 TF STN300 * 3" Steel King 12 10.79 TF STN400 * 4" Steel King 8 13.80 TF STN600 * 6" Steel King 4 34.84 TF STN800 * 8” Steel King 4 73.03 EV RST-1/4 1/4" 316 SS Hex - 4.02 EV RST-3/8 3/8” 316 SS Hex - 4.82 EV RST1 1/2" 316 SS Hex - 6.43 TK HB075SS 3/4" 316 SS Hex - 7.10 TK HB100SS 1" 316 SS Hex - 10.72 TK HB125SS 1-1/4" 316 SS Hex - 14.61 TK HB150SS 1-1/2" 304 SS Hex - 18.76 TK HB200SS 2” 316 SS Hex - 29.61 EV RST30 *2-1/2” 316 SS King - 31.36 TK HB300SS *3" 316 SS King - 68.34 TK 316-A300 3” 316 S.S. Hex Nipple - 97.15 EV RST40 4” 316 S.S. Hex Nipple - 119.93 EV RST60 *6” 316.S.S. King Nipple - 309.54 Jump Sizes EV RST-1/4X1/8 1/8” MPT x 1/4” HB 304S.S. Hex 4.45 TK HB025/038SS 1/4” MPT x 3/8” HB 316 S.S. Hex 4.02 TK HB025/050SS 1/4” MPT x 1/2” HB 316 S.S. Hex 4.02 TK HB038/050SS 3/8” MPT x 1/2” HB 316 S.S. Hex 4.82 EV RST-3/8X1/2 1/2” MPT x 3/8” HB 316 S.S. Hex 7.77 TK HB050/058SS 1/2” MPT x 5/8” HB 316 S.S. Hex 20.77 TK HB050/075SS 1/2” MPT x 3/4” HB 316 S.S. Hex 7.10 TK HB075/050SS 3/4” MPT x 1/2” HB 316 S.S. Hex 20.77 TK HB075/100SS 3/4” MPT x 1” HB 316 S.S. Hex 8.17 TK HB100/075SS 1” MPT x 3/4” HB 316 S.S. Hex 29.08 EV RST1510 *1” MPT x 1-1/4” HB 316 S.S. King 55.28 EV RST2520 *1-1/2” MPT x 2” HB 316 S.S. King 74.37 EV RST2025 *2” MPT x 1-1/2” HB 316 S.S. King 75.71 EV RST3525 *2” MPT x 3” HB 316 S.S. King 105.86 * King Nipple Style - No Hex. **10% Quantity Discount on Std. Pkgs. www.dultmeier.com

• DAVENPORT, IA

(800) 553-6975

King

Hex See "Steel Hose Fittings" on adjacent pages for smaller sizes

E0339

PVC Fittings

*Discounts from PVC Net Prices (entire page): STANDARD PACKAGE DISCOUNT: 10%

PVC Couplings

PVC Caps

SLIP

THREADED Part No. Schedule *Std. Pkg. RETAIL PL 448-1 40 50 $ 1.22 PL 448-1-1/4 40 25 2.01 PL 448-1-1/2 40 25 2.16 PL 448-2 40 10 2.43 PL 448-3 40 - 6.83 PL 448-4 40 - 10.92 PL 448-6 40 - 18.83 PL 848-1 80 25 4.14 PL 848-2 80 10 10.92 PL 848-3 80 5 24.59 PL 848-4 80 5 49.45

Discounts from Net Prices

Standard Pkg. Discount: 10%

Part No. Schedule *Std. Pkg. RETAIL PL 447-1 40 50 $ 0.62 PL 447-1-1/4 40 25 0.82 PL 447-1-1/2 40 25 0.87 PL 447-2 40 10 1.57 PL 447-3 40 10 3.63 PL 447-4 40 - 7.71 PL 847-2 80 5 10.72 PL 847-3 80 5 28.68 PL 847-4 80 5 38.73

THREADED

SLIP

Part No. Schedule Std. Pkg. RETAIL PL 430-1 40 50 $ 1.55 PL 830-1/2 80 25 2.69 PL 830-3/4 80 25 5.82 PL 830-1 80 15 7.84 PL 830-1-1/4 80 10 9.58 PL 830-1-1/2 80 10 11.59 PL 830-2 80 10 12.06 PL 830-3 80 - 29.75 PL 830-4 80 - 53.73

* Standard Pkg. Discount: 10%

Part No. Schedule Std. Pkg. RETAIL PL 429-1 40 50 $ 0.67 PL 429-1-1/4 40 25 1.07 PL 429-1-1/2 40 25 0.94 PL 429-2 40 25 1.19 PL 429-3 40 10 6.06 PL 429-4 40 6 6.12 PL 829-2 80 20 5.79 PL 829-3 80 5 16.15 PL 829-4 80 5 20.17

* Standard Pkg. Discount: 10%

PVC Tees

PVC Flanges (ANSI 150 CLASS) Schedule 80

THREADED

SLIP

Part No. Schedule *Std. Pkg. RETAIL PL 405-1 40 50 $ 4.85 PL 405-1-1/2 40 25 6.90 PL 405-2 40 10 6.66 PL 805-1/2 80 25 4.45 PL 805-3/4 80 25 4.96 PL 805-1 80 15 10.92 PL 805-1-1/4 80 10 11.66 PL 805-1-1/2 80 5 13.94 PL 805-2 80 5 15.01 PL 805-3 80 5 55.07 PL 805-4 80 5 91.12

Part No. Schedule *Std. Pkg. RETAIL PL 401-1/2 40 50 $ 0.60 PL 401-3/4 40 50 0.87 PL 401-1 40 50 0.94 PL 401-1-1/4 40 25 2.02 PL 401-1-1/2 40 25 1.69 PL 401-2 40 10 2.65 PL 401-3 40 - 11.32 PL 401-4 40 - 16.48 PL 801-2 80 10 17.35 PL 801-3 80 5 22.85 PL 801-4 80 5 26.60

* Standard Pkg. Discount: 10% Part No. Schedule *Std. Pkg. RETAIL PL 402-1/2 40 50 $ 0.56 PL 402-3/4 40 50 0.87 PL 402-1 40 50 1.59 PL 402-1-1/4 40 25 2.56 PL 402-1-1/2 40 25 3.10 PL 402-2 40 10 3.97 PL 402-3 40 10 15.41 PL 402-4 40 - 31.22

Schedule 80

THREADED

SLIP

Part No. Size *Std. Pkg. RETAIL PL 852-020 2" 5 $ 16.88 PL 852-030 3" 5 38.99 PL 852-040 *4" 5 73.70

Part No. Size *Std. Pkg. RETAIL PL 851-020 2" 5 $ 11.93 PL 851-030 3" 5 20.17 PL 851-040 *4" 5 25.39 PL 851-060 *6” 5 38.19

Note: 2 & 3" Flanges have 4-Bolt Holes, 4" & 6” Flanges have 8-Bolt holes.

* Standard Pkg. Discount: 10% Reductions *Std. Part No. MPT Available Schedule Pkg. RETAIL PL 439-3/4 3/4" 3 40 50 $ 1.62 PL 439-1 1" 1 40 50 1.31 PL 439-1-1/4 1-1/4" 2 40 25 2.93 PL 439-1-1/2 1-1/2" 3 40 25 2.83 PL 439-2 2" 2 40 10 4.05 PL 839-2 2" 4 80 10 9.05 PL 839-3 3" 3 80 10 16.42 PL 839-4 4” 2 80 - 33.63

PVC Tees (Sch. 40) (Slip x Slip x FPT) D

Reducing Bushings (Threaded)

* Standard Pkg. Discount: 10%

PVC Elbows

THREADED

Part No. Schedule *Std. Pkg. RETAIL PL 408-1 40 50 $ 3.77 PL 408-2 40 10 7.84 PL 808-1/2 80 25 3.20 PL 808-3/4 80 25 4.02 PL 808-1 80 10 5.05 PL 808-2 80 15 8.44 PL 808-3 80 5 49.58 PL 808-4 80 5 88.44

Part No. NPT Pipe Size * Std. Pkg. PL 8268-1/2 1/2" x CIose 25 1/2" x 2"L 25 1/2" x 4"L 25 1/2" x 6"L 25 PL 8268-3/4 3/4" x CIose 25 3/4" x 2"L 25 3/4" x 4"L 25 3/4" x 6"L 25 PL 8268-1 1" x CIose 25 1" x 2"L 25 1" x 4"L 25 1" x 6"L 25 1 PL 8268-1 /4 1-1/4" x CIose 25 1-1/4" x 2"L 25 1-1/4" x 4"L 25 1-1/4" x 6"L 25 1 PL 8268-1 /2 1-1/2" x CIose 25 1-1/2" x 4"L 25 1-1/2" x 6"L 25 PL 8268-2 2" x CIose 25 2" x 4"L 25 2" x 6"L 25 PL 889-005 3" x Close - PL 889-040 3" x 4"L - PL 889-060 3" x 6"L - PL 890-005 4" x Close - PL 890-040 4" x 4"L - PL 890-060 4" x 6"L -

SLIP

Part No. Schedule *Std. Pkg. RETAIL PL 406-1 40 50 $ 0.80 PL 406-1-1/4 40 25 1.14 PL 406-1-1/2 40 25 1.27 PL 406-2 40 25 2.00 PL 406-3 40 - 7.57 PL 406-4 40 - 17.09 PL 806-2 80 20 4.82 PL 806-3 80 5 12.66 PL 806-4 80 5 18.83

* Standard Pkg. Discount: 10% FPT *Std. Part No. Size Pkg. RETAIL PL 858-1/2 1/2" 5 $ 5.79 PL 858-3/4 3/4" 5 8.04 PL 858-1 1" 5 10.72 PL 858-1-1/4 1-1/4" 5 20.23 PL 858-1-1/2 1-1/2" 5 24.59 PL 858-2 2" 2 38.86 PL 858-3 3" - 88.44 PL 858-4 4” - 103.85

IND

PVC Unions

with Viton® O-Rings Schedule 80

(800) 228-9666

Schedule 80 PVC Nipples

Viton® is a registered trademark of DuPont Performance Elastomers

* Standard Pkg. Discount: 10%

DULTMEIER SALES • OMAHA, NE

RETAIL $ 2.00 2.14 2.67 3.47 2.12 2.26 3.03 2.26 1.96 2.12 2.56 3.40 2.22 2.69 3.18 3.36 2.77 4.56 5.45 3.63 5.92 7.97 7.30 18.83 23.58 20.64 26.26 26.26

•

www.dultmeier.com

• DAVENPORT, IA

(800) 553-6975

E0347

PVC Fittings PVC Manifold Flanged Socket Fittings

PVC Elbows

Part No. Schedule *Std. Pkg. RETAIL PL 407-1 40 50 $ 1.35 PL 407-1-1/4 40 25 2.02 PL 407-1-1/2 40 25 2.43 PL 407-2 40 10 4.29 PL 407-3 40 8 21.84 PL 407-4 40 4 26.60

(Slip x FPT) D

FEATURES: • Fits Standard Banjo Flanged Valves & Fittings • Quick & Easy Assembly

Standard Pkg. Discount: 10%

• Banjo Flange X PVC Slip Fittings

90˚ ST Ells

• Made of Schedule 80 PVC • 1” & 2” Fitting Pressure Rated to 150 PSI @ 70° F.

Plugs

- THREADED -

• 3” Fitting Pressure Rated to 125 PSI @ 70° F.

Part No. Schedule *Std. Pkg. RETAIL PL 412-1 40 50 3.03 PL 412-1-1/4 40 25 3.77 PL 412-1-1/2 40 25 4.11 PL 412-2 40 10 7.84 Standard Pkg. Discount: 10%

D D

- THREADED -

Part No. Schedule *Std. Pkg. RETAIL PL 450-1 40 50 $ 1.62 PL 450-1-1/4 40 25 2.02 PL 450-1-1/2 40 25 2.16 PL 450-2 40 10 2.22 PL 450-3 40 10 5.39 PL 450-4 40 - 10.12

Reducing Bushings Part No. TK M101GSA TK M221GSA TK M301GSA

Slip X FPT Thread (Sch. 40)

Description RETAIL 1” Manifold x 1” PVC Slip Fitting......................... $ 7.84 2” Full Port Manifold Flange x 2” PVC Fitting..... 13.60 3” Full Port Manifold Flange x 3” PVC Fitting..... 21.31 D

PVC 45° Elbows Slip X Slip

Slip X Slip

Part No. Schedule *Std. Pkg. RETAIL PL 417-1 40 50 $ 0.94 PL 417-1-1/2 40 25 1.69 PL 417-2 40 10 2.56 PL 417-3 40 - 8.38 PL 417-4 40 - 15.01 PL 817-1 80 50 5.65 PL 817-1-1/2 80 25 8.24 PL 817-2 80 5 11.39 PL 817-3 80 5 28.27 PL 817-4 80 5 50.92

Part No. Slip FPT Schedule *Std.Pkg. RETAIL PL 438-209 1-1/2" 1/2" 40 10 $ 1.82 PL 438-210 1-1/2” 3/4” 40 10 2.49 PL 438-249 2” 1” 40 10 2.22 PL 438-251 2" 1-1/2" 40 10 3.23 PL 438-338 3" 2" 40 10 4.05 PL 438-420 4" 2" 40 6 7.84 PL 438-422 4" 3" 40 6 7.84

Standard Pkg. Discount: 10% Part No. Schedule Std. Pkg. RETAIL PL 436-3/4 40 50 $ 0.35 PL 436-1 40 50 0.64 PL 436-1-1/4 40 25 1.14 PL 436-1-1/2 40 25 1.01 PL 436-2 40 25 1.31 PL 436-3 40 10 5.99 PL 436-4 40 5 10.32 PL 836-1 80 25 5.45 PL 836-1-1/2 80 10 10.25 PL 836-2 80 5 12.86 PL 836-3 80 5 16.28 PL 836-4 80 5 28.27

PVC Male Adapter (MPT x Slip)

* Standard Pkg. Discount: 10% D

PVC 45° Street Elbows Slip X Socket

Standard Pkg. Discount: 10%

Slip X Socket Part No. Schedule Std. Pkg. RETAIL PL 427-1 40 50 $ 0.94 PL 427-1-1/2 40 25 1.96 PL 427-2 40 10 2.09 PL 427-3 40 - 8.91 PL 427-4 40 - 17.02

Standard Pkg. Discount: 10%

Schedule 80 Fittings are Grey in Color. Schedule 40 Fittings are White in Color. Suggested Maximum Working Pressures for Schedule 40 and Schedule 80 PVC Fittings. (Use as a general guide only. Actual allowable working pressures may vary widely with field conditions.)

Nominal Size 1/2 3/4 1 1-1/4 1-1/2 2 2-1/2 3 3-1/2 4 5 6

Schedule 40 Working Pressure 358 289 270 221 198 166 182 158 144 133 117 106

DULTMEIER SALES • OMAHA, NE

(Slip x FPT)

Cement & Primer

Schedule 80 Working Pressure 509 413 378 312 282 243 255 225 207 194 173 167

(800) 228-9666

PVC Female Adapter

Standard Pkg. Discount: 10%

for PVC Plastic Pipe

CHARACTERISTICS:

• Slow Set—Heavy Body (For PVC pipe thru 12") D

• Product Color: Gray • ASTM #D2564-76

RECTORSEAL ®

• Flash Point 6° F. Tag CC • Steel Shank Dauber Part No. RS 55217 1 QT. Cement with Dauber Cap....... RS 55707 1 QT. Primer.....................................

Schedule 80 Fittings are Grey in Color. Schedule 40 Fittings are White in Color.

IND

Part No. Schedule Std. Pkg. RETAIL PL 435-3/4 40 50 $ 0.80 PL 435-1 40 50 0.60 PL 435-1-1/4 40 25 1.14 PL 435-1-1/2 40 25 1.21 PL 435-2 40 10 1.55 PL 435-3 40 10 4.38 PL 435-4 40 6 7.17 PL 835-1-1/2 80 10 10.92 PL 835-2 80 5 16.88 PL 835-3 80 5 30.55 PL 835-4 80 - 49.85

•

www.dultmeier.com

• DAVENPORT, IA

(800) 553-6975

RETAIL $ 23.05 29.75

E0608

Stainless Pipe Fittings - Low Pressure

304 Stainless - Rated to 150 PSI (316SS Available All Sizes) 90° Bushings Bell (MPT x FPT) ST ELL Reducers

(FPT x FPT)

Part No. Size RETAIL CT 7BR1418 1/4”X1/8” $ 3.63 CT 7BR3814 3/8’X1/4” 4.05 CT 7BR1238 1/2”X3/8” 3.90 CT 7BR3412 3/4”X1/2” 5.79 CT 7BR10012 1”X1/2” 7.17 CT 7BR10034 1”X3/4” 7.17 CT 7BR11234 1-1/2”X3/4” 14.54 CT 7BR114100 1-1/4”X1” 10.39

45° Elbows

Part No. Size RETAIL CT 7BR112100 1-1/2”X1” $ 14.67 CT 7BR200100 2”X1” 23.32 CT 7BR200114 2”X1-1/4” 22.91 CT 7BR200112 2”X1-1/2” 22.91 CT 7BR300200 3”X2” 67.67 CT 7BR4X2 4”X2” 112.56 CT 7BR4X3 4”X3” 110.55

Part No. Size RETAIL CT 7RB1418 1/4”x1/8” $ 2.16 CT 7RB3814 3/8”x1/4” 2.29 CT 7RB1214 1/2”x1/4” 2.96 CT 7RB1238 1/2”x3/8” 3.03 CT 7RB3414 3/4”x1/4” 2.43 CT 7RB3412 3/4”x1/2 4.31 CT 7RB10038 1”x3/8” 5.79 CT 7RB10034 1”x3/4” 5.79 CT 7RB11412 1-1/4”x1/2” 6.77 CT 7RB11434 1-1/4”x3/4” 10.52 CT 7RB114100 1-1/4”x1” 10.52 CT 7RB11212 1-1/2”x1/2” 11.99 CT 7RB11234 1-1/2”x3/4” 11.73 CT 7RB112100 1-1/2”x1” 12.26

Part No. Size RETAIL CT 7RB112114 1-1/2”x1-1/4” $ 11.73 CT 7RB20012 2”x1/2” 19.30 CT 7RB20034 2”x3/4” 17.42 CT 7RB200100 2”x1” 18.36 CT 7RB200114 2”x1-1/4” 19.30 CT 7RB200112 2”x1-1/2” 17.15 CT 7RB250200 2-1/2”x2” 33.23 CT 7RB300100 3”x1” 43.55 CT 7RB300200 3”x2” 42.88 CT 7RB300250 3”x2-1/2” 30.69 CT 7RB400112 4”x1-1/2” 72.36 CT 7RB400200 4”x2” 78.39 CT 7RB400300 4”x3” 78.39

D D

90° Elbows

(FPT x FPT)

Tees

(FPT x FPT)

Part No. Size RETAIL CT 7LL185 1/8” $ 3.22 CT 7LL145 1/4” 4.05 CT 7LL385 3/8” 5.25 CT 7LL125 1/2” 5.25 CT 7LL345 3/4” 4.85 CT 7LL1005 1” 9.45 CT 7LL1145 1-1/4” 14.67 CT 7LL1125 1-1/2” 17.29 CT 7LL2005 2” 24.66 CT 7LL3005 3” 85.09 CT 7LL4005 4” 147.07

Couplings (FPT x FPT)

Part No. Size RETAIL CT 7LL18 1/8" $ 3.23 CT 7LL14 1/4" 3.23 CT 7LL38 3/8" 3.77 CT 7LL12 1/2" 4.18 CT 7LL34 3/4" 5.92 CT 7LL100 1" 8.38 CT 7LL114 1-1/4" 11.46 CT 7LL112 1-1/2" 17.96 CT 7LL200 2" 22.65 CT 7LL300 3" 63.65 CT 7LL400 4" 122.61

Unions

Part No. Size RETAIL CT 7TT18 1/8" $ 4.31 CT 7TT14 1/4" 4.31 CT 7TT38 3/8" 4.85 CT 7TT12 1/2" 5.65 CT 7TT34 3/4" 9.72 CT 7TT100 1" 11.46 CT 7TT114 1-1/4" 22.11 CT 7TT112 1-1/2" 25.59 CT 7TT200 2" 32.96 CT 7TT250 2-1/2” 71.02 CT 7TT300 3" 98.49 CT 7TT400 4" 179.23

Hex Plugs

(FPT x FPT)

(FPT x FPT x FPT)

(MPT x FPT)

Part No. Size RETAIL CT 7SE18 1/8" $ 4.45 CT 7SE14 1/4" 4.45 CT 7SE38 3/8" 5.39 CT 7SE12 1/2" 6.19 CT 7SE34 3/4" 8.91 CT 7SE100 1" 14.67 CT 7SE114 1-1/4" 12.66 CT 7SE112 1-1/2" 19.90 CT 7SE200 2" 22.51 CT 7SE300 3" 86.43 CT 7SE400 4" 168.51

Caps (FPT)

Part No. Size RETAIL CT 7CP18 1/8” $ 1.76 CT 7CP14 1/4” 2.29 CT 7CP38 3/8” 2.69 CT 7CP12 1/2” 2.96 CT 7CP34 3/4” 3.63 CT 7CP100 1” 5.39 CT 7CP114 1-1/4” 9.98 CT 7CP112 1-1/2” 8.64 CT 7CP200 2” 12.80 CT 7CP250 2-1/2” 17.35 CT 7CP300 3” 35.11 CT 7CP400 4” 56.28

Crosses

(FPT x FPT)

(MPT)

D D

Part No. Size RETAIL CT 7FC18 1/8" $ 2.69 CT 7FC14 1/4" 2.56 CT 7FC38 3/8" 3.36 CT 7FC12 1/2" 5.12 CT 7FC34 3/4" 5.12 CT 7FC100 1" 7.71 CT 7FC114 1-1/4" 14.00 CT 7FC112 1-1/2" 14.00 CT 7FC200 2" 19.70 CT 7FC300 3" 53.20 CT 7FC400 4" 82.41

Part No. Size RETAIL CT 7F18 1/8" $ 1.49 CT 7F14 1/4" 1.49 CT 7F38 3/8" 2.02 CT 7F12 1/2" 3.10 CT 7F34 3/4" 3.77 CT 7F100 1" 5.25 CT 7F114 1-1/4" 9.72 CT 7F112 1-1/2" 11.19 CT 7F200 2" 12.93 CT 7F300 3" 28.94 CT 7F400 4" 61.64

Part No. Size RETAIL CT 7UN18 1/8" $ 10.52 CT 7UN14 1/4" 10.52 CT 7UN38 3/8" 10.79 CT 7UN12 1/2" 11.59 CT 7UN34 3/4" 14.87 CT 7UN100 1" 21.71 CT 7UN114 1-1/4" 35.11 CT 7UN112 1-1/2" 38.46 CT 7UN200 2" 46.50 CT 7UN300 3" 156.45 CT 7UN400 4" 251.92

Stainless Hose Barbs

Stainless Steel Nipples (Low Pressure - 150 PSI)

(LOW PRESSURE - 150 PSI) Male Pipe Threads & Male Hose Barb MPT & Part No. Shank Diameter EV RST-1/4 1/4” EV RST-3/8 3/8” EV RST1 1/2” TK HB075SS 3/4” TK HB100SS 1” TK HB125SS 1-1/4” TK HB150SS 1-1/2” TK HB200SS 2” TK HB300SS 3” King Nipple, No Hex TK 316-A300 3” Hex Style TK HB025/038SS 1/4" M x 3/8" HB TK HB025/050SS 1/4" M x 1/2" HB TK HB038/050SS 3/8” M x 1/2” HB TK HB050/058SS 1/2” M x 5/8” HB TK HB050/075SS 1/2” M x 3/4” HB TK HB075/050SS 3/4” M x 1/2” HB TK HB075/100SS 3/4” M x 1” HB TK HB100/075SS 1” M x 3/4” HB

Material RETAIL 316 S.S. $ 4.02 316 S.S. 4.82 316 S.S. 6.43 316 S.S. 7.10 316 S.S. 10.72 Hex 316 S.S. 14.61 316 S.S. 18.76 316 S.S. 29.61 316 S.S. 68.34 316 S.S. 97.15 316 S.S. 4.02 316 S.S. 4.02 316 S.S. 4.82 316 S.S. 20.77 316 S.S. 7.10 316 S.S. 20.77 316 S.S. 8.17 316 S.S. 29.08

Part No. Size RETAIL CT 7CR14 1/4” $ 7.97 CT 7CR38 3/8” 9.31 CT 7CR12 1/2” 11.06 CT 7CR34 3/4” 14.00 CT 7CR100 1” 26.40 CT 7CR114 1-1/4” 31.62 CT 7CR112 1-1/2” 38.73 CT 7CR200 2” 49.18 CT 7CR300 3” 156.45 CT 7CR400 4” 251.92

(MPT x MPT) 304 - Schedule 40 Pipe Welded

Part No. Size Length RETAIL CT 304-1/8xCL 1/8" Close $ 0.92 CT 304-1/8x2 1/8" 2" 1.23 CT 304-1/8x4 1/8" 4" 2.43 CT 304-1/8x6 1/8" 6" 3.10 CT 304-1/4xCL 1/4" Close 1.09 CT 304-1/4x2 1/4" 2" 1.49 CT 304-1/4x4 1/4" 4" 2.33 CT 304-3/8xCL 3/8" Close 1.62 CT 304-3/8x2 3/8" 2" 1.76 CT 304-1/2xCL 1/2" Close 1.62 CT 304-1/2x2 1/2" 2" 2.18 CT 304-1/2x4 1/2" 4" 3.90 CT 304-3/4xCL 3/4" Close 2.29 CT 304-3/4x2 3/4" 2" 2.69 CT 304-3/4x4 3/4" 4" 4.45 CT 304-3/4x6 3/4" 6" 6.77 CT 304-1xCL 1" Close 2.69

MPT

Part No. Size Length RETAIL CT 304-1x2 1" 2" $ 3.50 CT 304-1x4 1" 4" 5.92 CT 304-1-1/4xCL 1-1/4" Close 3.63 CT 304-1-1/4x4 1-1/4" 4" 7.17 CT 304-1-1/4x6 1-1/4" 6" 10.25 CT 304-1-1/2xCL 1-1/2" Close 4.18 CT 304-1-1/2x4 1-1/2" 4" 8.24 CT 304-1-1/2x6 1-1/2" 6" 11.86 CT 304-2xCL 2" Close 6.32 CT 304-2x4 2" 4" 10.52 CT 304-2x6 2" 6" 15.28 CT 304-3xCL 3" Close 17.29 CT 304-3x4 3" 4" 23.72 CT 304-3x6 3" 6" 30.02 CT 304-4xCL 4" Close 22.65 CT 304-4x4 4" 4" 29.08 CT 304-4x6 4" 6" 40.74

— Other Sizes Available —

IND

DULTMEIER SALES • OMAHA, NE

(800) 228-9666

•

www.dultmeier.com

• DAVENPORT, IA

(800) 553-6975

E0343

Stainless Pipe Fittings - High Pressure

304 Stainless - Rated to 3000 PSI • 316 Stainless - Rated to 4500+ PSI Couplings

90° ST ELLS

Crosses (FPT)

(FPT x FPT)

(MPT x FPT)

Part No. CT SE3000-1/4 CT SE6000-1/4 CT SE3000-3/8 CT SE6000-3/8 CT SE3000-1/2 CT SE6000-1/2 CT SE3000-3/4 CT SE3000-1

Part No. Size PSI RETAIL CT CR3000-1/4 1/4" 3000 $ 8.24 CT CR6000-1/4 1/4” 6600 27.34 CT CR3000-3/8 3/8" 3000 15.01 CT CR6000-3/8 3/8” 5300 44.89 CT CR3000-1/2 1/2” 3000 16.35 CT CR3000-3/4 3/4" 3000 47.17 CT CR3000-1 1” 3000 62.71

90° Elbows

Tees

(FPT x FPT)

Part No. Size PSI RETAIL CT LL3000-1/4 1/4" 3000 $ 11.73 CT LL6000-1/4 1/4” 6600 14.87 CT LL3000-3/8 3/8" 3000 16.48 CT LL6000-3/8 3/8” 5300 20.64 CT LL3000-1/2 1/2" 3000 17.69 CT LL6000-1/2 1/2” 4900 32.43 CT LL3000-3/4 3/4" 3000 25.46 CT LL3000-1 1” 3000 37.39 CT LL3000-1-1/4 1-1/4” 3000 34.04 CT LL3000-1-1/2 1-1/2” 3000 68.34

(MPT x FPT)

3000 PSI

Size 3/8” x 1/4” 3/8” x 1/4” 1/2” x 3/8” 1/2” x 3/8” 3/4” x 1/2” 1” x 3/4” 1-1/4” x 1” 1-1/2” x 1”

PSI RETAIL 3000 $ 3.10 5300 7.44 3000 4.25 4900 9.58 3000 6.26 3000 8.78 3000 14.27 3000 17.82

Stainless Steel Nipples 304 SS - Schedule 80

High Pressure - 3000 PSI (MPT x MPT)

316 SS - Schedule 80 — High Pressure — 3000 - 10,000 PSI As Shown

Part No.

CT 54S20 CT 54S40 CT 54S42 CT 54S43 CT 54S60 CT 54S62 CT 54S64 CT 54S80 CT 54S82 CT 54S83 CT 54S12 CT 54S16

Size

1/8” 1/4" 1/4" 1/4" 3/8" 3/8" 3/8” 1/2" 1/2" 1/2" 3/4” 1”

Length

Close Close 2" 3" Close 2" 4” Close 2" 3" Close Close

2", 3” & 4" Sizes

Max. Pressure

10,000 PSI 8000 PSI 8000 PSI 8000 PSI 7800 PSI 7800 PSI 7800 PSI 7700 PSI 7700 PSI 7700 PSI 7300 PSI 5300 PSI

RETAIL

$ 4.11 4.98 8.38 11.19 6.26 9.31 21.71 10.12 15.95 19.03 17.02 26.26

316 SS - Schedule 80

Close Sizes

316SS may provide better corrosion resistance on certain products. Always check chemical compatibility charts.

No More Rust Problems with Your Fittings!

316SS

(MPT x FPT)

Max. Part No. Pipe Threads PSI RETAIL HH 1404-44SS 1/4" MPT X 1/4" FPT 5000 $ 21.84 HH 1404-46SS 1/4" MPT X 3/8" FPT 5000 27.74 HH 1404-68SS 3/8" MPT X 1/2" FPT 4000 53.06 HH 1404-66SS 3/8" MPT X 3/8" FPT 4000 23.99 HH 1404-88SS 1/2" MPT X 1/2" FPT 3500 30.42 HH 1404-1212SS 3/4" MPT X 3/4" FPT 2250 60.30 HH 1404-1616SS 1" MPT X 1" FPT 2000 71.69

IND

DULTMEIER SALES • OMAHA, NE

(800) 228-9666

Part No. Size Length RETAIL CT 8018CL 1/8" Close $ 2.43 CT 80182 1/8" 2" 4.05 CT 80184 1/8" 4" 8.51 CT 8014CL 1/4" Close 2.69 CT 80142 1/4" 2" 4.05 CT 80144 1/4" 4" 6.90 CT 80146 1/4" 6" 9.72 CT 8038CL 3/8" Close 3.23 CT 80382 3/8" 2" 4.31 CT 80384 3/8" 4" 8.11 CT 80386 3/8" 6" 11.32 CT 8012CL 1/2" Close 4.18 CT 80122 1/2” 2" 5.92 CT 80124 1/2" 4" 10.52 CT 80126 1/2" 6" 14.87 CT 8034CL 3/4" Close 5.65 CT 80342 3/4" 2" 7.30 CT 80344 3/4" 4" 12.53 CT 8010CL 1" Close 7.17 CT 80102 1" 2" 9.72

High Pressure - 3000 PSI (MPT x MPT)

Stainless Hydraulic Adapter Unions D

(MPT)

Part No. Size PSI RETAIL CT PL3000-1/4 1/4" 3000 $ 2.56 CT PL6000-1/4 1/4” 8000 3.77 CT PL3000-3/8 3/8" 3000 3.03 CT PL6000-3/8 3/8” 7800 5.25 CT PL3000-1/2 1/2" 3000 4.11 CT PL6000-1/2 1/2” 7700 9.72 CT PL3000-3/4 3/4" 3000 5.86 CT PL3000-2 2” 3000 27.87

Stainless Steel Hex Nipples

Hex Nipples for ease in plumbing. 316 Stainless Steel high pressure design for added corrosion resistance. MPT x MPT.

Plugs

(FPT x FPT x FPT)

Part No. Size PSI RETAIL CT TT3000-1/4 1/4” 3000 $ 15.01 CT TT6000-1/4 1/4” 6600 17.82 CT TT3000-3/8 3/8" 3000 20.90 CT TT6000-3/8 3/8” 5300 31.76 CT TT3000-1/2 1/2" 3000 23.58 CT TT6000-1/2 1/2” 4900 43.55 CT TT3000-3/4 3/4" 3000 27.20 CT TT3000-1 1” 3000 39.13 CT TT3000-1-1/4 1-1/4” 3000 59.63 CT TT3000-1-1/2 1-1/2” 3000 89.11

Part No. CT RB3000-3/8 CT RB6000-3/8 CT RB3000-1/2 CT RB6000-1/2 CT RB3000-3/4 CT RB3000-1 CT RB3000-1-1/4 CT RB3000-112X1

Bushings

Part No. Size PSI RETAIL CT CC3000-1/4 1/4" 3000 $ 3.77 CT CC6000-1/4 * 1/4” 6600 9.31 CT CC3000-3/8 3/8" 3000 4.31 CT CC6000-3/8 * 3/8” 5300 11.19 CT CC3000-1/2 1/2" 3000 6.53 CT CC6000-1/2 * 1/2” 4900 15.28 CT CC3000-3/4 3/4" 3000 8.51 CT CC3000-1 1” 3000 14.27 CT CC3000-1-1/4 1-1/4” 3000 25.19 * 6000 PSI are Hex Style.

Size PSI RETAIL 1/4" 3000 $ 14.54 1/4” 6600 14.27 3/8" 3000 14.54 3/8” 5300 20.90 1/2" 3000 17.82 1/2” 4900 38.73 3/4" 3000 18.83 1” 3000 38.46

•

www.dultmeier.com

Part No. Size Length RETAIL CT 316-1XCL 1" Close $ 9.31 CT 316-1X2 1" 2” 11.86 CT 316-1X4 1" 4" 21.04 CT 316-1X6 1" 6" 30.69 CT 316-1-1/4XCL 1-1/4" Close 12.80 CT 316-1-1/4X4 1-1/4" 4" 25.86 CT 316-1-1/4X6 1-1/4" 6” 37.39 CT 316-1-1/2XCL 1-1/2" Close 21.51 CT 316-1-1/2X4 1-1/2" 4" 36.85 CT 316-1-1/2X6 1-1/2" 6" 53.60 CT 316-2XCL 2" Close 24.52 CT 316-2X4 2" 4" 41.14 CT 316-2X6 2" 6" 60.03 CT 316-3XCL 3" Close 61.37 CT 316-3X4 3" 4" 85.76 CT 316-3X6 3" 6” 175.21 • DAVENPORT, IA

(800) 553-6975

E0344

Malleable Iron Pipe Fittings - 150 Lb. * NOTE: For Nitrogen, NH3 & Propane Products: Use Stainless Steel or Forged Steel. Malleable Iron Fittings are not Recommended. EXAMPLE HOW TO ORDER: US 676-2 (For 2" Black) or US G676-2 (For 2" Galvanized)

Couplings

45° Elbows US 620 (Black) US G620 (Galv.) *Std. SIZE RETAIL RETAIL Pkg. 1/8" $ 2.16 $ 2.69 100 1/4" 2.16 2.29 80 3/8" 1.89 2.29 150 1/2" 1.62 1.76 100 3/4" 2.16 2.56 60 1" 2.56 2.83 30 1-1/4" 4.31 5.12 20 1-1/2" 5.25 6.19 15 2" 7.71 9.05 12 2-1/2" 20.50 30.02 6 3" 26.26 42.88 5 4" 50.92 67.67 4 6” 161.81 226.46 3 * Std. Package Discount - 10%

US 676 (Black) US G676 (Galv.) *Std. SIZE RETAIL RETAIL Pkg. 1/8" $ 1.14 $ 2.16 70 1/4" 1.14 1.89 120 3/8" 1.62 1.89 120 1/2" 1.35 1.76 120 3/4" 1.62 1.76 75 1" 2.43 3.10 50 1-1/4" 2.96 4.18 16 1-1/2" 4.05 4.98 18 2" 5.65 6.90 12 2-1/2" 14.67 19.97 8 3" 20.10 26.40 12 4" 40.07 54.27 3 6” 88.44 134.67 * Std. Package Discount - 10%

90° Elbows

US 661 (Black) US G661 (Galv.) *Std. SIZE RETAIL RETAIL Pkg. 1/8" $ 3.56 $ 5.65 40 1/4" 3.90 5.39 30 3/8" 4.05 5.39 25 1/2" 4.45 5.79 45 3/4" 5.52 6.90 30 1" 6.59 9.58 15 1-1/4" 10.79 13.47 10 1-1/2" 12.93 21.84 8 2" 21.57 30.95 5 2-1/2" 37.39 58.02 3 3" 53.87 77.05 2 4" 108.54 141.71 2 6” - 202.34 *Std. Package Discount - 10%

90° Street Elbows

US 601 (Black) US G601 (Galv.) *Std. SIZE RETAIL RETAIL Pkg. 1/8" $ 1.49 $ 1.76 100 1/4" 1.17 1.81 120 3/8" 1.35 1.76 90 1/2" 0.92 1.21 100 3/4" 1.49 1.49 35 1" 2.16 2.56 30 1-1/4" 3.23 4.05 20 1-1/2" 4.31 5.25 15 2" 7.17 8.24 8 2-1/2" 15.68 20.10 12 3" 21.98 33.63 8 4" 46.50 57.62 2 6” 165.83 226.46 2 * Std. Package Discount - 10%

Plugs

US 613 (Black) US G613 (Galv.) *Std. SIZE RETAIL RETAIL Pkg. 1/8" $ 2.16 $2.56 100 1/4" 2.16 2.43 200 3/8" 2.16 2.43 120 1/2" 2.16 2.56 90 3/4" 2.56 2.83 35 1" 2.83 3.10 90 1-1/4" 4.31 5.39 50 1-1/2" 5.65 6.59 9 2" 8.64 11.06 8 2-1/2" 21.57 29.08 10 3" 32.70 43.55 6 4" 50.92 64.99 4 6” 121.94 179.23 * Std. Package Discount - 10%

45° Street Elbows

Unions US 645 (Black)

Crosses

US G645 (Galv.) *Std.

Caps

US 622 (Black) US G622 (Galv.) *Std. SIZE RETAIL RETAIL Pkg. 1/8" $3.10 $ 3.63 100 1/4" 2.43 2.96 80 3/8" 2.56 3.50 60 1/2" 2.16 2.69 70 3/4" 3.10 4.31 50 1" 3.77 5.12 40 1-1/4" 6.32 7.71 20 1-1/2" 7.71 9.31 25 2" 12.93 15.14 30 2-1/2” 26.26 36.05 15 3" 39.80 39.80 10 4” 70.35 83.75 6 *Std. Package Discount - 10%

SIZE RETAIL RETAIL Pkg. 1/8" $13.27 $ 7.17 50 1/4" 13.20 7.30 40 3/8" 13.40 5.92 40 1/2" 11.46 5.92 50 3/4" 13.94 7.71 35 1" 17.49 9.18 20 1-1/4" 26.93 11.73 15 1-1/2" 31.76 15.41 10 2" 42.48 22.51 6 2-1/2" 104.52 42.21 4 3" 122.61 61.64 4 4” 110.55 124.62 4 * Std. Package Discount - 10%

US 183 (Black) US G183 (Galv.) Std. SIZE RETAIL RETAIL Pkg. 1/8" $ 0.47 $ 0.20 120 1/4" 0.28 0.34 100 3/8" 0.34 0.67 300 1/2" 1.27 0.87 300 3/4" 0.90 1.42 180 1" 1.49 1.89 120 1-1/4" 1.89 2.83 40 1-1/2" 2.56 3.90 30 2" 4.31 4.58 30 2-1/2" 7.97 9.31 16 3" 11.32 13.07 16 4" 20.10 26.26 6 6” 40.07 49.85 4 Std. Package Discount - 10%

US 675 (Black) US G675 (Galv.) *Std. SIZE RETAIL RETAIL Pkg. 1/8" $ 0.54 $ 1.62 150 1/4" 1.35 1.62 240 3/8" 1.21 1.49 180 1/2" 0.88 1.35 150 3/4" 1.35 1.89 80 1" 1.89 1.89 50 1-1/4" 2.56 2.83 20 1-1/2" 3.10 3.63 18 2" 4.58 5.12 12 2-1/2" 8.64 13.87 40 3" 12.53 16.75 24 4” 25.33 32.43 6 6” 73.03 112.56 4 * Std. Package Discount - 10%

EXAMPLE HOW TO ORDER Reducers & Bushings: US 678-2X1-1/2 (Large Size x Small Size)

Tees SIZE RETAIL RETAIL Pkg. 1/8" $2.16 $ 2.69 75 1/4" 2.16 2.43 75 3/8" 2.16 2.43 45 1/2" 1.21 2.29 60 3/4" 2.29 2.43 35 1" 3.10 3.77 20 1-1/4" 4.98 5.92 14 1-1/2" 6.32 7.57 12 2" 9.98 11.99 8 2-1/2" 21.04 32.16 8 3" 30.28 36.05 6 4" 69.68 82.41 2 6” 192.63 225.12 * Std. Package Discount - 10%

IND

Bushings

Bell Reducers

US 631 (Black) US G631 (Galv.) *Std.

DULTMEIER SALES • OMAHA, NE

US 678 (Black) US G678 (Galv.) *Std. SIZE RETAIL RETAIL Pkg. 1/4" $ 1.62 $ 1.89 50 3/8" 1.62 1.89 100 1/2" 1.49 1.76 75 3/4" 1.62 2.16 90 1" 2.43 2.96 60 1-1/4" 2.96 3.90 30 1-1/2" 3.77 5.25 25 2" 5.39 6.90 12 2-1/2" 13.07 21.31 10 3" 17.02 23.45 6 4" 40.07 56.95 3 6” 99.16 106.53 3 * Std. Package Discount - 10%

(800) 228-9666

•

www.dultmeier.com

US 181 (Black) US G181 (Galv.) *Std. SIZE RETAIL RETAIL Pkg. 1/4" $ 0.86 $ 2.43 100 3/8" 0.75 0.94 200 1/2" 1.07 1.14 300 3/4" 1.62 2.25 150 1" 1.62 2.56 100 1-1/4" 2.83 3.90 60 1-1/2" 3.77 4.85 25 2" 4.85 5.39 30 2-1/2" 8.58 9.05 15 3" 12.66 14.54 12 4" 27.47 25.46 5 6” 44.49 51.86 4 * Std. Package Discount - 10%

• DAVENPORT, IA

(800) 553-6975

E0341

Forged Steel Fittings & Nipples 45° Elbows

90° Elbows

2000-Lb.

US 239 Part No. US 239-1/4 US 239-3/8 US 239-1/2 US 239-3/4 US 239-1 US 239-1-1/4 US 239-1-1/2 US 239-2 US 239-3 US 239-4

RETAIL $ 8.38 8.64 8.98 9.18 13.13 20.10 25.86 38.73 0.00 309.54

Part No. US 240-1/4 US 240-3/8 US 240-1/2 US 240-3/4 US 240-1 US 240-1-1/4 US 240-1-1/2 US 240-2 US 240-3 US 240-4

US 1931 Size 1/4” 3/8" 1/2" 3/4" 1" 1-1/4" 1-1/2" 2" 3" 4"

RETAIL $ 5.79 6.06 5.79 6.39 8.17 16.35 20.03 26.40 104.52 309.54

Part No. US 1931-1/8 US 1931-1/4 US 1931-3/8 US 1931-1/2 US 1931-3/4 US 1931-1 US 1931-1-1/4 US 1931-1-1/2 US 1931-2 US 1931-3

Size 1/8" 1/4” 3/8" 1/2" 3/4" 1" 1-1/4" 1-1/2" 2" 3"

Plugs

Crosses

90° St. Ells

US 600

US 243

US 384

3000-LB.

Part No. CN A1135 US 600-3/8 US 600-1/2 US 600-3/4 US 600-1 US 600-1-1/4 US 600-1-1/2 US 600-2 US 600-3 US 600-4

2000 LB.

Size 1/4" 3/8" 1/2" 3/4" 1" 1-1/4" 1-1/2" 2" 3" 4"

Steel Pipe Nipples

NOTE: DO NOT USE welded seam Pipe Nipples for NH3 or LPG. NH3 & LPG service require the use of SEAMLESS SCHEDULE 80 Nipples.

RETAIL $ 1.07 1.33 1.49 2.56 3.32 5.72 7.71 11.46 48.37 62.31

Part No. US 243-1/4 US 243-3/8 US 243-1/2 US 243-3/4 US 243-1 US 243-1-1/4 US 243-1-1/2 US 243-2 US 243-2-1/2 US 243-3 US 243-4

RETAIL $ 0.00 20.90 20.77 25.39 29.75 50.52 55.61 82.41 253.26 314.90 438.18

US 241

Part No. Size US 386-1/8 1/8 US 386-1/4 1/4” US 386-3/8 3/8" US 386-1/2 1/2" US 386-3/4 3/4" US 386-1 1" US 386-1-1/4 1-1/4" US 386-1-1/2 1-1/2" US 386-2 2" US 386-3 3" US 386-4 4"

RETAIL $ 3.23 3.47 3.35 3.42 3.59 6.32 10.25 12.80 16.08 69.68 164.49

Part No. US 384-1/4 US 384-3/8 US 384-1/2 US 384-3/4 US 384-1 US 384-1-1/4 US 384-1-1/2 US 384-2

SEAMLESS Black

RETAIL $ 7.30 7.91 8.24 7.71 10.18 13.67 22.24 28.41 34.04 141.71 353.76

Reducing Couplings

3000-Lb.

Size 1/4" 3/8" 1/2" 3/4" 1" 1-1/4" 1-1/2" 2"

Part No. Size US 241-1/8 1/8" US 241-1/4 1/4” US 241-3/8 3/8" US 241-1/2 1/2" US 241-3/4 3/4" US 241-1 1" US 241-1-1/4 1-1/4" US 241-1-1/2 1-1/2" US 241-2 2" US 241-3 3" US 241-4 4"

EXAMPLE HOW TO ORDER Bushings & Reducers: US 602-2X1-1/2 (Large Size x Small Size)

Bushings RETAIL $ 13.00 12.73 12.66 17.02 20.64 36.05 40.20 59.50

3000-Lb.

US 602 Size RETAIL 1/4"............. $ 1.96 3/8"............. 1.96 1/2"............. 2.16 3/4"............. 2.63 1"................ 4.17 1-1/4".......... 6.77 1-1/2".......... 7.71 2"................ 11.19 3"................ 49.85 4"................ 105.86

US 387 Size RETAIL 3/8"............... $ 5.39 1/2"............... 6.19 3/4"............... 6.83 1".................. 8.38 1-1/4"............ 14.54 1-1/2"............ 13.60 2".................. 19.70 3”.................. 49.85 4".................. 106.53

10% Discount on Std. Pkg. of 25 Nipples- Not Assorted -

Steel Pipe Nipples-Schedule 80 For NH3 & LPG service Part No. Size Length RETAIL US SML3/4x5....... 3/4" 5" $ 5.44 US SML1xCL........ 1" Close 3.27 US SML1x3.......... 1" 3" 4.85 US SML1x5.......... 1" 5" 7.64 US SML1-1/4xCL.. 1-1/4" Close 4.22 US SML1-1/4x3.... 1-1/4" 3" 6.54 US SML1-1/4x5.... 1-1/4" 5" 9.38 US SML1-1/2xCL.. 1-1/2" Close 4.85 US SML1-1/2x3.... 1-1/2" 3" 7.04 US SML1-1/2x5.... 1-1/2" 5" 10.79 US SML2xCL........ 2" Close 5.99 US SML2x3.......... 2" 3" 7.64 US SML2x5.......... 2" 5" 11.59 US SML3XCL....... 3" Close 20.97 US SML3x3.......... 3" 3" 36.05 US SML3x5.......... 3" 5" 44.89 US SML4xCL........ 4" Close 45.56 US SML4x6.......... 4" 6" 62.31 US SML6xCL........ 6" Close 86.43 US SML6x6.......... 6" 6" 172.53

2000-Lb.

US 386 RETAIL $ 13.27 13.20 13.40 11.46 13.94 17.49 26.93 31.76 42.48 122.61

3000-Lb.

Size 1/4" 3/8” 1/2" 3/4" 1" 1-1/4" 1-1/2" 2" 2-1/2" 3" 4”

Tees

3000-LB.

US 240 Size 1/4" 3/8" 1/2" 3/4" 1" 1-1/4" 1-1/2" 2" 3" 4”

Couplings

Unions

2000-Lb.

GALVANIZED

BLACK

Schedule 40 - Welded Seam LENGTH Size Close 2" 4" 6" 1/8" $0.80 $1.07 $1.76 $2.16 1/4" 0.76 0.84 1.76 2.16 3/8" 0.94 1.07 1.62 2.29 1/2" 0.66 0.80 1.21 1.49 3/4" 0.94 0.87 1.35 1.89 1" 1.21 1.35 1.89 2.43 1-1/4" 1.62 1.76 2.16 3.10 1-1/2" 1.76 2.16 2.69 3.63 2" 2.56 N/A 3.23 4.98 2-1/2" 8.64 N/A 10.25 12.53

Schedule 80 - Welded Seam SIZE 1/8" 1/4" 3/8" 1/2" 3/4" 1" 1-1/4" 1-1/2" 2" 2-1/2" 3" 4" 6"

Example how to order GALVANIZED: US G2x4 (Size x Length)

LENGTH Close 2" 4" 6" 12" $2.14 $2.76 $3.97 $3.90 $11.99 2.36 2.96 5.59 7.30 19.83 2.36 2.83 4.18 8.91 15.01 2.43 2.02 2.95 3.43 9.05 2.49 2.33 3.36 4.85 10.52 3.90 4.05 4.98 6.66 10.12 4.21 4.98 6.19 8.44 17.89 5.36 6.12 7.10 9.51 29.75 8.11 - 9.18 13.40 25.86 18.36 - 22.51 27.74 36.18 24.52 - 33.63 41.27 60.03 39.53 - 40.33 52.39 83.75 Use seamless for 6" nipples.

Example how to order BLACK: US 2x4 (Size x Length)

Steel Hose Fittings Zinc-Plated, MPT x Hose HOSE Part No. MPT BARB DESCRIPTION RETAIL TW S256 1/8" 3/8" Steel Fitting $ 2.29 TW S250 1/4" 1/4" Steel Fitting 1.89 TW S251 1/4" 3/8" Steel Fitting 2.02 TW S253 1/4" 1/2" Steel Fitting 2.83 TW S240 3/8" 1/4" Steel Fitting 2.43 TW S241 3/8" 3/8" Steel Fitting 2.16 TW S243 3/8" 1/2" Steel Fitting 3.10 TW S231 1/2" 3/8" Steel Fitting 3.10 TW S233 1/2" 1/2" Steel Fitting 3.10 TW S234 1/2" 5/8" Steel Fitting 6.43 TW S235 1/2" 3/4" Steel Fitting 5.12 TW S224 3/4" 5/8" Steel Fitting 7.24 TW S225 3/4" 3/4" Steel Fitting 6.66 TW S227 3/4" 1" Steel Fitting 8.64 TW S215 1" 1" Steel Fitting 6.57

IND

DULTMEIER SALES • OMAHA, NE

(800) 228-9666

•

www.dultmeier.com

• DAVENPORT, IA

(800) 553-6975

E0342

Brass Hose & Pipe Fittings (Low Pressure)

Brass Hose Fittings (Pipe Thread)

Brass Hose Fittings

Part No. TW B1818 TW B1814 TW B1414 TW B1438 TW B1418 TW B1412 TW B3814 TW B3838 TW B3812 TW B1238 TW B1212 TW B1258 TW B1234 TW B3412 TW B3434 TW B3410 TW B1010 TW B1034

Female Hose Barbs (Brass FPT x HB)

Part No. Thread Barb RETAIL

AB 32-058 AB 32-059 AB 32-063 AB 32-064 AB 32-060 AB 32-061 AB 32-065

3/8” FPT 3/8” FPT 3/8” FPT 1/2” FPT 1/2” FPT 1/2” FPT 3/4” FPT

1/4" 3/8” 1/2” 1/4” 3/8” 1/2” 3/4”

$ 2.49 2.16 2.76 5.65 3.50 2.83 5.12

32-061

FPT

Male Flare to Male Pipe Connectors Part No.

Male Male Flare Pipe

AB 10-256 1/4" 1/4" $ 1.21 AB 10-257 1/4" 3/8" 1.62 AB U1-6B 3/8" 1/4" 1.76 AB U1-6C 3/8" 3/8" 1.89 AB U1-6D 3/8" 1/2" 2.16 AB U1-8B 1/2" 1/4" 2.49 AB U1-8C 1/2" 3/8" 2.49 AB U1-8D 1/2" 1/2" 2.43

Male Male Flare Pipe

GHT X BARB

TW B201 3/4" TW B203 3/4" TW B204 3/4" TW B205 3/4"

Thread

Barb

RETAIL

1/4" MPT Swivel 1/4" MPT Swivel 3/8" MPT Swivel 1/2" MPT Swivel

1/4" 3/8" 3/8" 1/2"

$ 4.02 2.83 4.98 4.58

$ 3.36 3.10 3.36 3.36

Brass Brass Brass Brass

(Pipe Thread)

Part No. D

AB 129A-1/4 AB 129A-3/8 AB 129A-1/2

Thread

Barb

RETAIL

1/4" MPT 3/8" MPT 1/2" MPT

1/4" 3/8" 1/2"

$ 2.16 2.43 3.97

Brass Stems

Used with B270 or B36B Below

RETAIL

AB 10-229 1/4" 1/4" $ 1.42 AB 10-230 1/4" 3/8" 4.58 AB U3-6B 3/8" 1/4" 1.69 AB U3-6C 3/8" 3/8" 2.49 AB 10-240 1/2" 3/8" 3.03 AB U3-6D 1/2" 1/2" 2.63

Hose Barb RETAIL

3/8" 1/2" 5/8" 3/4"

Brass 90° Hose Barb to Male MPT

RETAIL

Male Flare to Female Pipe Connector

Part No.

Barb

Brass Swivel

RETAIL

TW B261 TW B263 TW B264 TW B265

3/8" 1/2" 5/8" 3/4"

with Flat Seat with Flat Seat with Flat Seat with Flat Seat

$ 2.41 2.41 2.41 2.55

Brass Swivel Nuts

Garden Hose or Pipe Thread

Male Flare to Female Pipe Elbow

(Solid Male x HB)

Brass Male Garden Hose x Hose Barb Part No.

AB 10-287 1/4" 1/4" $ 2.02 AB 10-288 1/4" 3/8" 3.97 AB E1-6B 3/8" 1/4" 3.77 AB E1-6C 3/8" 3/8" 2.89 AB E1-6D 3/8" 1/2" 3.50 AB 10-299 1/2" 3/8" 3.83 AB E1-8D 1/2" 1/2" 4.58

Part No.

Brass Male Hose Barbs

(MPT x HB)

Part No.

Male Male Flare Pipe

RETAIL $ 0.80 0.94 1.01 1.01 0.94 1.35 1.49 1.42 1.69 2.56 2.22 2.36 2.83 3.36 3.90 4.98 7.04 8.91

FL SW290 TW B1438S TW B3838S TW B1212S

Male Flare to Male Pipe Elbow

Part No.

BARB 1/8" 1/4” 1/4” 3/8” 1/8" 1/2” 1/4" 3/8" 1/2” 3/8" 1/2" 5/8” 3/4" 1/2" 3/4" 1" 1" 3/4"

Brass Swivel Hose Barbs D

RETAIL

THREAD 1/8" MPT 1/8” MPT 1/4” MPT 1/4” MPT 1/4" MPT 1/4” MPT 3/8" MPT 3/8" MPT 3/8” MPT 1/2" MPT 1/2" MPT 1/2” MPT 1/2" MPT 3/4" MPT 3/4" MPT 3/4" MPT 1" MPT 1" MPT

Male Female Flare Pipe

Part No.

Swivel Nuts

RETAIL

TW B270 3/4" FGHT Brass $ 2.81 TW B36B 3/4" FPT Brass 4.45 TW W405 Gasket 0.27 HY 3800-35 Gasket with Strainer 0.52

Hex Inlet Fittings

RETAIL

MPT

SA3800B and SA1200B Inlet Fittings must be used with either B270 or B36B swivel nuts listed above. SA3800B is 3/8" MPT. SA1200B is 1/2" MPT. Internal hex allows for ease in garden hose or pipe plumbing requirements.

AB 10-314 1/4" 1/4" $ 3.56 AB 10-315 1/4" 3/8" 6.39 AB 10-333 1/4" 1/2" 9.58 AB 10-319 3/8" 1/4" 2.83 AB 10-320 3/8" 3/8" 3.77 AB E3-6D 3/8" 1/2" 6.59 AB 10-324 1/2" 3/8" 5.92 AB E3-8D 1/2" 1/2" 6.19

SA1200B SA3800B

M75

3/4” x 1/4”

Both fittings are brass construction. M75 Series is stem with hose nut. Part No. MPT RETAIL

SHIPPING “BestWay” shipping may not be the quickest option, but it will help to lower your freight bill. If you select this method of shipping, Dultmeier will calculate the cheapest way to ship your package(s) at the time of shipment.

Gasket

AB M75-3/4X1/4 Stem with Nut 1/4" $ 3.90 AB M75-3/4X3/8 Stem with Nut 3/8" 4.45 AB M75-3/4X1/2 Stem with Nut 1/2” 6.06 EV BMA974 * Stem with Nut 1/2" 5.25 TW SA1200B Stem Only 1/2” 2.08 TW SA3800B Stem Only 3/8” 2.16 TW B270 Nut — 2.81 TW W405 Gasket — 0.27 * Solid (1) Piece, Does Not Swivel

IND

DULTMEIER SALES • OMAHA, NE

(800) 228-9666

•

www.dultmeier.com

• DAVENPORT, IA

(800) 553-6975

E1094

Brass & Bronze Pipe Fittings Large Bronze Fittings Rated to 350 PSI

D D

BRASS FITTINGS

LOW PRESSURE

MEDIUM PRESSURE 1/8” to 1/2” - 1200 PSI • 3/4” - 1000 PSI Rated to 250° F.

Part No. RETAIL AB 101A-1 1” Bronze Tee.................... $ 16.62 AB 44-256 1-1/4" Bronze Tee.............. 20.77 AB 44-257 1-1/2" Bronze Tee.............. 31.22 AB 116A-1 1" Bronze St Ell................. 16.15 AB 44-166 1-1/4" Bronze St Ell........... 28.01 AB 44-167 1-1/2" Bronze St Ell........... 29.35 AB 44-512 1" x 1/2" Bronze Bushing. 6.19 AB 44-513 1" x 3/4" Bronze Bushing. 6.19 AB 44-517 1-1/4" x 3/4" Bronze Bushing. 9.85 AB 44-518 1-1/4" x 1" Bronze Bushing. 10.39 AB 44-522 1-1/2" x 3/4" Bronze Bushing 15.54 AB 44-520 1-1/2" x 1" Bronze Bushing. 12.93

116A

PIPE SIZE

LENGTH 3” 4"

Hex Nipple MxM

121A

Hex Plug

104A

103A

Union FxF

Coupling FxF

101A

122A

90° St. Ell FxM

Brass Pipe Nipples Rated to 350 PSI Part No.

Tee FxFxF

AB B1/8 1/8" $ 0.54 $ 1.21 $ 2.02 $ 3.36 $ 4.31 AB B1/4 1/4" 0.67 1.35 3.77 4.31 6.46 AB B3/8 3/8" 1.07 3.36 4.18 5.25 7.04 AB B1/2 1/2" 1.76 3.90 5.65 6.59 9.85 AB B3/4 3/4" 2.56 5.39 6.77 8.64 12.66 AB B1 1" 6.32 7.17 9.58 — 17.82 AB 40-120 1-1/4” 8.78 — — — — AB 40-140 1-1/2” 10.92 — — — —

B3/4

100A

102A

90° Elbow FxF

Cross FxFxFxF

D D

28019

45° Elbow - F x F

40-140

Brass & Stainless Push-Lok Hose Fittings

119A

120A

Reducer Coupling FxF

123A

Reducer Coupling FxM

Reducing Nipple MxM

for Push-Lock Hose Grip Tight Hose Fittings. Easy to use. Simply push on to seal, no clamps required. For low pressure applications with “Push-lock Style Hose”. Rated to 150 PSI. Sizes are Male or Female NPT thread or hose barb as noted.

Male x Hose Barb

Female x Hose Barb

Hose Barb x Hose Barb

Male Elbow x Hose Barb

Part No. Net Ea. AB 30-201 1/4" MPT x 1/4" Barb, Brass, Solid. $ 1.00 AB 30-201SS 1/4” MPT x 1/4” Barb, 316SS....... 5.90 AB 30-201SW 1/4” MPT x 1/4”, Swivel, Brass.... 3.50 AB 30-202 1/4" MPT x 3/8" Barb, Brass....... 1.25 AB 30-203 3/8" MPT x 1/4" Barb, Brass....... 1.65 AB 30-204 3/8" MPT x 3/8" Barb, Brass, Solid. 1.40 AB 30-204SS 3/8” MPT x 3/8” Barb, 316SS....... 6.40 AB 30-204SW 3/8” MPT x 3/8” Swivel, Brass .... 3.15 AB 30-206 3/8" MPT x 1/2" Barb, Brass....... 1.50 AB 30-205 1/2" MPT x 3/8" Barb, Brass....... 2.65 AB 30-207 1/2" MPT x 1/2" Barb, Brass, Solid. 2.30 AB 30-207SS 1/2” MPT x 1/2” Barb, 316SS....... 14.10 AB 30-207SW 1/2” MPT x 1/2” Swivel, Brass..... 5.85 AB 30-210SS 3/4” MPT x 3/4” Barb, 316SS....... 16.50 AB 30-215 3/4” MPT x 3/4” Barb, Brass........ 3.90 AB 30-216 1” MPT x 1” Barb, Brass............. 13.00 EV RPN66 3/4” MPT x 3/4” Barb, 303SS....... 32.50 EV RPN88 1” MPT x 1” Barb, 303SS............. 42.50 AB 30-300 1/4" Hose x Hose, Brass............ .95 AB 30-301 3/8” Hose x 3/8” Hose, Brass .... 1.15 AB 30-302 1/2” Hose x 1/2” Hose, Brass..... 2.70 AB 30-304 3/4” Hose x 3/4” Hose, Brass...... 3.50 AB 30-306 1” Hose x 1” Hose, Brass ........... 8.70 AB 30-222 1/4" FPT x 1/4" Barb, Brass........ 1.10 AB 30-223 1/4" FPT x 3/8" Barb, Brass........ 1.60 AB 30-225 3/8" FPT x 3/8" Barb, Brass........ 2.00 AB 30-226 3/8" FPT x 1/2" Barb, Brass........ 2.10 AB 30-227 1/2" FPT x 1/2" Barb, Brass........ 2.85 AB 30-305 3/4” FPT x 3/4” Barb, Brass........ 4.75 AB 30-402 1” FPT x 1” Barb, Brass.............. 15.60 AB 30-311 90° Ell, 1/4” MPT x 1/4” Barb, Brass 4.10 AB 30-312 90° Ell, 3/8” MPT x 3/8” Barb, Brass 5.20 AB 30-313 90° Ell, 1/2” MPT x 1/2” Barb, Brass 8.20 AB 30-314 90° Ell, 3/4” MPT x 3/4” Barb, Brass 14.60

Hose I.D.

EV BS848 1"

IND

DULTMEIER SALES • OMAHA, NE

FPT

Brass Bushing MxF

Brass 90° Male Elbow MxM

Branch Tee FxFxM

129A

RETAIL

•

127A

Street Tee MxFxF

Street Ell HB x MPT

1" $ 8.04

(800) 228-9666

169A

110A

131A

– Machined (Female) – Part No.

45° St. Ell MxF

Brass Short Shank Fitting D

124A

PIPE THREAD SIZE Part No. DESCRIPTION 1/8" 1/4" 3/8" 1/2" 3/4" AB 28019 Elbow, 45°....................... — — $ 6.90 — — AB 100A Elbow, 90°....................... — $ 2.96 $ 3.63 $ 9.05 $ 11.46 AB 101A Tee.................................. $ 2.29 3.70 4.98 8.51 13.87 AB 102A Cross.............................. — 4.98 6.06 12.13 18.63 AB 104A Union.............................. — 15.68 12.80 21.71 — AB 103A Coupling, FxF ................ 0.67 0.94 1.55 2.49 4.31 AB 119A Reducer Coupling, FxF.. — 1.21 1.69 3.56 16.62 AB 120A Reducer Adaptor, FxM... — 1.01 1.82 2.69 — AB 116A St. Ell, 90 degree............ 1.62 2.56 3.36 4.65 9.18 AB 121A Hex Plug......................... 0.47 0.80 1.07 2.02 2.83 AB 122A Hex Nipple, MxM............ 0.74 1.01 1.49 2.36 4.58 AB 123A Reducing Nipple, MxM... — 1.01 1.42 2.83 4.11 AB 124A St. Ell, 45 degree............ 1.62 2.43 3.70 6.12 9.72 AB 127A Street Tee....................... 2.36 3.77 4.58 8.91 13.20 AB 129A Ell 90 degree.................. — 2.16 2.43 3.97 — AB 131A Branch Tee, Male............ 2.36 4.11 5.32 10.65 17.55 AB 169A 90° Male Pipe Elbow, MxM.................... 1.96 2.36 3.70 7.44 — AB 110A-BA 1/4 x 1/8 Bushing, MxF — 0.74 — — — AB 110A-CB 3/8 x 1/4 Bushing, MxF — — 1.01 — — AB 110A-DB 1/2 x 1/4 Bushing, MxF — — — 1.89 — AB 110A-DC 1/2 x 3/8 Bushing, MxF — — — 1.49 — AB 110A-EB 3/4 x 1/4 Bushing, MxF — — — — 3.16 AB 110A-EC 3/4 x 3/8 Bushing, MxF — — — — 3.83 AB 110A-ED 3/4 x 1/2 Bushing, MxF — — — — 2.49 AB 110A-FD 1 x 1/2 Bushing, MxF — — — — 6.39 AB 110A-FE 1 x 3/4 Bushing, MxF — — — — 5.32

www.dultmeier.com

• DAVENPORT, IA

(800) 553-6975

E0334

Plated Steel Fittings

Plated Steel Pipe Fittings Zinc-Plated Steel Pipe Fittings can be used for a variety of applications including hydraulics. (Plating helps but rust may occur in water applications). High pressure ratings vary with sizes as shown.

Hex Coupling

Hex Nipple

(FPT X FPT)

Hex Bushing

(MPT x MPT)

(FPT x MPT)

Part No. Size PSI RETAIL HH 50004 1/4" 4000 $ 1.49 HH 50006 3/8” 3000 2.02 HH 50008 1/2” 3000 2.96 HH 5000-12 3/4” 2500 3.36 HH 5000-16 1” 2000 5.39

Part No. Size PSI RETAIL HH 54044 1/4" 4000 $ 1.21 HH 54046 3/8” 3000 1.35 HH 54048 1/2” 3000 1.89 HH 540412 3/4” 2500 3.10 HH 540416 1” 2000 5.79

90 Street Elbow

Hex Plug (MPT)

(MPT x FPT)

Part No. HH 540664 HH 540686 HH 5406128 HH 54061612

Size 3/8” x 1/4" 1/2” x 3/8” 3/4” x 1/2” 1” x 3/4”

PSI RETAIL 3000 $ 2.02 3000 2.16 2500 3.50 2000 5.39

45 Street Elbow (MPT x FPT)

Part No. Size PSI RETAIL HH 5406P4 1/4" 4000 $ 0.94 HH 5406P6 3/8” 3000 0.94 HH 5406P8 1/2” 3000 1.35 HH 5406P12 3/4” 2500 2.69 HH 5406P16 1” 2000 3.90

Part No. Size PSI RETAIL HH 55024 1/4" 4000 $ 2.69 HH 55026 3/8” 3000 3.77 HH 55028 1/2” 3000 5.39 HH 550212 3/4” 2500 6.46 HH 550216 1” 2000 12.13

90 Female Elbow

(FPT x FPT x FPT)

(MPT x MPT)

Part No. Size PSI RETAIL HH 55044 1/4" 4000 $ 2.83 HH 55046 3/8” 3000 3.50 HH 55048 1/2” 3000 5.39 HH 550412 3/4” 2500 7.04 HH 550416 1” 2000 10.65

Part No. Size PSI RETAIL HH 5500-4 1/4" 4000 $ 2.29 HH 5500-6 3/8” 3000 3.10 HH 5500-8 1/2” 3000 4.18 HH 5500-12 3/4” 2500 6.19 HH 5500-16 1” 2000 8.78

Plated Steel Swivel Unions

Part No. Size PSI RETAIL HH 56054 1/4" 4000 $ 4.58 HH 56056 3/8” 3000 5.65 HH 56058 1/2” 3000 6.46 HH 560512 3/4” 2500 9.45 HH 560516 1” 2000 18.89

dultmeier.com

Zinc-Plated Steel Swivel Unions are ideal for use with hydraulic fluids. Can be used with high pressure water, but rust may occur. Male pipe thread x female straight thread. Fittings are not live and do not swivel under pressure. Pressure ratings vary with size.

Part No. Size PSI RETAIL HH 55034 1/4" 4000 $ 2.56 HH 55036 3/8” 3000 2.83 HH 55038 1/2” 3000 5.12 HH 550312 3/4” 2500 5.79 HH 550316 1” 2000 19.70

Tee

90 Male Elbow

(FPT x FPT)

D D

Male Union

Part No. HH 973 HH 952 HH 968 HH 974 HH 954 HH 970 HH 975 HH 976 HH 977 HH 979 HH 980 HH 981 HH 983 HH 984 HH 985 HH 986 HH 987 HH 993 HH 994 HH 995 HH 4973 HH 4974 HH 4975 HH 4976

Female Union

Fitting Pipe Threads Male Union 1/4" MPT x 1/4" FPS Male Union 1/4" MPT x 3/8" FPS Male Union 3/8" MPT x 1/4" FPS Male Union 3/8" MPT x 3/8" FPS Male Union 3/8" MPT x 1/2" FPS Male Union 1/2" MPT x 3/8" FPS Male Union 1/2" MPT x 1/2" FPS Male Union 3/4" MPT x 3/4" FPS Male Union 1" MPT x 1" FPS Male Union 1-1/4" MPT x 1-1/4" FPS Male Union 1-1/2" MPT x 1-1/2" FPS Male Union 2" MPT x 2" FPS Female Union 1/4" FPT x 1/4" FPS Female Union 3/8" FPT x 3/8" FPS Female Union 1/2" FPT x 1/2" FPS Female Union 3/4" FPT x 3/4" FPS Female Union 1" FPT x 1" FPS Female Union 1-1/4" FPT x 1-1/4" FPS Female Union 1-1/2" FPT x 1-1/2" FPS Female Union 2" FPT x 2" FPS 90° Adapter 1/4" MPT x 1/4" FPS 90° Adapter 3/8" MPT x 3/8" FPS 90° Adapter 1/2" MPT x 1/2" FPS 90° Adapter 1” MPT x 1” FPS

DULTMEIER SALES • OMAHA, NE

90° Adapter

PSI 4000 4000 3000 3000 3000 3000 3000 2200 2000 1150 1000 1000 4000 3000 3000 2200 2000 1150 1000 1000 4000 3000 3000 2000

RETAIL $ 1.89 2.29 2.56 3.23 3.23 3.23 3.23 4.85 7.30 17.49 15.54 33.77 2.02 3.23 3.36 4.72 7.04 20.50 17.55 32.56 2.02 3.23 4.58 10.12

(800) 228-9666

• Shop and Order On-Line 24 Hours a Day, 7 Days a Week! • Large Inventories of Over 2.2 Million Total Items! • View Current Pricing! • Web Specials and Bargain Corner! • Know Your Part Numbers? Use the Web Quick Order Page! • Hundreds of Parts List Schematics (and more to come!) • Technical Library packed with information! • See New Items not Shown in Our Printed Catalogs! • Track Your Order Status and History! • Secure Site for Safe On-Line Ordering.

•

www.dultmeier.com

• DAVENPORT, IA

(800) 553-6975

E1210

Fittings & Couplings Series 43 Crimp Fittings

MP Series Power Crimp Fittings — Plated Steel —

— Plated Steel —

Mega-Crimp Fittings for use with 1-wire, 2-wire and thermoplastic hoses. Used with swagers or crimping machines. One piece design. Commonly used for hose repair or new assemblies. Available in solid or swivel styles.

43 Series Plated Steel Crimp Fittings for use with a wide variety of hydraulic hose, like Parker short shell style. 1-Piece construction that works well with Parker dies and crimping machines.

Male MPT Solid Part No. Hose I.D. PA 10143-4-4 1/4” PA 10143-4-6 3/8” PA 10143-6-4 1/4” PA 10143-6-6 3/8” PA 10143-8-8 1/2” PA 10143-12-12 3/4” PA 10143-16-16 1”

Thread 1/4” MPT Solid 1/4” MPT Solid 3/8” MPT Solid 3/8” MPT Solid 1/2” MPT Solid 3/4” MPT Solid 1” MPT Solid

RETAIL $ 5.79 5.79 6.06 6.32 7.57 6.90 24.86

Thread 1/4” MPT Swivel 3/8” MPT Swivel 1/2” MPT Swivel 3/4” MPT Swivel 1” MPT Swivel

RETAIL $ 16.88 4.14 20.77 32.96 46.50

Thread 1/4” FPT Solid 3/8” FPT Solid 1/2” FPT Solid 3/4” FPT Solid

RETAIL $ 9.18 8.64 12.26 16.62

Male MPT Swivel Part No. Hose I.D. PA 11343-4-4 1/4” PA 11343-6-6 3/8” PA 11343-8-8 1/2” PA 11343-12-12 3/4” PA 11343-16-16 1”

Male MPT Solid

Female FPT Solid Part No. Hose I.D. PA 10243-4-4 1/4” PA 10243-6-6 3/8” PA 10243-8-8 1/2” PA 10243-12-12 3/4”

Female FPT Solid

Series 43 Stainless Crimp Fittings — 316SS —

43 Series Stainless Crimp Fittings are for use with a wide variety of high pressure and hydraulic hoses with 1SN (100R1), 2SN (100R2), R16 and R17 ratings. Can be used with crimping machines or swagers.One piece, 316SS construction.All ends are NPT pipe thread but other thread ends are available.Solid and swivel styles as shown. (Note: For use with hoses marked for Series 43 fittings, see hose specifications). HY and BW Series fittings also available upon request.

Female FPT Solid

RR2 Series Reusable Hose Fittings — 316SS —

These 316SS Reusable Fittings are for use with double braid high pressure and hydraulic hoses with SAE100R2 or 2SN (100R2) ratings. Hose x Male NPT solid ends. 2-Piece design allows for hoses to be repaired in the field with a common vise and wrenches.

RR2 Series Reusable Fittings Part No. Hose I.D. TT SSRR2MP44 1/4” TT SSRR2MP66 3/8” TT SSRR2MP88 1/2” TT SSRR2MP1212 3/4” TT SSRR2MP1616 1”

NPT Thread RETAIL 1/4” Male Solid $ 38.73 3/8” Male Solid 45.83 1/2” Male Solid 52.93 3/4” Male Solid 90.45 1” Male Solid 112.56

Two-piece stem and ferrule assemblies. Easy to install and remove. Standard with Solid MPT or Swivel MPT ends. Plated steel fittings are for high pressure wash hoses or hydraulic applications. Pressure ratings vary. OD hose size is critical to a proper fit on all fittings. Plated Construction Hose Size Part No. ID OD GA 4C1T-4RMP GA 6C1T-4RMP GA 6C1T-6RMP GA 6C1T-6RMJ GA 6C1T-6RFJX GA 8C1T-6RMP GA 8C1T-8RFJX GA 8C1T-8RMP GA 12C1T-12RMP GA 4C2AT-4RMP GA 6C2AT-6RMP GA 6C2AT-6RFJX GA 8C2AT-8RMP GA 8C2AT-8RFJX GA 6C1T-6RMPX GA 8C1T-8RMPX GA 12C1T-12RMPX

Brass Construction Hose Size

IND

ID 1/4” 1/4” 3/8” 3/8” 3/8” 1/2” 1/2”

OD .50” .50” .69” .69” .69” .88 .88

THREAD 1/4” 3/8” 1/4” 3/8” 1/2” 3/8” 1/2”

DULTMEIER SALES • OMAHA, NE

Max. PSI 300 PSI 300 PSI 300 PSI 300 PSI 300 PSI 300 PSI 300 PSI

THREAD 1/4" MPT Solid 1/4" MPT Solid 3/8" MPT Solid 3/8” JIC Male 3/8" JIC Female 3/8" MPT Solid 1/2" JIC Female 1/2" MPT Solid 3/4" MPT Solid 1/4" MPT Solid 3/8" MPT Solid 3/8" JIC Female 1/2" MPT Solid 1/2" JIC Female 3/8" Swivel MPT 1/2" Swivel MPT 3/4" Swivel MPT

Max. PSI RETAIL 3000 PSI $ 15.46 3000 PSI 19.83 3000 PSI 13.96 3000 PSi 31.36 3000 PSI 22.31 2000 PSI 38.19 2000 PSI 32.83 2000 PSI 26.67 1200 PSI 43.55 4000 PSI 17.62 4000 PSI 17.66 4000 PSI 25.73 3500 PSI 26.60 3500 PSI 35.38 3000 PSI 27.16 3000 PSI 45.69 1200 PSI 81.07

•

42 Series Plated Steel Reusable Fittings are for use with a wide variety of Parker pressure wash or hydraulic hose as well as others. 2-Piece stem and ferrule assemblies for field installation. Available with solid or swivel MPT ends as shown. Pressures rated to applicable hose sizes and ratings. Check hose specifications for correct fitting series. Part No. Hose I.D. Thread RETAIL PA 20142-4-4 1/4” 1/4” MPT Solid $ 15.01 PA 21342-4-4 1/4” 1/4” MPT Swivel 27.47 PA 20142-4-6 3/8” 1/4” MPT Solid 19.97 PA 20142-6-6 3/8” 3/8” MPT Solid 16.62 PA 21342-6-6 3/8” 3/8” MPT Swivel 30.42 PA 20142-8-8 1/2” 1/2” MPT Solid 21.24 PA 20142-12-12 3/4” 3/4” MPT Solid 38.06 PA 20142-16-16 1” 1” MPT Solid 62.31

RETAIL $ 4.02 5.25 5.23 5.63 8.71 10.79 12.19

(800) 228-9666

.53" .69" .69" .69” .69" .82" .82" .82" 1.10" .58" .73" .73" .86" .86" .69" .82" 1.10"

— Plated Steel —

Two-piece stem and ferrule assemblies.Easy to install and remove. Standard with Solid MPT or Swivel MPT ends. Brass fittings are rated to 300 PSI and are primarily for low pressure liquid or air applications. OD hose size is critical to a proper fit on all fittings.

Part No. AB 183-4084 AB 183-4086 AB 183-6114 AB 183-6116 AB 183-6118 AB 183-8146 AB 183-8148

1/4" 3/8" 3/8" 3/8” 3/8" 1/2" 1/2" 1/2" 3/4" 1/4" 3/8" 3/8" 1/2" 1/2" 3/8" 1/2" 3/4"

Reusable Hose End Couplings

Brass Reusable Couplings D

RETAIL $ 7.97 17.02 15.14 13.60 9.85 9.65 18.16 10.45 17.42 10.39 18.36 12.93 24.39 11.26 9.18 19.43 8.84 18.63 10.99 22.11 17.42 25.33 14.54 22.04 26.67 18.89 37.52 25.73 30.42 29.08

— Plated Steel —

Part No. Hose I.D. NPT Thread RETAIL TT SS43MP44 1/4” 1/4” Male Solid...... $ 23.18 TT SS43FPX44 1/4” 1/4” Female Swivel 32.29 TT SS43MP66 3/8” 3/8” Male Solid...... 26.40 TT SS43FPX66 3/8” 3/8” Female Swivel 40.47 TT SS43MP88 1/2” 1/2” Male Solid...... 31.49 TT SS43FPX88 1/2” 1/2” Female Swivel 45.83 TT SS43MP1212 3/4” 3/4” Male Solid...... 52.53 TT SS43FPX1212 3/4” 3/4” Female Swivel 75.71 TT SS43MP1616 1” 1” Male Solid......... 62.71 TT SS43FPX1616 1” 1” Female Swivel.. 73.03

Male MPT Solid

Part No. Hose I.D. Thread Type GA 4G4MP 1/4” 1/4” MPT Solid............ GA 4G4MPX 1/4” 1/4” MPT Swivel.......... GA 4G4FP 1/4” 1/4” FPT Solid............. GA 4G4FPX 1/4” 1/4” FPT Swivel........... GA 4G4FJX 1/4” 1/4” JIC Female Swivel GA 4G6MP 1/4” 3/8” MPT Solid............ GA 4G6MPX 1/4” 3/8” MPT Swivel.......... GA 6G4MP 3/8” 1/4” MPT Solid............ GA 6G4MPX 3/8” 1/4” MPT Swivel.......... GA 6G6MP 3/8” 3/8” MPT Solid............ GA 6G6MPX 3/8” 3/8” MPT Swivel.......... GA 6G6FP 3/8” 3/8” FPT Solid............. GA 6G6FPX 3/8” 3/8” FPT Swivel........... GA 6G6FJX 3/8” 3/8” JIC Female Swivel GA 6G8MP 3/8” 1/2” MPT Solid............ GA 6G8MPX 3/8” 1/2” MPT Swivel.......... GA 8G6MP 1/2” 3/8” MPT Solid............ GA 8G6MPX 1/2” 3/8” MPT Swivel.......... GA 8G8MP 1/2” 1/2” MPT Solid............ GA 8G8MPX 1/2” 1/2” MPT Swivel.......... GA 8G8FP 1/2” 1/2” FPT Solid............. GA 8G8FPX 1/2” 1/2” FPT Swivel........... GA 8G8FJX 1/2” 1/2” JIC Female Swivel GA 12G8MP 3/4” 1/2” MPT Solid............ GA 12G8MPX 3/4” 1/2” MPT Swivel.......... GA 12G12MP 3/4” 3/4” MPT Solid............ GA 12G12MPX 3/4” 3/4” MPT Swivel.......... GA 12G12FPX 3/4” 3/4” FPT Solid............. GA 16G12MP 1” 3/4” MPT Solid............ GA 16G16MP 1” 1” MPT Solid...............

Reusable Couplings

Series 43 Stainless

www.dultmeier.com

• DAVENPORT, IA

(800) 553-6975

E0491

Quick Couplers

Imported

Straight-Through “Quick-Detach” Couplers and Plugs are available in brass, steel or stainless steel construction. Standard with Buna-N o-rings, (Viton® also available). Available with Male MPT or Female FPT threads. Coupler Sockets Part No.

Size

Designed for use with liquids, hydraulic service, compressed air, gases, water and vacuum. Available in Brass, Stainless Steel or Steel construction. Buna seals are standard (Viton®, Teflon and EPDM are optional). Straight-Through design means there is no positive shutoff after disconnect. (For positive shut-off see Double-Shut couplers below).

Material Max. PSI RETAIL

KH B14F 1/4” FPT Brass 5500 $ 3.44 KH B14M 1/4” MPT Brass 5500 3.46 KH B38F 3/8” FPT Brass 4200 4.58 KH B38M 3/8” MPT Brass 4200 4.65

Female Straight-Through Couplers

B14F KH S14F 1/4” FPT Stainless 7500 KH S14M 1/4” MPT Stainless 7500 KH S38F 3/8” FPT Stainless 6300 KH S38M 3/8” MPT Stainless 6300 10% Discount on 25 or More - Not Assorted

6.63 8.11 8.04 9.31

Part No.

Size

KH 125B 1/4” KH 125V 1/4” KH 250B 3/8” KH 250V 3/8”

Part No.

S14M Material Buna Viton® Buna Viton®

RETAIL $ 0.21 0.60 0.23 0.75

Plug Nipples Part No.

Size

Material Max PSI

RETAIL

KH 14PF 1/4” FPT Steel 5000 $ 0.79 KH 14PM 1/4” MPT Steel 5000 0.79 KH 38PF 3/8” FPT Steel 4200 1.01 KH 38PM 3/8” MPT Steel 4200 0.98

14044 14042

14045 14043 Part No.

14SF

Part No.

Brass Quick Couplers with Molded Insulator Grips. Straight-Through design is compatible with most any straight through nipple plugs on the market. Available in 1/4” and 3/8” sizes and with male or female threads. Grips allow couplers to stay cool to the touch even when used with hot water. Standard with Buna-N seals. Size

Material Max. PSI RETAIL

Double Shut-Off Couplers & Plugs: Spring-loaded valves in each coupling half seal immediately for positive shut-off to prevent loss of fluid or air when the coupling is disconnected. Ideal for water, hydraulics and chemical applications. Buna seal is standard, but other options are available. Standard Features Include: Hardened construction to assure long service life • High flow capacity • High pressure seal design • Captive valve seal assures “bubble tight” poppet sealing • Durable ball locking mechanism for reliable connections • Temperature range is -40° F. to +250° F. • Available in either brass or 303 Stainless steel construction. Part No. Size Material Max.PSI RETAIL KH BH2-60 1/4" FPT Brass 2700 $ 13.07 KH SH2-62 1/4" FPT Stainless 3700 34.30 KH BH3-60 3/8" FPT Brass 2200 19.30 KH SH3-62 3/8" FPT Stainless 3700 48.11 KH BH4-60 1/2" FPT Brass 2200 31.76 KH SH4-62 1/2" FPT Stainless 4200 77.72 D KH BH6-60 3/4" FPT Brass 2000 50.52 KH SH6-62 3/4" FPT Stainless 3000 133.33 KH B8HP36 1” FPT Brass 1500 99.16 KH B10-H41 1-1/4” FPT Brass 1200 274.70

Couplers

DULTMEIER SALES • OMAHA, NE

Female (FPT)

Plugs

(800) 228-9666

Brass 5200 Stainless 7500 Brass 2800 Stainless 6300 Brass 2200 Stainless 3600 Brass 1700 Stainless 3000 Brass 1300

5.6 $ 6.12 5.6 24.12 15 6.66 15 26.20 22 12.60 22 52.93 66 32.70 66 109.88 140 41.14

Male (MPT)

O-Rings

Description

RETAIL

Female Straight-Through Plugs Part No.

Double Shut-Off Style

IND

Couplers

KH 0101 O-Ring, BUNA for 1/8” Couplers.......... $ 0.29 KH 125B O-Ring, BUNA for 1/4” Couplers.......... 0.21 KH 125V O-Ring, VITON® for 1/4” Couplers ...... 0.60 KH 250B O-Ring, BUNA for 3/8” Couplers.......... 0.23 KH 250V O-Ring, VITON® for 3/8” Couplers....... 0.75 KH 114 O-Ring, BUNA for 1/2” Couplers.......... 0.56 KH 114V O-Ring, VITON® for 1/2” Couplers....... 0.74 KH 212 O-Ring, BUNA for 3/4” Couplers.......... 0.29

KH 14044 1/4” FPT Brass 5200 $ 4.85 KH 14045 1/4” MPT Brass 5200 4.85 KH 14042 3/8” FPT Brass 3700 5.92 KH 14043 3/8” MPT Brass 3700 5.92

Part No. Size Material Max.PSI RETAIL KH BH2-61 1/4" FPT Brass 2700 $ 6.77 KH SH2-63 1/4" FPT Stainless 3700 14.14 KH BH3-61 3/8" FPT Brass 2200 9.05 KH SH3-63 3/8" FPT Stainless 3700 23.92 KH BH4-61 1/2" FPT Brass 2200 13.74 KH SH4-63 1/2" FPT Stainless 4200 35.51 KH BH6-61 3/4" FPT Brass 2000 19.03 KH SH6-63 3/4" FPT Stainless 3000 59.36 KH B8KP36 1” FPT Brass 1500 36.72 KH B10-K41 1-1/4” FPT Brass 1200 206.36

$ 4.98 14.67 5.99 24.12 6.53 26.26 11.79 28.54 16.55 38.46 39.80 132.66 83.75 302.84 122.61 454.26

Size Material Max.PSI Max.GPM RETAIL

AA BST2M 1/4" MPT KH LL2S15 1/4" MPT AA BST3M 3/8" MPT KH LL3S20 3/8" MPT AA BST4M 1/2" MPT KH LL4S25 1/2” MPT KH BST6M 3/4” MPT KH LL6S30 3/4” MPT KH 8S35 1” MPT

38PM

Insulated Quick Couplers D

2.7 2.7 5.6 5.6 15 15 22 22 66 66 140 140 184 184 297 297

Male Straight-Through Couplers Part No.

KH 14SF 1/4” FPT Stainless 5000 $ 2.35 KH 14SM 1/4” MPT Stainless 5000 2.14 KH 38SF 3/8” FPT Stainless 4200 3.56 KH 38SM 3/8” MPT Stainless 4200 3.28 10% Discount on 25 or More - Not Assorted

Size Material Max.PSI Max.GPM RETAIL

KH BST1 1/8" FPT Brass 2800 KH SST1 1/8" FPT Stainless 4200 AA BST2 1/4" FPT Brass 5200 KH LL2S16 1/4" FPT Stainless 7500 AA BST3 3/8" FPT Brass 2800 KH LL3S21 3/8" FPT Stainless 6300 AA BST4 1/2" FPT Brass 2200 KH LL4S26 1/2" FPT Stainless 3600 KH BST6 3/4" FPT Brass 1700 KH LL6S31 3/4" FPT Stainless 3000 KH 8S36 1” FPT Brass 1300 KH LL8S36 1” FPT Stainless 2000 KH 10S41 1-1/4” FPT * Brass 1700 KH LL10S41 1-1/4” FPT Stainless 2200 KH 12S46 1-1/2” FPT * Brass 1400 KH LL12S46 1-1/2” FPT Stainless 2500 * Brass Construction with Steel Sleeve.

Replacement O-Rings

Straight Through Style Straight-Through“Quick-Detach”Couplers and Plugs: Smooth, unrestricted bore permits full flow of fluids. (Rated to 250° F).

•

Size Material Max.PSI Max.GPM RETAIL

KH BSTN1 1/8” FPT Brass KH 1T11 1/8” FPT Steel KH LL1T11 1/8” FPT Stainless AA BSTN2 1/4” FPT Brass KH 2T16 1/4” FPT Steel AA 7187 1/4” FPT Stainless AA BSTN3 3/8” FPT Brass KH 3T21 3/8” FPT Steel AA 7206 3/8” FPT Stainless AA BSTN4 1/2” FPT Brass KH 4T26 1/2” FPT Steel KH LL4T26 1/2” FPT Stainless KH BSTN6 3/4” FPT Brass KH 6T31 3/4” FPT Steel KH LL6T31 3/4” FPT Stainless KH B8T36 1” FPT Brass KH 8T36 1” FPT Steel KH LL8T36 1” FPT Stainless KH B10T41 1-1/4” FPT Brass KH 10T41 1-1/4” FPT Steel KH LL10T41 1-1/4” FPT Stainless KH B12T46 1-1/2” FPT Brass KH 12T46 1-1/2” FPT Steel KH LL12T46 1-1/2” FPT Stainless

2800 3400 4200 5200 5500 7500 2800 4200 6300 2200 3500 3600 1700 2100 3000 1300 2000 2000 1700 2700 2200 1400 2200 2500

2.7 2.7 2.7 5.6 5.6 5.6 15 15 15 22 22 22 66 66 66 140 140 140 184 184 184 297 297 297

$ 8.38 10.25 7.10 3.23 1.62 4.58 5.92 2.02 5.39 12.13 11.06 14.87 6.19 9.45 21.71 21.51 30.02 62.71 41.67 51.72 134.00 71.69 69.01 199.33

Plugs

Female (FPT)

Male Straight-Through Plugs Part No.

Size Material Max.PSI Max.GPM RETAIL

KH B1T10 1/8” MPT Brass KH 1T10 1/8” MPT Steel KH LL1T10 1/8” MPT Stainless KH B2T15 1/4” MPT Brass KH 2T15 1/4” MPT Steel KH LL2T15 1/4” MPT Stainless KH B3T20 3/8” MPT Brass KH 3T20 3/8” MPT Steel KH LL3T20 3/8” MPT Stainless KH B4T25 1/2” MPT Brass KH 4T25 1/2” MPT Steel KH LL4T25 1/2” MPT Stainless KH B6T30 3/4” MPT Brass KH 6T30 3/4” MPT Steel KH LL6T30 3/4” MPT Stainless KH B8T35 1” MPT Brass KH 8T35 1” MPT Steel KH LL8T35 1” MPT Stainless

www.dultmeier.com

2800 3400 5500 5200 5500 7500 2800 4200 6300 2200 3500 3600 1700 2100 3000 1300 2000 2000

• DAVENPORT, IA

2.7 2.7 2.7 5.6 5.6 5.6 15 15 15 22 22 22 66 66 66 184 184 184

$ 5.25 14.14 12.80 2.83 1.76 4.31 3.30 1.76 5.39 9.18 6.32 11.86 21.04 14.87 45.56 19.97 34.71 64.32

(800) 553-6975

Plugs D

Male (MPT)

Viton® is a registered trademark of DuPont Performance Elastomers

E0584

Garden Hose Thread/Quick Couplings Polypropylene Garden Hose Thread Fittings & Camlocks D D D

GHMT075F 3/4” Adapter x 3/4” GHT Male Thread

GHFT075A 3/4” Adapter x 3/4” GHT Female Thread

GHFT075M 3/4” Male NPT x 3/4” GHT Female Thread

GHFT075D 3/4” Coupler x 3/4” GHT Female Thread

GHMT075FPT 3/4” Female NPT x 3/4” GHT Male Thread

GHMT075B 3/4” Coupler x 3/4” GHT Male Thread D

Part No.

Description

Provides a simple and quick way to connect and disconnect garden hoses to spigots, sprinklers, garden hose thread nozzles, etc. Constructed of yellow fiberglass reinforced polypropylene for durability and no rust. 150 PSI rating @ 70° F.

These valves are suitable for light duty use. They have Buna Seats and GHT threads.

LA3

Garden Hose Quick Couplings Series 1163 - Garden Hose Threads No More Threading Nozzles! Unvalved design permits maximum flow with minimum pressure drop. Constructed of brass and stainless steel for extra strength and long life. Note: These couplings are designed for low pressure water service only. Do not exceed 200 psi. Brass and Stainless steel construction for Extra Strength/ Long Life

Brass Adapters

Barbs for Swivel Nuts

235

Part No.

Rigid Female

RETAIL

EV BA976 3/4” FGHT x 3/4" FPT $ 4.58

FPT

Part No.

Threaded Male RETAIL

EV BA777 MGHT x MGHT $ 3.23

Part No.

Threaded Male

RETAIL

EV BA73 3/4” MGHT x 3/8" MPT $ 3.10 EV BA74 3/4” MGHT x 1/2” MPT 1.62 EV BA776 3/4” MGHT x 3/4" MPT 3.63

FGHT D

Std. Std.Pkg. Pkg. Discount RETAIL 50 - $ 0.80 25 25% 0.94 25 25% 1.07 25 25% 0.94 25 25% 2.96 25 25% 2.96 50 25% 2.63 50 25% 2.96

MPT

Part No.

EV BMA974 EV BMA976 EV FM7610T

MPT

MGHT

Female GHT x Male MPT

RETAIL

3/4” FGHT x 1/2" MPT 3/4” FGHT x 3/4" MPT 3/4” FGHT x 1" MPT

$ 5.25 3.90 42.88

To Deliver the Best Possible Service to Our Customers, Dultmeier Sales

Thread Pkg. Discount RETAIL 3/4" GHT Swivel Nut 25 25% $ 0.80 3/4" FPT Swivel Nut. 25 25% 1.07 3/4" GHT Blank Cap 50 25% 1.21 3/4" FPT Blank Cap. 50 25% 1.07 Poly Gasket............. 50 25% 0.27

Barbs for Swivel Nuts Std. Std.Pkg.

(800) 228-9666

Strives to Live Up to A Set of Core Values, One of Which is to Be “Customer Focused”

Part No. Barb Pkg. Discount RETAIL TW C1400 1/4" 50 25% $ 0.67 TW C3800 3/8" 50 25% 0.67 TW C1200 1/2" 50 25% 0.67 TW C5800 5/8" 50 25% 0.80 TW C3400 3/4" 25 25% 0.80 TW C3800-90 * 3/8" 50 - 12.60 TW C1200-90 * 1/2" 50 - 12.73 * Use with B3500 Cap for 90° Outlet on Red Ball Monitors. DULTMEIER SALES • OMAHA, NE

RETAIL

FGHT

Swivel Nuts & Blank Caps Std. Std.Pkg.

Gasket

Male GHT x Female FPT

EV BA794 3/4” MGHT x 1/2" FPT $ 2.63 EV BA796 3/4” MGHT x 3/4" FPT 2.96 EV FM1076 3/4” MGHT x 1" FPT 17.55

Nylon Swivel Nuts & Blank Caps • Barbs D

4730001 Washer

– MGHT Thread X Female Pipe –

FPT

Nylon Garden Hose Adapters

Part No. TW B3400 TW B3500 TW N34 TW N35 TW W405

No. 1163-61 Male Half

Part No. RETAIL PA 1163-60 Female Half w/Washer. $ 9.11 PA 1163-61 Male Half...................... 5.36 PA 4730001 Replacement Washer... 1.21

Part No.

Std. Std.Pkg. Part No. MGHT Barb Pkg. Discount RETAIL TW D3438 3/4" 3/8" 25 25% $ 0.94 TW D3412 3/4" 1/2" 25 25% 1.07 TW D3458 3/4" 5/8" 25 25% 0.94 TW D3434 3/4" 3/4" 25 25% 0.94

Swivel Nut

MGHT

Nylon Garden Hose Barbs

Part No. GHT x PIPE EV E3414 3/4"M x 1/4" MPT TW E3438 3/4"M x 3/8" MPT TW E3412 3/4"M x 1/2" MPT TW E3434 3/4"M x 3/4" MPT TW G3412 3/4"M x 1/2" FPT TW G3434 3/4"M x 3/4" FPT TW H34 3/4"F x 3/4" MPT TW J3412 3/4"F x 1/2" FPT

Durable 4 ball locking mechnism for secure connections

Quality, temperature-resistant Nitrile seals for a leak-free long service life.

Part No. RETAIL TW LA3 SINGLE GHT Valve, Plastic................ $ 2.83 SM 235 DOUBLE GHT Valve, Plastic.............. 3.10 SM 65 SINGLE GHT Valve, Zinc Diecast....... 3.77

No. 1163-60 Female Half With Washer

RETAIL

TK GHMT075F 3/4” GHMT x 3/4” Adapter............. $ 4.38 TK GHFT075A 3/4” GHFT x 3/4” Adapter.............. 4.38 TK GHFT075M 3/4” GHFT x 3/4” MPT................... 2.43 TK GHMT075FPT 3/4” GHMT x 3/4” FPT................... 2.43 TK GHFT075D 3/4” GHFT x 3/4” Coupler.............. 9.31 TK GHMT075B 3/4” GHMT x 3/4” Coupler ............ 9.31

Garden Hose Shut-Off Valves

•

www.dultmeier.com

• DAVENPORT, IA

Partnering to meet and exceed customer expectations

(800) 553-6975

E0340

Stainless Weld Fittings • Sight Indicators

Stainless Steel Weld Fittings

Schedule 10 - 304SS

90° Elbow Long Radius

Part No.

RETAIL

Part No.

CT WL90-1SS 1" $ 5.92 CT WL90-114SS 1-1/4" 9.18 CT WL90-112SS 1-1/2" 7.44 CT WL90-2SS 2" 9.18 CT WL90-3SS 3" 18.63 CT WL90-4SS 4" 28.41 CT WL90-6SS 6" 75.71

45° Elbow Long Radius

Part No.

TEE

Part No.

Size

Part No.

REDUCER

Part No.

Size

Part No.

(Eccentric)

Size

Part No.

Size

RETAIL

CT WT-1SS-40 1" $ 17.02 CT WT-112SS-40 1-1/2" 17.02 CT WT-2SS-40 2" 18.36 CT WT-3SS-40 3" 36.72 CT WT-4SS-40 4” 51.19 CT WT-6SS-40 6” 156.45

90° Elbow Long Radius

45° Elbow Long Radius

TEE

RETAIL Part No.

Size

RETAIL

CT WCA-1SS-40 1" $ 11.86 CT WCA-112SS-40 1-1/2” 17.82 CT WCA-2SS-40 2" 12.40 CT WCA-3SS-40 3” 17.02 CT WCA-4SS-40 4” 22.91 CT WCA-6SS-40 6” 49.18

RETAIL Part No.

Size

RETAIL

CT WRED-2X1SS-40 2”x1” $ 14.54 CT WRED-3X2SS-40 3”x2” 18.63 CT WRED-4X2SS-40 4”X2” 25.73 CT WRED-4X3SS-40 4”x3” 20.50 CT WRED-6X4SS-40 6”x4” 51.19

RETAIL

CT WREE-2X1SS 2”x1” $ 43.55 CT WREE-3X2SS 3”x2” 46.90 CT WREE-4X3SS 4”x3” 46.63 CT WREE-6X4SS 6”x4” 101.17

Weld “Stub” Ends

RETAIL

CT WRED-2X1SS 2”x1” $ 9.85 CT WRED-3X2SS 3”x2” 13.74 CT WRED-4X2SS 4”x2” 19.30 CT WRED-4X3SS 4”x3” 14.20 CT WRED-6X4SS 6”x4” 24.92

REDUCER

Size

CT WL45-1SS-40 1” $ 8.38 CT WL45-112SS-40 1-1/2" 9.18 CT WL45-2SS-40 2" 11.59 CT WL45-3SS-40 3" 29.35 CT WL45-4SS-40 4” 37.39 CT WL45-6SS-40 6” 93.80

CT WCA-1SS 1” $ 13.74 CT WCA-114SS 1-1/4” 32.56 CT WCA-112SS 1-1/2" 14.00 CT WCA-2SS 2" 12.66 CT WCA-3SS 3” 15.81 CT WCA-4SS 4” 19.43 CT WCA-6SS 6” 31.89

(Concentric)

RETAIL

CT WT-1SS 1" $ 16.48 CT WT-114SS 1-1/4" 24.92 CT WT-112SS 1-1/2" 15.81 CT WT-2SS 2" 17.55 CT WT-3SS 3" 31.09 CT WT-4SS 4” 45.83 CT WT-6SS 6” 117.25 Part No.

Size

CT WL90-1SS-40 1" $ 6.90 CT WL90-114SS-40 1-1/4" 10.12 CT WL90-112SS-40 1-1/2" 7.71 CT WL90-2SS-40 2" 11.19 CT WL90-3SS-40 3" 28.94 CT WL90-4SS-40 4" 53.20 CT WL90-6SS-40 6" 156.45

CT WL45-1SS 1" $ 7.71 CT WL45-114SS 1-1/4" 11.99 CT WL45-112SS 1-1/2" 7.71 CT WL45-2SS 2" 9.18 CT WL45-3SS 3" 16.08 CT WL45-4SS 4” 24.66 CT WL45-6SS 6” 51.59

CAP

Part No.

Size

Schedule 40 - 304SS

Part No.

Size

RETAIL

CT WREE-2X1SS-40 2”x1” $ 64.05 CT WREE-3X2SS-40 3”x2” CALL CT WREE-4X3SS-40 4”x3” CALL CT WREE-6X4SS-40 6”x4” 110.55

CAP

REDUCER

(Concentric)

REDUCER (Eccentric)

316SS - Schedule 10

RETAIL For use with steel

CT WST-112SSX 1-1/2" $ 14.41 backup rings and CT WST-200SSX 2" 24.92 gaskets; allows for CT WST-300SSX 3" 29.35 connections that break apart easily CT WST-400SSX 4" 33.77 for maintenance, etc CT WST-600SSX 6” 75.71

We now have our Catalogs as well as Parts Schematics online!

Sight Flow Indicators These Tough Acrylic Sight Flow Indicators are designed to fit between two standard 150 lb. ANSI flanges. One inside corner is beveled for use with butterfly valves. For use with gas, diesel, liquid fertilizer and many other products (not for use with NH3 or LPG). Use with standard flange gaskets. Rated to 200 PSI W.P. at 180˚ F. Note: Not for hose ends - will scratch if dragged on the ground. D

Part No. VV SG2 VV SG3 VV SG4 VV SG6 VV SG8

Size Outside (I.D.) Diameter Width RETAIL 2” 6” 1-7/16” $ 205.02 3” 7.5” 1-7/16” 238.52 4” 9” 1-7/16” 281.40 6” 11” 1-7/16” 332.32 8” 13.5” 1-7/16” 436.84

DULTMEIER SALES • OMAHA, NE

(800) 228-9666

www.dultmeier.com

•

www.dultmeier.com

• DAVENPORT, IA

(800) 553-6975

E0345

Pipe • Pipe Supports • Weld Fittings Black Steel Pipe

304 Stainless Steel Pipe

Schedule 40 & Schedule 80

Schedule 10 • Schedule 40

Ideal for Chemical Run Lines. Sch10 pipe requires welded connections and cannot be threaded. Sch40 pipe can be threaded or welded. All sizes are plain end. Sold in 20’ lengths. No Cut Pieces.

T/C Style

Welded and Seamless Black Steel Pipe. Available in threaded and coupled, (TC) or plain end (PE). Welded SCH Pipe is available in Sch40 Grade A53A or Sch80 Grade A53B. Welded pipe is “Not for Use with LP or NH3”. Seamless SML Pipe is available in Sch40 or Sch80 Grade A106B. Rated for use with LP or NH3 for Sch40 if used with weld fittings or SCH80 if used with forged steel thread fittings or weld fittings. Welded and seamless pipe sizes are sold in 20 ft. or 21 ft. lengths only as noted, no cut pieces. (Special make nipples which are threaded both ends are also available). WELDED PIPE Length Std. Per Ft. Part No. I.D. Size Grade Ends Wt. Length RETAIL

US SCH40-1/2TC 1/2” A53A T/C 18 lbs. 21’ US SCH40-3/4TC 3/4” A53A T/C 24 lbs. 21’ US SCH40-1TC 1” A53A T/C 35 lbs. 21’ US SCH40-1-1/4TC 1-1/4” A53A T/C 48 lbs. 21’ US SCH40-1-1/2TC 1-1/2” A53A T/C 57 lbs. 21’ US SCH40-2TC 2” A53A T/C 77 lbs. 21’ US SCH40-1PE 1” A53A PE 35 lbs. 21’ US SCH40-1-1/4PE 1-1/4” A53A PE 48 lbs. 21’ US SCH40-1-1/2PE 1-1/2” A53A PE 57 lbs. 21’ US SCH40-2PE 2” A53A PE 77 lbs. 21’ US SCH40-3PE 3” A53B PE 159 lbs. 21’ US SCH40-4PE 4” A53B PE 226 lbs. 21’ US SCH40-6PE 6” A53B PE 398 lbs. 21’ US SCH80-1-1/4PE 1-1/4” A53A PE 63 lbs. 21’ US SCH80-1-1/2PE 1-1/2” A53A PE 76 lbs. 21’ US SCH80-2PE 2” A53B PE 106 lbs. 21’ US SCH80-3PE 3” A53B PE 215 lbs. 21’ US SCH80-4PE 4” A53B PE 315 lbs. 21’ SEAMLESS PIPE Length Std. Part No.

I.D. Size

US SML40-1-1/4PE 1-1/4" US SML40-1-1/2PE 1-1/2” US SML40-2PE 2" US SML40-3PE 3" US SML80-1PE 1” US SML80-1-1/4PE 1-1/4” US SML80-1-1/2PE 1-1/2” US SML80-2PE 2” US SML80-3PE 3” US SML80-4PE 4”

Grade

A106B A106B A106B A106B A106B A106B A106B A106B A106B A106B

Ends

PE PE PE PE PE PE PE PE PE PE

Wt.

48 lbs. 57 lbs. 77 lbs. 159 lbs. 43 lbs. 60 lbs. 76 lbs. 106 lbs. 215 lbs. 305 lbs.

Length

Part No. US SCH10-304-050 US SCH10-304-075 US SCH10-304-110 US SCH10-304-114 US SCH10-304-115 US SCH10-304-200 US SCH10-304-300 US SCH10-304-400 US SCH10-304-600 US 304SS-1/2 US 304SS-3/4 US 304SS-1 US 304SS-1-1/4 US 304SS-1-1/2 US 304SS-2 US 304SS-3 US 304SS-4 US 304SS-6

Call for Current Pricing

Pipe Length Std. Per Ft. Size Grade Ends Wt. Length RETAIL 1/2” Sch. 10 PE 17 lbs. 20’ 3/4” Sch. 10 PE 23 lbs. 20’ 1” Sch. 10 PE 34 lbs. 20’ 1-1/4” Sch. 10 PE 45 lbs. 20’ 1-1/2” Sch. 10 PE 54 lbs. 20’ 2” Sch. 10 PE 73 lbs. 20’ 3” Sch. 10 PE 151 lbs. 20’ Call 4” Sch. 10 PE 216 lbs. 20’ for 6” Sch. 10 PE 379 lbs. 20’ 1/2” Sch. 40 PE 17 lbs. 20’ Current 3/4” Sch. 40 PE 23 lbs. 20’ Pricing 1” Sch. 40 PE 34 lbs. 20’ 1-1/4” Sch. 40 PE 45 lbs. 20’ 1-1/2” Sch. 40 PE 54 lbs. 20’ 2” Sch. 40 PE 73 lbs. 20’ 3” Sch. 40 PE 151 lbs. 20’ 4” Sch. 40 PE 216 lbs. 20’ 6” Sch. 40 PE 379 lbs. 20’

Carbon Steel Weld Fittings Schedule 40

Per Ft. RETAIL

Part No. Size RETAIL US WL90-1-1/2 1-1/2" $ 6.12

21’ 21’ 21’ Call 21’ for 21’ Current 21’ 21’ Pricing 21’ 21’ 21’

US WL90-2 2" 8.98 US WL90-3 3" 13.40 US WL90-4 4" 24.86 US WL90-5 5" 53.73 US WL90-6 6" 56.28

90° Elbows

Long Radius

Part No.

PVC Pipe

Schedule 80 Full Length

Pipe * Max. Std. Part No. Size Pressure Length RETAIL

KE 1/2-PVC 1/2" KE 3/4-PVC 3/4" KE 1-PVC 1" KE 1-1/4-PVC 1-1/4" KE 1-1/2-PVC 1-1/2" KE 2-PVC 2" KE 3-PVC 3" KE 4-PVC 4" KE 6-PVC 6”

850 20’ $ 0.54 690 20’ 0.94 630 20’ 1.01 520 20’ 1.42 470 20’ 1.55 400 20’ 2.29 370 20’ 4.38 320 20’ 6.15 280 20’ 14.27

45° Elbows

TEES

RETAIL

Pipe Supports

Crosses

PS200EH

DULTMEIER SALES • OMAHA, NE

(800) 228-9666

•

$ 20.50 31.22 43.42 71.69 75.04

Part No.

Size

RETAIL

2" 3" 4" 5" 6"

$ 7.71 9.05 12.73 19.56 21.71

Size

RETAIL

3" x 2" $ 14.54 4" x 2" 21.17 4" x 3" 17.42 5" x 4" 32.29 6" x 4" 36.31 6" x 5" 32.16

Part No.

Size

US WCR-2 2" CALL US WCR-3 3" for US WCR-4 4”1 PRICING

Support piping runs for steel or HDPE. The 12 gauge galvanized channels have mounting holes; 1-5/8" x 1-5/8". 20’ lengths. Plated clamps include nut and bolt. Part No. Pipe Size RETAIL KE PS200EH - Galvanized Channel, 20 ft. $ 93.13 KE B2010 1” 1” Pipe Clamp................ 3.10 KE B2011 1-1/4” 1-1/4” Pipe Clamp.......... 4.58 KE B2012 1-1/2” 1-1/2” Pipe Clamp.......... 2.56 KE B2013 2" 2” Pipe Clamp................ 2.63 KE B2015 3" 3” Pipe Clamp................ 3.90 KE B2017 4" 4” Pipe Clamp................ 4.65 KE B2020 6" 6” Pipe Clamp................ 8.51

RETAIL

2" 3" 4" 5" 6"

US WRED-3X2 US WRED-4X2 US WRED-4X3 US WRED-5X4 US WRED-6X4 US WRED-6X5

2" x 50' Roll XTRU Coat Wrap......... $ 41.14 4" x 100' Roll XTRU Coat Wrap....... 55.61 1 Quart XTRU Coat Primer.............. 45.56

Size

Part No.

Reducers

$ 8.51 10.65 18.63 28.14 35.91

US WT-2 US WT-3 US WT-4 US WT-5 US WT-6 US WCA-2 US WCA-3 US WCA-4 US WCA-5 US WCA-6

CAPS

Steel Pipe Wrap & Primer

DU TAP2 DU TAP4 DU TAPP

2" 3" 4" 5" 6"

Part No.

* Pressure Rating at 73° F. Substantial drop off at higher temperatures.

Protects underground steel pipe from corrosion. (1) Quart Primer covers approximately 23' of 3" pipe or 33' of 1-1/4" pipe. (1) 4" Wrap Roll (12 mil thick) covers approximately 44' of 2" pipe or 31' of 3" pipe. (1) 2" Wrap Roll (35 mil thick) covers approximately 23' of 1-1/4" pipe.Always use primer with wrap. Part No.

Size RETAIL

US WL45-2 US WL45-3 US WL45-4 US WL45-5 US WL45-6

Grey PVC Plastic Pipe is supplied in 20 ft. lengths with plain ends. Heavy-wall construction can be threaded or glued. Maximum temperature is 140° F. (Sold in lengths only, no cut pieces).

Working Pressure Ratings

in PSI for Carbon Steel Butt Weld Fittings, Schedule 40 1" 1-1/2" 2" 3" 4" 5" 6" 1575 1005 900 1095 975 885 840 All Ratings at -20° to +650° F.

www.dultmeier.com

• DAVENPORT, IA

(800) 553-6975

E0349

Metal Hose Assemblies • Expansion Joints

Flexible Metal Hose Assemblies

EPDM Expansion Joints With Carbon Steel Flanges

Flexible Metal Hose Assemblies can be used with most liquids where rigid piping is a problem or when vibration dampening is desired. (Use double braid hoses for LP and NH3 lines larger than 1-1/4”). UL fire rated hoses are for use with gasoline or diesel. See Our NH3 Section for double braid or UL fire rated hose. All assemblies are 304SS corrugated metal hose with optional ends shown below. Special sizes not shown are readily available. Plate flanges are welded to the metal hose section and are fixed. Floating flanges have a collar welded to the metal hose section and the flange section can be rotated for easier bolt alignment.PCM hose is single braid and PCD is double braid (see our NH3 section). Suffix - End Connections (A) Carbon Steel Nipples, MPT (ASS) 304SS Nipples, MPT (B) Carbon Steel Plate Flanges (C) 304SS Plate Flanges (D) Carbon Steel Float x Plate Flanges (DSS) 304SS Float x Plate Flanges (F) Carbon Steel Float x Float Flanges (FSS) 304SS Float x Float Flanges

Prefix Size 8 = 1” 10 = 1-1/4” 12 = 1-1/2” 16 = 2” 24 = 3” 32 = 4” 48 = 6”

EXAMPLE:

54 = 8”

Standard flanges are 150# ANSI Carbon Steel (Stainless Steel is available). Both flanges swivel (float) for easy installation. Custom built to order options available as well. All expansion joints are built to order and non-returnable. MS1 Series • Vacuum Rating: 86% Full Vacuum (26” HG) at 170° F.

24PCM24A

Diameter

• EPDM Standard (Other materials available)

Length End Conn.

(24=3”) PCM (1-Braid) (24”) (A) (MPT)

• Temperature Range: 20° F. to 250° F.

24PCM24A

Overall Working PSI Part No. I.D. Length @ 170° F. RETAIL GP MS1-2E 2” 6” 180 PSI $ 52.93 GP MS1-3E 3” 6” 180 PSI 84.42 GP MS1-4E 4” 6” 180 PSI 113.90 GP MS1-6E 6” 6” 135 PSI 164.49 * Use Control Rods if PSI is at or Exceeds Ratings Above - Call for Pricing.

Note: Many Metal Hoses are Special Order and Not Returnable.

D D

MS2 Series

• Offers Greater Lateral Movement than MS1 Series

Floating Flanges

32PCM24D Plate

(Carbon Steel Std; Stainless Available)

(Carbon Steel Standard; Stainless Available)

Single Braid for Non-Flammable Liquids

Overall Working PSI Part No. I.D. Length @ 170° F. GP MS2-2E 2” 7” 225 PSI CALL GP MS2-3E 3” 7” 225 PSI For GP MS2-4E 4” 9” 225 PSI Pricing GP MS2-6E 6” 9” 225 PSI * Use Control Rods if PSI is at or Exceeds Ratings Above - Call for Pricing.

Single Braid with Carbon Steel Float x Plate Flanges

Description Max.PSI @ 70˚ F. Wt. RETAIL 3” x 12” Floating x 150# CS Flange........ 315 14 lbs. $ 209.04 3” x 24” Floating x 150# CS Flange........ 315 18 lbs. 262.64 4” x 24” Floating x 150# CS Flange........ 230 21 lbs. 332.32 4” x 12” Floating x 150# CS Flange........ 230 16 lbs. 273.36 6” x 24” Floating x 150# CS Flange........ 130 35 lbs. 560.12

Single Braid for Non-Flammable Liquids Single Braid with Schedule 80 MPT Ends

Part No. Description Max.PSI @ 70˚ F. Wt. GP 8PCM24A 1”x24” with Sch. 80 Seamless MPT *... 570 2 lbs. GP 10PCM12A 1-1/4”x12” with Sch. 80 Seamless MPT * 530 2 lbs. GP 10PCM16A 1-1/4”x16” with Sch. 80 Seamless MPT * 530 2 lbs. GP 10PCM24A 1-1/4”x24” with Sch. 80 Seamless MPT * 530 3 lbs. GP 12PCM12A 1-1/2”x12” with Sch. 80 Seamless MPT 470 3 lbs. GP 12PCM24A 1-1/2”x24” with Sch. 80 Seamless MPT 470 4 lbs. GP 16PCM12A 2”x12” with Sch. 80 Seamless MPT...... 515 3 lbs. GP 16PCM18A 2”x18” with Sch. 80 Seamless MPT...... 515 4 lbs. GP 16PCM24A 2”x24” with Sch. 80 Seamless MPT...... 515 5 lbs. GP 24PCM12A 3”x12” with Sch. 80 Seamless MPT...... 315 7 lbs. GP 24PCM18A 3”x18” with Sch. 80 Seamless MPT...... 315 8 lbs. GP 24PCM24A 3”x24” with Sch. 80 Seamless MPT...... 315 9 lbs. GP 32PCM24A 4”x24” with Sch. 80 Seamless MPT...... 230 17 lbs. * 1” & 1-1/4” Sizes are Suitable for NH3 & LPG.

RETAIL $ 87.10 86.43 93.80 111.22 94.47 120.60 106.53 127.30 139.36 209.04 231.82 254.60 290.78

For NH3 and LP Gas,Double Braid Hoses are Required Double Braid with Schedule 80 MPT Ends

Part No. Description Max.PSI @ 70˚ F. Wt. GP 8PCD12A 1” x 12” with Sch. 80 Seamless MPT.......... 900 4 lbs. GP 10PCD24A 1-1/4” x 24” with Sch. 80 Seamless MPT.... 850 6 lbs. GP 12PCD24A 1-1/2” x 24” with Sch. 80 Seamless MPT.... 750 8 lbs. GP 16PCD24A 2” x 24” with Sch. 80 Seamless MPT...... 825 10 lbs. GP 24PCD24A 3” x 24” with Sch. 80 Seamless MPT...... 500 17 lbs. GP 32PCD24A 4” x 24” with Sch. 80 Seamless MPT...... 370 30 lbs.

RETAIL $ 98.49 144.72 121.27 214.40 347.06 391.28

UL Fire Rated Metal Hose for Gasoline & Diesel with Sch 80 MPT Ends

Part No. GP FG150-MM24 GP FG200-MM24

IND

Description Max.PSI @ 70˚ F. Wt. RETAIL 1-1/2” x 24” Metal Hose, MPT....... 150 5 lbs. $ 163.48 2” x 24” Metal Hose, MPT.............. 150 5 lbs. 203.68

DULTMEIER SALES • OMAHA, NE

• EPDM Rated to 20° F. to 230° F. (Other materials available)

• Working Pressure is 225 PSI

(Note: For NH3 and LP Gas,Double Braid Hoses are required) Part No. GP 24PCM12D GP 24PCM24D GP 32PCM24D GP 32PCM12D GP 48PCM24D

• Vacuum Rating: 86% Full Vacuum (26” HG) at 170° F.

(800) 228-9666

•

MRCE Series • Concentric Reducing Expansion Joints Allow Connection of Unequal Pipe Sizes That Share Same Center Line • Vacuum Rating: 86% Full Vacuum (26” HG) at 170° F.

• EPDM Rated to 20° F. to 250° F. • Minimum Burst Pressure is 4:1

Overall Working PSI Part No. I.D. Length @ 170° F. GP MRCE0302-R 3” x 2” 8” 200 PSI GP MRCE0403-R 4” x 3” 8” 200 PSI GP MRCE0604-R 6” x 4” 8” 190 PSI * Use Control Rods if PSI is at or Exceeds Ratings Above

CALL For Pricing

Call for Pricing.

www.dultmeier.com

• DAVENPORT, IA

(800) 553-6975

E1181

Pipe Flanges • Bolts • Gaskets Threaded Flanges

Slip-On Weld Flanges Carbon Steel & Stainless Steel Class 150 - 260 PSI W.P. at 200° F.

Not for NH3/LPG - (Class 300 also available)

Carbon Steel

Stainless Steel

Bolt Wt. Size Lbs. RETAIL 5/8" 5 $ 16.42 5/8" 8 23.05 5/8" 10 22.78 5/8" 13 36.05 3/4" 17 41.41 3/4" 20 49.85

Pipe Flange Bolt Circle Part No. Size Diameter Diameter Holes PF SS100 1" 4-1/4" 3-1/8" 4 PF SS200 2" 6" 4-3/4" 4 PF SS250 2-1/2" 7" 5-1/2" 4 PF SS300 3" 7-1/2" 6" 4 PF SS400 4" 9" 7-1/2" 8 PF SS600 6" 11" 9-1/2" 8

Bolt Wt. Size Lbs. RETAIL 5/8" 4 $ 38.46 5/8" 5 49.98 5/8" 12 74.37 5/8" 15 91.79 3/4" 20 153.77

Weld Neck Flanges Class 150 – 300 Lb. at 200° F. - Not for NH3/LPG

Pipe Flange Bolt Circle Bolt Bolt Wt. Part No. Size Diameter Diameter Holes Size Lbs. RETAIL EV T200-300 2" 6.5" 5" 8 5/8" 7 $ 28.27 EV T300-300 3” 8.25” 6.62” 8 3/4” 13 40.74 EV T400-300 4” 10” 7.88” 8 3/4” 22 62.71 EV T600-300 6” 12.5” 10.62” 12 3/4” 39 119.93

Pipe Flange Bolt Circle Part No. Size Diameter Diameter Holes US BL200 2" 6" 4-3/4" 4 US BL300 3" 7-1/2" 6" 4 US BL400 4" 9" 7-1/2" 8 US BL600 6" 11" 9-1/2" 8

FEATURES: • Glass reinforced for stability, strength & durability • Precision molded solid. • 150 PSI Maximum operating pressure. • Maximum Temperature is 150° F.

Pipe Flange Bolt Part No. Size Dia. Size Holes RETAIL TK AF100 Threaded Flange 1" 4-1/4" 3/4” 4 $ 14.87 TK AF150 Threaded Flange 1-1/2” 5” 3/4” 4 28.54 TK AF200 Threaded Flange 2" 6" 3/4” 4 27.60 TK AF300 Threaded Flange 3" 7-1/2" 3/4” 4 53.20 TK AF400 Threaded Flange 4" 9" 3/4” 8 111.89 TK ABF200 Blind Flange - 6" 3/4” 4 39.80 TK ABF300 Blind Flange - 7-1/2" 3/4” 4 70.35 TK ABF400 Blind Flange - 9 3/4” 8 122.61

– Schedule 80 –

Flange Bolts Part No. Description Grade RETAIL DU B608 5/8" x 3" Plated Bolt with Nut...... 5 $ 1.31 DU B602 5/8" x 3-1/2" Plated Bolt with Nut 5 1.53 DU B612 5/8" X 4" Plated Bolt with Nut...... 5 1.31 DU B603 5/8" x 4-1/2" Plated Bolt with Nut 5 1.53 Bolts & Gaskets DU B621 5/8” x 5” Plated Bolt with Nut..... 5 1.59 Heavy Nut, Coarse DU B604 5/8" x 5-1/2" Plated Bolt with Nut 5 1.80 T h r e a d B o l t s fo r DU B607 5/8" x 6" Plated Bolt with Nut...... 5 2.02 DU B605 5/8" x 7" Plated Bolt with Nut...... 5 2.43 Valves & Flanges are DU B622 5/8” x 7-1/2” Plated Bolt with Nut 2 2.68 available in Zinc-Plated DU B623 3/4” x 3” Plated Bolt with Nut, GR5 5 1.73 or 304 Stainless Steel. DU B609 3/4" x 3-1/2" Plated Bolt with Nut 5 2.10 Plated bolts come with DU B611 3/4" x 4" Plated Bolt with Nut...... 5 2.02 nuts. (Stainless nuts & DU B345 3/4" x 5" Plated Bolt with Nut...... 5 2.84 bolts are separate). DU B601 3/4" x 6" Plated Bolt with Nut...... 5 3.23 DU B606 3/4" x 7" Plated Bolt with Nut...... 5 3.62 DU F233 3/4” x 7-1/2” Plated Bolt with Nut....... 5 8.51 DU F234 3/4” x 8” Plated Bolt with Nut........... 5 4.38 PF FS582 5/8" x 2-1/2" Stainless Bolt only.. - 2.02 PF FS583 5/8" x 3-1/2" Stainless Bolt only.. - 2.49 PF FS584 5/8" x 4-1/2" Stainless Bolt only.. - 2.89 PF FS585 5/8" x 5-1/2" Stainless Bolt only.. - 3.83 PF FS586 5/8" x 6" Stainless Bolt only........ - 3.77 PF FS341 3/4” x 2” Stainless Bolt only....... - 1.84 PF FS342 3/4” x 2-1/2” Stainless Bolt only. - 2.69 PF FS343 3/4” x 3-1/2” Stainless Bolt only. - 2.48 D PF FS344 3/4” x 4” Stainless Bolt only....... - 3.15 PF FS345 3/4" x 5" Stainless Bolt only........ - 5.99 PF FS346 3/4" x 6" Stainless Bolt only........ - 5.32 PF FS347.5 3/4” x 7.5” Stainless Bolt only.... - 6.60 PF FS348 3/4” x 8” Stainless Bolt only....... - 7.00 PF 58NUT 5/8" Stainless Nut only................ - 0.54 PF 34NUT 3/4" Stainless Nut only................ - 0.67 DU W58 5/8" Flat Plated Washer............... - 0.17 DU W75 3/4" Flat Plated Washer............... - 0.27 DU LW58SS 5/8" Stainless Lock Washer........ - 0.40 DU LW75SS 3/4" Stainless Lock Washer........ - 0.47 * Use 4-1/2” bolts for valves and flanges up through 3”. Use 5-1/2” length for 4” valves. Use 6” bolts for 6” & 8” valves. Flange Gaskets, Full Face - Class 150 Bolt Part No. Flange Size Holes RETAIL

Class 150 ANSI

SLIP FLANGES

Pipe Flange Bolt Circle Bolt Wt. Part No. Size Dia. Diameter Holes Size Lbs. RETAIL PL 851-020 2" 6" 4-3/4" 4 5/8" 1 $ 11.93 PL 851-030 3" 7-1/2" 6" 4 5/8" 2 20.17 PL 851-040 4" 9" 7-1/2" 8 5/8" 3 25.39

Non-Asbestos with Buna-N Binder Gasket

Part No.

Pipe Flange Bolt Circle Bolt Wt. Part No. Size Dia. Diameter Holes Size Lbs. RETAIL PL 852-020 2" 6" 4-3/4" 4 5/8" 1 $ 16.88 PL 852-030 3" 7" 6" 4 5/8" 2 38.99 PL 852-040 4" 9" 7-1/2" 8 5/8" 3 73.70 DULTMEIER SALES • OMAHA, NE

EV FG100 Gasket 1" x 4-1/4" EV FG150 Gasket 1-1/2" x 6" EV FG200 Gasket 2" x 6" EV FG250 Gasket 2-1/2" x 7" EV FG300 Gasket 3" x 7-1/2" EV FG400 Gasket 4" x 9" EV FG500 Gasket 5" x 10" EV FG600 Gasket 6" x 11"

4 $ 1.96 4 2.63 4 3.70 4 3.36 4 5.59 8 6.46 8 9.98 8 7.30

Flange* Ring Gaskets - Class 300

THREADED FLANGES

IND

Bolt Wt. Size Lbs. RETAIL 5/8" 8 $ 26.67 3/4” 16 37.79 3/4” 27 59.63 3/4” 50 105.19

Flange Accessories

Class 150 ANSI

Bolt Wt. Size Lbs. RETAIL 5/8" 5 $ 16.48 5/8" 11 33.23 5/8" 15 46.23 3/4" 20 72.36

Class 300 Blind Steel Pipe Flanges for NH3/LPG

Pipe Carbon Bolt Circle Bolt Part No. Size Flng Dia. Diameter Holes US BLH200 2" 6.5" 5" 8 US BLH300 3” 8.25” 6.62” 8 US BLH400 4” 10” 7.88” 8 US BLH600 6” 12.5” 10.62” 12

Polypropylene Threaded & Blind Flanges

PVC Flanges

Class 150 Blind Carbon Steel Pipe Flanges

Carbon Steel Pipe Flange Bolt Circle Bolt Wt. Part No. Size Dia. Diameter Holes Size Lbs. RETAIL US WN-2 2" 6" 4-3/4" 4 5/8" 6 $ 21.44 US WN-3 3" 7-1/2" 6" 4 5/8" 8 28.94 US WN-4 4" 9" 7-1/2" 8 5/8" 15 49.18 US WN-5 5" 10" 8-1/2" 8 3/4" 20 64.99 US WN-6 6" 11" 9-1/2" 8 3/4" 22 53.73 Stainless Steel (304SS) US WNSS-2 2" 6" 4-3/4" 4 5/8" 6 58.02 US WNSS-3 3" 7-1/2" 6" 4 5/8" 8 95.14 US WNSS-4 4" 9" 7-1/2" 8 5/8" 15 131.99 US WNSS-6 6" 11" 9-1/2" 8 3/4" 22 227.80

Blind Pipe Flanges

Carbon Steel

Bolt Wt. Size Lbs. RETAIL 1/2" 5 $ 35.11 5/8" 5 58.69 5/8" 8 79.73 5/8" 9 85.09 5/8" 15 115.91 3/4" 20 207.70

CLASS 300 THREADED Steel Pipe Flanges for NH3/LPG

Stainless Steel

Carbon Steel & S.S.

Pipe Flange Bolt Circle Bolt Wt. Part No. Size Diameter Diameter Holes Size Lbs. RETAIL $ 10.79 EV T150 1-1/2" 6" 4" 4 5/8" 4 EV T200 2” 6” 4-3/4” 4 5/8” 5 16.88 EV T250 2-1/2" 7" 5-1/2" 4 5/8" 8 24.25 EV T300 3" 7-1/2" 6" 4 5/8" 8 26.00 EV T400 4" 9" 7-1/2" 8 5/8" 13 35.78 EV T600 6" 11" 9-1/2" 8 3/4" 19 51.19 EV T800 8” 13-1/2” 11-3/4” 8 3/4” 27 79.73

CLASS 150 THREADED Stainless Steel Flanges (304SS)

STAINLESS STEEL (304SS) Slip Flanges Pipe Flange Bolt Circle Part No. Size Dia. Diameter Holes EV SOR150 1-1/2" 5" 3-7/8" 4 EV SOR200 2" 6" 4-3/4" 4 EV SOR300 3" 7-1/2" 6" 4 EV SOR400 4" 9" 7-1/2" 8 EV SOR600 6" 11" 9-1/2" 8

CLASS 150 THREADED Carbon Steel Flanges

WELD-ON Carbon Steel Slip Flanges Pipe Flange Bolt Circle Part No. Size Dia. Diameter Holes US WSO-2 2" 6" 4-3/4" 4 US WSO-2-1/2 2-1/2" 7" 5-1/2" 4 US WSO-3 3" 7-1/2" 6" 4 US WSO-4 4" 9" 7-1/2" 8 US WSO-5 5" 10" 8-1/2" 8 US WSO-6 6" 11" 9-1/2" 8

(800) 228-9666

EV FGH200 EV FGH300 EV FGH400 EV FGH600

Class 300 Flange Ring Gasket •

www.dultmeier.com

Flange Size Holes RETAIL

Ring Gasket 6.5” Ring Gasket 8.25” Ring Gasket 10” Ring Gasket 12.5”

8 $ 2.29 8 4.52 8 5.65 12 6.32

* Use Ring Gaskets with Raised Face (RF) Flanges. Flat Face Gaskets are also Available - Order EV FGHXXX-300.

• DAVENPORT, IA

(800) 553-6975

E0346

Polyethylene Pipe (HDPE) & Accessories The Ideal Pipe for Chemical & Fertilizer Transfer • Economical • No Rust • Smooth (High Flowrates) • Unaffected by Sunlight • Extremely Tough HDPE is an outstanding choice for chemical & fertilizer transfer. Lightweight, flexible, chemical and abrasion resistant. This product will not rust, rot, corrode or crack like some other pipe products. Resistant to agriculture chemicals and acids. SAVES greatly in LABOR COSTS vs. Welded Steel Pipe. Ask about the many jobs that we have done using this unique product.

Poly pipe and fittings are coupled by a process called Heat Fusion. Heat Fusion is done with a special machine that actually melts the pipe and fittings and bonds them together creating a fused joint stronger than the pipe itself. This design also enables you to easily add new lines or fittings if required in the future. Fusion machines can be rented or purchased separately. High Density Polyethylene Pipe is rated to 140° F. Stocked in 1-1/2" through 6" sizes, (other sizes are available on request). Black with excellent UV resistance — very long life expectancy outdoors! Not for flammable liquids or petroleum base products. Stocked in 20’ lengths. ***Max PSI **Price Part No. Nominal Size *I.D./SDR **Std Length @ 73° F Per Ft. DP DP1000-112 1-1/2" 1.55"- SDR11 500' coils 200 DP DP1000-2 2" 1.94"- SDR11 20' Lengths 200 DP DP1000-3-17 3" 3.09"- SDR17 20' Lengths 125 Call DP DP1000-3 3" 2.86"- SDR11 20' Lengths 200 for DP DP1000-4-17 4" 3.97"- SDR17 20' Lengths 125 Current DP DP1000-4 4" 3.68"- SDR11 20' Lengths 200 Pricing DP DP1000-6 6" 5.85"- SDR17 20' Lengths 125 DP DP1000-6-11 6" 5.42"- SDR11 20' Lengths 200 DP DP1000-8 8" 7.61"- SDR17 20' Lengths 125 * I.D. varies with SDR rating due to wall thickness of pipe. ** Stocked in 20’ lengths. 40' lengths available on special order basis. Shipped direct from factory. *** Maximum working pressure with 2:1 safety factor. Part No. Description Wt. Call DP 14N * Fusion Machine for 1-1/4" to 4" pipe (with 4" Clamp Only)................................................. 85 lbs. for DP 26N ** Fusion Machine for 2” to 6” pipe Current (with 6” Clamp Only)................................................. 85 lbs. DP 28N † Fusion Machine for 2" to 8" pipe Pricing (with 8" Clamp Only)................................................. 6 lbs. DP 207514 1-1/4" Clamp Insert for 14 machine......................... 5 lbs. * No. 14 machine DP 207515 1-1/2" Clamp Insert for 14 machine......................... 5 lbs. may be rented. DP 214201 Screw Set with Driver for 1”, 1-1/4” & 1-1/2” Clamp Inserts... 2 lbs. DP 410007 2" Clamp Insert for 14 machine............................... 9 lbs. ** No. 26 machine DP 410103 3" Clamp Insert for 14 machine............................... 9 lbs. may be rented. DP 809204 2” Clamp Insert for 28 machine............................... 26 lbs. † No. 28 machine DP 809304 3” Clamp Insert for 28 machine............................... 22 lbs. may be rented. DP 809408 4" Clamp Insert for 28 machine............................... 22 lbs. DP 801510 6" Clamp Insert for 28 machine............................... 28 lbs. Call for Daily DP 413702 Cutter blade set for 14 machine, as replacement... 4 lbs. Rates DP A425201 Heater Plate, set of 2............................................... 6 lbs.

Butt Fusion Machines

- for Poly Pipe Model No. 14N Fusion Machine

Electro Fusion Processor

Electro Fusion Couplings

- for Poly Pipe The DP33N is ideal for use on existing systems where overhead, vertical or horizontal lines are inaccessible to the standard butt fusion machines. The machine is light enough to be shipped via UPS. It is equipped with a bar code scanner: by scanning the bar code attached to each fitting, the machine is automatically adjusted for the correct voltages, heating times and ambient temperatures. Use with electro fusion couplings (see right).

Couplings can be used to repair damaged sections of pipe or add to an existing line. The couplings are made of polyethylene with the heating coils molded into the fitting. This design allows direct heating of the interface between the pipe and fittings with an electro fusion machine. They are bar coded and must be scanned to get the proper machine settings. No alignment tools are necessary.

Pipe Part No. Size RETAIL DP FC150 1-1/2” $ 26.53 DP FC200 2" 13.33 DP FC300 3" 25.26 DP FC400 4" 60.70 DP FC600 6" 156.45

DP33N

Specifications: Weight 47 lbs., with transport box is 57 lbs. • Temp range: -4˚F to + 122˚F. AC 95 to 135 Volt • For use with generators; 2 KW is required for 1/2" through 2” fittings, 4 KW for 3" through 20". The DP33N may be rented. Call for Rates.

DULTMEIER SALES • OMAHA, NE

(800) 228-9666

•

www.dultmeier.com

• DAVENPORT, IA

(800) 553-6975

E0331

Polyethylene Pipe Fittings

— For Butt Fusion Welding to HDPE Pipe — Black PE4710 Butt Fusion Fittings are manufactured and tested to meet ASTM D2513, ASTM D3261 and AWWA C906 regulations. They are compatible for heat butt fusion with black HDPE pipe or fittings manufactured from a like resin, including black HDPE pipe shown on adjacent page. SDR11 rated to 200 PSI @ 73° F. Rated to 140° F. Not for flammable liquids or petroleum based products.

Transition Fittings

45° Wyes Stainless MPT Also Available

Part No. Size Fitting Type RETAIL DP Y2 2" 45° Wye, SDR11 .............. $ 116.58 DP Y3 3" 45° Wye, SDR11 .............. 136.35 DP Y4 4" 45° Wye, SDR11 .............. 155.11 DP Y6 6" 45° Wye, SDR11 .............. 335.00 DP Y8 8” 45° Wye, SDR11............... CALL

D Part No. Size Transition Type RETAIL DP TR112 1-1/2" SDR11 Pipe x MPT (Regular Bore)......... $ 26.53 DP TR2FB 2" * SDR11 Pipe x MPT (Full-Bore)............. 31.49 DP TR2SS-316 2” SDR11 Pipe x MPT (Regular Bore Stainless). 41.14 DP TR2FBSS 2” * SDR11 Pipe x MPT (Full-Bore 304SS). 35.78 DP TR2FBSS-316 2” * SDR11 Pipe x MPT (Full-Bore 316SS)..... 43.89 DP TR3FB 3" * SDR11 Pipe x MPT (Full-Bore)............. 55.34 DP TR3FBSS 3” * SDR11 Pipe x MPT (Full-Bore 304SS). 64.99 DP TR4FB 4" * SDR11 Pipe x MPT (Full-Bore)............. 74.37 DP TR4FBSS 4” * SDR11 Pipe x MPT (Full-Bore 304SS). 87.77 DP TR112KN 1-1/2” SDR11 Pipe x King Nipple..................... 46.63 DP TR2KN 2” SDR11 Pipe x King Nipple..................... 70.35 DP TR2KNSS 2” SDR11 Pipe x King Nipple (Stainless) .. 78.39 DP TR3KN 3” SDR11 Pipe x King Nipple..................... 100.50 DP TR4KN 4” SDR11 Pipe x King Nipple..................... 131.32 DP TR6KN 6” SDR11 Pipe x King Nipple..................... 278.72

Flange Adapters

45° Elbows Part No. Size Fitting Type RETAIL

DP 45L2 DP 45L3 DP 45L4 DP 45L6

2" 3" 4" 6"

45° Elbow, SDR11 .. 45° Elbow, SDR11 .. 45° Elbow, SDR11 .. 45° Elbow, SDR11 ..

Caps Also Available.

Use with Back-Up Rings Shown Below

* TRFB fittings feature pipe on inside of male steel end for better corrosion resistance.

80 PSI Working Pressure Rating

Part No. Size Fitting Type RETAIL DP FA2 2" Flange Adapter, SDR11 ........ $ 13.87 DP FA3 3" Flange Adapter, SDR11 ........ 15.28 DP FA4 4" Flange Adapter, SDR11 ........ 24.19 DP FA6 6" Flange Adapter, SDR11 ........ 40.47 DP FA8 8" Flange Adapter, SDR11 ........ 78.39 DP FA10 10" Flange Adapter, SDR11 ........ 105.19 DP FA12 12" Flange Adapter, SDR11 ........ 156.78

$ 6.77 21.71 22.45 56.68

Iron Back-Up Rings

90° Elbows Part No. Size Fitting Type RETAIL

Backup Ring

DP 90L114 1-1/4" 90° Elbow, SDR11 ..... $ 7.24 DP 90L112 1-1/2" 90° Elbow, SDR11 ..... 9.45 DP 90L2 2" 90° Elbow, SDR11 ..... 9.51 DP 90L3 3" 90° Elbow, SDR11 ..... 21.78 DP 90L4 4" 90° Elbow, SDR11 ..... 22.38 DP 90L6 6" 90° Elbow, SDR11 ..... 68.34 DP 90L8 8" 90° Elbow, SDR11 ..... 144.39

Shown with

Coated with Red Oxide Paint 2” - 24” Sizes

Flange Adapter Part No. Size Fitting Type RETAIL DP BR2 2" Iron Backup Ring for FA2........... $ 11.19 DP BR3 3" Iron Backup Ring for FA3 .......... 17.55 DP BR4 4" Iron Backup Ring for FA4 .......... 22.78 DP BR6 6" Iron Backup Ring for FA6 .......... 29.48 DP BR8 8" Iron Backup Ring for FA8 .......... 53.20 DP BR10 10" Iron Backup Ring for FA10 ........ 55.61

Reducers

Part No.

Size

Fitting Type

DP RE2X1-1/2 2"x1-1/2" DP RE3X2 3"x2" DP RE4X2 4"x2" DP RE4X3 4"x3" DP RE6X4 6"x4" DP RE8X6 8”x6” DP RE10X8 10”x8”

Tees

Part No. Size Fitting Type

RETAIL

DP T112 1-1/2" Tee, SDR11 ...... $ 15.61 DP T2 2" Tee, SDR11 ...... 12.46 DP T3 3" Tee, SDR11 ...... 22.85 DP T4 4" Tee, SDR11 ...... 30.42 DP T6 6" Tee, SDR11 ...... 86.43 DP T8 8" Tee, SDR11 ...... 200.33

2" 3" 4" 6" 8"

Part No. DP BR2SS DP BR3SS DP BR4SS DP BR6SS DP BR8SS

Backup Ring RETAIL 2” 304SS for FA2....... $ 52.39 3” 304SS for FA3....... 66.33 4” 304SS for FA4....... 104.52 6” 304SS for FA6....... 152.43 8” 304SS for FA8....... 180.57

Air Purge Fitting

Part No. Size Fitting Type

DP CR2 DP CR3 DP CR4 DP CR6 DP CR8

- Molded In -

80 PSI Working Pressure Rating

Crosses D

304 Stainless Back-Up Rings

RETAIL

Reducer, SDR11 $ 9.31 Reducer, SDR11 13.07 Reducer, SDR11 16.15 Reducer, SDR11 20.17 Reducer, SDR11 47.30 Reducer, SDR11 67.67 Reducer, SDR11 105.19

Part No. DP APF2 DP APF3 DP APF4 DP APF4-1 DP APF6

RETAIL

Cross, SDR11 $ 183.25 Cross, SDR11 209.04 Cross, SDR11 233.16 Cross, SDR11 336.34 Cross, SDR11 CALL

DULTMEIER SALES • OMAHA, NE

(800) 228-9666

•

www.dultmeier.com

Description RETAIL 3/4" SS FPT in 2" Pipe... $ 83.08 3/4" SS FPT in 3" Pipe... 93.80 3/4" SS FPT in 4" Pipe... 93.13 1” SS FPT in 4” Pipe....... 103.85 3/4" SS FPT in 6" Pipe... 98.49

• DAVENPORT, IA

(800) 553-6975

E0332

Pipe Thread Sealer Products

Free All Deep Penetrating Oil

Teflon Tape 155X Teflon Thread Tape is a heavy-duty industrial grade, extra-dense tape which is ideal for sealing all types of threaded connections even under the most difficult service conditions. Temperature range is -400 to +500 degrees F. (1/2" & 1” X 520" Rolls). SA26 Nickel-Coated Teflon Tape is designed specifically for difficult stainless steel and aluminum thread sealing applications. Pure nickel base helps prevent galling and seizing. Resists high temperatures and corrosion. Temperature Range: -450° F to 550° F. Spec.

Free All Spreads Into Rusted & Frozen Parts, Freeing Them Faster & Easier Than Any Other Penetrating Oil Around !

155X

SA26

Eats Rust. Splits Bolts.

Part No. RETAIL CR 155X Teflon Tape - 1/2” x 520” Roll........................... $ 4.11 CR TTH1520 Teflon Tape - 1” x 520” Roll.............................. 8.11 CR SA26 Nickel-Coated Teflon Tape - 1/2”x260” Roll.......... 11.93

Part No.

These products provide protection against seizing, galling, rust and corrosion. Non-hardening, non-dripping. Speeds assembly and facilitates disassembly. Ideal for use on nuts, bolts, screws, bushings, shafts, sleeves, coupling, motors, pumps, etc. Up to 1800° F. All cans include brush applicators. Rectorseal and Gasoila brands as noted. Sold individually or discounted in standard packages.

Part No.

Container * Std. Pkg.

RETAIL

RS 73431 Rectorseal Anti-Sieze 1 Pint 12 $ 35.11 CR CG04 Gasoila Anti-Sieze 1/4 Pint 24 13.40 * Standard Packages Qualify for 10% Discount

DG-5

CR DG-5

Di-Electric Grease 5.3 oz. Tube

S A F - T- L O K ® A n a e r o b i c Adhesive/Sealants are a specialized series of single component, solvent-free compounds that are individually formulated for locking, sealing, retaining and bonding metal parts and assemblies.

T43

T62

Anaerobic Threadlock/Sealer RETAIL Medium Strength, 50 ml. (1.7 oz.)............ $ 45.16 Permanent, 50 ml. (1.7 oz.)...................... 45.29

Part No.

CR T43 CR T62

RETAIL

Thread Sealers

$ 18.09

SERVICE & REPAIRS

Did you know? We can service almost every brand of pump we sell in our catalog.

for Stainless Steel

The best thread sealer for Stainless Steel fittings. Loctite will stop gas and fluid leaks on all metals: Stainless, forged, galvanized, iron, cast, copper and brass. Used for most liquid applications on industrial acids, solvents, chemicals, gases and steam. Resin is Methacrylate Ester. Temperature range is -65° F. to 400° F. Rated to 1,000 PSI; however, laboratory tests on 1/2 NPT fittings have been leak-free to 10,000 PSI. Cure time above 60° F. is 4 hours on 1" fittings – longer on larger diameter fittings. To accelerate the cure time you must use Locquick Primer N764 at low temperatures or larger diameters. Note: Primer not recommended on Stainless.

Call us at 1-800-228-9666 (Omaha, NE) for a quote!

Part No.

GD AD56747 GD AD56765

DULTMEIER SALES • OMAHA, NE

SAF-T-LOK® products provide the user with additional performance characteristics, including not only fluid sealing, but resistance to corrosion or galvanic attack of the mated parts, as well as solvent resistance. T43 allows parts to be disassembled with normal tools, if desired.

SAF-T-LOK ® Di-Electric Grease keeps electrical connections dry, prevents corrosion, stops arcing and locks out moisture.Will not harm rubber and plastic components as will petroleum products. Works to extreme temperatures. Part No.

Anaerobic Threadlockers / Sealers

Stable in the presence of air, these products cure when placed between two mating parts where metal is present and oxygen is excluded. They form a resilient, vibration-proof, polymer shim between the parts. Temperature range is -65° F. to 350° F.

Di-Electric Grease • Keeps Electrical Connections Dry. • Prevents Corrosion. • Stops Arcing. • Locks Out Moisture. • Will Not Harm Rubber or Plastic • Works in Extreme Temperatures.

Aerosol * Std. Pkg. RETAIL

CR 201W FreeAll Penetrating Oil 6 oz. Can 12 $ 8.17 * Standard Packages Qualify for 10% Discount

Anti-Seize Compounds

201W Free-All Oil penetrates rust, scale and corrosion to free parts quickly and easily. Loosens tar, lead, grease, carbon and graphite deposits. Rust eating formula is ideal for most any industrial application. Contains no silicones. Ideal for use on pipe connections, screws, bolts, nuts, clamps and locks. Sold in 6 oz. aerosol cans.

(800) 228-9666

•

www.dultmeier.com

Tube Loctite Sealant RETAIL 50ML Tube - 1.69 oz. $ 35.78 250ML Tube - 8.45 oz. 109.14

• DAVENPORT, IA

(800) 553-6975

E0809

Pipe Thread Sealer Products

Gasoila Thread & Gasket Sealer Model 2J is a general purpose, lead-free, thread and gasket sealer. Non-toxic, gray paste. Readily adheres to iron, stainless steel, aluminum, plastics and rubber compounds. Can be used with diluted acids, solvents, ammonia, dilute alkalis, chlorine, diesel fuel, gasoline, kerosene, jet fuel, LPG, Natural Gas, butane, hydraulic oils, refrigerants and steam. Not for Oxygen. Rated from -100° to +600° F. Pressures to 10,000 PSI liquids and 3,000 PSI gases. UL classified. Sold in 1/4 pint cans with brush applicator.

2J Part No.

CR 2J

Container * Std. Pkg.

RETAIL

No. 5 Off Yellow

Gasoila Teflon Thread Sealer

Part No.

Container * Std. Pkg.

RETAIL

No. 21 Black

Part No.

Product

RS 25551 RS 25431 RS 28651 RS 28541

#5 Yellow #5 Yellow #21 Black #21 Black

Can Size * Std. Pkg.

1/2 Pt. 1 Pt. 1/2 Pt. 1 Pt.

RETAIL

$ 16.62 26.00 18.76 28.94

24 12 24 12

Extra 10% Discount If Ordered In Standard Packs.

Rectorseal Thread Sealant

with Teflon Tough, insoluble, vibration-proof, anaerobic FasSealATS forms a leak-free seal even on miscut threads. This product delivers a high-speed cure on inactive metals such as stainless steel and monel and a super fast cure on conventional materials such as carbon steel and brass. FasSeal-ATS is resistant to petroleum, butane, propane, natural gas, water, steam, refrigerants, chlorine, caustic sodas, acids, oils, gasoline and more. Temperature Ranges: -65° to +400° F. Pressure Ranges: 10,000 PSI, 250 PSIG steam at 400° F. From Seal to Operating Pressure: Carbon and most other steel + 30 minutes. Stainless Steel + 3 hours.

CR AS25

Both products are available in 1/2 pint or 1 pint cans with brush top lids. #5 is an off-yellow color and #21 is black.

Anaerobic Thread Sealant

Part No.

#5 and #21 Multi-Purpose LeadFree Sealants.Soft-set, slow drying compounds which seal, lubricate and protect threaded pipe and fittings. Can be used on galvanized steel, iron, brass, copper, aluminum, stainless, polyethylene, fiberglass and PVC. (Not for ABS or CPVC). Rated to 12,000 PSI liquids and 2,600 PSI gas. Brushable from +20° to +140° F.

Both products can be used with diluted acids, ammonia, diesel fuel, gasoline, 10% gasohol, hydraulic oils, jet fuel, kerosene, LP gas, nitrogen gas, petroleum solvents, compressed air and hot or cold water.

CR SS08 Teflon Thread Sealer 1/2 Pint 24 $ 21.37 * Standard Packages Qualify for 10% Discount

Can Be Used on Galvanized Steel, Iron, Brass, Copper, Aluminum, Stainless, Polyethylene, Fiberglass & PVC.

Thread & Gasket Sealer 1/4 Pint 24 $ 25.46 * Standard Packages Qualify for 10% Discount

Model SS08 is a soft-setting, non-toxic, Teflon sealer paste. Provides a positive seal on threads, joints, fittings, hoses, nozzles, hydraulic fittings, plugs, couplings, etc. Can be used with brass, copper, stainless, CPVC, PVC, nylon, polyethylene and polypropylene. Excellent resistance to solvents, kerosene, diesel, propane, butane, LPG, ammonia, acids, steam, compressed air and gasoline up to 20% blends. Not for Oxygen. Rated from -100° to +600° F.Pressures to 10,000 PSI liquids and 3,000 gases.

Pipe Thread Compounds

#7 Multi-Purpose, Lead-Free Sealant is designed for use with chemicals, concentrated acids, concentrated caustics, oils, diesel, gasoline, 10% gasohol, alcohol, ethylene glycol, ammonia, glycerine, inert gases, jet fuel, kerosene, LP gases, nitrogen, petroleum solvents, compressed air and water. D

Soft-set, medium dry formula is for use on threaded galvanized steel, iron, brass, copper, aluminum and stainless steel. Impervious to freeze damage. Rated to 12,000 PSI liquid and 2,600 PSI gas. Available in 1 pint, brush top cans. Part No.

Product

Can Size * Std. Pkg. RETAIL

RS 17432 #7 Thread Sealant

1 Pt.

$ 64.32

* Extra 10% Discount If Ordered In Standard Packs.

Tru-Blu™ Thread Sealant

Anaerobic Thread Sealant RETAIL 250ML Tube - 8.45 oz................ $ 85.09

We now have our Catalogs as well as Parts Schematics online!

Part No. RS 31780 RS 31551

www.dultmeier.com

Tru-Blu™ Lead-FreeThread Sealant includes PTFE to enhance thread lubrication during assembly and break out. Specially designed for high vibration and thermal expansion. Can be used with lines carrying diluted acids, compressed air, ammonia, diluted caustics, oils, diesel, gasoline, jet fuel, kerosene, natural gas, Freon, solvents, soaps, steam and water. For used on threaded galvanized steel, iron, brass, copper, aluminum, stainless, polyethylene, fiberglass, PVC and CPVC. Brushable from +20° to +140° F. Available in 1-3/4 oz. tube or 1/2 pint with brush lid.

Container 1-3/4 oz. Tube 1/2 Pt. Can

* Std. Pkg. 24 24

RETAIL $ 4.58 15.01

* Extra 10% Discount If Ordered In Standard Packs.

IND

DULTMEIER SALES • OMAHA, NE

(800) 228-9666

•

www.dultmeier.com

• DAVENPORT, IA

(800) 553-6975

E0350

Push Lock Tube Fittings

John Guest Fluid System Products John Guest Speedfit® Tube Fittings provide instant, secure and leak-proof connections for a wide variety of chemicals and liquids handling. Unique collect locking system holds tubing firmly in place without restricting flow. Can be easily disconnected when required. Ideal for use with almost any soft tubing including polyethylene, polypropylene, nylon, copper, brass, etc. Lead free and NSF 51 and 61 rated. (Use SI Superseal fittings for stainless steel tubing). (Three Types of Construction for a Wide Range of Uses.) Gray Acetal with Nitrile O-Ring: Original fitting design. Food grade rated. Can also be used on air lines and inert gases like CO2. Rated to 150 PSI at 68° F. or 100 PSI at 150° F. White Polypropylene with Food Grade EPDM O-Ring: Developed for the water industry but can be used with a variety of chemicals. (Not suitable for compressed air applications, use Gray Acetal for air). Rated to 150 PSI at 70° F. or 60 PSI at 140° F. Black Polypropylene with Food Grade EPDM O-Ring: Ideal for a wide variety of chemicals. U.V. stabilized design is ideal for use with agriculture spraying. (Not suitable for compressed air applications, use Gray Acetal for air). Rated to 150 PSI at 70° F. or 60 PSI at 140° F.

Quantity Discounts:

Secure connections are simple

15% for Purchases in Bags of 10 Not Assorted. 20% on 100 Assorted Fittings in Bags of 10. 30% on 1000 Assorted Fittings in Bags of 10.

Cut the tube square and push past the O-ring to the tube stop Tube is secured in position

Disconnection is just as easy Push collet against body Slide tube out of fitting

(Tube x MPT)

Tube Discount Part No. O.D. MPT Type Pkg/10 RETAIL LM MC1418 1/4" 1/8" Gray 15% $ 1.55 LM MC1414 1/4" 1/4" Gray 15% 1.82 LM MC1438 1/4" 3/8" Gray 15% 2.36 LM MC51614 5/16” 1/4” Gray 15% 2.29 LM MC51638 5/16” 3/8” Gray 15% 3.23 LM MC3814 3/8" 1/4" Gray 15% 2.56 LM MC3838 3/8" 3/8" Gray 15% 2.96 LM MC3812 3/8" 1/2" Gray 15% 4.65 LM MC1238 1/2" 3/8" Gray 15% 4.05 LM MC1212 1/2" 1/2" Gray 15% 4.31 LM PC1418 1/4" 1/8" White 15% 1.76 LM PC1414 1/4" 1/4" White 15% 1.62 LM PC1412 1/4” 1/2” White 15% 3.70 LM PC3814 3/8" 1/4" White 15% 2.56 LM PC3838 3/8" 3/8" White 15% 3.36 LM PC3812 3/8” 1/2” White 15% 5.25 LM PC1238 1/2" 3/8" White 15% 3.77 LM PC1212 1/2" 1/2" White 15% 4.05 LM BC1418 1/4” 1/8” Black 15% 2.02 LM BC1414 1/4” 1/4” Black 15% 1.96 LM BC1438 1/4” 3/8” Black 15% 2.69 LM BC3814 3/8” 1/4” Black 15% 3.36 LM BC3838 3/8” 3/8” Black 15% 2.68 LM BC3812 3/8” 1/2” Black 15% 5.32

(Tube x Tube)

IND

Stem Reducers

Tube

Part No.

Tube Discount O.D. Type Pkg/10 RETAIL 1/4” Gray 15% $ 2.36 1/4” Gray 15% 2.63 3/8” Gray 15% 3.97 1/4” Gray 15% 3.16 3/8” Gray 15% 4.38 1/4” White 15% 2.69 1/4” White 15% 2.96 3/8” White 15% 4.05 1/4” White 15% 3.63 3/8” White 15% 4.11 1/2” White 15% 6.66 1/4” Black 15% 2.69 1/4” Black 15% 3.36 3/8” Black 15% 3.83 1/4” Black 15% 3.63 3/8” Black 15% 3.30

DULTMEIER SALES • OMAHA, NE

Stem Tube Discount O.D. O.D. Type Pkg/10 RETAIL 1/4” 1/4” Gray 15% $ 2.43 3/8” 1/4” Gray 15% 3.90 3/8” 3/8” Gray 15% 4.11 1/2” 1/2” Gray 15% 4.92 1/4” 1/4” White 15% 2.69 3/8” 1/4” White 15% 3.70 3/8” 3/8” White 15% 4.58 1/2” 1/2” White 15% 4.52 1/4” 1/4” Black 15% 2.69 3/8” 1/4” Black 15% 3.16 3/8” 3/8” Black 15% 4.58 1/2” 1/2” Black 15% 5.59

(MPT x Tube)

Part No. LM PE1414 LM PE3814 LM PE3838 LM PE1212 LM PP1414 LM PP3814 LM PP3838 LM PP1212 LM BE1414 LM BE3814 LM BE3838 LM BE1212

Fixed Elbows Part No. MPT LM ELT1814 1/8” LM ELT1414 1/4” LM ELT1438 1/4” LM ELT3814 3/8” LM ELT3838 3/8” LM PLT1814 1/8” LM PLT1414 1/4” LM PLT1438 1/4” LM PLT3814 3/8” LM PLT3838 3/8” LM PLT3812 3/8” LM BLT1814 1/8” LM BLT1414 1/4” LM BLT1438 1/4” LM BLT3814 3/8” LM BLT3838 3/8”

Stem Adapters

Plug In Elbows

Tube Discount Part No. O.D. Tube Type Pkg/10 RETAIL LM ELC14 1/4” 1/4” Gray 15% $ 2.63 LM ELC51614 5/16” 1/4” Gray 15% 4.11 LM ELC3814 3/8” 1/4” Gray 15% 4.45 LM ELC38 3/8” 3/8” Gray 15% 3.83 LM ELC1238 1/2” 3/8” Gray 15% 5.05 LM ELC12 1/2” 1/2” Gray 15% 4.72 LM PLC14 1/4” 1/4” White 15% 3.03 LM PLC38 3/8” 3/8” White 15% 3.77 LM PLC12 1/2” 1/2” White 15% 4.45 LM BLC14 1/4” 1/4” Black 15% 2.96 LM BLC38 3/8” 3/8” Black 15% 4.58 LM BLC12 1/2” 1/2” Black 15% 5.45

Tube Discount O.D. Type Pkg/10 RETAIL 1/4” Gray 15% $ 4.65 1/4” Gray 15% 4.65 3/8” Gray 15% 6.19 3/8” Gray 15% 6.90 1/2” Gray 15% 8.78 1/4” White 15% 4.31 3/8” White 15% 6.12 3/8” White 15% 6.39

Stem Discount Part No. O.D. MPT Type Pkg/10 RETAIL LM MT1418 1/4” 1/8” Gray 15% $ 0.87 LM MT1414 1/4” 1/4” Gray 15% 0.87 LM MT3814 3/8” 1/4” Gray 15% 1.01 LM MT3838 3/8” 3/8” Gray 15% 1.35 LM MT1238 1/2” 3/8” Gray 15% 2.69 LM MT1212 1/2” 1/2” Gray 15% 2.16 LM PT1418 1/4” 1/8” White 15% 0.94 LM PT1414 1/4” 1/4” White 15% 0.94 LM PT3814 3/8” 1/4” White 15% 1.14 LM PT3838 3/8” 3/8” White 15% 1.49 LM PT1238 1/2” 3/8” White 15% 2.36 LM PT1212 1/2” 1/2” White 15% 1.96 LM BT1418 1/4” 1/8” Black 15% 0.94 LM BT1414 1/4” 1/4” Black 15% 1.07 LM BT3838 3/8” 3/8” Black 15% 1.55

Union Elbows

(MPT x Tube)

Part No. MPT LM ELS1814 1/8” LM ELS1414 1/4” LM ELS1438 1/4” LM ELS3838 3/8” LM ELS3812 3/8” LM PLS1414 1/4” LM PLS1438 1/4” LM PLS3838 3/8”

Male Connectors

Swivel Elbows

(800) 228-9666

•

Stem Discount O.D. Tube Type Pkg/10 RETAIL

LM RE51614 5/16” 1/4” Gray 15% LM RE3814 3/8” 1/4” Gray 15% LM RE1238 1/2” 3/8” Gray 15% LM WE3814 3/8” 1/4” White | LM WE1238 1/2” 3/8” White |

$ 2.76 2.56 4.85 2.89 5.65

To Tube Fitting

Tube Stem to Hose Elbow

To Hose

To Tube Fitting

www.dultmeier.com

Part No.

Stem Hose Discount O.D. Barb Type Pkg/10 RETAIL

LM TL1414 1/4” 1/4” Gray 15% LM TL3814 3/8” 1/4” Gray 15%

• DAVENPORT, IA

(800) 553-6975

$ 2.43 2.96

E0355

Super Speedfit Plumbing Fittings

LARGE QUANTITY DISCOUNTS: LESS 15% For Purchases in Bags of 10 Not Assorted - 20% On 100 Assorted Fittings in Bags of 10 - 30% on 1000 Assorted Fittings in Bags of 10.

Stem Tube X Hose Stem Part No.

Stem O.D.

LM TH1414 1/4” 1/4” Gray LM TH3814 3/8” 1/4” Gray LM TH3838 3/8” 3/8” Gray LM TH3812 3/8” 1/2” Gray LM TH1238 1/2” 3/8” Gray LM TH1212 1/2” 1/2” Gray LM PH3838 3/8” 3/8” White LM PH3812 3/8” 1/2” White LM PH1238 1/2” 3/8” White LM PH1212 1/2” 1/2” White

15% 15% 15% 15% 15% 15% 15% 15% 15% 15%

$ 1.82 2.63 2.76 3.83 2.96 3.97 2.69 3.63 2.89 3.56

Part No.

LM TCT1814 1/8” 1/4” Gray LM TCT1414 1/4” 1/4” Gray LM TCT1438 1/4” 3/8” Gray LM TCT3838 3/8” 3/8” Gray LM TCT3812 3/8” 1/2” Gray LM TCT1212 1/2” 1/2” Gray LM PP100822W 1/4” 1/4” White LM PP101222W 1/4” 3/8” White LM PP101223W 3/8” 3/8” White

To Tube Fitting

Stem Size

Stem Enlarger

Discount Type Pkg/10

Part No. RETAIL

$ 0.67 1.35 1.96

To Tube Fitting

Dead End

Tube Discount O.D. Type Pkg/10

LM ES14 1/4" Gray 15% LM ES38 3/8" Gray 15% LM WS14 1/4” White 15%

RETAIL

15% 15% 15% 15% 15% 15% 15% 15% 15% 15% 15% 15% 15% 15% 15%

Branch

Tube Discount Part No. O.D. Type Pkg/10 LM DV14 1/4” Gray 15% LM DV38 3/8” Gray 15% LM DV12 1/2” Gray 15% LM BV14 1/4” Black 15%

D D

$ 2.36 3.16 3.03 3.16 3.16 4.31 3.63 2.22 3.56 3.43 2.56 2.89 3.63 2.89 4.92

End

$ 5.05 6.53 5.45

2-Way Dividers

$ 1.55 2.36 2.83

Tube Tube Discount O.D. O.D. Type Pkg/10 RETAIL

LM UC14 1/4” 1/4” Gray LM UC51614 5/16” 1/4” Gray LM UC516 5/16” 5/16” Gray LM UC38 3/8” 3/8” Gray LM UC3814 3/8” 1/4” Gray LM UC1238 1/2” 3/8” Gray LM UC12 1/2” 1/2” Gray LM PC14 1/4” 1/4” White LM PC38 3/8” 3/8” White LM PC12 1/2” 1/2” White LM BC14 1/4” 1/4” Black LM BC516 5/16” 5/16” Black LM BUC3814 3/8” 1/4” Black LM BC38 3/8” 3/8” Black LM BUC1238 1/2” 3/8” Black

$ 3.36 4.18 5.05 3.83 3.83 4.72 3.70 3.83

Tube Branch Discount O.D. End Type Pkg/10 RETAIL

LM RT1438W 1/4” 3/8” White 15% LM RT3814 3/8” 1/4” Gray 15% LM RT1238 1/2” 3/8” Gray 15%

Union Connectors Part No.

RETAIL

15% 15% 15% 15% 15% 15% 15% 15%

End Part No.

End Caps Part No.

Shown with MT or PT Stem Adapter Included

Reducing Tees

Stem Tube Discount Part No. O.D. O.D. Type Pkg/10 RETAIL LM SN3812 3/8" 1/2" Gray 15% $ 3.83

Tube Discount O.D. Type Pkg/10

LM TC14 1/4” Gray LM TC38 3/8” Gray LM TC12 1/2” Gray LM TP14 1/4” White LM TP38 3/8” White LM TP12 1/2” White LM BP14 1/4” Black LM BP38 3/8” Black

Tube

15% $ 5.52 15% 5.52 15% 6.66 15% 7.04 15% 9.18 15% 9.18 15% 5.03 15% 6.12 15% 6.19

Union Tees

LM PL14 1/4” Gray 15% LM PL38 3/8” Gray 15% LM PL12 1/2” Gray 15%

Discount Part No. MPT Tube Type Pkg/10 RETAIL

Stem Plugs

To Tube Fitting

Dead End

Swivel Branch Tees

To Hose

Hose Discount Barb Type Pkg/10 RETAIL

3-Way Reducer Dividers

RETAIL $ 3.77 4.25 6.97 5.45

Large Tube Small Tube

(1) (3) Discount Part No. O.D. Outlet Type Pkg/10 RETAIL

LM TD38 3/8” 1/4” White 15% LM TD12 1/2” 3/8” Gray 15%

$ 5.79 9.58

Tube #2

Tube #1

Female Connectors

Unequal Divider

Tube #2

Discount Part No. Tube FPT Type Pkg/10 RETAIL D

LM FC1414 1/4” 1/4” Gray LM FC3814 3/8” 1/4” Gray LM FC1414W 1/4” 1/4” White LM FC3814W 3/8” 1/4” White LM FC3838W 3/8” 3/8” White LM FC1418B 1/4” 1/8" Black LM FC1414B 1/4” 1/4” Black

15% $ 3.70 15% 4.25 15% 5.99 15% 6.26 15% 8.24 15% 6.66 15% 6.06

Part No.

LM UD3814 3/8” 1/4” White 15%

Tube Discount O.D. Type Pkg/10

LM UB12 1/2” Gray 15% LM UB38 3/8” Gray 15%

IND

RETAIL

$ 12.53 10.79

DULTMEIER SALES • OMAHA, NE

John Guest Service Kits

(800) 228-9666

$ 4.45

A great way to have the most common push-lock fittings readily available. Assorted pieces of male connectors, tees, elbows, unions and others in 1/4” and 3/8” tube x NPT sizes. Black or white polypropylene fittings for added chemical resistance. Sturdy compartmentalized case for ease of storage and transportation. (Poly fittings are for water and chemical applications, but are not suitable for compressed air. Acetal fittings must be used for air).

U-Bend Part No.

(1) Tube (2) Tube Discount O.D. O.D. Type Pkg/10 RETAIL

•

Part No.

Fitting Type

LM ISRKE LM ISRK

Black Poly 101 Pcs. + Case $ 296.14 White Poly 92 Pcs. + Case 312.22

www.dultmeier.com

• DAVENPORT, IA

Kit Size

RETAIL

(800) 553-6975

E0356

Super Speedfit Plumbing Fittings

The push-fit solution for copper and plastic pipe or tube. Ideal for use in plumbing and heating systems. Can be used with copper, CPVC, PEX, pipe. Note: CTS sizes correspond to tube size as follows: 1/2” CTS=5/8” OD Tubing. 3/4” CTS=7/8” Tubing. 1” CTS = 1-1/4” Tubing. Rated for water pressures to 160 PSI at 73˚ F. or 100 PSI at 180˚ F.

10% Discounts for Standard Package Purchases - Call for Details! #3

Male Connector

Reducing Tee

(Pipe x MPT)

Part No. Pipe LM PE2024 1/2” CTS LM PE2026 1/2” CTS LM PE2826 3/4” CTS LM PE3626 1” CTS LM PE3628 1” CTS

MPT 1/2” 3/4” 3/4” 3/4” 1”

RETAIL $ 4.98 5.65 5.59 9.18 10.39

(Pipe x Pipe)

Part No. LM PE0420 LM PE0428 LM PE0436

Pipe 1/2” CTS 3/4” CTS 1” CTS

Part No. LM PE3028C LM PE3028A LM PEI3028B LM PE3028D

D D

Union Connector D

Pipe 1/2” CTS 3/4” CTS 1” CTS

Union Tee

Part No. LM PE0220 LM PE0228 LM PE0236

RETAIL $ 5.05 6.59 12.80

Pipe RETAIL 1/2” CTS $ 6.90 3/4” CTS 9.85 1” CTS 17.96

(Pipe x Pipe)

NPT 3/4” FPT

RETAIL $ 13.33

(Pipe x Stem)

Provides a swivel connection when used with male or union connectors. Part No. LM PE2020 LM PE2828

Pipe 1/2” CTS 3/4” CTS

Part No. Pipe Pipe RETAIL LM PE2028 3/4” CTS 1/2” CTS $ 6.32 LM PE2036 1” CTS 3/4” CTS 9.31

Stem Elbow D

Reducing Coupler

(Pipe x Brass NPT) Pipe 3/4” CTS

Pipe Size #1 #2 #3 RETAIL 1/2” 1/2” 3/4” $ 8.64 3/4” 3/4” 1/2” 9.45 3/4” 1/2” 1/2” 8.38 3/4” 1/2” 3/4” 9.45

(Pipe x Pipe x Pipe)

Female Connector Part No. LM PE4528

(Pipe x Pipe x Pipe)

Stem 1/2” CTS 3/4” CTS

Slip Connector/Burst Pipe Repair Fitting A quick and easy method of replacing burst or damaged pipe without the need to alter existing pipe work.

RETAIL $ 4.05 5.65

Part No. LM 1/2SCP LM 3/4SCP

Male Fixed Elbow

Pipe RETAIL 1/2” CTS $ 8.64 3/4” CTS 11.06

(Pipe x NPT)

Part No. LM PE4820

Pipe 1/2” CTS

NPT 1/2” MPT

RETAIL $ 5.25

Shut Off Valve

(Pipe x Pipe)

Union Elbow

(Pipe x Pipe)

Part No. Pipe Pipe RETAIL LM PE0320 1/2” CTS 1/2” CTS $ 5.72 LM PE0328 3/4” CTS 3/4” CTS 8.78 LM PE0336 1” CTS 1” CTS 14.54

(Pipe x Pipe)

Part No. Pipe Pipe RETAIL LM PE2128 3/4” CTS 1/2” CTS $ 10.12

Reducer

End Cap

(Pipe) D

Pex Pipe

(Pipe x Stem)

Provides a step down whe used with Union or Male Connectors Part No. Pipe LM PE62820 3/4” CTS LM PE63628 1” CTS

Stem 1/2” CTS 3/4” CTS

DULTMEIER SALES • OMAHA, NE

Pipe RETAIL 1/2” CTS $ 18.16 3/4” CTS 22.51

Part No. Pipe Color RETAIL LM PE4620 1/2” CTS White $ 4.11 LM PE4620B 1/2” CTS Blue 4.11 LM PE4620R 1/2” CTS Red 4.11 LM PE4628 3/4” CTS White 5.19 LM PE4636 1” CTS White 8.38

Reducing Elbow

Part No. LM PSEISV20 LM PSEISV28

RETAIL $ 5.65 6.66

(100’ lengths)

NSF Rated for Potable Water

White is Standard. Blue & Red are available. 300’ & 500’ Coils also available.

Part No. RETAIL LM 20PEX 1/2” CTS x 100’.............. $ 32.96 LM 28PEX 3/4” CTS x 100’.............. 56.68

(800) 228-9666 • www.dultmeier.com • DAVENPORT, IA

(800) 553-6975

E0744

Super Speedfit Plumbing Fittings

LARGE QUANTITY DISCOUNTS: LESS 15% For Purchases in Bags of 10 Not Assorted - 20% On 100 Assorted Fittings in Bags of 10 - 30% on 1000 Assorted Fittings in Bags of 10.

Check Valve (Tube x Tube)

Cross Part No.

Tube Discount O.D. Type Pkg/10 RETAIL

LM CR38 3/8” X4” Gray

Bulkhead Unions

15%

$ 7.44

Part No.

Tube Tube Discount Part No. O.D. O.D. Type Pkg/10 RETAIL LM BU1414 1/4” 1/4” Gray 15% $ 4.45 LM BU3814 3/8” 1/4” Gray 15% 7.17 LM BU3838 3/8” 3/8” Gray 15% 5.79 LM BU1212 1/2” 1/2” Gray 15% 9.72 LM TU1414 1/4” 1/4” White 15% 5.05 LM TU3838 3/8” 3/8” White 15% 5.45 LM TU1212 1/2” 1/2” White 15% 8.51 LM BUB14 1/4” 1/4” Black 15% 5.05 LM BUB38 3/8” 3/8” Black 15% 6.66

Allows Flow in One Direction

TUBE Cracking Discount O.D. Type PSI Pkg/10

LM SCV14 1/4" Gray 1/3 PSI LM NC2718 1/4” Gray 5 PSI LM NC2718E 1/4” Black 5 PSI LM SCV38 3/8" Gray 1/3 PSI

15% 15% 15% 15%

RETAIL

$ 12.13 15.54 15.54 12.93

Push-Lock Filter/Strainer Inline Filter/Strainers with push-lock design for hard wall tubing. Plastic construction is rated to 150 PSI and 150° F. 100 Mesh screen is standard. Easy-to-service and clean. Grey acetal. Part No.

Tube O.D.

RETAIL

LM ADMF0404 1/4" $ 5.84 LM ADMF0606 3/8” 6.83 LM ADMF0707 1/2” 7.10

Shut-Off Valves (Tube x Tube)

Locking Clips

John Guest Shut-Off Valves are manufactured in white polypropylene or black polypropylene for chemicals or water, (not for compressed air) or gray acetal for use with water and compressed air. Rated to 150 PSI at 70° F.

Secures the Collet in Its Position

Inline Valve, Tube x Tube

Tube

Part No.

Tube D

$6.06 7.04 8.78 5.99 6.32

• Buna Seals • 1/2” x 1/2” Acetal Body • Push Tube Connect Part No.

* Rated for use with compressed air.

Inline Valve, Tube x MPT

RETAIL

$ 0.27

Push to Connect Polypropylene Check Valves

MPT

Tube Discount O.D. MPT Type Pkg/50 RETAIL LM PSV20 1/4” 1/4” White 10% $ 6.90 LM PSV35 3/8” 3/8” White 10% 6.39

Tube

Inline Valve, Female x Tube

• Viton® Seals • 316SS Spring & Ball • Push Tube Connect (In & Out)

Part No. Tube O.D. Opening Pressure (PSI) BU CV1101-P14 1/4" 1.0 BU CV1101-P56 5/16” 1.0 BU CV1101-P38 3/8” 1.0 BU CV1103-P14 1/4” 3.0 BU CV1103-P38 3/8” 3.0

RETAIL $ 15.54 15.81 22.51 18.69 21.84

FPT

Tube

FPT

Tube Discount O.D. FPT Type Pkg/50 LM PSV40 Angle Valve 1/4” 1/4” White 10% LM PSV55 Angle Valve 3/8” 1/4” White 10% LM PPS38 Inline Valve 3/8” 3/8” Black 10%

IND

Size

LM ACHV0707 1/2” x 1/2”

Part No.

Secures the collet in its position to prevent an accidental disconnection of the tube. Can be removed if required.

Push Lock Check Valve

Tube Tube Discount O.D. O.D. Type Pkg/50 RETAIL

LM PSV5 1/4” 1/4” White 10% LM PSV10 3/8” 3/8” White 10% LM PSV04 * 3/8” 3/8” Gray 10% LM BVS14 1/4” 1/4” Black 10% LM BVS38 3/8” 3/8” Black 10%

RETAIL

LM PIC1808R 1/4" $ 0.27 LM PIC1812R 3/8" 0.34 LM PIC1816R 1/2” 0.34

Part No.

TUBE O.D.

DULTMEIER SALES • OMAHA, NE

RETAIL

$ 7.71 7.71 9.98

(800) 228-9666

•

www.dultmeier.com

• DAVENPORT, IA

(800) 553-6975

E1031

Prestolok Tube Fittings

Push-to-Connect Tube Fittings with nickel-plated, forged brass bodies. Ideal for use with a wide variety of thermoplastic tubings. Specially designed for easy assembly and disassembly. The perfect choice for use with fluid or air lines. Nickel-plated bodies are standard with nitrile o-rings, stainless steel grab rings and polyacetal release buttons. All fittings with male threads feature preapplied sealant for leak-free assembly. Rated from vacuum to 300 PSI and from 0° to 200° F. Available in a variety of types and sizes to meet all of your plumbing needs.

— Nickel-Plated Bodies — Model 165

Model W68

Male Connectors (Tube x MPT) SOLID Discount Part No. Tube O.D. MPT Pkg/10 PA W68-22 1/8" 1/8" 10% PA W68-44 1/4” 1/4” 10% PA W68-46 1/4” 3/8” 10% PA W68-64 3/8” 1/4” 10% PA W68-66 3/8” 3/8” 10% PA W68-68 3/8” 1/2” 10% PA W68-84 1/2” 1/4” 10% PA W68-86 1/2” 3/8” 10% PA W68-88 1/2” 1/2” 10%

RETAIL $ 4.05 4.58 5.12 7.71 8.24 10.25 9.05 10.92 MPT 14.00

Union Elbows (Tube x Tube) Discount Part No. Tube O.D. Pkg/10 PA 165P-2 1/8" 10% PA 165P-4 1/4” 10% PA 165P-6 3/8” 10% PA 165P-8 1/2” 10%

Male Elbows (Tube x MPT) SOLID (W169) (Tube x MPT) SWIVEL (W169S)

Model 66PLP

Female Connectors (Tube x FPT) Discount Part No. Tube O.D. FPT Pkg/10 PA 66PLP-22 1/8" 1/8" 10% PA 66PLP-44 1/4” 1/4” 10% PA 66PLP-64 3/8” 1/4” 10% PA 66PLP-66 3/8” 3/8” 10%

FPT

RETAIL $ 8.51 9.31 14.54 16.21

Model 62PLP

Union Connectors (Tube x Tube) Discount Part No. Tube O.D. Pkg/10 PA 62PLP-2 1/8" x 1/8” 10% PA 62PLP-4 1/4” x 1/4” 10% PA 62PLP-6 3/8” x 3/8” 10% PA 62PLP-8 1/2” x 1/2” 10%

RETAIL $ 6.32 5.79 8.38 11.06

MPT Swivel D

Discount Part No. Tube O.D. Pkg/10 PA 62BH-2 1/8" 10% PA 62BH-4 1/4” 10% PA 62BH-6 3/8” 10% PA 62BH-8 1/2” 10%

RETAIL $ 8.38 9.05 13.20 18.89

10% 10% 10% 10% 10% 10% 10% 10%

6.19 10.25 8.78 9.85 17.15 11.32 11.73 15.68

MPT

W169

MPT

W169S

RETAIL $ 10.52 7.84 11.46 15.28

(800) 228-9666

Discount Part No. Tube O.D. MPT Pkg/10 PA W171-22 1/8" 1/8" 10% PA W171-42 1/4” 1/8” 10% PA W171-44 1/4” 1/4” 10% PA W171-46 1/4” 3/8” 10% PA W171-64 3/8” 1/4” 10% PA W171-66 3/8” 3/8” 10% PA W171-86 1/2” 3/8” 10% PA W171-88 1/2” 1/2” 10%

•

RETAIL $ 11.46 8.64 8.38 19.70 18.76 16.75 22.91 22.78

Model W172

Branch Tees (Tube x Tube x MPT) SWIVEL Discount Part No. Tube O.D. MPT Pkg/10 PA W172-22 1/8" 1/8" 10% PA W172-42 1/4” 1/8” 10% PA W172-44 1/4” 1/4” 10% PA W172-46 1/4” 3/8” 10% PA W172-64 3/8” 1/4” 10% PA W172-66 3/8” 3/8” 10% PA W172-86 1/2” 3/8” 10% PA W172-88 1/2” 1/2” 10%

Union Tees (Tube x Tube x Tube)

DULTMEIER SALES • OMAHA, NE

1/4” 3/8” 1/4” 3/8” 1/2” 1/4” 3/8” 1/2”

Street Tees (Tube x Tube x MPT) SWIVEL

Model 164

IND

Swivel PA W169S-44 1/4” PA W169S-46 1/4” PA W169S-64 3/8” PA W169S-66 3/8” PA W169S-68 3/8” PA W169S-84 1/2” PA W169S-86 1/2” PA W169S-88 1/2”

RETAIL $ 5.12 5.25 5.92 7.71 8.91 9.05 14.14

Model W171

Bulkhead Fittings (Tube x Tube)

Discount Part No. Tube O.D. Pkg/10 PA 164P-2 1/8" 10% PA 164P-4 1/4” 10% PA 164P-6 3/8” 10% PA 164P-8 1/2” 10%

Solid Discount Part No. Tube O.D. MPT Pkg/10 PA W169-22 1/8" 1/8" 10% PA W169-42 1/4” 1/8” 10% PA W169-44 1/4” 1/4” 10% PA W169-64 3/8” 1/4” 10% PA W169-66 3/8” 3/8” 10% PA W169-86 1/2” 3/8” 10% PA W169-88 1/2” 1/2” 10%

Model 62BH

RETAIL $ 7.44 5.92 10.25 14.41

www.dultmeier.com

• DAVENPORT, IA

RETAIL $ 8.91 7.84 7.84 8.38 12.53 14.87 16.08 21.31

(800) 553-6975

MPT Swivel

E0838

Mini Ball & Check Valves

Mini Ball Valves Polypropylene Ball Valves with Push-In Fittings can be used with a wide variety of plastic tubing. Molded-All-Plastic design is leak-free and corrosion-resistant. Polypropylene bodies with EPDM o-rings offer wide chemical resistance. Bidirectional, full flow design. Ball valves rated from 0° to 225° F. and pressures to 150 PSI. These ball valves meet all FDA and NSF-51 requirements.

Model VME

Model VMC

Angle Valves (Tube x MPT)

Inline Valves (Tube x MPT)

Part No. Tube O.D. MPT RETAIL PA 4VME4 1/4” 1/4” $ 7.91 PA 4VME6 1/4” 3/8” 8.91 PA 6VME4 3/8” 1/4” 7.04 PA 6VME6 3/8” 3/8” 7.71 PA 6VME8 3/8” 1/2” 11.73

Tube MPT

Part No. Tube O.D. MPT RETAIL PA 4VMC4 1/4” 1/4” $ 5.65 PA 4VMC6 1/4” 3/8” 7.17 PA 6VMC4 3/8” 1/4” 6.77 PA 6VMC6 3/8” 3/8” 6.06

Tube

10% Discount on Packs of 10

MPT

Model VMC

Model VME

Inline Valves (Hose x MPT)

Angle Valves (MPT x HB) Part No. Hose Barb MPT RETAIL PA 4VME4HB 1/4” 1/4” $ 8.38 PA 6VME6HB 3/8” 3/8” 8.38 10% Discount on Packs of 10

MPT

Part No. Hose Barb MPT RETAIL PA 4VMC4HB 1/4” 1/4” $ 8.38 PA 6VMC6HB 3/8” 3/8” 8.38 10% Discount on Packs of 10

Hose Barb

MPT

Model VFE

Angle Valves (Tube x FPT) Tube

Model VFC

Part No. Tube O.D. FPT RETAIL PA 4VFE4 1/4” 1/4” $ 6.90 PA 4VFE6 1/4” 3/8” 7.97 PA 6VFE4 3/8” 1/4” 6.46 PA 6VFE6 3/8” 3/8” 6.90

FPT

Inline Valves (Tube x FPT) Tube FPT D

10% Discount on Packs of 10

Part No. Tube O.D. FPT RETAIL PA 4VFC4 1/4” 1/4” $ 7.71 PA 4VFC6 3/8” 1/4” 7.71 PA 6VFC4 3/8” 1/4” 7.71 PA 6VFC6 3/8” 3/8” 7.71 10% Discount on Packs of 10

Model VFE

Angle Valves (FPT x HB) Part No. Hose Barb FPT RETAIL PA 4VFE4HB 1/4” 1/4” $ 8.38 PA 6VFE4HB 3/8” 1/4” 8.38 PA 6VFE6HB 3/8” 3/8” 8.38 10% Discount on Packs of 10

Model VFC

Hose Barb

Inline Valves (Hose x FPT) Part No. Hose Barb FPT RETAIL PA 4VFC4HB 1/4” 1/4” $ 8.38 PA 6VFC6HB 3/8” 3/8” 8.38 10% Discount on Packs of 10

FPT

Model VUC

Inline Valves (Tube x Tube)

Tube

10% Discount on Packs of 10

Model VUC

Part No. Hose Barbs RETAIL PA 4VUC4HB 1/4” $ 8.38 PA 6VUC6HB 3/8” 8.24 PA 8VUC8HB 1/2” 8.38 10% Discount on Packs of 10

Tube

IND

#1 #2 Part No. Tube O.D. Tube O.D. RETAIL PA 4VEU4 1/4” 1/4” $ 10.65 PA 4VEU6 1/4” 3/8” 10.25 PA 6VEU4 3/8” 1/4” 9.58 PA 6VEU6 3/8” 3/8” 8.91 10% Discount on Packs of 10

#2 Tube

Push True-Seal™ Check Valves

Hose

(800) 228-9666

Push-to-Connect Check Valves ensure protection against reverse flow. Can be used with thermoplastic or soft metal tubings. Acetal body and EPDM o-ring are designed for liquids only. Rated for +34° F. to 150° F. and up to 150 PSI. Cracking pressure is 1/3 PSI.

Part No. Hose Barb Tube O.D. RETAIL PA 4VUCPB4 1/4” 1/4” $ 8.24 PA 6VUCPB6 3/8” 3/8” 8.11 10% Discount on Packs of 10

DULTMEIER SALES • OMAHA, NE

Tube

Model VUCP

Hose Barb

#1 Tube

Inline Valves (Tube x HB) D

Model VEU

Hose

Inline Valves (Hose x Hose)

FPT

Elbow Union Valves (Tube x Tube)

Tube Tube Tube Part No. O.D. O.D. RETAIL PA 4VUC4 1/4” 1/4” $ 6.06 PA 4VUC6 1/4” 3/8” 8.24 PA 6VUC6 3/8” 3/8” 6.46

Hose Barb

Part No. Tube Tube RETAIL PA A4VC4 1/4” 1/4” $ 10.12 PA A6VC6 3/8” 3/8” 11.32 10% Discount on Packs of 25

•

www.dultmeier.com

• DAVENPORT, IA

(800) 553-6975

E0842

SuperLok Compression Fittings

SuperLok I-Fittings

— Compression Tube Fittings — Stainless Steel Superlok I-Fittings provide a reliable, leak-proof seal under severe conditions and applications. Ideal for use with various kinds of tubing, including steel, copper and stainless. An ideal choice for fluid and solutions transfer, vacuum applications, gases, high temperatures, vibration, pulsation and more. All fittings are 316SS construction and can be easily and quickly assembled without any special tools. Rated to full pressures at 200° F. or reduced pressures up to 1200° F. Patented I-Fitting design virtually eliminates over-tightening due to a patented inspection ring on every fitting that breaks off when correct torque setting has been reached. No special tools or gauges are required. All fittings are interchangeable with other common brands such as Parker, Swagelok, and DK Lok. 1/4” O.D. Fittings are Rated to 10,200 PSI at 200° F. 3/8” O.D. Fittings are Rated to 6,500 PSI at 200° F. 1/2” O.D. Fittings are Rated to 6,500 PSI at 200° F. 3/4” O.D. Fittings are Rated to 5,800 PSI at 200° F.

Straight Union (Tube x Tube)

Tube MPT Part No. O.D. Size RETAIL MA SMCI44N 1/4” 1/4” $ 10.92 MA SMCI46N 1/4” 3/8” 12.93 MA SMCI64N 3/8” 1/4” 12.66 MA SMCI66N 3/8” 3/8” 14.54 MA SMCI68N 3/8” 1/2” 17.42 MA SMCI86N 1/2” 3/8” 19.30 MA SMCI88N 1/2” 1/2” 21.31 MA SAUI88U * 1/2” 1/2” 20.23 MA SMCI128N 3/4” 1/2” 25.33 MA SMCI1212N 3/4” 3/4” 31.09 * 1/2” Male JIC

Female Connector (Tube x FPT)

Union Tee

Tube Tube Part No. O.D. O.D. RETAIL MA SUI4 1/4” 1/4” $ 15.95 MA SUI64 3/8” 1/4” 20.37 MA SUI6 3/8” 3/8” 18.63 MA SUI86 1/2” 3/8” 30.82 MA SUI8 1/2” 1/2” 29.48 MA SUI128 3/4” 1/2” 45.83 MA SUI12 3/4” 3/4” 41.14

(Tube x Tube x Tube) Tubes Part No. O.D. RETAIL MA SUTI4 1/4” $ 29.35 MA SUTI6 3/8” 35.78 MA SUTI8 1/2” 49.85 MA SUTI12 3/4” 71.02

Male Connector

Branch Tee

(Tube x MPT)

(Tube x MPT x Tube) Tubes Part No. O.D. MA SMBTI44N 1/4” MA SMBTI66N 3/8” MA SMBTI88N 1/2”

Cross

(All Tube)

Tube FPT Part No. O.D. Size RETAIL MA SFCI44N 1/4” 1/4” $ 15.28 MA SFCI46N 1/4” 3/8” 17.69 MA SFCI64N 3/8” 1/4” 17.29 MA SFCI66N 3/8” 3/8” 18.49 MA SFCI68N 3/8” 1/2” 24.79 MA SFCI86N 1/2” 3/8” 23.18 MA SFCI88N 1/2” 1/2” 26.80 MA SFCI128N 3/4” 1/2” 33.10 MA SFCI1212N 3/4” 3/4” 37.12

Tubes Part No. O.D. RETAIL MA SUCI4 1/4” $ 49.58 MA SUCI6 3/8” 61.37 MA SUCI8 1/2” 69.01

Cap

(Tube)

90° Union Elbow

Tube Part No. O.D. RETAIL MA SCI4 1/4” $ 9.31 MA SCI6 3/8” 10.12 MA SCI8 1/2” 15.54

(Tube x Tube)

Part No. MA SUEI4 MA SUEI6 MA SUEI8 MA SUEI12

MPT Size RETAIL 1/4” $ 29.21 3/8” 32.83 1/2” 47.84

Tube Tube O.D. Size RETAIL 1/4” 1/4” $ 21.57 3/8” 3/8” 23.99 1/2” 1/2” 35.38 3/4” 3/4” 56.68

Ball Valves (Tube x Tube)

90° Male Elbow (Tube x MPT)

Tube MPT Part No. O.D. Size RETAIL MA SMEI44N 1/4” 1/4” $ 19.03 MA SMEI46N 1/4” 3/8” 22.11 MA SMEI66N 3/8” 3/8” 22.91 MA SMEI68N 3/8” 1/2” 29.61 MA SMEI86N 1/2” 3/8” 26.13 MA SMEI88N 1/2” 1/2” 33.50 MA SMEI128N 3/4” 1/2” 44.22 MA SMEI1212N 3/4” 3/4” 44.22

SBV210IS - 1,000 PSI

SBV120H 3,000 PSI

Check Valves

90° Female Elbow (Tube x FPT)

DULTMEIER SALES • OMAHA, NE

10 PSI Spring

(Tube x Tube)

Tube Max. Part No. O.D. PSI RETAIL MA SHCV1S4 1/4” 6,000 $ 72.36 MA SHCV2S6 3/8” 6,000 108.54 MA SHCV2S8 1/2” 6,000 122.61 MA SHCV3S12 3/4” 6,000 286.76

Tube Tube Part No. O.D. Size RETAIL MA SFEI44N 1/4” 1/4” $ 22.11 MA SFEI66N 3/8” 3/8” 26.26 MA SFEI88N 1/2” 1/2” 40.07 MA SFEI1212N 3/4” 3/4” 70.35

IND

Tube Max. Part No. O.D. PSI RETAIL MA SBV210IS4 1/4” 1,000 $ 40.47 MA SBV210IS6 3/8” 1,000 48.24 MA SBV210IS8 1/2” 1,000 60.97 MA SBV210IS12 3/4” 1,000 102.51 MA SBV120H4 1/4” 3,000 95.81 MA SBV120H6 3/8” 3,000 119.93 MA SBV120H8 1/2” 3,000 263.98 MA SBV120H12 3/4” 3,000 280.06

(800) 228-9666

•

www.dultmeier.com

• DAVENPORT, IA

(800) 553-6975

E1187

Nylon Lever Couplings

Nylon Lever Couplings for CHEMICAL • PETROLEUM • FERTILIZER These Glass Fiber Reinforced Nylon Couplings will mate with any coupling, metal or plastic, actually manufactured to Specification MIL-C-27487 dimensions. This Specification has become the basic standard for cam type couplings. Resistant to Hydrocarbons, Solvents, most Agricultural Chemicals, but not recommended for acid-based fertilizers. Temperature Ranges from -30° to +200°. F. Working Pressures to 150 PSI on 1-1/2" and 2" size, 125 PSI on 3", and 75 PSI on 4" size. Handles and Stainless Pins are replaceable. Gaskets are EPDM. Stainless Steel Handles. Locking feature on cam arms.

Female Adapters D

Male Adapters

Part No. Size RETAIL FC 075AN 3/4” Female Adapter $ 3.63 FC 100A 1” Female Adapter 3.97 FC 150A 1-1/2” Female Adapter 6.19 FC 200A 2” Female Adapter 6.77 FC 300A 3” Female Adapter 15.01 FC 400A 4” Female Adapter 26.93

Part No. FC 075F FC 100F FC 150F FC 200F FC 300F FC 400F

Male Couplers Part No. Size FC 075BN 3/4” Male Coupler FC 100B 1” Male Coupler FC 150B 1-1/2” Male Coupler FC 200B 2” Male Coupler FC 300B 3” Male Coupler FC 400B 4” Male Coupler

Part No. FC 075C FC 100C FC 150C FC 200C FC 300C FC 400C

RETAIL $ 4.76 5.11 6.77 7.17 17.96 28.81

Dust Plugs RETAIL $ 8.98 10.79 14.34 16.21 27.60 38.46

Part No. Size FC 075DPN 3/4” Dust Plug FC 100PL 1” Dust Plug FC 150PL 1-1/2” Dust Plug FC 200PL 2” Dust Plug FC 300PL 3” Dust Plug FC 400PL 4” Dust Plug

Shank Couplers D

Size 3/4” Male Adapter 1” Male Adapter 1-1/2” Male Adapter 2” Male Adapter 3” Male Adapter 4” Male Adapter

RETAIL $ 3.79 4.27 5.11 6.20 15.61 19.70

Caps

Size RETAIL 3/4” Shank Coupler $ 8.98 1” Shank Coupler 10.32 1-1/2” Shank Coupler 14.34 2” Shank Coupler 16.35 3” Shank Coupler 25.46 4” Shank Coupler 37.39

Part No. Size FC 075CAP 3/4” Dust Cap FC 100CAP 1” Dust Cap FC 150CAP 1-1/2” Dust Cap FC 200CAP 2” Dust Cap FC 300CAP 3” Dust Cap FC 400CAP 4” Dust Cap

CAP

RETAIL $ 8.38 9.58 14.14 15.95 24.52 33.10

Hose Barbs, Male

Female Couplers

Part No. FC 075D FC 100D FC 150D FC 200D FC 300D FC 400D

Size RETAIL 3/4” Female Coupler $ 8.98 1” Female Coupler 10.18 1-1/2” Female Coupler 14.67 2” Female Coupler 16.35 3” Female Coupler 28.41 4” Female Coupler 40.74

Part No. Size RETAIL FC HB150 1-1/2” Hose Barb, Male $ 3.12 FC HB200 2” Hose Barb, Male 4.76 FC HB300 3” Hose Barb, Male 10.79 FC HB400 4” Hose Barb, Male 15.61

Food Grade Fittings

Shank Adapters D

Part No. FC 075E FC 100E FC 150E FC 200E FC 300E FC 400E

Size 3/4” Shank Adapter 1” Shank Adapter 1-1/2” Shank Adapter 2” Shank Adapter 3” Shank Adapter 4” Shank Adapter

RETAIL $ 4.76 5.52 6.42 7.44 14.20 26.26

Bee Valve Food Grade Fittings in white glass-filled polypropylene. FDA and NSF compliant. Resistant to alkalies, Salts, Alcohols, most acids and oils. Available in 3/4”, 1”, 1-1/2”, 2” and 3” sizes. Nitrile gaskets (EPDM, Buna and Viton® are optional). Stainless handles. 10° to 180° F.

See Our Web Page (E2009) on Our Website - www.dultmeier.com For More Details !

Viton® is a registered trademark of DuPont Performance Elastomers

DULTMEIER SALES • OMAHA, NE

(800) 228-9666

•

www.dultmeier.com

• DAVENPORT, IA

(800) 553-6975

E0351

Locking Couplings

64 2”

Greenleaf Locking Couplings Polypropylene Reducer Coupling 3”

Part No. TK 303B200A

The Greenleaf locking feature is available on the Polypropylene Couplings listed below. The patented push button lock works more easily than anything on the market. The lock will reduce the possibility of unintentional opening of the cam arms which reduces spills. Couplers are glass-filled polypropylene with stainless cam arms, EPDM gaskets. 125 PSI maximum at 70° F. through 2”, 75 PSI on 3 to 4”. Couplers are interchangeable with other brands and materials.

Description RETAIL 3” Female Coupler with 3 Arms - 2” Male Adapter... $ 45.16

Camlock / Cam Lever Adapter Male Adapter / Male Adapter • Polypropylene

Part B

FEATURES:

Locking Couplers X MPT

• EPDM Gaskets • 304 Stainless Levers, Pins & Rings

Std. Part No. Size Pkg. RETAIL GF GLP075B 3/4” Locking Coupler X MPT 10 $ 11.93 GF GLP100B 1” Locking Coupler X MPT 10 13.67 GF GLP150B 1-1/2” Locking Coupler X MPT 10 16.08 GF GLP200B 2” Locking Coupler X MPT 10 20.10 GF GLP300B 3” Locking Coupler X MPT 10 33.77

• Operating Pressures: 3/8” thru 2” ia 100 PSI @ 0° F.; 125 PSI @ 70° F. 2-1/2”, 3” & 4” Cap - 50 PSI Couplings 75 PSI Maximum.

Series “B”

• FDA Approved for Potable Water Part No. TK 300F200F TK 300FF

Description RETAIL Camlock/Cam Lever Adapter, 3” Male Adapter x 2” Male Adapter, Polypropylene............... $ 39.40 Camlock/Cam Lever Adapter, 3” Male Adapter x 3” Male Adapter, Polypropylene............... 39.40

Part C Locking Couplers X Hose Conn. Std. Part No. Size Pkg. RETAIL GF GLP075C 3/4” Locking Coupler X MPT 10 $ 11.93 GF GLP100C 1” Locking Coupler X MPT 10 13.67 GF GLP150C 1-1/2” Locking Coupler X MPT 10 16.08 GF GLP200C 2” Locking Coupler X MPT 10 20.10 GF GLP300C 3” Locking Coupler X MPT 10 33.77

Visit Us On the Internet!

Series “C”

Part D Locking Couplers X FPT Std. Part No. Size Pkg. RETAIL GF GLP075D 3/4” Locking Coupler X FPT 10 $ 12.26 GF GLP100D 1” Locking Coupler X FPT 10 13.67 GF GLP150D 1-1/2” Locking Coupler X FPT 10 16.08 GF GLP200D 2” Locking Coupler X FPT 10 20.10 GF GLP300D 3” Locking Coupler X FPT 10 33.77

Series “D”

Part DC Locking Caps Part No. Size GF GLP075CAP 3/4” Locking Cap GF GLP100CAP 1” Locking Cap GF GLP125CAP 1-1/4” Locking Cap GF GLP150CAP 1-1/2” Locking Cap GF GLP200CAP 2” Locking Cap GF GLP300CAP 3” Locking Cap

dultmeier.com View this catalog & Order on-line!

“CAP” Series

Jump Sizes

SERVICE & REPAIRS

Locking Couplers

Did you know? We can service almost every brand of pump we sell in our catalog.

Std. Part No. Pkg. RETAIL GF GLP050B 3/4” B Locking Coupler X 1/2” MPT..... 10 $ 11.93 GF GLP125B 1” B Locking Coupler X 1-1/4 MPT...... 10 13.67 GF GLP050C 3/4” C Locking Coupler X 1/2” HB....... 10 11.93 GF GLP125C 1” C Locking Coupler X 1-1/4” HB....... 10 14.14 GF GLP050D 3/4” D Locking Coupler X 1/2” FPT..... 10 11.93 GF GLP125D 1” D Locking Coupler X 1-1/4” FPT..... 10 13.67

Call us at 1-800-228-9666 (Omaha, NE) for a quote!

DULTMEIER SALES • OMAHA, NE

Std. Pkg. RETAIL 10 $ 11.93 10 14.07 10 13.67 10 16.55 10 20.10 10 33.77

(800) 228-9666

•

www.dultmeier.com

• DAVENPORT, IA

(800) 553-6975

E1216

Polypropylene Cam Lever Couplings

Polypropylene Cam Lever Couplings “Best Choice for Acid Base Fertilizers” Features: EPDM Gaskets. • 3 04 Stainless Levers, Pins, and Rings. EPDM Gaskets Std. • Operating Pressure: 3/8" thru 2": 100 PSI @ 0˚ F.; 125 PSI @ 70˚ F. 2-1/2", 3" & 4" Cap-50 PSI Couplings 75 PSI Max. • FDA approved for potable water. Note: P303C & All 4” couplings have 3 arms for positive seal! All Standard Configurations 1”, 1-1/2”, 2” & 3” Poly Lever Couplings are available in BSP (British Pipe Threads) - Just Add Suffix “B”.

FPT Adapters with Tabs Part No. TK 75A-1/4SA TK 75A-3/8SA TK 75A-1/2SA TK 75A-3/4SA

Size FPT Adapter with Tab 1/4” † FPT Adapter with Tab 3/8” † FPT Adapter with Tab 1/2” † 3/4” † FPT Adapter with Tab

Caps

RETAIL $ 4.72 3.90 3.90 3.90

Adapters x FPT Part No. Size TK P050A 1/2” 3/4” Adapter x 1/2” FPT TK P075A 3/4” Female Adapter TK P100A 1” Female Adapter TK P125A 1-1/4” 1” Adapter x 1-1/4” FPT TK P150A 1-1/2” Female Adapter TK 150125A 1-1/2” 1-1/2” Adapter x 1-1/4” FPT TK P200A 2” Female Adapter TK P300A 3” Female Adapter TK P400A 4” Female Adapter

RETAIL $ 4.85 4.05 4.05 4.05 4.58 5.52 5.39 12.93 23.45

Couplers x MPT Part No. Size RETAIL TK P050B 1/2” † 3/4” Coupler x 1/2” MPT** $ 10.92 TK P075B 3/4” † Male Cplr w/Groove 9.18 TK P100B 1” Male Coupler 10.52 TK P125B 1-1/4” 1” Coupler x 1-1/4” MPT 10.52 TK P150B 1-1/2” Male Coupler 12.26 TK 150125B 1-1/2” 1-1/2” Coupler x 1-1/4” MPT 14.67 TK P200B 2” Male Coupler 15.01 TK P201B 2” x2-1/2” Male Coupler Extended Threads 15.01 TK P300B 3” Male Coupler 25.06 TK P303B 3”x3” Male Cplr w/3 Cams ExtendThreads 32.29 TK P400B 4” Male Coupler 59.63

Couplers x HB Part No. Size RETAIL TK P050C 1/2” 3/4” Coupler x 1/2” HB $ 9.18 TK P075C 3/4” Shank Coupler 9.18 TK P100C 1” Shank Coupler 10.52 TK P125C 1-1/4” 1” Coupler x 1-1/4” HB 10.52 TK P150C 1-1/2” Shank Coupler 12.26 TK 150125C 1-1/2” 1-1/2” Coupler x 1-1/4” HB 14.67 TK P200C 2” Shank Coupler 15.01 TK P200150C 2” 2” Coupler x 1-1/2” HB 16.88 TK P300C 3” Shank Coupler 25.06 TK P303C 3” Shk Cplr/3 Cplr Arm 32.29 TK P400C 4” Shank Coupler 49.85

Adapters x HB

CAP

Poly Plugs Part No. TK P075PL TK P100PL TK P150PL TK P200PL TK P300PL TK P400PL

Size RETAIL 3/4" Poly Plug $ 4.45 1" & 1-1/4” Poly Plug 4.18 1-1/2" Poly Plug 5.65 2" Poly Plug 6.32 3" Poly Plug 13.07 4" Poly Plug 18.63

Elbow Adapters x FPT Part No. TK P150A-90 TK P200A-90

Size RETAIL 1-1/2” Elbow Adapter X FPT $ 8.51 2” Elbow Adapter X FPT 9.72

A90

Elbow Couplers x HB Part No. TK P150C-90 TK P200C-90

Size RETAIL 1-1/2” Elbow Coupler X HB $ 17.69 2” Elbow Coupler X HB 18.36

C90

Elbow Couplers x FPT D

Part No. TK P150D-90 TK P200D-90

Size RETAIL 1-1/2” Elbow Coupler X FPT $ 17.69 2” Elbow Coupler X FPT 18.36

D90

Part No. TK P150F-90 TK P200F-90

Size RETAIL 1-1/2” Elbow Adapter X MPT $ 10.25 2” Elbow Adapter X MPT 9.18

F90

45° Male Adapter D

Part No. Size RETAIL TK P050E 1/2” 3/4” Adapter x 1/2” HB $ 4.45 TK P075E 3/4” Shank Adapter 4.45 TK P100E 1” Shank Adapter 4.85 TK P125E 1-1/4” 1” Adapter x 1-1/4” HB 4.85 TK P150E 1-1/2” Shank Adapter 4.85 TK 150125E 1-1/2” 1-1/2” Adapter x 1-1/4” FPT 5.79 TK P200E 2” Shank Adapter 6.32 TK P300E 3” Shank Adapter 16.48 TK P400E 4” Shank Adapter 23.45

Adapters x MPT D

Part No. Size RETAIL TK P075CAP 3/4” Dust Cap $ 9.18 TK P100CAP 1” Dust Cap 9.98 TK P150CAP 1-1/2” Dust Cap 12.26 TK P200CAP 2” Dust Cap 15.01 TK P300CAP 3” Dust Cap 25.06 TK P400CAP 4” Dust Cap 36.45

Elbow Adapters x MPT

Couplers x FPT

Part No. Size RETAIL TK P050D 1/2” 3/4” Coupler x 1/2” FPT** $ 9.18 TK P075D 3/4” Female Coupler 9.18 TK P100D 1” Female Coupler 10.52 TK P125D 1-1/4” 1” Coupler x 1-1/4” FPT 10.52 TK P150D 1-1/2” Female Coupler 12.26 TK 150125D 1-1/2” 1-1/2” Coupler x 1-1/4” FPT 14.67 TK P200D 2” Female Coupler 15.01 TK M220D 2” *** 2” FP Flange x 2” Fm Coupler 20.50 TK P300D 3” Female Coupler 25.06 TK M303D 3” *** 3” Flange x 3” Fm Coupler 39.40 TK P400D 4” Female Coupler 49.85

* Available for 1-1/2” & 2”

Part No. Size RETAIL TK P050F 1/2” 3/4” Adapter x 1/2” MPT $ 4.45 TK P075F 3/4” Male Adapter 4.45 TK P100F 1” Male Adapter 4.85 TK P125F 1-1/4” 1” Adapter x 1-1/4” MPT 4.85 TK P150F 1-1/2” Male Adapter 4.85 TK 150125F 1-1/2” 1-1/2” Adapter x 1-1/4” MPT 5.79 TK P200F 2” Male Adapter 6.32 TK P300F 3” Male Adapter 16.48 TK P400F 4” Male Adapter 23.45

Part No. Size TK P200F-45 2” 45° Male Adapter x 2” Male Thread

RETAIL $ 17.29

F45

Elbow Coupler x MPT D

Part No. Size RETAIL TK P200B-90 2” 90° Female Coupler x 2” Male Thread $ 21.84

B90

** With Guide Lock. † 75A Adapters with tab fit P050B & P075B Male Couplers with groove. *** Manifold Flange Style. Note: On 1/2” size the coupler & adapter ends are 3/4”. Threads & Hose Barbs are 1/2”. On 1-1/4” size the coupler & adapter ends are 1”. Threads & hose barbs are 1-1/4”

IND

DULTMEIER SALES • OMAHA, NE

(800) 228-9666

•

www.dultmeier.com

• DAVENPORT, IA

(800) 553-6975

E1018

Stainless Lever Couplings

304 Stainless Steel Lever Couplings

316 Stainless Steel Lever Couplings

with Stainless Steel Handles & Buna Gaskets

Operating Pressures: 3/4” to 2” is 250 PSI; 3” to 4” is 150 PSI and 5” to 6” is 75 PSI. Part No. Size RETAIL

PART Adapter

Female Thread

* 316SS

Part No. Size RETAIL TK 050BSS 1/2” $ 8.44 TK 075BSS * 3/4" 9.58 TK 100BSS * 1" 12.66 TK 150BSS * 1-1/2" 19.56 TK 200BSS 2" 24.46 TK 300BSS 3" 42.75 * 316SS TK 400BSS 4" 53.47 TK 600BSS 6” 117.92

PART Coupler Male Thread

PART Hose Shank Coupler

* 316SS

D D

PART Hose Shank Adapter

* 316SS

PART Adapter

Male Thread

Plug for Female Coupler

* 316SS

Not for Pressure Applications

A90

Part No. Size RETAIL TK 150C90SS 1-1/2" $ 297.48 TK 200C90SS 2” 255.94 TK 300C90SS 3” 369.84 TK 400C90SS 4” 703.50

C90

90° Coupler X Shank Elbow

D90

90° Coupler X FPT Elbow

F90

90° Adapter X MPT Elbow

IND

Part No. Size RETAIL TK 050FSS 1/2” $ 4.78 TK 075FSS 3/4" 5.32 TK 100FSS 1" 8.24 TK 150FSS 1-1/2" 12.93 TK 200FSS 2" 18.29 TK 300FSS 3" 34.04 TK 400FSS 4" 57.89 TK 600FSS 6” 130.65 Part No. Size RETAIL TK 050PLSS 1/2” $ 7.57 TK 075PLSS * 3/4" 4.31 TK 100PLSS * 1" 4.65 TK 150PLSS 1-1/2" 8.84 TK 200PLSS 2" 12.33 TK 300PLSS 3" 24.86 TK 400PLSS 4" 27.87 TK 600PLSS 6” 83.75

Part No. Size RETAIL TK 200A90SS 2” $ 336.34

90° Adapter X FPT Elbow

Part No. Size RETAIL TK 050ESS 1/2” $ 4.38 TK 075ESS * 3/4" 6.12 TK 100ESS * 1" 8.84 TK 150ESS 1-1/2" 13.20 TK 200ESS 2" 20.37 TK 300ESS 3" 35.24 TK 400ESS 4" 53.87 TK 600ESS 6” 154.10

Part No. Size RETAIL TK 050CAPSS 1/2” $ 15.68 TK 075CAPSS * 3/4" 9.11 TK 100CAPSS * 1" 10.72 TK 150CAPSS * 1-1/2" 18.43 TK 200CAPSS 2" 20.90 34.30 * 316SS TK 300CAPSS 3" TK 400CAPSS 4" 43.95 TK 600CAPSS 6” 105.19

CAP

Dust Cap for Male Adapter

Part No. Size RETAIL TK 050CSS 1/2” $ 7.84 TK 075CSS * 3/4" 10.72 TK 100CSS * 1" 13.40 TK 150CSS 1-1/2" 19.10 TK 200CSS 2" 25.06 TK 300CSS 3" 42.75 TK 400CSS 4" 61.91 TK 600CSS 6” 167.84

Part No. Size RETAIL TK 050DSS 1/2” $ 8.58 TK 075DSS * 3/4" 9.92 TK 100DSS * 1" 12.53 TK 150DSS * 1-1/2" 20.17 TK 200DSS 2" 24.05 TK 300DSS 3" 41.14 * 316SS TK 400DSS 4" 58.29 TK 600DSS 6” 134.67

PART Coupler Female Thread

TK 050ASS 1/2” $ 10.12 TK 075ASS * 3/4" 5.52 TK 100ASS * 1" 8.64 TK 150ASS 1-1/2" 11.79 TK 200ASS 2" 15.75 TK 300ASS 3" 28.14 TK 400ASS 4" 46.90 TK 600ASS 6” 101.17

Part No. Size RETAIL TK 100D90SS 1" $ 159.46 TK 200D90SS 2” 163.48 TK 300D90SS 3” 454.26 TK 400D90SS 4” 723.60

Operating Pressures: 3/4” to 2” is 250 PSI; 3” to 4” is 150 PSI and 5” to 6” is 75 PSI. Other Sizes Available.

PART Adapter

Part No. Size RETAIL TK 075ASS 3/4" $ 5.52 TK 100ASS 1" 8.64 TK 150ASS-316 1-1/2" 14.47 TK 200ASS-316 2" 20.50 TK 300ASS-316 3" 30.28 TK 400ASS-316 4" 50.52 TK 600ASS-316 6” 113.23

Female Thread

Part No. Size RETAIL TK 075BSS 3/4" $ 9.58 TK 100BSS 1" 12.66 TK 150BSS 1-1/2" 19.56 TK 200BSS-316 2" 28.27 TK 300BSS-316 3" 50.92 TK 400BSS-316 4" 60.57 TK 600BSS-316 6” 167.17

PART Coupler

Male Thread

Part No. Size RETAIL TK 075CSS 3/4" $ 10.72 TK 100CSS 1" 13.40 TK 150CSS-316 1-1/2" 22.31 TK 200CSS-316 2" 27.60 TK 300CSS-316 3" 52.26 TK 400CSS-316 4" 75.71 TK 600CSS-316 6” 179.90

PART Hose Shank Coupler

Part No. Size RETAIL TK 075DSS 3/4" $ 9.92 TK 100DSS 1" 12.53 TK 150DSS 1-1/2" 20.17 TK 200DSS-316 2" 27.34 TK 300DSS-316 3" 52.39 TK 400DSS-316 4" 66.87 TK 600DSS-316 6” 157.12

PART Coupler Female Thread

Part No. Size RETAIL TK 075ESS 3/4" $ 6.12 TK 100ESS 1" 8.84 TK 150ESS-316 1-1/2" 16.68 TK 200ESS-316 2" 22.51 TK 300ESS-316 3" 55.74 TK 400ESS-316 4" 64.45 TK 600ESS-316 6” 157.12

PART Hose Shank Adapter

Part No. Size RETAIL TK 075FSS-316 3/4" $ 7.44 TK 100FSS-316 1" 10.12 TK 150FSS-316 1-1/2" 17.89 TK 200FSS-316 2" 25.39 TK 300FSS-316 3" 49.31 TK 400FSS-316 4" 57.89 TK 600FSS-316 6” 140.37

PART Adapter

Male Thread

Plug for Female Coupler

Not for Pressure Applications

CAP

Dust Cap for Male Adapter

Part No. Size RETAIL TK 075PLSS 3/4" $ 4.31 TK 100PLSS 1" 4.65 TK 150PLSS-316 1-1/2" 11.86 TK 200PLSS-316 2" 16.62 TK 300PLSS-316 3" 32.29 TK 400PLSS-316 4" 45.16 TK 600PLSS-316 6” 103.18 Part No. Size RETAIL TK 075CAPSS 3/4" $ 9.11 TK 100CAPSS 1" 10.72 TK 150CAPSS 1-1/2" 18.43 TK 200CAPSS-316 2" 21.51 TK 300CAPSS-316 3" 37.39 TK 400CAPSS-316 4" 63.25 TK 600CAPSS-316 6” 134.34

45 Degree - 316SS Camlock Coupler

Used In Rail Car Unloading Standard with Buna Gaskets (EPDM Also Available) Part No. TK 400DA45SS

Description RETAIL 4” Male Adapter x 4” Female Coupler, 316SS....... $ 680.72

Part No. Size RETAIL TK 200F90SS 2” $ 314.90 TK 300F90SS 3” 550.74

DULTMEIER SALES • OMAHA, NE

(800) 228-9666

•

www.dultmeier.com

• DAVENPORT, IA

(800) 553-6975

E1243

Reducer Cam Style Lever Fittings, Adapters & Couplers

Aluminum construction with brass cam arms (can be easily changed out to stainless - See handles on following pages). Stainless construction with stainless cam arms. Polypropylene construction with stainless cam arms. All couplers are standard with Buna gaskets, but can be easily changed out as necessary (See following page for gaskets). Maximum pressure is 150 PSI for 3/4” to 4” and 75 PSI for 5” and 6”.

Part AAL (Aluminum) Part ASS (Stainless)

Part AA (Aluminum) FF (Polypropylene) ASS (316SS) Part No. EV 1520AA EV 200AA EV 200AASS EV 2030AA TK 300F200F EV 300AA EV 300AASS TK 300FF EV 3040AA EV 400AA EV 400AASS EV 4060AA EV 600AA

Description Material RETAIL 1-1/2” Adapter x 2” Adapter Aluminum $ 8.78 2” Adapter x 2” Adapter Aluminum 9.98 2” Adapter x 2” Adapter 316SS 53.87 2” Adapter x 3” Adapter Aluminum 15.21 2” Adapter x 3” Adapter Polypropylene 39.40 3” Adapter x 3” Adapter Aluminum 17.42 3” Adapter x 3” Adapter 316SS 93.13 3” Adapter x 3” Adapter Polypropylene 39.40 3” Adapter x 4” Adapter Aluminum 15.75 4” Adapter x 4” Adapter Aluminum 24.25 4” Adapter x 4” Adapter 316SS 71.69 4” Adapter x 6” Adapter Aluminum 26.53 6” Adapter x 6” Adapter Aluminum 38.73

Part No. EV 2015AAL EV 2030AAL EV 3020AAL EV 3040AAL EV 4030AAL EV 4060AAL EV 6040AAL EV 2015ASS EV 2030ASS EV 3020ASS EV 4030ASS

Male

Description Material RETAIL 1-1/2” Coupler x 2” Adapter Aluminum $ 11.79 2” Coupler x 1-1/2” Adapter Aluminum 12.93 2” Coupler x 3” Adapter Aluminum 17.89 2” Coupler x 3” Adapter 316SS 42.88 3” Coupler x 2” Adapter Aluminum 20.17 3” Coupler x 2” Adapter Polypropylene 45.16 3” Coupler x 2” Adapter 316SS 60.70 3” Coupler x 4” Adapter Aluminum 28.27 4” Coupler x 2” Adapter Aluminum 23.65 4” Coupler x 3” Adapter Aluminum 25.73 4” Coupler x 6” Adapter Aluminum 38.06 6” Coupler x 3” Adapter Aluminum 51.05 6” Coupler x 4” Adapter Aluminum 51.05

Part No. EV 2015BAL EV 2030BAL EV 3020BAL EV 3040BAL EV 4030BAL EV 2015BSS EV 3020BSS EV 4030BSS

Female

Description 2” Coupler x 2” Coupler 2” Coupler x 2” Coupler 2” Coupler x 3” Coupler 3” Coupler x 3” Coupler 3” Coupler x 3” Coupler 3” Coupler x 4” Coupler 4” Coupler x 4” Coupler 4” Coupler x 4” Coupler 4” Coupler x 6” Coupler 6” Coupler x 6” Coupler

Material Aluminum 316SS Aluminum Aluminum 316SS Aluminum Aluminum 316SS Aluminum Aluminum

Material Aluminum Aluminum Aluminum Aluminum Aluminum Aluminum Aluminum Aluminum

RETAIL $ 24.46 40.20 77.05 26.60 60.57 35.51 36.31 79.06 268.00 380.56

RETAIL $ 98.49 27.60 139.36 43.15 34.44 161.81 171.52 336.34

Female

Description 2” 90 Elbow, Coupler x Coupler 3” 90 Elbow, Coupler x Coupler 4” 90 Elbow, Coupler x Coupler 4” 90 Elbow, Coupler x Coupler

Material Aluminum Aluminum Aluminum Aluminum

Female

Part No. EV CAB150 EV CAB200 EV CAB300 EV CAB400 EV KRW20 EV KRW25 EV KRW35 EV KRW40

IND

Part No. EV 2015DAL EV 3020DAL EV 4030DAL EV 6040DAL EV 2015DSS EV 3020DSS EV 4030DSS

Part No. EV 2015EAL EV 3020EAL EV 4030EAL EV 2015ESS EV 3020ESS EV 4030ESS

Male

RETAIL $ 130.65 257.28 138.02 523.94

RETAIL $ 10.92 63.65 18.63 25.13 20.50 266.66 257.28 357.78

PART Coupler Male Thread

Description 2” Fem. Coupler x 1-1/2” Hose Shank 3” Female Coupler x 2” Hose Shank 3” Female Coupler x 4” Hose Shank 4” Female Coupler x 3” Hose Shank 2” Fem. Coupler x 1-1/2” Hose Shank 3” Female Coupler x 2” Hose Shank 4” Female Coupler x 3” Hose Shank

Material RETAIL Aluminum $ 15.28 Aluminum 17.49 Aluminum 26.67 Aluminum 26.26 Stainless 25.13 Stainless 45.43 Stainless 75.04

PART Shank Coupler

Description Material 2” Female Coupler x 1-1/2” FPT Aluminum 3” Female Coupler x 2” FPT Aluminum 4” Female Coupler x 3” FPT Aluminum 6” Female Coupler x 4” FPT Aluminum 2” Female Coupler x 1-1/2” FPT Stainless 3” Female Coupler x 2” FPT Stainless 4” Female Coupler x 3” FPT Stainless

RETAIL $ 10.72 15.34 22.45 289.44 160.80 249.24 357.78

PART Coupler

Female Thread

Female Coupling

Male Coupling

Part No. EV 1520FAL EV 2015FAL EV 2030FAL EV 3020FAL EV 3040FAL EV 4030FAL EV 2015FSS EV 3020FSS EV 4030FSS

Description 1-1/2” Male Adapter x 2” MPT 2” Male Adapter x 1-1/2” MPT 2” Male Adapter x 3” MPT 3” Male Adapter x 2” MPT 3” Male Adapter x 4” MPT 4” Male Adapter x 3” MPT 2” Male Adapter x 1-1/2” MPT 3” Male Adapter x 2” MPT 4” Male Adapter x 3” MPT D

Single End

Type Size RETAIL Complete Coupling....... 1-1/2" NPSH $ 9.18 Complete Coupling....... 2" NPSH 11.46 Complete Coupling....... 3" NPSH 24.66 Complete Coupling....... 4” NPSH 37.39 Buna Gasket................ 1-1/2" 0.27 Buna Gasket................ 2" 0.27 Buna Gasket................ 3" 0.54 Buna Gasket................ 4” 0.80

(800) 228-9666

Description Material RETAIL 2” Male Adapter x 1-1/2” Hose Shank Aluminum $ 6.19 3” Male Adapter x 2” Hose Shank Aluminum 10.52 4” Male Adapter x 3” Hose Shank Aluminum 17.42 2” Male Adapter x 1-1/2” Hose Shank Stainless 24.59 3” Male Adapter x 2” Hose Shank Stainless 45.16 4” Male Adapter x 3” Hose Shank Stainless 384.58

PART Shank Adapter

Part FAL (Aluminum) Part FSS (Stainless)

DD90

DULTMEIER SALES • OMAHA, NE

Description Material 2” Female Coupler x 1-1/2” MPT Aluminum 2” Female Coupler x 3” MPT Aluminum 3” Female Coupler x 2” MPT Aluminum 3” Female Coupler x 4” MPT Aluminum 4” Female Coupler x 3” MPT Aluminum 2” Female Coupler x 1-1/2” MPT Stainless 3” Female Coupler x 2” MPT Stainless 4” Female Coupler x 3” MPT Stainless

Part EAL (Aluminum) Part ESS (Stainless)

Pin Lug Couplings

Complete Coupling

Female Thread

Female

DA90

Aluminum with Brass Nuts & Buna Gaskets for Water Service

PART Adapter

Part DAL (Aluminum) Part DSS (Stainless)

Part DD Elbow Female x Female (Aluminum) Part No. EV 200DD-90AL EV 300DD-90AL EV 400DD-90AL EV 600DD-90AL

Part No. EV 2015CAL EV 3020CAL EV 3040CAL EV 4030CAL EV 2015CSS EV 3020CSS EV 4030CSS

Male

Part DA Elbow Female x Male (Aluminum) Part No. Description EV 150DA90 1-1/2” 90 Elbow, Coupler x Adapter EV 200DA90 2” 90 Elbow, Coupler x Adapter EV 200DA45AL 2” 45 Elbow Coupler x Adapter EV 300DA90 3” 90 Elbow, Coupler x Adapter EV 300DA45AL 3” 45 Elbow, Coupler x Adapter EV 400DA90 4” 90 Elbow, Coupler x Adapter EV 400DA45AL 4” 45 Elbow, Coupler x Adapter EV 600DA90 6” 90 Elbow, Coupler x Adapter

RETAIL $ 6.06 14.34 9.98 13.94 16.42 24.52 26.60 149.75 170.18 213.06 363.14

Part CAL (Aluminum) Part CSS (Stainless)

Part DD Straight (Aluminum) DDSS (316SS) Part No. EV 200DD EV 200DDSS EV 2030DD EV 300DD EV 300DDSS EV 3040DD EV 400DD EV 400DDSS EV 4060DD EV 600DD

Material Aluminum Aluminum Aluminum Aluminum Aluminum Aluminum Aluminum Stainless Stainless Stainless Stainless

Part BAL (Aluminum) Part BSS (Stainless)

Part DA (Aluminum) Part DASS (316SS) Part No. EV 1520DA EV 2015DA EV 2030DA EV 2030DASS EV 3020DA TK 303B200A EV 3020DASS EV 3040DA EV 4020DA EV 4030DA EV 4060DA EV 6030DA EV 6040DA

Description 2” Male Adapter x 1-1/2” FPT 2” Male Adapter x 3” FPT 3” Male Adapter x 2” FPT 3” Male Adapter x 4” FPT 4” Male Adapter x 3” FPT 4” Male Adapter x 6” FPT 6” Male Adapter x 4” FPT 2” Male Adapter x 1-1/2” FPT 2” Male Adapter x 3” FPT 3” Male Adapter x 2” FPT 4” Male Adapter x 3” FPT

SW15 Double End

Part No. EV SW15 EV SW20 EV SW30 EV SW40 EV G10 •

www.dultmeier.com

Material Aluminum Aluminum Aluminum Aluminum Aluminum Aluminum Stainless Stainless Stainless

RETAIL $ 34.17 7.24 8.78 10.92 16.01 20.17 282.74 294.80 235.84

PART Adapter

Pin Lug Spanner Wrenches - Plated Iron -

Description RETAIL Spanner Wrench - Double End, 1-1/2”,2-1/2” & 3”........ $ 21.57 Spanner Wrench, Single End, 2”..................................... 3.36 Spanner Wrench, Single End, 3”..................................... 5.32 Spanner Wrench, Single End, 4”..................................... 7.24 Pin Lug Wrench for Tank Car Fittings.............................. 85.09 • DAVENPORT, IA

(800) 553-6975

E0353

Aluminum Lever Couplings & Accessories

Aluminum Lever Couplings

Gasket Shims

The lever couplings listed below are supplied with Stainless Steel or Brass handles as noted. Buna gaskets standard. Operating Pressures: 3/4” to 4” is 150 PSI and 5” to 6” is 75 PSI. (Handles & gaskets options shown on the right)

Female Thread

Male Thread

D D

PART Adapter

Dust Cap

for Male Adapter

Dust Plug for Female Coupler D

* Brass Cams

Size RETAIL *1-1/2" $ 52.93 2” 20.84 3” 33.50 4” 61.64 *6” 340.36

* Brass Cams

Part No. EV 150D90 EV 200D90 EV 300D90 EV 400D90 EV 600D90

Size *1-1/2" *2” *3” *4” *6”

D90

90° Coupler X FPT Elbow

F90

90° Adapter X MPT Elbow

IND

Part No. Material TF HPR-1A Stainless Steel EV HPR-1 Stainless Steel EV HPR-15 Stainless Steel EV HPR-1-1/2 Stainless Steel EV HPR-3 Stainless Steel EV HPR-6 Stainless Steel FC HA-1-1/2 Delrin FC HA-3 Delrin

Available in EPDM, Buna-N and Viton® materials and in standard and extra thick. Buna-N is generally used for petroleum products while EPDM & Viton® are for Ag Chemicals.

RETAIL $ 57.35 26.80 57.89 111.22 234.50

(800) 228-9666

Coupler O.D. Size Pin RETAIL 1/2" & 3/4" 5/32" $ 2.43 3/4" & 1" 3/16" 4.02 1” 7/32” 2.43 1-1/2" & 2" 1/4" 3.50 3" & 4" 5/16" 5.12 6” 5/16” 11.99 1-1/2" & 2" 1/4" 3.66 3" 5/16" 5.12

Gaskets for Lever Couplings

Part No. Size RETAIL EV 150F90 1-1/2" $ 45.23 EV 200F90 2” 69.01

DULTMEIER SALES • OMAHA, NE

Delrin

Stainless Steel Handle, Ring & Pin for use with Aluminum, Stainless & Cast Iron and polypropylene and nyglass couplings. Delrin Handle made from blended high-strength Delrin plastic compound. For use with Ny-Glass Couplings.

Part No. Size RETAIL EV DP-1AL 1" $ 2.43 EV DP-1-1/2AL 1-1/2” 2.69 EV DP-2AL 2" 4.52 EV DP-3AL 3" 7.04 EV DP-4AL 4" 10.79 EV DP-6AL 6" 18.89

Part No. EV 150C90 EV 200C90 EV 300C90 EV 400C90 EV 600C90

C90

RETAIL $ 9.31 9.85

Stainless Steel

Part No. Size RETAIL EV 150A90 1-1/2" $ 53.27 EV 200A90 2” 32.29 EV 300A90 3” 89.78 EV 400A90 4” 163.48

A90

90° Coupler X Shank Elbow

Part No. Size RETAIL EV DC-1AL SS Cams 1" $ 7.57 EV DC-1-1/2AL SS Cams 1-1/2" 9.31 EV DC-2AL SS Cams 2" 7.44 EV DC-3AL SS Cams 3" 16.62 EV DC-4AL SS Cams 4" 21.44 EV AL-DC200 Brass Cams 2" 7.30 EV AL-DC300 Brass Cams 3" 11.79 EV AL-DC400 Brass Cams 4" 16.01 EV DC-6AL Brass Cams 6” 34.97

Not for Pressure Applications

Pin O.D. 1/4" 5/16"

Handles with Ring & Pin

Part No. Size RETAIL EV F-1AL 1” $ 2.89 EV F-1-1/2AL 1-1/2" 4.25 EV F-2AL 2" 5.00 EV F-3AL 3" 9.78 EV F-4AL 4" 14.34 EV F-6AL 6" 32.43

Male Thread

90° Adapter X FPT Elbow

Part No. Coupler Size TF HKL-1-1/2 Stainless Lock Handle 1-1/2 & 2" TF HKL-3 Stainless Lock Handle 3" & 4"

Part No. Size RETAIL EV E-1AL 1" $ 3.08 EV E-1-1/2AL 1-1/2” 4.17 EV E-2AL 2" 5.52 EV E-3AL 3" 8.78 EV E-4AL 4" 14.74 EV E-6AL 6" 36.31

PART Hose Shank Adapter

These all stainless locking handles are interchangeable on stainless and aluminum lever couplers. Couplers can be ordered with this lock handle as standard.

Part No. Size RETAIL EV D-3/4AL SS Cams 3/4" $ 9.11 EV D-1AL SS Cams 1" 8.64 EV D-1-1/2AL SS Cams 1-1/2" 9.72 EV D-2AL SS Cams 2" 11.46 EV D-3AL SS Cams 3" 19.56 EV D-4AL SS Cams 4" 26.80 EV AL-D300 Brass Cams 3" 13.80 EV AL-D400 Brass Cams 4" 19.23 EV D-6AL Brass Cams 6” 38.46

PART Coupler Female Thread

Replacement Stainless Locking Handles

Part No. Size RETAIL EV C-1AL SS Cams 1" $ 7.77 EV C-1-1/2AL SS Cams 1-1/2” 9.31 EV C-2AL SS Cams 2" 9.25 EV C-3AL SS Cams 3" 17.89 EV C-4AL SS Cams 4" 27.60 EV AL-C400 Brass Cams 4" 18.69 EV C-6AL Brass Cams 6” 47.17

PART Hose Shank Coupler

Part No. Couping Size RETAIL FC 075SHIM 3/4" $ 0.27 FC 100SHIM 1" 0.40 FC 150SHIM 1-1/2" 0.54 FC 200SHIM 2" 0.67 FC 300SHIM 3" 1.35 FC 400SHIM 4" 1.89

Part No. Size RETAIL EV B-1AL SS Cams 1" $ 9.58 EV B-1-1/2AL SS Cams 1-1/2” 10.72 EV B-2AL SS Cams 2" 11.32 EV B-3AL SS Cams 3" 17.02 EV B-4AL SS Cams 4" 23.99 EV AL-B200 Brass Cams 2" 8.44 EV AL-B300 Brass Cams 3" 17.49 EV AL-B400 Brass Cams 4" 18.56 EV B-6AL Brass Cams 6” 32.29

PART Coupler

1/32" Thick Polypropylene Shims are used to create a tight seal when working with loose & worn couplings.

Part No. Size RETAIL EV A-3/4AL 3/4" $ 2.48 EV A-1AL 1" 2.59 EV A-1-1/2AL 1-1/2" 3.43 EV A-2AL 2" 3.56 EV A-3AL 3" 5.92 EV A-4AL 4" 10.25 EV A-6AL 6" 23.12

PART Adapter

•

Part No. Size Material Thickness RETAIL EV 50GBU 1/2” Buna-N Standard CALL EV 50GVI 1/2” Viton® Standard CALL FC 75GBU 3/4" Buna-N Standard $ 0.23 FC 75G 3/4" EPDM Standard 0.29 TK 075GXT 3/4" EPDM Extra Thick 1.35 EV 100GBU 1" & 1-1/4" Buna-N Standard 0.29 FC 100G 1" & 1-1/4" EPDM Standard 0.39 TK 100GV 1” Viton® Standard 2.63 TK 100GXT 1" & 1-1/4" EPDM Extra Thick 1.49 EV 150GBU 1-1/2" Buna-N Standard 0.39 FC 150G 1-1/2" EPDM Standard 0.78 TK 150GV 1-1/2" Viton® Standard 4.65 TK 150GXT 1-1/2" EPDM Extra Thick 1.62 EV 200GBU 2" Buna-N Standard 0.54 FC 200G 2" EPDM Standard 0.94 TK 200GV 2" Viton® Standard 5.92 EV X200GBU 2" Buna-N Extra Thick 1.01 TK 200GXT 2" EPDM Extra Thick 1.89 TK 200GXTV 2" Viton® Extra Thick 17.55 EV 250EPR 2-1/2" EPDM Standard 0.80 EV 250GVI 2-1/2” Viton® Standard 7.04 EV 300GBU 3" Buna-N Standard 0.80 FC 300G 3" EPDM Standard 1.21 TK 300GV 3" Viton® Standard 9.72 EV X300GBU 3" Buna-N Extra Thick 1.49 TK 300GXT 3" EPDM Extra Thick 2.56 TK 300GXTV 3" Viton® Extra Thick 26.13 EV 400GBU 4" Buna-N Standard 1.14 FC 400G 4" EPDM Standard 2.09 EV 400GVI 4” Viton® Standard 13.74 EV X400GBU 4" Buna-N Extra Thick 2.36 Viton® is a registered trademark of DuPont Performance Elastomers

www.dultmeier.com

• DAVENPORT, IA

(800) 553-6975

E0352

Couplings & Connectors • Safety Bumps Rail Car Connectors

Safety “Bumps”™ for Camlock Hose Ends

Standard with 5" RR Tank Thread & Buna Gaskets D D

Style S

(Hose Barb)

Style T (MPT)

Straight Adapter

A great alternative to traditional cam & groove camlock plugs & adapters caps. Safety Bumps include a large comfortable handle and a “bump” that extends beyond the coupler handles to protect the ears & other surfaces from damage. Very tough & durable: constructed of glass-filled polypropylene; tested to 1,000 drops from a 6’ height.

(Male Cam)

Style A

FEATURES:

(Male Cam)

• Extends life of expensive camlock couplers & adapters by protecting them from dropping or transport damage.

ANGLED CONNECTORS Part No. Style Size RETAIL EV ATCS30 Type “S” Aluminum....... 3" $ 179.23 EV ATCS40 Type “S” Aluminum....... 4" 278.72 EV TCT30 Type “T” Malleable Iron. 3" 194.30 EV TCT40 Type “T” Malleable Iron. 4" 234.50 EV ATCT30 Type “T” Aluminum........ 3" 214.40 EV ATCT40 Type “T” Aluminum........ 4" 265.32 EV RTCA30 Type "A" Stainless........ 3" Cam 594.96 EV RTCA40 Type "A" Stainless........ 4" Cam 742.36 EV RTCA40-A Type “A” Aluminum....... 4” Cam 219.76

• Much better control for driver’s including better hand protection. • Standard Models (Blue) are for use with water, fertilizer, oils and other non-flammable liquids compatible with Polypropylene & Viton®. • Petrochemical Models (Black) are compatible with all petrochemical products including alcohols as well as many chemicals & corrosive liquids (includes anti-static additive). • Premium gaskets (Viton® equivalent) & zinc-plated pins.

STRAIGHT ADAPTERS Size EV 300TCAAL Aluminum Cam.......... - $ 88.44 EV 500GTAF1 Fiber Gasket .............. - 6.19 EV 500GTABU Buna N Rubber Gasket * - 4.82 * Viton® & Teflon Gaskets Also Available.

• Food grade Models also available (White). • Safety Locks shown below are economical and superior to Velcro Straps for preventing camlock coupler ears from opening when connected.

— Other Models Available —

Dixon EZLink™ Armless Cam & Groove Couplers

STANDARD MODELS Blue - for use with Water, Fertilizer, Oils and other Non-Flammable Products: Part No. Description RETAIL

Push-to-Connect, Low Profile, Positive Locking System and More!

SB M2S SB M3S SB M4S SB F2S SB F3S SB F4S

APPLICATIONS: • Transfer and/or unloading of fuels (gasoline or diesel) from tank truck to storage tanks. • Transfer of water and solutions compatible with aluminum and Buna-N rubber.

Couplings and dust caps are A356 aluminum (Stainless steel also available). Coupler tabs and springs are 316 stainless steel. Gaskets are Buna-N. Features: Automatic couplers push-to-connect providing a reliable connection • Low profile allows easy connection and disconnection in tight applications • Safe: Coupler tabs cannot be pushed to disconnect when pressurized to 20 PSI or greater • Maximum working pressure with band clamps is 100 PSI. Note: Only use EZ Link™ gaskets for this coupling system. Traditional cam and groove gaskets, or other types of seals are not compatible and will fail.

Replaceable Tabs Requires Special Buna Gaskets Stainless Available

2” Male Plug 3” Male Plug 4” Male Plug 2” Female Cap 3” Female Cap 4” Female Cap

PETRO-CHEMICAL MODELS Black with Anti-Static Additive: Part No. Description

SB M2 SB M3 SB M4 SB F2 SB F3 SB F4

2” Male Plug 3” Male Plug 4” Male Plug 2” Female Cap 3” Female Cap 4” Female Cap

$ 11.99 18.09 27.60 16.88 27.07 31.76

Male Plug

RETAIL

$ 15.28 26.00 36.45 20.10 33.23 39.13

Female Cap

SAFETY LOCKS™ Part No. Description

RETAIL

SB SL2 SB SL3 SB SL4

$ 3.03 3.63 4.72

2” Safety Lock 3” Safety Lock 4” Safety Lock

(See Tabs & Gaskets Below) EZLink™ Shank Coupler

EZLink™ Dust Cap

Find Us on Facebook and Twitter

Part No. Description RETAIL EZ L200-C-AL 2” Coupler X Hose Shank, Aluminum......... $ 36.85 EZ L200-DC-AL 2” Dust Cap, Aluminum............................... 31.36 EZ L300-C-AL 3” Coupler X Hose Shank, Aluminum......... 49.25 EZ L300-DC-AL 3” Dust Cap, Aluminum............................... 38.19 EZ L400-C-AL 4” Coupler X Hose Shank, Aluminum......... 64.99 EZ L400-DC-AL 4” Dust Cap, Aluminum............................... 47.57 EZ LCL400 Optional Safety Clip. Fits 2”, 3” & 4”............ 1.21 EZ L200RPLKIT Repair Kit for 2”........................................... 13.53 EZ L300RPLKIT Repair Kit for 3” & 4”.................................... 16.35 EZ LG-200 2” Buna Gasket .......................................... 4.58 EZ LG-300 3” Buna Gasket........................................... 5.65 EZ LG-400 4” Buna Gasket........................................... 7.50 Viton® is a registered trademark of DuPont Performance Elastomers

IND

DULTMEIER SALES • OMAHA, NE

(800) 228-9666

•

www.dultmeier.com

• DAVENPORT, IA

(800) 553-6975

E0853

Cushion & Loop Clamps

Cushion Clamp Fittings are ideal for supporting multiple run lines. Absorbs shock and vibration, reduces unwanted noise. Allows for neat, organized runs. Clamps are designed for hose, pipe, copper water pipe or various types of tubing. Thermoplastic cushion protects run lines and increases service life. Clamps or bolts secure the lines to vertical or horizontal mounting surfaces. 2-Part design features thermoplastic cushion and steel clamp, (stainless also available). Standard clamps feature an electrodichromate finish for added corrosion resistance. Cushions are rated to temperatures from -50° F. to +275° F.

Cush-A-Clamp®

Omega Series™

CUSH-A-CLAMP Series: “Channel” mounted clamp assemblies. Designed to attach run lines to any standard 1-5/8" wide channel mounted to wall, ceiling or floor. Clamp cushion assemblies then hold run line in place. Available in sizes from 1/4" to 6". Rated from -50° to +275° F.

OMEGA Series Cushion Clamps: These assemblies are designed to mount to any flat surface. Channel is not required thus reducing cost and space requirements. Assemblies include thermoplastic cushion and clamp with electrodichromate finish. Rated from -50° to +275° F.

Clamp & Cushion Assemblies For Hose & Pipe, (Not Copper)

Part No.

“Controlled Squeeze” Shoulder Bolt

Living Hinge for Hose / Steel Pipe D

ZS 009N012 ZS 010T014 ZS 011N014 ZS 012T016 ZS 014N018 ZS 017N022 ZS 020T024 ZS 021N026 ZS 027N032 ZS 030N034 ZS 038N044

**Std Pkg

*1/4" .54" 1/4" .62" *3/8" .67" 3/8" .75" *1/2" .84" *3/4" 1.05" 1" 1.25" *1" 1.31" *1-1/4" 1.66" *1-1/2" 1.90" *2" 2.37"

RETAIL

5 $ 2.69 5 2.63 5 2.63 5 2.83 5 3.23 5 3.43 5 4.11 10 4.85 10 6.32 10 7.17 10 12.26

CUSH-A-CLIP Series: An economical, simple clamping system for tubing only. One-piece design for easy installation. Black nylon construction. Fits Standard 1-5/8" wide Channel. Rated from -40° to +275° F. Tubing Size Part No. O.D.

RETAIL

5 $ 2.96 5 2.96 5 2.96 5 3.30 5 3.63

** 10% Discount for Standard Package Purchase.

Tubing/Pipe Copper Part No. O.D Nominal

ZS 004T008 1/4" ZS 006T010 3/8" ZS 008T012 1/2" ZS 010T014 5/8" ZS 012T016 3/4" ZS 014T018 7/8”

** Std. Pkg.

ZS RPC6 3/8" ZS RPC8 1/2" ZS RPC10 5/8" ZS RPC12 3/4" ZS RPC14 7/8"

For Tubing or Copper Water Pipe - 1/4" 3/8" 1/2" 5/8" 3/4”

**Std Pkg

Loop Clamps

25 $3.30 25 3.30 25 3.30 25 3.77 25 3.70 25 4.45

Steel Clamps with bolt ONLY, NO Cushion (For Channel Mounting) Part No. Pipe Size RETAIL KE PS200EH - Galvanized Channel, 20 ft. $ 93.13 KE B2010 1” 1” Pipe Clamp................ 3.10 KE B2011 1-1/4” 1-1/4” Pipe Clamp.......... 4.58 KE B2012 1-1/2” 1-1/2” Pipe Clamp.......... 2.56 KE B2013 2" 2” Pipe Clamp................ 2.63 KE B2015 3" 3” Pipe Clamp................ 3.90 KE B2017 4" 4” Pipe Clamp................ 4.65 KE B2020 6" 6” Pipe Clamp................ 8.51 - Stainless Clamps Also Available DULTMEIER SALES • OMAHA, NE

Plated Steel 1/2” Wide

RETAIL

**10% Discount for standard package purchase.

IND

- - 1/4" 3/8" - 1/2" 3/4" 1" 1-1/4" 1-1/2" 2"

Cush-A-Clip Series Clamps

25 $ 3.30 25 3.77 25 3.56 25 3.70 25 4.52 25 5.19 20 5.79 10 5.92 10 8.11 10 8.91 10 14.41

* Nominal Pipe Sizes **10% Discount for Standard Package Purchase.

- 1/4" 3/8" 1/2" 5/8" 3/4" - - - - -

* Nylon, Copper, Stainless, etc. **10% Discount for standard package purchase.

For Hose & Pipe Hose/Pipe ID OD

Tubing Copper Other *Types Pipe Pipe O.D. Nominal Nominal ** Std. Pkg

ZS 004M007 1/4" ZS 006M008 3/8" ZS 008M011 1/2" ZS 010M013 5/8" ZS 012M015 3/4" ZS 014M017 7/8" ZS 018M020 - ZS 021M026 - ZS 027M032 - ZS 030M034 - ZS 038M044 -

Part No.

(800) 228-9666

Light to Medium Duty Steel Loop Clamps can be slipped over tube, wire, hose and then closed with a bolt assembly, (not included). Bolt holes provide easy alignment. EPDM cushion wrap adds insulation and vibration reduction. Zinc-plated steel for added corrosion resistance. Temperature range is -50° to +275° F. All clamps are 1/2” wide. (Stainless clamps are also available). Loop Clamps * Std. Part No. Size Pkg. RETAIL

Loop Clamps * Std. Part No. Size Pkg. RETAIL

ZS SPN4 1/4" 100 $ 0.94 ZS SPN5 5/16” 100 0.87 ZS SPN6 3/8” 100 0.87 ZS SPN7 7/16” 100 0.87 ZS SPN8 1/2” 100 0.87 ZS SPN9 9/16” 100 1.01 ZS SPN10 5/8” 100 1.01

ZS SPN11 11/16” 50 $ 1.01 ZS SPN12 3/4” 50 1.01 ZS SPN14 7/8” 50 0.94 ZS SPN16 1” 50 1.01 ZS SPN18 1-1/8” 50 1.42 ZS SPN20 1-1/4” 50 1.49 ZS SPN24 1-1/2” 50 1.96

* 10% Discount for Std Pkg. Purchase.

•

www.dultmeier.com

• DAVENPORT, IA

(800) 553-6975

E0333

Cushion Clamps • Mounting Channel Beta Clamps

Cush-A-Claw™ Clamping System The Cush-A-Claw Clamps are designed to grab and hold pipe, tube, conduit or hose securely in place. Patented design allows for quick, simple and easy installation. TPE materials will not rust. Non-conducting. Rated from -50° to +275° F. Can be used for indoor or outdoor applications. 75 lb. load limit, (Safety factor 3). Available in Two Styles: Strut Mount, twist and lock clamps are for use with steel or stainless channel. Surface Mount clamps have a counter-sunk center hole for #10 screw mounting to any flat surface.

Beta Standard Assembly

Standard Series Beta Clamps are ideal for clamping pipe, tube, hose or electric cable. Unique clamp design offers hock absorption, vibration dampening and noise reduction. Rated up to 1500 PSI without dynamic loads. (Heavy duty models available for operations with pressure surges and wide temperature fluctuations).

75 lbs. Load (safety Factor 3)

ZS S1004S ZS S1006S ZS S1007S ZS S2008S ZS S2009S ZS S2010S ZS S2011S ZS S3012S ZS S3014S ZS S3015S ZS S3016S ZS S4017S ZS S4018S ZS S5020S ZS S5021S ZS S5024S ZS S5027S ZS S6028S ZS S6030S

Strut Style

Surface Style

(2) Hex Bolts

(1) Cover Plate

(1) Cushion Assembly

Clamp assemblies include hex bolts, cushions and weldable steel bases. (Z-Strut and Din Rail bases also available). Polypropylene cushions are rated from -20° to +195° F.

Pipe/Tubing Part No. O.D. Tube Size

1/4” (.250) 3/8” (.375) - 1/2” (.500) - 5/8” (.625) - 3/4” (.750) - 7/8” (.875) 1” (1.00) - 1-1/8” (1.125) 1-1/4” - 1-1/2” (1.500) - 1-3/4” (1.750) -

(1) Weld Plate

O.D. Pipe Size

- - 1/8” (.405) - 1/4” (.540) - 3/8” (.675) - 1/2” (.840) - - 3/4” (1.050) - - 1” (1.315) - 1-1/4” (1.660) - 3/4” (1.900)

RETAIL

$ 3.43 3.43 3.43 3.63 3.63 3.63 3.30 4.18 4.18 4.18 4.25 4.65 4.65 5.19 5.19 5.19 5.19 7.17 7.17

* NOTE: 10% Discount for 50+ Assorted Clamps on order. 15% Discount on 100+ Assorted.

Alpha Series™ Cushion Clamps Alpha Series Cushion Clamps: U-bolt assembly secures pipe runs to any flat surface. U-bolts can be used as a full contact hanger. Assemblies consist of Thermoplastic Cushion and Electro-galvanized U-bolt with nylon insert locknuts. Stainless bolts also available. Nominal

Strut Mount Cush-A-Claw

Hose/Pipe/Tubing ** Std. Part No. O.D. Size Pkg. ** RETAIL

ZS CL4 1/4” 50 $ 1.21 ZS CL6 3/8" 50 1.14 ZS CL8 1/2” 50 1.42 ZS CL10 5/8” 25 1.62 ZS CL12 3/4” 25 1.62 ZS CL14 7/8” 25 1.29 ZS CL18 1-1/8” 20 1.55

Part No.

1/2” 3/4” 1”

25 25 20

1.01 1.07 1.27

** 10% Discount for Std Pkg. Purchase.

Mounting Channel Struts

Surface Mount Cush-A-Claw

Hose/Pipe/Tubing ** Std. Part No. O.D. Size Pkg. ** RETAIL

ZS CLS4 1/4” ZS CLS6 3/8" ZS CLS8 1/2” ZS CLS10 5/8” ZS CLS12 3/4” ZS CLS14 7/8” ZS CLS18 1-1/8” 1/2” 3/4” 1”

50 $ 1.07 50 1.21 50 1.27 25 1.62 25 1.23 25 1.55 20 1.62 25 25 20

1-5/8" High

0.87 0.94 1.62

** 10% Discount for Std Pkg. Purchase.

IND

DULTMEIER SALES • OMAHA, NE

(800) 228-9666

Mounting Channel is available in 1-5/8" wide x either 13/16" or 1-5/8" high. Construction is either Painted carbon steel or Galvanized steel. (Stainless steel also available).

EMT Conduit ZS EMTS12 ZS EMTS34 ZS EMTS1

RETAIL

ZS UB12PA 1/2" $ 11.06 ZS UB34PA 3/4" 11.86 ZS UB1PA 1" 12.40 ZS UB114PA 1-1/4" 14.74 ZS UB112PA 1-1/2" 16.21 ZS UB2PA 2" 17.69 ZS UB3PA 3" 23.99 ZS UB4PA 4" 27.60 ZS UB6PA 6" 54.54

EMT Conduit ZS EMT12 ZS EMT34 ZS EMT1

Pipe Size

Channel is designed to be mounted to horizontal or vertical surfaces. Clamps then hold pipe, hose or tubing securely to the channel.

Part No.

Channel Only

Width

Height

Length

RETAIL

ZS Z-1000 ZS Z-3000 KE PS200EH

Painted Steel Painted Steel Galvanized

1-5/8" 1-5/8" 1-5/8"

1-5/8" 13/16" 1-5/8"

2' 2' 20'

$ 35.78 5.32 93.13

5' and 10' lengths also available. •

13/16" High

www.dultmeier.com

• DAVENPORT, IA

(800) 553-6975

E0896

Tank Truck Manufacturer’s Assoc. (TTMA) Equipment

Tank Truck Flanges (TTMA) & Gaskets

Tank Truck Flange (TTMA) x Cam Couplers & Adapters Standard with Buna Gaskets (Viton® Available)

Nominal Flange Diameter of Number of Diameter of Diameter of Pipe Size O.D. Thickness* Bolt Circle Bolts Bolt Holes Bolts 3” 5-5/8” 3/8” 4-7/8” 8 7/16” 3/8” 4” 6-5/8” 3/8” 5-7/8” 8 7/16” 3/8” 6” 8-7/8” 3/8” 8-1/8” 12 7/16” 3/8” * Listed thickness is for Aluminum flanges.

400DLTAL

40022ALTAL

Weld

40022DLTAL

Part No. Description RETAIL VV TTF3-S 3” TTMA Flange, Steel........................... $ 7.71 VV TTF4-S 4” TTMA Flange, Steel........................... 8.78 VV TTF6-S 6” TTMA Flange, Steel *........................ 22.91 VV TTF3-A 3” TTMA Flange, Aluminum.................. 14.41 VV TTF4-A 4” TTMA Flange, Aluminum.................. 16.35 VV TTF6-A 6” TTMA Flange, Aluminum.................. 22.38 * Weld Neck Flange.

Viton® is a registered trademark of DuPont Performance Elastomers

Part No. RETAIL VV 300ALTAL 3” Aluminum TTMA Flange x 3” Male Cam.................. $ 21.98 VV 400ALTAL 4” Aluminum TTMA Flange x 4” Male Cam.................. 26.13 VV 600ALTAL 6” Aluminum TTMA Flange x 6” Male Cam.................. 56.68 VV 300ALTSS 3” Stainless TTMA Flange x 3” Male Cam................... 345.72 VV 400ALTSS 4” Stainless TTMA Flange x 4” Male Cam................... 510.54 EV 40022ALTAL 4” Aluminum TTMA Flange x 4” Male Cam Adapter with 22-1/2” Angle........................................................ 136.68 EV 300DLTAL 3” Aluminum TTMA Flange x 3” Female Cam Coupler. 56.28 EV 400DLTAL 4” Aluminum TTMA Flange x 4” Female Cam Coupler. 70.35 EV 600DLTAL 6” Aluminum TTMA Flange x 6” Female Cam Coupler. 90.45 EV 40022DLTAL 4” Aluminum TTMA Flange x 4” Female Cam Coupler. with 22-1/2” Angle........................................................ 113.23

All Acrylic

Threaded

Part No. VV TTF3-AT VV TTF4-AT VV TTF6-AT VV TTF3-ST VV TTF4-ST VV TTF6-ST VV TTF3-ATM VV TTF4-ATM VV TTF3-STM VV TTF4-STM

Description 3” TTMA Flange x 3” FPT, Aluminum... 4” TTMA Flange x 4” FPT, Aluminum... 6” TTMA Flange x 6” FPT, Aluminum... 3” TTMA Flange x 3” FPT, Steel............ 4” TTMA Flange x 4” FPT, Steel............ 6” TTMA Flange x 6” FPT, Steel............ 3” TTMA Flange x 3” MPT, Aluminum.. 4” TTMA Flange x 4” MPT, Aluminum.. 3” TTMA Flange x 3” MPT, Steel........... 4” TTMA Flange x 4” MPT, Steel...........

Part No. Description RETAIL VV TTFG3-B 3” TTMA Cork Buna Gasket................. $ 1.62 VV TTFG4-B 4” TTMA Cork Buna Gasket................. 2.09 VV TTFG6-B 6” TTMA Cork Buna Gasket................. 10.39 * Viton® Gaskets also available in 3” & 4”;Teflon Gaskets available in 3”, 4” & 6”.

Economical yet durable acrylic material. Fits between standard tank truck flanges (TTMA). Use with tank truck flange gaskets. RETAIL $ 95.14 63.38 337.68

Aluminum

Tank Truck (TTMA) Butterfly Valves

* Has 8 Bolt Holes - For 12 Hole Versions Order TTFSG6-12

4” Tank Truck Flange Sight Flow Indicators Tank Truck Flange Sight Flow Indicators with rugged cast aluminum housing for extra durability. Plexiglas interior. Fits between standard 4” tank truck flanges (TTMA). Buna gaskets are standard (Viton® also available). D

Part No. EV 400SFIAL 4” Sight Glass * 4” diameter x 3-1/4” wide EV 5200SFI 4” Sight Glass 4” diameter x 1-3/4” wide * Extra Wide for Easier Viewing.

RETAIL

Tank Truck Weld Fittings Part No. VV 2ASR VV 2ALR VV 3ASR VV 3ALR VV 4ASR VV 4ALR

Tees:

VV 2ATLR VV 3ATSR VV 3ATLR VV 4ATSR VV 4ATLR

IND

These aluminum valves fit between standard tank truck flanges (TTMA). Viton® coated steel discs. Rated to 75 PSI and 400˚ F. Use TTMA gaskets on each side of valve - see gaskets above.

Part No. Description RETAIL VV TTV3A-Z 3” Aluminum TTMA Valve *..... $ 187.27 VV TTV4A-Z 4” Aluminum TTMA Valve *..... 233.16 VV TTV6A 6” Aluminum TTMA Valve........ 511.88 * Includes Grease Zirc

$ 190.28 128.64

Aluminum Elbows:

RETAIL $ 14.94 19.43 381.90 62.04 94.47 265.32 23.58 24.92 52.93 65.39

Gaskets

Tank Truck Sight Glass

Part No. VV TTFSG3 3” Sight Glass VV TTFSG4 4” Sight Glass VV TTFSG6 6” Sight Glass *

TTF3-ATM

TTMA FLANGE DIMENSIONS

300ALTAL

D D

• Weld & Threaded • Steel & Aluminum • Male & Female

Aluminum TTMA

Flanged Gate Valves

Belled Ends

Meets Gate Valve CID A-A-59379 with TTMA flanges Description RETAIL and quick rising stem hand wheel operation. Used in 2” Aluminum Elbow, Short Radius.......... $ 35.11 water or fuel systems. Available in anodized finish. 2” Aluminum Elbow, Long Radius........... 25.86 3” Aluminum Elbow, Short Radius.......... 37.79 Construction Details 3” Aluminum Elbow, Long Radus............ 37.12 4” Aluminum Elbow, Short Radius.......... 53.20 Body: Aluminum Bonnet: Aluminum 4” Aluminum Elbow, Long Radus............ 52.26 Stem: Brass Discs: Brass 2” Aluminum Tee, Long Radius............... 36.72 3” Aluminum Tee, Short Radius.............. 54.27 3” Aluminum Tee, Long Radius............... 60.03 4” Aluminum Tee, Short Radius.............. 95.81 4” Aluminum Tee, Long Radius............... 105.86 DULTMEIER SALES • OMAHA, NE

(800) 228-9666

Part No. MB 235RF-3 MB 235RF-4 MB 235RF-6 •

www.dultmeier.com

Description RETAIL 3” Aluminum Gate Valve $ 723.60 4” Aluminum Gate Valve 929.96 6” Aluminum Gate Valve. 1802.30 • DAVENPORT, IA

(800) 553-6975

E0730

Hydraulic Couplers & Adapters 8250-4

Decompression Nipple

MOST POPULAR AGRICULTURAL COUPLER The 8010 series male tips are recommended with this coupler

8250-4 Coupler is the most popular agricultural coupler. Allows connection of the female body to the male tip while either or both are under pressure. At time of connection, valves in both halves remain closed, opening only when system pressure has been relieved in the female body and then reapplied. The double-acting sleeve permits easy, one-handed connection to a clamp mounted female body. May be used with either open center or a closed center system that has a control valve. Pressures to 2500 PSI. Part No.

RETAIL

PA 8250-4 1/2" FPT Coupler, Less the male tip

$ 53.27

The 8010-4P-DC Decompression Nipple allows connection under residual pressure up to 3000 psi. Developed to overcome the difficulty of connecting implements or attachments with D residual pressure buildup. Simply insert this pressurized nipple into an unpressurized coupler. The pressurized nipple poppet pushes the coupler poppet open until it seats against the positive valve stop. The pressurized secondary nipple poppet then opens, releasing the pressurized fluid into the coupler. As the nipple has already sealed against the coupler, no fluid is lost. Once the residual pressure is released, the primary nipple opens. Both the nipple and coupler poppets then equalize allowing full flow through the coupling. Specifications: Steel body size of 1/2" • Rated pressure to 3000 PSI • Rated flow to 12 gpm • Temperature range (Buna-N) is -40° F. to +250° F. Part No.

4250-4 Coupler 4250-4 Coupler features a double acting sleeve for one-handed connection when the female body is clamp connected. System pressure must be relieved for connection. For pressures to 2500 PSI. Accepts a wide variety of male tips. Supplied Less the Male Tip.

PA 8010-4P-DC

RETAIL

Decompression Nipple.............. $ 25.73

Male Tips D

PA 4250-4 Coupler, 1/2" FPT, Less the Tip ................ $ 26.40

Connects with John Deere AR30210 and Pioneer 5060-15 male tips. Interchange for John Deere AR47331 female body, has single-acting sleeve. 2500 PSI.

Part No.

8010-4, 8010-15

5060-4 & 5060-15

Coupler Bodies

RETAIL

Part No. RETAIL

5070-4 & 5070-16

Part No. For Couplers: Tip Thread: RETAIL PA 8010-4 Pioneer 1/2" FPT ............... $ 10.59 PA DR10008 John Deere ISO* J.D. 3/4”-16 ORB... 11.26 PA 8010-15 Pioneer J.D. 3/4"-16 ORB .. 14.61 PA 5060-4 John Deere AR47331 1/2" FPT ............... 15.95 PA 5060-15 John Deere AR47331 3/4"-16 ORB ........ 16.88 PA 5070-4 Int’l Harvester 544788R1 1/2" FPT ............... 24.12 * DR10008 Connects With All J.D. & Pioneer ISO5675 Couplers.

PA 4056-15 Coupler body - John Deere 3/4"-16 ORB, Less Tip $ 41.88 PA 5060-15 Male Tip - John Deere - 3/4"-16 ORB................ 16.88 PA 4050-4 1/2" Female Coupler, Less Tip........................... 26.13

Adapters

9500 Series Lever Couplings D

ZERO PRESSURE Connection Coupler - Pressures to 2500 PSI • Connect or Disconnect at “zero Pressure” even with pressurized lines • Positively locks the valves in the open position • Accepts any male tip that meets the industry standard (Pioneer 8010) • Color coded levers identify raise and lower lines • Easily connect or disconnect with one hand (clamp mounted) • Eliminates spillage and spraying with no back flow checking

4070-4 Part No. PA 4060-4 PA 4065-4 PA 4065-4L PA 4070-4

4060-4

4065-4

4065-4L

Adapters RETAIL Pioneer Tip to John Deere Old Style Body........ $ 35.18 John Deere Old Style tip to Pioneer body......... 42.21 John Deere Old Style tip to John Deere 50, Ford ISO and 9250 Pioneer Bodies.................. 52.60 Pioneer Tip to Int’l Harvester Old Style Body..... 39.20

Accessories

5006-4 Double Break-Away Clamp with heavy duty metal stamping yoke. Clamp is specially designed for one hand disconnection of the 8200 coupling with full pressure on both halves. Just push in sharply and then remove the male tip. 5001-4 Single Break-Away Clamp for mounting one coupler. Fits 1-1/2" diameter sleeves.

9250-4

LEVER COUPLER (Less Male Tip)

Open Position, locks open the valves in the body and the tip, so they are unaffected by rapid variations in fluid flow. However, inadvertently turning the lever to open without the tip in place will not result in oil flow. Valves will close automatically in case of breakaway. Closed Position shuts off oil flow at the remote outlet, allowing for easy, sprayless, zero-pressure connecting or disconnecting.

9500-4 Coupling Kit Includes: (1 ea.) 9250-4L & 9250-4R Less Tips (1) 9006-4 double breakaway clamp (1) 9507-41H automatic dust cover.

(800) 228-9666

5001-4 5209-4M

5205-4 Part No.

RETAIL

PA 5001-4 Single Break-Away Clamp .................. $ 22.91 PA 5006-4 Double Break-Away Clamp ................. 24.79 PA 5205-4M Dust Plug. Rubber................................ 3.48 PA 5209-4M Dust Cap. Rubber................................ 3.48 PA 2-211 “O”Ring for 4200, 8200 & 9200............ 2.41

PA 9250-4L Left Hand (Yellow) Coupler ............................. $ 125.29 PA 9250-4R Right Hand (Red) Coupler .............................. 117.92 PA 9500-4 Complete Coupling Kit........................................ 286.76

DULTMEIER SALES • OMAHA, NE

5006-4

Rubber Dust Plugs and Caps keep dirt out of your equipment when coupler halves are disconnected.

Part No. RETAIL

IND

•

www.dultmeier.com

• DAVENPORT, IA

(800) 553-6975

E0492

Vacuum Fittings & Accessories

Vacuum End Plugs

Vacuum Couplers Zinc-Plated Steel Couplers for use with vacuum pipe applications. Also used to replace ends on steel tubing. Available in male or female styles as shown. Use with Bandlock® Lever Clamps. BL Style is for use with steel pipe, RLF Style is for use with aluminum pipe.

Male

Part No. Size BK BL5004P 4” BK BL5006P 6” BK BL5008P 8” BK BL5010P 10”

Female

Zinc-Plated Steel End Plugs for steel or aluminum couplers, adapters or tubes. Male design (Female also available). All plugs feature handle for easy removal. Wt. 2.0 lbs. 3 lbs. 4 lbs. 5 lbs.

RETAIL $ 107.87 181.24 184.59 239.86

FEMALE Part No. Size BK BL4FRP 4” BK BL5FRP 5” BK BL6FRP 6” BK RLF6 * 6” BK BL8FRP 8” BK RLF8 * 8” BK BL10FRP 10”

Style Female Female Female Female Female Female Female

Wt. 2.0 lbs. 2.5 lbs. 3.5 lbs. 2.0 lbs. 5.5 lbs. 2.5 lbs. 8.0 lbs.

RETAIL $ 44.49 66.20 56.01 52.26 73.03 73.70 106.53

Wt. 2.5 lbs. 3.0 lbs. 3.5 lbs. 2.0 lbs. 5.5 lbs. 2.5 lbs. 8.5 lbs.

RETAIL $ 35.78 65.79 40.74 46.50 58.02 58.02 85.76

Lock Ring Clamps Designed for use with vacuum fittings. Hinged style clamp ensures tight fit for positive sealing. Gaskets are not included. Regular clamps are for use with steel fittings. INT are for use with aluminum fittings.

* For Use with Aluminum Pipe.

MALE Part No. Size BK BL4MRP 4” BK BL5MRP 5” BK BL6MRP 6” BK RLM6 * 6” BK BL8MRP 8” BK RLM8 * 8” BK BL10MRP 10”

Style Male Male Male Male Male Male Male

* For Use with Aluminum Pipe.

Part No. BK BLB4 BK BLB5 BK BLB6 BK BLB6INT BK BLB8 BK BLB8INT BK BLB10 BK G04 BK G05 BK G06 BK G08 BK G10

Size RETAIL 4” Clamp $ 37.65 5” Clamp 77.05 6” Clamp 39.53 * 6” Clamp 44.22 8” Clamp 41.14 * 8” Clamp 43.55 10” Clamp 51.19 4” Gasket 8.51 5” Gasket 10.12 6” Gasket 12.40 8” Gasket 14.00 10” Gasket 27.34

* INT Clamps are for use with Aluminum Fittings

Vacuum Reducers Zinc-Plated Steel Reducers for use with vacuum hose applications. Can be used with hose or steel tubing. Use with Bandlock® lever clamps.

dultmeier.com

Part No. Size Wt. RETAIL BK BL364P 6” Male to 4” Female 6 lbs. $ 111.22 BK BL386P 8” Male to 6” Female 8 lbs. 136.35 BK BL3108P 10” Male to 8” Female 12 lbs. 218.42

Vacuum Elbows Zinc-Plated Steel Elbows for use with steel or aluminum couplers. Single or double wall as shown. (Double wall fittings are not plated).

• Shop and Order On-Line 24 Hours a Day, 7 Days a Week!

• Large Inventories of Over 2.2 Million Total Items!

90° Style Part No. Size BK BL2204P 4” BK BL2206P 6” BK BL2206DW * 6” BK BL2208P 8” BK BL2208DW * 8” BK BL2210P 10” BK BL2004P 4” BK BL2006P 6” BK BL2006DW * 6” BK BL2008P 8” BK BL2008DW * 8” BK BL2010P 10”

• View Current Pricing! Style 45° 45° 45° 45° 45° 45° 90° 90° 90° 90° 90° 90°

Wt. RETAIL 3 lbs. $ 196.65 5 lbs. 229.14 6 lbs. 280.06 7 lbs. 309.54 8 lbs. 333.66 13 lbs. 385.92 4 lbs. 227.80 7 lbs. 277.38 8 lbs. 326.96 10 lbs. 349.74 11 lbs. 400.66 13 lbs. 281.40

45° Style

• Web Specials and Bargain Corner! • Know Your Part Numbers? Use the Web Quick Order Page! • Hundreds of Parts List Schematics (and more to come!) • Technical Library packed with information! • See New Items not Shown in Our Printed Catalogs! • Track Your Order Status and History! • Secure Site for Safe On-Line Ordering.

* Double Wall Design, Not Plated. Other Sizes Available on Request.

IND

DULTMEIER SALES • OMAHA, NE

(800) 228-9666

•

www.dultmeier.com

• DAVENPORT, IA

(800) 553-6975

E0933

Vacuum Fittings & Accessories Vacuum Breaker Relief Valves

Vacuum Crevice Tools

“Tip-Top” Vacuum Breakers are designed to break the vacuum between truck and hose end.

Suction Crevice Tools for vacuum applications. Heavy-duty, yet lightweight. Aluminum construction. Overall length is 48”.

Part No. BK Z764000 Suction Tool BK Z766000 Suction Tool

Part No. Size BK BL6004P 4” BK BL6006P 6” BK BL6008P 8”

Wt. 10 lbs. 14 lbs. 18 lbs.

RETAIL $ 443.54 475.70 757.10

Length 48” 48”

Wt. 12 lbs. 15 lbs.

RETAIL $ 410.04 443.54

Crown Nozzles Steel End Nozzles for breakup of suction material in vacuum applications. Serrated ends with air holes aid in action. Available with male or female inlets. Can be used with steel or aluminum suction pipes.

Suction Pipe Tubes Connector Tubes for Vacuum Trucks. All styles are available in 4”, 6” and 8” diameters. Common sizes are shown but any length and ends can be manufactured to request. Pipes shown are either Aluminum or Coated Steel construction and have steel male x female couplers for quick and easy assembly and disassembly. Locking clamps are not included. Female

Size 4” 6”

Part No. BK Z900040 BK Z900060

Inlet 4” Male 6” Male

Male

Wt. RETAIL 3 lbs. $ 73.70 4 lbs. 79.06

Male

Pipe Clamp Handles

Steel Pipe Handles are designed to clamp around steel or aluminum pipe or tubes for ease of handling. Heavy-duty, steel construction with plastic inner sleeve. Pipe

Part No. Style BK 6X8AMF Aluminum BK 6X10AMF * Aluminum BK 6X16AMF Aluminum BK 6X20AMF Aluminum BK 8X8AMF Aluminum BK 8X10AMF * Aluminum BK 8X20AMF Aluminum BK 6X8CMF Coated Steel BK 6X10CMF * Coated Steel BK 6X16CMF Coated Steel BK 6X20CMF Coated Steel BK 8X8CMF Coated Steel BK 8X10CMF * Coated Steel BK 8X20CMF Coated Steel

Size Length Wt. 6” 8’ 21 lbs. 6” 10’ 26 lbs. 6” 16’ 42 lbs. 6” 20’ 52 lbs. 8” 8’ 34 lbs. 8” 10’ 42 lbs. 8” 20’ 84 lbs. 6” 8’ 48 lbs. 6” 10’ 60 lbs. 6” 16’ 96 lbs. 6” 20’ 120 lbs. 8” 8’ 88 lbs. 8” 10’ 110 lbs. 8” 20’ 220 lbs.

* Most Popular Sizes. Quantity Discounts Available on Most Sizes.

RETAIL $ 285.42 322.94 493.12 578.88 290.78 330.98 590.94 218.42 285.42 368.50 455.60 292.12 330.98 578.88

O.D. Size

We now have our Catalogs as well as Parts Schematics online!

Pipe Part No. Size O.D. Wt. RETAIL BK PH8 8” 24” 9 lbs. $ 172.53 BK PH61 6” 36” - 195.31

www.dultmeier.com

IND

DULTMEIER SALES • OMAHA, NE

(800) 228-9666

•

www.dultmeier.com

• DAVENPORT, IA

(800) 553-6975

E0934

90 Degree Swivels

76 90 Degree Swivels

90 Degree Swivels

Ideal selection for use as replacement swivels on Hose Reels. “Live” swivel ball bearing design. Rebuildable. Grease zerk is standard. Superior quality Nickel-plated alloy steel. (Stainless steel construction as noted).

PARKER PS Series 90 Degree Swivels are designed to eliminate hose twist and torque that may cause premature hose failure. Ideal for hose reels, wash booms and industrial applications. Standard Features: Sealed bearings and hardened bearing races for extended service life • Full flow design • Buna or Viton® seals • Teflon backup rings • (Chromium-6 Free) Plated carbon steel construction for added corrosion resistance • Rated to 5000 PSI and 250° F. (Up to 1” sizes) • Available in M x F or F x F NPT ports • Many other port options are available.

AFLAS Seals are rated 400° F. Ideal for use with hot water, steam, hydraulic fluid, insecticides, etc. Retrofits to such popular brands as “Deublin” “Parker Hannifin”, “Aeroquip”, etc. D

Inlet Outlet Max. Max. Part No. Port Port PSI RPM RETAIL SE 9SS4FP 1/4” FPT 1/4” FPT 5000 10 $ 64.32 SE 9SS83AL 3/8" FPT 3/8" FPT 5000 10 64.32 SE 9SS83AL-M 3/8" MPT 3/8" FPT 5000 10 64.66 SE 9SS81AL 1/2" FPT 1/2" FPT 5000 10 63.99 SE 9SS81AL-M 1/2" MPT 1/2" FPT 5000 10 63.99 SE 7153 1/2" MPT 1/2" FPT 5000 30 82.41 SE 9SS12AL 3/4" FPT 3/4" FPT 4500 10 103.18 SE 9SS12AL-M 3/4" MPT 3/4" FPT 4500 10 89.78 SE 24055 **3/4" MPT (SS) 3/4" FPT 3000 10 289.44 SE 25023 *1" FPT 1" FPT 4000 20 139.36 SE 25010 ▲ 1" FPT (SS) 1" FPT 1000 30 313.56 SE 9SS16AL-M 1" MPT 1" FPT 4000 10 111.22 SE 7390 **1" MPT (SS) 1" FPT 3000 10 377.88 SE 9SS20AL 1-1/4" FPT 1-1/4" FPT 4000 10 180.90 SE 9SS20AL-M 1-1/4” MPT 1-1/4” FPT 4000 10 147.40 SE 9SS24AL 1-1/2" FPT 1-1/2" FPT 3000 10 336.34 SE 9SS24AL-M 1-1/2" MPT 1-1/2" FPT 3000 10 336.34 SE SS8KIT-AL Repair Kit, 3/8" & 1/2"................................ 14.34 SE SS12KIT-AL Repair Kit, 3/4", old style............................ 14.61 SE 20183 Repair Kit, 3/4", new style.......................... 24.25 SE 20258 Repair Kit, 16015/25023............................ 23.18 SE SS16KIT-AL Repair Kit, 9SS16AL-M/7390..................... 20.90 SE 7380KIT Repair Kit for 7153 Swivel.......................... 24.25

Male x Female Part No. Size PA PS6901 3/8” M x F PA PS8901 1/2” M x F PA PS12901 3/4” M x F PA PS12901V 3/4” M x F PA PS16901 1” M x F PA PS16901V 1” M x F

Seal Buna Buna Buna Viton® Buna Viton®

Max. PSI 5000 5000 5000 5000 5000 5000

RETAIL $ 85.76 89.11 111.89 125.96 121.94 138.36

Female x Female Part No. Size Seal PA PS6902 3/8” F x F Buna PA PS8902 1/2” F x F Buna PA PS8902V 1/2” F x F Viton® PA PS12902 3/4” F x F Buna PA PS16902 1” F x F Buna PA PS16902V 1” F x F Viton® PA PS24902 * 1-1/2” F x F Buna * 3-Piece design on 1-1/2” sizes.

Max. PSI 5000 5000 5000 5000 5000 5000 4000

RETAIL $ 92.46 89.11 96.48 123.28 131.99 149.75 921.92

90° Swivels Mosmatic 90 Swivels featuring Swiss Engineering are designed for the rigors of high flow water applications. Ideal for use with high pressure automatics, hose reels, sewer cleaners, etc. Rated to water pressures up to 4000 PSI and compressed air to 290 PSI.

NOTE: Kits includes seals, ball bearings, lock washer and zerk. * Double Bearing Design, Plated ▲ Double Bearing, 304SS Construction. ** Stainless steel construction. AL = Aflas Seals.

DGE Series feature Nickel-Plated Brass bodies, one bearing design. Rated to 4000 PSI and 180° F. Maximum of 30 RPM. WDR Series feature Stainless Steel bodies, two Bearing design. Rated to 3000 PSI and 180° F. RPM varies with size.

Extended Design Swivels for Automatics

WDR FxF

DGE MxF

These 1 Inch Inline and 90° Swivels from Super Swivels are designed to retrofit into some of the most popular high pressure automatics, like PDQ and Washworld. Nickel-plated steel construction. Rated to 3,000 PSI and 400° F.

DGE Series Part No.

MM 34873 MM 34883 MM 34874 MM 34884 MM 34875 MM 34885 MM 34876 MM 34886 MM 34877 MM 34887

D D

16091 Inline Swivel

25171 90° Swivel

Max. Max. Max. Part No. Style Inlet Outlet PSI RPM SE 16091 Inline 1" FPT 1” FPT 3000 20 SE 25171 90° 1" FPT 1” FPT 3000 20 SE 20251 Repair Kit for Inline or 90° Swivels.......................

Ports

WDR Series Part No.

MM 41261 MM 41361 MM 41362 MM 41461 MM 41462

RETAIL $ 171.52 179.56 46.57

Construction

Max RPM

Nickel-Plated Brass Nickel-Plated Brass Nickel-Plated Brass Nickel-Plated Brass Nickel-Plated Brass Nickel-Plated Brass Nickel-Plated Brass Nickel-Plated Brass Nickel-Plated Brass Nickel-Plated Brass

30 30 30 30 30 30 30 30 30 30

Ports

Construction

Max RPM

1/2" M x F 3/4" M x F 3/4" F x F 1" M x F 1" F x F

Stainless Steel Stainless Steel Stainless Steel Stainless Steel Stainless Steel

150 130 130 110 110

1/2" M x F 1/2" F x F 3/4" M x F 3/4" F x F 1" M x F 1" F x F 1-1/4" M x F 1-1/4" F x F 1-1/2" M x F 1-1/2” F x F

CALL for PRICING

Viton® is a registered trademark of DuPont Performance Elastomers

IND

DULTMEIER SALES • OMAHA, NE

(800) 228-9666

•

www.dultmeier.com

• DAVENPORT, IA

(800) 553-6975

E0909

Swivels • Nozzle Selector High Pressure Inline Swivels

Ball Bearing Swivels Completely Rebuildable Pressures to 3500 PSI High Pressure Swivel with brass body and stainless steel thrust bearings. Internally lubricated o-rings and 303 stainless center spool piece assure long trouble-free operation. Pressures to 3500 PSI. Maximum temperature is 160° F. Part No.

Pipe Thread Ports

FL SW504 FL SW504A FL SW504HP FL SW504AHP FL RK550

Const. Max. PSI

1/4" MPT x 1/4" FPT Brass 2000 3/8" MPT x 3/8" FPT Brass 2000 1/4" MPT x 1/4" FPT Brass 3500 3/8" MPT x 3/8" FPT Brass 3500 Repair Kit for swivels above..............

FPT Swivel

Easy turn gun swivels for high pressure spray wands. High quality, SwissMade, construction. Rated to 4000 PSI & 250° F. Nickel-plated brass body, stainless steel bearing. Available in 1/4" and 3/8" sizes in male thread, (MPT) and female thread, (FPT). Nitrile o-ring. Ports

Max. PSI

MM 32569 3/8" FPT x 3/8" FPT MM 32564 3/8" MPT x 3/8" FPT MM 32563 3/8" MPT x 3/8" MPT MM 32562 3/8" MPT x 1/4" FPT MM 32561 3/8" MPT x 1/4" MPT MM 32557 1/4" FPT x 1/4" FPT MM 32552 1/4” MPT x 1/4” FPT MM 32863 *1/2” MPT x 1/2” MPT MM 32864 *1/2” MPT x 1/2” FPT * High Flow Swivels

4000 4000 4000 4000 4000 4000 4000 4000 4000

CALL for PRICING

Inlet Port Outlet Port 1/4" FPT 1/4" FPT 1/4" MPT 1/4" FPT 3/8" FPT 3/8" FPT 3/8" MPT 3/8" FPT 1/2" FPT 1/2" FPT 1/2" MPT 1/2" FPT 3/4" FPT 3/4" FPT 3/4" MPT 3/4" FPT 1" FPT 1" FPT * 3/8" FPT 3/8" FPT * 1/2" FPT 1/2" FPT Repair Kit, 3/8” & 1/2”...... Repair Kit, 3/4”................. Repair Kit, 1”....................

RETAIL $ 46.57 57.62 48.24 47.57 50.25 50.59 79.06 79.73 132.66 53.60 53.60 14.20 24.25 20.90

* 90 degree design.

Inline Swivel

Part No. 3/8"MPT x 3/8"FPT SWIVEL Max. PSI RETAIL SS 15950SS Stainless Steel construction 3000 $ 77.05 SS 15950B Brass construction 3000 51.86 SS AB15950 Repair Kit........................................................ 22.98

Ideal for guns and pumping systems up to 1000 PSI. No Ball Bearings to gall or rust. All Brass Body. Available in 1/4”, 3/8” and 1/2” sizes. Non- repairable. Maximum Temperature is 180° F. Part No.

SM 902-1/4 SM 900-3/8 SM 901-1/2

Pipe Thread Ports

Max. PSI

1/4" MPT x 1/4" FPT 3/8" FPT X 3/8" MPT 1/2" FPT x 1/2" MPT

1000 1000 1000

RETAIL

$ 11.99 12.26 18.89

90° Swivel

Dual Nozzle Selector

High Pressure Swivels from Suttner! Available in 3/8" MPT x FPT or 3/8" FPT x FPT. Rated to 5000 PSI. Maximum temperatures to 300° F. Rated to 12 GPM. Nickel-plated brass or stainless construction. Rebuildable design. Teflon seal. Part No. NP ST300 NP ST325 NP ST310 NP ST300K

Medium Pressure Swivels

Swivels

Part No. Construction Inlet Port Outlet Port RETAIL SE SS838-A Plated 3/8" FPT 3/8" FPT $ 47.57 SE SS838MF-A Plated 3/8" MPT 3/8" FPT 48.24 SE SS812-A Plated 1/2" FPT 1/2" FPT 49.58 SE 14090 * Plated 1/2” FPT 1/2” FPT 83.08 SE SS812MF-A Plated 1/2" MPT 1/2" FPT 50.25 SE SS1234 Plated 3/4" FPT 3/4" FPT 79.06 SE SS1234MF Plated 3/4" MPT 3/4" FPT 79.73 SE 16015 * Plated 1" FPT 1" FPT 132.66 SE 1244 Plated 1" MPT 1" FPT 107.20 SE 1046 Stainless 1" FPT 1" FPT 329.64 SE SS20AL Plated 1-1/4" FPT 1-1/4" FPT 176.88 SE SS20MF Plated 1-1/4" MPT 1-1/4" FPT 180.90 SE 1064 Plated 1-1/2” FPT 1-1/2” FPT 335.00 SE 1264 Plated 1-1/2” MPT 1-1/2” FPT 330.98 SE SS8KIT-AL Repair Kit, 1/2" Swivels........................... 14.34 SE 20183 Repair Kit, 3/4" Swivels........................... 24.25 SE SS16KIT-AL Repair Kit, 1" Swivels.............................. 20.90 SE SS20KIT-AL Repair Kit, 1-1/4" Swivels........................ 29.21 * Double Bearing Design.

For pressures to 3000 PSI. Stainless Steel or brass construction. Bearings are self-lubricated Teflon filled acetal for long life and low torque requirements. Maximum temperature is 200° F. Ports are 3/8" FPT x 3/8" MPT.

High Pressure, Hydraulic “Live” Swivels are available in either “Inline” or “90° angle” styles. Designed for the rigors of hydraulic fluid requirements. Chrome ball bearing design for added life. Easily rebuildable. Superior quality alloy steel. All swivels shown are “inline” design except for 9SS models.

Part No. SE SS614 SE SS614MF SE SS838 SE SS838MF SE SS812 SE SS812MF SE SS1234 SE SS1234MF SE 16015 SE 9SS83CV SE 9SS81CV SE SS8KIT SE 20183 SE SS16KIT

MPT Swivel

Super Swivels "Inline Swivels" are designed with AFLAS™ seals for water, soap or wax solutions (Viton® also available). Rated for pressures up to 3,000 psi. Maximum temperature: +32° F. to +400° F. Available in zinc-plated carbon or stainless steel high quality alloy steel. Easily rebuildable. "Live" design swivels under pressure. (For Hydraulic fluids - See Hydraulic swivels shown elsewhere on this page).

High Pressure Swivels

Hydraulic Fluid Swivels

Rated to 5000 PSI. Retrofits to brands such as Parker Hannifin, Aeroquip, Hydraulics Inc., etc. Zinc-plated Carbon steel construction with Viton® seals are standard. Maximum temperature: -15° F. to +250° F.

RETAIL

$ 25.86 25.13 26.40 28.81 13.60

Wand Swivels

Part No.

Ports Type RETAIL 3/8" M x F Brass $ 15.54 3/8" F x F Brass 17.29 3/8" M x F Stainless 42.88 Repair Kit.................. 14.54

Dual Nozzle Selector from Cat Pumps®: Designed for use with two spray nozzles for high and low pressure. Dual nozzle selector enables the operator to use a downstream injector for corrosive chemical injection. Simple right to left turn rotates ball to open high or low pressure passage.Maximum flow is 7 GPM, Maximum pressure is 3000 PSI. Inlet port is 1/4" FPT. Nozzle ports are 1/4" FPT. Part No.

RETAIL

CC 32149

$ 14.27

Viton® is a registered trademark of DuPont Performance Elastomers

IND

DULTMEIER SALES • OMAHA, NE

(800) 228-9666

•

www.dultmeier.com

• DAVENPORT, IA

(800) 553-6975

E0587

Swivels

Inline Swivels

Wand Swivels Easy Turn Gun Swivels for High Pressure Spray Wands are high quality, Swiss-Made, construction. Rated to 4000 PSI & 250° F. Nickel-plated brass body, stainless steel bearing. Available in 1/4" and 3/8" sizes in male thread, (MPT) and female thread, (FPT). Nitrile o-ring.

Inline Swivels from Mosmatic feature Swiss Engineering and are designed for high flow water and air applications. Buna seals are standard, but EPDM is available. DGE Series feature Nickel-Plated Brass bodies, one bearing design. Rated to 4000 PSI and 250° F. Maximum of 30 RPM. DGR Series feature Stainless Steel bodies, 4 Bearing design. Rated to 3000 PSI and 180° F. RPM varies with size. DGR FxF

DGE MxF Part No.

Ports

MM 32863 *1/2" MPT x 1/2" MPT MM 32864 *1/2" MPT x 1/2" FPT MM 32569 3/8" FPT x 3/8" FPT MM 32564 3/8" MPT x 3/8" FPT MM 32563 3/8" MPT x 3/8" MPT MM 32562 3/8" MPT x 1/4" FPT MM 32561 3/8" MPT x 1/4" MPT MM 32557 1/4" FPT x 1/4" FPT * High Flow Swivels

CALL for PRICING

DGE Series Part No.

Flanged Style

MM 34853 MM 34863 MM 34854 MM 34864 MM 34855 MM 34865 MM 34856 MM 34866 MM 34857 MM 34867

High Pressure Swivels High Quality, Flanged Style Swivels for surface cleaners, fire applicators, under carriage wash, etc. Brass, Nickel-plated construction. Standard with Carbide seals rated to 250° F. Max. Max. Maximum Part No. Ports PSI RPM Temperature

MM 58051 MM 58153

1/4" F x 1/4" M 3/8" F x 3/8" M

4000 2000 4000 2000

250° F. 250° F.

MM 38051 MM 38153

1/4" F x 1/4" M 3/8" F x 3/8" M

2000 2000 2000 2000

250° F. 250° F.

CALL for PRICING

Ports

1/2" M x F 1/2" F x F 3/4" M x F 3/4" F x F 1" M x F 1" F x F 1-1/4" M x F 1-1/4" F x F 1-1/2" M x F 1-1/2” F x F

DGR Series Part No.

MM 34211 MM 34212 MM 34311 MM 34312 MM 34411 MM 34412 MM 34511 MM 34512

High Quality, Bulkhead Swivels for surface cleaners, tire applicators, under carriage wash, etc. Brass, Nickel-plated construction. 37 Series is standard with Ceramic seals. 57 Series is standard with Carbide seals. Max. Max. Maximum PSI RPM Temperature

MM 33051 MM 33153 MM 37051 MM 37153 MM 57051 MM 57153

4000 4000 2500 2500 4000 4000

1/4" F x 1/4" M 3/8" F x 3/8" M 1/4" F x 1/4" M 3/8" F x 3/8" M 1/4" F x 1/4" M 3/8" F x 3/8" M

1000 1000 2000 2000 2000 2000

100° F. 100° F. 250° F. 250° F. 250° F. 250° F.

CALL for PRICING

High Pressure Gun Swivels High Pressure Gun Swivels. Brass or stainless steel construction. Rebuildable design. Rated to 200˚ F. Brass rated to 3,000 PSI. Stainless rated to 5,000 PSI. D D

7080

Part No. AA 7045 AA 7080 AA 7044 AA 7084

IND

7044

Material Size Max. PSI RETAIL Brass 3/8" F X F 3000 $ 20.90 Brass 3/8" M x F 3000 19.36 Stainless 3/8" M x F 5000 25.73 Repair Kit for above swivels......... 3.63 DULTMEIER SALES • OMAHA, NE

(800) 228-9666

30 30 30 30 30 30 30 30 30 30

Construction

Max RPM

Stainless Steel Stainless Steel Stainless Steel Stainless Steel Stainless Steel Stainless Steel Stainless Steel Stainless Steel

200 200 150 150 130 130 100 100

Ports

CALL for PRICING

Inline Swivels

High Pressure Swivels

Part No. Ports

Max RPM

1/2" M x F 1/2" F x F 3/4" M x F 3/4" F x F 1" M x F 1" F x F 1-1/2" M x F 1-1/2” F x F

Bulkhead Style

Construction

Nickel-Plated Brass Nickel-Plated Brass Nickel-Plated Brass Nickel-Plated Brass Nickel-Plated Brass Nickel-Plated Brass Nickel-Plated Brass Nickel-Plated Brass Nickel-Plated Brass Nickel-Plated Brass

PARKER PS Series Inline Swivels are designed to eliminate hose twist and torque that may cause premature hose failure. Ideal for hose reels, wash booms and industrial applications.

Standard Features: Sealed bearings and hardened bearing races for extended service life • Full flow design • Buna or Viton® seals • Teflon backup rings • (Chromium-6 Free) Plated carbon steel construction for added corrosion resistance • Rated to 5000 PSI and 250° F. (Up to 1” sizes) • Available in M x F or F x F NPT ports • Many other port options are available. Male x Female Part No. Size PA PS6101 3/8” M x F PA PS6101V 3/8” M x F PA PS8101 1/2” M x F PA PS12101 3/4” M x F PA PS12101V 3/4” M x F PA PS16101 1” M x F

Seal Buna Viton® Buna Buna Viton® Buna

Max. PSI 5000 5000 5000 5000 5000 5000

RETAIL $ 87.10 104.52 89.11 95.81 128.64 139.03

Female x Female Part No. Size Seal Max. PSI PA PS6102 3/8” F x F Buna 5000 PA PS6102V 3/8” F x F Viton® 5000 PA PS8102 1/2” F x F Buna 5000 PA PS8102V 1/2” F x F Viton® 5000 PA PS12102 3/4” F x F Buna 5000 PA PS16102 1” F x F Buna 5000 PA PS16102V 1” F x F Viton® 5000 PA PS2420 * 1-1/4” F x F Buna 4000 PA PS2424 * 1-1/2” F x F Buna 4000 * 3-Piece design on 1-1/4” & 1-1/2” sizes.

RETAIL $ 79.06 91.12 83.08 94.47 103.85 126.63 139.03 737.00 743.70

Viton® is a registered trademark of DuPont Performance Elastomers

•

www.dultmeier.com

• DAVENPORT, IA

(800) 553-6975

E0854

Hose Reel Swivels • Hose Couplings

990-3/8

Brass Body

Part No.

90° Boom Swivels

Right Angle Swivels

Stainless Stem

Designed to swivel at 1500 PSI. No ball bearings to gall or rust. All Brass Body with Stainless Steel stem. Bronze thrust bearing for longer life. Buna-N seals are standard. Swivels are repairable. Available threaded 3/8" MPT x 3/8” FPT or 3/8” FPT x 3/8” FPT. Pipe Thread Ports

40021

D D

Max. Pressure

40028

RETAIL

90° Boom Swivels for ceiling or wall booms as well as hose reels. These swivels have a multiple seal system to prevent leakage under both low and high pressure. Constructed of a nickel-plated brass body with stainless steel internals. NBR o-rings and teflon support rings. Rated to 2200 or 4000 PSI and 250° F. * Available in either short or long stem design for ease in plumbing.

90 Degree Swivels

Part No.

Solid brass body with precision stainless steel thrust bearings to swivel effortlessly at full rated pressure. Internally lubricated o-rings and polished 303 stainless steel spool piece assures long, trouble-free operation. An excellent replacement swivel for hose reels and overhead booms.

Max. Part No. Ports PSI

FL SW504-L 1/4" M x 1/4" F FL SW504A-L 3/8" M x 3/8" F FL SW504A-LFF 3/8" F x 3/8" F

3500 3500 3500

990-3/8F

SM 990-3/8 3/8" FPT X 3/8" MPT 1500 PSI $ 36.45 SM 990-3/8F 3/8" FPT x 3/8" FPT 1500 PSI 40.74 SM 990RK Repair Kit ............................................ 7.71

Inlet

Outlet

Hose I.D.

Thread

3/8” 1/4” MPT 3/8” 3/8” MPT 1/2” 3/8” MPT 1/2” 1/2” MPT 3/4” 1/2” MPT 3/4” 3/4” MPT 1” 1” MPT 3/8” 3/8” MPT Swivel 1/2” 1/2” MPT Swivel 3/4” 3/4” MPT Swivel 1” 1” MPT Swivel 3/8” 3/8” FPT 1/2” 3/8” FPT 1/2” 1/2” FPT 3/4” 3/4” FPT 1” 1” FPT 3/8” 1/4” FPT Swivel 3/8” 3/8” FPT Swivel 1/2” 3/8” FPT Swivel 1/2” 1/2” FPT Swivel 3/4” 3/4” FPT Swivel 1” 1” FPT Swivel

Stem

RPM

Call for Pricing

Hose Reel Swivels

RETAIL

$ 44.22 45.16 45.16

Gates Hose is available in custom-fitted assemblies using Gates Low Pressure Power Crimp Fittings - see our index for page number. These fittings are available for 3204, 1B and 3200R hose and some Kuriyama hose and tubing. Specify length and size -3/8, -1/2, -3/4 and -1” male or female. Coupling pressures to 1000 PSI. GA 6GLX-4MP GA 6GLX-6MP GA 8GLX-6MP GA 8GLX-8MP GA 12GLX-8MP GA 12GLX-12MP GA 16GLX-16MP GA 6GLX-6MPX GA 8GLX-8MPX GA 12GLX-12MPX GA 16GLX-16MPX GA 6GLX-6FP GA 8GLX-6FP GA 8GLX-8FP GA 12GLX-12FP GA 16GLX-16FP GA 6GLX-4FPX GA 6GLX-6FPX GA 8GLX-6FPX GA 8GLX-8FPX GA 12GLX-12FPX GA 16GLX-16FPX

PSI

MM 40021 1/4" M 1/4" F 2200 Short 30 MM 40022 3/8" M 1/4" F 2200 Short 30 MM 40032 3/8" M 3/8" F 2200 Short 30 MM 40028 1/4" M 1/4" F 2200 Long 30 MM 40029 3/8" M 1/4" F 2200 Long 30 MM 40039 3/8" M 3/8" F 2200 Long 30 MM 43262 * 3/8" M 3/8" F 4000 Short 500 MM 43363 * 1/2" M 1/2" F 4000 Short 300 MM 40502 Seal Kit.......................................................... * 43 Series are rated to 300° F. & 5000 PSI.

43463B

Hose Reel Swivels from Mosmatic. Common replacement swivel for many of the major reel manufacturers. All stainless construction, rebuildable design. Swivels under pressure. Rated to 5,000 PSI, 250° F. Maximum of 30 RPM. Available in 1/2” F x F or F x M FPT inlet and outlet.

Ports

Max. PSI

Low Pressure Hose Couplings

Part No.

43473B

Female x Female

Female x Male

Part No.

Max. RPM

MM 43463B 1/2" F x M 5,000 30 MM 43473B 1/2” F x F 5,000 30 MM 43922 Repair Kit....................................

Call for Pricing

RETAIL

$ 7.91 7.04 12.66 7.91 16.35 13.87 26.93 13.87 16.62 29.08 44.22 9.51 17.42 13.13 18.63 36.18 15.81 18.89 20.64 20.70 25.86 37.79

Hose Reel Swivel Right Angle Hose Reel Swivel. Heavy duty design. Ideal for use as a replacement swivel on a wide variety of hose reel applications. Brass construction. Easily rebuildable. Ports are 1/2" FPT x 1/2" FPT. Rated to 3000 PSI. Viton® O-rings and Teflon washer are standard. Maximum temperature is 300° F.

GLX - Female Coupling Solid or Swivel

Part No. Max. Pressure Max. Flow RETAIL AA 7475 3000 PSI 10 GPM $ 51.32 AA 7475K Repair Kit.............................. 19.30 D

GLX - Male Coupling Solid or Swivel

Hose Reel Swivels Hose Reel Swivels from Super Swivels. Common replacement swivels used by many of the major hose reel manufacturers. Ball bearing, 90 degree design. Nickel-Plated steel with Viton® seal. Rebuildable. Rated to 400° F. Pressure vary as shown. Ports are FPT x FPT.

Max. Part No. Size PSI RETAIL SE 5023 1/2” FPT 5000 $ 64.99 SE 5033 3/4” FPT 4000 90.45 SE 5043 1” FPT 4000 112.56 SE 5053 1-1/4” FPT 4000 184.92 SE 5063 1-1/2” FPT 3000 330.98 SE SS8KIT Repair Kit, 3/8” & 1/2”..... 14.20 SE SS12KIT Repair Kit, 3/4”................ 14.61 SE SS16KIT Repair Kit, 1”................... 20.90

Find Us on Facebook and Twitter

Viton® is a registered trademark of DuPont Performance Elastomers

DULTMEIER SALES • OMAHA, NE

(800) 228-9666

•

www.dultmeier.com

• DAVENPORT, IA

(800) 553-6975

E0485

Sprayer & General Purpose Hose General Service Hose

Black EPDM Hose In Reels EPDM for Ag Chemicals EPDM tube and cover for most all agricultural products and NH3 applicator lines. EB numbers are packaged on a convenient UPSable reel. One braid, 200 PSI (2 braid, 250 PSI on 3/4) Temperatures to 150° F. Same as 1B hose (below), but in black. Cut Lengths Sold in 5’ Increments Only.

CONSTRUCTION: EPDM Cover, EPDM Tube D

Hose Reel Hose Per Reel Sold Per Ft. Part No. Color I.D. Size Ft. O.D. Discount By RETAIL Sold Per Foot (Can Be Cut) GA 3204EB-1/4 Black † 1/4” 500’ 0.50” 20% Per Ft. $ 0.90 GA 3204EB-3/8 Black † 3/8" 500’ 0.66” 20% Per Ft. 0.80 GA 3204-1413 Black 1/2” 500’ 0.81” 20% Per Ft. 0.99 GA 3204-1425 Black 3/4” 500’ 1.11” 20% Per Ft. 1.82 GA 3204-1431 Black 1” 400’ 1.40” 20% Per Ft. 1.97 SOLD IN UPSABLE REELS ONLY GA 3204EB-1/2 Black * 1/2” 250’ 0.81” - Per Reel $ 195.64 GA 3204EB-3/4X200 Black * 3/4” 200’ 1.11” - Per Reel 286.76 GA 3204EB-1 Black * 1” 125’ 1.40” - Per Reel 198.32

— Plant Master —

Red EPDM General Purpose Hose for air, water and agricultural chemicals. Same as 3204 above but with red cover, except on 1-1/4” and 1-1/2”. Good resistance to weather and abrasion. *These sizes D are UPSable packages on reels. Not recommended for oils. For oils use 3205R Gates Premoflex. Temperature Range: 0 to 150 degrees F.

IND

DULTMEIER SALES • OMAHA, NE

Parker GST 11 General Purpose Hose is an ideal choice for air and water service as well as being compatible with a wide variety of chemical products including water based agricultural sprays. EPDM tube and cover with textile reinforcement is standard. This hose design has a good resistance to heat, sunlight, ozone and weathering. Not suitable for transfer of petroleum products. Rated to 200 PSI working pressure. Excellent kink resistance. Temperature rating is from -40° to +212° F. Reinf. Max. Bend Wt. Hose No. I.D. Spirals O.D. Rec. WP Radius 100-Ft. 7093-38 3/8" 2 0.656” 200 3.5 14 lbs. 7093-12 1/2” 2 0.813” 200 4.5 21 lbs. 7093-34 3/4” 2 1.109” 200 6.0 32 lbs. 7093-1 1” 2 1.406” 200 7.0 44 lbs. 7093-112 1-1/2” 2 2.03” 200 10.0 86 lbs.

Reel Size 700’ 550’ 400’ 300’ 200’

An excellent general purpose hose for water, air, lubricated air, light chemicals, anti-freeze and some acids. Standard with a blue cover.

† Also UPSable.

• Exceptionally Flexible & Lightweight

• Highly Resistant to UV Rays & Ozone

• PVC Cover is Non-Marking with Excellent Abrasion & TearResistance

• Non-Conductive & Flame Retardant • Temperature Range: -15° F. to +150° F.

• PVC Tube with Two-Spiral Polyester Yarn for Strength

NOTE: CUT LENGTHS SOLD IN 5’ INCREMENTS ONLY D D

Max. Vacuum Temp. Bend Wt. Approx. Hose No. I.D. Braids PSI (in./Hg.) Range F. Radius 100-Ft. Reel Size 3200R-1/4 1/4" 2 250 30 -40-200° 3" 10 lbs. 500’-700’ 3200R-3/8 3/8" 2 250 30 -40-200° 3" 14 lbs. 500’-700’ 3200R-1/2 1/2" 2 250 25 -40-200° 5" 19 lbs. 500’-700’ 3200R-3/4 3/4" 2 250 15 -40-200° 6" 34 lbs. 500’-700’ 3200R-1 1” 2 250 10 -40-200° 8” 54 lbs. 300’-400’

Hose Hose Full Reel Per Foot Part No. I.D. O.D. Discount RETAIL GA 3200R-1/4 1/4" 0.50 20% $ 1.59 GA 3200R-3/8 3/8" 0.66 20% 2.01 GA 3200R-1/2 1/2" 0.81 20% 2.43 GA 3200R-3/4 3/4" 1.15 20% 3.50 GA 3200R-1 1” 1.47 20% 5.12

• Temperature Rating: -40° to +212° F

Ultra Lightweight, Ultra Flexible PVC Hose

— Plant Master —

GATES DUROFLEX HOSE has a red EPDM cover and black tube. A general purpose hose compounded for good flexibility, air, water, abrasions and ozone. B1 Tube is an EPDM mix with proprietary materials to provide some oil resistance for intermittent us.For oil use 3205R Gates Premoflex.

• Rated to 200 PSI

* 20% Discount if ordered in Standard Pack Reels. Reel Lengths are Approximate and May Vary. Non Continuous Lengths, May be Up to 3 lengths Per Reel with No Size Less than 50 Ft.

DURO FLEX Hose

• Excellent Kink Resistance

• Good Resistance to Chemicals, Heat, Sunlight, Ozone & Weathering

* Per Foot Part No. I.D. O.D. Max. PSI * Reel Size RETAIL PA 7093-38 3/8” 0.656” 200 700’ $ 1.23 PA 7093-12 1/2” 0.813” 200 550’ 1.27 PA 7093-34 3/4” 1.109” 200 400’ 2.09 PA 7093-1 1” 1.406” 200 300’ 3.10 PA 7093-112 1-1/2” 2.03” 200 200’ 7.24

NOTE: CUT LENGTHS SOLD IN 5’INCREMENTS ONLY

Hose Reel Per Reel Sold Per Ft. Part No. Color I.D. Size Ft. O.D. Discount By RETAIL Sold Per Foot (Can Be Cut) GA 1B-3/8x2 Red † 3/8" 400’ 0.66” 20% Per Ft. $ 1.31 GA 1B-5/8x2 Red † 5/8” 250’ 0.97” 20% Per Ft. 1.98 GA 3204-1328 Red 1/2" 500’ 0.81” 20% Per Ft. 1.55 GA 3204-1346 Red 3/4" 500’ 1.11” 20% Per Ft. 2.33 GA 3204-1361 Red 1" 400’ 1.40” 20% Per Ft. 4.05 GA 6B-2 Red 2” 100’ 2.56” 20% Per Ft. 7.77 GA 1B-1-1/4x2 Black 1-1/4" 200’ 1.73” 20% Per Ft. 5.65 GA 1B-1-1/2x2 Black 1-1/2" 200’ 1.98” 20% Per Ft. 6.97 GA 1B-2x2 Black 2” 100’ 2.56” 20% Per Ft. 7.77 Sold In UPSABLE Reels Only - Reel Per Ft. $ 1.21 GA 1B-1/2x2 Red * 1/2” 250’ 0.81” - Reel Per Ft. 1.88 GA 1B-3/4x2 Red * 3/4” 200’ 1.11” GA 1B-1x2 Red * 1” 125’ 1.40” - Reel Per Ft. 3.22

* Note: These package sizes are UPSable & Sold In Reels Only.

• EPDM Tube & Cover

Red/Black ADAPTAFLEX Hose

Working WT. Suction Press. PER In NUMBER Size Braid P.S.I. Color 100' HG * 1B-3/8x2 3/8" 2 200 Red 14 30 * 1B-1/2X2 1/2" 2 200 Red 20 25 * 1B-5/8X2 5/8" 2 200 Red 23 20 * 1B-3/4x2 3/4" 2 200 Red 30 15 * 1B-1x2 1" 2 200 Red 55 10 6B-2 2” 2 200 Red 128 4 1B-1-1/4x2 1-1/4" 2 250 Black 70 10 1B-1-1/2x2 1-1/2" 2 200 Black 80 10 1B-2x2 2” 2 200 Black 128 4 * These sizes available in UPSable reels.

• NOT SUITABLE for Petrolem Products

NOTE: CUT LENGTHS SOLD IN 5’ INCREMENTS ONLY

* Note: These package sizes are UPSable & Sold In Reels Only. † Also UPSable.

• Good Choice for Air & Water Service

Reinf. Vacuum Max. Bend Wt. Reel Hose No. I.D. Spirals O.D. Rating PSI Radius 100-Ft. Size GPH-38 3/8” 2 0.64” 23 300 1” 12.3 lbs. 500’ GPH-12 1/2” 2 0.80” 17 300 1-1/2” 17.6 lbs. 500’

Hose Hose Full Full Reel Part No. I.D. O.D. Reel Discount PA GPH-38 3/8” 0.64” 500’ 20% PA GPH-12 1/2” 0.80” 500’ 20%

NOTE: CUT LENGTHS SOLD IN 5’ INCREMENTS ONLY

Per Foot RETAIL $ 1.76 2.22

Please remember there are No Returns on customer specified cut lengths of hose.

(800) 228-9666

•

www.dultmeier.com

• DAVENPORT, IA

(800) 553-6975

E0847

Suction & Discharge Transfer Hose 390SD

Suction & Discharge Hose

EPDM All Weather Suction/Discharge Hose • Lightweight - Low Cost • 100% EPDM Tube • Abrasion Resistant Cover

• Smooth I.D. for Maximum Flow Rates • Ideal for High Ozone Areas

390SD Series EPDM Suction or Discharge Hose. 100 PSI rating at 72° F. Full vacuum rating at 72° F.. Polyethylene Helix. Corrugated OD. Smooth Bore. Internal Braiding for higher pressure. Color: Black. -40° F. to +140° F. TSD400 is a Kuriyama brand. CW Helix wrap. Note: Use of 12” of banding coil at the fitting will reduce flexing which is a common cause of hose failure at the connection.

Series 390SD

NOTE: CUT LENGTHS SOLD IN 5’ INCREMENTS ONLY

* Std. Wt. Part No. I.D. O.D. Pkg. /Ft. KA 390SD-1-1/4 1-1/4" 1.60” 100' .34 lbs. KA 390SD-1-1/2 1-1/2" 1.87” 100' .47 lbs. KA 390SD-2 2" 2.42” 100' .61 lbs. KA 390SD-3 3" 3.68” 100' 1.10 lbs. TF TSD400 4” 4.53” 100’ 1.40 lbs.

Working Bend Pressure Radius 100 PSI 9” 100 PSI 10” 100 PSI 11” 90 PSI 15” 75 PSI 10”

Per Foot RETAIL $ 3.73 4.58 5.92 10.32 19.50

– Heavy Duty –

Heavy Duty Water Suction/Discharge Hose for agricultural, construction and industrial applications. EDPM/SBR blend cover and tube designed to handle a variety of liquids including fertilizers and others. Wire helix reinforcement. Maximum Working Pressure is 100 PSI. Temperatures: -30° F. to 195° F. 27” Vacuum. Sold In 5’ Increments Only (3” or Less). Wt. Bend * Std. Part No. I.D. O.D. /Ft. Radius Pkg. GD N645-1 1" 1.41" .52 lbs. 4" 100’ GD N645-1-1/4 1-1/4" 1.65" .62 lbs. 5" 100’ GD N645-1-1/2 1-1/2" 1.89" .87 lbs. 7" 100’ GD N645-2 2" 2.48" 1.06 lbs. 10" 100’ GD N645-2-1/2 2-1/2" 3.03" 1.31 lbs. 11" 100’ GD N645-3 3" 3.54" 1.73 lbs. 12" 100’ GD N645-4 4" 4.53" 2.55 lbs. 14" 100’ TF T202-5 † 5” 5.50” 3.2 lbs. 23” 20’ GD N645-6 6" 6.77" 5.5 lbs. 15" 100’ GD N645-8 8” 8.81” 7.5 lbs. 16” 20’/25’ Working pressure, bend radius & vacuum rating all at 72° F. † 5” Size is Kuriyama Brand. * 20% Discount for Standard Package

Flexible EPDM Rubber Hose with green or yellow polyethylene helix combines chemical resistance with durability. Excellent cold weather flexibility. Weather resistant exterior. Lightweight and easy-to-handle. Abrasion resistant design slides easily on rough surfaces. Rated from -40 to 160° F. Full vacuum rating to 4” size at 68° F. Sold in rolls, cut to length and fitted assemblies. Red & Blue also available.

• Septic Handling • Liquid Waste, Slurries • Liquid & Dry Chemical • Agriculture Liquid & Dry Fertilizers • Grains & Seeds • Water Transfer • Mining • Construction, Rental Equipment, Sewer Cleaning, Plant Maintenance

Series TG

Series TY

Green

Yellow NOTE: CUT LENGTHS SOLD IN 5’ INCREMENTS ONLY

* 20% Discount for Standard Package

EPDM Rubber Suction / Discharge Hose

Per Foot RETAIL $ 4.40 4.56 5.43 6.38 7.84 9.51 15.41 25.73 27.74 60.30

PSI Wt./Lbs. * Per Foot Part No. I.D. O.D. Color @ 68° F. Per Foot RETAIL TF TG100 1" 1.40" Green 65 .28 $ 2.02 TF TG125 1-1/4” 1.63” Green 60 .33 2.29 TF TG150 1-1/2” 1.93” Green 50 .44 2.56 TF TG200 2” 2.51” Green 50 .67 3.77 TF TG250 2-1/2” 3.07” Green 45 .95 5.92 TF TG300 3” 3.60” Green 45 1.14 7.17 TF TG400 4” 4.70” Green 40 1.84 11.86 TF TG600 6” 6.85” Green 30 3.70 22.91 TF TY100 1” 1.40” Yellow 65 .28 2.16 TF TY125 1-1/4” 1.63” Yellow 60 .33 2.43 TF TY150 1-1/2” 1.93” Yellow 50 .44 2.69 TF TY200 2” 2.51” Yellow 50 .67 3.97 TF TY300 3” 3.60” Yellow 45 1.14 7.50 TF TY400 4” 4.70” Yellow 40 1.84 12.53 TF TB200 2” 2.51” Blue 50 .67 3.90 TF TB300 3” 3.60” Blue 45 1.14 7.44 TF TB400 4” 4.70” Blue 40 1.84 12.53 KA 300G-2 * 2” 2.50” Green 50 .67 3.77 KA 300G-3 * 3” 3.60” Green 43 1.10 7.10 KA 300Y-2 * 2” 2.50” Yellow 50 .67 3.77 KA 300Y-3 * 3” 3.60” Yellow 43 1.10 7.10 NOTE: Red Hose also available. * Kanaflex 300 is comparable alternative to Tigerflex.

*20% Discount if Ordered in 100’ Rolls

Suction/Discharge Hose Assemblies D D

PVC Suction • Methane • Discharge Hose

NOTE: CUT LENGTHS SOLD IN 5’ INCREMENTS ONLY

125PVC is a general purpose PVC suction and discharge hoses for water and fertilizers. (PVC is not suitable for some agricultural chemicals - must use EPDM). 101PS-UVOR Orange hose with extra UV inhibitor for methane gas recovery at landfills. Available in 3 sizes with internal ID to mate with OD of rigid pipe. Full vacuum rating to 4” at 72° F. Temperature Range: -13˚F. to +158˚F. This hose becomes stiff at low ambient temperatures. 125PVC Clear with White Helix for Water/Fertrilizers 101PS-UVOR Orange with UV Inhibitor for Methane Gas

PSI@ Std. Std. Pkg. Per Foot Part No. I.D. O.D. 68˚F Pkg. Wt/C Discount RETAIL TF 125PVC-3/4 3/4" .95” 100 100' 18 20% $ 0.88 TF 125PVC-1 1" 1.25” 75 100' 24 20% 1.07 TF 125PVC-1-1/4 1-1/4" 1.47” 75 100' 31 20% 1.31 TF 125PVC-1-1/2 1-1/2" 1.75” 65 100' 38 20% 1.57 TF 125PVC-2 2" 2.27” 60 100' 56 20% 2.17 TF 125PVC-2-1/2 2-1/2" 2.84” 60 100' 67 20% 2.68 TF 125PVC-3 3" 3.35” 60 100' 99 20% 3.78 TF 125PVC-4 4" 4.45” 50 100' 146 20% 6.19 TF 125PVC-5 5" 5.55” 35 50' 240 20% 12.26 TF 125PVC-6 6" 6.67” 35 100’ 284 20% 11.12 KA 110CL-8 8" 9.04” 28 25' 580 20% 28.14 KA 101PS-UVOR-2.38 2.38” 2.76” 35 *100’ 64 - 4.05 KA 101PS-UVOR-3.50 3.50” 4.02” 30 *100 110 - 7.17 KA 101PS-UVOR-4.50 4.50” 5.08” 30 *100 170 - 10.05 * 100 ft. Package Only - No Cuts.

IND

DULTMEIER SALES • OMAHA, NE

(800) 228-9666

•

TG Series Hose Assemblies

Use TY in place of TG for Yellow Assemblies

Flexible TigerFlex Hose Assemblies. All of the same qualities shown in the bulk hose but in cut lengths. Aluminum female lever coupler on one end and male adapter on the other end. Banded clamp design for added life and performance. Stock hoses are Tiger Green, but Tiger Yellow, Tiger Blue or Tiger Red can also be made to order. Lengths other than those shown are also available. Part No. I.D. Length DU TG200X20 2" 20’ DU TG200X25 2” 25’ DU TG200X30 2” 30’ DU TG200X35 2” 35’ DU TG200X40 2” 40’ DU TG300X20 3” 20’ DU TG300X25 3” 25’ DU TG300X30 3” 30’ DU TG300X35 3” 35’ DU TG300X40 3” 40’ DU TG400X10 4” 10’ DU TG400X20 4” 20’ DU TG400X25 4” 25’ DU TG400X30 4” 30’ DU TG400X35 4” 35’ DU TG400X40 4” 40’

Color Wt./Lbs. RETAIL Green 15 $ 131.32 Green 18 144.72 Green 22 152.76 Green 25 162.14 Green 29 183.58 Green 27 206.36 Green 32 235.84 Green 38 265.32 Green 44 294.80 Green 49 324.28 Green 24 188.94 Green 42 320.26 Green 51 348.40 Green 61 397.98 Green 70 470.34 Green 79 497.14

Please remember there are No Returns on customer specified cut lengths of hose.

www.dultmeier.com

• DAVENPORT, IA

(800) 553-6975

E0308

Suction & Discharge Transfer Hose

Acid Chemical Hose

Super Flexible PVC

Suction & Discharge Hose

45HW

Clear PVC material with blue helix. Smooth cover. For water, fertilizer, construction, irrigation. A very flexible hose with a minimum bend radius. -40˚ F. to 150˚ F. range. Full vacuum at 70˚F. Note: PVC hose is not suitable for certain agricultural chemicals. Sold in 5’ Increments Only.

“Mustang”

PSI@ Bend Radius Std. Wt./ * Per Foot Part No. I.D. O.D. 68˚F @68˚F Pkg. C RETAIL TF BW075 3/4" 1.01” 90 3” 100 19 $ 1.62 TF BW100 1" 1.26” 90 3” 100 19 1.89 TF BW125 1-1/4" 1.56” 90 4” 100 36 2.16 TF BW150 1-1/2" 1.79” 90 5” 100 48 2.56 TF BW200 2" 2.35” 90 7” 100 62 3.63 TF BW300 3" 3.43” 65 10” 100 123 6.90 TF BW400 4" 4.49” 55 15” 100 183 12.13 * 20% Discount for Standard Packages.

Not Suitable for DEF Wt/ 100’ Std. Pkg. Part No. I.D. O.D. PSI Ft. Pkg. Disc. GA 45HW-1 1" 1.50” 200 .54 20% GA 45HW-1-1/4 1-1/4" 1.75” 200 .64 20% GA 45HW-1-1/2 1-1/2" 2.04” 200 .84 20% GA 45HW-2 2" 2.54” 200 1.60 20% GA 45HW-3 3" 3.58” 150 2.25 20%

100 100 75 70 60

28.0 28.0 28.0 28.0 28.0

Note: Use of 12” of banding coil at the fitting will reduce flexing which is a common cause of hose failure at the connection. Weight Part No. I.D. O.D. Description * Std. Pkg. Per Ft. KA KLSR-2 2" 2.60” Kanaline SR Hose 100 .70 KA KLSR-3 3" 3.70” Kanaline SR Hose 100 1.13 KA KLSR-4 4" 4.78” Kanaline SR Hose 100 1.74 KA KLSR-6 6" 7.17” Kanaline SR Hose 60 3.88 KA KLSR-8 8" 9.34” Kanaline SR Hose 20 5.54

(800) 228-9666

Also Approved for DEF - Must Use Stainless Fittings Min. Bend Part No. I.D. O.D. Radius GD N2700-1 1” 1.45” 4” GD N2700-1-1/4 1-1/4” 1.69” 4.5” GD N2700-1-1/2 1-1/2” 1.95” 5” GD N2700-2 2” 2.47” 6” GD N2700-3 3” 3.57” 9”

Wt/ 100’ Std. Per Foot Ft. Pkg. Disc. RETAIL .57 20% $ 21.71 .72 20% 23.45 .82 20% 27.20 1.03 20% 27.47 1.87 20% 39.80

EPDM for Herbicides

First Quality HERBICIDE HOSES Pre-Coupled, No Clamps Part No.

Please remember there are No Returns on customer specified cut lengths of hose.

DULTMEIER SALES • OMAHA, NE

Provides outstanding flexibility and chemical resistance. Ultra high molecular weight polyethylene tube (VHMWPE) which is superior to cross-linked polyethylene hoses - gives a very tight bend radius, light weight, and will handle up to 98% of chemicals. Multiple high tensile textile braids, green EPDM abrasion-resistant cover, pressures to 250 psi, and good heat resistance.-40˚ F.to +180˚ F. 92% of full vacuum. Available in coupled or cut lengths to 100'.

Hose Assemblies

Per Foot RETAIL $ 6.16 7.37 10.99 22.45 39.13

* 20% Package Discount on 2” - 6” Sizes. Package Discount Has Been Applied to Larger Sizes.

IND

100’ Std. Per Foot Pkg. Disc. RETAIL 20% $ 18.36 20% 32.03

N2700 Chemical Hose

“Kemflex”

Inside Outside Min. Working Vacuum Dia. Dia. Bend Radius Pressure Rating Inches Inches 72°F, Inches 72°F, PSI 72°F, In/Hg 4.0 6.3 7.1 10.2 15.7

– Suitable for DEF –

Blue Thunder Hose Min. Bend Part No. Size I.D. O.D. Radius PA 7373T-1 1" 1.0" 1.48” 3" PA 7373T-3 3” 3.0” 3.65” 7”

Heavy-duty Suction and Discharge Hose for applications requiring vacuum and higher working pressures than other PVC hoses. Flexible design features rigid PVC helix support. Smooth internal bore with corrugated cover. Clear sidewall permits visual check of material flow. Temperature Range: -13˚F. to +140˚F. Cut Lengths Sold in 5’ Increments Only (4” and Less).

2.60 3.70 4.78 7.17 9.34

Tube: Blue Ultra High Molecular Weight Polyethylene (UHMW) Reinforcement: Textile Plies with Helix Wire Cover: Corrugated Blue EPDM Temperature Range: -40° F. to +250° F. Working Pressure: 200 PSI

RETAIL $ 67.67 80.40 88.44 119.93 138.69 156.45 187.27 249.24 349.74

Kanaline SR Heavy Duty Suction Hose

2 3 4 6 8

Blue Thunder™

This corrugated hose handles up to 98% of most chemicals. It provides flexibility and durability in chemical full suction and discharge applications. The blue Ultra HIgh Molecular Weight (UHMW) polyethylene tube will handle 98% of the most common chemicals without leaching and contaminating the product being conveyed.

Part No. I.D. Length PSI Wt./Lbs. DU BW200X20 2" 20’ 85 15 DU BW200X25 2” 25’ 85 18 DU BW200X30 2” 30’ 85 22 DU BW300X20 3” 20’ 75 27 DU BW300X25 3” 25’ 75 32 DU BW300X30 3” 30’ 75 38 DU BW400X20 4” 20’ 65 42 DU BW400X30 4” 30’ 65 60 DU BW600X20 6” 20’ 45 60

Per Foot RETAIL $ 15.14 16.08 17.15 17.70 26.40

Acid Chemical Hose

Clear Suction/Discharge Hose Assemblies Flexible Clear Suction Hose Assemblies. General purpose PVC suction hose is ideally suited for water transfer, septic tanks, construction sites and many other uses. Clear tubing with a grey spiral. All assemblies are standard with a aluminum female lever coupler on one end and male adapter on the other end. Banded clamps ensure long life. Rated from -5° to +105° F. and 29” vacuum.

45HW handles 99% of all chemicals. Sulfuric Acid to 90% on intermittent transfer service only. Recommended For: Suction and discharge requiring a wide range of chemicals. Ask for Detailed List. Temperature Range: -40° to +250° F. Tube: Cross-linked Polyethylene. Reinforcement: 2-Ply synthetic fiber with a spiral wire. Cover: EPDM black with an orange and white stripe. Use permanent couplings above 125° F.

•

Description

RETAIL

GD HS2470 3/4” x 12’ Hose Assembly with 3/4” MPT,,,,,,, GD HS9379 1” x 12’ Hose Assembly with 1” MPT,,,,,,,,,,,,, GD HS9380 1” x 15’ Hose Assembly with 1” MPT,,,,,,,,,,,,,

www.dultmeier.com

• DAVENPORT, IA

(800) 553-6975

$ 36.72 40.47 47.17

E0891

Chemical Hose

Series 2410 UHMW Chemical Hose

Series 2430 Modified XLPE Chemical Hose

Applications: This clear high molecular weight (UHMW) polyethylene tube will handle 98% of the most common chemical without leaching and contaminating the product being conveyed. Refer to the chemical guide to determine compatibility with chemicals and applications. Rated to 200 PSI.

Series 2430 is excellent for the transfer of corrosive chemicals. The modified cross-link polyethylene tube stock is designed to handle over 98% of all chemicals and provide the very best in maintaining a tight seal and superior coupling retention. It is extremely flexible and the superior bend radius allows for easy handling and long lasting performance. Rated to 200 PSI (3” is 150 PSI).

D D

Tube: Opaque ultra-high molecular weight polyethylene Cover: Corrugated Blue EPDM

Tube: Modified cross-link polyethylene

Reinforcement: Multiple textile plies with dual wire helix

Cover: Black Corrugated EPDM

Std. Pkg. Working Wt./ of 100’ Per Foot Part No. I.D. O.D. Bend Pressure (Lbs./Ft.) Discount RETAIL GP 2410-3/4 3/4" 1.22” 3.5 200 PSI .42 20% $ 10.45 GP 2410-1 1” 1.46” 4.0 200 PSI .48 20% 11.93 GP 2410-1-1/4 1-1/4” 1.77” 4.0 200 PSI .71 20% 13.40 GP 2410-1-1/2 1-1/2” 2.01” 5.0 200 PSI .81 20% 14.47 GP 2410-2 2” 2.56” 6.0 200 PSI 1.17 20% 18.22 GP 2410-3 3” 3.62” 9.0 150 PSI 2.01 20% 26.80 GP 2410-2X20 2” X 20’ Hose Assembly with 316SS Male x Female Ends....... 536.00

Reinforcement: Multiple textile plies with dual wire helix Temperature: -40° F. to +250° F. (-40° C. to +121° C.) Std. Pkg. Working Wt./ of 100’ Per Foot Part No. I.D. O.D. Bend Pressure (Lbs./Ft.) Discount RETAIL GP 2430-1 1" 1.50” 4.0 200 PSI .50 20% $ 18.22 GP 2430-1-1/2 1-1/2” 2.04” 5.0 200 PSI .87 20% 19.83 GP 2430-2 2” 2.54” 7.0 200 PSI 1.08 20% 23.45 GP 2430-3 3” 3.58” 10.0 150 PSI 1.81 20% 34.17 GP 2430-2X20 2” X 20’ Hose Assembly with 316SS Male x Female Ends....... 636.50

Other Assemblies Available!

Series 2425 X-Link Chemical Hose Applications: Cross-link chemical hose solves most chemical handling problems. The tube compound is resistant to 90% of chemicals, solvents and petroleum products used in industry. The heavy wall resists kinking and crushing for extra safety. Refer to the chemical guide to determine compatibility with chemicals and applications. Rated to 150 PSI.

Series 2450 Teflon Lined Chemical Hose Applications: Recommended for the transfer of products that require a hose tube with the highest level of chemical resistance. The smooth bore design is ideal for the unrestricted transfer of fluids and promotes draining and cleaning. The hose is reinforced with multiple plies of polyester yarn with dual wire helix. This reinforcing combination provides full vacuum capabilities, kink resistance and high working pressure ratings. Other cover colors are available (red, black, gray, yellow, green and white). Meets or exceeds the requirements of FDA and USDA under 21 CFR 177, 1550, 3-A sanitary standards 10-15.

Tube: Cross-linked polyethylene Cover: Smooth Green EPDM Reinforcement: Multiple textile plies with dual wire helix

Std. Pkg. Working Wt./ of 100’ Per Foot Part No. I.D. O.D. Bend Pressure (Lbs./Ft.) Discount RETAIL GP 2425-3/4 3/4" 1.26” 4.0 200 PSI .50 20% $ 9.78 GP 2425-1 1” 1.50” 5.0 200 PSI .55 20% 10.18 GP 2425-1-1/4 1-1/4” 1.77” 6.5 200 PSI .75 20% 12.19 GP 2425-1-1/2 1-1/2” 2.01” 8.0 200 PSI .89 20% 14.20 GP 2425-2 2” 2.56” 10.0 150 PSI 1.18 20% 16.08 GP 2425-2X20 2” X 20’ Hose Assembly with 316SS Male x Female Ends....... 497.14

Tube: Teflon® (FEP) backed with modified XLPE Cover: Blue EPDM Reinforcement: Multiple textile plies with dual wire helix Std. Pkg. Working Wt./ of 100’ Part No. I.D. O.D. Bend Pressure (Lbs./Ft.) Discount GP 2450-3/4 3/4" 1.29” 4.0 200 PSI .52 20% CALL GP 2450-1 1” 1.56” 5.0 200 PSI .63 20% for GP 2450-1-1/2 1-1/2” 2.05” 8.0 200 PSI .93 20% GP 2450-2 2” 2.55” 9.0 200 PSI 1.14 20% PRICING 16.08GP 2450-3 3” 3.59” 18.0 150 PSI 1.77 20% GP 2450-2X20 2” X 20’ Hose Assembly with 316SS Male x Female Ends.......

Other Assemblies Available!

We now have our Catalogs as well as Parts Schematics online!

Other Assemblies Available!

Custom Stainless Steel Crimped Hose Assemblies Available !

www.dultmeier.com

Please remember there are No Returns on customer specified cut lengths of hose.

IND

DULTMEIER SALES • OMAHA, NE

(800) 228-9666

•

www.dultmeier.com

• DAVENPORT, IA

(800) 553-6975

E1234

Tubing & High Pressure Hose

EVA Applicator Tubing

High Pressure Spray Hose

Translucent & Black V1160 EVA Tubing for the safe handling of: Anhydrous Ammonia, Ammonium Nitrate, Aqua Ammonia, Liquid Fertilizer Solutions, Herbicides, Insecticides, Phosphates, Phosphoric Acid and Potassium Products. For up to 26" of vacuum. Flexible to -30° F. Will not crack to -75° F. Sold in Standard Packages ONLY.

Reel Part No. I.D. Length Wt. Color GD V1160-1/4 1/4” 100' 4 lbs. Clear GD V1160-1/4X500 1/4” 500’ 17 lbs. Clear GD V1160-3/8 3/8" 500' 26 lbs. Clear GD VB1170-3/8 * 3/8" 500' 26 lbs. Black GD V100X3/8 3/8” 100' 9 lbs. Clear GD V1160-1/2X500 1/2" 500' 30 lbs. Clear GD VB1170-1/2X500 * 1/2" 500' 30 lbs. Black GD V100X1/2 1/2” 100' 11 lbs. Clear GD V1160-3/4X250 3/4" 250' 30 lbs. Clear GD V1160-1 1" 100' 30 lbs. Clear

Per Reel RETAIL $ 38.46 159.13 211.72 211.72 43.55 243.88 263.98 54.81 222.44 108.54

* Black Tubing. NOTE: E VA tubing is priced and sold in full reels only. 3/8" & 1/2" are available in 100' Packages. Working pressure @ 70˚F= 75 PSI thru 1/2”, 60 PSI 3/4”-1”

Braided EVA Tubing Reinforced EVA Tubing is designed to transport a variety of chemicals and liquids.Translucent for easy view of flows. Higher working pressure than unbraided tubing.

Lightweight and flexible. Not suitable for gasoline or diesel. Rated from -30° to +125° F. Formulated to comply with FDA and RoHSrequirements. Polyester yarn reinforcement. Natural color. Sold by the foot or in standard packages for lower pricing. Max Psi * Std. Per Foot Part No. I.D. O.D. @ 70° F. Pkg. RETAIL TF EVAB14 1/4" .460” 250 PSI 300’ $ 0.54 TF EVAB38 3/8" .594” 250 PSI 300’ 0.60 TF EVAB50 1/2" .720” 250 PSI 300’ 0.80 TF EVAB75 3/4" 1.00” 150 PSI 200’ 1.14 TF EVAB100 1" 1.312” 150 PSI 200’ 2.22 * 20% Discount for Standard Package.

A bright yellow hose for agricultural, commercial and pest control spraying. Has ribbed PVC cover with black PVC/Polyurethane blend tube for excellent chemical resistance including aromatic hydrocarbon based products. Specifications: Pin pricked cover to vent vapor and prevent ballooning • 600 PSI Rating • Temperature range is +15°F. to +160°F. (Specify A1687 - 800 PSI Series for tree spraying.) Standard stock coil size is 300', but is available in 400'. Note: Reusable type fittings are not recommended.

Part No. I.D. & Description O.D. PSI @70° F. Wt. RETAIL DU A1661-3/8 3/8" ID Cut Lengths 0.65" 600 14/C $ 1.55 DU A1661-1/2 1/2" ID Cut Lengths 0.79" 600 19/C 2.09 DU A1661-3/4 3/4" ID Cut Lengths 1.17" 600 35/C 3.77 TF A1661-06 3/8" x 300' Coil 0.65" 600 41 lbs. 364.48 TF A1661-06X ** 3/8” x 300” Hose Assembly, Yellow - 466.32 TF A1661-06-400 3/8" x 400' Coil 0.65" 600 55 lbs. 495.80 TF A1661-08 1/2" x 300' Coil 0.79" 600 57 lbs. 491.78 TF A1661-08-400 1/2” x 400’ Coil 0.79” 600 76 lbs. 657.94 TF A1661-08X ** 1/2” x 300’ Hose Assembly, Yellow - 597.64 TF A1661-10 5/8" x 300' Coil 1.03" 600 82 lbs. 719.58 TF A1661-12 3/4" x 300' Coil 1.17" 600 106 lbs. 908.52 TF A1687-08 * 1/2" x 300' Coil 0.79" 800 57 lbs. 719.58 TF A1687-12 * 3/4" x 300' Coil 1.17" 800 106 lbs. 1116.22 TF A1628-16 † 1" x 200' Coil 1.5" 200 65 lbs. 485.08

Clear Vinyl Tubing D

Clear Vinyl Tubing is flexible, lightweight and transparent. Provides full flow viewing. Construction is Polyvinyl Chloride (PVC). Ideal for handling a wide variety of liquids. Excellent resistance to many types of acids, detergents and alkalies. Formulated to comply with FDA and RoHS requirements. Rated from +25° to 150° F. Sold in rolls only, no cut lengths. Part No. I.D. O.D. Wall

Braided Vinyl Tubing

Sold by the Foot with Discounts for Standard Package Purchase.

Cover: Bright Yellow PVC Tube: PVC/Polyurethane Blend Excellent for use on a Hose Reel

* Green. † Gray ** Includes 3/8” or 1/2” Steel MNPT ends, crimped style. D

EVAB x 1-Braid

Chemical Resistant

Reinforced Vinyl (PVC) Tubing is flexible and translucent. Higher work pressures than unbraided tubing. Designed for a variety of chemicals and liquids. Natural color permits viewing of flow. Rated to +25° to +150° F. NSF51 and 61 dual certified. Max PSI * Std. Per Foot Part No. I.D. O.D. @ 70° F. Pkg. RETAIL TF RF014 1/4" .438” 250 300' $ 0.40 TF RF038 3/8" .594” 250 300' 0.60 TF RF050 1/2" .750” 200 300' 0.83 TF RF075 3/4" 1.025” 150 100' 1.27 TF RF100 1" 1.312” 125 100' 1.89 TF RF125 1-1/4" 1.937” 100 100' 3.30 TF RF150 1-1/2” 1.656” 100 100’ 4.11 * 20% Discount for Standard Package Purchase.

TF 1A 1/8" 1/4” 1/16” TF 1 1/4" 3/8” 1/16" TF 1X500 1/4” 3/8” 1/16” TF 2 3/8" 1/2” 1/16” TF 2X500 3/8” 1/2” 1/16” TF 2A 3/8” 9/16” 3/32” TF 4A 1/2" 5/8” 1/16” TF 4 1/2” 3/4” 1/8” TF 6 5/8” 13/16” 3/32” TF 5 5/8" 7/8” 1/8” TF 7 3/4" 1” 1/8” TF 9 1" 1-1/4” 1/8” TF 11 1-1/4" 1-1/2” 1/8” TF 13 1-1/2" 1-3/4” 1/8” TF 13A 1-1/2” 2” 1/4" TF 15 2” 2-1/2” 1/4”

Clear PVC reinforced with a spring wire. One piece construction that embeds the spring wire reinforcement

Per Roll RETAIL

100' $ 9.45 100' 14.41 500’ 67.67 100' 20.23 500’ 108.54 100’ 32.70 100' 24.92 100’ 51.19 100’ 45.16 100' 60.70 100' 69.01 100' 86.43 50' 58.69 50' 74.37 50’ 139.03 50’ 176.55

• For transfer of air, water, & mild water soluble chemicals. • Ideal for indoor & outdoor applications.

NOTE: CUT LENGTHS SOLD IN 5’ INCREMENTS ONLY

DULTMEIER SALES • OMAHA, NE

(800) 228-9666

• Excellent air supply line for pneumatic & spray systems.

• Low temperature flexibility. • Rated to 300 PSI at 70° F. & 150 PSI at 120° F.

Max. PSI Std. * Std.Pkg. Per Foot Part No. I.D. O.D. @ 70° F. Pkg. DISCOUNT RETAIL TF WF014 1/4" .447” 100 100' 20% $ 0.94 TF WF038 3/8" .600” 100 100' 20% 1.35 TF WF050 1/2" .736” 100 100' 20% 1.89 TF WF075 3/4" 1.028” 70 100' 20% 2.96 TF WF100 1" 1.290” 70 100' 20% 3.77 * 20% Discount for Standard Package Purchase.

IND

65 50 50 40 40 50 25 45 30 40 35 25 20 16 35 30

Roll Size

Rubber Air Hose Assemblies

Vinyl Poly Spring® Tubing Features: Anti-collapsible. • Antikinking. • Full Vacuum rating. • Light-weight. • Chemical resistant. • Ozone and atmospheric resistant. • Temperature range +25° to +150° F. • FDA/USDA Rated.

Max. PSI @ 70°F

Part No.

RETAIL

DU AH25 3/8" ID. x 25' $ 19.70 DU AH50 3/8" ID. x 50' 34.04

•

www.dultmeier.com

• DAVENPORT, IA

• Temperature Range: -15° F. to +150° F. • 1/4" MPT Fittings

(800) 553-6975

E0309

Air • Water Hose PVC Air/Water Hose Assemblies

General Purpose Air/Water Hose

Ideal for Medium Duty Air & Water Applications Industrial Air/Water Hose Assemblies. Looks and feels like rubber. Low temperature flexibility. Reinforced PVC construction. Ideal for medium-duty air and water applications. Rated to 300 PSI at 70° F. Standard with 1/4” male x male fittings on all sizes. Rated from +25° to +150° F. Made in the USA.

Part No. TF KF2-R025CP TF KF2-R050CP TF KF2-R100CP TF KF3-R025CP TF KF3-R050CP TF KF3-R100CP

Size 1/4" x 25’ 1/4” x 50’ 1/4” x 100’ 3/8” x 25’ 3/8” x 50’ 3/8” x 100’

Color Red Red Red Red Red Red

RETAIL $ 9.58 15.01 26.93 9.98 15.68 28.41

Kuritech Truespray Will Reduce Unwanted Herbicide Damage

Max PSI Std. * Std. Pkg. Part No. I.D. O.D. @ 70° F. Pkg. Discount TF ATH-0140B 1/4" .500” 300 300' 20% TF ATH-0380B 3/8” .625” 300 300’ 20% TF ATH-0120B 1/2” .750” 300 300’ 20% TF ATH-0340B 3/4” 1.06” 250 300’ 20% TF ATH-1000B 1” 1.33” 150 300’ 20% * 20% Discount for Standard Packages

Excellent for agricultural chemicals, high pressure tree spraying, paints and solvents. Blue cover and available in 100/300 ft. package only - NO CUTS. 800 PSI, -40° F. to 130° F. Use standard poly/stainless hose barb fittings with outside clamps. Do Not Use Hydraulic Fittings on this Hose. Wt. 11 lbs. 33 lbs. 15 lbs. 45 lbs. 24 lbs. 72 lbs. 32 lbs. 65 lbs.

• Rated to 300 PSI @ 70° F. 200 PSI on 3/4”

• Lightweight & Flexible

• Blue PVC

• Temperature Rating: 15˚ F. to 150˚ F.

• Abrasion Resistant

Much less retention/absorption of Dicamba with this polyethylene lined rubber blend hose when compared to other rubber/PVC/EPDM hoses. The permeation-resistant inner liner provides superior clean out. Field tests show a significant reduction in yield loss from herbicide carryover.

Part No. Size Length TF A4086-06X100 3/8” 100’ TF A4086-06X300 3/8” 300’ TF A4086-08X100 1/2” 100’ TF A4086-08X300 1/2” 300’ TF A4086-12X100 3/4” 100’ TF A4086-12X300 3/4” 300’ TF A4086-16X100 1” 100’ TF A4086-16X200 1” 200’

ATH Series Industrial Air/Water Hose. Polyvinyl Chloride (PVC) construction with polyester yarn braided reinforcement. Formulated for medium-duty industrial applications at temperatures from +25° to +150° F. Sold by the foot or in standard packages at lower pricing. Color is blue. Made in USA. Per Foot RETAIL $ 0.34 0.40 0.54 1.14 1.55

Bulk Air/Water Hose

AgChemical Hose

• One Piece Reels

Part No. I.D. O.D.

TF K1156-1/4 TF K1156-3/8 TF K1156-1/2 TF K1156-3/4

1/4" .500” 3/8” .625” 1/2” .750” 3/4” 1.030”

Feet Wt. Per Foot Per Reel Per Reel RETAIL

500' 500' 500' 300'

44 lbs. 56 lbs. 70 lbs. 72 lbs.

$ 0.54 0.54 0.80 1.35

20% Discount for Full Reel Purchase

POLYAIR Air/Water Hose

RETAIL $ 1.89 1.89 2.69 2.69 4.45 4.45 5.79 5.79

Bulk or Assemblies D

A very flexible air/water hose. The PVC blending makes this hose look and feel like a rubber hose. Stays flexible at low temperatures.

Visit Us On the Internet!

Features: Lightweight and easily recoiled after use • Can be used for outdoor low temperature applications • Non-marking cover • PVC cover and tube with spiral braid polyester yarn • Temperature Rating from -15° F. to +150° F. • Stocked in red • UV resistant • Solid x Swivel ends on all assemblies. Part No.

Red PVC Hose PSI I.D. O.D. @ 70° F.

TF K1134-1/4 TF K1134-3/8 TF K1134-1/2 TF K1134-3/4 TF K1134-1 TF AH-3/4X25 TF AH-3/4X50 TF AH-3/4X100 TF AH-1X25 TF AH-1X50 TF AH-1X100

* Std. Wt. Per Pkg. Reel RETAIL

1/4” .500” 300 500 44 lbs. 3/8” .625” 300 500 58 lbs. 1/2” .813” 300 500 93 lbs. 3/4” 1.125” 250 300 96 lbs. 1” 1.406” 250 300 123 lbs. 3/4” x 25’ Red Air Hose, 3/4” MPT........... 3/4” x 50’ Red Air Hose, 3/4” MPT........... 3/4” x 100’ Red Air Hose, 3/4” MPT......... 1” x 25’ Red Air Hose, 1” MPT................. 1” x 50’ Red Air Hose, 1” MPT................. 1” x 100’ Red Air Hose, 1” MPT...............

$ 0.80 0.80 1.07 2.02 2.43 127.97 171.52 259.96 166.16 190.28 317.58

* 20% Discount for Full Reel Purchase

dultmeier.com

Please remember there are No Returns on customer specified cut lengths of hose.

View this catalog & Order on-line! IND

DULTMEIER SALES • OMAHA, NE

(800) 228-9666

•

www.dultmeier.com

• DAVENPORT, IA

(800) 553-6975

E0313

Air & Sandblast Hose & Couplings • Hose Cutters Self-Storing Coil Hoses

Ultra Lightweight, Ultra Flexible PVC Hose

POLYURETHANE

An excellent general purpose hose for water, air, lubricated air, light chemicals, anti-freeze and some acids. Standard with a blue cover.

Ideal for use as air hoses. Stretch them out to use them and they self coil when you are finished. Polyurethane construction is highly kink and abrasion resistant with strength and flexibility. Superior oil resistance. Each assembly comes standard with one swivel end and one solid end protected by bend restrictors. All hoses feature a 4" pigtail on one end and a 20" on the other. Rated to 140 psi. 1/4" hoses feature 1/4" MPT fittings. 3/8" ID hoses feature 3/8" MPT fittings. Replacement fittings are also available. Temperature Range is -68° F. to 140° F. Working Overall Part No. Color I.D. Length Length RETAIL TF A1001B Blue 1/4" 15' 18' $ 19.97 TF A1001BK Black 1/4" 15' 18' 19.97 TF A1001C Clear 1/4" 15' 18' 19.97 TF A1001R Red 1/4" 15' 18' 19.97 TF A1001Y Yellow 1/4" 15' 18' 19.97 TF A1002B Blue 1/4" 25' 31' 29.75 TF A1002BK Black 1/4" 25' 31' 29.75 TF A1002C Clear 1/4" 25' 31' 29.75 TF A1002R Red 1/4" 25' 31' 29.75 TF A1002Y Yellow 1/4" 25' 31' 29.75 TF A1012C Clear 1/4" 35' 40' 37.39 TF A1007B Blue 3/8" 15' 18' 43.15 TF A1007BK Black 3/8" 15' 18' 43.15 TF A1007C Clear 3/8" 15' 18' 39.80 TF A1007R Red 3/8" 15' 18' 43.15 TF A1007Y Yellow 3/8" 15' 18' 43.15 TF A1008B Blue 3/8" 25' 31' 56.68 TF A1008BK Black 3/8" 25' 31' 56.68 TF A1008C Clear 3/8" 25' 31' 56.68 TF A1008R Red 3/8" 25' 31' 56.68 TF A1008Y Yellow 3/8" 25' 31' 56.68 TF A1011C Clear 3/8" 35' - 78.39

• Exceptionally Flexible & Lightweight

• Highly Resistant to UV Rays & Ozone

• PVC Cover is Non-Marking with Excellent Abrasion & TearResistance

• Non-Conductive & Flame Retardant

NOTE: CUT LENGTHS SOLD IN 5’ INCREMENTS ONLY D

Hose Hose Full Full Reel Part No. I.D. O.D. Reel Discount PA GPH-38 3/8” 0.64” 500’ 20% PA GPH-12 1/2” 0.80” 500’ 20%

Part No. TF T751-075 3/4" I.D. x 1-1/2" O.D.

VERSATILE

“FLEXI-HOSE” for Automobile and Industrial use. Maximum working pressure up to 200 PSI. Operates all types of hand air tools efficiently and dependably. Fully equipped with spring guards, tube inserts and standard compression fittings. Retractability eliminates the danger of dragging air hose which can cause accidents. Temperature is 180° F. AM A761 AM A762 AM A763 AM A764 AM A765

Fitted

ID & MPT

Length

RETAIL

Flex Hose Flex Hose Flex Hose Flex Hose Flex Hose

1/4" 1/4" 3/8” 3/8" 3/8"

12' 25' 12’ 25' 50'

$ 12.13 18.22 16.21 29.75 44.22

- Plated Iron -

Economy Tube Cutter

D D

SL100YT TSNIP & SL200 SL100YT & SL200 are light weight spring action cutters with a safety latch for closing. The SL100YT cuts up to 1” O.D. and the SL200 cuts to 2” O.D. TSNIP is an economy tubing cutter. For up to 1/2” O.D.

IND

Orange Cutter with Blade that cuts up to 1”.............. Black Cutter with Blade that cuts up to 2”................. Economy Tube Cutter................................................. Replacement Blade for SL100YT.............................. Replacement Blade for SL200................................... DULTMEIER SALES • OMAHA, NE

Male NPT Ends

Female NPT Ends

Malleable Iron Clamps

COUPLINGS FOR USE UP TO 150 PSI - Not for Use With Steam -

Pipe/Hose/Tubing Cutters

Part No. EV SL100YT EV SL200 LM TSNIP EV BT100 EV SSB200

Hose Ends

The perfect tools for cutting hose, tubing or plastic pipe. Enables you to get a smooth, straight cut every time. Hose Cutter

Per Foot RETAIL $ 5.65

Universal Air & Water Couplings

LIGHTWEIGHT

Part No.

T751 Heavy Duty Sandblast Hose. Sold in 25' & 50' lengths only.

ECONOMICAL Stretches & recoils

Per Foot RETAIL $ 1.76 2.22

Sandblast Hose

Nylon Air Hose

• Temperature Range: -15° F. to +150° F.

• PVC Tube with Two-Spiral Polyester Yarn for Strength

RETAIL $ 22.24 26.93 7.04 7.97 10.32

(800) 228-9666

Part No. Size RETAIL EV AM1 Hose End.................... 1/2" $ 6.16 EV AM6 Hose End.................... 3/4” 3.77 EV AM11 Hose End.................... 1" 4.31 EV AM2 Male NPT Ends........... 1/2” 6.97 EV AM7 Male NPT Ends........... 3/4" 7.10 EV AM12 Male NPT Ends........... 1" 7.37 EV AM3 Female NPT Ends....... 1/2” 6.70 EV AM8 Female NPT Ends....... 3/4" 6.97 EV AM13 Female NPT Ends....... 1" 4.18 EV AWR4 Washer........................ ALL 0.67 EV A9 Clamps 1-1/8" to 1-5/16" O.D. 8.84 EV A10 Clamps 1-5/16" to 1-1/2" O.D. 11.79

WASHER Same Size for all Coupling Sizes

•

www.dultmeier.com

• DAVENPORT, IA

(800) 553-6975

E1122

Poly Tubing

Polyethylene Tubing High Quality, Generic Polyethylene Tubing. Designed to work with all major tube fitting manufacturers. Superior stress and crack resistance. Compatible with a wide variety of chemicals and fluids (Not for Petroleum or Fuel Products). NSF 51 and 61 compliant for FDA food contact. Larger roll size mean very competitive pricing per foot. Multiple color options to meet your needs. Rated from -20° to +150° F. Sold in 1/4”, 3/8” and 1/2” sizes. 1000’, 500’ or 300’ reels as shown. No Cut Lengths. Sold in Coils Only.

Poly Tubing Polyethylene Tubing from John Guest. The same quality you have come to know and expect in their Tube Fittings is now available in their Poly Tubing. Much higher pressure ratings than standard poly tubing, in fact, this tubing is close to the pressure ratings of Nylon Tubing in both 1/4" and 3/8" sizes. Ideal for chemical run lines, water lines, misting systems, etc. (See Tube Fittings on following pages.)

Max. Coil Length Per Coil Part No. O.D. I.D. Color PSI Meters Ft. RETAIL EP DPE4N 1/4" .170" Natural 230 300 984’ $ 87.77 EP DPE4B 1/4” .170” Blue 230 300 984’ 87.77 EP DPE4Y 1/4” .170” Yellow 230 300 984’ 87.77 EP DPE4E 1/4” .170” Black 230 300 984’ 87.77 EP DPE4R 1/4” .170” Red 230 300 984’ 87.77 EP DPE4G 1/4” .170” Green 230 300 984’ 87.77 EP DPE6N 3/8” 1/4” Natural 170 150 492’ 102.51 EP DPE6B 3/8” 1/4” Blue 170 150 492’ 102.51 EP DPE6Y 3/8” 1/4” Yellow 170 150 492’ 102.51 EP DPE6E 3/8” 1/4” Black 170 150 492’ 102.51 EP DPE6R 3/8” 1/4” Red 170 150 492’ 102.51 EP DPE6G 3/8” 1/4” Green 170 150 492’ 102.51 EP DPE7N 1/2” 3/8” Natural 170 100 328’ 102.51 EP DPE7B 1/2” 3/8” Blue 170 100 328’ 102.51 EP DPE7Y 1/2” 3/8” Yellow 170 100 328’ 102.51 EP DPE7E 1/2” 3/8” Black 170 100 328’ 102.51 EP DPE7R 1/2” 3/8” Red 170 100 328’ 102.51

Features: FDA approved for food grade use & listed with NSF International Standard 51 & 61 • Maximum working temperature is 150° F. • PSI rating is 50 PSI less @150° F. • Available in a wide variety of colors so that you can differentiate between run lines or products • Sold in standard packages of 500' on 1/4" and 3/8" and 250' in 1/2" size. The black tubing shown is UV stabilized for outdoor use. Note: Tubing is not recommended for petroleum oils, mineral oils, or fuels.

Polypropylene Tubing • Excellent Choice for Chemical Supply Lines • Handles High Temperatures & Pressure • Lasts Longer Than Nylon in Hot Water Service • Excellent Resistance to Acids & Hot Water • Flexible & Dimensionally Stable • Excellent Resistance to Chlorinated Water • Good Resistance to Vegetable Oils

Polypropylene Tubing from Parker is an excellent choice for chemical supply lines. Handles higher temperatures and pressures than Polyethylene tubing. Lasts many times longer than nylon in hot water service. Excellent resistance to acids and hot water. Flexible and dimensionally stable. Excellent resistance to chlorinated water. Good resistance to vegetable oils. Available in white or UV-Resistant black. Sold in 500’ or 250’ rolls as noted. White tubing is FDA and NSF listed. Black tubing has superior ultra-violet resistance. Temperature range from 0° to 200° F. No Cut Lengths. Max. PSI. Part No. O.D. I.D. @ 73° F. PA PP43 1/4" .170" 300 PA PP64 3/8” .250” 300 PA PP86 1/2” .375” 225 PA PPB43 1/4” .170” 300 PA PPB64 3/8” .250” 300 PA PPB86 1/2” .375” 225

Coil Per Coil Color Length RETAIL White 500' $ 159.13 White 500’ 351.08 White 250’ 292.12 Black 500’ 160.47 Black 500’ 304.18 Black 250’ 290.78

Sold In Coils Only

Polyurethane Tubing • Excellent Choice for General Purpose / Pneumatic Applications • Tough, Strong & Kink & Abrasion-Resistant

• Excellent Flexibility • Shares the Best Properties of Rubber & Plastic

Sold in 100’ or 250’ coils as noted. Stock color is natural clear. Over 25 color options are available. Sold in Coils Only. No Cut Lengths.

IND

Coil Per Coil Color Length RETAIL Clear 250' $ 141.71 Clear 100’ 105.86

DULTMEIER SALES • OMAHA, NE

(800) 228-9666

Coil Per Coil Color Length RETAIL Natural 500' $ 73.03 Blue 500' 74.37 Green 500' 74.37 Orange 500’ 74.37 Red 500' 74.37 Yellow 500' 74.37 Black 500' 74.37 White 500' 74.37 Black 500’ 131.32 Natural 500' 157.79 Blue 500' 157.79 Green 500' 157.79 Red 500' 157.79 Yellow 500' 157.79 Black 500' 157.79 Orange 500' 157.79 White 500' 157.79 Natural 250' 121.27 Blue 250' 121.27 Red 250' 121.27 Black 250' 121.27

* Black is UV Stabilized.

Tubing is sold in standard coils only. No Cut Lengths.

Polyethylene & Nylon Tubing Polyethylene Tubing: Widely used for industrial, agricultural and chemical applications. Good resistance to D alkalies, dilute acids, ammonia gas, brine water, etc. Tubing is measured in O.D. vs. hose in I.D. Temperature range is - 50° to +140° F. Available in black or natural semi-clear. FDA approved for food grade use. Sold in 100' & 1,000’ coils. No Cut Lengths. Nylon Tubing: Excellent resistance to chemicals, oils, solvents, gasoline, hydraulic fluids, salt solutions, and bases. Temperature range is - 60° to + 200° F. High abrasion and heat resistance. Tubing is measured in O.D. vs. hose in I.D. NOT approved for food grade use. Available in black, natural semi-clear or navy blue. (1000' coils in some sizes as shown).

Polyurethane Tubing from Parker is an excellent choice for general air/pneumatic applications. Tough, strong, kink and abrasion resistant. Excellent flexibility. This unique tubing shares the best properties of both rubber and plastic. Rated from -40° F. to +180° F.

Max. PSI. Part No. O.D. I.D. @ 73° F. PA U42 1/4" .125" 125 PA U64 3/8” .250” 125

Max. PSI. Part No. O.D. I.D. @ 70° F. LM PE08N 1/4" .170" 230 LM PE08B 1/4" .170" 230 LM PE08G 1/4" .170" 230 LM PE08O 1/4” .170” 230 LM PE08R 1/4" .170" 230 LM PE08Y 1/4" .170" 230 LM PE08E * 1/4" .170" 230 LM PE08W 1/4” .170” 230 LM PE10E 5/16” .187” 230 LM PE12N 3/8" .250" 150 LM PE12B 3/8" .250" 150 LM PE12G 3/8" .250" 150 LM PE12R 3/8" .250" 150 LM PE12Y 3/8" .250" 150 LM PE12E * 3/8" .250" 150 LM PE12O 3/8" .250" 150 LM PE12W 3/8" .250" 150 LM PE16N 1/2" .375" 150 LM PE16B 1/2" .375" 150 LM PE16R 1/2" .375" 150 LM PE16E * 1/2" .375" 150

•

Max. PSI Part No. Type O.D. I.D. @ 70° F. Color FC UP44-100N Poly 1/4" .170" 150 PSI Natural FC UP44-1000N * Poly 1/4” .170” 150 PSI Natural FC UP66-100N Poly 3/8" .250" 150 PSI Natural FC UP66-1000N * Poly 3/8” .250” 150 PSI Natural FC UP86-100N Poly 1/2" .375" 125 PSI Natural FC UP44-100B Poly 1/4" .170" 150 PSI Black FC UP44-1000B * Poly 1/4” .170” 150 PSI Black FC UP66-100B Poly 3/8" .250" 150 PSI Black FC UP86-100B Poly 1/2" .375" 125 PSI Black FC UN204-100BL Nylon 1/4” .180” 290 PSI Dark Blue FC UN206-100BL Nylon 3/8” .275” 250 PSI Dark Blue FC UN202-100N Nylon 1/8" .080" 420 PSI Natural FC UN204-100N Nylon 1/4" .180" 290 PSI Natural FC UN206-100N Nylon 3/8" .275" 250 PSI Natural FC UN208-100N Nylon 1/2" .375" 240 PSI Natural FC UN202-100B Nylon 1/8" .080" 420 PSI Black FC UN204-100B Nylon 1/4" .180" 290 PSI Black FC UN206-100B Nylon 3/8" .275" 250 PSI Black FC UN208-100B Nylon 1/2" .375" 240 PSI Black * 1000’ Coils.

www.dultmeier.com

• DAVENPORT, IA

(800) 553-6975

Per Coil RETAIL $ 8.64 81.74 18.49 156.45 25.46 8.24 75.71 16.82 24.05 46.90 102.51 21.17 46.90 102.51 168.51 21.17 46.90 102.51 168.51

E0307

Specialty & Garden Hose

Push-Lok Hose

Air Seeder Hose Flexible Polyurethane Lined PVC Hose for air seeders, abrasive material vacuum systems and industrial vac equipment. Smooth bore, PVC corrugated OD. Lightweight and flexible in cold temperatures to -13° F. Clear with orange or black helix. The urethane lined tube provides abrasion-resistance, visual check of material flow and prevents material build up. Banding coils and CW spiral clamps are available for end connections.

Push-Lok Plus Hose from Parker. Premium, leak-free, hose solutions to your low pressure plumbing needs. Easy-to-assemble, no clamps or special tools needed. Ideal for liquids and air. Internal tube is resistant to petroleum based oils. Outer cover has excellent flexibility and abrasion resistance. Stock color is blue, but (5) other colors are available if ordered in full reels. Reusable, brass push-lok fittings are shown elsewhere in this catalog. Sold by the foot or in reels at additional discount. Rated to 158° F. on air or 185° F. on water solutions. Inner Liner is an extruded, synthetic rubber, making it resistant to petroleum-based oil, air & water.

Barbed Push-Lok fitting seals tightly, securely.

High-Quality elastomer cover - lively feel, excellent flexibility & resistance to abrasion.

Fiber braid reinforcement layer is impregnated with synthetic rubber for added durability.

I.D. O.D. Max. * Std. Per Foot Part No. Size Size PSI Pkg. RETAIL

Blue Push-Lok Hose 1/4” .50” 350 600’ $ 2.16 Blue Push-Lok Hose 3/8” .63” 350 450’ 2.49 Blue Push-Lok Hose 1/2” .78” 300 300’ 3.10 Blue Push-Lok Hose 3/4” 1.03” 300 200’ 5.32 Blue Push-Lok Hose 1” 1.28” 200 200’ 6.90 * 10% Discount for Full Reel Purchase. I.E. 3/8” Full Reel is 801-6-BL-RL at Less 10% Per Foot.

Wt. per 100'

D D

HWH Wash Down Hose

Steam Hose PARKER Steam Hose for long lasting service with saturated and superheated steam. EPDM tube and wire braid reinforcement for crush resistant durability, kink resistance and static electrical charge to ground.

Black EPDM cover is resistant to abrasion, cracking, hardening and ozone. Rated from -20° F. to +406° F. with saturated steam and +450° F. with superheated steam. Maximum 250 PSI. ** All sizes are sold by the foot in 5 ft. minimum increments. Use with Dixon Boss fittings for assembly in the field. * Discount for 50 ft. Packs All Sizes. * Per Ft. I.D.

Couplings

Wts. Per Foot

RETAIL

PA 7263-502 1/2" Dixon Boss .48 lbs $ 5.59 PA 7263-752 3/4” Dixon Boss .66 lbs 6.77 PA 7263-1002 1” Dixon Boss .85 lbs 11.93 PA 7263E-1502 1-1/2” Dixon Boss 1.44 lbs 16.62 PA 7263E-2002 2” Dixon Boss 1.76 lbs 17.82 * 10% Discount for 50’ Pkgs. ** Sold in Increments of 5’ Only.

IND

CCH50: Golf Course Hose. Green PVC construction. Reinforced for kink resistance.Rated to 150 PSI.1” I.D.with 1” NPSH couplings.Available in 50’length.

Per Ft. RETAIL

GA 3222BL-1/4 1/4" .49" Blue 500'-700’ 8 lbs. $ 2.02 GA 3222BL-3/8 3/8" .63" Blue 500'-700’ 12 lbs. 2.43 GA 3222BL-1/2 1/2" .77" Blue 500'-700’ 15 lbs. 2.83 * Less 20% on Standard Package Purchase

Part No.

$ 4.31 5.98 8.84 4.31 5.98 8.84

CWH: Contractors Water Hoses. High flow 3/4” I.D. Rated to 200° F. and 200 PSI. Flexible even at cold temperatures. Black cover with 3/4” M x F brass garden hose fittings and one bend restrictor. Available in 50’, 100’, and 150’ x 3/4” I.D.

Maximum pressures to 300 PSI. Temperatures to 212° F. (for applications exceeding 160° F. clamps should be used). Vacuum rating to 30" Hg. Nitrile tube and cover have high oil resistance. Standard color is blue. Note: These hoses are not recommended for applications where vibration or pressure surges exist.

7263

KA 100UCLRD-2 Red 2" 2.36" 0.50 100 20% KA 100UCLRD-212 Red 2-1/2" 2.87" 0.71 100 20% KA 100UCLRD-3 Red 3" 3.50" 1.00 100 20% KA 100UCLBK-2 * Black 2” 2.36” .50 100 20% KA 100UCLBK-212 Black 2-1/2” 2.87” 0.71 100 20% KA 100UCLBK-3 * Black 3” 3.50” 1.00 100 20% * 3000 Ft. Minimum Run. — No Cut Lengths - Full Reels Only —

HWH: Washdown Garden Hoses. 5/8” I.D. Flexible even at cold temperatures. Rated to 200° F. and 200 PSI. Black rubber cover and 3/4” brass garden hose couplings with one bend restrictor. Available in 50’, 100’, and 150’ x 5/8” I.D.

3222

Wt. Std. Std. Pkg. Per Ft. Lbs. Pkg. Discount RETAIL

Industrial Garden Hose / Washdown Hose

Push-Lock Hose

* Std. Part No. I.D O.D. Color Pkg.

O.D.

See Also UF1 on Adjacent Page for Other Sizes

PA 801-4BL PA 801-6BL PA 801-8BL PA 801-12BL PA 801-16BL

Gates Lock-On Hose for use with Pushlock barb fittings. No clamps required. Designed for air, water, soap solutions.

Part No. Color I.D.

DULTMEIER SALES • OMAHA, NE

(800) 228-9666

CWH Contractors Water Hose

CCH50 Golf Course Hose D

Part No. Garden Hose Wt. RETAIL EV HWH50 5/8” x 50’ Washdown Hose............... 13 lbs. $ 65.66 EV HWH100 5/8” x 100’ Washdown Hose............... 25 lbs. 113.90 EV HWH150 5/8” x 150’ Washdown Hose............... 38 lbs. 163.15 EV CWH50 3/4" x 50' Contractors Hose.............. 18 lbs. 83.75 EV CWH100 3/4” x 100’ Contractors Hose.............. 36 lbs. 148.41 EV CWH150 3/4” x 150’ Contractors Hose.............. 54 lbs. 207.70 EV CCH50 1" x 50' Golf Course Hose............. 17 lbs. 187.60 Please remember there are No Returns on customer specified cut lengths of hose.

•

www.dultmeier.com

• DAVENPORT, IA

(800) 553-6975

E0312

Suction & Material Handling Hose All Weather Rubber Suction Discharge Hose

Material Handling Hose LIGHT DUTY • Abrasion-Resistant • Low-Temperature D

• Weatherproof • Smooth bore • Static dissipating

• Flexible • Lightweight • Economical

180BL Kanaflex Material Handling Hose is designed for grain clean-up, granular fertilizer, rock, wool, fiberglass or any lightweight abrasive material that can be moved by air pressure. It is also ideally suited for air-conditioning and ventilation ducting. T-Polymer compound dissipates static electricity build-up. Temperature range: -40° to 158° F. Also suited for dust control involved with woodworking, grain and cement handling or other situations where dust can be a job hazard. Not suitable for continuous grain handling applications. Use ducting clamps. Note: Use of 12” of banding coil at the fitting will reduce flexing which is a common cause of hose failure at the connection. Hose Weight per Part No. I.D. O.D. 100 Feet KA 180BL-3 3" 3.40" 80 lbs. KA 180BL-4 4" 4.44" 140 lbs. KA 180BL-5 5" 5.57" 168 lbs. KA 180BL-6 * 6" 6.67" 240 lbs. KA 180BL-8 * 8" 8.82" 360 lbs.

Std. Pkg. 100' 100' 50' 50' 50'

Std. Pkg. Discount 20% 20% 20% 20% 20%

HEAVY-DUTY Abrasion-Resistant Suction Hose is ideal for vacuum truck, construction, agriculture and D industry. Can be used to handle crushed rock, sand, pea gravel, dry cement, fertilizer and grains. Construction is Black SBR Rubber with a PVC helix support. Smooth inside bore for great flow characteristics. Extremely abrasion-resistant.Vacuum rating is between 25 and 27 inches depending on size. Available up to 12” I.D. Note: Use of 12” of banding coil at the fitting will reduce flexing which is a common cause of hose failure at the connection. PSI * Std. Wt./Lbs. Per Foot Part No. I.D. O.D. @ 72° F. Pkg. Per Ft. RETAIL KA 180AR-1-1/4 1-1/4" 1.57” 45 100’ .30 $ 4.11 KA 180AR-1-1/2 1-1/2" 1.82” 45 100’ .37 4.45 KA 180AR-2 2" 2.35” 40 100’ .50 7.24 KA 180AR-2-1/2 2-1/2” 2.95” 35 100’ .88 9.18 KA 180AR-3 3" 3.50” 35 100’ 1.10 12.13 KA 180AR-4 4" 4.63” 30 100’ 1.77 19.97 KA 180AR-5 5" 5.76” 30 50’ 2.50 31.36 KA 180AR-6 * 6" 6.73” 30 50’ 3.08 38.59 KA 180AR-8 * 8" 9.04” 30 50’ 5.65 64.32 KA 180AR-10 *10” 11.18” 28 20’ 8.88 107.20

Ureflex™ Series Material Handling Hose

130 lbs. $ 12.33 200 lbs. 19.10 337 lbs. 34.30

100’ 100’ 60’

SS135-4 Recommended For: Low pressure mater ial transfer hose. Exclusively designed for discharge service of dry cement and other powder abrasive materials. Lightweight construction provides superior flexibility without sacrificing quality. Tube: Extruded static conductive 1/8” SBR. Reinforcement: Multiple plies of polyester yarn. Cover: SBR Premium Grade, Black. Part No. I.D. O.D.

TITAN SPECIFICATIONS

Rated Wt. Per I.D. O.D. W.P. Ft. (In.) Plies (In.) (psi) (Lbs.) 4 2 4.50 65 1.48

Standard Length

TI SS135-4 4" 4.752” 100'

Std. Length DISCOUNT

Per Foot RETAIL

20%

$ 16.88

Hot Tar & Asphalt Hose

100’ Std. Pkg. Disc.

Per Foot RETAIL

20%

$ 41.14

TI SW387-3 3" 3.750”

Heavy-Duty, Polyurethane Lined Material Handling Hose features: Thick abrasion-resistant polyurethane liner designed for dry applications where severe abrasion is a factor • Static dissipative cover • Convoluted outer cover provides increase flexibility • Oil resistant polyurethane liner • Construction is PVC cover with polyurethane liner & rigid PVC helix • Hose remains flexible in sub-zero temperatures • Temperature Range: -40° F. to +150° F. PSI Vacuum Std. Wt./Lbs. Per Ft. @ 68° F. @ 68° F. Length Per Ft. RETAIL 50 Full 50’ .42 $ 4.05 50 Full 100’ .42 4.05 40 Full 50’ .59 6.59 40 Full 100’ .59 6.59 40 Full 100’ .80 8.51 40 Full 50’ 1.18 11.19 40 Full 100’ 1.18 11.19 Full Packages Only - No Cuts

- Use with Counter Clockwise Spiral Hose Clamps Please remember there are No Returns on customer specified cut lengths of hose.

(800) 228-9666

43 PSI 38 PSI 23 PSI

Part No. I.D. O.D.

• Agricultural Dry Fertilizers • Air Seeder Lines • Material Handling - Heavy Duty Abrasive • Rock, Gravel, Sand & Crushed Concrete Vacuuming

DULTMEIER SALES • OMAHA, NE

3" 3.50” 4" 4.57” 6” 6.69”

Per Foot RETAIL

SW387-3 is a high temperature suction & discharge hose. Premium Grade nitrile Tube provides heat resistance up to 350° F. SpeD cially designed for hot tar, asphalt, hot oil and other unrefined petroleum products. Temperature Range: -40° F. to 300˚F. Tube: Extruded heat resistant Nitrile tube. Cover: Ozone resistant Nitrile, Black. Reinforcement: Multiple plies of polyester yarn with dual wire helix. Rated to 150 PSI. Weight is 2.41 lb./Ft.

General Applications:

IND

KA 220RS-3 KA 220RS-4 KA 220RS-6

TITAN

* 6”, 8”, 10” & 12” Available in 100 ft. Package. * 20% Standard Package Discount

Part No. I.D. O.D. TF UF1-150X50 1-1/2” 1.85” TF UF1-150X100 1-1/2” 1.85” TF UF1-200X50 2” 2.40” TF UF1-200X100 2” 2.40” TF UF1-250X100 2-1/2” 3.07” TF UF1-300X50 3” 3.64” TF UF1-300X100 3” 3.64”

Maximum * Std. Pkg. Wt. per Part No. I.D. O.D. Work Pressure Lengths 100 ft.

Dry Cement Delivery Hose

Material Handling Hose

220RS Rubber Suction and Discharge Hose remains flexible at low temperatures. A great choice for vacuum pumping of septic tanks, car wash pits, and hog confinements. Ideal for rough, tough use around construction sites and industrial plants. Vacuum Rating to 29”. Temperature Range: -40° F. to 158° F.The SBR (buna) material makes this hose extremely lightweight, flexible and easy to couple.

* 20% Standard Package Discount

Per Foot RETAIL $ 8.31 14.41 19.30 24.79 41.00

* 6” & 8” Available in 100 ft. Package.

UF1™

•

Wet or Dry Material Hose TigerFlex Heavy-Duty,Wet or Dry Material Handling Hose features triple-resistant liner, static dissipative cover and “cold-flex” materials that remain flexible even in sub-zero temperatures.

Weather and UV resistant PVC cover with PVC helix allows use from -40° to +150° F. Abrasion-resistant polyurethane liner is ideal where severe abrasion is a factor. Static Dissipative cover helps prevent build up of static electricity for added safety. Sold by the foot, but quantity discounts available for full roll purchase. General Applications Include: Dry Fertilizers • Fly Ash • Hydro Excavation • Rock, sand, gravel or crushed concrete • Sewer truck booms • Slurry handling • Air seeder lines. Max. PSI Vacuum Wt./Lbs Min. * Per Ft. Part No. I.D. O.D. @ 68° F. @ 68° F. Per Ft. Req’d RETAIL TF AMPH400 4" 4.76” 35 28” 1.95 100 Ft. $ 23.72 TF AMPH500 5” 5.75” 35 28” 2.40 20 Ft. 37.12 TF AMPH600 6” 6.81” 30 28” 3.50 20 Ft. 45.56 TF AMPH800 8" 9.18” 30 28” 5.90 21’ or 60’ 77.72 * 20% Discount for 100’ Rolls of 4” or 20’ Rolls of 5” to 8”.

www.dultmeier.com

• DAVENPORT, IA

(800) 553-6975

E0822

Ducting/Blower • Discharge • Waste Hose Water & Waste Hose

Ducting/Blower Hose

Mill Hose, Single Jacket

General Purpose

Shown with Optional Fittings

100% EPDM with a Wire Helix

As Shown Below

Superior to 2-Ply cotton or Polyester

Heavy Duty Mill Hose is general purpose hose designed for clean water wash down or waste water discharge. All synthetic white cover, rubber lined. Totally immune to the effects of mildew, does not require drying. Lay flat design for easy roll up and storage. Can be used with aluminum, stainless and poly cam style fittings or pin lug and rock lug fittings as required (not included). Fitted assemblies in 50’ or 100’ lengths with ends are also available. Rated to 110 PSI or 220 PSI as shown. Only available in standard lengths, no cut pieces.

Excellent Abrasion Resistance • Smooth Bore • Flexible • Weatherability • Rated to 220° F. • Economical For general ducting and blower applications. Use with lightweight abrasives such as sawdust, grass clippings, and street refuse. 100% EPDM rubber, metal wire helix, smooth bore, corrugated OD.Rated to 220° F. For heavier use applications see 630ED. Weight Per Foot Part No. I.D. O.D. Std.Pkg. Per Foot RETAIL KA 620WD-4 4" 4.39” 50' .73 lbs. $ 6.41 KA 620WD-5 5" 5.43” 50' .84 lbs. 8.11 KA 620WD-6 6" 6.36” 50' 1.04 lbs. 10.25 KA 620WD-8 8" 8.35” 50' 1.38 lbs. 13.40 KA 620WD-10 10" 10.45” 50' 2.40 lbs. 18.69 KA 620WD-12 12" 12.40” 25' 2.50 lbs. 21.84 20% Discount Allowed on Standard Packages.

Ducting/Blower Hose Heavy Duty Use • 100% EPDM with a Polyethylene Helix

For heavy duty ducting and blower applications: street refuse, grain dust, wood chips, hay and straw blowing, leaf and grass collection. 100% EPDM Rubber with polyethylene helix, smooth bore, thicker side wall for more abrasion resistance, corrugated OD. Temperature to 158° F.

Part No. I.D. O.D. Std.Pkg. KA 630ED-3 3" 3.43” 50' KA 630ED-4 4" 4.53” 50' KA 630ED-6 6" 6.56” 50' KA 630ED-8 8" 8.66” 50'

Weight Per Foot .60 lbs. .76 lbs. 1.00 lbs. 1.37 lbs.

Per Foot RETAIL $ 6.61 7.97 12.06 16.15

Working Part No. I.D. * Length PSI Wt. RETAIL SF 80-150-100 1-1/2" 100’ 110 22 lbs. $ 91.79 SF 80-150DJ-100 1-1/2” 100’ 220 33 lbs. 133.33 SF 80-200-100 2” 100’ 110 34 lbs. 106.53 SF 80-200DJ-100 2” 100’ 220 62 lbs. 169.85 SF 80-250-100 2-1/2” 100’ 110 44 lbs. 129.31 SF 80-250DJ-100 2-1/2” 100’ 220 72 lbs. 200.67 SF 80-300-100 3” 100’ 110 56 lbs. 168.51 * Bare Hose - No Ends.

Lay Flat Water Discharge Hose PVC Lay Flat Hose is designed for water discharge applications in agriculture, construction and industry. Standard duty (Blue) or Heavy Duty (Red). Resists kinking and twisting. 2-Spiral pile reinforcement. 3-1 Safety burst pressure vs. operating pressure. Rated to 130° F. on Blue and 150° F. on Red. Pressure ratings are based on 70° F. and will decrease with higher temperatures. Sold by the foot with discounts on standard packages.

Kuriyama Blower Ducting Hose

Part No. SF LD150 KA IS150 SF LD200 KA IS200 SF LD300 KA IS300 SF LD400 KA IS400 SF LD600 KA IS600

Thermo-Duct™ Hose is the ideal choice for demanding and difficult applications such as blower and ducting use. D

— 25’ Minimum Order — Maximum Vacuum Part No. I.D. PSI Rating TF TMOD200 2" 17 24 TF TMOD300 3” 14 24 TF TMOD400 4” 11 24 TF TMOD600 6” 9 9 TF TMOD800 8” 8 8 TF TMOD1000 10” 7 6 TF TMOD1200 12” 6 4

NOTE: See EZ-Seal™ Couplings at left for use on 1-1/2” to 4” Hose. Do Not Use Poly Cam Lever Fittings.

20% Discount Allowed on Standard Packages.

Features: Helical wire reinforced design • Superior chemical, moisture and weathering resistance • Thermoplastic/rubber construction • 30 Mil wall thickness provides excellent internal and external abrasion resistance • Rated from -60° to +275° F.

Std. * Per Ft. Pkg. RETAIL 25’ $ 4.05 25’ 5.92 25’ 7.57 25’ 9.05 25’ 11.46 25’ 14.41 25’ 17.55

Hose Working * STD. Per Foot I.D. Pressure Color PKG. RETAIL 1-1/2" 70 PSI Blue 300' $ 0.87 1-1/2” 200 PSI Red 300’ 1.42 2” 65 PSI Blue 300’ 1.14 2" 175 PSI Red 300' 1.96 3” 55 PSI Blue 300’ 1.62 3" 125 PSI Red 300' 2.63 4” 50 PSI Blue 300’ 1.69 4" 125 PSI Red 300’ 3.90 6” 40 PSI Blue 300’ 3.83 6" 100 PSI Red 300’ 7.97 *20% Discount for Standard Package

Lay Flat Discharge Hose Assemblies Designed for water discharge at pressures shown. Pre-assembled and ready-to-use. Standard with aluminum male x female lever couplings. Can be joined together for longer runs or attached directly to transfer pumps. Rated from 130° to 150° F., but pressure ratings decrease at higher than 70° F. (Custom made assemblies are available if needed).

* 20% Discount for 25’ Standard Package

EZ-Seal™ Leak Resistant Couplings Ideally Suited for Layflat Hose FEATURES:

Rubber Seals - Help prevent leakage • Interchangeability Part C & E conform to Mil Spec A-A-59326 • Versatile - Suitable for use with PVC & Rubber hoses.

Aluminum Part C with Brass Cams Aluminum Part E Female Coupler x Hose Shank Male Adapter x Hose Shank Part No. Size Wt./Lbs. RETAIL Part No. Size Wt./Lbs. RETAIL EV AL-CLF150 1-1/2” .77 $ 13.07 EV AL-ELF150 1-1/2” .44 $ 6.32 EV AL-CLF200 2” .98 16.35 EV AL-ELF200 2” .64 8.11 EV AL-CLF300 3” 1.98 27.07 EV AL-ELF300 3” 1.38 17.29 EV AL-CLF400 4” 2.87 40.47 EV AL-ELF400 4” 2.51 25.46 Note: To ensure proper sealing attach band clamps directly over rubber seals.

IND

DULTMEIER SALES • OMAHA, NE

(800) 228-9666

•

Working Part No. Size Pressure KA LF15X50L 1-1/2” x 50’ 70 KA LF2X50L 2” x 50’ 65 KA LF2X50 2" x 50’ 150 KA LF3X50L 3” x 50’ 55 KA LF3X50 3” x 50’ 150 KA LF4X50 4” x 50’ 50 KA LF6X50 6” x 50’ 40

Color Blue Blue

Red Blue Red Blue Blue

Wt. RETAIL 18 lbs. $ 49.85 20 lbs. 58.69 20 lbs. 97.15 21 lbs. 95.81 21 lbs. 148.41 27 lbs. 143.05 36 lbs. 237.18

Please remember there are No Returns on customer specified cut lengths of hose.

www.dultmeier.com

• DAVENPORT, IA

(800) 553-6975

E0311

Sewer Cleaning Hose • Hose Guards Piranha Sewer Hose

Cobra Sewer Cleaning Hoses Cobra Sewer Cleaning Hose is engineered to handle the toughest conditions found in the High Pressure Sewer Cleaning Industry. The ideal choice for municipality and industrial applications. Thermoplastic composition and unique bonded construction allows for a flexible, light-weight and kinkresistant hose.

Piranha Sewer Hoses are constructed to provide rugged and reliable service under the most severe conditions found in high pressure sewer cleaning.All hoses feature a yellow Olefin tube with single or double braid reinforcement. Urethane covers are color coded to WASTEC specifications and provide exceptional cut, abrasion and fungus resistance. Rated for -40° to 150° F. (*190° F. on some sizes). Available in a wide variety of lengths and styles to meet your needs. All assemblies are standard with Male NPT hose ends matched to the hose size shown. (Other lengths and hose ends are available on request).

Cobra Hoses feature a polyurethane, “Tuff-Skin” cover that provides maximum resistance to cutting and abrasion. All Cobra hoses are color coded to conform to industry standards for maximum operating pressures. For safety assurance, Cobra Sewer Hoses are factory tested and sold as assemblies only. Common sizes and lengths are shown, but hoses can be made to any length to meet your specific requirements. Standard with NPT solid male ends. Rated from -40° F. to +135° F.

SP Orange Hoses are rated to 2500 PSI. Single, high tensile braid reinforcement with orange cover. Available in 3/4”, 1” and 1-1/4” I.D. sizes. Part No.

Color

I.D.

O.D. Max.PSI Length

TF SP12-400 Orange 3/4” 1.180” 2500 TF SP12-500 Orange 3/4” 1.180” 2500 TF SP12-600 Orange 3/4” 1.180” 2500 TF SP16-400 Orange 1” 1.460” 2500 TF SP16-500 Orange 1” 1.460” 2500 TF SP16-600 Orange 1” 1.460” 2500 TF SP20-400 Orange 1-1/4” 1.800” 2500 TF SP20-500 Orange 1-1/4” 1.800” 2500 TF SP20-600 Orange 1-1/4” 1.800” 2500

Wt.

2500 PSI

RETAIL

400’ 114 lbs. $ 1479.36 500’ 142 lbs. 1851.88 600’ 170 lbs. 2219.04 400’ 162 lbs. 1650.88 500’ 202 lbs. 2060.92 600’ 242 lbs. 2477.66 400’ 238 lbs. 2768.44 500’ 297 lbs. 3458.54 600’ 356 lbs. 4155.34

Part No.

LLBU 1/2” & HPBU 3/4’ & 1” Blue Hoses are rated to 3000 PSI. Double, high tensile braid reinforcement with blue cover. Available in 1/2”, 3/4”, 1” I.D. sizes. * (Rated to 190° F. on 1/2”). Color

I.D.

O.D. Max.PSI Length

TF HP10-200 TF HP10-300 TF HP10-400 TF HP10-500 TF HP10-600 TF HP12-400 TF HP12-500 TF HP12-600 TF HP16-400 TF HP16-500 TF HP16-600

Blue 1/2” 0.83” 3000 * 200’ Blue 1/2” 0.83” 3000 * 300’ Blue 1/2” 0.83” 3000 * 400’ Blue 1/2” 0.83” 3000 * 500’ Blue 1/2” 0.83” 3000 * 600’ Blue 3/4” 1.180” 3000 400’ Blue 3/4” 1.180” 3000 500’ Blue 3/4” 1.180” 3000 600’ Blue 1” 1.480” 3000 400’ Blue 1” 1.480” 3000 500’ Blue 1” 1.480” 3000 600’

Wt.

32 lbs. 48 lbs. 65 lbs. 81 lbs. 97 lbs. 117 lbs. 146 lbs. 175 lbs. 165 lbs. 207 lbs. 248 lbs.

RETAIL

$ 456.94 686.08 915.22 1134.98 1340.00 1561.10 1949.70 2336.96 1873.32 2342.32 2713.50

Color

I.D.

O.D.

Max.PSI Length

TF LL4-100 TF LL4-200 TF LL4-300 TF LL6-100 TF LL6-200 TF LL6-300 TF LL8-300 TF LL8-400 TF LL8-500 TF LL8-600

Green 1/4” 0.830” 4000 * 100’ Green 1/4” 0.830” 4000 * 200’ Green 1/4” 0.830” 4000 * 300’ Green 3/8” 0.830” 4000 * 100’ Green 3/8” 0.830” 4000 * 200’ Green 3/8” 0.830” 4000 * 300’ Green 1/2” 0.830” 4000 * 300’ Green 1/2” 0.830” 4000 * 400’ Green 1/2” 0.830” 4000 * 500’ Green 1/2” 0.830” 4000 * 600’

Wt.

6 lbs. 12 lbs. 18 lbs. 11 lbs. 22 lbs. 33 lbs. 48 lbs. 65 lbs. 81 lbs. 97 lbs.

I.D.

O.D.

Max.PSI Length

Wt.

RETAIL

Please remember there are No Returns on customer specified cut lengths of hose.

IND

DULTMEIER SALES • OMAHA, NE

(800) 228-9666

$ 1475.34 1845.18 2202.96 3043.14

1.430” 1.430” 1.430” 1.430”

Part No.

Color

I.D.

O.D.

NP 4630-12-400 NP 4630-12-500 NP 4630-12-600 NP 4630-12-800

Blue 3/4” 1.170” 3000 400’ $ 1717.88 Blue 3/4” 1.170” 3000 500’ 2014.02 Blue 3/4” 1.170” 3000 600’ 2410.66 Blue 3/4” 1.170” 3000 800’ 3360.72

NP 4630-16-400 NP 4630-16-500 NP 4630-16-600 NP 4630-16-800

Blue 1” 1.470” 3000 400’ $ 2087.72 Blue 1” 1.470” 3000 500’ 2626.40 Blue 1” 1.470” 3000 600’ 3131.58 Blue 1” 1.470” 3000 800’ 4306.76

2500 400’ $ 1748.70 2500 500’ 2216.36 2500 600’ 2659.90 2500 800’ 3670.26

PSI

Length

PSI

Length

RETAIL

Color

I.D.

O.D.

Green Green Green Green

1/2” 1/2” 1/2” 1/2”

0.89” 4000 400’ $ 1468.64 0.89” 4000 500’ 1818.38 0.89” 4000 600’ 2189.56 0.89” 4000 800’ 3064.58

RETAIL

High Density, Polyethylene Hose Guards are perfect for protecting hoses from abrasion and wear. Can be used in a wide variety of applications. Added protection for any hose against premature wear on rough or sharp surfaces. Standard color is black, but safety yellow is also available. Match guard size to the outside diameter (O.D.) size of your hose. Sold in bulk rolls only, but can be easily cut to length as needed. Rated from -40° to +250° F.

LLRD Red Hoses are rated to 5000 PSI. Single Aramid braid reinforcement with red cover. Available in 1/2” I.D. size. * (Rated to 160° F. ).

Red 1/2” 0.800” 5000 * 400’ 53 lbs. $ 1549.04 Red 1/2” 0.800” 5000 * 500’ 66 lbs. 1924.24 Red 1/2” 0.800” 5000 * 600’ 79 lbs. 2204.30

RETAIL

1” 1” 1” 1”

400’ 500’ 600’ 800’

Spiral Hose Guards

Color

Length

Orange Orange Orange Orange

NP 4640-08-400 NP 4640-08-500 NP 4640-08-600 NP 4640-08-800

$ 136.35 226.46 317.58 185.93 309.54 456.94 821.42 1093.44 1365.46 1637.48

TF LL85-400 TF LL85-500 TF LL85-600

PSI

NP 4625-16-400 NP 4625-16-500 NP 4625-16-600 NP 4625-16-800

RETAIL

Part No.

O.D.

Orange 3/4” 1.140” 2500 Orange 3/4” 1.140” 2500 Orange 3/4” 1.140” 2500 Orange 3/4” 1.140” 2500

LLGR Green Hoses are rated to 4000 PSI. Double, high tensile braid reinforcement with green cover. Available in 1/4”, 3/8” and 1/2” I.D. sizes. * (Rated to 190° F.). Color

I.D.

NP 4625-12-400 NP 4625-12-500 NP 4625-12-600 NP 4625-12-800

Part No.

4000 PSI

3000 PSI

Part No.

•

Guard Hose Roll Part No. Size O.D. Size SH P050B 1/2” .55 to .78 165’ SH P058B 5/8” .75 to .95 165’ SH P075B 3/4” .86 to 1.18 165’ SH P100B 1” 1.18 to 1.49 165’ SH P125B 1-1/4” 1.375 to 1.75 165’ SH P150B 1-1/2” 1.75 to 2.38 66’ SH P200B 2” 2.25 to 2.75 66’ SH P250B 2-1/2” 2.5 to 3.25 66’ SH P300B 3” 3.14 to 3.85 66’ SH P400B 4” 3.75 to 4.50 39’

www.dultmeier.com

• DAVENPORT, IA

(800) 553-6975

RETAIL $ 185.93 219.76 234.50 298.82 412.72 231.82 312.22 407.36 509.20 415.40

E0858

Sewer & Water Jetting Hose • Control Valves

JETEXTREME™ Hot Water Jetter Hoses JetXtreme Jetter Hoses for hot or cold water applications. Ideal for truck, trailer or portable sewer/drain jetters. Smooth, polyurethane cover for superior abrasion resistance. High-tensile, double polyester braids for added reinforcement. Temperatures to 250° F.

Part No. Size Length FN 30171 1/4” 50’ FN 30172 1/4” 100’ FN 30173 1/4” 150’ FN 30174 1/4” 200’ FN 30122 3/8” 100’ FN 30123 3/8” 150’ FN 30124 3/8” 200’ FN 30202 1/2” 100’ FN 30203 1/2” 150’ FN 30204 1/2” 200’ FN 30206 1/2” 400’

An ideal choice for Sewer Cleaning & Water Applications. For small Jetter machines and trailer units. Smooth, black cover features “Tuff-Skin” polyurethane construction for added abrasion resistance and ease of use. For pressures to 4000 PSI. Standard with NPT solid male fittings on 1/8” and 1/4” sizes and MPT solid x swivel on 3/8” and 1/2” sizes. Other lengths are available to meet your requirements. Rated from -40° F. to +140° F.

Available in 1/4”, 3/8” and 1/2” sizes in a variety of lengths to meet your needs. Swivel x Solid ends. Color is Green on 3/8” and 1/2” and Blue on 1/4” hoses. Made In USA.

Max. Max. PSI Flow 3000 2.5 GPM 3000 2.5 GPM 3000 2.5 GPM 3000 2.5 GPM 4000 5 GPM 4000 5 GPM 4000 5 GPM 4000 8 GPM 4000 8 GPM 4000 8 GPM 4000 8 GPM

Color Blue Blue Blue Blue Green Green Green Green Green Green Green

RETAIL $ 45.83 84.42 123.28 159.13 168.51 235.84 314.90 241.20 322.94 534.66 829.46

Part No.

Color

NP STH1 NP STH2 NP STH11 NP STH9 NP STH4 NP STH6 NP STH7 NP STH8 NP STH12 NP STH14 NP STH15 NP STH16 NP STH18 NP STH19

Black 1/8” 4800 50’ 1.5 $ 47.03 Black 1/8” 4800 100’ 1.5 88.44 Black 1/8" 4800 150’ 1.5 75.04 Black 1/4” 4400 50’ 2.5 45.83 Black 1/4” 4400 75’ 2.5 71.69 Black 1/4” 4400 100’ 2.5 89.11 Black 1/4” 4400 150’ 2.5 130.65 Black 1/4” 4400 200’ 2.5 171.19 Black 3/8” 4000 50’ 5.0 82.41 Black 3/8” 4000 100’ 5.0 153.77 Black 3/8” 4000 150’ 5.0 251.92 Black 3/8” 4000 200’ 5.0 273.36 Black 3/8” 4000 300’ 5.0 402.00 Black 3/8” 4000 350’ 5.0 455.60

I.D.

PSI

Length

Max. GPM

RETAIL

Clockwise (CW) Banding Coils

Foot Control Valves

Provides smoother surface if needed for banding clamps behind coupling. PVC material. Package is 12” - enough for both ends of one hose assembly. Grey color. For clockwise helix on 390SD, KLSR, 180AR, 180BL, 10UCLRD and other CW hoses. BCCF Kuriyama counter clockwise banding coils available for 1-1/2” through 8”.

Foot Controlled Valves for sewer cleaning hoses. Allows operator to maneuver sewer nozzles & hose and operate pressure with foot. Inlet and outlet are positioned to help keep hoses out of the way. Pedal and valve are in a protective housing. Heavy gauge steel construction for durability and stability. Valve is easy to repair if needed. Inlet is 3/8" FPT. Outlet is 1/4" FPT. Temperatures to 320° F.

Water Jetting Hoses

Rated to 140° F.

Rated to 250° F. • 1/4”, 3/8” & 1/2”

Part No.

TF BCRT2 TF BCRT3 TF BCRT4 KA BCRT6 KA BCRT8

RETAIL

2” Clockwise Banding Coil................ $ 5.79 3” Clockwise Banding Coil................ 11.99 4” Clockwise Banding Coil................ 15.95 6” Clockwise Banding Coil................ 37.79 8” Clockwise Banding Coil................ 77.72

We now have our Catalogs as well as Parts Schematics online!

DFV5010 STV4 Part No. Description

NP STV4 IP DFV5010 NP STV5 NP STV6

* Foot Control Valve, 8 GPM@3200 PSI.............. ** Foot Control Valve, 10 GPM@5000 PSI............ * Foot Control Valve, 12 GPM@5000 PSI............ * Foot Control Valve, 12 GPM@7300 PSI............

Maximum Temperature

RETAIL

320° F. $ 109.21 320° F.

163.15

320° F.

269.34

320° F.

546.72

www.dultmeier.com

* SUTTNER Brand. ** GENERAL Brand.

IND

DULTMEIER SALES • OMAHA, NE

(800) 228-9666

•

www.dultmeier.com

• DAVENPORT, IA

(800) 553-6975

E0848

High Pressure Hose & Assemblies

Pressure Washer Hose Assemblies

Smooth Cover 1 & 2 Wire Rubber Hoses

Wrapped Cover, 1 & 2 Wire Rubber Hoses

3000 to 5800 PSI

Smooth Cover Pressure Washer Hoses rated to 4000 or 6000 PSI and 250° F. Available in Blue, Black or Yellow “smooth” rubber construction. All assemblies are standard 3/8” I.D. with 3/8” MPT solid ends and one hose bend restrictor.

Wrapped Cover Pressure Washer Hoses are rated 3,000 to 10,000 PSI and 250° F. Available in Black, Gray or Yellow “wrapped” rubber construction for added abrasion resistance. All assemblies have MPT solid ends. One hose bend restrictor is also included.

Black Wrapped

Bend Restrictor

Grey Wrapped

Yellow Wrapped

Black Smooth Blue Smooth

3/8” BLACK HOSE ASSEMBLIES - WRAPPED COVER Part No. Length Max. PSI Wt. GA 6BW25 3/8" x 25', 1-Wire 4000 7 lbs. GA 6BW35 3/8” x 35’, 1-Wire 4000 9 lbs. GA 6BW50 3/8” x 50’, 1-Wire 4000 12 lbs. GA 6BW75 3/8” x 75’, 1-Wire 4000 18 lbs. GA 6BW100 3/8” x 100’, 1-Wire 4000 22 lbs. GA 6BW125 3/8” x 125’, 1-Wire 4000 28 lbs. GA 6BW150 3/8” x 150’, 1-Wire 4000 33 lbs. GA 6HR25-2 3/8” x 25’, 2-Wire 6000 9 lbs. GA 6HR50-2 3/8” x 50’, 2-Wire 6000 14 lbs. GA 6HR75-2 3/8” x 75’, 2-Wire 6000 22 lbs. GA 6HR100-2 3/8” x 100’, 2-Wire 6000 29 lbs. GA 6HR125-2 3/8” x 125’, 2-Wire 6000 36 lbs. GA 6HR150-2 3/8” x 150’, 2-Wire 6000 43 lbs.

Yellow Smooth

Bend Restrictor

3/8” BLACK HOSE ASSEMBLIES - SMOOTH COVER Part No. GA 6HR25 GA 6HR35 GA 6HR50 GA 6HR75 GA 6HR100 GA 6HR125 GA 6HR150

Length Max. PSI Wt. 3/8" x 25', 1-Wire 4000 7 lbs. 3/8” x 35’, 1-Wire 4000 9 lbs. 3/8” x 50’, 1-Wire 4000 12 lbs. 3/8” x 75’, 1-Wire 4000 18 lbs. 3/8” x 100’, 1-Wire 4000 22 lbs. 3/8” x 125’, 1-Wire 4000 28 lbs. 3/8” x 150’, 1-Wire 4000 33 lbs.

RETAIL $ 41.21 56.28 75.71 111.22 146.06 191.62 229.14

1/2” BLACK/ GREY HOSE ASSEMBLIES - WRAPPED COVER GA 8HR25 GA 8HR50 GA 8HR75 GA 8HR100 FN 41190 FN 41191

3/8” BLUE HOSE ASSEMBLIES - SMOOTH, NON-MARKING Part No. Length Max. PSI Wt. DU 6BL25 3/8" x 25', 1-Wire 4000 7 lbs. DU 6BL35 3/8” x 35’, 1-Wire 4000 9 lbs. DU 6BL50 3/8” x 50’, 1-Wire 4000 12 lbs. DU 6BL75 3/8” x 75’, 1-Wire 4000 18 lbs. DU 6BL100 3/8” x 100’, 1-Wire 4000 22 lbs. DU 6BL125 3/8” x 125’, 1-Wire 4000 28 lbs. DU 6BL150 3/8” x 150’, 1-Wire 4000 33 lbs. DU 6BL25-2 3/8” x 25’, 2-Wire 6000 10 lbs. DU 6BL50-2 3/8” x 50’, 2-Wire 6000 19 lbs. DU 6BL75-2 3/8” x 75’, 2-Wire 6000 29 lbs. DU 6BL100-2 3/8” x 100’, 2-Wire 6000 35 lbs. DU 6BL125-2 3/8” x 125’, 2-Wire 6000 47 lbs. DU 6BL150-2 3/8” x 150’, 2-Wire 6000 57 lbs.

RETAIL $ 45.23 60.30 81.07 117.25 156.78 202.34 242.54 60.97 114.57 168.84 221.10 301.50 325.62

Length Max. PSI 3/8" x 25', 1-Wire 4000 3/8” x 35’, 1-Wire 4000 3/8” x 50’, 1-Wire 4000 3/8” x 75’, 1-Wire 4000 3/8” x 100’, 1-Wire 4000 3/8” x 125’, 1-Wire 4000 3/8” x 150’, 1-Wire 4000

Wt. 7 lbs. 9 lbs. 12 lbs. 18 lbs. 22 lbs. 28 lbs. 33 lbs.

Part No. GA 6GE25 GA 6GE50 GA 6GE75 GA 6GE100 GA 6GE125 GA 6GE150 GA 6GE25-2 GA 6GE50-2 GA 6GE75-2 GA 6GE100-2 FN 41187 FN 41188 Part No. GA 6YW50 GA 6YW75 GA 6YW100

Fitted Hose, M22 x M22 Ends With 2 Bend Restrictors Part No. Size Color

UB 1500-25MM UB 1500-50MM

1/4” x 25’ 1/4” x 50’

1500-25MM Fittted Hose Assembly with M22 Ends

PSI

Length Max. PSI 3/8” x 50’, 1-Wire 4000 3/8” x 75’, 1-Wire 4000 3/8” x 100’, 1-Wire 4000

Wt. 18 lbs. 23 lbs. 33 lbs.

RETAIL $ 47.57 86.43 125.29 164.82 213.06 253.26 52.93 107.20 155.44 205.02 106.53 192.63

$ 83.08 149.75 163.15

Part No. GA 5RM-25 GA 5RM-50 GA 5RM-75 GA 5RM-100

RETAIL

(800) 228-9666

Black, “Wrapped Cover” Hoses that feature an additional “Special Polyethylene Coating” for maximum wear and abrasion resistance. Coating is impregnated into the outer cover for maximum life under the most extreme use. 3/8” I.D. with 3/8” MPT solid fitting on each end and one hose bend restrictor. Rated to 6000 PSI and 250° F. HIGH ABRASION-RESISTANT

Black 3100 $ 25.53 Black 3100 45.83

DULTMEIER SALES • OMAHA, NE

Wt. 7 lbs. 12 lbs. 18 lbs. 22 lbs. 28 lbs. 33 lbs. 9 lbs. 14 lbs. 22 lbs. 29 lbs. 22 lbs. 44 lbs.

- 2-Wire Wrapped -

— Fiber Braid —

The most flexible pressure wash hoses in the industry. Revolutionary, patented cold water pressure washer hoses feature superior resistance to kinking and abrasion. Lightweight and easy-to-handle, but with heavy duty performance and long wear life. Flexibility of more like an extension cord than a hose.

Length Max. PSI 3/8" x 25', 1-Wire 4000 3/8” x 50’, 1-Wire 4000 3/8” x 75’, 1-Wire 4000 3/8” x 100’, 1-Wire 4000 3/8” x 125’, 1-Wire 4000 3/8” x 150’, 1-Wire 4000 3/8” x 25’, 2-Wire 6000 3/8” x 50’, 2-Wire 6000 3/8” x 75’, 2-Wire 6000 3/8” x 100’, 2-Wire 6000 3/8” x 50’, 2-Wire 10,000 3/8” x 100’, 2-Wire 10,000

High Abrasion Resistant Rubber Wash Hoses

1500-25BL Blue Hose Assembly

$ 61.98 100.50 151.42 202.34 121.27 225.12

3/8” YELLOW HOSE ASSEMBLIES - WRAPPED, NON-MARKING

— Other Sizes Made to Order —

High Pressure Hoses

8 lbs. 14 lbs. 21 lbs. 22 lbs. 23 lbs. 47 lbs.

* 1/2” MPT Ends.

RETAIL $ 53.60 70.35 97.15 142.04 184.92 210.38 251.92

UberFlex™

* 1/2” x 25’, 1-Wire 3000 * 1/2” x 50’, 1-Wire 3000 * 1/2” x 75’, 1-Wire 3000 * 1/2” x 100’, 1-Wire 3000 * 1/2” x 50’, 2-Wire 10,000 * 1/2” x 100’, 2-Wire 10,000

3/8” GREY HOSE ASSEMBLIES - WRAPPED, NON-MARKING

3/8” YELLOW HOSE ASSEMBLIES - SMOOTH, NON-MARKING Part No. GA 6YE25 GA 6YE35 GA 6YE50 GA 6YE75 GA 6YE100 GA 6YE125 GA 6YE150

RETAIL $ 41.21 53.60 74.37 107.87 139.36 174.20 218.42 53.60 99.16 143.38 194.30 235.84 280.06

Length Max. PSI 3/8” x 25’, 2-Wire 6000 3/8” x 50’, 2-Wire 6000 3/8” x 75’, 2-Wire 6000 3/8” x 100’, 2-Wire 6000

Wt. 8 lbs. 14 lbs. 22 lbs. 29 lbs.

RETAIL $ 62.31 120.60 172.86 233.16

Please remember there are No Returns on customer specified cut lengths of hose. •

www.dultmeier.com

• DAVENPORT, IA

(800) 553-6975

E0799

High Pressure Wash Hose

Bulk Wash Hose

Bulk Wash Hose Wrapped Cover

Smooth Cover

Blue • Black • Yellow

Ideal for use on hot and cold water high pressure cleaning equipment where heavy duty service is required. Note: Not recommended for steam service.

Wrapped Cover Hose offers superior wear resistance to smooth rubber hose. Great choice for hot or cold water cleaning applications. Oil resistant tube and cover. One or two wire construction in 1/4”, 3/8” and 1/2” I.D. Can be crimped on site with permanent or reusable fittings matched to hose O.D. Quantity discount for full reel purchases. Rated to 250° F.

Temperature Range: From -40° to + 250° F. Cover: Specially designed to handle high pressure water service. (Blue is “Non-Marking” design). D

1SN (1 Wire) and 2SN (2 Wire) Series hose feature a standard “wrapped” cover for added performance and wear life compared to smooth cover hose.

NOTE: CUT LENGTHS SOLD IN 5’ INCREMENTS ONLY

Max. * Std * PerFoot

Part No.

I.D.

O.D.

PSI

Pkg.

RETAIL

GA PC-1/4 GA 6BL-1/4 GA PC5-1/4 GA PC-3/8 GA PC4-3/8 GA 8BL-3/8 GA PC-1/2

1/4” 1/4” 1/4” 3/8” 3/8” 3/8” 1/2”

0.53" 0.53” 0.59" 0.68" 0.74" 0.68” 0.80"

3500 3500 6000 3000 5000 4000 2500

300' 300’ 300' 300' 300' 300’ 300'

$ 1.61 1.34 3.10 1.84 3.63 1.47 2.96

Black, 1-Wire Blue, 1-Wire Black, 2-Wire Black, 1-Wire Black, 2-Wire Blue, 1-Wire Black, 1-Wire

1SN & 2SN

Note: Can be used with the reusable fittings on following pages. Note: Reels are multiple pieces with 50’ minimum.

5RM (2 Wire) Series hose features a standard “wrapped” cover but with the addition of a “polyethylene coating” that is impregnated into the cover. This gives maximum wear and abrasion resistance compared to any other wrapped or smooth cover rubber hoses.

T146 Hot Water Washdown Hose 1,000 PSI An ideal choice for plant wash down. Rated to 1000 PSI constant pressure. I.D. Maximum temperatures to 200° F. Cover is Yellow SBR/ D NBR blend that is abrasion, ozone, hydrocarbon and fire resistant - pin pricked. High tensile braided steel wire reinforcement. Tube is black extruded SBR/NBR blend - oil mist resistant. T146 specifications. Note: We can supply 3/4” and 1”, 50ft. and 100ft. coupled hose assemblies with GLX hydraulic fittings. If field assembled, you must use GLX or Bandit clamp connections. Do Not Use worm drive clamps. Wt. Per Pkg. 22 lbs. 44 lbs. 29 lbs. 58 lbs. 54 lbs. 108 lbs. 74 lbs. 148 lbs.

NOTE: CUT LENGTHS SOLD IN 5’ INCREMENTS ONLY

* 10% Discount if ordered in Standard Pack Reels. Reel Lengths are Approximate and May Vary. Non Continuous Lengths, May be Up to 3 lengths Per Reel with No Size Less than 50 Ft.

Std. Part No. I.D. O.D. Pkg. TF T136A7-075X50 3/4" 1.10” 50 TF T136A7 3/4” 1.10” 100 TF T136A10-100X50 1” 1.34” 50 TF T136A10 1" 1.34” 100 TF T136AK150 1-1/2" 1.93” 50 TF T136AK-150X100 1-1/2” 1.93” 100 TF T136AK200 2" 2.48” 50 TF T136AK-200X100 2” 2.48” 100

5RM

Per Foot RETAIL $ 3.23 3.23 3.63 3.63 6.46 6.46 9.98 9.98

Max. * Std. * Per Foot Part No. I.D. O.D. PSI Pkg. RETAIL. GA 1SN-1/4 Black Wrapped, 1-Wire......... 1/4” .48” 3000 600’ $ 1.74 GA 1SN-3/8 Black Wrapped, 1-Wire......... 3/8” .65” 4000 300’ 1.61 GA 2SN-3/8 Black Wrapped, 2-Wire......... 3/8” .70” 6000 300’ 2.14 GA 2SN-1/2 Black Wrapped, 2-Wire......... 1/2” .84” 4000 250’ 2.22 GA 5RM-3/8 Black Wrapped with Poly, 2-Wire 3/8” .72” 5500 400’ 2.55 GA 5RM-1/2 Black Wrapped with Poly, 2-Wire 1/2” .84” 4300 250’ 3.48 * 10% Discount if ordered in Standard Pack Reels. Reel Lengths are Approximate and May Vary. Non Continuous Lengths, May be Up to 3 lengths Per Reel with No Length Less than 50 Ft.

Hurricane Pressure Washer Hose Wrapped Cover - 1 Wire

Bulk Pressure Washer Hose from Parker. Ideal for use with hot or cold water pressure washers in plant wash down or car/truck wash applications. Made in the USA. Single wire, wrapped cover hose rated to 3,000 PSI. Available with either standard black or non-marking blue covers. Tube and cover are Neoprene construction. Temperature ratings from -40° to +250° F. Can be coupled with reusable couplings and or crimp style fittings. (Note: Not intended for carpet cleaning applications!)

Standard Package Only - All Sizes - No Cuts. D

High Pressure

Thermoplastic Hose (SAE100R7)

Ideal for Hydraulic Applications Thermoplastic Hose provides low temperature flexibility and high temperature resistance. Constructed of a seamless urethane tube with a single ply of interwoven polyester fibers for strength and a special black urethane cover for resistance to high temperature, aging and weathering.Temperature range of -65˚ F. to 160˚ F. For use with permanent pressed on style couplings. Part No.

Hose Hose I.D. O.D.

GA GT7-1/4 1/4" 0.51” GA GT7-3/8 3/8" 0.66”

IND

Max. Std. * Per Foot Part No. I.D. O.D. PSI Pkg. RETAIL PA 7258-1/4 Black Hose, Bulk 1/4” .500” 3000 500’ $ 2.43 PA 7258-1/4B Blue Hose, Bulk 1/4” .500” 3000 500’ 2.56 PA 7258-3/8 Black Hose, Bulk 3/8” .625” 3000 500’ 2.63 PA 7258-3/8B Blue Hose, Bulk 3/8” .625” 3000 500’ 2.83 * 10% Discount if ordered in Standard Pack Reels. Reel Lengths are Approximate and May Vary. Non Continuous Lengths, May be Up to 3 lengths Per Reel with No Size Less than 50 Ft.

Working Std. Pkg. Std. Pkg. Weight Per Foot Pressure Length Discount Per 100' RETAIL

2750 PSI 2250 PSI

250' 250'

10% 10%

6 lbs. 9 lbs.

$ 0.87 1.23

Please remember there are No Returns on customer specified cut lengths of hose.

DULTMEIER SALES • OMAHA, NE

(800) 228-9666

•

www.dultmeier.com

• DAVENPORT, IA

(800) 553-6975

E0490

Vacuum Hose Crush-Proof Vacuum Hose (Round Ribs)

Heavy Duty Vacuum Hose (Flat Ribs) Supreme Heavy-Duty Hoses feature Smooth, Flat Ribs for increased wear life and less chance of hang-ups or catching. Ideal for car/truck wash, auto detailing and carpet cleaning. Made in the USA.

CP Series Round Rib Hoses are the most flexible hoses in the car wash industry. Features: UV protection • Crush proof design • Smooth bore • Durable • Proprietary Polyolefin Copolymer formulation • Round outer rib design • Rated from -40° F. to +160° F. • Wide color options • 15’ and 25’ Lengths without cuffs • Made in USA.

Features: Lightweight interlocking design • Exceptional wear life • Unique liner provides increased protection from heat and chemicals • UV protection • Crush resistance • Flexible and durable • Smooth internal bore • Rated from -40° F. to +180° F. • Wide variety of colors • 15’ and 50’ lengths without cuffs. D

* Std. Part No. I.D. Length Pkg.

RETAIL

FX CP-1-1/4x15 1-1/4" 15' FX CP-1-1/2x15 1-1/2" 15' FX CP-1-1/2x15B 1-1/2" 15' FX CP-1-1/2x15BL 1-1/2" 15' FX CP-1-1/2x15O 1-1/2" 15' FX CP-1-1/2x15R 1-1/2” 15’ FX CP-1-1/2x15Y 1-1/2" 15' FX CP-2x15 2" 15' FX CP-2x15B 2" 15' FX CP-2x15BL 2" 15' FX CP-2x15O 2" 15' FX CP-2x15R 2” 15’ FX CP-2x15Y 2" 15' FX CP-1-1/4x50 1-1/4” 50' FX CP-1-1/2x50 1-1/2" 50' FX CP-1-1/2x50B 1-1/2” 50’ FX CP-1-1/2x50BL 1-1/2" 50' FX CP-1-1/2x50R 1-1/2” 50’ FX CP-1-1/2x50Y 1-1/2” 50’ FX CP-2x50 2” 50’ FX CP-2x50B 2” 50’ FX CP-2x50BL 2” 50’ FX CP-2x50R 2” 50’ FX CP-2x50Y 2” 50’

$ 15.54 18.83 18.83 18.83 18.83 19.03 19.03 26.93 26.93 26.93 26.93 26.93 26.93 49.85 61.64 61.64 61.64 61.64 61.64 87.77 87.77 87.77 87.77 87.77

Color 10 Grey/Black 6 Grey/Black

6 Black/Black 6 Blue/Black 6 Orange/Black 6 Red/Black 6 Yellow/Black 3 Grey/Black 3 Black/Black 3 Blue/Black 3 Orange/Black 3 Red/Black 3 Yellow/Black 3 Grey/Black 2 Grey/Black 2 Black/Black 2 Blue/Black 2 Red/Black 2 Yellow/Black - Grey/Black - Black/Black - Blue/Black - Red/Black - Yellow/Black

GV12X15

Flat Ribs Part No. * Std. Pkg. RETAIL FX GV12X15 1-1/2" x 15' Hose Less Cuffs, Grey 6 $ 21.57 FX GV12X15BL 1-1/2" x 15' Hose Less Cuffs, Blue 6 23.45 FX GV12X25 1-1/2" x 25' Hose Less Cuffs, Grey 4 35.78 FX GV12X25BL 1-1/2" x 25' Hose Less Cuffs, Blue 4 36.72 FX GV12X50 1-1/2" x 50' Hose Less Cuffs, Grey 2 73.03 FX GV12X50BL 1-1/2" x 50' Hose Less Cuffs, Blue 2 73.03 FX GV2X15 2" x 15' Hose Less Cuffs, Grey.... 3 29.61 FX GV2X15BL 2" x 15' Hose Less Cuffs, Blue..... 3 29.61 FX GV2X25 2" x 25' Hose Less Cuffs, Grey.... 2 48.51 FX GV2X25BL 2" x 25' Hose Less Cuffs, Blue..... 2 50.25 FX GV2X50 2" x 50' Hose Less Cuffs, Grey.... - 93.13 FX GV2X50O 2” x 50’ Hose Less Cuffs, Orange - 95.14 FX GV2X50BL 2" x 50' Hose Less Cuffs, Blue .... - 95.14 FX GV2-1/2X50 2-1/2” x 50’ Hose Less Cuffs, Grey - 119.26

* 5% Discount for Standard Package Purchase

Tapered Crush-Proof Vacuum Hose (Round Ribs)

CobraTapered Hoses are similar to the CP Series hose, but with the unique design of 1-1/2” at the working end and 2” at the vacuum. Made in the USA. Features: Non clogging design • Increased suction by 20% over regular hose • Flexible and durable • Crush proof • UV protection • Abrasion-resistant • Rated from -40° F. to +160° F. • Wide variety of colors • 15’ and 25’ lengths without cuffs.

* 5% Discount for Standard Package Purchase

Truck Mount Vacuum Hose (Flat Ribs) Heavy Duty Crush-Proof Hose

TP21G-BL

TP21G TP28G

Pro-Flex TM Truck Mount Vacuum Hoses are superior to other hoses in the market. Crush resistant, smooth bore, flexible, lightweight yet durable. Unique “Blue Liner” provides increase protection from chemicals and heat. Made in the USA.

1-1/2"

Features: Two part helically wound design • UV protection • Smooth interior • Crush resistant • Lightweight • Interlocking design • Poly welded cuffs are included • Rated from -40° F. to + 180° F. • Blue and gray shown, but other colors available • 25’ in 1-1/2” or 50’ and 100’ in 2” with cuffs.

TP21G-R TP21G-Y D

Part No.

Description

* Std. Pkg.

DULTMEIER SALES • OMAHA, NE

RETAIL

(800) 228-9666

TM1225BL

* Std. Part No. I.D. Length Color Pkg. RETAIL FX TM1225BL 1-1/2” 25’ Blue/Black 4 $ 39.80 FX TM250BL 2” 50’ Blue/Black - 97.15 FX TM250G 2” 50’ Grey/Black - 94.47 FX TM2100BL 2” 100’ Blue/Black - 195.31 FX TM2100G 2” 100’ Grey/Black - 191.29

FX TP21G 15' Tapered Vacuum Hose, Grey 6 $ 35.11 FX TP21G-B 15’ Tapered Vacuum Hose, Black 6 35.11 FX TP21G-BL 15’ Tapered Vacuum Hose, Blue 6 35.11 FX TP21G-R 15’ Tapered Vacuum Hose, Red 6 35.11 FX TP21G-Y 15’ Tapered Vacuum Hose, Yellow 6 35.11 FX TP28G 25’ Tapered Vacuum Hose, Grey 4 56.01 * 5% Discount for Standard Package Purchase

IND

* 5% Discount for Standard Package Purchase

Please remember there are No Returns on customer specified cut lengths of hose.

•

www.dultmeier.com

• DAVENPORT, IA

(800) 553-6975

E0804

Suction & Discharge Transfer Hose

Flex Joint Hoses

Suction Hose Liquid Suction Hose Assemblies. Highly flexible, crush and wear resistant. An ideal choice for wastewater transfer, dewatering, trash pumps, septic systems, portables cleanout and more.

Flexible, polyethylene construction is rated from -40° to +150° F. Will not crush or kink. Heavy-duty exposed ribs protect tube from wear and allow sliding over Flex Joint Hoses help to eliminate hoses breaking off at the truck. Can be rough surfaces. Leak-proof cuffs are factory installed and will not separate from used for suction or discharge. Clear PVC construction with blue helix spiral. the hose. 29 In. Hg vacuum rating and 7-15 PSI discharge pressure at 68° F. Rated from -40° to 150° F. Standard with female lever coupler on one end and (From the makers of TigerFlex). male adapter on the other end. Overall length is 3’ 6”. Available in 3” or 4” sizes. Part No. I.D. Length Wt./Lbs. RETAIL DU BW300X3 3" 3’ 7 $ 96.48 DU BW400X3 4” 3’ 11 126.63 D

Sewer Hose Guides

Max. PSI Part No. Size @ 68° F. Wt. RETAIL TF KBEE200X20 2” x 20’ 15 PSI 17 lbs. $ 117.92 TF KBEE200X25 2” x 25’ 15 PSI 21 lbs. 147.07 TF KBEE200X30 2” x 30’ 15 PSI 26 lbs. 176.55 TF KBEE200X40 2” x 40’ 15 PSI 34 lbs. 221.10 TF KBEE200X50 2” x 50’ 15 PSI 43 lbs. 273.36 TF KBEE200X60 2” x 60’ 15 PSI 51 lbs. 330.98 TF KBEE300X20 3” x 20’ 7 PSI 32 lbs. 173.87 TF KBEE300X30 3” x 30’ 7 PSI 48 lbs. 288.10

Includes Nylon Rope

Sewer Hose Guides are perfect for protecting your sewer hoses from abrasion and wear. Available 3’ long in either 2”, 3” or 4” sizes. Sewer hoses slide freely inside these assemblies. 20’ rope is also included for easy pull out when finished. Part No. I.D. x Length RETAIL DU TT2X3 2” x 3’ $ 29.48 DU TT3X3 3” x 3’ 37.12 DU TT4X3 4” x 3’ 45.56

Plastiflex ®

Hi-Vac Suction Hose

Sewer/Suction/Discharge Hose Assemblies These Hose Assemblies are designed for the most demanding applications Ideal for machine to machine liquid transfer, septic and portable rest room to truck transfer, excavation and dewatering as well as various construction uses. Rated for suction and discharge.

Standard Features Include: Abrasion-resistant outer shell • Kink-resistant construction • Yellow/black color • Ultraviolet-resistant base • Extremely flexible and corrosion-resistant • Fused, leak-proof cuffs • Rated for full vacuum without collapsing • Smooth interior wall for pump efficiency • Rated from -40° to +160° F. • Discharge ratings: , 2” - 14 PSI, 3” - 12 PSI and 4” - 10 PSI. Competitively priced but designed for long life use.

Part No. I.D. Length Wt. FX EB2025 2” 25’ 16 lbs. FX EB2050 2” 50’ 32 lbs. FX EB3025 3” 25’ 26 lbs. FX EB3050 3” 50’ 52 lbs. FX EB4025 4” 25’ 32 lbs. FX EB4050 4” 50’ 64 lbs.

Excellent abrasion resistance. Smooth interior increases pumping efficiencies. All sizes are rated to 29” of vacuum. Standard color is Black/ Yellow. End cuffs are included. Max. Part No. I.D. Size x Length PSI Wt. RETAIL FX HV41340 3” x 40’ 7 72 lbs. $ 291.05 DC A9152 3” Black Cuff as replacement ........ 9.18

RETAIL $ 76.38 153.77 137.69 277.38 197.32 376.54

Visit Our Web-Site: www. dultmeier.com

Grain Probe & Vacuum Hose

We Now Have Our Catalogs as Well as Parts Schematics Online!

1-1/4" • 1-1/2" • 2" I.D. — Supplied in 15', 25' & 50' Lengths CP Model

REGULAR DUTY — with Ribbed Exterior

The “Original” Hi-Vac® Suction Hose from Plastiflex is designed for the most demanding applications. Corrosion-resistant and crush-proof design springs back to original shape even if run over. Extremely flexible even at sub zero temperatures.

GV Model

HEAVY-DUTY with Smooth Flat Exterior

D D

Part No. FX CP-1-1/4x15 15' hose only FX CP-1-1/4x50 50' hose only FX CP-1-1/2x15 15' hose only FX CP-1-1/2x50 50' hose only FX CP-2x15 15' hose only FX CP-2x50 50' hose only FX GV12X15 15' hose only FX GV12X25 25' hose only FX GV12X50 50' hose only FX GV2X15 15' hose only FX GV2X25 25' hose only FX GV2X50 50' hose only

IND

I.D. Length Color RETAIL 1-1/4" 15' Grey $ 15.54 1-1/4" 50' Grey 49.85 1-1/2" 15' Grey 18.83 1-1/2" 50' Grey 61.64 2" 15' Grey 26.93 2" 50' Grey 87.77 1-1/2" 15' Grey/Black 21.57 1-1/2" 25 Grey/Black 35.78 1-1/2" 50' Grey/Black 73.03 2" 15' Grey/Black 29.61 2" 25' Grey/Black 48.51 2" 50' Grey/Black 93.13

DULTMEIER SALES • OMAHA, NE

(800) 228-9666

E-Mail us: dultmeier@dultmeier.com

Please remember there are No Returns on customer specified cut lengths of hose. •

www.dultmeier.com

• DAVENPORT, IA

(800) 553-6975

E1055

BAND-IT® Straps & Tools • Cable Ties BAND-IT®

C001 Band-It Tool

Valuestraps & Valuclips

A drop forged tool with tensioning capability of over 2,400 lbs. and a built-in cutter. New, improved features include: • A spring loaded gripper lever for improved band tensioning • A friction held cutoff lever with plastic grip for easier operation • Permanent lubrication on the tension screw to extend tool life and speed clamping • A zinc plated black chromate finish to provide superior corrosion D resistance • A spin handle retaining ring to keep parts intact.

BAND-IT’s austenitic, non-magnetic stainless steel strapping with Valuclips and the C075 Bantam Tool are used for securing signs, cable-bundling, pipe insulation and a variety of other lightweight applications. Use with the C001 or C075 banding tool. Note: Use with Valuclips. Not for hose coupling use. See adjacent page for this application.

Valustrap .015" Thick for Light Duty Applications

J001 Junior Adapter

Per Pkg. Part No. Width Thickness PKG. Wt. RETAIL

BD C133 BD C134 BD C135 BD C136

3/8" 1/2" 5/8" 3/4"

.015" .015" .015" .015"

2.2 lbs. $ 63.32 2.9 lbs. 70.35 3.6 lbs. 87.10 4.4 lbs. 102.51

100' 100' 100' 100'

Lightweight pocket size tool for use with the 3/8" Band-It Jr.® Preformed Clamps. Tensions and cuts the band.

Part No. RETAIL

BD C001 BD J001 BD J020

.020" Thick for Heavy Duty Applications D

.020" .020" .020"

Center Punch Tools

Ratchet action tensioning tools are for applying Center Punch and Center Punch Open-End clamps with a center punch lock.

3.8 lbs. $ 87.77 5.6 lbs. 102.51 5.7 lbs. 135.34

100' 100' 100'

“Band-It” TOOL................................. $ 210.38 “Band-It” JUNIOR ADAPTER........... 182.24 “Band-It” POK-IT TOOL.................... 184.92

BAND-IT®

Per Pkg. Part No. Width Thickness PKG. Wt. RETAIL

1/2" 5/8" 3/4"

J001 Junior Adapter is used with the C001 Tool to apply the Band-It “JR® 3/8” Preformed clamps.

J020 Pok-It Tool

Valustrap Plus

BD C181 BD C171 BD C161

No. T300

Heavy Duty

No. S38

Valuclips

Light Duty

304 Stainless For Use with Valustrap & Valustrap Plus Banding Material. Part No. Width Pkg. Wt.

BD C153 BD C154 BD C155 BD C156

3/8" 1/2" 5/8" 3/4"

100' 100' 100' 100'

.6 lbs. 1.1 lbs. 1.2 lbs. 2.1 lbs.

Per Pkg. RETAIL

$ 45.23 60.30 70.35 77.72

100 Ft. Rolls

In Color-Coded Plastic Totes Width Thickness

RETAIL

.025" $ 114.57 .030" 152.76 .030" 183.58 .030" 225.12

Bantam Tool D

Tensile Max. Ties Part No. Length Strength Diameter Per Bag

For use with Valustrap or Valustrap Plus banding material. Compact, lightweight, ratchet action tool with built-in cutter. For 3/8" thru 3/4" wide band. Unique 3-way handle.

Part No.

RETAIL $ 294.80 83.75

Hose & Cable Ties

201 Stainless

BD C203Y9 3/8" BD C204B9 1/2" BD C205G9 5/8" BD C206R9 3/4"

Part No. BD T300 Heavy Duty Tool for 3/8” & 5/8" Wide Clamps........... BD S38 Light Duty Tool for 3/8" & 5/8" Wide Clamps.............

Flexible Nylon Cable Ties are an ideal way to bundle, attach or secure hose, wire, cable and tubing in commercial, industrial and agricultural applications. High tensile strength and low insertion force design. Tapered tail is pulled through the head to securely lock in place. Working temperature from -40° to +185° F. UV rated, black nylon construction for indoor or outdoor use. UL listed, CSA certified. Manufactured in USA. Sold in bags of 50 or 100 ties as noted. Quantity Discounts are available for multiple bag purchases.

BAND-IT® Bands

Part No.

AL 07500C AL 11500C AL 14500C AL 141200C AL 241750L AL 361750L

RETAIL

BD C075 Bantam Tool $ 515.90

DULTMEIER SALES • OMAHA, NE

(800) 228-9666

•

www.dultmeier.com

7" 50 lb. 1.87” 100 * 11" 50 lb. 3.06” 100 * 14" 50 lb. 4.00” 100 * 14" 120 lb. 4.00” 100 ** 24" 175 lb. 7.18” 50 ** 36” 175 lb. 11.0” 50 ** * 10% Discount for 20 Bags Not Assorted. ** 10% Discount for 10 Bags Not Assorted.

• DAVENPORT, IA

(800) 553-6975

RETAIL

$ 3.97 6.66 7.77 15.34 19.30 22.58

E0316

BAND-IT • SmartSeal™ Clamps

SmartSeal™ Clamps

Center Punch Open-End Clamps

Helps to Stop Leakage From Thermal Changes

– For Wrap-Around Applications –

SmartSeal™ Clamps were designed in response to the leakage attributed to thermal changes and to meet today’s challenging lighter weight and space requirements.

Austenitic stainless open-end clamps are tensioned, then locked by striking tool punch with mallet or hammer. Requires T300 tool.

Band Max. Diameter Max. Diameter Total Pkg. Per Pkg. Part No. Width Once Around Twice Around Length Qty. RETAIL BD O8S 5/8" 4" 2" 21" 100 $ 274.70 BD O10S 5/8" 5" 2-1/2" 23" 50 251.92 BD O16S 5/8" 8" 4" 31" 50 355.10 BD O20S 5/8" 10" 5" 37" 25 249.24 BD O24S 5/8" 12" 6" 44" 25 324.28 BD O28S 5/8" 14" 7" 50" 25 368.50 — Sold In Full Packages Only —

Integrated Two-Piece Design: SmartSeal™ clamps are comprised of two main parts, the clamp assembly and the SmartLiner. • The SmartLiner is a spring liner made of high quality stainless steel integrated inside the clamp. • Designed to be smart, the thin gauge steel expands and contracts around hose with temperature changes. • Clamp rides on top of lubricated liner, distributing pressure more evenly around hose.

Center Punch Clamps

SmartSeal™ Clamps are engineered to last longer, and perform better than traditional clamps in the most demanding environments. D

Band-It® CP Series Center Punch Clamps are 201 stainless steel. CP clamps are locked with a standard conical punch, ensuring a strong, powerful lock for reliable and consistent clamping. Note: CP clamps should be installed with Band-It's T300 tool.

Clamp Band Pkg. Per Pkg. Part No. I.D. Width Qty. RETAIL BD CP8S 2" 5/8" 100 $ 249.24 BD CP10S 2-1/2" 5/8" 50 140.70 BD CP11S 2-3/4" 5/8" 50 148.74 BD CP12S 3" 5/8" 50 155.44 BD CP16S 4" 5/8" 25 97.82 BD CP20S 5" 5/8" 25 112.56 BD CP24S 6" 5/8" 25 127.30 BD CP28S 7" 5/8" 25 151.42

Features: • Spring compensation over 360 degrees. • Improved clamp roundness eliminates leak paths at housing juncture. • Grooved design creates higher pressure loading compared to conventional worm gear, increasing resistance against potential leaks. • Trough shape helps clamp “grip” by penetrating deeper into the hose wall resulting in a more effective cross sectional pressure footprint. • 150 in/lb. Maximum torque at screw

Sold in Full Pkgs. ONLY

BAND-IT ® Buckles Ear-Lokt Buckles in Type 201 stainless steel are designed to accommodate both single and double wrap clamps. The unique teeth and ears provide for maximum clamping strength.

Box of 100 Part No. Width RETAIL

The SmartSeal Channel Design

BD C253 3/8" $ 75.71 BD C254 1/2" 101.84 BD C255 5/8" 127.30 BD C256 3/4" 152.76

Sold in boxes of 100

High Pressure

BAND-IT Jr ® Preformed Clamps

Band Min. Max. Std Std. Pkg. Part No. Width Inches Inches Pkg. Discount RETAIL MP 0238 5/8” 1.64" 2.12” 10 10% $ 3.07 MP 0262 5/8” 1.90” 2.38” 10 10% 3.20 MP 0275 5/8” 2.03” 2.51” 10 10% 3.26 MP 0288 5/8” 2.16” 2.64” 10 10% 3.30 MP 0300 5/8” 2.29” 2.77” 10 10% 3.36 MP 0325 5/8” 2.53” 3.03” 10 10% 3.34 MP 0350 5/8” 2.74” 3.28” 10 10% 3.47 MP 0375 5/8” 2.92” 3.54” 10 10% 3.66 MP 0400 5/8" 3.12” 3.79” 10 10% 3.82 MP 0425 5/8” 3.31” 4.04” 10 10% 3.93 MP 0450 5/8” 3.48” 4.29” 10 10% 4.23 MP 0512 5/8” 4.06” 4.91” 10 10% 4.54 MP 0562 5/8” 4.55” 5.41” 10 10% 4.74 MP 0612 5/8” 5.03” 5.90” 10 10% 4.80

201

Stainless Band-It Jr.® Preformed Clamps Steel are vibration resistant and require no hammering or crimping. They are automatically locked under full tension in one simple lever movement. Std. Std. Pkg. Part No. Width Clamp I.D. Pkg. Discount RETAIL BD JS201 3/8" 13/16" 100 20% $ 2.14 BD JS243 3/8" 1" 100 20% 2.41 BD JS202 3/8" 1-3/8" 100 20% 2.41 BD JS205 5/8" 1-1/2" 100 20% 4.02 BD JS208 5/8" 2-1/4" 100 20% 4.86 BD JS210 3/4" 2-3/4" 50 20% 6.37 BD JS213 3/4" 4" 25 20% 8.44 BD JS215 3/4" 5" 25 20% 9.51

SHIPPING

IND

DULTMEIER SALES • OMAHA, NE

(800) 228-9666

•

www.dultmeier.com

• DAVENPORT, IA

(800) 553-6975

E0315

Hose Clamps

Stainless T-Bolt Clamps With Floating Bridge

All Stainless Steel:

Can be torqued 3-4 times that of a worm drive clamp. 150 in/lbs. maximum torque at screws. 3/4" Smooth stainless Steel band, bolt & housing. Note: “Ideal Brand”- Check hose O.D. and note Clamp I.D. range before ordering. Best clamp selection on hard wall hoses in larger sizes where bandit or fastlok banding is not available.

Band, Housing, & Drive Screw .50 in-lbs. Maximum Torque at Screw 350 Series: 5/16" wide Band - 1/4" Hex Screw 620 Series: 1/2" wide Band - 5/16" Hex Screw

Clamp Sold Only in Diameter Range Fits Band Boxes of 10 Part No. Min. to Max. Hose I.D. Width RETAIL MP 350-4 1/4” to 5/8” 1/8” to 3/8" 5/16” $ 11.19 MP 350-5 1/4” to 11/16” 1/8” to 3/8” 5/16” 11.19 MP 350-6 5/16” to 7/8” 1/4” to 7/16” 5/16” 11.32 MP 620-6 3/8” to 7/8” 5/16” to 3/8” 1/2” 12.53 MP 620-8 7/16” to 1” 5/16” to 1/2” 1/2” 12.53 MP 620-10 1/2” to 1-1/16” 3/8 to 3/4”” 1/2” 12.93 MP 620-12 1/2” to 1-1/4” 3/8” to 3/4” 1/2” 13.07 MP 620-16 11/16” to 1-1/2” 3/4” to 7/8” 1/2” 12.80 MP 620-20 3/4” to 1-3/4” 3/4” to 1-1/8” 1/2” 13.20 MP 620-28 1-1/4” to 2-1/4” 1-1/4” to 1-5/8" 1/2” 13.47 MP 620-36 1-3/4” to 2-3/4” 1-3/4” to 2" 1/2” 14.00 MP 620-56 3” to 4” 3" to 3-1/2” 1/2” 18.76 MP 620-72 3” to 5” 3” to 4-1/2” 1/2” 21.57 Quantity Discount: 10% on 20 boxes (200 Clamps assorted). * 25% on 100 Boxes (1000 Clamps) One Size. SOLD ONLY IN BOXES OF 10.

Size: Clamp I.D.

Std. Per Clamp Part No. Hose I.D. Range Pkg. RETAIL TK TC138 1-1/4" 1.375” to 1.50” 10 $ 6.66 TK TC162 1-1/4” 1.63” to 1.88” 10 6.66 TK TC181 1-1/2" 1.88” to 2.19” 10 6.97 TK TC193 1-1/2" 1.94” to 2.25” 10 6.97 TK TC218 2" 2.19” to 2.50” 10 7.24 TK TC231 2" 2.31” to 2.62” 10 7.37 TK TC250 2" 2.50” to 2.81” 10 7.37 TK TC287 2" 2.88” to 3.19” 10 7.37 TK TC331 3" 3.31” to 3.62” 10 7.50 TK TC343 3" 3.38” to 3.69” 10 7.37 TK TC350 3” 3.50” to 3.81” 10 8.51 TK TC425 4" 4.25” to 4.56” 10 7.77 TK TC438 4" 4.38” to 4.69” 10 7.77 TK TC450 4" 4.50” to 4.813” 10 9.31 TK TC625 6" 6.25” to 6.563” 10 9.98 TK TC650 6” 6.50” to 6.813” 10 10.05 TK TC850 8” 8.50” to 8.81” 10 10.65 Quantity Discount: 10% on Packages of 10. 20% on Packages of 100.

Zinc-Plated Steel Spiral Clamps

High Torque Stainless Clamps

Spiral Clamps for use on convoluted hose. Looking at the end of the hose: Use CW clamps if the hose spirals away from you in a right hand wrap. Use CCW clamps if the hose spirals away from you in a left hand wrap. Kuriyama hoses use CCW clamps. Pac Echo and Kanaflex use CW clamps. Goodyear uses both. Check your hose before ordering.

• Will handle 150 in. lbs. of torque at the screw • Good choice for dampening vibration • Wider Range than T-Bolt clamps • 410 Stainless screw with 5/16" Hex Head

CCW Spiral Clamps

• Utilizes 301 stainless steel 5/8" wide band

For Hose Part No. I.D. RETAIL KA SDBC-1-1/2 1-1/2" $ 3.16 KA SDBC-2 2” 6.19 KA SDBC-3 3" 6.90 KA SDBC-4 4" 5.99 KA SDBC-5 5" 5.52 KA SDBC-6 6" 9.58 KA SDBC-8 8" 10.12

• Stainless liner under band notches to protect soft surfaces • Large Heavy duty 301 stainless housing for maximum clamp efficiency Size: Clamp I.D. Hose Std. Std. Pkg. Part No. or Hose O.D. Size I.D. Pkg. Discount RETAIL MP 843-200 1.25" to 2.12" 1-1/4" - 1-1/2” 10 10% $ 5.00 MP 843-250 1.75" to 2.62" 2" 10 10% 5.13 MP 843-300 2.25" to 3.12" 2" 10 10% 5.27 MP 843-350 2.75" to 3.62" 3" 10 10% 5.40 MP 843-400 3.25" to 4.12" 3" 10 10% 5.53 MP 843-450 3.75" to 4.62" 4" 10 10% 5.53 MP 843-500 4.25" to 5.12" 4" 10 10% 5.82 MP 843-700 6.25" to 7.12" 6" 10 10% 6.83 Quantity Discount: 10% on Packages of 10. 20% on Packages of 100.

Counter Clockwise wound left hand spiral D

CW Spiral Clamps Use with helix hose with Clockwise spiral.

Duct Clamps for Blower/Duct Hose Steel, Worm Gear Clamps are designed for use with blower/ducting hose with clockwise spiral. For Hose Part No. I.D. RETAIL KA DC4 4" $ 3.66 KA DC5 5" 3.97 KA DC6 6" 4.45 KA DC8 8" 5.15 KA DC10 10" 6.37 KA DC12 12" 7.30

AF F

IND

Fits Hose with Outside Diameter

EV DB94 3” to 3-3/4” EV 0400DB 3-1/2" to 4" EV 0525DB 4-1/2" to 5" EV 0550DB 5" to 5-1/2" EV 0600DB 5-1/2” to 6” EV 0675DB 6-1/8” to 6-7/8” EV 0769DB 7” to 7-5/8” 15% on Packages of 10

RETAIL

(800) 228-9666

Part No. PowerLock Clamps RETAIL KA PS-2 For 101PS - 2.38” Hose $ 19.56 KA PS-3 For 101PS - 3.50” Hose 20.84 KA PS-4 For 101PS - 4.50” Hose 24.52

Bolt Type Hose Clamps

Part No.

Per Package of 100-Pieces $ 51.86 DULTMEIER SALES • OMAHA, NE

Clockwise wound right hand spiral

These reusable clamps provide an efficient means to secure fittings in heavy or light wall hose. Furnished in plated malleable iron with plated steel bolts. Note: Clamps work best in the middle of the range.

Ny-Glass Clamp SIZE “F” Ny-Glass SPEEDY HOSE CLAMP: For use on V1160-3/8" EVA Tubing. Clamp on with pliers for a perfect seal. Tough, durable and positive. Push sideways to unclamp. I.D. open .69" and I.D. closed .59". Sold only in packages of 100 pieces. Part No. NY-GLASS HOSE CLAMP

For Hose Part No. I.D. RETAIL KA SDBCR-1-1/2 1-1/2" $ 3.22 KA SDBCR-2 2” 3.75 KA PWL-2-1/2 2-1/2” 14.47 KA SDBCR-3 3" 4.68 KA SDBCR-4 4" 5.99 KA SDBCR-5 5" 7.10 KA SDBCR-6 6" 19.70 KA SC800 8" 31.89

•

www.dultmeier.com

• DAVENPORT, IA

(800) 553-6975

RETAIL

$ 9.05 10.92 15.28 15.28 17.82 19.56 22.51

E0314

100

HANNAY Hose Reels & Accessories

2 Year Warranty on all Hannay Reels

Hannay Hose Reels in Hand Crank or 12 Volt DC Rewind. Ideal for pressure washers, lawn care, tree spraying, etc. Spools turn on self-aligning bearings. Frames, drum and fasteners are fabricated with heavy gauge steel. Reels will handle most liquid products to temperatures of +225° F. and pressures to 3000 PSI. Painted enamel finish and AFLAS seals. Note: Also available with 304 stainless internals and special EPDM Seals for DEF. 1000 Series

1526-17-18

D D

Hand Crank Models: Crank is permanently attached on 1000 & 1500 series but can be removed on Model 4028-17-18.

Electric Models: Equipped with a 12-Volt DC motor with chain & sprocket drive. Hand cranks are not included on electric models. Swivel Repair Kits: Kits include all necessary O-rings, seals and washers for a complete swivel overhaul. High-quality replacement of original parts.

Part No. SE 5023 SE 5033 SE 5043 SE SS8KIT SE SS16KIT

E1526-17-18 SERIES 1000 1500 1800 4000

FPT INLET PORTS 1/2" FPT 1/2" FPT 1” FPT 1" FPT

Part No. Hose Size I.D. REWIND Ship Wt. RETAIL HN 1014-14-16 1/4" & 3/8" Hand Crank 27 lbs. $ 313.56 HN 1020-14-16 1/4" & 3/8" Hand Crank 31 lbs. 313.56 HN 1520-17-18 3/8" & 1/2" Hand Crank 50 lbs. 389.94 HN E1520-17-18 3/8" & 1/2" 12-Volt DC 68 lbs. 913.88 HN 1526-17-18 3/8" & 1/2" Hand Crank 50 lbs. 392.62 HN E1526-17-18 3/8" & 1/2" 12-Volt DC 68 lbs. 913.88 HN 1536-17-18 3/8" & 1/2" Hand Crank 70 lbs. 392.62 HN E1536-17-18 3/8" & 1/2" 12-Volt DC 95 lbs. 913.88 HN 1836-17-18 1/2" & 3/4" Hand Crank 70 lbs. 473.02 HN E1836-17-18 1/2" & 3/4" 12-Volt DC 95 lbs. 1029.12 HN 4028-17-18 1/2",3/4" & 1" Hand Crank 63 lbs. 549.40 HN E4028-17-18 1/2",3/4" & 1" 12-Volt DC 81 lbs. 1096.12 HN E4038-17-18 3/4" & 1" 12-Volt DC 130 lbs. 1096.12

OUTLET PORTS 3/8" FPT 1/2" FPT 3/4” FPT 1" FPT

REPLACEMENT PARTS RETAIL 1/2" Super Swivel........................................ $ 64.99 3/4” Super Swivel........................................ 90.45 1" Super Swivel........................................ 112.56 1/2" Super Swivel Repair Kit....................... 14.20 1" Super Swivel Repair Kit....................... 20.90

HOSE CAPACITIES IN FEET I.D: 3/8" 1/2" 3/4" 1" MODEL NO. O.D: 3/4" 7/8" 1-9/32" 1-9/16" HN 1014-14-16 100' — — — HN 1020-14-16 175' — — — HN E1520-17-18 275' 200' —- —- HN E1526-17-18 450' 325' —- —- HN E4028-17-18 —- 325' 135' 70' HN E4038-17-18 —- —- 200' 100' HN E1536-17-18 700’ 475’ †200’ —- HN E1836-17-18 —- 475’ 200’ —- * Length = Hand Crank (Longest). † 1/2” Inlet & Outlet.

MAX. DIMENSIONS * LONG DEEP HIGH 19" 14" 15-3/4" 25" 14" 15-3/4" 24-1/2" 19" 18" 30-1/2" 19" 19" 35" 19" 19" 47 " 19" 18-1/8" 40-1/2” 19” 18-1/8” 43-1/2” 19” 18-1/8”

Large Hose Reels Series 6000, 8000 & 9000 Larger Size Hannay Reels for large amounts of ¾” & 1” hose and 1-1/2”, 2” & 3” hose. Available in hand crank with pinion brake or 12 volt electric with comet brake (24VDC, 115VAC, Air & Hydraulic Drives available). 90° ball bearing swivel inlets included. 6000 Series to 1,000 PSI & 250° F., AFLAS seals; 8000 Series to 600 PSI & 175° F., Aflas seals; 9000 Series to 300 PSI & 225° F., Aflas seals; 6000 & 8000 Series include steel inlet swivel, riser outlet & drum and 9000 Series include ductile iron inlet swivel with aluminum riser outlet & drum (other materials available). 12 volt reels are supplied with switch & solenoid (shipped loose). Clutch/gear reduction units are included on 8000 & 9000 Series (required). Standard in “RightTop” configuration: Motor & inlet on right, top wind. Right Bottom, Left Top & Left Bottom configurations are also available.

8000 Series 6000 Series

HOSE CAPACITIES IN FEET I.D: 3/4" 1" 1-1/2" 2" 3” MAX. DIMENSIONS MODEL NO. O.D: 1-9/32" 1-9/16" 2-1/16" 2-9/16" 3-3/4” Inlet Outlet *LONG DEEP HIGH HN 6024-30-31 400' 200” — — —- 1” 1” 28-3/4" 28-3/4" 30" HN 6028-33-34 600' 350’ — — —- 1” 1” 32-3/4" 31-3/4" 33-3/4" HN 8238-39-40 —- —- 340’ 225’ —- 2” 2” 38-3/4" 39" 40" HN 9334-45-46 —- —- —- 200’ 115’ 3” 3” 36-1/4” 45” 48” * Length shown is longest of hand crank or 12V reel for each model.

Hose Ship Part No. Size I.D. Rewind Wt. HN 6024-30-31 3/4” & 1” Hand 163 lbs HN E6024-30-31 3/4” & 1” 12 Volt 203 lbs HN 6028-33-34 3/4” & 1” Hand * 179 lbs. HN E6028-33-34 3/4” & 1” 12 Volt * 219 lbs. HN 8238-39-40 1-1/2” & 2” Hand 420 lbs HN E8238-39-40 1-1/2” & 2” 12 Volt 460 lbs HN 9334-45-46 2”, 2-1/2” & 3” Hand 525 lbs. HN E9334-45-46 2”, 2-1/2” & 3” 12 Volt 565 lbs.

IND

DULTMEIER SALES • OMAHA, NE

RETAIL $ 879.04 1460.60 923.26 1578.52 1729.94 3344.64 2363.76 3667.58

(800) 228-9666

•

9000 Series

Other sizes & seals are available in each Series including stainless models; please call for options. Note: Use flexible connector between inlet pipe & inlet swivel joint (or hose). Hoses also available.

www.dultmeier.com

• DAVENPORT, IA

(800) 553-6975

E0319

HANNAY Spray Non-Corrosive Reels

2 Year Warranty on all Hannay Reels

101

Spray Non-Corrosive (SNC) Series Reels Hannay Spray Non-Corrosive (SNC) Series reels, constructed primarily of 304 grade stainless steel, are designed specifically for lawn care, agriculture, horticulture, pest control and other spray related industries. Competitively priced and comparable in weight to aluminum construction, the SNC Series provides a significant advantage in strength and protection in corrosive environments. These reels are designed to handle a variety of applications, including water, pesticides, fertilizer mixes and deicing liquids. Available in both crank and electric-powered rewind, other options include 4-way roller guides, as well as lightweight aluminum reel stacking kits.

STANDARD FEATURES: To Handle Single 3/8” thru 5/8” I.D. Hose • Lightweight, low profile reels designed for hose lengths up to 500 ft. • Mostly 304 SST construction, including discs, axle hub and welded frame. • Non SST components: Drum (Aluminum), swivel joint, bearings (Nickel Plated). • Manual (direct crank) reels include both pin lock & 3-position camlock drag brake. • Electric rewind reels (denoted by letter “E” at end of model) feature plated chain/sprocket drive with guard. • Standard Inlet: 90° full flow swivel, 1/2” FNPT thread Stand Outlet: 1/2” FNPT threads. • Standard pressure rated to 3,000 PSI. Higher pressures available, please call.

OPTIONS: • Aluminum stackable frame (for manual rewind reels). • Stainless steel rollers & roller mounting brackets. • Drum, swivel joint & bearings all upgradable to S.S. • Power rewind reels: Motor available in 12 or 24VDC, as well as 115VAC.

SNC-18 Manual Rewind Reel

SNC-18E Electric Rewind Reel (Hose Not Included)

SNC-18 Manual Rewind Reels (Shown with Optional Stacking Frame & Optional Rollers)

(Shown with Optional Hose Guide Roller Assembly)

HOSE CAPACITIES IN FEET I.D: 3/8" 1/2" 5/8" * REEL DIMENSIONS Part No. O.D: .65" .81" 1" A B E F

RETAIL

HN SNC-12 300' 200’ 125’ 17” 12” 16.5" 25.25" 15.5" $ 616.40 HN SNC-18

400'

300’

200’

23”

18”

16.5"

31.25"

21.5"

639.18

HN SNC-22 500' 400' 275’ 27” 22” 16.5" 35.25" 25.5" 665.98 HN SNC-12E 300' 200' 125’ 17” 12” 19" 22.5" 15.5" 1093.44 HN SNC-18E

400’

300’

200’ 23” 18” 19” 28.5” 21.5” 1106.84

HN SNC-22E 500’ 400’ 275’ 27” 22” 19” 32.5” 25.5” 1139.00 * X Indicates Mounting Holes.

IND

DULTMEIER SALES • OMAHA, NE

(800) 228-9666

•

www.dultmeier.com

• DAVENPORT, IA

(800) 553-6975

E1258

102

Hose Reels • Jumper Hoses • Coil Tubing Reelcraft Hose Reels Hand Crank / 12 Volt

Reelcraft Hand & Electric Rewind Hose Reels are designed for a wide range of applications such as lawn and turf, pressure washing, pest control, industrial and many more. Available in Hand Crank or with 12-Volt motors. Different styles and pressure ratings for most any hose storage requirement. All reels feature heavy-duty steel construction with powder-coated finish and lock pins to prevent de-spooling when not in use. Different frame styles can be used for fixed or mobile applications. Hoses Are Not Included. All reels are made in the USA.

H Series Hose Reels Economical, Medium Duty H Series Reels are economical, medium-duty that can be used for plant or field use. Rated to 1000 or 3000 PSI and 210° F. Steel construction and dual base assembly is standard. Manual hand crank. H16000M and H18000M are 19” High x 20” Deep x 18” Wide. H19000 is 19” High x 20” Deep x 18” Wide. H29000M is 19” High x 20” Deep x 24” Wide. Part No. RF H16000M RF H18000M RF H19000 RF H29000M

Hose Max. Capacity PSI 3/8” x 300’ 3000 1/2” x 200’ 3000 3/4” x 100’ 1000 3/4” x 150’ 3000

Style Hand Crank Hand Crank Hand Crank Hand Crank

Wt. 34 lbs. 34 lbs. 33 lbs. 34 lbs.

RETAIL $ 363.14 345.72 389.94 464.98

RF H18000M

CA (Hand Crank) & EA (12-Volt) Reels Designed for Rugged, Heavy-Duty Applications CA (Hand Crank) and EA (12-Volt) Reels are designed for rugged, heavy-duty applications. All bolted, unitized construction. Full flow swivel and heavy gauge steel frame. Available in hand crank or 12 -Volt motor design. Aflas seals. Rated to 250° F. and 1000 or 3000 PSI as noted. Part No. Style RF CA32106M Hand Crank RF CA32118M Hand Crank RF CA33118M Hand Crank RF EA32118L12D 12 Volt DC RF EA33118L12D 12 Volt DC

RF EA33118L12D

Hose Max. Dimensions Wt. Capacity PSI High Deep Wide Lbs. RETAIL 1/2” x 100’ 3000 20” 18” 20” 42 $ 379.22 1/2” x 325’ 3000 20” 18” 32” 52 395.30 3/4” x 175’ 3000 20” 18” 32” 52 509.20 1/2” x 325’ 1000 20” 18” 30” 68 845.54 3/4” x 175’ 1000 20” 18” 30” 75 947.38

Hose Reel Jumper Hoses Jumper Hoses are ideal for connecting pressure washers to hose reels. High pressure hoses are rated to 250° F. at the pressures shown below. All hoses are wire reinforced rubber construction and feature MPT solid by MPT swivel ends. Other lengths are available. Part No.

NP B3V00202 NP B3V00203 NP B3V00002 NP B3V00003 NP B3V58002 NP B3V58003

Size

Pressure

Color

RETAIL

1/4” X 2’ 1/4” X 3’ 3/8” X 2’ 3/8” X 3’ 3/8” X 2’ 3/8” X 3’

3000 PSI 3000 PSI 4000 PSI 4000 PSI 6000 PSI 6000 PSI

Blue Blue Black Black Black Black

$ 11.86 12.40 12.53 13.74 13.87 15.81

Stainless Steel Coil Tubing - 304SS & 316SS -

Stainless Steel Tubing for liquid or air supply lines. Ideal for use with low or high pressure solutions such as oils, chemicals, gases and solvents. Can also be used for low pressure chemical transfer, gas lines, air lines and more. Can be used with a wide variety of compression and push-lock fittings depending on application.

Standard .035 wall thickness in 304SS Welded or 316SS Seamless continuous coils. Rated to working pressures as shown. * (Shown and priced in 150’ coils, but 300’, 500’ and 1000’ coils are also available).

IND

O.D. Max. Part No. Type Size * Length MA TWC250-150 304SS Welded......... 1/4” 150’ MA TWC375-150 304SS Welded......... 3/8” 150’ MA TWC500-150 304SS Welded......... 1/2” 150’ MA TSC250-150 316SS Seamless..... 1/4” 150’ MA TSC375-150 316SS Seamless..... 3/8” 150’ MA TSC500-150 316SS Seamless..... 1/2” 150’ * 300’, 500’ and 1000’ Coils Available in Most Sizes.

DULTMEIER SALES • OMAHA, NE

(800) 228-9666

•

www.dultmeier.com

PSI 4100 CALL 2650 for 2100 CURRENT 5100 PRICING 3300 2600

• DAVENPORT, IA

(800) 553-6975

E1062

HANNAY Spring Rewind Hose Reels Series N500, N700, N800, 900

Spring Rewind Reels

TO HANDLE SINGLE HOSE SIZES 1/4” - 1-1/2” I.D.

Single Hose Spring Rewind Reels are available as standard reels (Series 900) and narrow frame reels (Series N500, N700 and N800). The N series reels have the same features as their conventional counterparts, except for a narrower frame and compact mounting base. SERIES N500 reels handle hose through 1/4" or 3/8" I.D. Inlet is 1/4" FPT 90 degree swivel joint. Outlet riser is 1/4" FPT. For chassis-grease hydraulics or air/water. SERIES N700 reels handle hose through 1/2" I.D. Inlet is 1/2" FPT 90 degree swivel joint. Outlet riser is 1/2" FPT. SERIES N800 reels handle hose from 1/2" through 1" I.D. Inlet is 1" FPT 90 degree swivel joint. Outlet riser is 1" FPT. SERIES 900 Reels handle hose from 1-1/4" through 1-1/2" I.D. Inlet is 1-1/2" FPT 90 degree swivel joint. Straight swivel joint available at no extra cost and must be specified. Outlet riser is 1-1/2" FPT. NOTE: Other sizes and/or threads can be furnished for outlet risers when specified. All these reels handle product temperatures from -20 to +225 degrees F. Series N700 operates at 3000 PSI, Series 800 operates at 1000 PSI, and Series 900 operates at 600 PSI. Other operational temperatures / pressures can be furnished at extra cost. The standard color is silver/gray enamel. OPTIONAL HOSE STOP: A hose stop should be used to prevent damage to rollers and nozzles and to permit adjustment of free hose length. HS-3 is 3" O.D. with a maxi-

mum 1-7/8" diameter hole size and HS-45 is 4-1/2" O.D. with a maximum 2-3/4" diameter hole size. Specify hose O.D. when ordering. Note: Also available with 304SS internals and special EPDM seals for DEF. Call for DEF Reel Pricing. HOSE ROLLER POSITIONS

POSITION SR Inlet on Right

POSITION VR Inlet on Right

POSITION TR Inlet on Left

103

NARROW FRAME Shown with optional hose & Stop (Optional TR Position)

SERIES N500 Shown with Optional Full Flow Swivel Joint

SERIES N700 D

STANDARD FRAME

SERIES N800 D

Shown with optional hose & Stop

On standard spring rewind reels, the hose pays out from the bottom of the reel and to the left when reel is viewed from the swivel joint side.Hose rollers are supplied with all models and you must specify the roller position when you order. If roller position is not specified,reels will be shipped with rollers in position SR.

SERIES 900

Hose Capacities & Reel Dimensions NOTE: Also available in Stainless Steel — Call for Pricing. SERIES N500

Part No. Wt. RETAIL Standard 1/4" Inlet/Outlet - 10,000 PSI HN N515-16-17C ........................... 86 lbs. $ 462.30 HN N515-19-20J............................. 98 lbs. 601.66 HN N515-23-24J ............................ 110 lbs. 671.34

SERIES N700

SERIES N500

SERIES N700, N800 & 900

Roller Assy. Supplied HOSE CAPACITY Approx. on OF REEL Model Reel Dimensions Weight Std. (Feet) Number (Inches) (Lbs.) Models I.D. 1/4" 3/8" HN A N/A B C D N/D E N/E F N/F G N/G H N/H NET SHIP O.D. 5/8" 3/4" 35 35 N515-16-17C - - - 10.5 - - - 18.5 - - - 17 - 9.12 51 86 50 50 N515-19-20J - - - 10.5 - - - 20.75 - - - 20 - 10.62 63 98 75 75 N515-23-24J - - - 15.5 - - - 23.75 - - - 24 - 12.62 75 110 I.D. 3/8" 1/2" O.D. 3/4" 7/8" 35 35 N715-23-24105 8.25 10 3 10.5 17.5 12 18.62 17.5 12.5 11.75 17.75 17 9.88 9.12 53 88 35 35 N716-16-17C 8.25 10 3 10.5 17.5 12 18.62 18.5 12.5 11.75 17.75 17 9.88 9.12 55 90 50 50 N716-19-20J 9.25 10 4 10.5 18 12 19.5 20.75 13.5 11.75 19.75 20 10.38 10.62 64 99 65 65 N716-23-24J 9.25 10 4 15.5 23.25 12 24.38 23.75 13.5 11.75 23.88 24 12.5 12.62 79 114 75 75 N716-25-26B 9.25 10 4 15.5 25 12 26.12 25.25 13.5 11.75 25.88 26 13.5 13.62 90 125 100 100 N718-25-26G 11.25 12 6 15.5 25 12 26.12 25.25 15.5 13.75 25.88 26 13.5 13.62 96 131 I.D. 3/4" 1" O.D. 19/32" 19/16" 25 15 N816-19-20J 9.25 10 50 25 N816-23-24J 9.25 10 60 35 N816-25-26B 9.25 10 70 50 N818-25-26B 11.25 12

4 10.5 18 12 19.5 20.75 14.75 13.25 19.75 20 10.38 10.62 63 4 10.5 23.25 12 24.38 23.75 14.75 13.25 23.88 24 12.5 12.62 81 4 10.5 25 12 26.12 25.25 14.75 13.25 25.88 26 13.5 13.62 96 6 10.5 25 12 26.12 25.25 16.75 15.25 25.88 26 13.5 13.62 102

I.D. 11/4" 11/2" O.D. 113/16" 21/16" 40 25 922-23-24B 15.25 - 10 10.5 23.25 - 24.5 - 50 40 920-25-26A 13.25 - 8 10.5 25 - 26.25 - 75 50 922-30-31A 15.25 - 10 10.5 28.5 - 29.75 - 75 50 922-30-3115.5 15.25 - 10 15.5 28.5 - 29.75 -

IND

DULTMEIER SALES • OMAHA, NE

24 - 22.75 - 24.75 - 24.75 -

23.88 - 13.5 25.88 - 13.5 31.38 - 17 31.38 - 17

(800) 228-9666

•

- - - -

98 116 131 137

N204 N204 N204 N204 N204 N206

N204 N204 N204 N206

104 139 127 162 156 191 156 191

www.dultmeier.com

N203 N203 N203

Part No. Wt. RETAIL Standard 1/2" Inlet/Outlet - 3,000 PSI HN N715-23-24105...................... 88 lbs. $ 641.86 HN N716-16-17C.......................... 90 lbs. 443.54 HN N716-19-20J .......................... 99 lbs. 644.54 HN N716-23-24J........................... 114 lbs. 722.26 HN N716-25-26B ......................... 125 lbs. 939.34 HN N718-25-26G.......................... †131 lbs. 958.10

SERIES N800

Part No. Wt. RETAIL Standard 1" Inlet/Outlet - 1,000 PSI HN N816-19-20J.......................... 98 lbs. $ 763.80 HN N816-23-24J.......................... 116 lbs. 793.28 HN N816-25-26B ........................ 131 lbs. 1021.08 HN N818-25-26BTR.................... * 137 lbs. 1072.00 HN N818-25-26B......................... ** 137 lbs. 1072.00

SERIES 900

Part No. Wt. RETAIL Standard 1-1/2" Inlet/Outlet - 600 PSI HN 920-23-24B.......................... 139 lbs. $ 1285.06 HN 920-25-26A.......................... 162 lbs. 1492.76 HN 922-30-31A ........................ ***191 lbs. 1819.72 HN 922-30-3115.5..................... ††191 lbs. 1902.80 * Inlet on Left Side & Top (TR). † VR Position †† 15.5” Drum ** Inlet Reversed - RIGHT SIDE. *** TR Position

R310 R308 R310 R310

• DAVENPORT, IA

2 Year Warranty on all Hannay Reels (800) 553-6975

E0320

Hose Reels & Accessories

104

Light Duty Air Hose Reels Light-Duty Steel Reels are an ideal choice for air supply lines in shops or garages. Hand crank design with balanced brass swivel. D

CU6050LN

Inlet and outlet are 3/8” FPT. Rated to 250 PSI. Can be mounted on floor or wall. Both reels are 11-1/2” high x 11” deep. Hose is not included.

CU6100LN

Hose Part No. Capacity RF CU6050LN 50’ of 3/8” I.D. RF CU6100LN 100’ of 3/8” I.D. High mount top wind position

Width 17-1/4” 21”

Wt. RETAIL 10 lbs. $ 115.24 13 lbs. 148.41

FH-3 Roller & Spool Assembly

As an accessory, specify FH-3 Assembly and give length of roller (Dimension Z, not to exceed 38") and distance between mounting holes (Dimension X). Also select top or bottom wind mounting bracket.

Spring Rewind Air Reel features a composite PVC outer case which is corrosion-resistant. Solid brass swivel and steel main shaft are standard features. Positive latching system design. Can be mounted in any position on floor, wall or ceiling. Lightweight yet durable. 3/8” x 50’ air hose is included and is rated to 230 PSI.

SGA3650OLP

Part No. Wt. RETAIL RF SGA3650OLP Spring Rewind Reel with Hose 23 lbs. $ 355.10

Hose & Cable Stops

Speeds handling and reduces hose wear. Buffed stainless steel rollers resist corrosion, pitting and abrasion. To Order: For factory installation, specify FH-3 Assembly. Also, select top or bottom wind mounting bracket.

Low mount bottom wind position

Spring Rewind Air Reel

Hose & Cable Stops are recommended for use with spring rewind reels and 4-way roller assemblies. Each stop is easily assembled with the fasteners provided, without any special tools. Two-piece molded plastic spheres, undrilled with bolts/ nuts (Can also be drilled to hole size you specify).

Maximum Part No. Dimensions Hole Size RETAIL HN HS3 3" O.D. 1.80” Dia. $ 24.79 HN HS45 4-1/2" O.D. 2.69” Dia. 36.52 HN HS35 * 3.5” O.D. 1.53” Dia. 22.51 * HS35 Only Comes Drilled - Specify Hose O.D.

Utility Hose Rollers

z x

Stainless Steel Rollers and cast alloy brackets for use on the reel, Dimensions RETAIL on cabinet door openings, truck FH-3 Roller & Spool Assembly.............. Call for Pricing platforms and similar locations FH-3 Roller & Spool Assembly, Factory Install. Call for Pricing where sharp edges may cut or damage * Top Wind Mounting Bracket................. $ 73.03 hose/cable. * Bottom Wind Mounting Bracket........... 55.28

Part No. HN FH3 HN - HN 9941.0023 HN 9941.0024 * Specify Model Number

Specifications: 1-1/2" diameter stainless steel roller, stainless rod, Delrin bearings, alloy brackets and required fasteners. To Order: Specify Assembly A, B or C and give distance between each pair of mounting holes (Dimensions X & Y) and length of each roller (Dimensions W & Z). W=vertical roller length, Z=horizontal roller length.

Roller Assemblies 4-Way Roller Assemblies are for use on the reel, on cabinet door openings and for similar locations where sharp metal edges may cut or damage the hose/cable. 4-way design protects hose even when payout or rewind is at an angle. Note: A hose stop should be used with 4-way rollers to prevent damage to rollers and nozzles. An extra bracket is required to mount the roller assemblies to a hose reel (sold separately). Part No. HN R203 HN R204 HN R205 HN R206 HN N203 HN N204 HN N205 HN N206 HN R306 HN R308 HN R310

IND

Overall Roller Size Opening RETAIL 8 x 5.5 2.5 x 2 $ 71.69 9 x 5.5 3.5 x 2 71.69 10 x 5.5 4.5 x 2 71.69 11 x 5.5 5.5 x 2 71.69 5.5 x 5.5 2.5 x 2 71.69 6.5 x 5.5 3.5 X 2 71.69 7.5 x 5.5 4.5 x 2 71.69 8.5 x 5.5 5.5 x 2 73.03 11.25 x 7 5.5 x 2.8 121.27 13.25 x 7 7.5 x 2.88 121.27 15.25 x 7 9.5 x 2.88 121.27

DULTMEIER SALES • OMAHA, NE

Also available factory installed on the reel.

N200 Series

Part No. Description RETAIL HN 9939.0060 Assembly "A" (Kit Only)....................................... $ 93.80 HN - Assembly "A" (Factory Installed)......................... Call for Pricing HN 9939.0061 Assembly "B" (Kit Only)....................................... 162.14 HN - Assembly "B" (Factory Installed, Bottom Wind)... Call for Pricing HN - Assembly "B" (Factory Installed, Top Wind)........ Call for Pricing HN 9939.1066 Assembly "C" (Kit Only)....................................... 182.24 HN - Assembly "C" (Factory Installed, Bottom Wind)... Call for Pricing HN - Assembly "C" (Factory Installed, Top Wind)........ Call for Pricing Note: Installed is with new reel purchase.

R200 Series

R300 Series

(800) 228-9666

•

www.dultmeier.com

• DAVENPORT, IA

(800) 553-6975

E0731

Hose Reels

105

Portable Garden Hose Reels High Quality, Industrial Grade

Portable Garden Hose Reels

High, Quality Industrial Grade Garden Hose Reels from Hannay Reels. Ideal for grounds maintenance, construction sites, restaurants, hotels and plant wash down. All steel construction. Swivels are plated brass.

Portable Garden and Landscape Reels from Reelcraft. An ideal choice for golf courses, athletic fields, parks, resorts, hotels and plant wash down. All reels feature abrasion-resistant powder coat finish, heavy steel construction, 1” square tube handles, 8-3/4” pneumatic tires, sealed ball bearings on axles and 10’ of inlet feeder hose. Rated to 1000 PSI and 250° F. Standard color is red.

Camlock break, one-piece foot and removable handle bar are standard features. Rated to temperatures to 250° F. and pressures to 1000 PSI if needed. GHAT1100 is designed for 5/8” garden hose and features 8” solid rubber tires. Includes 5’ GHT inlet hose.

GHAT1200 is designed for either 5/8” or 3/4” garden hose and features 10” pneumatic tires. Includes 5’ GHT inlet hose. AT1200 includes 1” FPT swivel inlet and features 10” pneumatic tires. Rated to 2,000 PSI. (No inlet hose included).

600965 will handle up to 200’ of 5/8” I.D. garden hose. Weight is 78 lbs. 600967 will handle up to 200’ of 5/8” or 100’ of 3/4” I.D. garden hose. Weight is 78 lbs. 600968 will handle up to 100’ of 1” I.D. garden hose. Weight is 94 lbs.

Part No. Capacity HN GHAT1100 125’ of 5/8” I.D. GHT Hose.......... HN GHAT1200 250’ of 5/8” or 150’ of 3/4” GHT Hose. HN AT1200 250’ of 5/8” or 150’ of 3/4” Hose .

Wt. 47 lbs. 86 lbs. 86 lbs.

Part No. Capacity Wt. RF 600965 200’ of 5/8” I.D. Hose............................. 78 lbs. RF 600967 200’ of 5/8” I.D. or 100’ of 3/4” I.D. Hose 78 lbs. RF 600968 100’ of 1” I.D. Hose................................ 94 lbs.

RETAIL $ 487.76 688.76 720.92

RETAIL $ 580.22 667.32 773.18

Enclosed Air Reel

Spring Rewind Garden Center Reels Reelcraft Spring Rewind Reels are designed to be centrally located for watering and washdown applications in garden centers, garages, shops, etc. Industrial grade steel construction features powder-coated, corrosionresistant red or white finish as shown. Guide arm is adjustable for a variety of positions. All models include bumper stop and hose. Hoses are standard with 3/4” Male garden hose fittings. Rated to 250 PSI and 150° F.

Standard Features: • Allows for 50’ of Capacity • Hose Inlet/Outlet is 3/8” • Working Pressure of 300 PSI • Advanced Auto Stop & Automatic Guide System • Hose Can Be Stopped at Any Point & a Controlled Return Allows the Hose to Safely Guide Back Into the Enclosed Housing • Compatible with Air or Water • Bracket Allows for 180° of Swivel • 3/8” x 50’ of Hose Included

Part No. Description RETAIL NS 1459NS 3/8” x 50’ Enclosed Hose Reel, Spring Return....... $ 152.43 D

Universal Hose Reel Bracket - Ceiling Mount

7850OLPSW57

83050OLP107

Part No. RQ 7850OLPSW57 RQ 83050OLP107 RQ GC7925OLP

Color Red White Red

Hose 1/2” x 50’ 5/8” x 50’ 3/4” x 25’

Wt. 51 lbs. 89 lbs. 53 lbs.

This Universal Ceiling Mount Hose Reel Bracket will adapt to virtually any hose reel on the market. The mount clamps in place - no drilling required. It will mount to most 6” - 8” wall or ceiling I-Beams. The unit includes a safety cable as well. Hose reel is not included.

RETAIL $ 548.06 848.22 674.02

- Hose Reel Not included Part No. Description RETAIL NS URM100 Universal Hose Reel Ceiling Mount........................ $ 196.65

DULTMEIER SALES • OMAHA, NE

(800) 228-9666

•

www.dultmeier.com

• DAVENPORT, IA

(800) 553-6975

E0318

Spring Rewind & Specialty Hose Reels

106

Spring Rewind Reel & Hose Units Hannay Spring Rewind Hose Reels feature narrow frame and compact mounting base. Heavy-duty spring provides self-contained rewind power. Ideal for air and water, lubrication, maintenance operations, service stations and many other industrial uses. 10 Gauge and 14 gauge steel construction with enamel finish. All reels come with hose type and length shown along with hose stop and hose roller assembly. Model SR roller position is standard but other positions are available.

AIR & WATER REELS - LOW PRESSURE

Part No. HN 47-24

Hose Description Size Length PSI Wt. RETAIL N716-19-20J Series Spring Rewind with single textile braid reinforced synthetic rubber hose, and HS-3 hose stop installed................................. 1/2" 50' 300 100 lbs. $ 711.54

AIR, WATER & LUBE OIL REELS - MEDIUM PRESSURE

Shown with Optional TR Position

N47-25

Roller Positions Available

Part No. HN 47-25 HN 47-26 HN 47-45 HN 47-46

Hose Description Size Length N716-19-20J Series Spring Rewind with SAE 100 R1 Type AT hose, and HS-3 hose stop installed..................................................................... 3/8" 50' N716-19-20J Series Spring Rewind with SAE 100 R1 Type AT hose, and HS-3 hose stop installed..................................................................... 1/2" 50' N716-25-26B Series Spring Rewind with SAE 100 R1 Type AT hose, and HS-3 hose stop installed *.................................................................. 3/8" 75' N716-25-26B Series Spring Rewind with SAE 100 R1 Type AT hose, and HS-3 hose stop installed *.................................................................. 1/2" 75'

PSI

Wt.

RETAIL

2250 99 lbs.

$ 743.70

2000 102 lbs.

787.92

2250 145 lbs.

1053.24

2000 150 lbs.

1104.16

AIR, WATER & LUBE OIL REELS - HIGH PRESSURE

Part No. HN 47-27 HN 47-28

Hose Description Size Length PSI Wt. RETAIL N716-19-20J H5M Series Spring Rewind with SAE 100 R16 Type AT hose, and HS-3 hose stop installed........................................................... 3/8" 50' 4000 102 lbs. $ 830.80 N716-19-20J H5M Series Spring Rewind with SAE 100 R16 Type AT hose, and HS-3 hose stop installed........................................................... 1/2" 50' 3500 105 lbs. 852.24

GREASE REELS

Part No. HN 45-11 HN 45-13

Hose Description Size Length PSI Wt. N515-19-20J H10M Series Spring Rewind with SAE 100 R2 Type AT hose, and HS-3 hose stop installed...................................................... 1/4" 50' 5000 98 lbs. N515-19-20J H8M Series Spring Rewind with SAE 100 R16 Type AT hose, and HS-3 hose stop installed...................................................... 3/8" 50' 4000 99 lbs.

RETAIL $ 824.10 864.30

* Not UPS shippable.

Stainless Steel Spring Rewind Reels

Power Cord Reels Spring Rewind Power Cord Reels have a compact design for critical space requirements. Corrosion-resistant, bakedon finish. Can be mounted to wall, ceiling or bench. Supplied with 4’ inlet cord, power cord, hose guide and cord stop.

Corrosion-Resistant, Stainless Spring Rewind Hose Reels from Reelcraft. Ideal for use in food processing, wash down, industrial use, off-shore and on board marine applications or anywhere harsh environments require stainless construction. Swivels with Viton® o-rings are standard. Rated to 500 PSI and 210° F. (Hoses are not included).

L4050-1633

Cord Part No. Length RF L4050-1633 50’ RF L4545-1233 45’ RF L4545-1233A 45’

Rating 13 Amp / 115 volt 15 Amp / 115 Volt 20 Amp / 125 Volt

Wt. 26 lbs. 28 lbs. 29 lbs.

RETAIL $ 481.06 529.30 558.78

7800OLS

Light Cord Reels Spring Rewind Light Cord Reels have a compact design for critical space requirements. Corrosion-resistant, baked-on finish. Can be mounted to wall, ceiling or bench. Supplied with 4’ inlet cord, power cord, hose guide and cord stop. Available with either incandescent or fluorescent lights. Rated for 125 volt, 60 hz, single phase power. U.L. listed. For indoor use only.

Hose Part No. Capacity RF 5600OLS 3/8” x 35’ RF 7800OLS 1/2” x 50’ RF 82000OLS 1/2” x 100’ RF D83000OLS 3/4” x 75’ RF D84000OLS 1” x 50’

Part No. RF L4035-1631 RF L4035-1622

IND

Cord Length 35’ 35’

DULTMEIER SALES • OMAHA, NE

RETAIL $ 770.50 1136.32 1876.00 2135.96 2201.62

From Reelcraft! Jetter Reels for the rigors of the sewer cleaning market. Frames are constructed of industrial grade, tubular steel with powder coated finish. Dual bearing design makes rewind smooth and even. Powder coated finish for maximum corrosion resistance.

Call Us for a Quote. Just Give Us the Pressure Requirements, Hose I.D., Size, Hose Capacity Needed and Drive Design and We Will Be Glad to Work You Up a Price!

Wt. RETAIL 23 lbs. $ 460.96 25 lbs. 510.54

(800) 228-9666

Wt. 22 lbs. 41 lbs. 81 lbs. 84 lbs. 92 lbs.

Built to Your Specifications!

L4035-1622

LIght Type Incandescent Fluorescent

Maximum Pressure 500 PSI 500 PSI 500 PSI 500 PSI 500 PSI

Jetter Reels

L4035-1631

•

www.dultmeier.com

• DAVENPORT, IA

(800) 553-6975

E0613

Spring Rewind Reels

107

Spring Rewind Reels Spring Rewind Hose Reels from REELCRAFT. Available in premium-duty and heavy-duty designs for ceiling, floor or wall mounting. Reels come standard with hose for air, water, oil or grease but are also available without hose. Reels with hose also include hose guide and stop. Steel construction with powder-coated finish. All reels are manufactured in the USA. 4000 / 5000 Series Premium-Duty Reels are designed with one pedestal foot for a wide range of applications where critical space requirements are required. Other hose lengths are available if needed. Water/Air Reels are rated to 150° F. Oil and grease reels are rated to 210° F.

Premium-Duty Reels

Max. Wt. Part No. Product Hose PSI Inlet Lbs. RETAIL RF 4435OLP Air/Water 1/4" x 35’ 300 3/8" 20 $ 302.84 RF 4400OLP Air/Water None 300 3/8” 17 239.86 RF 5450OLP Air/Water 1/4” x 50’ 300 3/8” 26 402.00 RF 5400OLP Air/Water None 300 3/8” 20 337.68 RF 4625OLP Air/Water 3/8” x 25’ 300 3/8” 22 321.60 RF 4600OLP Air/Water None 300 3/8” 17 223.78 RF 5650OLP Air/Water 3/8” x 50’ 300 3/8” 36 467.66 RF 5605OLP Air/Water None 300 3/8” 31 344.38 RF A5825OLP Air/Water 1/2” x 25’ 300 3/8” 29 373.86 RF A5800OLP Air/Water None 300 3/8” 22 325.62 RF A5850OLP Air/Water 1/2” x 50’ 300 3/8” 44 463.64 RF A5806OLP Air/Water None 300 3/8” 35 404.68 RF 5630OMP Oil 3/8” x 30’ 2250 3/8” RF 5600OMP Oil None 2250 3/8” RF 5430OHP Grease 1/4” x 30’ 5000 1/4” RF 5400OHP Grease None 5000 1/4”

30 23 30 23

D D

4625OLP

5400OLP

D D

A5850OLP

545.38 359.12 557.44 434.16

Heavy-Duty Reels 7000 & 80000 Series Heavy-Duty Reels are ideal for the most demanding applications. Base and arm are designed with structural forms and gussets to yield greater strength. 80000 Series can be truck mount. Air / Water reels are rated to 150° F. Oil and grease reels are rated to 210° F. Hoses are included. Part No. Product Hose RF 7650OLP Air/Water 3/8" x 50’ RF 7850OLP Air/Water 1/2” x 50’

7850OLP Single Base

82100OLP

Max. Wt. PSI Inlet Lbs. 300 1/2" 47 300 1/2” 51

RF 7850OMP Oil 1/2” x 50’ 2000 1/2” 57 RF 7650OHP Grease 3/8” x 50’ 4000 1/2” 60

RETAIL $ 515.90 600.32 698.14 751.74

RF 81100OLP RF 82100OLP RF 83050OLP RF D84050OLP

Double Base

Air/Water Air/Water Air/Water Air/Water

3/8” x 100’ 1/2” x 100’ 3/4” x 50’ 1” x 50’

300 300 300 250

1/2” 1/2” 3/4” 1”

92 101 88 103

824.10 845.54 816.06 1026.44

Heavy-Vibration Reels DP7000 Series features Dual Pedestals and are designed to handle heavy vibration. Ideal for truck mounted applications. (Meets or exceeds military vibration for truck transport test). Powder-coated finish and all steel construction produce a rugged corrosion-resistant reel. Air/Water reels are rated to 150° F. Oil and grease reels are rated to 210° F. Max. Wt. Part No. Product Hose PSI Inlet Lbs. RETAIL RF DP7850OLP Air/Water 1/2" x 50’ 300 1/2" 50 $ 616.40 RF DP7800OLP Air/Water None 300 1/2” 43 519.92 RF DP7850OMP Oil 1/2” x 50’ 2000 1/2” 57 817.40 RF DP7800OMP Oil None 2000 1/2” 43 617.74 RF DP7650OHP Grease 3/8” x 50’ 4000 1/2” 60 899.14 RF DP7600OHP Grease None 4000 1/2” 43 707.52

DP7850OLP Dual Base

Suffix Code Chart Reels are shipped in the TW position unless otherwise specified. 4000 and 5000 Series ordered in BW position available in constant tension only.

SW - WALL & FLOOR

IND

DULTMEIER SALES • OMAHA, NE

TW - CEILING & UNDERFLOOR

(800) 228-9666

•

www.dultmeier.com

BW - BOTTOM WIND

• DAVENPORT, IA

(800) 553-6975

E0925

Hose Reels

108

Remote Controlled Power Rewind Reels

Diesel Exhaust Fluid (DEF) Hose Reel Packages

To Handle Single 3/8” or 1/2” I.D. Hose Standard Features: • Heavy-Duty 12V DC 1/3 HP Electric Reel. • Bidirectional Remote Control (Power In, Power Out) with Over 2,000 Ft. Range. (Military Grade, Environmentally Sealed Electronics Including OverCurrent, Temperature & Under Voltage Protection). • Variable Speed Control Allows User to Choose Comfortable Unwind/Rewind Speed. • Robust Remote Control with Belt Clip is Weather & D Impact Resistant. • Remote is Rechargeable with Low Battery Light (Typical Time Between Charges is 3 to 4 Months). • All Rewind, Unwind, & Speed Control Functions are Controllable from Keyfob either Remote Control or Base station. • Optional Emergency Stop Control Button Allows Engine/Pump to be Turned Off Remotely. • Fully Adjustable Brake Prevents Hose Movement During Transit. • Standard Inlet is 90° Ball Bearing Swivel Joint with 1/2” Female NPT Threads; 1/2” FPT Outlet. • Pressures to 3,000 PSI. • Temperatures from +20° F. to +400° F.

Wt. Part No. Description Hose I.D. Capacity Lbs. HN RM-3006 Remote Control Hose Reel 3/8”-300’ 1/2”-150’ 138 HN RM-3006X Remote Control Hose Reel, No “Power Out”, Keyfob 3/8”-300’ 1/2”-150’ 138 CALL HN RM-3008 Remote Control Hose Reel 3/8”-500’ 1/2”-300’ 145 for HN RM-3008X Remote Control Hose Reel, PRICING No “Power Out”, Keyfob 3/8”-500’ 1/2”-300’ 145 HN RMS Optional Pump “Stop” Feature inside Remote.................. Dimensions: RM-3006: 26.75” x 16.5” x 28.25” High; RM-3008: 31.75” x 16.5” x 33.63” High.

All Packages include the Hannay N800 DEF Series Spring Rewind Reels Long the industry standard for durable, compact and efficient handling of single hose. Safe, non-sparking, self-powered industrial duty spring motors with S.S. internals and “True Blue” DEF hose with stainless steel MNPT ends.

Part No.

Description

RETAIL

HN 48-21 N816 DEF Series Spring Rewind Reel, 304SS Fluid Path, 1” SST Peroxide Cured Swivel Joint with EPDM Seals, 3/4” Female NPT Riser, 3/4” x 25’ “Tru Blue” DEF Hose with 3/4” SS MNPT Fittings, HS-35 Hose Stop Installed. * Specify Roller Position - See Above Chart, Note SR Position is standard............................................. $ 1184.56 HN 48-36 Same as Above Except with N818 DEF Series Reel and 3/4” x 50’ DEF Hose Assembly.......................................... 1301.14 HN 48-37 Same as Above Except with 1” Female FT Riser and 1” x 25’ DEF Hose Assembly............................................. 1338.66 HN 48-42 Same as Above Except with 1” Female FPT Riser and 1” x 50’ DEF Hose Assembly............................................. 1338.66

Fuel Delivery Reels Spring Rewind Fuel Delivery Reels from Reelcraft. Designed for mobile applications. Corrosion-resistant, powder-coated finish and ball bearing swivels with Viton® seals are standard. Models shown include UL330 and ULC fuel hose but reels can be ordered without hose if required. Rated to 50 PSI and 150° F. 3 Frame styles available. F7925OLP features a single arm pedestal base. F83, FD83 and FD84 reels have duel frame pedestal base. FD9350 and FD9450 have full frame, full reel base.

FD83075OLP F7925OLP

Dimensions Part No. Hose H W D Wt. RETAIL RF F7925OLP 3/4” x 25’ 20” 7” 20” 47 lbs. $ 651.24 RF F83050OLP 3/4” x 50’ 25” 10” 24” 89 lbs. 1089.42 RF FD83075OLP 3/4” x 75’ 25” 13” 24” 115 lbs. 1377.52 RF FD84050OLP 1” x 50’ 25” 16” 24” 115 lbs. 1201.98 RF FD9350OLPBW 3/4” x 50’ 26” 12” 26” 140 lbs. 1283.72 RF FD9450OLPBW 1” x 50’ 26” 12” 26” 157 lbs. 1370.82

FD9350OLPBW

Viton® is a registered trademark of DuPont Performance Elastomers

IND

DULTMEIER SALES • OMAHA, NE

(800) 228-9666

•

www.dultmeier.com

• DAVENPORT, IA

(800) 553-6975

E1060

High Pressure Hose Reels Pressure Wash Reels

Pressure Washer Reel

Roller Included

• Corrosion-Resistant, Powder-Coated Finish • Hand Crank Design with Balanced Brass Swivel • Drag Break to Prevent De-Spooling When Not in Use • Capacity of 100’ of 3/8” or 200’ • Tubular Design Protects Inlet Hose • Mounting Base is Included • Rated to 5,000 PSI • Dimensions: CT6100HN: 19” W x 13” D x 15” H. CTJ6200HN: 20” W x 16” D x 20” H.

Handle

Manual Rewind Hose Reel from Hannay. Ideal for portable or stationary pressure wash applications. Standard Features: • Manual Rewind • Constructed of 12 & 16 gauge steel with black, powder-coated finish • Rated to 4000 PSI and 400° F. • 1/2” Inlet swivel, 3/8” outlet fitting & adjustable bearing brake are standard • Hose guide roller assembly is also included • Rated to 12 GPM flow rate • Capacity is 150’ of 3/8” I.D. hose • Mounting base is included, but a variety of mounting kits are also available for pivot option or for mounting to square or round tubing

109

Part No. Capacity RF CT6100HN 100’ RF CTJ6200HN 200’

Floor Base Included

Wt. 17 lbs. 28 lbs.

RETAIL $ 200.67 268.00

Pressure Washer Reels

Shown with optional PWK200 mounting kit

Ideal for Equipment Cleaning & Pressure Wash Applications PWK-400

PWK200

High Quality Pressure Washer Reels from Reelcraft. Ideal for equipment cleaning and pressure washing applications. Compact design with quality steel construction. Reels feature manual hand crank. Can be used for floor or wall mounting. Standard color is Red. Hose capacity, maximum pressure and maximum temperature are shown. ** HS18000M is all stainless steel construction.

PWK300

Part No. HN PW2 Reel with Base & Roller

Capacity 150’ of 3/8” I.D.

Wt. 30 lbs.

RETAIL $ 332.32

Optional Mounting Kits Part No. RETAIL HN PWK150 For Floor Mounting with Ability to Pivot........................... $ 74.37 HN PWK200 For Wall Mount, Non Pivot.............................................. 56.28 HN PWK400 For Wall Mount with Ability to Pivot................................. 74.37 HN PWK300 For Mounting to 1” Round Tubing, No Pivot.................... 35.18 HN PWK301 For Mounting to 1-1/4” Round Tubing, No Pivot.............. 35.18 HN PWK302 For Mounting to 1” Square Tubing, No Pivot................... 35.18 HN PWK303 For Mounting to 1-1/4” Square Tubing, No Pivot............. 35.18

Spring Rewind Pressure Washer Reels Spring Rewind Pressure Washer Reels from Reelcraft. High quality steel construction with red powder-coated finish. Ideal for use in shops and garages. Rated to 5,000 PSI and 212° F. Designed for 1/4” or 3/8” I.D. hose, (not included). Fast, automatic return of hose into reel drum keeps hose out of the way and off the floor.

Wt. 43 lbs. 86 lbs.

RETAIL $ 531.98 789.26 D

Hand Carry Hose Reel

Economical Hose Reel on Hand Carry Frame. Great for pressure washing or sewer jetting. Powder-coated reel and carry handle base. Rated to 5,000 PSI and 185° F. Capacity is 100’ of 3/8” hose (not included). Whip inlet hose is included.

Hose Max. Part No. Capacity PSI Wt. RETAIL IP 2100357 3/8” x 100’ 5,000 20 lbs. $ 209.04

IND

Wt. RETAIL 34 lbs. $ 312.22 32 lbs. 363.14 32 lbs. 452.92 35 lbs. 345.72 36 lbs. 1053.24 35 lbs. 464.98

High Pressure Hose Reels from General Pump, Solid steel with durable powdercoated finish or Stainless Steel construction as shown.Full Flow swivel and mounting base is standard with all reels. D Series reels are rated to 185° F. Stainless reels are rated to 400° F. All are designed for 3/8” hoses which are not included.

PW81000OHP

Hose Max. Capacity PSI 3/8” x 50’ 5,000 3/8” x 100’ 5,000

Hose Max. Max. Part No. Capacity PSI Temp. RF H18006M 100’ of 3/8” I.D. 5000 210° F. RF H16000M 300’ of 3/8” I.D. 3000 210° F. RF H16000H 250’ of 3/8” I.D. 5000 210° F. RF H18000M 200’ of 1/2” I.D. 3000 210° F. RF HS18000M 200’ of 3/8” I.D. ** 3000 210° F. RF H29000M 125’ of 3/4” I.D. 3000 210° F. ** All Stainless Steel Construction.

High Pressure Hose Reels

(Hose not included)

Part No. RF PW7600OHP RF PW81000OHP

DULTMEIER SALES • OMAHA, NE

(800) 228-9666

•

D30002 & * SHR50 DHR50100 & D30006 DHR50150D Max. Part No.

Construction

Capacity

PSI

Wt.

RETAIL

IP D30002 Powder Coated Steel 100’ x 3/8” 4000 9 lbs. $ 81.07 IP D30006 Powder Coated Steel 200’ x 3/8” 4000 16 lbs. 141.71 IP DHR50100D Powder Coated Steel 100’ x 3/8” 5000 18 lbs. 129.31 IP DHR50150D Powder Coated Steel 150’ x 3/8” 5000 19 lbs. 173.87 IP SHR50 * Stainless Steel 100’ x 3/8” 5000 18 lbs. 356.44 Wall Mount Swivel Kit...................................... 47.17 IP 2100379 * Stainless with Plated Steel Base.

www.dultmeier.com

• DAVENPORT, IA

(800) 553-6975

E0917

Jetter & High Pressure Hose Reels

110

High Pressure Hose Reels

Jetter Hose Reels A Great Choice for Pressure Washing Applications Hose Reels designed for the Jetter/Sewer Industry. Available in hand carry or wheeled styles. Powder-coated, tubular steel frames. Designed for 1/4” through 1/2” hoses as shown. Rated for high pressures and high temperatures if needed. Also a great choice for pressure washing applications.

Model 80359 No. 80359 is a hand carry, hand crank reel with hose brake and lock. Rated to 5,000 PSI and 300° F. Standard with ball valve, pressure gauge and whip hose. This model also comes with a built in hose guide for ease of winding and unwinding hose. Capacity is 125’ of 1/4” or 100’ of 3/8” hose (not included). Swivel is 3/8”.

Hose Capacity 3/8” x 100’

Max. PSI 5,000

RETAIL CALL

Model 2100357 No. 2100357 is a hand carry, hand crank reel design rated to 5,000 PSI and 185° F. Capacity is 100’ of 3/8” hose (not included). Whip feed hose is included. General Pump imported brand.

Part No. FN 80225 FN 80226

Hose Capacity 3/8” x 100’ 3/8” x 200’

Wt. RETAIL 24 lbs. $ 160.47 31 lbs. 176.55

High Pressure Hose Reels Industrial Grade Portable Hose DHRA50300 Hose Reel Reels from General Pump. Ideal for use with pressure washers, jetter/sewer machines, turf/ tree care sprayers and more. Designed for use as is or can D be mounted to portable cart or stacked frame as shown below. Rated for pressures to 5,000 PSI and temperatures to 300° F. Solid steel construction with durable, grey powder coated finish. All reels are hand crank design with locking mechanism. Swivel is 1/2” FPT inlet x 3/8” FPT outlet. DHRA50300 and DHRA50450 have 5/8” garden hose adapter. (Hose not included). 2100465 cart or 2100437 dual stand are sold separately and will work with any of the DHRA Series shown.

80359

Part No. FN 80359

High Pressure Hose Reels are ideal for floor mount or frame mounting on pressure washers. Black, powder-coated finish. Hose guide is a standard feature for ease of use. Rated to 5,000 PSI. Swivel is 3/8” FPT.

2100465 Portable Cart Shown with Reel

2100357

Part No. IP 2100357

Hose Capacity 3/8” x 100’

Max. PSI Wt. 5,000 20 lbs.

2100437 Dual Stack

RETAIL $ 209.04 D

Pivot Style Hose Reel

Pivoting Hose Reel has 360° rotation to follow and track with operator movement. Direct hand crank with locking pin and lever brake. Solid steel construction with powder coated finish. Adjustable hose guide. Rated to 5000 PSI and 250° F. Capacity is 200 ft. of 3/8” hose. Lower arm base is 1-1/4”.

Maximum Part No. PSI Capacity Wt. IP DHRTM50200 5,000 3/8” x 200’ 39 lbs.

DHRA50150 Reel only has a *capacity of 150’ of 3/8” and 125’ of 1/2” hose. 18-3/4” high x 17” wide. DHRA50300 Reel only has a *capacity of 300’ of 3/8” and 250’ of 1/2” hose; 200’ of 5/8” and 175’ of 3/4” hose. 18-3/4” high x 24” wide. DHRA50450 Reel only has a *capacity of 450’ of 3/8”, 375’ of 1/2”, 325’ of 5/8” and 250’ of 3/4” garden hose. 18-3/4” high x 24” wide. 2100465 Portable Cart is steel construction with powder coat finish. Dimensions are 39” high x 21” wide x 26” deep. 10” Solid, no flat wheels. Designed for DHRA reels.

RETAIL $ 376.54

2100437 Dual Stack Frame is solid steel construction with powder coat finish. Designed for DHR Series reels. Part No. * Capacity IP DHRA50150 Hose Reel 150’ of 3/8” Hose IP DHRA50300 Hose Reel 300’ of 3/8” Hose IP DHRA50450 Hose Reel 450’ of 3/8” Hose IP 2100465 Portable Cart for DHR Series Reels. IP 2100437 Dual Stack Kit for DHR Series Reels

IND

DULTMEIER SALES • OMAHA, NE

(800) 228-9666

•

www.dultmeier.com

• DAVENPORT, IA

(800) 553-6975

Wt. 30 lbs. 32 lbs. 40 lbs. 33 lbs 22 lbs.

RETAIL $ 258.62 277.38 304.18 184.59 66.06

E0625

Sewer & Jetter Reels

111

Jetter Reels — Rated to 3000 PSI —

Hand Carry Jetter Reel

Portable Jetter Reel AT1100 Portable Jetter Reel is ideal for jetting hoses from 1/4” to 1/2” I.D. Rated to 3,000 PSI. Hand crank rewind. Standard with pneumatic tires and cam lock brake. One-piece base and removable handle. All steel construction. Swivel is 1/2” FPT and is rated to 3,000 PSI. Capacity is 350’ of 1/4”, 275’ of 3/8” and 175’ of 1/2” I.D. hose. Dimensions with handle installed are 21-1/2” wide x 22” deep x 39” high.

AT1100

H16-1416

Part No. HN H16-1416

H16 Hand Carry Hose Reel for pipe and drain cleaning applications. Ideal for jetting hoses up to 1/4”. Rated to 3,000 PSI. Easily holds up to 200’ of 1/4” I.D. hose. Tension brake is included. Manual, hand-crank design. Dimensions are 18-3/4” high x 12-1/2” wide x 14-3/4” deep.

Description Wt. Hand Carry Jetter Reel.............. 18 lbs.

RETAIL $ 380.56

Part No. HN AT1100

Description Wt. Portable Jetter Reel.................... 47 lbs.

RETAIL $ 548.06

Jetter/Sewer Reels HANNAY Reels for Jetter and Sewer hoses from 3/8” to 1” I.D. Ideal for pipe and drain cleaning. All steel construction with chain and sprocket drive on hydraulic or electric powered reels. Charcoal gray is standard paint finish but other colors are available to meet you specific needs.

Series 1500 Series 1500 Reels are available in Hand Crank, 12-Volt motor or hydraulic motor. Swivels are 1/2” FPT and are rated to 3,000 PSI. Reels will hold up to 400’ of 3/8” or 300’ of 1/2” I.D. hose. Dimensions are 28-1/2” wide x 19” deep x 19” high. D

Part No. HN 1526-17-18 HN E1526-17-18 HN HD1526-17-18 HN HGK15 HN HN HS3

Description Wt. RETAIL Hose Reel, Hand Crank.................... 31 lbs. $ 392.62 Hose Reel, 12-Volt Motor.................. 49 lbs. 913.88 Hose Reel, Hydraulic Motor.............. 46 lbs. 797.30 Hose Guide, Factory Installed........... 12 lbs. 179.56 C Roller Assembly, Factory Installed. 15 lbs. CALL Hose Stop as Option......................... - 24.79

HS3 Hose Stop

E1526-17-18

(Optional)

Series 6100 Series 6100 reels are standard with Hydraulic Motors. (12-Volt and pneumatic are also available). Swivels are 1/2” FPT and are rated to 5,000 PSI. 6122-23-24 will hold up to 600’ of 3/8” or 300’ of 1/2” I.D. hose. Dimensions are 23-1/4” deep x 26-1/4” wide x 24” high. 6122-25-26 will hold up to 750’ of 3/8” or 450’ of 1/2” I.D. hose. Dimensions are 25-1/4” deep x 26-1/4” wide x 26” high.

HS3 Hose Stop

(Optional)

Part No. HN HD6122-23-24 HN HD6122-25-26 HN HN HS3

HD6100 Series with “C” Roller

Description Wt. RETAIL Hose Reel, Hydraulic Motor.............. 164 lbs. $ 1964.44 Hose Reel, Hydraulic Motor.............. 175 lbs. 2090.40 C Roller Assembly, Factory Installed. 15 lbs. CALL Hose Stop as Option......................... - 24.79

Series 6200 Series 6200 reels are standard with Hydraulic Motors. Swivels are 1” FPT and are rated to 3,000 PSI. “A” Series Bottom Roller Assembly is also included with these models. 6222-39-40-16 will hold up to 500’ of 3/4” or 350’ of 1” I.D. hose. Dimensions are 39-1/2” deep x 29” wide x 40” high.

“A” Roller

6224-45-46-16 will hold up to 900’ of 3/4” or 500’ of 1” I.D. hose. Dimensions are 45-1/2” deep x 31” wide x 46” high.

Part No. HN HD6222-394016 HN HD6224-454616 HN HN HS3

IND

Description Wt. RETAIL Hydraulic Drive Reel........................ 520 lbs. $ 5025.00 Hydraulic Drive Reel........................ 610 lbs. 6287.28 C Roller Assembly, Factory Installed 15 lbs. CALL Hose Stop as Option........................ - 24.79

DULTMEIER SALES • OMAHA, NE

(800) 228-9666

•

HD6200 Series

HS3 Hose Stop (Optional)

www.dultmeier.com

• DAVENPORT, IA

(800) 553-6975

E0886

112

Pump Selection Guide For More Pump Choices See Our Product Index in the Back of this Catalog CENTRIFUGAL: Self-Priming or Non Self-Priming Designs. Good for Abrasive Liquids. Ideal for Spraying or Transfer. High Flows, Low Pressures (to 150 psi). Ag/Turf Spraying, Transfer, Irrigation, Recirculation, Petroleum. Electric Motor, Gas Engine, PTO or Hydraulic Driven.

DIAPHRAGM: High Pressure Ideal for Abrasive or Viscous Materials. Positive Displacement Design. Pressure Ranges to 1000 psi. Ag, Turf or Industrial Spraying. Electric Motor or Gas Engine Driven.

DIAPHRAGM: Low Pressure Ideal for Abrasive, Corrosive or Highly Viscous Materials. Low Volumes & Low Pressures. Agricultural or Turf Spray, Industrial Spraying, Carpet Cleaning. Air or Electric Driven.

GEAR: Excellent for transfer of highly viscous (clear) liquids at medium pressures (to 300 psi). Ideal for Petroleum and Industrial fluids. Electric Motor Driven.

PISTON/PLUNGER: High Pressure, Positive Displacement Design. Ideal for Pressure Wash, Car Wash, Industrial Cleaning Applications. Electric Motor, Gas Engine or PTO Driven.

ROLLER: Inexpensive, Medium Pressure (100-300 psi). Transfer & Spraying Pumps. Ideal for Agricultural and Turf Spraying of Herbicides & Pesticides. Usually PTO or Gas Engine Driven.

SUBMERSIBLE: Centrifugal Design. Sumps Pumps for Liquid Removal or Dewatering of Pits or Tanks or for use in Recirculation, Fountains, etc. Electric Motor Driven.

VACUUM: Excellent Choice for Slurry Tankers or Suction Units at Intermittent use.

GROUND DRIVE & SQUEEZE/METERING: Excellent Choice for Maintaining rate of application per acre at all ground speeds. Maintains a constant rate at any fluid level in the tank. Ideal for Fertilizer Products on Field Applications.

MAGNETIC DRIVE: Impeller Seal-Less Design for Leak-Proof Transfer or Recirculation of Certain Hard to Handle Liquids. Low pressure, Low Flow. Electric Motor Driven.

DRUM: Mounts to Drums or Pails for Fluid Transfer. Many Different Designs for a Wide Variety of Applications. Electric Motor (110 volt or 12 volt), Hand Driven and Air Operated.

FLEX IMPELLER: Inexpensive Transfer Pumps. Low Flow, Low Pressure. Ideal for Transfer, Dewatering, Recirculation or Mixing Applications. Electric Motor Driven. IND

DULTMEIER SALES • OMAHA, NE

(800) 228-9666

•

www.dultmeier.com

• DAVENPORT, IA

(800) 553-6975

Self-Priming Centrifugal Pumps FLOMAX & BANJO

113

LONG COUPLED Electric Motor Pumps

Self-Priming • Centrifugal • Cast Iron Construction

1-1/2", 2", & 3" 3 H.P. thru 15 H.P.

These Self-Priming Centrifugal Pumps are mounted on a rigid steel base to permit long coupling to an electric motor. Long Coupling design allows a wider choice of motors in both horsepower and type of enclosure. A LoveJoy jaw type coupling with rubber spider and coupling guard are standard. “S-flex” spacer type couplings are also available.

Cast Iron Construction

Standard Pump units are of cast iron construction. Bronze, Aluminum, and stainless steel pumps are available on special request. All fasteners are stainless steel to reduce corrosion. Impellers are balanced and trimmed to insure non-overloading conditions. The standard mechanical seal is stainless steel, Viton® carbon and ceramic which is self adjusting and corrosion resistant to handle many different liquids. Pump assemblies are fitted with heavy duty ball bearing pedestals for long life. (Pump, Base and coupling assemblies are available separately to fit existing standard NEMA motors.) The MP & BANJO WET SEAL PUMPS are equipped with a double seal arrangement where the seal is contained in an ethylene glycol (antifreeze) reservoir. This enables the pump to run dry for short periods of time without damaging the seal.

Cast Iron Impeller Stainless Steel Shaft Sleeve Viton® Mechanical Seals Stainless Fasteners TEFC Motors

Banjo "Wet Seal" Pump D

MP3530 FLOMAX 8 MP7513 FLOMAX 15

FLOMAX 8 (2")

50 40

3 30

2 20

1 10

90 80

70 60

BH P NPSH

TOTAL HEAD FEET (H)

3450 RPM

Banjo 5"

50 40

3 30

2 20

1 10

10 0  20 40 60 80 100 120 140 160 180 FLOW GPM (Q)

20 40 60 80 100 120 140

FLOW GPM (Q)

TOTAL HEAD FEET (H)

100

BH P NPSH

TOTAL HEAD FEET (H)

100

FLOMAX 15 (3")

3450 RPM

130 120 110 100 90 80 70 60 50 40 30 20 10

Banjo 6" HQ

BH P

3450 RPM

NPSH

FLOMAX 5 (1-1/2")

8 6 30 4 20 2 10 20 40 60 80 100 120 140 160 180 200 220 240 260 280 300 320

FLOW GPM (Q)

LONG COUPLED FLOMAX & BANJO Pump & Motor Units FLOMAX 10 (2") 3450 RPM 140 130 110

100 90 80 70 BH P NPSH

TOTAL HEAD FEET (H)

120

60 50

6 30

4 20

2 10

10 0

20 40 60 80 100 120 140 160 180 200 220

FLOW GPM (Q)

Viton® is a registered trademark of DuPont Performance Elastomers

IND

FLOMAX Max. GPM @ Max. Spec. Impeller Wt. Part No. Series GPM 20 PSI Gravity Ports HP Voltage Phase Dia. Lbs. RETAIL DU MP2010 5 120 105 1.0 1-1/2" 3 115/208/230 1 5.0" 145 $ 1975.16 DU MP2030 5 120 105 1.0 1-1/2" 3 230/460 3 5.0" 162 2008.66 DU MP3115 5 120 105 1.7 1-1/2" 5 230 1 5.0" 165 2198.94 DU MP3315 5 120 105 1.7 1-1/2" 5 208-230/460 3 5.0" 170 2055.56 DU MP3010 8 140 110 1.0 2" 3 115/208/230 1 5.0" 156 1973.82 DU MP3030 8 140 110 1.0 2" 3 208-230/460 3 5.0" 165 1933.62 DU MP4010 *8 140 110 1.0 2" 3 230 1 5.0" 145 2366.44 DU MP4030 *8 140 110 1.0 2" 3 208/230/460 3 5.0" 125 2346.34 DU MP3510 8 140 110 1.7 2" 5 230 1 5.0" 165 2383.86 DU MP3510W *8 140 110 1.7 2" 5 230 1 5.0" 165 2776.48 DU MP3530 8 140 110 1.7 2" 5 208-230/460 3 5.0" 145 2031.44 DU MP3530-SC ** 8 140 110 1.7 2” 5 208-230/460 3 5.0” 145 2334.28 DU TK3530W-A * 8 170 85 1.7 2" 5 208-230/460 3 5.0" 150 2323.56 DU MP3530W *8 140 110 1.7 2" 5 208-230/460 3 5.0" 145 2580.84 DU MP5010 10 215 210 1.0 2" 5 230 1 5.75" 210 3225.38 DU MP5030 10 215 210 1.0 2" 5 208-230/460 3 5.75" 190 2690.72 DU MP7510 10 200 200 1.2 2" 7.5 230 1 5.75" 230 3524.20 DU MP7530 10 200 200 1.2 2" 7.5 208-230/460 3 5.75" 210 3002.94 DU MP7513 15 300 275 1.2 3" 7.5 230 1 5.75" 230 3612.64 DU MP7533 15 300 275 1.2 3" 7.5 208-230/460 3 5.75" 280 2986.86 DU TK1013W * - 330 280 1.4 3" 10 208-230 1 6.0" 280 4348.30 DU TK1033W * - 330 280 1.4 3" 10 208-230/460 3 6.0" 280 3717.16 DU MP1013 15 300 275 1.4 3" 10 230 1 6.0" 240 3847.14 DU MP1033 15 300 275 1.4 3" 10 208-230/460 3 6.0" 300 2934.60 DU MP1533 15 300 275 2.0 3” 15 208-230/460 3 6.0” 380 3785.50 DU MP1533HF †15 350 350 1.4 3" 15 208-230/460 3 5.9" 380 5393.50 * Wet Seal Pump with Double Severe Duty Seal Assembly. † High Flow Pump with severe duty double grease lubricated seal & 5 blade DI impeller. ** Pump has single silicon-carbide Viton® seal (severe duty). Water=8.33 lbs./Gal.=1.0 Specific Gravity 12 lbs./Gal.=1.4 S.G. 14 lb./Gal.=1.7 S.G. 17.5 lb./Gal.=2.15 S.G.

DULTMEIER SALES • OMAHA, NE

(800) 228-9666

•

www.dultmeier.com

• DAVENPORT, IA

(800) 553-6975

E0217

Self-Priming Centrifugal Pumps

114

FLOMAX Close Coupled Electric Motor Driven Pumps Self Priming • Centrifugal • Cast Iron Construction Pumps are of cast iron construction to suit a wide variety of liquids. All fasteners are stainless steel to reduce corrosion. Impellers are balanced and trimmed to insure non-overloading conditions. Standard Stainless Steel and Viton® mechanical seal is self-adjusting and corrosion resistant to handle many different liquids. Pump assemblies are offered with TEFC motors, or as PUMP PAKS only to fit customer’s standard motor.

Cast Iron Construction Cast Iron Impeller Stainless Steel Shaft Sleeve Viton® Ceramic Seals Stainless Fasteners

MP253C FLOMAX 10

MP231C FLOMAX 8

MP123C FLOMAX 5

FLOMAX 10

2" X 2" Self-Priming Pump 3450 RPM S.G. = 1.0

FLOMAX 8

2" X 2" Self-Priming Pump 3450 RPM S.G. = 1.0

FLOMAX 5

1-1/2" X 1-1/2" Self-Priming Pump 3450 RPM S.G. = 1.0

CLOSE COUPLED PUMP/MOTOR UNITS

Max. Spec. Part No. Series Ports HP Phase Gravity Volts DU MP121C Flomax 5 1-1/2" 2 1 1.0 230 DU MP123C Flomax 5 1-1/2" 2 3 1.0 230/460 DU MP231C Flomax 8 2" 3 1 1.0 230 DU MP231CA Flomax 8 2" 3 1 1.4 230 DU MP233C Flomax 8 2" 3 3 1.0 230/460 DU MP233CA Flomax 8 2" 3 3 1.4 230/460 DU MP253C Flomax 10 2" 5 3 1.0 230/460 DU MP273C Flomax 10 2" 7.5 3 1.4 230/460 DU MP373C Flomax 15 3" 7.5 3 1.0 230/460

Max. Impeller Wt. GPM Dia. Lbs. RETAIL 110 4.625" 105 $ 1608.00 110 4.625" 105 1865.28 140 5.0" 110 1675.00 120 4.62” 110 1668.30 140 5.0" 110 1483.38 120 4.62” 110 1693.76 200 5.5" 170 2744.32 210 5.75" 175 2843.48 300 5.75" 175 2929.24

Note: Water=8.33 lbs./Gal.=1.0 Specific Gravity

14 lb./gal. Material=1.7 S.G.

12 lb./gal. Material=1.4 S.G.

MP373C FLOMAX 15 D

PUMP END ONLY:

For Close Coupled Electric Motor Driven Units FLOMAX 5 & 8 Series self-priming centrifugal pumps use a special adaptor and mount directly to standard NEMA “C” frame motors without bases. FLOMAX 10 & 15 Series pump are designed to fit standard NEMA “C” frame motors with standard armature shafts.

FLOMAX 15

Part No. Wt. RETAIL FLOMAX 5 MX 26092 Pump with 5/8" sleeve & Foot Adapter for 1-1/2" NEMA 56C motor without base.....................38 lbs. $ 812.04

FLOMAX8 MX 25922 Pump with 7/8" sleeve & Foot Adapter for 2" NEMA 184C/145TC motor without base........38 lbs.

3" X 3" Self-Priming Pump 3450 RPM S.G. = 1.0

645.88

MX 26079 Pump with 5/8" sleeve & Foot Adapter for NEMA 56C motor without base.....................38 lbs.

649.90

MX 28181 Flomax 8 Pump Pack with 4-5/8” Impeller to fit 56C 3-HP Motor ............38 lbs.

841.52

FLOMAX10 MX 21366 Pump with 5-3/4" Dia. Impeller 2" to close couple to NEMA 182TC/184TC frame motors with base ................................67 lbs. 1263.62 FLOMAX15 MX 24834 Pump with 6.0" Dia. Impeller 3" to close couple to NEMA 182TC/184TC frame motors with base ................................67 lbs. 1085.40 Viton® is a registered trademark of DuPont Performance Elastomers

IND

DULTMEIER SALES • OMAHA, NE

(800) 228-9666

•

www.dultmeier.com

• DAVENPORT, IA

(800) 553-6975

E0218

Self-Priming Centrifugal Engine Pumps Gasoline Engine Driven Centrifugal Pump Units

TOTAL HEAD - FEET

• Self-Priming • Cast Iron Construction

SUCTION LIFT

• Cast Iron Impeller

MODEL FLOMAX 15 SIZE 3 X 3 IMPELLER DIA. 6.00 MAX. SOLIDS 0.75 DIA.

TOTAL HEAD - FEET

MP38GH

GALLONS PER MINUTE

MODEL FLOMAX 10 SIZE 2 X 2 IMPELLER DIA. 6.00 MAX. SOLIDS 0.75 DIA.

• Viton®/Ceramic Seals • Stainless Fasteners

SUCTION LIFT

GALLONS PER MINUTE

• Stainless Steel Shaft Sleeve D

MODEL FLOMAX 8 SIZE 2 X 2 IMPELLER DIA. 5.00 MAX. SOLIDS 0.56 DIA.

MODEL FLOMAX 5 SIZE 1-1/2 X 1-1/2 IMPELLER DIA. 5.00 MAX. SOLIDS 0.56 DIA.

1-1/2" • 2" • 3" 5 to 13 HP

115

SUCTION LIFT SUCTION LIFT

GALLONS PER MINUTE

Part No. Series Engine Ports DU MP25GH Flomax 8 5 HP Honda............................. 2" x 2" DU MP38GH Flomax 15 8 HP Honda............................. 3" x 3" DU MP38GHE Flomax 15 8 HP Honda Electric Start......... 3" x 3" DU MP313GH Flomax 15 13 HP Honda............................. 3” x 3” DU MP313GHE Flomax 15 13 HP Honda Electric Start...... 3” x 3” DU TK311GHE #Banjo 3” 11 HP Honda Electric Start...... 3” x 3” DU TK311GH #Banjo 3" 11 HP Honda............................. 3" x 3" DU MP313PPE Flomax 15 13 HP *PowerPro Electric Start 3” X 3” # Banjo Units include double “wet” seal. * PowerPro Engines by Hypro.

TK311GHE

Flomax Max. Impeller Shut-Off Series Ports Flow Diameter Head (Ft.) 5 1-1/2" 105 5.0" 80 8 2" 140 5.0" 80 10 2" 195 6.0" 110 15 3" 290 6.0" 115

“Pump Packs”

These 2” x 2” High Head, Self-Priming Pumps are suitable for a wide variety of liquid transfer applications, especially D those requiring discharge heads than standard self-priming pumps. High suction port centerline and special impeller design also provides for high suction lift capability (up to 25’ suction lift with water at 60 GPM flow rates). Cast iron bodies/impellers and Viton® mechanical seals. Complete pump units include 10 HP TEFC motors, steel baseplates (powder-coated) and “Orange Peel” OSHA approved coupling guards.

for Engines

These Flomax Pump Packs can be mated to Briggs & Stratton, Honda, Tecumseh or PowerPro engines. Cast iron bodies; Viton®, carbon and ceramic mechanical seals.

Part No. FLOMAX 5 (1-1/2") Wt. MX 21302 Pump Only for use with 3/4" crankshaft pump engine .................... 37 lbs. FLOMAX 8 (2") MX 21327 Pump Only for use with 3/4" crankshaft pump engines .................. 38 lbs.

FLOMAX 10

RETAIL $ 447.56

400.66

Max. Flowrate Shut-Off Wt. Part No. Description Ports S.G. @ 65 PSI Pressure Lbs. RETAIL MX 36033 Pedestal Pump Only 2” x 2” - 100 GPM 90 PSI 72 $ 1441.84 DU MPHH22 2” x 2” Pump Unit 10 HP, 1 Phase Motor 2” x 2” 1.31 100 GPM 90 PSI 360 4491.68 DU MPHH22A 2” x 2” Pump Unit 10 HP, 3 Phase Motor 2” x 2” 1.31 100 GPM 90 PSI 360 3556.36 DU MPHH22B 2” x 2” Pump Unit 7.5 HP, 3 Phase Motor* 2” x 2” 1.31 100 GPM 90 PSI 300 3534.92 * Use 7.5 HP Version for Water Only.

(2")

MX 21354 Pump Only for use with 1" crankshaft Honda, Kohler or PowerPro engine, also Briggs with 22348 shim adaptor . 65 lbs.

860.28

FLOMAX 15 (3")

MX 21372 Pump Only for use with 1" crankshaft Honda, Kohler or PowerPro engine also Briggs with 22348 shim adaptor. 68 lbs.

RETAIL $ 999.64 1878.68 2105.14 1938.98 2237.80 2669.28 2350.36 1802.30

2” x 2” High Head Self-Priming Pump Units

FLOMAX

Max. Wt. S.G. Lbs. 1.4 76 1.0 140 1.0 140 1.6 155 1.6 155 1.4 150 1.4 150 1.5 150

816.06

Viton® is a registered trademark of DuPont Performance Elastomers

IND

DULTMEIER SALES • OMAHA, NE

(800) 228-9666

•

www.dultmeier.com

• DAVENPORT, IA

(800) 553-6975

E0219

Flomax Self-Priming Centrifugal Pumps FLOMAX 5 - 1-1/2"

FLOMAX Pedestal Pumps TOTAL HEAD FEET (H)

1-1/2" • 2" • 3"

FLOMAX 10 - 2"

TOTAL HEAD FEET (H)

Self Priming Viton® Ceramic Seals Stainless Fasteners Cast Iron Construction Cast Iron Impeller Stainless Steel Shaft Sleeve

FLOW GPM (Q)

FLOMAX 8 - 2"

These basic pumps include a Bearing Pedestal and base. They can be long coupled to an electric motor or gasoline engine or can be belt driven. Bearing Pedestals are also available with electro magnetic or manual clutch drives, shown on adjacent pages. Components can be supplied for field assembly or they can be shipped as a ready to use unit. Stainless steel available.

TOTAL HEAD FEET (H)

FLOW GPM (Q)

FLOMAX 15 - 3"

FLOW GPM (Q)

Shaft HP Req’d Wt. Part No. Series Ports Construction Diameter Water Fert. Lbs. RETAIL MX 21312 FLOMAX 5 1-1/2" FPT Cast Iron 3/4" 3 5 44 $ 546.72 MX 21339 FLOMAX 8 2" FPT Cast Iron 3/4" 3 5 44 542.70 MX 36061 FLOMAX 8 2” FPT Cast Iron with Sil-Carbide Viton® Seal 3/4” 3 5 44 877.70 MX 33961 FLOMAX 8 2" FPT # Cast Iron with Double Seal 3/4" 5 7.5 44 1038.50 MX 21363 FLOMAX 10 2” FPT Cast Iron 1” 7.5 10 85 1042.52 MX 21381 FLOMAX 15 3" FPT Cast Iron 1" 7.5 10 85 984.90 MX 32031 FLOMAX 15 3" FPT # Cast Iron with Double Seal 1" 10 15 85 2390.56 # Model 33961 & 32031 have Double Seal - Can be run dry. Also available for C-Face or Engine Drive - See previous page.

TOTAL HEAD FEET (H)

116

FLOW GPM (Q)

MP PUMPS

Hydraulic Motor Drive Pedestal Pump

FLOMAX

FLOMAX 10 & 15

MODEL FLOMAX 15 SIZE 3 X 3 IMPELLER DIA. 5.75 MAX. SOLIDS .56

GALLONS PER MINUTE

C/N 7029

FLOMAX Hydraulic Driven Self-Priming Centrifugal Pumps are capable of pumping a wide variety of liquids at capacities up to 300 GPM, heads to 130 feet and lifts to 25 feet. Cast iron with removable flanges, replaceable wear plates and S.S. fasteners are standard. (S.S. Available).

OIL PRESSURE - PSI

TOTAL HEAD-FEET

FLUID FLOW GPM (Q)

OIL PRESSURE - PSI

TOTAL HEAD-FEET

FLOMAX 15 15 GPM OIL FLOW

MODEL FLOMAX 10 SIZE 2 X 2 IMPELLER DIA. 5.75 15 GPM OIL FLOW MAX. SOLIDS .56

INTERMITTENT DUTY

2" & 3" Sizes

Self-Priming - Centrifugal Cast Iron Construction Viton® Ceramic Seals Stainless Fasteners INTERMITTENT DUTY

FLOMAX 10

MP Hydraulic Motor Units can also be adapted to Flomax Pumps that are equipped with the proper mounting attachments; call with pump model numbers. Note: Your hydraulic system must match hydraulic motor specifications shown below — DO NOT OVERSPEED. Viton® is a registered trademark of DuPont Performance Elastomers

C/N 7030

Part No. MX 36447 MX 28551

HYDRAULIC PEDESTAL & MOTOR Hydraulic Pedestal Drive/Flomax 5/8 ... Hydraulic Pedestal Drive/Flomax 10/15.

Wt. 16 lbs. 29 lbs.

Part No. MX 28544 PA 8301

HYDRAULIC MOTORS & REPAIR KITS Seal Kit Parker Ultra Motor for Flomax 10/15 .... MX 30045 Motor Seal Repair Kit for 28544 Motor. -

RETAIL $ 1043.86 1275.68 RETAIL $ 889.76 87.10

HYDRAULIC PUMP/MOTOR UNITS COMPLETE Motor Motor Part No. Ports Dispense/Rev. Max. Oil flow MX 35272 FLOMAX 8 2" .37 cu. in. 9 GPM

MX 28552 FLOMAX 10 2" .73 cu in. 15 GPM MX 28553 FLOMAX 15 3" .73 cu in. 15 GPM MX 34223 † FLOMAX 15 3” .73 cu in. 15 GPM * 2" FPT Ports on Pump; No Flanges. † 34223 is Double Seal.

IND

DULTMEIER SALES • OMAHA, NE

Max. Oil PSI

2,000 PSI 2,000 PSI 2,000 PSI 2,000 PSI

(800) 228-9666

•

Wt.

RETAIL

48 lbs. $ 1273.00 92 lbs. 2028.76 96 lbs. 1914.86 96 lbs. 3358.04

www.dultmeier.com

Hydraulic Pedestal & Motor

• DAVENPORT, IA

(800) 553-6975

E0220

MP Flomax Centrifugal Pump Parts

117

MP Flomax PUMPS COMPOSITE PARTS LIST Flomax 5 & 8 • Flomax 10 & 15 CAST IRON MODELS ONLY 9

“Pump Pak” Version

MP / F lom Repair ax Pump Availa ble

24 5

26 7

NOTE: Impeller & Shaft 26 are one piece on FLOMAX 10 & 15 Pumps

20 15

34 11

22 23 21

Flomax 5 & 8

Ref. No. Part No. 1 MX 22247 MX 25904

Description RETAIL Adapter, Engine, Clutch or Pedestal mount for belt or direct drive............ $ 164.49 Close Coupled Electric................................... 203.68

2 3 5 7 8

Housing Assy, Cast Iron................................... 389.94 Stainless Stud 5/16”......................................... 4.31 Impeller (5" Dia)................................................ 62.71 Impeller Clamp................................................. 33.23 Inlet Flange 1-1/2"............................................ 38.06 Inlet Flange 2".................................................. 41.41

MX 23021 MX 28059 MX 22293 MX 23002 MX 22263-B MX 22387-B

10 11 15 16 20 21 22 23 24 26 29 32 35

MX 22272 Viton® Seal Assembly...................................... 54.94 MX 22560 Severe Duty Seal.............................................. 218.42 MX 22286 Drive Sleeve..................................................... 71.02 MX 33624 Viton® Flapper - (23022 Buna) (26097 EPDM).... 50.52 MX 21242 Capscrew......................................................... 1.62 MX 23024 Wear Plate........................................................ 38.06 MX 21249 Flat Head Screw - 37137 (for 2012 & Later Models). 2.29 MX 21248 Annular Gasket................................................. 0.80 MX 22255 Gasket (Viton®)................................................ 3.10 MX 34555 O-Ring (for 2012 & Later Models).................... 9.98 MX 37141 Outlet O-Ring (Viton®; for 2012 & Later Models)... 4.31 MX 25933 Outlet Gasket, EPDM (for All Model Years)...... 4.18 MX 21238 Lock Washer..................................................... 0.40 MX 21237 Acorn Nut......................................................... 2.83 MX 22655 Jam Nut............................................................ 4.18 MX 22321 Woodruff Key.................................................... 1.21

29 26

Flomax 10 & 15 Description RETAIL Adapter, Belt Pedestal or Direct Drive............... $ 253.26 & Adapter for 8 HP Briggs, Honda & Wisc......... Housing Assemby, Cast Iron............................. Capscrew.......................................................... Impeller with Shaft Sleeve (one piece); 6” Impeller Impeller with Shaft Sleeve; 5-3/4”...................... Impeller with Shaft Sleeve; 5-1/2”...................... Impeller Clamp.................................................. Inlet Flange 2"................................................... Inlet Flange 3"...................................................

829.46 9.85 219.76 304.18 755.76 50.52 56.95 75.71

9 MX 22372-B Outlet Flange 2"................................................ MX 22471-B Outlet Flange 3"................................................

42.21 64.72

0 MX 22361 Viton® Seal Assembly ...................................... 1 MX 26461 Severe Duty Seal............................................... 11 See Ref. #5 Drive Sleeve & Impeller (one piece).................. 15 MX 26100 EPDM Flapper - (23040 Buna) (33626 Viton®)...... 16 MX 21291 Capscrew.......................................................... 20 MX 22376 Wear Plate......................................................... 21 MX 21262 Flat Head Screw - 37115 (for 2012 & Later Models).. 22 MX 21271 Annular Gasket.................................................. 23 MX 22240 Gasket .............................................................. MX 29715 O-Ring (for 2012 & Later Models)..................... 24 MX 37138 Viton® O-Ring (for 2012 & Later Models)......... MX 26101 EPDM Gasket (for All Model Years)................... 25 CN A1135 Pipe Plug........................................................... 26 MX 21266 Lock Washer...................................................... 27 MX 21269 Capscrew.......................................................... 29 MX 21263 Acorn Nut..........................................................

Pedestal Assembly 36 MX 26142 Pedestal Assembly........................................... 296.14 MX 26140 Pedestal Body.................................................. 172.53 MX 26085 Shaft - 3/4"....................................................... 75.71 MX 22300 Ball Bearing...................................................... 27.74 MX 21695 Snap Ring......................................................... 4.18 MX 22564

26 16

Ref. No. Part No. 1 MX 22348 2 MX 23035 3 MX 21260 5 MX 23038 MX 24721 MX 24792 7 MX 23039 8 MX 22369-B MX 22468-B

9 MX 22266-B Outlet Flange 1-1/2".......................................... 35.11 MX 22311-B Outlet Flange 2"................................................ 33.77

OVERHAUL KIT –............................................ 268.00 Includes all Part Numbers in Red and Includes parts to repair both “Old Style” & “New Style” (Jan. 2012 or later) Flomax Pumps.

Other Optional Items MX 37186 2” Full Port 220 Flange for Discharge Port....... $ 33.63 MX 37188 2” Full Port 220 Flange for Suction Port........... 36.45

MX 22425

94.47 219.76 CALL 69.68 3.10 68.34 4.31 1.07 4.05 7.84 5.92 8.51 1.07 0.54 3.77 3.63

Woodruff Key.....................................................

1.76

Pedestal Assembly 36 MX 26164 Pedestal Assembly............................................ MX 26161 Pedestal Body................................................... MX 26162 Shaft - 1"........................................................... MX 22035 Snap Ring.......................................................... MX 25474 Ball Bearing.......................................................

373.86 241.20 89.11 5.39 41.14

MX 22566

399.32

OVERHAUL KIT –.............................................

Includes all Part Numbers in Red and Includes parts to repair both “Old Style” & “New Style” Pumps (Jan. 2012 or later) Viton® is a registered trademark of DuPont Performance Elastomers

DULTMEIER SALES • OMAHA, NE

(800) 228-9666

•

www.dultmeier.com

• DAVENPORT, IA

(800) 553-6975

E0221

Self-Priming Centrifugal Pumps

118

The Original Vac-U-Double Seal Pump — Motor Drive & Hydraulic Driven —

The Centrifugal Pump that is designed to Outlast Your Equipment When it comes to high volume transfer pumping of liquid fertilizers, agchemicals, liquid deicers, water and many other liquids, this series of John Blue VacU-Double Seal Centrifugal pumps is considered the leader. The patented Vac-U-Seal system is derived from an inner function of the pump. The impeller applies vacuum pressure or suction to the seal, along with a double “wet” seal, keeps harmful corrosive liquids and abrasive particles from entering the seal. This unique method of lubrication provides extended life for the seal, eliminates thrust loads increasing bearing life, and allows the pump to be operated dry without damaging the unit. • Patented Vac-U-Double Seal design eliminates pressure on the seal resulting in long seal life. • Closed type hydraulically balanced impeller eliminates thrust loads for increased bearing life. Wear actually improves impeller efficiency. • No adjustments of impeller necessary with shims. • Pump can be operated DRY without damaging the seal.

• Cast iron heavy wall section provides extended life to unit. • Total Dependability and Versatility. • Designed for Many Chemicals and Fertilizers. • Speeds to 3600 RPM. • 2 Year Unconditional Warranty (Centrifugal Pumps Only). • Long Coupled Units Include “Orange Peel” OSHA Approved Guard.

Next Generation 3” Self-Priming Centrifugal Pump FEATURES:

• 2-in-1 Inlet Design (patent pending). Select from (2) Inlet Locations on (1) 3” Self Priming Pump. • The Standard Lower Inlet (top pump), with Backflow Check Valve, Yields Maximum Pump Flow. • The Higher Inlet (lower pump), Allows the Outlet Lines to Drain After Shutoff While Retaining Self-Priming Capability On Next Start-Up.

S3220 Straight 2" Pump • Double Viton® Wet Seal • 197 Maximum GPM • 39 Maximum PSI • 3600 Maximum RPM • 5 HP • 2" FPT • Electric, Gas, Hydraulic

3” X 3” Self-Priming Close Coupled Model

3” X 3” Straight Centrifugal Pedestal Pump

Hydraulic Motor Model

3” Self Priming Pedestal Pump

Electric Motor Model (Long Coupled Version Shown)

BARE PUMPS WITH PEDESTAL MOUNT FOR LONG COUPLED DRIVE Max.Flow Flow @ †HP Wt. Part No. Description GPM 25 PSI Req’d Lbs. RETAIL BU S3220P 2" Straight Pump 3/4" Shaft............ 197 140 5 44 $ 923.26 BU SP3240P 2" Self Priming Pump 3/4" Shaft .... 152 112 5 71 991.60 BU S3320P 3" Straight Pump 1-1/8".................. 365 310 10 120 1539.66 BU SP3340P 3” Self Priming Pump, 1-1/8”......... 340 265 10 120 1687.06 BU SP3350P 3” Self Priming Pump, 1-1/8”......... 400 365 15 140 1685.72 BU S3325P 3” Straight Truck Pump 1-1/8”....... *463 430 15 125 1606.66 BU SP3345P 3” Self Prime Truck Pump, 1-1/8”.. 340 265 10 140 1889.40 * 463 GPM at 4500 RPM for Straight Truck Pump. † For 10.8 Lb/Gal. Liquids. ** 308 GPM at 3500 RPM for 3” Self-Priming Truck Pump.

Max. Max. CLOSE COUPLED MOTOR PUMP UNITS Spec. Flow Flow at Part No. Description Grav. GPM 25 PSI Wt. RETAIL BU SP3240E5T3B 2” 5 HP/3PH Self Prime/Close Cpld..... 1.5 200 112 150 lbs. $ 1807.66 BU SP3240E5T1B 2” 5 HP/1PH Self Prime/Close Cpld..... 1.5 200 112 160 lbs. 2137.30 BU SP3340E10TB 3” 10 HP/3PH Self Prime/Close Cpld... 1.5 340 265 270 lbs. 2801.94 BU SP3340E10TB-1 3” 10 HP/1PH Self Prime/Close Cpld... 1.5 340 265 280 lbs. 3931.56 BU S3320E15T 3” 15 HP/3PH Straight/Close Cpld....... 1.5 365 310 463 lbs. 2572.80 BU SP3350E15TB 3” 15 HP/3PH Self Prime/Close Cpld... 1.5 400 365 470 lbs. 3209.30 BU SP3450E20TB 4” x 3” 20 HP/3PH Self Prime/Close Cpld 1.4 560 470 525 lbs. 3959.70 PUMPS WITH HYDRAULIC DRIVE Max. Flow Flow at Part No. Description GPM 25 PSI Req’d Oil RETAIL BU S3325-PH 3" Straight, Hydraulic Drive............. 365 310 22-25 GPM $ 2973.46 BU SP3345-PH 3" Self Priming, Hydraulic Drive...... 340 265 22-25 GPM 3295.06 BU SP3345-PHL 3” Self Priming, Hydraulic Drive..... 340 265 12-14 GPM 3107.46

IND

S3325P Straight 3" Truck Pump • Double Viton® Wet Seal • 463 Maximum GPM (at 4500 RPM) • 99 Maximum PSI • 4500 Maximum RPM • 16.5 HP with PTO Drives • 3" FPT

BU1533 3" Self Priming Pump • Double Viton® Wet Seal • 400 Maximum GPM • 64 Maximum PSI • 3500 Maximum RPM • Long Coupled

Max. Max. BASE MTD. LONG COUPLED MOTOR PUMP UNITS Spec. Flow Flow at Part No. Description Grav. GPM 25 PSI Wt. RETAIL DU BU3510S 2” 5 HP/1PH Straight/Long Coupled......... 1.2 197 140 150 lbs. $ 2779.16 DU BU3530S 2” 5 HP/3PH Straight/Long Coupled......... 1.2 197 140 145 lbs. 2600.94 DU BU3530 2" 5 HP/3PH Self Prime/Long Coupled...... 1.4 152 112 150 lbs. 2436.12 DU BU7533 3" 7.5 HP/3PH Self Prime/Long Coupled... 1.0 340 265 250 lbs. 3453.18 DU BU1031A 3" 10 HP/1PH Straight/Long Coupled........ 1.0 365 310 280 lbs. 4714.12 DU BU1033 3" 10 HP/3PH Self Prime/Long Coupled.... 1.3 340 265 280 lbs. 4076.28 DU BU1031 3” 10 HP/1PH Self Prime/Long Coupled... 1.3 340 265 280 lbs. 4988.82 DU BU1533 3" 15 HP/3PH Self Prime/Long Coupled.... 1.5 400 365 320 lbs. 4407.26 DU BU1533A 3" 15 HP/3PH Straight/Long Coupled........ 1.6 365 310 300 lbs. 4322.84 1.0 Specific Gravity Pumps for Water Only; Use 1.3 & Higher Specific Gravity Pumps for Fertilizer & Other Heavy Liquids. Viton® is a registered trademark of DuPont Performance Elastomers

DULTMEIER SALES • OMAHA, NE

(800) 228-9666

•

www.dultmeier.com

• DAVENPORT, IA

(800) 553-6975

E0228

Self-Priming Centrifugal Pumps

119

The Vac-U-Double Seal Self-Priming Pump — Gas Engine Driven • Cast Iron & Polypropylene — The Centrifugal Pump that is Designed to Outlast Your Equipment When it comes to high volume, low pressure pumping of liquid fertilizers, agchemicals, liquid deicing, water, etc., this series of John Blue Vac-U-Double Seal Centrifugal pumps is considered the leader. The patented Vac-U-Seal system is derived from an inner function of the pump. The impeller applies vacuum pressure or suction to the seal, along with a double “wet” seal, keeps harmful corrosive liquids and abrasive particles from entering the seal. This unique method of lubrication provides extended life for the seal, eliminates thrust loads increasing bearing life, and allows the pump to be operated dry without damaging the unit. • Patented Vac-U-Double Seal design eliminates pressure on the seal resulting in long seal life. • Closed type hydraulically balanced impeller eliminates thrust loads for increased bearing life. Wear actually improves impeller efficiency. • No adjustments of impeller necessary with shims. • Pump can be operated DRY without damaging the seal.

• Cast iron or polypropylene heavy wall section provides extended life to unit. • Total Dependability and Versatility. • Designed for Many Chemicals and Fertilizers. • Speeds to 3600 RPM. • 2 Year Unconditional Warranty (Centrifugal Pumps Only). • Long Coupled Units Include “Orange Peel” OSHA Approved Guard.

Next Generation 2” & 3” Self-Priming Centrifugal Pumps FEATURES:

• 2-in-1 Inlet Design (patent pending). (2) Inlet Locations on (1) 3” Self Priming Pump. • The Standard Lower Inlet (top pump), with Backflow Check Valve, Yields Maximum Pump Flow. • The Higher Inlet (lower pump), Allows the Outlet Lines to Drain After Shutoff While Retaining Self-Priming Capability On Next Start-Up.

SP3350BS 3” Cast Iron Self Priming Centrifugal Pump Less Engine

25GHSP-P Polypropylene

313GHE-HF Cast Iron

CAST IRON PUMPS Spec. Max. Flow Flow at HP Part No. Description Gravity GPM 25 PSI Engine Req’d BU SP3240 2” SP Pump only for 3/4”, for 5 HP Gas Engine Drive - 152 112 5 BU SP3350BS 3” High Flow SP Pump Only for 1”, For 13 HP Gas Engine Drive - 400 365 13 BU SP3450BS 4”x3” High Flow SP Pump Only for 1”, For 20 HP Gas Engine Dr. - 560 470 20

Ports Wt. RETAIL 2” FPT 62 lbs. $ 655.26 3” FPT 92 lbs. 1298.46 4” X 3” FPT 100 lbs. 1326.60

CAST IRON GAS DRIVEN PUMP UNITS DU BU25GH 2" Straight/5.5 HP Honda............................ DU BU25GHSP 2" Self Priming/5.5 HP Honda..................... DU BU25PP 2" Self Priming/5.5 HP PowerPro................ DU BU313GH-HF 3” Self Priming/13 HP Honda...................... DU BU313GHE-HF 3” Self Priming/13 HP Honda/Electric Start. DU BU313GHE-HF-F 3” Self Priming/13 HP Honda/Electric Start. BU SP3350-G14KFLG 3” SP Pump/14 HP Kohler/Electric Start.....

1.4 1.4 1.4 1.3 1.3 1.3 1.3

197 200 200 400 400 400 400

140 112 112 365 365 365 365

Included Included Included Included Included Included Included

2” FPT 2” FPT 2” FPT 3” FPT 3” FPT 3” Flanged 3” Flanged

105 lbs. 160 lbs. 105 lbs. 210 lbs. 220 lbs. 220 lbs. 220 lbs.

1223.42 1436.48 1055.92 2441.48 2706.80 2753.70 2603.62

POLYPROPYLENE PUMPS ONLY BU PSP3240 2” Self Priming Pump Only for 3/4”, 5 HP Gas Engine Drive -

200

112

5.5

2” FPT

15 lbs.

360.46

POLYPROPYLENE GAS ENGINE DRIVEN PUMP UNITS DU BU25GHSP-P 2” Self Priming with 5.5 HP Honda GX200Engine

200

112

Included

2” FPT

55 lbs. 1084.06

1.6

1.0 Specific Gravity Pumps for Water Only; Use 1.3 & Higher Specific Gravity Pumps for Fertilizer & Other Heavy Liquids.

NEXT GENERATION PUMP REPAIR KITS BU 116248 Seal, Gasket & O-Ring Repair Kit for 3” & 4” X 3”.................................................................................................................... BU 116249 Seal, Gasket & O-Ring Repair Kit for 2” Self-Priming Cast Iron Pump...................................................................................... BU 116403-91 Seal, Gasket & O-Ring Repair Kit for 2” Self-Priming Poly Pump.............................................................................................

$ 155.44 158.12 201.00

IND

DULTMEIER SALES • OMAHA, NE

(800) 228-9666

•

www.dultmeier.com

• DAVENPORT, IA

(800) 553-6975

E1140

Centrifugal Transfer Pumps

120

- Plant Pumps -

All iron centrifugal pumps from Goulds for transfer of a wide variety of Liquid Solutions. High capacity pumps in 4" x 3" or 6" x 4" sizes with Silicon Carbide/Viton® Mechanical Seals are an ideal choice for fertilizer and chemical transfer. Standard Features Include: Back Pull-Out Design to reduce maintenance down time. • Silicon Carbide/Viton® Mechanical Seals for added durability and corrosion resistance. • Replaceable Wear Components including 316SS stainless steel shaft sleeve, casing and hub wear rings. • Enclosed Impeller design with dynamic balancing. • 125# ANSI Flanges on suction and discharge for piping versatility. • 4 x 3 sizes will pass up to 3/8" solids, 6 x 4 sizes will pass up to 7/16" solids. • Shaft size is 1-5/8" on all models. • Grease lube bearings. • All pumps are rated to 1750 rpm for longer seal and bearing life and improved performance on longer suction piping. All iron construction. 212° F. maximum temperature. PUMPS ONLY - Run at 1750 RPM Part No. Flanged Ports Flow @ 25PSI Impeller Wt. GL 12AIFRMD4 4 x 3 440 GPM 8-5/8" 180 Lbs. GL 12AIFRMC4 4 x 3 500 GPM 9” 180 Lbs. GL 12AIFRMA4 4 x 3 630 GPM 10-1/16" 180 Lbs. GL 14AIFRME4 4 x 3 770 GPM 11-3/4" 255 Lbs. GL 14AIFRMC4 4 x 3 840 GPM 12-5/16" 255 Lbs. GL 15AIFRMK4 6 x 4 820 GPM 9-7/8" 235 Lbs. GL 15AIFRMJ4 6 x 4 900 GPM 10-1/4" 235 Lbs. GL 15AIFRMF4 6 x 4 1100 GPM 11-1/16" 235 Lbs. GL 15AIFRMD4 6 x 4 1230 GPM 11-7/8" 235 Lbs. GL 10K45 Replacement Viton®, Carbon, Ceramic Seal for All Above Pumps..... GL 10K65 Replacement Silicon Carbide/Viton®, Severe Duty Seal................... GL 5K74 Buna Casing O-Ring for 12AI Pumps....................................... GL 5K199 Buna Casing O-Ring for 14 & 15AI Pumps.............................. Goulds Pump/Motor Units feature the frame mounted Goulds Pumps shown below mounted with S-Flex coupling assemblies and 3-phase TEFC motors. All units are assembled and properly aligned prior to shipping. SAE mounts and close-coupled versions also available.

RETAIL $ 3963.72 3963.72 3963.72 4842.76 4846.78 5364.02 5364.02 5360.00 5303.72 344.38 560.12 25.33 28.54

PUMP/MOTOR Units (4" x 3") - 1750 RPM

Max. Flanged Specific Flow @ Max. *Motor Wt. Part No. Ports Gravity 25PSI Flow 3PH Lbs. RETAIL DU GL12D-10 4 x 3 1.0 440 GPM 630 GPM 10 HP 535 $ 6402.52 DU GL12D-15 4 x 3 1.4 500 GPM 670 GPM 15 HP 660 6963.98 DU GL12A-15 4 x 3 1.0 630 GPM 730 GPM 15 HP 660 7084.58 DU GL12A-20 4 x 3 1.4 630 GPM 730 GPM 20 HP 700 7407.52 DU GL14E-25 4 x 3 1.0 770 GPM 810 GPM 25 HP 800 8825.24 DU GL14E-25A 4 x 3 1.4 680 GPM 775 GPM 25 HP 800 9065.10 DU GL14C-30 4 x 3 1.0 840 GPM 855 GPM 30 HP 850 9621.20 DU GL14E-30 4 x 3 1.4 770 GPM 810 GPM 30 HP 850 9392.06 DU GL14F-30 4 x 3 1.5 720 GPM 780 GPM 30 HP 850 6580.74 DU GL14C-40 4 x 3 1.4 840 GPM 855 GPM 40 HP 950 10435.92 *U se pumps with 1.4 S.G. for heavy or viscous products such as fertilizers, brines, etc.

PUMP/MOTOR Units (6" x 4") - 1750 RPM

Max. Max. Flanged Flow @ Flow Specific *Motor Wt. Part No. Ports 25 PSI GPM Gravity 3Phase Lbs. RETAIL DU GL15K-20 6 x 4 820 GPM 1000 1.0 20 HP 750 $ 8898.94 DU GL15K-25 6 x 4 820 GPM 1000 1.4 25 HP 830 9377.32 DU GL15J-25 6 x 4 900 GPM 1060 1.0 25 HP 830 9508.64 DU GL15J-30 6 x 4 900 GPM 1060 1.4 30 HP 900 9799.42 DU GL15F-30 6 x 4 1100 GPM 1180 1.0 30 HP 900 9911.98 DU GL15F-40 6 x 4 1100 GPM 1180 1.4 40 HP 980 10787.00 DU GL15D-40 6 x 4 1230 GPM 1280 1.0 40 HP 980 10957.18 DU GL15D-50 6 x 4 1230 GPM 1280 1.4 50 HP 1070 11557.50 * Use pumps with 1.4 S.G. for heavy or viscous products such as fertilizers, brines, etc.

GL14C-40

Viton® is a registered trademark of DuPont Performance Elastomers

Vertiflo Close-Coupled Centrifugal Pump Units Features: Available in All Iron, 316SS or all 316SS • Carbon/Ceramic/Viton® seals are standard (Silicon-carbide available) • Semi-open impellers • Back pull out design • Pump volute, impeller and mounting bracket are heavy cast metal • FPT Ports. Baseplates are available.

Series 1312 Industrial Horizontal, Close-Coupled, End Suction Pumps

Max. Spec. Max. GPM Impeller Part No. Series Ports Mat’l HP Phase Gravity Volts GPM 20 PSI Dia. RETAIL VF 1312-51 1312 2" x 1.5” C.I. 5 1 1.6 115/230 190 155 5-1/8" $ 2929.24 VF 1312-53 1312 2” x 1.5” C.I. 5 3 1.6 115/230 190 155 5-1/8" 2336.96 VF 1312-51-SS 1312 2” x 1.5” 316SS 5 1 1.6 230 190 155 5-1/8” 3973.10 VF 1312-53-SS 1312 2” x 1.5” 316SS 5 3 1.6 115/230 190 155 5-1/8” 3205.28 VF SJ-2112-C1-X0 Viton® Mechanical Seal Assembly.................................................................................. 74.37 VF 50-2825-01-61 Case Gasket.................................................................................................................... 20.90 Note: Water=8.33 lbs./Gal.=1.0 Specific Gravity

12 lb./gal. Material=1.4 S.G.

13.5 lb./gal. Material=1.6 S.G.

SHIPPING

SERVICE & REPAIRS Did you know? We can service almost every brand of pump we sell in our catalog.

Call us at 1-800-228-9666 (Omaha, NE) for a quote!

IND

DULTMEIER SALES • OMAHA, NE

(800) 228-9666

•

www.dultmeier.com

• DAVENPORT, IA

(800) 553-6975

E1135

Centrifugal Transfer Pumps

121

- Plant Pumps -

Vertiflo Double “Pressurized” Seal Centrifugal Pump Units

Vertiflo Double “Grease Lube” Seal Centrifugal Pump Units

These 1424 Series Vertiflo Centrifugal Pumps include Double Viton® Seals with pressurized seal fluid reservoirs (includes translucent reservoir, fill port, mounting bracket, pressure gauge, Schraeder air valve and tubing). The double seal feature provides extra protection including run-dry applications. Great for a wide variety of applications, including fertilizer, various chemicals, water, wastewater and deicing liquids. Run at 1750 RPM speeds for reduced wear while providing high flow rate and pressure capability. All iron construction. ANSI 150# ANSI flanged ports. Back pull-out design for easier maintenance. Heavy-duty solid 416SS shafts. Double grease lube bearings with zerk fittings. Semi-open impellers will pass 1-3/16” solids.

These Pump Units include same Vertiflo Double Seal Pumps, motors, couplings, guards and baseplates as noted at left but with Lubesite #205 Grease Lubricator Kit instead of pressurized seal. Flanged Flow at Part No. Ports 25 PSI DU VF4X3-20G 4 x 3 610 GPM DU VF5X4-25G 5 x 4 760 GPM DU VF6X4-40G 6 x 4 1125 GPM DU VF6X5-40G 6 x 5 1030 GPM DU VF6X6-40G 6 x 6 1125 GPM

Max. * Max. Motor Wt. Flow S.G. H.P. Lbs. RETAIL 660 GPM 1.33 20 HP 650 $ 7814.88 760 GPM 1.50 25 HP 725 8657.74 1125 GPM ** 1.43 40 HP 825 14099.48 1140 GPM 1.65 40 HP 850 10216.16 1725 GPM 1.50 40 HP 1050 10883.48

* S.G. = Specific Gravity (Weight of Product/Weight of Water); S.G. rated above at Flow at 25 PSI ** 1.43 S.G. at 600 GPM on this pump.

Pumps are long coupled on steel baseplates (powder coated) to Totally Enclosed Fan Cooled (TEFC) motors and include OSHA Approved “Orange Peel” poly coupling guards. Also available with optional stainless impellers or in all 316 stainless construction.

Vertiflo Double Seal Pumps Only Same 1424 Series Pumps used in pump units shown at left. All iron, heavy duty solid 416SS shafts, double grease bearings and double Viton® mechanical seals. 1-1/4” shaft diameter at coupling point.

Choose either pressurized seal barrier fluid reservoir (best choice) or Lubesite grease lubricator. Both sold separately. D

Flanged Flow at Max. Part No. Ports 25 PSI Flow * Max. S.G. DU VF4X3-20 4 x 3 600 GPM 660 GPM 1.38 at 600 GPM DU VF4X3-25 4 x 3 600 GPM 660 GPM 1.6 at 600 GPM DU VF5X4-25 5 x 4 760 GPM 760 GPM 1.5 at 760 GPM DU VF6X4-30 6 x 4 † 900 GPM 925 GPM 1.42 at 600 GPM DU VF6X4-40 6 x 4 1123 GPM 1125 GPM 1.43 at 600 GPM DU VF6X4-50 6 x 4 † 1200 GPM 1200 GPM 1.4 at 750 GPM DU VF6X5-40 6 x 5 1130 GPM 1130 GPM 1.6 at 1000 GPM DU VF6X6-40 6 x 6 1300 GPM 1725 GPM 1.5 at 1000 GPM

Motor Wt. H.P. Lbs. 20 HP 675 25 HP 725 25 HP 750 30 HP 850 40 HP 950 50 HP 1050 40 HP 875 40 HP 1075

RETAIL $ 8622.90 9345.16 9448.34 13927.96 15092.42 16788.86 10974.60 11507.92

* S.G. = Specific Gravity (Weight of Product/Weight of Water). † Models are 1434 Series.

Crane Deming Centrifugal Pump Units with Double Viton® Seals These 4021 Series Standard Duty Pumps will handle a wide range of fluids. Standard construction is all iron, 10" impellers, double Viton® mechanical seal with Lubesite #205 grease lubricators. Pumps are base mounted to a 52" x 18" baseplate with Lovejoy S-Flex coupling drives. Motors are 1750 rpm/TEFC/3-Phase. These units have flanged ports and are designed to provide years of trouble-free service. Stainless impellers are available at additional cost. Maximum liquid temperature is 225° F.

CRANE

Part No. VF 4X3X10-DBL VF 5X4X10-DBL VF 6X4X11-DBL VF 6X5X10-DBL VF 6X6X10-DBL SC 118-000-236V DU PS-STAND DU LUBE-205KV VF 1V VF 1B VF 50 VF 50-2

Flanged Flow at Max. Wt. Ports 25 PSI Flow Lbs. 4 x 3 610 GPM 660 GPM 145 5 x 4 760 GPM 760 GPM 225 6 x 4 1125 GPM 1125 GPM 225 6 x 5 1030 GPM 1140 GPM 225 6 x 6 1125 GPM 1725 GPM 275 Pressurized Seal Barrier Fluid Reservoir Kit Less Brkt.... Steel Bracket for Above Reservoir............................. Lubesite #205 Grease Lubricator Kit......................... Double Viton® Seal Assembly.................................. Double BUNA Seal Assembly..................................... Casing Gasket............................................................ Stuffing Box Gasket...................................................

Same 4021 Standard Duty Pumps used in pump units shown at left. All iron, 1-1/4” S.S. shafts, Viton® double mechanical seals with Lubesite #205 grease lubricators. Run at 1750 RPM

RETAIL $ 4411.28 4680.62 8687.22 4841.42 5346.60 820.08 134.00 118.59 588.26 399.32 29.48 13.33

Crane Deming Double Seal Pumps CRANE

DEMING PUMPS

118-000-236V Pressurized Seal Fluid Reservoir

LUBE-205KV Lubesite #205 Grease Lubricator Kit

DEMING PUMPS ®

maximum.

Note: Not for Use with Inlet Pressure Above 25 PSI.

* For fertilizer and other heavy liquids, use pumps shown with S.G. of 1.33 or (1.0 S.G. for water GPM higher. only).

Max. *Max. Wt. Part No. Pump Unit Size HP Flow S.G. Lbs. DU CD3M-15 3M Deming 4 X 3 15 620 1.00 585 DU CD3M-20 3M Deming 4 X 3 20 620 1.33 635 DU CD4M-20 4M Deming 5 X 4 20 900 1.00 665 DU CD4M-25 4M Deming 5 X 4 25 900 1.33 715 DU CD4M-30 4M Deming 5 X 4 30 900 1.60 780 DU CD5M-25 5M Deming 6 X 5 25 1300 1.00 765 DU CD5M-30 5M Deming 6 X 5 30 1300 1.33 805 DU CD5M-40 5M Deming 6 X 5 40 1300 1.60 845 DU CD6M-30 6M Deming 6 X 6 30 1600 1.20 820 DU CD6M-40 6M Deming 6 X 6 40 1700 1.50 1020

Part No. Pump Style

RETAIL $ 8959.24 9438.96 9985.68 10555.18 11143.44 10965.22 11690.16 12880.08 12870.70 14096.80

Wt.

RETAIL

PW 3M 4” x 3” Flanged 145 lbs. $ 5942.90 PW 4M 5” x 4” Flanged 225 lbs. 6378.40 PW 5M 6” x 5” Flanged 225 lbs. 6791.12 PW 6M 6” x 6” Flanged 275 lbs. 7497.30 PW 118930 Double Viton® Seal................... 659.28 PW 0030899 Double Buna Seal..................... 238.52 PW 0004474 Suction Cover Gasket............... 21.57 SC 118-000-236 Pressure Seal Assembly........... 793.28 DU LUBE-205K Lubesite #205 Grease Lube Kit 117.92 Elastomers Viton® is a registered trademark of DuPont Performance

IND

DULTMEIER SALES • OMAHA, NE

(800) 228-9666

•

www.dultmeier.com

• DAVENPORT, IA

(800) 553-6975

E0224

122

VERTIFLO Centrifugal Transfer Pumps - Plant Pumps -

Vertiflo Cast Iron Centrifugal Pump Units

Vertiflo Cast Iron Centrifugal Pumps Only

with Single Viton® Seals

These 1424 Series Vertiflo Centrifugal Pumps include Single Viton® Seals. Great for a wide variety of applications, including fertilizer, various chemicals, water, wastewater and deicing liquids. Run at 1750 RPM speeds for reduced wear while providing high flow rate and pressure capability. All iron construction. ANSI 150# ANSI flanged ports. Back pull-out design and external impeller adjustment for easier maintenance. Heavy-duty solid 416SS shafts. Double grease lube bearings with zerk fittings. Semi-open impellers will pass 1-3/16” solids. Pumps are long coupled on steel baseplates (powder coated) to Totally Enclosed Fan Cooled (TEFC) motors and include OSHA Approved “Orange Peel” poly coupling guards. Also available with optional stainless impellers.

Same 1424 Series Pumps used in pump units shown at left. All iron bodies, heavy duty solid 416SS shafts, double grease bearings and single Viton®

mechanical seals. 1-1/4” shaft diameter at coupling point.

Part No. VF 4X3X10-SGL VF 5X4X10-SGL VF 6X5X10-SGL VF 6X6X10-SGL VF 1V-SINGLE VF 1B-SINGLE VF 50 VF 50-2

Flanged Flow at Max. Part No. Ports 25 PSI Flow DU VF4X3-20-SGL 4 x 3 600 GPM 660 GPM DU VF5X4-25-SGL 5 x 4 760 GPM 760 GPM DU VF6X5-30-SGL 6 x 5 1120 GPM 1130 GPM DU VF6X5-40-SGL 6 x 5 1120 GPM 1130 GPM DU VF6X6-40-SGL 6 x 6 1300 GPM 1725 GPM

* Max. S.G. 1.38 at 600 GPM 1.5 at 760 GPM 1.38 at 750 GPM 1.6 at 1000 GPM 1.5 at 1000 GPM

Flanged Flow at Max. Wt. Ports 25 PSI Flow Lbs. 4 x 3 610 GPM 660 GPM 145 5 x 4 760 GPM 760 GPM 225 6 x 5 1030 GPM 1140 GPM 250 6 x 6 1125 GPM 1725 GPM 275 Single Viton® Seal Assembly.................................... Single BUNA Seal Assembly...................................... Casing Gasket............................................................ Stuffing Box Gasket...................................................

RETAIL $ 4107.10 4365.72 4535.90 5110.76 292.12 203.68 29.48 13.33

Vertiflo 316 Stainless Centrifugal Pumps Only

Motor Wt. H.P. Lbs. RETAIL 20 HP 675 $ 7743.86 25 HP 750 8538.48 30 HP 825 6409.22 40 HP 875 10201.42 40 HP 950 10849.98

with Single Viton® Seals Same Stainless 1424 Series Pumps used in pump units

* S.G. = Specific Gravity (Weight of Product/Weight of Water).

shown at left. 316 Stainless wet ends (cast iron bearing

Vertiflo 316 Stainless Centrifugal Pump Units

pedestals), double grease D

bearings and single Viton®

with Single Viton® Seals

mechanical seals. 1-1/4” shaft diameter at coupling point.

These Stainless 1424 Series Vertiflo Centrifugal Pumps include Single Viton® Seals. Great for a wide variety of applications, including fertilizer, various chemicals, water, wastewater and deicing liquids. Run at 1750 RPM speeds for reduced wear while providing high flow rate and pressure capability. Construction is 316 stainless wet end. ANSI 150# ANSI flanged ports. Back pull-out design and external impeller adjustment for easier maintenance. Heavy-duty solid 416SS shafts. Double grease lube bearings with zerk fittings. Semi-open impellers will pass 1-3/16” solids.

ANSI 150# flanged ports.

Flanged Flow at Max. Wt. Part No. Ports 25 PSI Flow Lbs. VF 4X3X10-SGL-SS 4 x 3 610 GPM 660 GPM 160 VF 5X4X10-SGL-SS 5 x 4 760 GPM 760 GPM 245 VF 6X5X10-SGL-SS 6 x 5 1030 GPM 1140 GPM 275 VF 6X6X10-SGL-SS 6 x 6 1125 GPM 1725 GPM 300 VF 1V-SINGLE Single Viton® Seal Assembly.................................... VF 1B-SINGLE Single BUNA Seal Assembly...................................... VF 50 Casing Gasket............................................................ VF 50-2 Stuffing Box Gasket...................................................

Pumps are long coupled on steel baseplates (powder coated) to Totally Enclosed Fan Cooled (TEFC) motors and include OSHA Approved “Orange Peel” poly coupling guards.

RETAIL $ 9960.22 11662.02 12156.48 12888.12 292.12 203.68 29.48 13.33

We now have our Catalogs as well as Parts Schematics online! D

Flanged Flow at Max. Part No. Ports 25 PSI Flow DU VF4X3-20-SGL-SS 4 x 3 600 GPM 660 GPM DU VF5X4-25-SGL-SS 5 x 4 760 GPM 760 GPM DU VF6X5-30-SGL-SS 6 x 5 1120 GPM 1130 GPM DU VF6X5-40-SGL-SS 6 x 5 1120 GPM 1130 GPM DU VF6X6-40-SGL-SS 6 x 6 1300 GPM 1725 GPM

* Max. S.G. 1.38 at 600 GPM 1.5 at 760 GPM 1.38 at 750 GPM 1.6 at 1000 GPM 1.5 at 1000 GPM

Motor Wt. H.P. Lbs. RETAIL 20 HP 675 $ 13800.66 25 HP 750 16120.20 30 HP 825 14510.86 40 HP 875 18032.38 40 HP 950 18831.02

www.dultmeier.com

* S.G. = Specific Gravity (Weight of Product/Weight of Water). Viton® is a registered trademark of DuPont Performance Elastomers

DULTMEIER SALES • OMAHA, NE

(800) 228-9666

•

www.dultmeier.com

• DAVENPORT, IA

(800) 553-6975

E1214

Scot Centrifugal Transfer Pumps

123

- Plant Pumps -

Scot 57 Series - 4x3

TOTAL HEAD PERFORMANCE CURVE VARIABLE MTRS PSI FEET NUMBER 40.000.530 SPEED

1.0 S.G. 70˚F

Straight Centrifugal Pedestal Base

PUMP 57 PUMP SIZE: 4.0 X 3.0 X 6.9 IMP. TYPE: ENCLOSED MAX. DIA.: 6.88 IMPELLER NO.: 57 MAX. SPHERE: 3/4

MAX HP FOR 6.88" DIA IMPELLER RPM MAX HP 3500 30.0 3000 19.0 2500 10.8 2000 5.7 1500 2.4

3500 RPM • Cast Iron D

FP57-25

U.S GALLONS PER MINUTE CUBIC METERS PER HOUR

4" Flanged Inlet 3" Flanged Discharge

FEATURES: 4" x 3" Flanged Connections • All Iron Construction • Viton® Mechanical Seal • Stainless Shaft Sleeve • 1-3/8" Shaft • Available as a Bare Pump or Base Mounted Unit with TEFC 3-Phase Motors • A Heavy Duty Pump for Plant Use.

Max. Wt. Part No. S.G. Imp. Lbs.

RETAIL

SC FP57 *Pedestal Base Pump Only — 5-7/8" 190 $ 3855.18 DU FP57-20 4X3 20 HP Scot Pump Unit 1.33 5-1/4" 520 7659.44 DU FP57-25 4X3 25 HP Scot Pump Unit 1.33 5-7/8" 640 8169.98 DU FP57-30 4X3 30 HP Scot Pump Unit 1.5 5-7/8" 770 9283.52 DU FP57-40 4X3 40 HP Scot Pump Unit 1.33 6-1/2" 840 5506.06

VITON® Seal: 101-000-191. VITON® Repair Kit 57 Pumps: 118-000-383A * Other impeller sizes are available.

FP57

Scot FPS56 / 556 Series

TOTAL HEAD MTRS PSI FEET

PERFORMANCE CURVE VARIABLE NUMBER 40.000.529 SPEED

1.0 S.G. 70˚F

4x3 & 3x3 Flanged and FPT Pump Units for Plant Use 3500 RPM • Cast Iron FEATURES: All Iron Construction • Cast Iron Bearing Flange • Double Sealed Ball Bearings • Viton® Mechanical Seal • Stainless Shaft Sleeve & Hardware • Severe Duty Seal Option • Available as Bare Pump or Base Mounted with TEFC 3-Phase Motor & LoveJoy S Flex Drive.

PUMP 56,56F PUMP SIZE: 3.0 X 3.0 X 6.5 IMP. TYPE: ENCLOSED MAX. DIA.: 6.50 IMPELLER NO.: C1159 MAX. SPHERE: 1/2

MAX HP FOR 6.5" DIA IMPELLER RPM MAX HP 3500 30.0 3000 19.0 2500 10.8 2000 5.7 1500 2.4

U.S GALLONS PER MINUTE CUBIC METERS PER HOUR

FPS56FA

Max. Use with 3500 RPM Part No. Pump Size Shaft Size Flow Max. S.G. Imp. Motor for S.G.** Shown: RETAIL SC FPS556A * 4" x 3" FPT 1-1/8" 500 — 5-1/4" 15 HP (1.36 S.G.) $ 1479.36 SC FPS56FA * 3" x 3" Flanged 1-1/8" 500 — 5-1/4" 15 HP (1.36 S.G.) 1504.82 SC FPS56FB * 3” x 3” Flanged 1-1/8” 540 — 5-1/2” 20 HP (1.43 S.G.) 1504.82 SC FPS56FC * 3” x 3” Flanged 1-1/8” 560 — 5-7/8” 25 HP (1.33 S.G.) 1504.82 SC FPS56F * 3” x 3” Flanged 1-1/8” 600 — 6-1/2” 40 HP (1.45 S.G.) 1503.48 DU FP56-15 4"x3" FPT, 15 HP, 3-Ph. Pump Unit 1.36 5-1/4" Motor Included 4588.16 DU FP56F-15 3"x3" Flanged, 15 HP, 3-Ph, Pump Unit 1.36 5-1/4" Motor Included 4665.88 DU FP56F-20 3"x3" Flanged, 20 HP, 3-Ph, Pump Unit 1.33 5-1/2" Motor Included 4928.52 DU FP56F-25 3"x3" Flanged, 25 HP, 3-Ph, Pump Unit 1.33 5-7/8" Motor Included 5648.10 DU FP56F-25A 3”x3” Flanged, 25 HP, 3-Ph, Pump Unit † 1.70 5-1/2” Motor Included 5692.32 DU FP56-25 4"x3" FPT, 25 HP, 3-Ph, Pump Unit 1.33 5-7/8" Motor Included 5719.12

FP56F Series

* Pump Only. VITON® Seal: 101-000-191 Viton® Repair Kit 56 Pumps: 118-000-344A ** S.G. = Lbs./Gal. of Liquid÷8.34 † Use FP56F-25A for 10-34-0 & other extra heavy fertilizer grades.

Scot 95 / 96 Series

TOTAL HEAD MTRS PSI FEET

PERFORMANCE CURVE 1750 RPM 1750 RPM NUMBER 40.000.321

1.0 S.G. 70˚F

60 Hz

Straight Centrifugal Pumps - 6x4 & 6x5

PUMP 95 PUMP SIZE: 6.0 X 4.0 X 10.0 IMP. TYPE: ENCLOSED MAX. DIA.: 10.25 IMPELLER NO.: 95 MAX. SPHERE: 7/8

STD. IMPELLERS FOR ODP MOTORS H.P. DIA. 15.0 8.90 20.0 9.38 25.0 10.25

1750 RPM • Cast Iron FEATURES: 6” x 4" and 6” x 5" Flanged Ports • All Iron Construction • Cast Bearing Frame • Double Sealed Ball Bearings • Stainless Sleeves • Viton® Seal (severe duty seals available) • 1-3/8" Shaft • 10.25 Impeller • 1750 RPM.

U.S GALLONS PER MINUTE CUBIC METERS PER HOUR

TOTAL HEAD

FP95-40

MTRS PSI FEET

PERFORMANCE CURVE 1750 RPM 1750 RPM NUMBER 40.000.322

IND

IMP. TYPE: MAX. DIA.: IMPELLER NO.: MAX. SPHERE:

ENCLOSED 10.25 96 1-1/4

STD. IMPELLERS FOR ODP MOTORS H.P. DIA. 15.0 8.50 20.0 8.90

FP 96 Part No.

Description

SC FP95 SC FP96 DU FP95-40 DU FP96-40

6X4 Pedestal Pump ONLY........................... 286 lbs. $ 4710.10 6X5 Pedestal Pump ONLY .......................... 320 lbs. 4668.56 6X4 Flanged - 40 HP Pump, 1.50 Max. S.G. 1005 lbs. 10644.96 6X5 Flanged - 40 HP Pump, 1.33 Max. S.G. 1020 lbs. 10793.70

PUMP 96

1.0 S.G. 70˚F PUMP SIZE: 6.0 X 5.0 X 10.0

60 Hz

Wt.

25.0 9.38 30.0 10.25

RETAIL

U.S GALLONS PER MINUTE CUBIC METERS PER HOUR

Viton® is a registered trademark of DuPont Performance Elastomers

DULTMEIER SALES • OMAHA, NE

(800) 228-9666

•

www.dultmeier.com

• DAVENPORT, IA

(800) 553-6975

E0223

Scot Centrifugal Transfer Pumps

124

Straight Centrifugal C.I. Pedestal Pumps

Long-Coupled Scot C.I. Centrifugal Pumps Straight & Self-Priming Double sealed bearings • Viton® mechanical seals • Stainless shaft sleeves • All iron construction with FPT ports • Base mounted • Longcoupled with Lovejoy coupling drives • TEFC motors.

2” & 3” Sizes Excellent pumps for fertilizer, agchemical, diesel fuel and many other liquids. Direct couple or belt drive these pumps to electric motors and gas engines (run at 3500 RPM). All iron construction, FPT ports, stainless shaft sleeves and Viton® mechanical seals.

For Larger Sizes See Next Page

SC3320 Self-Priming D

Max. GPM HP Required Wt. Part No. Ports Impeller GPM @ 20 PSI @ 1.33 S.G. Lbs. RETAIL SC FPH61 2” x 2” 4.38” 120 90 3 HP 27 $ 511.88 SC FPD517 2” x 2” 4.88” 165 145 5 HP 55 1139.00 SC FPD515A 3” x 3” 5.13” 365 315 10 HP 62 1160.44 SC FPD515 3” x 3” 5.63” 390 360 15 HP 62 1160.44

Max. Max. Specific Flow Wt. Part No. Ports (FPT) Gravity GPM Motor Lbs. RETAIL SC FPH61A 2 x 2 Straight 1.4 120 3HP 3PH 80 $ 1877.34 DU SC3320 2 x 2 Self-Priming 1.4 135 3HP 3PH 120 1961.76 SC FPH61B 2 x 2 Straight 1.7 120 5HP 3PH 105 1993.92 DU FPD517-5 2 x 2 Straight 1.4 170 5HP 1PH 120 2882.34 DU FPD517-53 2 x 2 Straight 1.4 170 5HP 3PH 120 2643.82 DU FPD517-73 2 x 2 Straight 1.5 210 7.5HP 3PH 175 2926.56 DU SC515A 3 x 3 Straight 1.0 365 7.5HP 3PH 250 3033.76 DU SC515B 3 x 3 Straight 1.33 365 10HP 3PH 300 3132.92 DU SC1032 3 x 3 Straight 1.0 380 10HP 1PH 300 4108.44 DU SC1034 3 x 3 Straight 1.0 380 10HP 3PH 300 3453.18 DU SC7531 3 x 3 Self-Priming 1.0 375 10HP 1PH 360 4968.72 DU SC7533 3 x 3 Self-Priming 1.0 375 10HP 3PH 390 3939.60 DU SC1035 3 x 3 Straight 1.5 390 15HP 3PH 450 4164.72 DU SC1033 3 x 3 Self-Priming 1.4 375 15HP 3PH 540 4742.26

Close-Coupled SCOT Motor Pumps for D

• Blending • Mixing

LFE215

Features: All Iron Construction • Viton® Mechanical Seal • Single & Three Phase TEFC Close-Coupled Motors • Explosion Proof & Severe Duty Seals Available • Stainless Shaft or Shaft Sleeve. Note: All Pumps Shown are Straight Centrifugal with FPT ports. Other sizes are available. Use 1.33 or higher S.G. For fertilizer and other heavy liquids (1.0 S.G. for water only). Max. Max. Specific Flow Part No. Ports (FPT) Gravity GPM HP PH. DU SC234C 1" x 3/4" 1.0 35 3/4 1 SC LFE213A 1-1/4" x 1" 1.37 53 1-1/2 1 SC LFE213B 1-1/4" x 1" 1.0 57 1-1/2 3 SC LFE251A 1-1/2" x 1-1/2" 1.0 125 2 1 SC LFE251 1-1/2" x 1-1/2" 1.4 125 3 3 SC LFE261A 2" x 2" 1.4 150 3 3 SC LFE261B 2” x 2” 1.5 150 3 1 SC LFE217 2" x 2" 1.4 180 5 3 SC LFE219 2-1/2" x 2" 1.0 225 5 3 SC LFE219A 2-1/2" x 2" 1.2 225 7-1/2 3 SC LFE215R100P2 3" x 3" 1.0 400 10 3 SC LFE215R150P2 3" x 3" 1.4 400 15 3 SC LFE256A 4” x 3” 1.5 520 20 3

Self-Priming Pedestal Pumps 2" & 3" Models • All Iron Construction • Double Sealed Ball Bearings • Stainless Shaft Sleeve • Viton® Mechanical Seals • Severe Duty Seals Available

Wt. Lbs. RETAIL 25 $ 893.78 55 974.18 50 1136.32 75 1021.08 95 1061.28 75 1069.32 95 1203.32 105 2044.84 105 1889.40 121 2039.48 160 2688.04 180 2946.66 325 4551.98

1-1/2 X 1-1/2", 2 X 2" 125 GPM - 3500 RPM

FPH74ASP 2" FPT Ports

FPS575 3" FPT Ports

Cast Iron with TEFC Motor Drive & Viton® Seal Model No.

Part No.

Note: Use 1.4 S.G. pump for fertilizer and other heavy liquids.

FFE274P-1 GPM 75 50 25 0 SC233C

PSI 10 20 25 30 GPM 128 95 65 32

Max. Spec. Part No. Ports HP Phase Voltage Gravity PUMP UNITS: SC FFE274P-1 2” 1.5 1 115/208-230 1.0 Scot Close Cpled SC FFE274P-2 2” 2 1 115/230 1.4 Scot Close Cpled DU SC233C 2" 3 3 230/460 1.4 Scot Close Cpled DULTMEIER SALES • OMAHA, NE

Part No.

Wt. RETAIL 75 lbs. $ 940.68 67 lbs. 948.72 85 lbs. 1010.36

(800) 228-9666

Seals

Wt.

RETAIL

SCOT Replacement Mechanical Seals for Above Scot Pumps

Viton® is a registered trademark of DuPont Performance Elastomers

IND

Ports

U.S. GALLONS PER MINUTE PUMPING CLEAR LIQUID 1.0 SPECIFIC GRAVITY

SC FPH74ASP 2" 3/4" 37 lbs. $ 601.66 SC FPS575 3" 1-1/2" 147 lbs. 1763.44 SC FPH74SD 2” * 3/4” 37 lbs. 808.02 * With severe duty seal (Silicon Carbide, Viton®)

PERFORMANCE DATA PSI 10 20 25 30

All Iron Construction • FPT Ports

U.S. GALLONS PER MINUTE PUMPING CLEAR LIQUID 1.0 SPECIFIC GRAVITY

3" 350 GPM

Close-Coupled Self-Priming Pump Units D

TOTAL HEAD IN FEET

• Transfer

Use 1.33 or higher S.G. for fertilizer and other heavy liquids. (1.0 S.G. pump for water only).

Straight Centrifugal

TOTAL HEAD IN FEET

•

Size

Elastomer

RETAIL

SC 101-000-115C * 3/4" Viton® / SC $ 278.72 SC 101-000-102 3/4" Buna-N 43.55 ® SC 101-000-115 3/4" Viton 54.54 SC 101-000-168 1-1/2" Buna-N 101.17 ® SC 101-000-191 1-1/2" Viton 119.26 * With severe duty seal (Silicon Carbide, Viton®)

www.dultmeier.com

• DAVENPORT, IA

(800) 553-6975

E0227

Stainless Centrifugal Transfer Pumps

125

316 Stainless Investment Cast Centrifugal Pumps 316 Stainless Investment Pumps are superior to stamped stainless pumps and are an excellent choice for chemical and fertilizer transfer, pure water feed, water reclaim and treatment, condensate return, pharmaceutical and food/beverage (Non FDA). Standard Features Include: Precision Investment Cast 316 Stainless liquid end components (Casing, Impeller, Seal Housing, Shaft Sleeve). • Rugged Cast Iron bearing frames and adapters. • Back Pullout Design for quick maintenance. • Open Impeller Design pass 3/8” solids. • Viton® Mechanical Seals (carbon, ceramic, Viton®). • Rugged TEFC Motors, continuous duty (3500 RPM; Explosion-proof motors available). • Some units sized for Heavier Chemicals. (See S.G. rating below). Many Models Available!

4SS Pedestal Model D

1SS Close-Coupled Model * S.G. = wt. Liquid (Lbs./Gal.) 8.34

1SS Series; FPT Ports; Close-Coupled TEFC Motors:

Maximum Maximum * Max. Part No. Flow PSI Shown S.G. GL 1SS1H4F0 72 GPM 50 GPM @ 34 PSI 1.5 GL 1SS1H5F0 72 GPM 50 GPM @ 34 PSI 1.5

Motor Inlet x Outlet Voltage 3 HP, 1 PH 1-1/4” x 1” 208-230V 3 HP, 3 PH 1-1/4” x 1” 230-460V

3SS & 4SS Series; Flanged Ports; Close-Coupled TEFC Motors:

Part No. GL 3SS1J4A0 GL 3SS1J5A0 GL 4SS1M5E0 GL 4SS1N9C0

Maximum Maximum * Max. Flow PSI Shown S.G. 192 GPM 150 GPM @ 43 PSI 1.00 192 GPM 150 GPM @ 43 PSI 1.00 390 GPM 300 GPM @ 35 PSI 1.50 460 GPM 425 GPM @ 35 PSI 1.33

Motor 5 HP, 1 PH 5 HP, 3 PH 15 HP, 3 PH 20 HP, 3 PH

Inlet x Outlet Voltage 2” x 1-1/2” 230V 2” x 1-1/2” 230-460V 3” x 2” 230-460V 3” x 2” 230-460V

3SS & 4SS Series; Pedestal Pumps for Long-Coupling to Motors:

Maximum Part No. Flow GL 3SSFRMA0 192 GPM GL 4SSFRME0 395 GPM GL 4SSFRMC0 460 GPM GL 4SSFRMA0 525 GPM

Maximum Use 3500 RPM PSI Shown Motor for S.G. Inlet x Outlet 170 GPM @ 35 PSI 7.5 HP for 1.38 S.G. 2” x 1-1/2” Flange 300 GPM @ 35 PSI 15 HP for 1.50 S.G. 3” x 2” Flange 425 GPM @ 35 PSI 20 HP for 1.33 S.G. 3” x 2” Flange 480 GPM @ 35 PSI 25 HP for 1.25 S.G. - 30 HP for 1.50 S.G. 3” x 2” Flange

Wt. RETAIL 68 lbs. $ 3415.66 71 lbs. 3585.84

Wt. RETAIL 120 lbs. $ 5721.80 120 lbs. 4317.48 225 lbs. 6143.90 300 lbs. 6784.42

Wt. RETAIL 130 lbs. $ 5042.42 100 lbs. 5910.74 216 lbs. 5912.08 410 lbs. 5910.74

SSH 316L Stainless Pumps Close-Coupled 316L Stainless Pump Units are used in many applications including water transfer, pressure boosting, fertilizer transfer, selected chemical transfer and other applications. Standard Features: • 316L Stainless casings, impellers & other wetted components for corrosion resistance. • Cast iron power frames for strength & durability. • Back pull-out design for quick maintenance. * S.G. = Lbs./Gal.) 8.34 Lbs/Gal (Water) • Totally enclosed, fan cooled motors (TEFC). • Standard 150 lb. ANSI flanges. D

• Severe duty Viton® mechanical seals (silicon-carbide, carbon, Viton®) • Pedestal pumps also available for long-coupling to motors.

Many Models are Available Part No. Ports GL 5SH1J32G0 2-1/2” x 2” GL 5SH2J52G0 2-1/2” x 2” GL 5SH2M52C0 2-1/2” x 2” GL 5SH2N52B0 2-1/2” x 2” GL 23SH2P52K0 4” x 3”

Maximum GPM 308 308 375 410 850

– Call with Your Flow Rate Requirements!

GPM @ * Maximum Flow Shown S.G. Motor Voltage Wt. RETAIL 200 @ 25 PSI 1.00 5 HP, 1 Phase 230V 130 lbs. $ 4346.96 200 @ 25 PSI 1.00 5 HP, 3 Phase 208-230/460V 100 lbs. 3348.66 300 @ 37 PSI 1.36 15 HP, 3 Phase 208-230/460V 216 lbs. 4949.96 350 @ 44 PSI 1.42 20 HP, 3 Phase 208-230/460V 291 lbs. 5397.52 500 @ 50 PSI 1.25 25 HP, 3 Phase 208-230/460V 410 lbs. 8789.06 Viton® is a registered trademark of DuPont Performance Elastomers

IND

DULTMEIER SALES • OMAHA, NE

(800) 228-9666

•

www.dultmeier.com

• DAVENPORT, IA

(800) 553-6975

E0870

126

Scot Stainless Steel Centrifugal Pumps Stainless Steel Centrifugal Pumps

Scot Pumps Stamped Stainless Steel Centrifugal Pumps can be used in an extremely wide and diverse array of applications. The possibilities are near endless for this pump line. Scot Pumps offer some of the highest quality stainless steel centrifugal pumps on the market. If you need added corrosion-resistance or simply want a top quality pump — don’t look any further than Scot Pumps.

Motorpump 230

230

Motor Frame: J56 Motor Options: ODP, TEFC, Explosion-Proof Motor RPM: 3500 Inlet/Outlet: 1-1/4” x 3/4” FPT Seal: Type 21 Mechanical Seal

HP Options: 1/2 - 3/4 Max. Flow: 45 GPM Max. PSI: 32 Metallurgy: 304SS Impeller Type: Enclosed

Motor Voltage: 208-230/460V, 200V, 575V

Motor Hertz: 60

Max. Part No. Seal Impeller HP Phase S.G. GPM Volts RETAIL SC 3426K115 Viton®-Carbon/Sil-Carbide 4.0” 1/2 3 1.0 35 208-230/460 $903.16 SC 3426K153 Viton®-Carbon/Sil-Carbide 4.5” 3/4 3 1.0 45 208-230/460 903.16 SC 3426K127 Viton®-Carbon/Sil-Carbide 4.0” 1/2 1 1.0 35 115/230 879.04 SC 3426K139 Viton®-Carbon/Sil-Carbide 4.5” 3/4 1 1.0 45 115/230 917.90

Common Repair Kits: Part No. SC 118-000-618D SC 118-000-618D1

Description RETAIL MP230 Repair Kit for J56 Frame, 3 Phase Motor......................................................... $ 139.03 MP230 Repair Kit for J56 Frame, 1 Phase Motor......................................................... 133.33

Motorpump 231

231

Motor Frame: J56 Motor Options: ODP, TEFC, Explosion-Proof Motor RPM: 3500 or 1750 Inlet/Outlet: 1-1/4” x 1” FPT Seal: Type 21 Mechanical Seal

Part No. Port SC 3377K196WPE 1.25” x 1” SC 3377K479 1.25” x 1” SC 3377K147WPE 1.25” x 1” SC 3377K254WPE 1.25” x 1” SC 3377K392WPE 1.25” x 1” SC 3377K572WPE 1.25” x 1”

Motor Frame J56 J56 J56 J56 J56 J56

HP Options: 1/2 - 5 Max. Flow: 75 GPM Max. PSI: 65 Metallurgy: 304SS Impeller Type: Enclosed

Motor Type RPM Seal Impeller HP/PH † S.G. GPM TEFC 3500 VN/Sil/Carb 4.88” 1HP / 3PH 1.00 52 TEFC 3500 VN/Sil/Carb 4.50” 1HP / 1PH 1.25 45 TEFC 3500 VN/Sil/Carb 6.30” 3HP / 3PH 1.00 72 TEFC 3500 VN/Sil/Carb 4.88” 1.5HP / 3PH 1.25 52 TEFC 3500 VN/Sil/Carb 5.25” 2HP / 3PH 1.25 62 TEFC 3500 VN/Sil/Carb 4.88” 3HP / 3PH 1.25 74

Pumps are available in either 1 Phase or 3 Phase power options. 115V, 208-230/460V. * More options available – call with specifications. Dultmeier Sales has full access to the Scot Pump product lines ** Suffix ‘PE’ denotes premium efficient motor for greater longevity and lower operating costs. † 1.0 S.G. (Specific Gravity) is for water only; 1.25 S.G. is for liquids up to 10.4 Lbs./Gal. - Call for heavier products.

RETAIL $ 1026.44 956.76 1321.24 1081.38 1167.14 1321.24

Viton® is a registered trademark of DuPont Performance Elastomers

Common Repair Kits: Part No. Description RETAIL SC 118-000-581 Buna Carbon-Ceramic, 3 Phase Repair Kit........................................................................................... $ 92.46 SC 118-000-581E Viton®-Carbon / Silicon-Carbide, 3 Phase Repair Kit............................................................................ 145.73 SC 118-000-581F Viton®-Silicon-Carbide/Silicon-Carbide, 3 Phase (Severe Duty)........................................................... 157.79 SC 118-000-581-1 Buna Carbon-Ceramic, 1 Phase Repair Kit........................................................................................... 77.05 SC 118-000-581E-1 Viton® Carbon / Silicon-Carbide, 1 Phase Repair Kit............................................................................ 144.39 SC 118-000-581F-1 Viton® Silicon-Carbide/Silicon-Carbide, 1 Phase (Severe Duty)........................................................... 153.77

SERVICE & REPAIRS Did you know? We can service almost every brand of pump we sell in our catalog. Call us at 1-800-228-9666 (Omaha, NE) for a quote!

IND

DULTMEIER SALES • OMAHA, NE

(800) 228-9666

•

www.dultmeier.com

• DAVENPORT, IA

(800) 553-6975

E1242

Scot Stainless Steel Centrifugal Pumps

127

Stainless Steel Centrifugal Pumps Scot Pumps Stamped Stainless Steel Centrifugal Pumps can be used in an extremely wide and diverse array of applications. The possibilities are near endless for this pump line. Scot Pumps offer some of the highest quality stainless steel centrifugal pumps on the market. If you need added corrosion-resistance or simply want a top quality pump — don’t look any further than Scot Pumps. 232

Motorpump 232 Motor Frame: J56 Motor Options: ODP, TEFC, Explosion-Proof Motor RPM: 3500 or 1750 Inlet/Outlet: 1-1/2” x 1-1/4” FPT Seal: Type 21 Mechanical Seal

HP Options: 2 - 5 Max. Flow: 115 GPM Max. PSI: 68 Metallurgy: 304SS Impeller Type: Enclosed

Please Call With Specifications For Pump Pricing Common Repair Kits: Part No. Description RETAIL SC 118-000-581 Buna Carbon-Ceramic, 3 Phase Repair Kit........................................................................................... $ 92.46 SC 118-000-581E Viton®-Carbon / Silicon-Carbide, 3 Phase Repair Kit............................................................................ 145.73 SC 118-000-581F Viton®-Silicon-Carbide/Silicon-Carbide, 3 Phase (Severe Duty)........................................................... 157.79 SC 118-000-581-1 Buna Carbon-Ceramic, 1 Phase Repair Kit........................................................................................... 77.05 SC 118-000-581E-1 Viton®-Carbon / Silicon-Carbide, 1 Phase Repair Kit............................................................................ 144.39 SC 118-000-581F-1 Viton®-Silicon-Carbide/Silicon-Carbide, 1 Phase (Severe Duty)........................................................... 153.77 ** Dultmeier Sales has full access to the Scot Pump product lines. Call with Your System Needs Today and we will be happy to source your pumps or repair items.

Motorpump 236 Motor Frame: JM Motor Options: ODP, TEFC, Explosion-Proof Motor RPM: 3500 or 1750 Inlet/Outlet: 2” x 1-1/2” FPT Seal: Type 21 Mechanical Seal Part No. Port SC 3403K108BPE 2” x 1.5” SC 3403K211WPE 2” x 1.5”

HP Options: 3 - 7.5 Max. Flow: 180 GPM Max. PSI: 68 Metallurgy: 304SS Impeller Type: Enclosed

Motor Frame 236JM 236JM

236

Motor Type RPM Seal Impeller HP/PH S.G. GPM TEFC 3500 Buna/Carb/CM 5.8” 5HP / 3PH 1.00 160 TEFC 3500 Viton®/Ceramic 4.8” 5HP / 3PH 1.25 135

** Suffix ‘PE’ denotes premium efficient motor for greater longevity and lower operating costs. * More options available – call with specifications. Dultmeier Sales has full access to the Scot Pump product lines. † 1.0 S.G. (Specific Gravity) is for water only; 1.25 S.G. is for liquids up to 10.4 Lbs./Gal. - Call for heavier products.

RETAIL $ 2621.04 1855.90

Common Repair Kits: Part No. SC 118-000-605 SC 118-000-605A

Description RETAIL Buna Carbon-Ceramic Repair Kit................................................................................................................. $ 357.78 Viton®-Carbon / Silicon-Carbide Repair Kit................................................................................................. 361.80

Motorpump 320 Motor Frame: JM Motor Options: ODP, TEFC, Explosion-Proof Motor RPM: 3500 Inlet/Outlet: 2” x 1-1/4” Flange Seal: Type 21 Mechanical Seal

320

HP Options: 2 - 5 Max. Flow: 150 GPM Max. PSI: 51 Metallurgy: 304SS Impeller Type: Enclosed

Please Call With Specifications For Pump Pricing Viton® is a registered trademark of DuPont Performance Elastomers

Common Repair Kits: Part No. SC 118-000-673 SC 118-000-673A

Description RETAIL Buna Carbon Ceramic Repair Kit................................................ $ 205.02 Viton® Carbon Ceramic Repair Kit............................................. 209.04

** Dultmeier Sales has full access to the Scot Pump product lines. Call with Your System Needs Today and we will be happy to source your pumps or repair items.

IND

DULTMEIER SALES • OMAHA, NE

(800) 228-9666

•

www.dultmeier.com

• DAVENPORT, IA

(800) 553-6975

E1245

Stainless Steel Centrifugal Pumps

128

Pro-Steel Stainless Steel Centrifugal Pumps from Ebara are rated for dependable, continuous duty performance. Built for the most demanding of liquid transfer applications. Available in Straight Centrifugal, Self-Priming and High Pressure 2-Stage models. All pumps are “bulge formed” through a state-of-the-art manufacturing technique that increases pump efficiency, part integrity, reliability and longevity. Standard Features Include: Close-Coupled Design to save space • High Quality Stainless components and ceramic/Viton® seals for added corrosion resistance • Back Pullout Design allows for repairs without removing pumps from system • Mounting Versatility allows for horizontal or vertical service • Centerline Discharge and foot support under casing ensure maximum resistance to misalignment • Available with Flanged or FPT ports • Rated to 212° F. with standard ceramic/Viton® seals. (250° F. seals also available for single stage pumps). • Motors are single or three phase TEFC. (Explosion-proof or ODP also available). † Note: Flows are based on liquids with 1.0 specific gravity (water). For liquids other than water contact us for HP and chemical compatibility check.

Single Stage Straight Centrifugal FPT Ports

Max. Specific Part No. Max. Flow *Motor Inlet x Outlet Gravity EA 70-17 17 gpm @ 30 psi 3/4 hp, 1 ph 1-1/4" x 1" FPT 1.0 EA 70-17DE •17 gpm @ 30 psi 3/4 hp, 1 ph 1-1/4" x 1" FPT 1.0 EA 120-11 25 gpm @ 40 psi 1 hp, 1 ph 1-1/4" x 1" FPT 1.0 EA 120-13 25 gpm @ 40 psi 1 hp, 3 ph 1-1/4" x 1" FPT 1.0 EA 200-11 **40 gpm @ 35 psi 1-1/2 hp, 1 ph 1-1/2" x 1" FPT 1.0 EA 200-13 40 gpm @ 35 psi 1-1/2 hp, 3 ph 1-1/2" x 1" FPT 1.0 EA 200-51S **90 gpm @ 40 psi 3 hp, 1 ph 1-1/2" x 1" FPT 1.0 EA 200-53 90 gpm @ 40 psi 3 hp, 3 ph 1-1/2" x 1" FPT 1.0

Wt. RETAIL 34 lbs. $ 637.84 27 lbs. 672.68 38 lbs. 663.30 31 lbs. 686.08 40 lbs. 767.82 37 lbs. 757.10 44 lbs. 917.90 47 lbs. 1151.06

Max. † Flanged Ports Specific Part No. Max. Flow *Motor Inlet x Outlet Gravity Wt. RETAIL EA 32-125T1 **80 gpm @ 30 psi 3 hp, 1 ph 2" x 1-1/4" Flanges 1.0 97 lbs. $ 1961.76 EA 32-125T3 80 gpm @ 30 psi 3 hp, 3 ph 2" x 1-1/4" Flanges 1.0 79 lbs. 1622.74 EA 40-125B1 ••200 gpm @ 30 psi 5 hp, 1 ph 2-1/2" x 1-1/2" Flanges 1.0 109 lbs. 1835.80 EA 40-125B3 200 gpm @ 30 psi 5 hp, 3 ph 2-1/2" x 1-1/2" Flanges 1.0 99 lbs. 1744.68 EA 50-160T1 ••380 gpm @ 30 psi 10 hp, 1 ph 2-1/2" x 2" Flanges 1.0 185 lbs. 3043.14 EA 50-160T3 380 gpm @ 30 psi 10 hp, 3 ph 2-1/2" x 2" Flanges 1.0 165 lbs. 2402.62 230-Volt Only. Open Drip-Proof. 1-phase motors are 115/230 volt, 3-phase are 208/230/460 volt. † Designed for 150 lb. ANSI Flanges, (Not included). ** 230-Volt Only. Open Drip-Proof • ODP Motor with EPDM Seal. •• ODP Motor with VITON® Seal.

Two Stage Straight Centrifugal

FPT Ports

TEFC Motors • FPT Ports Max. Max. Part No. Flow Press. Flow@Press. Shown EA 2CDX21 25 GPM 83 PSI 26 gpm @ 60 psi EA 2CDX23 26 GPM 95 PSI 26 gpm @ 60 psi EA 2CDX33 53 GPM 86 PSI 50 gpm @ 60 psi EA 2CDX53 66 GPM 105 PSI 65 gpm @ 80 psi *1-phase motors are 230 Volt, 3-phase are 230/460 Volt.

Stainless Steel Centrifugal Pumps for Chemical Solutions Transfer

S.G. 1.0 1.0 1.0 1.0

Wt. 40 lbs. 40 lbs. 55 lbs. 99 lbs.

RETAIL $ 921.92 913.88 1116.22 1670.98

1ST PUMPS † Max. Flow @ Specific Part No. PSI Shown Gravity *Motor Inlet x Outlet GL 1ST1C4E4 12 gpm @ 30 psi 1.0 1/2hp, 1 ph 1-1/4" x 1" GL 1ST1C4F4 28 gpm @ 15 psi 1.0 1/2hp, 1 ph 1-1/4" x 1" GL 1ST1D1D2 17 gpm @ 36 psi 1.0 3/4hp, 1 ph 1-1/4" x 1" GL 1ST1F4C4 20 gpm @ 45 psi 1.0 1-1/2hp, 1ph 1-1/4" x 1" GL 1ST1G4C4 20 gpm @ 45 psi 1.4 2hp, 1ph 1-1/4" x 1" GL 1ST1E4D4 30 gpm @ 30 psi 1.0 1hp, 1ph 1-1/4" x 1" GL 1ST1F4D4 30 gpm @ 30 psi 1.4 1-1/2hp, 1ph 1-1/4" x 1" GL 1ST1G4A4 30 gpm @ 56 psi 1.0 2hp, 1ph 1-1/4" x 1"

Wt. 37 lbs. 37 lbs. 39 lbs. 49 lbs. 55 lbs. 45 lbs. 49 lbs. 53 lbs.

RETAIL $ 919.24 929.96 964.80 1206.00 1285.06 1066.64 1206.00 1325.26

GL 1ST1G9A4

*Motor 2 hp, 1 ph 2 hp, 3 ph 3 hp, 3 ph 5 hp, 3 ph

30 gpm @ 56 PSI

1.0

Inlet x Outlet 1-1/4" x 1" FPT 1-1/4" x 1" FPT 1-1/4" x 1" FPT 1-1/2" x 1" FPT

2hp, 3ph

1-1/4” x 1”

50 lbs.

1192.60

GL 1ST1G4B4 50 gpm @ 30 psi 1.0 2hp, 1ph 1-1/4" x 1" 53 lbs. 1279.70 GL 1ST1H4B4 50 gpm @ 30 psi 1.4 3hp, 1ph 1-1/4" x 1" 58 lbs. 1719.22 GL 1ST1H9B4 50 gpm @ 30 psi 1.4 3hp, 3ph 1-1/4" x 1" 51 lbs. 1721.90 * 1-Phase motors are 115/230V on 1 & 1-1/2 HP and 230V on others. 3-Phase motors are 208/230/460V. † Use pumps with 1.4 S.G. for heavy or viscous products such as fertilizers, brines, etc.

2ST & 3ST PUMPS † Max. Flow @ Specific Part No. PSI Shown Gravity *Motor Inlet x Outlet Wt. RETAIL GL 2ST1E4F4 50 gpm @ 18 psi 1.0 1hp, 1ph 1-1/2" x 1-1/4" 45 lbs. $ 1072.00 GL 2ST1H4A4 50 gpm @ 45 psi 1.0 3hp, 1ph 1-1/2" x 1-1/4" 58 lbs. 1721.90 GL 2ST1H9A4 50 gpm @ 45 psi 1.0 3hp, 3ph 1-1/2" x 1-1/4" 54 lbs. 1721.90 GL 2ST1F4E4 70 gpm @ 20 psi 1.0 1-1/2hp, 1ph 1-1/2" x 1-1/4" 48 lbs. 1168.48 GL 2ST1G4C4 70 gpm @ 30 psi 1.0 2hp, 1ph 1-1/2" x 1-1/4" 52 lbs. 1303.82 GL 2ST1H4C4 70 gpm @ 30 psi 1.4 3hp, 1ph 1-1/2" x 1-1/4" 58 lbs. 1721.90 GL 2ST1H9C4 70 gpm @ 30 psi 1.4 3hp, 3ph 1-1/2" x 1-1/4" 53 lbs. 1687.06 GL 2ST1J1G4 **70 gpm @ 52 psi 1.0 5hp, 1ph 1-1/2" x 1-1/4" 120 lbs. 1720.56 GL 3ST1G4E4 43 gpm @ 30 psi 1.2 2hp, 1ph 2” x 1-1/2” 55 lbs. 1361.44 GL 2ST1J9G4 70 gpm @ 52 psi 1.0 5hp, 3ph 1-1/2" x 1-1/2” 110 lbs. 2043.50 GL 3ST1H4B4 125 gpm @ 25 psi 1.0 3hp, 1ph 2" x 1-1/2” 58 lbs. 1721.90 GL 3ST1H4C4 90 gpm @ 25 psi 1.4 3hp, 1ph 2” x 1-1/2” 58 lbs. 1803.64 GL 3ST1H9B4 125 gpm @ 25 psi 1.0 3hp, 3ph 2" x 1-1/2” 52 lbs. 1742.00 GL 3ST1H9C4 95 gpm @ 25 psi 1.2 3hp, 3ph 2” x 1-1/2” 65 lbs. 1742.00 GL 3ST1J9B4 125 gpm @ 25 psi 1.5 5hp, 3ph 2" x 1-1/2” 65 lbs. 2347.68 GL 3ST1J1A4 **130 gpm @ 25 psi 1.4 5hp, 1ph 2” x 1-1/2” 120 lbs. 1746.02

Close-Coupled Pump/Motor Unit

Series NPE Stainless Steel Centrifugal Pumps from Goulds Pumps. The ideal choice for chemical solutions transfer. Standard close-coupled pump/ motor units or pedestal mount designs available in 316SS construction for corrosion resistance. All standard pumps are fitted with type 21 mechanical carbon/silicon carbide/Viton® seals. Motors are totally enclosed fan cooled, 1-phase or 3-phase. (ODP and explosion-proof also available). Maximum temperature is 250° F. Pumps can be mounted in horizontal or vertical position.

* 1-Phase motors are 115/230V on 1 & 1-1/2 HP and 230V on others. 3-Phase motors are 208/230/460V. ** 5 HP, 1 Phase, ODP Motor. † Use pumps with 1.4 S.G. for heavy or viscous products such as fertilizers etc. 1.2 S.G. is adequate for salt brine.

Viton® is a registered trademark of DuPont Performance Elastomers

IND

DULTMEIER SALES • OMAHA, NE

(800) 228-9666

•

www.dultmeier.com

• DAVENPORT, IA

(800) 553-6975

E0225

Stainless MP Pump Units FMX100 Series Pump Units

129

Stainless Flomax Self-Priming Pumps

Self Priming Centrifugal Pump

for Close-Coupling to Engines These Flomax 316 Stainless Pump Paks include the same great features and flow rates as the Flomax stainless pedestal pumps on this page, but are designed to close-couple directly to Honda (or equivalent) engines.316SS construction and Viton® mechanical seals.

FMX100

The 316 Stainless Steel FMX100 is a high performance, self-priming, centrifugal pump. This pump is ideal for industrial, agricultural, marine or commercial applications where corrosion resistance and suction lift is required. The FMX100 features all 316 stainless steel components for superior corrosionresistance when pumping chemical compounds. Features: Standard carbon/ceramic/viton® T-6 seal • Ports are 1” FNPT with a 1/4” NPT fill/prime port • Capable of 17 ft. suction lift at 3450 RPM. TEFC motors. FMX100 SERIES

Max. GPM @ Max. Spec. Part No. GPM 20 PSI Gravity HP Phase Voltage RETAIL MX 39786 55 30 1.33 1 1 115V $ 1120.24 MX 39788 55 30 1.33 1 3 230V 1061.28 MX 39549 55 30 Pedestal Pump Only for Long Coupling.. 946.04

For Close Coupling to Engines Max. GPM@ Keyed Part No. Ports Description GPM 20 PSI Shaft Wt. RETAIL MX 36860 2” 2” SS Flomax 8 Pump-Pak 160 110 3/4” 49 lbs. $ 2211.00 MX 34792 3” 3” SS Flomax 15 Pump-Pak 300 290 1” 49 lbs. 3715.82

316 Stainless Self-Priming Pump Units Engine Drive 316 Stainless construction with Viton® mechanical seals and suction flappers for excellent chemical resistance. Close-coupled to Honda engines (GX Industrial grade) on powder-coated steel base plates.

Stainless Flomax Self-Priming Centrifugal Pedestal Pumps D

Provides Excellent Chemical

316 Stainless Pump Units - Engine Driven Max. GPM @ **Max. Wt. Part No. Ports GPM 20 PSI Engine S.G. Lbs. RETAIL DU MP25GH-SS 2” X 2” 160 110 4.8 HP Honda (GX160) 1.4 94 $ 3297.74 DU MP313GH-SS 3” X 3” 300 290 11 HP Honda (GX340) 1.4 175 5125.50 DU MP313GHE-SS 3” X 3” 300 290 11 HP Honda (GX340)* 1.4 175 5386.80 * 12 Volt Start. ** 1.40 S.G. = 11.7 lbs/Gal.

Capability & Corrosion Resistance for Aggressive

39905

316 Stainless Self-Priming Pump Units Motor Drive

Fluids

The 316 Stainless Steel FLOMAX 8 & 15 provides excellent chemical compatibility and corrosion-resistance for “hard-to-handle” aggressive fluids making them ideal for numerous agricultural, industrial and marine applications. These pumps include Viton® suction flapper, priming chamber fill plug and a 2” or 3”ANSI 150# stainless flat face suction flange. The discharge port is SAE 4-bolt flat face and includes a 2” or 3” FNPT 150# stainless flat face bolt-on flange (not shown). The standard mechanical seal is carbon/ceramic/Viton®/stainless steel. (EPDM and Buna seals are available). FLOMAX 8 & 15 Max. GPM@ HP Req’d Part No. Series GPM 20 PSI For Heavier Liquids Seal RETAIL MX 36862 2” SS Flomax 8 160 110 5 HP (For 13 lbs/Gal) Single Viton $ 2109.16 MX 34793 3” SS Flomax 15 300 290 10 HP (For 11 lbs/Gal) Single Viton 4100.40 MX 39844 2” SS Flomax 8 160 110 7.5 HP (For 13 lbs/Gal) Dble. Viton 2835.44 MX 39866 3” SS Flomax 15 300 290 15 HP (For 10 lbs/Gal) Dble. Viton 4549.30

An excellent choice for pumping many chemicals where 316 stainless steel is required. These pump units consist of self-priming pumps constructed of 316 cast stainless steel (more durable than stamped stainless pumps). Seals and elastomers are Viton® or EPDM. Pumps are long-coupled to Totally Enclosed, Fan Cooled (TEFC) motors (1 or 3 Phase). Heavy duty steel base plates with powder coat paint finish and OSHA approved coupling guards.

316 Stainless Pump Units - Motor Driven Max. GPM @ ** Max. Wt. Part No. Ports GPM 20 PSI HP Phase S.G. Lbs. RETAIL DU MP3530-SSV 2” X 2” 160 110 5 3 1.4 190 $ 3683.66 DU MP3510-SSV 2” X 2” 160 110 5 1 1.4 145 4070.92 DU MP1033-SSV 3” X 3” 300 290 10 3 1.4 396 6393.14 DU MP1013-SSV 3” X 3” 300 290 10 1 1.4 396 6917.08 ** 1.40 S.G. = 11.7 lbs/Gal.

Viton® is a registered trademark of DuPont Performance Elastomers

IND

DULTMEIER SALES • OMAHA, NE

(800) 228-9666

•

www.dultmeier.com

• DAVENPORT, IA

(800) 553-6975

E1090

Self-Priming Poly Centrifugal Pumps

130

Polyester Transfer Pumps (Motor Drive)

Thermoplastic Pumps

Fertilizer transfer units, with PACER glass-filled polyester centrifugal pumps, have a Lovejoy shaft coupling with safety shield between the motor and pump shaft. EPDM mechanical seals. Units with TEFC, 3450-RPM, one or three phase motors in 2, 3, 5 and 7-1/2 HP are available. Do not pump substances which have pH factor of over 10 or a temperature of over 200° F. The PERFORMANCE CHART is based on water. NOTE: DO NOT USE STANDARD 3 HP SIZE FOR LIQUIDS HEAVIER THAN WATER - USE 3010-E instead.

Use of tough engineering thermoplastic makes this a desirable pump for pumping liquid products.The pump “castings” are made of thermoplastic polyester which is noted for its outstanding chemical resistance. EPDM mechanical seals are standard. Viton® also available.

2 to 7-1/2-HP Self-Priming

Self-Priming Poly Centrifugal Pumps 1-1/2" • 2" • 3" • Engine & Hydraulic Drive

FEATURES: Lightweight corrosionresistant thermoplastic polyester construction resists corrosion. FAST PRIMING - Will lift 25 feet in less than one minute. HIGH CAPACITY - 1-1/2" size will pump 100 GPM; 2" size will pump 150 GPM and 3" size will pump 200 GPM.

HIGH CAPACITY - PROTECTED SEAL DURABLE - MADE OF PARTS THAT WILL NOT RUST OR CORRODE

PROTECTED SEAL - Pump out vanes on back of impeller reduces pressure and eliminates dirt in the seal area.

INTERCHANGEABILITY OF PARTS - All internal parts are interchangeable on 1-1/2" & 2" size (Pacer). Note: Hydraulic Units have same pump specifications. PUMPS CAN BE USED FOR: Water, most fertilizers and deicing liquids. Most diluted agchemicals compatible with EPDM seal. Wt. Part No. Pump Style Ports Lbs. RETAIL PR SE1-1/2PL 4 HP Briggs Engine 1-1/2" FPT 36 $ 426.12 PR SEB2PLE 4 HP Briggs Engine 2” FPT 40 406.02 PR SEB2PLE5.5 6 HP LCT OHC Engine 2” FPT 47 411.38 PR SE2UL 5.5 HP Briggs Intek Engine 2" FPT 46 507.86 PR SE2ULE5HC 5.5 HP Honda Engine 2" FPT 45 824.10 PR SE3SLE5HCP 6.5 HP OHV Honda Engine 3" FPT 50 879.04 PR SE3XLE8CP * 8 HP Briggs Vanguard Engine 3" FPT 71 1242.18 PR SE2ILHYC 2" Hydraulic Pump Unit 2" FPT 16 694.12 PR SE3LLHYC 3" Hydraulic Pump Unit 3" FPT 18 749.06 PR 0005 EPDM Seal & O-Ring Kit for Pacer Pumps............. 1 63.38 PR 0017 Viton® Seal & O-Ring Kit for Pacer Pumps............. 1 164.49 PR 702EPU EPDM Rebuild Kit w/Impeller, Volute, & Seal Kit..... 1 107.87 PR SE2ULKIT Pump Only for SE2UL Only .................... 1 294.80 * With Roll Cage

PR2010

Max. Specific Wt. Part No. Ports HP Phase Gravity Volts Lbs. RETAIL DU PR2010 2" 2 1 1.2 115/230 85 $ 1768.80 DU PR2030 2" 2 3 1.2 230/460 80 1737.98 DU PR3010 2" 3 1 1.0 115/230 120 1947.02 DU PR3010-E 2" 3 1 1.7 115/230 120 1933.62 DU PR3030 2" 3 3 1.0 208/230/460 100 1688.40 DU PR5010 2" 5 1 1.4 230 130 2290.06 DU PR5030 2" 5 3 1.4 208/230/460 110 1952.38 DU PR5010A *2" 5 1 1.4 230 180 2346.34 DU PR5030A *2" 5 3 1.4 208/230-460 110 1917.54 DU PR5030B #2" 5 3 1.4 208/230-406 110 2030.10 DU PR7510 3" 7-1/2 1 1.4 230 165 3088.70 DU PR7530 3" 7-1/2 3 1.4 208/230/460 140 2512.50

Poly Pump Repair Parts

D D

Poly Pump mounted on cast-iron bearing pedestal

Pedestal Pumps are available in 2" and 3" sizes for long coupled applications with gasoline engine or electric motor power. Pumps must run at 3450 RPM. (Heavy-duty Cast Iron Bearing Pedestal and EPDM seals are standard). The “I” Series Models are available in an epoxy coated or stainless housing. Connections on the “I” Series are 2" MPT and 1-1/2" FPT ports. The clamping band holds the pump housings together and permits easy take-down for cleaning and maintenance. SE2JB and SE2JV Series are high flow pumps with Buna or Viton® seals. See performance chart upper right side of this page (2” High flow models). Temperature Range: -10° F. to 130° F. * HP Shaft Wt. Part No. Ports Req'd. Size Lbs. RETAIL PR SE2ELCSS Pacer Pump, Cast Iron Pedestal 2" x 2” 2 3/4" 15 $ 467.66 PR SE2HLCSS Pacer Pump, Cast Iron Pedestal 2" x 2” 3 3/4" 15 467.66 PR SE2FLCSS Pacer Pump, Cast Iron Pedestal 2" x 2” 5 3/4" 15 467.66 PR S3A-097 Pacer Pump, Cast Iron Pedestal 3" x 3” 7-1/2 3/4" 15 510.54 PR ISEP2GLCSS Stainless Pump *2" MPT & 1-1/2” FPT 5 3/4" 27 1043.86 PR SE2JBPSS Pacer Pump, Buna, Poly Pedestal 2" x 2” 5 3/4" 13 467.66 PR SE2JVPSS Pacer Pump, Viton®, Poly Pedestal 2" x 2” 5 3/4" 13 561.46 PR SE2JBCSS Pacer Pump, Buna, CI Pedestal 2” x 2” 5 3/4” 13 467.66 PR SE2JVCSS Pacer, Pump, Viton® CI Pedestal 2” x 2” 5 3/4” 13 637.84 * HP required at 1.4 S.G. liquids. Viton® is a registered trademark of DuPont Performance Elastomers

IND

NOTE: 3" Units not available with the carrying handle.

* High flow series with Buna seal . # High Flow Series with Viton® Seal. Both with 975.30 Impeller.

Self-Priming Pedestal Pumps

Stainless Pump mounted to cast iron bearing pedestal

HEAD (in feet) 10 20 30 40 50 60 PRESSURE (PSI) 4.3 8.7 13.0 17.3 21.7 26.0 SIZE HP 2" 2 GPM 120 100 80 60 50 25 2" 3 GPM 175 160 155 140 125 100 2" 5 GPM 175 165 150 135 125 100 * 2" 5 GPM 240 230 215 190 155 115 3" 7-1/2 GPM 275 275 250 220 180 150 * High flow units.

DULTMEIER SALES • OMAHA, NE

(800) 228-9666

•

Part No. Ref. # Description Per Pump RETAIL PR 882.90 1 Shaft Sleeve 1 $ 2.48 PR 884.71 2 Slinger, Buna-N 1 2.49 PR 721.10 4 Nuts, Body, SS 10 1.35 PR 703.30B 6 Bracket 1 79.06 PR 719.72 7 O-Ring, Body, EPDM 1 18.76 PR 717.72 *8 O-Rings, Screw, EPDM 5 1.35 PR 715.10 9 Screws, Bracket 4 5.12 PR 754.72 *10 O-Ring Segment, EPDM 1 3.77 PR 976.72 *11 O-Ring, Shaft Seal, EPDM 1 3.77 PR 750.40 12 Plug 4 3.77 PR 714.12 *13-14 EPDM Shaft Seal 1 36.45 PR 714.14 13-14 Viton® Shaft Seal 1 88.44 PR 667.30 15 Impeller, 3 Vane, .535" Wide, 4.75" Diameter 31.89 PR 704.30 15 Impeller, 3 Vane, .535" Wide, 5.50" Diameter 31.89 PR 974.30 15 Impeller, 4 Vane, .600" Wide, 4.75" Diameter 31.89 PR 975.30 15 Impeller, 4 Vane, .975" Wide, 4.75" Diameter 31.89 PR 706.30 15 Impeller, 5 Vane, .535" Wide, 5.50" Diameter 31.89 PR 716.10 *16 Screw, Impeller, SS 1 5.12 PR 702.30 17 Volute, Flat 1 64.32 PR 725.10 *18 Screw, Side Volute 2 2.43 PR 771.10 *19 Screw, Top Volute 1 3.77 PR 705.72 20 Check Valve, EPDM 1 29.88 PR 720.10 21 Screws, Body, SS 10 2.43 PR 1009.72 22 O-Ring, Drain Plug, EPDM 1 2.43 PR 723.30 23 Plug, Drain 1 3.77 TK 12777 24 Plug, Filler 1 2.43 PR 765.72 *25 O-Ring, Fill Plug, EPDM 1 1.35 PR 718.10 *27 Key, SS, 1" Long 1 5.12 PR 759.20 31 Bearing Pedestal 1 76.38 PR 777.00 32 Bearing/Shaft Assembly, STD 1 85.09 PR 0778.11 *36 Shim (part of repair kit) 1 N/C PR 1001.30A 42 Smooth Body 1-1/2" NPT 1 111.89 PR 1002.30B 42 Smooth Body 2" FPT 1 109.21 * INCLUDED IN 0005 EPDM REPAIR KIT. VITON® REPAIR KIT 0017

www.dultmeier.com

• DAVENPORT, IA

(800) 553-6975

E0232

Centrifugal Transfer Pumps

131

2” 316 Stainless Self-Priming Pump Units An excellent choice for pumping many chemicals compatible with 316 stainless steel. These pump units consist of 2” x 2” self-priming pumps constructed of 316 cast stainless steel (more durable than stamped stainless pumps). Elastomers are Viton® or EPDM depending upon chemical compatibility. Pumps are longcoupled to Totally Enclosed, Fan Cooled (TEFC) motors (1 or 3 Phase). Heavy duty steel base plates with powder coat paint finish and OSHA approved coupling guards. Call for chemical compatibility check.

Pressureseal Pumps ®

Made to provide trouble-free performance with any liquid. Pumps will run dry without seal problems. Pump and Lucite Expansion Tank are factory assembled with 50% Ethylene Glycol and pressurized to 125 PSI. Pumps are straight or self-priming and available in pedestal, clutch or electric motor drive. Cast iron construction with sealed bearings and double viton mechanical pressure seal. Pumps should operate at 3600 RPM. Note: Follow maintenance instructions on the pressure seal system. D

SCOT Pressure Seal Pumps with 3 Phase TEFC Motor Drive, Base Plate, Guard and Lovejoy Couplings.

SCPS3002

Max. GPM Part No. S.G. @20 PSI Motor DU PSE303-53 3x3 Straight 1.0 SG 250 5 HP, 3 PH DU PSE303-73 3x3 Straight 1.0 SG 300 7.5 HP, 3 PH DU PSE303-73A 3x3 Straight 1.4 SG 250 7.5 HP, 3 PH DU PSE303-103 3x3 Straight 1.0 SG 350 10 HP, 3 PH DU PSE303-153 3x3 Straight 1.4 SG 350 15 HP, 3 PH DU PSE403-153 4x3 HB Straight 1.4 SG 350 15 HP, 3 PH DU SCPS3002 3x3 Self Prime 1.4 SG 350 15 HP, 3 PH Note: Water=1.0 S.G.(Specific Gravity)=8.33 lbs. 1.4 S.G.= 12 lb. Material

316 SS Pump Units Max. Wt. Part No. HP Phase Elastomer S.G. Lbs. RETAIL DU TK3530-SSV 5 3 Viton® Single Seal 1.4 145 $ 3825.70 DU TK3510-SSV 5 1 Viton® Single Seal 1.4 145 4198.22 DU MP3530-SSV 5 3 ** Viton® Single Seal 1.4 145 3683.66 DU MP3510-SSV 5 1 ** Viton® Single Seal 1.4 145 4070.92 DU TK3530-SSE 5 3 EPDM Single Seal 1.4 145 3694.38 DU TK3510-SSE 5 1 EPDM Single Seal 1.4 145 4066.90 DU TK3530-SSW 5 3 * Viton® Double Seal 1.4 145 4313.46 DU TK3510-SSW 5 1 * Viton® Double Seal 1.4 145 4704.74 * Viton® Double Seal with liquid reservoir. ** Includes MP SS Flomax Pump.

Wt. Lbs. RETAIL 230 $ 3477.30 250 3998.56 250 3998.56 270 4283.98 300 4911.10 300 4945.94 350 5709.74

SCOT Pressure Seal Pumps Less Motor Part No. Description SC PSP303 3x3 FPT Straight Centrifugal Pump SC PSP403HB 4x3 HB Straight Centrifugal Pump SC PSP303SP 3x3 FPT Self Priming Pump

1” Self Priming 316 Stainless Centrifugal Pumps

GPM Wt. @20 PSI Lbs. RETAIL 365 90 $ 1992.58 365 90 2026.08 335 140 2349.02

Belt Driven Clutch Pumps

• Investment Cast 316 Stainless Steel • Self-Priming to 6’; Viton® Mechanical Seal

PSD Model

• ODP or TEFC Motors

with Pressure Seal

• Self-Cleaning; Semi-Open Impellers

• 12 Volt with 7” Clutch (6” Available)

• All Iron (Stainless Available)

• Viton® Mechanical Seals

• Top Discharge (12 o’clock) is Standard; (9 o’clock Available)

Many Other Models Available!

Size

PERFORMANCE DATA

1/2 HP

PSI 5 9 14 18 20 GPM 40 35 25 15 5 PSI 5 9 14 23 29

1/2 & 2 HP GPM 63 57 47 30 10

GPM Part No. @ 20 PSI Wt. RETAIL SC PSD303 3x3FPT Pump Unit with Pressure Seal 365 90 lbs. $ 2382.52 SC PSD403HB 4x3HB Pump Unit with Pressure Seal 365 95 lbs. CALL SC RKLD300V 3x3FPT Pump Unit Less Pressure Seal 365 68 lbs. 1561.10 SC RKLD400V 4x3HB Pump Unit Less Pressure Seal 365 68 lbs. 1630.78 SC 118-000-236V Pressure Tube Assembly for Double Seal Pumps............. 820.08 DU PS-STAND Steel Bracket for Scot Pressure Assembly............... 134.00

Max. Spec. Wt. Part No. Gravity Motor Voltage Lbs. RETAIL GR 4295-98 1.6 1/2 HP, 1 PH, ODP 115/230V 38 $ 892.44 GR 4298-98 1.6 1-1/2 HP, 1 PH, ODP 115/230V 45 986.24 GR 429K-98 1.6 3/4 HP, 3 PH, TEFC 208-230V/460V 40 911.20 GR 429N-98 1.6 2 HP, 3 PH, TEFC 208-230V/460V 45 1144.36

Chemflo Close-Coupled Stainless Centrifugal Pumps

Self Priming Centrifugals

For Severe Duty Service

“CHEMFLO” Pumps are designed for severe service use. The 316SS investment casting is more corrosion-resistant than 304 and much stronger than stamped/formed stainless pumps. 3500 RPM motor. These pumps have Viton® mechanical seals and stainless fasteners. Nine sizes are available to 450 GPM and 225’ head. Call for compatibility check with your liquid products.

Close Coupled

FEATURES: • Stainless Steel

RKLD Model

FPT Ports

• TEFC Motors • FPT Ports

FEATURES:

• Viton® Mechanical Seals

• 316 Stainless Steel End Suction Centrifugals

• Viton® Mechanical Seals

• For Water Use or Other Light Liquids

are Standard D

Flow @ *Max. Part No. Pressure Shown *Motor Inlet x Outlet S.G. EA JEU8067T1C 18 gpm @ 25 psi 1 HP, 1 PH 1-1/4" x 1" FPT 1.0 EA JEU8067T3C 18 gpm @ 25 psi 1 HP, 3 PH 1-1/4" x 1" FPT 1.0 EA JEU1506T1C 18 gpm @ 45 psi 2 HP, 1 PH 1-1/4" x 1" FPT 1.0 EA JEU1506T3C 18 gpm @ 45 psi 2 HP, 3 PH 1-1/4" x 1" FPT 1.0 *1-Phase Motors are 115/230 Volt, 3-Phase are 208/230/460 Volt.

Wt. RETAIL 36 lbs. $ 708.86 30 lbs. 687.42 50 lbs. 812.04 46 lbs. 824.10

For Water @ 1.0 S.G; Not for Heavy or Viscous Liquids.

Other Chemflo Models Available - Call for Availability

Part No. MX MP400 *Chemflo Pump with 5 HP, 3-Phase, TEFC Motor. 2” x 1-1/2”............................. * 125 GPM@77’ head, up to 1.3 s.g. liquids.

RETAIL CALL

Viton® is a registered trademark of DuPont Performance Elastomers

IND

DULTMEIER SALES • OMAHA, NE

(800) 228-9666

•

www.dultmeier.com

• DAVENPORT, IA

(800) 553-6975

E0222

132

Engine Drive & ANSI Centrifugal Pumps

• Straight & Self Priming Models.

• Stainless Steel Shaft Sleeves.

• All Iron Construction.

• Adapter Bracket between engine and pump head is open to protect engine.

• Viton® Mechanical Seals on all models. • Pump Head is entirely supported by engine.

Replacement Seals & Repair Kits for Scot Pumps Part No.

Straight Centrifugal

Size

Seals

Pump Size

RETAIL

SC 101-000-102 3/4" Buna 1-1/2 & 2" $ 43.55 SC 101-000-115 3/4" Viton® 1-1/2 & 2" 54.54 SC 101-000-104 1-1/4" Buna 3" 91.79 SC 101-000-194 1-1/4" Viton® 3" 110.55 SC 101-000-191 1-1/2" Viton® 3" 119.26 SC 101-000-204 1-1/2" Sil-Carbide 3" 328.30 SC 101-000-168 1-1/2" Buna 3" 101.17 SC 118-000-217 * Repair Kit 1-1/2-2" 80.40 SC 118-000-220 * Repair Kit 3" 175.21 * INCLUDES: Viton® Seal, O-Rings, Shaft Sleeve, Flinger & Shims.

Self-Priming Centrifugal

Total Pump Head in PSI At Various GPM - Water Engine Pump Model 25 50 75 100 150 250 350 Wt. Part No. HP Type Size Type GPM GPM GPM GPM GPM GPM GPM Lbs. RETAIL SC FG413V5.5H 5.5 Honda 1-1/4” x 1” FPT Straight 40 - - - - - - 60 $ 1530.28 SC FG460V5 5.5 Honda 1-1/2" x 1-1/4" FPT Straight 50 40 - - - - - 60 1432.46 DU FG461V55H 5.5 Honda 2" x 2" FPT Straight 72 64 53 38 - - - 70 1072.00 DU FKG74AV55H 5.5 Honda 2" x 2" FPT Self Prime 35 25 15 - - - - 78 1169.82 DU FKG75AV8H 8 Honda 3" x 3" FPT Self Prime 50 50 50 50 40 30 25 160 2523.22 *Note: Has electric start - less cable and battery. ** Briggs Intek Pro Engine. OTHER MODELS AVAILABLE.

Visit Our Office in Omaha, Nebraska

INTEK PRO Pumps

13808 Industrial Road • Omaha, NE 68137 1-800-228-9666 • 1-402-333-1444 • FAX: 1-402-333-5546 D

Visit Our Office in Davenport, Iowa Large cavity to handle even catastrophic seal failure.

Oversized slinger to prevent any liquid from contacting engine. Extra large weep holes.

These pumps are from Pacer & Banjo and use the Briggs Intek engines and are equipped with a large cavity “spacer” to separate the engine and pump. The separator includes an oversized slinger & large weep holes to prevent fluid from entering the engine due to a seal failure. 2" Pumps flow 200-230 GPM.

601 West 76th St. • Davenport, IA 52806 1-800-553-6975 • 1-563-386-0930 • FAX: 1-563-386-5448 e-mail: dultmeier@dultmeier.com • website: dultmeier.com

Part No. Description Wt. RETAIL PR SE2RLE5PROTK 2" 5 HP Pacer Pump Unit 48 lbs. $ 566.82 PR SE3SLE6CP 3" 6.5 HP Pacer Pump Unit * 62 lbs. 726.28 TK 200P6PROVA 2" 6.5 HP Banjo Pump Unit 45 lbs. 881.72 * With Briggs Vanguard Engine.

Viton® is a registered trademark of DuPont Performance Elastomers

IND

DULTMEIER SALES • OMAHA, NE

(800) 228-9666

•

www.dultmeier.com

• DAVENPORT, IA

(800) 553-6975

E0229

Self-Priming Centrifugal Pumps

133

Series 222 • 333 • 444 - High Volume Self Priming • Cast Iron These High Volume 2", 3" & 4" Self-Priming Pumps are an excellent choice for liquid transfer including fertilizers, chemicals, water, etc. Cast Iron construction for durability. Heavy-duty double sealed bearings. Solid stainless shafts. Bolt-on threaded port flanges for easy maintenance. Stainless fasteners. EPDM gaskets, and o-rings (Viton® also available). Carbon-ceramic-Viton® mechanical seals. (3" & 4" Pumps include severe duty silicon-carbide-Viton® mechanical seal). MAXIMUM ENGINE PROTECTION • V Shaped Volute for Quick Priming. • Heavy-duty slinger seal on shaft. • Large Weep Holes Between Pump End and Engine.

INTEK ENGINE FEATURES: • Aluminum Cylinder • Heavy Duty Flywheel • Overhead Valve (OHV) • Dual Oil Fill & Drain • 3.00 Quart Fuel Tank • Low-Tone Muffler • Breather Through Air Cleaner

222PI5 5.5 HP Briggs Intek

PUMP FEATURES: • 225 GPM Max. Flow & 160 GPM @ 20 PSI. • 650 GPM Max. Flow on 4" Pumps & 515 GPM Maximum on 3" Pumps. • Carbon/Ceramic/Viton® Mechanical Seal. • Dynamic Balanced Impeller.

GX160 HONDA FEATURES: • Commercial Grade • Overhead Valve (OHV) • Oil Alert • Quiet Easy Starting • Industrial 2-Stage Air Filter

Max. Engine Drive Models Max. GPM @ Spec. Wt. Part No. Description GPM 20 PSI Ports HP Gravity Lbs. RETAIL TK 222PIH5 Cast Iron Pump with OHV Honda 190 145 2" x 2" 5.5 1.4 100 $ 1083.59 TK 222PI6 Cast Iron Pump with OHV Briggs Intek 225 160 2" x 2" 6.5 1.4 110 643.20 TK 222PIH6 Cast Iron Pump with Honda 225 160 2" x 2" 6.5 1.4 110 1117.45 TK M222PIH6W * Cast Iron Wet Seal Pump with Honda 225 160 2” x 2” 6.5 1.4 115 1750.04 TK 333PI13 Cast Iron Pump with OHV Honda, 12V Starter 430 280 3" x 3" 13 1.4 250 3307.12 TK 444PIH24 Cast Iron Pump with OHV Honda,12V Starter 650 480 4” x 4” 24 1.4 375 6265.84 * Manifold Pump with Wet Seal.

222PIH5 5.5 HP Honda

ALL ENGINE DRIVE MODELS can be used for water and heavy liquids such as fertilizers, chemicals, deicing liquids; (5.5 HP models include trimmed impellers for this capability).

Electric Motor Drive Models (Self-Priming) Cast Iron long-coupled to 3450 RPM TEFC Motor on Steel Base Plates (powder-coated paint) with Lovejoy Couplings & Guard. Viton®, Carbon, Ceramic mechanical seal • Dynamic balanced impeller • Stainless shaft sleeves • Use for water or heavier liquids such as fertilizer, chemicals, deicing liquids, etc. Max. GPM@ Max. Spec. Part No. GPM 20 PSI Gravity Ports HP Phase Voltage DU TK22251 225 165 1.4 2" x 2" 5 1 208-230/460 DU TK22253 225 165 1.4 2" x 2" 5 3 208-230/460 DU TK33315-3 * 515 412 1.4 3” x 3” 15 3 208-230/460 DU TK44420-3 * 650 490 1.0 4” x 4” 20 3 208-230/460 DU TK44425-3 * 650 490 1.33 4” x 4” 25 3 208-230/460 * Severe Duty (Silicon Carbide) Seal Included.

TK44425-3 Electric Drive

Hydraulic Drive Models

222PIHY

Hydraulic Drive

Gresen MGG2 Hydraulic Motor for open or closed center systems. Max. Required Max GPM @ Spec. Hydraulic Hydraulic Speed Part No. GPM 20 PSI Gravity Ports Motor HP Flow (GPM) (RPM) TK 222PIHY 200 135 1.4 2" x 2" 12 6 - 10 3450 TK M222PIHYW * 200 135 1.4 2” x 2” 12 6 - 10 3450 TK M332PIHYW * 350 300 1.4 3” x 3” 21 9 - 13 3450 * Manifold Pumps with Wet Seal. 222POI

Pump Only (Close-Coupled)

Wt. Lbs. RETAIL 75 $ 1361.44 75 1691.08 190 2263.26

Pumps Only

222PBI

Pump Only (Pedestal)

Wt. Lbs. RETAIL 250 $ 2391.90 250 2121.22 560 5154.98 570 5796.84 650 6365.00

See Top for Construction & Seal Details

Max. Max. GPM@ Spec. Wt. Part No. GPM 20 PSI Gravity Type Ports Lbs. RETAIL TK 225POI *190 145 1.4 Closed-Coupled 2" x 2" 45 $ 451.58 TK 222POI **225 165 1.4 Close-Coupled 2" x 2" 70 471.68 TK 222PBI †225 165 1.4 Pedestal 2" x 2" 75 644.54 TK M222PBIW #225 165 1.4 Pedestal 2” x 2” 75 921.92 TK 333PBI 515 412 1.4 Pedestal 3" x 3" 195 2046.18 TK 444PBI 650 490 1.4 Pedestal 4" x 4" 215 2048.86

* Trimmed impeller for use with 5.5 HP engine having 3/4" straight keyed shaft. ** For use with 6.5 HP engine having a 3/4" straight keyed shaft. † Includes a 3/4" straight keyed stainless steel shaft for long coupling to 5 HP 3450 RPM motor or engine. # Wet Seal with Manifold Ports.

Viton® is a registered trademark of DuPont Performance Elastomers

IND

DULTMEIER SALES • OMAHA, NE

(800) 228-9666

•

www.dultmeier.com

• DAVENPORT, IA

(800) 553-6975

E0230

Self-Priming Centrifugal Pumps

134

Poly Self-Priming Centrifugal Engine Pumps Constructed of glass-filled polypropylene for excellent chemical resistance and economy. Self-priming design with unique “V” shaped volute and check valve for fast priming. EPDM mechanical seals (Viton® available). Engines separated from pumps by 1/2” extension including special slinger and weep holes to protect engine from pump seal leaks. Prime and drain plugs. BANJO POLY ENGINE DRIVEN PUMPS PORTABLE LIGHTWEIGHT SELF-PRIMING, FAST PRIMING

Part No. TK 200P6PRO TK 200P6PROE TK 200PH-5 TK 200PH5W TK 300PH-6 TK 200PO TK 205PO TK 300PO TK PRC200 * Wet Seal Pump.

Max. GPM Part No. Description Ports GPM @20 PSI TK 201PIH5W 2” CI Wet Seal Pump with.... 5.5 HP Honda Engine........... 2” 175 80 TK 201PI6PROW 2” CI Wet Seal Pump with 6.5 HP Briggs Engine........... 2” 140 110 TK 201PH5SSW 2” 316SS Wet Seal Pump with 5.5 HP Honda Engine........... 2” 175 80 TK 201PH5SSWE 2” 316SS Wet Seal Pump with 5.5 HP Honda Engine - Electric 2” 175 80 TK 301PIH13W 3” CI Wet Seal Pump with 13 HP Honda Engine, 12V Start 3” 330 290 TK 301PH-13SSW 3” 316SS Wet Seal Pump with 13 HP Honda Engine, 12V Start 3” 330 290

PRC200 Roll Cage Can be installed on 2” & 3” Poly Pumps (Not Wet Seal)

Engine Ports Wt. RETAIL 6.5 HP Briggs Intek Pro 2" FPT 55 lbs. $ 475.70 6.5 HP Briggs Intek Pro, 12Volt Start 2” FPT 55 lbs. 627.12 5.5 HP Honda Engine 2" FPT 50 lbs. 797.30 5.5 HP Honda Engine * 2” FPT 50 lbs. CALL 6.5 HP Honda Engine 3" FPT 70 lbs. 942.02 Poly Pump, 2”, 3 Vane Impeller............................... 242.54 Poly Pump, 2”, 5 Vane Impeller............................... 242.54 Poly Pump, 3”, 3/4” Shaft....................................... 344.38 Roll Cage - Fits 2” & 3” Poly - Not Wet Seal........... 144.39

Wt.

RETAIL

100 lbs.

$ 1551.72

100 lbs.

1389.58

110 lbs.

2792.56

110 lbs.

3088.70

270 lbs.

2954.70

285 lbs.

8696.60

Poly & Cast Iron “Double Wet Seal” Self-Priming Centrifugal Transfer Pumps

Stainless Self-Priming Centrifugal Transfer Pumps

Engine Mount Version Shown

Features: New compact design • Run dry capability • Durable cast iron construction • Dynamically balanced impeller • Replaceable inlet and outlet flanges • Graphite loaded silicon carbide seal with stainless steel cup and spring with EPDM seal (Viton® Not Available) • Pump end separated from engine • Double seal contained in ethylene glycol reservoir.

Cast Iron & Stainless Steel “Double Wet Seal” Self Priming Centrifugal Engine Pumps

Constructed of 316 stainless steel for excellent chemical resistance and durability. Self-priming design with check valve. Bolt-on flanged ports for easy maintenance. Viton® mechanical seals and gaskets. Available in pedestal version for long coupling to electric motors or gas engines (run at 3450 RPM), “Pump-Packs” for close coupling to gas engines and complete with gas engines (also available in C-Face design for close-coupling to electric motors).

Max. GPM Part No. Description Ports Shaft GPM @20 PSI Wt. RETAIL TK 200PBSS 2” 316SS Pedestal Pump..... 2" 3/4" 190 115 55 lbs. $ 2299.44 TK 300PB-SS 3” 316SS Pedestal Pump..... 3” 3/4” 340 215 100 lbs. 3588.52 TK 300PH13SS 3” 316SS Pump with 13 HP Honda Engine....................... 3” - 340 215 150 lbs. 7439.68 TK 200PO-SS 2” 316SS Pump-Pack*........ 2” 3/4” Key 190 115 55 lbs. 2074.72 TK 300PO-SS 3” 316SS Pump-Pack*........ 3” 1” Key 340 215 55 lbs. 3423.70 * Pump-Packs for close coupling direct to engines - Verify shaft with engine shaft. For 2” pumps, use 3 HP for water and 5 HP for heavier liquids like fertilizer; for 3” pumps, use 8 HP for water and 11 HP or 13 HP for heavier liquids.

Poly Self-Priming Centrifugal Pedestal Pumps & Bare Pumps for Engine Drive Constructed of glass-filled polypropylene for excellent chemical resistance and economy. Self-priming design with check valve. Cast D iron bearing pedestal. EPDM mechanical seals (Viton® available). 205PO and 300PO are bare pumps for engine drive. Requires 3/4” shaft. Shipped unassembled. Max. GPM *HP Part No. Description Ports Shaft GPM @20 PSI Req’d Wt. RETAIL TK 205PB 2” Poly Pedestal Pump 2” 3/4” 195 145 5/5 20 lbs. $ 373.86 TK 300PB 3” Poly Pedestal Pump 3” 3/4” 300 150 8/11 25 lbs. 566.82 TK 205PO 2” Poly Bare Pump 2” - 195 145 5/6 10 lbs. 242.54 TK 300PO 3” Poly Bare Pump 3” - 300 150 8/11 15 lbs. 344.38 TK M230PO 2” High Flow Poly Manifold for Engine Drive...................... 9 lbs. 292.12

These pumps include a double seal contained in an Ethylene Glycol reservoir. Pump is separated from engine. Run dry capability. Carbon ceramic seal with EPDM polymers on poly units. Viton® on cast iron. Check valve on inlet. Poly pumps are FPT. Cast iron pump is flanged. Ship truck only due to weight and size.

Max. GPM Part No. Description Ports GPM @20 PSI Wt. RETAIL TK 300P11PROW 3” Poly Double Seal Pump with 11 HP Briggs Pro Engine 3” 293 176 150 lbs. $ 1658.92 TK 300PH13W 3” Poly Double Seal Pump with 13 HP Honda Engine, 12 Volt Start 3” 293 176 160 lbs. 1987.89 TK 300PBW 3” Poly Double Seal Pump with 3/4” Shaft & Pedestal for Long Cplg. 3” 293 176 25 lbs. 814.72 TK M332PIH13W 3” CI Wet Seal Pump, Flange Conn., 13 HP Honda, 12V & Pull Rope 3” 330 290 155 lbs. 2528.58

Self-Priming Cast Iron Double Wet Seal Transfer Pumps Features: New compact design • Run dry capability • Durable cast iron construction • Dynamically balanced impeller • Replaceable inlet and outlet flanges • Graphite loaded silicon carbide seal with stainless steel D cup and spring with EDPM seal (Viton® Not Available) • Pump end separated from engine • Double seal contained in ethylene glycol reservoir. Max. Wt. Part No. Wet Seal Pump GPM Lbs. RETAIL TK 201PBIW 2" Pedestal Pump, Cast Iron*................... 170 65 $ 835.62 TK 201POIW 2" Pump for 3/4" Engine Drive, Cast Iron. 170 65 690.10 TK 201PBSSW 2" Pedestal Pump, Stainless**................. 170 65 2793.90 TK 301PBIW 3" Pedestal Pump, Cast Iron *.................. 306 116 1632.12 TK 301POIW 3" Pump for 1" Engine Drive, Cast Iron..... 330 118 1394.94 TK 301PBSSW 3" Pedestal Pump, Stainless**................. 306 120 3876.62 * With Stainless Impeller. ** Complete SS Pump.

Viton® is a registered trademark of DuPont Performance Elastomers

IND

DULTMEIER SALES • OMAHA, NE

(800) 228-9666

•

www.dultmeier.com

• DAVENPORT, IA

(800) 553-6975

E0776

Centrifugal & Manifold Pumps

135

Viton® is a registered trademark of DuPont Performance Elastomers

Base Mounted Centrifugal Pump with C-Face Motor Drive

2” Poly Manifold Pumps Wet Seal with Flange Connections

Available in Polypropylene • Cast Iron • Stainless

Double Seal In Wet Reservoir • New Compact Design • Run Dry Capability • Double Seal Contained in Ethylene Glycol Reservoir. Carbon Seal Faces with S.S. Cup & Spring with EPDM Rubber • Pump End Separated from Engine • Large Weep Holes Between Pump End & Engine • “V” Shaped for Quicker Priming

• 3600R TEFC Motors Single or Three Phase • 2” FPT Connections • Shaft Slinger on Poly Unit, Stainless Shaft Sleeve on Cast Iron & Stainless Units. • Viton® Internals on Cast Iron & Stainless, EPDM Internals on Poly with Viton® Optional • Steel Baseplate

Stainless Steel & Cast Iron Model

Part No. Description TK 234PPE5 2” Poly Pump with 5 HP, 3 Phase Electric Motor........................................... TK 234PPE51 2” Poly Pump with 5 HP, 1 Phase Electric Motor, Close Coupled.................. DU 234PIE5 2” Cast Iron Pump with 5 HP, 3 Phase Electric Motor........................................... DU 234PIE51 2” Cast Iron Pump with 5 HP, 1 Phase Electric Motor........................................... DU 234PE5SS 2” S.S. Pump with 5 HP, 3 Phase Electric Motor........................................... DU 234PE51SS 2” S.S. Pump with 5 HP, 1 Phase Electric Motor...........................................

Flow @ 30 PSI

Wt. Lbs.

72 GPM

135 $ 1486.06

72 GPM

145

1642.84

72 GPM

175

2174.82

72 GPM

200

2465.60

97 GPM

185

3810.96

97 GPM

210

4089.68

Wet Seal Reservoir Double Seals

RETAIL

M220PBW

Part No. Description HP TK M220P6PROW 2" Poly Manifold Wet Seal Pump with 6.5 HP Briggs Engine Pro Series....... 6.5 TK M220PH5W 2” Poly Manifold Wet Seal Pump with 5.5 HP Honda Engine........................ 5.5 TK M220PBW 2” Poly Manifold Wet Seal Bearing Pedestal Pump with 3/4” Shaft & 5 Vane Impeller -

2” Poly Manifold Pumps with Flange Connections

47 lbs. $ 824.10 50 lbs.

1255.58

19 lbs.

565.48

• Precision Molded Construction • Lightweight • CorrosionResistant • Superior Design M220PH6

• Low Maintenance • EPDM Standard Seal (Viton® Available)

D D

M225PO

M330P11PRO Part No. Description TK M300P11PRO 3" Poly Manifold Pump with 11 HP, 12-Volt Briggs Engine Pro Series with Electric Start & Pull Rope................. TK M300PO 3” Poly Manifold Pump Only with 3/4” Shaft for Engine.................

Viton® is a registered trademark of DuPont Performance Elastomers

Part No. Description HP TK M220P6PRO 2" Poly Manifold Pump with 6.5 HP Briggs Intek Pro Engine............ 6.5 TK M220P6PROE 2” Poly Manifold Pump with 6.5 HP Briggs Intek Pro, 12 Volt Start.. 6.5 TK M220PH6 2” Poly Manifold Pump with 6.5 HP Honda Engine............................ 6.5 TK M225PO 2” Poly Manifold Pump ONLY with 3/4” Shaft & 5 Vane Impeller................ - TK M230PO 2” High Flow Poly Manifold for Engine Drive - * Super Flow Impeller

Wt. Lbs.

RETAIL

55 lbs. $ 482.40 55 lbs.

770.50

55 lbs.

842.86

9 lbs. 9 lbs.

289.44 292.12

Features: FPT Connections • 150 GPM @ 10 PSI & 72 GPM @ 30 PSI • Viton® Seal • Self-Priming • Manifold Flanges Available. Description Wt. RETAIL 2” Cast Iron Pump with 5.5 HP Honda Engine......... 87 lbs. $ 1034.48 2” Cast Iron Pump with 6.5 HP Briggs Engine......... 90 lbs. 696.80 2” Cast Iron Pump ONLY.... 52 lbs. 434.16 DULTMEIER SALES • OMAHA, NE

HP 11 -

Wt. Lbs.

RETAIL

150 lbs. $ 1235.48 20 lbs.

375.20

3” Poly Manifold Pumps Wet Seal with Flange Connections

Double Seal In Wet Reservoir

2X2 Cast Iron Pumps

IND

RETAIL

EPDM Seals Standard - Viton® Optional

Part No. TK 200PIH5 TK 200PI6PRO TK 200POI

Wt. Lbs.

3” Poly Manifold Pumps with Flange Connections

• Precision Molded Construction • Lightweight • Corrosion-Resistant • Superior Design • Low Maintenance • EPDM Std. Seal (Viton® Available)

M220PH5W

(800) 228-9666

•

• New Compact Design • Run Dry Capability • Double Seal Contained in Ethylene Glycol Reservoir. D Carbon Seal Faces with S.S. Cup & Spring with EPDM Rubber • Pump End Separated from Engine • Large Weep Holes Between Pump End & Engine M300PH13W • “V” Shaped for Quicker Priming Wt. Part No. Description HP Lbs. RETAIL TK M300PH13W 3" Poly Manifold Wet Seal Pump with 13 HP Honda Engine with Electric Start & Pull Rope....................................... 13 110 lbs. $ 2169.46 TK M300PBW 3” Poly Manifold Wet Seal Bearing Pedestal with 3/4” Shaft & 4 Vane Impeller..... - 26 lbs. 817.40

www.dultmeier.com

• DAVENPORT, IA

(800) 553-6975

E1073

Centrifugal Transfer Pumps

136

Cast Iron Transfer Pumps Ideal for Tank Filling and Chemical Transfer FEATURES: • Cast Iron Housing & Impeller

• Available in Multiple Configurations: - Gas Engine Units Powered by PowerPro™ Engine - Hydraulic Motor Drive, Open or Closed Center Systems - Pedestal Pump - Pump Kit for Bolting to a Gas Engine - Kit for Bolting to AC Motor Also Available - Engines are EPA Certified. Not for use in California

Hydraulic Drive Pump

• Flow Rates Up to 330 GPM; Pressures to 60 PSI

• Viton® Mechanical Seal

Pedestal Pump

• One-Year Hypro Warranty on All Pump & PowerPro™ Engines • Pump & Engine Repair Parts Available • Base Plates also Available. Part No. Description Wt. RETAIL HY 1532C-6SP 2” C.I. Hypro Pump with 6.5 HP PowerPro Engine........................... 126 lbs. $ 725.61 HY 1532C-160HSP 2” C.I. Hypro Pump with 4.8 HP Honda Engine................................ 130 lbs. 1113.54 HY 1533C-13SP 3” C.I. Hypro Pump with 13 HP PowerPro Engine............................ 163 lbs. 975.52 HY 1533C-13ESP 3” C.I. Hypro Pump with 13 HP PowerPro Engine, 12 Volt Start...... 163 lbs. 1501.47 DU 1533C-13HN 3” C.I. Hypro Pump with 12 HP Honda Engine, 12 Volt Start........... 163 lbs. 2170.80 HY 9332C-HM1-SP 2” C.I. Hypro Pump with Hydraulic Motor (8-10 GPM Oil)................ 48 lbs. 1365.46 HY 9232C-SP 2” C.I. Hypro Pedestal Pump Only.................................................... 45 lbs. 525.28 HY 9233C-SP 3” C.I. Hypro Pedestal Pump Only.................................................... 85 lbs. 915.22 HY 3430-0673CSP 2” C.I. Hypro Pump for Mounting to 5.5 or 6.5 HP Gas Engine........ 68 lbs. 451.58 HY 3430-0674CSP 3” C.I. Hypro Pump for Mounting to 13 HP Gas Engine................... 82 lbs. 869.66 HY 2120-46 Replacement Viton® Seal for 2” Cast Iron Pump............................. - 72.36 HY 2120-47 Replacement Viton® Seal for 3” Cast Iron Pump............................. - 93.80

Poly Transfer Pumps

2" & 3”

Self-Priming Centrifugal Pumps Ideal for fertilizer & chemical transfer

Gas Engine Model 1542P

Aluminum Transfer Pumps • PowerPro Engine with Overhead Valve; Low Oil Sensor.

• Polypropylene Housing is Suitable for corrosive environments. • PowerPro Engine with Overhead Valve; Low Oil Sensor, Recoil.

• Self-Priming to 25 Feet Lift. EPDM Seal. Viton® Available on Some Models. • Use Nylon Impeller with Stainless Inserts for Suspension Solids to 3/8”.

Model 1543P-140FLG

1543P 9342P* 1542P

PSI 0 10 20 30 40 50 54 GPM 440 400 330 270 185 70 0

* @11 GM Oil Flow for 9342P.

Part No.

• Suction Lift to 23 ft./Roll Cage • 2” 5.5 HP or 3” 6.5 HP PART NO.

GPM @ 10 PSI

GPM @ GPM @ GPM @ GPM @ GPM @ GPM @ 15 PSI 20 PSI 25 PSI 30 PSI 35 PSI 40 PSI

Gas Engine

Hypro Pumps with Honda Engines

Model 1542P-65SPM with Roll Cage

Description Wt. RETAIL

HY 1542P-65SP 2” Poly Pump with 6.5 HP PowerPro... 58 lbs. $ 419.42 HY 1542P-65SPM 2” Poly Pump, 6.5 HP with Roll Cage... 58 lbs. 511.88 HY 1542P-65ESP 2” Poly Pump with 6.5 HP 12V PowerPro.... 58 lbs. 596.97 HY 1542PV-65SP 2” Poly Pump w/Viton® 6.5 HP PowerPro....... 58 lbs. 588.26 HY 9342P-HM5CSP 2” Poly Pump w/Hydraulic Drive.......... 27 lbs. 846.88 HY 1543P-130ESP 3” Poly Pump w/13 HP PowerPro, 12 Volt... 100 lbs. 1273.67 DU 1543P-13HN 3” Poly Pump w/12 HP Honda 12 Volt. 100 lbs. 1653.56 HY 9243P-SP 3” Poly Pedestal Pump......................... 28 lbs. 814.72 HY 9343P-GM6-SP 3” Poly Pump w/Hydraulic Drive.......... 31 lbs. 1318.56 HY 3430-0691 2” Polypropylene Pump Kit for 6.5 HP. 12 lbs. 213.06 HY 3430-0692 3” Polypropylene Pump Kit *............... 14 lbs. 381.90 HY 3430-0635 2” EPDM Seal Kit.................................. - 56.01 HY 3430-0659 2” Viton® Seal Kit ............................... - 99.83 HY 3430-0757 3” EPDM Seal Kit ................................. - 131.99 * For Installation on 13 HP Briggs or Honda Engines

IND

Part No. Description Wt. RETAIL HY 1542A-65SP 2” Aluminum Pump with 6.5 HP PowerPro Engine 55 lbs. $ 420.76 HY 1542A-550BSP 2” Aluminum Pump with 5.5 HP Briggs/Stratton 55 lbs. 566.82 HY 1543A-SP 3” Aluminum Pump with 6.5 HP PowerPro Engine 66 lbs. 335.00 HY 3430-0792 Wet End Assembly for 2” Aluminum Pumps......................... 89.11 HY 3430-0793 Wet End Assembly for 3” Aluminum Pumps......................... 133.33

HYPRO PERFORMANCE DATA

PSI 0 10 20 30 40 50 60 GPM 200 184 164 141 114 80 0

• MPT Thread Connections Poly Hose Barbs, Flynuts & Strainers Also Included

HY 1542A-SP 144 136 124 110 94 78 57 HY 1543A-SP 251 233 213 190 162 135 99

Flanged

PSI 0 10 30 40 50 58 GPM 200 182 162 136 106 65 0

• EPDM Seals

DULTMEIER SALES • OMAHA, NE

(800) 228-9666

Viton® is a registered trademark of DuPont Performance Elastomers

Part No. Description DU 1532C-5HN 2” Hypro Cast Iron Pump with 5 HP GX160 Honda Engine DU 1533C-13HN 3” Hypro Cast Iron Pump with 12 HP Honda Engine, 12 Volt *................................................. DU 1542P-5HN 2” Hypro Poly Pump with 5 HP GX160 Honda Engine....... DU 1543P-13HN 3” Hypro Poly Pump with 12 HP GX390 Honda Engine, 12 Volt *...................................... * Electric Start. •

www.dultmeier.com

• DAVENPORT, IA

(800) 553-6975

Wt. RETAIL 126 lbs. $ 1027.78 165 lbs. 2170.80 60 lbs. 778.54 105 lbs. 2170.80

E0759

Self-Priming Centrifugal Transfer Pumps

137

80 Series Self-Priming Heavy Duty Pumps Used for: Water • Agricultural Wastewater • Diesel • Fertilizer These 80 Series Self-Priming Pumps from Gorman-Rupp are designed for continuous, heavy-duty applications for low, medium or high flow rates.

Many Models Available - Call with Your Flow Rate Needs

Standard Features Include: • Efficient Self-Priming Design for Quick & High Suction Lifts. • Semi-Open Impellers Pass Large Solids.

80 Series Self-Priming Heavy Duty Pumps

• Cast Iron Bodies, Impellers, Bearing Pedestals & Steel Shafts for Strength & Durability. • Oil Lubricated Bearings (Double Radial & Single Thrust Bearings) with Sight Gauge. • Suction Check Valve Prevents Backflow when Pump is Shut Off. • Single Mechanical Seals. Severe Duty Seals Available for dirty water. (See Tungsten or Silicon-Carbide Seals Below). • Bolt-On Threaded Flanges for Easy Removal from Piping. • Available in Pedestal Pump (see models below) or as Complete Motor or Engine Driven Pump Units (Call with your flow rate requirements).

• For Water, Agricultural Wastewater, Diesel and Fertilizer. • 2” & 3” Pumps Pass 3/4” Solids; 4” Pumps Pass 1-1/8” Solids; 6” Pumps Pass 1-3/4” Solids; 8” Pumps Pass 2” Solids.

Maximum GPM @ * Motor Required Actual Part No. Ports GPM Pressure Shown Seal With Water Wt. RETAIL GR 82H3B 2” x 2” 205 190 @ 75 PSI Carbon, Ni-Resist, Viton® 15 HP, 3450 RPM 120 lbs. $ 3202.60 GR 82H20B 2” x 2” 205 190 @ 75 PSI Tungsten Viton® 15 HP, 3450 RPM 120 lbs. 3497.40 GR 83A3B 3” x 3” 360 300 @ 40 PSI Carbon, Ceramic, Viton® 10 HP, 3450 RPM 115 lbs. 3023.04 GR 83A52B 3” x 3” 360 300 @ 40 PSI Silicon Carbide, Viton® 10 HP, 3450 RPM 115 lbs. 3191.88 GR 84A3B 4” x 4” 800 600 @ 35 PSI Carbon, Ni-Resist, Viton® 20 HP, 1750 RPM 429 lbs. 8228.94 GR 84A52B 4” x 4” 800 600 @ 35 PSI Silicon Carbide, Viton® 20 HP, 1750 RPM 429 lbs. 8407.16 GR 86A3B 6” x 6” 1700 1100 @ 35 PSI Carbon, Ni-Resist, Viton® 30 HP, 1750 RPM 630 lbs. 8515.70 GR 86A52B 6” x 6” 1700 1100 @ 35 PSI Silicon Carbide, Viton® 30 HP, 1750 RPM 630 lbs. 10370.26 GR 88A3B 8” x 8” 2100 1800 @ 35 PSI Carbon, Ni-Resist, Viton® 60 HP, 1750 RPM 805 lbs. 11842.92 GR 88A52B 8” x 8” 2100 1800 @ 35 PSI Silicon Carbide, Viton® 60 HP, 1750 RPM 805 lbs. 12683.10 * Motor Required is not included with pump (informational only; HP shown is for pumping water). We can provide complete pump units with motor or engine drive, baseplate, coupling and guard.

“O” Series Self-Priming Pumps

Used for: Gasoline • Diesel • Water • Agricultural Wastewater Excellent pumps for refined fuels including gasoline, diesel, kerosene and other petroleum products. Also great for water. 3” Pumps are constructed of aluminum casings, Almag 35 or aluminum impellers, copper alloy replaceable wear rings and cast iron pedestals. Oil lubricated bearings and bolt-on FPT ports. 2” Pump is constructed with cast iron casing, copper alloy impeller and iron replaceable wear ring.

All pumps have Viton® mechanical seals. 2” Pump will pass 3/8” solids; 3” pumps will pass 7/16” solids and 4” pumps will pass 1/2” solids. Use with explosion-proof motors for gasoline and other flammable liquids. Not for fertilizer.

Maximum GPM @ ** Motor Required Actual Part No. Ports GPM Pressure Shown Seal With Water Wt. RETAIL GR 02K3B 2” x 2” 135 90 @ 26 PSI Carbon, Ni-Resist, Viton® 3 HP, 3450 RPM 46 lbs. $ 2377.16 GR 03J1B 3” x 3” 320 220 @ 50 PSI Carbon, Ni-Resist, Viton® 10 HP, 3450 RPM 78 lbs. 4119.16 GR 03H1B 3” x 3” 405 330 @ 50 PSI Carbon, Ni-Resist, Viton® 20 HP, 3450 RPM 74 lbs. 3707.78 GR 04B3B * 4” x 4” 700 550 @ 60 PSI Carbon, Ni-Resist, Viton® 30 HP, 1750 RPM 365 lbs. 12704.54 * Cast Iron casing with copper alloy impeller - Other “O” Series Models are available. ** Motor Required is not included with pump (informational only; HP shown is for pumping water). We can provide complete pump units with motor or engine drive, baseplate, coupling and guard. Viton® is a registered trademark of DuPont Performance Elastomers

IND

DULTMEIER SALES • OMAHA, NE

(800) 228-9666

•

www.dultmeier.com

• DAVENPORT, IA

(800) 553-6975

E0871

GORMAN-RUPP Centrifugal Trash Pumps

138

3” & 4” Engine Driven Trash Pumps

2” & 3” Engine Driven Trash Pumps Up to 1” Solids

• Aluminum Bodies with Cast Iron Impeller

• Self-Priming; lifts to 26', will handle 1" solids. • Easy Cleanout with One Tool Serviceability. • Light Weight Die Cast Aluminum Housings & Cast Iron Impeller for AbrasionD Resistance. • Severe Duty Siliconized Carbide, Ceramic, Viton® Mechanical Seals. • EPDM Elastomers GR 2S5AR (not for oil products) or optional Viton®. • Cast Iron MNPT Connections are Removable (Discharge also rotates). • Steel Roll Cage. • Gas Engines are standard; Diesel available. • Wheel Kit Optional. Max. Part No. Ports GPM * Engine

Wt. Lbs.

Up to 1-1/2” & 2” Solids

• Viton®/Sili-Carbide Severe Duty Seal • Self-Priming up to 20’ • Honda or Briggs & Stratton with Oil Alert • Pumps Include Roll Cage (4” Models include Wheeled Base) • Solids Handling up to 1.5” Diameter (2” for 4” Pumps)

• Large Cleanout Cover Plate

Max. Part No. Ports GPM * Engine

Wt. Lbs.

RETAIL

GR 3941-96 3" 305 8 HP Briggs 1350.................. 143 $ 1826.42 GR 3943-96 3” 305 8 HP Honda GX270.............. 158 2174.82 GR 3994-96 4” 535 13 HP Honda * GX390, OHV.. 238 4438.08 GR C402-90 Optional 16” Wheel Kit for 3” Models.................. 163.15 * 12V Start Engine (Battery is not included)

Cast Iron Sewage & Trash Pumps Industrial Grade with TEFC Motors

RETAIL

The solids handling capabilities of these pumps make them ideally suited for a variety of industrial applications including: sewage treatment, canneries, chemical processing, wineries, tanneries, meat packing, breweries, pulp, wood chips, process water, sludge and slime, waste water, white water and other applications. AMT Sewage/Trash pumps will easily handle liquids containing sewage, stone, sticks, mud and other solids. For use with nonflammable liquids compatible with pump component materials. Maximum 25% solids.

GR 2S5AR 2" 230 5 HP Briggs Vanguard 90 $ 1159.10 GR 2S5HR 2" 230 5 HP Honda 90 1307.84 GR 3S5AR 3" 290 5 HP Briggs Vanguard 100 1248.88 GR 3S5HR 3" 290 5 HP Honda 100 1356.08 * Note: Honda engines include oil alert feature. Bare pump kits also available to fit 5/8" and 3/4" threaded shaft engines.

GORMAN RUPP Heavy Duty Trash Pumps - High Capacity -

• 3” & 4” Models Feature Front Clean out

Self-Priming Centrifugal Transfer Pumps for Sludge, Heavy Solutions and Solids. Agricultural, Industrial or Construction Applications. Standard with engine shown or less engines. Ideal for handling slurries, suspensions or solids. Unique impeller design is perfect when shearing or agitation is required. Removable Cover Plate for ease in cleaning when necessary.

• Self-Priming up to 20 ft.

• Silicon Carbide/ Buna-N Mechanical Seal & O-ring

Standard Features: • Self-priming Design • Replaceable Wear Plate • Large Clean out Cover Plate • Viton®-Silicon Carbide Severe Duty Mechanical Seals • Ductile Iron Open Impeller • Maximum Suction Lift is 25' • Cast Aluminum Housing • Maximum Temperature is 160° F.

• Stainless Steel SemiOpen, Clog Resistant Impeller

Heavy Duty Trash Pumps

4 x 4 x 15 HP

B = 394C, 394D-95

3 x 3 x 10 HP

C = 394A-95m 394B-95 3 x 3 x 7.5 HP D = 393A, 393B-95

2 x 2 x 5 HP

E = 316A-95, 316B-95 2 x 2 x 3 HP

Gas Engine Driven - Self-Priming -

Gas Engine Units Also Include: Discharge Elbow, Steel Trash Strainer, Engine Recoil Starter & Roll Cage. (Two wheel cart assemblies available).

A = 399A-95

• Totally Enclosed Fan-Cooled Motors • Maximum Pressure 150 PSI & Maximum Temperature 180° F. • Built In Check Valve • Removable Cast Iron Volute/Wear plate; Back Pull Out

• Seal Flush Port Provided on 5 HP and Larger GR 13D1-GX240

Max Solids

Wt. Part No. Ports *GPM Capac. Body Engine Lbs. RETAIL GR 13D1-GX270 3" 375 1-1/2" Alum. 8HP Honda 136 $ 4192.86 GR 13D-GX270 **3” 375 1-1/2” Alum. 8HP Honda 136 3785.50 GR 14D1-GX390 4" 610 2" Alum. 13HP Honda 262 7450.40 * Maximum GPM show is based on 20' head and 5' suction lift. Higher discharge head or suction lift will lower output capacities. Other 4" and 6" Models also available. ** Includes grease lubricated mechanical seal.

Voltage Max. Ship Part No. Curve Ports HP PH @ 60 HZ+ Solids Wt./Lbs. RETAIL GR 316A-95 E 2” 3 3 230/460 1” 87 $ 1185.90 GR 316B-95 E 2” 3 1 230 1’ 94 1185.90 GR 393A-95 D 2” 5 3 230/460 1” 146 1679.02 GR 393B-95 D 2” 5 1 230 1” 170 2117.20 GR 394G-95 C 3” 7-1/2 3 230/460 1-1/2” 200 2148.02 GR 394B-95 C 3” 7-1/2 1 230 1-1/2” 255 CALL GR 394E-95 B 3” 10 3 230/460 1-1/2” 215 2895.74 GR 394D-95 B 3” 10 1 230 1-1/2” 285 3636.76

Viton® is a registered trademark of DuPont Performance Elastomers

IND

DULTMEIER SALES • OMAHA, NE

(800) 228-9666

•

www.dultmeier.com

• DAVENPORT, IA

(800) 553-6975

E0231

High Pressure Centrifugal & Sludge Pumps 1” Self-Priming Aluminum Engine Pump

3” Self-Priming “Sludge” Diaphragm Pumps

Great for Dewatering, Irrigation, Washdown & Transfer Features: Aluminum construction with Buna-N mechanical seal • Semiopen, clog-resistant impellers • Honda GXH25 engine • Self-priming to 15’ suction lift • Built-in check valve • 1” x 1” FPT ports with garden hose adapters included • Steel base & carrying handle included • Maximum flow 59 GPM • Maximum pressure 45 PSI • Provides 20 GPM at 22 PSI • 3/32” Maximum Solids • Maximum Temperature 180° F.

Part No.

Description

Wt.

GR 1G1XH

1” Aluminum S.P. Engine Pump 25 lbs. $ $ 668.66

Self-Priming & Engine Driven • Industrial Duty

2P5XHR 2” High Pressure - 1 Stage

Model No.

• Thermoplastic Rubber Diaphragm • 1-5/8” Diameter Solids Handling Capability D

• Gas Engine, Electric or Air Motor Drive • Wheel Kit with 10” Semi-Pneumatic Transport Wheels for Portability

Port Size Suct. x Disch. Max. Part No. HP Engine (NPT) Flow

Wt. Lbs.

RETAIL

GR 335A-96 5.5 B&S 3” x 3” 88 171 $ 2160.08 GR 3358-96 5.5 Honda GX 3” x 3” 88 182 2298.10 GR 3354-K6 Pump Kit, Less Engine.... 88 146 2007.32 GR 3355-K6 Pump Kit, Less Motor..... 58 146 2089.06 NOTE: DO NOT USE in explosive atmosphere or for pumping volatile, flammable liquids.

1.5” 2 Stage High Pressure pump

2” Engine Driven “High Solids-Content” Pump

4787-95 4789-95

PSI 25 45 65 75 85 - - GPM 65 50 33 21 8 - -

2P5XAR

PSI 45 65 75 85 95 25 GPM 120 96 70 60 48 25 -

2P5XHR

PSI 25 45 65 75 85 - - GPM 108 80 55 35 14 - -

• High Chromium Stainless Steel Internal Components Resist Wear from Sea Water or Up to 25% Sand & Debris • Silicon Carbide Mechanical Seal Resists Abrasives & Extends Seal Life • Heavy Duty Cast Iron Casing & Adapter Ensures Durability for Severe Service Conditions

PERFORMANCE DATA PSI 25 45 65 75 85 - - GPM 65 50 33 21 8 - -

• Handles Up to 1/2” Diameter Solids • Self-Primes to 10 ft. in 1 Minute with Priming Tee! • Honda GX160 5.5HP Engine

HP Engine 5.5 B&S CP650 6.5 Honda GX160

3358-96

• Delivers up to 90 GPM; Maximum Temperature is 180° F.

1-1/2” High Pressure Pump (2 Stage)

Part No. GR 4787-95 GR 4789-95

• Sand Cast Aluminum Construction for Portability & Durability

• Primes to 20’ After Initial Prime

Engine Driven High Pressure Pumps are designed for lawn sprinkling, agricultural spraying, dewatering, fire fighting, emergency water supply and pressure boosting. Wheel Kits available.

3” Diaphragm Pumps features 2-stage, 44 to 1 gear reduction with a large diameter output gear and heavy duty ball bearing construction. Often referred to as Mud Pumps or Sludge Pumps, diaphragm pumps are designed to pump mud, slurry, sewage and thick liquids that have the ability to flow. Industrial Duty. Suction and discharge port size cannot be reduced.

• Modular Component Design Permits Easy Maintenance & Cleanout; Suction Strainer Included

RETAIL

Engine Driven High Pressure Pumps • High Pressure Capabilities • 478 Series Include Cast Iron Bodies & Stainless Impellers • 2P5 Series Include Cast Iron Volutes, Aluminum Impellers & Casings • Buna-N Mechanical Seal & O-Ring (EPDM Seal on 2P5X Series) • Self Priming (Use Foot Valve at 10’ Lift) • Pumps Include Heavy Duty Steel Roll Cage • 3/8” Maximum Solids • Wheel Kits Available

139

Tank Wt. Material Size Run Time Lbs. RETAIL Cast Iron 3 Quarts 100 min. 104 $ 1033.14 Cast Iron 3.8 Quarts 100 min. 99 1218.06

Part No.

Performance Date PSI

10 2 30 40

GPM 152 122 80 22

Maximum Flow 168 GPM

Description

Wt.

GR 316F-95 2” Engine Driven High Solids Pump

85 lbs.

RETAIL

$ 1535.64

SHIPPING

2” High Pressure Pump (1 Stage)

Tank Wt. Part No. HP Engine Material Size Run Time Lbs. RETAIL GR 2P5XAR 5.0 B&S CP650 Aluminum 3 Quarts 120 min. 90 $ 1043.86 GR 2P5XHR 5.0 Honda GX160 Aluminum 3.8 Quarts 100 min. 86 1259.60

Viton® is a registered trademark of DuPont Performance Elastomers

IND

DULTMEIER SALES • OMAHA, NE

(800) 228-9666

•

www.dultmeier.com

• DAVENPORT, IA

(800) 553-6975

E0725

Helix Vertical Multistage Centrifugal Pumps

140

Helix V (Models V10 - V80) The Helix V Vertical Multistage Centrifugal Pumps are designed to serve a wide variety of markets and are used in applications such as water supply and pressure boosting, industrial circulation systems, water processing, water cooling circulation systems, washing systems and irrigation. For multi-pump systems see CO-Helix. Features: • Non-self-priming, high pressure, inline connections • User-friendly “X-Seal” cartridge mechanical seal which enables quick and easy maintenance • Integrated thrust bearings for reduced motor stress • Pump Lifting Lugs • Heavy Duty Pump Base

• Available with integrated frequency converter and electronically commutated (EC) motor for enhanced energy efficiency (See Wilo EXCEL).

Technical Specifications: • NSF 61 Certified for Potable Water • Power Connections: 3 PH – 208-230/460/575V • Fluid Temperature Range: -5°F to 250°F • Pressure Range: 232 PSI for Normal Models to 363 PSI for High Pressure Models • ANSI Class 300# Flange Connections • 304 Stainless Steel Construction (Cast Iron Available) • 6” Impeller Diameter Part No.

Description

WO 2700812 WO 2700817-H WO 2700182-H WO 2700183-H WO 2700229-H WO 2700228-H WO 2700196-H

Model V10, 11 Stages, EPDM Model V10, 18 Stages, EPDM Model V20, 16 Stages, EPDM Model V20, 18 Stages, EPDM Model V20, 18 Stages, EPDM Model V20, 16 Stages, EPDM Model V30, 16 Stages, EPDM

Flange Size

2 5 5 5 5 5 7.5

1-1/4” 1-1/4” 1-1/4” 1-1/4” 1-1/4” 1-1/4” 1-1/4”

• Max Flow Rate: 130 GPM • Max Head: 750 ft • EPDM Seals Standard (FKM Available) • TEFC Motors Standard (ODP Available Upon Request) • 304 Stainless Steel Construction Certified to NSF/ANSI 61 • Stainless Steel Volute, Impeller, & Shaft • Tungsten Carbide/EPDM (FKM Optional) Mechanical Seal Flow Rate 12 GPM @ 135 PSI 12 GPM @ 225 PSI 18 GPM @ 215 PSI 15 GPM @ 265 PSI 15 GPM @ 265 PSI 15 GPM @ 238 PSI 30 GPM @ 238 PSI

Voltage RETAIL 208-230/460 $ 2332.94 208-230/460 2689.38 208-230/460 2626.40 208-230/460 2753.70 575 2734.94 575 2725.56 208-230/460 3851.16

* “-H” Suffix Denotes High Pressure Model. Model Number Denotes GPM at Best Efficient Point.

More Models Available - Call for System Sizing & Pricing

Helix V (Models V110 - V270)

Features: • Non-self-priming, high pressure, inline connections

The Helix Vertical Multistage Centrifugal Pumps are designed to serve a wide variety of markets and are used in applications such as water supply and pressure boosting, industrial circulation systems, water processing, water cooling circulation systems, washing systems and irrigation. For multi-pump systems see CO-Helix.

• User-friendly “X-Seal” cartridge mechanical seal which enables quick and easy maintenance time by up to 70% • Standard EISA-compliant TEFC motors • Available with integrated frequency converter and electronically commutated (EC) motor for enhanced energy efficiency – See Wilo EXCEL • Floating Flanges for easy installation

Technical Specifications: • NSF 61 Certified • Power Connections: 3 PH –230/460/575V • Fluid Temperature Range: 4°F to 248°F • Pressure Range: 232 PSI for Normal Models to 362 PSI for High Pressure Models

• TEFC Motors Standard (ODP Available upon request) • 250# Stainless Steel ANSI Split Flange Connections • Tungsten Carbide/Ceramic Bearing

• 304 Stainless Steel Construction & 8” Impeller Diameter

• Cast Iron, Cataphoresis Coated Volute • Stainless Steel Impeller, Shaft, Pressure Shroud & Pump Base

• Max Flow Rate: 380 GPM

• Split ANSI Flange Connections

• Max Head: 800 ft • EPDM Seal Standard (FKM Available)

• TEFC Motors Standard (ODP Available upon request

Part No.

Description

Flange Size

WO 2700873-H WO 2700869 WO 2700870 WO 2700894 WO 2700879 WO 2700903 WO 2700884

Model V110, 7 Stages, EPDM Model V110, 5 Stages, EPDM * Model V110, 5 Stages, EPDM Model V110, 5 Stages, EPDM Model V190, 3 Stages, EPDM * Model V190, 3 Stages, EPDM * Model V270, 2 Stages, EPDM *

20 15 15 15 20 20 15

2” 2” 2” 2” 2-1/2” 2-1/2” 3”

Flow Rate 80 GPM @ 230 PSI 110 GPM @ 130 PSI 120 GPM @ 140 PSI 75 GPM @ 150 PSI 150 GPM @ 115 PSI 150 GPM @ 115 PSI 225 GPM @ 65 PSI

Voltage RETAIL 208-230/460 $ 5408.24 208-230/460 4724.84 208-230/460 4558.68 575 4748.96 208-230/460 5550.28 575 5778.08 208-230/460 4952.64

* Trimmed Impellers. “-H” Suffix Denotes High Pressure Model. Model Number Denotes GPM at Best Efficient Point.

More Models Available - Call for System Sizing & Pricing IND

DULTMEIER SALES • OMAHA, NE

(800) 228-9666

•

www.dultmeier.com

• DAVENPORT, IA

(800) 553-6975

E1259

Vertical Multistage Pump Package

141

Helix EXCEL Complete Vertical Multistage Centrifugal Pump Package The EXCEL Complete Pump and Plumbing Package is completely ready to plumb out of the box. The only exception would be the installation of a hydro pneumatic tank (sold separately). Hookup to your supply line and plumb in the discharge, wire the pump motor and you’re set. This is the ideal package for booster applications where a simplex pump system (single pump) is required. Where multiple pumps are required, see the CO-Helix Pump Packages for two to four pump systems. Pressure transducer comes installed. Features: • Highest Efficiency Motor-Driven Combo on the Market • Up to 50% Energy Savings Verses Standard Pump-Motor Assemblies • “Red-Button” LED Display Technology • Various Control Modes • Cartridge Seal for Easy Maintenance

• Optional Communication Gateways: BacNET, ModBUS and LonWorks • Optional Pressure Transducer Kits Available

Technical Data:

Materials of Construction:

• Temperature Range: -22°F to 248°F.

• 304 Stainless Steel

• Electrical Connection: 3PH / 460V

• Entire System Certified to NSF 61 for Potable Water (Models 10-80)

• Pressure Rating: 232 PSI on Low Pressure Models & 362 PSI on High Pressure Models

• Stainless Steel Volute, Impeller and Shaft

• Plumbing Connections: 1-1/4” to 3” NPT

• Tungsten Carbide/EPDM Standard Mechanical Seal or Optional Viton®/FKM

• Maximum Flow: 325 GPM • Maximum Head: 800 Ft.

Call for System Sizing & Pricing CO-Helix Vertical Multistage Centrifugal Pump Package

The CO-Helix Multistage Pump and Plumbing Package is completely ready to plumb out of the box. Hookup to your supply line(s) and plumb in the discharge line(s), wire the pump motors and you’re set. This is the ideal package for booster applications where a multi-pump system is required. Where single pump systems are required see Helix EXCEL Complete or Helix V Models. Hydro pneumatic is not installed - sold separately. Features: • Real-time Diagnostics and Remote Monitoring • Full System kWh Energy Reporting • Easy-to-use 7” Touchscreen Interface • Variable Speed Control per Pump • Cartridge Seal for Easy Maintenance • Onboard ModBUS and optional BacNET and LonWorks Interface • Balanced Run Time for All Pumps

• Adjustable Low-Pressure Cut-Out • Optional Hydro Pneumatic Tank Sold Separately

Materials of Construction:

Technical Data: • Temperature Range: -4°F to 248°F (min. 32°F for domestic water)

• 304 Stainless Steel

• Ambient Temperature Range: 32°F to 104°F

• Entire System Certified to NSF/ANSI 61 for Potable Water

• Electrical Connection: 3PH / 208-230/460/575V

• EPDM or FKM Elastomers (Optional)

• Pressure Rating: 232 PSI on Low Pressure Models & 363 PSI on High Pressure Models

• Stainless Steel Volute, Impeller and Shaft • Tungsten Carbide/EPDM Standard Mechanical Seal or Optional Viton®/FKM

• Plumbing Connections: Flanged 300# ANSI Class • Maximum Flow: V110-270 can achieve 1600GPM (4 pumps @ 400 GPM each) • Maximum Head: 580 Ft

Call for System Sizing & Pricing Viton® is a registered trademark of DuPont Performance Elastomers

IND

DULTMEIER SALES • OMAHA, NE

(800) 228-9666

•

www.dultmeier.com

• DAVENPORT, IA

(800) 553-6975

E1261

Multistage Centrifugal Pumps

142

Helix EXCEL Vertical Multistage Centrifugal Pumps The Helix EXCEL Vertical Multistage Product Line are designed to serve a broad range of industries and applications including, but not limited to water supply, pressure boosting, cooling systems, boiler feed, pressure washing, and irrigation. Maximum Flow on the EXCEL is 320 GPM and max. head is 800 feet. These units are designed to offer superior energy efficiency by reducing consumption up to 70%. The Electrically Commuted (EC) motor is at the heart of this efficiency. The technology allows the motor to learn the most efficient operating points of the plumbing system and manipulate the motor speeds to meet system demands – thus reducing energy consumption.

Features: • High Efficiency Electrically Commuted (EC) Motor D D

• Up to 70% Speed Reduction • Cartridge mechanical seal for quick and easy maintenance • Variable Pressure, Constant Pressure and Variable Speed Control Modes • Optional BacNET, ModBUS, or LonWorks interface modules

Technical Specifications: • Low Pressure Models up to 232 PSI; High Pressure Models up to 362 PSI • 3500 RPM Motor (TEFC) • ANSI Flange Connections: • Models 10-30: 1-1/4” ANSI Flange 300# • Models 50-110: 2” ANSI Flange 300# • Models 190: 2-1/2” ANSI Flange 300# • Model 270: 3” ANSI Flange 300#

• Power: 460V / 3 PH / 60Hz • Fluid Temperature Range: Models 10-80: -22°F to 248°F. Models 110-270: -4°F to 248°F • EPDM Mechanical Seals are standard (FKM Available) • 304 Stainless Steel Volute (316SS on FKM-fitted Models is not NSF 61 rated) • Stainless Steel Construction Certified to NSF 61 (Models 10-80)

Part No.

WO 4172028 WO 4172026 WO 4169585 WO 4172018 WO 4172012 WO 4216087

Description Model 10, 8 Stage, EPDM, 304SS Model 20, 18 Stage, EPDM, 304SS Model 20, 14 Stage, EPDM, 304SS Model 30, 13 Stage, EPDM, 304SS Model 50, 12 Stage, EPDM, 304SS Model 110, 4 Stage, EPDM. 304SS

Flange Size

2 5 5 7.5 10 10

1-1/4” 1-1/4” 1-1/4” 1-1/4” 2” 2”

Flow Rate@70% Load RETAIL

8 GPM @ 54 PSI 20 GPM @ 86 PSI 15 GPM @ 86 PSI 25 GPM @ 86 PSI 40 GPM @ 91 PSI 80 GPM @ 50 PSI

$ 4724.84 7331.14 6068.86 7604.50 8152.56 7987.74

* Model Number Denotes GPM at Best Efficiency Point.

Stainless Vertical Multi-Stage Pumps E-SV™ Stainless Pumps from Goulds Pumps. These Multi-Stage, Vertical Pump and Motor units are ideal for pressure boosting of water supplies, reverse osmosis transfer systems, agricultural irrigation, commercial washing systems, hot & cold water circulation for HVAC applications, boiler feed, etc. Multi-stage design allows for a wide range of flows from 5 to 700 gpm and pressures from 20 to 500 psi. Standard Features: • 304SS Stainless Steel construction • TEFC NEMA Motors (ODP also available) • Silicon Carbide Seal with Viton® Elastomers • Inline ANSI flange inlet x outlet (top/bottom fittings also available) • Simplified design for maximum reliability and fast repair • Impeller O-ring seal produces high pressure and efficiency • Rated to temperatures from -20˚ F. to +250˚ F. • Motors are 60 hz, 3500 rpm and high efficiency. • Optimized hydraulic design results in superior performance, efficiency and low NPSHR.

Note: All Pumps are Special Order and Non Returnable Many Other Pumps Available - Call with Flow & Pressure Requirements.

IND

DULTMEIER SALES • OMAHA, NE

Motor Part No. (TEFC) Voltage Flow Rate Ports RETAIL GL 3SV16 3hp, 1ph 115/208-230V 16 gpm @ 200 psi 1-1/4” Flange* $ 2492.40 GL 3SV163 3hp, 3ph 208-230/460V 16 gpm @ 200 psi 1-1/4” Flange* 2588.88 GL 5SV17 5hp, 1ph 208-230V 26 gpm @ 216 psi 1-1/4” Flange* 3412.98 GL 5SV173 5hp, 3ph 208-230/460V 26 gpm @ 216 psi 1-1/4” Flange* 3240.12 GL 10SV123 10hp, 3ph 208-230/460V 50 gpm @ 234 psi 2” Flange 5291.66 GL 10SV14 15hp, 3ph 208-230/460V 53 gpm @ 260 psi 2” Flange* 6742.88 GL 15SV15 25hp, 3ph 208-230/460V 80 gpm @ 375 psi 2” Flange** 7731.80 EV R114S 1-1/4” 304SS Threaded Flange, Class 300...................................... 73.70 EV R200S 2” 304SS Thrreaded Flange, Class 300........................................... 89.11 * Pump Flanges are 304 Stainless ANSI Class 300, Raised Face. ** This model has cast iron flanges & base with 304 stainless pump end. — Flange Gaskets Also Available —

(800) 228-9666

•

www.dultmeier.com

• DAVENPORT, IA

(800) 553-6975

E1260

Centrifugal & Mag Clutch Drive Pumps Polypropylene Centrifugal Pumps

Mag Clutch Drive Pumps

Hypro’s Polypropylene Centrifugal Pumps ensure long life because of their excellent corrosion resistant characteristics. The lightweight polypropylene pump is the first choice for handling acid based fertilizers. All parts in contact with the fluid pumped are manufactured of 30% glass-filled polypropylene. 1-1/2” x 1-1/4” FPT; Carbon-Ceramic Viton® Mechanical Seal.

316 Stainless & Cast Iron

Features: • • • • • • •

PTO - GEAR DRIVEN 540 or 1000 RPM The proven, smooth-running gear mechanisms used in Hypro’s standard 9000 Series pumps are utilized for increasing PTO speed. Gears are safely enclosed in the factory lubricated case. Available in a Gear Driven 1” Solid Shaft with 1-3/8” PTO spline (9006PO-6 spline; 9008PO-21 spline). CCW rotation when facing shaft.

143

Pedestal Mount with DC Clutch Drive Ports: 1-1/4” x 1-1/2” FPT 200 x 2220 Universal Flange Connections on (U) on Some Models Temperatures to 140° F. / 4 Amp Draw on Clutch Nylon Impeller on Cast Iron & Polypropylene on Stainless Rotation CCW Facing Clutch End of Pump Shaft. CW on CR Models Viton® Seal on Cast Iron & Silicon Carbide on Stainless

Hydraulic Motor Driven (Not Shown)

HM3 For Large Open Center Systems HM4 For Closed Center Systems

Pedestal Mount for Direct or Belt/Pulley Drive

The Hypro hydraulic motor features a fixed displacement internal gear design for smooth operation. An internal by-pass needle valve regulates hydraulic oil flow to the gears. A double-lip Teflon shaft seal provides exceptional reliability even with high hydraulic back pressure. HM3 - 24 GPM Maximum Oil; 1/2” Ports HM4 - 7 GPM Maximum Oil; 1/2” Ports Use 2120-9 seal.

The pedestal mounted pump is designed for direct drive with an electric motor or belt and pulley drive with an electric motor or gas engine. It has a 7/8" Stainless Steel shaft with a 3/32" x 3/16" keyway. 1-1/2” x 1-1/4” Ports. 4200 RPM Max. Note: Use 9203P-SR for Clockwise rotation. Part No. HY 9006PO HY 9008PO HY 9303PHM4 HY 9203PS HY 3430-0332 HY 3430-0333

40 PSI

60 PSI

100 PSI

120 PSI

140 PSI

RPM GPM HP GPM HP GPM HP GPM HP GPM HP

3600 92 5.0

50 3.7

4200 115 7.7

98 7.1

56 5.3

5000 138 12.6 130 12.2 118 11.6 88 9.9 45 7.2

Part No. Connections Material Seal Rotation Wt. RETAIL HY 9263CC 1-1/4” x 1-1/2” FPT Cast Iron Viton® CCW 23 lbs. $ 862.96 HY 9263CCR 1-1/4” x 1-1/2” FPT Cast Iron Viton® CW 23 lbs. 872.34 HY 9263S-CB 1-1/4” x 1-1/2” FPT Stainless Silcarbide CCW 23 lbs. 1482.04 HY 9263S-CBR 1-1/4” x 1-1/2” FPT Stainless Silcarbide CW 23 lbs. 1523.58 HY 3430-0332 Viton® Seal Repair Kit....................................................... 56.28 HY 3430-0589 Silcarbide Seal Repair Kit................................................... 203.68 Note: Silcarbide Seal Option is Available on Cast Iron Units (B).

dultmeier.com

Drive Style Max. GPM Wt. RETAIL 540 RPM PTO ........ 88 37 lbs. $ 1151.06 1000 RPM PTO ...... 94 37 lbs. 1179.20 Hyd. Motor Driven .. 82 19 lbs. 1053.24 Pedestal Mount ....... 103 13 lbs. 566.82 2120-9 Seal/O-Ring Kit (Hydraulic Pumps) 56.28 2120-11 Seal/O-Ring Kit (PTO Pedestal Pumps) 67.67

Kits contain all normal wear parts except shafts & Impellers.

Visit Our Web-Site: www. dultmeier.com We Now Have Our Catalogs as Well as Parts Schematics Online!

E-Mail us: dultmeier@dultmeier.com

• Track Your Order Status and History! • Secure Site for Safe On-Line Ordering.

Viton® is a registered trademark of DuPont Performance Elastomers

IND

DULTMEIER SALES • OMAHA, NE

(800) 228-9666

•

www.dultmeier.com

• DAVENPORT, IA

(800) 553-6975

E0794

Centrifugal & Clutch Drive Pumps • Hyd. System

144

Centrifugal Pumps with Integrated Valves

Centrifugal Pumps with Double Oasis Wet Seals Pump Reliability:

Hydraulic Motor:

• Oasis™ Double Wet Seal operates in Barrier Fluid Eliminating Run Dry & Abrasion Failures. Pressurized Barrier Fluid prevents Chemical Contact with Seal. • E-Coat Protection on all castings for Excellent Corrosion Protection.

• 4,000 PSI Maximum Pressure. • Five Motor Bearings. • Integrated Anti-Cavitation Check.

These Pumps include PULSE WIDTH MODULATED Control Valves. Provides quick rate changes for constant and variable rate applications. For use with Closed Center Hydraulic Systems. Pumps run only as fast as needed.Twin valve design prevents overspeeding. Valox impeller standard, cast iron or stainless are optional. Deutsch connectors (2 Pin female DT04-2P).

2-Year Warranty on Pump & Hydraulic Motor

125 • 650 • 750 • 850 Series 750 & 850 Models are Standard with Oasis™ Double Wet Mechanical Seal

Part No. Description Wt. AC 150F-PWM-206 Cast Iron Pump with 7 GPM Hydraulic Motor with PWM Valve. Inlet is Flanged 220FP & 1-1/2” FPT, Outlet is Flanged 200 Std. Port & 1-1/4” FPT. 145 GPM - 120 PSI Max. Severe Duty Silicon Carbide Seal. 38 lbs. AC 150FS-PWM-206 Same As Above but with 316 Stainless Pump................ 38 lbs. AC 150F-PWM Cast Iron Pump with 11 GPM Hydraulic Motor with PWM Valve. Inlet is Flanged 220FP & 1-1/2” FPT, Outlet is Flanged 200 Std. Port & 1-1/4” FPT. 155 GPM - 130 PSI Max. Severe Duty Silicon Carbide Seal. 38 lbs. AC 155FS-PWM 316 Stainless Pump with 11 GPM Hydraulic Motor with PWM Valve. Inlet is Flanged 220FP & 1-1/2” FPT, Outlet is Flanged 200 Std. Port & 1-1/4” FPT. 155 GPM - 130 PSI Max. Severe Duty Silicon Carbide Seal. 37 lbs. AC 205F-PWM Cast Iron Pump with 11 GPM Hydraulic Motor with PWM Valve. Inlet is Flanged 300 Inlet Port & Flanged 220 FP, Outlet Port. 240 GPM - 120 PSI Max. Severe Duty Silicon Carbide Seal........................................................ 40 lbs. AC 205FS-PWM 316 Stainless Pump with 11 GPM Hydraulic Motor with PWM Valve. Inlet is Flanged 300 Inlet Port & Flanged 220 FP, Outlet Port. 240 GPM Max. - 120 PSI. Severe Duty Silicon Carbide Seal........................................................ 40 lbs.

(Severe Duty and Oasis™ Double Wet Seals also available for 650 Series)

FMC650HYD Threaded

FMC750FHYD Flanged

Part No. Description RETAIL AC FMC-WS-125HYD Cast Iron Centrifugal Pump. (E-Coated) 1-1/4” x 1” FPT. 4 GPM. Hydraulic Motor. Maximum Flow is 85 GPM. Maximum Pressure is 100 PSI. Oasis™ Double Wet Seal. Wt. 51 lbs............................. $ 1475.34 AC FMC650HYD Cast Iron Centrifugal Pump. 1-1/2” x 1-1/4” FPT. 14.5 GPM. Hydraulic Motor. Maximum Flow is 170 GPM. Maximum Pressure is 160 PSI. Single Mechanical Seal. Wt. 39 lbs............................... 1389.58 AC FMC650FHYD Cast Iron Centrifugal Pump. 14.5 GPM Hydraulic Motor. Inlet 220 Full Port Flange & 1-1/2” NPT Outlet 200 Standard Port Flange & 1-1/4” NPT. 170 GPM & 160 PSI. Single Mech. Seal. Wt. 43 lbs.. 1495.44 AC FMC650FHYDWS Same as Above but with Oasis™ Double Wet Seal....... 2119.88 AC FMC750FHYDM22 Cast Iron Centrifugal Pump. 18 GPM Hyd. Motor. 300 Series Flanged Suction x 220 Series Flanged Discharge. 280 GPM & 150 PSI. Oasis™ Double Wet Seal. Wt. 70 lbs......................................................... 2725.56 AC FMC750FHYDM25 Cast Iron Centrifugal Pump. 20 GPM Hyd. Motor. 300 Series Flanged Suction x 220 Series Flanged Discharge. 290 GPM & 150 PSI. Oasis™ Double Wet Seal. Wt. 70 lbs..................................................... 2725.56 Replacement Seals AC BAC-7-650 Single Viton® / Carbon / Ceramic Seal for 650.............. $ 87.10 AC BAC-7-650-WS Double Wet Seal for 650WS........................................... 175.21 AC BAC-7-750V Double Wet Seal for 750................................................ 203.68 Inlet Air (Schrader Valve)

2744.32

2138.64

2899.76

• Valve Manifold • Implement Wire Harness

Air Regulator (Set at 30 PSI Max.)

• Hydraulic Return Tee & Adapter for Load Sense (LS) Port Features: Operate two pumps independently • Supply oil from one tractor remote or power beyond circuit • Two Modes of Operation: Manual Mode that has independent on/off operation from the cab with independent manual flow adjustment at the hydraulic manifold and PWM Mode that has independent pump regulation with PWM signal from the rate controller (Rate controller not included) • Use with any ACE pump equipped with the 204 or 206 Motor.

• Excellent Visibility & Easy Service Regardless of Pump Location • Provides Extra Barrier Fluid for Extended Service Intervals

Part No. AC 45281 AC 55032

2043.50

Includes: • Switch Box Assembly

• Use with Oasis WetSeal™ Technology On Pump Models: - FMCWS-650 Models - FMC-750F Models - FMC-850F Models

6’ Tubing to Pump Seal (Included)

$ 1902.80 2599.60

Dual Hydraulic Pump Control System

External Reservoir

RETAIL

• Regulator & Gauge Assures Ideal Air Pressure At All Times • Comes with (1) Quart of “Royal Purple” Seal Barrier Fluid

Once installed on a planter or sprayer, it allows operators to quickly and easily dial-in separate application rates for liquid fertilizers, herbicides, pesticides and other crop inputs.

Description RETAIL External Reservior with “Royal Purple” Seal Barrier Fluid....................................... $ 424.78 Replacement Quart of Seal Barrier Fluid... 48.24

Part No. Description RETAIL AC DPK ACE Gemini Hydraulic Pump Control Kit....... $ 1633.46 AC DPK-EXT 22 Ft. Extension Cable for Above Kit.............. 89.78

Viton® is a registered trademark of DuPont Performance Elastomers

DULTMEIER SALES • OMAHA, NE

(800) 228-9666

•

www.dultmeier.com

• DAVENPORT, IA

(800) 553-6975

E0805

Centrifugal Sprayer Pumps PTO Drive Centrifugal Sprayer Pumps • • • • • •

Hydraulic Motor Drive Centrifugal Sprayer Pumps

replaced Viton®

Easily mechanical seal ABS Plastic Belt & Shaft Guard Spring loaded Idler to maintain Standard & proper belt tension High Cast Iron construction Performance Sealed ball bearing Models 10-groove poly V-Belt

Power Take-Off Mounted

Flanged Ports

STANDARD PUMPS 1-1/4" inlet x 1" discharge

HIGH PERFORMANCE

150 SERIES 1-1/2" X 1-1/4" 100 PSI - 40 GPM at 600 RPM Due to Increased pulley ratio and 1-1/2" inlet x 1-1/4" Discharge ports Part No. AC PTOC600-10QC AC PTOC1000-10 AC PTOC1000-175

PTO RPM PRESSURE CAPACITY HP 600 60 PSI 20 GPM 1200 GPH 1-1/4 or 40 PSI 50 GPM 3000 GPH 2 1000 30 PSI 60 GPM 3600 GPH 2-1/4 * Data based on 1 foot lift through unrestricted suction hose and fittings with full 1-1/4" I.D.

150 SERIES PERFORMANCE CHART TRACTOR 450 500 540 600 PTO SPEED RPM RPM RPM RPM PSI GPM GPM GPM GPM 20 70 80 95 100 30 55 75 90 100 40 40 65 85 95 50 25 55 80 90 60 10 45 70 80 70 - 25 65 75 80 - 10 55 65 90 - - 30 55 100 - - - 40

Standard Pumps

RETAIL Direct Mount on 1-3/8" 600 RPM PTO Shaft. 6-Spline Quick Coupler PTO Drive Shaft. Wt. 46 lbs.. $ 1098.80 Direct Mount on 1-3/8" 1000 RPM PTO Shaft. 21-Spline split PTO shaft & Split ring Locking Collar. Wt. 43 lbs.................................................... 1102.82 Direct Mount on 1-3/4" 1000 RPM PTO Shaft. 20-Spline Split PTO drive shaft & Split ring Locking Collar. Wt. 45 lbs...................................... 1144.36

High Performance Pumps RETAIL Part No. AC PTOC150-6SPQC Direct Mount on 1-3/8" 600 RPM PTO Shaft. Equipped with Quick Coupler. Wt. 51 lbs............... $ 1232.80 AC PTOC150-21SP Direct Mount on 1-3/8" 1000 RPM PTO Shaft. 21-Spline PTO Shaft & Locking Collar. Wt. 48 lbs.. 1236.82 AC PTOC150-20SP Direct Mount on 1-3/4" 1000 RPM PTO Shaft. 20-Spline PTO drive shaft & Locking Collar. Wt. 50 lbs.. 1278.36 AC PTOC150-600B 1" Dia. Stub Shaft & integral Mounting Base for 600 RPM Tumblerod Drive Shaft. Wt. 52 lbs......... 1232.80 AC PTOC150-1000B 1" Dia. Stub Shaft & Integral Mounting Base for 1000 RPM Tumblerod Drive Shaft. Wt. 45 lbs....... 1232.80 Part No. AC R600 AC FMC-MIA AC FMC150MIA

Repair Pumps/Kits for Above Pumps RETAIL Repair Kit Includes seal, two o-rings, bearings, snap rings, & slinger. For PTO and hydraulic std.& high press. series Ace Pumps.. $ 70.35 Replacement Pump only, machined for idler arm for PTOC Standard Units. Wt. 18 lbs............. 455.60 Replacement Pump Only, machined for idler arm PTO 150 Series, Wt. 18 lbs........................... 458.28

*8-Groove Poly V-Belts were used by ACE prior to their 1972 Models which use the 10-Groove Poly V-Belt.

Cast Iron Straight Centrifugal Frame Mounted Pumps are driven by a close coupled hydraulic motor. The hydraulic motors have built in reverse check valves to prevent seal damage due to impeller coasting and reverse rotation. Each motor also has an integral needle valve to by-pass excess hydraulic fluid on open center systems. Valox Impeller; Cast Iron optional. Stainless shafts and wear rings. Standard Viton® mechanical seals. Note: For severe duty seal (silicon carbide) add suffix “A” to pump number shown. PUMP NO. & PORT SIZE

MAX. Press. & MAX. GPM

HYD. MOTOR Can be Used on Hydraulic Systems:

FMC-HYD-202 70 GPM 2 GPM Turf & Golf Course Units with LS 1-1/4" x 1" 100 PSI @ 4600 RPM Closed and Open Centered Systems FMC-HYD-203 80 GPM 3 GPM rated at 2-11 GPM FMC-HYD-204 100 PSI @ 4600 RPM 4 GPM Pressure Compensating Closed Center 1-1/4” x 1” FPT 60 GPM (John Deere), or Open Centered Systems rated at 4-13 GPM FMC-HYD-210 100 PSI @ 4600 RPM 10 GPM Load Sensing Closed Center Systems 1-1/4" x 1" FPT 60 GPM (Case-IH type) or Open Centered Systems rated at 10-17 GPM FMC-HYD-310 60 PSI @ 3950 RPM 16 GPM Open Center Systems Rated at 16-24 GPM 1-1/4" x 1" FPT 60 GPM FMC150HYD206 120 PSI @ 5100 RPM 7 GPM Pressure Compensating Closed Center 1-1/2" x 1-1/4" FPT 120 GPM Systems (John Deere type), Load Sensing Closed Center Systems (Case-IH type), FMC150FHYD206: and Open Center systems rated 7-16 GPM Inlet: 220 FP Flange / 1-1/2” FPT Equipped with restrictor orifice. Outlet: 200 SP Flange / 1-1/4” FPT FMC150HYD206A Same as FMC150HYD206 with Silicon Carbide Seal FMC200HYD210 80 PSI @ 3950 RPM 10 GPM Pressure Compensating Closed Center 2" x 1-1/2" 180 GPM Systems (John Deere type), Load Sensing Closed Center Systems (Case-IH type), and Open Center systems rated 10-17 GPM. Equipped with restrictor Orifice. FMC200HYD304 120 PSI @ 5100 RPM 11 GPM Pressure Compensating Closed Center 2" x 1-1/2" FPT 200 GPM Systems, Load Sensing Closed Center FMC200HYD304S Same as FMC200HYD304 but Stainless Systems, & Open Center Systems rated at 11-20 GPM. Equipped with restrictor orifice. FMC200FHYD304: Inlet: 3” SP Flange. Outlet: 220 FP Flange See Following Pages for Hydraulic Oil Flow Limiting Valves

* 316 Stainless Steel. ** Pump Only for FMC-HYD-204,-210,-203,-206. † With Silicon Carbide Seal.

Viton® is a registered trademark of DuPont Performance Elastomers

(800) 228-9666

FPT Ports

Centrifugal Pump - Hydraulic Motor Combination

ACE Pump Parts

DULTMEIER SALES • OMAHA, NE

Part No. Ports Motor Wt. RETAIL AC FMC-HYD-202 1-1/4" x 1" 202 25 lbs. $ 967.48 AC FMC-HYD-203 1-1/4" x 1" 203 25 lbs. 967.48 AC FMC-HYD-204 1-1/4" x 1" 204 26 lbs. 955.42 AC FMC-HYD-210 1-1/4" x 1" 210 27 lbs. 955.42 AC FMC-HYD-310 1-1/4" x 1" 310 33 lbs. 974.18 AC FMC-HYD-LM ** 1-1/4” x 1” Pump Less Motor....... 530.64 AC FMC150HYD206 1-1/2" x 1-1/4" 206 31 lbs. 978.20 AC FMC150HYD206A †1-1/2" x 1-1/4" 206 31 lbs. 1050.56 AC FMC150FHYD206 FPT & Flanged 206 31 lbs. 1023.76 AC FMC150FSHYD *FPT & Flanged 206 31 lbs. 1727.26 AC FMC200HYD210 2" x 1-1/2" 210 33 lbs. 1149.72 AC FMC-150-HYD-LM 1-1/2” x 1-1/4” 150HYD206 Pump Less Motor 554.76 AC FMC200HYD304 2" x 1-1/2" 304 38 lbs. 1153.74 AC FMC200HYD304S *2” x 1-1/2” S.S. 304 38 lbs. 1553.06 AC FMC200FHYD304 3” Flg. x 2” FP Flg. 304 38 lbs. 1259.60 AC FMC205FHYD304 †3” Flg. x2” FP Flg. 304 38 lbs. 1331.96 AC 41374 200 Series Hydraulic Motor Repair Kit - New 11/99 59.63 AC 41362 300 Hydraulic Motor Repair Kit .......................... 96.48 AC RK-FMC Repair Kit for FMC Series - Viton® Seal, Washer, O-Ring 50.52

Part No. For Standard Pumps RETAIL AC BAC-28-10 10-Groove Poly V-Belt For PTOC-600-10 Pump. $ 25.80 AC BAC-28-10M 10-Groove Poly V-Belt For PTOC-1000-10 Pump 23.79 AC BAC28-10M150 10-Groove Belt. For PTOC-15-1000 Pump......... 59.63 AC BAC28-10150 10-Groove Belt. For PTOC-150-600 Pump......... 58.69 AC BAC-28-8 *8-Groove Poly V-Belt For PTOC-600 Pump...... 22.71 AC BAC-7V Carbon-Ceramic Viton® Seal............................. 42.21 AC BAC-4 Gasket (Not in R600).......................................... 4.05 AC BAC-4-150 O-Ring - High Pressure Pumps.......................... 8.11 AC BAC-7SC Silicon-Carbide Viton® Seal (Severe Duty)........ 156.45 AC BAC-8 “O” Ring for BAC-6SS......................................... 1.07 AC BAC-6SS 5/8" Driven Shaft. Left Hand Thread “SS” Steel.. 115.91 AC BAC-37 Sealed Ball Bearing. For BAC-6SS Driven Shaft 5.39 AC BAC-5 Idler Torsion Spring............................................. 22.24

IND

145

•

www.dultmeier.com

• DAVENPORT, IA

(800) 553-6975

E0233

Centrifugal Sprayer Pumps

146

Pedestal Pumps

Counter-Clockwise Rotation Frame Mounted Pumps (Facing the Shaft)

Clockwise Rotation

Dependable, Low Cost Pumps for use on self propelled sprayers or mounted on base for electric motor. Sealed ball bearings and readily replaceable mechanical seals. Easily handles abrasive wettable powders.

Clockwise rotation when facing the shaft for use with gasoline engine drive. Discharge port may be repositioned to accommodate plumbing. Viton® seal, Valox impeller, iron construction. Cast iron impeller and silicon carbide seals available for heavy duty use. Not for use with mag clutches.

Model FMC-MIA is machined to accept an idler arm and can be used as a replacement pump for the PTOC series belt driven PTO pumps. It will also accept the after market 12-volt clutch shown below. Cast Iron impeller is optional. Not for use with mag clutches.

Performance @ 3450 RPM Data based on 1 foot suction lift through unrestricted suction hose and fittings. FMC-CW-150 1-1/2" x 1-1/4" 5200 RPM Max.

FMC-CW-200 2" x 1-1/2" 4600 RPM Max.

IMPELLER SHAFT Part No. PORTS MATERIAL SIZE PERFORMANCE AC FMC-MIA 1-1/4" x 1" Valox 5/8" 100 PSI @ 6000 Max. RPM 60 GPM at open discharge AC FMC150MIA 1-1/2" x 1-1/4" Valox 5/8" 175 PSI @ 6000 Max. RPM 100 GPM at open discharge AC FMC200 2" x 1-1/2" Valox 5/8" 60 PSI @ 4600 Max. RPM 180 GPM at open discharge *AC FMC200X 2" x 1-1/2" Valox 3/4" 60 PSI @ 4600 Max. RPM 180 GPM at open discharge

FMC-CW-800 2" x 1-1/2" 4200 RPM Max.

PRESSURE CAPACITY H.P. CAPACITY H.P. CAPACITY H.P. 45 PSI 20 GPM 1.0 60 GPM 3.5 160 GPM 7.5 35 PSI 30 GPM 1.5 85 GPM 4.0 170 GPM 7.5 25 PSI 55 GPM 2.0 110 GPM 4.5 170 GPM 7.5 10 PSI 60 GPM 2.5 120 GPM 5.0 180 GPM 7.5 Part No. Shaft FPT Ports Wt. RETAIL AC FMC-CW-150 Pump Only 5/8" 1-1/2" x 1-1/4" 20 lbs. $ 447.56 AC FMC-CW-200 Pump Only 5/8" 2" x 1-1/2" 24 lbs. 590.94 AC FMC-CW-800 Pump Only 7/8" 2" x 1-1/2" 42 lbs. 1223.42

Part No.

12-Volt Magnetic Clutches

Part No. Description Wt. RETAIL AC FMC-CW-MAGD 1-1/4” x 1” CW Pump................................. 24 lbs. $ 848.22 AC FMC-CW150MAGD 1-1/2" x 1-1/4" CW Pump.......................... 25 lbs. 852.24 AC FMCCW150MGDX3 1-1/2" x 1-1/4" HD CW Pump, 3/4" Shaft †... 25 lbs. 897.80 AC 47255 1-1/2" x 1-1/4" HD CW Pump with 3/4" Shaft & Silicon Carbide Seal †........... 25 lbs. 968.82 AC FMC-CW200MAGD 2" x 1-1/2" CW Pump................................. 45 lbs. 1038.50 AC FMC-CW800MAGD 2" x 1-1/2" CW Pump................................. 45 lbs. 2081.02 AC FMC-150MAGD 1-1/2" x 1-1/4" CCW Pump *..................... 25 lbs. 852.24 AC FMC-200MAGD 2" x 1-1/2" CCW Pump *............................ 45 lbs. 1038.50 * Available in a flanged version IE FMCF †. Special for Spray Coupe

The MAGNI-CLUTCH mounts directly to the pump, and is powered by a 12-volt D.C. Draws only 2 amps. Units are supplied with adaptors for Ace FMC mag drive or Hypro 9200 Series pumps. MCH2 Heavy Duty Clutch Features: Heavy duty bearing • Higher torque - 30 ft./lbs. • Transmits up to 23 HP @ 4000 RPM • Single radial sealed ball bearing • 5/8” bore x 5” pulley. Pully Shaft Magnet Adapter SI-NO. Dia. Dia. Dia. Hub I.D. Application MC12-AC 5" 5/8" 3.975" 1.812" Ace FMC MAG MC12-HY 5" 5/8" 3.975" 2.075" Hypro 9200 MCH2 5" 5/8" 5.585" 2.075" Hypro 9200 Note: Adapter hub attaches to pump housing with set screws. *MCH2 has 5.585"Dia. Magnet for heavy duty 9200 applications

FMC75HYD Series

Flow Limiter Valves

Replace 12 volt diaphragm pumps and roller pumps with this reliable new polypropylene model designed for starter fertilizer and small sprayer applications. The performance is ideal for low flow rate in-furrow chemical applications without the excess flow and heat of larger pumps. Features: Has corrosion resistance of a polypropylene wet end. • 25 GPM • Maximum 100 PSI • Connections are 1” x 3/4” • Viton® Seal.

Part No. Size Motor Req. Pump Wt. AC FMC75HYD204 1" x 3/4" 4 GPM Pump with Std. Viton® Seal 13 lbs. AC FMCSC75HYD204 1” x 3/4” 4 GPM Pump with Sil-Carbide Seal 17 lbs. AC FMC75HYD206 1” x 3/4” 7 GPM Pump with Std. Viton® Seal 13 lbs. AC FMC75SPHYD204 1” x 3/4” 4 GPM Pump, Self-Priming 19 lbs. AC FMC75SPHYD206 1” x 3/4” 7 GPM Pump, Self-Priming 19 lbs. AC RKGE75 Viton® Pump Repair Kit............................................................

MC12 MAGNI-CLUTCH 5-1/4 O.D. x 5/8" Bore 10 HP @ 4000 RPM

MCH2 Heavy Duty Clutch

Part No. 12-VOLT MAGNETIC - CLUTCHES Wt. RETAIL SI MC12-AC For ACE FMC Pump......................................... 4.5 lbs. $ 328.30 SI MC12-HY For HYPRO C9200 Pump................................. 4.5 lbs. 467.66 SI MCH2 For 9200 HYPRO Heavy Duty Applications...... 4.5 lbs. 628.46

Hydraulic Motor Driven Poly Centrifugal Pumps

RETAIL

18 lbs. $ 455.60 23 lbs. 458.28 24 lbs. 590.94 24 lbs. 636.50

* FMC200X is heavy duty version with 3/4" shaft.

Magnetic Clutch Driven Pumps Cast Iron Pedestal Style Pumps with a double groove machined steel pulley and 12 Volt clutch. Available in CW or CCW rotation (when facing pulley side). Viton® seal, Valox impeller. See above for performance data. Silicon carbide seals and cast iron impeller available for heavy duty use.

Wt.

AC FMC-MIA AC FMC150MIA AC FMC200 AC FMC200X

RETAIL $ 787.92 865.64 787.92 787.92 787.92 58.69

Part No. AC LS204 AC LS206 AC LS210 AC LS304

Flow Limiting Valves should be used on hydraulic motor pumps to prevent motor damage. Use on load sensing (pressure and flow compensated systems) closed center systems. Install in inlet port. Shuts off all hydraulic flow when the motor's capacity is exceeded. Automatically resets. Protects motor from overspeeding. Sized for ACE hydraulic pumps.

Description 3/8” MPT x 3/8” FPT for 204 Motors 3/8” MPT x 3/8” FPT for 206 Motors 3/8” MPT x 3/8” FPT for 210 Motors 1/2” MPT x 1/2” FPT for 304 Motors

RETAIL $ 70.35 71.02 70.35 79.06

Viton® is a registered trademark of DuPont Performance Elastomers

DULTMEIER SALES • OMAHA, NE

(800) 228-9666

•

www.dultmeier.com

• DAVENPORT, IA

(800) 553-6975

E0234

Hydraulic Centrifugal Sprayer Pumps Threaded Hydraulic Drive Centrifugal Pumps

Flanged Hydraulic Drive Centrifugal Pumps

• • • • • • •

9303 & 9306 Series • Cast Iron • Stainless

9303 & 9306 Series • Cast Iron • Stainless Features:

Available in Cast Iron & 316 Stainless Steel Hydraulic Motor Drive (for open center, closed center & load-sensing systems) 1-1/2” NPT Inlet, 1-1/4” NPT Outlet or 2” x 1-1/2” Temperatures to 140° F. Impeller: Cast Iron Models are Nylon & Stainless Steel Models are Polypropylene Hydraulic Motor is Internal Gear Gerotor Cast Iron Models have Viton®/Ceramic Seals & Stainless Steel Models have Life Guard® Silicon Carbide Seals • Maximum Motor PSI is 3000 9303C Cast Iron 9303S Stainless

114 130 13 GPM Open/Closed 97 95 6 GPM Open/Closed 125 98 24 GPM Open/Closed 115 93 7 GPM Open/Closed 147 145 16 GPM Open/Closed 207 130 13 GPM Open/Closed 214 135 24 GPM Open/Closed 212 140 17 GPM Open/Closed Seal and O-ring Repair Kit Life Guard® Silicon Carbide Seal Kit

Hydraulic Selection System

Features: • • • • • •

Available in Cast Iron & 316 Stainless Steel Hydraulic Motor Drive (for open center, closed center & load-sensing systems) Temperatures to 140° F. Impeller: Cast Iron Models are Nylon & Stainless Steel Models are Polypropylene Hydraulic Motor is Internal Gear Gerotor Cast Iron Models have Viton®/Ceramic Seals & Stainless Steel Models have Life Guard® Silicon Carbide Seals • Maximum Motor PSI is 3000 • Cast Iron Pumps are also FPT. Performance Specifications are in chart at left.

Cast Iron & Stainless Steel Flanged Connection - SilCarbide Seals

Part No. Material Flange Size* Wt. RETAIL HY 9306C-HM1C-B3U Cast Iron 300x220 33 lbs. $ 1417.72 HY 9306C-HM3C-B3U Cast Iron 300x220 33 lbs. 1478.02 HY 9306C-HM5C-B3U Cast Iron 300x220 37 lbs. 1416.38 HY 9306S-HM1C-3U Stainless 300x220 33 lbs. 2307.48 HY 9306S-HM3C-3U Stainless 300x220 33 lbs. 2371.80 HY 9306S-HM5C-3U Stainless 300x220 33 lbs. 2306.14 * 300 x 220 = 3” x 2” Full Port

Accessories

Part No. HY 3430-94 HY 3430-0748 HY 3430-0332

Cast Iron Threaded Connection - Viton® Seals

Part No. Material Size Wt/Lbs. RETAIL HY 9303C-HM1 Cast Iron 1-1/2” x 1-1/4” 26 $ 1014.38 HY 9303C-HM2 Cast Iron 1-1/2” x 1-1/4” 26 1013.04 HY 9303C-HM3 Cast Iron 1-1/2” x 1-1/4” 26 1072.00 HY 9303C-HM4 Cast Iron 1-1/2” x 1-1/4” 28 1013.04 HY 9303C-HM5 Cast Iron 1-1/2” x 1-1/4” 26 1013.04 HY 9306CHM1C Cast Iron 2” x 1-1/2” 33 1171.16 HY 9306CHM3CB * Cast Iron 2” x 1-1/2” 32 1335.98 HY 9306CHM5CB * Cast Iron 2” x 1-1/2” 32 1274.34 * Silicon-Carbide Seals.

Description RETAIL Hydraulic Motor Kit for 9200..................... $ 13.20 Hydraulic Motor Kit for 9300..................... 77.72 Repair Kits for 92/93/94 Cast Iron Pumps. 56.28

Hydraulic Driven Cast Iron Pump High Volume 9307CWS-GM12U

• • • •

Port Sizes: 3” x 2” FPT or Flanged Silicon Carbide Seal Hydraulic Motor: Internal Gerotor Hydraulic Ports: 7/8” Inlet & 1-1/6” Outlet SAE Straight-thread ports O-ring Boss. • GM10 is 16-20 GPM Hydraulic & GM12 is 16-23 GPM Hydraulic • Maximum Motor PSI: 3000 Continuous Duty • Requires 20 GPM Oil @ 3,000 PSI for High Volumes • 316 Stainless Impeller

Stainless Steel Threaded Connection - SilCarbide Seals Part No. HY 9303SHM1 HY 9303SHM3C HY 9303SHM4 HY 9303SHM5 HY 9306SHM1C HY 9306SHM3C HY 9306SHM5C

Material Stainless Stainless Stainless Stainless Stainless Stainless Stainless

Size 1-1/2” x 1-1/4” 1-1/2” x 1-1/4” 1-1/2” x 1-1/4” 1-1/2” x 1-1/4” 2” x 1-1/2” 2” x 1-1/2” 2” x 1-1/2”

Wt./Lbs. RETAIL 38 $ 1842.50 26 1913.52 26 1842.50 28 1859.92 33 2160.08 38 2227.08 33 2160.08

Life GuardTM

Hyd. Flow GPM

Silicon Carbide Seals Standard seal in all Hypro stainless centrifugal pumps. 8X life with abrasive solutions over ceramic. A run dry survivability over ceramic. This is a superior seal which will provide outstanding performance. For any pump listed with a silicon carbide seal option, add suffix B. Price adder approximately $53 with new pumps. Seal kits include seal and o-ring. Part No. HY 3430-0589 HY 3430-0590 HY 3430-0591 HY 3430-0593 HY 3430-0601

Cast Iron

Stainless Steel

Part No. Material Flange Size* Wt. RETAIL HY 9303C-HM1CU Cast Iron 220X200 30 lbs. $ 1051.90 HY 9303C-HM3CU Cast Iron 220X200 26 lbs. 1163.12 HY 9303C-HM5CU Cast Iron 220X200 26 lbs. 1053.24 HY 9306CHM1CU † Cast Iron 220X220 33 lbs. 1307.84 HY 9306CHM3CU Cast Iron 220X220 38 lbs. 1344.02 HY 9306CHM5C-BU † Cast Iron 220X220 37 lbs. 1311.86 * 200 x 220 = 2” x 2” Full Port. † With SC Seal.

Order Information

9303-HM1 9303-HM2 9303-HM3 9303-HM4 9303-HM5 9306-HM1 9306-HM3 9306-HM5 3430-0332 3430-0589

Cast Iron Flanged Connection - Viton® Seals

Max. Max. Max. GPM PSI Hyd. GPM

Model #

147

GPM @ 30 PSI

GPM @ 40 PSI

GPM @ GPM @ GPM @ GPM @ Chart Values 50 PSI 60 PSI 70 PSI 80 PSI are for Water with GM10 346 318 291 258 222 166 Motor. GM102Slightly 361 361 338 311 281 250 370 370 351 328 301 275 Higher

16 282 253 219 168 73 18

19 20

Hydraulic Cast Iron Pumps Max. Max. Max. Max. Wt. Part No. Connections Oil Temp. GPM PSI Lbs. RETAIL HY 9307C-GM10 3” x 2” FPT 20 140° F. 370 135 86 $ 4742.26 HY 9307C-GM10-U 3” x 2” Flanged 20 140° F. 370 135 86 4785.14 HY 9307C-GM12 3” x 2” FPT 23 140° F. 370 135 86 4742.26 HY 9307C-GM12-U 3” x 2” Flanged 23 140° F. 370 135 86 4785.14 HY 9307CWS-GM12U *3” x 2” Flanged 20 140° F. 370 135 86 5353.30 HY 3430-0604 Silicon Carbide Seal Kit........................................ 448.90 * Wet Seal Design

Silicon Carbide Seal Kits RETAIL For 9200, 9300, 9400 Pumps............. $ 203.68 For 9000P Pumps............................... 231.82 For 9000 Series Pumps...................... 213.06 For 9300P, 9400P, 9500P Pumps....... 221.10 For 9305C Pumps Only ..................... 205.02

Viton® is a registered trademark of DuPont Performance Elastomers

IND

DULTMEIER SALES • OMAHA, NE

(800) 228-9666

•

www.dultmeier.com

• DAVENPORT, IA

(800) 553-6975

E0237

ForceField® Pumps

148

9310 Series ForceField® Centrifugal Pumps Superior Wet Seal Protection. Protects the mechanical seal against common failures related to dry run and chemical bonding by using a barrier fluid to keep it cool and lubricated. 9313 Series ForceField® Centrifugal Pumps (1-1/2” x 1-1/4”) & 220 x 200 Flanged Current Product Size Part No. Equivalent Inlet

9313C

9313S

9314C

Size Outlet

Max. GPM

Max. Hyd. Max. Wt./ GPM PSI Lbs

HY 9313C-M04 9303C-HM2C 1-1/2” 1-1/4” 140 HY 9313CU-M04 9303C-HM2C-U 220x200 Flange 140 HY 9313C-M05 9303C-HM4C 1-1/2” 1-1/4” 155 HY 9313CU-M05 9303C-HM4C-U 220x200 Flange 155 HY 9313C-M08 9303C-HM1C 1-1/2” 1-1/4” 188 HY 9313CU-M08 9303C-HM1C-U 220x200 Flange 188 HY 9313C-M10 9303C-HM5C 1-1/2” 1-1/4” 197 HY 9313CU-M10 9303C-HM5C-U 220x200 Flange 197 HY 9313C-M16 9303C-HM3C 1-1/2” 1-1/4” 194 HY 9313CU-M16 9303C-HM3C-U 220x200 Flange 194 HY 9313S-M04 9303S-HM2C 1-1/2” 1-1/4” 140 HY 9313SU-M04 9303S-HM2C-U 220x200 Flange 140 HY 9313S-M05 9303S-HM4C 1-1/2” 1-1/4” 155 HY 9313SU-M05 9303S-HM4C-U 220x200 Flange 155 HY 9313S-M08 9303S-HM1C 1-1/2” 1-1/4” 188 HY 9313SU-M08 9303S-HM1C-U 2 20x200 Flange 188 HY 9313S-M10 9303S-HM5C 1-1/2” 1-1/4” 197 HY 9313SU-M10 9303S-HM5C-U 2 20x200 Flange 197 HY 9313S-M16 9303S-HM3C 1-1/2” 1-1/4” 194 HY 9313SU-M16 9303S-HM3C-U 220x200 Flange 194

7 7 8 8 13 13 16 16 20 20 7 7 8 8 13 13 16 16 20 20

RETAIL

90 40 $ 1571.82 90 40 1670.98 100 40 1573.16 100 40 1670.98 137 40 1680.36 137 40 1689.74 150 40 1697.78 150 40 1767.46 103 40 1711.18 103 40 CALL 90 40 CALL 90 40 CALL 100 40 2405.30 100 40 2401.28 137 40 2426.74 137 40 2445.50 150 40 2406.64 150 40 CALL 103 40 CALL 103 40 CALL

For Case Drain Hydraulic Motor, Add Suffix “Y” (i.e. 9313C-M04Y)

9314 Series ForceField® Centrifugal Pumps (2” x 1-1/2”) & 220 x 220 Flanged

Current Product Size Part No. Equivalent Inlet

Size Outlet

HY 9314C-M08

1-1/2” 227

HY 9314CU-M08

9306C-HM1C 9306C-HM1C-U

HY 9314C-M10 HY 9314CU-M10

9306C-HM5C 9306C-HM3C

HY 9314SU-M08

9306S-HM1C

HY 9314SU-M10

9306S-HM5C

1-1/2” 233

2”

1-1/2” 232

2”

1-1/2” 227

2”

1-1/2” 233

RETAIL

132 40 $ 1762.10 CALL

132 40

150 40 1744.68

150 40 1784.88

138 40 1798.28

138 40

CALL

132 40

CALL

132 40

CALL

150 40

CALL

150 40

CALL

1-1/2” 232

138 40

CALL

9306S-HM3C-U 220x220 Flange 232

138 40

CALL

9306S-HM5C-U 220x220 Flange 233

HY 9314S-M16 HY 9314SU-M16

2”

9306S-HM1C-U 220x220 Flange 227

HY 9314S-M10 D

2 20x220 Flange 227

9306C-HM3C-U 220x220 Flange 232

HY 9314S-M08 9314S

Max. Hyd. Max. Wt./ GPM PSI Lbs

9306C-HM5C-U 220x220 Flange 233

HY 9314C-M16 HY 9314CU-M16

2”

Max. GPM

9306S-HM3C

2”

For Case Drain Hydraulic Motor, Add Suffix “Y” (i.e. 9313C-M04Y) 9316C

9316 Series ForceField® Centrifugal Pumps (300 x 220 Flanged) Current Product Size Part No. Equivalent Inlet D

Size Outlet

Max. Max. Hyd. Max. GPM GPM PSI

Wt./ Lbs

RETAIL

HY 9316C3U-M08

9306C-HM1C-3U 300x220 Flange

286

127

40 $ 1843.84

HY 9316C3U-M10

9306C-HM5C-3U 300x220 Flange

311

150

HY 9316C3U-M16

9306C-HM3C-3U 300x220 Flange

307

128

CALL

HY 9316S3U-M08

9306S-HM1C-3U 300x220 Flange

286

127

2960.06

HY 9316S3U-M10

9306S-HM5C-3U 300x220 Flange

150

CALL

HY 9316S3U-M16

9306S-HM3C-3U 300x220 Flange

307

128

CALL

For Case Drain Hydraulic Motor, Add Suffix “Y” (i.e. 9313C-M04Y)

ForceField® Replacement Fluid D

9316S

IND

Part No. Description

RETAIL

HY 2160-0096

$ 55.61

DULTMEIER SALES • OMAHA, NE

(800) 228-9666

Replacement Fluid for ForceField® Seal Chamber, 23 oz..........

•

www.dultmeier.com

• DAVENPORT, IA

(800) 553-6975

E1163

Centrifugal Sprayer Pumps 9000 Series PTO Drive Centrifugal Pumps

Pedestal Mount Centrifugal Pumps

- Cast Iron -

Series 9000 Pumps feature a planetary oil lubricated gear drive, Viton® seals, a glass-filled nylon impeller with a stainless wear ring, and CCW pump shaft rotation. Uses 90 wt. gear lube. Series 9040C includes a parallel helical oil lubricated gear drive, Viton® seals and a glass-filled nylon impeller with a stainless wear ring. 140° F. maximum.

Max. Max. Max. Wt. Part No. Description GPM PSI RPM Lbs. RETAIL HY 9006C Pump with 1-3/8" 540 rpm PTO hub & locking collar. 1-1/2" x 1-1/4"...................... 117 80 540 44 $ 1098.80 HY 9008C Pump with 1-3/8" 1000 rpm PTO hub & locking collar. 1-1/2" x 1-1/4"...................... 110 70 1000 45 1165.80 HY 9016C Pump with 1" solid shaft. 1-1/2" x 1-1/4".... 117 80 540 41 1084.06 HY 9018C Pump with 1" solid shaft. 1-1/2" x 1-1/4".... 110 70 1000 42 1148.38 HY 9028C Pump with 1-3/4" 1000 rpm PTO hub & locking collar. 1-1/2" x 1-1/4"...................... 110 70 1000 48 1353.40 HY 3430-0591 Silicon Carbide Seal Kit (severe duty)................................ - 213.06 DU R90 Repair Kit........................................................................... - 246.56 HY 3430-0333 Viton® Seal........................................................................ - 67.67 Note: Cast Iron Pumps available with Silicone Carbide Seal - Call for Price. Add Suffix B.

Cast Iron & Stainless Series 9200C features a bearing pedestal, Viton® seals, *CCW pump shaft rotation (9203C-R is CW) and a glass-filled nylon impeller with stainless steel wear ring. Maximum fluid temperature is 140° F.

* CCW & CW is determined when looking at shaft end. † S.tainless with silicon carbide seal. Note: Cast iron pumps are availble with silicon carbide seal - Call for Price. Add suffix B.

9203 Series Self-Priming Centrifugal Pedestal Pumps

Self-Priming Centrifugal Pumps

- Cast Iron D

Series 9303C & 9305C feature a hydraulic motor drive (for open and closed center systems) • Internal gear gerotor motor • 1/2” NPT Hydraulic ports • Viton® seals • Glass-filled nylon impeller with stainless steel wear ring • Maximum motor PSI; 2000 continuous duty, 2200 intermediate duty • Double-lip Teflon hydraulic motor seal. Oil Max. Max. Wt. Part No. Description Flow GPM PSI Lbs. RETAIL HY 9303C-HM1CSP For open/closed center systems. 1-1/2”x1-1/4”............ 10 122 130 26 $ 1362.78 HY 9303C-HM2CSP For closed center systems. 1-1/2”x1-1/4”............ 5 104 90 26 1362.78 HY 9303C-HM3CSP For large open center systems. 1-1/2”x1-1/4”............ 20 120 95 26 1484.72 HY 9303C-HM4CSP For closed/open center systems. 1-1/2”x1-1/4”............ 7 99 97 26 1362.78 HY 9303C-HM5CSP For closed/open center systems. 1-1/2”x1-1/4”............ 15 140 140 26 1362.78 HY 9305C-HM3CSP For large open center systems. 2”x2”......................... 20 178 154 59 2290.06

Max. Max. Max. Wt. Part No. Description GPM PSI RPM Lbs. RETAIL HY 9203C-RSP *Pump, with 5/8" shaft. 2" x 2", CW........................... 140 155 5500 38 $ 833.48 HY 9203CSP Pump with 5/8" seal. 1-1/2" x 1-1/4", CCW............ 120 157 5500 38 821.42 HY 9205CSP Pump with 7/8" shaft. 2" x 2" 180 120 3800 48 1758.08 HY 3430-0537 Seal and O-Ring repair kit for 9205C only .......... 1 48.91 * CW & CCW rotation is determined when looking at shaft end.

- Cast Iron Series 9400 PTO Belt Drive includes: • 12-Groove belt drive • Spring-Loaded belt tensioner • Stainless steel wear ring • Stainless steel pump shaft • Viton® seals • Glass-filled nylon or polypropylene impeller with stainless wear ring. Max. Max. Max. Wt. Part No. Description GPM PSI RPM Lbs. RETAIL HY 9403C-540Q Pump, w/1-3/8”, 6 spline quick coupler shaft. 1-1/2”x1-1/4”.. 140 104 600 45 $ 1246.20 HY 9403C-540S Pump, with 1” solid shaft 1-1/2” x 1-1/4”....................... 140 104 600 45 1246.20 HY 94012 * Pump, Special with 1-3/8”, 6 spline, QC Hub, 1-1/4” x 1”. 76 95 1000 42 1088.08 HY 9403C-1000 Pump, with 1-3/8” hollow 21-spline. 1-1/2”x1-1/4”........ 140 104 1000 42 1252.90 HY 9403C-1000L Pump, with 1-3/4” hollow 20-spline. 1-1/2”x1-1/4”........ 140 104 1000 42 1297.12 HY 9403C-1000S Pump, with 1” solid shaft 1-1/2”x1-1/4”......................... 140 104 1000 42 1246.20 * Cushman Replacement.

SERVICE & REPAIRS

Call us at 1-800-228-9666 (Omaha, NE) for a quote!

Viton® is a registered trademark of DuPont Performance Elastomers

(800) 228-9666

Series 9203CSP, 9203C-RSP & 9205CSP SelfPriming pumps include a bearing pedestal, Viton® seals and a glass-filled nylon impeller with stainless steel wear ring. Maximum fluid temperature is 140° F.

9400 PTO Belt Drive Pumps

Did you know? We can service almost every brand of pump we sell in our catalog.

DULTMEIER SALES • OMAHA, NE

Max. Max. Max. Wt. Part No. Description Matl. GPM PSI RPM Lbs. RETAIL HY 9202C Pump with 5/8" shaft. 1-1/4" x 1" CI 105 180 6000 18 $ 451.58 HY 9203C Pump with 5/8" shaft. 1-1/2" x 1-1/4" CI 136 180 6000 19 456.94 HY 9203S Pump with 5/8" shaft. 1-1/2" x 1-1/4" † SS 136 180 6000 19 1035.82 HY 9203C-R CW Pump, w/ 5/8" shaft. 1-1/2" x 1-1/4". CI 136 180 6000 17 467.66 HY 9205C Pump with 7/8" shaft. 2" x 1-1/2" CI 190 190 4200 47 1144.36 HY 9206C Pump with 5/8” shaft. 2” x 1-1/2” CI 225 80 4200 23 597.64 HY 3430-0332 Viton® Seal and O-Ring Repair Kit........................ 3oz. 56.28 HY 3430-0589 Silicon Carbide Seal Kit.......................................... - 203.68 HY 3430-0537 Viton® Seal Kit (9205C pump).............................. - 48.91 HY 3430-0646 Silicon Carbide Seal Kit (9205C pump).................. - 213.06 DU R92 Repair Kit for 9200 pumps.................................... 75.04

Hydraulic Drive

IND

149

•

www.dultmeier.com

• DAVENPORT, IA

(800) 553-6975

E0236

Sprayer • Diaphragm & Bus Pumps

150 MP Pumps

The Best Advanced Circulating Pumps for Transit Buses or School Buses. . .

Engine Drive Straight Centrifugal Pumps For High Pressure Spraying & Water Transfer

These Pumps are Great Performers! They use the standard cast iron series pumps configured for Briggs or Honda engines. Can be purchased as a complete unit or as a wet end kit only for installation on your own engine.

MP Circulator Bus Pumps are highly reliable and proven in many applications around the world. Precision tested materials with consistently high control standards. Transit Bus Pump Features: Pumping capaci ties from 3.7 D GPM to 26 GPM • Unique design allows for high mechanical efficiency at low voltage • Direction of discharge can be at any angle • Hard face mechanical Seal • Series-wound and permanent magnet motors available • Brush life up to 15,000 hours • Easy serviceability. Weight is 9 lbs. School Bus Pump Features: Cover Material and adapter are aluminum with clear anodized coat • Nickel steel impeller • Slip-on hose connections for 1-1/8" hose • Carbon/ceramic seal • Motors are permanent magnet with non-replaceable brushes (estimated service life is 4000 hours) • 12-volt design only • Weight is 4 lbs. Part No. Bus Type Voltage MX 28691 Transit, New Style 24 MX 28987 School Bus 12

1550-SP 1538SP

1550

1537A 1536

HYPRO PERFORMANCE DATA PSI 10 20 30 40 50 60 GPM 104 100 94 82 70 50 PSI 10 20 30 40 50 60 70 GPM 110 106 96 88 80 60 30 PSI 0 10 20 30 40 50 60 70 GPM 150 147 145 140 130 120 107 97 PSI 80 90 100 110 120 130 140 GPM 87 80 69 57 45 36 16

GE1600

Shown with Engine

Base Seal RETAIL None Hard Faced $ 1240.84 Yes Carbon/ceramic 412.72

ACE GE1600 PERFORMANCE DATA Engine Shaft Speed

20 PSI GPM 3900 RPM 280 3500 RPM 280 3200 RPM 280

Diaphragm Pump Units with Honda Engines D

D403 Shown

Diaphragm Pump Units for fertilizer, chemicals and abrasives

These pumps are equipped with a gear-reduction drive that is close coupled directly to the gas engine. Pump runs at 540 RPM. Maximum temperature is 140° F. Pump units include adjustable pressure controls. (Hose, gun, plumbing, battery and cable are not included). Part No. DU 5H-D252GR Hypro Diaphragm Pump Unit with 4.8 HP Honda, Recoil Start, 290 PSI, 6 GPM DU 5H-D30GR Hypro Diaphragm Pump Unit with 4.8 HP Honda, Recoil Start, 580 PSI, 9 GPM DU 5H-D30GRE Hypro Diaphragm Pump Unit with 4.8 HP Honda, 12V Start, 580 PSI,9 GPM DU 5H-D403GR Hypro Diaphragm Pump Unit with 4.8 HP Honda, Recoil Start, 580 PSI,10 GPM DU 5H-D403GRE Hypro Diaphragm Pump Unit with 4.8 HP Honda, 12V Start, 580 PSI,10 GPM DU 8H-D50GR Hypro Diaphragm Pump Unit with 8 HP Honda, Recoil Start, 580 PSI,14 GPM DU 8H-D50GRE Hypro Diaphragm Pump Unit with 8 HP Honda, 12V Start, 580 PSI,14 GPM

Wt.

RETAIL

65 lbs.

1984.54

70 lbs.

2263.26

90 lbs.

2099.78

95 lbs.

2379.84

130 lbs.

2992.22

135 lbs.

3194.56

Part No. AC GE85-LE

Wt. RETAIL ACE Polypropylene Pump for 3/4” Keyed Shaft / Maximum 24 GPM / 65 PSI.............. 5 lbs. $ 245.22

AC GE85SP-LE AC GE85-HONDA

ACE Polypropylene Self-Priming Pump for 3/4” Keyed Shaft / Maximum 24 GPM........... 7 lbs. 285.42 ACE Polypropylene Pump with 3.5 Honda, Maximum 24 GPM / 65 PSI......................... 37 lbs. 1297.12 DULTMEIER SALES • OMAHA, NE

40 PSI GPM 220 220 220

60 PSI GPM 180 175 170

80 100 120 PSI PSI PSI GPM GPM GPM 140 80 0 130 40 0 100 0 —

Part No. Pump Size GPM PSI Wt. RETAIL HY 1536 1-1/2" x 1-1/4" 104 70 5 HP Briggs 54 lbs. $ 1152.40 HY 1537A 1-1/2" x 1-1/4" 110 70 4.8 HP Honda 73 lbs. 1201.98 HY 1538SP5 2" x 2" * 98 60 5.5 HP Honda 80 lbs. 1622.74 HY 1550 2" x 1-1/2" 150 140 9 HP Honda 107 lbs. 2160.08 HY 1550E 2” x 1-1/2” 150 140 9 HP Honda 107 lbs. 2461.58 HY 1550-SP 2” x 2” * 148 130 9 HP Honda 134 lbs. 2887.70 HY 1552C-130B 2” x 1-1/2” † 150 140 13 HP PowerPro 165 lbs. 1947.02 HY 1552C-130E 2” x 1-1/2” 150 140 **13 HP PowerPro 165 lbs. 2307.48 HY 1538 1-1/2" x 1-1/4" Hypro Wet End Pump Only.......... 45 lbs. 527.96 HY 1538SP 2" x 2" * Hypro Wet End Pump Only ......... 65 lbs. 908.52 HY 1551 2" x 1-1/2" Hypro Wet End Pump Only.......... 44 lbs. 1000.98 HY 1551-SP 2” x 2” * Hypro Wet End Pump Only ......... 65 lbs. 1645.52 AC GE800LE 2" x 1-1/2" Ace Wet End Pump Only. Fits 1” Threaded Shaft........................... 40 lbs. 988.92 AC GE1600LE 2-1/2" x 2" Ace Wet End Pump Only. Fits 1” Threaded Shaft........................ 40 lbs. 1286.40 * Self-Priming Model. ** Electric Start. Note: 1538 fits both 1536 & 1537A Pump Units. † No Baseplate Included, but available.

52 lbs. $ 1467.30

Cast Iron Centrifugal Pumps for Gas Drive D

The Less Engine Cast Iron Pumps attach to standard Briggs and Honda pump engines with matching shafts or complete with Honda. Viton® seals Part No. AC GE100ALE AC GE660LE AC GE650LE AC GE860LE AC GE800LE AC GE1600LE DU GE660HE DU GE660HONDA DU GE860HE DU GE860HONDA

Polypropylene Centrifugal Pumps for Gas Engines

IND

1521C-65

PSI 10 20 40 60 80 100 120 GPM 145 141 118 93 71 49 28

Note: Transit Pumps will require inlet & outlet flanges if they are not included in existing system.

Hypro Diaphragm Pump & Engine Units for general purpose ground or tree spraying. Develops pressures to reach mid to upper spray levels. Handles almost any fluid, including abrasives and suspensions with minimal wear.

PSI 10 20 30 40 50 60 GPM 98 87 73 60 44 21

(800) 228-9666

Wt. RETAIL For 3.5 HP, 5/8” UNF Threaded Shaft, Maximum 50 GPM / 50 PSI, 1-1/4” x 1”....... 20 lbs. $ 523.94 For 5.5 HP, 3/4” Keyed Shaft, Maximum 110 GPM / 120 PSI, 1-1/2” x 1-1/4”............. 20 lbs. 490.44 For 5.5 HP, 5/8” UNF Threaded Shaft, Maximum 110 GPM / 120 PSI, 1-1/2” x 1-1/4”.... 27 lbs. 596.30 For 8 HP, 1” Keyed Shaft, Maximum 140 GPM / 140 PSI, 2” x 1-1/2”.................... 29 lbs. 959.44 For 8 HP, 1” UNF Threaded Shaft, Maximum 140 GPM / 140 PSI, 2” x 1-1/2”... 40 lbs. 988.92 For 16 HP, 1” UNF Threaded Shaft, Maximum 280 GPM / 120 PSI, 2-1/2” x 2”... 40 lbs. 1286.40 Ace Pump with 4.8 HP Honda, 12 Volt, 1-1/2” x 1-1/4”.................................. 62 lbs. 1364.12 Ace Pump with 5.5 HP Honda, 1-1/2” x 1-1/4”..... 62 lbs. 1148.38 Ace Pump with 7.9 HP Honda,12 Volt, 2” x 1-1/2” 115 lbs. 2219.04 Ace Pump with 7.9 HP Honda, 2” x 1-1/2”............ 115 lbs. 1999.28 Viton® is a registered trademark of DuPont Performance Elastomers

•

www.dultmeier.com

• DAVENPORT, IA

(800) 553-6975

E0235

Transfer • Sprayer • Motor Pumps

Self-Priming Water Irrigation Pumps

Multi-Stage Centrifugal Pump Units Standard Features: • Cast Iron Bodies, Stainless Shafts. • Impellers: 20% glass-filled thermoplastic precision molded for high efficiencies. • Corrosion-Resistant: Stainless steel wear rings & cover plates. Electro-coated paint process applied inside & out & baked on. • Motor: 3500 RPM, Capacitor type, continuous duty with built in overload with automatic reset. • Easy-to-Service: Can be taken apart for service by removing (4) bolts.

151

Applications: • Water Circulation • Booster Service • Liquid Transfer • Spraying Systems • General Purpose Pumping

Self-Priming Water Sprinkler Pump/Motor Units from G & L Goulds. An ideal choice for Irrigation, Lawn Sprinkling, Water Transfer or Dewatering. Standard Features Include: Cast iron housing with Electro-coated, baked painted finish for added corrosion resistance, (inside and outside of pump body) • Motors are NEMA standard ODP, 60Hz and feature stainless steel shaft & Noryl impeller • Ports are 1-1/2" FPT • Mechanical seal with Buna elastomers is standard • Designed for continuous duty • Single phase motors to 1-1/2 HP are 115/230 volt, 2 & 3 HP are 230 volt • Three phase motors are 230/460 volt and require separate starters • Maximum temperatures to 140° F.

Specifications: • Capacities to 50 GPM • Pressures to 100 PSI • 1-1/4” FPT Suction, 1” FPT Discharge Ports • Temperatures to 180° F. Maximum

For water and other liquids with 1.0 S.G.

GPM Data

Canadian Standards Association Underwriters Laboratories

Part No. GL GT07 GL GT10 GL GT15 GL GT153 GL GT20 GL GT203 GL GT30 GL GT303

Motor Shut-Off Part No. (TEFC) Voltage Flow Rate Pressure Wt. RETAIL GL HSC10C15 1.5hp, 1ph 115-230V 20 gpm @ 53 psi 62 PSI 71 lbs. $ 1294.44 GL HSC10D15 1.5hp, 3ph 230-460V 20 gpm @ 53 psi 62 PSI 61 lbs. 1376.18 GL HSC15C20 2hp, 1ph 115-230V 25 gpm @ 57 psi 70 PSI 70 lbs. 1479.36 GL HSC20D 2hp, 3ph 230-460V 25 gpm @ 73 psi 94 PSI 79 lbs. 1512.86 GL HSC30 * 3hp, 1ph 230V 30 gpm @ 75 psi 100 PSI 84 lbs. 1696.44 GL HSC30B 3hp, 3ph 230-460V 30 gpm @ 75 psi 100 PSI 82 lbs. 1474.00 * These Models Include Open Drip-Proof Motors (ODP)

Motor Max. S.G. Wt. 3/4 HP - 1 Ph. 1.0 48 lbs. 1 HP - 1 Ph. 1.0 52 lbs. 1.5 HP - 1 Ph. 1.0 60 lbs. 1.5 HP - 3 Ph. 1.0 55 lbs. 2 HP - 1 Ph. 1.0 65 lbs. 2 HP - 3 Ph. 1.0 60 lbs. 3 HP - 1 Ph. 1.0 76 lbs. 3 HP - 3 Ph. 1.0 71 lbs.

Thermoplastic Self-Priming Sprinkler Pumps - Sta-Rite “PD” Series -

Motorpump™ DC Motor Driven • • • •

1” x 3/4” FPT Inlet/Outlet Cast Iron Bronze Impeller Motor is Totally Enclosed Non-Ventilated (TENV) • J42 Frame

• • • •

RETAIL $ 625.78 653.92 704.84 755.76 955.42 1033.14 1377.52 1440.50

1/4 HP Maximum PSI is 21 EPDM - Carbon/Ceramic Type 21 Mechanical Seal Maximum 21GPM, 12 GPM @ 9 PSI

U.L. Listed.

Specifications: Body & Base Fiberglass-reinforced thermoplastic Impeller - Engineered polymer Diffuser - Polypropylene Shaft - Stainless Steel

Performance (Capacity in Gallons Per Minute) Disch. PD2HE PD2HF PDHG PDHHG Press. Distance Above Water PSI 5' 10' 15' 20' 25' 5' 10' 15' 20' 25' 5' 10' 15' 20' 25' 5' 10' 15' 10' 25' 10 53 52 50 48 46 67 66 64 61 59 70 69 67 64 62 90 88 86 82 80 20 45 42 39 37 35 59 56 54 50 47 61 59 56 53 50 79 76 72 70 65 30 35 31 27 24 18 48 44 40 37 32 50 48 44 41 37 66 62 57 55 50 40 17 10 31 26 20 10 36 33 25 23 19 50 45 42 37 32 50 16 9 30 23 20

Quick priming • Lightweight yet strong construction • Single Phase. Applications: Lawn & landscape sprinkling; self primer out of tanks or cisterns • Light chemical transfer for compatible fluids; call with liquid details. Part No. SC 3029K109 SC 3029K121

Description RETAIL 12 Volt Centrifugal Pump/Motor, 27 Amp ........ $ 936.66 12 Volt Centrifugal Pump/Motor, 13.5 Amp...... 936.66

Port Sizes Motor Wt. Part No. HP Suction Discharge Voltage Lbs. RETAIL SA PD2HE 1 2” 1-1/2” 115/230 38 $ 686.08 SA PD2HF 1-1/2 2” 1-1/2” 115/230 41 710.20 SA PD2HG 2 2” 2” 230 52 932.64 SA PDHHG 2-1/2 2” 2” 230 54 978.20 Motors are open-drip standard; 1 phase. NOTE: All motors are shipped from the factory at 230 volt. 1 and 1-1/2 HP pumps also feature dual voltage motors. Easy to change voltage settings require switching only 2 wires to reset voltage. Just remove the dust cover and change the 2 leads on the terminal board as shown on motor nameplate.

IND

DULTMEIER SALES • OMAHA, NE

(800) 228-9666

•

www.dultmeier.com

• DAVENPORT, IA

(800) 553-6975

E0238

Low Volume Utility Transfer Pumps

152

Utility Transfer Pump

Utility Pump

115 Volt

Light-duty, Economical Utility Pumps for a wide variety of transfer requirements. Features non-corrosive pump end with stainless steel wear plates. Inlet and outlet ports are 3/4" MGHT.

Little Giant Transfer Pump is ideal for mild chemical transfer and carpet cleaning applications. Non-submersible design is not self-priming and requires a flooded suction. Rated to a maximum of 2.85 GPM and up to 35 PSI.

M40

M40 is UL listed and features a 115 volt motor with thermal overload protection and grounded 6' power cord with plug. Rated to 4 GPM @ 10' discharge height.

Features Include: Nylon pumping head with Ryton impeller • Carbon/Ceramic seal • Buna O-Ring • Ports are 3/8" hose barb • 1/8" Bypass port • Rated to 115-volt • 1/10 H.P. • 24" lead wires (does not include switch) • Dimensions: 4" Width, 7" Length, 3" Height • Weight is 2.7 lbs. • Intermittent Liquid Maximum Temperature is 120˚ F.

Part No. Voltage * Flow Rate Wt RETAIL SR M40 Utility Pump 115 Volt 4 GPM 6 lbs. $ 146.06 SR A252 Impeller kit for M40 pump....................................... 26.67

* Flow rate is based on 10' discharge height.

MRB15002

12-Volt Aqua Tiger Pumps

Part No.

Features: • 12-Volt DC Centrifugal Pumps • 3/4" Ports/Viton® Seal • Low Flow/Pressure 5 GPM @ 9 PSI Maximum Flow 18 GPM • Bronze Body & Impeller or 316 Stainless Body/Impeller • Maximum temperature is 140˚ F.

Part No. Voltage Description HY 9700B 12 Volt DC Bronze Centrifugal Pump SR COMSV012D 12 Volt DC Stainless Centrifugal Pump

Wt. RETAIL 5 lbs. $ 329.64 5 lbs. 403.34

12 Volt High Head Utility Pumps 1 HP, 12 Volt motor provides high pressures for wash down and many other applications where 120 Volt power is not available. Available in either investment cast iron or stainless housing. Stainless enclosed impellers & shaft are standard. Discharge rotates in 90° increments; includes 4 drain plugs. Rated to 180° F. with buna seal; 200° F. with viton seal. 5 GPM at 33 PSI, 25 GPM at 26 PSI, 50 GPM at 10 PSI. 1 1/4” x 1” FPT ports. Straight centrifugal (not D self-priming). 1 Hour Duty Rating: 83 amps maximum. Part No. GR 489G-95 GR 489G-98

Housing Cast Iron Stainless

Mech. Seal Buna N Viton®

GJ 350M

RETAIL

115-Volt Transfer Pump, 115 Volt

$ 222.44

Pony Pumps 12 Volt & 115 Volt Pony Transfer Pumps are lightweight, non-submersible and portable. Can be used for transfer and dewatering at low pressure (10 PSI). Rated for intermittent duty (15 minutes on, 45 minutes off). Self-priming up to 6’. Plated brass bodies. Dual ports with 3/4” male garden hose x 3/8” FPT. 1/10 H.P. 12-Volt units come with 6” lead wires. 110-volt comes with 5’ power cord.

Part No.

Voltage

GPM

Wt.

GJ PP1 GJ PP12

115 Volt 12 Volt

6.0 5.0

5.5 lbs. 4.2 lbs.

RETAIL

$ 173.87 163.15

Stainless Straight Centrifugal Pumps

Wt RETAIL 57 lbs. $ 1259.60 57 lbs. 1575.84

Features: • FRX Series Investment

3/4” Self-Priming Stainless Pumps

• 316 Cast Stainless

• Viton® / Carbon / Ceramic Seals

316 Cast Stainless • 12 Volt & 115 Volt Designed for Low-Volume Transfer These MP Pumps are designed for lowvolume transfer where self-priming capability is needed.

Features: 316SS (Investment Cast) housing, cover, wear plate and impeller for chemical resistance • Viton®/Carbon/ Ceramic seal • 3/4” x 3/4” FPT Ports • Self-priming to 12’ suction lift • Maximum flow is 21 GPM (18 GPM on 12 volt model) • Maximum pressure is 10 PSI (8 PSI on 12 Volt model) • 115 Volt model includes totally enclosed, non-ventilated motor.

Part No.

Description

MX 35321 MX 35322

3/4” 316SS Pump with 115 Volt Motor 3/4” 316SS Pump with 12VDC Motor

Wt.

FX125 Part No. Description Flowrate

MX 34141 3/4” 316SS Pump with 12V Motor

20 GPM @ 6.5 PSI 26 GPM 12.5 PSI 3/4” FPT 10 $ 419.42

MX 35666 3/4” 316SS Pump with 115V Motor

20 GPM @ 6.5PSI 26 GPM 12.5 PSI 3/4” FPT 18

MX 34932 1” 316SS Pump with 115V Motor

RETAIL

18 lbs. $ $ 576.20 10 lbs. 531.98

Max. Shut-Off Wt. Flow Pressure Ports Lbs. RETAIL

35 GPM @ 18.5 PSI 42 GPM 23 PSI

1” FPT

MX 35950 1-1/4” 316SS Pump with 115V Motor 60 GPM @ 27 PSI 75 GPM 37 PS

1.25” X 1” FPT

442.20 1093.44 CALL

Viton® is a registered trademark of DuPont Performance Elastomers

IND

DULTMEIER SALES • OMAHA, NE

(800) 228-9666

•

www.dultmeier.com

• DAVENPORT, IA

(800) 553-6975

E0849

Roller Pumps 4000 Series

High Speed, 4-Roller Pumps

Two Models are Available. Model 4001 to 1800-RPM & Model 4101 to 2600 RPM . These pumps are popular for use on gas engine powered portable sprayers, as they can run at speeds up to 2600 RPM. They will pump oils, distillates and many other chemicals. Maximum temperature is 140° F. Weight is 5 lbs.

Capacity: to 8-GPM @ 50 PSI Shaft: 5/8" O.D. Stainless Steel Seals: Viton® Pump Shaft Rotation: CW when facing shaft

Performance

Super Rollers Ports: 3/4" FPT Max. Pressure: 150 PSI Bearings: Shielded Ball

0 PSI 25 50 75 100 125 150 Series RPM GPM HP GPM HP GPM HP GPM HP GPM HP GPM HP GPM HP 4001

1800

9.1 .14

8.5 .30

8.0 .46

7.6 .62

7.3 .78

7.0 .95

6.7 1.1

4101

2600

7.2 .16

6.9 .30

6.6 .46

6.4 .62

6.0 .76

5.7 .92

5.4 1.08

Part No. RETAIL HY 4001N Ni-Resist Pump, 1800-RPM........................ $ 320.26 HY 4001XL Silver Cast® Pump, 1800-RPM ................. 464.98 HY 4101C Cast Iron Pump, 2600-RPM........................ 173.87 HY 4101N Ni-Resist Pump, 2600-RPM........................ 309.54 HY 4101XL Silver Cast® 2600 RPM .............................. 452.92 HY 3420-24 Mounting Base for Electric Motors. 3-1/2" Base to Shaft..................................... 40.07 DU R40 Repair Kit. Super Rollers, Sealed Bearings & Viton® Seals.................. 52.53

The Roller Pumps on this page are used mainly in agriculture, park and turf management and pest control. They operate efficiently at tractor PTO speeds, will handle suspensions of non-abrasive wettable powders and will tolerate considerable wear before performance is adversely affected. Body: Cast iron, Ni-Resist or Silver Cast®. Seals: Viton® is standard on 1700, 4000, 6500 and 7560 Series. Buna-N is standard on the 1500 series. Shafts: are all of Stainless Steel. Rollers: These pumps are all supplied with a composite roller of nylon and polypropylene; Teflon and Buna-N rollers are available for specific applications.

XL Silver Cast® Pumps Silver Cast is a new alloy developed by Hypro which is harder, wears better and is more corrosion resistant than any other casting material used in Ag Roller Pumps. These pumps will outlast cast iron models by 10 times. Use on Roundup™ type products.

1700 Series 1" Ports

PRESSURE 50 PSI 100 PSI 150 PSI 200 PSI R.P.M. G.P.M. H.P G.P.M. H.P G.P.M. H.P G.P.M. H.P. 540 21.0 1.18 19.0 2.13 17.0 2.89 15.0 3.85 800 34.5 1.85 32.5 3.20 29.5 4.75 28.0 6.20 * 900 40.0 2.63 38.0 3.95 35.0 5.40 - * 1000 43.0 3.00 41.0 4.67 39.0 6.07 - * For 900 & 1000 rpm speeds. Recommended continuous duty maximum pressure 100 PSI (.69 MPa): Recommended intermittent duty maximum pressure-150 PSI.

6500 Series

An extremely versatile pump despite low cost. Available in Ni-Resist, Cast Iron and Silver Cast® construction. Equipped with Viton® seals, sealed bearings. Maximum Temperature is 140° F. Metallic rotor. Weight is 9 lbs.

Part No. HY 1700C HY 1700N HY 1700XL DU R17

1500 Series - High Capacity 1-1/2" Ports 6-Rollers

Part No. 6-ROLLER HYPRO PUMPS RETAIL HY 6500CA Cast-Iron Pump. Less PTO Coupler, CCW....... $ 187.27 HY 6500CAR Cast-Iron Pump - Reverse Rotation, CW *....... 195.31 HY 6500NA Ni-Resist Pump. Less PTO Coupler, CCW....... 423.44 HY 6500XLA Silver Cast® Pump Less Coupler, CCW .......... 585.58 DU R65 Repair Kit. with Super Rollers, Seals & Bearings.................................. 58.29 HY 3420-23 Base Kit. For 6500 Series Pumps...................... 34.04 * CW Rotation for engine unit drive.

Capacity: to 60 GPM Max. Pressure: 150 PSI Shaft: 15/16" O.D. Super Rollers

Max. Temp: 140° F. Max. RPM: 1000 Seals: Buna-N Weight: 26 lbs.

Pump Shaft Rotation: CCW when facing shaft PUMP 0 PSI 25 PSI 50 PSI 100 PSI 150 PSI SPEED (RPM) GPM HP GPM HP GPM HP GPM HP GPM HP 540 33.1 .51 29.7 1.02 27.8 1.45 24.3 2.46 21.0 3.5 800 49.5 1.29 46.1 1.90 44.6 2.49 41.5 3.90 38.3 5.44 1000

8-Rollers

62.1 2.02 58.5 3.04 56.9 3.69 53.9 5.31 50.9 7.12

Note: Pump Requires a 2" Suction Line at speeds above 800 RPM.

Part No. 6-ROLLER HYPRO PUMPS RETAIL HY 1502C Cast Iron Pump, Less PTO Coupler......... $ 593.62 HY 1502XL Silver Cast® Pump, Less PTO Coupler... 1330.62 HY 3420-4 Base Kit For N1502 Pumps....................... 85.09 DU R15 Repair Kit. with Super Rollers, Seals & Bearings....................................... 105.86

Available in Ni-Resist, Cast Iron and Silver Cast® construction. Performs well over a wide range of pressures and capacities. Maximum temperature is 140° F. Metallic rotor. Weight is 14 lbs. Max. RPM: 1000 Capacity: to 22 GPM Shaft: 15/16" O.D. Max. Pressure: 150 PSI Seals: Viton® Super Rollers Pump Shaft Rotation: CW or CCW when facing shaft

RETAIL Cast-Iron Pump, Less PTO Coupler........... $ 385.92 Ni-Resist Pump, Less PTO Coupler........... 562.80 Silver Cast® Pump, Less PTO Coupler..... 1066.64 Repair Kit. with Super Rollers, Seals & Bearings............................ 95.14

Note: Use 1" Suction Line at speeds above 800 RPM.

SPEED 0 PSI 50 PSI 100 PSI 150 PSI 200 PSI 250 PSI 300 PSI RPM GPM HP GPM HP GPM HP GPM HP GPM HP GPM HP GPM HP 540 10.2 .09 8.1 .58 7.5 .83 6.7 1.16 6.0 1.45 5.1 1.81 4.1 2.14 600 11.4 .10 9.1 .65 8.6 .90 7.7 1.27 7.2 1.62 6.1 2.01 5.4 2.36 800 15.1 .17 12.9 .86 12.3 1.21 11.3 1.68 10.9 2.14 10.1 2.65 9.4 3.13 1000 18.7 .25 16.4 1.11 15.8 1.54 14.7 2.13 14.2 2.69 13.5 3.33 12.6 3.99 1200 21.9 .39 19.7 1.40 18.9 1.93 18.1 2.69 17.5 3.35 16.8 4.14 16.0 4.93

7560 Series 3/4" Ports

5-Rollers

A rugged five-roller pump designed for long life in hard service. Rated output exceeded only by the larger series 1500 pump Max. RPM: 1000 Capacity: to 43 GPM Shaft: 15/16" O.D. Max. Pressure: 200 PSI D Seals: Viton® Weight: 20 lbs. Super Rollers Pump Shaft Rotation: CCW when facing shaft NOTE: Use 1-1/4" Suction Line at speeds above 800 RPM.

3/4" Ports 6-Rollers

Max. RPM: 1200 Capacity: to 21 GPM Shaft: 5/8" O.D. Max. Pressure: 150 PSI Seals: Viton® Super Rollers Pump Shaft Rotation: CW or CCW when facing shaft

153

We now have our Catalogs as well as Parts Schematics online!

NOTE: Use 1" Suction Line at speeds above 800 RPM. PRESSURE 50 PSI 100 PSI 150 PSI 200 PSI 250 PSI 300 PSI R.P.M. G.P.M. H.P. G.P.M. H.P. G.P.M H.P. G.P.M. H.P. G.P.M. H.P. G.P.M. H.P. 400 8.3 .53 7.6 .86 6.7 1.26 6.0 1.62 5.1 2.0 4.3 2.5 540 11.1 .74 10.3 1.25 9.5 1.77 8.6 2.26 7.8 2.78 7.1 3.3 600 13.1 .87 12.1 1.41 11.2 1.98 10.6 2.5 10.0 3.1 9.1 3.7 800 17.5 1.26 16.9 1.95 16.1 2.65 15.5 3.4 14.5 4.2 13.7 4.9 1000 22.0 1.78 21.3 2.53 20.6 3.5 20.0 4.2 18.9 5.3 18.0 6.1

Part No. 8-ROLLER HYPRO PUMP RETAIL HY 7560CA Cast-Iron. Less PTO Coupler, CCW................ $ 243.88 HY 7560CAR Cast-Iron Pump - Reverse Rotation, CW *...... 250.58 HY 7560NA Ni-Resist. Less PTO Coupler, CCW................ 479.72 HY 7560NAR Ni-Resist REVERSE ROTATION, CW * .......... 486.42 HY 7560XLA Silver Cast ® Less PTO Coupler, CCW .......... 696.80 HY 7560XLAR Silver Cast ® REVERSE ROTATION, CW *..... 703.50 DU R75 Repair Kit with Super Rollers, Seals & Bearings................................. 83.75 HY 3420-3 Base Kit For 7560 Pumps................................ 53.20 * CW Rotation for engine unit drive.

www.dultmeier.com

Viton® is a registered trademark of DuPont Performance Elastomers

IND

DULTMEIER SALES • OMAHA, NE

(800) 228-9666

•

www.dultmeier.com

• DAVENPORT, IA

(800) 553-6975

E0246

Repair Kits • Roller Pumps • PTO Adapters

154

PM4000 Pump & Motor Unit

PUMP REPAIR KITS CONTAIN MOST FREQUENTLY REQUIRED REPAIR PARTS

Pump Repair Kits

ROLLER PUMPS R64 Kit For: 6400 Roller Pumps

PM4000 Chemical Pump Unit with 1-H.P. TEFC single phase D motor. Works well D for transferring most chemicals with viscosity. The Hypro 4001N Ni-Resist Pump PM4000-XL with capacities to 150-PSI and 9-GPM is self priming to 3'. Assembly includes carrying handle and base plate with 1 HP, 115V motor. Supplied with 25’ cord with 14 amp GFI. PM4000-XL includes 4001XL Silvercast pump for improved corrosion resistance.

Qty. Includes: 6 1005-4 Super Rollers 1 1720-8 O-Ring 2 2000-4 Bearing 2 2107-2 Seal

R15 Kit For: 1500 Roller Pumps

R65 Kit For: 6500 & 6600 Roller Pumps

Qty. Includes:

6 1005-5 Super Rollers 1 1720-3 O-Ring 2 2008-1 Bearing 2 2112-3 Seal

6 1005-4 Super Rollers 1 1720-8 O-Ring 2 2000-4 Bearing 2 2107-2 Seal

R75 Kit For: Series - 7500 Roller Pump

R17 Kit For: 1700 Roller Pump Qty. Includes:

Qty. Includes:

5 1005-5 1 1720-99 2 2008-1 2 2112-3

Super Rollers O-Ring Bearing Seal

4 1005-2 1 1720-104 2 2000-4 2 2107-2

8 1005-4 Super Rollers 1 1720-14 O-Ring 2 2008-1 Bearing 2 2112-3 Seal

Super Rollers O-Ring Bearing Seal

Qty. Includes:

7 1005-4 Super Rollers 1 1720-14 O-Ring 2 2008-1 Bearing 2 2112-3 Seal D

Part No. Engine HP HYPRO PUMP GPM @PSI Wt./Lbs. RETAIL DU PM4101CH Honda 3.5 4101C 5.4 150 75 $ 1184.56 DU PM5075 B&S 6.5 7560N 10 200 78 1733.96 DU PM5075H Honda 5 7560N 10 200 78 1842.50 DU PM8015H Honda 8 1502XL 21 150 110 3104.78

PTO Adapters

3430-0445 Repair Kit For: Hydraulic & Pedestal Poly Pumps

R92 for 9200/9400 Qty. Includes: 1 1410-56 Slinger 1 1610-4 Key 1 1610-15 Key 1 1720-83 O-Ring 2 1810-14 Retainer 1 1820-13 Retainer 1 1830-40 Retainer 2 2000-4 Bearing 1 2253-2 Nut 1 2120-9 Seal

Qty. Includes:

DL 35745 KIT For Centrifugal Pumps No's. 34945-1 or 35566-1 Part No. DL 35745

(800) 228-9666

1323-76

1320-80

Material Forged Steel Forged Steel Forged Steel Forged Steel Forged Steel

RETAIL $ 47.84 49.85 47.57 136.35 114.57

Repair Kits for Delavan Centrifugal Pumps

Part No. RETAIL DU R90 $ 246.56 DU R90P 345.72 DU R92 75.04 HY 3430-0445 75.71 DU R75 83.75

DULTMEIER SALES • OMAHA, NE

1320-77

Coupler For Pump FOR PTO SHAFT: Part No. Type Shaft RPM Size Splines HY 1320-77 Standard 5/8" 540 1-3/8" 6 HY 1320-76 Standard 15/16" 540 1-3/8" 6 HY 1320-78 Standard 15/16" 1000 1-3/8" 21 HY 1323-77 Quick Cplr. 5/8" 540/1000 1-3/8" 6/21 HY 1323-76 Quick Cplr. 15/16" 540/1000 1-3/8" 6/21

HYPRO REPAIR KIT PRICES Part No. RETAIL DU R15 $ 105.86 DU R17 95.14 DU R40 52.53 DU R65 58.29 DU R75 * 83.75 * Note: R75 Not for 9300P

35992

1 2120-11 Viton® Seal 1 1720-83 O-Ring 1 2270-57 Washer 1 2250-51 Washer 1 2250-52 Washer 1 1610-12 Key 2 2008-1 Bearing 1 1820-25 Retainer 1 1410-83 Slinger 1 1610-4 Key

NOTE: Order belts or Hydraulic Motor Parts Separately

HYPRO ENGINE UNITS are pre-assembled. Engines are gear reduction for 600 RPM (except for PM4101CH). All units include “Orange Peel” OSHA approved coupling guards.

PM4101CH: Includes 4101C roller pump, long coupled to Honda 3.5 HP engine (GX120), 5.4 GPM @ 150 PSI. PM5075: Includes a 7560N roller pump mounted as shown with a Briggs & Stratton or Honda 6.5 HP Gear reduction engine. Maximum pressure is 200 PSI. PM8015H: Includes a 1502XL roller pump long coupled to a Honda 8 HP gear reduction engine. 21 GPM and maximum pressure to 150 PSI.

1 2120-11 Viton® Seal 1 1721-83 O-Ring 1 1720-139 O-Ring 1 2130-17 Bearing 1 1700-98 Gasket 1 2008-1 Bearing 1 2005-2 Bearing 4 1450-4 Cushion 1 2270-57 Washer 1 2250-51 Jam Nut 1 1150-52 Nut Seal 2 1610-12 Key 2 1810-13 Retainer 1 1820-25 Retainer 3 2007-22 Inner Race 1 1810-11 Retainer 1 1800-14 Retainer 1 2102-25 Oil Seal 1 1810-1 Retainer

Repair Kits For: 9200/9400 Series Cast Iron Pumps

PM4101CH

Qty. Includes:

8 1450-4 Cushion 2 1610-12 Key 1 1720-83 O-Ring 1 1810-1 Retainer 1 1810-11 Retainer 2 1810-13 Retainer 1 1820-6 Retainer 1 1800-14 Retainer 1 2008-1 Bearing 1 2005-2 Bearing 3 2007-22 Race 1 2253-1 Nut 6 2265-3 Washer 1 2120-11 Mechanical Seal 1 2130-17 Lip Seal NOTE: Order Gears Separately

RETAIL

with Gas Engine Drive

R90P Kit For: Gear Driven Poly Pumps

R90 Repair Kit For: 9000 Series Gear Drive Centrifugal Pumps

Wt.

Roller Pump Units

CENTRIFUGAL PUMPS

With 1 H.P. TEFC Motor 49 lbs. $ $ 1425.76 Same with 4001XL Pump 49 lbs. 1527.60

Qty. Includes:

Chemical Transfer Pump

DU PM4000 DU PM4000-XL

R77 Kit For: 7700 Roller Pumps

R40 Kit For: Series - 4000 Pump-1979 on

Part No.

•

RETAIL

$ 49.45

www.dultmeier.com

• DAVENPORT, IA

Includes:

(1) (1) (1) (1) (1)

34912 Pump Gasket 34944 Locknut Cap 34942 Washer 34943 Face Seal Assembly 35278 Slinger Gasket

(800) 553-6975

E0753

Diaphragm Pumps

155

Hypro Diaphragm Pumps are the most complete line of pumps available for spraying and pumping of herbicides, pesticides, liquid fertilizer and hard-to-handle fluids. Hypro offers a wide range of flows and pressures for slurries and suspensions. Pressures for row crop to treetop spraying applications range from 20 to 725 PSI with flow rates from 3.5 to 66 GPM. Low cost maintenance and almost wear-free operation. These models can handle fluids up to 140° F. and can be run dry. Hypro diaphragm pumps can be driven by 540 rpm PTOs, 3 to 25 HP gasoline engines, electric or hydraulic motors. Features: Anodized aluminum or epoxy-coated housings • Check valves include nylon cages & stainless springs • Oil-bath design and premium quality Desmopan (polyurethane) diaphragms provide longer life and greater reliability • Self-priming operation • Wide spectrum of flows and pressures • Corrosive, abrasive and general use chemical compatibility. (Call for chemical compatibility) • Visual oil-level sight glass. Note: 40 - 50 Mesh screen recommended upstream of pumps.

Low Pressure Diaphragm Pumps Part No.

Max. Max. Max. GPM PSI RPM † Req’d HP LOW PRESSURE DIAPHRAGM PUMPS: RETAIL

HY 9910-D252 6.0 HY 9910-D252GRGI 6.0

290 650 290 3600

2 2

Pump Only with 3/4” solid keyed shaft ............... $ 594.96 Same as above with Control Unit & Gearbox .... 821.42

HY 9910DP423GRGI * 11.0 290 550 2.5 Poly Pump with Control Unit & Gear Reducer............ HY 9910-D70 * 19.0 290 550 5 Pump Only (Requires Shaft Kit).................................. HY 9910-D70GR * 19.0 290 3600 5 Pump w/ 3/4" Hollow Shaft & Gear Reduction for 5HP Gas Engine.................................................... HY 9910-D115 * 30.1 290 550 8 Pump Only (Requires Shaft Kit).................................. 30.1 290 3600 8 Pump w/ 3/4" Hollow Shaft & Gear Reduction HY 9910-D115GR34 for 5HP Gas Engine (For 200 PSI Max.)..................... HY 9910-D135 34.8 290 550 10 Pump Only - 1-3/8"-6B Splined Shaft.......................... HY 9910-D160 42.5 290 550 11 Pump Only - 1-3/8"-6B Male Spline thru Shaft........... HY 9910-D250 66.0 290 550 17 Pump Only - 1-3/8"-6B Male Spline thru Shaft........... * For shaft kits see Hypro Accessories Page. † Gas Engine. Above pumps have epoxy coated housings.

9910-D30

9910-D403

824.10 1234.14

1650.88 1329.28 2182.86 2749.68

9910-D115

D D

1155.08 824.10

9910-D2522

9910-D503

9910-D50

Medium Pressure Diaphragm Pumps Max. Max. Max. Part No. GPM PSI RPM † Req’d HP MEDIUM PRESSURE DIAPHRAGM PUMPS: Wt. HY 9910-D30 * 9.5 580 550 5 Pump Only, Requires Shaft Kit ................................ 23 lbs. HY 9910-D30AP-A 9.5 580 550 5 Same as above with 3/4" solid extended shaft ........ 23 lbs. HY 9910-D30GRGI 9.5 580 3600 5 Pump Only with Control Unit & HD Gearbox............ 33 lbs. HY 9910-D403 * 10.6 580 550 6 Pump Only, Requires Shaft Kit ................................ 23 lbs. HY 9910-D403GRGI 10.6 580 3600 6 Same as above with HD Gearbox & Control Unit..... 27 lbs. HY 9910-D50 * 14.0 580 550 8 Pump Only, Requires Shaft Kit................................. 34 lbs. HY 9910-D50AP-A 14.0 580 550 8 Same as above with 1" solid extended shaft ........... 35 lbs. HY 9910-D503 * 15.0 580 550 9 Pump Only, Requires Shaft Kit................................. 28 lbs. HY 9910-D503GRGI 15.0 580 3600 9 Same as above with HD Gearbox & Control Unit..... 40 lbs. * For shaft kits, pressure controls & gear reduction kits see Hypro accessories page. † Gas Engine. Above have epoxy coated housing except for D30 & D50 groups which are anodized aluminum.

High Pressure Diaphragm Pumps

TREE SPRAYING SELECTION GUIDE: Height Pump Capacity Spray Gun 30-35 ft. D252 6 GPM 3381-10 275 PSI 3381-13 35-40 ft. D403 9.5-10.5 GPM 3381-10 D30 550 PSI 3381-13 45-50 ft. D50 14 - 15 GPM 3381-11 D503 550 PSI 50-57 ft. D813 21 GPM 3381-11 700 PSI 60-68 ft. D1064 28 GPM 3381-11 700PSI

9910-D1064

RETAIL $ 742.36 790.60 1326.60 766.48 1393.60 1047.88 1100.14 1047.88 1776.84

Nozzle 3385-3000

Gas HP 3 HP

3385-3000

5.5 HP

3385-4000

9 HP

3385-4500

14 HP

3385-6000

18 HP

REPA IR S ERV A Oma vailable ICE ha & in Dave npor t

9910-D813

Max. Max. Max. Part No. GPM PSI RPM † Req’d HP HIGH PRESSURE DIAPHRAGM PUMPS: Wt. HY 9910-D813 21.4 725 550 14 Pump Only with 1-3/8"-6B male spline extended shaft .............. 58 lbs. HY 9910-D813GRGI 18.0 725 3600 14 Same as above with Gearbox & Control Unit............................ 57 lbs. HY 9910-D1064 28.0 725 550 18 Pump only with 1-3/8"-6B male spline extended shaft ............... 57 lbs. HY 9910-D1064GRG 28.0 725 3600 18 Same as above with Gearbox & Control Unit............................. 75 lbs. * For shaft kits, pressure controls & gear reduction kits see Hypro accessories page. Above pumps have anodized aluminum housings. † Gas Engine.

IND

DULTMEIER SALES • OMAHA, NE

(800) 228-9666

•

www.dultmeier.com

• DAVENPORT, IA

(800) 553-6975

RETAIL $ 1344.02 2298.10 1476.68 2476.32

E0266

Diaphragm Pump Accessories

156

1" Solid Shaft Kits

Pressure Control Units Hypro or A/R Diaphragm Pumps

9910-GR40

Part No. 1" Solid Shaft Kits for: Wt. RETAIL HY 9910-KIT1703 D30 AR30 Pumps .......................................... 3 lbs. $ 85.76 HY 9910-KIT1707 D50 AR50 Pumps........................................... 4 lbs. 97.15 HY 9910-KIT1711 D70 and D115 AR70/115 Pumps..................... 5 lbs. 176.55 HY 9910-KIT2202 D303, -D403 & -D503 AR303/403/503 Pumps... 4 lbs. 73.70 HY 9910-KIT2203 D813, D1064, D1265 AR813/1064/1265 Pumps. 4 lbs. 76.38 * Kits include solid shaft adapter, mounting bracket and necessary hardware.

— Rated to 140° F. —

6:1 Gear Reduction Kits

Pressure Control Units Part No.

LOW PRESSURE

HY 9910-KIT1640 Part No. GPM PSI Description RETAIL HY 9910-KIT1990 6.6 290 Poly Control, Direct Mount for HY 9910-KIT1642 D252 & AR252 Pumps ......................... $ 100.50 AR GS25S 13 290 Poly Control, Remote Mount ................ 163.15 HY 3300-0087 42 290 Poly Control, Remote Mount................. 309.54

GEAR REDUCTION KITS FOR: Wt. RETAIL D30/50/303/403, AR30/50/303/403 Pumps. 6:1 gear box for std. with 3/4" shaft 3-5 lbs. $ 501.16 D30/50/303/403, AR30/50/303/403 Pumps. 6:1 gear box for std. 8-18 HP gas engine with 1" shaft.............................. 9 lbs. 517.24

Hydraulic Motor Mounting Flange Kits

MEDIUM PRESSURE

Part No. GPM PSI Description RETAIL HY 9910-GR40 10.6 580 Poly Control, Remote Mount ................ $ 139.03 HY 9910-GS40GI 21 580 Poly Control, Direct Mount for D30/50/303/403 & AR30/50/403 Pumps.. 184.59 HY 9910-RM40 21 580 Poly Control, Remote Mount................. 227.80 9910-HYD5312

9910-HYD1570

HIGH PRESSURE

Part No. Part No. GPM PSI Description RETAIL HY 9910-HYD5312 HY 9910-VDR50 34 725 Poly Control, Remote Mount ................ $ 389.94 HY 9910-GS50GI 48 725 Poly Control, Remote Mount................. 294.80 HY 9910-GH50 53 725 Brass Control, Direct Mount ................. 335.00 HY 9910-HYD1570 HY 9910-BMH50 53 725 Brass Control, Remote Mount............... 424.78

9910-HYD5341

Fits Diaphragm Pump Models D30, AR30, D50, AR50, D303, AR303,D403,AR403, D503, AR503, D813, AR813, D1064, AR1064, D1265 & AR1265 D160, D250, AR160 & AR250

HY 9910-HYD2495 D70, D115, AR70 & AR115.

Part No. HY 9910-HYD5312 HY 9910-HYD1570 HY 9910-HYD2495

HYD. MOTOR MTG. FLANGE KITS WT./Lbs. RETAIL Includes (1) Flange, (1) 1" Hollow Shaft and (2) Bolts.................................. 5.5 $ 211.72 Includes (1) Flange, (1) Coupling & (6) Bolts 2.5 269.34 Includes (1) Flange, (1) Coupling & (2) Pins 5.5 211.72

Diaphragm Pump Repair Kits

Hypro Pump Oil Pump Lubricant Oil from Hypro. Specially formulated, multi-weight oil with special added agents. Reduces wear in piston, plunger and diaphragm pumps. Provides smooth pump operation in a variety of temperatures. SAE 10W30 Non-detergent oil is sold in 1 quart bottles. Part No.

Size

* Std. Pack

HY 2160-38 1-Quart 12 HY 2160-47 1 Gallon -

SERVICE & REPAIRS Did you know? We can service almost every brand of pump we sell in our catalog.

Call us at 1-800-228-9666 (Omaha, NE) for a quote!

RETAIL

$ 17.02 47.17

*10% Discount On Case of 12

IND

DULTMEIER SALES • OMAHA, NE

(800) 228-9666

•

www.dultmeier.com

• DAVENPORT, IA

(800) 553-6975

E0269

Diaphragm Pumps

157

AR Diaphragm Pumps are a great choice for fluid transfer and spraying of a wide range of chemicals and solutions. Most pumps are interchangeable with common diaphragm pumps in the market. Ideal for lawn and turf care, agriculture, tree spraying, house washing, roof cleaning and a wide variety of industrial applications*.

Polypropylene or Coated Aluminum Bodies. BlueFlex proprietary diaphragms are standard and can handle a wide variety of chemicals and solutions. Viton® diaphragms are standard on a few pumps as shown. Viton®, Buna and Desmopan diaphragms are available in most models if required. All pumps are self-priming and can be run dry. Maximum fluid temperature is 140° F. All models are rated to 540 RPM and are designed to be direct driven by gas engines with gear reducers, PTO shafts, pulleys or hydraulic motors. Some models include a drive package with gear box reducers and pressure controls. (Pressure controls are shown on adjacent pages and can be direct mount or remote mount. All pumps require some type of pressure control if not included). Pumps are shown with 3/4” or 1” solid keyed shafts or with gear boxes with 3/4” or 1” hollow shafts for direct mount to gas engines. Male or female 1-3/8” splined shafts are also standard on some models. Pulley drive kits and hydraulic drive kits are also available. * Consult Tech Sales for chemical limitations.

Low Pressure Models Max. Max. Part No. GPM PSI Shaft Body Inlet Outlet AR 252SPSGC 6.5 360 3/4” Solid Alum. 3/4” 1/2” AR 252GRGCI34 * 6.5 360 3/4” Hollow Alum. 3/4” 1/2” AR 45LFPSP 11.4 290 3/4” Solid Poly 1-1/2” 1” AR 45LFPGRGCI ** 11.4 290 3/4” Hollow Poly 1-1/2” 1” AR 70BPSPA1 19.6 290 1” Solid Alum. 1-1/4” 1” AR 70BPGR34 # 19.6 290 3/4” Hollow Alum. 1-1/4” 1” AR 80LFPSP 20.1 290 3/4” Solid Poly 1-1/2” 1” AR 80LFPGRGCI ** 20.1 290 3/4” Hollow Poly 1-1/2” 1” AR 115BPSPA1 28.5 290 1” Solid Alum. 1-1/2” 1” AR 115BPGR34 # 28.5 290 3/4” Hollow Alum. 1-1/2” 1” AR 135BPSPA1 33.8 290 1” Solid Alum. 1-1/2” 1” AR 135BPGR34 # 33.8 290 3/4” Hollow Alum. 1-1/2” 1” AR 140LFPSP 35.0 220 3/4” Solid Poly 1-1/2” 1” AR 160BPCC 44.0 290 1-3/8” Spline Alum. 2” 1-1/2” AR 160LFPCC 44.0 220 1-3/8” Spline Poly 2” 1-1/4” AR 250BPCC 67.0 290 1-3/8” Spline Alum. 2” 1-1/4” AR 330BPCC 84.0 290 1-3/8” Spline Alum. 2-1/2” 1-1/4”

AR70BP Series

AR115BP Series

Req’d Gas HP 2.6 2.6 3.6 3.6 6.2 6.2 6.4 6.4 9.0 9.0 10.7 10.7 8.5 14 10.6 21 27

RETAIL $ 545.38 808.02 801.32 1388.24 980.88 1346.70 929.96 1786.22 1384.22 1629.44 1404.32 1664.28 1254.24 1857.24 1857.24 2438.80 2981.50

Req’d Gas HP 6.1 6.1 6.8 6.8 7.75 7.75 9.1 9.1 9.4 9.4 13.4 13.4 19 23 27 34

RETAIL $ 783.90 1136.32 865.64 1129.62 775.86 1236.82 1093.44 1696.44 1152.40 1433.80 1307.84 1921.56 2417.36 1456.58 1983.20 2552.70

* Includes Pressure Control Valve, BlueFlex Diaphragms and Gear Box for 3/4” Engines. ** Includes Pressure Control Valve, Viton® Diaphragms and Gear Box for 3/4” Engines. # Includes BlueFlex Diaphragms and Gear Box for 3/4” Engines, No Pressure Control.

1-3/8” 6 Splined Thru Shaft

Gear Reduction Units

Medium & High Pressure Models AR403 Series

AR813 Series

IND

Max. Max. Part No. GPM PSI Shaft Body Inlet Outlet AR 30SPA34 9.6 580 3/4” Solid Alum. 1” 1/2” AR 30GR34GCI * 9.6 580 3/4” Hollow Alum. 1” 1/2” AR 403SPA1 10.7 580 1” Solid Alum. 1” 1/2” AR 403GR34GCI * 10.7 580 3/4” Hollow Alum. 1” 1/2” AR 40SPA34 12.2 580 3/4” Solid Alum. 1” 1/2” AR 40GR34GCI * 12.2 580 3/4” Hollow Alum. 1” 1/2” AR 503SPA1 14.3 580 1” Solid Alum. 1-1/4” 1-1/4” AR 503GR34GCI * 14.3 580 3/4” Hollow Alum. 1-1/4” 1-1/4” AR 50SPA1 14.8 580 1” Solid Alum. 1-1/4” 1-1/4” AR 50GR1GCI * 14.8 580 1” Hollow Alum. 1-1/4” 1-1/4” AR 813CC 21.1 580 1-3/8” Spline Alum. 1-1/2” 1-1/2” AR 813GRCPCGCI * 21.1 580 1” Hollow Alum. 1-1/2” 1-1/2” AR BHS90CC 23.9 725 1-3/8” Spline Alum. 1-1/2” 1-1/2” AR 1064CC 28.7 725 1-3/8” Spline Alum. 1-1/2” 1-1/2” AR BHA130CC 33.7 725 1-3/8” Spline Alum. 1-1/2” 1-1/2” AR BHA170CC 42.4 725 1-3/8” Spline Alum. 1-1/2” 1-1/2”

* Includes Pressure Control Valve, BlueFlex Diaphragms and Gear Box for 3/4” or 1” Engines As Noted.

DULTMEIER SALES • OMAHA, NE

(800) 228-9666

•

www.dultmeier.com

• DAVENPORT, IA

(800) 553-6975

E1190

Diaphragm Pumps

158

UDOR Diaphragm Pumps for a wide variety of spraying applications. Ideal for use in lawn, turf, tree and agricultural field spraying. Pumps are self-priming and can be run dry. Designed to handle liquid fertilizers, abrasive materials, suspension products, pesticides, de-icing liquids and other hard to handle products. Can be driven by PTO, gas engines, hydraulic motors or belt drive. Rated for temperatures to 140˚ F. Maximum speed on all models is 540 RPM. Standard Features Include: Urethane diaphragms • Anodized, die cast aluminum crankcase, except ZETA-40P which is poly • Heat-treated crankshaft • Stainless steel check valves • Heavy-duty connecting rods • Self-lubricating piston sleeves.

All pumps include adjustable pressure control, pulsation dampener and gauge. Available with solid shafts for pulley drive or in gear reduction units with gear boxes for gas engine drive. (Mounting rails are standard on pulley drive units). Note: Pumps with spline shafts can be PTO driven or adapted to pulley drive with hubs shown below. Part No. UD KAPPA-15GR

KAPPA-25

Max. Max. Number of Shaft Inlet Outlet GPM PSI Diaphragms 3.5 275 2 3/4” Gear Box 3/4” 3/8”

Wt. Lbs. RETAIL 10 $ 647.22

UD IOTA-20 UD IOTA-20GR

4.5 4.5

275 275

2 2

3/4” Solid 3/4” Gear Box

3/4” 3/4”

3/8” 3/8”

14 17

793.28 779.88

UD KAPPA-25 UD KAPPA-25GR

7.0 7.0

350 350

2 2

25 mm Solid 3/4” Gear Box

1” 1”

1/2” 1/2’

18 28

723.60 875.02

3 3

— 3/4” Gear Box

UD ZETA-40P ** 10.5 300 UD ZETA-40P/GR 10.5 300

IOTA-20GR

1-1/4” 1/2” 1-1/4” 1/2”

36 1461.94 46 1838.48

** No Shaft Kit.

KAPPA-43

UD KAPPA-43 UD KAPPA-43GR

10.5 10.5

560 560

3 3

25 mm Solid 3/4” Gear Box

1” 1”

1/2” 1/2”

29 39

888.42 1238.16

UD KAPPA-55S UD KAPPA-55GR

15.0 15.0

560 560

3 3

1” Solid 1” Gear Box

1-1/4” 1-1/4”

1/2” 1/2”

39 49

1206.00 1583.88

UD DELTA-75S UD DELTA-75GR

20 20

560 560

3 3

1” Solid 1” Gear Box

1-1/4” 1-1/4”

1/2” 1/2”

48 58

1612.02 1906.82

UD DELTA-100C UD DELTA-100GR

26 26

560 560

4 4

1-3/8” Spline 1” Gear Box

1-1/2” 1-1/2”

1/2” 1/2”

52 72

1583.88 2286.04

UD ZETA-120 31 300 UD ZETA-120GR 31 300

3 3

* None 1-1/2” 1” 45 1204.66 1” Gear Box 1-1/2 1” 45 1675.00

UD KAPPA-121CC UD KAPPA-121GR

4 4

1-3/8” Spline 1” Gear Box

* Add

35 35

700 700

1-1/2” 1-1/2”

3/4” 3/4”

105 130

2556.72 3300.42

Shaft Kit As Needed.

KAPPA-55S

D D

DELTA-75GR

KAPPA-121GR

Drive Accessories #10 Hubs convert 1-3/8” splined shafts to pulleys that take H or Q hubs as noted. Number of grooves for pulley drive will be determined by flow and pressure requirements of pump. Part No. UD 10H6 UD 10Q1 UD 10Q2

10Q2

Hubs for Use on Pump Model RETAIL H Bushing for Pulley Driving Pumps with 1-3/8” Spline, Up to 2 Groove Pulleys... $ 32.96 Q Bushing for Pulley Driving Pumps with 1-3/8” Spline, Up to 3 Groove Pulleys... 87.10 Q Bushing for Pulley Driving Pumps with 1-3/8” Spline, Up to 5 Groove Pulleys... 93.80

TREE SPRAYING SELECTION GUIDE: HYPRO Height Pump Capacity Spray Gun 30-35 ft. KAPPA25 6 GPM 3381-10 275 PSI 3381-13 35-40 ft. KAPPA43 9.5-10.5 GPM 3381-10 550 PSI 3381-13 45-50 ft. KAPPA55 14 - 15 GPM 3381-11 550 PSI 50-57 ft. KAPPA120 21 GPM 3381-11 700 PSI 60-68 ft. KAPPA121 28 GPM 3381-11 700PSI

IND

DULTMEIER SALES • OMAHA, NE

(800) 228-9666

•

Nozzle

Gas HP

3385-3000

3 HP

3385-3000

5 HP

3385-4000

8 HP

3385-4500

14 HP

3385-6000

18 HP

www.dultmeier.com

• DAVENPORT, IA

(800) 553-6975

E0718

John Blue & John Bean Pumps

159

Low & High Pressure Diaphragm Pumps Excellent for acidic and highly corrosive products including 50% Sulfuric Acid, agchemicals, lawn care chemicals, fertilizers and many other products including heads that are constructed of polypropylene structure over aluminum diecast “core” for superior strength and chemical resistance. Desmopan or HPS diaphragms with 316SS diaphragm bolts and washers. 316SS inlet and outlet check valves. Oil sight gauge.

Low Pressure Diaphragm Pumps

Features: Excellent for Acidic & Highly Corrosive Products • Heads Constructed

Max. Max. Max. Max. of Polypropylene Bonded Over Aluminum Part No. GPM PSI RPM HP Polypropylene “Millenium” Series RETAIL Die-Cast for Superior Strength • All BU DP43P 4.3 290 650 1.2 Pump, 3/4” Solid Shaft................................................... $ 731.64 BU DP43-GRP 4.3 290 3600 1.2 BU DP70P 6.0 290 650 2.0 BU DP70.1GRIP 6.0 290 3600 2.0

Pump with Gear Reduction Unit for 3.5 & 5 HP Engines, Less Pressure Control Unit, 3/4” Solid Shaft.. Pump, 3/4” Solid Shaft................................................... Pump with Gear Reduction Unit for 5 HP Engine and Pressure Control Unit....................................................

BU DP193PP 19.8 218 550 2.8 BU DP193GRIP 19.8 218 3600 2.8

3 Diaphragm Pump, 1” Shaft (one side) 1-1/2” HB Suction x 1” Discharge................................................... Pump with Gear Reduction Unit for 5 HP Engine. Includes Pressure Control Unit. 1” Solid Shaft...............

1435.14

BU DP282P 28.2 218 550 4.1

3 Diaphragm Pump, 1” Shaft & 1-3/8” 6-Spline Shaft Opposite End, 1-1/2” HB Suction x 1” Discharge...........

1287.74

BU DP332P 33.3 218 550 4.8

3 Diaphragm Pump, 1” shaft & 1-3/8” 6-Spline Shaft Opposite End, 1-1/2” HB Suction x 1” Discharge...........

1368.14

Wetted Components are Polypropylene & 316SS for Maximum Chemical Resistance • Desmopan & HPS Diaphragms • Oil Sight Gauge • Pressures to 218 PSI (290 PSI on DP43P) • 140° F. Maximum Temperature.

1042.52 810.70 1063.96 896.46

High Pressure Diaphragm Pump

BU DP291 29.1 725 550 14 BU DP407.2 40.7 725 550 20 BU DP407.2VP 40.7 725 550 20 BU DP-321054

3 Diaphragm Pump, 1-3/8” Spline Shaft Each End, 1-1/2” HB Suction x 3/4” Discharge.............. $ 1366.80 4 Diaphragm Pump, 1-3/8” 6-Spline Shaft Each End, 1-1/2” HB Suction x 3/4” Discharge.............. 2562.08 4 Diaphragm Pump, 35mm Shaft, 1-1/2” HB Suction x 3/4” Discharge................................................ 2499.10

6:1 Gear Reduction Kit for DP407.2VP...............................................................................

DP43P

402.00

Pressure Control Units

Part No. RETAIL BU SC-1066-2 Pressure Control Unit (Less Gauge) for DP43P & DP43-GRP Pumps: (2) 3/8” Outlets with Main Shuf-Off Valve & Pressure Regulator. 6.6 GPM & 290 PSI.......................................... $ 91.12 BU SC-2420-3

Pressure Control Unit (With Gauge) for DP193PP, DP282P & DP332P Pumps: (3) 3/4” Outlets with Individual Shut-Off Valves, Main Shut-Off Valve & Pressure Regulator. 42 GPM & 290 PSI

406.02

BU SC-1480-3

Pressure Control Unit for DP291 & DP407.1: (3) 1/2” Outlets with with Individual Shut-Off Valves, Main Shut-Off Valve & Pressure Regulator................................

367.16

SC-2420-3

Gear Reduction Units & Hydraulic Motor Adapters

Part No. RETAIL BU DP-321003 Gear Reduction Unit for DP193PP, DP282P & DP332P Pumps; Fits 5 HP Gas Engine with 3/4” Keyed Shaft................................................................................ $ 491.78 BU DP-31874897 BU DP-31874997 BU DP-31155907 BU DP-86357500

Hydraulic Motor Adapter (SAE “B”) for DP43P Pump.................................................................. Hydraulic Motor Adapter (SAE “B”) for DP193PP, DP282P & DP332P Pumps........................... “Spacer” for Gear Reduction Unit & Hydraulic Motor Adapter for DP282P & DP332P Pumps (req’d). Bolts for “Spacer” Above (4 Required) ........................................................................................

SC-1066-2

466.32 355.10 182.24 6.30

Pumps For Grounds Care, Trees, Nurseries, Road Side, Pest Control & Golf Courses These Rugged Piston Pumps have cast iron cases, with hardened crankshafts and ball-type main bearings which are seated in oil for long life, non-wear ceramic cylinders and spring loaded disc-type stainless valves. Bean R10 Specs: 2 Pistons - 1-5/8" Diameter • 10 GPM • 500 PSI • 580 MAX RPM - 306 MIN RPM

Bean R2020 Specs: 4 Pistons - 1-5/8" Diameter • 20 GPM • 500 PSI • 580 MAX RPM - 390 MIN RPM R2020 Features:

R10 Features:

• Two cylinder positive displacement pump. • Non-wearing ceramic cylinders for long life & corrosion resistance. • Melonized forged crankshaft for increased fatigue, strength & durability, mounted on heavy-duty ball bearings. • Aluminum die-cast connecting rods with automotive type replaceable bearing inserts. • Positive action, disc-type stainless steel hardened valves & seats.

PUMPS Part No. BN R10 BN R2020

GPM 10 20

PSI 500 500

PISTON 2 4

Wt. 52 lbs. 95 lbs.

• Four cylinder vertical reciprocating displacement pump. • Ceramic cylinders are diamond-honed for a smooth, long life, wear resistant surface. • Positive action spring loaded disc type stainless steel valves and valve seats. • Melonized hardened alloy steel crankshafts. • All bearings on the drive shafts are maximum duty type, with double row bearing on the drive end.

RETAIL $ 3300.42 4346.96

Repair Kits for FMC Bean Pumps For Pump No's Use Valve Kit RETAIL Use Packing Kit RETAIL BN R5A BN 17042 $ 121.94 BN 5251829 $ 97.82 BN R5B BN 17042 121.94 BN 5251828 107.87 BN R10, RH10 BN 17042 121.94 *BN 17043 81.07 BN R20, R2020 * BN 17042 121.94 * Requires a quantity of 2 Kits.

Viton® is a registered trademark of DuPont Performance Elastomers

DULTMEIER SALES • OMAHA, NE

(800) 228-9666

•

www.dultmeier.com

• DAVENPORT, IA

(800) 553-6975

E0724

12 & 115 Volt Diaphragm Pumps

160

12 Volt & 115 Volt Diaphragm Pumps (5.3 GPM)

12 Volt & 115 Volt Diaphragm Pumps (2.2 GPM)

HD 5500 Series

HD 3300 Series

For Use with a Wide Variety of Applications

• 5.3 GPM Max; 3.8 GPM @ 40 PSI • “Demand Style” Pressure Switch; cut in 45 PSI; cut out 60 PSI • “By-Pass” Style Also Available • 12-Volt DC or 115V AC • 1/2" FPT Or 3/4” Quick Tach Ports D • 5 Chamber Diaphragms • Polypropylene Housing, Viton® Valves, Santoprene Diaphragm • Amp Draw at 0 PSI = 5.5 Amp Draw at 60 PSI = 18.0 (water) Part No. Max. GPM Ports Control Voltage RETAIL AQ 550 5.3 1/2" FPT Demand 12V $ 185.93 AQ 550-110V 5.3 1/2” FPT Demand 115V 285.42 AQ 550-GEO 5.3 1/2” FPT ** Demand 12V 210.38 AQ 550-HB 5.3 3/4” Quick Tach * Demand 12V 185.93 AQ 551 5.3 1/2” FPT Bypass 12V 196.65 AQ 551-HB 5.3 3/4” Quick Tach * Bypass 12V 187.27 AQ 551-110V 5.3 1/2” FPT Bypass 115V 285.42

• Use for Ag/Turf Spray, Industrial Spray & Transfer & General Purpose • “Demand Style” Pressure Switch (Cut Out at 60 PSI, Cut In at 45 PSI) D • 12-Volt DC & 115V AC • Low Amp Draw Only, 5.5 Amps at 60 PSI • Self-Priming to 8’ Suction Lift • 3 Chamber Diaphragm Design • Polypropylene Housing, Viton® Valves, Santoprene Diaphragms (Select Geolast Diaphragms for Diesel, Transmission Fluid, Light Oils & AntiFreeze - Not for Flammable Liquids) • Lightweight (6 lbs.); 7” Long Wire Leads with 2 Pin Connector; Rated to 140° F. • 115V Models Include 4’ Cord with Plug

* Requires use of QT hose barb connectors. ** GEO includes Geolast diaphragms for diesel & other petroleum base liquids (Not for flammable liquids).

“FatBoy” 12-Volt Pumps (7.0 GPM) Fatboy Diaphragm Pumps feature selfpriming design with priming capacity to 14’. Available in either Demand or Bypass styles. Polypropylene housing with Viton® valves and S a n t o p r e n e d i a p h ra g m s fo r added chemical compatibility. 7 GPM at 10 PSI; 5 GPM at 60 PSI. Motors are 12VDC, totally enclosed, non-vented. Maximum temperatures to 140° F. Lead wires are 14AWG,12” long. Ports are 1/2” FPT or 3/4” Quick Tach. 19 Amps Draw at 60 PSI (water) 15 Amps Draw at 40 PSI (water)

Max. Max. Flow Part No. Control PSI GPM @ 60 PSI

Wt.

Part No. Ports AQ 3323 3/8” FPT AQ 3313 * 3/4” QT AQ 3323-GEO ** 3/8” FPT AQ 3323-1E1 3/8” FPT AQ 3323-GEO-115V 3/8” FPT

FQ5S Straight Hose Barb with O-Ring

Part No. AQ FQ5S-12 AQ FQ5E-12 AQ FQ5S-34 AQ FQ5E-34

RETAIL

FQ5E Elbow Hose Barb with O-Ring

Description RETAIL 3/4” Straight QT x 1/2” Hose Barb Fitting.......... $ 5.11 3/4” Elbow QT x 1/2” Hose Barb Fitting............ 5.11 3/4” Straight QT x 3/4” Hose Barb Fitting.......... 12.06 3/4” Elbow QT x 3/4” Hose Barb Fitting............ 12.06

12-Volt Pump Kit for Fertilizer Placement This 12-Volt Diaphragm Pump Kit is ideal for starter fertilizer placement, herbicide banding and lawn care spraying.

Features: High Volume, 4.8 GPM Open Discharge; 3.0 GPM at 45 PSI • 4 Piston Diaphragm • Chemically resistant: Glass-filled polypropylene, Santoprene diaphragms, Viton® seals • Pressure Switch; 35 PSI Cut-in; 45 PSI Cut-out • Weatherproof tested against water, dust & overspray • 18 Amp current draw with fertilizer (13 amps with water).

Includes John Blue 4.8 GPM diaphragm pump at left with inlet strainer. RB14S: A complete pump system including John Blue 4.8 GPM pump, 12-volt motor, (2) Wilger 3999-2 monitors (8-rows total) and a John Blue 35 amp speed controller. Use 10 gauge wiring.

AP1816W

AP1816W includes polycarbonate clear strainer (50 mesh stainless screen) and five assorted 1/2” & 3/4” quick-connect hose barb fittings • Use 13 AWG wire. BU AP1819W BU AP1816W

RETAIL $ 73.03 73.03 94.47 125.29 121.27

* Requires 3/4” Quick-Tach; Order FQ5 Hose Barbs Separately. ** GEO Includes Geolast Diaphragms for Diesels & Other Petroleum Base Liquids. (Not for flammable liquids).

12 Volt Diaphragm Pumps

GPM

Control Voltage Demand 12V Demand 12V Demand 12V Demand 115V Demand 115V

Quick Tach Fittings with O-Rings for Remco Pumps

AQ 770 Demand 60 7.0 4.4 GPM 8 lbs. $ 361.80 AQ 771 Bypass 60 7.0 4.4 GPM 8 lbs. 361.80 AQ 773 * Demand 60 7.0 4.4 GPM 8 lbs. 361.80 * Requires 3/4” Quick-Tach Hose Barbs - See Right for Options.

Part No.

Max. Max. GPM Pressure 2.2 60 PSI 2.2 60 PSI 2.2 60 PSI 2.2 60 PSI 2.2 60 PSI

Ports

Strainer

4.8 1/2” MPT 4.8 1/2” & 3/4” Hose Barbs

No Yes

RETAIL

Complete With Pump with 12 Volt Motor, Controller and (2) 4 Row Spray Monitors (Note: Plumbing & Orifice Discs NOT Included in Kits) Part No. 12-Volt Pump Kit Includes: Wt. DU RB14S Complete Diaphragm Pump with Motor, Controller & (2) 4 Row Spray Monitors.... 20 lbs.

$ 259.96 259.96

RETAIL $ 933.98

Viton® is a registered trademark of DuPont Performance Elastomers

IND

DULTMEIER SALES • OMAHA, NE

(800) 228-9666

•

www.dultmeier.com

• DAVENPORT, IA

(800) 553-6975

E0693

FloJet Electric Diaphragm Pumps Motor Driven Diaphragm Pumps

161

Pumps are available in either 115 volt or 12 volt, (230 and 24 volt on special request). Pumps are available in two styles:

12-Volt/115-Volt • Capacities to 7 GPM • Pressures to 150 PSI These pumps are the perfect choice for chemical transfer, carpet cleaning, car/truck wash applications, livestock cooling and many more. Excellent self-priming capabilities and can be run dry. Diaphragms and check valves are available in Buna, Santoprene®, EPDM and Viton® as noted. Available in either Demand or Bypass styles. Note: Many models are available in addition to those shown below - Call for Pricing & Availability.

Bypass

Pump continues to run and internally bypasses if discharge is partially or fully closed.

Demand

Pressure switch automatically starts and stops pumps at specific pressure settings.

Demand Pumps are supplied with pressure actuated switches that provide on/off control within certain pressure ranges. Bypass Pumps are designed to internally bypass when discharge is closed or partially closed. 115 Volt Demand Pumps with Pressure Switch * Max. Part No. Volts GPM Control FJ 3811-033A 115 V 1.50 Demand FJ 3811-043A 115 V 1.50 Demand FJ 2100-032 115 V 1.70 Demand FJ 2130-533 115 V 1.80 Demand FJ 2100-022 115 V 1.85 Demand FJ D3635E7011A 115 V 1.90 Demand FJ D3835V5011 115 V 2.0 Demand FJ 2130-032 115 V 2.0 Demand FJ 4300-042 115 V 3.0 Demand FJ 4300-501A 115 V 3.0 Demand FJ 4300-043 115 V 4.5 Demand * Open Flow Discharge.

Pressure On Off Internals Ports RETAIL 100 150 Santo/Viton® 3/8” FPT $ 243.88 100 150 Santo/EPDM 3/8” FPT 237.18 45 60 Santo/EPDM 3/8” FPT 233.16 60 95 EPDM 1/4” FPT 297.48 45 60 Viton®/Viton® 3/8” FPT 237.18 60 100 EPDM 3/8” FPT 227.80 45 60 Viton®/Viton® 3/8” FPT 210.38 60 95 EPDM 1/4” FPT 301.50 30 45 Santo/EPDM 1/2” HB 166.16 30 45 Santo/Viton® 1/2” HB 235.84 30 45 Santo/EPDM 3/4” HB 159.46

3711 Series

12 Volt Demand Pumps with Pressure Switch * Max. Part No. Volts GPM Control FJ LF122202 12 V 1.0 Demand FJ LFP122201D 12 V 1.0 Demand FJ 3711-142A 12 V 1.5 Demand FJ 3711-132A 12 V 1.5 Demand FJ 3811-143A 12 V 1.5 Demand FJ 3811-133A 12 V 1.5 Demand FJ 2100-122 12 V 2.5 Demand FJ 4300-500 12 V 3.0 Demand FJ 4300-143 12 V 4.5 Demand FJ 4300-504 12 V 4.5 Demand FJ R8600144A 12 V 6.0 Demand * Open Flow Discharge.

Pressure On Off Internals Ports RETAIL 25 35 Santo/EPDM 3/8" HB $ 91.12 25 35 Santo/Viton® 3/8" HB 95.81 70 100 Santo/EPDM 3/8” FPT 170.18 70 100 Santo/Viton® 3/8” FPT 188.94 100 150 Santo/EPDM 3/8” FPT 213.06 100 150 Santo/Viton® 3/8” FPT 215.74 IND 45 60 Viton®/Viton® 3/8” FPT 222.44 30 45 Santo/Viton® 1/2” HB 148.74 30 45 Santo/EPDM 3/4” HB 163.48 30 45 Santo/Viton® 3/4” HB 142.04 40 70 Santo/EPDM 3/4” HB 257.28

2100-032

Bypass Pumps with Internal Flow Bypass Part No. Volts FJ D1625F1411 115 V FJ D21X003 12 V FJ D3131V5011 12 V FJ D2131I1311A 12 V FJ D3135E7011A 12 V * Open Flow Discharge.

* Max. GPM 1.4 1.6 1.6 1.8 2.0

Max. PSI Internals 70 Santo/Viton® 60 Santo/Viton® 60 Viton®/Viton® 50 Buna/Viton® 100 EPDM

Ports 3/8" FPT 3/8” FPT 3/8” FPT 3/8” FPT 3/8” FPT

RETAIL $ 196.98 164.82 164.82 164.82 203.68

Max. PSI Internals Ports 60 Buna 3/8" FPT 50 Buna 3/8" FPT

RETAIL $ 203.68 160.80

4300-500

Pumps with No Switches or Bypass Part No. Volts FJ 2100-910 12 V FJ D31X015F 12 V * Open Flow Discharge.

* Max. GPM 1.9 2.0

Repair Kits Part No. FJ 20914-003A FJ 20028-035 FJ 20028-053 FJ 20407-020 FJ 20407-030 FJ 20403-040 FJ 21010-101 FJ 21010-103 FJ 21010-104 FJ 2090103 FJ 2095100 FJ 2090115

FLOJET Repair Kits Check Valve Kit, 2100/2135 Series, EPDM................. Check Valve Kit, 2100/2135 Series, VITON® ............. Check Valve Kit, 2130/2135 Series, EPDM ................ Check Valve Kit, 4300 Series, VITON® ...................... Check Valve Kit, 4300 Series, EPDM ......................... Diaphragm Kit, 4300 Series, SANTOPRENE® .......... Diaphragm Kit, 2100/2130 Series, VITON® ............... Diaphragm Kit, 2100/2130 Series, EPDM .................. Diaphragm Kit, 2100/2130 Series, SANTOPRENE® . Pressure Switch, 45 PSI ............................................ Pressure Switch Kit, All Demand Pumps, 60 PSI ...... Pressure Switch Kit, All Demand Pumps, 95 PSI ......

R8600

Polypropylene Quick Connect Fittings RETAIL $ 22.24 34.51 21.98 47.24 34.51 25.19 51.93 29.75 26.67 49.58 49.58 49.58

for Flojet 4000, G Series & Aquatec Pumps EPDM Elastomers Standard

Part No. RETAIL FJ 20381-026 Quick Connect x 3/8" HB Straight, Pair.... $ 5.36 FJ 20381-002 Quick Connect x 1/2” HB Straight, Pair.... 5.36 FJ 20381-003 Quick Connect x 5/8" HB Straight, Pair.... 4.69 FJ 20381-006 Quick Connect x 3/4" HB Straight, Pair.... 5.36 FJ 20381-009 Quick Connect x 1/2" HB, 90˚, Pair.......... 5.36 FJ 20381-010 Quick Connect x 3/4" HB, 90˚, Pair.......... 5.36 FJ 20408-000 Side Clips - Package of 2......................... 9.11 Viton® & Other Styles Available

Viton® is a registered trademark of DuPont Performance Elastomers - ®Santoprene is a registered trademark of Mansanto Co.

IND

DULTMEIER SALES • OMAHA, NE

(800) 228-9666

•

www.dultmeier.com

• DAVENPORT, IA

(800) 553-6975

E0732

Electric Diaphragm & 12-Volt Pumps • Fittings

162

ShurFlo Pumps for a wide variety of low pressure applications. Pumps are available in 12/24/115V with EPDM, Viton® or Santoprene internals. Adjustable demand switch for automatic shut-off or internal by-pass without a switch. Maximum temperature is 170° F. Note: Pumps are not warranted for chemical compatibility. Buna is the best choice for petroleum products.

Diaphragm Pumps 12-VOLT / 115-VOLT / 24 VOLT

SLV10 Series

Capacities to 7.0 GPM • Pressures to 100 PSI

Part No. SHURflo REPAIR KITS & Accessories RETAIL SU 94-395-05 Diaphragm Kit, Viton®, for 8000 Series ............ $ 67.67 SU 94-395-06 Diaphragm Kit, Santoprene, for 8000 Series...... 22.65 SU 94-238-04 Diaphragm Kit, Santoprene, for 2088 Series...... 41.21 SU 94-238-03 Diaphragm Kit, Santoprene, for 4111 & 4211..... 41.21 SU 94-232-00 Valve Kit, Santoprene, for 2088 Series............... 21.71 SU 94-232-05 Valve Kit, Viton®, for 2088, 4111 & 4211 Series 57.96 SU 94-390-05 Valve Kit, Viton®, for 8000 Series ..................... 50.25 SU 94-390-08 Valve Kit, EPDM, for 8000 Series....................... 27.34 SU 94-391-09 Valve Kit, Viton®, for 8000 By-Pass Series ...... 56.95 SU 94-231-05 Pressure Switch Kit for 2088 Series................... 64.66 SU 94-375-05 Pressure Switch Kit for 8000 Series .................. 32.56 SU 94-230-40 Pressure Switch Kit for 4111 & 4211.................. 36.18 SU 255-223 1/2" HB x FPT 50 Mesh Inlet Strainer ............... 10.05

4211-035 D

8000-543-250 D

2088-343-135

Many Other Models Available

Viton® is a registered trademark of DuPont Performance Elastomers

Max. * Max. Cut out Cut In Max. Operating Part No. Volts GPM Control Pressure Pressure Pressure Ports SU SLV10-AA40 ** 12-DC 0.88 Demand & On/Off 25 40 30 PSI 3/8” HB SU SLV10-AA41 ** 12 DC 0.88 Demand 25 40 30 PSI 3/8” HB SU 100-000-21 12-DC 1.0 No Switch NA 10 15 PSI 3/8” HB SU 4211-035 ** 12-DC 6.25 Demand 45 30 40 PSI 1/2” MPT SU 2088-313-145 12-DC 3.6 Demand 45 25 40 PSI 1/2” MPT SU 2088-343-135 12-DC 3.0 Demand 45 25 40 PSI 1/2” MPT SU 2088-343-500 12-DC 3.3 No Switch NA NA 50 PSI 1/2” MPT SU 2088-443-144 12-DC 3.5 Demand 45 25 40 PSI 1/2” MPT SU 2088-474-144 24-DC 3.0 Demand 45 NA 40 PSI 1/2” MPT SU 2088-514-144 12-DC 4.0 Demand 45 25 40 PSI 1/2” MPT SU 2088-514-500 12-DC 4.0 By-Pass 45 NA 50 PSI 1/2” MPT SU 2088-594-154 115-AC 3.3 Demand 45 25 40 PSI 1/2” MPT SU 5050-1311D011 12-DC 5.0 Demand 60 NA 60 PSI 1/2” MPT SU 5050-2301C011 12DC 5.0 By-Pass 50 40 65 PSI 1/2” MPT SU 5050-2301G011 24-DC 5.0 By-Pass 50 40 65 PSI 1/2” MPT SU 8000-151-296 24-DC 1.0 Demand 60 45 60 PSI 3/8” FPT SU 8000-343-236 12-DC 1.2 Demand 60 45 60 PSI 3/8" FPT SU 8000-532-256 115-AC 1.4 Demand & ByPass 60 45 60 PSI 3/8" FPT SU 8000-533-236 115-AC 1.4 Demand 60 45 60 PSI 3/8" FPT SU 8000-533-250 115-AC 1.4 By-Pass 45 NA 50 PSI 3/8" FPT SU 8000-543-236 12-DC 1.8 Demand 60 45 60 PSI 3/8” FPT SU 8000-543-238 12-DC 1.8 Demand 100 80 100 PSI 3/8” FPT SU 8000-543-250 12-DC 1.8 By-Pass 45 NA 40 PSI 3/8” FPT SU 8000-633-236 115-AC 1.4 Demand 60 45 60 PSI 3/8" FPT SU 8000-643-236 12-DC 1.5 Demand 60 45 60 PSI 3/8" FPT SU 8000-812-288 115-AC 1.3 Demand & Bypass 100 80 100 PSI 3/8” FPT SU 8000-813-238 115-AC 1.6 Demand 100 80 100 PSI 3/8” FPT SU 8005-233-236 115-AC 1.5 Demand 60 45 60 PSI 3/8" FPT SU 8005-733-255 115-AC 1.5 Demand 60 45 60 PSI 3/8” FPT SU 8030-813-239 12-DC 1.5 Demand 150 80 150 PSI 3/8” MPT SU 8030-863-239 115-AC 1.5 Demand 150 80 150 PSI 3/8” FPT SU 8030-863-299 115-AC 1.5 Demand & Bypass 150 80 150 PSI 3/8” FPT * Open Flow.

** Intermittent Use Only.

Polypropylene Swivel Fittings

12-Volt Pump Units Data Below for is Water. Take PSI & Amps Shown X 1.4 for Fertilizer Use.

with Wingnut for Hose & Tube on ShurFlo Pumps

Models 4001NEH and 4001XLEH

Volts 13.5 (Alternator) Engine Running

PSI AMPS GPM 0 13.4 10.4 5 14.8 9.9 10 16.2 9.4 15 18.2 8.9 20 20.5 8.5 25 22.5 8.2 30 24.9 7.7

Hypro 12-Volt Roller Pump Units are ideal for fertilizer placement, herbicide banding and lawn care spraying. Standard Features: Ni-Resist or Silvercast® Pump Bodies • Viton® Seals • Super Rollers • 12-Volt Motors are rated for Continuous Duty • Maximum Pressure is 35 PSI continuous, 50 PSI Intermittent • 3/4” NPT Ports. Use Silvercast® or Roundup.™ Part No. Wt. RETAIL HY 4001NEH Pump/Motor, Ni-Resist Pump..................... 18 lbs. $ 683.40 HY 4001XLEH Pump/Motor, SilverCast® Pump................. 18 lbs. 828.12 HY 4001NH NI-Resist Pump Only (1/2” I.D. Shaft)......... 5 lbs. 335.00 HY 4001XLH SilverCast® Pump Only (1/2” I.D. Shaft)..... 5 lbs. 479.72 HY 2570-13 12-Volt Motor ONLY.................................... 14 lbs. 419.42 * Use 35 Amp Controllers Shown this Page for 4000 Pump Applications.

IND

DULTMEIER SALES • OMAHA, NE

(800) 228-9666

Valves Diaphragm RETAIL Viton® Santoprene $ 75.71 Viton® Santoprene 71.02 EPDM Nitrile 57.96 Viton® Santoprene 361.80 Viton® Santoprene 254.60 Viton® Santoprene 155.44 Viton® Santoprene 148.74 Santoprene Santoprene 135.34 Santoprene Santoprene 136.68 Santoprene Santoprene 198.32 Santoprene Santoprene 207.70 Santoprene Santoprene 175.54 Viton® Santoprene 222.44 Viton® Santoprene 226.46 EPDM Santoprene/Poly 231.82 Buna Geolast 158.12 Viton® Viton® 168.84 Viton® Santoprene 171.52 Viton® Santoprene 175.54 Viton® Santoprene 164.82 Viton® Santoprene 110.55 Viton® Santoprene 132.66 Viton® Santoprene 119.26 Buna Geolast 167.50 Buna Geolast 144.72 Viton® Santoprene 195.64 Viton® Santoprene 187.60 EPDM Santoprene 152.76 EPDM Santoprene 150.08 Viton® Santoprene 199.66 Viton® Santoprene 214.40 Viton® Santoprene 223.78

90° Elbow Straight

Part No. RETAIL SU 816201 1/2" FPT X 3/8" HB Straight ..................... $ 1.34 SU 816101 1/2" FPT X 1/2" HB Straight ..................... 1.34 SU 815901 1/2" FPT X 3/8" HB 90° Elbow ................. 1.34 SU 815801 1/2" FPT X 1/2" HB 90° Elbow ................. 1.34 SU 815501 1/2" FPT X 5/8" HB 90° Elbow ................. 1.34 SU 815701 1/2" FPT X 3/4" HB 90° Elbow ................. 1.34 SU 244-5286 1/2" MPT X 3/8" MPT Strainer Adapter ... 1.50

•

www.dultmeier.com

• DAVENPORT, IA

(800) 553-6975

E0262

Speed Controllers • Air Operated Diaphragm Pumps

Air-Operated Diaphragm Pumps

12-Volt Speed Controllers for 12-Volt DC Motor Driven Pump Units D

These controllers work with 12-Volt pumps to provide precise control over a wide RPM range. Dial in the desired operating pressure and the pump will maintain a constant flow. 15 & 35 Amp units include external gauge with 10’ battery lead and 20’ main harness. These controllers are reverse polarity protected.

AKSC35-201

GRACO Air-Operated Diaphragm Pumps are designed for a wide variety of chemicals, solutions, coatings, solvents or abrasives. Ideal for tough, viscous products. Air supply range is 25 - 100 PSI (125 PSI for 1” and larger). Features: Polypropylene, Aluminum or Kynar Bodies with Buna, Hytrel, Santoprene or Teflon diaphragms • Seal-less, leak-proof design prevents fluid waste or spills • Pumps can run dry without damage • Air drive means no electrical hazards • Lightweight and portable for multi-location use • Poly, Kynar and Aluminum pumps with Santoprene diaphragms are rated to 180° F. and pumps with Teflon diaphragms are rated to 220° F. • Limited number of parts means fast repairs.

Husky 205 Series

Part No. RETAIL BU AKSC15-201 12 Volt 15A Speed Controller........ $ 339.02 BU AKSC35-201 12 Volt 35A Speed Controller *...... 478.38 * Use with larger pumps (5 GPM +).

1/4” Ports 1.5mm Solids (5 GPM)

12-Volt Speed Controllers

RRC15-NGK

163

Husky 515 Series 1/2” Ports 2.5mm Solids (15 GPM)

Remco 15 & 35 Amp Speed Controller Kits provide smooth, reliable operation of 12 Volt pumps across a wide range of different speeds. Each controller kit includes 20’ cable plus 10’ power cable. On-Off Switch and manual rheostat for accurate speed and pressure control. Fused & reverse polarity protection. Kits with pressure gauges include external gauge and mounting bracket.

Husky 1050 Series 1” Ports 3.2mm Solids (50 GPM)

Part No. RETAIL AQ RRC15-NGK 15 Amp Speed Controller Kit, No Gauge......... $ 274.70 AQ RRC15-60GK 15 Amp Speed Controller Kit, 60 PSI External Gauge / Bracket................................. 363.14 AQ RRC35-NGK 35 Amp Speed Controller Kit, No Gauge......... 367.16 AQ RRC35-60GK 35 Amp Speed Controller Kit, 60 PSI External Gauge / Bracket................................. 392.62 AQ EXT20 20’ Output Ext. Cable (No Liquid Tube Extension) 155.11

Husky 1590 Series D

12-Volt Digital Speed Controller

1-1/2” Ports 4.8mm Solids (100 GPM)

for 12-Volt DC Motor Driven Pump Units Max. Part No. Ports Pump Body Diaphragm Flow RETAIL GY D12096 1/4" FPT Polypropylene Santoprene 5 GPM $ 330.98 GY D12091 1/4" FPT Polypropylene Teflon 5 GPM 489.10 GY D150A1 1/4" FPT Kynar Teflon 5 GPM 628.46 GY D32966 3/8” FPT Polypropylene Santoprene 7 GPM 481.06 GY D32955 3/8” FPT Polypropylene Hytrel 7 GPM 506.52 GY D32911 3/8” FPT Polypropylene Teflon 7 GPM 615.06 GY D52966 1/2” FPT Polypropylene Santoprene 15 GPM 625.78 GY D52955 1/2” FPT Polypropylene Hytrel 15 GPM 621.76 GY D52911 1/2” FPT Polypropylene Teflon 15 GPM 866.98 GY D55A11 1/2” FPT Kynar Teflon 15 GPM 1317.22 GY D53277 3/4” FPT Aluminum Buna 16 GPM 812.04 GY D53366 3/4” FPT Aluminum Santoprene 16 GPM 774.52 GY D53211 3/4” FPT Aluminum Teflon/EPDM 16 GPM 913.88 GY 647074 1” FPT Aluminum Buna 50 GPM 1201.98 GY 647035 1” FPT Aluminum Santoprene 50 GPM 1105.50 GY 647075 1” FPT Aluminum Teflon/EPDM 50 GPM 1311.86 GY 649029 1” ANSI Flange Polypropylene Santoprene 50 GPM 1295.78 GY 649034 1” ANSI Flange Polypropylene Teflon 50 GPM 1472.66 GY 649390 1” ANSI Flange Kynar Teflon 50 GPM CALL GY DB2911 1-1/2” Flange Polypropylene Teflon 100 GPM 3474.62 GY DB2966 1-1/2” Flange Polypropylene Santoprene 100 GPM 3186.52 GY DB5A11 1-1/2” Flange Kynar Teflon 100 GPM 6714.74 GY DB3777 1-1/2” FPT Aluminum Buna 100 GPM 1337.32 GY DF2911 2” Flange Polypropylene Teflon 150 GPM 4983.46 GY DF2966 2” Flange Polypropylene Santoprene 150 GPM 4681.96 GY DF5A11 2” Flange Kynar Teflon 150 GPM 10423.86 GY DF3777 2” Flange Aluminum Buna 150 GPM 1703.14 GY 652036 3” Flange Aluminum Santoprene 275 GPM 3367.42

FEATURES: • No pressurized fertilizers or chemicals in the tractor cab. • Controls motor speed on any 12-Volt pump to vary output over a wide range of RPM’s. • Illuminated easy-to-read digital display. • Remote sending unit, 1/4” NPT fitting & 20’ wiring harness included (Optional 15’ extension harness available). • Reverse polarity protection & in line fuse. Run/hold feature for use with whisker switches. AKSC35-202 Part No. RETAIL BU AKSC35-202 12 Volt 35 Amp Digital Controller Kit $ 615.06 BU AKSCP-031 20 Foot Extension Cable.................. 133.33

SERVICE & REPAIRS Did you know? We can service almost every brand of pump we sell in our catalog. Call us at 1-800-228-9666 (Omaha, NE) for a quote!

IND

DULTMEIER SALES • OMAHA, NE

(800) 228-9666

•

www.dultmeier.com

• DAVENPORT, IA

(800) 553-6975

E1045

Air Operated Diaphragm Pumps

164

Yamada® Global Series Diaphragm Pumps

Yamada® Air Operated Diaphragm Pumps DP & NDP Series

Ideal for Lighter Transfer Applications G Series Air-Powered Diaphragm Pumps from Yamada feature new technology and engineering for a more competitive AOD pump. The perfect choice when on/off cycling is required. Ideal for lighter transfer applications.

Air-Powered, Double-Diaphragm Pumps are unique, simple, safe.These pumps will handle practically anything that will flow. Multi-purpose pumps are available for almost every plant in every industry. Abrasive and corrosive fluids can be handled without problems.

Features Include: Stall-free spool design • No lubrication required • 30% less air consumption • Ease of repair • Critical reliability for on/off cycling • Aluminum, Stainless or “Pure” Polyethylene bodies • Santoprene, Buna or Teflon diaphragms • Designed for drop-in replacement of common AOD pumps • 20-100 PSI air supply. Made in USA.

NDP-15FPT

Pumps shown have Polypropylene, Aluminum, Stainless or Kynar bodies (poly is standard unless noted) and either Teflon, Neoprene, Hytrel , Viton® or Buna diaphragms and valves. Pumps are rated from 140° F. to 212° F. depending on body and diaphragm type. Pumps have an air supply range from 20 to 70 PSI. For higher temperatures or other compatibility requirements, Stainless Steel bodies and sizes up to 3" are also available.

G25AN

STANDARD FEATURES: Air Driven-Intrinsically Safe. Air drive allows you to be free from electrical hazards or explosionproof motor requirements.

G15 Series are rated to 15 GPM @ 18 SCFM and up to 100 PSI. Rated to 180° F. with Buna and Santoprene or 212° F. with Teflon diaphragms. Handles solids up to 1/32”. 15’ lift on rubber, 12’ lift on teflon.

Excellent Wear Resistance & Minimum Maintenance. Without moving parts in contact with the liquids or rotating parts to wear, the pump is almost maintenance free. Self-Priming, Dry Start. Completely self-priming. Also, if liquid source runs dry, the pump can continue to operate without damage from overheating or friction wear unit further liquid is available.

Flow Control. Infinitely variable flow control can be regulated by simply opening or closing a valve on the discharge, or by increasing or decreasing the air supply.

G15AN

High Lift and Distance Transfer. Because pumps are designed at a 1:1 ratio, discharge pressures are equal to the air inlet pressure. Pressure from 20 to 100 PSI.

G15PS G15PT G25 Series are rated to 37 GPM @ 30 SCFM and up to 100 PSI. Rated to 180° F. Handles solids up to 1/8”. Part No. Ports Construction YA G15PS 1/2” FPT Poly/Santo YA G15PT 1/2” FPT Poly/Teflon YA G15AN 1/2" FPT Alum/Buna YA G15AT 1/2” FPT Alum/Teflon YA G15SS 1/2” SS/Santo YA G15ST 1/2” SS/Teflon YA G25AN 1” FPT Alum/Buna

IND

Max. Max. Flow PSI Wt. RETAIL 15 GPM 100 12 lbs. CALL 15 GPM 100 12 lbs. $ 487.76 15 GPM 100 12 lbs. 454.26 15 GPM 100 12 lbs. 852.24 15 GPM 100 18 lbs. 1408.34 15 GPM 100 18 lbs. 1553.06 37 GPM 100 17 lbs. 531.98

DULTMEIER SALES • OMAHA, NE

(800) 228-9666

•

Versatile Material Handling. Product capabilities range from clear water to highly viscous, abrasive or aggressive materials. Body/ Max. Part No. * Ports Diaphragm Flow Wt. RETAIL YA NDP-5FPT 1/4" FPT Poly/Teflon 3.4 GPM 3 lbs. $ 293.46 YA NDP-5FVT 1/4" FPT Kynar/Teflon 3.4 GPM 4 lbs. 766.48 YA NDP-5FST 1/4” FPT 316SS/Teflon 3.4 GPM 6 lbs. 830.80 YA DP-10BPH 3/8" FPT Poly/Hytrel 6 GPM 7 lbs. 485.08 YA DP-10BPT 3/8" FPT Poly/Teflon 6 GPM 7 lbs. 531.98 YA NDP-15BAN 1/2" FPT Alum/Buna 13 GPM 9 lbs. 710.20 YA NDP-15FPS 1/2" FPT Poly/Santoprene 13 GPM 8 lbs. 507.86 YA NDP-15FPT 1/2" FPT Poly/Teflon 13 GPM 8 lbs. 530.64 YA NDP-15FVT 1/2" FPT Kynar/Teflon 13 GPM 10 lbs. 1041.18 YA NDP-20BAN 3/4” FPT Alum/Buna 32 GPM 20 lbs. 822.76 YA NDP-20BPT 3/4" FPT Poly/Teflon 32 GPM 15 lbs. 1070.66 YA NDP-20BST 3/4” FPT 316SS/Teflon 32 GPM 27 lbs. 1842.50 YA NDP-25BAN 1” FPT Alum/Buna 46 GPM 29 lbs. 954.08 YA NDP-25BAH 1" FPT Alum/Hytrel 46 GPM 29 lbs. 968.82 YA NDP-25BPT 1” FPT Poly/Teflon 46 GPM 21 lbs. 1318.56 YA NDP-25BST 1” FPT 316SS/Teflon 46 GPM 44 lbs. 2473.64 YA NDP-25BVT-PN 1” FPT Kynar/Teflon 46 GPM 26 lbs. 2334.28 YA NDP-32BAN 1-1/2” FPT Alum/Buna 50 GPM 29 lbs. 1085.40 YA NDP-32BAT 1-1/2” FPT Alum/Teflon 50 GPM 29 lbs. 1507.50 YA NDP-40BAN **1-1/2" Flg/FPT Alum/Buna 107 GPM 64 lbs. 1349.38 YA NDP-40BPN *1-1/2” Flange Poly/Buna 107 GPM 60 lbs. 2525.90 YA NDP-40BPT *1-1/2” Flange Poly/Teflon 107 GPM 60 lbs. 3069.94 YA NDP-40BST *1-1/2” Flange 316SS/Teflon 107 GPM 88 lbs. 4525.18 YA NDP-40BVT *1-1/2” Flange Kynar/Teflon 107 GPM 70 lbs. 6500.34 YA NDP-50BAN +2"ANSI/FPT Alum/Buna 164 GPM 82 lbs. 1650.88 YA NDP-50BAT +2"ANSI/FPT Alum/Teflon 164 GPM 82 lbs. 2604.96 YA NDP-50BPT *2" Flange Poly/Teflon 164 GPM 81 lbs. 4329.54 YA NDP-50BST 2” FPT 316SS/Teflon 164 GPM 132 lbs. 6440.04 YA NDP-80BAN +3”ANSI/FPT Alum/Buna 215 GPM 143 lbs. 2539.30 YA NDP-80BAT +3”ANSI/FPT Alum/Teflon 215 GPM 143 lbs. 4314.80 YA NDP-80BPT *3” Flange Poly/Teflon 215 GPM 141 lbs. 8480.86 YA NDP-80BST-NPT 3” FPT 316SS/Teflon 215 GPM 225 lbs. 10111.64 ** 1-1/2 Flanged & Tapped 1-1/4” FPT. Can Be Plumbed Either Way. + 2” or 3” ANSI Flange Style Tapped 2” or 3” FPT as noted. Can Be Plumbed Either Way. * All Flanged Pumps Accept Flanges that Are Not Included. See Flange Section of Catalog.

www.dultmeier.com

• DAVENPORT, IA

(800) 553-6975

E0260

ARO Air Diaphragm Pumps

165

Air-Operated Diaphragm Pumps from ARO are an ideal choice for transferring difficult fluids and solutions. Industry leading efficiency and reliability. Light weights and easy portability. Seal-less pumps can handle abrasives, solids, corrosives and high viscosities. All pumps have run-dry capability, self-priming design and are easy to install. (All pumps come with mufflers.) Common Industries and Applications are chemical treatment, car and truck wash, paints and coatings, printing and packaging, water and wastewater treatment and a wide variety of industrial applications. Bodies are available in Polypropylene, Kynar (PDVF), Aluminum or Stainless Steel. Diaphragms and wear parts are available in Teflon, Santoprene, Hytrel or Buna Operating pressures up to 125 PSI. Flow rates from 5 to 185 GPM. Industry leading 5-Year warranty. Available from 1/4” to 2” FPT or Ansi flange style as noted. POLY

1/4” AOD Pumps

1” AOD Pumps Polypropylene or Aluminum Bodies

Polypropylene or Kynar Bodies • Rated to 5.3 GPM • Hybrid Ports: 1/4” FPT x 3/4” MPT • Pressures to 125 PSI • Solids to 1/16” • 15’ Suction Lift Part No. Ports Max. Flow AO PE01PPT 1/4” FPT 5.3 GPM AO PD01PPS 1/4” FPT 5.3 GPM AO PD01PKT 1/4” FPT 5.3 GPM

Body Diaphragm Poly Teflon Poly Santoprene Kynar Teflon

• Rated to 47 GPM • Ports: 1” FPT • Pressures to 120 PSI • Solids to 1/8”

Wt. RETAIL 2.9 lbs. $ 333.66 2.9 lbs. 431.48 3.9 lbs. 613.72

3/8” AOD Pumps Polypropylene Bodies

• 19’ Suction Lift ALUMINUM

Part No. AO 661AJS AO 661AJT AO 66100N

Ports 1” FPT 1” FPT 1” FPT

Max. Flow 47 GPM 47 GPM 35 GPM

Body Diaphragm Poly Santoprene Poly Teflon Alum. Buna

Wt. RETAIL 19 lbs. $ 1027.78 19 lbs. 1172.50 21 lbs. 1105.50

POLY

1-1/2” AOD Pumps

• Rated to 10.6 GPM • Ports: 3/8” FPT • Pressures to 100 PSI • Solids to 1/16” • 15’ Suction Lift

Polypropylene, Aluminum or Kynar Bodies

Part No. Ports Max. Flow Body Diaphragm AO PD03PPS 3/8” FPT 10.6 GPM Poly Santoprene AO PD03PPT 3/8” FPT 10.6 GPM Poly Teflon

• Rated to 100 GPM • Ports: 1-1/2” FPT or ANSI Flange Ports • Pressures to 120 PSI • Solids to 1/4” • 14’ Suction Lift

Wt. RETAIL 3.4 lbs. $ 460.96 3.4 lbs. 584.24

1/2” AOD Pumps 1-1/2” FPT ALUMINUM

Polypropylene or Kynar Bodies

Part No. Ports Max. Flow Body Diaphragm Wt. RETAIL AO 66150N 1-1/2” FPT 90 GPM Alum. Buna 38 lbs. $ 1301.14 AO 661T3T 1-1/2” Flange 100 GPM Poly Teflon 42 lbs. 2554.04 AO 661T4K 1-1/2” Flange 100 GPM Kynar Teflon 64 lbs. 5357.32

• Rated to 14.4 GPM • Ports: 1/2” FPT • Pressures to 100 PSI • Solids to 3/32” • 15’ Suction Lift

2” AOD Pumps

POLY

Part No. Ports Max. Flow Body Diaphragm AO PE05PPT 1/2” FPT 14.4 GPM Poly Teflon AO PD05PKT 1/2” FPT 14.4 GPM Kynar Teflon

Wt. RETAIL 5.2 lbs. $ 498.48 6.8 lbs. 1376.18

Polypropylene, Aluminum or Kynar Bodies • Rated to 172 GPM

3/4” AOD Pumps

• Ports: 2” FPT or ANSI Flange Ports • Pressures to 120 PSI

Polypropylene or Aluminum Bodies

• Solids to 1/4” • 14’ Suction Lift

• Rated to 14.8 GPM • Ports: 3/4” FPT • Pressures to 100 PSI • Solids to 3/32” • 15’ Suction Lift

2” FPT ALUMINUM

Part No. Ports AO 66250ES 2” FPT AO 662A3T 2” Flange AO 662A4T 2” Flange

POLY

Part No. Ports Max. Flow AO PD07PPS 3/4” FPT 14.8 GPM AO PD07PPT 3/4” FPT 14.8 GPM AO PD07RAS 3/4” FPT 13.6 GPM

IND

Body Diaphragm Poly Santoprene Poly Teflon Alum. Santoprene

DULTMEIER SALES • OMAHA, NE

Max. Flow 172 GPM 145 GPM 145 GPM

Body Diaphragm Alum. Santoprene Poly Teflon Kynar Teflon

Wt. RETAIL 91 lbs. $ 1926.92 85 lbs. 4024.02 85 lbs. 8747.52

Wt. RETAIL 5.6 lbs. $ 720.92 5.6 lbs. 804.00 8.7 lbs. 858.94

(800) 228-9666

•

www.dultmeier.com

• DAVENPORT, IA

(800) 553-6975

E1195

Air Operated Diaphragm Pumps

166

SandPiper Air-Driven Diaphragm Pumps from Warren Rupp. “No-Stall” design for continuous operation. Ideal for abrasives, caustics, corrosives and viscous chemical transfer. Pumps can run dry without damage. Air drive means no motors or engines are required. ISO Certified. Inlet supply pressure is 20 to 100 PSI on plastic pumps and 20 to 125 PSI on metal pumps. Maximum discharge pressure is 100 PSI. Maximum viscosity is 10,000 SSU or 2200 CPS. Maximum temperatures to 150° F. Pumps are available in a variety of sizes and construction to meet your needs. Other pump configurations and sizes are available in addition to those shown.

Air-Driven Diaphragm Pumps

PLASTIC BODIES

Part No. SO TS3PP SO TT3PP SO TT3K SO 5PPB SO 5PPS SO 5PPT SO 5PPK SO 7B1P1 SO 7B1P2 SO 1FB2P3 SO 1FB2P1 SO 1FB2P2 SO 1FB2PK SO S15B33 SO S15B31 SO S15B3P2 SO S20B3 SO S20B1 SO S20B2

Ports 1/4” 1/4” 1/4” 1/2” 1/2” 1/2” 1/2” 3/4” 3/4” 1” 1” 1” 1” 1-1/2” 1-1/2” 1-1/2” 2” 2” 2”

Body Polypropylene Polypropylene Kynar Polypropylene Polypropylene Polypropylene Kynar Polypropylene Polypropylene Polypropylene Polypropylene Polypropylene Kynar Polypropylene Polypropylene Polypropylene Polypropylene Polypropylene Polypropylene

Diaphragm Santoprene Teflon Teflon Buna Santoprene Teflon Teflon Santoprene Teflon Buna Santoprene Teflon Teflon Buna Santoprene Teflon Buna Santoprene Teflon

Max. Flow 4 GPM 4 GPM 4 GPM 14 GPM 14 GPM 14 GPM 14 GPM 23 GPM 23 GPM 45 GPM 45 GPM 45 GPM 45 GPM 100 GPM 100 GPM 100 GPM 150 GPM 150 GPM 150 GPM

Wt. RETAIL 4 lbs. $ 359.12 4 lbs. 469.00 4 lbs. 552.08 16 lbs. 712.88 16 lbs. 688.76 16 lbs. 888.42 16 lbs. 2282.02 17 lbs. 967.48 17 lbs. 1242.18 53 lbs. 1894.76 53 lbs. 1691.08 53 lbs. 2113.18 53 lbs. 3705.10 105 lbs. 4013.30 105 lbs. 3729.22 105 lbs. 4672.58 117 lbs. 5008.92 117 lbs. 5010.26 117 lbs. 6398.50

Diaphragm Buna Santoprene Teflon Santoprene Teflon Buna Santoprene Teflon Santoprene Teflon Buna Santoprene Teflon Santoprene Teflon Buna Santoprene Teflon Santoprene Teflon

Max. Flow Wt. RETAIL 15 GPM 15 lbs. $ 994.28 15 GPM 15 lbs. 994.28 15 GPM 15 lbs. 1662.94 15 GPM 21 lbs. 2728.24 15 GPM 21 lbs. 2815.34 45 GPM 28 lbs. 1224.76 45 GPM 28 lbs. 1224.76 45 GPM 28 lbs. 1595.94 45 GPM 43 lbs. 2903.78 45 GPM 43 lbs. 2846.16 106 GPM 53 lbs. 1590.58 106 GPM 53 lbs. 1590.58 106 GPM 53 lbs. 2332.94 106 GPM 95 lbs. 4649.80 106 GPM 95 lbs. 5690.98 150 GPM 77 lbs. 2324.90 150 GPM 77 lbs. 2326.24 150 GPM 77 lbs. 3035.10 150 GPM 120 lbs. 7427.62 150 GPM 120 lbs. 8050.72

Removable Air Valves

METAL BODIES

Polypropylene or Kynar Housings

Part No. SO S05BAB SO S05BAS SO S05BAT SO SS5BS1 SO SS5BS2 SO S1FBAB SO S1FBAS SO S1FBAT SO SBSS1W SO SBSS2T SO S15B1AB SO S15B1A1 SO S15B1A2 SO S15B1S1 SO S15B1S2 SO S20B1AB SO S20B1A1 SO S20B1A2 SO S20B1S1 SO S20B1S2

Ports 1/2” 1/2” 1/2” 1/2” 1/2” 1” 1” 1” 1” 1” 1-1/2” 1-1/2” 1-1/2” 1-1/2” 1-1/2” 2” 2” 2” 2” 2”

Body Aluminum Aluminum Aluminum Stainless Stainless Aluminum Aluminum Aluminum Stainless Stainless Aluminum Aluminum Aluminum Stainless Stainless Aluminum Aluminum Aluminum Stainless Stainless

Metal Housing

Air Operated Diaphragm Pumps Air-Driven Diaphragm Pumps from Versa-Matic. Exclusive Air Valve System. Anti-stalling, non-icing and lubrication-free. Designed to handle a wide range of products from water to 90% solids easily and efficiently. Available from 3/8” to 3” sizes. Bodies are polypropylene, aluminum, stainless or Kynar. A wide range of diaphragms and pump bodies will handle temperatures between 175° F. and 225° F. depending on construction. Pumps are rated from 100 to 120 PSI depending D on model. Ports are FPT or ANSI flange compatible, flanges are not included.

E4AA2 Aluminum Flanged

DULTMEIER SALES • OMAHA, NE

(800) 228-9666

Part No. Ports VA E8PP6X 3/8” FPT VA E8PP5T 3/8” FPT VA E8KP5B 3/8” FPT VA E5PP2R 1/2” FPT VA E5PP6X 1/2” FPT VA E5PP5T 1/2” FPT VA E5KP5T 1/2” FPT VA E1PP2R 1” Flange VA E1PP6X 1” Flange VA E1PP5T 1” Flange VA E1KP5T 1” Flange VA E4PA2 1-1/2” Flange VA E4PA6 1-1/2” Flange VA E4PA5 1-1/2” Flange VA E2PA2 2” Flange VA E2PA5 2” Flange

METAL PUMPS

Part No. Ports VA E5AA2 1/2” FPT VA E5AA6 1/2” FPT VA E5AA5 1/2” FPT VA E5SP6 1/2” FPT VA E5SP5 1/2” FPT VA E1AA2 1” FPT VA E1AA6 1” FPT VA E1AA5 1” FPT VA E1SP6 1” FPT VA E1SP5 1” FPT VA E4AA2 1-1/2” Flange VA E4AA6 1-1/2” Flange VA E4AA5 1-1/2” Flange VA E4SA6 1-1/2” Flange VA E4SA5 1-1/2” Flange VA E2AA2R 2” Flange VA E2AA6X 2” Flange VA E2AA5T 2” Flange VA E2SA6D 2” Flange VA E2SA5T 2” Flange

E8PP6X Polypropylene

IND

PLASTIC PUMPS

•

www.dultmeier.com

Body Polypropylene Polypropylene Kynar Polypropylene Polypropylene Polypropylene Kynar Polypropylene Polypropylene Polypropylene Kynar Polypropylene Polypropylene Polypropylene Polypropylene Polypropylene

Diaphragm Santoprene Teflon Teflon Buna Santoprene Teflon Teflon Buna Santoprene Teflon Teflon Buna Santoprene Teflon Buna Teflon

Max. Flow 6.8 GPM 5.5 GPM 5.5 GPM 14 GPM 14 GPM 11 GPM 11 GPM 35 GPM 35 GPM 28 GPM 28 GPM 72 GPM 72 GPM 57 GPM 140 GPM 112 GPM

Body Aluminum Aluminum Aluminum Stainless Stainless Aluminum Aluminum Aluminum Stainless Stainless Aluminum Aluminum Aluminum Stainless Stainless Aluminum Aluminum Aluminum Stainless Stainless

Diaphragm Buna Santoprene Teflon Santoprene Teflon Buna Santoprene Teflon Santoprene Teflon Buna Santoprene Teflon Buna Teflon Buna Santoprene Teflon Santoprene Teflon

Max. Flow Wt. RETAIL 14 GPM 15 lbs. $ 716.90 14 GPM 15 lbs. 1147.04 11 GPM 15 lbs. 1303.82 14 GPM 18 lbs. 2509.82 11 GPM 18 lbs. 2552.70 35 GPM 31 lbs. 799.98 35 GPM 31 lbs. 854.92 28 GPM 31 lbs. 1041.18 35 GPM 42 lbs. 1704.48 28 GPM 42 lbs. 1943.00 70 GPM 41 lbs. 1282.38 70 GPM 41 lbs. 1242.18 56 GPM 41 lbs. 2386.54 70 GPM 57 lbs. 5421.64 56 GPM 57 lbs. 3855.18 160 GPM 74 lbs. 2338.30 160 GPM 74 lbs. 1622.74 128 GPM 74 lbs. 2267.28 160 GPM 120 lbs. 6966.66 128 GPM 120 lbs. 8140.50

• DAVENPORT, IA

(800) 553-6975

Wt. RETAIL 3 lbs. $ 380.56 3 lbs. 444.88 4.5 lbs. 770.50 10 lbs. 550.74 10 lbs. 545.38 10 lbs. 663.30 10 lbs. 1183.22 24 lbs. 1449.88 24 lbs. 962.12 24 lbs. 1199.30 25 lbs. 3181.16 32 lbs. 3358.04 32 lbs. 2255.22 32 lbs. 2704.12 72 lbs. 3479.98 72 lbs. 5940.22

E0261

Air Operated Diaphragm Pumps

167

FLOJET Air Driven Diaphragm Pumps Air Operated Pumps Ideal for tire cleaners, bug cleaners, foam brush solutions, presoak chemicals, acid products and many more. D Two-chamber, dual diaphragm design. Powered by compressed air, CO2 gas or nitrogen. Temperature range is +34° F. to +120° F. Size is 7" x 6" x 4". Inlet and outlet fittings are 3/8" SS hose barbs. Air inlet fitting is 1/4" nylon hose barb. Suction lift (wet) is 25 in/hg. Pumping distance will vary with viscosity. Maximum flow is 2.20 GPM @ 20 PSI discharge & 60 PSI air inlet. Polypropylene body, 316SS internals and Viton® or EPDM diaphragms are standard for added chemical compatibility. Part No. Diaphragms *Flow @ 30 PSI Fluid Ports Wt. SU 166-20036 Viton® 1.75 gpm 3/8" 2 lbs. SU 166-20056 EPDM 1.75 gpm 3/8" 2 lbs. SU 94-175-06 EPDM Diaphragm & Valve Kit.................................... SU 94-175-05 Viton® Diaphragm & Valve Kit................................... SU 94-175-07 Santoprene Diaphragm & Valve Kit ......................... * Based on 60 psi inlet pressure.

RETAIL $ 184.92 142.04 21.98 85.09 19.83

Air Drive design allows for easy hook-up. Self-priming style with automatic shut-off. Maximum flow is 2.5 GPM. Maximum inlet temperature is 120° F. Maximum pressure is 80 PSI.

Standard Features Include: Infinitely variable capacity from zero to maximum flow. • Automatic demand operates pump only when discharge valve or wand is open, stops instantly when valve is closed. • Pump can run dry without damage. • Liquid being pumped does not come in contact with any metal parts. • No electrical connections. • No pressure relief valve or bypass plumbing is required. • Acetal/Celcon body • Air Ports are 1/4” Barb. Fluid ports 3/8” hose barb. Part No. Diaphragm/Valves Air Ports Fluid Ports RETAIL FJ 5100-040 Santoprene 1/4" Barb 3/8" Barb $ 103.92 FJ 5100-020 Viton® 1/4" Barb 3/8" Barb 131.79 FJ 5100-050 * Geolast 1/4" Barb 3/8" Barb 136.68 FJ 20467-007 Santoprene Valve Kit ............................................. 27.07 FJ 20467-006 Viton® Valve Kit...................................................... 27.34 FJ 20466-007 Santoprene Diaphragm Kit..................................... 21.44 FJ 20466-006 Viton® Diaphragm Kit............................................. 47.91 GN 6ZC63 Air Filter - 1/4" M x 1/4" F (Pkg. of 2)..................... 45.16 * Geolast is best for petroleum base products. NOTE: Viton® & Santoprene Kits are not interchangeable.

FLOJET Air Pumps Air Diaphragm Pumps

G5700 Single & G257 Dual Diaphragm Air Driven Transfer Pumps. A compact pump with high flow and pressure capabilities. Applications include Chemical Transfer and Automotive Cleaning. Bag-in-the-Box Chemicals, Parts Washers. Capable of passing up to 1/8" solids.

• Ideal for Chemical Transfer & Pumping D

• High Efficiency Pneumatic Spool Valves

G5700

• Handles High Viscosity Liquids • Can Run Dry Without Damage Double-Diaphragm Air Pumps from Shurflo. No stall, high efficiency pneumatic spool valves for long, trouble-free operation. Ideal for chemical transfer and pumping applications. Rated to 10 GPM open flow and pressure from 40 to 100 PSI. Temperatures to 120° F. Can run dry without damage. Can handle high viscosity liquids. 1/4” air barb with 1/2” & 3/4” liquid barbs are included for ease of plumbing. Part No.

Elastomers

SU 477-40001 SU 477-40001V

Santoprene Viton®

Max. PSI

100 100

Wt.

Flow rates to 10 GPM and pressures to 100 PSI. • Temperatures to 120° F • Selfpriming to 15' • Patented shuttle valve eliminates stalling • Constructed of corrosion resistant materials to handle a wide variety of chemicals. Construction: Body is Polypropylene • Diaphragms and check valves are Santoprene®, Viton® or Kalrez • Springs are 316SS. Specifications: Gas inlet and outlet are 1/4" • Product inlet and outlet are 1/2" barbs. G257

MODEL G257 Air Pump

RETAIL

2.5 lbs. $ 159.46 2.5 lbs. 187.60

Flow Rate GPM (L/min) *Indicates Air Inlet Pressure

Visit Our Online Store

Part No.

FJ G5700 FJ G5700V FJ G5700C FJ G257501A FJ G257301A FJ 20730-000A FJ 20740-050A FJ 21000-209 FJ 20740-020A FJ 21000-661A FJ 20740-022A

Anytime. Anywhere. dultmeier.com

DULTMEIER SALES • OMAHA, NE

(800) 228-9666

Max Flow *Max PSI RETAIL

* Maximum air consumption is 2.8 cfm @ 120 psi. † Higher chemical resistance than Viton® or Santoprene.

Viton® is a registered trademark of DuPont Performance Elastomers

IND

Diaphragm

Santoprene** 7 GPM 100 $ 133.80 Viton® 7 GPM 100 192.96 † Kalrez 7 GPM 100 250.58 Santoprene** 10 GPM 100 278.05 Viton® 10 GPM 100 357.11 Diaphragm Kit, Santoprene**............ 29.21 Check Valve Kit, Santoprene**.......... 22.51 Diaphragm Kit, Viton®....................... 53.27 Check Valve Kit, Viton®..................... 69.68 Diaphragm Kit, Kalrez........................ 162.14 Check Valve Kit, Kalrez...................... 82.41

** Santoprene is a registered trademark of Monsanto Co. •

www.dultmeier.com

• DAVENPORT, IA

(800) 553-6975

E0264

Gear & Progressive Cavity Pumps

168

Bronze Gear Pumps

Hydraulic Drive Bronze Gear Pumps

PEDESTAL STYLE

Oberdorfer Bronze Gear Pumps will handle oil, diesel, gasoline, saltwater, brine, mag chloride, calcium chloride and other compatible liquids (with solids less than 10 microns in D size). Self-priming to 18’. Rated to 150 PSI. Standard with buna lip seals-rated to 225° F. (rated to 400° F. with optional Viton® mechanical seal; teflon seals also available). Cast bronze housing, machined bronze helical gears, 303 stainless shaft & carbon bearings (request bronze bearings for pumping water). Direct drive 1/4” through 1” models at 1725 RPM. 1 1/4” thru 2” models are standard with outboard bearings for direct or belt drive applications & Viton® lip seals. Also available with close coupled motors and in stainless steel construction. Use with explosion-proof motors for flammable liquids. Flow @ 100 PSI HP Req’d Shaft Part No. Description at 1725 RPM at 100 PSI Dia. RETAIL OD GPB1/4 1/4” Pump Less Relief Valve 3.0 GPM 0.43 HP 1/2” $ 314.90 OD GPB1/4R 1/4” Pump With Relief Valve 3.0 GPM 0.43 HP 1/2” 357.78 OD GPB1/2 1/2” Pump Less Relief Valve 9.4 GPM 1.75 HP 5/8” 458.28 OD GPB1/2R 1/2” Pump With Relief Valve 9.4 GPM 1.75 HP 5/8” 530.64 OD GPB3/4 3/4” Pump Less Relief Valve 18.0 GPM 2.4 HP 5/8” 660.62 OD GPB3/4R 3/4” Pump With Relief Valve 18.0 GPM 2.4 HP 5/8” 686.08 OD N9000 1" Pump Less Relief Valve * 21.3 GPM 2.7HP 5/8” 641.86 OD GPB1 1” Pump Less Relief Valve 21.3 GPM 2.7 HP 5/8” 633.82 OD GPB1R 1” Pump With Relief Valve 21.3 GPM 2.7 HP 5/8” 747.72 OD GPB1-1/4L 1 1/4” Pump Less Relief Valve **51.0 GPM 6.0 HP 1.0” 1634.80 OD GPB1-1/2 1 1/2” Pump Less Relief Valve **81.0 GPM 9.4 HP 1.0” 1743.34 OD GPB2 2” Pump Less Relief Valve **163 GPM 18.8 HP 1.0” 3404.94 * N9000 has packing gland for pumping waste oil with debris in it. (Packing will weep Oil)

1/2 HP Aluminum Pump 1 26 lbs. $ 1881.36 1/2 HP Bronze Pump 1 26 lbs. 2603.62 3/4 HP Aluminum Pump 1 26 lbs. 2153.38 3/4 HP Bronze Pump 1 43 lbs. 2168.12 Aluminum Pedestal Pump, 3/4"..... 7 lbs. 1175.18 Bronze Pedestal Pump, 3/4".......... 19 lbs. 1384.22

Phase

Wt.

Part No. HY 8304BHM5C HY 8304BVHM5C HY 8304BV

Bronze Gear Pumps Wt. RETAIL PUMP Without Relief Valve....................... 15 lbs. $ 972.84 PUMP With Relief Valve............................ 16 lbs. 1654.90 PUMP with Relief Valve - Less Hyd. Motor 7 lbs. 565.48

ChemSteel® Gear Pumps are an excellent choice for transferring acids, alkalines and other aggressive chemicals which are not compatible with bronze or cast iron gear pumps.

Progressive Cavity (helical rotor) Pumps are an excellent choice for handling dirty liquids with high solids content such as waste oil and sandy water. They will also handle oil, diesel, gasoline as well as viscous liquids. Self-priming to 18’. Available with cast aluminum or bronze alloy bodies with buna stators & stainless rotors with D hard chrome plate for improved wear. Carbon ceramic mechanical seals. Standard with close coupled, single phase, open drip-proof motors. 1/2 HP models rated to 70 PSI; 3/4 HP models to 100 PSI. 8 GPM at 40 PSI & 6 GPM at 70 PSI. 3/4” FPT ports. Require external relief valve (sold separately). Use with explosionproof motors for flammable liquids. Description

Hydraulic Motor Features: State-of-the-art internal gear motor • Bypass adjustment • 1/2” NPT ports with anti-reverse check • Hydraulic oil flow rate is 3.0 to 4.5 GPM • 100 PSI pressure rating. Note: 850 PSI maximum hydraulic inlet pressure.

For Industrial Acids & Chemicals

Oberdorfer Progressive Cavity Pumps

OD 101-J25 OD 101B-J25 OD 101-M07 OD 101B-M07 OD 121 OD 121B

ChemSteel® gear pumps can also be fitted to handle hazardous, toxic, highly corrosive or flammable chemicals. These pumps can be fitted to pump sulfuric acid, hydrochloric acid, sodium hydroxide, alcohols, solvents and other aggressive chemicals. Bodies available in 316 stainless, Alloy C or Ryton. Gears available in 316 stainless, Alloy C, Ryton, W88 (non-galling stainless blend), PEEK and Teflon. Shafts are 316 stainless or Alloy C. Slotted bearings to lubricate shaft and gear surfaces are available in Carbon, Teflon and Rulon. Single or double mechanical seals are available in Teflon and Kalrez for excellent chemical resistance (seal flush ports also available). Seal-less magnetic drive models also available. Helical gears reduce noise by up to 10 db compared to other gear pumps. Self-priming to 15’ lift. Pumps can run up to 1750 RPM. Flow rates from 1.5 to 30 GPM. Pressures to 150 PSI differential and 300 PSI maximum. Temperatures from -40° F. to 400° F. Bidirectional operation. Available as pedestal pumps, close-coupled to ODP, TEFC or Explosion-Proof motors and in Magnetic-Drive seal-less configurations. External relief valves also available. Metallic

Mag-Drive

RETAIL

Call with Chemical Description, Specific Gravity, Viscosity, Temperature and Flow Rate Requirements for Proper Pump

Cast Iron Gear Pumps

Selection & Pricing.

An excellent choice for transferring non-corrosive liquids at lower volumes including viscous liquids such as hydraulic oils, lubricants, petroleum oils, vegetable and mineral oils, solvents and more. Flow rates to 35 GPM. Pressures to 500 PSI. Helical gears for quieter operation. Variety of mechanical and packing seals and bearings. Self-priming to 20’.

Call with Chemical Description, Temperature and Flow Rate Requirements for Proper Pump Selection and Pricing. IND

DULTMEIER SALES • OMAHA, NE

Oberdorfer ChemSteel® Gear Pumps

** Viton® Lip Seal

Part No.

This positive-displacement pump is ideal for deicing. Combining the pump and motor as a single unit eliminates the need for shaft alignment with coupling. The unit’s compact size allows it to be used in a wide variety of locations. Pump is cast bronze. Up to 10.4 GPM and 100 PSI.

(800) 228-9666

Non-Metallic Ryton

Tandem Pumps • Double the output flow for a single fluid. • Or with isolation, handle different fluids in direct ratio to each other.

Viton® is a registered trademark of DuPont Performance Elastomers

•

www.dultmeier.com

• DAVENPORT, IA

(800) 553-6975

E0729

Gear Pump Units Series A Gear Pumps

Viscous Products & Liquid Feed Pump Units

For Pressures to 300 PSI

Use these Pump Units for Oils, Liquid Feeds and Other Viscous Products (Non-Abrasive) up to 100,000 SSU. F12C Pump Unit is designed to handle viscous products and liquid feeds at about 10 GPM using a Roper 2835 Rotary Gear Pump and 1-1/2 HP TEFC motor. F12C D (Meters are not suitable for use D with cer tain liquid feed products, or other liquids which contain gritty or abrasive materials in suspension). The unit is supplied assembled as shown with 110/220 volt TEFC motor, 1" x 12' hose assembly and dispensing nozzle. 2835 PUMP has a 1/2" keyed shaft and 1-1/2" FPT ports.

1800 RPM

PSI

SSU

1200 RPM

• Can Be Run at Standard Motor Speeds (for liquids with low or medium viscosities to 5,000 SSU). 10,000 SSU maximum viscosity.

• CI Housings, Hardened Steel Gears and Drive Shafts, Bronze Bearings and Steel Idler Shafts.

100 1000 10,000 100,000 100 1000 10,000 100,000

25 GPM 11 11.4 11.5 11.5 7.2 7.5 7.6 7.6

HP .28 .40 .63 1.18 .15 .22 .32 .57 75 GPM 10 11.2 11.3 11.4 6.1 7.3 7.4 7.5 HP .60 .72 .95 1.5 .39 .46 .56 .81

• Standard with Viton® Mechanical Seals. 2835

• Also, Available with TEFC or Explosion-Proof Motors (Long-Coupled - Call with Requirements).

Roper's 2835 rotary pump is designed for use in the pumping of viscous products and molasses base feed supplements. Capacities range up to 11 GPM at 1800 RPM. Teflon-Viton® lip seal is standard. Part No. COMPLETE UNITS (As Shown) DU F12C With 115/230 -Volt 1-Phase Motor........... DU F12C3 With 230/460 -Volt 3-Phase Motor...........

General Purpose Gear Pumps for a wide variety of applications including pressure lubrication, hydraulic service, fuel supply and more.

• Models Shown Below Include Adjustable Relief Valves (126 - 300 PSI) and base “feet”.

2835 PERFORMANCE

169

Wt. RETAIL 82 lbs. $ 2245.84 82 lbs. 2259.24

Flowrate Maximum * HP Part No. @ Max. RPM Pressure Req’d RR 18AM01 3.2 GPM @ 3600 RPM 300 PSI 1.5 HP RR 18AM02 6.6 GPM @ 3600 RPM 300 PSI 3 HP RR 2AM03 10.0 GPM @ 3600 RPM 300 PSI 3 HP RR 2AM03B †10.0 GPM @ 3600 RPM 300 PSI 3 HP

Ports Wt. RETAIL 3/8” 6 lbs. $ 883.06 3/8” 8 lbs. 880.38 3/4” 11 lbs. 956.76 3/4” 8 lbs. 928.62

* Maximum HP Shown is at 300 PSI and 3600 RPM; Running with 1800 RPM Motors will Reduce Flowrate by 1/2 & HP Required by 1/2. † “B” Denotes Buna Mechamical Seal.

PUMP & MOTOR UNIT ONLY (LESS Hose, Nozzle & Meter) DU F10 With 115/230-Volt 1-Phase Motor........... 72 lbs. 1842.50 DU F10-3 With 230/460-Volt 3-Phase Motor........... 68 lbs. 1843.84 DU F10GHA With 5.5 HP Honda Engine...................... - 1461.94

Series A Gear Pumps

Visit Us On the Internet!

For Pressures to 100 PSI These Series A Gear Pumps include the same features as above but with 0-100 PSI relief valves, ductile iron gears and Buna mechanical seals (Viton® seals available). Maximum 1800 RPM. Weight is 35 lbs. Flowrate Maximum * HP Part No. @ Max. RPM Pressure Req’d RR 2AM08B 15 GPM @ 1800 RPM 100 PSI 3 HP RR 2AM12B 22 GPM @ 1800 RPM 100 PSI 5 HP Note: Maximum HP Shown is at 100PSI and 1800 RPM.

Ports RETAIL 1-1/4” $ 1266.30 1-1/4” 1291.76

Many Other Series A Models Are Available Call with Your Flow Rate & Pressure Requirements.

dultmeier.com View this catalog & Order on-line! Viton® is a registered trademark of DuPont Performance Elastomers

IND

DULTMEIER SALES • OMAHA, NE

(800) 228-9666

•

www.dultmeier.com

• DAVENPORT, IA

(800) 553-6975

E0241

Gear Pumps

170 No. 2835 for

3800 Series Gear Pumps

Viscous Liquids

• Suitable for Waste Oil, Spent Fuels, Hot Oils, Light & Heavy Crude Oils, Condensates & Kerosene Mixtures.

ROPER’S 2835 Rotary Pump is designed for use in pumping of viscous liquids. Capacities to 11 GPM at 1750 RPM. Can be direct connected to standard electric motor (1750 or 1200 RPM). Self priming to approximately 8 ft. with foot valve for initial prime. Note: Do not run dry.

• Pressures to 125 PSI

• Hardened Gears & External Sealed Ball Bearings

In the high position the 1/2" drive shaft will align with a NEMA 56, 143T or 145T motor shaft for direct drive. In the low position it will align with a NEMA 48 frame motor. Use 1-1/2 HP motor (clockwise rotation facing shaft is not reversible). External helical gear design, coupled with 1-1/2" ports, allow highly viscous liquids (up to 100,000 SSU) to be pumped at speeds up to 1750 RPM. The bearings are lubricated by the liquid being pumped. With only two moving parts, Roper’s long-lived helical gears, the pump runs quietly.

• Flow Rates to 540 GPM & Temperatures to 250° F.

• Triple Shaft Seals These heavy-duty Roper 3800 Series Gear Pumps include hardened iron gears. In addition, the external sealed ball bearings are protected from the liquid by the triple shaft seals (grease purged), which extends the pump life significantly when pumping dirty liquids. These 3800 series pumps also include steel shafts, cast iron housings and overpressure relief type grease fittings. Suitable for waste oil and spent waste fluids, hot oils and oil field applications including light and heavy crude oils, condensates and kerosene mixtures. Four sizes with pressures to 125 PSI, flow rates to 540 GPM and temperatures to 220° F. with standard buna lip seals (Viton® available, 250° F.). All ports are bolt on, FPT flanges for easy pipe removal in the field. Built-in relief valve available on 3848FRV model.

.0063 Gallons Per Revolution

Housing Gears

Bearings Shafts

Cast Iron Hardened Iron Steel

Hardened Steel

1-1/2" FPT ports • 1/2" Keyed Drive • Lip Seal: Teflon-Viton® or Packing: Graphite or Teflon

Part No.

ROPER VISCOUS LIQUID PUMP

RR 2835L RR 2835P RR G17-71 RR N43-32 RR N43-109

Gear Pump, with Lip Seal................ 11 lbs. $ 919.24 Gear Pump, with Packing Gland...... 11 lbs. 1035.82 Replacement Lip Seal...................... - 53.60 Replacement Packing Seal (Graphite) - 11.73 Replacement Packing Seal (Teflon). - 42.21

Wt.

Flowrate Built-In Part No. Gear Pump Per 100 RPM Relief Valve RR 3832F 3” FPT 32 GPM No RR 3843F 3” FPT 43 GPM No RR 3848F 4” FPT 52 GPM No RR 3848FRV 4” FPT 52 GPM No RR 3858F 4” FPT 60 GPM No

RETAIL

Wt. RETAIL 80 lbs. $ 6851.42 80 lbs. 6965.32 90 lbs. 7080.56 90 lbs. 7588.42 90 lbs. 8424.58

3” Rubber Gear Pumps Roper 5600 Series

APPLICATIONS Oil Field Service • Brine & Raw Water • Sludges & Slurry • Waste Oils, Tallow, etc. • Sealant Coats • Molasses Feeds • Fertilizers • Paper Pulps • For Fixed or Mobile Transfer FEATURES:

2835 REPAIR PARTS LIST

• Reversible Rotation & Flow • Interchangeable Parts with Bowie's 3300 • Cast Iron Construction • External Greasing • Rubber Covered Gears • Non-Pulsating Flow • 100 PSI Maximum Pressure • 10,000 SSU Maximum Viscosity • Maximum Speed - 400 RPM • Pumps Supplied Without Relief Valve • 3” FPT Bolt On Ports

SEAL for 2835P Pump (Packing Type)

SEAL for 2835L Pump (Lip Type)

Roper 5600 Series

Part No.

Port Size

Capacity @ 50 PSI & 400 RPM Shaft

RR 5658 3" x 3”

NOTE: Parts are interchangeable with Bowies 2300 & 3300 Series.

• Available for 3600 & 3700 Series Pumps • Bolts to Existing Pumps

Bi-Directonal Relief Valve for:

3611, 17 & 22 Pumps............................ $ 722.26 3648 & 3748 Pumps.............................. 2339.64

RETAIL

N44-359 Repair Kit Includes: Drive Gear/Shaft Assembly Idler Gear/Shaft Assembly Bronze Bearings Packing Rings Case Gasket

Repair Kits & Parts

• Torture Tested - Life Exceeded 12,000 Fully Reversed Cycles

RR N7-901 RR N7-909

Wt.

1-3/8" 142 lbs. $ 1478.02

NOTE: Pumps supplied without relief valve.

Integral Bi-Directional Relief Valve

Part No.

209 GPM

Part No.

RR N44-359 RR P23-151 RR D11-615 RR G49-050150

RETAIL

Repair Kit for 5658 Pump................ $ 869.66 3" FPT Flange for 5658 Pump......... 98.49 3" Flange Gasket for 5658 Pump.... 4.72 Flange Screws for 5658 Pump........ 8.51

NOTE: You Need (2) Flanges, (2) Gaskets & (8) Flange Screws per Pump.

Viton® is a registered trademark of DuPont Performance Elastomers

IND

DULTMEIER SALES • OMAHA, NE

(800) 228-9666

•

www.dultmeier.com

• DAVENPORT, IA

(800) 553-6975

E0244

Gear Pumps & Pump Units Packed box seal, top & side ports, with relief valve.

BUILT-IN RELIEF VALVE

Gear Pumps FOR FIXED AND MOBILE TRANSFER

Available in Stainless Steel and Cast Iron

QUIET-RUNNING HELICAL GEARS • Heat treated cast-iron pumping gears are accurately machined for quiet, efficient operation and long life. • The pumping gears are keyed to their shafts with a sliding fit and are easily replaced, if it becomes necessary. • Accurate machining insures proper meshing, and reduces friction and vibration.

REVERSIBLE ROTATION

Discharge

3611HBRV

300RPM

400 RPM

171

LONG-LASTING WEARING SURFACES • Bearings are special wear-resistant, high-lead bronze. Iron and carbon bearings are available. • Four heavy duty sleeve bearings give positive support to pumping gears and insure long, efficient service. • Bearing grooves allow circulation of the liquid being pumped for lubrication and control of bearing temperature. • Outboard drive shaft bearing supports external radial loads and absorbs thrust loads. RUGGED HOUSING • All castings are made of cast iron • Precise manufacturing tolerances provide minimum clearances for maximum pumping efficiency. • Large, hardened steel dowel pins insure positive alignment between the faceplate, case, and back plate. PRECISION-GROUND SHAFTS • The steel shafts are induction hardened in the bearing and packing areas and are precision ground to exacting standards for maximum life. • Hardened stainless steel shafts are available.

500 RPM

600 RPM

700 RPM

PSI SSU 30 100 1000 10,000 30 100 1000 10,000 30 100 1000 10,000 30 100 1000 10,000 30 100 1000 10,000

3611 Inlet

Roper offers hi-drive and lo-drive units, with both made of the same basic assemblies. Should it be necessary to reverse the pump inlet & outlet, it can be done easily by disassembling the pump and reassembling it as desired.

Stock pump includes standard rotation & ports (“W”Orientation) as shown here. Gear Reduction Pumps are opposite.

3617

3622 3722

PORT Part No. SIZE RR 3611HB 2" FPT RR 3611HBRV 2" FPT RR 3617HBRV 2" FPT RR 3622HBFRV ** 3" FPT

25 GPM 31 32 33 33 42 43 44 53 54 55 64 65 66 75 75 77 HP .8 .8 1.1 1.6 1.2 1.2 1.7 1.6 1.6 2.3 2.1 2.1 2.9 2.5 2.5 3.5 50 GPM 29 31 33 33 40 42 44 51 53 55 62 64 65 73 75 77 HP 1.3 1.3 1.6 2.2 1.9 1.9 2.3 2.4 2.4 3.2 3.1 3.1 3.8 3.6 3.6 4.6 100 GPM 29 32 33 41 43 51 54 63 65 74 76 HP 2.2 2.5 3.1 3.1 3.6 4.1 4.7 4.9 5.7 5.7 6.8 125 GPM 27 32 33 39 43 50 54 62 65 72 76 HP 2.7 3.1 3.5 3.7 4.2 4.7 5.4 5.9 6.7 6.9 8.1 25 GPM 46 49 50 51 63 66 67 80 83 84 95 100 101 115 117 118 HP 1.1 1.1 1.4 2.2 1.4 1.4 2.2 2.1 2.1 3.1 2.6 2.6 4.2 3.5 3.5 5.6 50 GPM 42 47 50 51 59 64 67 76 81 84 93 98 101 111 115 118 HP 1.7 1.7 2.1 3.9 2.4 2.4 3.2 4.5 4.5 5.5 4.1 4.1 5.6 5.1 5.1 7.1 100 GPM 43 49 50 60 66 77 83 94 100 111 117 HP 3.2 3.6 4.4 4.3 5.1 5.6 6.6 7.1 8.5 8.4 10.5 125 GPM 41 48 50 58 65 75 82 92 99 109 116 HP 3.9 4.2 5.1 5.3 6.1 6.8 7.8 8.3 9.9 10.2 12.3 25 GPM 63 65 66 66 85 87 88 107 109 110 129 131 132 151 153 154 HP 1.5 1.5 1.8 2.6 2.3 2.3 3.1 2.9 2.9 3.9 3.7 3.7 4.9 4.5 4.5 6.3 50 GPM 61 63 65 66 83 85 87 105 107 109 127 129 131 149 151 153 HP 2.4 2.4 2.7 3.5 3.6 3.6 4.4 4.5 4.5 5.5 5.4 5.4 6.7 6.6 6.6 8.4 100 GPM 61 65 66 83 86 105 108 127 130 149 152 HP 4.2 4.6 5.4 6.1 6.9 7.6 8.5 9.2 10.4 11.1 12.9 125 GPM 60 64 66 82 86 104 108 126 130 148 152 HP 5.3 5.6 6.4 7.3 8.1 9.3 10.2 11.3 12.5 13.5 15.3

CAPACITY/100 SSU 50 PSI @ 700 RPM RELIEF VALVE 75 GPM Not Supplied 75 GPM Built-In 98 GPM Built-In 151 GPM Built-In

* MATERIALS WT. SEAL TYPE SHAFT BEARINGS LBS. RETAIL Packed Box 1" Steel Bronze 70 $ 1144.36 Packed Box 1" Steel Bronze 80 1331.96 Packed Box 1" Steel Bronze 90 1547.70 Packed Box 1" Steel Bronze 140 1843.84

Viton® is a registered trademark of DuPont Performance Elastomers

* Standard with packing glands; Viton™ Mechanical Seal Conversion Kit is RR N34-98. ** Has Bolt On Flanges.

ROPER Pump Units Roper Pumps are available as a complete base mounted unit in belt drive and gear reduction drive. Base plates, shaft guards and belt guards are heavy duty steel. Motors are totally enclosed, 1 or 3 Phase and can be equipped with variable speed drives. Custom built models with other options also available. NOTE: Standard units are mounted on stationary base. Units shown INTENDED for oils to 30 wt. at 70° F. Contact our Engineering Department for extra HP for more viscous products. ELECTRIC MOTOR BELT DRIVE UNITS Part No. MOTOR PUMP NO. GPM @ RPM DU RPU31 3 HP 1-Ph 3611HBRV 48 @ 460 DU RPU32 3 HP 1-Ph 3611HB 48 @ 460 DU RPU33 3 HP 3-Ph 3611HBRV 48 @ 460 DU RPU34 3 HP 3-Ph 3611HB 48 @ 460 DU RPU315 ** 5 HP 1-Ph 3611HBRV 48 @ 460 DU RPU335 ** 5 HP 3 Ph 3611HBRV 48 @ 460 DU RPU51 5 HP 1-Ph 3617HBRV 78 @ 460 DU RPU53 5 HP 3-Ph 3617HBRV 78 @ 460 DU RPU71 7.5 HP 1-Ph 3617HBRV 78 @ 460 DU RPU73 7.5 HP 3-Ph 3617HBRV 78 @ 460 DU RPU103 10 HP 3-Ph 3622HBFRV 120 @ 540 ** These 5 HP Units Suitable for 30 Wt. Oils at 30° F.

Electric Belt Drive Models (shown with optional 3” bolt-on flanges) D

Wt. RETAIL 312 lbs. $ 3173.12 290 lbs. 3012.32 270 lbs. 3027.06 260 lbs. 2737.62 325 lbs. 3559.04 325 lbs. 3194.56 325 lbs. 3647.48 315 lbs. 3422.36 430 lbs. 4325.52 430 lbs. 3735.92 420 lbs. 4145.96

Gas Engine Driven Models D

GAS ENGINE BELT DRIVEN UNITS Part No. MOTOR PUMP NO. GPM @ RPM Wt. RETAIL DU RPU5G-H 5.5 HP Honda 3611HBRV 42 @ 400 245 lbs. $ 2984.18 DU RPU8GH 8 HP Honda 3617HBRV 90 @ 530 325 lbs. 3706.44 DU RPU13GH 13 HP Honda 3622HBFRV 116 @ 530 420 lbs. 4317.48 GEAR REDUCTION UNITS with ELECTRIC DRIVE Part No. MOTOR PUMP NO. GPM @ RPM Wt. RETAIL DU RPU73GHD 7.5 HP 3-Ph 3617GHBFRV 92 @ 540 - $ 5053.14 DU RPU103GHD 10 HP 3-Ph 3622GHBFRV 120 @ 540 570 lbs. 5408.24

Gear Reduction Models with Electric Motor Drive

Electric Drive Units are Available In Direct Drive for Use with Motor Speed Controls — Call for Pricing! IND

DULTMEIER SALES • OMAHA, NE

(800) 228-9666

•

www.dultmeier.com

• DAVENPORT, IA

(800) 553-6975

E0242

Gear Pump Repair Parts

172

Roper Repair Parts WE MAINTAIN A LARGE INVENTORY OF ROPER PUMP REPAIR PARTS-SEE MANY PUMP PARTS & SCHEMATICS ON dultmeier.com

PUMP MODELS 3600 - 3700 HB, F, RV Type 3

New Style After 1980

ORDER BY PART NUMBER BELOW NO. ON DESCRIPTION QTY 11 17 22 1 C WASH, HD CAP SCREW 4 G49-24 G49-24 G49-24 2 C HEX HD CAP SCREW 16 G49-037100 G49-037100 G49-037100 3 C RETAINING RING 1 G41-10 G41-10 G41-10 4 C BALL BEARING 1 G40-41 G40-41 G40-41 5 C LUBE FITTING 1 G63-1 G63-1 G63-1 6 C BACKPLATE ASSEMBLY 1 N2-403 N2-403 N2-403 BEARING, LONG, BRONZE 1 G5-257 G5-257 G5-257 BEARING, SHRT, BRONZE 1 G5-258 G5-258 G5-258 7 C GASKET, CASE 2 D11-338 D11-338 D11-338 8 C DOWEL PIN, HOLLOW 4 D48-34 D48-34 D48-34 9 C LOCKNUT 2 D441-755 D441-755 D441-755 10 PB CLIP, PKG GLAND 2 D42-1 D42-1 D42-1 11 PB GLAND, PKG 1 P10-178 P10-178 P10-178 12 PB SQUARE HEAD BOLT 2 G67-043275 G67-043275 G67-043275 13 PB CLIP, SPRING 1 D42-2 D42-2 D42-2 14 PB PACKAGE SET 1 N43-1 N43-1 N43-1 15 PB WASHER, PACKAGE 1 G8-246 G8-246 G8-246 16 MS RETAINER, SEAL 1 D23-252 D23-252 D23-252 17 MS SQUARE HEAD BOLT 2 G67-043125 G67-043125 G67-043125 18 MS MECH. SEAL, COMPLETE 1 G4-101 G4-101 G4-101 19 MS RETAINING RING 1 G41-76 G41-76 G41-76 20 C DRIVE SCREW 2 G62-9 G62-9 G62-9 21 C NAMEPLATE 1 G12-34 G12-34 G12-34 22 C PIPE PLUG (4)G56-12 (4)G56-12 (2)G56-12 23 C CASE 1 P1-178 P1-177 NA 24 C HEX HD CAP SCREW 8 G49-050150 G49-050125 G49-062225 25 C FLANGE, STRAIGHT 2 P23-30 P23-12 P23-10 26 C GASKET, FLANGE 2 D11-333 D11-332 D11-90 27 C NUT 8 NA NA G44-062 28 C CASE 1 P1-401 P1-402 P1-175 29 C SHAFT, IDLER 1 D1-1098 D1-1100 D1-1077 30 C KEY 3 D30-9 D30-9 D30-9 31 C SHAFT, DRIVE 1 D1-2072 D1-2073 D1-1998 32 C GEAR, LH 1 P6-276 P6-274 P6-278 33 C GEAR, RH 1 P6-275 P6-273 P6-277 34 C FACEPLATE, ASSEMBLY, PL 1 N3-177 N3-177 N3-177 BRG, BRZ 2 G5-257 G5-257 G5-257 35 C FACEPLATE ASSEMBLY, RV 1 N3-200 N3-200 N3-200 BEARING, BRONZE 2 G5-257 G5-257 G5-257 36 C POPPET 1 D16-16 D16-16 D16-16 37 C ADAPTER, POPPET 1 G8-281 G8-281 G8-281 38 C SPRING, STD 1 G10-355 G10-355 G10-355 SPRING, HIGH PRESSURE 1 G10-375 G10-375 G10-375 39 C GUIDE, SPRING 1 D8-348 D8-348 D8-348 40 C GASKET, CAP 1 D828-41 D828-41 D828-41 41 C PLUG CAP 1 P17-110 P17-110 P17-110 42 C NUT, LOCK, AND SEAL 1 G43-18 G43-18 G43-18 43 C SCREW, ADJUSTING 1 G62-44 G62-44 G62-44 44 C HEX HEAD CAP SCREW 8 G49-050150 G49-050175 G49-062225 45 C FLANGE, STRAIGHT 2 P23-30 P23-35 P23-19 46 C GASKET, FLANGE 2 D11-333 D11-332 D11-90 47 C CASE, THROUGH-PORTS 1 P1-170 P1-181 P1-171 N7-250 Complete RV faceplate assembly with standard spring (35 through 43 included) N7-406 Completed RV faceplate assembly with high pressure spring (35 through 43 included)

Roper Pump Repair Kits Featuring “Genuine” Roper Parts!

STANDARD FITTED KITS INCLUDE THE FOLLOWING: 1. Retaining ring 2. Ball Bearing 3. Bronze Bushings (1 long, 1 short) 4. Case Gaskets 5. Gland Clip 6. Spring Clip 7. PTFE/Graphite Packing 8. Flange Gaskets 9. Idler Shaft

10. Keys 11. Drive Shaft 12. Left Hand Gear 13. Right Hand Gear 14. Bronze Bushings (2 long) 15. Relief Valve Spring 16. Relief Valve Gasket 17. Relief Valve Nut 18. Relief Valve Adjusting Screw

DULTMEIER SALES • OMAHA, NE

OPTIONS AVAILABLE • • • • •

Carbon Bushings Iron Bushings PTFE Bushings Hi Pressure Relief Valve Sprint Stainless Shafts

Complete Rebuild Kits for Roper 3611, 3617 or 3622 Gear Pumps. Kits include all major parts required to rebuild your pump. Only “Genuine” Roper parts are used. Standard with bronze bushings and steel shafts. Part No. RETAIL

RR N44-188 Repair Kit for 3611 Pump $ 838.84 RR N44-172 Repair Kit for 3617 Pump 868.32 RR N44-133 Repair Kit for 3622 Pump 901.82 Note: Carbon, Iron or PTFE bushings or Stainless Shafts are available at added cost.

(800) 228-9666

•

www.dultmeier.com

• DAVENPORT, IA

(800) 553-6975

E0243

Squeeze Pumps & Accessories

173

The John Blue ground driven metering pump accurately maintains the same rate of application per acre at all ground speeds. Whether you speed up or slow down due to terrain or soil conditions, the application rate will not vary. A true metering pump will also maintain a constant rate at any fluid level in the tank. The John Blue squeeze pump has met these demands and surpassed them. A Large Selection of Squeeze Pumps to Meet Your Fertilizer Needs:

8B1

• Application rate will not vary even if you speed up or slow down. • Maintains a constant rate at any fluid level in the tank. • 7 Standard models with nylon bearings. • All models are available with complete mount and drive. • Some models available with universal mount that is adaptable to most planters. • 5 PVC manifold models for use with low ph acid fertilizers.

D D

Features: • Heavy cast iron, rigid frame will not flex due to uneven ground. • Grease fittings on rollers allow dirt and fertilizer contamination to be flushed out. • Round hoses and spring loaded back plate. • Hoses have memory shape for accurate rates. • Positive shut off when pump stops. • Your choice of individual sprockets or complete cluster sets. • Wide range of available sprockets allows for 87 different application rates.

L6C

D D

Models Available for Oval-Shaped Squeeze Tube Pump with Built-in Backing Plate Discharge Suction No. Hose Hose Hose Part No. Rows Size GPA Size Size

BU 8B1 BU 8L BU 12B1 BU 12L BU 16B1 BU 16L

8 8 12 12 16 16

3/8" 5/8" 3/8" 5/8" 3/8" 5/8"

1.5-25 3-50 1.5-25 3-50 1.5-25 3-50

3/8" 1/2" 3/8" 1/2" 3/8" 1/2"

1-1/2" FNPT 1-1/2" FNPT 1-1/2" FNPT 1-1/2" FNPT 1-1/2" FNPT 1-1/2" FNPT

Wt. Lbs.

RETAIL

52 $ 1070.66 56 1137.66 57 1378.86 64 1378.86 62 1427.10 70 1563.78

L16C

Squeeze Pump Hoses For Round Hose Spring Loaded Back Plate Squeeze Pumps

Models Available for Round Hose Spring Loaded Back Plate Squeeze Tube Pump No. Metering GPA Discharge Suction Wt. Part No. Rows Hose Size Rating Hose Size Hose Size Lbs. RETAIL BU L6C 6 1/2" High (7-55) 1/2" 1" 33 $ 682.06 BU L8C 8 5/16" Low (3-23) 3/8" 1" 34 789.26 BU L8LC 8 1/2" High (7-55) 1/2" 1-1/4" 53 1014.38 BU L12SC 12 5/16" Low (3-23) 3/8" 1-1/4" 55 1124.26 BU L12C 12 1/2" High (7-55) 1/2" 1-1/4" 55 1179.20 BU L16C 16 5/16" Low (3-23) 3/8" 1-1/4" 58 1289.08

Part No.

Size

GPA

RETAIL

BU 87250 BU 87249

5/16” 1/2”

3-23** 7-55**

$ 8.31 8.31

For Oval-Shaped Tube with Built-in Backing Plate Squeeze Pumps

Part No.

Size

BU 08-0010 BU 08-0020

3/8” 1.5-25* 5/8” 3-50*

GPA

RETAIL

$ 6.43 10.72

* Max. GPA rating based on 5 MPH, 30” rows. Min. is based on 24 pulses per minute. ** Max. rating based on 5 MPH, 30” rows, Min. is based on 48 pulses per minute.

Squeeze Pump Accessories

Pump Drives & Optional Accessories D

DRV3300

DRV3200 Wt. Part No. Description Lbs. RETAIL BU DRV3300 Universal Ground Drive Assembly Spring loaded (fits up to 7X7 bar). Ships unassembled & less tire (uses 5.0x15 or 760x15 tire) for NGP Pumps. 195 $ 1700.46 BU DRV3200 Universal Drive Assembly with Jack Shaft for Planter Hex Shaft Drives, Fits up to 7X7 Bar........................................... - 842.86 BU DRV3250 Universal Planter Mount Kit for ALL Squeeze Pumps (NEW STYLE).............. 50 936.66 BU L4513 Sprocket Package-Complete: Includes L1414 & L4414; 8T, 9T, 10T, 15T, 22T, 23T, 26T, 30T & 31T Sprockets, L4513. 21 376.54

Part No. BU L1414 BU L14141 BU L4414 BU L44141 BU 112838 BU 112839 BU L1383 BU L1384 BU L1385 BU L1386 BU L1381 BU L1387 BU L1388 BU L1389 BU L1390 BU L1391 BU L1392

Description RETAIL Sprocket Adapter: 7/8" Bore..... $ 41.27 Sprocket Adapter: 1" Bore........ 41.27 Sprocket Retainer: 7/8" Bore.... 32.16 Sprocket Retainer: 1" Bore....... 32.96 Sprocket Retainer: 7/8" Hex...... 45.56 Sprocket Adapter: 7/8" Hex....... 39.93 8 Tooth Sprocket....................... 19.56 9 Tooth Sprocket....................... 26.53 10 Tooth Sprocket..................... 16.08 15 Tooth Sprocket..................... 25.59 20 Tooth Sprocket..................... 41.27 22 Tooth Sprocket..................... 38.59 23 Tooth Sprocket..................... 37.25 26 Tooth Sprocket..................... 40.87 30 Tooth Sprocket..................... 58.29 31 Tooth Sprocket..................... 60.30 32 Tooth Sprocket..................... 50.65

U-Bolts (Plated Steel) Part No. Description RETAIL BU 115907-01A * 7” x 7” U Bolt..................... $ 42.21 BU 115907-01B * 4” x 4” U Bolt..................... 15.41 BU 115907-01C * 4” x 6” U Bolt..................... 16.08 BU 115907-01D * 6” x 6” U Bolt..................... 17.29 * Includes 3/4” Thread, Nuts & Lock Washers

U-Bolts are Sold Separately - See Right DULTMEIER SALES • OMAHA, NE

(800) 228-9666

•

www.dultmeier.com

• DAVENPORT, IA

(800) 553-6975

E0250

174

Manifolds • Flow Dividers • Drive Kits Variable Rate Hydraulic Drive Kits

Flow Dividers These Flow Dividers will accurately divide liquid products across a wide range of application rates. They have the most accurate distribution of any automatic flow divider system on the market. They provide unsurpassed accuracy with application rates as low as 10 GPA and as high as 80 GPA on 30" row spacing at 5 MPH. 316 stainless steel sleeve can be easily removed for cleaning in the field. Plus the alignment indicator ensures that the sleeve can be removed, cleaned and replaced exactly in the same position every time.

For NGP Pumps

Bar Mount Kits: VRH-JD-10 Variable Rate Hydraulic Drive Kit for John Deere CANbus Planters Using GreenStar™ GS2 and GS3. Kit includes: bar mounting bracket, chain, sprockets, hydraulic motor, PWM flow control manifold, custom adapter harness and setup instructions with parts listing for obtaining off-the-shelf components to complete installation. Used with NGP6055, 7055, 8055 and 9055 pumps.

Features: • 316 Stainless Steel body is corrosion resistant. • Viton® O-rings are used for positive sealing for hard to handle products. • Field repairable without removing distribution lines. • Outlets are 1/4" FPT & Maximum Flow per outlet is 2.25 GPM (Minimum is 0.25 GPM per outlet). Can plug outlets not needed. Part No. Outlets Inlet Wt. RETAIL BU FD0610-ADJ * 6 3/4” FPT 6 lbs. 494.46 BU FD1210-ADJ * 12 3/4” FPT 10 lbs. 668.66 BU FD2010-ADJ * 20 1” FPT 14 lbs. 1244.86 BU 115406-A FD1210 & FD0610 Needle & Seal Kit............................. 125.96 BU 115407-A FD1210 & FD0610 Seal Kit... 50.92 BU 115433-A FD2010 Needle & Seal Kit..... 280.06 BU 115434-A FD2010 Seal Kit................... 72.36 BU 116064 FD1210 & FD0610 Adj. Conversion Kit...................... 64.32 BU 116065 FD2010 Adj. Conversion Kit. 64.05 * Adjustable Version.

VRH-JD-15 Multi-SectionVariable Rate Hydraulic Drive Kit for John Deere CANbus Planters using GreenStar™ GS2 and GS3. Same as above except with harness to control up to (7) individual section valves.

VRH-PWM-10 Variable Rate Hydraulic Drive Kit for Raven, Ag Leader, Trimble and other systems that can control a PWM valve. Motor has manifold with PWM valve and Raven-type plug. Kit includes: bar mounting, bracket, chain, sprockets, hydraulic motor, PWM flow control manifold and setup instructions. Used with all NGP and LM pumps.

3/4" Inlet 1/4" Outlet

Use with John Blue 1 PSI Check Valves

Direct Drive Kits: VRH-PWM-15 Variable Rate Hydraulic Drive Kit for Raven, Ag Leader, Trimble and other systems that can control a PWM valve. Motor has manifold with PWM valve and Raventype plug. Kit includes: mounting bracket for NGP-6055 and NGP-8055 pumps, chain, sprockets, hydraulic motor, PWM flow control and setup instructions.

Viton® is a registered trademark of DuPont Performance Elastomers D

Conversion Kits for Manifold Systems Kits for Converting the 1770NT John Deere Manifold System to the CDS John Blue Flow Divider (for planters built 2012 and after)

CONVERSION Part No. BU 116098 BU 116099

KITS: Description RETAIL 16 Row Kit includes 16 Outlet Flow Divider, (16) 1 PSI Check Valves & All Necessary Plumbing...... $ 1563.78 12 Row Kit includes 12 Outlet Flow Divider, (12) 1 PSI Check Valves & All Necessary Plumbing...... 970.16

Use these kits when just adding flow monitors to 1770NT John Deere Planters (planters built 2012 and after). Kits will bolt directly to your manifold.

Manifolds Features: • Use with clear liquids for even distribution when used with proper size orifices. • By interchanging the orifice size you can adjust the application range. • Constructed of domestic investment cast stainless steel, which will last for many years.

KITS: Description RETAIL 16 Row Kit includes (4) Sets of 4 Flow Monitor Assembly, Backing Plate, Mounting Bracket, Tubing & All Necessary Plumbing............................................. $ 712.88 12 Row Kit includes (3) Sets of 4 Flow Monitor Assembly, Backing Plate, Mounting Bracket, Tubing & All Necessary Plumbing............................................. 548.06

DULTMEIER SALES • OMAHA, NE

BAR MOUNT KITS: Part No. Description RETAIL BU VRH-JD-10 Hydraulic Drive Kit for John Deere CANbus Planters Using GreenStar™ GS2 & GS3.......... $ 2876.98 BU VRH-JD-15 Multi-Section Hydraulic Drive Kit John Deere CANbus Planters Using GreenStar™ GS2 & GS3 3639.44 BU VRH-PWM-10 Hydraulic Drive Kit for Raven, Ag Leader, Trimble & Other Systems for NGP-6055 & 8055.......... 1806.32 MT 01515 Microtrak Poly Flowmeter (Req’d for JD Ssytems). 629.80

DIRECT DRIVE KITS: Part No. Description RETAIL BU VRH-PWM-15 Hydraulic Drive Kit for Raven, Ag Leader, Trimble & Other Systems for NGP-6055 & 8055........... $ 1606.66 BU VRH-PWM-17 Same As Above Except with Bracket to Fit NGP-7055 & NGP-9055.................................... 1672.32 RV RFM60P 1-1/2” Raven Flowmeter (Req’d for Raven Systems). 629.80

VisaGage II Kits

CONVERSION Part No. BU 116107 BU 116108

VRH-PWM-17 same as above except with bracket to fit NGP-7055 and NGP-9055.

(800) 228-9666

• Rating is 250 PSI. Part No. Outlets BU 114015 BU 113934 BU 114382

•

www.dultmeier.com

4 12 16

Inlet

113934

Outlet Const.

Wt.

1-1/2” FPT 3/4” FPT 304 SS 1" FPT 1/4" FPT 304 SS 1" FPT 1/4" FPT 304 SS

3 lbs. 3 lbs. 3 lbs.

• DAVENPORT, IA

(800) 553-6975

RETAIL

$ 163.48 180.90 199.66

E0976

Ground Drive Pumps NGP Piston Pumps

175

Ground Speed Oriented for Precise Fertilizer Application

NGP Piston Pumps give the grower the most modern engineering design and technology available. The NGP offers excellent enhancements, plus all the features and benefits of the proven “LM” pumps growers have successfully used for many years.

Features: • Output rate can be set before application begins & the GPA application will remain accurate regardless of speed changes. • Single valve cap making it easier to service in the field. • Check valve design with o-ring enhances priming and is more forgiving with debris and has better accuracy. • Simple to inspect plunger packing without removing hoses; New 3 stage universal piston rod seals. • Standard main shafts across the entire NGP line, all clutches fit all models. • Newly designed setting wrench that is universal for all models. • Footprints are the same as LM Series Pumps; Variable Rate Ready. See adjacent pages for variable rate controls. • Variety of Drives & Flow Dividers Available - See Adjacent Pages.

GPM @ Max. Wt. Part No. 450 RPM PSI Ports Clutch Lbs. RETAIL BU NGP4055 Single Piston, Med. Volume 10.2 120 1” FPT/2” SP Flng None 60 $ 1780.86 BU NGP6055 Single Piston, Med. Volume 21.0 120 1-1/2” None 62 1687.06 BU NGP7055 Single Piston, High Volume 34.2 120 1-1/2” None 93 2020.72 BU NGP8055 Dual Piston, High Volume 42.0 120 1-1/2” None 125 3047.16 BU NGP9055 Dual Piston, High Volume 68.4 120 1-1/2” None 155 3067.26 BU 115670 Rope Pull Clutch........................................................................................................ 743.70 BU 115671 Hydraulic Clutch........................................................................................................ 817.40 BU 115672 12 Volt Clutch............................................................................................................. 1151.06 BU 116344-91 Pulsation Dampener for NGP Pumps - For Low RPM Applications.......................... 93.13 BU 115631-01 Setting Wrench for NGP Ground Drive Pumps.......................................................... 27.60

NGP PUMP REPAIR KITS Pump Model

Gasket Suction Discharge Repair Valve Valve Operators Kit Assembly Assembly Kit

NGP6055

115788 115706-91 115707-91 BU115787

NGP7055

115688 115606-91 115607-91 BU115787

NGP8055

115789 115706-91 115707-91 BU115787

NGP9055

115689 115606-91 115607-91 BU115787

NGP Dual Adjustable Rate Piston Pumps Features: • Apply (2) products with one piston pump. • Use only one drive system (DRV3300, 3200 etc.). • Independently adjustable stroke. • 5 to 1 Maximum ratio between pumping sides. (10:1 on NGP5655AR); 2:1 min. ratio. • Ideal for starter fertilizer on one side and nitrogen on the other side. (Ex: 5 GPA starter fertilizer & 10-25 GPA NPK; 7 GPA starter fertilizer & 14-35 GPA NPK). • Double piston-double acting.

• Variable Stroke. • Rated Flow: 8055AR: 42 GPM total, 21 GPM per side. 9055AR: 34.2 GPM total, 68.4 GPM per side. 5655AR: 31.2 GPM total; 21.0 & 10.2 GPM • Rated Pressure is 120 PSI. • Rated Speed: 450 RPM maximum.

Total GPM Max. Max. Inlet Outlet Wt. Part No. Pump @450 RPM PSI Ratio Ports Ports Clutch Lbs. RETAIL BU NGP5655ARF * Adjustable Rate Piston 31.2 120 10:1 1-1/2” FPT/2” SP Flng 1” FPT/2” SP Flng None 125 lbs. $ 2677.32 BU NGP8055AR Adjustable Rate Piston 42.0 120 5:1 1-1/2” FPT 1-1/2” FPT None 125 lbs. 2611.66 BU NGP9055AR Adjustable Rate Piston 68.0 120 5:1 1-1/2” FPT 1-1/2” FPT None 125 lbs. 3157.04 * 1-1/2” FPT / 2” Standard Port Flanged Ports.

We now have our Catalogs as well as Parts Schematics online!

NGP Hydraulic Drive Pumps for Variable Rate Applications These NGP “HY” Pumps will handle your variable rate applications. Provides for quick and precise rate changes over a wide range of rates. All models are supplied less the Hydraulic Motor and Pulse Width Modulated (PWM) Valve. You can bolt on your own SAE A two D bolt hydraulic motor and utilize your own PWM hydraulic control valve. Or you can purchase the Hydraulic Motor/PWM Valve Package shown below. Compact Design. No ground drive wheel assembly John Blue Pumps shown with is required with these pumps.

www.dultmeier.com

116205-91 Hydraulic Motor/PWM

Valve (sold separately) Max. Max. GPM Max. Turndown Part No. @ 450 RPM PSI Ratio Port Size RETAIL BU NGP4055HYF 10.2 120 9:1 1” FPT / 2” SP Flange $ 1151.06 BU NGP6055HYF 21.0 120 9:1 1” FPT / 2” SP Flange 1124.26 BU NGP7055HY 34.2 120 9:1 1-1/2” FPT 1453.90 BU NGP7055HYF 34.2 120 9:1 1” FPT / 2” SP Flange 1405.66 BU NGP9055HY 68.4 120 9:1 1-1/2” 2142.66 BU 116205-91 Hydraulic Motor / PWM Valve to fit Pumps Above.......... 1177.86 NOTE: Oil Flowrate Required for Maximum GPM is 10 GPM.

DULTMEIER SALES • OMAHA, NE

(800) 228-9666

•

www.dultmeier.com

• DAVENPORT, IA

(800) 553-6975

E0249

Injection Metering Pumps & Valves

176

Injection Check Valves

Irrigation Injection

Chemical Injection Metering Pumps E-Z Meter Pumps are designed to inject a wide variety of chemical products at pressures up to 150 psi. Injection ranges from 1.6 to 470 GPH (gallons per hour.) All wetted D parts are 316SS or chemically resistant polypropylene. (Teflon also available for acid applications). Also features double ball built-in check valves and replaceable piston cups. Pumps are easily maintained and serviced. Injection rates can be changed by a simple change of the stroke on the piston. Pumps are available in a single piston design or in a double pump design for higher capacities or for injecting 2 different products or 2 injection rates. Pump drives are available in 1 Phase or 3 Phase electric motors, gas engine, 12 Volt or belt/pulley drive where you supply the power source. 1 Phase motors are 110-220 Volt, 3 Phase motors are 220-440 Volt. Simplex Single Piston Units Part No. BU 10620 BU 20620 BU 01620 BU 11630 BU 21630 BU 01630 CE VM3538

GPH Drive Design Wt. RETAIL 5-30 1/2 HP, 1 Phase..................... 68 lbs. $ 1606.66 5-30 1/2 HP, 3 Phase..................... 68 lbs. 1539.66 5-30 Pulley Drive - No Motor........ 50 lbs. 1715.20 10-100 1/2 HP, 1 Phase..................... 68 lbs. 1802.30 10-100 1/2 HP, 3 Phase..................... 68 lbs. 1660.26 10-100 Pulley Drive - No Motor........ 50 lbs. 1885.38 1/2HP, 3 Phase Motor for 20620 & 21630............... 251.92

SSQ75 Stainless

PPQ50 Poly

Features:

Mounting Mounts directly to a coupling in the sidewall of lines 6 inches and larger. For smaller lines the check valve may be mounted to a coupling attached to a nipple (of the length required), to hold the tip of the check valve near the center of the line.

• Provides Back Pressure to Insure Metering Accuracy. • Prevents Back Flow. • Prevents Bleed Through When Water Pressure is Low or Line is Drained. • Prevents Siphoning When Metering Pumps are Off and Line is Flowing.

Specifications: 3/4” NPT Line Connection • Check Material is Viton® • Spring Material is 316SS • Maximum Pressure is 150 PSI. Injection Check Valves: Inlet Flow† Max. Part No. Material Size GPH Temp. CX PPQ50 Polypropylene 1/4” 50 120° F. CX SSQ75 Stainless 1/2” 200 150° F. † At 50 PSI Differential. 5% on 12 Units

RETAIL $ 37.12 181.91

The Bleeder Valve from Agri-Inject is versatile and simple - and is the perfect complement to the Mister Mist'r® injection check valve. Put the two together to create an unbeatable assembly for controlling and adjusting your chemigation system - or use the bleeder valve alone for small-scale irrigation in nurseries or greenhouses.

Bleeder Valves: Part No. Body CX MMBP Poly

Inlet 1/4" FPT

Outlet RETAIL 1/4" MPT $ 19.10

Injection Check Valves

Duplex Double Piston Units Part No. GPH Drive Design BU 10622 5-30, 5-30 1/2 HP, 1 Phase............. BU 20622 5-30, 5-30 1/2 HP, 3 Phase............. BU 01622 5-30, 5-30 Pulley Drive - No Motor BU 10623 5-30, 10-100 1/2 HP, 1 Phase............. BU 20623 5-30, 10-100 1/2 HP, 3 Phase............. BU 01623 5-30, 10-100 Pulley Drive - No Motor BU 10633 10-100, 10-100 1/2 HP, 1 Phase............. BU 20633 10-100, 10-100 1/2 HP, 3 Phase............. BU 01633 10-100, 10-100 Pulley Drive - No Motor Note: Flow Rates are shown per side.

Injection Check Valves allow chemicals to be injected into the turbulent flow near the center of the line, providing more uniform dispersion. The disk type check and seat are located at the tip of the check valve to allow constant flushing.

316 Stainless Steel or Polypropylene construction. Viton® internals. Not suitable for sulfuric acid. Heavy spring loaded check valve offers added protection against siphoning effect, and prevents backup of water into the solution system. Injection tube places solution near the center of the irrigation pipe for positive mixing. 1/4" FPT x 1/4" MPT. 6.3” Long. Flow is 100 GPH. Opening pressure: 10 PSI. Note: Meets Nebraska state regulations.

Wt. RETAIL 75 lbs. $ 3138.28 75 lbs. 2941.30 55 lbs. 2572.80 75 lbs. 3209.30 75 lbs. 3159.72 55 lbs. 2717.52 75 lbs. 3474.62 75 lbs. 3245.48 75 lbs. 2870.28

5/8”

1/4” FPT

2-1/2”

3-1/8”

115026-HS

316 Stainless Steel

1/4” MPT

Diaphragm Injection Pump The modular design of the DI-2135 allows the user to choose the number of individual pumping heads required for their application.Individual pumping heads can be quickly added or removed in the field allowing for maximum versatility.

3-1/2” 1/4” FPT

CV1310 Polypropylene

1/2” MPT

1/4” FPT

1/2” MPT 3-1/2”

1/2” MPT D

CV1310-BL FEATURES: • Available with a single phase or three phase Baldor electric gearmotor. • Polypropylene, 316 S.S., Viton® o-rings and Teflon wet end components provide a wide array of chemical compatibility. • External check valves. • Low maintenance design incorporates sealed bearings, field serviceable external check valves, Teflon diaphragms and a drive system that does not require oil. • Individual pumping heads provide 35 GPH @ 100 PSI. • Micrometer style flow rate adjustment for each individual pumping head. • Available with 1/4” female pipe thread ports, barb fittings, or push-connect fittings.

Call for Pump Sizes & Pricing Viton® is a registered trademark of DuPont Performance Elastomers

DULTMEIER SALES • OMAHA, NE

(800) 228-9666

•

Part No.

BU 115026-HS BU CV1310 BU CV1310-BL BU 115040

Polypropylene

See Injection Pump Replacement Parts on Our Website www. dultmeier.com or Scan QR Code Below www.dultmeier.com

RETAIL

316 SS Check Valve................. $ 92.46 Polypropylene Check Valve...... 27.87 Polypropylene Check Valve with Bleeder Valve........................... 36.85 Repair Kit for 316SS Valve....... 28.27

• DAVENPORT, IA

Download Here

(800) 553-6975

Download Here

E0251

Submersible Sewage Pumps

177

Submersible Sewage / Wastewater Pumps Rexa PRO

This heavy-duty line of submersible sewage pumps offers superior quality paired with detail-oriented, German engineering. The Rexa PRO Series of sewage pumps is a solid choice for wastewater and sewage water applications. This series can produce flow rates up to 550 GPM with a maximum of 110 feet of head. Not all models shown. Features: • Electrical Connections: 1PH - 230V / 3PH - 230V / 3PH - 460V • Solids Passage up to 3” • Maximum Immersion Depth: 66 feet • Sludges up to 8% Dry Matter • Clog-Resistant Vortex Impeller • FM Explosion-Proof Rated Motor • Dual Mechanical Shaft Seals

• Wet Pit Only Installation • Buna-Nitrile Seals are Standard with Silicon Carbide Seal Faces (Viton® Available) • Cast Iron Housing • 40ft power cord supplied • Thermal and Moisture sensor cables included Part No.

WO 6073267 WO 6073277 WO 6073281 WO 6073283 WO 6073285

Port Size Motor 2” ANSI Flange 2 HP/230V/3PH 2-1/2” ANSI Flange 2 HP/230V/3PH 2-1-2” ANSI Flange 5 HP/230V/3PH 3” ANSI Flange 3.5 HP/230V/3PH 3” ANSI Flange 5 HP/230V/3PH

Flow Rate Shut Off 140 GPM @ 10’ 39’ 300 GPM @ 8’ 30’ 350 GPM @ 16’ 43’ 400 GPM @ 16’ 42’ 450 GPM @ 15’ 48’

Wt. RETAIL 103 lbs. $ 2371.80 132 lbs. 3131.58 141 lbs. 3394.22 155 lbs. 3374.12 160 lbs. 3366.08

Rexa CUT

The Rexa CUT Series is an ideal choice for pressure sewer applications – either municipal or industrial – when pumping water containing sewage. The unique cutter design yields fine solids for non-clogging operation. This unit is highly resistant to obstructions and blockages. The Rexa CUT Series tops out at 85 GPM with a max head of 140 feet. Features: • 304SS Motor Housing

• Power Connection Options: 1 PH, 230V, 60Hz / 3 PH, 230V, 60Hz / 3 PH, 460V, 60Hz

• Standard Buna-Nitrile Seal with Silicon-Carbide/ Silicon-Carbide Heavy Duty Seal Face

• Maximum Solid Passage in this series is 1.5”

• Submerged Operating Mode: Continuous Duty Part No.

WO 6082813

Port Size

Motor

1-1/2” ANSI Flange

• Power Cord Supplied Flow Rate

Shut Off

3 HP/3PH/230V 85 GPM @ 10’

95’

Wt.

RETAIL

72 lbs. $ 1323.92

Call With System Specifications for Pump Sizing More Models Available to Meet Your System Needs!

FA Series

This pump series is the largest capacity wastewater and sewage pump line that WILO offers. With flow rates capable of up to 40,000 GPM this pump is designed to serve the following industries: sewage collection, storm water, raw water, sewage treatment, dewatering, and other various industrial application. Features: • Maximum Flow: 40,000 GPM • Maximum PSI: 181 • Dry or Wet Pit Installation Options Available • Silicon Carbide Mechanical Seals (Buna Standard) • HP: 3/4 - 1000 • Discharge Ports: 2” – 24” • Maximum Temperature: 104° F • Special Ceram® Ceramic Coatings • Special Materials: Stainless Steel, High Chrome Cast Iron, Ductile Cast Iron D

• Cast Iron Volute with Stainless Steel Shaft is Standard • Solids passage up to 7” in Diameter

Call With System Specifications for Pump Sizing and Pricing DULTMEIER SALES • OMAHA, NE

(800) 228-9666

•

www.dultmeier.com

• DAVENPORT, IA

(800) 553-6975

E1248

Sump & Effluent Pumps

178

ECC Series Sump Pump

- Submersible Pump Float Options -

1-1/2” FPT x 1-1/4” FPT

Mechanical Lever The Lever Switch is actuated by a float ball or cylinder that is attached to a rod. When water rises or drops, the float adjusts with the water level until it hits a preset float stop on the rod. The float stops are simply screwed to the rod. Once the float hits a stop, the mechanical lever switch turns the pump on or off – depending upon whether the stop is either at the high level or low level.

The ECC Sump Pump has a cast iron housing and volute. Thermoplastic Vortex impeller with a stainless-steel bottom screened inlet. There is a replaceable tether float switch. This unit also boasts, a permanent split capacitor motor and thermal overload protection. 1-1/2” NPT discharge with a 1-1/4” adapter that is included. The unit is also supplied with a 10’ power cord. Maximum solids passage is 3/8”. * Buna seals.

Auto Part No. Motor Flow Rate Shut Off Switch

WO 2708304 1/2HP/1PH/115V 38 GPM @ 10’

22’

Auto

HP Ratings are for direct motor control. 115V can be ran up to 2HP Max & 230V can be ran up to 3HP Max. Float Options listed below are NEMA Type 1. Call for Options in NEMA Type 4 or Type 7. 3 Phase Power must use a control panel – cannot run direct motor control. Designed for Easy Installation and removal through 6-1/4” hole in the wet well cover. Includes: (1) Two pole float switch • Stainless steel float rod • Guide for float rod • Stainless steel float • Adjustable brass stops • Pedestal assembly with bottom plate. Plate mounts over the lever control hole in the wet well cover.

Wt. RETAIL 22 lbs. $ 141.71

System Type

Part No.

WO 8202K2014 Simplex Std - On/Off WO 8201K2015 Simplex Std - On/Off

ECS Series Sump Pumps 1-1/2” FPT x 1-1/4” FPT

Wt. RETAIL 35 lbs. $ 845.54 35 lbs. 661.96

Tethered Floats sense the liquid level by the position of the float itself. As the water rises, it lifts the float and actuates an internal mechanical switch. Pilot Duty floats are pipe mounted to a basin cover or basin wall. HP Rated floats are typically mounted to a discharge pipe.

19’ 22’

Auto Auto

Wt. RETAIL 22 lbs. $ 192.63 23 lbs. 207.70

• HP Rated Float Switches have a piggyback plug end • Simplex Systems Require 3 Floats (Off, On, High Water) • Duplex Systems require 4 floats (Off, Pump 1, Pump 2, High Water)

Call for Pricing

WCC Series Sump Pump 2” NPT The WCC Sewage/Effluent Pump Series has a cast iron housing and volute. This series has a thermoplastic vortex impeller and a replaceable float switch for automatic operation. It has an oil-filled motor for maximum heat dissipation. WO2708301 is able to handle solids up to 2”. While the WO2708302 is able to handle solids up to ¾”. 10’ Power cord included. * Buna seals.

Auto Part No. Motor Flow Rate Shut Off Switch

WO 2708301 1/2HP/1PH/115V 60 GPM @ 5’ WO 2708302 1/2HP/1PH/115V 83 GPM @ 5’

14” 28”

Tethered Floats

Auto Part No. Motor Flow Rate Shut Off Switch

10’ 8’

Duplex & Other Simplex Options Available Upon Request Call With Systems Specifications

The ECS Effluent Sump Pump has a 304 stainless-steel motor housing with a cast iron volute. This unit has a thermoplastic vortex impeller with a vertical float arm. The motor is oil-filled for maximum heat dissipation. The unit is 1-1/2” NPT but comes with a 1-1/4” NPT adapter. Handles up to ½” solids. 10’ power cord is included. * Buna seals. WO 2708306 1/3HP/1PH/115V 40 GPM @ 10’ WO 2708307 1/2HP/1PH/115V 48 GPM @ 10’

Wet Well Pedestal Max. Depth Height

27’ 18’

Auto Auto

Wt. RETAIL 23 lbs. $ 161.81 25 lbs. 161.81

Pressure Diaphragm Pressure Diaphragms sense liquid level changes by pressure changes measured through the diaphragms which then actuate internal micro switches. Rising water applies pressure to the diaphragm which then causes the switch to be actuated. Mounting options vary depending upon the float type. 115V Switches. Switch Only Options Rated to 1HP. Use with Weil 8100 Control Panels. Mounting hardware available. Cord Part No. Description Length Amps Wt.

RETAIL WO 8223K6001 Switch Only with Grip Cord** 20’ 4 10 lbs. $ 202.34 WO 8223K6002 Switch Only with Grip Cord** 40’ 6 10 lbs. 202.34 WO 8223K6003 Switch Only with Grip Cord** 60’ 8 10 lbs. 292.12 WO 8224K1021 Pipe Mounted Piggyback* 15’ 2 15 lbs. 237.18 WO 8224K1032 Motor Mounted Piggyback* 15’ 2 15 lbs. 237.18 * Mounting Bracket Included. ** Mounting Hardware Not Included, But Available.

Level Transmitters This style measures the atmospheric pressure to determine the liquid level. Both probe and base units have a ½” MPT end that allows the unit to be pipe mounted. The base unit may also be floor mounted. • Available in standard or intrinsically safe construction • Only compatible with PLC Control Panels

Call for Pricing DULTMEIER SALES • OMAHA, NE

(800) 228-9666

•

www.dultmeier.com

• DAVENPORT, IA

(800) 553-6975

E1249

Control Panels & VFD’s

179

Control Panels & Variable Frequency Drives NPP Series The NPP Series Control Panels are built to order and are provided with a motor disconnect and short circuit protection. The standard pump panel comes with the melting alloy type thermal overload. Or, as an option, the panel can be provided with Solid State Overload protection. Solid-state overload relays are designed to protect three phase AC motors from overload, phase unbalanced and phase loss conditions. The solid-state overload relay has a selectable trip: Class 10, Class 20, or Class 30. Features & Benefits of Standard NPP Series Panels • Full Gasket Hinged Door with Provision for Padlocks • UL Listed and Suitable for Use as Service Equipment • Heavy Duty Flange Fusible Disconnect Switch • NEMA Full Voltage Magnetic Motor Starter

Call With System Specifications for Pricing Weil Pumps Control Panels Also Available

Simplex Pump Panels This WILO product line comes standard in NEMA 3R three phase enclosure with fused disconnect. The Simplex Pump Panels boast a robust UL-Listed Design. Industrial-duty NEMA starter with electronic overload (Class 10/20) comes standard. Pump Run Switch is a three-position switch (Hand-Off-Automatic). The Control Terminal Board is numbered and wired. Features & Benefits: • 60Hz 230/460V • Fused Lockable Panel Disconnect • Mechanical Lock Prevents Door from Being Opened While Disconnect is in the ON Position (lock not included) • Requires 3x class LPJ fuses • K9041 Nema-Rated Variable Frequency Drive (VFD) – Optional Adder • K9031 Nema-Rated Soft Starter with Electric Overload – Optional Adder

Call With System Specifications for Pricing Weil Pumps Control Panels Also Available

WILO Variable Frequency Drives (VFD) Variable Frequency Drives help to elongate the life of a pump motor. A VFD allows the end-user to manipulate the speed at which the motor turns. Therefore, if their application only calls for the motor to run at 75% capacity, they can set this through their VFD and prolong the life of the motor and reduce energy consumption costs.

• • • • • • • • • •

Features & Benefits: Run Dry Detection Flow Compensation/Sleep Mode 2 Step Ramps (initial ramp) Pipe Fill Mode Built-in Motor Alternation Feature No/Low Flow Detection End of Pump Curve Detection Pump Cascade Controller Temperature Range: 37° F. to 122° F. Up to 3,250 Ft. Elevation (Call for Additional Applications)

Call With System Specifications for Pricing DULTMEIER SALES • OMAHA, NE

(800) 228-9666

•

www.dultmeier.com

• DAVENPORT, IA

(800) 553-6975

E1250

Sump • Specialty • Magnetic Drive Pumps

180

Sewage Sump Pumps Little Giant Sewage Pumps for high volume transfer of liquids with solids up to 2" diameter. Completely submersible design. Ideal for Commercial, Agricultural or Industrial applications where large solids may be present. Standard Features: Oil filled motor housings for lifetime lubrication • Mechanical type seals of Nitrile/ceramic/carbon construction • Thermal overload protection • Cast Iron pump housings with Epoxy coating for added corrosion resistance. All motors are single, phase, (three phase available in some models). All pumps are UL/CSA approved. 9S-CIM: Manual pump rated to 110 gpm @ 10' height, (30 gpm @ 15' height). Shut-off height is 20'. Motor is 4/10 hp , 115 volt motor with 20' power cord. Discharge port is 2" FPT. Handles solids to 2". Dimensions: 11-1/2" H x 11-1/2" L x 7" W. Weight 35 lbs.

9S-CIARFS: Same as above but with remote automatic float switch for “on” at 9-14", off at 2-5". 10S-CIM: Manual pump rated to 120 gpm @ 5' height, (70 9S-CIM gpm @ 15' height). Shut-off height is 25'. Motor is 1/2 hp, 115 volt with 20' power cord. Discharge port is 2" FPT. Handles solids to 2". Dimensions: 11-1/2" H x 11-1/2" L x 7" W. Weight 36 lbs. 10S-CIARFS: Same as above but with remote automatic float switch for “on” at 9-14", off at 2-6" liquid level. Part No. Motor

GJ 9S-CIM 4/10hp-115v GJ 9S-CIARFS 4/10hp-115v GJ 10S-CIM 1/2hp-115v GJ 10S-CIARFS 1/2hp-115v GJ 14S-CIM 1/2hp-115v GJ 16S-CIM 1hp-230v GJ 20S-CIM 2hp-230v

Maximum Automatic Wt. Flow Switch Lbs. RETAIL

110 GPM @ 5’ 110 GPM @ 5’ 120 GPM @ 5’ 120 GPM @ 5’ 100 GPM @ 10’ 160 GPM @ 10’ 205 GPM @ 10’

36 $ 452.92 39 487.76 43 525.28 45 558.78 88 994.28 94 1244.86 96 1562.44

No Yes No Yes No No No

14S-CIM: Manual pump rated to 100 gpm @ 10' height. Shut-off is 25'. Motor is 1/2 hp, 115 volt with 20' power cord. Discharge port is 3" FPT. Handles solids to 2". Standard with cast iron impeller. Dimensions: 17-3/16" H x 14-1/16" L x 9-7/8" W. Weight 80 lbs.

16S-CIM: Manual pump rated to 160 gpm @ 10' height. Shut-off is 35'. Motor is 1 hp, 230 volt with 20' power cord. Discharge port is 3" FPT. Handles solids to 2". Standard with 10S-CIARFS cast iron impeller. Dimensions: 17-3/16" H x 14-1/16" L x 9-7/8" W. Weight 88 lbs. 20S-CIM: Manual pump rated to 205 gpm @ 10' height. Shut-off is 75'. Motor is 2 hp, 1 ph, 230 volt with 20' power cord. Discharge port is 3" FPT. Handles solids to 2". Standard with brass impeller. Dimensions: 19-1/8" H x 12-7/8" H x 7-5/8" W. Weight 96 lbs.

14S-CIM Check pump components for compatibility if chemical solutions are to be removed.

Specialty Pumps Submersible Parts Washer Pump Little Giant Brand. For use with Stoddard Solvent and deodorized Kerosene. Cast aluminum housing, Viton® seal & nylon head. Thermally protected. Outlet is 1/4" MPT. Supplied with a 6 ft. 3 conductor cord with a 1/2" MPT builders fitting at cord outlet for conduit connection. Handles unheated liquids up to 100° F. with a minimum 140° flash point. Solutions must be compatible with pump materials. Flow rate is 205 GPH at 1' head. 4-1/4" x 4-1/8". Entire pump must be submerged.

These pumps are ideal for light volume transferring or recirculating of chemical solutions. Specifically engineered for highly specialized applications. Submersible and Non-submersible models. NK1 Submersible pump designed for use in mild acids, alkalies and hard water applications. Perfect choice for automatic soap tank applications. Features: Glass-filled, corrosion resistant, nylon housing • Viton® seal • 1/4" MPT discharge • 6' power cord • Hermetically sealed and filled with special oil for lifetime lubrication • Thermally protected. Dimensions are 4-9/16" x 4-1/8". 2E-NDVR: Non-Submersible pump for use with weak acids, chemicals, cleaning solvents, anti-freeze, potable fluids (pH of 6-7). Features: Nylon front with 3/8" FPT inlet, 1/4" MPT outlet • Stainless steel plate and motor shaft • Viton® seals • 6' power cord • Thermally protected. Dimensions are 4-1/2" H x 5-1/2" L x 3-1/2" W. D

NK1

1YS

Part No. Part No.

GJ 1YS

Power

Washer Pump

115 Volt

Wt.

* Flow Rate

Voltage

RETAIL

GJ NK1 210 GPH 1/150 115 Volt 3.4 lbs. $ 134.00 GJ 2E-NDVR 300 GPH 1/40 115 Volt 5.4 lbs. 209.04

RETAIL

3 lbs. $ 163.15

* Flow rates are based on 1' discharge height.

Magnetic-Drive Chemical Solution Pumps Medium Flow - Low Pressure

Little Giant Magnetic-Drive Solution Pumps are ideal for recirculating or transferring corrosive solutions. Compatible with some acids, alkalis, plating solutions or salt solutions. Rated up to 200° F., 100 SSU viscosity and 1.1 specific gravity. Leak-proof, seal-less magnetic drive eliminates friction loss, wear, leakage, and contamination. Motors are open, fan cooled. Single phase, 115 Volt is standard, (230 Volt optional). Inlet ports are 1/2” FPT or 3/4” FPT. Outlet ports are 1/2” MPT. All pumps shown are UR & CSAC listed. 2MD and 3MD are designed to handle mildly corrosive solutions. 2MDSC and 3MDSC are designed for semi-corrosive solutions. Pump heads and impellers on these units are glass-filled polypropylene. Nitrile O-ring is standard. Designed for intermittent duty. 2MDHC 2MDHC and 3MDHC are designed to handle highly corrosive solutions. Standard with self-lubricating carbon impeller bushing and Viton® O-ring. Pumping head, impeller and D encapsulated magnet are of Ryton construction.These pumps have run/dry capabilities to 8 hours.

2MD

Part No.

**Solution Use

GJ 2MD GJ 3MD GJ 2MDSC GJ 3MDSC GJ 2MDHC GJ 3MDHC

Mildly Corrosive Mildly Corrosive Semi-Corrosive Semi-Corrosive Highly Corrosive Highly Corrosive

1/30 1/20 1/25 1/12 1/30 1/12

GPM* Temperature Wt.

6.85 8.20 6.85 11.0 8.50 11.0

150° F. 150° F. 150° F. 150° F. 200° F. 200° F.

RETAIL

4 lbs. $ 242.54 7 lbs. 294.80 7 lbs. 276.04 8 lbs. 292.12 7 lbs. 332.32 8 lbs. 397.98

* Based on 6' discharge head. Flows will decrease if higher head is required. **Please check compatibility of solutions to be pumped when ordering.

IND

DULTMEIER SALES • OMAHA, NE

(800) 228-9666

•

www.dultmeier.com

• DAVENPORT, IA

(800) 553-6975

E0255

Submersible • Sump • Effluent Pumps

181

Little Giant Effluent Sump Pumps are designed for pumping dirty water with solids handling capabilities up to 3/4" diameter. Completely submersible design. Applications include • De-watering • Construction sites • Sewer/Septic lines • Fountains/waterfalls • Elevator Pits, Car Wash Pits and many more. Standard Features Include: Cast Iron pump housings with Epoxy coating for added corrosion resistance • Oil-filled motor housings for lifetime lubrication • Thermal overload protection • All motors are single phase, (three available on some models) • All pumps are UL/CSA approved. Check pump components for compatibility if chemical solutions are to be removed.

Standard Temperature Pumps

Features:

6E-CIM: Manual pump with flow rates to 50 gpm, (42 gpm @ 10' height). Shut-off height is 22'. Motor is 1/3 hp, 115 volt with 20' power cord. 6 amp draw. Discharge port is 1-1/2" FPT. Handles solids up to 1/2". Seal is Buna. Dimensions: 9-7/8" H x 8-3/4" L x 8-1/2" W. Weight 27 lbs.

• Cast iron pump housings with protective epoxy coating for corrosion and rust resistance. • Vortex Nylon impeller (except 20E-CIM). • Mechanical seals with stainless steel spring, Nitrile, Buna or Viton® parts, carbon and ceramic or Ni-resist faces.

6E-CIASFS: Same as above but with attached float switch for “on” at 7-10" and off at 2-5" liquid levels. Dimensions: 10-1/4" H x 10-1/2" L x 8-1/2" W. Wt. 28 lbs.

• Oil-filled (mineral oil) motor housings for lifetime lubrication and rapid heat dissipation. • Thermal overload protection.

9EN-CIM: Manual pump with flow rates to 80 gpm, (60 gpm @ 15' height). Shut-off height is 32'. Motor is 1/2 hp, 115 volt with 20' power cord. Discharge port is 1-1/2" FPT. Handles solids up to 3/4". Seal is Nitrile. Dimensions: 9-1/8" H x 9-1/2" L x 6-3/4" W. Weight 28 lbs.

• UL listed, CSA approved.

9EN-CIARF: Same as above but with 15' cord and a remote float switch for “on” at 9-14", “off” at 2-6" liquid level. Weight 29 lbs. 6E-CIM

14EH-CIM: Manual pump with flow rates to 60 gpm @ 20' or 40 gpm @ 30' height. Shut-off height is 50'. Handles solids up to 3/4". Motor is 1/2 hp, 115 volt with 20' power cord. Discharge port is 2" FPT. Handles solids to 3/4". Seal is carbon/ceramic/Nitrile. Minimum discharge head 20’. Dimensions: 16-1/8" H x 14-1/16" L x 9-7/8" W. Weight 82 lbs.

16EH-CIM: High Head, Manual pump with flow rates to 90 gpm @ 30'. Shut-off height is 81'. Motor is 1 hp, 230 volt with 20' power cord. Discharge port is 2" FPT. Handles solids up to 3/4". Seal is Nitrile. Minimum discharge head 20’. Dimensions: 16-1/8" H x 14-1/16" L x 9-7/8" W. Weight 82 lbs.

6E-CIASFS

20E-CIM: High Head, Manual pump with flow rates to 135 gpm @ 20' height. Shut-off height is 110' . Handles solids up to 3/4". Motor is 2 hp, 230 volt with 20' power cord. Discharge port is 2" FPT. Seal is Nitrile. Dimensions: 17-1/2" H x 13" L x 8-1/2" W. Weight 92 lbs. Standard with a brass impeller. Minimum discharge head is 20’.

High Temperature/Chemcial Resistant Pumps Rated to 200° F. D

HT10E-CIM: Manual pump with Viton® Seal. Rated to flows up to 73 gpm, (20 gpm at 20' height). Shut-off height is 24'. Handles solids up to 3/4". Motor is 1/2 hp, 115 volt with 15' power cord. Discharge port is 1-1/2" FPT. Dimensions: 10-1/4"H x 9-5/8" L x 9-1/8" W. Weight 38 lbs.

9EN-CIM

HT10E-CIAFS: Same as above but with a float switch for “on” at 11-15”, “off” at 5-9” liquid level.

14EH-CIM

Part No.

Motor

GJ 6E-CIM GJ 6E-CIASFS GJ 9EN-CIM GJ 9EN-CIARF GJ 14EH-CIM GJ 16EH-CIM GJ 20E-CIM GJ HT10E-CIM GJ HT10E-CIAFS

Viton® is a registered trademark of DuPont Performance Elastomers

Max. Flow Auto Switch

1/3hp - 115v 53 @ 5' 1/3hp - 115v 53 @ 5' 1/2hp - 115v 80 @ 5' 1/2hp - 115v 80 @ 5' 1/2hp - 115v 60 @ 20' 1hp - 230v 90 @ 30' 2hp - 230v 135 @ 20' 1/2hp - 115v 73 @ 5' 1/2hp - 115v 73 @ 5'

No Yes No Yes No No No No Yes

Wt.

RETAIL

30 lbs. 32 lbs. 29 lbs. 32 lbs. 82 lbs. 89 lbs. 92 lbs. 38 lbs. 38 lbs.

$ 285.42 300.16 411.38 463.64 1067.98 1175.18 1523.58 745.04 909.86

See Our Tank Accessories Section (Blue) for Optional Float Switches. IND

DULTMEIER SALES • OMAHA, NE

(800) 228-9666

•

www.dultmeier.com

• DAVENPORT, IA

(800) 553-6975

E0256

182

Cast Iron Submersible/Sump Pumps Cast Iron Sump Pumps

Cast Iron Sump Pumps

Little Giant Sump Pumps for pumping of dirty water applications where no solids exist. Submersible design with thermal overload protection. Cast Iron housings with Epoxy coating on all but 5MSP & 5ASP models which feature Zinc housings. Polypropylene base and Polycarbonate base. Available in Manual or Automatic versions. Basic sump pump models shown will handle “grey” or clean water. See “E” series pumps for applications where there may be solids in the water to be removed.

Cast Iron Sump Pumps for dewatering, effluent transfer and dirty water. Motors are 1/3 HP, 115 volt, single phase with built-in thermal overload. Discharge port is 1-1/2" FPT. Rated to 104° F. Body is cast iron, impeller and cover are thermoplastic. All models will handle solids to 1/2" diameter. Pump Dimensions (less float): 9-3/4" L x 6-1/2" W x 10-1/2" H. Standard Features: 10' power cord • Seal constructed of carbon/ceramic/buna • Vertical float switch, remote float switch or manual models ST31A1 • Maximum flows to 60 gpm & 26 ft. head • Available in 3 models.

6CIA

Part No.

Switch

*Max. Flow

GL ST31M Manual 50 gpm @ 5' GL ST31AV Vertical 50 gpm @ 5' GL ST31A1 Remote 50 gpm @ 5' D

6CIA-RFS

Wt.

RETAIL

29 lbs. $ 242.54 29 lbs. 273.36 29 lbs. 254.60

Submersible Pumps D

5MSP: Manual pump with flow rates to 20 gpm, (14 gpm @ 15' height). Shut-off height is 26'. Standard with Viton® seal. Motor is 1/6 hp, 115 volt with 18' power cord. 5 amp draw at startup. Discharge port is 1" FPT. Dimensions: 7-3/4" H x 6-1/16" L x 4-5/16" W. Zinc housing. Weight 9 lbs. 5ASP-FS: Same as above but with remote float switch for “on” at 11" and off at 3". Power cord is 10'. 6CIM-R: Manual pump with flow rates to 45 gpm, (12 gpm at 15' height). Shut-off height is 17'. Motor is 1/3 hp, 115 volt with 25' power cord. 13 amp draw at startup. Discharge port is 1-1/2" FPT. Dimensions: 7-1/4" H x 9-1/4" L x 7-1/4" W. Weight 18 lbs. 6CIA-RFS: Same as above but with remote float switch for “on” at 7-10" and off at 1-4". Standard with 10' power cord. 6CIA: Same as above but with an attached float switch. Dimensions: 6" H x 9-1/2" L x 8-1/2" W. 8-CIM: Manual pump with flow rates to 54 gpm, ( 26 gpm @ 15’ height). Shut-off height is 23’. Motor is 4/10 hp, 115 volt with 25’ power cord. Discharge port is 1-1/2” FPT. Dimensions: 6” H x 9-1/2” L x 8-1/2” W. Weight 19 lbs.

NOTE: Check pump compatibility if chemical solutions are to be removed

GJ 5MSP 1/6HP-115V GJ 5ASP-FS 1/6HP-115V GJ 6CIM-R 1/3HP-115V GJ 6CIA-RFS 1/3HP-115V GJ 6CIA 1/3HP-115V GJ 8-CIM 4/10HP-115V GJ 8-CIA 4/10HP-115V

Max. Flow Auto Switch

20 gpm 20 gpm 46 gpm 46 gpm 46 gpm 54 gpm 54 gpm

No Yes No Yes Yes No Yes

DULTMEIER SALES • OMAHA, NE

Wt.

Snap-Action Switch automatically turns pump on and off at preset fluid depths. Maximum fluid temperature 130° F. On at 7-1/2" - off at 3". Features: Non clogging screenless suction inlet • Non clogging vortex impeller to pass up to 5/8" solids • Cast Iron housing & top • Impeller & base made of Polypropylene • Mechanical seal with corrosion-resistant and stainless steel hardware, Buna-N and carbon/ceramic parts • 43 GPM at 5' head • 19-1/4 ft. shut-off. 1-1/2" NPT discharge. Housing Impeller Volts Dimensions No. & Top & Base HP @ 60 Hz. Amps RPM Height Width 2P547 Cast-Iron Polypropylene 3/10 115 9.7 1550 9-3/4" 10-1/4" Part No.

Wt.

GN 2P547 Submersible Pump..... 22 lbs.

RETAIL

$ 290.78

“Port a Pump” 12-Volt DC Sump Pump from Warren Rupp. This handy dirty water pump can be operated from any 12-volt car or truck battery. Ideal for use when no other power source is available. Rated to a maximum of 43 GPM at 5' discharge or 21 GPM at 20' discharge height. Discharge port is 1-1/2" FPT. 30 Amp draw.

Motor

Zoeller/Flint & Walling Submersible Pump is designed to pump either clear water or effluent. Can be used in elevator pits, home sumps, loading docks, or in other areas where conventional sump pumps would clog or freeze up due to the accumulation of light debris. Unique vertical-path float switch allows pumps to be mounted in narrow pits (12" minimum width).

12-Volt Submersible Pump

8-CIA

8-CIA: Same as above but with attached float switch for “on” at 7-10” and off at 1-4”.

IND

26' 26' 26'

* Flow rates will decrease with higher head pressure.

5MSP

Part No.

Shut-Off

Standard with 30' cable and clamps. Fits 10" openings. Pump dimensions: 10" Diameter x 19-1/4" H.

RETAIL

9 lbs. $ 177.89 9 lbs. 242.54 18 lbs. 241.20 18 lbs. 263.98 18 lbs. 230.48 19 lbs. 340.36 19 lbs. 395.30

(800) 228-9666

SPA12E

Part No.

SO SPA12E

Wt.

12-Volt Sump Pump

37 lbs.

RETAIL

$ 1259.60

Viton® is a registered trademark of DuPont Performance Elastomers

•

www.dultmeier.com

• DAVENPORT, IA

(800) 553-6975

E0257

Stainless Submersible/Sump Pumps

183

Optima Stainless Steel Sump Pumps are an excellent choice for pumping dirty water, semi-dirty water or slurries. Also a good choice for commercial or industrial seepage and effluent. Not for chemical use. Standard Features Include: 3/8" solids handling capability • Rated for continuous duty applications • 304L stainless with high quality corrosion-resistant material • Can be operated whether fully or partially submerged • Built-in thermal protection with automatic reset, (1-phase only) • ISO 2548 Rating • UL/CSA Water resistant cords • Manual or Automatic shut-off • Automatic Units have a 13" Float switch with cord on 1/3 HP and 24" on 1/2 and 1 HP models. EPPD 1/3 HP pumps feature double BUNA seals (oil bath mechanical seal bottom; lip seal top) and Noryl impellers

Stainless Steel

EPD 1/2 HP and 1 HP pumps feature mechanical seals with Viton® elastomers for added chemical resistance. These models are standard with Stainless impellers.

Optima Series

Designed to handle up to 3/8" solids. Available in 1/3 & 1/2 hp, single phase or 1 hp, three phase models. Cords: 20' long on 1/3 hp, 1 hp, 1-1/2 hp and 10' on 1/2 hp. Maximum Temperature: to 120° F. continuous or 140° F. intermittent duty. Ports: 1/3 hp units have 1-1/4" FPT ports, 1/2 hp, 1 hp and 1-1/2 hp have 1-1/2" FPT ports. Part No. *Motor **Max. Flow

EA EPPD-3AS1 1/3hp-1phase+ EA EPPD-3MS1 1/3hp-1phase+ EA EPD-5AS1 1/2hp-1phase EA EPD-5MS1 1/2hp-1phase EA EPD-5MT2 1/2hp-3phase EA EPD-10MT2 1.0hp-3phase EA EPD-15MT2 1.5hp-3phase

Flowrate Shut-Off @ 20’ Head Height Control

45 gpm @ 5' 45 gpm @ 5' 73 gpm @10' 73 gpm @ 10' 73 gpm @ 10' 75 gpm @ 25' 83 gpm @ 25'

14 GPM 14 GPM 49 GPM 49 GPM 49 GPM 74 GPM 85 GPM

26’ 26’ 42’ 42’ 42’ 81’ 85’

Dimensions (Diam. x H)

Automatic 6-3/8" x 10-1/4" Manual 6-3/8" x 10-1/4" Automatic 8-1/4" x 17-3/16" Manual 8-1/4" x 17-3/16" Manual 8-1/4" x 13-7/8" Manual 8-1/4" x 13-7/8" Manual 8-1/4" x 14-13/16"

Wt. Lbs.

RETAIL

11 11 27 27 28 31 31

$ 320.26 322.94 905.84 896.46 850.90 1078.70 1141.68

* 1-phase motors are 115 volt, 3-phase are 208/230 volt ** Maximum flow rates will decrease with higher discharge pressure or heads. + Standard with Buna Seal.

EPPD-3AS1

Automatic Unit with Float

Dominator Stainless Steel Sewage Pumps. An excellent choice when effluents, sewage and larger solid handling is required. • Oil-lubricated double mechanical seals with Viton® elastomers • 2" Solids handling capability • Rated for continuous duty • 304 stainless with high quality corrosion-resistant materials • Permanent split capacitor motors good for 20 starts per hour • Built-in thermal protection on single phase models • ISO2548 Rating • 25' UL/CSA Water resistant cords • Manual or Automatic shut-off • Operates fully or partially submerged. The ideal choice for pumping industrial, agricultural or commercial waste water with suspended solids up to 2" diameter. Available in 1/2 hp through 2 hp sizes in single or three phase. Standard with 25' cords. Rated to 105° F. continuous or 140° F. intermittent duty. Ports are 2" FPT. AU64S

Automatic Unit with Float

Part No. *Motor **Max. Flow

Flowrate Shut-off @15’ Head Height Control

EA AU64S 1/2hp, 115v,1ph † 80 gpm @ 10' EA U64S 1/2hp, 115v,1ph † 80 gpm @ 10' EA AU675S 1hp, 115v,1ph 105 gpm @ 5' EA U675S 1hp, 115v,1ph 105 gpm @ 5' EA AU611S 1-1/2hp, 230v,1ph 135 gpm @ 5' EA U611S 1-1/2hp, 230v,1ph 135 gpm @ 5' EA U615-1 2hp, 230v,1ph 140 gpm @5' EA U615-3 2hp, 230v,3ph † 180 gpm @ 10' EA U615-4 2hp, 460v,3ph † 180 gpm @ 10' EA XPS5230 2hp, 230v,1ph 173 gpm @ 10’

45 GPM 45 GPM 52 GPM 52 GPM 82 GPM 82 GPM 108 GPM 160 GPM 160 GPM 155 GPM

20’ 20’ 21’ 21’ 26’ 26’ 33’ 46’ 46’ 55’

Dimensions (Dia. x H)

Automatic 9" x 21-5/8" Manual 9" x 21-5/8" Automatic 9" x 22-13/16" Manual 9" x 22-13/16" Automatic 9" x 20-1/4" Manual 9" x 20-1/4" Manual 9" x 24" Manual 9" x 24" Manual 9" x 20-1/4" Manual 9” x 24”

Wt.

RETAIL

36 lbs. $ 927.28 36 lbs. 901.82 41 lbs. 1143.02 41 lbs. 1122.92 45 lbs. 1219.40 45 lbs. 1195.28 52 lbs. 1401.64 45 lbs. 1179.20 45 lbs. 1179.20 52 lbs. 1417.72

*1-phase motors are 115 or 230 volt, 3-phase are 208/230 volt **Maximum flow rates will decrease with higher discharge pressure or heads. † You must run these pumps at 10’ discharge head or higher; shut off head is 20’.

Stainless Steel Sump Pumps Automatic Unit with Float

Goulds Sump Pumps for dirty water transfer or dewatering. Stainless steel motor housing, thermoplastic impeller and impeller casing for added corrosion resistance. Features: Single phase, 115 volt • Permanently lubricated motors for extended life and continuous operation • Available in manual or automatic versions with float switches• Maximum solids handling capacity is 3/8"• Discharge ports are 1-1/2" FPT • Buna Seals are standard • Maximum temperature is 104˚ F. LSP03 Models are 1/3 HP, single phase, 115 volt. Standard with 10' power cords. Rated to 2.8 amps. 6-1/8" Diameter x 9-1/2" H. Weight is 11 lbs. LSP07 Models are 3/4 HP, single phase, 115 volt. Standard with 20' power cords. Rated to 6.7 amps. 6-1/8" Diameter º x 11-1/4" H. Weight is 15 lbs. Flowrate Part No. Motor **Max. Flow @ 15’ Head Shut-Off GL LSP0311 1/3hp-115v 36 gpm @ 5' 20 GPM 20’ GL LSP0311AT 1/3hp-115v 36 gpm @ 5' 20 GPM 20’ GL LSP0711F 3/4hp-115v 57 gpm @ 10' 52 GPM 34’ GL LSP0711ATF 3/4hp-115v 57 gpm @ 10' 52 GPM 34’ ** Flow rates will decrease with higher discharge pressure or head.

Control Wt. RETAIL Manual 10 lbs. $ 259.96 Automatic 12 lbs. 310.88 Manual 16 lbs. 387.26 Automatic 17 lbs. 431.48

Viton® is a registered trademark of DuPont Performance Elastomers

IND

DULTMEIER SALES • OMAHA, NE

(800) 228-9666

•

www.dultmeier.com

• DAVENPORT, IA

(800) 553-6975

E0259

Submersible Sump Pumps

184

Specifically designed for Dewatering, Water Transfer, Sewage Systems or for any use where waste or drainage with up to 3" solids must be disposed of. Mechanical shaft seals with Buna elastomers are standard. Rated to 104° F. continuous or 140° F. intermittent duty. Pump casings are thermoplastic, stainless or cast iron as noted.

1DW Series - 1-1/2" 1DW Stainless Dewatering pumps for dirty water transfer. Handles solids up to 3/8". Impeller, shaft and casing are 304SS. Diffuser Plate is 304SS with a Polyurethane coating for added abrasion resistance. Manual design is standard but float switches can be ordered separately if required. Motors are 1 phase, 60Hz. 1/2 HP units are 115 volt. 3/4 HP and 1 HP are 230 volt only. Ports are 1-1/2" FPT. Silicon/Carbide mechanical seal with Buna elastomers is standard. Rated for continuous duty up to 120° F. Power cord is 20' long. Part No.

Motor

GL 1DW51COEA GL 1DW51D1EA GL 1DW51E1EA

1/2 hp 3/4 hp 1 hp

Flow Rate Shut-off Ht. Wt.

70 gpm @ 10' 85 gpm @ 10' 93 gpm @ 10'

36' 44' 52'

RETAIL

29 lbs. $ 892.44 32 lbs. 1029.12 38 lbs. 1080.04

1DW Series

WW Series - 2" WW Series pumps feature Thermoplastic casing, impeller and base. Motor housing is cast iron. Motors are 1/2 HP, 1 phase, 115 volt and are available with or without float switches. Power cord is 10' long. Handles solids up to 2" diameter. Outlet fitting is 2" FPT. Part No.

Motor

Flow Rate

Shut-off Ht. Wt.

GL WW0511 1/2 hp 63 gpm @ 10' 18' GL WW0511A * 1/2 hp 63 gpm @ 10' 18' * Standard with float switch for automatic shutoff.

RETAIL

WW Series D

22 lbs. $ 578.88 23 lbs. 644.54

Stainless Sewage Pumps - 1-1/2" & 2" 1DV & 2DV Series pumps feature 304SS Casing, impeller and shaft. All models are manual shut-off but float switches are available as an add-on. Power cords are 20' long. 1DV Models are 1/2 HP, 1-Phase, 115 volt. Will handle solids up to 1-3/8" diameter. Outlet is 1-1/2" FPT. 2DV Models are 3/4 HP and 1 HP, 1-Phase, 230 volt. Will handle solids up to 2" diameter. Outlet is 2" FPT. Part No.

Motor

GL 1DV51COVA GL 2DV51D1VA GL 2DV51E1VA

1/2 hp 50 gpm @ 10' 3/4 hp 75 gpm @ 10' 1 hp 110 gpm @ 10'

Flow Rate

Shut-off Ht. Wt.

26' 24' 33'

RETAIL

22 lbs. $ 1053.24 30 lbs. 1148.38 34 lbs. 1223.42

DV Series

WSO Series - 2" WSO Series pumps feature Cast iron casing and impeller, Silicon Carbide seal and stainless steel shaft. All models are manual shutoff but float switches are available as an add-on. Power cords are 20' length. Ports are 2" FPT. All pumps in this series will handle solids up to 2" diameter. 1/3 HP and 1/2 HP are 1-Phase, 115 volt. 3/4 HP & 1 HP motors are 1-Phase, 230 volt. Part No.

Motor

Flow Rate

GL WS0311B GL WS0511B GL WS0712B GL WS1012B

1/3 hp 80 gpm @ 10' 1/2 hp 120 gpm @ 10' 3/4 hp 150 gpm @ 10' 1 hp 180 gpm @ 10'

Shut-off

19' 25' 30' 38'

Wt.

RETAIL

70 lbs. $ 722.26 70 lbs. 897.80 77 lbs. 1227.44 86 lbs. 1344.02

WSO Series

WS Series - 3" & 4” WS15/20/30/50 Series pumps feature Cast Iron casing and impeller, Stainless steel shaft and fasteners, Silicon/Carbide seal and Buna elastomers. All models are manual shutoff. Handles solids up to 3" diameter. Power cords are 20' long. Ports are 3" flange for 150 lb. ANSI standard. Motors shown are 230 volt. (208 or 460 volt also available). Shut-off Wt. Part No. Motor Flow Rate Height Lbs. RETAIL GL WS1512D3 1.5hp-1ph 300 gpm @ 10' 38' 188 $ 3276.30 GL WS1532D3 1.5hp-3ph 300 gpm @ 10' 38' 185 3343.30 GL WS2012D3 2hp-1ph 350 gpm @ 10' 45' 193 3646.14 GL WS2032D3 2hp-3ph 350 gpm @ 10' 45' 190 3525.54 GL WS3012D3 3hp-1ph 400 gpm @ 15' 54' 205 4408.60 GL WS3032D3 3hp-3ph 400 gpm @ 15' 54' 195 3942.28 GL WS5012D3 5hp-1ph 450 gpm @15' 65' 210 3676.96 GL WS5032D3 5hp-3ph 450 gpm @15' 65' 200 4123.18 GL WS5012D4 *5hp-1ph 550 gpm @18’ 51’ 213 4986.14 GL WS5032D4 *5hp-3ph 550 gpm @18’ 51’ 210 4206.26 * 4” Models

IND

DULTMEIER SALES • OMAHA, NE

(800) 228-9666

•

WS Series

www.dultmeier.com

• DAVENPORT, IA

(800) 553-6975

E0258

DASH Tender System

185

DASH Tender System from Phiber The DASH Tender System from Phiber has two primary objectives: Keep the sprayer in the field spraying by drastically reducing fill times. Secondly, keep chemicals separated. The system is designed in a modular fashion which allows customers to pick and choose their own variations in order to better accommodate their specific operational needs. This is a volumetric system in the sense that there are no meters, scales, or other measuring devices involved to measure inputs. Chemicals are gravity fed into the poly cone inductors and the operator closes the chemical input valve once the desired graduation is met on each specific product inductor tank. Inductors can be supplied with a jug knife to further speed the process of hand-add jugs or bags of granular product. Furthermore, every inductor tank is automatically rinsed down after each unload. Thus, reducing the chances for cross chemical contamination. Pull handles allow the operator to completely load the sprayer from the ground. The three-inch transfer pump (engine driven) draws from the carrier tank. Once the operator is ready, they can open each desired product inductor to evacuate the tank. Since the inductors are plumbed on the suction side of the bulk transfer pump the product is drawn out, mixed in with the carrier agent, and then transferred to the sprayer. An air-powered diaphragm pump is used for jug rinsing, inductor rinsing, and getting dry chemicals into suspension. Furthermore, it allows the operator to hand spray and wash down inductors for easy cleanout.

Complete Dash Tender System from Phiber Note: Tanks & Trailers Are Not Included.

Models: • 4.0 DASH Rear Mount • 4.0 DASH Center Mount • 2.0 DASH Center Mount

Standard Equipment: • Two 65 Gallon Inductors • Two 30 Gallon Inductors • 13 HP Honda Engine with Electric Start Coupled to a Poly Hypro 3” Transfer Pump • Air Diaphragm Pump • 3” Plumbing

Optional Equipment: • • • • • •

Center Mount Tote Platform 5 ft. High Cage with Tote Platform 6 ft. High Cage with Tote Platform Boom Kit with Latch Premium Hose Kit for Boom Manifold Assembly 3 Tank Manifold Assembly with 3”, 4”, & 6” Fill Ports • 3” Deck Bulkhead • 3” Flow Meter • Jug Knife • Side step Assembly • Raised Work Platform • Trailer Part No. PI KIT400013 PI KIT400025 PI KIT400020 PI KIT400003 PI KIT400024 PI KIT400022 PI KIT400008

Center Mount Dash Closeup

Center Mount Dash

Description RETAIL 4.0 DASH Center Mount Base Unit (Gallon)......................... $ 25048.62 4.0 DASH Rear Mount Base Unit (Gallon)............................ 27231.48 2.0 DASH Base Unit.............................................................. 12419.12 Delivery Boom....................................................................... 2097.10 Cage Tote Platform, 5ft High................................................. 6531.16 Cage Tote Platform, 6ft High................................................. 7167.66 Center Mount DASH Tote Platform (4.0)............................... 2058.24

DULTMEIER SALES • OMAHA, NE

(800) 228-9666

•

www.dultmeier.com

• DAVENPORT, IA

(800) 553-6975

E1239

Praxidyn MixMate

186

Take the Fertilizer & Chemical Plant to the Field with Praxidyn MixMate Loading Systems Boost Productivity & Reduce the Amount of Chemical Exposure! Automated Loading & Record Keeping So You Know Exactly What Went in EVERY LOAD! How Much Is Loading By Hand Really Costing You?

MixMate Features: • Automated Record Keeping Saves Time in the Field and the Office • MixMate is Cloud Connected for Data Backup & Office Access • Factory Calibrated Scales and Flowmeters Rated at +/- 0.5% Error • Modular System Components, Easily Expanded with CAN Bus Connections • Spray Tender Trailer and Stationary Installations • Combine Weight and Flow Measurement Options for Speed and Versatility • Load a 1200 Gallon Sprayer in 4 to 5 Minutes with Accurate Records of What Went In Every Load

MixMate Pro Inductor: • All Stainless Steel • Measure Up to 6 Bulk Products by Weight • Most Unique Jug Rinse in the Industry • Drain, Weigh, Record and Rinse a Jug in 12 Seconds

MixMate Fusion • Best MixMate Features, Compact and Economical • 3 Optional Bulk Inputs Measured by Weight • Inductor Measurements by Weight PX K3

• Most Unique Jug Rinse in the Industry • Drain, Weigh, Record and Rinse a Jug - 12 Seconds

PX K2A

• High Flow Rate Rinsing System for Dry Products

MixMate Flow - Single & Stack • Automated Mixing and Record Keeping for Bulk Products • Compact Footprint to Save Trailer Space • Excellent Companion Product for Traditional Inductors

PX K46

• Compare the MixMate Flow Stack with Other Systems and You Will Find We Have the Advantages of Speed, Automated Mixing, Automated Records; All While Being Competitively Priced

Call For System Pricing! DULTMEIER SALES • OMAHA, NE

(800) 228-9666

•

www.dultmeier.com

• DAVENPORT, IA

(800) 553-6975

E1240

Praxidyn Total Plant Manager

187

A Great System for Ag Retail, Aerial Spraying & On Farm Plants ! Maximize the Speed, Accuracy & Record Keeping of Your Fertilizer & Chemical Plant Legal for Resale Systems Available!

Turn Your Existing Operation Into A Fully Automated Fertilizer & Chemical Plant • Automated Record Keeping Saves Time in the Field, the Plant and the Office • Combine Weight & Flow Measurement Options for Speed & Versatility • Great System for Processing Jugs & Dry Additives • Mixmate is Cloud Connected for Data Backup & Office Access • Modular System Components, Easily Expanded with CAN Bus Connections • Serviced & Supported by Dultmeier Sales Teams in Omaha, NE and Davenport, IA

PX MIXMATE

Mass Meter Options

Call Us for System Pricing!

Software. . .

Intersect The connection from the field to the office.

Data Backup Data is backed up whenever an internet connection is available and new data is present. We want MixMate to be as easy and reliable as possible to use so we made the backups automatic. If your tablet or phone fails or is lost, just load the app on your new device and register the app.

Data Synchronization Data is synchronized between the devices in the field and the Intersect cloud service. Every Android smartphone or tablet running the MixMate app has the information about the inventory and assets of your business. Jobs can be assigned to specific devices, users or be seen by everyone in your group.

Easily Create Work Orders Work orders or jobs in the system simplify the mixing process in the field. When a job is created in Intersect, it shows in the job list in the MixMate app. When a job is selected in the app, it populates the details for the mixing operation.

Notifications and Reports Intersect can automatically send reports or notifications to a landowner, grower or agronomist. When a job has completed, the reports and notifications are triggered. It can be as simple as notification that the job is complete or a full report including the amount of products used on the job.

Data Sharing and Integration The system was designed from the start to offer a connection to third party software systems. Data is collected automatically as you work in the field. Intersect offers a similar experience in the office to pass data directly through an API connection to other record keeping systems. This eliminates manual data entry that is prone to error.

Data Security Our sharing system gives you full control over the data that a business partner can see. Share the data for a farm with the landowner. An agronomist can share a prescription with a grower. Jobs can be shared with commercial applicators. These are just some examples of the possibilities. We take data security seriously and will not share your data. DULTMEIER SALES • OMAHA, NE

(800) 228-9666

•

www.dultmeier.com

• DAVENPORT, IA

(800) 553-6975

E1241

Chemical Pumps & Transfer Systems

188

DURA-ABV™ & BANJO EVX Auto Batch Meter with Valve

DURA-ABS™ Auto-Batch System - Direct Injection The Dura Auto-Batch System DI (Automated Direct Injection) works by direct injecting herbicides automatically into the sprayer carrier while filling the sprayer tank. Automated DI (Direct Injection) • Filling your sprayer has never been easier or faster • Check valves eliminate potential of herbicide backflow • Accurately dispenses repeatable batches within 0.5% in ounces, gallons or liters • Eliminates cross contamination • Eliminates herbicide exposure and operator error • Eliminates rinsing and wasting of chemical • 3-Way valve provides for easy calibration and provides ability to plumb for recirculation of herbicide tank • No data recording; not legal for direct resale

- Pump Not Included -

• Flow Rate: 2 to 22 GPM & Maximum Pressure: 40 PSI • Meter Accuracy is ± 0.5% • Backlit LCD Display • Powered By (4) “AAA” Batteries • Wetted Materials: Polypropylene, 304 Stainless Steel, Ryton, EPDM, Viton® or Silicone Seals • Moisture Sealed

• Amount Metered & Batch Count • Units Measured is Gallons, Liters or Ounces • Calibration: Quick List or Manual • Dimensions: 5-1/4” W x 5-1/4” H x 4-1/4” D • Operating Temperature is -10° F. to +130° F. • Weight is 1.5 lbs.

Part No. DP DURA-ABV-B Dura ABV Auto BatchPreset Meter for 12V Control Valve..... TK MEVX100B 1” Flanged 12V Banjo Valve with 18” Cable & 3 Pin Weather Pack Connector............................................. DU ABV-MEVX-1 1” Plumbing Kit, Flanged.............................................

Inductor, Inductor Tank & Large Pump Sold Separately Part No. DP ABS-DI2-4312 DP ABS-DI2-4315 DP ABS-DI3-4312 DP ABS-DI3-4315

2” Plumbed, 12 Volt...................... 2” Plumbed, 110 Volt.................... 3” Plumbed, 12 Volt...................... 3” Plumbed, 110 Volt....................

Features: • Input Meters (Viton®): (4) Chemical • Input Pumps: (4) Ag Chemical 15 GPM Dura-Pumps (Viton®) • Inductor Valves: Electric - For Rapid Induction of Product Into Main Carrier Line with Simple Flip of Switch • Operator Panel: (4) Digital AutoBatch Systems (Dura-ABS) • Tanks: (3) Stainless Steel; 70, 30 & 15 Gallon • Output Pump: 3” Electric Banjo Wet Seal Honda Motor

For Plant Protection Products Greenleaf’s EasyFlow is the first closed, contamination-avoiding and self-cleaning transfer system for chemical protection of sealed or non-sealed small containers. This system enables the user to do partial or complete dosing. Features: No-spill connection • Builtin backflow prevention • Continuously adjustable flow rates – enables exact transfer of partial container volumes • Container Adapter fits most chemical containers (63mm) • Easy installation on all sprayer tanks and most chemical induction tanks • Gravity flow – no pump needed • Built in rinsing nozzle flushes connection and cleans spent chemical container. Use your QR Code Reader to see a video of the EasyFlow in use.

• Ability to Load a 1,000 Gallon Sprayer with Up to (4) Chemicals In 5 Minutes • Reduces Typical Spray Load Time By 75% • Payback is Approximately 20-25 Spraying Days (For Custom Applicator) • Powder-Coated Steel Frame (Forkliftable) • 6’ Water Flush Hose (X Ft.) With Spray Nozzle • All Hose Clamps, Barbs & Nipples • Not Legal for Direct Resale

Part No. GT EF0376 Easy Flow Kit. (1) Tank Adapter (GTEFTA55) & (3) Container Adapters (GTEFJA64)......... Call GT EFBA02 Easy Flow Kit. (1) Tank Adapter (GTEFTA55)... For & (2) Container Adapters (GTEFJA64)......... Current GT EFTA55 Easy Flow Tank Adapter.................................. Pricing GT EFJA64 Easy Flow Container Adapter.......................... GT EFWP71 Optional Easy Flow Wedge Plate Kit, (2) Wedge Plates & (2) Seals............................. Part No. Repair Items & Adapters RETAIL GT EFJA64T Hose Barb Adapter for Bulk Transfer................ $ 103.18 GT EFJS33 Jug Seal for Container Adapters....................... 1.89

DULTMEIER SALES • OMAHA, NE

365.82 8.98

Dura-Load Station

CALL for Current Pricing

Self-Cleaning Close Transfer System

Download Here

RETAIL $ 818.74

(800) 228-9666

•

Dura Load Station Dimensions 5’3” Wide 3’5” Deep

5’ Tall

Part No. DP LS-ABS Dura-Load Station Complete, Viton®............................ DP LS-ABS-LP Dura-Load Station Less 3” Discharge Pump, Viton®.... DP LS-ABS-E Dura-Load Station Less 3” Discharge Pump, EPDM.....

www.dultmeier.com

• DAVENPORT, IA

(800) 553-6975

CALL for PRICING

E1086

Chemical Pumps DD6 Pump/Motor The DD6 Diaphragm Pump is designed to mount directly into the mini-bulk container. The DD6 will pump low to high viscosity liquids. The discharge port configuration features a check valve to prevent chemical container leakage as the motor discharge hose is designed to break away in the event of an accident. This pump includes a manual vent, rain cover, mounting hardware and gasket. The flow rate is 7 to 9 GPM. Recirculates when hose end valve is shut off. The DD6 Motor is the drive unit for the DD6 pump. It is powered by a 12 volt DC U.L. listed electric motor. It comes with the electrical hardware. Elbow discharge kits not DD6 included. Motor

189

BC6 Pump & Motor BC6 Pump

DD6 Pump

D D

KD2301 Elbow Kit, 1" FPT D

KD23AC Elbow Kit, 1" Male Adapter (camlock)

DD6 Motor

Part No. Wt. RETAIL SI DD6PUMP DD6 Pump Module Only LESS MOTOR............... 4 lbs. $ 308.20 SI DD6MOTOR 12 Volt Motor Only for DD6 or BC6 Pump.......... 12 lbs. 373.86 SI KD23AC Elbow Kit with Male QC Adapter.......................... - 120.60 SI KD2301 Elbow Kit with 1" FPT.......................................... - 125.29 SI DD6M-100 Viton® O-Ring (Smaller) for Elbows........................ - 2.95 SI EP-37 Viton® O-Ring (Larger) for Elbows.......................... - 10.59 SI DD6M-105 Spacer for Elbows............................................... - 5.63 SI XTUBE-E 1” Adjustable Suction Tube with Flex Conn. & Clamps* - 30.55 SI KD04200 34" Suction Tube with Flex Connection & Clamps.... - 36.18 SI RKDD6 Repair Kit for DD6 Pump.................................... - 133.33 SI SPAN Spin Collar for GEM Cap Tanks .......................... - 42.88 SI SPA700G Gasket for Spin Collar......................................... - 46.90 * Adjusts from 28” - 48”.

Complete DD6 Kits

The BC6 Diaphragm Pump looks similar and functions identically to the DD6 pump but it is designed to fit directly onto ICB containers (mini-bulks) which have 6.5” diameter nominal (6 7/16” diameter actual) tank openings. The BC6 pump will pump low to high viscosity liquids. Flow rate is 7-9 GPM. The BC6 pump will work with the DD6 motor. BC6 Pump includes 1” poly discharge elbow & 1” adjustable suction tube.

1A100 Kit

BC6 Mounted On 275 Gallon Square Tank Part No. Wt. RETAIL SI BC6PUMP BC6 Pump Module Only LESS MOTOR............ 4 lbs. $ 288.10 SI DD6MOTOR 12 Volt Motor Only for DD6 or BC6 Pump....... 12 lbs. 373.86 SI XTUBE-E Replacement Adjustable Suction Tube *.......... - 30.55 * Adjusts from 28” - 48”.

1A100 Drive Package includes the DD6 motor, SEM-10 electronic flow meters, discharge elbow (KD2301; 1” FPT), and a 1” x 12”, 2-braid, 4-ply EPDM discharge hose assemblies with nozzle valve. 1A101 adds DD6 pump. Suction tube is extra. Part No.

Wt.

Complete BC6 Kits

RETAIL

SI 1A100 DD6 Kit Less Pump 24 lbs. $ 809.36 SI 1A101 DD6 Kit With Pump 28 lbs. 1113.54 SI KD04200 34" Suction Tube Non-Adjustable Assembly............ 36.18 SI XTUBE-E 1” Adjustable Suction Tube with Flex Conn. & Clamps*....... * Adjusts from 28” - 48”.

30.55 D

Air Piston Pump

A versatile, durable and reliable pump for use with lubricants, diesel fuel, gasoline, crop oil and anti-freeze. The AP30 is a double action piston air pump that works on 1/3:1 ratio. The wettable parts on the AP30 are constructed of stainless steel, aluminum and Buna seals. Included in this package is a 2-piece polyethylene 1" diameter suction tube, and a 2" NPT bung adapter. It operates within an air pressure range of 50 to 125 PSI. Maximum air consumption is 9 cfm to deliver 30 GPM or 113 LPM. Not for AgChemicals.

1A102 Drive Package includes the BC6 pump, DD6 motor (DD6 motor works with either the DD6 pump or BC6 pump), plastic discharge elbow and 1” x 12”, 2-braid, 4-ply EPDM discharge hose assembly with nozzle valve. 1A102A is the same kit with SI SEM10FTE meter (hose end style) included. 1A103 is same kit but less motor and meter. Adjustable suction tube (28” to 48”) is included in all kits. Part No.

Wt.

SI 1A102 BC6 Kit Complete Less Meter SI 1A102A BC6 Kit Complete with Part No. Description Wt. RETAIL SI AP30 Air Pump 18 lbs. $ 936.66 SEM10FTE Meter................... SI RKAP30 Repair Kit - 176.88 SI 1A103 BC6 Kit Less Motor & Meter... Viton® is a registered trademark of DuPont Performance Elastomers

DULTMEIER SALES • OMAHA, NE

(800) 228-9666

•

www.dultmeier.com

• DAVENPORT, IA

RETAIL

24 lbs.

$ 739.68

26 lbs. 12 lbs.

978.20 368.50

(800) 553-6975

E0271

190

Chemical Pumps Cage Tank Pump Systems

GPI 12-Volt & 110-Volt AgChemical Pumps

Designed for

P120H - 12 GPM Rotary Gear pump for thin fluids (0 to 10 CPS.)

Herbicides, Pesticides, Fertilizers, Mild Acids,

P200H - 8 GPM Rotary Gear pump for medium thick fluids (10-450 CPS.)

Soaps & Water

Series P120H & P200H PUMPS Feature:

2" Connection is standard. Available with 4" Connection & recirculation feature

• Lightweight, durable, molded plastic housing for chemical resistance • 12-Volt DC motors with low amp draw of 15 to 25 amps under normal operating conditions • 30-minute “Duty Cycle” with non-viscous fluid. Features: Flow rate of 13 GPM • 10’ Suction lift • 12VDC or 120 VAC electric thermal overload protected motor • Santoprene® double diaphragm glassfilled polypropylene housing with EPDM seals. Includes: 12V model includes a 20’ Battery cable with clips and 30 amp fuse • 120V Model includes a 6’ 18AWG by 3-conductor cord with plug • IBC bracket with handle • Bottom tote connection fittings: 1” NPT street elbow, 1” ball valve, 2” to 1” reducing bushing, 2” female coupler with female threads - all poly construction • EPDM hoses: 1” x 39” (suction) and 1” x 12’ (discharge) • (2) 90° flanges on pump for both inlet and outlet • 1” Nozzle valve anti-drip spout, less meter • Two Year Warranty. Part No. RETAIL FR 425B 12-Volt Cage Tank Pump System Less Meter $ 1201.98 FR 470B 115-Volt Cage Tank Pump System Less Meter 1201.98

DULTMEIER SALES • OMAHA, NE

(800) 228-9666

•

Optional 111502-2 Herbicide Kit Includes: 1" x 12' EPDM hose, 1" Ball Valve Nozzle, 22-40" telescoping suction pipe and hardware.

Part No. Wt. RETAIL GI P120H 12-Volt DC Plastic Gear Pump for thin fluids. Includes 15' battery cable, clips, bung adapter, & hardware. Fits 2" bung............... 15 lbs. $ 664.64 GI P200H 12-Volt DC Plastic Gear Pump with gear reduction for medium fluids. Includes 15' battery cable, clips, bung adapter, and hardware. Fits 2" bung................................ 15 lbs. 770.50 NOTE: GPM will vary with liquid viscosity, temperature and inlet selection.

www.dultmeier.com

• DAVENPORT, IA

(800) 553-6975

E1268

FlowServe

191

Backed by 5-Year Service Program for Pumps Shown Below

CT6 AgChemical Pump Kits

EPDM vs. Viton® Seals • Many Agchemical Manufacturers recommend EPDM seals for most of their products. • Also use EPDM pump seals for Roundup™, Glyphosate, Dicamba, Lumax™, Lexar™, Callisto™ & Halex GT™. • Use Viton® pump seals for petroleum-solvent based products, nitrogen based products and N-Serve™. • You should also check Manufacturer’s Product Data Sheets for guidance on compatible seals.

for Cage Tanks These high flow diaphragm pumps are designed to transfer agchemicals at up to 13-14 GPM. CT6 Kits Include: CT6 pump with bracket to secure to cage tanks, suction hose with 2” female camlock, discharge hose, SEM10FT or SEM10FTE hose end meter and nozzle valve. 12V Units include 20’ cord with inline fuse and switch. 115 Volt motors include 6’ cord/plug.

CT6 Basic Kits These CT6 Diaphragm Pumps are designed to transfer agchemicals at up to 13-14 GPM. High Flow (HF) Pumps provide 17-18 GPM. 12 Volt units have 20’, 10 gauge cord with 30 amp inline fuse and switch. (6’ Cord on 115 volt units).

CT6-PO D

Part No. SI CT6-PO-E SI CT6-PO-V SI CT6HF-PO-E SI CT6-POK-E SI CT6-PO115-E SI CT6-PO115-V

Part No. SI CT6-M-E SI CT6-M-V SI CT6-M-115-E SI CT6-M-115-V SI CT6-LM-E SI CT6-LM-115-E

Description RETAIL CT6 Pump/Meter Kit for Cage Tank, 12 Volt, EPDM................ $ 802.66 CT6 Pump/Meter Kit for Cage Tank, 12 Volt, Viton®.............. 883.06 CT6 Pump/Meter Kit for Cage Tank, 115 Volt, EPDM.............. 936.66 CT6 Pump/Meter Kit for Cage Tank, 115 Volt, Viton®............ 990.26 CT6 Pump/Plbing Kit for Cage Tank (Less Meter), 12V, EPDM............ 655.26 CT6 Pump/Plbing Kit for Cage Tank (Less Meter), 115V, EPDM.......... 675.36

CT6HF High Flow AgChemical Pump Kits

Description RETAIL CT6 PUMP WITH, 12 Volt, Suction Tube & Bung Adapter, EPDM $ 467.66 CT6 PUMP WITH, 12 Volt with Suction Tube & Bung Adapter, Viton® 507.86 CT6 HIGH FLOW PUMP WITH, 12-Volt with Suction Tube & Bung Adapter, EPDM 534.66 CT6 Pump, 12 Volt with 12’ Hose, Nozzle Valve/Spout, Suction Tube & Bung Adapter, EPDM 570.84 CT6 PUMP ONLY, 115 Volt Less Suction Tube, EPDM 494.46 CT6 PUMP ONLY, 115 Volt Less Suction Tube, Viton® 534.66

for Cage Tanks These extra high flow pumps are designed to transfer agchemicals at up to 17-18 GPM (without meter). Viton® or EPDM seals. CT6 HF Kits Include: CT6HF pump with bracket to secure to cage tanks, suction hose with 2” female camlock, 1” x 12’ discharge hose, SEM10FT or SEM10FTE meter and nozzle valve. 12 Volt units have 20’, 10 gauge cord with 30 amp inline fuse and switch. (6’ Cord on 115 volt units)

CT6-CES Kits These CT6 High Flow Kits are designed to mount to the top of the mini-bulk tanks and include tank adapter (noted below), SEM10 meter, discharge hose and ball valve nozzle. 17-18 GPM.EPDM seals. Suction Tube is extra.

CES-CT6HF Part No. SI CT6HF-E SI CT6HF-V SI CT6HF-LM-E

CT6 AgChemical Caddy Kits Caddy Versions include the same features as above and are enclosed in a convenient carrying frame, with SEM10 meter, 1” x 12’ discharge hose and ball valve nozzle. Viton® or EPDM seals.

Part No. Description Wt. RETAIL SI CES-CT6HF-E CT6HF Pump, 12 Volt with SEM-10 Meter, Hose & Nozzle & 2” x 1” Suction Elbow, EPDM............ 28 lbs. 802.66 SI CES-CT6HF-G-E CT6HF Pump, 12 Volt with SEM10 Meter, Hose & Nozzle w/GEM Cap Adapter, EPDM 25 lbs. 856.26 SI CES-CT6HF-G-V Same As Above with Viton®............. 25 lbs. 896.46 SI CES-MTS-HF * CT6HF Pump, 12 Volt with SEM-10 Meter, Hose & Nozzle for Monsanto M.B. Tanks, EPDM 28 lbs. 883.06 SI XTUBE-E 1” x 34” Suction Tube....................... - 30.55 * For Monsanto Keylock Tanks Only. Part No. SI CT6KIT-203 SI CT6KIT-207 SI CT6KIT-301 SI CT6KIT-302 SI CT6KIT-304 SI CT6KIT-305 SI CT6KIT-601 SI CT6KIT-602 SI CT6KIT-101 SI CT6KIT-102 SI CT6KIT-104

Description RETAIL CT6HF Cage Tank Pumper Kit, 12 Volt, EPDM.......... $ 869.66 CT6HF Cage Tank Pump/Meter Kit, 12 Volt, Viton®... 936.66 CT6HF Cage Tank Pump Kit, 12 Volt, LESS Meter, EPDM.. 635.16

Kits RETAIL Housing Kit F/CT6/CT6HF with EPDM................... $ 76.38 Housing Kit F/CT6/CT6HF Viton®.......................... 99.83 Valve Plate Assembly, CT6, EPDM......................... 86.43 Valve Plate Assembly, CT6, Viton®........................ 101.84 Valve Plate Assembly for CT6HF, EPDM................ 97.82 Valve Plate Assembly for CT6HF, Viton®................ 113.23 Wobble Plate Assembly/Diaphragm Kit for CT6...... 84.42 Wobble Plate Assembly/Diaphragm Kit for CT6HF. 97.82 12 Volt Motor (Standard Flow) for CT6 Pump......... 320.26 12 Volt Motor (High Flow) for CT6HF Pump............ 375.20 115 Volt Motor for CT6 Pump.................................. 375.20

CT6-CAD-115 Part No. Description RETAIL SI CT6-CAD-E CT6 Caddy System, 12 Volt, EPDM........................ $ 909.86 SI CT6-CAD-V CT6 Caddy System, 12 Volt, Viton®........................ 1003.66 SI CT6-CAD-115-E CT6 Caddy System, 115 Volt, EPDM...................... 990.26 SI CT6-CAD-115-V CT6 Caddy System, 115 Volt, Viton®...................... 1084.06 SI CT6HF-CAD-E CT6 “High Flow” Caddy System, 12 Volt, EPDM... 1003.66

Viton® is a registered trademark of DuPont Performance Elastomers

DULTMEIER SALES • OMAHA, NE

(800) 228-9666

•

www.dultmeier.com

• DAVENPORT, IA

(800) 553-6975

E0272

Chemical Pumps

192

SOTERA 400B Series Diaphragm Pumps have proven to be a winner on all types of hard to handle agricultural chemicals. The double acting diaphragm design will work well with viscous, corrosive, encapsulated, suspension and shear sensitive products. These self priming pumps operate well on cold mornings and can even run dry without damage. These pumps have a 5-year Warranty. Working parts run in oil. Wetted parts are polypropylene, santoprene and stainless steel. The 1/4 HP motor will flow 13 GPM on 12-volt and 16 GPM on 110-volt models. Easily adapted to all mini-bulks with various adapters (see below).

445 Mini-Bulk Pump/Meter System with Recirculation Use for chemicals requiring recirculation. 12 volt pump includes Sotera’s 825 meter, 12’ EPDM hose with nozzle valve & adjustable suction pipe. GEM cap adapter (8-1/4” coarse thread) built into the pump base.

445 is fitted with Viton® seals for most chemicals. 445X700 is fitted with EPDM seals for Lumax and Lexar.™ Part No.

Wt.

RETAIL

FR 445 12V Recirc. Pump/Meter Unit. 31 lbs. $ 1203.32 FR 445X700 Same-fitted with EPDM.......... 31 lbs. 1207.34

415/417/460 Models Polypropylene Diaphragm Pumps for 2” tank ports. 417 & 460 include 1” x 12’ EPDM hose, ball valve nozzle and spout, telescoping polypropylene 24-40” suction pipe, 20’ battery cable and 2” bung adapter.

Tote & Go Pump Kits Use For: Agchemicals • Fertilizers • Seed Treatment Liquids • Propionic Acid (Hay Treatment) • Anti-Freeze • Motor Oil • Waste Oil (with Inlet Screen) • Hydraulic Fluid • Transmission Fluid • Soaps & Cleaning Fluids • Deicing Liquids These versions of the Sotera 400B series diaphragm pump offer maximum flexibility. The motor support bracket allows the unit to set level on the ground or atop a mini-bulk tank. Pumps thin liquids at 15GPM (to 1.5 CPS) or thick liquids D to 12 GPM (to 350 CPS). Glass-filled polypropylene body, internals include polypropylene, fluorocarbon Pump Only & stainless steel for maximum Hoses & fittings chemical resistance. 2” not shown Camlock inlet and 1” FPT outlet. Available in 12V or 115V pumps & pump kits (kits include 1 x 36” suction hose with clamps & poly fittings, 2” poly camlock coupler & 2” x 1” reducer and 1” x 12’ EPDM discharge hose with nozzle valve. Suction tube also included). Part No. FR 415X731 FR 415X731PG FR 460X731 FR 460X731PG FR F1855

Model 417

FR417 includes swivel base adapts to both 2" NPT & 2" buttress threads.

SF1100 AgChemical Pumps

FR415 & 460 include 2” MPT inlet. Part No.

Wt.

Description Amp Draw Wt. RETAIL 12 Volt Pump Only 12.0 35 lbs. $ 716.90 12 Volt Pump Kit 12.0 38 lbs. 903.16 115 Volt Pump Only 2.0 35 lbs. 720.92 115 Volt Pump Kit 2.0 38 lbs. 908.52 1” Telescoping Suction Tube...................... 30.15

RETAIL

Engineered to pump thin or thick agchemicals. Can be used for DEF. 10 GPM with water; 7 GPM on agchemicals at 70° F. or 4.5 GPM on cold or viscous liquids (860 CPS). Glass-filled polypropylene body with unique design bonds the polypropylene pistons to the santoprene diaphragm (comolded). Oversized 3” magnet motor. Can be serviced with hand tools only.

FR 415 12-Volt Pump Unit Less Hose/Meter 32 lbs. $ 783.90 FR 417 12-Volt Pump Unit Less Meter........ 35 lbs. 834.82 FR 460 115-Volt Pump Unit Less Meter....... 32 lbs. 896.46 FR 825 1" Digital Meter................................ - 263.98 FR F6863 Repair Kit for 2008 & Earlier Models (400/400A) 301.50 FR 400KTH1457 Repair Kit for 2009 & Later Models (400B) 304.18

SF1100 & SF1105 have 2” MPT inlet (pump only, less adapter, suction tube, hose & nozzle valve).

435/465 Models

SF1100PTS is a complete unit. Includes SF1100 12 volt pump and FM1100 pump mounted meter D that is mounted in a portable frame, 20’ of cable with clips and fuse, 1” x 12’ EPDM discharge hose with ball valve and spout plus a 1” x 12’ inlet hose with ball valve, elbow and cam coupling.

ChemTraveller™ - Portable Pumping Systems These models are portable self-contained units packaged in a rugged steel frame that is easily moved. Both models include a 1" x 14' EPDM discharge hose with camlock, 1" x 9' EPDM suction hose, ball valve nozzle and 825 digital meter. Note: Compatible with N-Serve. 435 D

SF1100PTS

SF1100PI the same as the SF1100PTS but with an inline meter.

Part No. Description Wt. SU SF1100 12-Volt Pump only, EPDM........................................... 11 lbs. SU SF1100-110V 110-Volt Pump only, EPDM......................................... 11 lbs. SU SF1105 12-Volt Pump only, Viton®........................................... 11 lbs. SU SF1100PTS ShurFlo 12V Ag Runner Pump/Meter, EPDM.......... 42 lbs. SU SF1100PI Same as 1100PTS with Hose End Meter................. 42 lbs. SU SF1105PTS ShurFlo 12V Ag Runner Pump/Meter, Viton®.......... 42 lbs. SU 94-718 Replacement Motor Assy with Switch & Cable ....... 6 lbs. SU 94-719-00 Diaphragm & Lower Housing Kit................................ 1 lbs. SU 94-720-00 Poly/Viton® Valve Assembly....................................... 1 lbs. SU 94-720-5 Viton® Valve Housing Kit (Assembled)...................... 1 lbs. SU 94-721-00 Upper Pump Housing Kit............................................ 1 lbs. SI PH25 2” MPT x 2” FPT x 1” FPT Poly Adapter.................... - FR F1855 Poly Adjustable Suction Tube (23”-41”)...................... -

435 is 12-volt and includes 20 ft. battery cables. 465X713 is 115-volt, LESS meter (FR825) and includes (2) wheels. Part No.

ChemTraveller™

Wt.

RETAIL

FR 435 12-Volt Unit..................................... 50 lbs. $ 1478.02 FR 435X700 12-Volt Unit, EPDM Internals.......... 50 lbs. 1073.00 FR 435X713 12-Volt Less Meter.......................... 48 lbs. 1240.84 FR 465X713 115-Volt Unit Less Meter ............... 48 lbs. 1364.12 FR F6863 Repair Kit for 2008 & Earlier Models (400/400A). 301.50 FR 400KTH1457. Repair Kit for 2009 & Later Models (400B). 304.18 DULTMEIER SALES • OMAHA, NE

(800) 228-9666

RETAIL $ 529.30 594.96 548.06 1321.24 1294.44 1323.92 201.00 83.75 81.07 107.20 76.38 46.90 30.15

Viton® is a registered trademark of DuPont Performance Elastomers

•

www.dultmeier.com

• DAVENPORT, IA

(800) 553-6975

E0273

AG Chemical Pump Systems Dura-Pump™

Dura-Pump™ Easy Caddy Systems

FEATURES: High Flow: Up to 15 GPM open flow rate • Self-Priming diaphragm pump with internal bypass D (suction lift to 10’) • 12 Volt Model includes 20’ cord; 115 Volt Model includes 6.5’ cord • 1/4 HP Motor draws 8.5 amps (12V) or 2.0 amps (115V) • Motor thermally protected from overheating & 30 minute duty cycle • Suction Port has 2” Male NPT & 1” Female NPT; Internal check valve is EPA 165.45 compliant • Pump is easily field serviceable • Features 2 Year Warranty. Suction tube is extra - see below. Part No.

DP 4012E DP 4015E DP 4012S DP 4012V DP 4015V DP 4015S DP T4001 DP P4017A-E DP P4017AV DP H4001A-E DP H4001A-V

Description

193

RETAIL

12 Volt Pump Only, EPDM................................ $ 619.08 115 Volt Pump Only, EPDM.............................. 710.20 12 Volt Pump Only, Silicon................................ 663.30 12 Volt Pump Only, Viton®............................... 659.28 115 Volt Pump Only, Viton®............................. 732.98 115 Volt Pump Only, Silicon.............................. 699.48 1” Telescoping Suction Tube............................. 33.10 Pump Cartridge, O-Ring, Bottom Gasket Kit, EPDM. 152.43 Pump Cartridge, O-Ring, Bottom Gasket Kit, Viton® 165.83 Pump Bottom Housing, Gaskets, Screws Kit, EPDM 90.45 Pump Bottom Housing, Gaskets, Screws Kit, Viton® 102.51

* Use Silicon Models for Resicore®, Instinct®, Keystone®, Enlist Duo®, Garlon3A®,Surpass EC®, Surestart®, Duramax®, Durango, Accord.

FEATURES: Can be mounted in (6) different configurations on a variety of tank/tote and drum types • Use it mounted on top of tank or top of 55 gallon drum, on side of cage tank or off the ground depending on user preference • 1” x 5’ Suction hose & 1” x 12’ Discharge hose with ball valve nozzle • Polypropylene fittings & 2” camlock for cage tank bottom port suction • Optional meter is DP 3000E or DP 3000V • Features 2 Year Warranty.

Shown with Optional Meter

Part No.

Description

DP E4012E DP E4012V DP E4015S DP E4012S DP E4015E DP E4015V DP EM4312S DP 3000E DP 3000V DP 3000S DP NF4002 DP AK0007

Easy Caddy, 12 Volt, EPDM, Less Meter....... Easy Caddy, 12 Volt, Viton®, Less Meter....... Easy Caddy, 115 Volt, Silicon, Less Meter..... Easy Caddy, 12 Volt, Silicon, Less Meter....... Easy Caddy, 115 Volt, EPDM, Less Meter..... Easy Caddy, 115 Volt, Viton®, Less Meter..... Easy Caddy, 12 Volt, Silicon*, With Meter...... 1” Dura Meter, EPDM..................................... 1” Dura Meter, Viton®.................................... 1” Dura Meter, Silicon.................................... Replacement 1” Ball Valve/Nozzle................. Recirculation Kit.............................................

RETAIL

$ 793.28 848.22 955.42 848.22 901.82 928.62 1208.68 349.74 357.78 360.46 28.41 106.53

* Use Silicon Models for Resicore®, Instinct®, Keystone®, Enlist Duo®, Garlon3A®, Surpass EC®, Surestart®, Duramax®, Durango, Accord.

“MTS” Top Mount Systems

Dura-Pump™ Quick Caddy Systems Shown with Optional Meter

• A Premium highly portable system with built-in carry handle & rugged frame (12V or 115V Pump) • For use in multiple mounting applications both on top of tote & ground adaptable • 1” x 5’ Suction hose & 1” x 12’ discharge hose with ball valve nozzle • Optional Meter is DP 3000E or DP 3000V • Features 2 Year Warranty

• For use with Monsanto “MTS” Tanks • 1” x 12’ Discharge Hose with ball valve nozzle & MTS tank coupler • Rear motor support bracket • Optional Meter is DP 3000E or DP 3000V • “GEM” Cap Versions Also Available • Features 2 Year Warranty

Part No.

Description

RETAIL

DP MTS-4012E MTS System, 12 Volt, EPDM........ $ 779.88 DP MTS-4012V MTS System, 12 Volt, Viton®........ 821.42

Dura™ Auto Batch Systems Finally An Economical Transfer System Offering An Automated Dispensing Option! • HOW IT WORKS: Simply select the volume desired, Press Start, and the pump will begin to dispense fluid and automatically shuts off when target is reached. • The intuitive interface allows for the selection of manual or automatic operation with the flip of a switch. Stores up to five (5) different calibration setting • High-flow pump with up to 15 GPM flow rate. • Includes 15 GPM Pump, Dura™ Meter with ABS pre-set installed, 1” x 5’ suction hose, 1” x 12’ discharge hose, 2” camlock and ball valve nozzle. • Optimized for repeatable batching returns to the last volume amount dispensed.

Description

DP Q4012E DP Q4012V DP QM4312S DP Q4015E DP Q4015V DP 3000E DP 3000V

Quick Caddy, 12 Volt, EPDM, Less Meter....... $ 875.02 Quick Caddy, 12 Volt, Viton®, Less Meter...... 942.02 Quick Caddy, 12 Volt, Silicon, With Meter....... 1291.76 Quick Caddy, 115 Volt, EPDM, Less Meter..... 940.68 Quick Caddy, 115 Volt, Viton®, Less Meter.... 995.62 1” Dura Meter, EPDM...................................... 349.74 1” Dura Meter, Viton®..................................... 357.78

RETAIL

* Use Silicon Models for Resicore®, Instinct®, Keystone®, Enlist Duo®, Garlon3A®, Surpass EC®, Surestart®, Duramax®, Durango, Accord.

Dura-Pump™ Top Unload Systems

Part No.

Description

DP ABS-4312E DP ABS-4312V DP ABS-4312S DP ABS-EX10 DP ABS-4315E DP ABS-4315V DP ABS-4315S

Auto Batch, 12 Volt, EPDM Seals............. $ 1467.30 Auto Batch, 12 Volt, Viton® Seals............. 1574.50 Auto Batch, 12 Volt, Silicon Seals............. 1547.70 10’ Extension Cable to Mt. Meter/ Controller Remotely from 12V Pump........ 106.53 Auto Batch, 115 Volt, EPDM Seals........... 1551.72 Auto Batch, 115 Volt, Viton® Seals........... 1629.44 Auto Batch, 115 Volt, Silicon Seals........... 1629.44

RETAIL

(800) 228-9666

Shown with Optional Meter

• 12 Volt or 115 Volt Pump • 1” Telescoping Suction Pipe & 2” NPT Bung Adapter • 1” x 12’ Discharge Hose with ball valve nozzle • Models Also Available for GEM Cap Tanks — CALL

Viton® is a registered trademark of DuPont Performance Elastomers

DULTMEIER SALES • OMAHA, NE

Part No.

•

Part No.

Description

DP T4012E DP T4012V DP T4015E DP T4015V

12V Top Unload System, EPDM, Less Meter...... $ 699.48 12V Top Unload System, Viton®, Less Meter...... 739.68 115V Top Unload System, EPDM, Less Meter........ 766.48 115V Top Unload System, Viton®, Less Meter........ 806.68

www.dultmeier.com

• DAVENPORT, IA

RETAIL

(800) 553-6975

E1149

Mini-Bulk Pump Accessories

194

GEM ® Cap Tank Adapters

Hose Assemblies for Herbicides

SRA700R

SPAN

SPA700RA

SI SPAN: Use with SPA700G gasket to adapt DD6 pump to GEM ® cap tanks (8-1/4” diameter coarse threads). Add SI SPA700R 2” FPT & 3/4” FPT - for manual recirculation; or SI SPA700RA 2” FPT & 3/4” FPT with one way check valve for auto recirculation when nozzle valve is released, recirculation continues. For use with 2” MPT pumps. Use with KD04200 suction tube. Part No. SI SPAN SI SPA700R SI SPA700RA SI SPA700G SI KD04200

“EPDM” FITTED REPLACEMENT HERBICIDE HOSE ASSEMBLIES Part No.

Size

Crimped Ends

RETAIL

GD HS2470

3/4" x 12'

3/4" MPT

$ 36.72

GD HS9379

1" x 12'

1" MPT

40.47

Description RETAIL GEM® Cap adapter for DD6 Pump............................ $ 42.88 2” FPT & 3/4” FPT Adapter Plate............................... 34.57 2” FPT & 3/4” FPT Adapter Plate with check valve....... 47.97 Gasket for SI SPAN................................................... 46.90 34” Suction Tube........................................................ 36.18

IBC One-Way Check Valves

—Polypropylene —

Mini Bulk Tank Adapters / Couplers / Lids WBC230224

FITN33 mounts 2” Scienco pumps on Monsanto tanks with internal check valve Both are part B poly lever couplings by 2" FPT connection.

WSFBC210

Part No. TK WFC230254 TK WSFBC210

F0615 is 2" male buttress thread x 2" FPT poly open adapter.

Description RETAIL One Way Check Valve to fit MAUSER/MAMOR Tanks. $ 48.91 One Way Check Valve to fit Schutz Tanks............... 47.17

PH25

HFA01 converts a DD6 tank opening to 2” FPT opening.

Security Wire Seal Tampered-Evident Plunger Style

Includes red plunger style acetal plastic housing with stainless locking plunger, 7 Digit numbers (all different) and 12” 3-ply galvanized wire. No tools required; simply push to lock. Cannot be opened unless the seal is destroyed.

D D

FITN33

600-105

MBP200

Part No. DU PSW-97 D

200ABT

Description RETAIL Tamper-Evident Plunger Seal with 12” Wire...................... $ 1.01

Micromatic RSV Stainless Coupler

F0615

These EPDM Hose Assemblies are first quality replacements for HERBICIDE HOSES. For Sotera & Scienco Pump Units.

TA283

PVDV

Micromatic RSV Stainless Steel Fill Coupler for filling closed systems using RSV drum valves. Allows approximately 30 GPM D Part No. Description RETAIL fill rate, coupler is self venting and has 1” FPT SI FITN33 2-1/2" Monsanto Keylock™ Coupler (Scienco)........ $ 65.39 inlet fitting. Viton® seals. SI FITN19G 2-1/2" Replacement Gasket..................................... 15.81 FR F0615 2" Male Buttress x 2" FPT Adapter........................... 19.23 TK MBP200 2” Male Buttress x 2” MNPT (Poly)........................... 12.80 TK 200ABT 2” Female Buttress x 2” Male Adapter (Poly)............ 16.21 Part No. RETAIL TK TA283 2” Female Buttress x 2” MNPT (Poly)....................... 20.77 DP R4003 Micromatic RSV Stainless Coupler, 1” FPT Inlet............ $ 214.40 FR 600-105 2" MPT x 2" MPT x 1-1/4” FPT Adapter (Cast Iron)... 40.47 SI PH25 2” MPT x 2” FPT X 1” FPT Adapter (Poly)................ 46.90 VK PVDV 2” MPT Polypropylene Vent (Low Profile)................. 26.00 TK TL652EPA High Capacity Vented Lid for 275 Gallon Cage Tanks 18.63

Telescoping Suction Pipes

Visit Our Online Store Anytime. Anywhere.

dultmeier.com Part No. Description RETAIL FR F1855 1” Poly Telescoping Suction Pipe. 23”-41”.......... $ 30.15 GI 110241-01 Adjustable Suction Pipe..................................... 27.87 Viton® is a registered trademark of DuPont Performance Elastomers

DULTMEIER SALES • OMAHA, NE

(800) 228-9666

•

www.dultmeier.com

• DAVENPORT, IA

(800) 553-6975

E0774

Chemical & Water Meters Meters for Chemicals

Dura-Meters

E85 or Biodiesel greater than B20 must use nickel-plated meters

Features: 100% Moisture-Sealed circuitry make meter impervioustowaterintrusion•Extremelytoughandimpactresistant Lexan faceplate; faceplate also over-molded with Santoprene for chemical resistance and gel-filled for improved shock resistance • Large 2” tall backlit display with 3/4”+ letters for current flow total • Displays show Current Total, Batch Total and Totalizer (all resettable); Gals, Liters or Ounces • Power consumption % remaining (battery strength) also shown on display; runs on (4) AAA batteries for long battery life • Can store (5) different calibration factors and also includes a “Quick List” of some common products • Unique meter design allows for both inline and 90° (back mount) applications • Flow Rate: 2-22 GPM; Accuracy: 0.5%; Maximum Pressure: 40 PSI; Operating Temperatures: -10° to +130° F. • 1” FPT ports • Wetted materials for corrosion resistance: Polypropylene, 304SS; Ryton, EPDM, Viton® or Silicon seals • Backed by 2 Year Warranty.

800 Series Digital Meters

1" FPT waterproof polypropylene digital meter. 2-20 GPM at pressures to 125 psi.Rated -10° to +130° F. Use at hose end or at the pump • measures ounces/ pints/quarts/gallons/liters • “Quick Calc” feature calibrates to +/- 1/2% • (2) AA batteries • Use 825 for Agricultural chemicals, fertilizer, crop oil, diesel, anti-freeze and DEF. • Viton® or EPDM seals • Not for resale use.

825

800 Series Mechanical Meters Mechanical meters with capacities of 5-20 GPM • 50 psi • +/- 1% accuracy • gallon measure • register to 100 Gallon in 1/10 increments • 100,000 gallon totalizer • aluminum body • Not for resale use.

195

900 Series Mechanical Meters 807 1-1/2 mechanical meters with capacities 6-40 GPM, 50 psi, +/- 2% accuracy • register to 1000 gallons in 1/10 increments • totalizer to 1,000,000 gallons • aluminum body • Not for resale use. Part No. CHEMICAL METERS RETAIL FR 807CN-1 1" Nickel Coated Mechanical Chemical Meter.. $ 330.98 FR 825 1" Digital Chemical Meter w/side port, Viton..... 263.98 FR 825X700 1” Digital Meter for Lumax & Lexar, EPDM....... 265.32 FR 850 1" Digital Chemical Meter w/air eliminator........ 343.04 FR 911T-1-1/2 1-1/2” Nickel Coated Mechanical Chemical Meter... 423.44 REPAIR KITS FR F1582 For 820,825,850 Digital Meters.................... $ 116.58 FR 800KT For All 800 Series Mechanical Meters......... 85.09 FR 900KT For All 900 Series Meters............................ 106.53

Part No. RETAIL DP 3000E 1” Dura-Meter, EPDM................................ $ 349.74 DP 3000V 1” Dura-Meter, Viton®................................ 357.78 DP 3000S 1” Dura-Meter, Silicon *.............................. 360.46 DP MFP01 Electronic Face Assembly Replacement... 266.66 * Use Silicon Seals for Resicor®, Instinet® Keystone, Surpass, etc.

Inline Digital Poly Turbine Meter Accurate Within 1% Accurate with 1%, the TT10PN Inline DigitalTurbine Meter sets the standard for accuracy, ease of use and safety. It has factory presets for 18 fluids and more safety approvals than any other meter in its class. Replaceable AA batteries keep your meter running and downtime to a minimum. A rubber boot helps protect the meter and electronics from impact damage.

SEM10 & SEM10SS

Electronic Flow Meters • Ag Chemical • Cleaners & Soaps • Water • Anti-Freeze • Lubricants/Cutting Oils • Coolants

The SEM10 rated to 60 psi. Powered by a 3 Volt Lithium battery. High strength nylon body, Viton® seals. Large anti-glare display for easy D readout. Temperature range of 10° to 150˚ F. at 2 to 30 GPM. Features: Large 0.7" LCD display characters • Simple one touch operation • Choice of three calibration procedures • Displays current total (resettable) & lifetime total (non-resettable) • Extended battery life, auto shutoff in 40 seconds • Positive displacement nutating disk accurate to +/-0.5% • Display measures up to 999,999.9 for greater accuracy • 1" Male NPT (in back, out left). The SEM10FTV/FTE Electronic Flow Meter is a hose end version (in left, out right). Bidirectional. Nylon body. Viton® or EPDM seals. 1” FPT x 1” MPT. The SEM10SS Electronic Flow Meter allows for three calibration modes, rated to 100 psi. Includes a Lithium battery, 316 stainless steel housing with polypropylene and nylon internals. Viton® seals. Temperature range from -15˚ F. to 185˚ F. at a flow rate of 2 to 30 GPM. The SEM10SS displays current total (resettable), total #1 (resettable), lifetime total (non-resettable) Not for resale use. Part No. SI SEM10 Electronic Flow Meter, Viton®.............................. SI SEM10FTV Electronic Flow Meter, Hose End Style, Viton®... SI SEM10FTE Electronic Flow Meter,Hose End Style, EPDM ... SI SEM10SS Electronic Flow Meter, SS, Viton®....................... SI SEM10KIT-1 Electronic Replacement Head for SEM10 Meter. SI SEM20KIT Wobble Plate Kit for 10SS Meter.........................

Part No.

RETAIL

$ 227.80

1” • 2” • 3”

• Displays Flow Rate & 3 Separate Total Volumes

The Raven Flow Max 221 measures liquid pumped from one tank to another while displaying flow rate and volumes total on a self-contained, 6-digit LCD display. Flow can be displayed in either gallons or liters. It can be directly mounted in-line on the sprayer, nurse truck, or chemical fill tanks. 150 PSI rating. 14° - 140° F. rating. Part No. RETAIL

DULTMEIER SALES • OMAHA, NE

Inline Digital Poly Turbine Meter................

Designed to accurately meter liquids such as fertilizer, water, wastewater, deicing liquids and other liquids which are electrically conductive. No moving parts means less chance of damage than other styles of meter. Use with conducting liquids only. Not for Fuels. Features: Simple & easy to use • Factory preset calibration requires no adjustment • Batch total and flow rate. Shuts down after idle for 12 minutes. • Digital readout is designed for outdoor use • Temperature range is 0° to 150° F. • Operates on six AA batteries • Off/On shutdown after 12 minutes • Warranty is 1 Year on electronics • All meter sizes hold +/-1% accuracy. Part No. GPM RETAIL D

• 2" Flanged (Full Port) and 2" FPT Plumbing

IND

• UL Listed and CE, ATEX, ICECEx Listed

Full Port Poly Mag Meters

• 3.6-Volt AA Replaceable Battery

Flow Meter $ 1120.24

• Weight is Only 9.6 oz. • Compatible with Many Agchemicals DEF, AntiFreeze, De-Icing Fluid, Non-Potable Water & Other Chemicals • Not for Gasoline or Petroleum Products • 2 Year Warranty

Description

FR TT10PN

• 5 - 200 GPM Range Maximum Flow Rate

RV 221

2-35 GPM Port Size is 1” FNPT Engineered Polymer Operating Pressure is 50 PSI 0° F. to 130° F. +/-1.00% Meter Accuracy Compact: 4” Long x 2.6” Wide x 2.9” High • Measures Ounces, Pints, Quarts, Liters or Gallons • (2) AA Battery Power Source

RETAIL $ 239.86 266.66 239.86 408.70 180.90 122.61

Flow Max 221 Flow Meter

Features: • • • • • • •

TK FM100 TK MFM100 TK MFM220 TK MFM300

1” FPT Mag Meter................ 2 - 110 1” Flanged Mag Meter.......... 2 - 110 2” FP Flanged Mag Meter.... 6 - 300 3” Flanged Mag Meter.......... 14 - 670

$ 883.06 883.06 1002.32 1258.26

Viton® is a registered trademark of DuPont Performance Elastomers

(800) 228-9666

•

www.dultmeier.com

• DAVENPORT, IA

(800) 553-6975

E0270

Chemical & Oil Meters

196

Stainless Steel Digital Flow Meters

PVC Flowmeters Economical Turbine Meters from GPI can be used in hundreds of applications where D metering water and other compatible liquids. PVC bodies with PVDF (Kynar) turbines, tungsten carbide rotor shafts & ceramic bearings. Factory calibrated for water and can also be field calibrated for other liquids. Lithium batteries provide 9,000 hours of use. Accuracy: 3%. Temperature Range: 14° - 140° F. Rated to 150 PSI pressure at 73° F. Digital display shows batch total, cumulative total, rate of flow, (gallons or liters) and is rated for outdoor use (weather-tight PVC). Not for Most Ag chemicals; 2, 4-D only. (3” size available with FPT or Slip ends. 4” size available Flanged, FPT or Slip ends). Not for resale use.

GPI Stainless Turbine Flowmeters can be used with a variety of products including ammonium, plating solutions, gasoline & diesel, many chemicals & solvents and other compatible products. UL & FM rated for flammable liquids. 316SS body & rings; ceramic bearings; tungsten carbide shafts; PVDF (Kynar) rotors. LCD display is outdoor rated (NEMA 4X) & includes resettable batch total, cumulative totalizer, flow rate (gallons or liters) & two user calibrations. 1.5% accuracy. Rated to 1500 PSI. PH range: 5-8 at ambient temperatures. Use for low viscosity liquids (20 CPS maximum viscosity). Temperature Range: 14-140° F. with local readout on meter body (or -40 to 250° F. with remote mounted display kit). Lithium batteries good for 9,000 hours. Sizes 1/2” through 2” FPT. Also available in aluminum & brass and with 150 lb. flanges. Displays with 4-20 ma (loop powered) also available. Protect 1/2”-3/4” meters with 60 mesh screens & 1”-2” meters with 30 mesh screens. Call for chemical compatibility check. Not for resale use.

Part No. Ports Flow Range Readout GI G2S05A 1/2” FPT 1-10 GPM Local Digital GI G2S07A 3/4” FPT 2-20 GPM Local Digital GI G2S10A 1” FPT 5-50 GPM Local Digital GI G2S15A 1-1/2” FPT 10-100 GPM Local Digital GI G2S202B 2” FPT 20-200 GPM Local Digital GI 113265-1 * Remote Display Mount Kit...................... GI 113275-1 * FM Approved Remote Display Mount Kit.

FM300H Electronic 1” Chemical Meter 2 to 20 GPM Thin Fluids 1.5 to 15 GPM Medium/Thick Fluids

50 PSI

For use with most agchemicals and other selected chemical • High-tech injection molded plastic housing • Reliable nutating disc measuring chamber • Field replaceable 9-volt battery • Large LCD display • 6-digit resettable batch and non-resettable cumulative totalizers • Two permanent factory calibrations registers. Cal A-Thin fluids (0-10 cps. viscosity) Cal B-Medium/ Thick fluids (10-450 cps. viscosity) • ± 3% Accuracy • ± 1/2% accuracy possible with user calibration (Cal C). Not for resale use. Part No.

GPM

GI FM300H 1" Electronic Herbicide Meter 2 to 20

RETAIL

$ 332.32

Electronic Flowmeters Will handle thin & thick liquids. Can be used for DEF. Automatic “On” with fluid flow. 0.5% Accuracy. Rated to 20 GPM and 100 PSI. Long life 3V Lithium battery. Displays gallons or liters. 4 digit LCD display with 0.8” letters. Glass-filled nylon body and nutating disk design. Simple calibration steps. Pump mounted version includes 1” MPT rear inlet & 1” MPT side outlet. Hose end version includes 1” FPT ports. Viton® seals. Not for resale use.

Overall Flowrate Ports Length Range RETAIL 1/2” FPT 3.8” 1-10 GPM $ 473.02 3/4” FPT 3.8” 2-20 GPM 523.94 1” FPT 4.1” 5-50 GPM 601.66 1-1/2” FPT 5.4” 10-100 GPM 683.40 2” FPT 5.5” 20-200 GPM 737.00 3” FPT 14.7” 40-400 GPM 1231.46 4” Flange 14.0” 60-600 GPM 1373.50

Chemical & Water Electronic Digital Meters Turbine Flowmeters for AgChemicals, Water & Other Compatible Chemicals

Features: 1.5% Accuracy • Automatic “ON” with fluid flow - Automatic “OFF” 5 minutes after fluid flow stops • Lithium batteries (3N Series) • 6-digit LCD display with two-place floating decimal point for both batch (resettable) and Cumulative totals (9,999) • Factory calibrated in U.S. gallons for non-viscous fluids such as water • Field calibration for viscous liquids, gallons, quarts, pints • Nylon bodies and turbines, Tungsten carbide shafts and ceramic bearings. Not for resale use.

Call for Pricing

* Remote Display Mount Kits include coil, 10’ outdoor cable, mounting plate & panel mount box (not outdoor rated); use FM Approved Kit for flammable liquids.

Part No. Description GI TM050N 1/2” PVC Meter GI TM075N 3/4” PVC Meter GI TM100N 1” PVC Meter GI TM150N 1-1/2” PVC Meter GI TM200N 2” PVC Meter GI TM300N 3” PVC Meter GI TM400F 4” PVC Meter

FM1100

FM1100I

Part No. RETAIL SU FM1100 1” Digital Meter, Pump Mount Style........... $ 282.74 SU FM1100I 1” Digital Meter, Hose End Style................ 280.06 SU FM1100EK Electronic Kit for above Meters.................. 174.20 SU FM1100HK Meter Housing Cover Kit for Above Meters 30.02 SU FM1100NK Nutating Chamber Kit for Above Meters.... 75.71

GPM Flow Fluid Maximum Part No. Construction Range Passage Ports Pressure RETAIL GI 3N30GM Nylon 0.3 to 3.0 1/4" 1" FPT 150 PSI $ 501.16 GI 1N31GM #† Nylon 3.0 to 30 1" 1" FPT 150 PSI 231.82 GI 3N31GM Nylon 3.0 to 50 1" 1" FPT 150 PSI 475.70 # Water Only. † Not field calibratable; uses AAA batteries.

Oval Gear Digital Flow Meters For Medium & High Viscosity Liquids GPI Oval Gear Flowmeters are specially designed for medium and high viscosity liquids including oils, lubricants, polymers and other D compatible products. Standard meter rotors handle viscosities from 5-1000CPS; models available for up to 1,000,000 CPS. Aluminum or 316SS bodies (bronze available), PPS/ carbon or bronze bearings; stainless shafts, PPS or stainless rotors. Viton® seals are standard (Teflon available). Mechanical or digital local display includes resettable batch total, cumulative totalizer, flow rate (gallons or liters) & two user calibrations. 1.0% accuracy. 75-500 PSI pressure ratings (800 PSI available). Temperatures to 176° F. with local readouts on meter body. Sizes 1/8” through 2” FPT. 1-1/2” & 2” sizes also available with 150 lb. flanged or sanitary (Tri-clover clamp) ends. Protect 1/8”-1/4” meters with 200 mesh screens; 1/2”-2” meters with 60 mesh screens. Not for resale use. Part No. Ports GI GM3A2R4 1/4” FPT GI GM3R2R2 1/4” FPT GI GM505A2M2 2-1/2” FPT GI GM505S2M2 1/2” FPT GI GM510A2M2 1” FPT GI GM510S2M2 1” FPT GI GM515A2M2 1-1/2” FPT GI GM515S2M2 1-1/2” FPT GI GM520A2M2 2” FPT GI GM520S2M2 2” FPT

Flow Range Max. Press. Body Rotor Readout 0.07-2.2 GPM 75PSI Alum. Stainless Local Digital 0.07-2.2 GPM 75PSI PPS PPS Local Digital 0.26-7.9 GPM 500 PSI Alum. PPS Local Mech. 0.26-7.9 GPM 500 PSI SS PPS Local Mech. Call 1.6-32.0 GPM 500 PSI Alum. PPS Local Mech. for 1.6-32.0 GPM 500 PSI SS PPS Local Mech. 2.6-66.0 GPM 500 PSI Alum. PPS Local Mech. Pricing 2.6-66.0 GPM 500 PSI SS PPS Local Mech. 4.0-92.5 GPM 500 PSI Alum. PPS Local Mech. 4.0-92.5 GPM 500 PSI SS PPS Local Mech.

Viton® is a registered trademark of DuPont Performance Elastomers

IND

DULTMEIER SALES • OMAHA, NE

(800) 228-9666

•

www.dultmeier.com

• DAVENPORT, IA

(800) 553-6975

E0760

Flow Meters Paddle Wheel Flow Meters Paddle Wheel Flow Meters with Digital Flow and Totalizer LCD displays. Chemical-resistant construction features Polypropylene or Stainless Steel bodies, Kynar PVDF paddle sensor and FKM o-rings.

• Tamper-proof design • Battery operated, batteries included • Factory calibrated • Weather-resistant Nema 4X enclosure • Not recommended for direct sunlight

FM100H Mechanical Chemical Meter • 1" Ports

FEATURES: • Easy-to-read 6 digit LCD display

197

• 4 to 20 GPM Flow Range

• Maximum “continuous” flow rates should be less than upper 25% of flow range * • Pressures to 300 PSI. Temperatures to 200° F. • Accurate to +/- 2% • Not for direct resale

• 50 PSI Reliable Nutating Disc Meters for reliable operation - (For non-commercial applications) • Compact and lightweight cast Aluminum housing and Viton® seals for corrosion resistance • Mount in Vertical or Horizontal position • Factory calibrated in U.S. Gallons - Easily recalibrated for a long list of herbicides and compatible chemicals • 4-Digit Batch Total in 1/10th increments with resetting capabilities (999.9 gallons per delivery) 5-Digit Cumulative Totalizer (non-resettable). ± 5% Accuracy. Not for resale use. Part No. GI FM100H 1" Mechanical Herbicide Meter

POLY Meters

Orion2 FlowMeters

Electromagnetic Flow Meter with No Moving Parts

These precise flowmeters work by utilizing sensors to relay pulse signals and converting them into gpm readings.

2” FPT MAG Meter

F e a t u r e s : N o m ov i n g parts • Wetted parts are 316SS & polypropylene • Low maintenance • Performance independent D from fluid density and viscosity • Wide variety of flows for use in diverse applications • High precision (maximum error is 0.5%) • Pulse output is 0-12 volts. Only 300mA consumption • Accuracy and precision saves chemical throughout the life of the system • Integrates with existing rate controllers. Adapter cable sold separately.

POLY

STAINLESS

AE2650 Cable for RAVEN AE2652 Cable for John Deere

STAINLESS Meters AE26524 Cable for Mid-Tech

Part No. BL RT500MG2 BL RT500MG1 BL RT750MG2 BL RT750MG1 BL RT100MG2 BL RT100MG1 BL RT100SG1 BL RT150MG1 BL RT150MG2 BL RT150MG3 BL RT150SG1 BL RT200MG1 BL RT200MG2 BL RT200MG3 BL RT200MG4 BL RT200SG1

GPM RETAIL 4 to 20 $ 302.84

Body Polypropylene Polypropylene Polypropylene Polypropylene Polypropylene Polypropylene 316 Stainless Polypropylene Polypropylene Polypropylene 316 Stainless Polypropylene Polypropylene Polypropylene Polypropylene 316 Stainless

Pipe Size 1/2” MPT 1/2” MPT 3/4” MPT 3/4” MPT 1” MPT 1” MPT 1” MPT 1-1/2” MPT 1-1/2” MPT 1-1/2” MPT 1-1/2” MPT 2” MPT 2” MPT 2” MPT 2” MPT 2” MPT

* Flow Range .5 to 5.0 GPM 2.0 to 20 GPM .8 to 8.0 GPM 3.0 to 30 GPM 2.0 to 20 GPM 5.0 to 50 GPM 6.0 to 60 GPM 4.0 to 40 GPM 6.0 to 60 GPM 10 to 100 GPM 15 to 150 GPM 4.0 to 40 GPM 6.0 to 60 GPM 10 to 100 GPM 20 to 200 GPM 30 to 300 GPM

DULTMEIER SALES • OMAHA, NE

RETAIL $ 746.38 746.38 746.38 746.38 746.38 746.38 1088.08 829.46 829.46 829.46 1114.88 853.58 853.58 853.58 842.86 1149.72

(800) 228-9666

•

Orion 2 Flowmeters withNPT Ports Port Part No. GPM Size AG G6363 .08 - 1.6 3/4” FPT AG A16363 0.3 - 5 3/4” FPT AG A26363 0.6 - 13 3/4” FPT AG A36464 1.3 - 26 1” FPT AG A46464 2.6 - 53 1” FPT AG A56666 5.0 - 106 1-1/2” FPT AG A65757 8.0 - 158 2” MPT

Max PSI RETAIL 290 $ 833.48 290 833.48 290 849.56 290 849.56 290 844.20 290 854.92 290 853.58

Adapter Cables HY AE2650 Adapter Cables - Orion to Raven®.............................

$ 147.07

www.dultmeier.com

• DAVENPORT, IA

(800) 553-6975

E1015

Barrel & Drum Hand Pumps

198

Drum and Barrel Pumps for a wide variety of transfer applications. Designed for Acids, Alkalis, Solvents, Detergents, Chlorine, Petroleum Products, Dairy Chemicals and Water Removal. Most pumps are sold with 2” IPS adapters for the most common drums and barrels. However, ACT or Rieke Buttress, Glass Carboy and Poly Carboy adapters are also available. Pumps are offered with discharge hose or spouts as shown. (Note: Pump and chemical compatibility should always be checked before use.)

Acid/Alkali/Detergent Hand Pumps

Dairy Chemical Hand Pumps These pumps are designed to transfer most dairy soaps and alkalis used in cleaning milk lines. Pumps feature PVC barrels with “Hypalon” valves and seals. Standard safety features include twist handle to prevent inadvertent lifting of handle, patented “strap lock” to prevent unauthorized use and antisiphon spout to reduce spills. 1-1/4” diameter in either 12” or 18” lengths. 18” Dip tubes are included to reach the bottom of chemical containers. 2” IPS bung adapter is also included.

Hand operated pumps for safely transferring detergents, waxes, alkalis and acids. Pumps are 38” long, 1-1/2” in diameter and deliver 28 oz. per stroke. 2” IPS fine thread bung adapter is included. 236 features PVC barrel and shaft with Viton® seals and valves. 36” polyethylene discharge hose is included. UL listed for transfer of up to 50% Sulfuric Acid at up to 120° F.

236 436

436 features PVC barrel and shaft with “Hypalon” seals and valves. 36” polyethylene discharge hose is included. Best choice for Alkalis. UL listed for transfer of up to 30% Hydrochloric Acid at up to 100° F. ACID/ALKALI/DETERGENT PUMPS Part No. Seal

BI 236PF3S BI 436PF3S

Hand Pump Hand Pump

DAIRY CHEMICAL PUMPS Part No. Length

BI DP12SPS BI DP18SPS

Output/Stroke

Viton® Hypalon

336 offers an effective and easy way to transfer oils, kerosene, diesel fuel, etc. Features PVC barrel with urethane valves and Buna seals. Pumps are 38” long x 1-1/2” diameter. Rated to 28 oz. per stroke. 36” Discharge hose and 2” IPS bung adapter is included.

PETROLEUM PUMP Part No.

Seal

Output/Stroke

BI 336PF3S

Buna

28 oz.

CHLORINE PUMP Part No. Length

BI SP1209M

BI 636PF3S

Hand Pump

$ 79.73 87.77

Seal

Output/Stroke

Viton®

28 oz.

9”

Seal

Output/Stroke

RETAIL

Viton®

5 oz.

$ 65.39

12A is an ideal choice for draining traps or pipes. Diameter is 1-1/2” x 12” long. 3’ inlet tube fits onto bottom of pump and extends down into trap or drain. Includes outlet tube for directing flow into pail or bucket. Seal less design. Output is 8 oz. per stroke.

636 is designed for the transfer of BioFuel products from drums or pails to equipment fuel tanks. Nonsparking construction. Features a PVC barrel and Viton® valves and seals. Pump has 36” barrel x 1-1/2” diameter. Rated to 28 oz. per stroke. 36” Hose and 2” IPS bung adapter are included.

BIOFUELS PUMP Part No.

RETAIL

5 oz. 8 oz.

Water Hand Pumps

RETAIL

$ 122.61

BioFuels Hand Pump

636PF3S

Output/Stroke

SP1209M 336PF3S

Seal

Hypalon Hypalon

A hand pump that is specifically designed for transferring Liquid Chlorine from 5 gallon containers with 70mm lid caps. Standard with a twist handle to prevent inadvertent lifting of handle and safety strap to help prevent unauthorized use. Pump is 1-1/4” diameter x 9” length Output is 5 oz. per stroke. 9” discharge hose is included. Construction is PVC with Viton® seals.

$ 164.49 151.09

28 oz. 28 oz.

DP12SPS DP18SPS

Chlorine Hand Pump

RETAIL

Petroleum Hand Pump

Hand Pump

12” 18”

230PF & 136PF6 Pumps are designed for manual removal of water when electrical means are not available. Just place pump end in water and up/ down motion removes water easily and quickly. Construction is high impact PVC. No priming is required. Discharge hose is included with both models. 915F Compact hand water pump. Includes 2” x 36” flexible intake tube with foot valve and 7’ outlet tube for directing discharge flow. Pump is 3” diameter x 24” long. Output is as high as 16 GPM. Construction is PVC.

RETAIL

$ 129.31 D

12A

Find Us on Facebook and Twitter

915F 230PF/136PF6 WATER PUMPS Part No.

BI 12A BI 230PF BI 136PF6 BI 915F

Length

Discharge

Output/Stroke

RETAIL

12” 30” 36” 24”

12” Pipe 30” Hose 72” Hose 84” Hose

8 oz. 22 oz. 35 oz. 34 oz.

$ 53.60 75.71 72.36 537.34

Viton® is a registered trademark of DuPont Performance Elastomers

IND

DULTMEIER SALES • OMAHA, NE

(800) 228-9666

•

www.dultmeier.com

• DAVENPORT, IA

(800) 553-6975

E0949

Hand Pumps Plastic Hand Pumps PSP1

MR50-5

DSP2 Drum Pump is an inexpensive hand pump designed for 55 gallon drums with heavy buttress bung fittings. All polyethylene construction. Discharge tube is 40”. Up/down design develops 4 oz. per stroke. 360 & 365 Drum Pumps feature up/down handle design with rigid discharge spout and stainless plunger rod. Both models fit 15, 30 or 55 gallon drums. Rated to 8 ozs. per stroke. Tube length is 37”. 360 features polypropylene body and “Viton® E” o-ring. Good choice for detergents, anti-freeze and mild chemicals. 365 features nylon body and Teflon o-ring. Best choice for aggressive chemicals, solvents, mild acids, acetones and windshield fluids.

PAIL PUMPS Part No.

Fits Containers

RETAIL

5 Gallon 5 Gallon

$ 12.06 40.33

Fits Containers

RETAIL

TO PSP1 Pail Pump TO MR50-5 Pail Pump DRUM PUMPS Part No.

TO DSP2 NS 360 NS 365

For many chemicals, acetone, methanol and ethanol solvents. Supplied with a 2" bung adaptor, 8' long hose, hose end nozzle with built-in syphon breaker and two-piece suction tube for 55 gallon drums. The Body and components are glass-filled polyester or Ryton®, Piston rod and springs are stainless. Double acting handle pumps one-half quart on each forward or backward stroke. Capacity: 25 gallons per 200 strokes. Max Liquid Temperature: 125° F. Max Liquid Viscosity: 2000 SSU. Port Diameters: Inlet 1" NPT, Outlet 3/4" MPT. Weight: 8 lbs.

Plastic Hand Pumps for a variety of chemical transfer applications. An ideal choice for transferring detergents, waxes, acids, solvents and ag chemicals. Designed for 5 gallon pails or 15/30/55 gallon drums as noted. Note: Always check pump and chemical compatibility before use. PSP1 Pail Pump is an inexpensive polyethylene siphon pump. Squeeze pump creates siphon action to drain product from 5 gallon pails. Includes adapters for 3/4” drum fittings, 2” bung fittings, flex spouts and rigid containers. Discharge hose is 22”. MR50-5 Pail Pump is a compact hand pump that features a polyethylene body and Viton® o-ring. Can be used for detergents and mild chemicals from 5 gallon pails. Includes rigid discharge spout, Inlet tubes and adapters will fit 3/4” drum fittings, 2” bung fittings, flex spouts and rigid containers. Adjustable output from 2,4,6 or 8 ozs. per stroke.

HE4 Polyester Glass Reinforced pump with Viton® internals and EPDM hose. 360

365 D

ester Glass Reinforced pump with Viton® internals, & cross linked polyethylene hose

RESISTS ATTACK from many HRV4A Ryton ® chemicals and acids. Glass Reinforced Pump with Viton® internals, cross linked polyethylene hose and polyester suction tube. For maximum chemical resistance. Not recommended for use with: Chlorinated hydrocarbons, and some fumigants such as Dibrom and Telone II. Not for HCL or sulfuric acids.

— Call for Chemical Compatibility Check — Part No. PACER PISTON PUMPS RETAIL PR HE4 Glass-filled Polyester Pump............................ $ 182.24 PR HRE5C RYTON®/EPDM Hand Pump for Ethanol / Methanol 377.88 PR HPV4A Glass-filled Polyester Pump............................ 249.24 PR HRV4A RYTON® Transfer Pump ................................ 340.36 PR HPE1A Glass-Filled Polyester Pump with EPDM *...... 188.61 PR 3456 Polyethylene Suction Tube (as replacement).. 35.38 PR 167P Repair Kit for HE4/HPN.................................. 60.97 * Suitable for Methanol.

DSP2

Piston Pump for Ag Chemicals FILLRITE Model 25V Piston Pump is an economical way to transfer chemicals. This pump is self-priming and has discharge on the down stroke. Approximately 11 strokes per gallon. An anti-drip nozzle prevents leaks and waste. Features: Viton® Seals • Polypropylene • 2" Inlet Fitting • Lock Ring for 360° Alignment • 36" Telescoping Suction Pipe • Hose Kit & Buttress Adapter Options. Use For: Fertilizers, Herbicides, Pesticides, Water, Anti-Freeze, Mild Acids, Oils, Diesel Fuels, Degreasers. DO NOT USE with low flash point fluids. Check compatibility before using aggressive acids or chemicals.

STANDARD FEATURES: Locking Handle

25V

• Anti-pumping safety lock on handles

Part No. RETAIL FR 25V Hand-Operated Piston Pump..... $ 107.20

• Swivel Discharge spout for drip-free operation

50S Safety Measure

• 2-Year Warranty • Free service kits for the life of the pump

Polypropylene Drum Pump

Ezi-Action™ Safety Measure. Great accessory for closed delivery and accurate measurement of pumped solutions. Mounts to all Ezi-Action pump spouts for hands-free dispensing. Capacity is 32 oz. (1 Liter). Measurements shown in ounces and milliliters. Construction is polyethylene. Part No.

NZ 255 NZ 6015 NZ 20055 NZ 50S NZ 70SK

IND

HPV4A Poly-

Ezi-Action™ Drum Pumps

• Polypropylene and polyethylene construction

Hand Transfer Pumps

Products that use a petroleum based material such as diesel fuel will require pumps with Viton® internals and polyethylene hose. Methanol requires EPDM internals.

Drum Pump 55 Gallon $ 23.92 Drum Pump 15, 30/55 Gallon 45.83 Drum Pump 15, 30/55 Gallon 77.05

Ezi-Action™ Drum Pumps feature a unique design that allows for the transfer of a wide variety of chemicals and solutions. Even viscous products can be pumped. Suitable for pumping acid and alkalines, chlorines, oils, diesel, fertilizers and crop chemicals. Available for 5 gallon pails and 30 gallon or 55 gallon drums.

199

Container Output/ Size Stroke

Wt.

RETAIL

Drum Pump 5 Gallon 6 oz. 1 lbs. $ 50.92 Drum Pump 30 Gallon 15 oz. 1.5 lbs. 56.01 Drum Pump 55 Gallon 15 oz. 1.6 lbs. 66.33 Safety Measure, 32 oz........................................ 11.32 Service Kit........................................................... No Charge DULTMEIER SALES • OMAHA, NE

(800) 228-9666

MR60

Polypropylene Drum Pump for handling a wide variety of chemicals. Lever action design delivers 10 ounces per stroke with a capacity of 6 gallons per minute. Designed to fit 2" drum openings. Telescoping extension tube allows for use with 15, 30 and 55 gallon drums. Spigot rotates 360° for versatile discharge. Handles viscosity's equivalent to 90# oil. Self-venting design. Check valve is stainless steel. Internal o-rings are EPDM. Part No.

RETAIL

TO MR60 Plastic Drum Pump $ 99.83 Viton® is a registered trademark of DuPont Performance Elastomers

•

www.dultmeier.com

• DAVENPORT, IA

(800) 553-6975

E0274

Drum & Hand Pumps

200

Dual-Flo Piston Hand Pump

Drum Pumps Air-Operated Diaphragm Air-Operated Drum Diaphragm Pumps from Yamada. Designed for versatile and cost effective transfer and dispensing of liquids from 55 gallon drums. Wide variety of chemical compatibility. Complete units include pump, standpipe, bung adapter and fittings. Features: Self-priming • On/Off reliability • Ability to run dry • Ability to dead head • Portable • Lightweight • Aluminum, Polypropylene, Stainless and Kynar Bodies • Buna, Santoprene and Teflon Diaphragms shown, (Viton®,EPDM, Hytrel and Neoprene are also available) • Rated to 180° F. with Buna and Santoprene and 212° F. with Teflon diaphragms. Standpipes and bung fittings are included.

Will deliver more flow with greater ease than any other hand pump on the market. 2 quarts per stroke on lightweight fluids. Heavier fluids can be handled by moving the pivot pin on the handle which changes the stroke of the pump to deliver 1 quart per stroke. Lightweight aluminum body, stainless steel shaft and piston liner, a Teflon piston ring and packing, adjustable poly suction pipe, 2" MPT base, and a thermoplastic nozzle. 1" FPT inlet and 3/4" FPT outlet with 8’ discharge hose and end spout. 18 lbs. HP100C CHEMICAL PUMP: For chemical products, compatible with aluminum, Viton® seals, and EPDM hose. Part No.

“GPI” HAND PUMPS

Wt.

RETAIL

GI HP100C Chemical Pump 19 lbs. $ 337.68 GI 114506-2 Repair Kit for HP100C - 150.08

1 Quart Volumetric Chemical Hand Pump

D D

HP100

MP1Q

• Simply turn hand 1 revolution to fill & another revolution to accurately dispense 1 quart • Displays in quarts & liters. • Viton® seals are standard • Includes 6’ x 1/2” discharge hose, 1” nozzle valve & telescoping suction tube • 2” MPT Bung Adapter

G15AN-D NDP-20BAN-D NDP-20BST-D D

Part No. Description RETAIL SI MP1Q 1 Quart Hand Pump with Hose, Nozzle Valve & Suction Tube. Wt. 9 lbs... $ 207.70

304SS Rotary Hand Drum Pump NDP-20BPS-D NDP-20BPT-D

Stainless Steel Drum Pump is designed for use in dispensing and transferring chemicals and liquids including many acids, acetones, alcohols, trichloroethylene, solvents, photographic chemicals and ketones which are compatible with pump component materials.

• Investment Cast 304SS Construction with Carbon Vanes. • Teflon Lip Seal. • Maximum Temperature is 200° F. Part No.

Port Pump Size Construction

• 6 GPM @ 70 RPM (12 oz./Stroke).

Max. Max. Flow PSI

YA DP10BAN-D 3/8” + Alum/Buna 5 GPM YA G15PS-D 1/2” * Poly/Santo 17 GPM YA G15PT-D 1/2” * Poly/Teflon 17 GPM YA G15AN-D 1/2” + Alum/Buna 16 GPM YA NDP-15BST-D 1/2” * Stainless/Teflon 13 GPM YA NDP-15FVT-D 1/2” † Kynar/Teflon 13 GPM YA NDP-20BPS-D 3/4” * Poly/Santo 29 GPM YA NDP-20BPT-D 3/4” * Poly/Teflon 29 GPM YA NDP-20BAN-D 3/4” + Alum/Buna 29 GPM YA NDP-20BST-D 3/4” # Stainless/Teflon 29 GPM

100 70 70 100 100 100 100 100 100 100

5270-98

Wt.

10 lbs. 15 lbs. 15 lbs. 17 lbs. 19 lbs. 14 lbs. 22 lbs. 22 lbs. 27 lbs. 37 lbs.

RETAIL

• 1-1/4” NPT x 40” Stainless Steel Suction Tube Assembly.

$ 834.82 CALL 829.46 955.42 1739.32 2051.54 1168.48 1273.00 1027.78 2637.12

• 1” SS Discharge Spout (Non-Threaded).

• Stainless Steel Bung Adapter fits 1-1/2” to 2” NPT. • Padlock Provision. Part No.

GR 5271-98

* Polypropylene Standpipe & Fittings. + Aluminum Standpipe & Fittings. # Stainless Standpipe & Fittings. † Kynar Standpipe & Fittings.

Wt.

RETAIL

Rotary Hand Pump 16 lbs. $ 593.62

SERVICE & REPAIRS Did you know? We can service almost every brand of pump we sell in our catalog. Call us at 1-800-228-9666 (Omaha, NE) for a quote! Viton® is a registered trademark of DuPont Performance Elastomers

DULTMEIER SALES • OMAHA, NE

(800) 228-9666

•

www.dultmeier.com

• DAVENPORT, IA

(800) 553-6975

E0866

Motor Driven Drum Pumps

201

STANDARD PUMP Drum Pumps are a seal-less centrifugal design that are designed for the transfer of difficult chemicals and liquids from drums, totes and tanks. This wide range of pumps are ideal for Agriculture, Automotive, Plating, Chemical Packaging, Waste Water Treatments, Pharmaceuticals, Petroleum and many more. Sold in pump packs that include motor, 39” pump tube (47”, 60” & 72” also available), transfer hose, bung adapter, transfer nozzle and storage bracket. Motors are 1-Phase, 50/60 hz, 110 or 220 volt.

Pump Package #1

Pump Package #6

for Corrosive Water Treatment Chemicals

for Mineral Acids

Pump Pack #1 for Corrosive Water Treatment Chemicals. Pump tube is CPVS, wetted parts are CPVC, Carbon and Hastelloy. Common chemical transfer includes Sodium Hypochlorite, Potassium Hydroxide, Calcium Chloride, Calcium Hydroxide, Chlorinated Water, Sodium Bromide and other products compatible with wetted parts. Viscosities to 1500cps. Rated to 15 GPM based on water. Rated to 190° F. Pump Part No. Volts Tube Wt.

SD 9430 SD 9431

110 220

Pump Pack #6 for Mineral Acids. Pump tube is 316SS, wetted parts are 316 stainless, Carbon and Teflon. Common chemical transfer includes nitric acid under 60%, citric acid, light oils and other products compatible with wetted parts. Viscosities to 1500cps. Rated to 21 GPM based on water. Rated to 175° F. Part No. Volts Pump Tube Wt.

RETAIL

CPVC 22 lbs. $ 1452.56 CPVC 22 lbs. 1468.64

SD 9414 110 SD 9415 220

Pump Package #2

for Light Oils & Machining Lubricants

Pump Pack #2 for Corrosive Acids and Alkalies. Pump tube is Polypropylene, wetted parts are Polypropylene, Carbon and Hastelloy. Common chemical transfer includes Hydrochloric Acid to 20%, Nitric Acid to 20%, Acetic Acid, Alkalies, Sulfuric Acid and other products compatible with wetted parts. Viscosities to 1500cps. Rated to 15 GPM based on water. Rated to 130° F. RETAIL

SD 9400 110 Polypropylene 21 lbs. $ 1402.98 SD 9401 220 Polypropylene 21 lbs. 1417.72

Pump Pack #7 for Light Oils and Machining Lubricants. Pump tube is Aluminum, wetted parts are aluminum, carbon Teflon and 316SS. Common non-corrosive chemical transfer includes light machining oils, hydraulic fluid, motor oils to 30 wt., antifreeze products, lubricating oils and other products compatible with wetted parts. Viscosities to 1500cps. Rated to 22 GPM based on water. Rated to 175° F. Part No. Volts Pump Tube Wt.

SD 9460 110 SD 9461 220

Pump Package #3

Pump Pack #9 for Flammable and Combustible Liquids. Pump tube is 316SS, wetted parts are Stainless, Carbon and Teflon. Motors are explosion-proof design. Common chemical transfer includes gasoline, solvents, Toulene, petroleum products, alcohol, Aqueous Ammonia and other products compatible with wetted parts. Viscosities to 750cps. Rated to 18 GPM based on water. Rated to 175° F. Pump Part No. Volts Tube Wt.

SD 9610 SD 9611

IND

RETAIL

22 lbs. $ 1644.18 22 lbs. 1685.72

for Flammable & Combustible Liquids

Pump Pack #3 for Highly Concentrated Acids and Alkalies. For very concentrated and extremely aggressive liquids. Pump tube is PVDF, wetted parts are Kynar, Carbon and Hastelloy. Common chemical transfer includes Sulfuric Acid-66 Baume, Nitric Acid to 98%, Propionic Acid, Sodium Hypochlorite, Searic Acid, Hydrofluoric Acid and other products compatible with wetted parts. Viscosities to 1500cps. Rated to 17.5 GPM based on water. Rated to 175° F.

SD 9420 SD 9421

Aluminum Aluminum

Pump Package #9

for Highly Concentrated Acids & Alkalies

Pump Part No. Volts Tube Wt.

RETAIL

30 lbs. $ 3123.54 30 lbs. 3144.98

Pump Package #7

for Corrosive Acids & Alkalies

Part No. Volts Pump Tube Wt.

316SS 316SS

110 220

316SS 316SS

RETAIL

39 lbs. $ 4503.74 39 lbs. 4487.66

RETAIL

110 PVDF-Kynar 28 lbs. $ 2106.48 220 CPVC 28 lbs. 2110.50

DULTMEIER SALES • OMAHA, NE

(800) 228-9666

•

www.dultmeier.com

• DAVENPORT, IA

(800) 553-6975

E1004

Submersible Well & Jet Pumps

202

Submersible Well Pumps

Jet Pumps

Flint & Walling 4" Stainless Steel Well Pumps provide reliable and efficient water service for farm, home or business. Can also be used for RO Spot Free Transfer Pumps. Stainless steel castings and housings for added corrosion resistance. Pumps feature 2 or 3 wire motors for ease of replacement or new installation projects. All motors shown are 1-phase (3-phase motors also available). Pumps are rated by model from 7 to 27 GPM at their most efficient flow curves. 1-1/4” FPT discharge. CONSTRUCTION FEATURES:

Non-corrosive cable guard protects motor wires from damage.

1. One-piece, stainless steel discharge head & NEMA faced mounting ring. 2. Built-in stainless steel check valve with elastomer ring for positive seal. 3. Sintered lead-free sleeve bearing with polypropylene sand slinger.

Shallow Well Jet Pumps from Flint & Walling. Ideal for homes, farms, cottages or wherever water booster service is needed. Specifically designed for applications with suctions lifts to 25 foot depth. Designed for years of trouble-free operation and simple, swift, on-site servicing.

*Flow @ 30 PSI HP/Volts

FW CPJ05S 12.7 GPM FW CPJ07S 15.2 GPM

Jet Pumps

Wt. Lbs. 24 24 29 33 34 43 29 33 28 31 42 66 64

Sta-Rite Jet Pumps are an ideal choice for water booster systems in car washes, farms, home, etc. Designed for use in shallow well pumping systems (to 25' lift) or in foam brush, presoak and tire HNC D cleaner applications. All pumps are standard with adjustable pressure switches with shut-off pressures to 70 psi (no pressure switch on CJ models). Available with cast iron, stainless or plastic bodies.

RETAIL $ 645.88 628.46 755.76 842.86 1226.10 1143.02 781.22 774.52 1051.90 1145.70 1368.14 1837.14 2054.22

Standard Features “H” Series: Cast Iron Bodies • Noryl Impellers • Stainless steel shaft • Buna Seals • UL & CSA Listed • 1-1/4" Inlet, 1" Outlet. PN

Part No. Flow Rate HP Volts

1/2 1/2 1/2 1/2 1/2 1/2

115 230 115 230 115 230

Standard Features “P” Series: Plastic Bodies • Fiberglass reinforced thermoplastic body • Polycarbonate Impeller • Stainless shaft & heavy-duty bearings • Buna Seal • 1-1/4" Inlet, 3/4" Outlet.

Sta-Rite Stainless Steel Submersible Pumps are designed for underground tanks or cisterns. Ideal for use with RO Spot Free Water Systems. Shaft, coupling and shell are 300 grade stainless steel construction. Intake and discharge fittings are fiberglass reinforced thermoplastic. All pumps are 1/2 Hp and come standard with 10’ power cord. Dimensions are 3-7/8” diameter x 21” long. Weight is 16 lbs. Motors are 115 or 230 volt, single phase. 1-1/4” FPT discharge.

10 GPM @ 75 PSI 10 GPM @ 75 PSI 14 GPM @ 50 PSI 14 GPM @ 50 PSI 20 GPM @ 50 PSI 20 GPM @ 50 PSI

RETAIL

Stainless Submersible Well Pumps

SA 10DM5121 SA 10DM5221 SA 20DM5121 SA 20DM5221 SA 25DM5121 SA 25DM5221

Wt.

52 lbs. $ 738.34 58 lbs. 880.38

* Based on 15' depth to water.

* Pump Units do not include control box, which must be ordered separately, if needed.

Max. PSI

1/2 (115-230V) 69 3/4 (115-230V) 65

5. Stainless steel suction screen covers a large round suction inlet.

*1-Ph Motors Part No. HP Volts GPM @ Head FW 4F10S05-005 1/2 115 10 GPM @ 170' FW 4F10S05-305 1/2 230 10 GPM @ 170' FW 4F10S07-305 3/4 230 10 GPM @ 260' FW 4F10S10-305 1 230 10 GPM @ 310' FW 4F07S10-305 1 230 7 GPM @ 410' FW 4F10S15-305 1-1/2 230 10 GPM @ 425' FW 4F19S07-305 3/4 230 19 GPM @ 125' FW 4F19S10-305 1 230 19 GPM @ 205' FW 4F27S07-305 3/4 230 27 GPM @ 100' FW 4F27S10-305 1 230 27 GPM @ 115' FW 4F19S20-301 2.0* 230 13 GPM @ 410' FW 4F19S30-301 3.0* 230 18 GPM @ 445' FW 4F27S30-301 3.0* 230 20 GPM @ 425'

CPJS Pump Features: High Tensile Gray Iron Pump Bodies with large cavities for fast, easy priming • Double Ball Bearing, Dual-Voltage Motors • Buna-N Quadraseal for positive seal between pump case and motor bracket • Corrosion & Abrasion Resistant Diffusers • Thermoplastic Celcon Impellers • Carbon & Ceramic Self-adjusting Shaft Seals • All plugs are coated with non-hardening, non-corrosive materials for easy removal if necessary • 1-1/4" FPT Inlet, x 3/4" FPT outlet • Pressure Switch preset at 30-50 psi. Part No.

4. 304 Stainless Steel Pump shell threaded on both ends for easy attachment to discharge head & mounting ring.

CPJS Style

CALL FOR PRICING

Standard Features “CJ” Series: 304 Stainless Bodies • Noryl Impellers • Buna seals • 1-1/4" MPT Inlet, 1" FPT Outlet. Note: Pressure switch is not included.

*Flow @ Max. Shut-Off Part No. 30 PSI Flow PSI** Body 1-Phase Motors SA HNC 11.6 gpm 15.0 70 Cast Iron 1/2 hp, 115/230 V SA HND 16.5 gpm 21.4 67 Cast Iron 3/4 hp, 115/230 V SA HNE 21.4 gpm 28.5 67 Cast Iron 1 hp, 115/230 V SA PNC 8.5 gpm 8.6 77 Plastic 1/2 hp, 115/230V SA PND 12.0 gpm 12.8 77 Plastic 3/4 hp, 115/230 V SA PNE 18.0 gpm 21.0 67 Plastic 1 hp, 115/230 V SA CJ90E 14.1 gpm 17.8 63 S.S. 1 hp, 115/230V SA CJ90F 14.5 gpm 18.6 80 S.S. 1-1/2 hp, 115/230V * Based on 15' depth to water. ** Shut Off PSI at 5' depth to water.

Wt. 47 lbs. 55 lbs. 60 lbs. 22 lbs. 25 lbs. 27 lbs. 26 lbs. 29 lbs.

CALL FOR PRICING

Determine the Flow Rate of Your Pump in Gallons Per Hour • Choose Your Pressure Switch Setting • Select the Tank from the Chart Below with Drawdown at Your Chosen Switch Setting that is Equal to or Above Your Pump GPH. Pump GPH 240 300 360 420 480 540 600 720 840 960 1080 1200 1320 1500 1800 2100 2400 2700 3000 3600 4800 6000 7200 Tank Breakdown* 4 5 6 7 8 9 10 13 17 20 25 30 36 44 60 70 80 90 100 120 160 200 240 Gallons * The amount of usable water discharged between pump cycles of an automatic water system. DULTMEIER SALES • OMAHA, NE

(800) 228-9666

•

www.dultmeier.com

• DAVENPORT, IA

(800) 553-6975

E0279

Water Pressure Booster Pumps Pressure Booster Pumps

Booster Pumps

Pressure Booster Pumps for a wide variety of pumping applications. Ideal for increasing rinse water pressure, liquid transfer, spot-free water re-pressurization, lawn sprinkler and many others. Standard construction is Stainless Steel or Cast Iron. (Not self-priming). Maximum temperature is 160° F. - water only.

APPLICATION FOR:

• Residential, commercial or agricultural pressure wash • Reverse osmosis • Evaporative cooling systems/misters • Booster Service

203

• Spray systems • Water circulation • Filtration • HVAC • General purpose pumping

Sta-Rite Pressure Booster Pumps are an ideal choice for boosting water pressures for washing, RO rinse water and general purpose pumping. Patented, Multi-stage design. Carbon/Ceramic/Buna shaft seals. Stainless steel pump and motor shaft. Cast iron or Stainless steel inlet and outlet ports. Rated to 140° F. and 80 PSI inlet pressure. (Not self-priming).

D D

Motors are 60HZ, 3500 RPM, TEFC, and are available in either single phase, 115/230 volt or three phase, 208/230/460 volt. (3 Phase motors are TEFC premium efficiency). Cast Iron Pumps feature cast iron inlet and discharge fittings and 304SS stainless pump shell. Mechanical seal and BUNA elastomers are standard. Stainless Steel pumps feature 304SS stainless steel inlet and discharge fittings and pump shell. Mechanical seal and Viton® elastomers are standard. Part No. Castings Motor Ports *Flow Rate Wt. RETAIL GL 7GBC1014RO Cast Iron 1hp, 1ph 1" FPT 5 GPM @ 180 PSI 65 lbs. $ 1011.70 GL 7GBS1014R4 Stainless 1hp, 1ph 1" FPT 5 GPM @ 180 PSI 65 lbs. 1368.14 GL 10GBC1514QO Cast Iron 1.5hp, 1ph 1" FPT 8 GPM @ 180 PSI 56 lbs. 1106.84 GL 10GBS1514Q4 Stainless 1.5hp, 1ph 1" FPT 8 GPM @ 180 PSI 56 lbs. 1342.68 GL 10GBC2014SO Cast Iron 2hp, 1ph 1" FPT 12 GPM @ 180 PSI 73 lbs. 1286.40 GL 10GBS2014S4 Stainless 2hp, 1ph 1" FPT 12 GPM @ 180 PSI 73 lbs. 1464.62 GL 10GBC2017SO Cast Iron 2hp, 3ph 1" FPT 12 GPM @ 180 PSI 64 lbs. 1453.90 GL 10GBS2017S4 Stainless 2hp, 3ph 1" FPT 12 GPM @ 180 PSI 64 lbs. 1551.72 GL 18GBC2014NO Cast Iron 2hp, 1ph 1" FPT 15 GPM @ 150 PSI 73 lbs. 1155.08 GL 18GBS2014N4 Stainless 2hp, 1ph 1" FPT 15 GPM @ 150 PSI 73 lbs. 1417.72 GL 18GBC2017NO Cast Iron 2hp, 3ph 1" FPT 15 GPM @ 150 PSI 64 lbs. 1263.62 GL 18GBS2017N4 Stainless 2hp, 3ph 1" FPT 15 GPM @ 150 PSI 64 lbs. 1542.34 GL 18GBC3014QO Cast Iron 3hp, 1ph 1" FPT 22 GPM @ 130 PSI 77 lbs. 1507.50 GL 18GBS3014Q4 Stainless 3hp, 1ph 1" FPT 22 GPM @ 130 PSI 77 lbs. 1770.14 GL 18GBC3017QO Cast Iron 3hp, 3ph 1" FPT 22 GPM @ 130 PSI 65 lbs. 1817.04 GL 18GBS3017Q4 Stainless 3hp, 3ph 1" FPT 22 GPM @ 130 PSI 73 lbs. 1969.80 GL 45HB25013 † Cast Iron 5hp, 1ph 2" FPT 30 GPM @ 115 PSI 147 lbs. 4314.80 GL 45HB25035 Cast Iron 5hp, 3ph 2" FPT 30 GPM @ 115 PSI 99 lbs. 3033.76 GL 45HB27535 Cast Iron 7.5hp, 3ph 2" FPT 50 GPM @ 125 PSI 150 lbs. 3514.82 GL 45HB21135 Cast Iron 10hp, 3ph 2" FPT 60 GPM @ 125 PSI 190 lbs. 3997.22 *Flow rates can be increased if discharge pressure is decreased. Pump curves available on request. † 208/230 V.

Booster Pumps Flint & Walling Pressure Booster Pumps are ideal for increasing water pressure from city mains or private water systems. Also a good choice for reverse osmosis systems, spray or misting units, water circulation and general purpose pumping. Available in cast iron, powder-coated cast iron and stainless steel construction. Motors are 1 Phase or 3 Phase, ODP/60Hz. (50Hz and TEFC motors also available). Cast iron pumps feature Buna shaft seals, stainless pumps have Viton® seals. Noryl impellers and diffusers are standard on all models.

Motors are ODP (TEFC available on request). All single phase motors to 2 HP are 115/230 volt. All pumps feature 3/4" FPT inlet and outlet except for HP20 series which are 1" FPT. 3-HP 1-Phase Motors are 208/230 volt. All 3-HP 3-Phase Motors are 208/230/460 volt. Part No. SA HP10D SA HP10E SA HP7E SA HP10FMS SA HP10G SA HP10G3 SA HP20G SA HP20G3 SA HP20H SA HP20H3 SA HPS7E SA HPS10FMS SA HPS10GMS SA HPS10G3 SA HPS20GMS SA HPS20G3 SA HPS20H SA HPS20H3 SA HP30H SA HP30H3 SA HPS30H SA HPS30H3

Ports Motor 3/4" Cast Iron 3/4 hp, 1 ph 3/4" Cast Iron 1 hp, 1 ph 3/4" Cast Iron 1 hp, 1 ph 3/4" Cast Iron 1.5 hp, 1 ph 3/4" Cast Iron 2 hp, 1 ph 3/4" Cast Iron 2 hp, 3 ph 1" Cast Iron 2 hp, 1 ph 1" Cast Iron 2 hp, 3 ph 1" Cast Iron 3 hp, 1 ph 1" Cast Iron 3 hp, 3 ph 3/4" Stainless 1 hp, 1 ph 3/4" Stainless 1.5 hp, 1 ph 3/4" Stainless 2 hp, 1 ph 3/4" Stainless 2 hp, 3 ph 1" Stainless 2 hp, 1 ph 1" Stainless 2 hp, 3 ph 1" Stainless 3 hp, 1 ph 1" Stainless 3 hp, 3 ph 1-1/4" Cast Iron 3 hp, 1 ph 1-1/4" Cast Iron 3 hp, 3 ph 1-1/4" Stainless 3 hp, 1 ph 1-1/4" Stainless 3 hp, 3 ph

Flow Rate 10 GPM @ 100 PSI 10 GPM @ 125 PSI 6 GPM @ 180 PSI 8 GPM @ 180 PSI 10 GPM @ 180 PSI 10 GPM @ 180 PSI 15 GPM @ 155 PSI 15 GPM @ 155 PSI 20 GPM @ 195 PSI 20 GPM @ 195 PSI 6 GPM @ 180 PSI 8 GPM @ 180 PSI 10 GPM @ 180 PSI 10 GPM @ 180 PSI 15 GPM @ 155 PSI 15 GPM @ 155 PSI 20 GPM @ 155 PSI 20 GPM @ 155 PSI 30 GPM @ 125 PSI 30 GPM @ 125 PSI 30 GPM @ 125 PSI 30 GPM @ 125 PSI

Wt. 46 lbs. 50 lbs. 51 lbs. 58 lbs. 63 lbs. 59 lbs. 62 lbs. 58 lbs. 59 lbs. CALL 55 lbs. FOR 51 lbs. PRICING 58 lbs. 63 lbs. 59 lbs. 62 lbs. 58 lbs. 59 lbs. 55 lbs. 59 lbs. 55 lbs. 59 lbs. 55 lbs.

FPT * Flow Part No. Material Motor Ports Rate FW PB0512C051 Powder Cast 1/2 hp, 1 ph 3/4” 4 GPM @ 100 PSI FW PB0512S051 Stainless 1/2 hp, 1 ph 3/4” 4 GPM @ 100 PSI FW PB0516C071 Powder Cast 3/4 hp, 1 ph 3/4” 4.6 GPM @ 140 PSI FW PB0516S071 Stainless 3/4 hp, 1 ph 3/4” 4.6 GPM @ 140 PSI FW PB1014A101 Cast Iron 1 hp, 1 ph 3/4” 6 GPM @ 160 PSI FW PB1014C101 Powder Cast 1 hp, 1 ph 3/4” 6 GPM @ 160 PSI FW PB1014S101 Stainless 1 hp, 1 ph 3/4” 6 GPM @ 160 PSI FW PB1016A151 Cast Iron 1-1/2 hp, 1 ph 3/4” 8 GPM @ 160 PSI FW PB1016C151 Powder Cast 1-1/2 hp, 1 ph 3/4” 8 GPM @ 160 PSI FW PB1016S151 Stainless 1-1/2 hp, 1 ph 3/4” 8 GPM @ 160 PSI FW PB2711C201 Powder Cast 2 hp, 1 ph 1” 13 GPM @ 140 PSI FW PB2711C203 Powder Cast 2 hp, 3 ph 1” 13 GPM @ 140 PSI FW PB2711S201 Stainless 2 hp, 1 ph 1” 13 GPM @ 140 PSI FW PB2711S203 Stainless 2 hp, 3 ph 1” 13 GPM @ 140 PSI FW PB2714A301 Cast Iron 3 hp, 1 ph 1” 19 GPM @ 160 PSI FW PB2714A303 Cast Iron 3 hp, 3 ph 1” 19 GPM @ 160 PSI FW PB2714S301 Stainless 3 hp, 1 ph 1” 19 GPM @ 160 PSI FW PB2714S303 Stainless 3 hp, 3 ph 1” 19 GPM @ 160 PSI FW PB2717S303A Stainless 3 hp, 3 ph 1” 17 GPM @ 200 PSI

Wt. Lbs. 39 39 44 44 48 48 48 53 53 53 56 56 56 56 57 56 57 56 60

RETAIL $ 573.52 838.84 682.06 948.72 632.48 787.92 947.38 716.90 868.32 1104.16 791.94 848.22 1148.38 1227.44 893.78 923.26 1270.32 1311.86 1231.46

* Add pressure rates to incoming water pressure for total output pressure, I.E. if incoming pressure is 50 PSI, PB0516 Series will deliver 190 PSI output. Viton® is a registered trademark of DuPont Performance Elastomers

IND

DULTMEIER SALES • OMAHA, NE

(800) 228-9666

•

www.dultmeier.com

• DAVENPORT, IA

(800) 553-6975

E0280

Vacuum Pumps

204

Liquid Waste Vacuum Units

Vacuum Pumps Conde Vacuum Pumps are rated from 35 to 230 CFM. Designed for tanks from 50 to 2500 gallons. Available in Vacuum only or Vacuum/Pressure models. Vacuum only pumps are an economical option when pressure is not required for off-loading. All units can be driven by a variety of sources such as gas engine, PTO, hydraulic, gear box or 12 volt clutch. All pumps are available for clockwise or counterclockwise rotation as noted. Pumps shown below come standard with automatic oilers that require no adjustments. Compact, low profile design allows for ease-of-installation. Sealed bearings require no maintenance. All pumps are rated to 28” of intermittent vacuum and 20” continuous vacuum. Pumps with pressure option are rated to 20 PSI discharge. Pro3, Super6 and SDS6 models include vacuum relief valves. All pumps are tested prior to shipping and carry a 1-Year Warranty. (Specify tapered shafts if clutch drive is required).

Conde Vacuum Only or Vacuum/Pressure Power Packs. Available in Honda gas engines in Direct Drive or Pulley Drive models (except SDS12 units which are only belt drive). Easy to install and ready to go, just bolt down and attach to your tank. Diamond plate bases and belt guards ensure great look and wear life. Easily transferred between vehicles if needed. Standard Features: Honda GX gas engines with electric start • Diamond Plate baseplates and belt guards • Rigid assembly for minimum vibration and maximum power • Vacuum only or Vacuum/ Pressure models • Wide range of CFM sizes to match your needs • Direct drive models have a centrifugal clutch for no load start up and idle. Note: Diesel engine units also available.

SDS 12 Power Pak Pulley Drive Ideal for tanks sizes 1000 - 2000 gallons

SPECIFICATIONS PUMP SERIES Speed Range Shaft Size Port Size Ideal Tank Size Pro3 1200-1750 3/4” 1” 50-300 Gallon Super6 1200-1750 1” 1-1/4” 300-500 Gallon SDS6 1200-1750 1” 1-1/2” 500-1000 Gallon SDS12 1200-1750 1-1/8” 1-1/2” 1000-2000 Gallon ULTRA12 1200-1750 1-1/8” 1-1/2” 1200-2500 Gallon PRO3 SUPER6 Vacuum Only Vacuum Only - 70 CFM - 35 CFM -

Vacuum Only Pumps

Part No. CO OL3PW CO OL3PC CO OL6SW CO OL6SC CO OL6SDSW CO OL6SDSC CO OL12SDSW CO OL12SDSC CO OL12ULW CO OL12ULC

ESTIMATED TANK PULL DOWN TIME (15” Hg) TANK SIZE SDS12 SDS6 Super6 ProVac3 100 Gallon - - 8 sec. 16 sec. 200 Gallon - - 17 sec. 37 sec. 300 Gallon - - 25 sec. 50 sec. 400 Gallon - - 34 sec. 64 sec. 500 Gallon 16 sec. 26 sec. 52 sec. 84 sec. 750 Gallon 24 sec. 40 sec. - 1000 Gallon 32 sec. 53 sec. - 1500 Gallon 50 sec. 80 sec. - 2000 Gallon 67 sec. 106 sec. -

Ideal for tanks from 300 - 500 gallons

Ideal for tanks from 50 - 300 gallons

Pump Series Pro3 Pro3 Super6 Super6 SDS6 SDS6 SDS12 SDS12 Ultra12 Ultra12

Vacuum 35 cfm 35 cfm 70 cfm 70 cfm 115 cfm 115 cfm 190 cfm 190 cfm 230 cfm 230 cfm

Rotation Clockwise Counterclock Clockwise Counterclock Clockwise Counterclock Clockwise Counterclock Clockwise Counterclock

SDS6 & SDS12 Vacuum/Pressure - 115 CFM -

Super 6 Power Pak Direct Drive Ideal for tanks sizes 300 - 500 gallons

Wt. RETAIL 40 lbs. $ 1098.80 40 lbs. 1098.80 80 lbs. 1595.94 80 lbs. 1595.94 100 lbs. 1798.28 100 lbs. 1798.28 150 lbs. 2131.94 150 lbs. 2131.94 160 lbs. 2560.74 160 lbs. 2567.44

Part No. CO OL3P5D CO OL305ES CO HD3P5D CO HD305ES CO OL6SS5D CO OL6SS5ES CO HD6SS5D CO HD6SS5ES CO OL6SD9D CO OL6SDS9E CO HD6SD9D CO HD6SDS9E CO OL12SD13 CO HD12SD13

ULTRA12 Vacuum/Pressure - 230 CFM -

Pump Pump Drive/ Series Style Engine Pro3 Vac Only 5.5 HP Direct Pro3 Vac Only 5.5 HP Pulley Pro3 Vac/Pressure 5.5 HP Direct Pro3 Vac/Pressure 5.5 HP Pulley Super6 Vac Only 5.5 HP Direct Super6 Vac Only 5.5 HP Pulley Super6 Vac/Pressure 5.5 HP Direct Super6 Vac/Pressure 5.5 HP Pulley SDS6 Vac Only 9.0 HP Direct SDS6 Vac Only 9.0 HP Pulley SDS6 Vac/Pressure 9.0 HP Direct SDS6 Vac/Pressure 9.0 HP Pulley SDS12 Vac Only 13 HP Pulley SDS12 Vac/Pressure 13 HP Pulley

CFM 35 35 35 35 70 70 70 70 115 115 115 115 180 180

Wt. RETAIL 145 lbs. $ 2442.82 150 lbs. 2255.22 150 lbs. 2714.84 165 lbs. 2595.58 225 lbs. 3135.60 225 lbs. 2988.20 230 lbs. 3493.38 230 lbs. 3205.28 270 lbs. 4223.68 270 lbs. 3898.06 280 lbs. 4601.56 280 lbs. 4222.34 330 lbs. 4987.48 340 lbs. 5313.10

Typical Vacuum Tank Diagram

Ideal for tanks from 500 - 1000 gallons

Vacuum/Pressure Pumps

Part No. CO HD3PW CO HD3PC CO HD6SW CO HD6SC CO HD6SDSW CO HD6SDSC CO HD12SDSW CO HD12SDSC CO HD12ULW CO HD12ULC

IND

Pump Series Vacuum Pressure Pro3 35 cfm 20 PSI Pro3 35 cfm 20 PSI Super6 70 cfm 20 PSI Super6 70 cfm 20 PSI SDS6 115 cfm 20 PSI SDS6 115 cfm 20 PSI SDS12 190 cfm 20 PSI SDS12 190 cfm 20 PSI Ultra12 230 cfm 20 PSI Ultra12 230 cfm 20 PSI

Ideal for tanks from 1200 - 2500 gallons

Rotation Clockwise Counterclock Clockwise Counterclock Clockwise Counterclock Clockwise Counterclock Clockwise Counterclock

DULTMEIER SALES • OMAHA, NE

Wt. RETAIL 40 lbs. $ 1543.68 40 lbs. 1543.68 80 lbs. 1811.68 80 lbs. 1803.64 100 lbs. 2047.52 100 lbs. 2044.84 150 lbs. 2338.30 150 lbs. 2338.30 160 lbs. 2756.38 160 lbs. 2757.72

(800) 228-9666

Ref.# Description

•

1 2 3 4 5 6 7

www.dultmeier.com

Primary Shutoff Secondary Shutoff Final Filter Pump Stand Assembly Horizontal Oil Catch Muffler Vertical Oil Catch Muffler Brass Valve

• DAVENPORT, IA

Ref.# Description 8 9 10 11 12 13 14

36” Manway 5” Sight Eye Assembly 3” Sight Eye Assembly 2” Sight Eye Assembly Vacuum Tank Manways Load Level Indicator

(800) 553-6975

E0824

Jurop Vacuum Pumps

205

Jurop PN Series Vacuum Pumps Used Mainly on Slurry Tankers or Suction Units at Intermittent Use

Optional Accessories

High Quality PN Series Vacuum Pumps from Jurop. This pump series is mainly used on slurry tankers or suction units at intermittent use. Standard Features Include: Change-over valve for vacuum or pressure • Oil pump and reservoir for forced lubrication • Air cooled design • Rated from 900 - 1300 RPM, (540 RPM models also available) • 95% Efficient • Maximum vacuum to 27-1/2” • Heat resistant valves • 1-3/8” Drive shaft • (2) 3” Swivel elbows • 21 PSI pressure output (intermittent). PN23 and PN33 models are designed for 0-1000 gallon standard duty applications. PN58 and PN84 models are designed for 1000-2500 gallon standard duty applications.

Pump Packs Shown on Following Pages

Part No. CB PN23-CW Pump, Clockwise CB PN23-CCW Pump, Counter Clockwise CB PN58 Pump, Clockwise CB PN58-CCW Pump, Counter Clockwise CB PN84-CW Pump, Clockwise CB PN84-CCW Pump, Counter Clockwise CB 1893000225 Complete Repair Kit, PN23 CB 1893000245 Complete Repair Kit, PN58 CB 1893000260 Complete Repair Kit, PN84

PN58

Free Max. HP CFM PSI Required Wt. RETAIL 92 21 4-1/2 117 lbs. $ 2014.02 92 21 4-1/2 117 lbs. 2014.02 230 21 9 225 lbs. 2625.06 230 21 9 225 lbs. 2781.84 317 21 15 254 lbs. 3095.40 317 21 15 254 lbs. 3095.40 .............................................................. 125.29 .............................................................. 324.28 .............................................................. 510.54

Jurop R Series Vacuum Pumps Designed for 2,000 to 6,000 Gallon Heavy Duty Applications High Quality R Series Vacuum Pumps from Jurop

R260

Standard Features Include: Automatic lubrication • Continuous duty pumping at 18” vacuum • Ballast port cooling • Heat resistant Kevlar Valves • Built-in oil reservoir • 21 PSI intermittent pressure output • 900-1200 RPM • Change-over valve for vacuum or pressure • 27-1/2” Vacuum rating • 1-3/8” shaft • (2) 3” Swivel elbows. R Models are designed for 2000-6000 gallon heavy duty applications. Free HP Part No. CFM Required Wt. CB R260-CCW Pump Only, Counter Clockwise 363 18 397 lbs. CB R260-CW Pump Only, Clockwise 363 18 397 lbs. CB 1893000320 Complete Rebuild Kit..............................................................

RETAIL $ 4633.72 4633.72 852.24

Jurop LC Series Vacuum Pumps

Pump Packs Shown on Following Pages

Vacuum Pump Oil

Designed for Continuous Duty at Deep Vacuum High Quality LC Series Vacuum Pumps from Jurop Standard Features Include: Water cooled from truck engine • Automatic oil lubrication • Built-in filter • 27” Maximum vacuum (25” continuous) • 29 PSI intermittent pressure output • 1000-1300 RPM • Change-over valve for vacuum or pressure • 1-3/8” shaft • (2) 3” Swivel elbows. LC Models are designed for 2000-8000 gallon heavy duty applications.

ISO 150 Vacuum Pump Oil. Special formulation resists foaming and sludge/varnish formation. Extends o-ring and seal life. Excellent anti-wear protection. Quickly displaces water. Sold in 1 gallon pails. (Wintergreen scent). D

Part No. Size Wt. RETAIL CB 150-1 1 Gallon 8 lbs. $ 36.72

Shown with Optional Final Filter

LC300

5% Discount for Case of 6 Gallons.

LC420

To Deliver the Best Possible Service

to Our Customers,

Dultmeier Sales Pump Packs Also Available Call for Pricing!

Part No. CB LC300-CCW CB LC300-CW CB LC420-CCW CB LC420-CW CB 1893000450 CB 1893000440

IND

Free HP CFM Required Wt. Pump Only, CCW 300 17 430 lbs. Pump Only, CW 300 17 430 lbs. Pump Only, CCW 425 23 462 lbs. Pump Only, CW 425 23 462 lbs. Complete Rebuild KIt, LC300................................ Complete Rebuild Kit, LC420................................ DULTMEIER SALES • OMAHA, NE

Strives to Live Up to RETAIL $ 4341.60 4341.60 5250.12 5250.12 828.12 865.64

(800) 228-9666

A Set of Core Values, One of Which is to Be “Customer Focused”

•

www.dultmeier.com

• DAVENPORT, IA

Partnering to meet and exceed customer expectations

(800) 553-6975

E0812

Vacuum Pump/Tank Accessories

206

Air Pressure Relief Valves

Manway Hatches Heavy-Duty Manway Hatches for vacuum tanks. Available in 12” or 20” diameter (other sizes also available). Steel construction features 1/4” weldable base. Neck lengths are 6” or 12” deep. Lids are standard with gasket and wing nuts. (Stainless and aluminum hatches also available - Call for Pricing). Gasket In Lid

• For Vacuum Tanks & Pumper Trucks • Brass • Sizes from 1-1/4” to 2” MNPT • Air Rating from 155 to 300 CFM • Fully Adjustable Max. Part No. Size CFM CB 1048 1-1/4” 155 CB 1049 1-1/2” 230 CB 1050 2” 300

D D

10170H

10154H

• Adjustable • Durable Brass Construction

Heavy-Duty, 3-Shaft Gear Boxes are made to accommodate CW or CCW rotation of vacuum pumps. Features Bi-rotational angle drive, heavy gears and 1” or 1-14” shafts. 1-1 ratio models are shown, but 1-1.5 and 1-2 ratios are also available.

Wt. 7 lbs. 7.5 lbs. 8.5 lbs.

RETAIL $ 134.00 134.00 155.11

• 4” - 18” Vacuum Rating Part No. Size CB 1035 1-1/2”

Max. CFM 370

Wt. 1 lbs.

RETAIL $ 37.65

Vacuum/Pressure Tree

Part No. CB 1097-1000 CB 1097-1001 CB 1097-1002 CB 1097-1003 CB 1097-1004 CB 1097-1005

1/2” FPT Inlet D

• Rated to 370 cfm

Now you can have your vacuum relief valve, pressure relief valve and pressure gauge in one assembly for easy access and viewing.Tree and hose barbs are aluminum construction. Relief valves are brass. Available in 2”, 3” or 4” in aluminum tree only or complete as shown.

RETAIL $ 430.14 471.68

Aluminum DuckBill Nozzles are available with either 2”, 3” or 4” lever coupling. Nozzle base is 17” wide. Heavy duty, yet lightweight. Size 2” 3” 4”

• Port is 1-1/2” MNPT

DuckBill Nozzles

Part No. CB 20DB CB 30DB CB 40DB

• For Vacuum Tanks & Pumper Trucks

3-Shaft Gear Boxes

Part No. Shaft Wt. CB 1009 1” 13 lbs. CB 1006 1-1/4” 29 lbs.

RETAIL $ 44.22 52.26 66.06

Vacuum Relief Valve

Part No. Size Neck Wt. RETAIL CB 10150H 12” 6” 40 lbs. $ 253.26 CB 10154H 12” 12” 58 lbs. 332.32 CB 10170H 20” 6” 74 lbs. 332.32 CB 10174H 20” 12” 100 lbs. 448.90 CB 1010-0100 Plated Wing Nut Assembly..... 26.26 CB 1010-0100-316 Stainless Wing Nut Assembly. 57.62

Wt. 2 lbs. 2 lbs. 3 lbs.

Description Vacuum Tree Only......... Vacuum Tree Complete. Vacuum Tree Only......... Vacuum Tree Complete. Vacuum Tree Only......... Vacuum Tree Complete.

Size 2” 2” 3” 3” 4” 4”

Wt. RETAIL 8 lbs. $ 284.08 8 lbs. 347.06 8 lbs. 175.21 8 lbs. 296.14 8 lbs. 269.34 8 lbs. 317.58

Manhole Hook

Manhole Cleaners

30” 1/8” Nozzle Ports

High Pressure Rotary Cleaners for cleaning, restoration and service of manholes, lift stations and other long vertical drops. Stainless steel construction. Rated to 75 GPM, 2500 PSI and 250° F. Inlet is 1/2” FPT. Designed for (2) 1/8” MPT, zero or 5 degree nozzles matched to your pump output (Nozzles are sold separately, call for details). Available in a variety of diameters to meet your needs.

IND

Part No.

Size

MM 81037 MM 81047 MM 81057 MM 81067 MM 81087

12” Diameter 16” Diameter 20” Diameter 24” Diameter 32” Diameter

TP30R

Rotated Handle

Heat-Treated Manhole Hook features a unique tapered end for many size openings. Special rocker design makes “popping” covers easier. Oversized handle for a solid grip, even with gloves. 5/8” hex alloy steel is heat-treated for added durability. 30” length is standard, however other sizes are available.

Wt.

8.1 lbs. 8.0 lbs. 11.7 lbs. 14.0 lbs. 17.0 lbs.

DULTMEIER SALES • OMAHA, NE

Part No.

CALL for PRICING

(800) 228-9666

TT TP30R

•

www.dultmeier.com

Wt.

Manhole Hook, Rotated Handle 4.2 lbs.

• DAVENPORT, IA

(800) 553-6975

RETAIL

$ 41.54

E0892

Vacuum Tank Accessories Accessories

Oil Catch Mufflers Oil Catch Mufflers are designed to quiet vacuum pump noise and capture pump oil. These units combine both functions into one unit. Horizontal Mufflers feature mounting feet that allow for direct mount to truck frames. Vertical Mufflers feature a unique cyclone intake and air baffle system. 1” Drain valve is also a standard feature on all units. Models below are built with 2”,3” or 4” O.D. fittings. (Male NPT fittings are also available if required). HorizontalDimensions:25-1/2” L x 14” W x 16” H on 3” and 32” L x 16” W x 18” H on 4” units. Vertical Dimensions: 6” L x 7-1/2” W x 17” H on 2” and 12” L x 12” W x 34” H on 3” and 4” units. No. 102400V features 3” female NPT top and side ports. Dimensions on this model are 12” L x 12” W x 22” H.

Unique Air-Intake Baffle System

Oil Catch Mufflers are designed to capture oil and muffle exhaust as it exits the pump. MF3 is rated up to 40 cfm. Construction is steel. MF3

Part No. Ports CO MF3 1” CO MF3612 1-1/2”

Compact Size for Easy Mounting

M1SS

NPT Ports Barb Ports

Oil Catch Muffler

Perforated Stainless Steel Mesh to Catch Oil & Quiet Pump 1” Ball Valve to Recover Trapped Oil

MF3612 is rated to 200 cfm. Construction is aluminum.

350 - 600 CFM Capacity

Expanded Metal Screen to Contain Inner Structure

Barb Ports

Secondary Moisture Trap

MF3612

Max. CFM 40 200

Wt. 15 lbs. 25 lbs.

Oil Catch Muffler

RETAIL $ 221.10 397.98

Secondary Moisture Trap is designed to remove moisture and debris that may get past the primary shut-off. M1SS features 1-1/2” FPT ports and stainless steel construction. Rated up to 250 cfm.

Part No. CO M1SS D

207

Ports 1-1/2”

Max. CFM 200

Wt. 23 lbs.

RETAIL $ 475.70

Primary Shutoffs (Low Profile)

102201V

* 102400V (NPT)

Part No. Type Size CB 10100MH Horizontal 3” CB 10105MH Horizontal 4” CB 102201V Vertical 2” CB 102400V Vertical * 3” CB 102600V Vertical 3” CB 102601V Vertical 4”

102600V

CFM 350 520 130 400 600 600

Compact, Heavy-Duty Primary Shutoffs minimize overall vacuum tank height, (only 7-1/4” high). Positive shutoff with 6” stainless steel ball. Easy access for quick clean out. Zinc-plated hardware. Steel weldable base is 12-1/4” O.D. Neck length is 6”.

Wt. RETAIL 56 lbs. $ 544.04 90 lbs. 785.24 15 lbs. 254.60 50 lbs. 448.90 59 lbs. 506.52 61 lbs. 495.80

104901 Part No. * Type Neck CFM CB 104900 3” Tube 6” 385 * Can be Converted to 3” MPT with Weld Nipple.

Secondary Shutoffs Heavy-Duty Plastic Construction

Wt. 9 lbs. 9 lbs.

Mild Steel Secondary Shutoffs for vacuum trucks and tanks. Easy access design. D

Standard Features Include: 4” Stainless ball • Rubber seat • 2” Sight glass on 3” units only • 1” Drain valve • Gauge Fitting (gauge not included). Available in 2” O.D., 2 gallon or 3” O.D., 5 gallon sizes.

RETAIL $ 251.92 317.58 D

IND

CFM 400 700

Wt. 31 lbs. 55 lbs.

DULTMEIER SALES • OMAHA, NE

Dimensions: 2 Gallon: 9” L x 9” W x 18” H. 5 Gallon: 10-1/2” L x 10-1/2” W x 26” H.

1151

Mild Steel Final Filters for vacuum applications. Increase the vane life of your pumps. 50 Mesh, stainless filter element can handle high heat applications. Available in 2” to 6” sizes.

Part No. Size CB 1007-1003 3” FPT CB 1007-7 6” MPT

1153

Final Filters

Wt. RETAIL 60 lbs. $ 423.44

Secondary Shutoffs

Heavy-Duty, Nylon Secondary Shutoffs for vacuum applications. Available with 2” or 3” barbs. Rated to 70 PSI. Standard with 3/4” drain valve. Clear bowl design for easy viewing.

Part No. Size CFM CB 1047 2” 247 CB 1148 3” 353

Part No. Opening CB 1151 2” CB 1014-0901 3”

CFM 130 350

Wt. 21 lbs. 40 lbs.

RETAIL $ 341.70 477.04

RETAIL $ 448.90 586.92

(800) 228-9666

•

www.dultmeier.com

• DAVENPORT, IA

(800) 553-6975

E0813

Jurop Power Packs

208

Jurop Power Paks - Engine Driven Engine Driven Jurop Pumps featuring Vacuum and Pressure capabilities. All units are pre assembled and ready-to-install on your truck or tank. Standard Features Include: Electric start Honda or Kohler gas engines • Powder-coated, steel baseplate and belt guards • Pulleys and belts • 12-Volt battery • Pressure relief valve • Vacuum relief valve • Vacuum/Pressure gauge • Changeover valves for Pressure or Vacuum • Swivel elbows.

PM23VP1

PM260VP1

Part No. DU PM23VP1 DU PM58VP1 DU PM84VP1 DU PM260VP1

Pump PN23 PN58 PN84 R260

CFM 90 229 318 364

Engine Base RETAIL 8 HP, Honda Painted $ 4976.76 13 HP, Honda Painted 5636.04 20 HP, Kohler Painted 8228.94 25 HP, Kohler Painted 11036.24

Jurop Power Paks - Gear Box Driven Jurop Pumps with Gear Box Drive. For Vacuum and Pressure. All units are pre-assembled and ready for hookup. Juro-Paks Feature: Pump • Gear box • Secondary filter • Final filter • Pressure relief valve • Vacuum relief valve • Gear box aligning bracket • Pressure/ Vacuum gauge • Swivel fittings (No muffler included). Razor-Paks Feature: Pump • Muffler • Gear box • Secondary filter • Final filter • Pressure relief valve • Vacuum relief valve • Gear box aligning bracket • Pressure/Vacuum gauge • Swivel fittings.

Part No. Pump CFM Ports RETAIL DU JP23 Juropak PN23 92 2” $ 4640.42 DU JP33 Juropak PN33 127 2” 4963.36 DU JP58 Juropak PN58 230 3” 5717.78 DU JP84 Juropak PN84 317 3” 5971.04 DU JP260 Juropak R260 363 3” 7777.36 DU JP420 Juropak LC420 420 3”, 4” 8616.20 DU RP84 Razorpak PN84 317 3” 6570.02 DU RP260 Razorpak R260 363 3” 8148.54 DU RP420 Razorpak LC420 420 3”, 4” 9066.44

RP260

JP260

Liquid Waste Pumpout Station Conde ProVac is an Industrial Liquid Waste Pumping System is ideal for grease trap pump-out and remote, tough-to-get to jobs. Extremely quiet yet pumps up to 120 gallons per minute. Built-in exhaust deodorizer keeps odor at a minimum. Simple switch design easily changes from vac-up to pump-out. Easy to maneuver, easy to maintain and built to last. Standard Features: Heavy-duty, aluminum construction • 35CFM Conde pump • Easy access controls • 24” Width fits through any door • 45” Height fits into standard cargo doors • Hand parking brake • Exhaust deodorizer • Retractable cord reel • Hose rack and tool holder • 2” x 10’ Hose with wand • 6” Cleanouts • Heavy-duty wheels and casters.

• • • •

SPECIFICATIONS: 1.5 HP/110 Volt Motor Draws 13.4 Amps, • Works On Any 15 Amp Service • 24” Wide x 45” High x 50” Long • Operating Vacuum, 16” hg. • Operating Pressure, 5 PSI

Tank Volume, 52 Gallons Air Volume, 35 CFM 25’ Power Cord Weight is 250 lbs.

Part No.

CO LWUNP60A

IND

ProVac PumpOut System

DULTMEIER SALES • OMAHA, NE

(800) 228-9666

Wt.

RETAIL

250 lbs. $ $ 6651.76 •

www.dultmeier.com

• DAVENPORT, IA

(800) 553-6975

E1085

Plunger Pumps

209

High Flow Models (7 to 100 GPM) Triplex Plunger Pumps from CAT PUMPS® are designed to deliver smooth, low pulsation flows at a wide variety of pressures and flow rates. Widely used in continuous-duty, high pressure applications including Car/Truck Wash, Industrial Cleaning, Pressure Washing, Reverse Osmosis, Water Misting and many more. CAT PUMPS® are the “Pumps with Nine Lives”. Standard Features include: High pressure seals that are lubricated and cooled by the solution being pumped • Oil-bath crankcase • Heat treated valves and seats • Forged brass or stainless steel manifolds • Solid ceramic plungers • Exclusive high pressure seal design • Rated from 140° to 160° F. depending on the model. Seal options up to 180° F. available • Wet ends can be serviced without entering the crankcase • Pumps are rated to 50 micron particles and 5-9 ph. Note: Mounting rails are not included and must be ordered separately except for 67 and 68 Series). High Flow Pumps are rated from 7 to 75 GPM. See following page for low flow models. Pump No. GPM PSI RPM

Inlet

Outlet

Shaft

Wt.

Mounting Rails

CC 650 7

3000

1000

3/4"

1/2"

30mm

44 lbs.

30613

CC 1560 8

4000

1140

1”

3/4”

30mm

43 lbs.

30613

CC 3801** 9

5000

825

1-1/2”

1”

35mm

170 lbs.

92674

CC 5CP6190 10

1200

1800

1/2”

3/8”

20mm

20 lbs.

30611

CC 1050 12/10

1800/2200 1150/960

3/4”

1/2”

30mm

44 lbs.

30613

3/4”

1/2”

30mm

44 lbs.

30613

1430

3/4”

1/2”

30mm

44 lbs.

30613

915

1-1/2”

3/4”

35mm

152 lbs.

92674

6000

940

3/4”

1/2”

35mm

124 lbs.

92674

10,000

600

1”

1/2”

45mm

377 lbs.

126604

2000

1725

1/2”

24mm

40 lbs.

30613

2000

1750

1/2”

24mm

40 lbs.

30613

CC 7CP6170 11

2000

1600

3/4”

3/8”

24mm

30 lbs.

30613

CC 1051** 12

1800

1150

3/4”

1/2”

30mm

44 lbs.

30613

CC 1580 12

3000

1180

3/4”

1/2”

30mm

60 lbs.

30613

CC 3811** 14

3000

800

1-1/2”

1”

35mm

170 lbs.

92674

CC 1530 15.5

1500

1450

1”

3/4”

30mm

55 lbs.

30613

CC 6801** 15

7000

600

2”

1-1/4”

45mm

335 lbs.

Included

CC 1540E 18

1200

1100

1”

1-1/4”

45mm

43 lbs.

30613

CC 2510 20

2000

1450

1-1/4”

3/4”

30mm

79 lbs.

30614

CC 3560 20

4000

1160

1-1/2”

1”

35mm

139 lbs.

92674

CC 3520 25

2000

870

1-1/2”

1”

35mm

139 lbs.

92674

CC 3521** 23

92674

CC 660 10

3000

1430

CC 660.3400† 10

3000

CC 3507 10

5000

CC 3550 10 CC 6810 10 CC 7CP6110 10.5 CC 7CP6110.3400† 10.5

2000

800

1-1/2”

1”

35mm

139 lbs.

CC 2530 25 1200

1025

1-1/4”

3/4”

30mm

79 lbs.

30614

CC 3570

3000

1080

1-1/2”

1”

35mm

139 lbs.

92674

CC 3535 36

1200

800

1-1/2”

1”

35mm

139 lbs.

92674

CC 3531** 36

1200

800

1-1/2”

1”

35mm

139 lbs.

92674

CC 6831** 40

2300

625

2”

1-1/4”

45mm

335 lbs.

Included Included

CC 6835

3000

625

1-1/2”

1”

45mm

355 lbs.

CC 3545 45

1000

765

1-1/2”

1”

35mm

139 lbs.

92674

CC 6747 48

2000

615

2”

1-1/2”

45mm

335 lbs.

Included

CC 6841K** 48

2000

615

2”

1-1/4”

45mm

335 lbs.

Included

CC 6760 60

1200

520

2”

1-1/4”

45mm

335 lbs.

Included

CC 6775 75

1200

650

2”

1-1/4”

45mm

335 lbs.

Included

45mm

364 lbs.

Included

CC 67102 100 1000 680 2-1/2” 2” ** Features Stainless Steel Manifolds. † Rated to 200° F., Run Dry Feature.

IND

DULTMEIER SALES • OMAHA, NE

(800) 228-9666

•

www.dultmeier.com

• DAVENPORT, IA

1050

1530

2530

3535

(800) 553-6975

E0913

Plunger Pumps

210

Low Flow Models (3 to 6 GPM) PUMPS® TRIPLEX

CAT PLUNGER PUMPS are designed to deliver smooth, low pulsation flows at a wide variety of pressures and flow rates. Widely used in continuous-duty, high pressure applications including Car/Truck Wash, Industrial Cleaning, Pressure Washing, Reverse Osmosis, Water Misting and many more. CAT PUMPS® are the “Pumps with Nine Lives”. Standard Features include: High pressure seals that are lubricated and cooled by the solution being pumped • Oil-bath crankcase • Heat treated valves and seats • Forged brass or stainless steel manifolds • Solid ceramic plungers • Exclusive high pressure seal design • Rated from 140° to 160° F. depending on the model. Seal options up to 180° F. available • Wet ends can be serviced without entering the crankcase. • Pumps are rated to 50 micron particles and 5-9 ph. Note: Mounting rails and mounting kits are not included and must be ordered separately). Low Flow pumps are rated from 3 to 6 GPM. See following page for high flow models.

D D

57 340 & 350

3CP

530 & 550

5CP2120 & 2140 240 & 270

310 Pump No. GPM PSI RPM

Inlet

Outlet

Shaft

Wt.

CC 230 2.3 1500 1725 CC 5CP4114CSS 3.2 4000 1725 CC 240 3.6 1200 1725 CC 270 4.2/3.5 1000/1500 1725/1420 CC 3CP1140 3.6 2200 1725 CC 3CP1140.3400† 3.6 2200 1725 CC 5CP3110CSS 3.6 3500 1750 CC 310 4.0 2200 950 CC 310B†† 4.0 2200 950 CC 310BQ@ 4.0 2200 950 CC 310S** 4.0 2200 950 CC 340 4.0 1800 1725 CC 340B†† 4.0 1800 1725 CC 5CP2120W 4.0 2500 950 CC 5CP2120W.3400† 4.0 2500 950 CC 5CP2120B†† 4.0 2500 950 CC 5CP2140W 4.0 2500 1750 CC 5CP2140B†† 4.0 2500 1750 CC 5CP4118CSS 4.2 4000 1725 CC 3CP1120 4.2 2200 1725 CC 3CP1120.3400† 4.2 2200 1725 CC 5CP3160CSS 4.3 3500 1750 CC 45 4.5 3500 1645 CC 5CP4120CSS 4.5 4000 1750 CC 57 4.5 4000 1285 CC 700 4.5 5000 1750 CC 5CP3120 4.8 3000 1750 CC 5CP3120.3400† 4.8 3000 1750 CC 350 5.0 1500 1725 CC 5CP2150W 5.0 2000 1725 CC 530 5.0 2500 1100 CC 550 5.0 3000 1415 CC 5CP5120 6.0 2500 1750 CC 5CP5120.3400† 6.0 2500 1750 CC 5CP5140 6.7 3000 1750 CC 56 5.5 3500 1210 CC 1570 6.0 6000 1350 CC 5CP6120 7.5/6.0 1200/1600 1750/1400

1/2" 1/2” 1/2” 1/2” 1/2” 1/2” 1/2” 1/2” 1/2” 1/2” 1/2” 1/2” 1/2” 1/2” 1/2” 1/2” 1/2” 1/2” 1/2” 1/2” 1/2” 1/2” 1/2” 1/2” 1/2” 1/2” 1/2” 1/2” 1/2” 1/2” 1/2” 1/2” 1/2” 1/2” 1/2” 1/2” 1/2” 1/2”

3/8" 3/8” 3/8” 3/8” 3/8” 3/8” 3/8” 3/8” 3/8” 3/8” 3/8” 3/8” 3/8” 3/8” 3/8” 3/8” 3/8” 3/8” 3/8” 3/8” 3/8” 3/8” 3/8” 3/8” 3/8” 3/8” 3/8” 3/8” 3/8” 3/8” 3/8” 3/8” 3/8” 3/8” 3/8” 3/8” 3/8” 3/8”

16.5mm 20mm 16.5mm 16.5mm 16.5mm 16.5mm 20mm 20mm 20mm 20mm 20mm 20mm 20mm 20mm 20mm 20mm 20mm 20mm 20mm 16.5mm 16.5mm 20mm 20mm 20mm 24mm 24mm 20mm 20mm 20mm 20mm 24mm 24mm 20mm 20mm 20mm 20mm 30mm 20mm

13 lbs. 20 lbs. 13 lbs. 15 lbs. 15 lbs. 15 lbs. 20 lbs. 20 lbs. 20 lbs. 20 lbs. 20 lbs. 20 lbs. 20 lbs. 20 lbs. 20 lbs. 20 lbs. 20 lbs. 20 lbs. 20 lbs. 20 lbs. 20 lbs. 20 lbs. 20 lbs. 20 lbs. 20 lbs. 20 lbs. 20 lbs. 20 lbs. 20 lbs. 20 lbs. 20 lbs. 20 lbs. 20 lbs. 20 lbs. 20 lbs. 20 lbs. 68 lbs. 20 lbs.

Mounting Kit

*30612 30659 *30612 30651*30612 *30612 *30612 *30612 30659*30611 30659*30611 30659*30611 30659*30611 *30611 *30611 30659*30611 30659*30611 30659*30611 *30611 *30611 30659 *30612 *30612 *30612 *30611 *30611 30660*30611 *30611 *30612 *30612 *30611 *30611 30660*30611 30660*30611 30659*30611 30659*30611 30659*30611 30660*30611 *30613 30660*30611

* Mounting Rails Only. ** Features Stainless Steel Sleeves in Manifold. † Rated to 200° F., Run Dry Feature. †† Manifold features Lifetime Warranty against washout. @ Anti-Washout / Quiet Version.

OPTIONAL MOUNTING KIT COMPONENTS

Call Toll-Free for Prices !

Current 30651 Includes 30612 mounting rails, 30246 pulley (5" diameter) & key and a 25130 shaft protector cover. 30659 Includes 30611 mounting rails, a 30633 pulley (8" diameter) and a 118672 shaft protector cover. 30660 Includes 30611 mounting rails, 30206 pulley (9.75" diameter), 43256 shaft protector cover, 33000 hub (24mm) and a 30067 key. IND

DULTMEIER SALES • OMAHA, NE

(800) 228-9666

•

www.dultmeier.com

• DAVENPORT, IA

(800) 553-6975

E0282

High Pressure Pumps

211

Direct Drive Plunger Pumps For Electric Motors

Close-Coupled Pump & Motor Units

Close-Coupled Pump and Motor Units from Cat Pumps® eliminate cumbersome belts and pulleys and the need for clumsy belt guards. At pressures up to 2000 PSI at 4 GPM, these units all incorporate the popular CAT PUMPS® CERAMIC PLUNGER PUMP.

D D

2SF

4SF

Direct Drive Plunger Pumps from Cat Pumps® are designed for direct mounting to 56C or 184TC C-face electric motors. All pumps feature brass manifolds. Designed to run at motor speeds of 1750 or 3450 RPM as noted. Triplex plunger pumps have 5/8”, 3/4” or 1-1/8” hollow shafts and come with mounting flanges. Ports are 1/2” inlet x 3/8” outlet. Pressure unloader valves are included. Rated to 140° F. but high temperature seals to 175° F. are available in most models. (Stainless manifold models are available in some flow rates). Required Part No. GPM PSI RPM Motor CC 4DX20ER 2.0 2000 3450 3 HP, 5/8” Shaft CC 4SP21ELR 2.1 2000 1750 3 HP, 5/8” Shaft CC 2SF22ES 2.2 2000 3450 3 HP, 5/8” Shaft CC 4DX27ER 2.7 2000 3450 3.7 HP, 5/8” Shaft CC 4SP29ELR 2.85 1200 1725 2.3 HP, 5/8” Shaft CC 4DX30ER 3.0 2000 3450 4 HP, 5/8” Shaft CC 2SF30GES 3.0 2000 3450 4 HP, 3/4” Shaft CC 2SF35ES 3.5 1500 3450 3.6 HP, 5/8” Shaft CC 2SF35GES 3.5 2000 3450 4.8 HP, 3/4” Shaft CC 4SF32ELS 3.2 3500 1725 8 HP, 1-1/8” Shaft CC 4SF40ELS 4.0 3500 1725 10 HP, 1-1/8” Shaft CC 4SF45ELS 4.5 3000 1725 9 HP, 1-1/8” Shaft CC 4SF50ELS 5.0 3000 1725 10 HP, 1-1/8” Shaft

Wt. 11 lbs. 11 lbs. 12 lbs. 11 lbs. 12 lbs. 11 lbs. 11 lbs. 12 lbs. 14 lbs. 27 lbs. 27 lbs. 27 lbs. 27 lbs.

Call Toll Free for Pricing

For Gas Engines

Direct Drive Plunger Pumps from Cat Pumps are designed for direct coupling to gasoline engines with 3/4” or 1” shafts as noted. Designed to run at engine speed of 3450 RPM. Brass manifolds and pressure unloader valves are included. Pump flange bolts directly to engine face for secure mounting. Ports are 1/2” inlet x 3/8” outlet. Rated to 140° F. but some models are available for temperatures to 175° F.

66DX40G1I

Wt. 12 lbs. 12 lbs. 12 lbs. 13 lbs. 27 lbs. 15 lbs. 27 lbs. 27 lbs. 27 lbs. 27 lbs.

Call Toll Free for Pricing

1200 1200 2000 2000

4 4 4 4

Electric Motor 230/460-Volt

Wt.

3 HP 1 Phase 3 HP 3 Phase 5 HP 1 Phase 5 HP 3 Phase

90 lbs. 90 lbs. 105 lbs. 105 lbs.

Call Toll Free For Prices

Direct Drive Pumps with Gear Reducers

For Gas or Diesel Engines

Required Part No. GPM PSI Gas Engine CC 740G1 2.8 5000 13 HP, 1” Shaft CC 3CP1120G 3.5 2200 8 HP, 3/4” Shaft CC 60G1 4.2 4000 18 HP, 1” Shaft CC 5CP3120G1 4.5 3500 16 HP, 1” Shaft CC 700G1 4.5 5000 20 HP, 1” Shaft CC 5CP5135CSSG1 5.0 3500 16 HP, 1” Shaft CC 5CP5140G1 5.5 3500 18 HP, 1” Shaft CC 5CP6120G1 6.7 1600 8 HP, 1” Shaft CC 56G1 8.0 2500 16 HP, 1” Shaft CC 5CP6190G1 8.7 1200 11 HP, 1” Shaft CC 7CP6110G1 10 2000 18 HP, 1” Shaft CC 7CP6170G1 12 1800 16 HP, 1” Shaft

Wt. 38 lbs. 22 lbs. 39 lbs. 27 lbs. 26 lbs. 32 lbs. 27 lbs. 26 lbs. 37 lbs. 27 lbs. 39 lbs. 39 lbs.

Call Toll Free for Pricing

(800) 228-9666

Clutches shown are priced less the pump

SHIPPING

DULTMEIER SALES • OMAHA, NE

CC 340BD31 CC 340BD33 CC 340BD51 CC 340BD53

Maximum PSI @ GPM

12-Volt Clutches work with flow switches or pressure switches to control operation of pumps. 12-Volt DC rating. High quality bearings, rotors and hubs for added life.

4DNX25GSI

IND

Part No.

12-Volt Pump Clutches

Required Part No. GPM PSI RPM Motor CC 4DNX25GSI * 2.5 3000 3450 7 HP, 3/4” Shaft CC 4DNX27GSI * 2.7 3000 3450 8 HP, 3/4” Shaft CC 3DX29GSI * 2.9 2500 3450 7 HP, 3/4” Shaft CC 2SF35GS 3.5 2000 3450 8 HP, 3/4” Shaft CC 66DX30G1I * 3.0 4000 3450 13 HP, 1” Shaft CC 4SPX32G1I * 3.2 3000 3450 9 HP, 1” Shaft CC 66DX35G1I * 3.5 4000 3450 13 HP, 1” Shaft CC 66DX40G1I * 4.0 4000 3450 16 HP, 1” Shaft CC 4SF45GS1 4.5 3000 3450 13 HP, 1” Shaft CC 4SF50GS1 5.0 3000 3450 16 HP, 1” Shaft * “I” Models Include Chemical Injectors.

Motors are Totally Enclosed, Fan Cooled, 1725 RPM and available in single and three-phase (Baldor Brand).

Direct Drive, Gear Reduction Plunger Pumps from Cat Pumps are designed to bolt directly to gas or diesel engines. Gear boxes allow pumps to run at slower speeds which extends pump life. Brass manifolds and built in pressure unloader valves are standard. Rated to 140° F. but high temperature seals to 175° F. are available in most models. Ports are 1/2” inlet x 3/8” outlet. (Most models are available with 1-1/8” shafts if required).

Direct Drive Plunger Pumps

•

Fits Part No. Grooves Shaft Diameter Pump Models CC 34961 1 16.5 mm 7” 3FR/3PFR/4FR CC 34964 2 16.5 mm 7” 3FR/3PFR/4FR CC 34960 1 216.5 mm1 7” 3CP CC 34965 2 16.5 mm 7” 3CP CC 34962 1 220.0 mm1 7” 5FR/5FPR CC 34963 2 20.0 mm 7” 5FR/5FPR CC 34970 1 220.0 mm1 7” 5CP CC 34980 2 20.0 mm 7” 5CP CC 76970 2 20.0 mm 10” 5CP CC 34628 1 224.0 mm1 12.4” 7FPR CC 34630 2 224.0 mm1 12.4” 7FPR CC 34563 2 30.0 mm 12.4” 15FPR CC 30655 2 30.0 mm 12.4” 25FR

www.dultmeier.com

• DAVENPORT, IA

(800) 553-6975

Wt. 9 lbs. 9 lbs. Call 9 lbs. Toll 9 lbs. Free 9 lbs. for 9 lbs. Current 9 lbs. Pricing! 9 lbs. 14 lbs. 18 lbs. 23 lbs. 22 lbs. 22 lbs.

E0293

212

GENERAL / INTERPUMP High Pressure Pumps Triplex and Duplex Plunger Pumps from General/Interpump. Available in Pulley Drive or DirectDrive Designs. Maximum operating temperature on most pumps is 165° F. Maximum inlet pressure is 125 PSI. (5 year limited warranty on all pumps and a lifetime warranty on manifolds against damage from freezing.)

Standard Features Forged Bronze Head. Highly resistant to chemical corrosion. Unitized Valves. Easily serviced. Valves are heat treated and seats are roller burnished to provide a tight seal and extended valve life. Continuously Lubricated Dual Packing System. Keeps packings cool by recycling water back into system. Pre-loaded packings eliminate need for external gland adjustment and greasing. Solid Ceramic Plunger. Extremely hard, won’t score. Precision micron finish produces excellent seal, reduces wear on packings. Replaceable Piston Guides. Made of Teflon, graphite and bronze alloy to prolong crankcase life. D

CW2040

Cast Aluminum Crankcase. Large capacity means better lubrication for long life operation. Connecting Rods. Large, full contact rods result in lower bearing pressure and added strength. Tapered Roller Bearings. Oversized to evenly distribute load for longer, more quiet bearing life. Forged and Hardened Steel Crankshaft. Mounting Rails. Standard with mounting rails and mounting bolts for ease in installation. Drive Design. Standard with shaft on right side when facing front of pump. (Left hand drive is available but must be specified.) LOW SPEED PLUNGER PUMPS (Pulley Drive)

TS1011

Interpump Part No. (Cross-Ref) IP CW1012 ——— IP HTCK4050S ———

Max. Max. Max. Pressure GPM RPM Shaft 1200/1000 10.0/12.0 750/900 35mm 1200 41.0 1000 35mm

FPT Ports Wt. Inlet Outlet Lbs. RETAIL 3/4" 3/8" 45 $ 1882.70 1" 3/4" 157 4082.98

IP T991B IP TS1041B IP T921B IP TS1021B

W99 WS104 W92 WS102

1500/1100 3.5/4.0 1450/1750 24mm 1600 8.0 1450 35mm 1700 5.0 1050 24mm 1700/2500 5.6/4.5 1450/1125 24mm

1/2" 3/4" 1/2" 1/2"

3/8" 3/8" 3/8" 3/8"

21 478.38 46 1214.04 30 576.20 32 590.94

IP T1011B IP TS1011B IP TS1321B IP T1321B

W101 WS101 WS132 W132

1500/2000 5.6/4.5 1450/1125 24mm 2000 4.0 1450 24mm 2100 4.75 1450 24mm 2100 5.5 1150 24mm

1/2" 1/2" 1/2” 1/2"

3/8" 3/8" 3/8” 3/8"

32 32 32 36

1450 24mm 1450 24mm 1450 35mm 1250 24mm 1050 24mm

1/2” 1/2” 3/4" 1/2" 1/2"

3/8” 3/8” 3/8" 3/8" 3/8"

15 352.42 15 352.42 46 1569.14 33 749.06 33 695.46

3000/2500 10.0/12 1450 24mm 2700 3.5 1450 24mm 3000 4.75 1450 24mm 3000 5.5 1450 24mm 3000 5.0 1250 24mm 3000/2000 9.0/11.0 1140/1450 32mm

3/4” 1/2" 1/2” 1/2” 1/2" 3/4"

3/8” 3/8" 3/8” 3/8” 3/8" 3/8"

42 1317.22 32 590.94 21 477.04 21 477.04 35 727.62 61 1930.94

1/2" 1/2" 1/2" 3/4” 3/4” 1/2”

3/8" 3/8" 3/8" 3/8” 3/8” 3/8”

33 743.70 34 632.48 33 712.88 41 1117.56 42 923.26 52 1116.22

IP TC1511S17 W72 IP TC1811S17 W73 IP TS1531 WS153 IP CW2040 ——— IP T1621B W162

T721B

General Pump Oil Industrial Grade

IP TSF2421 IP TS1711B IP ES2212S IP ES2213S IP CW3040 IP T2031B

——— WS171 ——— ——— ——— ———

IP TS2011B IP TS1511B IP TS2021B IP TSF2221 IP TSF2021 IP TSP1819

* WS201 ** WS151 WS202 ——— ——— ———

2200 2200 2200 2500 2500

3500 3500 3500 3000 3600 5100

2.1 3.2 7.9 5.0 5.0

4.0 4.0 5.6 8.5 7.0 5.0

1450 24mm 1450 24mm 1450 24mm 1450 24mm 1450 24mm 1450 24mm

612.38 586.92 586.92 586.92

* NICKEL - Plated Brass Manifold. ** BRASS Manifold.

Specially blended, non-detergent pump oil for General Plunger Pumps. Increases pump life and performance.

Part No. IP T991B

Series 100, 30 wt. oil is for smaller General Pumps up to size T61B. Available in 16 oz. bottles or 2-1/2 gallon jugs. Series 200, 50 wt. oil is for Large General Plunger Pumps such as T61B and larger. Available in 16 oz. bottles or 2-1/2 gallon jugs. Oil Std. Part No. Type Pkg. *Pkg. IP 100214-1 30 wt. 16 oz. 24 IP 100553-1 30 wt. 2-1/2 gallon 2 IP 100016-1 50 wt. 16 oz. 6 IP 100450 50 wt. 2-1/2 gallon 2 IP 100735-1 90 wt. 2-1/2 gallon 2

RETAIL $ 7.17 76.38 7.50 85.09 105.19

*10% Discount If Ordered In Std. Pkgs.

HIGH SPEED PLUNGER PUMPS (Direct Drive)

Interpump Max. Max. (Cross-Ref) Pressure GPM W99 1100 4.0

Max. RPM Shaft 1750 24mm

FPT Ports Inlet Outlet 1/2" 3/8"

Wt. Lbs. RETAIL 21 $ 478.38

IP TS1011B IP T9951B IP T9971B

WS101 W995 W997

1500 4.7 1500 3.5 2000 4.0

1750 24mm 1750 24mm 1750 24mm

1/2" 1/2" 1/2"

3/8" 3/8" 3/8"

33 19 22

586.92 446.22 611.04

IP CW2004

——— 2500 4.0

1750 24mm

1/2"

3/8"

722.26

IP EP1813S17

———

2900

1750 24mm

1/2”

3/8”

403.34

IP T9211B IP T9281B

W921 W928

3000 4.0 4000 4.0

1750 24mm 1750 24mm

1/2" 1/2"

3/8" 3/8"

33 33

726.28 907.18

4.2

IP TS2011B IP ES2013S IP TSF2021 IP TSF2221 IP TSF2421 IP ES2010S IP ES2012S

WS201 ——— ——— ——— ——— ——— ———

2300 3600 3600 3000 2500 4000 4000

4.7 5.5 8.5 10.2 12.0 3.9 4.7

1750 24mm 1750 24mm 1750 24mm 1750 24mm 1750 24mm 1750 24mm 1750 24mm

1/2" 1/2” 3/4" 3/4" 3/4” 1/2” 1/2”

3/8" 3/8” 3/8" 3/8" 3/8” 3/8” 3/8”

33 21 42 41 42 21 21

743.70 477.04 923.26 1117.56 1317.22 477.04 477.04

IP TSF1819 IP TSP1619

——— ———

4350 5800

6.3 4.3

1750 1750

3/4” 1/2”

3/8” 3/8”

41 52

923.26 1240.84

24mm 24mm

NOTE: Shafts are on the right side when facing pump manifold. For Left-handed shafts, Please Specify.

IND

DULTMEIER SALES • OMAHA, NE

(800) 228-9666

•

www.dultmeier.com

• DAVENPORT, IA

(800) 553-6975

E0286

General HIgh Pressure Plunger Pumps

213

Direct Drive • Forged Brass Manifolds Triplex Plunger Pumps with Hollow Shaft (Flanged for Direct Couple to Electric Motor). NEMA-56C. Direct Drive D

5/8" Shaft

Part No. IP TT2021EBF IP T9051EBF IP TT9061EBF IP TT2028EBF IP TT9071EBF IP TT9111EBF

Max. Pressure 2000 1500 1500 2000 1500 1500

Max. GPM 2.1 2.1 2.1 2.8 2.8 3.0

Max. RPM 3400 1750 3400 3400 3400 1750

Shaft 5/8" Hollow 5/8" Hollow 5/8" Hollow 5/8" Hollow 5/8" Hollow 5/8" Hollow

FPT Ports Inlet Outlet 3/8" 1/4" 3/8" 1/4" 3/8" 1/4" 3/8" 1/4" 3/8" 1/4" 3/8" 1/4"

Wt./Lbs. 11.5 11.5 11.5 11.5 11.5 11.5

RETAIL $ 348.40 365.82 352.42 337.68 348.40 364.48

Triplex Plunger Pumps with Hollow Shaft (Flanged for Direct Couple to Electric Motor). NEMA-184C.

Direct Drive

1-1/8" Shaft

Part No. IP EZ2536E IP EP1812E17 IP EZ2542E IP EZ2545E IP EZ2555E IP EZ4035E34 IP EZ4040E34

Max. Pressure 2500 2500 2500 2500 2500 4000 4000

Max. GPM 3.6 4.0 4.2 4.6 5.5 3.5 4.0

Max. RPM 1750 1750 1750 3400 3400 3400 3400

Shaft 1-1/8" Hollow 1-1/8” Hollow 1-1/8" Hollow 1-1/8" Hollow 1-1/8" Hollow 1-1/8" Hollow 1-1/8" Hollow

FPT Ports Inlet Outlet 1/2" 3/8" 1/2” 3/8” 1/2" 3/8" 1/2" 3/8" 1/2" 3/8" 1/2" 3/8" 1/2" 3/8"

Wt./Lbs. 18.5 17.0 18.5 18.5 18.5 18.5 18.5

RETAIL $ 458.28 377.88 494.46 459.62 459.62 530.64 533.32

Triplex Plunger Pumps with Hollow Shaft, (Flanged for Direct Couple to Gasoline Engines with 3/4" Shafts). Direct Drive D

3/4" Shaft

Part No. IP TT9061GBF IP TT2028GBF IP TT9071GBF IP TT2035GBF IP TT1540GBF

Max. Pressure 1500 2000 1500 2000 1500

Max. GPM 2.1 2.8 2.8 3.5 4.0

Max. RPM 3400 3400 3400 3400 3400

Shaft 3/4" Hollow 3/4" Hollow 3/4" Hollow 3/4" Hollow 3/4" Hollow

FPT Ports Inlet Outlet 3/8" 1/4" 3/8" 1/4" 3/8" 1/4" 3/8" 1/4" 3/8" 1/4"

Wt./Lbs. 11.4 11.4 11.4 11.4 11.4

RETAIL $ 335.00 337.68 335.00 337.68 337.68

Triplex Plunger Pumps with Hollow Shaft, (Flanged for Direct Couple to Gasoline Engines with 3/4" Shafts). Direct Drive

3/4" Shaft

Part No. IP TX1505G6 IP TX1506G6 IP TX1508G6 IP EP1508G6

Max. Pressure 3000 3000 3000 3000

Max. GPM 2.0 2.6 3.0 3.4

Max. RPM 3400 3400 3400 3400

Shaft 3/4" Hollow 3/4" Hollow 3/4" Hollow 3/4” Hollow

FPT Ports Inlet Outlet 1/2" 3/8" 1/2" 3/8" 1/2" 3/8" 1/2” 3/8”

Wt./Lbs. 18.0 18.0 18.0 16.0

RETAIL $ 377.88 377.88 377.88 431.48

Plunger Pumps with Hollow Shaft, (Flanged for Direct Couple to Gasoline Engines with 1" Shafts).

Direct Drive

1" Shaft

Max. Part No. Pressure IP TX1506G8 3000 IP EP1506G8 3000 IP TX1508G8 3000 IP TX1510G8 3000 IP EP1311G8 4000 IP EP1313G8 4000 IP ESN1512G * 3600 * Nickel Plated Manifold

Max. GPM 2.6 2.9 3.0 4.0 3.4 4.0 5.3

Max. RPM 3400 3400 3400 3400 3400 3400 3400

Shaft 1" Hollow 1” Hollow 1" Hollow 1" Hollow 1” Hollow 1” Hollow 1” Hollow

FPT Ports Inlet Outlet 1/2" 3/8" 1/2” 3/8” 1/2" 3/8" 1/2" 3/8" 1/2” 3/8” 1/2” 3/8” 1/2” 3/8”

Wt./Lbs. 18.0 17.0 18.0 18.0 17.0 17.0 21.0

RETAIL $ 389.94 422.10 388.60 388.60 448.90 377.88 573.52

Triplex Plunger Pumps with Hollow Shaft, (Flanged for Direct Couple to Gasoline Engines with 1" Shafts).

Direct Drive

Part No. IP EZ3030G34 IP EZ3035G IP EZ3040G IP EZ3045G

Max. Pressure 3200 3000 3000 3000

Max. GPM 3.0 3.5 4.0 4.6

Max. RPM 3400 3400 3400 3400

Shaft 1" Hollow 1" Hollow 1" Hollow 1" Hollow

FPT Ports Inlet Outlet 1/2" 3/8" 1/2" 3/8" 1/2" 3/8" 1/2" 3/8"

3400 3400 3400

1" Hollow 1" Hollow 1" Hollow

1/2" 1/2" 1/2"

Wt./Lbs. 19.1 19.1 19.1 19.1

RETAIL $ 432.82 474.36 505.18 513.22

20.0 20.0 20.0

$ 545.38 545.38 501.16

Wt./Lbs. 24.0 24.0 45.0 45.0 45.0 45.0 45.0 45.0 45.0

RETAIL $ 647.22 682.06 846.88 893.78 896.46 1014.38 893.78 1014.38 1005.00

45.0

$ 988.92

Maximum Inlet Vacuum: Flooded IP EZ4030G34 IP EZ4035G34 IP EZ4040G34

1" Shaft

Gear Box Drive

1" & 1-1/8" Shaft

3.0 3.5 4.0

3/8" 3/8" 3/8"

Triplex Plunger Pumps with Gear Box for Gas Engines with 1" Shafts. Shaft Dia.: 1" Part No. IP T991GR IP T9971GR IP TS1711GR IP TS1011GR IP TS1511GR IP TS2011GR IP TS1321GR IP TS1621GR IP TS2021GR

Max. Pressure 1500 2000 2700 2000 3000 3000 2100 2500 3500

Max. GPM 3.5 3.5 3.5 4.0 4.0 4.0 4.75 4.75 5.6

Max. RPM 3400 3400 3400 3400 3400 3400 3400 3400 3400

Shaft 1" Hollow 1" Hollow 1" Hollow 1" Hollow 1" Hollow 1" Hollow 1" Hollow 1" Hollow 1" Hollow

4.0

3400

1-1/8" Hollow

FPT Ports Inlet Outlet 1/2" 3/8" 1/2" 3/8" 1/2" 3/8" 1/2" 3/8" 1/2" 3/8" 1/2" 3/8" 1/2" 3/8" 1/2" 3/8" 1/2" 3/8"

Shaft Dia.: 1-1/8" IP TS2011GR2

IND

4000 4000 4000

DULTMEIER SALES • OMAHA, NE

3000

(800) 228-9666

•

www.dultmeier.com

1/2"

• DAVENPORT, IA

3/8"

(800) 553-6975

E0641

214

GENERAL High Pressure Plunger Pumps High Temperature, Run-Dry Capabilities

The quality that you have learned to expect from General Pumps, but now with the new Emperor line, which can withstand temperatures to 185˚ F. and can even run dry for several hours. Nickel-plated forged brass or stainlee manifolds provide corrosion resistant operation. High temperature, run-dry seals. New Patent-Pending valve design. Wide range of flow and pressure ranges. Rails included with some models. PEHT Platinum & ESS Platinum/316SS (3.40-5.5 GPM)

HTC1509E175 (2.1 GPM)

PEHT Platinum Series (4.0 - 5.5 GPM) - Nickel Stainless Manifold Ports: 1/2” In & 3/8” Out. ESS has 316SS Manifolds Shaft Wt.

HTX Series (3.1 - 3.8 GPM)

Part No. GPM Max. PSI RPM Size Lbs. RETAIL IP PEHT2010S 4.0/3.93 3000 1750/1450 24mm 10 $ 791.94 IP PEHT2214S 4.0 3000 950 24mm 10 846.88 IP ESS2010SS 4.0 3000 1750 22mm 22 2014.02 IP PEHT2012S 4.76/3.96 3000 1750/1450 24mm 10 791.94 IP PEHT2213S 5.55/3.43 3000 1450/950 24mm 10 791.94 IP ESS2212SS 5.50 3000 1750 24mm 22 2014.02 IP 101112 Rail Kit, Stainless...................................................... 54.94

HTC Models (2.0 - 2.6 GPM) - Nickel Brass Manifold Ports: 1/2” In & 3/8” Out Shaft Wt. Part No. GPM Max. PSI RPM Size Lbs. RETAIL IP HTC1509S17 2.1 2200 1750 24mm 16 $ 550.74 IP HTC1511S17 2.6 2200 1750 24mm 16 550.74 IP HTC1509E175 * 2.1 2200 1750 5/8” Hollow 16 550.74 IP HTC1505E345 * 2.1 2200 3400 5/8” Hollow 16 550.74 * Includes Flange to Mount to C-Face Electric Motors.

HTX Models (3.1 - 3.8 GPM) - Nickel Brass Manifold Ports: 1/2” In & 3/8” Out Shaft Wt.

Part No. GPM IP HTX1810S 3.1 IP HTX1813S 3.5 IP HTX1812S 3.8 * Rail Set Included

HTS Series (4.0 - 5.6 GPM)

Max. PSI 2000 2300 2000

RPM Size Lbs. RETAIL 1750 24mm 18 $ 696.80 1450 24mm 18 696.80 1750 24mm 18 696.80

HTS Models (4.0 - 5.6 GPM) - Nickel Brass Manifold Ports: 1/2” In & 3/8” Out Shaft Wt. Part No. GPM Max. PSI RPM Size Lbs. RETAIL IP HTS2210S 4.0 2300 1450 24mm 32 $ 933.98 IP HTS2212S 4.75 2300 1450 24mm 32 933.98 IP HTS2215S 4.0/5.0 2300 950/1200 24mm 32 950.06 IP HTS2016S 5.6 3000 1450 24mm 32 933.98 * Rail Set Included

HTF Models (4.0 - 12 GPM) - Nickel Brass Manifold Ports: 3/4” In & 3/8” Out Shaft Wt. HTCK Series (21 - 36 GPM)

Part No. GPM Max. PSI RPM Size Lbs. RETAIL IP HTF2018S 4.0/5.0/7.5 3600 950/1200/1750 24mm 41 $ 1719.22 IP HTF2221S 8.5/10.2 3000 1450/1750 24mm 41 1776.84 IP HTF2421S 10.0/12.0 3000/2500 1450/1750 24mm 41 1850.54 * Rail Set Included

HTCK (21 - 36 GPM) Models - Nickel Brass Manifold Ports: 1” In & 1/2” Out Shaft Wt. D

IND

DULTMEIER SALES • OMAHA, NE

Part No. IP HTCK3623S IP HTCK4050S IP HT125RCK IP HT150RCK

(800) 228-9666

•

GPM Max. PSI RPM Size Lbs. RETAIL 21/25 1500/1300 1150/1350 30mm 80 $ 3352.68 36 1500 800 40mm 157 4082.98 Rail Set, 36 Series..................................................... 51.59 Rail Set, 40 Series..................................................... 91.79

www.dultmeier.com

• DAVENPORT, IA

(800) 553-6975

E0627

High Pressure Pumps

215

AR Plunger Pumps are designed for a wide variety of industrial cleaning, car/truck wash and pressure wash applications. Available in pulley or direct drive for electric motor or gas engines.

Standard Features Include: High strength, forged brass manifolds • Aluminum oxide ceramic plungers • Stainless steel valves, seats and springs • Continuously lubricated seals and V-packings • Triple lip oil seals • Extra long connecting rods made from a special alloy • Die-cast aluminum crankcases with oversized cooling fins • Premium bearings for exceptional load support • Maximum 140° F. • Ports on most pumps are 1/2” inlet by 3/8” outlet • Large flow pumps have larger ports • Rails are not included and must be ordered separately if needed. Direct Drive Motor Models Wt. Part No. AR XTA2G15EBA-F8 AR RCA3G25E-F8 AR RRA3G30E-F17 AR RRA4G30E-F17 AR RKA4G30E-F17 AR RCV2G25E-F8 AR XTV2G15EBA-F8 AR RCV3G25E-F8

RSV Series

Flow/Pressure 2.1 gpm @ 1800 psi 3.0 gpm @ 2500 psi 3.0 gpm @ 3000 psi 4.0 gpm @ 3000 psi 4.0 gpm @ 3000 psi 2.0 gpm @ 2500 psi 2.1 gpm @ 1500 psi 3.0 gpm @ 2500 psi

RPM 1750 1750 1750 1750 1750 3400 3400 3400

Lbs. 10 11 18 18 21 11 10 11

Flange 56C 56C 182/184TC 182/184TC 182/184TC 56C 56C 56C

Shaft RETAIL 5/8" Hollow $ 381.90 5/8" Hollow 317.58 1-1/8" Hollow 407.36 1-1/8" Hollow 407.36 1-1/8” Hollow 460.96 5/8" Hollow 339.02 5/8" Hollow 381.90 5/8" Hollow 339.02

Direct Drive Gas Engine Models Wt.

RRA Series

XWL Series

RTF/RTJ Series

Part No. Flow/Pressure AR XMV25G26D-F25 2.5 gpm @ 2600 psi AR RCV25G27D-F7 2.5 gpm @ 2700 psi AR RMV25G30EZ 2.5 gpm @ 3000 psi AR RCV3G25D-F7 3.0 gpm @ 2500 psi AR XMV3G25D-F25 3.0 gpm @ 2500 psi AR RSV3G30D-F25EZ 3.0 gpm @ 3000 psi AR XMV3G30D-F24 3.0 gpm @ 3000 psi AR RKV35G30ADF24 3.5 gpm @ 3000 psi AR SXMV35G40DF24 3.5 gpm @ 4000 psi AR RRV4G36D-F24 4.0 gpm @ 3600 psi AR RSV4G40HDF40E * 4.0 gpm @ 4000 psi * Includes Built-In Unloader Valve.

RPM 3400 3400 3400 3400 3400 3400 3400 3400 3400 3400 3400

Lbs. 15 11 8 11 15 14 16 21 16 18 14

Flange Gas Gas Gas Gas Gas Gas Gas Gas Gas Gas Gas

Shaft RETAIL 3/4" Hollow $ 351.08 3/4" Hollow 324.28 3/4" Hollow 231.82 3/4" Hollow 339.02 3/4" Hollow 356.44 3/4” Hollow 344.38 1" Hollow 367.16 1" Hollow 481.06 1" Hollow 416.74 1” Hollow 356.44 1” Hollow 373.86

Pulley Drive Models Wt. Part No. Flow/Pressure RPM Lbs. Flange Shaft AR XT814N 2.1 gpm @ 2000 psi 1450 11 None 24mm AR XTA2G20N 2.1 gpm @ 2000 psi 1750 10 None 24mm AR RCA25G25N 2.5 gpm @ 2000 psi 1750 10 None 24mm AR XTA3G22N 3.0 gpm @ 2000 psi 1750 11 None 24mm AR RCA3G25N 3.0 gpm @ 2500 psi 1750 10 None 24mm AR RCA35G25N 3.5 gpm @ 2500 psi 1750 10 None 24mm AR RRA4G30N 4.0 gpm @ 3000 psi 1750 17 None 24mm AR RKA4G30AN 4.0 gpm @ 3000 psi 1750 19 None 24mm AR RK1528HN 4.0 gpm @ 4000 psi 1450 22 None 24mm AR RKA4G40HN 4.0 gpm @ 4000 psi 1750 20 None 24mm AR RGX1550N 4.0 gpm @ 7250 psi 1450 36 None 24mm AR RK1828HN 4.7 gpm @ 4000 psi 1450 20 None 24mm AR XWM2128 5.5 gpm @ 4000 psi 1450 34 None 24mm AR SXW2135 5.5 gpm @ 5100 psi 1450 35 None 24mm AR RGX2250N 5.8 gpm @ 7250 psi 1450 36 None 24mm AR SXWA7G50 7.0 gpm @ 5000 psi 1750 35 None 24mm AR XW3025N 7.9 gpm @ 3600 psi 1450 34 None 24mm AR RTX30500N 8.0 gpm @ 7250 psi 1450 72 None 30mm AR RTP30.60N * 7.9 gpm @ 8700 psi 1000 177 None 35mm AR XWAM8G35N 8.0 gpm @ 3500 psi 1750 34 None 24mm AR RTP38N * 10 gpm @ 7250 psi 1000 177 None 35mm AR XWL4121N 11 gpm @ 3000 psi 1450 34 None 24mm AR XWL50.15N 13 gpm @ 2200 psi 1450 34 None 24mm AR RTX70 17 gpm @ 2900 psi 1450 72 None 30mm AR RTJ70 * 18 gpm @ 4000 psi 1000 198 None 35mm AR RTX85 22 gpm @ 2200 psi 1450 72 None 30mm AR RTX100 26 gpm @ 1800 psi 1800 72 None 30mm AR RTX150 39 gpm @ 1450 psi 1450 72 None 30mm AR 1836H Rail Kit, 1-1/2” High, XT Series........................................................ AR 2729 Rail Kit, RK, RKA, RKW Series........................................................ AR 2633 Rail Kit, 1-3/4” High, RC, RCA, RCV, RR, RRA Series.................... AR 2633H Rail Kit, 2-5/8” High, RC, RCA, RCV, RK, RR, RRA Series............. AR AR2748 Rail Kit, 1-1/4” High, RW, SXW, XW All, Series, 5 HP..................... * Pumps have Built-In Feet that are Bolted to Baseplates, No Rails Needed.

RETAIL $ 361.80 367.16 306.86 388.60 318.92 325.62 375.20 427.46 473.02 473.02 911.20 494.46 695.46 954.08 915.22 936.66 794.62 2287.38 4905.74 754.42 4963.36 943.36 943.36 1825.08 5286.30 1834.46 1841.16 1825.08 19.43 10.39 21.04 26.26 15.28

Hydraulic Drive Pump/Motor Units Part No. AR HYDRK1520 AR HYDXW3010

REPAIR KITS

Hydraulic Units

IND

Part No. AR AR1828 AR AR1864 AR AR2780 AR AR2864 AR AR1853 AR AR1857 AR AR2520 AR AR2189 AR AR2278 AR AR2741 AR AR2747 AR AR2782 AR AR2546

Pump Output 4 gpm @ 3000 psi 8 gpm @ 1450 psi

Hydraulic Requirements 7.5 gpm @ 2500 psi 9.5 gpm @ 1800 psi

Wt. 26 lbs. 43 lbs.

Valve Kit, XRV/XRVC/GRKV/RKV..................................................... Valve Kit, XTA, XTV, HPE, XMV......................................................... Valve Kit, XW, WWA.......................................................................... Valve Kit, RK, RKA............................................................................ Packing Kit, XWT, XWF, XWL............................................................ Packing Kit, XRV, XRA, RKV, RK....................................................... Packing Kit, XTA, XTV, HPE.............................................................. Packing Kit, RSV................................................................................ Packing Kit, XWM.............................................................................. Packing Kit, (15mm), XMV, XM, XMA................................................ Packing Kit, XMA (18mm).................................................................. Packing Kit, XWA, (20mm)................................................................. Plunger Kit, XRCA, XRCV.................................................................

DULTMEIER DULTMEIER SALES SALES • OMAHA, • OMAHA, NE NE(800) (800) 228-9666 228-9666 • www.dultmeier.com • www.dultmeier.com • DAVENPORT, • DAVENPORT, IA IA(800) (800) 553-6975 553-6975

RETAIL $ 936.66 1275.68 RETAIL $ 47.57 40.47 104.52 49.58 207.70 91.79 75.04 64.05 129.31 73.03 77.72 103.85 152.43 E0289 E0289

Plunger Pumps

216

Ready To Go High Pressure Pump Units General and AR Plunger Pumps

Pre-Plumbed General and AR Plunger Pumps Units. All models include pump, inlet fitting, unloader valve, thermal relief valve, bypass hose, discharge quick coupler and flange for correct engine mounting. Note: All AR Pump Packs also include downstream chemical injector with tubing. Pump packages allow for a complete pump unit to mount directly to your existing gas engine for simple and easy replacements in the field. All units mate up to 3/4” or 1” engine shafts as shown. Required HP sizes are for full flow and pressure as noted.

General Pump Packages IP PMRET1507G6 (ET Series) • For 8 - 9 HP Gas Engines with 3/4” Shaft • Rated to 3.3 GPM @ 2600 PSI • Rated for 3400 RPM

$ 432.82

AR Pump Packages AR RSV3G30PKG (RSV Series) • For 8 - 9 HP Gas Engines with 3/4” Shaft • Rated to 3 GPM @ 3000 PSI • Rated for 3400 RPM

$ 381.90 AR RSV3G34PKG (RSV Series)

IP PMREP1508G8 (EP Series)

• For 10 - 11 HP Gas Engines with 1” Shaft • Rated to 3 GPM @ 3400 PSI • Rated for 3400 RPM

• For 10 - 12 HP Gas Engines with 1” Shaft • Rated to 3.4 GPM @ 3000 PSI • Rated for 3400 RPM

$ 400.66

$ 503.84 IP PMRPEP1313G8 (EP Series) • For 13 - 15 HP Gas Engines with 1” Shaft • Rated to 4 GPM @ 4000 PSI • Rated for 3400 RPM

$ 485.08

IP PMREZ4040G (EZ Series)

AR RRV4G40PKG (RRV Series) • For 12 - 13 HP Gas Engines with 1” Shaft • Rated to 4 GPM @ 3600 PSI • Rated for 3400 RPM

$ 530.64

AR RSV4G40PKG (RSV Series)

• For 13 - 15 HP Gas Engines with 1” Shaft • Rated to 4 GPM @ 4000 PSI • Rated for 3400 RPM

$ 526.62

$ 420.76

IND

DULTMEIER DULTMEIER SALES SALES • OMAHA, • OMAHA, NE NE(800) (800) 228-9666 228-9666 • www.dultmeier.com • www.dultmeier.com • DAVENPORT, • DAVENPORT, IA IA(800) (800) 553-6975 553-6975

E0289 E1219

High Pressure Pumps 2200 Series

Hypro 2300B-P Series Plunger Pumps

SERVICE REPAIR e in Availabl rt Davenpo Omaha &

Hypro Twin Cylinder Ceramic Plunger Pumps

217

• Stainless Steel Unitized Valves

• Forged Brass Head

Now you can have an American made, brass head, ceramic pump at a competitive price. Crankshaft roller bearings run in an oil bath for continuous protection (30 Wt. non-detergent oil recommended). Ceramic plungers for long life and smooth operation. Stainless steel valve assemblies. Brass manifold head. Onepiece connecting rod and floating wrist pin. Full 2-Year Warranty for defects in material and workmanship. Available with either a solid or hollow shaft. Also available in either 1800 or 3600 RPM for direct hook-up to electric or gasoline engine.

• Polished Ceramic Plungers • Buna-N High Temperature Seals • Forged Steel Crankshaft • Oil Bath Crankcase • One piece connecting rod and patented floating wrist pin

• Heavy Duty Needle Bearings support both ends of crankshaft

Polished ceramic plungers for longer seal life. Single-piece forged brass head. Precision machined, unitized valves. Operates at pressures to 3000 PSI. High temperature U-cup seal is extra wear resistant and can be replaced in minutes. Oil bath crankcase. TWO YEAR Warranty against defects in material or workmanship.

Note: Solid shafts are 3/4”, hollow shafts are 5/8”. 1/2” FPT inlet and 3/8” outlet. Shaft rotation is either CW or CCW. Part No. RPM Shaft GPM PSI

HY 2220B 1725 Solid HY 2221B 3450 Solid HY 2221BH 3450 Hollow HY 2230B 1725 Solid HY 2231B 3450 Solid

2.1 2.1 2.1 3.0 3.0

Required H.P.

2000 1500 1500 1500 1500

3 2 2 3 3

Wt.

13 lbs. 14 lbs. 13 lbs. 13 lbs. 13 lbs.

RETAIL

$ 594.96 594.96 612.38 594.96 594.96

5300 Series Twin Piston Pumps

SPECIFICATIONS: Shaft size 3/4” or 24mm • Two 1/2” inlet ports and two 3/8" outlet ports • Either CW or CCW rotation. • Maximum temperature 180° F. • Maximum inlet pressure is 60 PSI. • These pumps can be mounted to various C-Face motors. • Pump includes mounting rails. Note: 8000-10 Flange kit is used to mount pumps to C-Face motors. Part No. Max. GPM Max. PSI Max. RPM HY 2330B 3.1 2500 1725 HY 2340B 4.2 2500 1725 HY 2345B 4.8 2500 1725 HY 2351B 4.0 3000 1725 HY 2359B 3.5 3000 1725 * Car Wash Pumps with heavy-duty seals. HY 8000-21

1/2” FPT Ports

GPM @ Required HP 1800 RPM @ 500 PSI

HY 5315CHR HY 5320CR HY 5320CC HY 5330CR HY 5330CC HY 5320CHR HY 5320CCH HY 5330CHR HY 5330CCH

1.5 2.0 2.0 3.0 3.0 2.0 2.0 3.0 3.0

.67 .80 .80 1.10 1.10 .80 .80 1.10 1.10

Shaft Type

Big Twin Series 5200 3/4” FPT Ports D

Piston Wt. Cups Lbs.

5/8" Hollow 5/8" Solid 5/8" Solid 5/8" Solid 5/8" Solid 5/8" Hollow 5/8" Hollow 5/8" Hollow 5/8" Hollow

Rubber Rubber Teflon Rubber Teflon Rubber Teflon Rubber Teflon

Part No.

Mounting Rails are Included

Part No. GPM Shaft Size Piston Cups HY 5206C 6 1" Solid Leather HY 5206CH 6 1-3/8" Hollow Leather HY 5206CFH 6 1-3/8" Hollow Fabric HY 5210C 10 1" Solid Leather HY 5210CF 10 1" Solid Fabric HY 5210CH 10 1-3/8" Hollow Leather

Rated at Pressures to 1000 PSI & 2.2 GPM at 1800 RPM (1.5 HP) Cast iron housings, heavy duty ball bearings, stainless steel plungers and unitized stainless steel valves. Crankshafts are available in a 5/8" solid shaft, for pulley or coupling drive and a 5/8" hollow shaft version for direct mounting to a standard 56 frame, 5/8" motor shaft. 1/2” FPT ports. Note: 5322 pumps are standard with ceramic plungers for increased wear life.

Shaft

Cups

HY 5322C 5/8"-Solid Rubber HY 5322CH 5/8"-Hollow Rubber

Wt.

10 lbs. 10 lbs.

DULTMEIER SALES • OMAHA, NE

Delivers volume and high pressure for efficient cleaning or spraying. Rated to 140° F. These pumps are available with Fabric Cups for insecticides and herbicides; Leather Cups for aromatic solvents and other liquids injurious to rubber. 3/4” FPT ports. (Buna Cups are also available.)

RETAIL

10 $ 451.58 10 451.58 10 490.44 10 459.62 11 490.44 10 451.58 10 490.44 10 451.58 11 490.44

5322 Series 1/2” FPT Ports

Wt. RETAIL 16 lbs. 790.60 16 lbs. 786.58 16 lbs. 778.54 16 lbs. 808.02 15 lbs. 741.02

2300 Series Pump Accessories 2:1 Ratio Gearbox for 8 to 18 HP Gas Engines w/ 1" solid shafts..... $ 1569.14

Rated at Pressures to 500 PSI. These pumps use a high quality cast iron housing and incorporate unitized stainless steel valves, needle bearing crank pin and large ball bearings to support the crankshaft. Crankshafts are available in a 5/8" solid shaft, for pulley or coupling drive and a 5/8" hollow shaft version for direct mounting to a standard 56 frame, 5/8" motor shaft. Piston cups are available in rubber, for water, soaps and detergents to 140° F. Teflon cups are recommended for temperatures above 140° F. 1/2” FPT ports. Part No.

Shaft 3/4" 3/4" 3/4" 3/4" 3/4"

(800) 228-9666

To Deliver the Best Possible Service to Our Customers, Dultmeier Sales Strives to Live Up to A Set of Core Values, One of Which is to

RETAIL

$ 493.12 483.74

Display “Character”

•

Wt. RETAIL 18 lbs. $ 802.66 18 lbs. 802.66 18 lbs. 801.32 18 lbs. 802.66 18 lbs. 801.32 18 lbs. 802.66

www.dultmeier.com

• DAVENPORT, IA

Do the right thing even when no one is looking

(800) 553-6975

E0291

Plunger Pumps

218

from the ONLY American Manufacturer in the Industry

2400B Plunger Pumps Hypro's PowerLine™ Solid Shaft Plunger Pumps are designed to be used in belt drive or direct coupled operations where the power source is an electric motor or gas engine. These brass head, triplex pumps are equipped with self-loading seals and operate at temperatures to 160° F. Standard Features: Stainless steel unitized valves • Polished ceramic plungers • Forged brass head • Oil-bath crankcase • One piece connecting rod • Floating wrist pin • Heavy duty roller bearings • Mounting rails are also standard. 5-Year Warranty 2430B

Model 2535S & 2545S Plunger Pumps From Hypro, Large Volume Plunger Pumps with Stainless Steel manifolds. Ideal for automatic car washes, plant wash down, tunnel washes. 316SS Stainless manifold is standard. Longest warranty in the industry at 5 years. Innovative design allows for easy servicing of valves and seals. Standard Features: Stainless steel valves • Oversize crankshaft • Bronze connecting rods • Ceramic plungers • Epoxy coated finish • Inlet ports are 1-1/2" FPT • Outlet ports are 1" FPT • Shaft size is 35MM . 5-Year Warranty

2535S

Part No. Max. PSI Max. GPM Max. RPM Wt. RETAIL HY 2430B 3600 4.3 1725 35 lbs. $ 1374.84 HY 2431B 3600 5.1 1725 35 lbs. 1374.84 HY 2432B 3600 5.9 1725 35 lbs. 1374.84 HY 2434B 2500 7.9 1725 35 lbs. 1374.84

Plunger Pumps Part No.

Max. Flow

Max. PSI

Max. RPM

Wt.

38 GPM 47 GPM

1500 1200

800 800

140 lbs. 140 lbs.

HY 2535S HY 2545S

RETAIL

$ 5921.46 6200.18

REPAIR KITS

Specifications: Inlet ports: Two 3/4" FPT • Outlet ports: Two 1/2" FPT • Shaft rotation: CW or CCW • Shaft size: 1" solid • Oil type: 30 wt. non-detergent • Oil capacity: 26 oz. • Maximum water temperature: 160˚ F. • Maximum water inlet pressure: 60 PSI. Valve Kits D

2410B

Ceramic Plunger Kits

Seal Kits

Wt. Part No. Max. PSI Max. GPM Max. RPM Lbs. RETAIL HY 2410B 2500 4.4 1725 41 $ 1267.64 HY 2411B 2500 5.3 1725 41 1171.16 HY 2412B 2500 5.9 / 4.0 1725 / 1100 41 1184.56 HY 2413B 1800 7.2 1725 41 1171.16 HY 2414B 1800 8.0 / 4.0 1725 / 900 41 1118.90 HY 2414B-L * 1800 8.0 / 4.0 1725 / 900 41 1118.90 * Left Hand Shaft Part No. HY 8000-15 HY 8000-21 HY 8000-18

400 Series Gearbox & Flange Accessories RETAIL 2 Gearbox for Gas Engines with 1-1/8" Shafts...... $ 1290.42 Gearbox for Gas Engines with 1" Shafts........... 1569.14 Flange for C-Face Nema 182/184C Motors....... 191.29

NOTE: Shafts are Right-Hand when facing pump.

DULTMEIER SALES • OMAHA, NE

(800) 228-9666

•

Part No. HY 3430-491 HY 3430-316

Description RETAIL Valve Kit, 2300 B&P Series..................................... $ 79.73 Valve Kit, 2400 B&P Series.................................... 127.30

HY 3430-271 HY 3430-0493 HY 3430-485 HY 3430-486

Seal Kit, 2300 B Series........................................... Seal Kit, 2300 P Series........................................... Seal Kit, 2410/11/12/12/30/31/32 P Series............. Seal Kit, 2413/14/33/34 P Series............................

75.04 88.44 69.68 64.32

HY 3430-320 HY 3430-0514 HY 3430-321 HY 3430-322

Ceramic Plunger Kit, 2300 B Series...................... Ceramic Plunger Kit, 2300 P Series...................... Ceramic Plunger Kit, 2410/11/12 B&P Series....... Ceramic Plunger Kit, 2413/14/33/34 B&P Series..

39.40 32.70 64.72 71.02

www.dultmeier.com

• DAVENPORT, IA

(800) 553-6975

E0290

High Pressure Plunger Pumps

219

High Quality Plunger Pumps from Comet. All Pumps Feature the following: Anodized, Die-Cast Aluminum Crankcase • Solid Ceramic Plungers • Stainless Steel Check Valves and Piston Guides • Buna V-Packings • Reversible Crankcase Design for Right or Left Hand Mounting • Designed for Direct Drive to Gas Engines or Electric Motors or with Solid Shafts for Belt Drive. Direct Drive Electric Motor Models

AXD2020E with unloader

Part No. MV AXS2015E MV AXD2020E MV BXD2020E MV LWD2020E MV BXD2520E MV AXD2527GE MV BXD3020E MV LWD3020E MV LWD3522E MV LWD3522GE MV FWS3030E MV FWS3530E MV FWS4030E MV FWS4530E MV FWD4530E MV FWD25030E

Flow/Pressure 1.70 GPM @ 1500 PSI 1.90 GPM @ 2000 PSI 1.90 GPM @ 2000 PSI 2.10 GPM @ 2000 PSI 2.50 GPM @ 2000 PSI 2.50 GPM @ 2700 PSI 2.80 GPM @ 2000 PSI 3.0 GPM @ 2000 PSI 3.5 GPM @ 2200 PSI 3.5 GPM @ 2200 PSI 3.0 GPM @ 3000 PSI 3.5 GPM @ 3000 PSI 3.9 GPM @ 3000 PSI 4.5 GPM @ 3000 PSI 4.4 GPM @ 3000 PSI 5.1 GPM @ 3000 PSI

RPM 1750 3400 3400 3400 3400 3400 3400 3400 3400 3400 1750 1750 1750 1750 3400 3400

Flange 56C 56C 56C 56C 56C 56C 56C 56C 56C 56C 182/184TC 182/184TC 182/184TC 182/184TC 182/184TC 184TC

Shaft 5/8” Hollow 5/8” Hollow 5/8” Hollow 5/8” Hollow 5/8” Hollow 3/4” Hollow 5/8” Hollow 5/8” Hollow 5/8” Hollow 3/4” Hollow 1-1/8” Hollow 1-1/8” Hollow 1-1/8” Hollow 1-1/8” Hollow 1-1/8” Hollow 1-1/8” Hollow

Direct Drive Gas Engine Models

LWD3025G

Part No. Flow/Pressure MV LWD2020G 2.1 GPM @ 2000 PSI MV BXD2220G 2.2 GPM @ 2000 PSI MV AXD2527G 2.5 GPM @ 2700 PSI MV BXD2527G 2.5 GPM @ 2700 PSI MV AXD3020G 2.7 GPM @ 2000 PSI MV BXD3025G 2.8 GPM @ 2500 PSI MV LWD3025G 3.0 GPM @ 2500 PSI MV LWD3027G 3.0 GPM @ 2700 PSI MV AWD4030G 4.0 GPM @ 3000 PSI MV AWD4036GK *4.0 GPM @ 3600 PSI MV ZWD4040G 4.0 GPM @ 4000 PSI MV ZWD4040GK *4.0 GPM @ 4000 PSI MV EWD4042G 4.0 GPM @ 4200 PSI MV FW4030SGR 4.2 GPM @ 3000 PSI MV FWD24540G 4.3 GPM @ 4000 PSI MV FWD25040G 5.1 GPM @ 4000 PSI * Includes Unloader Valve & Chemical Injector.

RPM 3400 3400 3400 3400 3400 3400 3400 3400 3400 3400 3400 3400 3400 3400 3400 3400

Flange Gas Gas Gas Gas Gas Gas Gas Gas Gas Gas Gas Gas Gas Gas Gas Gas

Shaft 3/4” Hollow 3/4” Hollow 3/4” Hollow 3/4” Hollow 3/4” Hollow 3/4” Hollow 3/4” Hollow 3/4” Hollow 1” Hollow 1” Hollow 1” Hollow 1” Hollow 1” Hollow Gear Box 1” Hollow 1” Hollow

Pulley/Belt Drive Models

RW6030S

Part No. MV LW1009S MV LW1509S MV LW3020S MV LWS-3020S MV LW3525S MV LWS-4020S MV FW4030S MV RWS4040S MV RWS5030S MV FWS5040S MV TW5050S MV RW5535S MV TW5550S MV RW6030S MV RWS6040S MV TWN-8025S MV TWS8035S MV TWS-10030S MV TWS-13020S

Flow/Pressure 1.0 GPM @ 1500 PSI 1.5 GPM @ 1500 PSI 3.0 GPM @ 2000 PSI 3.1 GPM @ 2000 PSI 3.5 GPM @ 2500 PSI 4.0 GPM @ 2000 PSI 4.0 GPM @ 3000 PSI 4.0 GPM @ 4000 PSI 4.9 GPM @ 3000 PSI 5.2 GPM @ 4000 PSI 5.2 GPM @ 5000 PSI 5.5 GPM @ 3500 PSI 5.8 GPM @ 5000 PSI 6.2 GPM @ 3000 PSI 6.0 GPM @ 4000 PSI 8.0 GPM @ 2500 PSI 8.3 GPM @ 3500 PSI 10.7 GPM @ 3000 PSI 13.0 GPM @ 2000 PSI

REPAIR KITS

LWS3020S

Part No. MV 5019.0667 MV 5019.0671 MV 5019-77 MV 5019-35 MV 5019-37 MV 5019-64 MV 5019-38 MV 5025-0014 MV 5025-0030 MV 5025-11 MV 5025-0020 MV 5025-0021

DULTMEIER SALES • OMAHA, NE

RPM 1450 1450 1450 1750 1450 1750 1450 1750 1750 1750 1450 1450 1450 1450 1750 1000 1750 1750 1750

Flange None None None None None None None None None None None None None None None None None None None

Shaft 24mm 24mm 24mm 24mm 24mm 24mm 24mm 24mm 24mm 24mm 24mm 24mm 24mm 24mm 24mm 24mm 24mm 24mm 24mm

Wt. Lbs. 12 lbs. 12 lbs. 11 lbs. 13 lbs. 11 lbs. 12 lbs. 11 lbs. 13 lbs. 13 lbs. 13 lbs. 20 lbs. 20 lbs. 20 lbs. 20 lbs. 20 lbs. 20 lbs.

RETAIL $ 265.32 281.40 206.36 313.56 210.38 306.86 206.36 313.56 369.84 369.84 483.74 483.74 483.74 483.74 518.58 517.24

Wt. Lbs. 13 lbs. 11 lbs. 12 lbs. 11 lbs. 12 lbs. 11 lbs. 13 lbs. 14 lbs. 13 lbs. 13 lbs. 18 lbs. 20 lbs. 14 lbs. 30 lbs. 22 lbs. 22 lbs.

RETAIL $ 294.80 199.33 251.92 214.40 268.00 219.76 297.48 296.14 300.16 379.22 396.64 422.10 336.34 643.20 517.24 494.46

Wt. Lbs. 13 lbs. 13 lbs. 13 lbs. 13 lbs. 13 lbs. 13 lbs. 19 lbs. 27 lbs. 27 lbs. 20 lbs. 45 lbs. 27 lbs. 45 lbs. 27 lbs. 27 lbs. 45 lbs. 45 lbs. 45 lbs. 45 lbs.

RETAIL $ 309.54 308.20 308.20 308.20 326.96 326.96 459.62 505.18 486.42 518.58 842.86 505.18 842.86 519.92 533.32 793.28 777.20 846.88 880.38

RETAIL Packing Seal Kit, BXD Gas Models........................................................... $ 60.30 Packing Seal Kit, BXD Electric Models...................................................... 60.70 Packing Seal Kit, AXD/AXS 2000 PSI Models........................................... 69.01 Packing Seal Kit, LW Pumps, 15mm......................................................... 68.34 Packing Seal Kit, LW Pumps, 18mm......................................................... 69.68 Packing Seal Kit, ZWD Pumps, 15mm...................................................... 77.72 Packing Seal Kit, ZWD Pumps, 18mm...................................................... 153.77 Valve Kit, AXD/AXS/GXD Pumps.............................................................. 54.54 Valve Kit, BWD/AWD Pumps..................................................................... 56.68 Valve Kit, LW/ZW/FW/HW/SW Pumps...................................................... 77.72 Valve Kit, TW Pumps up to 3600 PSI........................................................ 115.91 Valve Kit, TW Pumps up to 4000 PSI & Up............................................... 139.03

(800) 228-9666

•

www.dultmeier.com

• DAVENPORT, IA

(800) 553-6975

E0791

Reciprocating Plunger Pumps

220

Myers High Pressure Industrial Pumps are designed, manufactured and assembled in the USA. Commonly used in Sewer Cleaning, Truck Washing, Oil and Gas Production, Water Treatment, Dewatering, Hydrostatic Testing, Well Fracking, Food Processing and many other applications that require pumps that stand up to demanding and hostile applications. Standard Features Include: Reliable, trouble-free performance • Field serviceability and repair • Broad range of flows and pressures • Temperature ratings to 450° F. with special seals on some models • Can be configured to handle a wide variety of corrosive fluids and solutions as needed • Extra large oil sump for superior lubrication • Clear, rear cover for easy oil inspection.

CPM Series Plunger Pumps

CXP Series Plunger Pumps

24 GPM • 4000 PSI

30 GPM • 2450 PSI

CPM Series Plunger Pumps have flows to 24 GPM and pressures to 4000 PSI. Continuous splash lubrication. Carbon steel crankcase and Ductile Iron manifold. (Stainless steel and Carbon Steel manifolds also available). Crankshaft rotates in either direction. Rated to 140° F. Dimensions are 24-1/2” L x 16-7/8” W x 11-1/4” H. Outlet is 1”. Shaft diameter is 1-3/8”. Maximum speed is 725 RPM on CPM18 and 600 RPM on CPM24. (Important: Myers pump shaft is always viewed from the rear and not the front of the Pump.)

CXP Series Plunger Pumps have flows to 30 GPM and pressures to 2450 PSI. Continuous splash lubrication for either shaft rotation. Easily serviced in the field without removal of pump. Cast Iron crankcase and Ductile Iron manifold. Rated to 140° F. Dimensions are 21-1/2” L x 13-1/3” W x 10-1/2” H. Inlet port is 1-1/2”. Outlet is 1”. Shaft diameter is 1-1/8”. Maximum speed is 900 RPM. (Important: Myers pump shaft is always viewed from the rear and not the front of the Pump.)

CXP Series Plunger Pumps

CPM Series Plunger Pumps CPM Series Plunger Pumps Part No. Manifold

MY CPM18-40 MY CPM24-30

Ductile Iron Ductile Iron

Flow

PSI

Wt.

CXP Series Plunger Pumps Part No. Manifold

RETAIL

20 GPM 4000 300 lbs. $15648.52 24 GPM 3000 300 lbs. 10722.68

MY CXP14-24 MY CXP18-20 MY CXP22-16 MY CXP26-14 MY CXP30-12

Ductile Iron Ductile Iron Ductile Iron Ductile Iron Ductile Iron

Flow

PSI

14 GPM 18 GPM 22 GPM 26 GPM 30 GPM

2450 2000 1650 1400 1200

Wt.

RETAIL

152 lbs. $ 9286.20 152 lbs. 9286.20 152 lbs. 8923.06 152 lbs. 8551.88 152 lbs. 8923.06

DP Series Plunger Pumps 79 GPM • 5500 PSI DP Series Plunger Pumps have flows to 79 GPM and pressures to 5500 PSI. 3.75:1 gear reduction ratio. Rugged versatility in this high flow series. Cast Iron crankcase and Ductile Iron manifold. Tungsten carbide coated stainless plungers. Forged, heat-treated crankshaft. Continuous splash lubrication in either direction of rotation. Rated to 160° F. Dimensions are 38” L x 21” W x 17-5/8” H. Inlet port is 3”. Outlet port is 1-1/2”.Shaft diameter is 1-5/8”. Maximum speed is 1800 drive rpm, (Pumps run at 456 D RPM). Hydraulic drive models are also available. DP Series (Important: Myers Plunger Pumps pump shaft is always viewed from the rear and not the front of the Pump.) DP Series Plunger Pumps Part No. Manifold

MY DP28-55 MY DP40-38 MY DP55-28 MY DP70-22 MY DP85-20

IND

Ductile Iron Ductile Iron Ductile Iron Ductile Iron Ductile Iron

Flow

PSI

27 GPM 39 GPM 53 GPM 70 GPM 79 GPM

5500 3800 2800 2150 2000

Wt.

(800) 228-9666

To Deliver the Best Possible Service to Our Customers, Dultmeier Sales Strives to Live Up to

RETAIL

A Set of Core Values,

725 lbs. $ 20626.62 725 lbs. 20213.90 725 lbs. 19912.40 725 lbs. 19913.74 725 lbs. 17425.36

DULTMEIER SALES • OMAHA, NE

Find Us on Facebook and Twitter

One of Which is “Teamwork”

•

www.dultmeier.com

• DAVENPORT, IA

Combining skills, talents and efforts to achieve company success

(800) 553-6975

E1108

WANNER Diaphragm Pumps • Bypass Valves

221

WANNER Hydra-Cell Pumps For Difficult fluids such as: • Reclaim Water • Abrasives

• Hot Solutions to 250° F (300° F. with special seals)

D10

• Slurries • Wettable Powders • Fertilizers

H25

Common Applications:

Solutions never come in contact with the pumping mechanism. Diaphragm design has no cups, packings or mechanical seals; this means less maintenance and down-time. Hydra-Cell pumps are American-Made, positive displacement pumps. They are self-priming and can be run dry without damage. Hydraulically balanced diaphragms and Timken roller bearings are standard features. Shaft rotation can be in either direction for ease of mounting. MATERIALS: Brass pump manifolds. Buna-N Elastomers, Stainless Steel Valves, Seats and Valve Springs standard on all models. Rated to 160° F. on standard pumps, higher temperature pumps also available. D10: Rated to 8.0 GPM and 1000 PSI @ 1450 RPM. Shaft diameter is 7/8". Dimensions- (10-3/4" L x 7-1/4" W x 7-7/8" H). (Note: This pump can be ordered at flow rates of 4 or 6 GPM @ 1750 RPM if required.) Inlet is 1" and Outlet is 3/4". D15: Rated to 13 GPM @ 1500 PSI or 10 GPM @ 2500 PSI. Shaft diameter is 1-1/8". Dimensions- (16" L x 10" W x 12-1/2" H). Inlet is 1-1/4" FPT and Outlet is 3/4" FPT. H25: Rated to 20 GPM and 1000 PSI @ 1050 RPM. Shaft diameter is 1-1/8". Dimensions- (15-1/2" L x 9-1/2" W x 10" H). Inlet is 1-1/2" and Outlet is 1". D35: Rated to 36 GPM and 1200 PSI @ 1050 RPM. Shaft diameter is 2". Dimensions- (21" L x 11-1/2" W x 15" H). Inlet is 2-1/2" and Outlet is 1-1/4".

Hydra-Cell Bypass Valves

• Car/Truck Washes Conveyor - Reclaim water. • Lawn Care - Herbicides and Fertilizers. • Carpet Cleaning - High Temperature Solutions. • Water Treatment - Reverse Osmosis and Desalination Systems. • Automatic Car Washes - High Pressure Pumping Units.

* Max. * Max. Max.Required Part No. Flow Pressure HP Wt. RETAIL WN D10 8.0 GPM 1000 PSI 5.8 45 lbs. $ 1657.58 WN D15 13/10 GPM 1500/2500 PSI 15.6 145 lbs. 5025.00 WN H25 20 GPM 1000 PSI 13.9 120 lbs. 4018.66 WN D35 36 GPM 1200 PSI 30.0 240 lbs. 7483.90 WN C22A Pressure Regulator, 10 gpm, 1000 psi................... 329.64 WN C62B Pressure Regulator, 14 gpm, 2500 psi................... 367.16 WN C23A Pressure Regulator, 20 gpm, 1000 psi................... 456.94 WN C24A Pressure Regulator, 40 gpm, 1000 psi................... 1053.24 WN 3431 Oil - One Quart (HYDRAOIL 10W30) .................... 19.03 WN 3440 Oil - One Quart (HYDRAOIL 10W40)..................... 19.83 WN 3432 Oil - 2-1/2 Gallon (HYDRAOIL 10W30) .................. 117.92 For specific applications, special materials of construction are available. Please give pumping requirements when ordering. * Note: Optimum Usage of Above Pumps is 10% under full rating.

Wanner Pump Repair Kits

Designed to handle the same rigorous demands as the Hydra-Cell pumps. These valves will bypass total system flow when required and will also balance system pressure for multiple gun operations. Standard valves feature Brass bodies with Buna O-rings and stainless valve seats and plunger ball. Rated to 160° F. (200° F. available on special request). D

C62B features Viton®/Teflon O-rings and diaphragm and is rated to 200° F.

PUMP REPAIR KITS Part No. Flow Rate Pressure Range Ports WN C22A 3-10 GPM 500-1000 PSI 3/4" FPT WN C23A 10-20 GPM 500-1000 PSI 1" FPT WN C24A 20-40 GPM 500-1000 PSI 1-1/4" FPT WN C62B 1-14 GPM 500-2500 PSI 3/4" FPT

For Pump Valve Kit RETAIL Diaphragm Kit (Buna) D10 WN D10V5-2 211.72 WN D10D5 D15 WN D15V5 451.58 WN D15D5 H25 WN D25V5 332.32 WN D25D5 D35 WN D35V5 428.80 WN D35D5 D40 WN D40V5 600.32 WN D40D5 D10 WN D10K5 Complete Repair Kit, D10............................ H25 WN D25K5 Complete Repair Kit, H25............................

Wt. RETAIL 3 lbs. $ 329.64 6 lbs. 456.94 8 lbs. 1053.24 4 lbs. 367.16

(Note: Valves with other pressure ranges are available on request.)

(800) 228-9666

$ 73.70 300.16 119.93 202.34 160.80 249.24 402.00

Note: Repair kits of other materials are available on special request.

Viton® is a registered trademark of DuPont Performance Elastomers

DULTMEIER SALES • OMAHA, NE

RETAIL

•

www.dultmeier.com

• DAVENPORT, IA

(800) 553-6975

E0607

222

Jetting/Sewer Hydro-Excavation Pumps

High flow, High Pressure Pumps are the ideal choice for pipe cleaning, water jetting, sewer cleaning, hydrostatic testing, tank cleanout and plant washdown. Pumps from Cat Pumps®, General and Giant Industries. All plunger pumps shown feature brass, stainless, aluminum/bronze or nickel-plated manifolds as noted. Triplex ceramic plunger design. Pressure and safety relief valves as well as pulsating valves are available for many models. Note: All pumps are standard with Right Hand shaft when facing pump manifold or some feature dual shaft design. Left hand models are also available. GU LP200 Left Hand Shown

RTF/RTJ Series

D D

KE Series Right Hand Shown

CC 3560 Dual Shaft Part No. Flow Pressure

RPM

Brand

UD CC3020S 8 3000 1450 Udor CC 1560 8 4000 1140 Cat Pumps® AR RTP30N 8 7250 1000 AR CC 660 10 3000 1430 Cat Pumps® UD CKC3820S 10 3000 1450 Udor IP KE22A 10 3600 1450 General CC 3507 10 5000 915 Cat Pumps® CC 3550 10 6000 940 Cat Pumps® CC 6810 10 10,000 600 Cat Pumps® CC 1580 12 3000 1180 Cat Pumps® IP KE24A 12 3000 1450 General GU MP4124 12 3000 1420 Giant CC 3517 14 3600 800 Cat Pumps® GU LP301A 14 4000 1270 Giant UD NX55/200 14.8 3000 1450 Udor GU LP400 15 3600 1000 Giant IP KE28A 16 2200 1450 General AR RTX70 18.5 2000 1450 AR AR RTJ70 18.5 4000 1000 AR UD NX75/150 19.8 2200 1450 Udor UD VX75/280R 19.8 4000 1000 Udor CC 2510 20 2000 1450 Cat Pumps® GU LP200 20 2900 1000 Giant CC 3560 20 4000 1160 Cat Pumps® IP HF25A 20 4000 1000 General AR RTX85 22 2200 1450 AR CC 2530 25 1200 1025 Cat Pumps® UD VX95/280R 25 4000 1250 Udor GU P536 26 1750 1450 Giant GU LP255 26 2200 950 Giant AR RTX100 26.5 1800 1450 AR CC 3570 30 3000 1080 Cat Pumps® IP KS28A 30 3600 1500 General UD VX130/160 33 2300 1000 Udor IP KF36A 40 1900 1000 General CC 6835 40 3000 625 Cat Pumps® UD VX160/130 41 2000 1000 Udor UD VXXB200/150R 53 2200 1000 Udor CC 6760 60 1200 520 Cat Pumps® CC 6775 75 1200 520 Cat Pumps® GU GP7255A 80 2000 850 Giant IP MK60A 90 2500 1500 General CC 67102 100 1000 680 Cat Pumps® IP MK65A 107 2200 1500 General

IND

DULTMEIER SALES • OMAHA, NE

Manifold

Wt.

IND 40 lbs.

Brass Brass Forged Brass Bronze Brass 420SS Nickel/Bronze Nickel/Bronze Stainless Bronze 420SS Alum/Bronze Nickel/Bronze Alum/Bronze Brass Alum/Bronze 420SS Forged Brass Brass Brass Brass Brass Alum/Bronze Brass/Stainless 420SS Forged Brass Brass Brass Brass Brass Forged Brass Nickel/Bronze Nickel/Cast Brass 420SS Stainless Brass Stainless Brass Brass Nickel/Cast Nickel/Cast Stainless Nickel/Cast

(800) 228-9666

60 lbs. 177 lbs. 44 lbs. 39 lbs. 88 lbs. 152 lbs. 124 lbs. 377 lbs. 60 lbs. 88 lbs. 72 lbs. 152 lbs. 110 lbs. 67 lbs. 105 lbs. 88 lbs. 72 lbs. 198 lbs. 67 lbs. 128 lbs. 80 lbs. 119 lbs. 145 lbs. 132 lbs. 72 lbs. 79 lbs. 128 lbs. 93 lbs. 119 lbs. 72 lbs. 139 lbs. 212 lbs. 128 lbs. 220 lbs. 355 lbs. 128 lbs. 137 lbs. 335 lbs. 335 lbs. 375 lbs. 862 lbs. 364 lbs. 862 lbs.

•

Net Ea.

$ 888.42 CALL 4963.36 CALL 1101.48 5029.02 CALL CALL CALL CALL 5122.82 7199.82 CALL 10682.48 4095.04 9089.22 4980.78 1825.08 5286.30 4095.04 6296.66 CALL 11151.48 CALL 8086.90 1834.46 CALL 6296.66 7808.18 8712.68 1841.16 CALL 14130.30 6296.66 6957.28 CALL 6296.66 6862.14 CALL CALL 21651.72 23144.48 CALL 23412.48

www.dultmeier.com

SERVICE & REPAIRS Did you know? We can service almost every brand of pump we sell in our catalog.

Call us at 1-800-228-9666 (Omaha, NE) for a quote!

• DAVENPORT, IA

(800) 553-6975

E0868

Pump Unit Systems

223

Medium & High Pressure Pumping Units D

Pumping Units for Industrial Cleaning, Rinse Arches, Tire Applicators, Wax Arches, Presoak Arches or Multiple Gun Cleaning Stations. Features: Plunger Pumps belt driven by Baldor Motors. All systems include: • Pump • Motor • Pressure Regulator Valve • V-Belts • Pulleys • Belt Tightener • Pulsation Dampener (Not on all units) • Pressure Gauge • Stainless steel belt Guard • Stainless steel heavy gauge Baseplate • Pre-plumbed • All motors are 208/230/460 Volt, 3 phase. (1 phase available on special quote.) Note: Motor starters and electrical panels are available as an option if required. Medium Pressure Models Part No. Pump GPM

PSI Motor HP Wt./Lbs. RETAIL

Part No. Pump GPM

PSI Motor HP Wt./Lbs. RETAIL

DU PM390 CAT 12 600 5 DU PM623 CAT 6 1200 5 DU PM820 CAT 10 1000 7-1/2 DU PM900 Arimitsu 10 1000 7-1/2 DU PM820-TS * CAT 10 1000 7-1/2 DU PM1010 CAT 13 700 7-1/2 DU PM1520 CAT 15 1000 10 DU PM2520 CAT 25 800 15 DU PM3535 CAT 30 1000 20 * Standard with Poly Tank / S.S. Frame. High Pressure Models (No Pulsation Dampeners)

PM820-TS Baldor Motor

DU PM540 DU PM550 DU PM570 DU PM70 DU PM75 DU PM80 DU PM650 DU PM580 DU PM590 DU PM680 DU PM1050-15 DU PM660 DU PM690 DU PM720

PM580 Shown

AR CAT CAT CAT AR AR CAT AR AR AR CAT CAT AR AR

4.0 4000 4.5 3000 4.5 4000 4.5 5000 5.5 4000 5.5 5100 7.0 3000 7.0 3200 7.0 4000 8.0 3500 10 2000 10 2900 11 3000 13 2200

175 $ 3546.98 175 3276.30 225 4606.92 225 3710.46 225 6813.90 225 4809.26 280 6825.96 400 10037.94 625 13008.72

350 $ 4038.76 290 3634.08 350 6130.50 390 6858.12 350 4576.10 390 4979.44 350 6575.38 350 4376.44 390 5295.68 390 4763.70 350 6350.26 390 7453.08 450 5563.68 390 5037.06

15 10 15 15 15 20 15 15 20 20 15 20 25 20

— Pump Stands & Tanks also available —

Wanner Pump Units High Volume, High Pressure Pumping Units featuring Wanner Hydra-Cell Diaphragm Pumps. Ideal for prep units, presoak arches and the rigors of “reclaim water”. PMD10

Standard Features: • Hydra-Cell Pump • TEFC 3-phase Motor • Heavy-gauge Stainless Baseplate • Pressure Bypass Valve • Pulleys and V-Belts • Stainless Belt Guard • Belt Tightener • Pressure Gauge • Pre-plumbed • All motors are 208/230/460 Volt, 3 phase. (Single phase motors available on special request.) Part No. PMD10-TS

We Custom Build Pumping Units to 60 GPM Flow Rates and 5000 PSI Pressure Ranges. - Call Us for a Quote -

IND

DULTMEIER SALES • OMAHA, NE

(800) 228-9666

•

Featuring Hydra-Cell Diaphragm Pumps

Wt./Lbs.

RETAIL

DU PMD10 8 GPM 1000 PSI 7-1/2 245 DU PMD15 13 GPM 1500 PSI 15 575 DU PMD25 20 GPM 1000 PSI 15 575 DU PMD40 * 36 GPM 800 PSI 20 900 DU PMD10-TS D10 Pump Unit with Tank & SS Stand......... DU PMD15-TS D15 Pump Unit with Tank & SS Stand......... DU PMD25-TS H25 Pump Unit with Tank & SS Stand......... DU PMD40-TS * H35 Pump Unit with Tank & Painted Stand * Rated to 1000 PSI with 25 HP Motor.

$ 4249.14 10126.38 8517.04 13933.32 6681.24 11849.62 10430.56 15359.08

www.dultmeier.com

Max Flow

Max. Pressure

• DAVENPORT, IA

(800) 553-6975

E0967

Pressure Washers

224

(PRESSURE FEED)

Designed with Upstream Soap Injectors for High Pressure Soap Injection Versatile, High Pressure Wash Units. Ideal for a wide variety of cleaning requirements. Features Ceramic Plunger Pumps and 3 or 5 HP TEFC motors. Close-coupled feature eliminates the need for belts or pulleys and provides for smooth, quiet operation.

3 & 5 HP Pressure Wash Units 3-HP Units are rated to 3.6 GPM @ 1200 PSI. Available with either CAT or General/Interpump Plunger pumps. Wash units are complete as shown and include a manual chemical injector and rinse/soap valve for accurate injection of detergents into the system.

PMC1553 5 HP Unit

5-HP Units are rated to 4 GPM @ 1800 PSI. Available with either CAT or General/Interpump Plunger pumps. Wash units are complete as shown and include a chemical injector and rinse/soap valve for accurate injection of detergents into the system.

Standard with pressure unloader valve, trigger style shutoff gun, insulated extension, 50' of 3/8" high pressure hose, gun swivel, pressure pop-off valve, pressure gauge and spray nozzle. All units are pre-assembled on heavy gauge stainless steel base plates and are tested prior to shipping. Part No.

HP Phase

DU PM1301C 3 DU PM1303C 3 DU PM1201B-G 3 DU PM1203B-G 3 DU PMC1551 5 DU PMC1553 5 DU PM1251B-G 5 DU PM1253B-G 5 CE M1P018-C-B0S CE M2P032-C-B3S CE M1P009-C-A9 CE M1P018-C-B0

Motor Starters Optional

Giant & Hypro Pumps Also Available

Volts

Pump

PSI GPM

Wt.

RETAIL

Single 115/230 Cat 1200 3.6 100 lbs. $ 3311.14 Three 230/460 Cat 1200 3.6 90 lbs. 2716.18 Single 115/230 General 1200 3.6 100 lbs. 2946.66 Three 230/460 General 1200 3.6 90 lbs. 2303.46 Single 230 Cat 1800 4.0 160 lbs. 3347.32 Three 230/460 Cat 1800 4.0 135 lbs. 2730.92 Single 230 General 1800 4.0 160 lbs. 3237.44 Three 230/460 General 1800 4.0 135 lbs. 2528.58 Motor Starter, 3 HP - 1 Phase, 230 Volt............... 321.60 Motor Starter, 5 HP - 1 Phase, 230 Volt............... 487.76 Motor Starter, 3 HP - 3 Phase, 230 Volt............... 286.76 Motor Starter, 5 HP - 3 Phase, 230 Volt............... 321.60

Electric Drive Pressure Washers Electric Motor Driven Pressure Washers with Hand Carry, Wall Mount or Wheeled Cart options. High quality AR or General Plunger pumps (Cat Pumps are optional on many models). Standard Features Include: Aircraft grade, tubular aluminum frames • Pressure unloader valve • Thermo sensor valve • Chemical injector • 50’ Hose • Spray wand with quick coupler nozzles • 1-1/2 HP through 3 HP models can ship via UPS with minor assembly required • 6 HP and larger units ship via truck • Wheeled cart models feature pneumatic tires and shock absorbing feet • 115 Volt models include 36’ GFCI power cords • 230 Volt models include 12’ power cord without plug. (Optional Motor Starters are available if needed).

HC2015G Electric Hand Carry

A suffix at end of part number is AR Pump, G suffix is General Pump Note: Auto Stop/Start Panels Available On Most Units Electric Hand Carry Models Part No. GPM PSI

BI HC2015G BI HC3010G BI HC3015G

2.0 3.0 3.0

1300 1000 1500

Electric Wall Mount Models Part No. GPM PSI

BI WM2015G BI WM3010G BI WM3015G BI WM4020A

2.0 3.0 3.0 4.0

1300 1000 1500 2000

Electric Wheeled Cart Models Part No. GPM PSI

BI EE2015G BI EE3010G BI EE3015G BI EE4020G BI EE3530G BI EE4030A BI EE4035A BI EE3540A

IND

2.0 3.0 3.0 4.0 3.5 4.0 4.0 3.5

1300 1000 1500 2000 3000 3000 3500 4000

Motor

2HP / 115V / 1PH 2HP / 115V / 1PH 3HP / 230V / 1PH

Motor

2HP / 115V / 1PH 2HP / 115V / 1PH 3HP / 230V / 1PH 6HP / 230V / 1PH

Motor

2HP / 115V / 1PH 2HP / 115V / 1PH 3HP / 230V / 1PH 6HP / 230V / 1PH 7.5HP / 230V / 1PH 7.5HP / 230V / 1PH 10HP / 230V / 1PH 10HP / 230V / 1PH

DULTMEIER SALES • OMAHA, NE

Wt.

RETAIL

98 lbs. $ 1144.36 98 lbs. 1195.28 125 lbs. 1555.74

Wt.

WM2015G Wall Mount

RETAIL

98 lbs. $ 1236.82 98 lbs. 1208.68 125 lbs. 1427.10 230 lbs. 2504.46

Wt.

RETAIL

105 lbs. $ 1236.82 105 lbs. 1318.56 130 lbs. 1595.94 235 lbs. 2717.52 250 lbs. 2968.10 250 lbs. 3107.46 265 lbs. 3364.74 265 lbs. 3458.54

(800) 228-9666

•

EE2015G Electric Wheeled Cart

www.dultmeier.com

• DAVENPORT, IA

(800) 553-6975

E0295

Gas Engine Pressure Wash Units

225

Direct Drive Design - No Need for Belts or Guards. Pumps Bolt Directly to the Honda Engines PMC-SF35C (Aluminum 2 Wheel Cart) 2.5 GPM @ 2700 PSI

PM2565C (Powder-Coat 2 Wheel Cart) 3.0 GPM @ 2500 PSI

50 ft. Hose

25 ft. Hose

Standard Features Include: Triplex Plunger Pumps • Adjustable pressure regulators • Trigger style shut-off wands • Chemical injectors • 25’ or 50’ hose assemblies as noted • Pneumatic tires on wheeled units • Skid units include base with rubber feet for lower vibration • Aircraft grade aluminum or powder-coated frames as noted.

SE3027HG (Powder-Coat Skid Frame) 3.0 GPM @ 2700 PSI

50 ft. Hose D D

SPPS4042A (Aluminum Skid Frame) 4.0 GPM @ 4200 PSI

PM9000G (Powder-Coat 2 Wheel Cart) 4.0 GPM @ 4000 PSI

25 ft. Hose

Wheeled Models Flow Max.

Honda Part No. GPM PSI Pump Engine Hose BI PMC-SF35C 2.5 2700 AR GC190 25' DU PMC-3228 2.5 3400 CAT GX200 25’ BI PM2565C 3.0 2700 COMET GX200 25’ BI PMC-950H 3.5 3800 AR GX270 50’ DU PM5500G 4.0 4200 CAT GX390 50' DU PM9000G 4.0 4000 GP GX390 50’

50 ft. Hose

Skid Models D

IND

DULTMEIER SALES • OMAHA, NE

Flow Max. Part No. GPM PSI Pump BI SE3027HG 3.0 2700 GP BI SE3032HA 3.0 3200 AR BI SPPS4042A 4.0 4200 AR

(800) 228-9666

•

www.dultmeier.com

Honda Engine Hose GX200 50' GX270 50' GX390 25’

• DAVENPORT, IA

Frame Aluminum Aluminum Powder-Coat Powder-Coat Aluminum Powder-Coat

Wt 95 lbs. 86 lbs. 95 lbs. 125 lbs. 143 lbs. 175 lbs.

Frame Powder-Coat Powder-Coat Aluminum

Wt RETAIL 95 lbs. $ 1342.68 145 lbs. 1464.62 185 lbs. 1656.24

(800) 553-6975

RETAIL $ 805.34 939.34 1070.66 1315.88 1609.34 1506.16

E0294

Gas Engine Pressure Washers

226

Pulley & Gear Design - Skid or 2 Wheel Cart Gas Engine Pressure Washers with pulley or gearbox driven pumps. Belt/Pulley Driven Models allow pumps to run at slower RPM for longer life. Gear Box Models allow for pumps to be direct driven but also at slower RPM. Either style is the best choice for contract cleaners or where units will be used most every day. PM3000G-WH Gear Box Drive (Aluminum Cart) 4 GPM @ 4000 PSI

PM6000G Belt Drive (Aluminum Cart) 4 GPM @ 3500 PSI

50 ft. Hose

Standard Features Include: Triplex Plunger Pumps • Adjustable pressure regulators • Trigger style shut-off wands • Chemical injectors • 50’ hoses • Pneumatic tires on wheeled units • Skid units include base with rubber feet for lower vibration • Aluminum or powder-coated frames as noted • 12 Volt starters on engines as noted.

PM8500G Belt Drive (Aluminum)

SEB4040HG Belt Drive (Powder-Coat Skid) 4 GPM @ 4000 PSI D

6-Gallon Remote Fuel Tank Included, but Not Shown

Battery & Case Included with this Unit

50 ft. Hose

Wheeled Models Flow Max.

Honda Part No. GPM PSI Pump Engine BI EG3020HCP 3.0 2000 CAT GX160 DU PM3000G-WH 4.0 4000 CAT GX390 DU PM6000G 4.0 4200 CAT GX390 DU PM8000G 4.0 4000 General GX390 DU PM8500G 4.5 5000 General * GX630 DU PM8700G 5.0 5000 Comet ** GX630

Drive Gear Gear Belt Belt Belt Belt

Frame Aluminum Aluminum Aluminum Aluminum Aluminum Aluminum

Wt 165 lbs. 175 lbs. 200 lbs. 200 lbs. 265 lbs. 250 lbs.

RETAIL $ 2040.82 2580.84 2351.70 2190.90 5628.00 4970.06

Drive Frame Wt Belt Powder-Coat 200 lbs. Gear Powder-Coat 200 lbs.

RETAIL $ 2235.12 2580.84

* 12 Volt Starter & Battery Included. ** Electric Start But Battery Not Included.

Skid Models

Flow Max. Part No. GPM PSI Pump BI SEB4040HG 4.0 4000 General BI SEG4040HCP 4.0 4000 CAT

IND

Honda Engine GX390 GX390

DULTMEIER SALES • OMAHA, NE

(800) 228-9666

•

www.dultmeier.com

PM8700G 50’ Hose Wired to Electric Start - But Battery Is Not Included

• DAVENPORT, IA

(800) 553-6975

E1089

Gas Engine Pressure Washers

227

Pulley & Gear Design With 4-Wheel Roll Cages Direct, Gear and Pulley Drive Pressure Washers with 4-wheel, heavy-duty roll cage frames. An ideal choice for contract cleaners, industrial applications, agriculture cleaning, oil field use and many more. 65203, 65204, 65206, 65209

Mounting Plate for Hose Reels

D D

25 ft. Hose

50 ft. Hose 65200 65201

All Models Feature: Triplex Plunger Pumps • Honda or Kohler engines • Adjustable pressure control valves • Chemical injectors • Pneumatic tires • Powder-coated steel frames • Spray wands with 50ft. hose. Note: † Some models feature front mounting plate for 80225 or 80226 hose reels. * Larger models come with 12-volt starters and batteries.

Hose Reel Mounting Plates

65213 65214 65215 D D

Battery Holder (Less Battery)

Fuel Tank

PM7000G & PM7500G

Fuel Tank

50 ft. Hose

Roll Cage Models

Max. Part No. Flow PSI Pump Engine FN 65201 2.5 GPM 3600 AAA Direct Kohler CH270 FN 65200 2.5 GPM 3600 AAA Direct Honda GX200 FN 65204 3.5 GPM 4000 AAA Direct Kohler CH395 FN 65203 3.5 GPM 4000 AAA Direct † Honda GX270 FN 65206 4.0 GPM 4000 AAA Direct † Honda GX390 FN 65209 4.0 GPM 4400 AAA Belt † Honda GX390 FN 65213 5.0 GPM 5000 Comet Gear Honda GX690 DU PM7500G 5.0 GPM 5000 Comet Belt * Honda GX690 DU PM7000G 5.0 GPM 5000 General Belt * Honda GX690 FN 65214 5.0 GPM 6000 Comet Gear Kohler CH750 FN 65215 4.0 GPM 7000 Comet Gear Kohler CH750 FN 80225 Hose Reel, 3/8” x 100’ Capacity................................... FN 80226 Hose Reel, 3/8” x 200’ Capacity................................... † Comes with Mounting Plate for 80225 or 80226 Hose Reels. * 12 Volt Starter and Battery Included on These Models.

IND

DULTMEIER SALES • OMAHA, NE

(800) 228-9666

•

www.dultmeier.com

Wt RETAIL 114 lbs. $ 1003.66 110 lbs. 1192.60 172 lbs. 1381.54 165 lbs. 1747.36 179 lbs. 1825.08 194 lbs. 2018.04 322 lbs. 5382.78 290 lbs. 5334.54 290 lbs. 5745.92 330 lbs. 6935.84 330 lbs. 7265.48 22 lbs. 160.47 31 lbs. 176.55

• DAVENPORT, IA

(800) 553-6975

50 ft. Hose

E1230

228

Portable Hot Water Pressure Washers • Precharged Tanks

Portable Hot Water Pressure Washers for tough industrial cleaning. Professionally engineered to combine Hot Water, Pressure and Volume to provide efficient and effective cleaning. Available in oil-fired portable units, electric or gas drive. Designed to provide water temperatures to 180° F. All units feature General Plunger Pumps.

Oil Fired Pressure Washers - Electric Motor Drive Portable Oil-Fired Washers are ideal for a wide variety of cleaning applications. Truck and trailer wash, sidewalk and parking lot cleaning as well as equipment and buildings. Compact and ready-to-use. Rated output to 180° F. Standard Features Include: General plunger pumps • Trigger wand assembly • 50’ of high pressure hose with quick couplers • Downstream chemical injector • Pressure regulator valve • Safety pop-off valve • 1/2” Schedule 80 coils • Heavy-duty, 2 or 4 wheel frames with hangers for hose and wand • Fuel tank capacity of 7-1/2 or 10 gallons • Adjustable thermostat • All units operate on Diesel or Kerosene fuel • Pre-plumbed and tested prior to shipping • Single phase, TEFC motors, (Three phase available).

DP3 Series

Made In USA

Part No.

Description RETAIL

DU DP3-1000 DU DP3-2000 DU DP3-2800 DU DP4-3000 EZ 2435EGP EZ 3035EGP

3.0 GPM @ 1000 PSI, 2 HP / 115V Motor. 2-Wheel Cart. Dimensions are 30” W x 38” L x 40” H. 7-1/2 Gallon Fuel Tank. Wt. 340 Lbs. Made in USA............. $ 3888.68 3.0 GPM @ 2000 PSI, 4 HP / 230V Motor. 2-Wheel Cart. Dimensions are 30” W x 38” L x 40” H. 7-1/2 Gallon Fuel Tank, Wt. 380 lbs. Made in USA.............. 4081.64 3.0 GPM @ 2800 PSI, 6 HP / 230V Motor. 2-Wheel Cart Dimensions are 30” W x 38” L x 40” H. 7-1/2 Gallon Fuel Tank. Wt. 475 lbs. Made in USA.............. 5165.70 4.0 GPM @ 3000 PSI. 8 HP / 230V, 2-Wheel Cart. Dimensions are 30” W x 38” L x 40” H. 7-1/2 Gallon Fuel Tank. Wt. 475 lbs. Made in USA............. 5980.42 3.5 GPM @ 2400 PSI. 5 HP / 220V Motor. 4-Wheel Cart. Dimensions are 32” W x 46” L x 42” H. 10 Gallon Fuel Tank. Wt. 465 lbs. Made in Canada....... 4222.34 3.5 GPM @ 3000 PSI. 7.5 HP / 220V Motor. 4-Wheel Cart. Dimensions are 32” W x 46” L x 42” H. 10 Gallon Fuel Tank. Wt. 500 lbs. Made in Canada....... 4752.98

EZ Series

Made In Canada D

Oil Fired Pressure Washers - Gas Engine Driven Portable Oil-Fired Pressure Washers have the same standard features as the electric motor units above but with the added benefit of Gas or Diesel engines when electricity may not be available. Models feature Briggs, Honda or Kohler gas engines or Kohler diesel engines. Burner motors are 12 volt. 6.5 hp engine is rope pull start. All others have 12 volt starters, (Battery is not included). All models come on 4-Wheel carts. 7-1/2 or 10 gallon fuel tanks as noted.

DG Series

Made In USA

EZ Gas Series Made In Canada

Part No.

DU DG3-2500 DU DG4-3000 DU DG3-4000 EZ 4035GK12 EZ 4035GH12 EZ 4035DK12

Description RETAIL

3.0 GPM @ 2500 PSI. 6-1/2 HP Briggs Gas Engine.Rope Pull. Dimensions: 32" W x 48” L x 40” H. 7-1/2 Gallon Fuel Tank. Wt. 530 lbs. Made in USA....... $ 4817.30 4.0 GPM @ 3000 PSI. 11 HP Honda Gas Engine. 12V Starter. Dimensions: 32” W x 48” L x 40” H. 7-1/2 Gallon Fuel Tank. Wt. 575 lbs. Made in USA...... 6397.16 3.5 GPM @ 4000 PSI. 13 HP Honda Gas Engine. 12V Starter. Dimensions: 32” W x 48” L x 40” H. 7-1/2 Gallon Fuel Tank. Wt. 575 lbs. Made in USA....... 6437.36 3.5 GPM @ 4000 PSI. 14 HP Kohler Gas Engine. 12V Starter. Dimensions: 32” W x 46” L x 42” H. 10 Gallon Fuel Tank. Wt. 400 lbs. Made in Canada...... 4400.56 3.5 GPM @ 4000 PSI. 13 HP Honda Gas Engine. 12V Starter. Dimensions: 32” W x 46” L x 42” H. 10 Gallon Fuel Tank. Wt. 400 lbs. Made in Canada...... 5110.76 3.5 GPM @ 4000 PSI. 9.8 HP Kohler Diesel Engine. 12V Starter. Dimensions: 32” W x 46” L x 42” H. 10 Gallon Fuel Tank. Wt. 400 lbs. Made in Canada...... 10841.94

Vertical Inline Tanks Tank Capacity Connection Part No. Gallons NPTM Dimensions Wt. RETAIL WO MAX-03 .35 1/2” 7.9" H x 5.1" D 6.8 lbs. $ 42.08 WO MAX-05 .50 3/4” 8.5” H x 5.1” D 10.4 lbs. 58.96 WO MAX-20 2.0 3/4” 11.4” H x 8” D 5.1 lbs. 71.69 WO MAX-30 3.2 3/4” 15.4” H x 9.1” D 7.1 lbs. 87.77 WO MAX-45 4.5 3/4” 15.4” H x 11” D 8.2 lbs. 104.52 WO MAX-60 6.0 3/4” 16.3” H x 11.6” D 10.6 lbs. 121.27 WO MAX-100 10.0 3/4” 21.7” H x 11.6” D 15 lbs. 155.11

Pressure Tanks Precharged with Nitrogen

Vertical Inline Tanks with Base Tank Capacity Connection Part No. Gallons NPTM Dimensions Wt. RETAIL WO MAX-215 14 1” 23.6" H x 15" D 24.3 lbs. $ 247.90 WO MAX-220 20 1” 30.7” H x 15” D 32.2 lbs. 290.78 WO MAX-225 28 1” 39.2” H x 15” D 40.6 lbs. 379.22 WO MAX-230 32 1” 44.1” H x 15” D 50.1 lbs. 462.30 WO MAX-235 34 1-1/4” 29.5” H x 22” D 54.1 lbs. 527.96 WO MAX-245 44 1-1/4” 36” H x 22” D 61.3 lbs. 684.74

Horizontal Tanks with Base

Features: Precharged with Nitrogen – holds pressure much longer and more consistently than air • NSF/ANSI 61 rated • Corrosion-resistant baked epoxy Coating • Leak-free, O-ring sealed air valve cap • 100% Pressure tested and factory pre-charged to 30 PSI • Maintenance-Free operation • 304 Stainless Steel water connection • Horizontal or Vertical models available • Blue is standard color but green and tan are also available • Maximum Working Pressure is 150 PSI • Maximum Working Temperature is 195°F. • Polypropylene liner & butyl diaphragm for ensured longevity.

Tank Capacity Connection Part No. Gallons NPTM Dimensions Wt. RETAIL WO MAXH-45 4.5 3/4” 15.4" L x 12" D 9.7 lbs. $ 184.59 WO MAXH-60 6.0 3/4” 16.3” L x 12.6” D 11.9 lbs. 210.38 WO MAXH-100 10 3/4” 21.7” L x 12.6” D 16.4 lbs. 274.70 WO MAXH-215 14 1” 22” L x 17” D 24.5 lbs. 330.98 WO MAXH-220 20 1” 32” L x 17” D 32.5 lbs. 379.22

IND

DULTMEIER SALES • OMAHA, NE

(800) 228-9666

More Sizes Available!

•

www.dultmeier.com

• DAVENPORT, IA

(800) 553-6975

E0297

Stationary Washers & Cleaners

229

Stationary Natural Gas or LP Fired Pressure Washers are engineered to provide maximum cleaning efficiency. Strong enough to tackle the most demanding cleaning jobs. Designed to provide water temperatures to 180° F. All units feature chemical solution system for injecting cleaning chemicals into the pumping line. All units feature General Plunger Pumps driven by electric motors.

Provides Maximum Cleaning Efficiency!

Standard Features Include: Trigger spray gun with wand • 50’ high pressure hose with quick couplers • Unloader valve • Safety pop-off valve • Flow switch for burner shutdown • Schedule 80 1/2” Coil • Adjustable Thermostat • Upstream high pressure chemical injection system • Low water shut-off • Draft diverters available as an option. Gas valves are 1”. Note: All units are fired and tested. (Please specify LP or Natural Gas). 5 Year prorated coils. Made in USA.

Part No.

DU DS3-2400 DU DS3-2400/3 DU DS4-3000 DU DS4-3000/3 DU DS5-3000 DU DS7-3000 DU DS10-2000 DU DS10-3000 DU Z01-00100 DU Z01-00101 DU Z01-00105 DU Z01-00104 DU 12EIG DU 12AUTO

Flow

PSI

Wt.

RETAIL

3 GPM 2400 5 HP / 1 PH 725 lbs. $ 6134.52 3 GPM 2400 5 HP / 3 PH 725 lbs. 6501.68 4 GPM 3000 8 HP / 1 PH 800 lbs. 7233.32 4 GPM 3000 8 HP / 3 PH 800 lbs. 7822.92 5 GPM 3000 10 HP / 3 PH 860 lbs. 7879.20 7 GPM 3000 15 HP / 3 PH 1390 lbs. 11983.62 10 GPM 2000 15 HP / 3 PH 1640 lbs. 13535.34 10 GPM 3000 20 HP / 3 PH 1660 lbs. 13992.28 10” Draft Diverter as Add On for 3 & 4 GPM...... 119.93 12” Std. Draft Diverter as Add On for 5-10 GPM. 181.91 10” Motorized Draft Diverter, 3 & 4 GPM Units... 353.76 12” Motorized Draft Diverter, 5-10 GPM Units.... 373.86 Electronic Ignition as Add On............................. 328.00 Automatic Stop/Start Control.............................. CALL

50 ft. Hose

Easy to Use, Easy to Maintain, Easy to Service, Efficient to Run and Safe Buffalo Series Standard Features: General plunger pumps • Trigger spray gun with wand and nozzles • 50’ of high pressure hose • Pressure relief valve • High pressure chemical injection • Water float tank • Quick Clean burners • Adjustable air flow vents • Auto On/Off with delay • 11 Gauge welded steel frame with powder coat finish • Adjustable thermostat • Schedule 80 or Schedule 160 coils sealed in ceramic blanket and stainless housing • TEFC 1 Phase or 3 Phase motors • Natural Gas or Propane, (Specify) • Belt drive pumps all units but EZ2435E1 and EZ3035E1 which are * Direct Drive • Made in Canada, ships from U.S.

Auto On/Off with Delay

Part No.

Description RETAIL EZ 2435E1 * 3.5 GPM @ 2400 PSI. 5 Hp/1 Phase/220V. Rated to 290,000 BTU. 46” L x 32” W x 46” H. Wt. 400 lbs............................ $ 5050.46 EZ 3035E1 * 3.5 GPM @ 3000 PSI. 7.5 Hp/1 Phase/220V. Rated to 290,000 BTU. 46” L x 32” W x 46” H. Wt. 415 lbs......................... 5697.68

50 ft. Hose

EZ 30041 EZ 30043 EZ 40043 EZ 60043

4.0 GPM @ 3000 PSI. 7.5 Hp/1 Phase/220V. Rated to 390,000 BTU. 55” L x 30” W x 48” H. Wt. 800 lbs........................... 4.0 GPM @ 3000 PSI. 7.5 Hp/3 Phase/208V/440V/575V. Rated to 390,000 BTU. 55” L x 30” W x 48” H. Wt. 800 lbs......... 4.0 GPM @ 4000 PSI. 10 Hp/3 Phase/208V/440V/575V. Rated to 390,000 BTU. 55” L x 35” W x 48” H. Wt. 1100 lbs........ 4.0 GPM @ 6000 PSI. 20 Hp/3 Phase/208V/440V/575V. Rated to 390,000 BTU. 68” L x 32” W x 51” H. Wt. 1300 lbs........

6192.14 6192.14 7993.10 14033.82

EZ 30051 EZ 30053

5.0 GPM @ 3000 PSI. 10 Hp/1 Phase/208V. Rated to 390,000 BTU. 68” L x 32” W x 51” H. Wt. 1300 lbs........................ 5.0 GPM @ 3000 PSI. 10 Hp/3 Phase/208V/440/575V. Rated to 390,000 BTU. 68” L x 32” W x 51” H. Wt. 1300 lbs.......

6748.24 6748.24

EZ 36083

8.0 GPM @ 3600 PSI. 20 Hp/3 Phase/208V/440/575V. Rated to 720,000 BTU. 68” L x 32” W x 51” H. Wt. 1450 lbs.......

10303.26

EZ PRO-DH8 8” Draft Diverter for 290,000 to 390,000 BTU’s.................................................................................................................. EZ PRO-DH10 10” Draft Diverter for 510,000 to 720,000 BTU’s................................................................................................................

148.41 183.25

* Direct Drive These Models

IND

DULTMEIER SALES • OMAHA, NE

(800) 228-9666

•

www.dultmeier.com

• DAVENPORT, IA

(800) 553-6975

E0962

Hot Water Skid Units

230

Hot Water Skid Units Gas Engine or Diesel Engine Drive Hot Water Skid Units for a wide variety of cleaning needs. Available with Honda Gas, Kohler Gas or Kohler Diesel Engines. Heavy-duty frames are designed for removal with forklifts or permanent mount. Rated output to 180° F. No tanks on these units. All units made in Canada and ship from the Northeast United States. Standard Features: Belt driven, General Plunger Pumps • Adjustable pressure regulator • Pressure gauge • Chemical injector • 50’ Hose • Trigger gun and wand • 5 Spray nozzles • Schedule 80 and 160 coils sealed with ceramic blanket and stainless wrap • 12 Volt oil burner with cleanable fuel filter • 11 Gauge and 3/16” plate steel frame with 1-1/2” steel tubing • Powder-coated finish • 5 Year pro rated coil warranty.

D D

EZO3505G Gas Engine

EZO5005D Diesel Engine

Part No. EZ O3004G EZ O3504G EZ O3505G EZ O5005G EZ O3506G EZ O3008G

Hot Water Skid Units RETAIL 4.0 GPM @ 3000 PSI. 13 HP Honda Gas Engine. 61” L x 29” W x 65” H. Wt. 800 lbs.................... $ 7643.36 4.0 GPM @ 3500 PSI. 14 HP Kohler Gas Engine. 61” L x 29” W x 65” H. Wt. 800 lbs.................... 6922.44 5.0 GPM @ 3500 PSI. 20 HP Honda Gas Engine. 61” L x 29” W x 65” H. Wt. 800 lbs.................... 8881.52 5.0 GPM @ 5000 PSI. 24 HP Honda Gas Engine. 61” L x 29” W x 65” H. Wt. 800 lbs.................... 10087.52 6.0 GPM @ 3500 PSI. 24 HP Honda Gas Engine. 61” L x 29” W x 65” H. Wt. 800 lbs.................... 9150.86 8.0 GPM @ 3000 PSI. 24 HP Honda Gas Engine. 61” L x 29” W x 65” H. Wt. 800 lbs.................... 9945.48

EZ O3204D EZ O5005D EZ O3506D EZ O3508D

4.0 GPM @ 3200 PSI. 9.8 HP Kohler Diesel Engine. 71” L x 43” W x 58” H. Wt. 1800 lbs............ 5.0 GPM @ 5000 PSI. 26 HP Kohler Diesel Engine. 71” L x 43” W x 58” H. Wt. 1800 lbs............. 6.0 GPM @ 3500 PSI. 26 HP Kohler Diesel Engine. 71” L x 43” W x 58” H. Wt. 1800 lbs............. 8.0 GPM @ 3500 PSI. 26 HP Kohler Diesel Engine. 71” L x 43” W x 58” H. Wt. 1800 lbs.............

11810.76 16961.72 15012.02 17097.06

Pickup Skid Units Complete with Tank & Welded Steel Frame Complete Hot Water Skid Units with tank, frame and hose reel. Designed with winterization system to protect in freezing weather. Rated to 180° F. output. Gas or Diesel engines. Great choice for portable, high temperature cleaning. Can be easily removed from vehicles when required. Standard Features Include: Plunger pump with gearbox • Kohler Gas or Diesel Engine with electric start • 12-Volt oil burner • Chemical injector • 225 Gallon water tank • 10 Gallon anti-freeze tank • Hand crank hose reel with 50’ of hose • 36” Trigger wand assembly • Garden hose fill and recirculation system • Heavy-duty, powder-coated steel frame with fork lift slots and welded lifting eyes • Dimensions are 78” L x 42” W x 64” H.

Part No. Output

EZ 3504GKPSR EZ 3504DKPSR

IND

4 GPM @ 3500 PSI 4 GPM @ 3500 PSI

Engine

Wt./Lbs.

RETAIL

14 HP Kohler Gas 950 $ 8848.02 9.8 HP Kohler Diesel 950 15190.24

DULTMEIER SALES • OMAHA, NE

(800) 228-9666

•

www.dultmeier.com

• DAVENPORT, IA

(800) 553-6975

E1099

High Pressure Trailer Units

98A

231

High Pressure Trailer Units High Pressure Trailer Units for Mobile Cleaning Applications. Complete and ready-to-go. All units are self-contained and do not require outside power source. 200 Gallon Water Tank

COLD WATER

100 ft. of Low Pressure Hose & Reel

General Plunger Pump

TR5540/TR5550/TR8035

Heavy Duty Commercial Trailer Package TR Cold Water Units Feature: General Pump • Honda Engine with electric start • 12 Volt battery • Powder-coated steel trailer • Trailer lights, jack, safety chains, tool box, aluminum fenders & 15” tires • 15 Gallon remote gas tank • 25 Gallon chemical tank installed on trailer • High pressure manual hose reel with 150’ of hose • Low pressure manual hose reel with 100’ of hose • Pre assembled and tested prior to shipping • Dimensions are 136” L x 82” W x 63” H.

150 ft. of High Pressure Hose & Reel

Honda Engine

Hitch with Jack

Note: Jetter valves, nozzles and sewer hose are available for sewer cleaning applications if required.

15” Tires with Grease Bearings

15 Gallon Engine Fuel Tank

Lights 100 ft. of Low Pressure Hose & Reel

150 ft. of High Pressure Hose & Reel

HOT WATER TS4040

Vertical Burner Hot Shot Trailer Package TS4040 Hot Water Units Feature: General Pump • Honda Engine with electric start • 12 Volt battery • Powder-coated steel trailer • Trailer lights, jack,safety chains, tool box, aluminum fenders & 15” tires • Fuel tank attached to engine • 25 Gallon chemical tank installed on trailer • 8 Gallon burner fuel tank • High pressure manual hose reel with 150’ of hose • Low pressure manual hose reel with 100’ of hose • Pre assembled and tested prior to shipping • Dimensions are 136” L x 82” W x 63” H.

200 Gallon Water Tank

Standard Fuel Tank on Engine

Vertical Burner

8 Gallon Burner Fuel Tank

Hitch with Jack

Honda Engine 15” Tires with Grease Bearings

Lights Horizontal Burner 150 ft. of High Pressure Hose & Reel

200 Gallon Water Tank

100 ft. of Low Pressure Hose & Reel

HOT WATER TH4040/TH5535/TH5540/TH8035

Pro-Super Skid Trailer Package Honda Engine

15 Gallon Engine Fuel Tank

TH Hot Water Units Feature: General Pump • Honda Engine with electric start • 12 Volt battery • Powder-coated trailer • Trailer lights, jack, safety chains, tool box, aluminum fenders & 15” tires • 15 Gallon remote fuel tank (except on TH4040 which has tank or engine) • 15 Gallon burner fuel tank • 25 Gallon chemical tank is supplied but is not installed on the trailer • High pressure manual hose reel with 150’ of hose • Low pressure manual hose reel with 100’ of hose • Pre assembled and tested prior to shipping • Dimensions are 136” L x 82” W x 63” H.

Hitch with Jack

COLD WATER UNITS Part No. Lights

15 Gallon Burner Fuel Tank

15” Tires with Grease Bearings

BI TR5540 BI TR5550 BI TR8035

Rated Output

5.5 GPM @ 4000 PSI 5.5 GPM @ 5000 PSI 8.0 GPM @ 3500 PSI

Engine

Honda GX630 Honda GX690 Honda GX690

HOT WATER UNITS Part No.

Rated Output

Engine

BI TS4040 * 4.0 GPM @ 4000 PSI Honda GX390 BI TH4040 4.0 GPM @ 4000 PSI Honda GX390 BI TH5535 5.5 GPM @ 3500 PSI Honda GX630 BI TH5540 5.5 GPM @ 4000 PSI Honda GX630 BI TH8035 8.0 GPM @ 3500 PSI Honda GX690 * Vertical Burner Flue. Built-in gas tank attached to engine.

IND

DULTMEIER SALES • OMAHA, NE

(800) 228-9666

•

www.dultmeier.com

• DAVENPORT, IA

Wt.

RETAIL

1425 lbs. $ 12767.52 1450 lbs. 14390.26 1450 lbs. 13844.88 Wt.

RETAIL

1475 lbs. $ 12369.54 1475 lbs. 13878.38 1495 lbs. 15151.38 1495 lbs. 16157.72 1495 lbs. 16023.72

(800) 553-6975

E0788

High Pressure Pump Units • Generators

232

Wanner Pump Units

Hot Water Generators Featuring Hydra-Cell Diaphragm Pumps

Now you can have instant hot water from your cold water washer anytime you want it! Simply attach a “Hot Box” Hot Water Generator to your cold water pressure washer for instant hot water. Easily disconnected if you wish to go back to cold water cleaning. Available in sizes from 240,000 to 1,040,000 BTU’s. Units will develop at least 120° F. temperature rise above incoming water temperatures at the maximum flow rates shown. (Lower flow rates will increase output water temperatures accordingly).

H i g h Vo l u m e , H i g h Pressure Pumping U n i t s fe a t u r i n g Wanner HydraCell Diaphragm Pumps. Ideal for use with slurries, viscous products and hard-to-handle chemicals. Models are available in 18 GPM @ 1000 PSI, 20 GPM @ 1000 PSI or 36 GPM @ 800 PSI.

D D

Series 240 430 560 1010

Width 22" 22" 22" 30"

Length 22" 22" 22" 36"

Height 56" 56" 50" 64"

PMD10 Shown

Standard Features: Automatic burner shutdown • Adjustable thermostat control • Schedule 80 Pipe • Flow switch • Kerosene, Diesel, Natural or LP Gas Fired • 110-Volt, 12-Volt or Millivolt burners (Millivolt system creates its own electricity from thermocouple and pilot) • Quick Couplers • Heavy gauge construction • Pressure Relief Valve • Fuel Tank on Oil-Fired Units • On-Off switch • 5 Year prorated coil • Optional draft diverters. Max. Wt. Part No. BTU †GPM PSI Fuel Voltage Lbs. RETAIL DU 240 240,000 2.2 4000 Oil 110-Volt 400 $ 3354.02 DU 430 430,000 4.0 4000 Oil 110-Volt 520 3548.32 DU 560 560,000 5.0 4000 Oil 110-Volt 545 4179.46 DU 1010 1,010,000 10.0 4000 Oil 110-Volt 900 8151.22 DU 240G 240,000 2.2 3500 * Nat/LP Milli-Volt 400 3327.22 DU 375G 375,000 4.0 3500 * Nat/LP Milli-Volt 425 3753.34 DU 500G 500,000 5.0 3500 * Nat/LP Milli-Volt 460 4108.44 DU 1040G 1,040,000 10.0 3500 * Nat/LP Milli-Volt 1095 8545.18 DU Z01-00100 Draft Diverter as Add On for 3 & 4 GPM..................... 119.93 DU Z01-00101 Draft Diverter as Add On for 5-10 GPM....................... 181.91 DU 12VB 12-Volt Burner in place of 110 volt up to 360,000 BTU............. 357.78 DU 12VB1 12 Volt Burner in place of 110 volt up to 560,000 BTU & Larger.... 491.78 DU 12EIG Electronic Ignition as Add On............................................. 442.20 * Specify Natural Gas or LP Gas on These Units. † Maximum Gallons Per Minute with a 120° F. Temperature Rise.

Standard Features: Hydra-Cell Pump • TEFC 3-phase Motor • Heavygauge Baseplate • Pressure Bypass Valve • Pulleys and V-Belts • Belt Guard • Belt Tightener • Pressure Gauge • Pulsation Dampener • Pre-plumbed • All motors are 208/230/460 Volt, 3 phase. (Single phase motors available on special request.) Wt. Part No. Flow Pressure HP Lbs. DU PMD10 8 GPM 1000 PSI 7-1/2 245 DU PMD25 20 GPM 1000 PSI 15 575 DU PMD40 * 36 GPM 800 PSI 20 900 * With 25 HP Option, Rated to 1000 PSI.

Medium & High Pressure Pumping Units Pumping Units for Industrial Cleaning, Rinse Arches or Multiple Gun Cleaning Stations. Features: Cat Pumps® belt driven by Leeson Motors. All systems include: • Pump • Motor • Pressure Regulator Valve • V-Belts • Pulleys • Belt Tightener • Pulsation Dampener (Not on all units) • Pressure Gauge • D Belt Guard • Heavy gauge Baseplate • Preplumbed • All motors are 208/230/460 Volt, 3 phase. (1 Phase available on 5, 7.5 & 10 HP only for special quote.) Note: Motor starters and electrical panels are available as an option if required.

PM820 Shown

Coil Cleaning Unit A complete pump, hose and tank package for use with Coil Cleaning Acids. Ideal for descaling coils on water heaters, hot water generators and heat exchangers. This unit has the Little Giant Model 2-MD-SC magnetic-driven pump and motor unit with leak-proof, seal-less design. Pump Features: Polypropylene head and impeller, nitrile O-ring and is rated to 150° F. Maximum viscosity is 100 SSU. Voltage is 115 Volt AC, 1 Phase. Overall dimensions are 8" x 11" x 17". D

GKPK-SC

Part No. GJ GKPK-SC

Max. Flow 8.5 GPM

Package Includes: 5 gallon tank with cover as well as tubing and connection fittings. Max. Pressure 6.3 PSI

RETAIL $ 4249.14 8517.04 13933.32

Wt. RETAIL 10 lbs. $ 444.88

Medium Pressure-High Flow Motor Wt. Part No. Pump

GPM

PSI

Lbs.

RETAIL

DU PM390 Cat 12 600 5 175 $ 3546.98 DU PM623 Cat 6 1200 5 260 3276.30 DU PM820 Cat 10 1000 7-1/2 225 4606.92 DU PM1010 Cat 12 700 7-1/2 225 4809.26 DU PM1050-15 Cat 12 1800 15 400 6350.26 DU PM1520 Cat 15 1000 10 280 6825.96 DU PM2520 Cat 25 800 15 400 10037.94 DU PM3535 * Cat 30 1000 20 625 13008.72 High Pressure-Low Flow Motor Wt. Part No.

Pump

DU PM550 DU PM540 DU PM570 DU PM650 DU PM660 DU PM70

GPM

PSI

Lbs.

RETAIL

* Cat 4.5 3000 10 300 $ 3634.08 * Giant 4.5 4000 15 350 4038.76 * Cat 4.5 4000 15 350 6130.50 * Cat 7 3000 15 350 6575.38 * Cat 10 3000 20 350 7453.08 * Cat 4.5 5000 15 350 6858.12

* No Pulsation Dampeners on These Units

IND

DULTMEIER SALES • OMAHA, NE

(800) 228-9666

•

www.dultmeier.com

• DAVENPORT, IA

(800) 553-6975

E0296

Steam Vapor Cleaning Units

233

Portable Vapor Steam Cleaning Units from Vapamore. An effective, chemical-free way to clean, disinfect and deodorize. The power of steam uses only water and heat, no chemicals are needed. Powerful deep cleaning kills mold, mildew, even bed bugs. Anywhere you need to clean, you can safely clean with steam. Performance, durability and lifetime warranty on all models. Commonly used in the following industries: Auto Detailing, Car Dealerships, Carpet Cleaning, Flood and Restoration, Office Cleaning, Animal Care, Janitorial, Restaurants, Exterminators, Car Rental Companies, Commercial Kitchens, Professional Cleaning Services, etc. Ideal for cleaning and disinfecting. Removes dirt, grease, grime and stains. Almost limitless uses include: Vehicle interiors, engine and wheels • Carpets and rugs, stone, tile and vinyl • Windows and mirrors • Walls, furniture and upholstery • Restrooms • Kennels • Food preparations • General office cleaning. Lifetime Warranty.

MR1000 Forza Vapor Steam Cleaner Heavy-Duty, Commercial Grade MR1000 Forza. Heavy-duty, commercial grade Vapor Steam Cleaner. Designed for continuous duty use. (50) Piece accessory attachment set includes floor wand, hand tools and a wide variety of accessories that provide for a complete cleaning system. Dimensions are 19” x 20” x 20”. Weight is 50 lbs.

Features: • Steel construction with powder-coated finish • Adjustable steam output • Computer controlled operation • Heavy-duty wheels & casters • 1700 Watt heating element • Continuous flow, no down time • 90 PSI Steam output pressure • Tip temperature is 285° F. • 25’ Power Cord • Stainless steel boiler • 120 Volt, 60hz • 1.1 Gallon tank capacity • 8’ Steam hose Part No. • ETL certified VP MR1000 • 50 Piece attachment set

MR1000

50 Piece Attachment Kit

Wt. RETAIL

Heavy Duty Vapor Steamer............ 50 lbs.

CALL

MR750 Ottimo Vapor Steam Cleaner Medium-Duty, Commercial Grade MR750 Ottimo. Medium-duty, commercial grade Vapor Steam Cleaner. Designed to fill the gap between the MR1000 Heavy Duty and the Light Duty MR100. Easy to move and store. Working time of up to 3 hours per tank fill. (25) Piece accessory attachment set includes floor and hand wands. Dimensions are 16” x 14” x 14”. Weight is 20 lbs.

MR750

25 Piece Attachment Kit Part No.

Wt. RETAIL

VP MR750

Features: • Stainless boiler • 1500 Watt heating element • Plastic case • Padded carrying handle • 18’ Power cord • Onboard accessories storage • .42 Gallon tank capacity • 51 PSI steam output pressure, • Tip temperature is 215° F. • 120 Volt, 60hz • 6’ Steam hose • ETL certified • 20 Piece attachment set IND

Medium Duty Vapor Steamer......... 20 lbs.

CALL

Features: • Steel construction with powder-coated finish • Adjustable steam output • Solenoid operated steam control • Heavy-duty casters • 1600 Watt heating element • 3 Hour run time per tank fill • 75 PSI Steam output • Tip temperature is 285° F. • 15’ Power Cord • Stainless steel boiler • 120 Volt, 60hz • .73 Gallon tank capacity • 8’ Steam hose • ETL certified • 25 Piece attachment set

MR100 Primo Vapor Steamer Light-Duty, Entry Level MR100 Primo. Entry level, light-duty Vapor Steamer for periodic use. Adjustable steam output and 60 minutes of operation per tank fill. (20) Piece attachment set with floor and hand wands gives you all you need for basic steam cleaning. Dimensions are 14” x 12” x 12”. Weight is 14 lbs. D

20 Piece Attachment Kit Part No.

VP MR100

Wt. RETAIL

Light Duty Steam Vapor Unit.......... 14 lbs.

DULTMEIER SALES • OMAHA, NE

(800) 228-9666

•

www.dultmeier.com

MR100

CALL

• DAVENPORT, IA

(800) 553-6975

E1169

234

Trailer Washout • Disinfectant Systems Trailer Washout Systems

Coil Cleaning/Descaling Pumps Helps Eliminate Calcium Buildup & Lime Scale

Ideal for Applications that Require High Volumes of Clean Wash / Rinse Water Pumping Systems designed for high flow rates at moderate pressures. Ideal for washout and cleaning of livestock trailers, tank trucks, delivery vehicles and any other applications that require high volumes of clean wash/rinse water. Trailer Washout units are rated to 26 GPM and 300 PSI and have the following Features: Single or three phase motors with manual stop/start controls • Stainless steel baseplate and belt guard • Belt tightener • High flow pressure regulator • Pulsation/vibration dampener • Double groove pulleys with cog belts • 100’ of 1” wash hose with ball valve and nozzle • Pre-plumbed and ready for hookup, (motors and starters must be wired to your power source). Systems can be direct fed or water can be supplied from an optional supply tank. (Various hose reels, supply tanks and catch basins are available, but not included).

Designed to introduce descaling chemicals and solutions into hot water pressure washer coils. Helps to eliminate calcium buildup and lime scale deposits. Extends the time required between coil cleanings. 2.5 RPM motor with 30 inch power cord is rated to .037 gallons per hour. Draws from your bulk descaling solution and transfers to the water supply tank on your pressure washer, which in turn feeds to the coil. Available in different voltages to meet your specific needs.

Part No. Voltage RETAIL NP ST15 Coil Cleaning Pump 115 VAC $ 56.01 NP ST15-230 Coil Cleaning Pump 230VAC 56.01 NP ST15-12 Coil Cleaning Pump 12VDC 112.56

Disinfectant System Complete System for Storing and Applying Common Disinfectant Products Standard Features Include: Air-driven diaphragm pump rated up to 3 GPM and up to 75 PSI • 25 Gallon storage tank with automatic mixing valve • 75’ of applicator hose • Trigger spray wand with 24” extension • Air pressure regulator • PrePlumbed and ready for hookup to your air supply.

Optional Capture Mat

Pump Units

D D

Part No.

DU DC1

RETAIL

Disinfectant Applicator System........ $ 968.82

Pumping Units Also Available for Reclaim Water D

Spray Gun Hose

Featuring Hydra-Cell Diaphragm Pumps

Wt.

Part No. DU TWO251 DU TWO253

IND

Motor 7.5 HP / 1 Phase 7.5 HP / 3 Phase

GPM 26 26

PSI 300 300

DULTMEIER SALES • OMAHA, NE

Lbs. 225 210

RETAIL $ 7293.62 6324.80

(800) 228-9666

•

— Call Us for a Quote — www.dultmeier.com

• DAVENPORT, IA

(800) 553-6975

E1139

Pressure Washers

235

Hydraulic Pressure Washers

X Series New X-Series Pumps from Pumptec. Four plunger design provides high flows at medium pressure. Ideal for use as a fill pump and a wash down pump as well as other applications. Rated from 85 to 160 PSI and 3.4 to 6.4 GPM. Aluminum head with Viton® seals and ceramic plungers.

These Hydraulically-Driven Pressure Washers are designed for remote and explosion-proof environments where electricity cannot be used. The ideal choice for use with washdown and cleaning of construction equipment, agricultural equipment, concrete cleanup, etc.

81518

Part No. PX 81518 PX 81526

Volts 12V 110V

Max. Maximum Amp Flow PSI Draw 6.4 160 30-70 5.4 110 7.2

Seals Viton® Viton®

Wt. RETAIL 30 lbs. $ 1242.18 35 lbs. 1369.48

12-Volt Pressure Washer Kits

Wand & Hose are included in some kits

The Industry Standard for 12 Volt DC Powered Pressure Washers Compact 12-Volt Pressure Washer Kits are simple, fast, quiet and reliable. Sealed motors with push/pull switch and circuit breaker. All kits include unloader valve, spray wand, 25’ spray hose (PWK15 only), suction filter and inlet hose, and motor mounts. This system is a simpler, more compact and lower in cost. Can be easily mounted to your equipment frame.

Kits are complete with hydraulic motor, HYPRO plunger pump, mounting rails, unloader valve, pressure gauge and quick disconnect for hose. Some models come with spray wand and 50’ hose as shown. A wide variety of flows and pressures are available to meet your needs. Ports are 1/2” FPT x 3/4” FGHT inlet and 3/8” male quick disconnect. Rated to 160° F. Part No. Cleaning Capacity

PWK15 Only

Hydraulic Motor Requirements

HY 1805C 3.0 GPM @ 1500 PSI 8 GPM @ 1900 PSI HY 1807C 3.0 GPM @ 2000 PSI 11 GPM @ 1300 PSI HY 1827C 4.0 GPM @ 2000 PSI 8 GPM @ 2000 PSI Note: These models do not include hose & wand assembly.

Part No. Cleaning Capacity

Hydraulic Motor Requirements

Wt.

RETAIL

28 lbs. $ 1839.82 28 lbs. 2035.46 33 lbs. 2098.44

Wt.

RETAIL

HY 1804 3.0 GPM @ 1500 PSI 8 GPM @ 1900 PSI 41 lbs. $ 2134.62 HY 1806 3.0 GPM @ 2000 PSI 11 GPM @ 1300 PSI 41 lbs. 2335.62 Note: These models also include spray wand & 50’ hose assembly.

PWK15 Kit

80488

Part No.

PX PWK15 PX 80729 PX 80488

Enclosed Cold Water Pressure Washers

GPM PSI Amp Draw Wt. RETAIL

1.0 200 15 20 lbs. * 1.4 700 60 50 lbs. Trigger Gun As Replacement..........

* No Switch or 25’ of Hose - For Direct Wiring.

$ 720.92 1179.20 114.57

12-Volt Pressure Washer 12-Volt Pressure Washer featuring Cat plunger pump with built-in unloader and chemical injector. Designed to be easily mounted on your equipment frame and powered from your existing battery. Output is 1.50 GPM at 700 PSI. Motor is 12-volt, 1 Hp, 80 full load amps. 25’ Spray hose and trigger wand with 18” extension are standard. 3/8” Brass quick couplers to easily remove hose from pump are also included.

Many industries require enclosed and covered pump systems for industrial cleaning applications. These cold water units are belt-driven and feature electric motors and General plunger pumps in a stationary, enclosed housing. All units include trigger wand, 50’ of hose, high pressure detergent system, float tank, unloader valve and external on-off switch. (Other motor phase is available from those shown).

50 ft. Hose

D D

Wand

Part No.

Output

DU PMV700 1.5 GPM @ 700 PSI

Wt.

55 lbs.

Part No. WD WD311 WD WD418 WD WD518 WD WD430 WD WD530

RETAIL

$ 825.44

Max. Max. Flow PSI Motor Wt. 3.0 GPM 1100 2 HP / 1 PH / 115V 230 lbs. 4.0 GPM 1800 5 HP / 1 PH / 230V 330 lbs. 4.8 GPM 1800 6 HP / 1 PH / 230V 335 lbs. 4.0 GPM 3000 8 HP / 1 PH / 230V 390 lbs. 5.0 GPM 3000 10 HP / 3 PH / 230V 350 lbs.

RETAIL $ 2377.16 2942.64 CALL 3447.82 4371.08

Viton® is a registered trademark of DuPont Performance Elastomers

IND

DULTMEIER SALES • OMAHA, NE

(800) 228-9666

•

www.dultmeier.com

• DAVENPORT, IA

(800) 553-6975

E0908

Plunger Pumps

236

Udor Plunger Pumps are widely used in pressure wash, truck wash, car wash and industrial cleaning applications. Available in a wide variety of pressures and flow rates. Designed for pulley drive, direct electric motor drive, direct engine drive, gear box engine drive and hydraulic motor drive. Standard Features Include: Brass manifolds • Heat treated crankshafts • Stainless steel check valves and piston guides • Industrial quality ball bearing or needle bearings • Solid ceramic plungers • Heavy duty high pressure seals • Rated to 160˚ F. Note: Rails are not included and must be ordered separately if needed. Right hand shafts are standard. Specify if left hand shaft is required.

Direct Drive Electric Motor Models Part No. GPM/Pressure RPM Flange Shaft UD PND3020Z 3.0 @ 2000 PSI 1750 56C 5/8" Hollow UD PNL3020Z 3.0 @ 2000 PSI 3400 56C 5/8” Hollow UD PND4015Z 4.0 @ 1500 PSI 1750 56C 5/8” Hollow UD BD4020U 4.0 @ 2000 PSI 1750 182/184T 1-1/8” Hollow UD BD4030U 4.0 @ 3000 PSI 1750 182/184TC 1-1/8” Hollow

Wt. 13 lbs. 13 lbs. 13 lbs. 23 lbs. 23 lbs.

RETAIL $ 426.12 426.12 434.16 592.28 592.28

Wt. 14 lbs. 23 lbs. 26 lbs. 26 lbs.

RETAIL $ 434.16 530.64 605.68 636.50

Wt. 28 lbs. 30 lbs. 30 lbs. 49 lbs. 46 lbs. 46 lbs. 49 lbs.

RETAIL $ 801.32 868.32 903.16 1295.78 1096.12 1197.96 1405.66

Pulley Drive Models Part No. Flow/Pressure RPM Flange Shaft Wt. UD PNC1315S 3.5 @ 2000 PSI 1450 None 24mm 12 lbs. UD BC1520S 4.0 @ 3000 PSI 1450 None 24mm 20 lbs. UD BKC1528S 4.0 @ 4000 PSI 1450 None 24mm 23 lbs. UD CKC1736S 4.5 @ 5000 PSI 1450 None 24mm 39 lbs. UD BC1820S 4.9 @ 3000 PSI 1450 None 24mm 20 lbs. UD BKC2024S 5.3 @ 3500 PSI 1450 None 24mm 23 lbs. UD CKC2628S 6.9 @ 4000 PSI 1450 None 24mm 39 lbs. UD PENTAB25/400 6.6 @ 5800 PSI 1000 None 35mm 97 lbs. UD CC3020S 7.9 @ 3000 PSI 1450 None 24mm 36 lbs. UD PENTAB30/300 7.9 @ 4350 PSI 1000 None 35mm 97 lbs. UD CD9525S 9.5 @ 2500 PSI 1750 None 24mm 36 lbs. UD PENTAB40/300 10 @ 4350 PSI 1000 None 35mm 97 lbs. UD CKC5015S 13 @ 2500 PSI 1450 None 24mm 39 lbs. UD NX55/200 14.8 @ 3000 PSI 1450 None 35mm 67 lbs. UD PENTAC58/300 15 @ 4350 PSI 1450 None 35mm 97 lbs. UD VX60/350R 16 @ 5100 PSI 1000 None 35mm 128 lbs. UD NX75/150 19.8 @ 2200 PSI 1450 None 35mm 67 lbs. UD VX75/280R 19.8 @ 4000 PSI 1000 None 35mm 128 lbs. UD VX95/280R 25 @ 4000 PSI 1250 None 35mm 128 lbs. UD VX130/160 33 @ 2300 PSI 1000 None 35mm 128 lbs. UD VX160/130 41 @ 2000 PSI 1000 None 35mm 128 lbs. UD 8702.10 Rail Kit, P, B, BK................................................................................... UD 8702.08 Rail Kit, C, CK...................................................................................... UD 8702.30 Rail Kit, PENTA, VX............................................................................. UD 8702.35 Rail Kit, NX Series...............................................................................

RETAIL $ 426.12 553.42 632.48 1398.96 578.88 696.80 1090.76 5918.78 888.42 5922.80 888.42 5918.78 1239.50 4095.04 5918.78 6296.66 4095.04 6296.66 6296.66 6296.66 6296.66 11.59 13.07 105.19 110.55

Direct Drive Gas Part No. UD PNL3025T UD BL4030W UD BKL4040W UD BKL5035W

PND / PNL Series

Engine Models GPM/Pressure RPM Flange 3.0 @ 2500 PSI 3400 Gas 4.1 @ 3000 PSI 3400 Gas 4.0 @ 4000 PSI 3400 Gas 5.0 @ 3500 PSI 3400 Gas

Shaft 3/4" Hollow 1” Hollow 1” Hollow 1” Hollow

Gear Reduction Gas Engine Models Part No. GPM/Pressure RPM Flange Shaft UD BC1520GR 4.0 @ 3000 PSI 3400 Gas 1" Hollow UD BKC1528GR 4.0 @ 4000 PSI 3400 Gas 1” Hollow UD BKC1824GR 5.0 @ 3500 PSI 3400 Gas 1” Hollow UD CKC2628GR 6.9 @ 4000 PSI 4000 Gas 1” Hollow UD CC3020GR 7.0 @ 3000 PSI 3400 Gas 1” Hollow UD CC3815GR 10 @ 2000 PSI 3400 Gas 1” Hollow UD CKC3820GR 10 @ 3000 PSI 3400 Gas 1” Hollow

CKC2628GR

BKC1528S

Hydraulic Drive Pump/Motor Units Part No. Pump Output Hydraulic Requirements UD PND3020ZH 3.0 @ 2000 PSI 5.0 GPM @ 2200 PSI UD BD4030SH 4.0 @ 3000 PSI 12 GPM @ 1500 PSI UD BKD4040SH 4.0 @ 4000 PSI 12 GPM @ 2000 PSI UD CKC2628SH 7.0 @ 4000 PSI 20 GPM @ 2400 PSI UD CKC3820SH 10 @ 3000 PSI 20 GPM @ 2400 PSI

Wt. 24 lbs. 36 lbs. 39 lbs. 75 lbs. 75 lbs.

RETAIL $ 1251.56 1606.66 1731.28 2659.90 2686.70

BKB4040SH

IND

DULTMEIER SALES • OMAHA, NE

(800) 228-9666

•

www.dultmeier.com

• DAVENPORT, IA

(800) 553-6975

E0969

Water Jetters • HydroStatic Test Units

237

Water Jetter/Sewer Units Electric Drive Portable Drain Cleaning Jetters. Electric motor drive. Hand carry or wheeled carts. Uses water supply at medium pressure to create a pulsing flow to dislodge clogged drains and plumbing lines. Easy-to-use and transport.

Jetter Valve

All models include General plunger pumps with jetter valve, 115 volt, 1 phase motors, 30’ GFI power cord, adjustable pressure regulator, hand carry or wheeled cart and inlet supply fittings.

Note: Hoses and nozzles are not included as many options are available, see nozzle and hose sections or call for details. Motors are rated to 18 amp maximum draw but reducing output pressure will allow for less than 15 amp draw if required. Part No.

BI HC2015GJ BI HC3010GJ BI EE2015GJ BI EE3010GJ

GPM

PSI

2.0 3.0 2.0 3.0

1300 1000 1300 1000

Motor

Cart

Wt.

EE2015GJ

RETAIL

2 HP, 1 Phase Hand 90 lbs. $ 1381.54 2 HP, 1 Phase Hand 90 lbs. 1313.20 2 HP, 1 Phase Wheeled 105 lbs. 1358.76 2 HP, 1 Phase Wheeled 105 lbs. 1171.16

HC2015GJ

Water Jetter Sewer Units Gas Drive Self Contained, Drain Clean Jetters with Gas Engine Driven Pumps are designed to create a pulsing flow to dislodge clogged drains or plumbing lines. Standard Features: General Plunger Pump • Jetter Pulse Valve • Honda Engine • Pressure Unloader • Hose Reel • Portable Carts in Aircraft Grade Aluminum • Jumper hose from pump to reel • Units are pre-assembled and tested prior to shipping • All Jetters are rated from 3 - 4 GPM and 2700 - 4000 PSI • Reels will hold up to 150’ feet of 3/8” or 225’ of 1/4” I.D. hose • Dimensions including cart and reel are: 22” wide x 34” long x 45” high • Weights are shown below. (Sewer hose and nozzles are not included as many options exist).

Part No.

JD4040 13 HP Gas Drive

GPM

BI JD3027 3.0 BI JD4040 4.0 BI JD4040HGE * 4.0 * 12 Volt Starter.

Jetter Valve

PSI

Motor

Pump

Wt.

2700 6.5 HP Honda General 170 lbs. 4000 13 HP Honda General 225 lbs. 4000 13 HP Honda General 225 lbs.

RETAIL

$ 1756.74 2332.94 2960.06

Hydrostatic Test Units Designed to test the integrity of pipes and plumbing system required by local codes. Ideal for use with sprinkler systems or sewer lines. All units feature hand carry carts except

PM20HS 3/4 HP Electric

1050U which is on a aircraft aluminum frame with pneumatic wheels. Gas engine or electric drive as shown.

D D

1050HU 5 HP Gas 80409 3/4 HP Electric

Part No.

PX 80409 DU PM20HS DU PM35HS BI 1050HU

IND

DULTMEIER SALES • OMAHA, NE

(800) 228-9666

•

GPM

PSI

Motor

Pump

Wt.

3.0 250 120V, 1/2 HP Motor PumpTec 38 lbs. 2.1 500 120V, 3/4 HP Motor General 65 lbs. 2.8 1000 120V, 2 HP Motor General 80 lbs. 10 500 5 HP Honda Engine Udor 165 lbs.

www.dultmeier.com

• DAVENPORT, IA

(800) 553-6975

RETAIL

$ 1140.34 1298.46 1612.02 2456.22

E0789

Roll Cage Jetter Units

238

Portable Roll Cage Jetters Heavy Duty Jetter Units from Simpson are ideal for jetting of sewer and plumbing lines. Roll cage frames with powder coated finish are designed to accept one or two hose reels, if needed. (4) High quality pneumatic tires give increased stability and shock absorption. Pump jetter features allows for pumps to “pulsate” flows through pipes which helps to break up blockages.

SPJ1502ERC Electric Motor & SPJ4240HRC Gas Engine

Roll Cage Jetter Models include the following features: Honda, Kohler or Vanguard gas engines with low level oil shut-off or electric drive as noted • Tubular steel frame with powder coat finish • Gear box, belt or direct drive as noted • Industrial Series Comet plunger pumps • On-off pulsation valve • (4) 4-ply pneumatic tires • Pump unloader relief valve • Mounting plates for 1 to 2 optional hose reels • Startup engine oil • 3/8” Jetting nozzle kit • 1/4” High pressure nozzle kit. (Note: Jetter hose reels and jetter hoses are optional to meet specific needs). Made in USA. Optional high quality hose reels are designed to mount directly to 4 wheel carts. Designed for 1/4” or 3/8” high pressure hoses. Includes hose guide for ease of handling.

SPJ3050HRC Gas Engine

Part No. Output Drive Type RETAIL FN SPJ1502ERC 1.8 GPM @ 1500 PSI * Electric Drive, Direct.................. $ 2555.38 FN SPJ4240HRC 4.0 GPM @ 4200 PSI * Honda Gas, Direct .................... 2673.30 FN SPJ3050HRC 5.0 GPM @ 3000 PSI Honda Gas, Gear Box................. 3364.74 FN SPJ4070HRC 7.0 GPM @ 3500 PSI Honda Gas, Gear Box................. 6263.16 FN SPJ4060HRC 6.0 GPM @ 4000 PSI Honda Gas, Gear Box................. 6188.12 FN SPJ3575HRC 7.5 GPM @ 3500 PSI Kohler Gas, Gear Box.................. 6087.62 FN SPJ4065HRC 6.5 GPM @ 4000 PSI Vanguard Gas, Gear Box............ 6054.12 FN 80225 Frame Mount Hose Reel, 3/8” x 100’ Capacity, No Hose......... 160.47 FN 80226 Frame Mount Hose Reel, 3/8” x 200’ Capacity, No Hose......... 176.55 * Only designed for one optional hose reel, all other models can accept 1 or 2.

80225 / 80226

Jetter/Pressure Wash Combo Unit Combination Jetter/Pressure Wash Unit from Simpson is ideal for use as a portable jetter for sewer and plumbing cleanout as well as for use as a pressure washers for routine high pressure cleaning. Available with 2 wheel cart. Power Shot Combo Model is standard with the following features: Honda GX gas engine with low level oil shut-off • Tubular steel frame with powder coat finish • Direct drive industrial series Comet plunger pump • Pressure bypass valve • Pulsation valve, on for jetting, off for high pressure • (2) 4-ply pneumatic tires • 31” Trigger spray wand • 3/8” x 50’ high pressure cleaning hose • Engine oil • 3/8” Jetting nozzle kit • 1/4” High pressure nozzle kit • Made in USA. (Note: Jetter hoses and reels are optional to meet specific needs). D

Part No. FN SPJ4240H

Max. Maximum Flow Pressure Frame Drive RETAIL 4.0 GPM 4200 PSI 2-Wheel Gas Direct $ 2323.56

SPJ4240H

Service and Production Department

Service Dept

IND

DULTMEIER SALES • OMAHA, NE

(800) 228-9666

•

www.dultmeier.com

• DAVENPORT, IA

(800) 553-6975

E1221

Thawing Systems • Torches Valve Heaters

TORCHES

Valve Heaters for Lever and Piston Valves on septic trucks or tanks. Once you try these you will wonder how you got by without them. No piping or welding changes are required to your truck. Connects to your radiator system and circulates hot water through the heater collar that surrounds the valve body. Designed for MZ and Betts valves only as noted. Part No.

239

Size Valve Type

RETAIL

CB VH3 3" MZ Lever CB VH4 4” MZ Lever CB VH6 4” MZ Lever CB VH6P1 * 4” MZ Piston CB VH6P2 ** 4” MZ Piston CB VH4B 4” Betts Piston CB VH6B 6” Betts Piston

Ideal for Construction, Farm and Ranch, Home and Garden. Simple, lightweight and effective. Can be used to flame or burn weeds, thaw frozen pipes, melt snow and ice, heat roofing pots and kettles, sterilize animal cages or pens and many other uses. All units develop temperatures to 2000° F. CSA certified for USA and Canada.

$ 206.36 206.36 257.28 257.28 257.28 229.14 269.34

All “kits” include torch, 5’ or 10’ hose, POL tank fitting, needle or squeeze valve for flame control, spark lighter and thread sealant. Some kits include gas regulators as needed. Shown with and without “flame squeeze valve”.These valves are ideal when full flame is not continuously needed. Allows for easy adjustment of flame output.

* 6P1 is for MZ Piston Valves with 2-3/8” Wide Bodies. ** 6P2 is for MZ Piston Valves with 3-1/2” Wide Bodies.

Pipe Thawing System D

The perfect machine for thawing sewer or plumbing lines, septic tanks, engine blocks, culverts, stock tank valves and many more. For above or below ground pipes. Can be used on plastic, copper, ABC, PVC or steel. Can even be used for removing decals and adhesives. No electricity is required.

VT223 Torch Kits are rated to 100,000 BTU’s. A great torch for home and garden where the bigger farm/construction torch is not needed. Available with or without flame squeeze valve. Overall length is 27-1/2”. 10’ LP hose and regulator are included. VT330 Torch Kits are rated to 500,000 BTU’s. The most versatile and popular torch kit. Available with or without squeeze valve. Overall length is 33-1/2”. 10’ LP hose is included, no regulator is required.

HT10CR Torch Kit is rated to 50,000 BTU’s. Great for small jobs and detail work. Available in complete kit with needle flame valve, 10’ hose, regulator and lighter. Overall length is 15”.

Produces a dry steam that quickly and efficiently thaws frozen lines. Tank holds 2 gallons of water which is heated by your LP torch (torches are available but are not included). Portable and easily moved as needed. 50’ x 1/4” hose for water lines and 50’ x 3/8” hose for sewer lines are included. Develops up to 230° F. output temperature. 2 Gallon water tank will produce about 15 minutes of operation which will thaw most frozen lines. CB AB1000

Wt.

VT330C

LP Needle Valve

RETAIL

VT223C

Designed for effective thawing of frozen water service lines. Pulses warm water into the blocked line to thaw and remove the blockage. Completely selfcontained, one person operation. Compact design allows for easy moving, even up or down stairs. Flow-Pulse control allows for high pressure pulsing for feeding tubing down the line or high flow operation for maximum thawing. Heat probe tip is self-feeding and self-centering in the line. Stainless steel water tank with immersion heater is designed to recirculate and reheat water being used.

IND

HT10 Only

HT10CR Kit

Features: High pressure plunger pump • TEFC Motor rated for 115 volt • Rated at 15 amps • Pneumatic wheels for movement on any surface • Heater to maintain water at 70° F. • Draws 8 amps • Hose reels with 100’ & 200’ of probe hose • 9 Gallon stainless water tank • Compact size: 41” H x 19” W x 28” L. SG PJDXC200

Arctic Blaster Thaw Unit............... 75 lbs. $ 1326.60

De-Icer Line Thawer

Part No.

BP2512SVC

BP2512 Backpack Torch Kits are rated to 400,000 BTU’s. Includes torch, 5’ hose, backpack frame, 10 lb. cylinder, spark lighter and needle or squeeze flame valve.

HT10 is torch only with needle valve.

Part No.

Squeeze Valve

Part No. BTU Rating Flame Valve Wt. FE VT223C 100,000 Needle 4.5 lbs. FE VT223SVC 100,000 Squeeze 4.5 lbs. FE VT330C 500,000 Needle 5.0 lbs. FE VT330SVC 500,000 Squeeze 5.0 lbs. FE BP2512C 400,000 Needle 27 lbs. FE BP2512SCV 400,000 Squeeze 27 lbs. FE HT10CR 50,000 Needle 4.0 lbs. FE HT10 * 50,000 Needle 1.0 lbs. * Torch Only with Needle Valve. Note: Quantity Discounts are Available - Call for Details.

Rated to 300 PSI

Wt.

De-Ice Line Thaw Unit............... 140 lbs. DULTMEIER SALES • OMAHA, NE

RETAIL

$ 3703.76

(800) 228-9666

•

www.dultmeier.com

• DAVENPORT, IA

(800) 553-6975

RETAIL $ 87.77 134.00 117.92 163.15 234.50 375.20 113.90 76.38

E0930

Reverse Osmosis & Water Filter Components

240

Filmtec Membranes

High Flow RO Membranes

Dow/Filmtec, Thin Film Composite Membranes are common replacements for a wide variety of Reverse Osmosis Systems. Spiral wound, thin film composite membranes offer better rejection of dissolved solids, can operate at lower pressures and produce more water faster than other types of membrane construction. Rejection rates of 99% are standard.

High Flow, Low Energy Reverse Osmosis Membranes for spot free rinse systems and RO production units. Highest production rate on the market at only 150 PSI input pressure. 98.5% Salt rejection. Rated up to 600 PSI and 113° F. 3,000 Gallon per day production at 150 PSI and 77° F. operating temperature. Most common 4” x 40” size.

Available in Tap Water (Treated water supply), Chlorine filters should be used prior to the membrane for increased life. Contact us for options. Extra Low (XLE) and Low Energy (LE) membranes can operate at lower input pressures than standard membranes. Membrane performance is greatly affected by water temperature. Flow rates shown are based on 77° F. input water temperature. Example: (50° F. input temperature can reduce flow rates as much as 40%). Higher input temperatures will increase flow. Production rates are based on a 24 hour day.

Highest Production Rate On the Market

All membranes are rated to 113° F. Rated to 600 PSI. Sizes are either 2-1/2” or 4” O.D. x length.

at Only 150 PSI

Part No.

Size

* Flow Range

** RETAIL

ES PA3-4040 4” X 40” 3000 GPD @ 150 PSI * 24 Hour production cycle at 77° F. tap water. **5% Discount on 4 or More

Part No.

Type

Size

EP ETT06 Tap Water EP ETT07 Tap Water EP ETT08 Tap Water EP ETT10 Tap Water EP ETT11 Tap Water EP XLE2540 * Tap Water EP XLE4021 * Tap Water EP XLE4040 * Tap Water

* Flow Rate

2-1/2” x 14” 2-1/2" x 21" 2-1/2" x 40" 4" x 21" 4" x 40" 2-1/2” x 40” 4” x 21” 4” x 40”

Membrane Housings

RETAIL

200 GPD @ 225 PSI $ 249.24 325 GPD @ 225 PSI 226.46 850 GPD @ 225 PSI 245.22 900 GPD @ 225 PSI 391.28 2400 GPD @ 225 PSI 376.54 850 GPD @ 100 PSI 282.74 1025 GPD @ 100 PSI 403.34 2600 GPD @ 100 PSI 414.06

Replacement Housings for Membranes in RO Spot Free Rinse Systems are available in Fiberglass or Stainless Steel construction. Standard sizes are for 2-1/2" or 4" diameter membranes. All housings come complete with end plugs and o-rings. rated to 200 PSI, fiberglass are Rated to 300 PSI.

* Low Energy Membranes.

Thin Film RO Membranes Thin Film RO Membranes offer the industry’s leading patented membrane technology. Our buying power allows us to offer these high quality membranes at reduced pricing to you. Exact replacements for Film-Tec, Osmonics and many others in the market. Individually tested before shipping.Temperatures to 110° F. Pressures to 225 PSI. 99.7% salt rejection. (For tap water applications).

D D

FIBERGLASS STAINLESS For Membrane Part No. Material O.D. Length

EP HEG02 Fiberglass 2-1/2” EP HEG03 Fiberglass 2-1/2” EP HEG05 Fiberglass 4” EP HEG06 Fiberglass 4” EP HES02 Stainless 2-1/2" EP HES03 Stainless 2-1/2" EP SS421 Stainless 4" EP SS440 Stainless 4"

Part No.

Size

* Flow Range

RETAIL

EP HR2540 2-1/2” X 40” 650 GPD @ 225 PSI EP HR4021 4” x 21” 900 GPD @ 225 PSI EP HR4040 4” x 40” 2200 GPD @ 225 PSI * 24 Hour production cycle at 77° F. tap water.

DULTMEIER SALES • OMAHA, NE

$ 215.74 229.14 314.90

(800) 228-9666

$ 330.98

•

www.dultmeier.com

• DAVENPORT, IA

RETAIL

21” $ 121.27 40” 149.75 21” 163.15 40” 143.05 21" 114.57 40" 136.35 21" 107.87 40" 131.99

(800) 553-6975

E0761

Submersible Well Pumps Submersible Well Pumps

241

Submersible Well Pumps

4” TWI Series

6” TWU Series

The 4” TWI Series of well pump is suitable for applications such as potable water supply, irrigation, municipal, pressure boosting, agriculture, and various industrial processes. All pump ends and motors are certified to meet NSF/ANSI 61 standards. Discharge Port is 1-1/4” FPT and standard elastomer is Buna-N. Features & Benefits: High Quality Shaft Bearings • Motors Up to 250 HP • Control Panels and VFD’s Available • Check Valve is Standard on All Models • 304 Stainless Steel Construction • Carbon/Graphite/ PTFE Stop Ring & Buna Bearing • Maximum Immersion Depth: 1000’ • Maximum Sand Content: 50 ppm • Power: 1 Phase – 115/230V & 3 Phase – 230V/460V •Vertical & Horizontal Installation • Maximum Flow: 110 GPM • Maximum Head: 2,200 Ft. • 3 Year manufacturer warranty.

The TWU Series Submersible Well Pump can be used in a variety of applications such as potable water supply, irrigation, municipal, pressure boosting, agriculture, and various industrial processes. Motors are certified to meet NSF/ANSI 61 standards. Noryl impellers are standard for maximum wear and abrasive resistance. Discharge port is 3” FPT and Buna-N elastomers are standard. Features & Benefits: Abrasive Resistant Noryl Impellers & Shaft Sleeve • Buna Oring • High Quality Shaft Bearings for Long Life & Easy Installation • Check Valve Standard on All Models • Optional VFD’s & Control Boxes Available • 304 Stainless Steel Body • Vertical & Horizontal Installation Possible • Maximum Sand Content: 50 ppm • Maximum Immersion Depth: 1000ft • Maximum Flow: 317 GPM • Maximum Head: 1,410 Ft • Available in 3 Phase / 230V or 460V • 2 Year manufacturer warranty.

For Water to convert Head to PSI - take Ft/2.31

For Water to convert Head to PSI - Take Ft/2.31

D D

Part No. WO 2711950 WO 2711949 WO 2707415 WO 2707428 WO 2707429

Description TWI 4”, 31 Stage TWI 4”, 31 Stage TWI 4”, 34 Stage TWI 4”, 15 Stage TWI 4”, 15 Stage

Flow Rate Power Wires Wt. RETAIL 7 GPM@400’ 1.5HP, 3PH, 230V 3 43 lbs. $ 1629.44 7 GPM@400’ 1.5HP, 1PH, 230V 3 47 lbs. 1668.30 14 GPM@400’ 3HP, 3PH, 230V 3 54 lbs. 1821.06 25 GPM@375’ 3HP, 1PH, 230V 3 49 lbs. 1535.64 25 GPM@375’ 3HP, 3PH, 230V 3 41 lbs. 1361.44

*Not All Models are Listed. If you don’t see a suitable option for your requirements call us at 1-800-228-9666 to help size a pump.

* Pump & Motor are sold and shipped separately to lessen freight costs Assorted Quantity Discounts: 10% Off 4 Any Size - 18% Off 8+ Any Size

Call with System Requirements for Pricing!

Assorted Quantity Discounts: 10% Off 4 Any Size - 18% Off 8+ Any Size

Submersible Well Pumps

4” TWU Series

6” - 10” SPI Series

The TWU Series submersible well pump can be used in a variety of applications such as potable water supply, irrigation, municipal, pressure boosting, agriculture, and various industrial processes. Motors are certified to meet NSF/ANSI 61 standards. Noryl impellers are standard for maximum wear and abrasive resistance. Discharge port is 1-1/4”FPT and Buna-N elastomers are standard.

The SPI Series is the most popular line of Wilo Submersible Well Pumps. These pumps are most commonly used in applications including, but not limited to, potable water supply, irrigation, municipalities, pressure boosting, agriculture, and industrial processes. Available in sizes of 6”, 7”, 8”, and 10”. Discharge port is 3” FPT on all sizes. Buna-N elastomers are standard.

Features & Benefits: Abrasive Resistant Noryl Impellers & Shaft Sleeve • Buna Oring • High Quality Shaft Bearings for Long Life & Easy Installation • Check Valve Standard on All Models • Optional VFD’s & Control Boxes Available • 304 Stainless Steel Body • Vertical & Horizontal Installation Possible • Maximum Sand Content: 50 ppm • Maximum Immersion Depth: 1000ft • Maximum Flow: 115 GPM • Maximum Head: 1,150 Ft • Available in 1 Phase or 3 Phase / 115V, 230V or 460V • 3 Year

Features & Benefits: Vertical & Horizontal Installation

Possible • Motors up to 250HP • Control Boxes and VFD’s Available • NEMA Standard Mounting Specifications • High Quality Shaft Bearings • Check Valve Standard – All Models • 304 Stainless Steel Construction • Buna-N Oring & Bearing • 2 Year manufacturer warranty.

manufacturer warranty.

For Water to convert Head to PSI Take Ft/2.31

Assorted Quantity Discounts: 10% Off 4 of Any Size - 18% Off 8+ of Any Size Part No. WO 2707223 WO 2707243 WO 2707266 WO 2707275 WO 2707274 WO 2707328 WO 2707327 WO 2707314

Description Flow Rate TWU 4”, 17 Stage 9 GPM@310’ TWU 4”, 12 Stage 10 GPM@310’ TWU 4”, 18 Stage 15 GPM@205’ TWU 4”, 14 Stage 20 GPM@205’ TWU 4”, 14 Stage 20 GPM@205’ TWU 4”, 9 Stage 38 GPM@200’ TWU 4”, 9 Stage 38 GPM@200’ TWU 4”, 24 Stage 25 GPM@500’

Power

Wires Wt. RETAIL 2 34 lbs. $ 1033.14 2 34 lbs. 899.14 2 33 lbs. 880.38 3 38 lbs. 1057.26 3 42 lbs. 1122.92 3 47 lbs. 1514.20 3 55 lbs. 1688.40 3 89 lbs. 2308.82

1HP, 1PH, 230V 1HP, 1PH, 230V 1HP, 1PH, 230V 2HP, 3PH, 230V 2HP, 1PH, 230V 3HP, 3PH, 230V 3HP, 1PH, 230V 5HP, 1PH, 230V

*Not All Models are Listed. If you don’t see a suitable option for your requirements call us at 1-800-228-9666 to help size a pump.

IND

DULTMEIER SALES • OMAHA, NE

(800) 228-9666

•

* Pump & Motor are sold and shipped separately to lessen freight costs Assorted Quantity Discounts: 10% Off 4 Any Size - 18% Off 8+ Any Size

Call with System Requirements for Pricing! www.dultmeier.com

• DAVENPORT, IA

(800) 553-6975

E1254

Reverse Osmosis & Water Filter Components

242

Multi-Purpose Filter Housings

Chlorine Carbon Filters Carbon Filters are designed for removing Chlorine from water supplies prior to Reverse Osmosis systems. Chlorine can damage RO membranes and shorten life. All units are standard with Fleck controls. Connection is 3/4” on L0005, L0006 and L0007. Connection is 1” on L0008 and L0009. Backwash feature is time clock activated. D

Chlorine Carbon Bottle with Auto Back Wash

Service Part No. Cu. Ft. Size Flow Rate Wt. EP L0005FL 3/4 8” x 44” 1.75 GPM 65 lbs. EP L0006FL 1 9” x 48” 2.2 GPM 75 lbs. EP L0007FL 2 12” x 52” 3.95 GPM 120 lbs. EP L0008 3 14” x 65” 5.35 GPM 180 lbs. EP L0009 4 16” x 65” 7 GPM 230 lbs.

RETAIL $ 581.56 617.74 766.48 1077.36 1270.32

Rugged, corrosion-resistant plastic filter housings for long, trouble-free life. Used with sediment or carbon cartridges (shown separately) in water systems or as a pre-filter in Reverse Osmosis Systems to protect RO Membranes. Blue upper housing and white opaque lower bowl. Standard with 3/4" FPT ports. Rated to 125 PSI and 115° F. Standard with pressure vent to allow for easy depressurizing and quick air venting.

Sediment Cartridge Filters

Polypropylene String Wound or Spun Filter Cartridges. For replacement in all commercial single or multi-cartridge housings. Design provides clean, fresh water to RO Membranes or faucets. Filters impurities from 1 to 50 microns. Lengths shown will fit 10" or 20" filter housings. Rated service flows from 5-8 GPM. Diameter on these filters is 2-1/2" O.D. (Fits WF housings on adjacent page.) * Std Part No. Style Lgth Pkg RETAIL EP LP014 1 Micron Cartridge String 20" 25 $ 8.24 EP LP013 5 Micron Cartridge String 10" 50 4.18 EP LP015 5 Micron Cartridge String 20" 25 8.24 EP LP017 20 Micron Cartridge String 10" 50 4.11 EP LP019 20 Micron Cartridge String 20" 25 8.24 EP LP024 1 Micron Cartridge Spun 10" 50 1.77 EP LP025 1 Micron Cartridge Spun 20" 25 2.83 EP LP026 5 Micron Cartridge Spun 10" 50 1.77 EP LP027 5 Micron Cartridge Spun 20" 25 2.83 EP LP023 50 Micron Cartridge Spun 20" 25 2.89 *Std Pkg Orders Receive an Additional 10% Discount

WR32 Filter Wrench For Cartridge Size

RETAIL

EP WF1124 12" 5" 9-3/4" x 2-1/2" EP WF2124 22" 5" 20" x 2-1/2" EP WR32 Filter Wrench........................................ EP G101-01 Gasket as Replacement ......................

Part No.

Length

Width

$ 22.58 34.97 4.65 1.21

dultmeier.com D

Spun Style

String Wound

Carbon Cartridge Filters Low Flow Carbon Filters for removing chlorine from water supplies prior to RO systems. Protects and extends membrane life. Size is 2-1/2” O.D. x 10” or 20” length. Fits common blue or white filter housings. Rated to 1 GPM, 5 micron. Temperatures from 50° to 125° F. NSF rated. D

CFC01 Filter

* Std Part No. Size Pkg RETAIL EP CFC01 10” x 2-1/2” 20 $ 5.59 EP CFC05 20” x 2-1/2” 12 10.52

• Shop and Order On-Line 24 Hours a Day, 7 Days a Week!

*10% Discount if Ordered in Standard Packages

• Large Inventories of Over 2.2 Million Total Items! • View Current Pricing!

Call Us For All Your R.O. Needs! OMAHA, NEBRASKA

DAVENPORT, IOWA

1-800-228-9666

1-800-553-6975

FAX: 1-402-333-5546

FAX: 1-563-386-5448

dultmeier.com

IND

DULTMEIER SALES • OMAHA, NE

• Secure Site for Safe On-Line Ordering.

(800) 228-9666

•

www.dultmeier.com

• DAVENPORT, IA

(800) 553-6975

E1027

Liquid Plant Equipment

243

Thompson Filters

Manifolds

304 Stainless Steel Construction throughout Capacities to 1300 GPM Pressures to 100 PSI

These unique Filter Systems feature a conical screen element that gives the filter a self-cleansing ability and the advantage of large screen area providing high capacities with low pressure loss. Debris is collected in a chamber below the screen for periodic flushing through a fitting in the bottom of the filter. Note: Side Flush Models are available as a Special Order. Filters include two 1/4" gauge ports.

Built to Your Specifications D

CALL US FOR CURRENT PRICING !

Strainer Includes Screen – Select from these Sizes Screen Mesh : Wire Diameter

Open Area

1/4" Perforated 20 Gauge Sheet 1/8" Perforated 20 Gauge Sheet 16 Mesh Screen .023" 30 Mesh Screen .013" 40 Mesh Screen .010" 50 Mesh Screen .009" 60 Mesh Screen .0075 80 Mesh Screen .0055 100 Mesh Screen .0045

58.00% 40.30% 39.90% 37.10% 36.00% 30.30% 30.50% 31.40% 30.30%

Chemical Injection Units 4", 6" & 8” Models D

DU 1C010 Customized Multipoint Chemical Injection Units can be provided in 3" or 4" with threaded or flanged connections in steel or 304 stainless. The 1-1/2" feeder nipples are set at 45 to provide prompt mixing action with the carrier fluid. Specify details as required.

Note: 2" and 3" Filters use a quick remove V-Band type clamp to secure the top Cover. 4" & 6" models have bolt on covers. 2" & 3" Sizes have NPT threaded inlet/ outlet ports. 4", 6" & 8” Sizes have flanged connections.

CALL US FOR CURRENT PRICING !

Available with Flanged or Hose Barb Connection 4" Models

Inlet/Outlet Maximum Filter Area Debris Style * GPM Sq. In. Flush Port Wt. 2" MPT 100 122" 1/2" NPT 12 lbs. $ 3" MPT 200 200" 1" NPT 26 lbs. 4" Flanged 350 367" 2" NPT 60 lbs. 6" Flanged 750 745" 2" NPT 110 lbs. 8" Flanged 1300 1559" 2" NPT 205 lbs.

RETAIL 1189.92 2202.96 3400.92 4807.92 8148.54

* Filters priced above have screens installed. Please specify required mesh size.

Part No. DU 2S DU 3S DU 4S DU 6S

Eductors

2" & 3" Models Part No. DU MLI2 DU MLI3 DU MLI4B DU MLI6 DU MLI8

Manifold Units are available in any configuration. Most use 6 x 6 square tubing with support feet. All units are primed and painted. Fitted with 150 lb. Carbon Steel Weld Neck Flanges in 3", 4" or 6".

Screen Size * 2" * 3" * 4" * 6"

RETAIL $ 324.28 511.88 802.66 1159.10

* Specify Screen Mesh Size.

16 through 100 Mesh

Replacement Screens Include Bottom Gasket & Disc Gasket

Eductors are available with a 4" flanged top inlet for mounting with a 4" butterfly valve directly to the hopper tank. Hose barb or flanged each end in 3" or 4". Ideal for adding dry products or liquids to mixes. Stainless hoppers are available in round or square style in a variety of sizes with 4" flanged outlet (CS flange standard, stainless steel available. Valves not included).

Replacement Gaskets & Lids for Thompson Filters

All Gaskets Noted are EPDM; Other Materials Available

PT 16476

Bolted Lid Models:

Size 4” 6” 8”

EPDM Head Gasket DU 4-HG DU 6-HG DU 8-HG

EPDM EPDM Bot. Screen Gasket Disc Gasket DU 4-FG DU 4-DG DU 6-FG DU 6-DG DU 8-FG DU 8-DG

Top Head DU 4-BL DU 6-BL DU 8-BL

Fasteners DU 4-FAST DU 6-FAST DU 8-FAST

Top Head DU 2-CL DU 3-CL DU 4-CL

Lid Clamp DU 2-CLAMP DU 3-CLAMP DU 4-CLAMP

V-Band Clamp Lid Models:

Size 2” 3” 4”

EPDM Head O-Ring DU 2-ORING DU 3-ORING DU 4-ORING

EPDM EPDM Bot. Screen Gasket Disc Gasket DU 2-FG DU 2-DG DU 3-FG DU 3-DG DU 4-FG DU 4-DG

DULTMEIER SALES • OMAHA, NE

(800) 228-9666

•

Part-No. DU EDU3 3" Eductor - Hose Barb.......................... DU EDU4 4" Eductor - Hose Barb.......................... DU EDU3-FL 3" Eductor with Flanged Connection...... CALL DU EDU4-FL 4" Eductor with Flanged Connection...... FOR PT 16478 20 Gallon Square Stainless Hopper....... PRICING PT 16475 25 Gallon Square Stainless Hopper....... PT 16476 42 Gallon Square Stainless Hopper....... PT 16477 70 Gallon Square Stainless Hopper.......

www.dultmeier.com

• DAVENPORT, IA

(800) 553-6975

E0306

Metering & Weighing Systems

244

Rough Deck System

Summit System This 78772 Floor and Scale Indicator Package features Rice Lake’s Summit Scale and 120 Indicator. This package is a great choice for basic setups such as weighing in and out chemical shuttles. The 120 Indicator features LED display, Primary/Secondary Units configuration (lbs., kg., ounces, grams, etc.), programmable ticket format, tilt stand, time and date. The summit scale features a 5,000 lb. capacity and rugged diamond safety tread plate steel deck.

The 87153 Floor Scale and Indicator Package features Rice Lake’s RoughDeck Scale and 420 Plus Indicator. The 420 Plus Indicator features LED Display, primary/secondary units configuration (lb., kg, ounces, grams, etc.), programmable ticket formats, time and date, two digit inputs and outputs. The RoughDeck is built on a structural steel channel frame. It’s heavy duty industrial design is for tough environments where a more rugged scale is required (Stainless Steel is also available). RoughDeck HP-H also available for weights up to 30,000 lbs.

168140

78772

D D

81076 Tape Printer

8617 Scale Bumper Guard

Part No. RL 168140 RL 86817 RL 18777 RL 81076 RL 23113 RL 19352 RL 15547

81076 Tape Printer

Description Wt. RETAIL 4’ x 4” x 5,000 Lb. Deck Scale (NTEP Certified for 1.0 lb. Breaks). Includes 20’ Scale Cable & 480 Plus Indicator......................................... 405 lb. $ 2929.24 4’ Scale Bumper Guard....................................................... 269.34 Set of (2) Anchor Plates for Scale & Bumper Guards......... 40.47 Epson TM-U220 Tape Printer.............................................. 566.82 Epson TM-U295 Ticket Printer............................................ 830.80 Stand for Scale Indicator..................................................... 277.38 Blunt End, 25 Pin D Sub Male RS-232............................... 87.77

Part No. RL 78772 RL 86817 RL 18777 RL 81076 RL 23113 RL 19352 RL 74717 RL 74718 RL 41279

Description Wt. RETAIL 4’ x 4” x 5,000 Lb. Deck Scale (NTEP Certified for 1.0 lb. Breaks). Includes 20’ Scale Cable & 120 Plus Indicator......................................... 315 lb. $ 2121.22 4’ Scale Bumper Guard...................................................... 269.34 Set of (2) Anchor Plates for Scale & Bumper Guards........ 40.47 Epson TM-U220 Tape Printer............................................. 566.82 Epson TM-U295 Ticket Printer........................................... 830.80 Stand for Scale Indicator.................................................... 277.38 Scale, Painted Steel, 4” x 4”, 5,000 lbs............................... 1831.78 Scale, Painted Steel, 4” x 4”, 10,000 lbs............................. 1831.78 25 PIN D-Sub Male to 9 PIN D-SBU Male......................... 87.77

Fertilizer & Chemical Metering & Weighing Systems Available

Call for System Pricing! DULTMEIER SALES • OMAHA, NE

(800) 228-9666

•

www.dultmeier.com

• DAVENPORT, IA

(800) 553-6975

E1232

Meters Piston Meters

700 Series TCS Meters

Series 682AF - 1-1/2" Cast Iron

700SP Series TSC meters are for use with petroleum products, gasoline, diesel (including B2 - B100 Biodiesel), fuel oil and lubricating oils. NTEP approved for resale on these products • Temperatures from -20° F. to 160˚ F. • 0.05% accuracy with viscosities to 1000SSU • Aluminum bodies and Viton® seals (Teflon available) • Veeder-Root D register in gallons and 1/10ths •  Pulsar available •  1-1/2 to 4” sizes •  6-450GPM •  150 PSI.Specify“SPA” for jet-fuel, avgas, and E15-E85 ethanol. Use “SPD” for methanol. Available in all configurations: Ticket printer, 304SS Models are available air eliminator & strainer, preset valve. for “DEF”.

The 682AF 1-1/2" Piston Meter is designed for chemical, agricultural, petroleum and food processing applications. Compatible with B2 - B100 Biodiesel 68215-AFL2 Shown

E10 - E100 Ethanol & M10 - M85 Methanol

Meter & Register Part No. Size GPM Wt. RETAIL TM 70015SP2 1-1/2" 5-60 46 lbs. $ 4352.32 TM 70020SP2 2" 10-100 37 lbs. 4231.72 TM 70020SS2ATD 2” 10-100 * 110 lbs. 6718.76 TM 70030SP2 3" 20-200 75 lbs. 6054.12 TM 70040SP2 4" 40-450 130 lbs. 8657.74 Meter, Register & Printer TM 70015SP3 1-1/2" 5-60 46 lbs. $ 5506.06 TM 70020SP3 2" 10-100 49 lbs. 5780.76 TM 70030SP3 3" 20-200 72 lbs. 8013.20 TM 70040SP3 4" 40-450 129 lbs. 10197.40 Meter, Register & Air Eliminator/Strainer TM 70015SP4 1-1/2" 5-60 50 lbs. $ 5480.60 TM 70020SP4 2" 10-100 49 lbs. 5331.86 TM 70030SP4 3" 20-200 105 lbs. 7357.94 TM 70040SP4 4" 40-450 180 lbs. 10422.52 Meter, Register, Printer & Air Eliminator/Strainer TM 70015SP6 1-1/2" 5-60 65 lbs. $ 6604.86 TM 70020SP6 2" 10-100 65 lbs. 6876.88 TM 70030SP6 3" 20-200 120 lbs. 8834.62 Meter, Register, Printer, Preset & Valve TM 70015SP9 1-1/2" 5-60 64 lbs. $ 8033.30 TM 70020SP9 2" 10-100 67 lbs. 8312.02 TM 70030SP9 3" 20-200 93 lbs. 11329.70 Meter, Register, Preset, Valve & Air Eliminator/Strainer TM 70015SP10 1-1/2" 5-60 68 lbs. $ 7580.38 TM 70020SP10 2" 10-100 68 lbs. 7919.40 TM 70030SP10 3" 20-200 101 lbs. 11119.32 Meter, Register, Printer, Preset, Valve & Air Eliminator/Strainer TM 70015SP11 1-1/2" 5-60 80 lbs. $ 9130.76 TM 70020SP11 2" 10-100 83 lbs. 9404.12 TM 70030SP11 3" 20-200 113 lbs. 13284.76

700740-20AF Air Eliminator/ Strainer

This meter will operate to 50 GPM, 150 PSI and -20° to 400° F. It carries an NTEP certification for resale. The ductile iron body has Stainless, Simriz Viton® and Teflon internals. It is available in any configuration with register, printer, air eliminator/strainer and preset with valve. The Veeder Root register reads in gallons and tenths to 10,000. Part No. TM 68215-AFL2 Meter & Register............................ TM 68215-AFL2P Meter & Register w/ith 10:1 Pulsar TM 68215-AFL2X Meter & Register with 100:1 Pulsar TM 68215-AFL3 Meter, Register, Printer.................. TM 68215-AFL4 Meter, Register, Air Eliminator....... TM 68215-AFL6 Meter, Register, Printer, Air Elim.... TM 68215-AFL11 Meter, Register, Printer, Air Eliminator, Preset & Valve.............. TM 68215-SS2ATD 304SS Meter & Register *............. TM 700740-20AF 2” Iron Air Eliminator/Strainer........ * Certified for “DEF” and other selected products.

Wt. RETAIL 110 lbs. $ 3596.56 110 lbs. 3975.78 110 lbs. 4289.34 120 lbs. 4740.92 170 lbs. 5042.42 180 lbs. 6019.28 230 lbs. 110 lbs. 85 lbs.

9501.94 5918.78 1925.58

Stealth Oval Gear Meters Stainless 1" & 1-1/2" meters are suitable for ag chemicals and fertilizers. Aluminum meters are suitable for refined fuels. Legal for direct resale - (NTEP Certified) on most of these products, call to verify. Stainless meters have HVPPS/Teflon rotors and teflon seals. Aluminum meters have LVPPS/Carbon rotors and Viton® seals. Available with electronic or mechanical (veedor root) heads. Reads in gallons and 1/10ths. Two moving parts • Calibration is relatively unaffected by viscosity (viscosity limit of 40 Wt. oil for legal resale) • Strainer/air eliminator available as an option.

* For DEF Only (304SS)

Pump & Meter Units for Ag-Chemicals Pump & Meter Unit for Transfer of Ag-Chemicals & Other Liquids The PM2810 is an excellent pump and meter unit for transfer from bulk storage to portable containers. It is suitable for most all agricultural chemicals and herbicides. The 2" self priming Flomax Pump can be supplied either with a single phase or a three phase motor. The 40 GPM TCS Meter is NTEP Labeled. The register will record to 10,000 gallons. A Ticket Printer and Preset Valve are optional at added cost. Tee on pump discharge is included for “recirculation” plumbing back to tank.

TS101 with Electronic Head

• 1-1/2” Aluminum: 60 GPM/150 PSI Maximum. • 1” Stainless: 40 GPM/250 PSI Maximum. • 1-1/2” Stainless: 45 GPM/400 PSI Maximum. Not Recommended for Abrasive Liquids. Confirm Chemical Compatibility Before Ordering. Special Remote Digital Readouts Available for Flammable Liquids. Part No.

Description

Wt.

FR TS105A 1" 316 Stainless Meter with Veedor Root Head.... FR TS101 1-1/2" Aluminum Meter with Electronic Head.......

RETAIL

Viton® is a registered trademark of DuPont Performance Elastomers

(800) 228-9666

Part No. PUMP & METER UNITS Wt. DU PM2810-T 3HP - 3 Ph. Pump & Meter Unit with TCS Meter......................... 200 lbs. DU PM2810T5 5HP - 3 Ph. Pump & Meter Unit with TCS Meter......................... 235 lbs. Note: Other Motor/Meter Combinations are available.

7378.04

2" & 3" Models also available

DULTMEIER SALES • OMAHA, NE

PM28105

The pump and meter are plumbed with iron fittings, one 1-1/2" stainless ball valve, cast iron strainer, stainless air eliminator and chemical hose. Steel stand.

35 lbs. $ 5159.00 62 lbs. 4186.16

FR TS104A 1-1/2" 316 Stainless Meter with Veedor Root Head 115 lbs.

IND

245

•

www.dultmeier.com

• DAVENPORT, IA

(800) 553-6975

RETAIL $ 7017.58 7182.40

E0305

Liquid Plant Equipment

246

Heavy Duty Industrial Grade Mini Bulk Tank Rack System This Heavy Duty Tank Racking System is ideal for use in chemical plants integrating mini-bulk chemicals into a larger carrier system. This racking system comes with optional pump stands mounted on the back reducing the plumbing and keeping your plumbing setup clean. The tanks sit on the racks at a slight angle to optimize drain out.

Call for Details & Pricing! Chemical Tote Filling Station Drip Tray This Stainless Steel Drip Tray is the ideal way to store your individual chemical hose end nozzles. This will help keep all your lines separated and organized. The drip tray design will catch any excess chemical from the hose end nozzle and helps ensure you maintain a safe and clean work environment.

Call for Details & Pricing!

Call Us with All Your Meter System Requirements. Meters We Offer Include: • • • • • • •

Turbine Meters (Sponsler & GPI) Positive Displacement* (TCS) Lube Oil (GPI) Digital (Sotera, Scienco, GPI, Raven, Dura) Fuel (Fill-Rite, GPI) Mass Meters* (Micromotion) Meter Control Systems

* Note: PD & Mass Meters are legal for direct resale (custody transfer)

Mass Meter Stands Part No. DU MASS-STD4

IND

Description RETAIL Mass Meter Stand....... $ 1847.86

DULTMEIER SALES • OMAHA, NE

(800) 228-9666

•

www.dultmeier.com

• DAVENPORT, IA

(800) 553-6975

E0301

OPW Load Arms & Swivel Joints

247

OPW Swivel Joints

OPW Spring Balance Load Arms

Use OPW swivel joints with rigid piping for loading and unloading liquids without the difficulty of manhandling heavy, cumbersome hoses. True Ball Bearing Race Alignment: Body and tail sections are locked together by a double row of ball bearings. Races are precision machined.

Loading arms make tank filling easy and efficient because positioning the tanker is less critical. The arm can easily be moved horizontally and vertically. The J32F is a complete load arm assembly with “EZ Adjust” torsion spring balance, link collar, lockdown, swivel joint and stainless pipe and elbow with 4' drop hose and stainless splash deflector. Flanged inlet connection. Flow limits: 350 GPM on 3", 600 GPM on 4". Locks in any of 3 positions between horizontal and 15° below horizontal. Also swivels around vertical axis (double plane swivel).

Wt. Part No. FPT Material Seal Lbs. OP 3830-0201 2" Ductile Iron Buna 8 OP 3830-0301 3" Ductile Iron Buna 15 OP 3830-0401 4" Ductile Iron Buna 22 OP 3830-0203 2" Ductile Iron Teflon 8 OP 3830-0303 3" Ductile Iron Teflon 15 OP 3830-0403 4" Ductile Iron Teflon 22

RETAIL $ 395.30 636.50 892.44 647.22 730.30 1017.06

Standard with a ductile iron swivel with Teflon seals. “Upfeed right-hand” standard (upfeed left-hand also available). “EZ Adjust”spring balances are included in all models.(See “E-Z Adjust block below).

J32F Load Arm

Wt. Part No. FPT Material Seal Lbs. RETAIL OP 3840-0301 3" Ductile Iron Buna 19 $ 754.42 OP 3840-0401 4" Ductile Iron Buna 28 0.00 OP 3840-0303 3" Ductile Iron Teflon 19 822.76 OP 3840-0403 4" Ductile Iron * Teflon 28 1177.86 * E-Coated.

3858 Swivel Joint UpFeed Right Hand

STYLE 40 1 plane of rotation

NOTE: NOT for use with spring balances or counter weights.

Wt. Part No. FPT Material Seal Lbs. RETAIL OP 3858FO-301 3" Ductile Iron Buna 26 $ 1586.56 OP 3858FO-0401 4" Ductile Iron Buna 37 2091.74 OP 3858FO-0303 3" Ductile Iron Teflon 26 2091.74 OP 3858FO-0403 4" Ductile Iron Teflon 37 2393.24

Many Other Styles & Materials Available Call for Details!

10' or 12'

STYLE 30 1 plane of rotation

Part No. DU J32F-3 DU J32F-312 DU J32F-4 DU J32F-412

Description Wt/Lbs. RETAIL 3" x 10' Load Arm Assembly, EZ Adjust 180 $ 6809.88 3" x 12' Load Arm Assembly, EZ Adjust 190 6864.82 4" x 10' Load Arm Assembly, EZ Adjust 260 7749.22 4" x 12' Load Arm Assembly, EZ Adjust 270 7635.32

Replacement Swivels Flanged by FPT for Spring Balance Arms / Upfeed Right Hand Part No. Description Wt/Lbs. RETAIL OP 3858FO-0303 3" DI Epoxy Coated Swivel / Teflon 32 $ 1818.38 OP 3858FOZP-403 4" DI Epoxy Coated Swivel / Teflon 45 2438.80

STYLE 58 2 planes of rotation for use with spring balances

EZ Adjust Spring Balance The 790 EZ Adjust Spring Balance allows a full range of adjustments with a 5/8” socket wrench. Eliminates the adjustment problems when load arms are used with different discharge heights. Available in A/B/C spring weights for different length load arms.

SEAL KITS FOR OPW SWIVEL JOINTS Part No. RETAIL OP 3000RK-0201 2" Buna Seal Kit........... $ 33.10 OP 3000RK-0301 3" Buna Seal Kit........... 34.44 OP 3000RK-0401 4" Buna Seal Kit........... 41.41 OP 3000RK-0303 3" Teflon Seal Kit.......... 197.32 OP 3000RK-0403 4" Teflon Seal Kit.......... 242.54

OPW Supported Boom Load Arm

DU BT32F Load Arm employs a supported boom mounted to a single plane flanged swivel from an upfeed riser. This provides 180° movement. The 3858 Spring Balance swivel allows horizontal and vertical adjustment with a lockdown in any of three positions from horizontal to 15° below. The 3858 Swivel is epoxy-coated (inside) with Teflon internals. The 3420 Swivel is fabricated steel, flanged both ends. The discharge pipe is SCH10 Stainless with a 4 ft. drop hose and Stainless deflector. The horizontal feed pipe is SCH40 black steel. “EZ Adjust” spring balances are included (see Description RETAIL

Replacement Spring Balances Used With Load Arm Systems at Right Part No. OP 790A OP 790B-X461

above for details).

EZ Adjust Style, “A” Spring Balanced, White......... $ 3670.26 EZ Adjust Style, “B” Spring Balanced, Yellow........ 3421.02

Stainless Steel Discharge Deflectors Discharge Deflectors are designed to deflect full flow stream to the side to minimize splashing when used with a drop hose on loading arms. If used with a flexible discharge hose such as “Ironsides”.The hose and deflector can be pulley-raised to prevent drippage when not in use.

Part No.

The complete BT32F unit as shown includes the flanged inlet swivel, horizontal pipe, EZ adjust spring balance on outboard swivel, lockdown, discharge pipe and drop hose. Overhead supporting structures for the horizontal pipe are not included and must be provided by the installer.

Size RETAIL

DU DEF30SST 3" Stainless Deflector............. $ 164.82 DU DEF40SST 4" Stainless Deflector............. 213.06 DU DEF60SST 6" Stainless Deflector............. 403.34

IND

DULTMEIER SALES • OMAHA, NE

(800) 228-9666

Part No. Description DU BT32F-4X12 4" x 12' Supported Boom Load Arm •

www.dultmeier.com

• DAVENPORT, IA

(800) 553-6975

Wt. RETAIL 360 lbs. $ 9514.00

E0321

NH3 & VisaGage Accessories • Fertilizer System

248

Totally Tubular Fertilizer Placement System TotallyTubular Systems provide for precise placement of starter fertilizer approximately 1/4” below the seed bed to optimize starter fertilizer root uptake and effectiveness (Use Model T300 tubes to apply liquid nitrogen fertilizer solution beside the seed trench behind the closing wheels). These durable 3/8” stainless tubes are custom manufactured to fit the planter models noted below and include all stainless mounting hardware (No welding required).Independent test showed a 5% yield increase on corn, compared to traditional starter fertilizer placement systems. Designed to fit John Guest 3/8” tube fittings. The optional seed bounce flap closes the opening between the disc openers, assuring correct seed placement by eliminating bounce and ricochet. Recommended: Replace disc openers when you install tubes. Check valves should also be utilized with these fertilizer tubes, close to the tube. (See our diaphragm check valves).

TT 300

TT 006 Shown Installed

TT SEEDTOOL

JOHN DEERE Part No.

Seed Depth Tool

Description RETAIL

TT 006 1700 Series with XP Row Units.......................... $ 73.70 TT 009 John Deere ExactEmerge Planter........................ 73.03 TT 007 1700 Series MaxEmerge 5.................................. 74.37 TT 002 1700,7300,7200 Series (Non XP) Units.............. 72.36 TT 001 7000,7100 Series Planter.................................... 72.36 TT 001-OS John Deere Oversized Roll Pin for 1700.............. 75.71

CASE Part No.

Description RETAIL

Part No.

Description RETAIL

TT 100 2011 Case Planters & Older......................... $ 34.71 TT 10012 2012 Case Planters & Newer....................... 37.12 TT 125 All Case Planters-Below Seed Option........... 37.12

KINZE Part No.

Description RETAIL

TT 401 TT 301 TT 001-OS

4000 Series Planter..................................... $ 73.03 3000 Series Planter..................................... 56.28 Kinze Oversized Roll Pin for 1700................ 75.71

Part No.

Description RETAIL

MONOSEM TT 700 TT 700V

Monosem Fert. Tube w/attached Std. Point. $ 52.53 Monosem Fert. Tube w/attached V-Slice Pt.. 78.39

Part No.

Description RETAIL

NITROGEN TUBE SYSTEMS

WHITE TT 260 TT 200 TT 290

6000 Series Planters.................................... $ 75.71 8000 Series Planters.................................... 75.71 9000 Series Planters.................................... 75.71

Part No.

TT 400

Nitrogen/Liquid Fert. Placement Tube........... $ 56.28 Nitrogen/Liquid Fert. Placement Tube for CASE IH. 44.49

Part No.

Description RETAIL

Optional Items

GREAT PLAINS Description RETAIL Starter Fertilizer Placement Tube................. $ 91.12

TT 008

TT 300 TT 300-CASE

Seed Bounce Flap

TT 008 Seed Bounce Flaps...................................... $ 11.32 TT SEEDTOOL SS Seed Depth Tool, Measure Up to 5”....... 14.67

NH3 VisaGage II with Liquid Blockage Monitor System

VisaGage Orifice Selectors Turn Your VisaGage II Into A Self-Contained Orifice Changing System FEATURES: • Turn your VisaGage II into a self-contained orifice changing system. • This patent-pending system is the first of its kind on the market today! • Simply select from one of four orifice settings on each disc. (4) Discs provided for (16) different options. (Orifice diameters: 0.031,0.048, 0.069, 0.099, 0.107, 0.125, 0.142, 0.150, 0.024, 0.039, 0.059, 0.084, 0.116, 0.133, 0.148 & 0.162). Other discs available. • You won’t get wet from fertilizers or chemicals when changing orifices. • Adjustment is quicker, no need to travel to each row unit and work with plumbing near the ground. • Best operating pressure range: 15 - 40 PSI (100 PSI Max). • Use with CV1103 Check Valves - install downstream at each row. Part No.

VisaGage Orifice Selectors

RETAIL

(800) 228-9666

• Now you can monitor your NH3 Flow from the tractor cab. • System shows both low & no-flow. Premium system shows high flow. • Correct problems immediately or pause to capture the row for investigation later. • Compatible with N-Serve. • Lightweight polished aluminum manifold with PGP translucent flow monitors. • Each monitor includes (5) indicator balls for rate variation. • Must be used with BU BMI-08 or BU BM-08PL Control Systems (see adjacent page). Part No.

BU SMPT-OSA1 Single VG II Orifice Selector Kit................... $ 28.27 BU SMPT-OSA4 Set of 4 VG II Orifice Selector Kit................. 99.83 DULTMEIER SALES • OMAHA, NE

FEATURES:

VisaGage II With LBMS

RETAIL

BU SMFD2-NH3 Flow Monitor Assembly NH3, Set of 2......... $ 73.70 BU SMFD4-NH3 Flow Monitor Assembly NH3, Set of 4......... 186.26 •

www.dultmeier.com

• DAVENPORT, IA

(800) 553-6975

E1088

ShieldAG/Acra-Plant Knives ShieldAg/Acra-Plant Chrome Carbide “Sweeps & Points”

ShieldAg/Acra-Plant V-Shot Planter Knives The V-Shot offers precision seed placement while applying starter fertilizer. As planter blades become worn, over time, they begin to lose the ability to create a uniform seed bed. A deep V planter-crease ensures that the seed is properly seated in the bed. As the planter blades become worn, this crease eventually becomes an unruly crevice that can no longer ensure proper seed placement. The V-Shot eliminates this issue. Not only does the V-Shot ensure proper seed placement by taking worn planter blades out of the equation, it also allows growers to place a starter fertilizer in the seed bed. The V-Shot is bolted directly to the implement and protects the liquid fertilizer tube, as well. * All V-Shots are packaged with 3 feet of poly tubing, zip ties, check valve, hardware and installation manual. * Sold in sets of (4) only.

Acra-Tuff Danish Tynes & Field Cultivator Sweeps These alloy Danish tynes and field cultivator points/sweeps will outlast stamped steel parts by 3 to 5 times! The additional chrome carbide (26%) which is added to these products, helps to ensure greater longevity and less time spent replacing points – ultimately lowering operating costs. Many competitors only add 12-15% chrome carbide to their products. You will get nothing short of quality with ShieldAg Products. These points have various uses but common applications include field cultivation for potatoes, beets, and other specialty crops.

AP-1985V-SHOT

249

AP-860402

AP-1985V-SHOTG AP-860102

AP-860202

Part No.

Description

RETAIL

BE AP-860102 1” Spike with Hardware & Shim, Single Hole Mount....... $ 12.93 BE AP-860202 2-3/4” Goosefit with Hdwe & Shim, Single Hole Mount.. 14.47 BE AP-860402 4” Sweep with Hdwe & Shim, Single Hole Mount........... 15.68

Kongskilde (CNH-New Holland Tillage) 2-Hole Danish Type for Consertine Shanks, VTH, VTL & VTM Styles

AP-9885V-SHOT D

AP-861402 AP-861202 D

AP-4985V-SHOT D

Part No.

AP-1785V-SHOT-7100 Part No.

Description

RETAIL

BE AP-861202 2-3/4” 2-Hole Mount with Hardware - No Shims............. $ 12.93 BE AP-861402 4” 2-Hole Mount with Hardware - No Shims................... 29.75

Acra Replacement Point for Orthman

RETAIL

BE AP-1985V-SHOT For John Deere 2005 to Present*..................... $ 475.70 BE AP-1985V-SHOTG For Tough Soil John Deere 2005 to Present **. 475.70 BE AP-9885V-SHOT For CaseIH 1200 Series and Later..................... 475.70 BE AP-4985V-SHOT For Kinze 4000 Series Planters......................... 475.70 BE AP-1785V-SHOT-7100 For Kinze 2000 & Early John Deere ME 7000/7100 475.70

* Designed for XP, XP Pro & MaxEmerge® 5 ME5 Row Units - Does NOT Fit Exact Emerge. ** Same AS 1985V-SHOT But Shorter Version is for Tough Soil and Does NOT Hang as Far Below the Blades as 1985V-SHOT.

The Best Just Got Better! This point is a direct replacement for Orthman p/n 164-054 & 164-057. Create more lift and fracture of the soil for enhanced strip-till results. Reduced wear on the OEM shank. The “Diamond” nose is of a new design taken from the standard ShieldAg ST-series knives – designed to increase wear life. The design of the mole foot (and fin) will reduce sidewall compaction and essentially eliminate any gully-washing down the strip-tilled row. Which leaves no need to worry about heavy rains within a week or two of the strip-till pass. Part No.

Description

AP-800106 D

RETAIL

BE AP-800106 2-3/4” 2-Hole Mount with Hardware - No Shims............. $ 118.59 DULTMEIER SALES • OMAHA, NE

(800) 228-9666

•

www.dultmeier.com

• DAVENPORT, IA

(800) 553-6975

E1231

Visual Flow Spray Monitors

250

VisaGage II Visual Flow Spray Monitors CDS-John Blue’s VisaGage II will let you know immediately if an outlet is plugged, thus showing possible variations in you applications rates. FEATURES: • Manufactured with chemical resistant polypropylene adapters and light blue, clear PVC body with an additive for UV protection. • Get the exact number of flow monitors for spraying or fertilizer applications by simply banking together single columns, SMSS1 (spraying) or SMFD1 (fertilizer applications with squeeze or ground drive pumps). • The set of 4 flow monitor assemblies (SMSS4 or SMFD4) can also be connected for additional columns divisible by four. Snap them together with the stainless steel clips and o-rings and go. • Units with (-FUM) are designed specifically for fumigants, including telone. Constructed of polysulfone chemical-resistant bodies with UV protection; Viton® seals. Light in color. See Adjacent Spray Monitor Pages for Mounting Brackets • Standard with Viton® O-Rings.

D D D

BU SMSS1 Single Flow Spray Monitor

BU SMSS4 Set of Four Spray Monitor Assembly

BU SMFD4 Set of Four Monitor Assembly for Squeeze Pumps

BU SMFD1 Single Flow Monitor for Squeeze Pumps

BU SMPT-0009 Ball Storage Unit (Clips on)

BU SMSS1-FUM Single Flow Monitor for Fumigants

D D

BU SMPT-0014 Tee Spray Monitors Part No.

BU SMPT-0049 Flanged Tee

BU SMPT-0021 Stainless Steel Ball

BU SMPT-0053 Tube Adapter

Description

BU SMSS1 Single Flow Spray Monitor Assembly: Includes single body, 3/8” FPT female inlet & outlet...... BU SMSS4 Set of 4 Flow Monitor Assembly: Includes (4) bodies, 1/2” FPT female inlet, 3/8” female outlet. BU SMSS4-PE14 Set of 4 Flow Monitor Assembly: Includes (4) bodies, 1/2” FPT female inlet, 1/4” x 90° Tube Fitting outlet... BU SMSS4-PE38 Set of 4 Flow Monitor Assembly: Includes (4) bodies, 1/2” FPT female inlet, 3/8” x 90° Tube Fitting outlet... BU SMSS1-FUM Single Flow Spray Monitor Assembly for Fumigants, 3/8” Inlet/Outlet...................................... BU SMSS4-FUM Set of 4 Flow Monitor Assembly for Fumigants, 1/2” FPT Inlet, 3/8” Outlet...............................

RETAIL

$ 25.33 82.41 105.19 106.53 32.96 104.52

Monitors for use with Squeeze & Ground Drive Pumps Part No. Description

BU SMFD1 Single Flow Squeeze Monitor Assembly - Flow Divider Type: 3/8” FPT Inlet/Outlet......................... $ 22.11 BU SMFD1-PE38 Single Flow Monitor Assembly - Flow Divider Type: 3/8” Tube Fitting Inlet; 3/8” x 90° Tube Fitting Outlet... 30.95 BU SMFD4 Set of 4 Flow Monitor Assembly - Flow Divider Type: 3/8” FPT Inlet/Outlet...................................... 85.36 BU SMFD4-PE14 Set of 4 Flow Monitor Assembly - Flow Divider Type: 1/4” Tube Fitting Inlet; 1/4” x 90° Tube Fitting Outlet............. 109.88 BU SMFD4-PE38 Set of 4 Flow Monitor Assembly - Flow Divider Type: 3/8” Tube Fitting Inlet; 3/8” x 90° Tube Fitting Outlet.......... 106.53 BU SMFD1-FUM Single Flow Squeeze Pump Monitor for Fumigants, 3/8” FPT Inlet/Outlet........................................ 28.54 BU SMFD4-FUM Set of 4 Flow Monitor Assembly - Flow Divider Type for Fumigants, 3/8” FPT Inlet/Outlet............. 105.86 Accessories Part No.

BU SMPT-0053 BU SMPT-0052 BU SMPT-0051 BU SMPT-0009 BU SMPT-0014 BU SMPT-0049 BU SMPT-0021 BU SMPT-0007 BU SMPT-0034

Description

90 Degree 3/8” Tube Adapter ....................................................................................................... 90 Degree 5/16” Tube Adapter ..................................................................................................... 90 Degree 1/4” Tube Adapter ....................................................................................................... Ball Storage Unit: Holds up to 40 balls. Lid can be locked........................................................... Tee: For spray type use with typically (8) total bodies, includes 1/4” gauge port, 1” FPT ............. Flanged Tee: For spray type use with typically (8) total bodies, includes 1/4” gauge port, 1” FPT 7/16” Stainless Steel Ball: For use with extra high flow rates....................................................... #212 Viton® O-Ring: Used with top and bottom Adapters............................................................ #112 Viton® O-Ring: Used to seal orifice plates..........................................................................

SPRAY MONITORS LESS 8% On 6 or 10% On 24 Of One Size

$ 7.91 7.37 7.10 9.92 9.25 10.72 2.81 2.95 1.34

Viton® is a registered trademark of DuPont Performance Elastomers

DULTMEIER SALES • OMAHA, NE

(800) 228-9666

•

www.dultmeier.com

• DAVENPORT, IA

(800) 553-6975

E0882

Liquid Blockage Monitor System

251

Liquid Blockage Monitor System Now You Can Know Your Liquid Application Flow from the Cab of Your Tractor! Now you can know your liquid application flow from the cab of your tractor. Identify which row is being under applied before your yields are diminished, saving valuable time and money. This system shows you both low-flow and no-flow problems now, which means you can correct it immediately. No more second guessing if any of your delivery lines are plugged! Note: Can also be used for NH3 with BU SMFD4-NH3 VisaGauge Flow Monitor.

Premium System (Wireless) i-Pad® Based

Features of the CDS-John Blue Liquid Blockage Monitor System: • Uses magnetic sensing technology mounted behind the VisaGage II Flow Monitors. • Sensors can be mounted to existing VisaGage II’s, new magnetic balls are supplied with sensors. • Identifies where magnetic balls are floating in each row during liquid application. • Only LBMS shows both no-flow and low-flow. Plus the premium I-Pad® based systems displays high flow, indicating broken tubing or fittings. • See a visual display and hear an audible alarm on the control panel from your tractor cab. • Each row with a problem will be highlighted by a flashing LED light at the row. No need to remember or search for which row is blocked after you come to a stop.

• Can be used with cloudy or dark liquids - LED is visible to the column sides.

Standard Control Panel (Wired)

• The alarm will reset automatically when the blockage has been corrected. • Includes the ability to “Pause” the system to capture problem rows for investigation later when you are able to stop.

Flow Monitors Not Included - See Other Pages

• LBMS I-Pad® and other tablet apps are free. Sensor Assembly 4 Rows

VisaGage II

Order (1) Main Kit (8 Rows) Plus 4 Row Expansion Kits to Cover All Your Rows (extra rows or expansion kits are fine) Premium WIRELESS System (iPad 2 or Newer Display Running IOS 6 or Higher) * Part No.

Description

BU BMI-08 Premium 8 Row Kit Includes: iPad Ram Mounting Bracket, Power Harness, 28 ft. Extension Harness, Wireless Sensor Kit, Standard Sensor Kit and (2) Terminator Plugs.................................................................... BU BM-08ISO Premium 8 Row Wireless Kit: ISOBUS.............................................................................................................. BU BM-08ISO-JD Premium 8 Row Wireless Kit: ISOBUS for John Deere.....................................................................................

RETAIL

$ 1298.46 2397.26 2424.06

Standard WIRED System * Part No.

BU BM-08PL

Description

Standard Wired 8 Row Kit Includes: Control Panel with Mount Bracket, Input Harness, 28 ft. Extension Harness, Tee Harness, (2) Standard Sensor Kits, (2) Terminator Plugs and (2) 15 ft. Extension Harnesses...................... $ 1177.86

4-Row Expansion Kit Part No.

Description

BU BMPT-001

4 Row Sensor Expansion Kit for adding to BMi-08, BM-08AP and BMPT-08PL: Includes Standard Sensor, Tee Harness, Magnet Balls and Hardware...............................................................................

Part No.

Description

Spare Parts

BU BMPT-002 BU BMPT-013 BU BMPT-015 BU BMPT-023 BU BMPT-003

Standard Sensor (Replacement).......................................................................................................................... 15 ft. Harness, Extension Cable........................................................................................................................... Terminator Receptical (Replacement).................................................................................................................. RAM Mounting Bracket for IPAD........................................................................................................................... Wireless Sensor ONLY (Non ISO)........................................................................................................................

467.66 $ 435.50 89.11 17.82 125.29 561.46

* VisaGage II Flow Monitors are ordered separately. DULTMEIER SALES • OMAHA, NE

(800) 228-9666

•

www.dultmeier.com

• DAVENPORT, IA

(800) 553-6975

E1051

Spray Monitors & Parts

252

Wilger Spray Monitors provide accurate monitoring of all spray tips or orifices on planters with a quick glance. Modular, flexible and durable. Bodies constructed of tough UV-Resistant Polymethylpentene. Inlet and outlet fittings made of polypropylene and Celcon. FEATURES: • Modular Design with individual columns & Wilger’s innovative o-ring seal & joint clip allows you to quickly assemble “banks” to fit your requirements.

• FKM O-rings are standard (Viton® available); Stainless u-clips. • Each Monitor Column Includes (4) indicator balls (Green, Red, Maroon & Silver).

• Various Inlet & Outlet Sizes in straight & 90 degree hose barb styles. See Adjacent Spray Monitor Pages for Mounting Brackets

Pre-Assembled Spray Monitors: (Can be easily taken apart or added to)

Part No. Columns Inlet Outlet RETAIL WL 3999-1 4 3/4" HB 90 1/4" FPT 90 $ 88.44 WL 3999-1A 4 3/4” HB 90 1/4” Tube Adapter 90 93.13 WL 3999-2 4 3/4” HB 90 3/8” Tube Adapter 90 95.81 WL 3999-2HB 4 3/4” HB 90 3/8” HB 90 88.44 WL 3999-8 4 3/4” HB 90 1/2” HB 90 86.43 Single Column “Starters” for Above Monitors : (includes Body, 4 Balls, SS Clips & Inlet, End Cap & Outlet. Note: Use with “Isolation” Tee for Squeeze Pump Monitors).

WL 3999-2 Spray Monitor

Part No. Inlet WL 3999-1414 1/4" FPT 90 WL 3999-3838 3/8” HB 90 WL 3999-1212 1/2” HB 90 WL 3999-3414 3/4” HB 90 WL 3999-3438 3/4” HB 90 WL 3999-3412 3/4” HB 90

WL 3999-3412 Spray Monitor “Starter”

Outlet 1/4" FPT 90 3/8” HB 90 1/2” HB 90 1/4” FPT 90 3/8” HB 90 1/2” HB 90

RETAIL $ 26.80 26.67 26.80 26.13 26.13 27.47

Single Column “Adders” for Above Monitors:

LESS 10% On 6+ or LESS 12% On 24+ of One Size

(includes Body, 4 Balls, SS Clips & No End Cap)

Part No. Inlet WL 3999-0014 - WL 3999-0038 - WL 3999-0012 -

WL 3376-4 “Squeeze Pump” Monitor

RETAIL $ 21.57 21.57 21.57

*Pre-Assembled “Squeeze” Pump Monitors for Squeeze Pumps: Part No. Columns Inlet Outlet RETAIL WL 3376-6 2 3/8" HB 90 3/8" HB 90 $ 38.86 WL 3376-4 4 3/8” HB 90 3/8” HB 74.37 WL 3376-7 2 1/2” HB 90 1/2” HB 90 38.86 WL 3376-5 4 1/2” HB 90 1/2” HB 78.39 Also use with Ground Drive Pumps.

Outlet 1/4" FPT 90 3/8” HB 90 1/2” HB 90

WL 3999-0038 Spray Monitor “Adder”

Non-Assembled Squeeze Pump Components

WL 20480

WL 40436-B5

Spray Monitor

Jet Cap x Tube Adapter

• “Bank Your Own” • Very Compact • Isolation Tees Not Required

WL 20512

WL 20519

WL 20523

WL 20525

Elbow

1/4” FPT Fitting

Isolation Tee (Blank Tee)

1” FPT Clip Tee

Spare Parts Part No. WL 20521 End Cap with SS Clip ............................. WL 20523 “Isolation” Tee with 3/8” FPT Outlet......... WL 20525 1” FPT Clip Tee with 1/4” Gauge Port...... WL 20535 End Cap with 1/4” FPT Port.................... WL 20536 End Cap with 3/8” FPT Port.................... WL 20537 End Cap with 1/2” FPT Port.................... WL 20519 1/4” FPT Outlet Fitting............................. WL 20518 1/4” FPT Elbow....................................... WL 20511 3/8” HB Elbow......................................... WL 20512 1/2” HB Elbow......................................... WL 20513 3/4” HB Elbow......................................... WL 20501 3/8” Hose Barb, Straight.......................... WL 20502 1/2” Hose Barb, Straight.......................... WL 20503 3/4” Hose Barb, Straight.......................... WL 20460-01 Body Only, Spray Monitor....................... WL 20480-01 Body Only, Squeeze Pump Monitor........ WL 20460-V Viton® O-Ring......................................... WL 20460-03 FKM O-Ring............................................ WL 20460-04 SS U-Clip................................................

Part No. RETAIL WL 20480 Bottom Feed “Squeeze” Pump Monitor, 1Column with 4 Balls & U-Clip . $ 15.14 Bottom Inlet Combo-Jet Cap Options: (1 Required per Column Above; Installs with 90° Twist; FKM O-ring & inline Diffuser Included): Part No. RETAIL WL 40422-B5 Combo-Jet Cap with Integral 1/4” Hose Barb, Straight .......... $ 2.14 WL 40424-B5 Combo-Jet Cap with Integral 3/8” Hose Barb, Straight........... 2.14 WL 40426-B5 Combo-Jet Cap with Integral 1/2” Hose Barb, Straight........... 2.14 WL 40435-B5 Combo-Jet Cap with Integral 1/4” Tube Adapter (Push-In Style) 4.15 WL 40436-B5 Combo-Jet Cap with Integral 3/8” Tube Adaper (Push-In Style) 4.29 WL 40273-B5 Combo-Jet Cap with Integral 1/4” FPT.................................... 2.14 Top Outlet Fitting Options: (Install with SS U-Clip on Monitor, FKM O-Ring Included): Part No. RETAIL WL 20516 1/4” Tube Adapter (Push In, 90° Elbow) ...................................... $ 4.82 WL 20528 5/16” Tube Adapter (Push In, 90° Elbow) .................................... 5.36 WL 20517 3/8” Tube Adapter (Push In, 90° Elbow)....................................... 5.36 WL 20511 3/8” Hose Barb, 90° Elbow........................................................... 2.68

RETAIL $ 3.35 6.03 6.70 4.15 4.15 4.15 2.68 2.68 2.68 2.68 2.68 2.68 2.68 2.68 13.27 10.72 1.74 0.27 1.47

Viton® is a registered trademark of DuPont Performance Elastomers

DULTMEIER SALES • OMAHA, NE

(800) 228-9666

•

www.dultmeier.com

• DAVENPORT, IA

(800) 553-6975

E0850

Metering Orifices

253

Metering Orifices

Meter Your Flow with Wilger Orifices Metering Orifices Provide a Simple, Leak-Free Solution that Eliminates the Need for Additional Components. • Orifice is Placed into Flow Indicator Outlet Fitting for Easy Access • Ribs On Bottom of Metering Orifice Prevent Ball from Restricting Flow, Eliminating Need for Ball Retainer

Metering Orifice

• Orifices Available to Meter Flows Ranging from 0.004 to 8.0 GPM

To select a Metering Orifice from the chart below, follow these steps: Step 1: Calculate the Flow Rate Required Per Flow Indicator with the following formula: Flow Rate = Application Rate (US gal/acre) x Speed (mph) x Outlet Spacing (inches) x # of Outlets per Flow Indicator x Conversion Factor * ÷ 5940

* The Metering Orifice Selection Chart is based on water. Fertilizer is heavier than water, so a larger orifice is required for a given flow rate of fertilizer, compared to water. To determine the conversion factor for a given fertilizer, obtain the weight for one US gallon or the specific gravity of the fertilizer and select the applicable conversion factor below.

Step 2: Select a Metering Orifice and operating pressure. On the chart below, locate the flow rates closest to your requirement. Select a Metering Orifice with a flowrate at an operating pressure in the middle of its range (i.e. at 15 - 20 PSI).

Metering Orifices

Part No. Description RETAIL WL 21009-00 thru 21250-00 * Metering Orifice with FKM............ $ 3.89 WL 21009-V0 thru 21250-V0 * Metering Orifice with Viton®........ 4.96 * The (3) numbers following 21 are the orifice size in 0.000”; Suffix (-00) for FKM, (-V0) for Viton®. — Less 10% on 50 of One Size — Viton® is a registered trademark of DuPont Performance Elastomers

DULTMEIER SALES • OMAHA, NE

(800) 228-9666

•

www.dultmeier.com

• DAVENPORT, IA

(800) 553-6975

E1049

Redball Spray Monitors & Parts

254

Spray Monitors for Squeeze Pumps

Spray Monitor Accurately monitor the flow rate on your liquid fertilizer and chemical application equipment.

Plugged Nozzle

These Red Ball Monitors are Specifically Designed to be Used with Squeeze Pumps Features: Rugged, reliable design • Easy to use and install • Detection of plugged nozzles and worn or damaged tips • Detection of leaks in hoses and connections • Increase yields by proper application.

Pressure Gauge

PUMP

No. 3376-2 One Piece Body

VALVE

The RED BALL Spray Monitor is a simple gauge that allows you to visually monitor proper flow rate of your liquid fertilizer and herbicide applications. It shows immediately if a nozzle becomes plugged as little as 10% and it tells you, at a glance, any variation in your application rate. Standard with 3/8” 90° discharge elbows. One piece bodies. Features: Rugged, reliable design • Easy to use and install • Detection of plugged nozzles and worn or damaged tips • Detection of leaks in hoses and connections • Increase yields by proper application. Part No. HY 3376-2

Part No. HY 3999-1414 HY 3999-1212 HY 3376-4 HY 3376-5 HY 3376-6 HY 3376-7

Size 1/4” 1/2” 3/8" 1/2" 3/8" 1/2"

Description RETAIL 1-Column for Squeeze Pumps......... $ 31.62 1-Column for Squeeze Pumps......... 36.05 4-Column for Squeeze Pumps......... 95.81 4-Column for Squeeze Pumps......... 95.81 2-Column for Squeeze Pumps......... 63.38 2-Column for Squeeze Pumps......... 61.64

Single Column Spray Monitor Parts Ref.# Part No. Description

Description RETAIL 3/8" 4 Row Monitor/Sprayer........................ $ 91.12

Spray Monitor Replacement Parts List

1 MZ 2133 MZ 2134 MZ 2135 1A MZ 20519 2 MZ 2140 3 MZ 2137 5 MZ 2037 6 MZ 2139 7 MZ 2138 8 MZ 2136 9 WL 20525

Part No.

1 MZ B35M 2 TW C3800-90 2 TW C1200-90 3 MZ 31W 3 MZ 31V 4 MZ RB20 4 MZ RB21 4 MZ RB22 4 MZ RB23 4 MZ RB24 4 MZ RB25 5 HY 100-3376 6 MZ RB26 7 TW N35 – HY 3430-274 – MZ RB27 – MZ RB28

Description

RETAIL

3/4" FPT Poly Nut.................. 3/8" Nylon Elbow with Tips..... 1/2" Nylon Elbow with Tips..... EPDM Gasket / Standard...... Viton® Gasket........................ Set of 4 Red Balls / Glass...... Set of 4 Red Balls / Plastic.... Set of 4 Black Balls / Plastic.. Set of 4 Green Balls / Plastic. Set of 4 White Balls / Plastic.. Set of 4 Stainless Balls.......... 4-Column Replacement Body 3/4" Blank Disc....................... 3/4" FPT Blank Cap............... Red Ball Repair Kit (16 Balls, 4 Gaskets, 2 Blank Discs)...... Orifice Cap - Before 1995...... Retaining Ring - Before 1995.

$ 13.94 12.60 12.73 4.02 16.88 8.38 7.71 7.71 7.71 6.39 13.53 50.25 1.01 1.07

RETAIL

1/4" Elbow Hose Barb $ 15.01 3/8" Elbow Hose Barb 10.25 1/2' Elbow Hose Barb 14.67 1/4" FPT Outlet Fitting for 3999 Series 6.97 O-Ring EPDM 3.73 Float Stop U-Pin Column, Single Cap, Plug 3/4" Elbow H.B., Inlet Clip Tee

2 1A

Ref. No.

5.48 14.67 20.90 11.86 23.79 6.70

1 3 5

Spray Monitor Mounting Brackets Use these mounting brackets to support your spray monitors above your planter/sprayer bar at easy viewing height. Constructed of laser cut steel with slotted holes for a variety of mounting heights; black powder coat finish. Small brackets hold up to 8 spray monitors; large brackets hold up to 16. Optional back plates are white and improve visibility at dawn, dusk and night time operation. Mounting u-bolts are not included.

18.76 0.60 0.60

Part No. DS 50-4 DS 50-2 DS 50-3 DS 50-5

Viton® is a registered trademark of DuPont Performance Elastomers

DULTMEIER SALES • OMAHA, NE

(800) 228-9666

•

www.dultmeier.com

Description RETAIL Small Mounting Bracket for 8 Monitors.......... $ 48.51 Small White Back Plate................................. 17.55 Large Mounting Bracket of 16 Monitors........ 109.21 Large White Back Plate................................. 26.53

• DAVENPORT, IA

(800) 553-6975

E0374

Planter Fertilizer Kits

255

Planter Fertilizer Kits Quick, Easy & Accurate Plumbing Kits for Applying Starter Fertilizer As You Plant! These Kits Include the Following Items Below:

HY 3350-44P: 3/4” Strainer, 50 Mesh

* 1/2” Hose from Strainer to Pump (not included)

12V Diaphragm 5 GPM Pump:

BU SMSS4-PE38 Spray Monitor Columns

* 1/2” Hose from Pump to Flow Monitor (not included)

* 1/2” Hose

from Tank to Strainer (not included)

TK PHB1212: 1/2” Hose Barb

TK PHB3412: 3/4” Hose Barb x 1/2” MNPT Fitting

8 Row Planter Fertilizer Kit (DU PLANT8) shown

TK PHB1212: 1/2” Hose Barb

All Packages also include: 100’ of 3/8” Black Tubing for 6 & 8 Row. 200’ of 3/8” Black Tubing for 12 Row.

Wire Harness

Cable Ties

Also See Totally Tubular Products on Adjacent Pages

Pump Speed Controller: Wire to Pump. Also run 3/8” Tubing from Controller to Flow Monitor for Pressure Reading (wire harness & tubing included).

(8) 3/8” Tubing from Flow Monitor to Each of the (8) Nozzle Bodies

SS QJ98590-3/8-2: John Guest Style Nozzle Bodies

* NOTE: 1/2” hose & orifice discs not included in kit.

SS QJ98586-NYR: John Guest Style Caps

Planter Fertilizer Kits

Part No. DU PLANT6 DU PLANT8 DU PLANT12 DU PLANT16

Teflon Tape

Description RETAIL 6 Row Planter Fertilizer Kit..... $ 1098.80 8 Row Planter Fertilizer Kit..... 1164.46 12 Row Planter Fertilizer Kit... 1340.00 16 Row Planter Fertilizer Kit... 1474.00

* Orifice discs not included, sold separately. Sized per application.

Planter Fertilizer Kits

BU FD0610 Flow Divider & (6) LM MC3814

All Packages also include:

For John Blue Ground Drive Pumps

(1/4” MPT x 3/8” Tube Fittings)

(8) 3/8” Tubing Runs

BUMFD4-PE38 Spray Monitor Columns

3/4” Hose from Pump to Flow Divider (6’ Included & Hose Barbs, Clamps)

Poly Reducing Bushings into Pump Discharge Port

SS 18999EPR: Gaskets Included

200’ of 3/8” Black Tubing

Ground Drive Pump (1-1/2” Ports: Pump not Included in Kit) 1-1/2” Hose from Tank to Strainer (8’ Included & 90˚ Hose Barb, Clamps)

1-1/2” Hose from Strainer to Pump (6’ Included & 90˚ Hose Barb, Clamps) HY 3350-116P: 1-1/2” Strainer, 50 Mesh

Also See Totally Tubular Products on Adjacent Pages

Cable Ties (100 Qty.)

(8) 3/8” Tubing from Flow Monitor to Each of the (8) Nozzle Bodies

* NOTE: 1/2” hose & orifice discs not included in kit.

8 Row Planter Fertilizer Kit for Ground Drive Pumps (DU PLANT8G) shown

Teflon Tape (1 Roll)

SS QJ98590-3/8-2: Nozzle Bodies

SS QJ98586-NYR: Caps

Planter Fertilizer Kits for Ground Drive Pumps

TK PHB112: 1-1/2” Hose Barb x 1-1/2” MNPT Fitting

Part No. DU PLANT6G DU PLANT8G DU PLANT12G DU PLANT16G

DULTMEIER SALES • OMAHA, NE

Description RETAIL 6 Row Planter Fertilizer Kit..... $ 1000.98 8 Row Planter Fertilizer Kit..... 1283.72 12 Row Planter Fertilizer Kit... 1429.78 16 Row Planter Fertilizer Kit... 2251.20

(800) 228-9666

•

www.dultmeier.com

Note: Do not use orifice discs if included Flow Divider is used.

• DAVENPORT, IA

(800) 553-6975

(8) SS 18999EPR (Only needed with orifice discs)

E0970

SafeGuard™ Monitors

256

SafeGuard™ Blockage Monitors SafeGuard™ electronically detects blockages and alerts you with an Audible Alarm and a Visual Display of the blocked row’s number. SafeGuard™ reduces over and under-application, saves money and applies liquid fertilizer with confidence without having to watch flow monitors or outlets.

FEATURES: • Instantly detects and alerts the operator of blockages without seeing the sensor - saves neck and back strain and eliminates the need for cameras. • Audible alarm immediately alerts operator of blockage. • Visual display immediately alerts operator of blockage. • Monitors all runs continuously. • Alerts operator regardless of lighting conditions. • Same performance Day or Night, Rain or Shine. • System is not affected by cloudy or dark liquids. • Achieve full benefits of liquid fertilizer application knowing all rows are applying. • Blockage notification for a wide variety of product applications, starter fertilizers, herbicides, insecticides, fungicides, fumigants, etc. Standard Outlet Fitting

SafeGuard™ Console Compact in-cab display that monitors, identifies and reacts with lightning speed to immediately alert you to a blockage. Easy-touse, on/off and volume adjustments are the only user controls. No calibration is required. After installation, simply turn on the console and it will detect how many rows are being monitored and their location (also checks for loose wires). SafeGuard™ brings real time blockage monitoring into the cab.

Durable Case Material Polyethylene Cartridge & Chamber Window Standard Viton O-Ring & Stainless U-Clip Connectivity

Installation Flexibility & Savings Opportunities

Also available with ISOBUS Option to display on an existing VT (Virtual Terminal) instead of standard console.

No limitations in mounting configurations. Mount the sensors to suit your needs since the rows are being monitored without the need to see them. Gang sensors together or mount them individually over the row.

Note: Sensor Inlet & Outlet Fittings Must Be Ordered Separately

Traditional Ganged Sensor Installation

Over the Row Installation

SafeGuard Console Console to Hitch Cable (in kit)

Adapter Cable (in kit) Extension Cable (not included)

SafeGuard Console

Console to Hitch Cable (in kit))

Note: (1) Extension Cable needed from hitch to outside sensor (not included)

SafeGuard Sensors (paired option)

SafeGuard Sensors (ganged together)

Adapter Cable (in kit)

SafeGuard Sensors

Each SafeGuard™ Blockage Monitor Kit includes console with mounting hardware, 10’ power cable and 15’ console to hitch cable. Blockage sensors are sold separately. Sensors are daisy chained together with wire leads. Implement Whisker Switch Kit allows for raising planter or bar at end of row without tripping SafeGuard™ Monitor (puts monitor in hold temporarily).

Part No. Description MT 01999 SafeGuard™ Console Kit............................................................................ MT 01994 Liquid Blockage Sensor with Short Leads for Ganged Installation........... Call MT 01995 Liquid Blockage Sensor with 20” Leads for Over the Row Installation.... for MT 01840 SafeGuard™ Implement Whisker Switch Kit for 2016 & Earlier............... Pricing MT 01998 SafeGuard™ Implement Whisker Switch Kit for 2017 & Later................. MT 18498 10’ Extension Cable.................................................................................... MT 18502 30’ Extension Cable.................................................................................... DULTMEIER SALES • OMAHA, NE (800) 228-9666 • www.dultmeier.com • DAVENPORT, IA (800) 553-6975 DULTMEIER SALES • OMAHA, NE

(800) 228-9666

•

www.dultmeier.com

• DAVENPORT, IA

(800) 553-6975

E1014

Nozzle Accessories Hi-Flow Turret Nozzle Bodies

Diaphragm Check Nozzle Bodies

for Wet or Dry Booms

Features: • Nylon Body • Available in 1/2" & 3/4" • Standard anti-drip valve (Red 8 PSI). • Optional anti-drip valve (4, 12 or 25 PSI). • EPDM diaphragm. • Maximum Temperature is 125° F. • Can be used with all quick-attach spray caps

Standard Equipment on Many Commercial Sprayers Features: • Three turret styles for an easy change of spray tips, single, 3-way & 5-way. • Available for 3/4” & 1” Wet or Dry Booms. • Positive shutoff between each spray position.

• Unique DCV (diaphragm check valve) design reduces restrictions in the flow path, enabling 2.6 GPM with a 5 PSI pressure drop through the nozzle.

Part No. TW 413412 TW 413413 TW 413422 TW 413423

• Can be used with all Quick Attach spray tips. Caps, Gaskets & tips not included.

• Automatic spray alignment using flat fan spray tips. • ProFlo nozzle bodies come standard with an 8 PSI Viton® check valve 4 PSI, 12 PSI, 20 PSI & 25 PSI check valves are available as options.

Description RETAIL 1/2" Single HB Check Valve...................... $ 6.77 3/4" Single HB Check Valve...................... 6.77 1/2" Double HB Check Valve.................... 6.77 3/4" Double HB Check Valve.................... 6.77 Less 5% on Std. Pkg. of 50

Hypro twin cap adapter, 152607TC, and TeeJet QJ90-2NYR “Y” adapter are made expressly for use with fungicide application for soybean rust.

Part No. RETAIL TW 9950-0014 3 Nozzle Turret for 3/4" Boom / Viton®........ $ 16.48 TW 9950-0015 3 Nozzle Turret for 1" Boom / Viton®........... 16.35 TW 9950-0017 5 Nozzle Turret for 1" Boom / Viton®........... 16.48 TW 9950-0018 5 Nozzle Turret for 1” Boom / Viton®............ 16.48

D D

QJ90-2NYR

The TeeJet “Y” adapter can be used with TJ60 TwinJets, XR TeeJets and TT Turbo TeeJets. The Hypro adapter can be used with ULD, TR, VP and TeeJet TT and XR. The Hypro cap will mate to the TeeJet QuickJet but will not accommodate the TJ60 a. Supplied less tips. Part No. Description RETAIL TW 152607TC Hypro Twin Cap with Gasket, Less Tips............ $ 6.19 SS QJ90-2NYR “Y” Adapter with Center Gasket, Less Caps..... 3.77

Dry Boom Adapters For dry booms use the 3/4" size and add 3/4" or 1" single or double hose connectors.

Nyglas Nozzle Adapters

Description RETAIL 3/4" Single Hose Connector...................... $ 1.62 3/4" Double Hose Connector.................... 1.62

PART A

PART B

Adapters available in 1/4", 3/8", 1/2" & 3/4" FPT

Couplers have 1/2" or 3/4" MPT

Description RETAIL EPDM Diaphragm..................................... $ 0.80 Viton® Diaphragm.................................... 2.43 EPDM Seal, 4 PSI Spring, Red/Orange... 3.63 EPDM Seal, 25 PSI Spring, Red/Blue...... 4.98 EPDM Seal, 8 PSI Spring, Red/Black...... 3.63 Retainer Cap Only.................................... 2.16

#50013

Poly Elbow

Polypropylene

Broadcast Adapter

Switch-A-Roo Couplings

for Floaters Using High Volume Deflect Style Tips

The 3/4" Fiber-Reinforced NY-GLASS Lever Couplers are ideal for mounting Spraying Systems KSS or Delavan Flooding Nozzles to sprayer booms. Max. Temperature is 140° F.

Part No. “NY-GLASS” RETAIL FC 025AN 1/4" FPT Adapter ................. $ 4.06 FC 037AN 3/8" FPT Adapter ................. 4.06 TK P050A 1/2" FPT Adapter ................. 4.85 FC 075AN 3/4" FPT Adapter ................. 3.63 FC 050BN 1/2" MPT Coupler ................ 9.31 FC 075BN 3/4" MPT Coupler ................ 8.98 BV 50013 3/4" Adpt x 3/4" FPT Elbow.... 7.24 10% DISCOUNT ON 100 ASSORTED ADAPTERS

Check Valve Replacement Parts Part No. TW 5860-36 TW 5865-36 TW 4020-3 TW 4020-5 TW 5860-130 TW 2000-30

Adapter Caps for Double Tip Application 152607TC

• Supports faster field speeds with the same coverage & supports direct fertilizer application through the nozzle body DCV flow path.

Part No. TW 426519 TW 427519

257

Cam Lever Coupling P050B or P075B

Existing Spray Nozzle D

- Use with Hypro HF Tips D

9950-0001 Broadcast Adapter

Male Switch-A-Roo Adapter

Broadcast Adapter Piece for floaters using high volume deflect style tips for fertilizer applications. Consists of 3/4” polypropylene adapter with elbow and QJ tip adapter. Sold in packages of 6.

Polypropylene Switch-A-Roo Couplings for quick nozzle changes. The female coupling has a self alignment groove. The male adapter is moulded with self alignment tab. Maximum Temperature is 140° F. Part No. TK P050B TK P075B TK 75A-1/4SA TK 75A-3/8SA TK 75A-1/2SA TK 75A-3/4SA

Hypro HF Tip is Not Included

Part No. TW 9950-0001 QJ Poly Adapter x Part A, Pkg of 6........

RETAIL $ 72.36

Description 1/2" MPT X Male Coupler with Groove 3/4" MPT X Male Coupler with Groove 1/4" FPT X Male Adapter with Tab...... 3/8" FPT X Male Adapter with Tab...... 1/2" FPT X Male Adapter with Tab...... 3/4" FPT X Male Adapter with Tab.....

RETAIL $ 10.92 9.18 4.72 3.90 3.90 3.90

Viton® is a registered trademark of DuPont Performance Elastomers

DULTMEIER SALES • OMAHA, NE

(800) 228-9666

•

www.dultmeier.com

• DAVENPORT, IA

(800) 553-6975

E0611

Nozzle Body Systems

258

“Combo-Rate II” Nozzle Body Systems

Combo-Rate II Nozzle Body Systems are designed with the main saddle/nozzle body positioned directly under the boom. This keeps the complete assembly compact, even when the second nozzle body or turret is added. Constructed of glass-filled polypropylene for strength and excellent corrosion-resistance. All components are easily connected with the stainless u-clips. Standard with buna o-rings (Viton® available; enter -V0 suffix instead of -00) and EPDM internal diaphragm. Standard with 10 PSI diaphragm check valves. Fits 1” I.D. standard boom pipes.

WL 20460-04 U-Clip

WL 41100-02 Body Nut D

WL 41434-00 Combo Rate II Saddle/Body 2 Way, 3/8” Inlet. Includes Manual Shutoff Valve (MSO)

WL 40203-00 Adapter for TeeJet QuickJet Cap

Part No.

WL 41333-00 WL 41434-00 WL 41438-00 WL 41364-00 WL 41513-00 WL 41514-00 WL 41515-00 WL 41502-11 WL 40203-00 WL 41285-00 WL 20460-04 WL 41100-03 WL 41100-V3 WL 41100-12 WL 41100-P15 WL 41100-02 WL 40155-07 WL 40155-12

Shown here completely assembled with 5-Way Turret & Plug

WL 41100-03 Diaphragm Check Valve

WL 41285-00 Male Plug

WL 41515-00 5-Way Turret Description

Combo-Rate Saddle/Body, 1 Way, 3/8” Inlet with Manual Shutoff Valve............................... Combo-Rate Saddle/Body, 2 Way, 3/8” Inlet with Manual Shutoff Valve *............................. Combo-Rate Saddle/Body, 2 Way, 3/8” Inlet for Blended Pulse Applications....................... Combo-Rate Saddle/Body, 2 Way, 21/32” Inlet for JD Sprayers with Manual Shutoff Valve. Combo-Rate, 3 Way Turret with Manual Shutoff Valve.......................................................... Combo-Rate, 4 Way Turret with Manual Shutoff Valve.......................................................... Combo-Rate, 5 Way Turret with Manual Shutoff Valve.......................................................... Combo-Rate, Viton® Repair Kit - to Repair 2,3,4 & 5 Way Turrets....................................... Combo-Rate, Adapter for TeeJet “Quick Jet” Cap................................................................. Combo-Rate, Male Plug Less U-Clip.................................................................................... Combo-Rate, Stainless Steel U-Clip..................................................................................... Combo-Rate, 10 PSI Diaphragm Check Valve (Less Body Nut & Diaphragm) .................... Combo-Rate, 10 PSI Diaphragm Check Valve (Less Body Nut & Diaphragm)..................... Combo-Rate, 4 PSI Diaphragm Check Valve (Less Body Nut & Diaphragm) ...................... Combo-Rate, 15 PSI Diaphragm Check Valve (Less Body Nut & Diaphragm) .................... Combo-Rate, Body Nut for Above Check Valves.................................................................. Combo-Rate, FKM Diaphragm for Above Check Valves....................................................... Combo-Rate, Viton® Diaphragm for Above Check Valves....................................................

RETAIL

$ 12.19 12.86 8.31 13.27 15.81 15.68 15.01 17.55 2.01 1.34 1.47 2.41 3.62 2.28 2.28 1.21 0.80 2.68

* 41434-00 is Direct Replacement for 41334-001 (New & Improved Design).

“Combo-Rate” Nozzle Body Systems Combo-Rate Nozzle Body Systems allow you to spray with multiple nozzles (of the same or different sizes) at the same location on the boom, to optimize coverage, canopy penetration and drift control. This allows flow rates and droplet sizes of multiple nozzles to be combined. Unlike conventional nozzle bodies, Combo-Rate nozzle bodies are modular. Constructed of durable glass-filled polypropylene, stainless u-clips and FKM o-rings (Viton® available). 10 PSI diaphragm check valves with EPDM are standard (4 PSI Viton® diaphragms are also available).

D D

WL 41376-00 2-Way Saddle

Part No.

WL 41376-00 WL 41375-00 WL 41110-00 WL 41111-00 WL 41120-00 WL 41121-00 WL 41125-00 WL 41126-00

WL 41375-00 1-Way Saddle

WL 41110-00 2-Way Nozzle Body with Manual Shutoff Valve

WL 41111-00 1-Way Nozzle Body with Manual Shutoff Valve

Description

Combo-Rate Saddle, 2 Way for 1” Pipe, 3/8” Inlet......................... Combo-Rate Saddle, 1 Way for 1” Pipe, 3/8” Inlet......................... Combo-Rate Nozzle Body, 2 Way with Manual Shutoff Valve........ Combo-Rate Nozzle Body, 1 Way with Manual Shutoff Valve........ Combo-Rate Nozzle Body, 2 Way, Air-On Control......................... Combo-Rate Nozzle Body, 1 Way, Air-On Control......................... Combo-Rate 2 Way, Air Off Control............................................... Combo-Rate 1 Way, Air Off Control...............................................

DULTMEIER SALES • OMAHA, NE

(800) 228-9666

•

RETAIL

$ 6.43 5.09 8.44 7.77 12.06 11.26 10.85 10.18

www.dultmeier.com

WL 41120-00 2-Way, Air On Control Nozzle Body and WL 41125-00 Air Off

WL 41121-00 1-Way, Air On Control Nozzle Body WL 41126-00 Air Off

Viton® is a registered trademark of DuPont Performance Elastomers

• DAVENPORT, IA

(800) 553-6975

E1043

Combo-Jet® & Combo-Rate® Accessories

259

Combo-Rate® Manifold Control/Regulating Components & Combo-Jet® Accessories & ORS Manifolds/Accessories Combo-Rate® Manifolds Can Be Use to Control and Distribute Liquid in a Wide Range of Applications WL 20561-00

Quick-Nut™ SST Fittings

WL 20551-00 WL 20517

WL 20529-00

WL 41402-V0

WL 25176-V0

WL 25137-VO

Boom End Flush Valve Case IH Thin Wall

Boom End Flush Valve

Adapter

WL 20513-00 D

WL 20521-00

WL 20574-00 Assembly Options

ORS (O-Ring Sealed) Manifold & Check Valves

WL 25175-10

WL 20460-03

Boom End Dust Cap

FKM O-Ring

WL 40204

WL 41110-01

Adapter Square Lug

Manual Check Valve

The Wilger ORS Manifold makes it even easier and more cost effective to setup and distribute liquids.

WL 25175-13 Long Handle for Boom End Flush Valve

See Additional Combo-Jet® Fittings Below

& Combo-Rate® Accessories • “Bank Your Own” • Very Compact • Isolation Tees Not Required WL 20480

WL 40436-B5

WL 20512

WL 20519

WL 20523

WL 20525

Elbow

1/4” FPT Fitting

Isolation Tee (Blank Tee)

1” FPT Clip Tee

Combo-Jet®

Spray Monitor

Jet Cap x Tube Adapter

RETAIL $ 3.35 6.03 6.70 4.15 4.15 4.15 2.68 2.68 2.68 2.68 2.68 2.68 2.68 2.68 13.27 10.72 1.74 0.27 1.47 3.35 2.68

ORS Check Valves & Manifolds Part No. RETAIL WL 20551-00 ORS Check Valve, Manual, 10 PSI, FKM .... $ 8.04 WL 20550-00 ORS Check Valve, 10 PSI, FKM................... 6.70 WL 20561-00 ORS Check Valve to Combo-Jet, 10 PSI, FKM. 6.57 WL 20560-00 ORS Check Valve to Combo-Jet, 10 PSI, FKM. 5.63 WL 20572-00 ORS Manifold, FKM, 2 Outlet............................. 8.17 WL 20573-00 ORS Manifold, FKM, 3 Outlet............................. 9.51 WL 20574-00 ORS Manifold, FKM, 4 Outlet............................. 11.52

ORS Top Outlet Fitting Options Part No. RETAIL WL 20516 1/4” Tube Adapter (Push In, 90° Elbow) ...................................... $ 4.82 WL 20528 5/16” Tube Adapter (Push In, 90° Elbow) .................................... 5.36 WL 20517 3/8” Tube Adapter (Push In, 90° Elbow)....................................... 5.36 WL 20511 3/8” Hose Barb, 90° Elbow........................................................... 2.68

Quick Nut SST Fluid Supply System Fittings Quick-Nut® Boom End Flush Valves & Adapters Part No. RETAIL WL 25176-V0 Boom End Flush Valve with Adapter, 1” Viton® ...................................................... $ 25.86 WL 25137-VO Adapter w/ O-Ring QN BEFV to 1” NPTF, Viton® 4.69 WL 25175-10 Boom End Flush Valve Dust Cap.................. 1.47 WL 25175-13 Boom End Flush Valve, Long Handle............ 2.28 WL 25160-02 FKM O-Ring for Boom End Flush Valve........ 0.54

Combo-Jet® & Combo-Rate® Accessories Part No. RETAIL WL 40204 Adapter Square to Combo-Jet, Buna ....................................... $ 2.01 WL 41110-01 Manual On/Off Check Valve, 10 PSI, Black .............................. 3.62 WL 20460-04 Combo-Rate Stainless Steel U-Clip.......................................... 1.47 WL 41285-00 Combo-Rate Male Plug Less U-Clip......................................... 1.34 WL 41100-03 Combo-Rate, 10 PSI Diaphragm Check Valve (Less Body Nut & Diaph.) Black 2.41 WL 41100-V3 Combo-Rate, 10 PSI Diaphragm Check Valve With Viton® Diaphragm, Less Body Nut, Black...................................................... 3.62 WL 41100-12 Combo-Rate, 4 PSI Diaphragm Check Valve (Less Body Nut & Diaphragm) Blue 2.28 WL 41100-P15 Combo-Rate, 15 PSI Diaphragm Check Valve (Less Body Nut & Diaphragm) Red 2.28 WL 40155-23 Combo-Rate, Replacement Diaphragm, FKM....................................................... 0.94 WL 40155-07 Combo-Rate, Replacement Diaphragm, EPDM.................................................... 0.80 WL 40155-12 Combo-Rate, Replacement Diaphragm, Viton®................................................... 2.68

CASE Thin Wall (TWS) Boom End Flush Valve & Adapter Part No. RETAIL WL 41402-V0 Boom End Flush Valve - Used on CASE IH Thin-Walled SS (TWS) Booms. Fits 1.35” O.D. Shorter thread than QNSST Valve........ $ 21.98 WL 41403 Male TWS Adapter x FPT............................. 2.68 WL 25160-02 FKM O-Ring for Boom End Flush Valve........ 0.54

Viton® is a registered trademark of DuPont Performance Elastomers

DULTMEIER SALES • OMAHA, NE

(800) 228-9666

•

www.dultmeier.com

• DAVENPORT, IA

(800) 553-6975

E1192

Boom Fittings • Air Eliminators

260

2410 Express Boom Assembly 1” Schedule 5 Stainless Steel Pipe

Hypro’s 2410 Express Boom Assembly allows you to customize each boom section by choosing the quantity of nozzle bodies either left or right of the tee for each section. Express Boom Assembly has the flexibility to meet any boom design. These single section custom configurations can range from one nozzle body on the left and/or right branch, to five nozzle bodies on each branch. Review the chart below for all configuration options.

UF Clamp & Gasket Included

15” or 20” Nozzle Spacing

Performance Tested to 150 PSI Rating

5-Way ProFlo Nozzle Bodies with EPDM 8 PSI DCV

Equipped with Express Fittings

Features: • Standard Configuration 1” Sch 5 SS Pipe. 20” Spacing. Express Fittings, 5-way ProFlo Nozzle with EPDM 8 PSI DCV.

Quick Shutoff & Easy Cleanout with Express End Cap

• Simplifies Manufacturing Process, Assembly Time and Product Numbers. • Performance Tested to 150 PSI Rating. • A Complete Assembly to Eliminate Any Assembly Defects.

Look For This Express Boom Assembly on Our Website: www. dultmeier.com for the PDF on Configurations & Pricing !

Express Boom Fittings Eliminates the Shut-Off Lag Time Developed to eliminate the shut-off lag time that can result in 70 ft. of overspray. The Express End Cap allows the compressed air trapped in the boom to bleed out, resulting in a much faster managed shut-off. You can easily retrofit 1” stainless, aluminum and poly pipe booms.

7433-2610 1” Express Fitting x 1” HB Elbow

D D

7433-2503 1” Express Fitting x 1” Flange

7433-33140 1” High Flow Express End Cap with Plug for JD 7433-3316 Standard Flow End Cap Assembly

7433-2514 Cleanout Plug, O-ring & Retainer Kit

7433-3319 Flush Valve for End Cap

7433-2613 1” Express Fitting x 1” Male Cam Lock Straight

7433-2608 1” Express Fitting x 1” HB Straight

Air Eliminators for Wet Booms

Boom Section Pipe

TeeJet’s Air Eliminators for Wet Booms Part No. Description RETAIL SS CP98583-2-1 Rapid Stop for QJ17560A on 1” Booms..................... $ 7.44 SS CP98583-2-3/4 Rapid Stop for QJ17560A on 3/4” Booms.................. 7.44 SS CP98583-3-1 Rapid Stop for QJ360/370/380 & QJS on 1” Booms.. 7.44 SS CP98583-3-3/4 Rapid Stop for QJ360/370/380 & QJS on 3/4” Booms 7.37

DULTMEIER SALES • OMAHA, NE

(800) 228-9666

•

3430-0790 Clamp & Hardware Kit

Part No. Description HY 7433-33140 1” High Flow Express End Cap with Plug............. HY 7433-3316 1” Standard Flow Express End Cap with Plug...... HY 7433-3319 Flush Valve for End Cap........................................ HY 7433-3321 Flush Valve With Express End Cap Installed.......... HY 7433-2502 1” Express Fitting x 1” Straight Flange.................. HY 7433-2503 1” Express Fitting x 1” Flange (2 Pieces).............. HY 7433-2608 1” Express Fitting x 1” HB Straight....................... HY 7433-2610 1” Express Fitting x 1” HB Elbow.......................... HY 7433-2613 1” Express Fitting x 1” Male Camlock................... HY UFG0100E 1” EPDM Gasket................................................... HY 3410-0044 Retrofit Kit for 1” Standard Flow End Cap............. HY 3410-0043 Retrofit Kit for 1” High Flow End Cap.................... HY 3430-0790 Clamp & Hardware Kit with Pipe O-rings.............. HY 7433-2514 Cleanout Plug, O-ring & Retainer Kit.....................

3410-0043 & 3410-0044 Retrofit Kits

7433-2502 1” Express Fitting x 1” Straight Flange

www.dultmeier.com

RETAIL $ 45.16 45.16 45.56 67.67 24.66 41.41 24.66 24.66 24.66 1.07 168.51 168.51 15.68 16.75

Rapid Stop Inlet Adapter

Extended height aids in removal of air trapped in the spray boom - shortens tip shutoff/on time. Stainless material. Easily installed.

• DAVENPORT, IA

(800) 553-6975

E1033

Spraying Systems Quick Triple Nozzle Assemblies

Turret Nozzles With Fertilizer Outlet

Quick TeeJet Triple Nozzle Body for Quick TeeJet Caps

Provides three spray positions for easy change of spray tips. Includes diaphragm shut-off. With 1/4 FPT connection. Standard EPDM diaphragm. Standard check pressure is 10 PSI (2,5,8,15 & 20 available). Designed for use with the Vari-Spacing Clamp. 24231 is for 1/2” & 3/4" hose barb sizes. 24216 is for 3/4" or 1" Pipe. Pressures to 125 PSI. Maximum Temperature is 125° F.

The QJ363F Turret Nozzle employs a single fixed large volume bottom outlet for fertilizer application.The 3/4/5 turret outlets will deliver 2.25 gpm at a 5 psi drop. Viton® internals. Opening pressure is 10 psi and maximum pressure is 300 psi. Illustrated for a 1" pipe wet boom. For dry booms, select the single or double connectors listed below. CP98488-VI John Deere Retrofit Seal

24216 24231-NYB

Double Hose Shank 1/4" FPT

Single Hose Shank 1/4" FPT

18646 18725

18645

Part No. RETAIL SS 24216-1/2NYB TeeJet Triple Nozzle Body - 1/2".............. $ 17.76 SS 24216-3/4NY TeeJet Triple Nozzle Body - 3/4".............. 17.82 SS 24216-1NYB TeeJet Triple Nozzle Body - 1"................. 17.82 SS 24231NYB TeeJet Triple Nozzle Body with 1/4" Inlet. 18.76 SS 18645-1/2 Single Hose Shank - 1/2" Hose............... 3.23 SS 18724-3/4 Single Hose Shank - 3/4' Hose................ 3.23 SS 18646-1/2 Double Hose Shank - 1/2" Hose............... 3.23 SS 18725-3/4 Double Hose Shank - 3/4" Hose............... 3.23 Note: 21950-2,5,8,15,20NYB End Caps Available.

• 1/4" NPT male inlet connection.11/16” MPT Outlet D

- QJ39685 Series Features: Made of black nylon material • 300 PSI maximum • Viton ® Diaphragm is standard • Standard drip-free check pressure is 10 PSI (2, 5, 8, 15 & 20 PSI available) • Maximum Temperature is 125° F. • Used with Quick TeeJet Caps • Hose Shank Available as Single (Left or Right) or Double for 1/2" I.D. Hose • Made of Corrosion Resistant Materials • Drip Free Positive Shut-Off

• Nylon with stainless steel diaphragm spring

8360NYB

For use with standard round and square boom clamps with all styles of QuickJet Caps. Available in right or left Single L or Double T for 1/2" hose.

13431NY Long Shank Nozzle Body shown with Cap No. 8476NY

8360NYB & 13431NY Nylon Diaphragm Nozzle Bodies are supplied less the Nozzle, Cap & Strainers. For rates up to 1-1/2 GPM. The springbacked diaphragm valve provides positive closure when pressure is shut off. The 13431NY Nozzle has a longer threaded shank for use with Vari-Spacing type clamps. 10 PSI check valve is standard (2, 5, 8, 15 & 20 PSI also available). Maximum temperature is 125° F. Part No. RETAIL SS 8360NYB Check Valve with Viton® Diaphragm.... $ 14.94 SS 13431NY Long Shank Diaphragm Nozzle........... 14.67 SS 4676NY-1/4 Nylon Adaptor Caps, 11/16” x 1/4” FPT 2.02 SS 21950-10NYB *10 PSI End Cap Assembly - Less Diaphragm 1.49 SS 21953VI Raised Viton® Diaphragm After 1988.. 1.49 SS CP21953-EPR EPDM Diaphragm................................ 0.54 *Note: 21950-2,5,8,15,20NYB End Caps Available.

Nozzle Assemblies

• Maximum Operating Pressure is 300 PSI QJ39685-1L500 Single Left

Fertilizer outlet with blank shutoff cap & gasket

Diaphragm Nozzles

Diaphragm Check Valve Assemblies

Bottom Outlet Max. Part No. GPM @ 5 PSI Drop PSI Connections RETAIL SS QJ363F-1NYBVI 3.4 300 3 & 1 Outlets $ 20.23 SS QJ383F-1NYBVI * 4.7 150 3 Outlets 28.81 SS QJ364F-1NYBVI 3.2 300 4 & 1 Outlets 20.37 SS QJ365F-1NYBVI 3.2 300 5 & 1 Outlets 20.23 SS CP50104NYB 1" Single Connector....................................... 2.29 SS CP50114NYB 1" Double Connector .................................... 2.71 SS CP98488-VI JOHN DEERE Retrofit Seal - Adapts to Any QJ TeeJet Wet Boom with 3/8” Inlet to Larger 11/16” Hole on John Deere Wet Boom 6.32 * High Flow

261

SYSTEM

QJ7421-NYB Series

TYPE QJ7421-NYB

QJ39685-1R500 Single Right

• Can be mounted to 1/2”, 3/4” or 1” pipe or equivalent size tubing. • Mounts to a 3/8” (9.5mm) hole drilled in pipe or tubing. • Maximum operating pressure is 300 PSI. Part No. To Clamp On RETAIL SS QJ7421-1/2NYB * 1/2” Pipe $ 3.50 SS QJ7421-3/4NYB * 3/4” Pipe 3.50 SS QJ7421-1NYB 1” Pipe 3.50 * 1/2” & 3/4” sizes include a mounting hole in the upper clamp subassembly for mounting to flat surfaces.

QJ39685-2500 Double Hose

QJ7421-NYB

Blank Split Eyelet

Part No. RETAIL SS QJ39685-1R500 Single Right Check Valve ........... $ 6.59 SS QJ39685-1L500 Single Left Check Valve ............. 6.59 SS QJ39685-2500 Double Hose Check Valve .......... 6.59 SS 21953VI Viton® Diaphragm ....................... 1.49 SS CP21953-EPR EPDM Diaphragm........................ 0.54 Note: 21950-2,5,8,15,20NYB End Caps Available.

For 1" Wet Booms

• Used On Booms that Include Multiple Nozzle Spacing Positions. • Viton® O-Rings - 300 PSI

Part No. RETAIL SS QJS-P0-1 Blank Split Eyelet for 1” Wet Booms ........... $ 3.63

Viton® is a registered trademark of DuPont Performance Elastomers

DULTMEIER SALES • OMAHA, NE

(800) 228-9666

•

www.dultmeier.com

• DAVENPORT, IA

(800) 553-6975

E0359

Nozzle Bodies • Nozzle Body Turrets

262

“Jumbo” High Volume 5-Way Nozzle Turrets

QJ370 Nozzle Body Turrets High Flow Rates In A Compact Design

For John Deere Sprayers with 1” Booms with 11/16” Diameter Boom Holes These High Volume 5-Way Nozzle Turrets are designed as direct replacements for John Deere Sprayers with 1” Booms with 11/16” diameter boom holes. Easy Fit Connection for 1” pipe; includes stainless screw and nut. Standard with Viton® diaphragms. High volume - 6 GPM at 5 PSI pressure drop. Check valve closes at 12 PSI. 5 Nozzle lugs fit QuickJet 90° turn caps. Rated to 145 PSI. Part No. AG 51 AG 51-V AG 51-CV

Viton® Wet Boom Style

Dry Boom Style

Description RETAIL Jumbo 5-Way Nozzle Turret for 1” Boom........ $ 39.80 Replacement Viton® Diaphragm for Above.... 3.63 Replacement 12 PSI Check Valve for Above. 3.83

• Compact high flow nozzle body with choice of 3 or 5 Outlets & 1/2”, 3/4” or 1”. • Positive indexing and shut-off between each spray position. • Flow rate for three outlet: 2.6 GPM @ 5 PSI; 3.6 GPM @ 10 PSI.

QJS Stackable Nozzle Bodies for Wet & Dry Booms

• Flow rate for five outlet: 2.4 GPM @ 5 PSI; 3.4 GPM @ 10 PSI. • Available with 1/2”, 3/4” & 1” single or double hose barb. • 10 PSI diaphragm check standard. • Viton® o-rings and diaphragm. • Hinged upper clamp & stainless steel bolt with captured nut reduces installation time. • Automatic spray tip alignment for use with Quick Teejet® caps. • Notched inlet tube reduces sediment buildup. • Mounts to 3/8” hole in pipe (Wet Boom Style). • Body features mounting lugs for use with Teejet® Vari-Spacing clamps for attaching to dry boom sprayers. • Maximum pressure of 300 PSI. Wet Boom Versions:

• Multiple outlet, stackable nozzle body is ideal for both pull-type and selfpropelled sprayers.

Part No. SS QJ373-1/2NYB SS QJ373-3/4NYB SS QJ373-1NYB SS QJ375-1/2NYB SS QJ375-3/4NYB SS QJ375-1NYB

• Wet boom configuration offered with choice of bottom or side inlet in five different boom diameters; dry boom versions also available in three sizes.

Dry Boom Versions (Hose Barbs Included):

QJS Shown with Optional ChemSaver®

Part No. SS QJ373-500-1NYB SS QJ373-500-2NYB SS QJ373-750-1NYB SS QJ373-750-2NYB SS QJ373-1000-1NYB SS QJ373-1000-2NYB

• Can be equipped with any combination of TeeJet ChemSaver® tip shutoffs including: pneumatic, electric, manual or spring-loaded check valve. • Choose from one to three outlets in an in-line configuration or up to four outlets in a parallel (tee) configuration. • Maximum operating pressure of 300 PSI.

Description RETAIL 3 Outlet QuickJet Nozzle Body for 1/2” Pipe............... $ 11.99 3 Outlet QuickJet Nozzle Body for 3/4” Pipe............... 11.86 3 Outlet QuickJet Nozzle Body for 1” Pipe.................. 11.86 5 Outlet QuickJet Nozzle Body for 1/2” Pipe............... 11.99 5 Outlet QuickJet Nozzle Body for 3/4” Pipe............... 11.99 5 Outlet QuickJet Nozzle Body for 1” Pipe.................. 11.99

Description RETAIL 3 Outlet QuickJet Nozzle Body with 1/2” Single HB.... $ 15.01 3 Outlet QuickJet Nozzle Body with 1/2” Double HB.. 15.01 3 Outlet QuickJet Nozzle Body with 3/4” Single HB.... 15.01 3 Outlet QuickJet Nozzle Body with 3/4” Double HB.. 15.01 3 Outlet QuickJet Nozzle Body with 1” Single HB....... 15.01 3 Outlet QuickJet Nozzle Body with 1” Double HB..... 15.01

Note: For 5 Outlet Versions, Order SS QJ375-XXX-1 (or 2) NYB.

• Flow rating of 2.75 GPM at 5 PSI pressure drop and 4.0 GPM at 10 PSI pressure drop. • Wetted parts are nylon and Viton®.

To Deliver the Best

• Many Variations Available - CALL

Possible Service to Our Customers,

CALL US FOR DETAILS !

Dultmeier Sales Strives to Live Up to A Set of Core Values, One of Which is to “Drive Change”

Proactively improve processes and procedures

Viton® is a registered trademark of DuPont Performance Elastomers

DULTMEIER SALES • OMAHA, NE

(800) 228-9666

•

www.dultmeier.com

• DAVENPORT, IA

(800) 553-6975

E1116

Quick

Diaphragm Check Valves

Nozzle Assemblies

– Top Style –

Less Caps

Available in 3, 4 or 5 nozzle style with QJ363 Viton® diaphragm. Pressures to 300 psi, opens at 10 psi. 2.25 GPM @ 5 PSI and 3.20 GPM at 10 PSI. Maximum Temperature is 125° F. D For wet pipe booms use either 3/4" CP38936NYB or 1". For dry booms always use the CP38938NYB 3/4NYB version and add the 1/2", CP38940NYB 3/4" or 1" single or double hose connectors.For dry boom mounting use QJ Round or Square VariD Spacing clamps on adjacent page. CP38937NYB Standard Check Pressure is 10 PSI. CP38939NYB (2, 5, 8, 15 & 20 PSI also available) CP38941NYB

QJ365

Part No. RETAIL SS 22251-3/8 Single Shank Check Valve, 3/8" Hose.................... $ 7.97 SS 22251-1/2 Single Shank Check Valve, 1/2" Hose.................... 7.97 SS 22251-3/4 Single Shank Check Valve, 3/4" Hose.................... 7.97 SS 22252-3/8 Double Shank Check Valve, 3/8" Hose................... 7.91 SS 22252-1/2 Double Shank Check Valve, 1/2" Hose................... 7.91 SS 22252-3/4 Double Shank Check Valve, 3/4" Hose................... 7.91 SS 21953VI Diaphragm (Viton®) for Check Valve...................... 1.49 SS CP21953-EPR Diaphragm (EPDM) for Check Valve....................... 0.54 SS 58140 Manual Nozzle Shut-Off.......................................... 5.25 Note: 21950-2,5,8,15,20NYB End Caps Available.

Check Valves 19351 Triple Check Valve

• Standard Check Pressure is 10 PSI. (2, 5, 8, 15 & 20 PSI also available) • Viton® Diaphragm • 300 PSI Maximum Pressure • Max Temperature is 125° F. • #8360 Flow Rate is 2.25 GPM @ 5 PSI Drop QJT8360NYB Check Valve Adapter 11/16/16F x QuickJet

RETAIL $ 5.59 5.25 8.24 1.49 0.54 1.61 5.25

Split Eyelets

Hose Shank Bodies

- 125 PSI D

18635-3/8 18638-1/2 18719-3/4 Single Hose Shank Body-1/2 or 3/4" Barb Part No. SS 18635-3/8 SS 18638-1/2 SS 18719-3/4 SS 18636-3/8 SS 18639-1/2 SS 18720-3/4 SS 18637-3/8 SS 18640-1/2 SS 18721-3/4

Part No. RETAIL SS 19349-3/8 Single Shank Check Valve, 3/8" Hose.................... $ 9.38 SS 19349-1/2 Single Shank Check Valve, 1/2" Hose.................... 9.38 SS 19349-3/4 Single Shank Check Valve, 3/4" Hose.................... 9.38 SS 19350-3/8 Double Shank Check Valve, 3/8" Hose................... 9.38 SS 19350-1/2 Double Shank Check Valve, 1/2" Hose................... 9.38 SS 19350-3/4 Double Shank Check Valve, 3/4" Hose................... 9.38 SS 19351-3/8 Triple Shank Check Valve, 3/8" Hose...................... 9.38 SS 19351-1/2 Triple Shank Check Valve, 1/2" Hose...................... 9.38 SS 19351-3/4 Triple Shank Check Valve, 3/4" Hose ..................... 9.18 SS 21953VI Diaphragm (Viton®) for Check Valve...................... 1.49 SS CP21953-EPR Diaphragm (EPDM) for Check Valve....................... 0.54 SS 58140 Manual Nozzle Shut-Off.......................................... 5.25 Note: 21950-2,5,8,15,20NYB End Caps Available.

4241N-B121S Diaphragm Check Valve

Part No. SS QJ8360NYB Diaphragm Check Valve with 1/4" MPT Inlet. SS QJT8360NYB Diaphragm Check Valve with 11/16"-16 Inlet TW 4241N-B121S Diaphragm Check Valve with 3/8” HB Inlet... SS 21953VI Diaphragm (Viton®) for Check Valve............ SS CP21953-EPR Diaphragm (EPDM) for Check Valve.............. SS 19191EPR Gasket for QJT as extra.................................. SS 58140 Manual Nozzle Shut-Off................................. Note: 21950-2,5,8,15,20NYB End Caps Available.

Maximum Temperature is 125° F.

QJ17560

• Viton® Diaphragm QJ22187

• 300 PSI Maximum Pressure

18637-3/8 18640-1/2 18721-3/4 Triple Hose Shank Body-1/2 or 3/4" Barbs RETAIL Single Shank Body, 3/8", Hose.......... $ 3.47 Single Shank Body, 1/2", Hose.......... 3.36 Single Shank Body, 3/4", Hose.......... 3.50 Double Shank Body, 3/8", Hose......... 3.36 Double Shank Body, 1/2", Hose......... 3.36 Double Shank Body, 3/4", Hose......... 3.50 Triple Shank Body, 3/8", Hose........... 3.50 Triple Shank Body, 1/2", Hose........... 3.36 Triple Shank Body, 3/4", Hose........... 3.50

18636-3/8 18639-1/2 18720-3/4 Double Hose Shank Body-1/2 or 3/4" Barbs

(800) 228-9666

– Side Style & Top Style – • Standard Check Pressure is 10 PSI. 2, 5, 8, 15 & 20 PSI are also available

DULTMEIER SALES • OMAHA, NE

• Standard Check Pressure is 10 PSI. (2, 5, 8, 15 & 20 PSI also available) • Viton® Diaphragm • 125 PSI Maximum Pressure • Maximum Temperature is 125° F.

QJ8360NYB Diaphragm Check Valve

19349 Single Check Valve

Shown with QuickJet Cap & NozzleHas 1/4" MPT

– Side Style –

19350 Double Check Valve

Diaphragm Check Valves – Side Style –

22252 Diaphragm Check

22251 Diaphragm Check

Part No. Size RETAIL SS QJ363-34NYBVI * 3/4" 3-Nozzle Assembly, Viton®, Less connector... $ 15.54 SS QJ363-1NYBVI 1" 3-Nozzle Assembly, Viton®, Less connector... 15.54 SS QJ364-34NYBVI * 3/4" 4-Nozzle Assembly, Viton®, Less connector... 15.61 SS QJ364-1NYBVI 1" 4-Nozzle Assembly, Viton®, Less connector... 15.54 SS QJ365-34NYBVI * 3/4" 5-Nozzle Assembly, Viton®, Less connector... 15.41 SS QJ365-1NYBVI 1" 5-Nozzle Assembly, Viton®, Less connector .. 15.54 SS CP38936NYB 1/2" Single Hose Connector .......................... 1.89 SS CP38938NYB 3/4" Single Hose Connector................................... 1.89 SS CP38940NYB 1" Single Hose Connector................................... 2.02 SS CP38937NYB * 1/2" Double Hose Connector ......................... 2.43 SS CP38939NYB 3/4" Double Hose Connector.................................. 2.43 SS CP38941NYB 1" Double Hose Connector.................................. 2.43 SS 21953VI - Viton® Diaphragm ......................................... 1.49 SS CP21953-EPR - EPDM Diaphragm ........................................... 0.54 SS 58140 Manual Nozzle Shut-Off............................................... 5.25 * Use on Hose Fed Dry Booms & Add Connections.

IND

Low profile design allows maximum protection against damage. Drip-Free shutoff. Opens at 10 PSI. Standard Viton® diaphragm. Pressure to 125 PSI. Standard check pressure is 10 PSI. (2, 5, 8, 15 & 20 PSI also available). 3.5 GPM @ 5 PSI. Maximum Temperature is 125° F.

QJ360 Nozzle Assemblies for Wet or Dry Booms

QJ364

263

SYSTEM

•

• Requires 3/8" Hole in Pipe • Caps, Nozzles, Gaskets Not Included (See other pages).

CP25609 Cap

Part No. RETAIL SS QJ17560-1/2 Split-Eyelet Check Valve for 1/2" Pipe................... $ 4.58 SS QJ17560-3/4 Split-Eyelet Check Valve for 3/4” Pipe................... 4.58 SS QJ17560-1 Split-Eyelet Check Valve for 1" Pipe...................... 4.58 SS QJ22187-3/4 Split-Eyelet Check Valve for 3/4" Pipe .................. 9.78 SS QJ22187-1 Split-Eyelet Check Valve for 1" Pipe...................... 9.78 SS 21953VI Diaphragm (Viton®)................................................. 1.49 SS CP21953-EPR Diaphragm (EPDM)................................................. 0.54 SS CP25611 QuickJet Cap for 01-08 Orifices, Less Gasket ........ 0.67 SS CP25609 QuickJet Cap for 10-20 Orifices, Less Gasket ........ 0.80

Note: 21950-2,5,8,15,20NYB End Caps Available. Viton® is a registered trademark of DuPont Performance Elastomers

www.dultmeier.com

• DAVENPORT, IA

(800) 553-6975

E0358

Quick

264 Nylon Swivels

SYSTEM

John Guest Push to Connect Caps & Bodies

Both the QJ cap and check body incorporate John Guest end connections for use with 1/4” or 3/8” tube. This is a modified QJ8360NYB. EPDM o-ring in the John Guest insert. Mounting slots will accept 10-24 screws or can be cable tied.Overall length of the cap/body assembly is 3-1/2”.

Maximum Temperature is 125° F.

QJ8600-1/4NYB Nylon Single Swivel 1/4" FPT x QuickJet

QJ8600-2 Nylon Double Swivel 1/4" FPT x QuickJet

Part No. RETAIL SS QJ8600-1/4NYB Single Swivel with 1/4" FPT Inlet $ 6.19 SS QJ8600-2 Double Swivel with1/4" FPT Inlet 7.71

Straight Cap

22669-1/4PPB

22674-1/4NYB

45° Angle Adapter 1/4" MPT x 11/16"-16 Thread for Std. Cap

45° Angle Adapter 1/4" MPT x QuickJet

D D D

QJ-1/4TNYB Adapter

QJ-1/4TTNYB

1/4" FPT x QuickJet QJT-NYB 11/16-16 Cap Thread x QJ Adapter

Adapter 1/4" MPT x QuickJet

Swivel Cap

Adapters D

90° Cap

QJ90-1NYR

Nozzle Adapter QuickJet Cap x 90° QuickJet Adapter

Part No. RETAIL SS 22669-1/4PPB 45° Nozzle Body ,1/4" MPT x 11/16-16 thread......... $ 1.76 SS 22674-1/4NYB 45° Nozzle Body, 1/4" MPT x Quick TeeJet .............. 2.69 SS QJ-1/4TNYB Cap Adapter with 1/4" FPT Inlet. .............................. 2.43 SS QJT-NYB Cap Adapter with11/16"-16 Cap Thread w/ Gasket.. 4.31 SS QJ-1/4TTNYB Cap Adapter with 1/4" MPT Inlet.............................. 2.43 SS 19191EPR Gasket for “QJT” Adaptors (Threaded end).............. 1.61 SS QJ90-1NYR Quick Jet Cap x 90° Quick Jet Adapter..................... 3.77

PTC Body

Part No. RETAIL SS QJ98588-NYR Straight QJ Cap for 1/4” .................................... $ 4.85 SS QJ114398-5/16 Straight QJ Cap for 5/16”................................... 4.85 SS QJ98586-NYR Straight QJ Cap for 3/8” .................................... 4.85 SS QJ98598-90-14 90° Cap for 1/4”.................................................. 6.06 SS QJ98599-90-38 90° Cap for 3/8”.................................................. 6.06 SS QJ98592-1/4-2 PTC Body for 1/4” Tube with 2# Check............. 9.98 SS QJ98592-1/4-5 PTC Body for 1/4” Tube 5# Check..................... 9.98 SS QJ98592-1/410 PTC Body for 1/4” Tube with 10# Check........... 9.98 SS QJ114400-5/16-5 PTC Body for 5/16” Tube with 5# Check........... 9.98 SS QJ114400-5/16-10 PTC Body for 5/16” Tube with 10# Check......... 10.05 SS QJ98590-3/8-2 PTC Body for 3/8” Tube with 2# Check............. 10.12 SS QJ98590-3/8-5 PTC Body for 3/8” Tube with 5# Check............. 9.98 SS QJ98590-3/810 PTC Body for 3/8” Tube with 10# Check........... 9.98 SS QJ114403-1/4 1/4” 90° Swivel Cap with Gasket....................... 12.13 SS QJ114404-5/16 5/16” 90° Swivel Cap with Gasket..................... 12.13 SS QJ114403-3/8 3/8” 90° Swivel Cap with Gasket....................... 12.13 SS 18999EPR EPDM Gasket as Replacement........................ 1.07 Caps Include EPDM Gasket.

QJ Vari-Spacing Clamps D

QuickJet Adapters

NPT NOZZLE 1/4" NPT NOZZLE

QJ4676-1/8NYR QJ4676-1/4CEL

1/4" NPT NOZZLE

Vari-Spacing Clamps QJ111-3/4 .............For 3/4" Pipe QJ111-1 ................For 1" Pipe QJ111-1-1/4 .........For 1-1/4" Pipe

Adapters 1/8" or 1/4" FPT x QuickJet

QJ4676-45-1/4

Adapter 45° 1/4" FPT x QuickJet

QJ4676-90-1/4

Adapter 90° 1/4" FPT x QuickJet

Part No. Discount RETAIL SS QJ111-3/4 Vari-Clamp for 3/4" Pipe ................................... 10% $ 2.29 SS QJ111-1 Vari-Clamp for 1" Pipe ....................................... 10% 2.29 SS QJ111-1-1/4 Vari-Clamp for 1-1/4" Pipe ................................ 10% 2.29 SS QJ111SQ-3/4 Vari-Clamp for 3/4" Square Tube ....................... 10% 2.29 SS QJ111SQ-1 Vari-Clamp for 1" Square Tube .......................... 10% 2.29 SS QJ111SQ-1-1/4 Vari-Clamp for 1-1/4" Square Tube .................... 10% 2.29 SS QJ111SQ-1-1/2 Vari-Clamp for 1-1/2" Square Tube .................... 10% 2.29 SS QJ125SS-1-1/4 Vari-Clamp Stainless Steel for 1-1/4" Sq. Tube.. 10% 4.98

Part No. RETAIL SS QJ4676-1/8NYR 1/8" FPT x QuickJet with EPDM Gasket................. $ 2.02 SS QJ4676-1/4CEL 1/4" FPT x QuickJet with EPDM Gasket................. 2.09 SS QJ4676-45-1/4 45° 1/4 FPT x QuickJet with EPDM Gasket........... 3.77 SS QJ4676-90-1/4 90° 1/4 FPT x QuickJet with EPDM Gasket........... 3.77

End Cap Assemblies for Diaphragm Check Valves Nylon / Polypropylene Material End Cap Assemblies Less Diaphragm Opening Part No. Pressures Color RETAIL SS 21950-2NYB 2 PSI Yellow $ 3.50 SS 21950-5NYB 5 PSI Black 3.50 SS 21950-8NYB 8 PSI Black 3.50 SS 21950-10NYB 10 PSI Black 3.50 SS 21950-15-NY 15 PSI Red 3.36 SS 21950-20NYB 20 PSI Black 3.50 SS CP21953-EPR Raised EPR Diaphragm....... 0.54 SS 21953VI Raised Viton® Diaphragm.... 1.49

B A

Vari-Spacing Square Clamps QJ111SQ-3/4 .......For 3/4" Square Tube QJ111SQ-1 ..........For 1" Square Tube QJ111SQ-1-1/4 ....For 1-1/4" Square Tube QJ125SS-1-1/4 .....For 1-1/4" Square Tube QJ111SQ-1-1/2.....For 1-1/2" Square Tube

We Have Our Catalogs as Well as Parts Schematics online! D

1/8" Gauge Tubing Connectors Part No.

Description

RETAIL

SS 21545NY 1/8" Tube Nut (See A).............................. $ 1.62 SS 21486NY 1/8" Union (See B).................................. 1.62 SS 21736NY 1/8"x3/16” Male Coupler + Tube Nut (See C) 3.77

www.dultmeier.com

Viton® is a registered trademark of DuPont Performance Elastomers

IND

DULTMEIER SALES • OMAHA, NE

(800) 228-9666

•

www.dultmeier.com

• DAVENPORT, IA

(800) 553-6975

E0357

Nozzle Parts Polypropylene Connectors

13438

These Tee’s & Ell’s are injection molded and include a locknut. Designed to mount in an 11/16" I. D. hole in an angle iron etc., or through one of the prefabricated clamp assemblies.

Part No. Type

Hose Size:

Std. Pkg.

MN 3838TT MN 38TL MN 1212TT MN 12TL MN 3434TT MN 34TL MN 8124

3/8" 3/8" 1/2" 1/2" 3/4" 3/4" –

50 50 50 50 25 25 —

Poly Tee Poly Ell Poly Tee Poly Ell Nylon Tee Nylon Ell Lock Nut

T’s and L’s are supplied with Locknuts.

Part No. SS 13437-540NYB SS 13438-540NYB SS 13439-540NYB

Clamps for Mounting “T” or “L” Nozzle Bodies on Square Tubing

$ 2.02 2.02 1.62 1.49 2.56 2.43 0.27

For Square Part No. Tube: Pkg. Clamp Material Discount TW B11-1 1" 50 Cad. Plated Steel 10% TW B11-114 1-1/4" 50 Cad. Plated Steel 10% SS AA111SQ-1 1" 50 Cad. Plated Steel 10% SS AA111SQ-1-1/4 1-1/4" 50 Cad. Plated Steel 10% SS AA111SQ-1-1/2 1-1/2" 50 Cad. Plated Steel 10%

RETAIL $ 2.69 2.43 4.45 6.77 8.11

Round Boom Clamp Assembly Consists of: Upper and Lower Clamps w/Screw

- Less the Tip Cap & Strainer -

No. 111

Injection molded of Black Nylon for UV resistance, with a Stainless steel insert threaded 11/16"-16 for nozzle attachment. Stainless steel locknuts are included. Designed to mount in an 11/16" I. D. hole in an angle iron etc., or through one of the prefabricated clamp assemblies. Maximum Temperature is 125° F.

SS 12201-3/4 Ell SS 12202-3/4 Tee SS 12201-1 Ell SS 12202-1 Tee

VARI-SPACING

The clamp assemblies shown above are designed to provide variable nozzle spacing on pipe or tubing sprayer booms. Pipe or tubing is used only to support the nozzles. These clamp assemblies are quoted below less the nozzle bodies but will accommodate the nozzle bodies with hose shank connections shown on this page.

Hose Part No. Type Size RETAIL

Part No.

3/4" $ 11.73 3/4" 11.73 1" 11.73 1" 11.73

SS AA111-3/4 SS AA111-1 SS AA111-1-1/4

Brass Tee’s & Ell’s - Less Tip Cap & Strainer D

For I.D. Hose

Brass

RETAIL

Part No.

SS 9191A 1/2"-Ell 1/2" $ 10.92 SS 9192A 1/2"-Tee 1/2" 10.79

Triple Shank Poly Nozzle Bodies Threads are 11/16" x 16 - Supplied with Locknut Maximum Temperature is 140° F. Part No.

Hose Size

Std.Pkg. RETAIL

TW T38C 3/8" I.D. TW T12C 1/2" I.D. TW T34C 3/4" I.D.

50 50 50

$ 4.05 4.05 4.05

25% Quantity Discount on Standard Packages.

Single Shank Nozzle Bodies

Hose Size

Pkg.

50 50

Discount

RETAIL

3/4" Pipe 1" Pipe 1-1/4" Pipe

50 50 50

10% 10% 10%

$ 3.90 3.90 6.46

Nylon Split Eyelet Nozzles Designed for quick installation on wet pipe or tube booms. Mounts in 3/8" hole. Pressures to 150 PSI. Black nylon. Maximum Temperature is 125° F.

25775-TNYB Part No. SS 25775-3/4TNYB SS 25775-1TNYB SS CP7717-2110VI

$ 1.22 1.25

Viton® is a registered trademark of DuPont Performance Elastomers

DULTMEIER SALES • OMAHA, NE

SS 7421-1/2TNY 1/2" Plated Nylon 11/16"-16 $ 3.36 SS 7421-3/4TNY 3/4" Plated Nylon 11/16"-16 3.36 SS 7421-1TNY 1" Plated Nylon 11/16"-16 3.36 SS 7421-1/2TSS 1/2" Plated Stainless 11/16"-16 10.79 SS 7421-3/4TSS 3/4" Plated Stainless 11/16"-16 10.79 SS 7421SS-1TSS 1" Stainless Stainless 11/16"-16 18.09 SS 8370B114-14 1-1/4" Stainless Stainless 1/4" FPT 34.44 SS 8370B114-38 1-1/4" Stainless Stainless 3/8" FPT 34.44 SS 8370B114-12 1-1/4" Stainless Stainless 1/2" FPT 34.44 SS 7418BU Replacement Buna Gasket....................... 2.29

Discount RETAIL

25% 25%

8370B

Fits Clamp OUTLET Pipe & Bolts Material Threaded RETAIL

- Polypropylene -

With 11/16-16 TeeJet thread. Can be used with standard tips, caps, strainers and orifice discs. Ideal for use in dribbling or streaming operations. Lock nut is included. Maximum Temperature is 140° F. Std. Std.Pkg. TW 3838DN 3/8" Barb TW 3812DN 1/2" Barb

Std. Pkg.

The easiest and fasted way to mount spray nozzles to a boom. To install nozzles, drill 9/32" hole, insert Split-Eyelet inlet and clamp assembly in place. Elevated inlet 7421 keeps sediment out of nozzle. Leakproof gasket included.

Machined from brass stock, these Tee’s & Ell’s have an 11/16"-16 male thread to accept standard nozzle caps and are also threaded internally (1/4" female pipe thread) to accept drop pipes etc. Part No.

To Clamp On

Split-Eyelet Assemblies

for 1/2" Hose

IND

Description RETAIL Elbow Connector............ $ 3.77 Tee Connector................ 3.77 Cross Connector............. 3.77

for 1" • 1-1/4" • 1-1/2" OD Tube

For 3/4" & 1"Hose

Part No.

Square Boom Clamp Assembly

High Volume Tee’s & Ells

13439

Nylon Hose Connectors with 1/2” inlets and 1/4" outlets in elbow, tee & cross styles shown. Maximum Temperature is 125° F.

Std. Pkg. DISCOUNT RETAIL

25% 25% 25% 25% 25% 25% —

Hose Shanks

13437

Tee’s & Ell’s for 3/8", 1/2" & 3/4" Hose

265

(800) 228-9666

•

www.dultmeier.com

Description RETAIL Split Eyelet: Fits 3/4" Pipe on 1" OD Tube......... $ 4.94 Split Eyelet: Fits 1" Pipe on 1-1/4" OD Tube...... 4.94 Viton® O-Ring Replacement.................... 0.94

• DAVENPORT, IA

(800) 553-6975

E0360

Spray Tips & Nozzles

266

Flat Spray Orifice Tips

Airplane & Helicopter Spraying

40° • 80° • 110°

DIAPHRAGM CHECK VALVE NOZZLES

— TAPERED EDGE — D

BRASS

Brass & Stainless Steel

STAINLESS STEEL

Spraying Systems Flat Spray Tapered Edge Interchangeable Orifice Tips for Herbicides, Insecticides and other Chemicals are available in either Brass or Stainless Steel. Color Coded Nylon Tips with Stainless Steel insert are shown on adjacent pages. TeeJet FLAT SPRAY TIP NO. and strainer screen size

20" SPACING

- 40˚ - 80˚ - 110˚ -

Liquid Capacity 4 5 6 7 8 10 Pressure 1 Nozzle MPH MPH MPH MPH MPH MPH in p.s.i. in GPM

SERIES

400067 800067 (100 Mesh) 4001 8001 11001 (100 Mesh) 40015 80015 110015 (100 Mesh) 4002 8002 11002 (50 Mesh) 4003 8003 11003 (50 Mesh) 4004 8004 11004 (50 Mesh) 4005 8005 11005 (50 Mesh) 4006 8006 11006 (50 Mesh) 4008 8008 11008 (50 Mesh) 4010 8010 11010 (No Strainer) 4015 8015 11015 (No Strainer) 4020 8020 11020 (No Strainer)

20 25 30 40 50 60 20 25 30 40 50 60 20 25 30 40 50 60 20 25 30 40 50 60 20 25 30 40 50 60 20 25 30 40 50 60 20 25 30 40 50 60 20 25 30 40 50 60 20 25 30 40 50 60 20 25 30 40 50 60 20 25 30 40 50 60 20 25 30 40 50 60

.05 .055 .06 .067 .07 .08 .07 .08 .09 .10 .11 .12 .11 .12 .13 .15 .17 .18 .14 .16 .17 .20 .23 .25 .21 .24 .26 .30 .34 .37 .28 .32 .35 .40 .45 .49 .35 .40 .43 .50 .56 .61 .42 .47 .52 .60 .67 .74 .57 .63 .69 .80 .89 .98 .71 .79 .87 1.00 1.12 1.23 1.06 1.19 1.30 1.50 1.68 1.84 1.41 1.58 1.73 2.00 2.23 2.45

3.5 3.9 4.3 5.0 5.6 6.1 5.3 5.9 6.4 7.4 8 9.1 7 8.8 9.7 11.1 12.5 13.6 10.5 11.7 12.9 14.9 16.6 18.2 15.8 17.6 19 22 25 27 21 23 26 30 33 36 26 29 32 37 42 45 32 35 39 45 50 55 42 47 52 59 66 73 53 59 64 74 83 91 79 88 97 111 125 136 105 117 128 149 166 182

2.8 3.2 3.5 4.0 4.5 4.9 4.2 4.7 5.1 5.9 6.6 7.3 6.3 7.0 7.7 8.9 10.0 10.9 8.4 9.4 10.3 11.9 13.3 14.6 12.6 14.1 15.4 17.8 19.9 22 16.8 18.8 21 24 27 29 21 23 26 30 33 36 25 28 31 36 40 44 34 38 41 48 53 58 42 47 51 59 66 73 63 70 77 89 100 109 84 94 103 119 133 146

Part No.

FLAT SPRAY

SS 800067BR SS 8001BR SS SS4001 SS SS8001 SS SS800067

.................. thru 8030BR thru SS4030 thru SS8030 ..................

2.4 2.6 2.9 3.3 3.7 4.1 3.5 3.9 4.3 5.0 5.5 6.1 5.3 5.9 6.4 7.4 8.3 9.1 7.0 7.8 8.6 9.9 11.1 12.1 10.5 11.7 12.9 14.9 16.6 18.2 14.0 15.7 17.2 19.8 22 24 17.5 19.6 21 25 28 30 21 23 26 30 33 36 28 31 34 40 44 49 35 39 43 50 55 61 53 59 64 74 83 91 70 78 86 99 111 121

2.0 2.3 2.5 2.8 3.2 3.5 3.0 3.4 3.7 4.2 4.7 5.2 4.5 5.0 5.5 6.4 7.1 7.8 6.0 6.7 7.4 8.5 9.5 10.4 9.0 10.1 11.0 12.7 14.2 15.6 12.0 13.4 14.7 17.0 19.0 21 15.0 16.8 18.4 21 24 26 18.0 20 22 25 28 31 24 27 29 34 38 42 30 34 37 42 47 52 45 50 55 64 71 78 60 67 73 85 95 104

1.8 2.0 2.2 2.5 2.8 3.1 2.6 2.9 3.2 3.7 4.2 4.6 3.9 4.4 4.8 5.6 6.2 6.8 5.3 5.9 6.4 7.4 8.3 9.1 7.9 8.8 9.7 11.1 12.5 13.6 10.5 11.7 12.9 14.9 16.6 18.2 13.1 14.7 16.1 18.6 21 23 15.8 17.6 19.3 22 25 27 21 23 26 30 33 36 26 29 32 37 42 45 39 44 48 56 62 68 53 59 64 74 83 91

For Aerial Spraying

1.4 1.6 1.7 2.0 2.2 2.4 2.1 2.4 2.6 3.0 3.3 3.6 3.2 3.5 3.9 4.5 5.0 5.5 4.2 4.7 5.1 5.9 6.6 7.3 6.3 7.0 7.7 8.9 10.0 10.9 8.4 9.4 10.3 11.9 13.3 14.6 10.5 11.7 12.9 14.9 16.6 18.2 12.6 14.1 15.4 17.8 19.9 22 16.8 18.8 21 24 27 29 21 23 26 30 33 36 32 35 39 45 50 55 42 47 51 59 66 73

Type 4664: Made in brass • 1/8" NPT female inlet connection by cap thread • For flow rates up to 1-1/2 GPM • Both at 2.25 GPM @ 5 PSI drop • Type 4666B has 1/8” x 1/8” FM connection. Type QJ8355NYB: Allows use of Quick TeeJet System from 1/8" or 1/4" NPT male connections • Side mounting provides protection • Includes ChemSaver® no-drip shut-off • Requires 10 PSI at the nozzle to open check valve • Standard Viton® diaphragm • Maximum operating pressure of 300 PSI • 2.25 GPM @ 5 PSI drop.

Type 8355NYB: Made of Nylon with Nylon/ polypropylene end cap assembly • Check valve opens at 10 PSI pressure • Choice of 1/8" or 1/4" NPT (F) inlet connection • For flow rates up to 2-1/2 GPM • Overall length is 2-3/4" • Maximum operating pressure of 125 PSI • Viton® diaphragm • 1/8” at 2.25 GPM @ 5 PSI drop, 1/4” at 3.9 GPM.

Replacement Parts Exploded View

ChemSaver®

Diaphragm Check Valves Back end of Diaphragm Check Valves & Nozzles (Brass & Aluminum)

Back end of Diaphragm Check Valves & Nozzles (Nylon)

CP6227-TEF Diaphragm Teflon (Optional) to be used with No. 4620 Diaphragm

21953VI Diaphragm Viton

Part No. SS 4664 SS 4666B SS QJ8355-1/8NYB SS QJ8355-1/4NYB SS 8355-1/8NYB SS 8355-1/4NYB SS CP4624 SS CP6227-TEF SS 9758BR SS 21953VI SS 4620VI SS CP21953-EPR

Brass Brass Stainless Stainless Stainless

Viton® is a registered trademark of DuPont Performance Elastomers

(800) 228-9666

4666B

Per Nozzle Material RETAIL

DULTMEIER SALES • OMAHA, NE

The TeeJet Diaphragm Check Valve Nozzle Assembly consists of nozzle body with integral diaphragm check valve less orifice, cap and strainer. TeeJet orifice discs and cores are often used in aerial spraying . . . write for Data Sheet 10945 for list of capacities. 4664

$ 3.50 3.63 9.18 9.18 20.50 TeeJet Packaged in 25’s. 10% Quantity Discount on 50+ Of One Size

IND

In this type nozzle the diaphragm check valve is an integral part of the nozzle assembly. Originally developed for use in aerial spraying. Nozzles of this design are now widely used wherever drip-free shut-off is desired. The spring backed diaphragm valve assures dependable closure with minimum pressure loss . . . and is ideal for aerial spraying, since in-flight inertial forces do not affect operation.

•

www.dultmeier.com

4620VI Diaphragm Viton

9758BR End Cap Sub-Assembly Brass, Aluminum

21950NYB ChemSaver® End Cap Assembly Nylon/polypropylene

CP4624 Retainer Brass, Aluminum

NOTE: Nib on Diaphragm fits into hole in End Cap Assembly

Diaphragm Nozzles: RETAIL Brass, Less Orifice, Cap & Strainer............. $ 24.52 Brass Diaphragm Check Valve, 1/8” F x 1/8” F. 23.58 Nylon, Less Orifice, Cap & Strainer............. 9.18 Nylon, Less Orifice, Cap & Strainer............. 9.18 Nylon, Less Orifice, Cap & Strainer............. 9.72 Nylon, Less Orifice, Cap & Strainer............. 9.72 Replacement Parts Retainer - Brass, Aluminum......................... 2.69 Diaphragm, Teflon (Optional)....................... 0.80 End Cap, Sub-Assembly - Brass, Aluminum 4.58 Viton® Diaphragm for Nylon Valves............ 1.49 Viton® Diaphragm for Brass Valves............ 1.49 EPDM Diaphragm for Valves....................... 0.54

• DAVENPORT, IA

(800) 553-6975

E0363

Nozzle Parts Diaphragm Check Valves

Type 12328-NY-1/2 1/2" NPT male inlet and female outlet

Nozzle Caps

Adapter Caps

FLOW RATE, G.P.M. 5 7 10 15 20 25 Pressure Drop, p.s.i. 1.0 1.8 3.6 8.2 14.4 23 For 12328-NY-1/2 Pressure Drop, p.s.i. 0.5 0.9 1.9 4.3 7.7 12 For 12328-NY-3/4

TeeJet Adapter Caps fit all bodies having 11/16"-16 Male thread and adapt to the various female pipe thread sizes listed below. Part No. Material FPT Thread RETAIL SS 4676NY-1/8 Nylon 1/8" $ 2.02 SS 4676NY-1/4 Nylon 1/4" 2.02 SS 4676-1/4 Brass 1/4" 2.43 SS 4676SS-1/8 Stainless 1/8" 8.24 SS 4676SS-1/4 Stainless 1/4" 8.24 SS 4676SS-3/8 Stainless 3/8" 13.20 SS 4676SS-1/2 Stainless 1/2" 18.22 SS 4676SS-3/4 Stainless 3/4" 29.75

1/2"Check Valve .................... $ 76.38 3/4"Check Valve .................... 76.38 Replacement Body for 1/2".... 27.34 Replacement Body for 3/4".... 27.34 Replacement Viton® Diaphragm 9.31

4676 Adaptor Cap

Nozzle Bodies

Hose Barb Stainless Check Valve Constructed of 302 and 303 stainless for high strength and corrosion resistance. Ball and spring also 302 stainless. 3/8” Hose barb inlet and 1/4” FPT outlet. 10 PSI opening pressure. Includes #250 stainless orifice disc inside which can be changed by user if desired. 4.0 GPM at 10 PSI or 8.0 GPM at 40 PSI (with included #250 orifice disc).

Part No. Description RETAIL SS 39188 3/8” HB x 1/4” FPT Stainless Check Valve $ 28.14 SS 39188-8400-540SS 1/2” HB x 1/4” FPT Stainless Check Valve 30.82

Check Valves For larger capacity TeeJet Nozzles where strainers are not required. Ball check opens at 5 PSI. Recommended for flow rates from .40 to 1.5 GPM. Stainless steel or poly construction. Note: Use of these Check Valves results in a pressure drop of 5 PSI. Part No. SS 11750-SS5 Stainless Check Valve SS 11750-PP5 Poly Check Valve

Poly Strainers with Stainless Screens

4514 SLOTTED NYLON Strainers one-piece construction for use with liquids containing suspended solids. Maximum temperature is 160° F. 5053 BRASS Strainers with Stainless Screens A three part assembly consisting of body, cap & screw.

Outlet Hose Barbs are used with standard nozzle caps to attach hoses or nozzle drops to standard TeeJet threaded bodies (11/16"-16 thread). Can also be used with the 4916 series orifice discs as flow regulators. Available in poly or stainless. Also fits inside CP25607 QuickJet caps.

50 25% 50 25% 50 25% - - - - - -

4193 POLY CHECK VALVE Strainers with Stainless Screens Polypropylene strainer & check valve prevents nozzle dripping. Fits all TeeJet nozzles. Ball check opens at 5 psi. For flow rates to 0.8 GPM. Also available in brass or stainless. Maximum temperature is 140° F. 9106 FUSED BRONZE FILTER Brass with fused bronze filter element equivalent to 300 mesh screen. For use with extra low capacity tips. Part No. Body Material SS 5053-50 Brass SS 5053-100 Brass SS 4193A-PP24 Poly Check SS 4193A-PP50 Poly Check SS 4193A-PP100 Poly Check SS 4514-10NY Nylon - BLUE SS 4514-20NY Nylon - RED SS 9106 Brass

RETAIL

$ 0.58 0.67 0.80 5.65 5.65 5.65

Mesh Screen Pkg. RETAIL 50 Stainless 100 $ 2.56 100 Stainless 100 2.56 24 Stainless 100 3.54 50 Stainless 100 3.40 100 Stainless 100 3.40 50 Slotted Nylon 100 1.07 25 Slotted Nylon 100 1.07 300 Fused Bronze 100 2.69

Retained Tip Strainers

Blank Discs & Caps

Strainer and gasket as a single unit - keeps strainer attached to the tip and cap when removed from the nozzle body. Designed for AIC and XRC tips but can be used with any QuickJet Caps.

Blank Discs replace the regular boom nozzle when it is desirable to block off certain nozzles for proper nozzle spacing. Std. Part No. Blank Discs Pkg. RETAIL

Viton® is a registered trademark of DuPont Performance Elastomers

(800) 228-9666

Part No. Mesh RETAIL SS 55215-50VI 50M Blue Poly Strainer with Viton® Gasket $ 2.83 SS 55215-100VI 100M Green Poly Strainer with Viton® Gasket 2.83 SS 55215-50 50M Blue Poly Strainer with EPR Gasket 1.49 SS 55215-100 100M Green Poly Strainer with EPR Gasket 1.49

SS 3942AL Aluminum 100 $ 0.40 SS 3942SS Stainless 100 0.67

DULTMEIER SALES • OMAHA, NE

Strainers

Poly or Stainless

Std. Part No. Material Size Pkg. DISCOUNT

IND

— Maximum Temperature is 125° F. —

RETAIL $ 18.09 4.72

TW K8400-1/4 Poly 1/4" TW K8400-3/8 Poly 3/8" TW K8400-1/2 Poly 1/2" SS 4251-250SS S.S. 1/4" SS 4251-400SS S.S. 3/8" SS 4251-500SS S.S. 1/2"

TeeJet Nozzle Bodies have 11/16"-16 Male thread for TeeJet Caps and adapt to the various pipe thread sizes listed below. Std. Std.Pkg. Part No. Material Pipe Thread Pkg. DISCOUNT RETAIL TW 3NB1614 Poly 1/4” Male 100 25% $ 0.94 SS 12094NY Nylon 1/4" Female 100 10% 1.35 SS 1/8TTB Brass 1/8" Male 100 10% 1.89 SS 1/8TB Brass 1/8" Female 100 10% 1.89 SS 1322 Brass 1/4" Male 100 10% 1.89 SS 1321 Brass 1/4" Female 100 10% 1.89 SS 1/4TTSS Stainless 1/4" Male 100 10% 12.80 SS 1/4TSS Stainless 1/4" Female 100 10% 12.80

Part No. Mesh Std. Pkg. DISCOUNT RETAIL SS 8079-PP24 24- White 100 10% $ 1.07 SS 8079-PP50 50- Blue 100 10% 1.07 SS 8079-PP100 100- Green 100 10% 1.07 SS 8079-PP200 200- Lt. Pink 100 10% 1.07

Outlet Hose Barbs D

Winged Cap

Std. Std.Pkg. Part No. Material Style Pkg. DISCOUNT RETAIL SS CP8027NYB Nylon - 100 10% $ 0.94 SS 18032ANY Nylon Winged 100 10% 1.07 SS 1325B Brass Hex 100 10% 1.21 SS 1325SS Stainless Hex 100 10% 7.17 TW 38027 Poly - 100 10% 0.60 SS CP20230 * Brass - 100 10% 1.62 * Use with Ceramic Discs & Cores

Part No. RETAIL

SS 12328NY-1/2 SS 12328NY-3/4 SS 12338-1/2NY SS 12338-3/4NY SS 12335VI

1325 Std. Cap

TeeJet Nozzle Caps fit all bodies having 11/16"-16 Male thread.

TYPE 12328NY Made of Nylon with Celcon bonnet. Check valve opens at 7 psi pressure. Male inlet connection and female outlet connection. Choice of 1/2" & 3/4" NPT sizes. Large capacity flow rates: up to 10 GPM for 1/2" NPT size, up to 15 GPM for 3/4" NPT size. Overall length 3". Weight is 9 ounces. Maximum Temperature is 125° F.

Type 12328-NY-3/4 3/4" NPT male inlet and female outlet connections

267

•

www.dultmeier.com

• DAVENPORT, IA

(800) 553-6975

E0361

268

Quick

SYSTEM

COLOR-CODED “Quick TeeJet” CAPS For instant nozzle tip identification

QuickJet Caps are available in 10 colors, and 11 different styles enabling you to develop your own color coding system. The caps are designed with grooves that fit locating lugs on the nozzle body. Caps are made of Celcon and are available for use with all spray tips used in TeeJet nozzles.

Quick TeeJet Cap

Seat Gasket

19438-EPR (EPDM)

Caps are supplied less Gaskets

19438-VI (Viton)

Color Code of Quick TeeJet Caps

Quick TeeJet Caps are designed with grooves that fit locating lugs on the nozzle body. Caps are made of Nylon and are available for use with all TeeJet Spray Tips.

FOR PRESSURES UP TO 300 PSI

New Celcon QuickJet Cap CP25611, CP25597 & CP25607

CAP VARIATIONS QJ4676-1/4CEL

1/4" FPT Adapter Has 1/4" FPT thread for drop pipe, pressure gauge, etc. Available in Black only with EPDM Gasket

QJ19843CELR

Blank Cap with Gasket To Temporarily shut-off selected Nozzles Available in Black only with EPDM Gasket

QJ4676-45-1/4 45° Quick TeeJet Cap with 1/4" FPT With EPDM Gasket

QJ4676-90-1/4 90° Quick TeeJet Cap with 1/4" FPT With EPDM Gasket

50854NYB

* Specify color code (see chart). 1 These caps only available in gray & rated to 150 PSI. 2 T hese Quick TeeJet Caps available only in Black. 3 Color available in CP25597, CP25611, CP114440, CP114442 & CP114444 caps. 4 Color available in CP114440, CP114442 & CP114501 caps. 5 Color available in CP114501 cap. 6 This cap offered in black, white, light green, light blue & telemagenta only.

Use with Quick TeeJet nozzle bodies to extend body length by 1”. Used to eliminate interference of spray pattern with sprayer boom. Nylon body. EPDM gasket.

QuickJet Caps Less Gasket - Specify Color Number 1 2 3 4 5 6 7 8 9* 10 Part No. Black White Red Blue Green Yellow Brown Orange PP Gray Violet RETAIL SS CP25611 x x x x x x x x x x $ 0.67 SS CP25609 x x x x x x x x x 0.67 SS CP25597 x x x x x x x x x 0.80 SS CP98578-1NY x 1.35 SS CP25595 x x x x x x x x 0.80 SS CP25599 x x x x x x x x 0.76 SS CP25607 x x x x x x x x x 0.80 SS CP26277 † x 0.80 SS CP21399 † x x x x x x x x x 1.07 SS CP23307 † x x x x x x x x x 1.21 SS CP58350 x x x x x x x x x 1.07 x = Cap is available in that color. *Polypropylene Caps (9) are an additional 15%. † = Includes CP23308 Hardi EPDM Gasket. If using TeeJet Strainer, CP26227 Gasket is Required.

IND

DULTMEIER SALES • OMAHA, NE

(800) 228-9666

•

Part No. RETAIL SS QJ4676-1/4CEL Threaded Cap, 1/4" FPT with Gasket ............. $ 2.09 SS QJ19843CELR Blank Cap With Gasket.................................... 1.96 SS 50854NYB Extender Cap with Gasket............................... 3.36 SS QJ4676-45-1/4 45° Quick TeeJet Cap, 1/4" FPT....................... 3.77 SS QJ4676-90-1/4 90° Quick TeeJet Cap, 1/4" FPT....................... 3.77 SS 19438EPR Single EPDM Gasket for QuickJet Caps.......... 0.80 SS 19438VI Single Viton® Gasket for QuickJet Caps........ 2.16 SS PK19438EPR Pkg. of 12 EPDM Gaskets for QuickJet Caps 8.51 SS PK19438VI Pkg. of 12 Viton® Gaskets for QuickJet Caps 23.45 SS 18999EPR EPDM Gasket for Flow Regulators, D-Discs & Cores 1.07

www.dultmeier.com

Viton® is a registered trademark of DuPont Performance Elastomers

• DAVENPORT, IA

(800) 553-6975

E0950

Spray Tips & Nozzles

269

Disc-Core Type Full Cone & Hollow Cone Spray Tips Hollow Cone Spray Pattern Produced by Cores #13, 23, 25, 45 & 46

* Use CP20229-NY gasket when 4514-NY Nylon slotted strainer is not used.

Cores

Ceramic Core Sizes Available:

Standard cores are made of brass. Also available in ceramic, hardened stainless steel and Nylon. All cores with the exception of ceramic are made with “nibs”. Make sure core is always placed with the nib facing the nozzle body.

Full Cone Spray Pattern

DC13-CER, DC23-CER, DC25-CER, DC31-CER, DC33-CER, DC35-CER, DC45-CER, DC46-CER, DC56-CER

Orifice Discs

Available in a variety of sizes and materials. Ceramic for increased wear life, hardened stainless steel, stainless steel and polymer.

Produced by Cores #31, 33, 35 & 56

Ceramic Disc Sizes Available: DCER-2 thru DCER-8, DCER-10.

Strainer Note:

For nozzles using orifice disc numbers 1, 1.5 and 2, or core numbers 31 and 33, slotted strainer number 4514-20 equivalent to 25 mesh screen size is required. For all other larger capacity discs and cores, slotted strainer number 4514-32 equivalent to 16 mesh screen size is required.

CP26277-1-NY Quick TeeJet® Cap For ceramic disc & core.

Part No. SS D1 thru D16 SS DE1 thru DE16 SS DCER1 thru DCER10 SS DVP-2 thru DVP-8

Discs: RETAIL Hardened Stainless Disc....................... $ 1.35 Stainless Disc........................................ 1.21 Ceramic Disc......................................... 3.50 Polymer Disc.......................................... 0.80

SS DC13CER thru DC56CER SS DC31HSS thru DC56HSS SS DC13 thru DC56 SS DC13NY thru DC56NY SS CP20230 SS CP26277-1 SS CP20229-NY SS 18999EPR

Water @ 70° F.

DULTMEIER SALES • OMAHA, NE

(800) 228-9666

Cores: Ceramic Core................................ $ 5.39 Hardened Stainless Core.............. 5.39 Brass Core.................................... 2.16 Nylon Core.................................... 1.18

Replacement Parts Brass Cap............................................... $ 1.62 Black QJ Cap.......................................... 0.80 Nylon Gasket.......................................... 1.21 EPDM Gasket......................................... 1.07

Viton® is a registered trademark of DuPont Performance Elastomers

•

www.dultmeier.com

• DAVENPORT, IA

(800) 553-6975

E1007

Spray Tips & Nozzles

270

Gallon Per Acre Gallon Per Acre Liquid Capacity Drop 20" SPACING 30" SPACING Size Pressure 1 Nozzle 5 6 7 8 5 6 7 8 80° 110° SERIES SERIES in PSI in GPM 80° 110° MPH MPH MPH MPH MPH MPH MPH MPH

TIP NO.

TIP COLOR

( Strainer Screen Size)

XR1101VS 20 XR8001 (100 Mesh) 30 (100 Mesh)

Orange

Green

XR80015 (100 Mesh)

Yellow

XR8002 (50 Mesh)

Blue

XR8003 XR8003VK (50 Mesh)

Red

XR8004 XR8004VK (50 Mesh)

Brown

XR8005 XR8005VK (50 Mesh)

Gray

XR8006 XR8006VK (50 Mesh)

White

XR8008 XR8008VK (50 Mesh)

Stainless Steel

XR8010SS (50 Mesh)

Stainless Steel

XR8015SS (50 Mesh)

XRC Polymer F = Fine

40 60 15 XR110015VS 20 XR110015VP 30 (100 Mesh) 40 60 XR11002VS 15 XR11002VK 20 30 XR11002VP 40 (50 Mesh) 60 XR11003VS 15 XR11003VK 20 30 XR11003VP 40 (50 Mesh) 60 XR11004VS 15 XR11004VK 20 30 XR11004VP 40 (50 Mesh) 60 XR11005VS 15 20 XR11005VK 30 XR11005VP 40 (50 Mesh) 60 XR11006VS 15 20 XR11006VK 30 XR11006VP 40 (50 Mesh) 60 XR11008VS 15 20 XR11008VK 30 XR11008VP 40 (50 Mesh) 60 15 XR11010SS 20 (50 Mesh) 30 40 60 15 XR11015SS 20 (50 Mesh) 30 40 60 15 XRC11020VP 20 (20 Mesh) 30 40 60

VF = Very Fine

M = Medium

.06 F F 3.6 3.0 2.6 2.3 2.4 2.0 1.7 1.5 .07 F F 4.2 3.5 3.0 2.6 2.8 2.3 2.0 1.8 .09 F F 5.1 4.3 3.7 3.2 3.4 2.9 2.5 2.1 .10 F F 5.9 5.0 4.2 3.7 4.0 3.3 2.8 2.5 .12 F VF 7.3 6.1 5.2 4.6 4.9 4.0 3.5 3.0 .09 M F 5.5 4.5 3.9 3.4 3.6 3.0 2.6 2.3 .11 F F 6.3 5.3 4.5 3.9 4.2 3.5 3.0 2.6 .13 F F 7.7 6.4 5.5 4.8 5.1 4.3 3.7 3.2 .15 F F 8.9 7.4 6.4 5.6 5.9 5.0 4.2 3.7 .18 F F 10.9 9.1 7.8 6.8 7.3 6.1 5.2 4.6 .12 M M 7.3 6.1 5.2 4.5 4.8 4.0 3.5 3.0 .14 M F 8.4 7.0 6.0 5.3 5.6 4.7 4.0 3.5 .17 F F 10.3 8.6 7.4 6.4 6.9 5.7 4.9 4.3 .20 F F 11.9 9.9 8.5 7.4 7.9 6.6 5.7 5.0 .25 F F 14.6 12.1 10.4 9.1 9.7 8.1 6.9 6.1 .18 M M 10.9 9.1 7.8 6.8 7.3 6.1 5.2 4.5 .21 M M 12.6 10.5 9.0 7.9 8.4 7.0 6.0 5.3 .26 F F 15.4 12.9 11.0 9.7 10.3 8.6 7.4 6.4 .30 F F 17.8 14.9 12.7 11.1 11.9 9.9 8.5 7.4 .37 F F 22 18.2 15.6 13.6 14.6 12.1 10.4 9.1 .24 C M 14.5 12.1 10.4 9.1 9.7 8.1 6.9 6.1 .28 M M 16.8 14.0 12.0 10.5 11.2 9.3 8.0 7.0 .35 M M 21 17.2 14.7 12.9 13.7 11.4 9.8 8.6 .40 M M 24 19.8 17.0 14.9 15.8 13.2 11.3 9.9 .49 F F 29 24 21 18.2 19.4 16.2 13.9 12.1 .31 C M 18.2 15.2 13.0 11.4 12.1 10.1 8.7 7.6 .35 C M 21 17.5 15.0 13.1 14.0 11.7 10.0 8.8 .43 M M 26 21 18.4 16.1 17.2 14.3 12.3 10.7 .50 M M 30 25 21 18.6 19.8 16.5 14.1 12.4 .61 F F 36 30 26 23 24 20 17.3 15.2 .37 C C 22 18.2 15.6 13.6 14.5 12.1 10.4 9.1 .42 C M 25 21 18.0 15.8 16.8 14.0 12.0 10.5 .52 M M 31 26 22 19.3 21 17.2 14.7 12.9 .60 M M 36 30 25 22 24 19.8 17.0 14.9 .74 M F 44 36 31 27 29 24 21 18.2 .49 VC C 29 24 21 18.2 19.4 16.2 13.9 12.1 .57 VC C 34 28 24 21 22 18.7 16.0 14.0 .69 C C 41 34 29 26 27 23 19.6 17.2 .80 M M 48 40 34 30 32 26 23 19.8 .98 M M 58 49 42 36 39 32 28 24 .61 XC VC 36 30 26 23 24 20 17.3 15.2 .71 VC C 42 35 30 26 28 23 20 17.5 .87 C C 51 43 37 32 34 29 25 21 1.00 C M 59 50 42 37 40 33 28 25 1.23 C M 73 61 52 45 49 40 35 30 .92 XC VC 55 45 39 34 36 30 26 23 1.06 XC VC 63 53 45 39 42 35 30 26 1.30 VC VC 77 64 55 48 51 43 37 32 1.50 VC C 89 74 64 56 59 50 42 37 1.84 C C 109 91 78 68 73 61 52 45 1.22 XC 72 60 51 45 48 40 34 30 1.41 XC 84 70 60 52 56 47 40 35 1.73 VC 103 86 74 64 69 57 49 43 2.00 VC 119 99 85 74 79 66 57 49 2.45 VC 146 121 104 91 97 81 69 61

C = Coarse

VC = Very Coarse XC = Extra Coarse - Larger Droplets for Best Drift Control

Extended Range Flat Spray Tips Stainless • Ceramic • Polymer XR Extended Range TeeJets are the best selection for Pre-Emergence Surface Applied Herbicides at 20-30 psi or Post-Emergence Systemic D Herbicides at 15-20 psi. Can also be used for Post Emergence Contact Herbicides at 30-60 psi At 15 PSI At 60 PSI or Pre-Plant incorporated products at 15-20 psi. Maximum temperature is 125° F. XR Tips have excellent pattern distribution at 15 to 60 psi. Drift is minimized at lower pressures and coverage is good at high pressure. Available in 80 or 110 degree patterns. VS Tips: Sizes 1 through 8 are colorcoded with a stainless insert.

D D

XRC Nozzle Cap Assembly with Gasket

VK Tips: Sizes 2 through 8 are color-coded with a ceramic insert. Larger sizes are all stainless. VSTips: Color coded polymer with a stainless insert. VP Tips: All polymer material. Part No.

XR Color Coded Tips

SS XR8001VS thru SS XR8008VS SS XR8002VK thru SS XR8008VK SS XR11001VS thru SS XR11008VS SS XR11002VK thru SS XR11008VK

RETAIL

$ 5.92 4.66 5.92 4.58

XR All Stainless Steel Tips

SS XR8010SS thru SS XR8015SS SS XR11010SS thru SS XR11015SS

7.04 7.04

XR All Polymer Tips Part No. Pkg. RETAIL SS XR110015VP thru SS XR11008VP 2.69 SS XRC11001VS thru SS XRC11008VS Nozzle/Cap Assembly with EPDM Gasket................... 25 $ 7.04 SS XRC80015VS thru SS XRC8006VS Nozzle/Cap Assembly with EPDM Gasket................... 25 7.04 SS XRC11002VK thru SS XRC11008VK Ceramic Nozzle & Cap Assembly with EPDM Gasket 25 5.65 10% Quantity Discount on 50+ Of One Size SS XRC11002VP thru SS XRC11020VP Polymer Nozzle & Cap Assembly with EPDM Gasket. 25 3.19

TIP COLOR

TIP NO.

Gallon Per Acre Gallon Per Acre Liquid Capacity Drop 20" SPACING 30" SPACING Pressure 1 Nozzle Size 5 6 7 8 5 6 7 8 80° 110° in GPM 80° 110° in PSI MPH MPH MPH MPH MPH MPH MPH MPH SERIES SERIES (Strainer Screen Size)

.09 F F 5.1 4.3 3.7 3.2 3.4 2.9 2.5 2.1 .09 F F 5.6 4.6 4.0 3.5 3.7 3.1 2.6 2.3 Orange .10 F F 5.9 5.0 4.2 3.7 4.0 3.3 2.8 2.5 45 .11 F VF 6.3 5.3 4.5 3.9 4.2 3.5 3.0 2.6 60 .12 F VF 7.3 6.1 5.2 4.6 4.9 4.0 3.5 3.0 30 .13 F F 7.7 6.4 5.5 4.8 5.1 4.3 3.7 3.2 80015VS 110015VS 35 .14 F F 8.3 6.9 6.0 5.2 5.6 4.6 4.0 3.5 Green (100 Mesh) (100 Mesh) 40 .15 F F 8.9 7.4 6.4 5.6 5.9 5.0 4.2 3.7 45 .16 F F 9.5 7.9 6.8 5.9 6.3 5.3 4.5 3.9 60 .18 F F 10.9 9.1 7.8 6.8 7.3 6.1 5.2 4.6 30 .17 M F 10.3 8.6 7.4 6.4 6.9 5.7 4.9 4.3 8002VS 11002VS 35 .19 M F 11.1 9.3 7.9 6.9 7.4 6.2 5.3 4.6 Yellow (50 Mesh) (50 Mesh) 40 .20 F F 11.9 9.9 8.5 7.4 7.9 6.6 5.7 5.0 45 .21 F F 12.6 10.5 9.0 7.9 8.4 7.0 6.0 5.3 60 .25 F F 14.6 12.1 10.4 9.1 9.7 8.1 6.9 6.1 30 .26 M F 15.4 12.9 11.0 9.7 10.3 8.6 7.4 6.4 8003VS 11003VS 35 .28 M F 16.7 13.9 11.9 10.4 11.1 9.3 7.9 6.9 Blue (50 Mesh) (50 Mesh) 40 .30 M F 17.8 14.9 12.7 11.1 11.9 9.9 8.5 7.4 45 .32 M F 18.9 15.8 13.5 11.8 12.6 10.5 9.0 7.9 60 .37 F F 22 18.2 15.6 13.6 14.6 12.1 10.4 9.1 30 .35 M M 21 17.2 14.7 12.9 13.7 11.4 9.8 8.6 .37 M M 22 18.5 15.9 13.9 14.8 12.3 10.6 9.3 8004VS 11004VS 35 Red .40 M M 24 19.8 17.0 14.9 15.8 13.2 11.3 9.9 (50 Mesh) (50 Mesh) 40 45 .42 M F 25 21 18.0 15.8 16.8 14.0 12.0 10.5 60 .49 M F 29 24 21 18.2 19.4 16.2 13.9 12.1 30 .43 C M 26 21 18.4 16.1 17.2 14.3 12.3 10.7 .47 M M 28 23 19.8 17.4 18.5 15.4 13.2 11.6 8005VS 11005VS 35 Brown (50 Mesh) (50 Mesh) 40 .50 M M 30 25 21 18.6 19.8 16.5 14.1 12.4 45 .53 M M 32 26 23 19.7 21 17.5 15.0 13.1 60 .61 M F 36 30 26 23 24 20 17.3 15.2 30 .52 C M 31 26 22 19.3 21 17.2 14.7 12.9 8006VS 11006VS 35 .56 C M 33 28 24 21 22 18.5 15.9 13.9 Gray (50 Mesh) (50 Mesh) 40 .60 C M 36 30 25 22 24 19.8 17.0 14.9 45 .64 C M 38 32 27 24 25 21 18.0 15.8 60 .74 C M 44 36 31 27 29 24 21 18.2 30 .69 C C 41 34 29 26 27 23 19.6 17.2 .75 C C 44 37 32 28 30 25 21 18.5 8008VS 11008VS 35 White (50 Mesh) (50 Mesh) 40 .80 C C 48 40 34 30 32 26 23 19.8 45 .85 C M 50 42 36 32 34 28 24 21 60 .98 C M 58 49 42 36 39 32 28 24 F = Fine VF = Very Fine M = Medium C = Coarse VC = Very Coarse - Larger Droplets for Best Drift Control 30

8001VS 11001VS 35 (100 Mesh) (100 Mesh) 40

IND

DULTMEIER SALES • OMAHA, NE

(800) 228-9666

•

www.dultmeier.com

Color-Coded Flat Spray Tips VS Style - Stainless

Flat Spray Tips are a good selection for preemergence surface applied herbicide at minimum pressure of 30 PSI to provide medium size droplets for good soil coverage. Good selection for post emergence contact herbicides at 40 PSI and higher to provide good canopy penetration and small droplets for better foliage coverage. Maximum temperature is 125° F. These flat spray tips have a tapered edge flat spray pattern for uniform coverage in broadcast spraying. Available in Visiflo Color-coded Stainless Steel in 80° spray angles in selected sizes. See Chart for Ordering. WHEN ORDERING SPECIFY TIP No.: Example: 8002VS - Stainless Steel with VisiFlo color-coding COLOR CODED Part No. Visiflo Spray Tips RETAIL SS TP8001VS thru TP8008VS Stainless $ 5.25 SS TP11001VS thru TP11008VS Stainless 5.25 TeeJet Packaged in 25’s. 10% Quantity Discount on 50+ Of One Size

• DAVENPORT, IA

(800) 553-6975

E0364

Spray Tips & Nozzles TTJ60

Air Induction Turbo TwinJet®

Turbo TwinJet Polymer Flat Spray Tips ®

AITTJ60 with VisiFlo® Color Coding - Tips Only

with VisiFlo® Color Coding

Typical Applications: • Best for pre-emerge surface applied herbicides - minimum spray pressure of 15 PSI. • Best for post-emerge contact herbicides - typical pressures of 40 PSI and higher. • Excellent for fungicide application.

SPRAY ANGLE 110˚

Typical Applications: • Excellent for more intensive penetration of thick foliage & achieving high rates of coverage with fungicides, insecticides or contact herbicides. • Two spray patterns spraying 60° apart, one in the forward direction of travel; one in the rear. • Good lateral coverage on vertical target areas. • Sizes available to meet a wide range of speeds & application rates. • Automatic spray alignment with CP25597 Quick TeeJet cap (02-06). • Automatic spray alignment with CP98578 Quick TeeJet cap (08-15).

OPTIMUM SPRAY HEIGHT 20” SPACING 30” SPACING 20” 30”

TTJ60 Nozzle Combo with Tip, Cap & EPDM Gasket

D D

Features: • Tip produces dual, tapered edge, wide angle, flat spray pattern for uniform coverage in broadcast spraying.

AITTJ60 Nozzle Combo with Tip, Cap & EPDM Gasket

• 60° between leading & trailing spray patterns. • Dual angled spray patterns help to penetrate the crop canopy and provide thorough leaf coverage. • Large, round free passages to minimize clogging. • All acetal construction for excellent chemical and wear resistance. • Larger droplet size than TT Nozzles for improved drift control. • Automatic spray alignment with CP25611 Quick TeeJet cap. • Suggested spray pressure range: 20-90 PSI. TIP COLOR

Liquid Capacity TIP NO. Pressure 1 Nozzle Strainer (GPM) Screen Size in PSI

Yellow

TTJ6011002VP 40 0.20 (100 Mesh) 50 0.22

20 0.14 30 0.17

Violet

Blue

Red

Brown

Gray

White

Light Blue

60 75 90 20 30 TTJ60110025VP 40 50 (100 Mesh) 60 75 90 20 30 40 TTJ6011003VP 50 (100 Mesh) 60 75 90 20 30 40 TTJ6011004VP 50 (100 Mesh) 60 75 90 20 30 40 TTJ6011005VP 50 (100 Mesh) 60 75 90 20 30 TTJ6011006VP 40 (100 Mesh) 50 60 75 90 20 30 TTJ6011008VP 40 (50 Mesh) 50 60 75 90 20 30 TTJ6011010VP 40 (50 Mesh) 50 60 75 90

0.24 0.27 0.30 0.18 0.22 0.25 0.28 0.31 0.34 0.38 0.21 0.26 0.30 0.34 0.37 0.41 0.45 0.28 0.35 0.40 0.45 0.49 0.55 0.60 0.35 0.43 0.50 0.56 0.61 0.68 0.75 0.42 0.52 0.60 0.67 0.73 0.82 0.90 0.57 0.69 0.80 0.89 0.98 1.06 1.20 0.71 0.87 1.00 1.12 1.22 1.32 1.50

GALLON PER ACRE GALLON PER ACRE 20" SPACING 30" SPACING 7 8 6 8 6 5 7 5 MPH MPH MPH MPH MPH MPH MPH MPH C 8.3 6.9 5.9 5.2 5.5 4.6 4.0 3.5 C 10.1 8.4 7.2 6.3 6.7 5.6 4.8 4.2 M 11.9 9.9 8.5 7.4 7.9 6.6 5.7 5.0 M 13.1 10.9 8.9 8.2 8.7 7.3 6.2 5.4 M 14.3 11.9 10.0 8.9 9.5 7.9 6.8 5.9 M 16.0 13.4 11.5 10.0 10.7 8.9 7.6 6.7 M 17.8 14.9 12.7 11.1 11.9 9.9 8.5 7.4 VC 10.7 8.9 7.6 6.7 7.1 5.9 5.1 4.5 C 13.1 10.9 9.3 8.2 8.7 7.3 6.2 5.4 C 14.9 12.4 10.6 9.3 9.9 8.3 7.1 6.2 M 16.6 13.9 11.9 10.4 11.1 9.2 7.9 6.9 M 18.4 15.3 13.2 11.5 12.3 10.2 8.8 7.7 M 20 16.8 14.5 12.6 13.5 11.2 9.6 8.4 M 23 18.8 16.1 14.1 15.0 12.5 10.7 9.4 VC 12.5 10.4 8.9 7.8 8.3 6.9 5.9 5.2 C 15.4 12.9 11.0 9.7 10.3 8.6 7.4 6.4 C 17.8 14.9 12.7 11.1 11.9 9.9 8.5 7.4 M 20 16.8 14.4 12.6 13.5 11.2 9.6 8.4 M 22 18.3 15.7 13.7 14.7 12.2 10.5 9.2 M 24 20 17.4 15.2 16.2 13.5 11.6 10.1 M 27 22 19.1 16.7 17.8 14.9 12.7 11.1 VC 16.6 13.9 11.9 10.4 11.1 9.2 7.9 6.9 C 21 17.3 14.9 13.0 13.9 11.6 9.9 8.7 C 24 19.8 17.0 14.9 15.8 13.2 11.3 9.9 M 27 22 19.1 16.7 17.8 14.9 12.7 11.1 M 29 24 21 18.2 19.4 16.2 13.9 12.1 M 33 27 23 20 22 18.2 15.6 13.6 M 36 30 25 22 24 19.8 17.0 14.9 VC 21 17.3 14.9 13.0 13.9 11.6 9.9 8.7 C 26 21 18.2 16.0 17.0 14.2 12.2 10.6 C 30 25 21 18.6 19.8 16.5 14.1 12.4 C 33 28 24 21 22 18.5 15.8 13.9 M 36 30 26 23 24 20 17.3 15.1 M 40 34 29 25 27 22 19.2 16.8 M 45 37 32 28 30 25 21 18.6 XC 25 21 17.8 15.6 16.6 13.9 11.9 10.4 C 31 26 22 19.3 21 17.2 14.7 12.9 C 36 30 25 22 24 19.8 17.0 14.9 C 40 33 28 25 27 22 19.0 16.6 M 43 36 31 27 29 24 21 18.1 M 49 41 35 30 32 27 23 20 M 53 45 38 33 36 30 25 22 VC 34 28 24 21 23 18.8 16.1 14.1 VC 41 34 29 26 27 23 19.5 17.1 C 48 40 34 30 32 26 23 19.8 C 53 44 38 33 35 29 25 22 C 58 49 42 36 39 32 28 24 C 63 52 47 39 44 36 31 27 M 71 59 51 45 48 40 34 30 XC 42 35 30 26 28 23 20 17.6 VC 52 43 37 32 34 29 25 22 VC 59 50 42 37 40 33 28 25 VC 67 55 48 42 44 37 32 28 C 72 60 52 45 48 40 35 30 C 78 65 58 49 54 45 39 34 C 89 74 64 56 59 50 42 37

Features: • Air Induction with dual 110° flat fan patterns. • 60° between leading & trailing spray patterns. • Good coverage with increased canopy penetration & best drift control. • Best suited for post emergence applications. • Excellent drift control with coarse to very coarse droplets. • Pressure ranges from 20 to 90 PSI.

Drop Size

Tabulation Based on Spraying Water at 70° F. VF=Very Fine • F=Fine • M=Medium • C=Coarse • VC=Very Coarse • XC=Extremely Coarse

Part No. Pkg. RETAIL SS TTJ6011002VP thru 11010VP SS TTJ60-11002VP-CE thru 11010VP-CE

Turbo TwinJet Tip Only Use CP25611 Caps & Gasket. 25 Nozzle Assembly Includes Tip, Cap and EPDM Gasket........... 25

$ 6.77 7.84

10% Quantity Discount on 50+ Of One Size

IND

271

DULTMEIER SALES • OMAHA, NE

(800) 228-9666

Tabulation Based on Spraying Water at 70° F. F = Fine VF = Very Fine M = Medium C = Coarse VC = Very Coarse XC = Extremely Coarse

Larger Coarse Droplets Provide Best Drift Control Part No. Pkg. RETAIL

SS AITTJ11002VP thru 11006VP SS AITTJ11008VP thru 110015VP SS AITTJ11002VP-CE thru 11006VP-CE SS AITTJ11008VP-CE thru 110015VP-CE

Turbo TwinJet Tip Only Use CP25597 Caps & Gasket........ 25 Turbo TwinJet Tip Only Use CP98578 Caps & Gasket........ 25 Turbo TwinJet Nozzle Assembly, Includes Tip, Cap & EPDM Gasket. 25 Turbo TwinJet Nozzle Assembly, Includes Tip, Cap & EPDM Gasket. 25

$ 7.17 8.11 8.24 9.85

10% Quantity Discount on 50+ Of One Size

•

www.dultmeier.com

• DAVENPORT, IA

(800) 553-6975

E0605

Spray Tips & Nozzles

272

Turbo TeeJet™ Polymer Flat Spray Tips

• Tapered edge, wide angle flat pattern for uniform coverage in broadcast spraying. • Large, round free passages to minimize clogging. 110° Spray pattern. • Excellent resistance to corrosive solutions. • Larger droplets for less drift. • Automatic spray alignment with CP25611 Quick TeeJet ® cap. • Use CP114501 Cap for 10 & 12 Sizes.

TT Nozzle Combo with Tip, Cap & EPDM Gasket

TIP COLOR

Orange

Green

Yellow

Violet

Blue

Red

Brown

Grey

White

LT. Blue

Magenta

TTI Features:

• All acetal construction for excellent chemical and wear resistance. • Removable pre-orifice for fast and easy cleaning. • Large, round passages to minimize plugging. • Tapered flat 110° spray pattern. • Large droplets are produced through a venturi air aspirator resulting in less drift. • Pressure Range: 15-100 PSI. • Use CP25597 Quick TeeJet® cap. • Use CP114501 Cap for 08 & 10 Sizes.

C = Coarse

TTI Nozzle Combo with Tip, Cap & EPDM Gasket

D D

TIP COLOR

Liquid Capacity TIP NO. Strainer Pressure 1 Nozzle Screen Size in PSI in GPM

Drop Size

GALLON PER ACRE 20" SPACING 7 8 6 MPH MPH MPH

5 MPH

GALLON PER ACRE 30" SPACING 6 7 MPH MPH

5 MPH

8 MPH

0.09 UC 5.3 4.5 3.8 3.3 3.6 3.0 2.5 2.2 0.11 UC 6.5 5.4 4.7 4.1 4.4 3.6 3.1 2.7 0.13 UC 7.7 6.4 5.5 4.8 5.1 4.3 3.7 3.2 0.15 UC 8.9 7.4 6.4 5.6 5.9 5.0 4.2 3.7 0.17 UC 10.1 8.4 7.2 6.3 6.7 5.6 4.8 4.2 60 0.18 XC 10.7 8.9 7.6 6.7 7.1 5.9 5.1 4.5 80 0.21 XC 12.5 10.4 8.9 7.8 8.3 6.9 5.9 5.2 100 0.24 XC 14.3 11.9 10.2 8.9 9.5 7.9 6.8 5.9 15 0.12 UC 7.1 5.9 5.1 4.5 4.8 4.0 3.4 3.0 20 0.14 UC 8.3 6.9 5.9 5.2 5.5 4.6 4.0 3.5 30 0.17 UC 10.1 8.4 7.2 6.3 6.7 5.6 4.8 4.2 UC 11.9 9.9 8.5 7.4 7.9 6.6 5.7 5.0 TTI11002VP 40 0.20 UC 13.1 10.9 9.3 8.2 8.7 7.3 6.2 5.4 (50 MESH) 50 0.22 60 0.25 UC 14.9 12.4 10.6 9.3 9.9 8.3 7.1 6.2 80 0.28 XC 16.6 13.9 11.9 10.4 11.1 9.2 7.9 6.9 100 0.32 XC 19.0 15.8 13.6 11.9 12.7 10.6 9.1 7.9 15 0.15 UC 8.9 7.4 6.4 5.6 5.9 5.0 4.2 3.7 20 0.18 UC 10.7 8.9 7.6 6.7 7.1 5.9 5.1 4.5 30 0.22 UC 13.1 10.9 9.3 8.2 8.7 7.3 6.2 5.4 TTI110025VP 40 0.25 UC 14.9 12.4 10.6 9.3 9.9 8.3 7.1 6.2 (50 Mesh) 50 0.28 UC 16.6 13.9 11.9 10.4 11.1 9.2 7.9 6.9 60 0.31 UC 18.4 15.3 13.2 11.5 12.3 10.2 8.8 7.7 80 0.35 XC 21.0 17.3 14.9 13.0 13.9 11.6 9.9 8.7 100 0.40 XC 24.0 19.8 17.0 14.9 15.8 13.2 11.3 9.9 15 0.18 UC 10.7 8.9 7.6 6.7 7.1 5.9 5.1 4.5 20 0.21 UC 12.5 10.4 8.9 7.8 8.3 6.9 5.9 5.2 30 0.26 UC 15.4 12.9 11.0 9.7 10.3 8.6 7.4 6.4 TTI11003VP 40 0.30 UC 17.8 14.9 12.7 11.1 11.9 9.9 8.5 7.4 UC 20.2 16.8 14.4 12.6 13.5 11.2 9.6 8.4 (50 MESH) 50 0.34 60 0.37 UC 22.0 18.3 15.7 13.7 14.7 12.2 10.5 9.2 80 0.42 XC 25.0 21.0 17.8 15.6 16.6 13.9 11.9 10.4 100 0.47 XC 28.0 23.0 19.9 17.4 18.6 15.5 13.3 11.6 15 0.24 UC 14.3 11.9 10.2 8.9 9.5 7.9 6.8 5.9 20 0.28 UC 16.6 13.9 11.9 10.4 11.1 9.2 7.9 6.9 30 0.35 UC 20.8 17.3 14.9 13.0 13.9 11.6 9.9 8.7 UC 23.8 19.8 17.0 14.9 15.8 13.2 11.3 9.9 TTI11004VP 40 0.40 UC 26.7 22.3 19.1 16.7 17.8 14.9 12.7 11.1 (50 MESH) 50 0.45 60 0.49 UC 29.1 24.3 20.8 18.2 19.4 16.2 13.9 12.1 80 0.57 XC 34.0 28.0 24.0 21.0 23.0 18.8 16.1 14.1 100 0.63 XC 37.0 31.0 27.0 23.0 25.0 21.0 17.8 15.6 15 0.31 UC 18.4 15.3 13.2 11.5 12.3 10.2 8.8 7.7 20 0.35 UC 20.8 17.3 14.9 13.0 13.9 11.6 9.9 8.7 30 0.43 UC 25.5 21.3 18.2 16.0 17.0 14.2 12.2 10.6 40 0.50 UC 29.7 24.8 21.2 18.6 19.8 16.5 14.1 12.4 TTI11005VP 50 0.56 UC 33.3 27.7 23.8 20.8 22.2 18.5 15.8 13.9 (50 MESH) 60 0.61 UC 36.2 30.2 25.9 22.6 24.2 20.1 17.3 15.1 80 0.71 XC 42.0 35.0 30.0 26.0 28.0 23.0 20.0 17.6 100 0.79 XC 47.0 39.0 34.0 29.0 31.0 26.0 22.0 19.6 15 0.37 UC 22.0 18.3 15.7 13.7 14.7 12.2 10.5 9.2 20 0.42 UC 25.0 21.0 17.8 15.6 16.6 13.9 11.9 10.4 30 0.52 UC 31.0 26.0 22.0 19.3 21.0 17.2 14.7 12.9 TTI11006VP 40 0.60 UC 36.0 30.0 25.0 22.0 24.0 19.8 17.0 14.9 (50 MESH) 50 0.67 UC 40.0 33.0 28.0 25.0 27.0 22.0 19.0 16.6 60 0.73 UC 43.0 36.0 31.0 27.0 29.0 24.0 21.0 18.1 80 0.85 C 50.0 42.0 - 32.0 - - - - 100 0.95 C 56.0 47.0 - 35.0 - - - - 15 0.49 UC 29.0 24.0 21.0 18.2 19.4 16.2 13.9 12.1 20 0.57 UC 34.0 28.0 24.0 21.0 23.0 18.8 16.1 14.1 30 0.69 UC 41.0 34.0 29.0 26.0 27.0 23.0 19.5 17.1 TTI11008VP 40 0.80 UC 48.0 40.0 34.0 30.0 32.0 26.0 23.0 19.8 (50 MESH) 50 0.89 UC 53.0 44.0 38.0 33.0 35.0 29.0 25.0 22.0 60 0.98 UC 58.0 49.0 42.0 36.0 39.0 32.0 28.0 24.0 80 1.13 XC 67.0 56.0 - 42.0 - - - 100 1.26 XC 75.0 62.0 - 47.0 - - - - 15 0.61 UC 36.0 30.0 26.0 23.0 24.0 20.0 17.3 15.1 20 0.71 UC 42.0 35.0 30.0 26.0 28.0 23.0 20.0 17.6 UC 52.0 43.0 37.0 32.0 34.0 29.0 25.0 22.0 TTI11010VP 30 0.87 UC 59.0 50.0 42.0 37.0 40.0 33.0 28.0 25.0 (50 MESH) 40 1.00 50 1.12 UC 67.0 55.0 48.0 42.0 44.0 37.0 32.0 28.0 60 1.22 UC 72.0 60.0 52.0 45.0 48.0 40.0 35.0 30.0 80 1.41 XC 84.0 70.0 - 52.0 - - - 100 1.58 XC 94.0 78.0 - 59.0 - - - - 15 20 30

Green

Yellow

Violet

Blue

Red

Brown

Gray

White

LT. Blue

TTI110015VP 40 (100 MESH) 50

M = Medium

C = Coarse

VC = Very Coarse

XC = Extremely Coarse

UC = Ultra Coarse

VC = Very Coarse XC = Extremely Coarse

Part No.

Pkg. RETAIL

SS TT11001VP thru 11008VP Turbo TeeJet Tip Only. Use with Cap CP25611......... 25 SS TT11010VP thru 11012VP Turbo TeeJet Tip Only. Use with Cap CP114501xxx. 25 SS TT11001-VP-CE thru 11008-VP-CE Nozzle Assembly. Tip, Cap & EPR Gasket.................. 25 SS TT11010-VP-CE thru 11012-VP-CE Nozzle Assembly. Tip, Cap & EPR Gasket.................. 25

$ 5.65 6.77 6.77 8.38

Part No.

DULTMEIER SALES • OMAHA, NE

Pkg.

SS TTI110015VP thru 11006VP Turbo Induction Tip Only. Use with Cap CP25597......... 25 SS TTI11008VP thru 110010VP Turbo Induction Tip Only. Use with Cap CP114501xxx. 25 SS TTI110015-VP-CE thru 11006-VP-CE Nozzle Assembly. Tip, Cap & EPR Gasket........... 25 SS TTI11008-VP-CE thru 110010-VP-CE Nozzle Assembly. Tip, Cap & EPR Gasket........... 25

RETAIL $ 9.72 11.26 10.65 12.80

10% Quantity Discount on 50+ Of One Size

IND

Induction Tips

GALLON PER ACRE GALLON PER ACRE Liquid Capacity 20" SPACING 30" SPACING TIP NO. 7 8 6 6 8 5 7 Drop Strainer Pressure 1 Nozzle 5 Screen Size in PSI in GPM Size MPH MPH MPH MPH MPH MPH MPH MPH 15 0.061 C 3.6 3.0 2.6 2.3 2.4 2.0 1.7 1.5 20 0.071 C 4.2 3.5 3.0 2.6 2.8 2.3 2.0 1.8 30 0.087 M 5.2 4.3 3.7 3.2 3.4 2.9 2.5 2.2 TT11001VP 40 0.10 M 5.9 5.0 4.2 3.7 4.0 3.3 2.8 2.5 M 6.5 5.4 4.7 4.1 4.4 3.6 3.1 2.7 (100 Mesh) 50 0.11 60 0.12 F 7.1 5.9 5.1 4.5 4.8 4.0 3.4 3.0 75 0.14 F 8.3 6.9 5.9 5.2 5.5 4.6 4.0 3.5 90 0.15 F 8.9 7.4 6.4 5.6 5.9 5.0 4.2 3.7 15 0.09 VC 5.3 4.5 3.8 3.3 3.6 3.0 2.5 2.2 20 0.11 C 6.5 5.4 4.7 4.1 4.4 3.6 3.1 2.7 30 0.13 M 7.7 6.4 5.5 4.8 5.1 4.3 3.7 3.2 TT110015VP 40 0.15 M 8.9 7.4 6.4 5.6 5.9 5.0 4.2 3.7 (100 MESH) 50 0.17 M 10.1 8.4 7.2 6.3 6.7 5.6 4.8 4.2 60 0.18 F 10.7 8.9 7.6 6.7 7.1 5.9 5.1 4.5 75 0.21 F 12.5 10.4 8.9 7.8 8.3 6.9 5.9 5.2 90 0.23 F 13.7 11.4 9.8 8.5 9.1 7.6 6.5 5.7 15 0.12 VC 7.1 5.9 5.1 4.5 4.8 4.0 3.4 3.0 20 0.14 VC 8.3 6.9 5.9 5.2 5.5 4.6 4.0 3.5 30 0.17 C 10.1 8.4 7.2 6.3 6.7 5.6 4.8 4.2 M 11.9 9.9 8.5 7.4 7.9 6.6 5.7 5.0 TT11002VP 40 0.20 M 13.1 10.9 9.3 8.2 8.7 7.3 6.2 5.4 (50 MESH) 50 0.22 60 0.25 M 14.9 12.4 10.6 9.3 9.9 8.3 7.1 6.2 75 0.27 F 16.0 13.4 11.5 10.0 10.7 8.9 7.6 6.7 90 0.30 F 17.8 14.9 12.7 11.1 11.9 9.9 8.5 7.4 15 0.15 VC 8.9 7.4 6.4 5.6 5.9 5.0 4.2 3.7 20 0.18 VC 10.7 8.9 7.6 6.7 7.1 5.9 5.1 4.5 30 0.22 C 13.1 10.9 9.3 8.2 8.7 7.3 6.2 5.4 TT110025VP 40 0.25 M 14.9 12.4 10.6 9.3 9.9 8.3 7.1 6.2 M 16.6 13.9 11.9 10.4 11.1 9.2 7.9 6.9 (50 MESH) 50 0.28 60 0.31 M 18.4 15.3 13.2 11.5 12.3 10.2 8.8 7.7 75 0.34 F 20.0 16.8 14.4 12.6 13.5 11.2 9.6 8.4 90 0.38 F 23.0 18.8 16.1 14.1 15.0 12.5 10.7 9.4 15 0.18 VC 10.7 8.9 7.6 6.7 7.1 5.9 5.1 4.5 20 0.21 VC 12.5 10.4 8.9 7.8 8.3 6.9 5.9 5.2 30 0.26 C 15.4 12.9 11.0 9.7 10.3 8.6 7.4 6.4 TT11003VP 40 0.30 C 17.8 14.9 12.7 11.1 11.9 9.9 8.5 7.4 (50 MESH) 50 0.34 M 20.2 16.8 14.4 12.6 13.5 11.2 9.6 8.4 60 0.37 M 22.0 18.3 15.7 13.7 14.7 12.2 10.5 9.2 75 0.41 M 24.4 20.3 17.4 15.2 16.2 13.5 11.6 10.1 90 0.45 F 26.7 22.3 19.1 16.7 17.8 14.9 12.7 11.1 15 0.24 XC 14.3 11.9 10.2 8.9 9.5 7.9 6.8 5.9 20 0.28 VC 16.6 13.9 11.9 10.4 11.1 9.2 7.9 6.9 30 0.35 C 20.8 17.3 14.9 13.0 13.9 11.6 9.9 8.7 TT11004VP 40 0.40 C 23.8 19.8 17.0 14.9 15.8 13.2 11.3 9.9 M 26.7 22.3 19.1 16.7 17.8 14.9 12.7 11.1 (50 MESH) 50 0.45 60 0.49 M 29.1 24.3 20.8 18.2 19.4 16.2 13.9 12.1 75 0.55 M 32.7 27.2 23.3 20.4 21.8 18.2 15.6 13.6 90 0.60 M 35.6 29.7 25.5 22.3 23.8 19.8 17.0 14.9 15 0.31 XC 18.4 15.3 13.2 11.5 12.3 10.2 8.8 7.7 20 0.35 VC 20.8 17.3 14.9 13.0 13.9 11.6 9.9 8.7 30 0.43 VC 25.5 21.3 18.2 16.0 17.0 14.2 12.2 10.6 C 29.7 24.8 21.2 18.6 19.8 16.5 14.1 12.4 TT11005VP 40 0.50 C 33.3 27.7 23.8 20.8 22.2 18.5 15.8 13.9 (50 MESH) 50 0.56 60 0.61 M 36.2 30.2 25.9 22.6 24.2 20.1 17.3 15.1 75 0.68 M 40.4 33.7 28.9 25.2 26.9 22.4 19.2 16.8 90 0.75 M 44.6 37.1 31.8 27.8 29.7 24.8 21.2 18.6 15 0.37 XC 22.0 18.3 15.7 13.7 14.7 12.2 10.5 9.2 20 0.42 VC 25.0 21.0 17.8 15.6 16.6 13.9 11.9 10.4 30 0.52 VC 31.0 26.0 22.0 19.3 20.6 17.2 14.7 12.9 VC 36.0 30.0 25.0 22.0 23.6 19.8 17.0 14.9 TT11006VP 40 0.60 C 40.0 33.0 28.0 25.0 26.5 22.1 19.0 16.6 (50 MESH) 50 0.67 60 0.73 C 43.0 36.0 31.0 27.0 28.5 24.1 20.5 18.1 75 0.82 C 49.0 41.0 35.0 30.0 32.5 27.1 23.2 20.3 90 0.90 M 53.0 45.0 38.0 33.0 - - - 15 0.49 XC 29.0 24.0 21.0 18.2 19.4 18.2 13.9 12.1 20 0.57 VC 34.0 28.0 24.0 21.0 22.6 18.5 16.1 14.1 30 0.69 VC 41.0 34.0 29.0 26.0 27.3 22.6 19.5 17.1 C 48.0 40.0 34.0 30.0 31.7 26.4 22.6 18.8 TT11008VP 40 0.80 C 53.0 44.0 38.0 33.0 35.2 29.4 25.2 22.0 (50 MESH) 50 0.89 60 0.98 C 58.0 49.0 42.0 36.0 38.8 32.5 27.7 26.3 75 1.10 M 65.0 54.0 47.0 41.0 43.6 36.3 31.1 27.2 90 1.20 M 71.0 59.0 51.0 45.0 - - - 15 0.61 UC 36.0 30.0 26.0 23.0 24.0 20.0 17.3 15.1 20 0.71 XC 42.0 35.0 30.0 26.0 28.0 23.0 20.0 17.6 VC 52.0 43.0 37.0 32.0 34.0 29.0 25.0 22.0 TT11010VP 30 0.87 40 1.00 VC 59.0 50.0 42.0 37.0 40.0 33.0 28.0 25.0 (50 MESH) 50 1.12 C 67.0 55.0 48.0 42.0 44.0 37.0 32.0 28.0 60 1.22 C 72.0 60.0 52.0 45.0 48.0 40.0 35.0 30.0 75 1.37 C 81.0 68.0 58.0 51.0 54.0 45.0 39.0 34.0 90 1.50 M 89.0 74.0 64.0 56.0 59.0 50.0 42.0 37.0 15 0.73 UC 43.0 36.0 - 27.0 - - - 20 0.85 UC 50.0 42.0 - 32.0 - - - 30 1.04 V XC C 62.0 51.0 - 39.0 - - - TT11012VP 40 1.20 VC 71.0 59.0 - 45.0 - - - - (50 MESH) 50 1.34 VC 80.0 66.0 - 50.0 - - - 60 1.47 C 87.0 73.0 - 55.0 - - - 75 - C - - - - - - 90 1.80 C 107 89.0 - 67.0 - - - -

F = Fine VF = Very Fine M = Medium

Turbo

(800) 228-9666

•

www.dultmeier.com

• DAVENPORT, IA

(800) 553-6975

E0372

Spray Tips & Nozzles

273

TTI TwinJet® Twin Flat Induction Tips The TTI60 TeeJet Air Induction Twin Flat Spray Tip provides extremely large droplets for maximum drift control along with the improved coverage of a twin spray. The single piece tip and cap design allows for fast, easy installation and, unlike some other twin sprays, has a very compact size. The TTI60 is ideal for the application of systemic, post-emerge herbicides.

110° Wide Angle.

Features:

60° Angle

Between • TTI60 produces two 110° wide angle, flat Leading & Trailing spray patterns for uniform coverage in Patterns broadcast applications. • 60° Angle between leading & trailing patterns for increased canopy penetration & leaf coverage. • All in one molded nozzle and Quick TeeJet® cap design provides automatic spray alignment. • Extremely large drift resistant droplets are produced through the use of a venturi air aspirator. • Provides excellent drift control & produces minimal driftable fines less than 1.5%. • Acetal construction for excellent chemical & wear resistance. • Removable pre-orifice allows for disassembly & cleaning. • Suggested spray pressure range of 20-100 PSI.

Tabulation Based on Spraying Water at 70° F. F = Fine VF = Very Fine M = Medium C = Coarse VC = Very Coarse XC = Extremely Coarse Larger Coarse Droplets Provide Best Drift Control

Part No.

SS TTI6011002VP thru 11006VP Twin Flat Air Induction Tips/Caps/Gaskets 10% Quantity Discount on 50+ Of One Size

Pkg. RETAIL 25

$ 12.13 M = Medium

C = Coarse

VC = Very Coarse

XC = Extremely Coarse

UC = Ultra Coarse

Service and Production Department

Service Dept

Dultmeier Sales engineers and builds a large variety of pumping systems, including “Custom Packages” to meet your unique needs. We build centrifugal, gear, diaphragm, fuel and DEF pumping systems. We also build Liquid De-Ice & turf / tree sprayers, chemical inductors, manifolds, load arm systems & more.

DULTMEIER SALES • OMAHA, NE

(800) 228-9666

•

www.dultmeier.com

• DAVENPORT, IA

(800) 553-6975

E1166

Air Induction Nozzles • Hardi Nozzles

274

Air Induction Nozzles For Reduced Drift

Tip No. Liquid Capacity Drop GALLONS PER ACRE 20" SPACING Tip Color Strainer Pressure 1 Nozzle Size 5 6 7 8 9 10 12 14 mph mph mph mph mph mph mph mph Screen Size psi (GPM) 110°

AI80015VS 40 0.15 XC 8.9 7.4 6.4 5.6 5.0 4.5 3.7 3.2 AI110015VS 50 0.17 XC 10.1 8.4 7.2 6.3 5.6 5.0 4.2 3.6 Green AI95015EVS 60 0.18 VC 10.7 8.9 7.6 6.7 5.9 5.3 4.5 3.8 (50 Mesh) 80 0.21 VC 12.5 10.4 8.9 7.8 6.9 6.2 5.2 4.5 100 0.24 C 14.3 11.9 10.2 8.9 7.9 7.1 5.9 5.1 AI8002VS 40 0.20 XC 11.9 9.9 8.5 7.4 6.6 5.9 5.0 4.2 AI11002VS 50 0.22 XC 13.1 10.9 9.3 8.2 7.3 6.5 5.4 4.7 Yellow AI9502EVS 60 0.24 VC 14.3 11.9 10.2 8.9 7.9 7.1 5.9 5.1 (50 Mesh) 80 0.28 VC 16.6 13.9 11.9 10.4 9.2 8.3 6.9 5.9 100 0.32 C 19.0 15.8 13.6 11.9 10.6 9.5 7.9 6.8 AI80025VS 40 .25 XC 14.9 12.4 10.6 9.3 8.3 7.4 6.2 5.3 AI110025VS 50 0.28 XC 16.6 13.9 11.9 10.4 9.2 8.3 6.9 5.9 Lavender AI95025EVS 60 0.31 XC 18.4 15.3 13.2 11.5 10.2 9.2 7.7 6.6 (50 Mesh) 80 0.35 VC 21 17.3 14.9 13.0 11.6 10.4 8.7 7.4 100 0.40 C 24 19.8 17.0 14.9 13.2 11.9 9.9 8.5 AI8003VS 40 0.30 XC 17.8 14.9 12.7 11.1 9.9 8.9 7.4 6.4 AI11003VS 50 0.34 XC 20 16.8 14.4 12.6 11.2 10.1 8.4 7.2 Blue AI9503EVS 60 0.37 XC 22 18.3 15.7 13.7 12.2 11.0 9.2 7.8 (50 Mesh) 100 0.47 C 28 23 19.9 17.4 15.5 14.0 11.6 10.0 AI8004VS 40 0.40 XC 24 19.8 17.0 14.9 13.2 11.9 9.9 8.5 AI11004VS 50 0.45 XC 27 22 19.1 16.7 14.9 13.4 11.1 9.5 Red AI9504EVS 60 0.49 XC 29 24 20.8 18.2 16.2 14.6 12.1 10.4 (50 Mesh) 80 0.57 VC 34 28 24 21.2 18.8 16.9 14.1 12.1 100 0.63 C 37 31 27 23 21 18.7 15.6 13.4 AI8005VS 40 0.50 XC 30 25 21 18.6 16.5 14.9 12.4 10.6 AI11005VS 50 0.56 XC 33 28 24 21 18.5 16.6 13.9 11.9 Brown AI9505EVS 60 0.61 XC 36 30 26 23 20 18.1 15.1 12.9 (50 Mesh) 80 0.71 VC 42 35 30 26 23 21 17.6 15.1 100 0.79 VC 47 39 34 29 26 24 19.6 16.8 AI8006VS 40 0.60 UC 36 30 25 22 19.8 17.8 14.9 12.7 50 0.67 XC 40 33 28 25 22 19.9 16.6 14.2 AI11006VS Gray 60 0.73 XC 43 36 31 27 24 22 18.1 15.5 (50 Mesh) 80 0.85 VC 50 42 36 32 28 25 21 18 100 0.95 VC 56 47 40 35 31 28 24 20 40 0.80 UC 48 40 34 30 26 24 19.8 17 50 0.89 XC 53 44 38 33 29 26 22 18.9 AI11008VS White 60 0.98 XC 58 49 42 36 32 29 24 21 (50 Mesh) 80 1.13 VC 67 56 48 42 37 34 28 24 100 1.26 VC 75 62 53 47 42 37 31 27 40 1.00 UC 59 50 37 30 25 50 1.12 XC 67 55 42 33 28 AI11010VS Lt. Blue 60 1.22 XC 72 60 45 36 30 (50 Mesh) 80 1.41 XC 84 70 52 42 35 100 1.58 VC 94 78 59 47 39 40 1.50 UC 89 74 56 45 37 50 1.68 XC 100 83 62 50 42 AI11015VS Lt. Green 60 1.84 XC 109 91 68 55 46 (50 Mesh) 80 2.12 V XC C 126 105 79 63 52 100 2.37 VC 141 117 88 70 59

These aspirating nozzles will do an excellent job of reducing drift on broadcast applications. Fluid flow pulls air into the nozzle through the air induction ports where it mixes with the spray fluid in a mixing chamber. The result is air filled droplets that are larger than normal, which are less subject to drift. As these drops burst on the target they explode on impact into many small droplets providing good coverage and penetration. Pressure Range is 30 - 115 PSI. For pre emerge herbicides minimum pressure is 40 psi, for posting chemicals use 80 psi or higher.VS Models feature a color coded polymer body with stainless tip insert. VK Models have a ceramic insert. VP Models have a polymer insert. Use with CP25597 quickjet caps. Tapered edge flat spray pattern. Has EPDM gasket.

AI110_ _VS Broadcast Flat Spray Nozzles Pattern

AIC TeeJet

Tapered Flat Spray Pattern

20" 110°

15 - 18"

Adjust spray height in the field to overlap minimum 30% of each edge of pattern.

AI950_ _VS Band Spray Nozzles Row Spacing

Tabulation Based on Spraying Water at 70° F. F = Fine VF = Very Fine M = Medium C = Coarse VC = Very Coarse XC = Extremely Coarse UC = Ultra Coarse Larger Droplets for Best Drift Control

Spray Band

GPA Conversion Factors*

Std. Part No. Pkg. RETAIL

SS AI80015VS thru AI8006VS Broadcast Nozzles 25 $ 11.32 SS AI110015VS thru AI11015VS Broadcast Nozzles 25 11.32 SS AI95015EVS thru AI9508EVS Banding Nozzles 25 11.73 SS AIC110025VS thru AIC11010VS Nozzle Cap Assembly with Gasket * 25 12.40 SS AIC110025VK thru AIC11005VK Nozzle Cap Assembly with Gasket * 25 10.12 SS AIC11002VP thru AIC11015VP Nozzle Cap Assembly 25 5.65 * Tip/Cap Combination. 10% Quantity Discount on 50+ Of One Size

95˚

30˚

40˚

8" 4" 3.8 5.0 D

10" 12" 15"

5" 6" 8"

4.0 3.3 2.6

* To find GPA rate on band widths, multiply the tabulated GPA for ROW SPACING by conversion factors.

THE CAPS LISTED BELOW ARE FOR HARDI NOZZLE BODIES CP21399* with HARDI Gaskets

3.0 2.5 2.0

Hardi® Adapters 02-06

Adapters convert Hardi® Nozzle Bodies for use with TeeJet or Hypro QJ caps. EPDM gasket is included.

CP23307* with HARDI Gaskets

CP58350* with HARDI Gaskets

55240-CELR

9950-0024

QuickJet Caps Less Gasket - Specify Color Number 1 2 3 4 5 6 7 8 9* 10 Part No. Black White Red Blue Green Yellow Brown Orange PP Gray Violet RETAIL † SS CP21399 x x x x x x x x x $ 1.07 SS CP23307 † x x x x x x x x x 1.21 SS CP58350 † x x x x x x x x x 1.07 x = Cap is available in that color. *Polypropylene Caps (9) are an additional 15%. † = Includes CP23308 Hardi EPDM Gasket. If using TeeJet Strainer, CP26227 Gasket is Required.

IND

DULTMEIER SALES • OMAHA, NE

(800) 228-9666

•

www.dultmeier.com

Part No. RETAIL SS 55240-CELR Converts Hardi Body for TeeJet Caps .......... $ 2.43 TW 9950-0024 Converts Hardi Body for Hypro Caps, 10 pk. 10.52

• DAVENPORT, IA

(800) 553-6975

E0371

Air Induction Nozzles Features

Air Induction XR Flat Spray Tips Extended Range (15 to 90 PSI)

TIP COLOR Drop PSI Size

Capacity Capacity 1 Nozzle 1 Nozzle In GPM In Oz./Min.

FOR TURF GALLONS PER ACRE 20” SPACING 4 MPH 5 MPH

6 MPH

GALLONS PER 1000 SQ. FT.

8 MPH 10 MPH 12 MPH 15 MPH

20 MPH 2 MPH

3 MPH

275

4 MPH

5 MPH

GREEN AIXR110015 (100)

• 110° Wide, tapered flat spray angle with air induction technology offers better drift management. • Made of a two-piece UHMWPE polymer construction with VisiFlo® color coding. UHMPE provides excellent chemical resistance, including acids, as well as exceptional wear life. • Depending on the chemical, produces large air-filled drops through a Venturi air aspirator. • Removable pre-orifice. • Use CP25611 Quick TeeJet® cap • Use CP11442 Quick TeeJet® cap + Gasket for 08 & 10 sizes.

YELLOW AIXR11002 (50)

D D

VIOLET AIXR110025

AIXR Nozzle Combo with Tip, Cap & EPDM Gasket

(50)

BLUE AIXR11003 D

(50)

RED AIXR11004 (50)

Spacing

BROWN AIXR11005 Spray Height

(50)

Removable Pre-Orifice

GRAY AIXR11006 (50)

Tip Body

WHITE AIXR11008

Air Inlet

(50) Exit Orifice

LT. BLUE AIXR11010

AIXR110_ _VP Spray Nozzles (Cross Section View)

(50)

M = Medium

C = Coarse

VC = Very Coarse

XC = Extremely Coarse

UC = Ultra Coarse

20"

Part No.

Pkg.

RETAIL

SS AIXR110015VP thru 11006VP

Tip Only. Use Cap #CP25611...... 25 $ 6.19

SS AIXR11008VP thru 11010VP

Tip Only. Use Cap #CP11442...... 25

7.44

SS AIXR110015VP-CE thru 11006VP-CE

Nozzle Assembly......................... 25

7.30

SS AIXR11008VP-CE thru 11010VP-CE

Nozzle Assembly......................... 25

8.38

110°

10% Quantity Discount on 50+ Of One Size

IND

DULTMEIER SALES • OMAHA, NE

(800) 228-9666

•

www.dultmeier.com

20"

Adjust spray height in the field to overlap minimum 30% of each edge of pattern.

• DAVENPORT, IA

CONTACT PRODUCT

SYSTEMIC PRODUCT

DRIFT MANAGEMENT

GOOD

EXCELLENT

(800) 553-6975

E0778

Spray Nozzles & Tips

276

Even Flat Spray Tips

1/4" Flexible Drops

For pre-emergence and other types of band spraying Approximate GPA* Spray Height Conversion Band Factors Width 40° 80° 95° 30" Row 40" Row Series Series Series Spacing Spacing

QJ21353 Series for Spraying Systems "QuickJet" Nozzles D D

21354 Nylon Drop with standard cap

8" 10" 5" 4" 3.8 5.0 10" 12" 6" 5" 3.0 4.0 12" 14" 7" 6" 2.5 3.3 15" 19" 9" 8" 2.0 2.6 * To find GPA rate on band widths, multiply the tabu lated GPA for ROW SPACING by conversion factors.

BRASS and COLOR CODED STAINLESS STEEL DRIFT GUARD

BANDING EXAMPLE: For a Banding Rate of 20 GPA/5 MPH/15" Band, 1 nozzle per band:

Part No. SS QJ21353-15NYB SS QJ21353-24NYB SS 21354-15NYB SS 21354-24NYB

SPRAY BAND

*GPA - Gallons Per Field Acre Liquid Capacity Capacity 3 MPH 4 MPH 5 MPH Pressure 1 Nozzle 1 Nozzle

7 MPH

Strainer in PSI in GPM in oz/min 30" 40" 30" 40" 30" 40" 30" 40" Screen Size Row Row Row Row Row Row Row Row Spacing Spacing Spacing Spacing Spacing Spacing Spacing Spacing

Orange: 8001EVS Brass: 8001E SS4001E Green: 80015EVS 80015E SS40015E DG95015EVS Yellow: 8002EVS 8002E SS4002E DG9502EVS Blue: 8003EVS 8003E SS4003E DG9503EVS Red: 8004EVS 8004E SS4004E DG9504EVS Brown: 8005EVS 8005E SS4005E DG9505EVS Gray: 8006EVS Brass: 8006E (50-Mesh) White: 8008EVS Brass: 8008E (50-Mesh) Brass: 8010E (No Strainer) SS8010E Brass: 8015E (No Strainer) SS8015E

20 30 40 20 30 40 20 30 40 20 30 40 20 30 40 20 30 40 20 30 40 20 30 40 20 30 40 20 30 40

0.07 9 4.7 3.5 3.5 2.6 2.8 2.1 2.0 1.5 0.09 11 5.7 4.3 4.3 3.2 3.4 2.6 2.4 1.8 0.10 13 6.6 5.0 5.0 3.7 4.0 3.0 2.8 2.1 0.11 14 7.0 5.3 5.3 3.9 4.2 3.2 3.0 2.3 0.13 17 8.6 6.4 6.4 4.8 5.1 3.9 3.7 2.8 0.15 19 9.9 7.4 7.4 5.6 5.9 4.5 4.2 3.2 0.14 18 9.3 7.0 7.0 5.3 5.6 4.2 4.0 3.0 0.17 22 11.4 8.6 8.6 6.4 6.9 5.1 4.9 3.7 0.20 26 13.2 9.9 9.9 7.4 7.9 5.9 5.7 4.2 0.21 27 14.0 10.5 10.5 7.9 8.4 6.3 6.0 4.5 0.26 33 17.1 12.9 12.9 9.6 10.3 7.7 7.3 5.5 0.30 38 19.8 14.9 14.9 11.1 11.9 8.9 8.5 6.4 0.28 36 18.7 14.0 14.0 10.5 11.2 8.4 8.0 6.0 0.35 44 22.9 17.1 17.1 12.9 13.7 10.3 9.8 7.3 0.40 51 26.4 19.8 19.8 14.9 15.8 11.9 11.3 8.5 0.35 45 23.3 17.5 17.5 13.1 14.0 10.5 10.0 7.5 0.43 55 28.6 21.4 21.4 16.1 17.1 12.9 12.2 9.2 0.50 64 33.0 24.8 24.8 18.6 19.8 14.9 14.1 10.6 0.42 54 28.0 21.0 21.0 15.8 16.8 12.6 12.0 9.0 0.52 67 34.3 25.7 25.7 19.3 20.6 15.4 14.7 11.0 0.60 77 39.6 29.7 29.7 22.3 23.8 17.8 17.0 12.7 0.57 72 37.6 28.0 28.0 21.0 22.4 16.8 16.0 12.0 0.69 89 45.7 34.3 34.3 25.7 27.4 20.6 19.6 14.7 0.80 102 52.8 39.6 39.6 29.7 31.7 23.8 22.6 17.0 0.71 91 46.9 35.1 35.1 26.4 28.1 21.1 20.1 15.1 0.87 111 57.4 43.1 43.1 32.3 34.5 25.8 24.6 18.5 1.00 128 66.0 49.5 49.5 37.1 39.6 29.7 28.3 21.2 1.06 136 70.0 52.5 52.5 39.4 42.0 31.5 30.0 22.5 1.30 166 85.8 64.4 64.4 48.3 51.5 38.6 36.8 27.6 1.50 192 99.0 74.3 74.3 55.7 59.4 44.6 42.4 31.8

Part No. Even Flat Spray Tips RETAIL SS 8001E thru 8015E Brass Tips....................... $ 3.63 SS SS4001E thru SS8015E S.S.Tips.................... 9.31 SS TP8001EVS thru TP8008EVS Color Coded Stainless Tips............................ 5.25 SS TP9504EVS and TP9506EVS Color Coded Stainless Tips............................ 5.35 SS DG95015EVS thru DG9505EVS......................... Drift Guard Visa Flo Nozzles.......................... 8.38

20 15006 25 (50 Mesh) 30 40 20 15008 25 (50 Mesh) 30 40 20 15009 25 (50 Mesh) 30 40

.42 15.8 .47 17.6 .52 19.3 .60 22 .57 21 .63 23 .69 26 .80 30 .64 24 .71 26 .78 29 .90 33

Double-Orifice Tips 150˚ Series

12.6 10.5 9.0 14.1 11.7 10.1 15.4 12.9 11.0 17.8 14.9 12.7 16.8 14.0 12.0 18.8 15.7 13.4 21 17.2 14.7 24 19.8 17.0 18.9 15.8 13.5 21 17.6 15.1 23 19.3 16.5 27 22 19.1

Part No. Double Orifice Tips RETAIL

DULTMEIER SALES • OMAHA, NE

(800) 228-9666

Single Swivel On 50+ Part No. Discount

SS 8600-1/4TNYB Single Swivel SS 8600-2-1/4T Double Swivel

Double Swivel RETAIL

5% 5%

$ 7.44 8.78

— QuickJet Double Swivels are In Our Nozzle Parts Section —

Off-Center Flat Spray Tips - for Smaller Capacities D

Part No.

SS 150015 thru 15009 Brass........................................ $ 7.84 SS 150015SS thru 15009SS Stainless......................... 14.00 TeeJet Packaged in 25’s. 10% Quantity Discount on 50+ Of One Size

IND

- NYLON -

“H” = 18” Capacity GPA 1 “W” Nozzle in 3 4 5 6 PSI in GPM inches mph mph mph mph 30 0.17 68 5.0 3.7 3.0 2.5 OC-02 40 0.20 70 5.7 4.2 3.4 2.8 60 0.24 72 6.6 5.0 4.0 3.3 30 0.26 77 6.7 5.0 4.0 3.3 OC-03 40 0.30 80 7.4 5.6 4.5 3.7 60 0.37 82 8.9 6.7 5.4 4.5 30 0.35 91 7.6 5.7 4.6 3.8 OC-04 40 0.40 93 8.5 6.4 5.1 4.3 60 0.49 94 10.3 7.7 6.2 5.2 30 0.52 99 10.4 7.8 6.2 5.2 OC-06 40 0.60 101 11.8 8.8 7.1 5.9 60 0.73 102 14.2 10.6 8.5 7.1 30 0.69 100 13.7 10.2 8.2 6.8 OC-08 40 0.80 102 15.5 11.6 9.3 7.8 60 0.98 104 18.7 14.0 11.2 9.3 30 1.04 102 20 15.1 12.1 10.1 OC-12 40 1.20 104 23 17.1 13.7 11.4 60 1.47 105 28 21 16.6 13.9 30 1.39 132 21 15.6 12.5 10.4 OC-16 40 1.60 138 23 17.2 13.8 11.5 60 1.96 143 27 20 16.3 13.6

TQ150

Double outlet spray tip for directed application of herbicides to row middles

For installation at the end of drop pipes with 1/4" FPT pipe thread. Nozzle bodies hold a set position; are not affected by vibrations. Made of NYLON. Priced below LESS tips, caps and strainers. Maximum Temperature is 125° F. Order “TeeJet” Nozzle parts to complete the swivel as shown.

TeeJet Off-Center Flat Spray Tips are commonly installed in double or single swivel nozzle bodies. Because these bodies are adjustable for angular position, a wide spray swath is easily obtained.

TeeJet Packaged in 25’s. 10% Quantity Discount on 50+ Of One Size TIP NO. Liquid Capacity GALLONS PER ACRE - 40" SPACING 5 6 7 (Strainer Pressure 1 Nozzle 4 Screen Size) in PSI in GPM MPH MPH MPH MPH 20 .11 3.9 3.2 2.6 2.3 150015 25 .12 4.4 3.5 2.9 2.5 (100 Mesh) 30 .13 4.8 3.9 3.2 2.8 40 .15 5.6 4.5 3.7 3.2 20 .14 5.3 4.2 3.5 3.0 15002 25 .16 5.9 4.7 3.9 3.4 30 .17 6.4 5.1 4.3 3.7 (100 Mesh) 40 .20 7.4 5.9 5.0 4.2 20 .21 7.9 6.3 5.3 4.5 15003 25 .24 8.8 7.0 5.9 5.0 30 .26 9.7 7.7 6.4 5.5 (100 Mesh) 40 .30 11.1 8.9 7.4 6.4 20 .28 10.5 8.4 7.0 6.0 25 .32 11.7 9.4 7.8 6.7 15004 30 .35 12.9 10.3 8.6 7.4 (50 Mesh) 40 .40 14.9 11.9 9.9 8.5 20 .35 13.1 10.5 8.8 7.5 15005 25 .40 14.7 11.7 9.8 8.4 30 .43 16.1 12.9 10.7 9.2 (50 Mesh) 40 .50 18.6 14.9 12.4 10.6

Tube Length INLET Connection RETAIL Nylon 15" “QuickJet System” $ 10.12 Nylon 24" “QuickJet System” 10.12 Nylon 15" 11/16"-16 Swivel Nut 6.46 Nylon 24" 11/16"-16 Swivel Nut 7.30

Single & Double Swivel Nozzles

Maximum Temperature is 125° F.

Note: Banding rate is “Broadcast Rate Basis” in above formula.

TIP SIZES

INDIVIDUAL DROP PIPES with 1/4" MPT Outlet Connection

ROW SPACING

Solve for GPM = GPA x MPH x W÷N 5940 20 x 5 x 15 5940 = .25 GPM per nozzle Use 8003EVS at 30 PSI

Maximum Temperature is 125° F.

Description RETAIL

SS OC02 thru OC16 Brass Off-Center Tip.............. SS OCSS02 thru OCSS16 Stainless Off-Center Tip.........

•

www.dultmeier.com

• DAVENPORT, IA

(800) 553-6975

$ 9.58 14.00

E0365