DPA_21_04

Page 1

April 2021 The Engineer’s guide to new products & design ideas

Wired or wireless:

Which is the best technology for sensor deployment?

16: Fastener quality

32: Linear actuators

The ins and outs of fastener quality assurance

What criteria should I consider when selecting a linear actuator?



Contents

April 2021 The Engineer’s guide to new products & design ideas

Paige’s Page

Wired or wireless:

Which is the best technology for sensor deployment?

04: Editor’s comment Networking in this new era: HANNOVER MESSE 2021

Test & Measurement Technology Focus: 06: Sensor data system

16: Fastener quality

32: Linear actuators

The ins and outs of fastener quality assurance

What criteria should I consider when selecting a linear actuator?

Wired or wireless: Which is the best technology for sensor deployment?

Cover Story:

201016_9-6_Mill_DPA_UK_Snipe.indd 1

10/14/20 3:22 PM

Advantech discusses the factors that engineers deploying sensors for data acquisition systems should consider when choosing between wired and wireless architecture. p.6 (Cover image: Shutterstock)

Group Editor: Paige West paige.west@imlgroup.co.uk Assistant Editor: Sophia Bell sophia.bell@imlgroup.co.uk Publisher: Andrew Quenault andrew.quenault@imlgroup.co.uk Production: Holly Reed holly.reed@imlgroup.co.uk Design: Graham Rich Design www.grahamrichdesign.co.uk Head Office: IML Group, Blair House, 184/186 High Street, Tonbridge, Kent TN9 1BQ Tel: 01732 359990 E-mail: dpa@imlgroup.co.uk DPA ISSN 0965-4747 Copyright in the contents of Design Products & Applications, its websites and newsletters is the property of the publisher. The publisher and the sponsors of this magazine are not responsible for the results of any actions or omissions taken on the basis of information in this publication. In particular, no liability can be accepted in result of any claim based on or in relation to material provided for inclusion. Design Products & Applications is a controlled circulation journal, published monthly. Completed print or online registration forms will be considered for free supply of printed issues, website access and online services. Annual subscription for non-qualifying readers is UK £121, EU £215.25, Airmail £315 and single copy price is £18.60 monthly.

10: Measurement sensors Top 10 questions to consider when selecting a measurement sensor

12: Instrument data

06

Bring together all your instrument data with IS8000

14: Metrology Quality innovation in healthcare

Fasteners & Adhesives Special Report: 16: Fastener quality The ins and outs of fastener quality assurance

18: SIP panel adhesives Chemique Adhesives helps boost efficiency for garden room manufacturer

20: Automotive fasteners Choosing the right material for automotive fasteners

22: Adhesive thread locking Solar plant underpins production & saves costs with adhesive thread locking

24: Cyanoacrylate adhesives A big step forward in the technology of cyanoacrylate adhesives

14

Linear Motion Special Report: 26: High-load ball screws The motion control solution with higher load density

28: Counterfeit parts Does it fit your profile?

30: Electric motion & pneumatics Simplified electric motion with combined pneumatics

32: Linear actuators What criteria should I consider when selecting a linear actuator? 10,000 Average net circulation Jan-Dec 2018

Circulation Tel: +44 (0)1732 359990 Email: subscriptions@imlgroup.co.uk

34: Linear position tables Small positioning tables can deliver big performance

32 dpaonthenet.net 3


Paige’s Page

Networking in this new era: HANNOVER MESSE 2021 W Paige West, Group Editor

elcome to the April issue of DPA!

consists of an expo, a conference and

The conference programme starts on

networking. Under the keynote theme

Monday, 12 April, with a focus on eco-

“Industrial

pioneers

nomic policy issues: what effect does

“Industry needs trade fairs! Industrial

present their ideas and technologies for

COVID-19 have on globalisation? What

companies are eager for a place to pres-

the factories, energy systems and sup-

role does Europe play in the concert of

ent innovations, expand networks, dis-

ply chains of the future. Leading topics

world powers? How will transatlantic re-

cuss economic policy challenges, and

include digital platforms, Industry 4.0,

lations change, following the Trump era?

win customers,” says Dr. Jochen Köck-

IT security, CO2-neutral production, AI,

ler, Chairman of the Managing Board,

lightweight construction, and Logistics

From Tuesday to Thursday, the focus is

Deutsche Messe AG. “This requires a

4.0. Conferences and forums complete

on technological innovations and solu-

platform where challenges can be dis-

the programme.

tions. What role does AI play in industry?

Transformation”,

cussed, solutions presented, and networks expanded.”

How can data generate added value? All visitors can directly contact exhibitors,

What potential does hydrogen offer in-

speakers and other visitors. A personal-

dustry? Presenters include AI legend

So, when HANNOVER MESSE opens its

ised entry page supports this with a cor-

Toby Walsh; Eugene Kaspersky, founder

doors (virtually) this month, companies

responding dashboard that displays the

of IT-security company Kaspersky Lab;

will have the opportunity to bring their

companies, speakers and participants

and Claudia Kempfert from the German

products to life at the world’s leading

relevant to the respective visitor. From

Institute for Economic Research.

trade fair for industrial technology.

there, the visitor can initiate a direct con-

For exhibitors and visitors, HANNOVER

tact request and then connect via chat or

HANNOVER MESSE runs from 12

video call.

to 16 April 2021. Visit https://www. hannovermesse.de/en/ for more in-

MESSE is offering new options in the digital space. The digital show will focus on a

In the EXPO area, visitors have direct

comprehensive conference programme,

access to extensive product overviews

the digitisation of product presentations

from exhibitors. Best-case applications,

Do let us know what you think of the

and software-based business dating.

video tutorials, live streams, and video

issue and if there are any specific topics

chats enable them not only to learn about

you think we should be covering. Email

HANNOVER MESSE Digital Edition is the

specific solutions for optimising their pro-

me at paige.west@imlgroup.co.uk.

knowledge and networking platform for

cesses, but also to enter into direct ex-

industry, energy and logistics. The event

change with exhibiting companies.

4 dpaonthenet.net

formation.

Connect with us on LinkedIn. Join us on Twitter. Follow us on Instagram.


Motion-First Machine Solutions

chn -iX te n o i t Mo

es ologi

Trio’s motion-first approach to machine automation places the focus on optimising the performance of motion and complex kinematics, including robotics such as SCARA, to deliver truly optimal machine control performance. Contact Trio to find out how our motion-first engineering and Motion-iX technologies can deliver productivity to your machine.


Cover story: Sensor data acquisition

Wired or wireless: Which is the best technology for sensor deployment?

T

aking measurements from real-world processes has always been fundamental in data acquisition systems. Some would even argue that defining the points to be measured was the starting point from which systems were defined, and ultimately dictated what the deployed systems could and could not do.

sense. It is therefore understandable that engineers are interested in the deployment of wireless measurement systems, as these can often be installed much more quickly and cost effectively than those involving the laying and routing of additional wired infrastructure.

This is no less true as IoT technologies

measurements evolve over time, requir-

Deploying wireless sensing technology

are adopted in the transition to Industry

ing strategies to integrate pre-existing

involves compromises, however, and it

4.0. In fact, the adoption of these new

measurement points with new ones,

is the effect of these compromises that

technologies increases the demand for

which can often be physically removed

ultimately determines if a wired or wire-

more and more measurement data, as

from any pre-existing wiring or commu-

less architecture is selected and, if the

users include an ever-increasing number

nication links.

latter, which radio technology is most

of factors into the optimisation of their processes and equipment.

suitable. In such cases, the cost of adding the

This hunger to add new data brings its

normally, the cost of recovering the data

The case for wired infrastructure

own challenges and some significant

from these points – can often be the de-

The traditional way sensors have been

differences. The inherent flexibility of IoT

ciding factor in whether a desired sys-

connected to data acquisition systems

systems means that the required data

tem enhancement will make economic

is via wired interfaces, typically 4-20mA

new measurement points – or, more

6 dpaonthenet.net


Cover story: Sensor data acquisition current loops, but also, in the case of

pass traditional Remote Telemetry Unit

more specialised measurements, via

(RTU) and remote I/O devices, using pro-

Additional considerations for wireless systems

higher speed voltage-based systems.

tocols such as Modbus, but also USB

If the digitised information is to be trans-

These connections can carry power to

devices aimed at lab measurements and

mitted onwards using a wireless solution,

the sensors, are reliable, accurate, and

fieldbus-based data acquisition nodes,

other things must be considered:

offer faster measurement transmission

as well as more modern incarnations,

• How will power be provided to the

and update times than wireless systems.

such as IoT edge and gateway devices.

remote device? Simple devices

Furthermore, if correctly installed, they

The use of any such device starts to in-

may be able to operate from inter-

are both highly secure and insensitive

troduce compromises that must be con-

nal batteries for an acceptable peri-

to noise and other interference. These

sidered:

od, but many wireless devices may

characteristics come at a cost, however.

• Digitising data implicitly places a

still need cables to be laid to pro-

The cost of installation can be very high,

constraint on the precision that

vide power, and so may not com-

often involving alterations to buildings or

can be recovered. Does the remote

pletely avoid the costs of wiring.

digging trenches in which to lay the ca-

I/O device convert the data with

• How immune is the radio technolo-

bles. In some cases, cabling to a sensor

enough resolution (i.e. number of

gy to interference? How secure are

that is geographically remote may not

bits) to be able to extract the nuanc-

the transmissions from eavesdrop-

be physically practical. It is also usually

es in the measurement required by

ping, from malicious actors block-

not possible to use wired interfaces to

any upstream analytics?

ing signals, or impersonating devic-

mobile equipment, unless the range of

• Is the quality of the measurement

movement is limited and can be accu-

(accuracy, repeatability, noise im-

rately forecasted.

munity, etc.) sufficiently good?

es to provide false information? • Do the radios operate in controlled, licenced airspace, or do they use

• Transmitting data either serially or

licence-free frequencies? If the

The evolution of remote I/O

via a network takes a finite amount

latter, how is transmission to be

Telemetry has been used for many years

of time. This time is affected by the

guaranteed against accidental dis-

to alleviate some of these limitations.

amount of data to be transmitted,

ruption by other systems operating

By moving the physical sensor interface

the amount of protocol overhead

in the same frequencies?

closer to the sensor, digitising its data at

needed to encapsulate the data,

• What are the ongoing costs of the

that point, and then sending the digitised

the speed of the communications

communications provision? The

data onwards via a serial or network data

media being used, and the number

costs of wired systems are nor-

connection, we can significantly reduce

of other devices sharing the same

mally limited to the capital cost

the cost of installation – whilst also im-

connection. Can the data be recov-

(CapEx) of purchasing and install-

proving noise susceptibility, especially

ered quickly and sufficiently often

ing the equipment, but many ra-

where multiple sensor interfaces exist

enough to provide the necessary

dio-based systems involve an on-

at a single point. It also becomes possi-

insights and avoid the risk of sig-

going operational expense (OPEX),

ble to use radio to transmit the digitised

nificant measurement spikes being

for example, for cellular service

data, extending the reach of data acqui-

missed if they occur between sam-

sition systems to geographically remote

ples?

sites.

provision. • Can reliability be improved by

• In transmitting data across commu-

adopting systems with radio di-

nication networks, there is always a

versity with the chosen technology

The definition of ‘remote I/O’ is very

chance that a data packet may be

(i.e. automatic routing of signals via

broad. For the purposes of this discus-

delayed, received multiple times,

multiple path options, for example,

sion, we will apply it to any device which

or lost. How significant will any of

interfaces to sensors and digitises the

these events be to the process be-

resulting measurements before onwards

ing analysed or controlled?

transmission. This means we encom-

1552 hand-held plastic enclosures

Learn more: hammfg.com/1552 Contact us to request a free evaluation sample. uksales@hammfg.com • 01256 812812

as found in ‘mesh’ systems)? • What is the working range of the wireless technology in the environment in which it will be installed?

! w e n


Cover story: Sensor data acquisition

About the author: Paul O’Shaughnessy is Channel Sales Manager at Advantech IIoT. Before joining Advantech four years ago, following the acquisition of B+B SmartWorx, Paul spent the previous nine years developing and managing the channel network in EMEA and today manages the Device and Connectivity Group Channel Network in Europe for Advantech. Prior to that, Paul spent 10 years working as the European Market Manager for the Telecom and Datacom sectors in AMP (subsequently Tyco Electronics) for their Connector Business unit and three years as European Sales Manager for Betatherm (now Tyco Sensors).

Theoretical ‘line of sight’ maxi-

ically offer the best levels of resilience

passing the resulting digitised values

mum distances can be significantly

and speed of acquisition, but these

back through a single radio channel, will

longer than real-world “practical”

are increasingly becoming matched

be a more effective solution. This is espe-

distances, especially if transmitters

by newer fieldbus-based systems. For

cially true in cases where the edge device

are located in buildings, valleys or

lower-speed applications, wireless sys-

has intelligence, enabling it to provide

underground. Similarly, environ-

tems can offer a fast and cost-effective

front-end filtering and transformation of

ments where there is a lot of move-

way to add further measurement points

the raw sensor data prior to transmission,

ment of large metal assets (e.g.

within an existing installation, provided

and effectively not transmitting low-value

forklift trucks) and/or water-filled

they can operate effectively within their

repetitive data, but instead transmitting

objects (e.g. human beings), can

environment. They can be especially

significant events which implicitly have a

cause difficulties, due to the con-

useful in overlay applications, where

higher value as actionable information –

stantly changing radio absorption,

data is recovered from select points

but that’s another article.

reflection and interference profile.

within existing installations, and the ex-

• What public or shared infrastructure

isting systems are not easily interfaced

In many cases, the question should not

to third-party systems.

be a case of ‘either/or’. Often, the best

(e.g. cellular networks) will the data

results are achieved by mixing technol-

have to transit across to reach its des-

Things get more complicated when

ogies, optimising for each measurement

tination? How is access control per-

considering geographically remote data

point as you go. Advantech offers a range

formed, and data privacy ensured?

acquisition. The best technology to ap-

of wired and wireless sensor interfaces

ply will depend not only on the factors

as both standalone devices and integrat-

So, which is best?

outlined above, but also upon how many

ed within industrial computers and gate-

As you may already have realised from

data points exist at the location. With a

ways. Covering the full range of available

what has preceded, recovering data

small number of sensors, it may be sen-

technologies – including hardwired, field-

from sensors into IoT systems involves a

sible to use native radio-based sensors,

bus, serial, networked and radio via LTE,

balance of measurement performance,

like those designed for networks such as

NB-IoT, mesh, and LoRaWAN – it can

transmission speed, security, power,

NB-IoT, LoRa or SigFox. If more sensors

help determine the ideal combination of

range, and cost. It may not come as a

are present, it is more likely that some

devices to deploy in any application.

big surprise, therefore, to learn that there

form of input aggregating edge device,

is no ‘best’ solution. Wired systems typ-

accepting inputs from all sensors but

8 dpaonthenet.net

www.advantech.com


smart plastics Avoid unplanned downtime

Industry 4.0: smart plastics eliminate downtime Intelligent products give a maintenance alert ahead of time and can be integrated into standard predictive maintenance; smart plastics allow your equipment to run continuously as well as reducing maintenance costs.

igus.co.uk/smart


Feature: Measurement sensors

Top 10 questions to consider

when selecting a measurement sensor W hy do sensor suppliers ask detailed questions when it comes to solving a measurement task? With different measurement technologies and thousands of sensor variants from which to choose, the answers to these questions help suppliers to decide which sensor is best for the application, says Glenn Wedgbrow, Business Development Manager at Micro-Epsilon UK.

1. What are you trying to measure? Can you describe the application? Do you

as these ultimately define the real accuracy required in the application.

have a drawing?

When you call a supplier, it can often

4. What is the target material and its sur-

be difficult to imagine exactly what you

face condition?

want to do, especially over the phone.

If a supplier knows they are measuring

Pictures, drawings and photos can help

against metals, plastic, glass, rubber or

the supplier to understand the require-

other materials, this will again help to

ment you have.

define which sensor technologies could be used. You should also know if the sur-

2. Why is it important to make this

face appearance changes in terms of its

measurement? What is the benefit of

colour, shine, and temperature during the

acquiring the measurement?

measurement task. Is it rough, smooth, or

Understanding the need for the meas-

varied? This will also affect measurement

When it comes to solving a measurement

urement is crucial. It could be that the

performance.

task, sensor suppliers will often need to

supplier ends up recommending a

ask detailed questions about the appli-

sensor or system over and above what

cation. Whether you need to measure

you first imagined. However, if the im-

of the target?

distance, deflection, position, gaps, edg-

plementation of a solution leads to your

This question is all about the physical as-

es, temperature, surface profile or colour,

company saving thousands of pounds

pects of the target. By understanding the

there will be different measurement tech-

or tens of thousands of pounds per year,

geometry, a supplier can establish if the

nologies and thousands of different sensor

then surely it would still be worth con-

target is large enough for a specific sen-

variants available from which to choose.

sidering?

sor to be used, or if a small sensor spot

By asking detailed questions about the

5. What is the shape, size and movement

size is required.

measurement task, a supplier can use

3. What are the technical requirements?

these answers to work out which technol-

How far can the target move, how

6. How much space is available to mount

ogy and sensor are most appropriate for

fast does it travel and what tolerance

a sensor? What are the restrictions

their application.

needs to be achieved?

above, below and around the target?

As a supplier, Micro-Epsilon’s sensors

This can often be overlooked, but if you

Here are the top 10 questions you should

measure displacement – changes in

are trying to fit a sensor into a small

consider when enquiring about a sensor to

position, thickness, etc. It also meas-

space (perhaps it is a retrofit or an up-

solve your measurement task. Micro-Ep-

ures temperature and detects/monitors

grade), knowing how much room is avail-

silon always asks customers these ques-

colour. Understanding the boundaries of

able can often influence the type of sen-

tions because it wants them to receive the

the measurement helps to identify pos-

sor that can be used. Sometimes it might

right solution. Perhaps you should check

sible sensor technologies. Tolerances

be possible to move the sensor further

whether your suppliers are doing the

are probably the most important infor-

away from the target than at first thought

same?

mation you can provide to the supplier,

and look through apertures or windows.

10 dpaonthenet.net


Feature: Measurement sensors 7. What is the ambient environment for

and connectivity of the sensor(s) are im-

sor specification, for example, providing

the sensor and target? These can of-

portant factors to consider. What output

you with a non-standard measurement

ten be different.

signal you need is also important (e.g.

range, target specific calibrations, or dif-

By answering the above question, the

analogue, digital, fieldbus).

ferent cable lengths. The company can

supplier should now start to have a better idea of which sensor technology

even create a bespoke sensor for OEM 9. Have you defined a budget for solv-

requirements. However, these can take

can be used; however, there still may

ing the measurement task?

time and so it is best to talk to the sup-

be more than one option to consider.

The answer to question two can help

plier in plenty of time to help enable the

Make sure you think about the location

define a budget. However, if the required

right solution is chosen, rather than one

of both the sensor head and, if applica-

solution calls for more money than you

which ‘fits’ into a shorter timescale.

ble, the controller. Key factors here will

thought, how can it still be justified?

be ambient temperature, cleanliness

An incorrectly specified sensor chosen

For more information, please call the

of the environment (e.g. dust, steam or

to meet a budget may just be money

Micro-Epsilon sales department on +44

oil), pressure, and vacuum, as these can

wasted if it doesn’t measure as required.

(0)151 355 6070 or email info@micro-

affect measurement performance and

Before setting a budget, it can be ben-

epsilon.co.uk.

sensor accuracy.

eficial to talk to the sensor supplier to help determine what a realistic budget

8. What quantity is required? Is it a sin-

should be. Micro-Epsilon will always aim

gle measurement, multiple measure-

to work to your budget, but if that results

ments on a single target required for

in a compromised sensor selection, we

multiple machines, or a combination

have to ask, is that the best decision for

of all?

your company over the long term?

Left unanswered, this question could have serious implications for the success

10. When do you need a working solu-

of the project. Having just one sensor to

tion?

measure is easy to integrate. However,

Most catalogue sensors are available

if you are measuring multiple positions

from stock, but Micro-Epsilon also has

at the same time, then synchronisation

the ability to customise parts of the sen-

LEO-RECORD

About the author: Graduating from the University of Central England with a 1st Class Honours Degree in Engineering, Glenn Wedgbrow has over 25 years of experience in the engineering industry. Specialising in precision sensor measurement technologies, he has been delivering measurement solutions, including position, movement, temperature and colour inspection, to all industries throughout the UK & Ireland. With in-depth knowledge and expertise in solving measurement applications on almost all materials with the use of innovative sensors and systems, Glenn has provided numerous solutions for leading multinationals and medium and small-sized businesses, liaising with design engineers and UK manufacturers in almost all industries, from metal, rubber and plastic to automotive and aerospace.

MAXIMUM CLASS ACCURACY

AND REPEATABILITY Pressure ranges from -1…1000 bar Accuracy class 0,05 %FS Event-controlled or interval-based recording Up to 57,000 measuring points ATEX option available

keller-druck.com


Feature: Instrument data

Bring together all your instrument data with IS8000 W

ith the drive to enhance the energy efficiency of products as diverse as electric vehicles, robots and household appliances, development engineers find themselves faced with the need to analyse a wealth of both mechanical and electrical data.

overall view of system performance. How-

Ensuring that instruments can work to-

ever, operating these multiple instruments

gether as a single measurement suite

can be difficult due to the different user

makes for coherent measurements dur-

interfaces and the need to correlate the

ing product development. For example,

timing of the various input signals.

data from the Yokogawa WT5000 power analyser and DL950 ScopeCorder are

The lack of time synchronisation of data

time correlated with less than 10μs error,

makes it difficult, to find correlations be-

using IEEE1588 technology.

tween measurements – and engineers also need to operate and learn different

Working with these devices, IS8000 can

The main instruments used are oscillo-

types of software. The result is that de-

store up to 128 channels of data in real

scopes, which offer high sample speed

velopment cycles lengthen, leading to

time on a PC, at a sampling rate of up to

and in-depth views of waveforms, high-

increased time to market.

10MS/s (at eight channels), via a 10 Gi-

speed data acquisition recorders, such

gabit Ethernet connection. This makes

as the Yokogawa DL950 ScopeCorder,

To meet this challenge, Yokogawa has

longer recording times possible for high-

which offers a large number of channels

produced its IS8000 integrated software

speed, multi-channel inputs, such as gate

and the ability to take measurements over

platform, which provides tight integration

signals and switching waveforms of mul-

long periods of time, and power analys-

of the timing, control, and data collec-

ti-phase inverters.

ers, which offer accuracy in power meas-

tion from several instruments. With one

urements.

software suite to set up and control all

IS8000 can be used to operate remotely

the instruments needed, development

Yokogawa’s high-precision power analys-

Developers often need to bring in these

engineers can start measuring data more

er, ScopeCorder and oscilloscope, which

measurements simultaneously to give an

quickly and efficiently.

can all be monitored and configured from

12 dpaonthenet.net


Feature: Instrument data the software. The IS8000 simultaneously

3-3, 3-11 and 3-12 standards using the

mechanical movements of the robot arm

provides the precise power analysis and

WT5000 precision power analyser, this

and manipulators.

the accurate waveform.

add-on allows users easily to set the con-

In turn, this makes it easier to debug and

ditions and output the test report without

Some manipulators may be specific to a

any specialised knowledge

bespoke production task, and these may

analyse data by viewing all measurements

have to be revalidated for use on a par-

on a single display, while it also allows

Ideal for many industries

ticular robot model. Multiple signals and

data to be shared easily throughout an

The increasingly complex solutions and

inputs from ScopeCorder are required to

organisation.

products that manufacturers are devel-

determine the best combination between

oping to meet the need for more energy

the robot’s position and performance. To

Storing data in one format and location

efficiency are formed of interdependent

achieve this level of insight into the sys-

has never been simpler. IS8000 gives

electronic, electrical and mechanical

tem, a combination of signals is required –

trusted data by synchronising measure-

subsystems. With its ability to coordinate

high-speed camera, voltage, current and

ments across multiple instruments using

measurements from instruments of differ-

multiple position and I/O control signals.

an IEEE1588 time base.

ent types, the IS8000 is ideal for developing applications such as solar, wind and

Using the IS8000, camera images can be

Using the IS8000 leads to greater efficien-

hydro power, where there is a need to

time synchronised with waveforms and

cy, as it ensures less time is spent devel-

view and compare waveforms from mul-

control signals. Slow-motion playback

oping test methods and more time devot-

tiple instruments.

allows engineers to see any difference

ed to gathering actual test data.

between what the design is expected to As renewable energy systems must main-

achieve and the actual performance.

Expand as needed

tain their efficiency throughout the differ-

With today’s fast-evolving technology,

ent power conversion stages, develop-

Easy terms

software cannot stand still – it must have

ing these solutions means that multiple

IS8000 is available through an annual li-

the ability to expand. This is what IS8000

measurement points are required. This

cence, which gives users the latest ver-

was designed to do. The suite has some

ensures that engineers have the insight

sion of the software for the duration of

standard functions, such as remote moni-

they need into the dynamic behaviour of

their subscription. Users can purchase the

toring or remote device setup, but also has

these systems, allowing them to validate

software for as long as they need it, keep-

a number of add-on functions, designed

efficiencies.

ing their initial investment to a minimum.

power and waveform data, or to add anal-

As the IS8000 can easily synchronise

Alternatively, users can opt for a perpetual

ysis functions or a report generator.

waveforms from multiple instruments, it

licence. This is a one-time purchase that

gives engineers an easy view of the com-

can be used indefinitely, allowing users

One of these options is a high-speed

ponents of the solution, such as control

to upgrade for up to five years for major

camera add-on. The IS8000 synchronis-

units, solar panel arrays or generators.

software revisions, free of charge, follow-

es high-speed camera images with the

The analysis of long-term records can

ing purchase.

related current, voltage, and control sig-

be achieved by manipulating waveform

nals, with slow-motion playback allowing

views with the suite’s zoom and pan con-

This licence is suitable for users who do

the actions of the product or system to

trols to see the detail of what is happening

not plan to change their equipment envi-

be seen alongside the results. The high-

to the energy waveforms.

ronment at the time of installation.

the trigger signal only, meaning that the

Another application where the IS8000

For further information on the IS8000

video image and waveform data are cap-

would be useful is in the analysis of ro-

integrated measurement software,

tured individually. The IS8000 synchro-

botic welding control. Robot systems are

please visit: http://bit.ly/3qQ3OEt

nises with each instrument at any point

increasingly applied in manufacturing sys-

in time, allowing physical events to be

tems, with welding being one of the prime

matched exactly to the waveform timings.

uses of robotic automation.

The FFT and Math add-on allows engi-

Through the use of sensors, robots are

neers to measure up to 16 FFT processes

becoming increasingly adept at detecting

for a wealth of analysis functions, giving

joint interfaces and welding irregular, in-

automatic calculation of frequency and in-

consistent or difficult to access joints. Op-

tegrated value and filter processing.

timising the robot’s performance requires

to connect multiple units and synchronise

speed camera and DAQ systems share

simultaneous recording of multiple signal Another option is the IS8011/IS8012

types, from the high current of the pow-

Harmonic/Flicker Analysis Software. De-

er supply to the signals to and from the

signed to perform harmonic and flicker

sensors, control unit and communications

tests in accordance with IEC61000-3-2,

network, including information about the

dpaonthenet.net 13


Feature: Metrology

Quality innovation in healthcare D

uring the coronavirus pandemic, the medical industry demonstrated its resilience and ability to bring new products to market quickly. As we look to the future, how can medical device manufacturers streamline the journey from development to production, to enable future innovations in healthcare? Here, Mike G John, Head of Engineering at industrial metrology provider The Sempre Group, explains how integrating metrology into every stage of medical product development can accelerate the journey to market.

Metrology is fundamental in gathering evidence that the medical device meets safety and performance requirements for the patient, so manufacturers should prioritise developing an effective quality management system when producing new devices.

Bottlenecks Medical device manufacturers will often validate every single part in device pro-

While many industries slowed down

While speed is vital to bringing innovative

duction to ensure regulatory compliance.

during the pandemic, the medical and

medical devices to market quickly, manu-

While this is an important step, it can stall

healthcare industries were under pressure

facturers cannot compromise on accura-

development and slow the journey to

to act quickly, racing to develop vaccines

cy and quality. Regulatory bodies require

market.

and respond to equipment shortages. In

manufacturers to provide accurate and

the future, the medical industry is likely to

traceable information from every step of

Manufacturers often treat production

be presented with more challenges and

the product’s cycle. This evidence proves

and quality as two separate entities. As

the sector must continue to innovate to

that the medical device meets its intend-

a result, they don’t use measurement

provide patients with the care they need.

ed purpose and is safe for patient use.

equipment until late in the manufacturing

14 dpaonthenet.net


Feature: Metrology process, when components are manually

components, so manufacturers require

idly identify geometric dimensioning and

taken off the production line to be meas-

nano- and micro-precision non-contact

tolerancing (GD&T) from models, identify

ured, creating costly bottlenecks.

measurement equipment for accurate

critical dimensions and input all the data

validation. These systems, such as Sen-

from the ballooned drawing, populating

As well as being a much slower approach,

sofar 3D optical profilers, offer three dif-

a final report. Manufacturers can auto-

by this stage, it’s often too late to rectify

ferent optical techniques to provide highly

matically compare the original ballooned

any issues. If the product is found to be

detailed surface inspection and analysis.

drawing with the new report, offering full

defective, time and energy have already

visibility to the manufacturer and devel-

About the author:

oper.

Mike G John CEng MIMechE is the Head of Engineering at The Sempre Group. His experience working in the aerospace, medical and automotive sectors enables him to develop technical solutions for customers and add value to their business.

been wasted on a product that could

While it’s important to gather this level of

have been scrapped or saved earlier in

detail during part development, it is not

the production process. The manufactur-

easy to upscale the process for produc-

The medical industry has proven how

er has also lost the opportunity to identify

tion – more detailed information requires

rapidly it can adapt development pro-

the root cause of any problems so they

more time. To speed up validation, without

cesses and assembly lines to produce

can be addressed.

compromising on detail, manufacturers

lifesaving medical devices. By bringing

can use a rapid measurement solution in-

metrology into the development and pro-

Metrology from the start

tended for the shop floor, such as a Micro-

duction process, medical device manu-

By considering the role of metrology ear-

Vu optical CMM, to check every part for

facturers can remove bottlenecks caused

lier in the process, manufacturers can

quality, using a more detailed system for

by traditional forms of measurement and

develop a scalable, traceable process

periodical analysis when needed.

improve traceability to ensure regulatory

and avoid any bottlenecks that can slow down production.

compliance, enabling them to bring prod-

A fully traceable process

ucts to market even more quickly.

Proving compliance with regulatory bodWhen selecting equipment to measure a

ies requires manufacturers to document

For more information on how metrology

device during the development phase, it’s

every stage of the product’s lifecycle.

can help medical device manufacturers

best practice to think about measurement

Implementing a fully digitised approach

streamline validation and production,

on the shop floor. If a developer chooses

to metrology from the outset enables

visit www.TheSempreGroup.com.

to verify with a slower, more tactile ma-

manufacturers automatically to collect

chine, it becomes more difficult to switch

vital data that ensures full traceability and

to a different system later in production.

influences the success of production.

By selecting measurement equipment that can easily be upscaled to use on the

We still see many manufacturers gath-

shop floor during production from the

ering data and inputting it into isolated

beginning, bottlenecks are less likely to

documents, such as Excel spreadsheets.

occur.

Manually inputting data from metrology equipment increases the risk of human

A growing number of manufacturers are

error, makes it more difficult to find histor-

introducing automation to the production

ic data, and creates data gaps so that the

line to increase productivity. Collabora-

process is never fully traceable.

tive robots can safely, quickly and accurately complete repeatable tasks with-

A better alternative is an automated qual-

out the need for breaks. While this can

ity management system (QMS), as they

accelerate the manufacturing process, if

offer manufacturers an all-in-one solu-

manufacturers do not include metrology

tion for quality management, by collect-

in plans to digitalise, they lose the time

ing and storing data at every point, from

they gained earlier in production. Instead,

drawing to final product. They eradicate

manufacturers can program a cobot to

the need for time-consuming paperwork

pick and place parts for measurement,

and filing, allowing developers easily to

speeding up validation and moving staff

communicate important quality informa-

away from monotonous, time-consuming

tion across the supply chain.

tasks and into more productive roles. Manufacturers can use automated sys-

All in the detail

tems to streamline reporting processes

Medical devices are becoming more

that are often time-consuming when

complex – manufacturers can now pro-

completed manually. High QA Inspection

duce very intricate parts, such as drill

Manager, for example, allows develop-

bits, dental implants and surgical tools for

ers automatically to generate first arti-

orthopaedics. Tactile measurement may

cle inspection (FAI) reports to verify the

compromise the quality of these smaller

product’s design. The software can rap-

dpaonthenet.net 15


Feature: Fastener quality

The ins and outs of fastener quality assurance F

asteners play a crucial role in an assembly – yet quality standards are often overlooked by many businesses. If a fastener is not made to specification, manufacturers may be unable to assemble their products, facing long lead times before the right parts arrive.

ture or friction. For example, powertrain fasteners in a vehicle are commonly coated with zinc to enable them to resist corrosion, heat and oil. Polytetrafluoroethylene (PTFE) coating is common in the aerospace and oil and gas industries, as it is lightweight and provides

In a worst-case scenario, manufacturers

we do to be sure our fasteners are the

high corrosion resistance. Quality pro-

risk sending poor-quality products out to

right ones for the job?

fessionals should assess whether the

the market, risking loosening or compo-

coating thickness is uniform across the

nent failure. This would result in a prod-

Check your measurements

fastener and within stated tolerances – if

uct recall, an expensive, extensive and

The most common problem with fasten-

it is not, the part could cause problems

embarrassing process, which can signif-

ers is that they don’t match the drawing

later.

icantly damage a company’s reputation.

– the dimensions, thread, head or length

Here, Brian Vince, Group Quality Manager

is incorrect. This is a relatively easy issue

Hardness testing can also detect quality

at TFC, shares insight into common fas-

to pick up: taking a measurement using

issues. Quality specialists can assess

tener problems, and how to avoid them.

a vernier or a micrometer will identify

tensile strength and perform flexure or

around 90 percent of problems. If need-

compression tests to check the material

There are numerous reasons a fastener

ed, the next step would be to measure

has the desired properties. This will pre-

may not meet the required specifica-

the component using a shadowgraph,

vent a fastener from going into an appli-

tions. Perhaps there was a mix up dur-

which illuminates a shadow of the com-

cation where it is too hard and will snap,

ing picking or labelling, and the fasten-

ponent that can be zoomed in on to iden-

or too soft and will bend.

ers have been delivered in an unmarked

tify any non-uniformities. Quality teams

or incorrectly labelled bag. Maybe the

can also use thread gauges or a shadow-

Dependent on the component at hand,

wrong ISO standard of part has been

graph to check a fastener’s thread.

other tests can be performed, such as

delivered, or the material is not tem-

load testing for springs, checking the

pered when it should have been. Many

Finishing

hardness of rubber parts with a durom-

common errors are almost impossible to

Many fasteners are coated to improve

eter, or testing the smoothness of the

detect with the human eye, so what can

their resistance to corrosion, tempera-

bolt. If all testing is coming up fine, but

16 dpaonthenet.net


Feature: Fastener quality a manufacturer experiences problems

more suitable for the application.

with quality during assembly, inspecting

tions and establish what quality meas-

About the author:

ures they have in place. A good starting

Brian Vince is the Group Quality Manager at TFC. He has served in this role for over 10 years and has built up a wealth of hands-on experience, commencing his TFC journey as a quality inspector in 1997. With the help of TFC’s dedicated quality team, years of procedural and process improvements under his belt and a passion for facts and figures, Brian helps ensure that customers receive the correct parts, at the correct time.

the part under a microscope means you

Re-engineering

point is ISO 9001, but there are other ISO

can interrogate the problem at a very

Testing methods can also be used to

and AS standards, as well as OEM ap-

granular level to identify what is wrong.

help re-engineer a component. For ex-

provals and lot traceability certification

ample, if you are not sure what material

that you can check. Certain industries

Material

your fastener is made of, PMI testing

have more rigorous certifications, such

To check that the fastener is made from

could identify it. Combining this with

as Aerospace AS9100:2016/9120:2016

the required material, quality profes-

measurement techniques that provide

standards (AS 9100D and AS 9120).

sionals can use positive material iden-

the physical characteristics of the fas-

tification (PMI) testing. This technology

tener could enable you to work back-

Good communication and full tracea-

analyses the full chemical composition

wards to identify an alternative part that

bility between distributor and supplier

and grade of a metal or alloy, to ensure

would work in the same application.

are crucial. Consolidating your suppli-

the material’s properties match specifi-

ers into one vendor managed inventory

cation. Material identification is particu-

While most fastener manufacturers have

partner, or reducing the number of ven-

larly important in the oil and gas sector,

the equipment to interrogate fastener

dors, will make managing quality more

where a material mix up could lead to

quality fully, not all distributors pos-

straightforward.

catastrophic failure. For example, a

sess the same advantage. If there is a

stainless steel retaining ring in a subsea

non-compliance report, it pays to work

TFC does all quality testing in-house to

drive shaft, instead of a specified Inconel

with a distributor that tests in-house,

make sure that customers are receiving

X-750, could mean drilling operations are

rather than outsources, as external qual-

the correct parts, to specification. The

forced to halt months before schedule.

ity testing can take four to six weeks

company checks parts, so its customers

compared with next day.

don’t have to.

Communicate and collaborate

If you need a supply of fasteners checked

that is causing quality problems. In this case, your supplier may be able to sug-

Manufacturers should be rigorous with

TFC know. For more information, visit

gest an alternative option that will be

their suppliers – ask to see their certifica-

https://www.tfc.eu.com/.

If all testing confirms that the part is to specification, it may be a design issue

in a way not mentioned in the article, let

M8 12 contacts

Cable & panel mount connectors

IP67

PUR-/PVC cable

www.binder-connector.co.uk


Feature: SIP panel adhesives

A room with a view: Chemique Adhesives helps boost efficiency for garden room manufacturer B

ased near Gloucester, Future Rooms designs, manufactures and installs a range of garden rooms to create additional family or leisure space. In 2019, the company decided to start building its own SIP panels on site, with the assistance of Chemique Adhesives.

A SIP Panel, or sandwich panel as it is also known, is an insulating layer of rigid core insulation adhered to two layers of structural board. It is then pressed together under a uniform force until the

Discover more: www.rittal.com/vxse

VX SE free-standing enclosure system Because often, simple is best


Feature: SIP panel adhesives adhesive has set, resulting in an ex-

dispensing system. The method also

Chemique Adhesives also has a team

tremely strong structural insulated pan-

reduces waste and is much cleaner and

of service engineers on hand, providing

el (SIP).

user friendly than more traditional meth-

assurance that in the event of a break-

ods of manual application.

down, this can be dealt with quickly and

Until recently, Future Rooms was buy-

efficiently. The company’s Total Service

ing SIP panels that were ready built,

The adhesive used with the rake sys-

Package includes tailor-made adhe-

from an outside source. Then, in 2019,

tem is Solfre1 – a single component,

sive solutions, combined with full engi-

the company decided to take full con-

solvent-free

product.

neering and technical support. Service

trol of its production costs and build its

Solfre1 is suitable for a variety of appli-

contracts are also available for added

own SIP panels on site, which are used

cations, such as construction panels,

peace of mind.

in the manufacture of their garden room

truck building, caravan panels, and

and office range.

many similar uses where a permanent

For further details on Chemique

structural bond is required. Its unique

Adhesives’ Solfre range or any of

“We wanted a partner that could of-

formulation provides superior resist-

its adhesive application equipment,

fer a complete package to assist us in

ance to chemicals, heat, humidity and

please get in touch at https://www.

manufacturing the panels,” explained

thermal shock.

chemiqueadhesives.com/en/contact.

polyurethane

Richard Kocerhan, Owner and MD of Future Rooms. “Chemique were able to provide extensive knowledge in panel lamination, recommend the correct adhesive, as well as supply the most suitable adhesive application equipment for the job.” “Following an initial meeting, it became apparent that a degree of semi-automation was required for making the panels, and so we trialled our portable rake system in conjunction with a single-component, moisture-curing polyurethane adhesive from our Solfre range,” said Phil Carter, Business Development Manager at Chemique Adhesives. This was the perfect combination and allowed Future Rooms efficiently to produce high-quality laminated panels with an easy-to-use and cost-effective

www.rittal.co.uk


Feature: Automotive fasteners

Choosing the right material for automotive fasteners 2

030 is the official year in which all petrol, diesel and hybrid cars will come to an end in the UK – no new versions of these cars will be produced. There is now more pressure than ever before for car manufacturers to produce cleaner, more efficient cars, leading to industry-wide discussions about lightweighting.

Offering the ability to increase range and performance in electric vehicles, lightweighting has become the new buzz word in automotive design, pushing engineers and designers down to the very last gram. It’s no surprise that fasteners

use in joints that are subject to varying

Titanium has also made its way into the

are at the forefront of this phenomenon.

temperatures. They also lower the risk

automotive industry from aerospace.

On their own, fasteners don’t account for

of increased stresses in components, or

This exotic material is lightweight,

much in terms of weight, but collectively,

dropped clamp load from different ther-

strong, and offers excellent thermal and

they make up a big proportion of a car’s

mal expansions.

corrosion properties, allowing car manu-

weight.

facturers to keep the strength properties However, while aluminium fasteners

of steel and stainless, with the added

When thinking about how to save weight,

have a number of benefits, there are

benefit of reducing weight. The only

choosing the right material for fasteners

other factors to consider, such as the

downside is the price. The costs are a lot

is the first step. Traditionally, fasteners in

environment in which they will be used

greater than steel or stainless, and these

the automotive industry have been man-

and the dissimilar metals with which

added costs in manufacturing are sub-

ufactured from mild and hardened steel

they will come into contact. One of the

sequently passed on to the customer.

because they are cheap to produce and

major concerns is galvanic corrosion,

offer excellent mechanical properties.

a process that happens when two dis-

But what if metals weren’t the only fas-

But they aren’t particularly lightweight.

similar metals are brought into electrical

tener solution? After all, an awful lot is

contact via a conductive fluid, such as

going on under the bonnet of a car, from

So, with the increased focus on fasten-

water. This is common in the automo-

car oil to brake fluid, heat and humidity,

ers in recent years, more exotic metals,

tive industry, where aluminium bolts are

meaning that the environment to which

such as aluminium, have begun to trickle

used in conjunction with steel parts. The

fasteners are subject is extremely harsh.

down from the aerospace industry and

lesser noble metal, aluminium, electri-

As this element of the car is so critical

onto the factory floor of most car man-

cally contacts the higher noble metal,

from a safety standpoint and for vehicle

ufacturers.

steel, resulting in the aluminium cor-

reliability, metal fasteners have been the

roding. This damages the component

go-to for many years. However, they

There are now more than 500 different

and makes it highly unsuitable for are-

come with downsides: they are ex-

types of aluminium, offering varying

as of the car that are likely to come into

tremely prone to corrosion and, with all

characteristics, from high-strength to

contact with water. There are, however,

the fluids and chemicals in a car engine,

high heat-resistant properties. Alumin-

ways to counteract this. Plastic wash-

this can be detrimental to the reliability

ium bolts, for example, offer numerous

ers, for example, can break the contact

and safety of the car.

benefits: they are lightweight, cheap,

between the two dissimilar metals.

easily recyclable and strong – perfect for

20 dpaonthenet.net

That’s why the automotive industry is


Feature: Automotive fasteners increasingly turning to plastics to save

Not only does using different types

these to a low head cap screw reduces

weight. They can now be chemical and

of materials help the industry to save

weight, and replacing the drive type with

acid resistant, dealing well with moisture

weight, but using different types of fas-

a special drive, such as a TORX, allows

and heat, and are incredibly lightweight.

teners does too. Pop rivets or blind rivets

car manufacturers to generate the same

The problem with plastics is that they

are a perfect example. As they are often

amount of torque required to fasten

are not typically known for being strong.

made from stainless steel or aluminium,

parts together, but save weight with re-

However, with recent advancements in

they can hold very thin types of material

ductions in head heights.

technology, they are now becoming as

together, with incredible strength retain-

strong as some metal fasteners; the auto-

ing properties – all whilst being incredi-

The obvious solution for a greener fu-

motive industry just has to be smart with

bly lightweight.

ture in the automotive industry comes

the plastics it chooses. Fibreglass epoxy

down to car manufacturers and the fas-

is popular because it is flame resistant. It

Another fastener gaining popularity is

tener industry working together to help

is a composite material that is made up

thread-forming screws. These ingenious

make the right choices; whether that’s

of woven fibreglass cloth and an epoxy

fasteners can join multiple layers of ma-

choosing a different fastener altogether

resin, providing it with good strength-to-

terial, without the need for tapped holes.

or choosing standard fasteners in new

weight ratios similar to some aluminium.

Numerous combinations of materials

advanced materials. Careful considera-

Another favourable plastic is Thermo-

can join together, saving multiple nuts

tion is required when making cars lighter,

plastics Polyurethane (TPU), as it is a very

and bolts that would have been used

and it can’t be at the expense of passen-

strong product and is significantly lighter

previously. As more and more car man-

ger safety.

than metal, as well as being resistant to

ufacturers use aluminium panels, com-

chemicals, moisture and UV radiation.

bined with composite panels and steel

That’s why Accu stocks a wide range

panels, it’s the thread-forming screw

of both rivets and thread-forming fas-

that is making this all possible.

teners, specialising in stainless steel

Therefore, plastic fasteners are more versatile than ever, and they can provide a wide range of benefits. With the help

and also offering more exotic materials Another great and simple way of saving

with its custom manufacturing service.

of the fastener industry, the automotive weight is to think about the head of a Xover™ industry Solenoidjust Valve 21_Layout 1 15/02/2021 09:49 1 needs to do its research on screw.Page Normal-sized socket cap heads

For a look at Accu’s range, please visit

N

EW

which plastic is suited to the application.

https://www.accu.co.uk.

are often used; however, changing

Xover Solenoid Valve ™

Internal Pinch Tube Isolation Valve ● Low Internal Volume: 11 µL Total ● Carryover Volume: 3.7 µL ● Long, Maintenance Free Life ● Chemically Inert Wetted Materials ● Low Power Consumption, Continuous Duty The Lee Company is proud to announce the Xover™ solenoid valve, a groundbreaking internal pinch-tube solenoid valve designed to switch quickly and efficiently between samples, reagents, cleaning solutions or calibrants. Featuring unmatched reliability and an exceptionally low carryover volume of just 3.7 µL, Xover is ideal for critical applications in flow cytometry, gene sequencing, in vitro diagnostics, urinalysis, and hematology instruments.

For more information visit www.leeproducts.co.uk Tel: 01753 886664

Fax: 01753 889588

email: sales@leeproducts.co.uk

Lee Products Limited, 3 High Street, Chalfont St Peter, Gerrards Cross, Bucks. SL9 9QE

Innovation in Miniature


Feature: Adhesive thread locking

Solar plant underpins production & saves costs with adhesive thread locking T

hreaded assemblies, subjected to load and vibrations, are often locked against self-loosening by either a mechanical locking device or an adhesive thread locker – or a combination of both. The merit of this is easy to understand when the assembly is in a motor-driven machine, where obvious vibration can cause an unlocked nut and bolt gradually to unwind. But what about a completely static object, like a solar panel? Surely, that’s a good example of a bolt-downand-forget application? The short answer is no, it is not. Panels are exposed to a variety of weather conditions, and wind will cause enough vibration for the panel mounting bolts to

speed of application, but also the ex-

version gave the advantage of securing

loosen over time. Additionally, the pan-

tended service life of locked assembly.

all threaded assemblies, without having

els are subject to thermal cycling; they

to dismantle them.

are directly exposed to sunshine, shade

The adhesive proved to be the best

and night-time temperatures, as well

choice as it is the only thread locking

The product the company chose was

as seasonal variations. The metal bolts

method that addresses the gap that ex-

LOCTITE® 290 from Henkel, a liquid

therefore expand and contract with the

ists between the threads of the nut and

medium/high-strength thread locker for

changes in temperature, leading to an

bolt. Although imperceptible to the na-

locking and sealing threaded fasteners.

additional loss of torque.

ked eye, this gap is still large enough to

Because of its low viscosity and capil-

allow side-to-side movement of the bolt

lary action, the adhesive actively creeps

A Japanese solar power plant decided to

within the nut when it is exposed to wind

in between the threaded surfaces. This

take action to prevent this from happen-

movement; regardless of whether a me-

meant engineers could apply the adhe-

ing when it assessed the loss of revenue

chanical locking device has also been

sive to the nuts and bolts in situ, saving

for the time that panels were out of com-

fitted. This problem is exacerbated by

significant maintenance time in the pro-

mission, and the increased maintenance

thermal cycling.

cess, and creating assemblies that were

costs involved in rectifying bolt failure.

both long lasting and corrosion resistant.

The solution was a specific adhesive

The adhesive thread locker completely

thread locker that could be applied to

fills the gap between the threads and

For a complete guide to thread locking,

already assembled nuts and bolts.

solidifies into a tough thermoset plas-

download Henkel’s e-book here:

tic between the two metal surfaces in

Download E-Book - How to stop

The company chose to lock its thread-

the absence of air, preventing any mi-

fastener loosening - Henkel

ed assemblies with an engineering

cro-movement. Generally, the adhesive

Adhesives (henkel-adhesives.com)

adhesive rather than a mechanical de-

is applied during installation or main-

vice, such as a spring washer, because

tenance while the fastener is being as-

and see the technology in action here:

it proved to be the most efficient. This

sembled, but as the Japanese energy

Don’t Let A Little Fastener Become A

was not only measured by the ease and

company discovered, a wicking grade

Big Problem - YouTube

22 dpaonthenet.net


moneo – simply made for you! Software to assist your industrial evolution - Nothing more. Nothing less. One platform for all digitization requirements Experience the ease of IT-supported process optimization with moneo. moneo is the all-in-one platform for everyone who wants to interact with their system in a predictive manner, evaluate information and adjust parameters. All in one software. Take the next step in digitization. Without detours, without technical hurdles, very simple and straightforward. Are you ready for industrial evolution? It's already happening, with moneo.

moneo|configure SA (SA: Stand-Alone) supports you with the parameterization of your IO-Link devices and ifm IO-Link masters. The visualized representation in the cockpit simplifies setup and error diagnosis. The simple management of parameter data sets accelerates the integration of new sensors and is supplemented by the integrated online connection to the IODD finder. Ready for more? Then start your digital evolution now with moneo, the new, open and industry-independent IIoT platform from ifm.

moneo.ifm


Feature: Cyanoacrylate adhesives

A big step forward in the technology of cyanoacrylate adhesives part, to a proprietary new “crackless” manufacturing process, this new portfolio of engineering adhesives – focused on ‘by-the-dot’ bonding applications – breaks new ground. Born2Bond

cyanoacrylate

adhesives

overcome many of the performance and application limitations of existing products. They also facilitate faster, smarter production processes while prioritising user safety and sustainability. The days of compromise in “instant” adhesive choice may be over. Some of the implications for your production include higher adhesive strength,

C

the ability to gap fill, and operating tem-

yanoacrylate adhesives (CAs) have been around since the 1950s, and from the 1970s, they have become a common household product. Today, manufacturers are increasingly using CAs and rely on them to bond plastic, metal, ceramic, rubber, wood and other substrates in many types of assemblies.

peratures of up to 120°C. There are lowodour, low-bloom formulations without performance compromise, with very fast cures and low irritability. High-impact resistance and toughness feature, and one product is flexible with >200 percent elongation. In the Born2Bond range, there are cyanoacrylate adhesives with

Cyanoacrylate adhesives are unique in

There are others: octyl monomers are

long pre-assembly open times, but with

that they provide fast curing and high-

used to make medical products for

the characteristic “instant” cure upon

strength bonding to various substrates,

bonding skin, for example.

assembly. The first odourless, light-cur-

without the need for a separate heat or

ing cyanoacrylate adhesive is also ISO

energy source. Here, Peter Swanson,

Despite their popularity, up until now,

10993 tested and is suitable for consid-

Managing Director at Intertronics, ex-

cyanoacrylate

had

eration in the assembly of medical devic-

plains how the new Born2Bond range

drawbacks based on brittleness, limited

es. The range features safer products,

represents a big step forward in cy-

temperature and moisture resistance,

with fewer or no label hazard symbols.

anoacrylate technology.

and other physical disadvantages. There

adhesives

have

are bad perceptions around odour, and

Take a look at the five new products

There are a number of cyanoacrylate

poor aesthetic outcomes due to bloom-

in the Born2Bond range to see what

monomers that are used to formulate

ing. These have limited their appeal

makes them special – Intertronics is

cyanoacrylate adhesives:

and application. MECA-based formula-

keen to help you use them to achieve

• Methyl (MCA) – primarily for met-

tions, which mitigate some of the issues

your production goals.

around blooming and smell, often com-

Visit https://www.intertronics.

pare poorly with ECA-based products in

co.uk/product-category/adhesives/

terms of speed and strength.

cyanoacrylate-adhesives/.

al-to-metal applications • Ethyl (ECA) – for plastic, metal, wood, ceramics and glass substrates (the most commonly used in both industry and household) • Methoxyethyl (MECA) – for low-odour, low-bloom formulations.

24 dpaonthenet.net

The Born2Bond range represents a big

About the author:

step forward in the technology of cy-

Peter Swanson is Managing Director at Intertronics.

anoacrylate adhesive chemistry. Due, in


Taurus Range of Standard RF Connectors

QUALITY HINGES

Brand new range of low cost, high quality standard coaxial connectors and adaptors

TALK TO THE EXPERTS.

Available from stock on a 1–3 day lead time Taurus connectors are provided with the same high level of quality controls as our market leading Precision and Pisces ranges

01827 63391 sales@goldwassallhinges.co.uk

BNC, TNC, N Type, UHF, Mini UHF, F Type, FME, SMA, SMB, SMC, SSMA, SSMB, SSMC, MCX, MMCX and Inter Series Adaptors For further information, please call us on +44 (0) 1245 347145, email sales@intelliconnect.co.uk or visit our website.

Whatever your hinge requirements, we offer a solution. Bespoke/Stock - UK maunfactured - Expert advice A different kind of Interconnect Solutions Provider

RF and Microwave Connectors, Adaptors and Cable Assemblies

www.intelliconnect.co.uk

IntConn_Taurus_Electronics.indd 1

We Guide You

+44 (0)1908 566 144

• www.ikont.eu • sales@iko.co.uk

19/05/2020

Linear Motor Driven Precision Positioning Stages


Feature: High-load ball screws

Figure 1: Thomson high-load ball screws are available with up to 15m screw lengths and with single or double nuts. They come in standard sizes of up to 160mm in diameter with up to 1,440 kN of dynamic load capacity

High-load ball screws – The motion control solution with higher load density M

otion engineering quiz: if you need to actuate a 500 kN axial load along a 1500mm stroke, do you use a roller screw or a ball screw?

If you reflectively said roller screw, you may not be familiar with high-load ball screws as an economical and simplified alternative. Roller screws have been promoted as the only technology of choice for

Screw Type

Diameter

Lead

(mm)

(mm)

Mounting Diameter (mm)

Overall Length (mm)

Dynamic Capacity (kN)

Static Capacity (kN)

Cost (€)

handling large loads when size is a constraint. In actuality, advances in ball screw technology make special versions viable candidates for high-load applications as

Standard Ball Nut 125

20

170

258

470

1534

€ 6700

well, and this is important because a high-

Thomson High Load Ball Screw

63

20

105

249

480

1110

€ 4.200

load ball screw is typically less than half

Roller Screw

75

20

150

191

490

1265

€ 10.500

26 dpaonthenet.net

the cost of a comparable roller screw at equivalent performance points.


Feature: High-load ball screws What’s the difference?

Standard L10 life expectancy calculation of a ball screw assembly

A ball screw consists of a threaded metal

Bearings are often specified to give an “L10” life. This is the life at which 10 percent of the ball screw assemblies in that application can be expected to have failed, due to classical fatigue failure or, alternatively, the life at which 90 percent will still be operating. The L10 life of the ball screw assembly is a theoretical life and may not represent the service life of the assembly. It can be calculated according to the following formula:

shaft with a nut that rides along its length as a motor rotates the shaft. The nut connects to a table, an arm or other load, as determined by the industrial process that is being automated. Recirculating ball bearings packaged, within the nut, contact the

L10 = (Cam/Load)3 Where:

L10 = Life expectancy (expressed in millions of revolutions)

About the author:

Cam = Dynamic capacity of the ball screw

threads and provide the load-bearing path. The coefficient of friction between the mating components is very low, which provides

Consider an automotive equipment as-

load capacity, and customised ball screw

a system efficiency that is typically greater

sembly application, that is running a load

assemblies according to specific applica-

than 90 percent. The load capacity of the

of 100kN, 24/7. Based on the standard life

tion demands are available upon request.

ball screw is then a function of the ball bear-

calculation, the product may last three-four

Specifying high-load ball screws in applica-

ing diameter, number of ball bearings, and

months, according to the fatigue failure

tions previously relegated to roller screws

the surface contact area. The combination

analysis and statistical life expectancy.

can save money, extend product life, or

of these parameters then defines the load

Implementing a high-load ball screw, how-

both. Any new application will require care-

capacity of the assembly and therefore the

ever, would double the load capacity and

ful analysis of load capacity, product life

resultant life of the components.

yield eight times the life. So, the manager

and cost, and in doing so, there may still

of each production unit has the option of

be some applications well suited to roller

For higher loads, design engineers have

going for higher load capacity, longer as-

screws. But given new ball screw technol-

specified roller screws in many applica-

sembly life, or the combination of the best

ogy advances that increase ball screw load

tions. In a roller screw, the load bearing

of both.

bearing capacity, it is now wise to consider

mechanism is a set of recirculating rollers,

Markus Brändle works to run and push the screw, screw jacks and linear bearings & guides business within Europe and Asia since 2017. He assists sales and customer support with technical product training. His role also involves on-site training with engineering groups at major OEM and distribution customers as well.

high-load ball screws in any application for

instead of balls. The rollers have a greater

Table 1 illustrates the advantage of a high-

which you might now be considering a roll-

total surface contact area than balls, which

load ball screw in an application that re-

er screw. It could pay off significantly.

increases the load carrying capacity and

quires a minimum of 470kN of dynamic

can also increase service life.

load capacity. A standard configuration

www.thomsonlinear.com

ball screw is capable of providing a soluThese benefits come at a premium. Com-

tion, but is twice the diameter and costs 60

pared to the relatively simple, time-tested

percent more. A roller screw is also capa-

ball system, the roller screws require exten-

ble but has a nut that is close to 50 percent

sive upfront precision machining and more

larger, at 150 percent the price of the com-

complex assembly. This contributes to the

parable high-load ball screw.

overall cost of the roller screw, as well as a larger footprint for final installation.

A new high-load alternative from Thomson

Thomson high-load ball screws are an

Thomson provides a standard range of

optimal fit for applications with axes that

high-load ball screws of up to 160mm di-

require accurate and safe movement of

ameter with a maximum 1400kN dynamic

Figure 2: Thomson ball screws offer a faultless, gentle recirculation of the balls and precise positioning

heavy loads, long and reliable life, and minimum maintenance.

Characteristics of a high-load ball screw Thomson has developed a high-load ball screw by implementing a unique thread form that increases load bearing capacity by four to eight times over traditional ball screws. This gives the application engineer the option of deploying a ball screw in any application that previously required a roller screw. Or, because the life of the assembly is a direct function of the load capacity (see L10 Life Expectancy Calculation), using a high-load ball screw in a low load application would extend the life of the product.

Figure 3: Thomson ball screws provide precision and the ability to handle high loads in a short stroke in injection moulding and metal fabrication equipment

dpaonthenet.net 27


Feature: Counterfeit parts

Does it fit your profile? I

n today’s global economic climate, it is easier than ever to procure counterfeit products intentionally or otherwise. In the world of industrial manufacturing equipment, especially, it represents a disaster waiting to happen for manufacturers and their customers. Counterfeit is defined as products being

turing production line, a fault or malfunction

misrepresented in their origins or quality. The

could potentially lead to a huge financial

production and sale of counterfeit goods is

impact through days’ or weeks’ worth of

a global, multi-billion-pound issue and one

downtime, or worse, a lawsuit.

that has serious economic ramifications for governments, businesses, and consumers.

Counterfeit product failures are often dan-

entering the supply chain. First, marking the

gerous in their own right, failing to meet

products and packaging with identifiable

There is evidence that the number of coun-

strength tests or pull-out forces of connec-

data and/or logo to protect the supply chain.

terfeit and ‘me-too’ copies available on the

tors, as examples. These types of failures

However, because these marks can be

market is growing. In industries like manu-

can lead to extensive damage to surround-

copied, it is not an entirely secure method

facturing, they are not just an irritation to

ing equipment and potentially present a risk

of protection. Secondly, a company’s Coun-

legitimate original equipment manufacturers

to employees who work in the vicinity of the

terfeit Prevention Policy is based on ensur-

(OEMs), they can also be extremely dan-

substandard product.

ing a secure supply chain. This is the most

gerous – with the potential to cause untold

effective method of preventing counterfeit

damage and jeopardise the safety of indi-

Project managers and buyers are under

viduals.

increased pressure to meet deadlines, and

components from entering the industry.

when OEM products are not available in the

With the industrial supply chain infiltrated

A point for discussion is when a product

lead time or price required, there is a tempta-

with copy-cat aluminium profiles, we must

states that it ‘is compatible with’ a recog-

tion to search for any source of supply. This

all be aware and ensure that businesses

nised brand or product. Just because the

grey, or parallel, market is where goods are

conduct themselves in compliance with the

same fittings can be used and the product

traded outside of the manufacturers’ author-

industry applicable rules and regulations.

looks the same, it does not necessarily

ised trading channels. Buying from these

mean the ancillary product will perform to

unauthorised channels, although not illegal,

Legitimate supply chains

comparable standards or offer the same

does carry risk. This is when counterfeit

As an individual, you should also question

product assurances as the original.

products are most likely to enter the supply

your supply chain. A compliant and respon-

chain, with potentially catastrophic results.

sible business will have no problems with

Many counterfeits are said to be manufac-

discussing these issues with you and will

tured to an expected standard, but instead,

Unfortunately, companies may not have re-

have a counterfeit policy in place for your

use cheaper and inferior materials that un-

alised that they were using an incomparable

reassurance. Ideally, and in accordance with

dermine product performance and integrity.

aluminium profile, but would ultimately be

ISO practice, all suppliers should be evalu-

This practice side-steps development with

held accountable. There are more and more

ated and proven to adhere to such a policy.

rigorous testing policies, often failing to meet

sophisticated counterfeits, or cheaper alter-

key safety criteria. This means that when

natives, available on the market – many of

To help you, and guard against receiving

these substandard products are sent out for

which claim to meet the same high stand-

counterfeit components, Minitec advises

integration into larger systems, there is an in-

ards as OEMs. These can go undetected,

its customers only to buy direct from the

creased risk of failure and a commercial risk

and wind up integrated into critical manu-

manufacturer or an authorised distributor. It

to the system integrator and end customer.

facturing systems.

is the suppliers’ responsibility to ensure that

What are you risking?

Protecting your business

If, for example, a counterfeit aluminium pro-

There are two main ways that manufacturers

file were installed as part of a large manufac-

can help to guard against counterfeit goods

the supply chain is legitimate and meets with

28 dpaonthenet.net

current regulations and standards. https://www.minitec.co.uk/



Feature: Electric motion & pneumatics

Simple electric drives that integrate the motion and control of electric drives in easy-to-use plug and work packages are a new option for linear motion applications

Simplified electric motion with combined pneumatics: An alternative to linear pneumatic cylinders M

any machine builders think that they need to choose between electric automation and pneumatic drives. Some claim that electric actuation is cheaper, easier to work with and more energy efficient. Others feel pneumatic technology is far more rugged, simpler and has a higher power density. But is this ‘one or the other’ approach always helpful in meeting the needs of the application?

ratio, accuracy, control behaviour, tor-

contrast, the greater the stroke length,

sional rigidity, efficiency, and robust-

the lower the end position force, and the

ness. Both pneumatic and electric tech-

shorter the holding duration, the more

nologies have specific advantages and

efficient electric drive technology is.

disadvantages, but energy efficiency wholly depends on the task at hand.

Of course, a technology cannot be selected based on energy aspects alone;

Let’s take some simple examples. Testing

other properties include purchase cost,

and measurements reveal that, for a sim-

ruggedness, weight, and the environ-

ple motion task, an electric drive can be

ment. Installation costs and operating

efficient. For a pressing or clamping op-

costs also play a significant part, and

eration, the level of process force and the

must be incorporated into the deci-

duration of the operation decide which

sion-making process. For example, a

technology is more efficient. However, if

lighter-weight pneumatic actuator can

In this article, Warren Harvard, Product

the application requires a holding force,

reduce the moving mass of a handling

Marketing Manager at Festo, argues

pneumatics is clearly at an advantage,

system, dramatically reducing the over-

the case for a more application-led ap-

especially for tasks that require large

all energy requirements. It’s clearly bet-

proach to linear motion, including hybrid

holding forces for extended periods.

ter to have an efficient overall system

solutions which can incorporate the sim-

Electric drives would require constant

rather than to focus on the efficiency of

plicity of pneumatics with the benefits of

electricity consumption to generate the

individual components – a principle that

electric automation.

holding force in the same applications.

is driving new advances in linear motion.

Each industrial application has its spe-

The following rules of thumb can be ap-

cific requirements with regard to techni-

plied: the shorter the stroke length, the

Emerging solutions in simple electric drives

cal criteria, such as speed, acceleration,

greater the end position force, and the

Simple electric drives that integrate the

load capacity and force required, cycle

longer the holding duration, the more

motion and control of electric drives in

time, holding duration, power-to-weight

efficient pneumatic technology is. In

easy-to-use plug and work packages are

30 dpaonthenet.net


Feature: Electric motion & pneumatics The parameters for the advancing and

Conclusion

retracting speed, plus the pressing and

In summary, there is a place for both

clamping force, can be set directly on the

pneumatic and electric drives as mod-

drive, along with the end position refer-

ern linear motion solutions. The opti-

ence and cushioning profile.

mum solution can be identified through understanding the application, technol-

Advanced user functions are provided

ogies and technical product data.

via IO-Link, including convenient remote control, parameter copy, backup func-

The Simplified Motion Series is an ideal

tion and read functions for advanced

entry point to upgrade to electric drive

process parameters. IO-Link enables

automation, with simple set-up and

the drives to communicate intelligently

control. Ready matched motor, drive

from the controllers all the way to the

and axis make selection safe and re-

cloud – for simple motions as well as

liable and clearly show the way ahead

easy handling, commissioning and actu-

for simple yet controlled motion. Festo’s

ation. It is also possible to control these

sizing software gives added assurance,

drives over IO-Link for flexible end posi-

not only enabling users to select and

tion adjustment with feedback from the

size their linear motion solutions quickly

integrated encoder.

and accurately, but also to generate the

About the author: Warren Harvard is the Product Marketing Manager at Festo.

required documentation and drawings a rapidly evolving solution. For example,

SMS electric drives can be simply and

for incorporation in their overall machine

the Simplified Motion Series (SMS) from

securely combined mechanically with

design.

Festo offers machine builders and users

other SMS actuators, with more ad-

an affordable solution that is easy to in-

vanced electric axes from Festo, or the

Furthermore, because these drives are

stall and operate. There is no need for

range of pneumatically driven guided

equipped with IO-Link as standard, they

external servo drives installed in control

actuators, using standardised interfaces

can be integrated seamlessly into fully

cabinets because the whole device is

and centring rings for accurate position-

digitalised

mounted directly on the machine.

ing and load transfer.

predictive maintenance regimes and

Comprising different linear and rotary

Usually, this works by using a ‘one-size-

contribution to optimising production

electromechanical components, togeth-

down’ principle X to Y to Z – making it

and energy efficiency.

er with a simple and application-opti-

easy to select the right drive for the right

mised combination of motor and servo

application. For total accuracy, machine

To access further resources about

drives (the integrated drive), the Simpli-

builders and specifiers can use the free

Simplified Motion Series, includ-

fied Motion Series integrates all the ele-

sizing tool online, which will advise on

ing video demonstrations, or to

ments of an electric drive solution into a

correct sizing based on the application

access the online sizing tool, visit

single package for simple motion tasks

requirements for speed and force con-

www.festo.co.uk/sms

such as repositioning, aligning, feeding,

trol.

environments,

supporting

smart air consumption to make a full

sorting, clamping, ejecting and stopping. Simplified set-up and operation make these electric drives perfect for simple motions between two mechanical end positions, without having to sacrifice electric drive motion characteristics such as pre-defined speed, gently cushioned movement into end positions, and selectable force for pressing or clamping functions. Thanks to the intuitive, quick and easy commissioning directly on the drive, configuration doesn’t require any software or specific know-how. The motion can be simply controlled via digital I/O (DIO), like a pneumatic valve. End position feedback, similar to that from a standard proximity sensor or cylinder switch, is provided on completion of the motion.

The Simplified Motion Series from Festo is an ideal entry point for a wide range of applications to upgrade to electric drive automation with simple set-up and control

dpaonthenet.net 31


Feature: Linear actuators

What criteria should I consider when selecting a linear actuator? T

here are many types of linear actuators available on the motion control market. Which type to choose, or even where to start the selection process, can be daunting. To help people with this process, Teknic outlines the key criteria to consider.

types of applications may be dictated by the budget or the machine selling price. These types of scenarios are more common for a low-volume OEM or even the DIY market. The overall cost may be the primary consideration for these types of

There are a several factors to consider

applications, even if it means lowering

when narrowing down the many choices

the performance goals to get in line with

of actuators to the one that makes the

the limited budget.

most sense for your project. Here are seven of the most important factors:

Let’s take a look at each type of linear

1. Travel distance (short to long)

actuator and evaluate them based on

2. Maximum moving load (light to

the application criteria listed previously.

heavy)

We’ll start the list with the least expen-

3. Maximum velocity (slow to fast)

sive option and end with the highest

4. Maximum acceleration (low to high)

cost option.

5. Positional accuracy (low to high)

Belt and pulley

6. Position repeatability (low to high) 7. Price (low, moderate, expensive)

where little costs are spared, and through-

Belts and pulleys are arguably the least

put and uptime are paramount. These

expensive linear actuator type. The

Linear actuator types

OEM type of applications have to perform

components are fairly simple in design

After you have evaluated the requirements

well day after day, and their downtime is

and there are many sources of compo-

of your application, you can start thinking

often measured in $/min.

nents available.

The best linear actuator choice for other

There are two types of belt systems:

about the optimal actuator choice. Some applications are true ‘money-makers’,

32 dpaonthenet.net


Feature: Linear actuators moving belt and fixed belt. We will list

expensive of the three rack and pinion

sired dimensions. This process is more

them separately because each one has

types, it also comes with some added

labour intensive and creates a design

its own advantages and considerations.

value in terms of its ability to move a

that is more accurate with less back-

heavy load at a fast speed. The helical

lash, but at a higher price point.

Moving belt

tooth design provides better accuracy

1. Price: low

and repeatability over the straight tooth

2. Travel distance: short

design, with a moderate increase in

1. Price: expensive

3. Maximum moving load: light

price. Here is a quick comparison:

2. Travel distance: medium

4. Maximum velocity: medium 5. Maximum acceleration: high

3. Maximum moving load: heavy Rack and pinion – Straight:

6. Positional accuracy: medium

1. Price: moderate

7. Position repeatability: medium

2. Travel distance: long

Fixed belt

4. Maximum velocity: fast 5. Maximum acceleration: medium

3. Maximum moving load: medium

6. Positional accuracy: medium

4. Maximum velocity: slow

7. Position repeatability: high

1. Price: low

5. Maximum acceleration: low

2. Travel distance: medium

6. Positional accuracy: low

3. Maximum moving load: light

7. Position repeatability: low

4. Maximum velocity: medium 5. Maximum acceleration: medium

Ball screw – Rolled

Ball screw – Ground 1. Price: expensive 2. Travel distance: long

Rack and pinion – Helical

3. Maximum moving load: medium

6. Positional accuracy: medium

1. Price: moderate

4. Maximum velocity: fast

7. Position repeatability: high

2. Travel distance: long

5. Maximum acceleration: high

3. Maximum moving load: heavy

6. Positional accuracy: high

So, it can be surmised that belts might

4. Maximum velocity: slow

7. Position repeatability: high

make sense if you have a relatively light

5. Maximum acceleration: low

load with medium acceleration/velocity

6. Positional accuracy: medium

It should be noted that within each

and a low budget.

7. Position repeatability: medium

actuator category is a sliding scale regarding the price point, that correlates

Lead screw

Rack and pinion – Roller

with various advantages. This means

The next option based on a low price

1. Price: moderate

that as you go from one actuator cate-

point is lead screws. Unlike a belt-driv-

2. Travel distance: long

gory to the next, there is some overlap

en system, lead screws should be used

3. Maximum moving load: heavy

regarding price and capability.

for relatively short stroke lengths. A lead

4. Maximum velocity: fast

screw may be a good choice for a light

5. Maximum acceleration: medium

For more information, find

load with moderate motion requirements,

6. Positional accuracy: medium

the full-length article at https://

on a tight budget. The nut can be made

7. Position repeatability: medium

www.teknic.com/choose-a-linearactuator/#advice. On the right-hand

from a variety of materials that have a variety of characteristics. Selecting the

All three rack and pinion designs can

side of the article is an indexed

optimal lead screw nut is an important

be used for long travel lengths and

outline that you can use to go

consideration when selecting the best

relatively heavy loads, so the choice

directly to the section that

design for your application.

often comes down to move times and

of greatest interest.

required positional resolution. If you have any questions or would

Lead screw 1. Price: low

Ball screw

like to discuss your own project with

2. Travel distance: short

Ball screws come in two major cate-

Teknic, please contact the company

3. Maximum moving load: light

gories: rolled ball screws and precision

at https://www.teknic.com/contact/.

4. Maximum velocity: slow

ground ball screws.

5. Maximum acceleration: low 6. Positional accuracy: medium

Rolled ball screws are made by pushing

7. Position repeatability: medium

metal bar stock through a set of rollers. This process is fast and efficient (pro-

Rack and pinion

viding the customer with a lower price)

Rack and pinions come in three different

because no metal is removed, but the

designs: straight teeth, helical teeth, and

downside is reduced accuracy and in-

roller. Of the three rack and pinion types,

creased backlash.

straight teeth is the least expensive, the helical tooth design is in the middle, and

Precision ground ball screws, just as

the roller design is the most expensive.

the name implies, start with bar stock

Although the roller design is the most

that is cut or ground down to the de-

dpaonthenet.net 33


Feature: Linear position tables

Small positioning tables can deliver big performance W

hen you need a fast, responsive positioning mechanism for semiconductor equipment, inspection instruments or assembly machines, choosing the right one can be difficult.

sitioning of linear-scale sensors.

• Long-term, maintenance-free op-

ing cables typically found in linear

eration. The Nano Linear NT Series

positioning tables, generating little

includes C-Lube linear bearings in

dust and achieving a high level of

most models, for long-term, main-

cleanliness. This occurs due to the

tenance-free operation.

moving magnet system design, in addition to the unique positioning

Finding a linear positioning table that ex-

stop the table when necessary.

This arrangement eliminates float-

of linear scale sensors on the bed.

hibits the high accuracy and thrust that

High thrust force and accuracy, despite their small size

these applications demand is only the

Features and benefits of the Nano Linear

For applications that require high-preci-

beginning of the selection process. You’ll

NT Series include:

sion positioning, a space-saving design

also need to fit the table into a confined

• Small size. The smallest table in

and a high level of cleanliness, Nano

space, while making sure it doesn’t pro-

the series measures only 11mm

Linear NT Series positioning tables from

duce excessive harmful dust.

in sectional height, 38mm in table

IKO International are a wise choice. IKO

width, and 62mm in overall length.

NT Series linear motor tables are struc-

To address these challenges, IKO In-

• Sturdy construction. The tables

tured with optical linear encoders with a

ternational incorporates two distinct

and beds are made from high-

resolution as low as 0.01µm and a high

features into its Nano Linear NT Series

carbon steel to provide exceptional

positioning repeatability of ±0.1µm. A

linear motor tables:

stability.

combination of parts with precise finish-

• A high-strength moving magnet.

• High-speed motion and quick re-

ing and assembly also helps to achieve

By combining a neodymium mag-

sponse, thanks to high-resolution

a high running accuracy of 1µm or less.

net and an optical linear scale into a

encoders. A 170g table providing

The result: accurate positioning and

moving table, Nano Linear NT can

25N thrust can achieve accelera-

peace of mind.

achieve a high thrust force of up to

tion/deceleration up to 10G.

70N, while achieving accurate positioning. • Moving magnet and unique po-

34 dpaonthenet.net

• Limit direction sensors, which

For more information about IKO

come standard and detect nois-

Nano Linear NT Series, contact

es and unexpected commands to

sales@iko.co.uk.


Buyers Guide: Geared Motors – 12mm to 90mm dia

Displays

Batteries & Chargers

Displays Displays Touchscreens Displays Touchscreens Industrial Pc’s Touchscreens Industrial Pc’s Display systems

Display systems Industrial Pc’s Offer Truly Economical Display Review Display Systems Ltd systemsSolutions to

www.review-displays.co.uk Review Display Systems Ltd 01959 563345 www.review-displays.co.uk Review Display Systems 01959 563345

www.review-displays.co.uk 01959 563345 Springs

Ltd

drive application problems with a comprehensive range of 3v to 24v DC motors, geared motors and accessories. Hybrid solutions also available at moderate cost.

Our products are widely used in industry, education and R&d markets, with some of the following as typical applications. Robotics, laboratory equipment, surveillance cameras, slot machines, shop displays, vehicle equipment, telecoms equipment,lighting and ventilation control. Locking mechanisims, machinery activators, shop displays etc etc.

MANUFACTURERS OF SPRINGS PRESSINGS • WIRE FORMS T: 0118 978 6573 F: 0118 989 4434 E: sales@simpsonsprings.co.uk www.simpsonsprings.co.uk

To advertise here contact

Andrew Quenault on 01732 359990 or email andrew.quenault@ imlgroup.co.uk

MFA/Como Felderland Lane, Worth, Deal, Kent CT14 0BT Tel: 01304 612132 Email: info@mfacomo.com Web: www.mfacomodrills.com

Fasteners & Fixings

• Tappex Thread Inserts Ltd – 60yrs+ of UK manufacturing excellence in Threaded Inserts for Plastics, Composites & Light Metal alloys • Tappex provide an Applications technical service, prototyping and bespoke installation tooling historically across multiple industry sectors: OEM/Automotive/ Medical & Industrial Equipment manufactures • Tappex offer fastening solutions produced from Brass, Steel, Stainless Steels & Titanium inserts with both Metric, Unified and British Standard threads Contact details: Tappex Thread Inserts Ltd Tel: +44 1789 206600 Email: sales@tappex.co.uk; New Website: www.tappex.co.uk Downloadable catalogues and applications advice on the website.

To advertise here contact

Andrew Quenault on

FREE MAGAZINE REGISTRATION

01732 359990

If you or/and a colleague would like to receive this title free of charge every month, you can register online by scanning the QR code below, this code can be used by more than one person or visiting the website: https://data.imlgroup.uk/dpa-reg-page/ or phone +44 (0)1732 359990

or email andrew.quenault@imlgroup.co.uk Open the QR code on your phone or launch the camera on an iPhone, scan the QR code above and complete the online form


MVK Fusion – Revolutionary 3-in-1 Module IO-Link valve islands

IO-Link button systems

Emergency stops Key and selector switches

Safety valves

Double safety valves IO-Link analog converters

Foot switches

Smart IO-Link sensors Enabling switches

DC motors

IO-Link grippers

IO-Link temperature sensors

Safety door systems

Door switch

IO-Link hubs

IO-Link inductive sensors

Valves

Safety command devices

IO-Link distance sensors Two-handed devices

IO-Link pressure sensors

Light curtains

IO-Link transponder systems

Digital sensors

Laser scanners

02 Safety

IO-Link

03 01

Standard IO

IO-Link inductive couplers

Three basic functions on one module 01/ standard digital sensors and actuators 02/ safety digital sensors and actuators 03/ IO-Link devices The PROFINET/PROFIsafe MVK Fusion module standardizes three components, opening the door to a one-module strategy.

www.murrelektronik.co.uk


Turn static files into dynamic content formats.

Create a flipbook
Issuu converts static files into: digital portfolios, online yearbooks, online catalogs, digital photo albums and more. Sign up and create your flipbook.