AUSTRALIAN ENVIROBLAST PTY LTD
abrasive blasting cleaning paint removal restoration
www.australianenviroblast.com.au
Abrasiive blasting is effective on a wide range of surfaces and structures around the home and in the garden
What is abrasive blasting? Abrasive blasting is: ]] fast ]] efficient ]] safe ]] effective ]] EPA approved Abrasive blasting (sometimes known as sand blasting) is a safe, environmentallyfriendly and cost effective way of removing rust, grease, paint, stains, and other types of coatings, corrosion and residue from almost any type of surface. It is also an effective means of smoothing, roughing up, or reshaping different types of surfaces and structures, and can also be used to create decorative finishes on concrete. During the process, abrasive material is propelled by at high pressure (powered by air or water) onto the surface or structure to be cleaned, and this strips away unwanted substances but leaves the original surfaces clean and contaminant free. Different types of abrasive materials (or media) can be used according to the objects or areas that need to be cleaned. These
include sand, metallic grit, shot, stone granulate, garnet, glass, chalk or soda. After abrasive blasting has been completed, surfaces and structures are extremely clean and are prepared ready for protective coatings to be re-applied or repainting to take place. The media used during abrasive blasting is reclaimed, as is any water used during wet abrasive blasting, while there is no dust produced during the process. Therefore, using the Quill Falcon Precision Dustless Kwikblast速 System means that this process does not cause environmental damage nor consume excessive natural resources, as there is significantly less dust and waste produced, and water used. At Australian Enviroblast, we are able to offer a full range of abrasive blasting services, all designed to meet the specific requirements of any job, no matter how large or small, or however delicate. Our mobile on site service means that we can travel to you, and we also have a facility at Seaford equipped with blasting and spray booths.
www.australianenviroblast.com.au
Applications
before
Abrasive blasting can be used in a wide variety of applications, and is as well-suited to tackling domestic and small-scale jobs as it is commercial projects, and it’s ideal for use in tight, out of the way places as well as on large surfaces. Around the home, abrasive blasting can be used for an enormous variety of cleaning, restoration and refurbishment work, and is entirely safe to employ in a domestic setting. It can also be used to create a non-slip surface on concrete, or to create textured finishes.
after
Applications Steel ]] ]] ]] ]] ]] ]] ]] ]] ]]
Brick ]] ]] ]] ]]
verandahs and carports gates lattice work trellises fences sheds pipes staircases beams exterior walls fences renderings sandstone
Stone ]] ]] ]] ]]
paving stones exterior walls fences garden statues or sculptures
Cement and concrete ]] ]] ]] ]]
driveways patios verandahs architectural concrete
Swimming pools ]] ]] ]]
pool floors pool walls pool surrounds
Wood ]] ]]
decking outdoor furniture
Trailers ]] ]] ]] ]] ]]
boat trailers car trailers horse floats box trailers motor bike trailers
Boats ]] ]]
Cars ]] ]] ]]
cleaning hulls preparation for repainting strip paint from bodywork clean car chassis clean car parts
Bikes ]] ]]
motorbike frames bicycle frames
Machinery ]] ]]
industrial machinery agricultural machinery
Any other application that requires a surface to be prepared for painting or coating
Australian Enviroblast hard at work cleaning an Adelaide swimming pool
before
Heritage brickwork comes up especially well after abrasive blasting, and can be restored it to its former glory
after
before Concrete is cleaned very effectively by abrasive blasting, as demonstrated here at the University of Adelaide, where the tannin covering the wood on this outdoor seating had streaked and discoloured the concrete base below.
after
About Us Australian Enviroblast was founded in 2009 by Mark Chiappin with the aim of introducing environmentally-friendly abrasive blasting serves to Australia. Using the revolutionary and technologically-advanced Quill Falcon Precision Dustless Kwikblast速 System, the Australian Enviroblast team of trained and skilled operators is able to remove a wide range of coatings, corrosion and residues from all types of structures, locations and equipment, while leaving surfaces clean and contaminant free. We have vast experience of jobs both large and small, in the commercial and the domestic fields.
both large-scale and more intricate, delicate jobs. Furthermore, the Quill Falcon Precision Dustless Kwikblast速 System is extremely safe and requires no encapsulation, meaning that other work can be carried out at the same time, saving both time and money.
Australian Enviroblast is licensed by the Environmental Protection Agency and adheres to its high standards of environmental safety with regards to air quality, noise, water quality and waste management. The company has won contracts in both the public and private sectors, including markets such as oil, gas, shipping, construction and the highways, and also has an impressive portfolio of domestic and small-scale abrasive blasting jobs, Australian Enviroblast is able to offer a including: full range of services, including: ]] rust removal ]] wet abrasive blasting ]] paint removal ]] dry abrasive blasting ]] graffiti removal ]] mechanical preparation ]] stain removal ]] UHP (pressure cleaning) ]] driveway and decking cleaning ]] industrial coatings ]] steel and fibreglass cleaning With a fleet of mobile equipment, Australian Enviroblast is able carry out on-site abrasive blasting and industrial coating, and offers efficient, flexible and cost-effective solutions that deliver outstanding results on
www.australianenviroblast.com.au
AUSTRALIAN ENVIROBLAST PTY LTD
Contact Us
www.australianenviroblast.com.au info@australianenviroblast.com.au tel: 0458 455668